summaryrefslogtreecommitdiff
path: root/arch/arm/boot/dts/iwg20d-q7-common.dtsi
AgeCommit message (Collapse)AuthorFilesLines
2023-06-21ARM: dts: Move .dts files to vendor sub-directoriesRob Herring1-375/+0
The arm dts directory has grown to 1559 boards which makes it a bit unwieldy to maintain and use. Past attempts stalled out due to plans to move .dts files out of the kernel tree. Doing that is no longer planned (any time soon at least), so let's go ahead and group .dts files by vendors. This move aligns arm with arm64 .dts file structure. There's no change to dtbs_install as the flat structure is maintained on install. The naming of vendor directories is roughly in this order of preference: - Matching original and current SoC vendor prefix/name (e.g. ti, qcom) - Current vendor prefix/name if still actively sold (SoCs which have been aquired) (e.g. nxp/imx) - Existing platform name for older platforms not sold/maintained by any company (e.g. gemini, nspire) The whole move was scripted with the exception of MAINTAINERS and a few makefile fixups. Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Acked-by: Michal Simek <michal.simek@amd.com> #Xilinx Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Acked-by: Neil Armstrong <neil.armstrong@linaro.org> Acked-by: Paul Barker <paul.barker@sancloud.com> Acked-by: Tony Lindgren <tony@atomide.com> Acked-by: Gregory CLEMENT <gregory.clement@bootlin.com> Acked-by: Heiko Stuebner <heiko@sntech.de> Acked-by: Wei Xu <xuwei5@hisilicon.com> #hisilicon Acked-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Nick Hawkins <nick.hawkins@hpe.com> Acked-by: Baruch Siach <baruch@tkos.co.il> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Reviewed-by: Andre Przywara <andre.przywara@arm.com> Acked-by: Andre Przywara <andre.przywara@arm.com> Reviewed-by: Claudiu Beznea <claudiu.beznea@microchip.com> Acked-by: Peter Rosin <peda@axentia.se> Acked-by: Jesper Nilsson <jesper.nilsson@axis.com> Acked-by: Sudeep Holla <sudeep.holla@arm.com> Acked-by: Florian Fainelli <f.fainelli@gmail.com> #broadcom Acked-by: Manivannan Sadhasivam <mani@kernel.org> Reviewed-by: Jisheng Zhang <jszhang@kernel.org> Acked-by: Patrice Chotard <patrice.chotard@foss.st.com> Acked-by: Romain Perier <romain.perier@gmail.com> Acked-by: Alexandre TORGUE <alexandre.torgue@st.com> Acked-by: Shawn Guo <shawnguo@kernel.org> Acked-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com> Acked-by: Enric Balletbo i Serra <eballetbo@gmail.com> Signed-off-by: Rob Herring <robh@kernel.org>
2023-06-02ARM: dts: iwg20d-q7-common: Fix backlight pwm specifierGeert Uytterhoeven1-1/+1
make dtbs_check: arch/arm/boot/dts/renesas/r8a7743-iwg20d-q7.dtb: backlight: pwms: [[58, 0, 5000000], [0]] is too long From schema: Documentation/devicetree/bindings/leds/backlight/pwm-backlight.yaml arch/arm/boot/dts/renesas/r8a7743-iwg20d-q7-dbcm-ca.dtb: backlight: pwms: [[67, 0, 5000000], [0]] is too long From schema: Documentation/devicetree/bindings/leds/backlight/pwm-backlight.yaml arch/arm/boot/dts/renesas/r8a7744-iwg20d-q7-dbcm-ca.dtb: backlight: pwms: [[67, 0, 5000000], [0]] is too long From schema: Documentation/devicetree/bindings/leds/backlight/pwm-backlight.yaml arch/arm/boot/dts/renesas/r8a7744-iwg20d-q7.dtb: backlight: pwms: [[58, 0, 5000000], [0]] is too long From schema: Documentation/devicetree/bindings/leds/backlight/pwm-backlight.yaml PWM specifiers referring to R-Car PWM Timer Controllers should contain only two cells. Fix this by dropping the bogus third cell. Fixes: 6f89dd9e9325d05b ("ARM: dts: iwg20d-q7-common: Add LCD support") Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Link: https://lore.kernel.org/r/6e5c3167424a43faf8c1fa68d9667b3d87dc86d8.1684855911.git.geert+renesas@glider.be
2022-02-24ARM: dts: renesas: Align GPIO hog names with dtschemaGeert Uytterhoeven1-1/+1
Dtschema expects GPIO hogs to end with a "hog" suffix. Also, the convention for node names is to use hyphens, not underscores. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Link: https://lore.kernel.org/r/972d982024cbb04dcf29b2a0ac6beaf41e66c363.1645705927.git.geert+renesas@glider.be
2021-09-28ARM: dts: renesas: Add compatible properties to KSZ9031 Ethernet PHYsGeert Uytterhoeven1-0/+2
Add compatible values to Ethernet PHY subnodes representing Micrel KSZ9031 PHYs on RZ/G1 boards. This allows software to identify the PHY model at any time, regardless of the state of the PHY reset line. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Tested-by: Biju Das <biju.das.jz@bp.renesas.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Link: https://lore.kernel.org/r/ce8ae6b199fa244315a008ae31891a808ca1948d.1631174218.git.geert+renesas@glider.be
2021-03-08ARM: dts: renesas: Group tuples in playback and capture propertiesGeert Uytterhoeven1-2/+2
To improve human readability and enable automatic validation, the tuples in "playback" and "capture" properties in sound device nodes should be grouped using angle brackets. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Link: https://lore.kernel.org/r/20210204130517.1647073-3-geert+renesas@glider.be
2020-09-25ARM: dts: iwg20d-q7-common: Fix touch controller probe failureBiju Das1-1/+14
As per the iWave RZ/G1M schematic, the signal LVDS_PPEN controls the supply voltage for the touch panel, LVDS receiver and RGB LCD panel. Add a regulator for these device nodes and remove the powerdown-gpios property from the lvds-receiver node as it results in a touch controller driver probe failure. Fixes: 6f89dd9e9325 ("ARM: dts: iwg20d-q7-common: Add LCD support") Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Link: https://lore.kernel.org/r/20200924080535.3641-1-biju.das.jz@bp.renesas.com Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2019-12-20ARM: dts: renesas: Group tuples in regulator-gpio states propertiesGeert Uytterhoeven1-2/+1
To improve human readability and enable automatic validation, the tuples in the "states" properties of device nodes compatible with "regulator-gpio" should be grouped, as reported by "make dtbs_check": $ make dtbs_check DT_SCHEMA_FILES=Documentation/devicetree/bindings/regulator/gpio-regulator.yaml arch/arm/boot/dts/r8a7791-koelsch.dt.yaml: regulator-vccq-sdhi0: states:0: Additional items are not allowed (1800000, 0 were unexpected) arch/arm/boot/dts/r8a7791-koelsch.dt.yaml: regulator-vccq-sdhi0: states:0: [3300000, 1, 1800000, 0] is too long arch/arm/boot/dts/r8a7791-koelsch.dt.yaml: regulator-vccq-sdhi1: states:0: Additional items are not allowed (1800000, 0 were unexpected) arch/arm/boot/dts/r8a7791-koelsch.dt.yaml: regulator-vccq-sdhi1: states:0: [3300000, 1, 1800000, 0] is too long arch/arm/boot/dts/r8a7791-koelsch.dt.yaml: regulator-vccq-sdhi2: states:0: Additional items are not allowed (1800000, 0 were unexpected) arch/arm/boot/dts/r8a7791-koelsch.dt.yaml: regulator-vccq-sdhi2: states:0: [3300000, 1, 1800000, 0] is too long ... Fix this by grouping the tuples using angle brackets. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Link: https://lore.kernel.org/r/20191213164115.3697-2-geert+renesas@glider.be Reviewed-by: Ulrich Hecht <uli+renesas@fpond.eu>
2019-12-09ARM: dts: iwg20d-q7-common: Add LCD supportFabrizio Castro1-0/+85
The iwg20d comes with a 7" capacitive touch screen, therefore add support for it. Signed-off-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Link: https://lore.kernel.org/r/1573660292-10629-11-git-send-email-fabrizio.castro@bp.renesas.com Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2019-06-21ARM: dts: iwg20d-q7-common: Fix SDHI1 VccQ regularorFabrizio Castro1-1/+1
SDR50 isn't working anymore because the GPIO regulator driver is using descriptors since commit d6cd33ad7102 ("regulator: gpio: Convert to use descriptors") which in turn causes the system to use the polarity of the GPIOs (as specified in the DT) for selecting the states, but the polarity specified in the DT is wrong. This patch fixes the regulator DT definition, and that fixes SDR50. Fixes: 029efb3a03c5 ("ARM: dts: iwg20d-q7: Add SDHI1 support") Signed-off-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2018-12-05ARM: dts: iwg20d-q7-common: Move cmt/rwdt node out of RZ/G1M SOMBiju Das1-0/+9
The iWave RZ/G1N board is almost identical to RZ/G1M. cmt and rwdt modules are SoC specific and should be part of board dts rather than SoM dtsi. By moving these nodes to the common dtsi it allows cmt and rwdt to be enabled on both of these boards with less lines of code. Signed-off-by: Biju Das <biju.das@bp.renesas.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2018-09-28ARM: dts: iwg20d-q7-common: Move pciec node out of common dtsiBiju Das1-4/+0
PCIe is not populated by default on iWave RZ/G1N board. RZ/G1N board is almost identical to RZ/G1M. In order to reuse the common dtsi for both the boards, it is required to move pcie node from common dtsi to board specific dts. Signed-off-by: Biju Das <biju.das@bp.renesas.com> Reviewed-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2018-07-23ARM: dts: convert to SPDX identifier for Renesas boardsWolfram Sang1-4/+1
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Acked-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Acked-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2017-12-20ARM: dts: iwg20d-q7-common: Sound DMA support via DVC on DTSBiju Das1-2/+25
DMA transfer uses DVC DMA DMApp [MEM] -> [SRC] -> [DVC] -> [SSIU] -> [SSI] DMA DMApp [MEM] <- [DVC] <- [SRC] <- [SSIU] <- [SSI] Signed-off-by: Biju Das <biju.das@bp.renesas.com> Reviewed-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com> Acked-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2017-12-20ARM: dts: iwg20d-q7-common: Sound DMA support via SRC on DTSBiju Das1-2/+2
DMA transfer to/from SRC DMA DMApp [MEM] -> [SRC] -> [SSIU] -> [SSI] DMA DMApp [MEM] <- [SRC] <- [SSIU] <- [SSI] Current sound driver is supporting SSI/SRC random connection. So, this patch is trying SSI1 -> SRC3 SSI0 <- SRC2 Signed-off-by: Biju Das <biju.das@bp.renesas.com> Reviewed-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com> Acked-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2017-12-20ARM: dts: iwg20d-q7-common: Sound DMA support via BUSIF on DTSBiju Das1-5/+0
DMA transfer to/from SSIU DMA [MEM] -> [SSIU] -> [SSI] DMA [MEM] <- [SSIU] <- [SSI] Signed-off-by: Biju Das <biju.das@bp.renesas.com> Reviewed-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com> Acked-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2017-12-20ARM: dts: iwg20d-q7-common: Sound DMA support on DTSBiju Das1-2/+2
DMA transfer to/from SSI DMA [MEM] -> [SSI] DMA [MEM] <- [SSI] Signed-off-by: Biju Das <biju.das@bp.renesas.com> Reviewed-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com> Acked-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2017-12-20ARM: dts: iwg20d-q7-common: Sound PIO supportBiju Das1-0/+46
Enable sound PIO support on carrier board. Signed-off-by: Biju Das <biju.das@bp.renesas.com> Reviewed-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com> Acked-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2017-12-20ARM: dts: iwg20d-q7-common: Enable SGTL5000 audio codecBiju Das1-0/+24
This patch enables SGTL5000 audio codec on the carrier board. Signed-off-by: Biju Das <biju.das@bp.renesas.com> Reviewed-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2017-11-27ARM: dts: iwg20d-q7: Enable PCIe ControllerBiju Das1-0/+8
Enable PCIe Controller & set PCIe bus clock frequency. Signed-off-by: Biju Das <biju.das@bp.renesas.com> Reviewed-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2017-11-27ARM: dts: iwg20d-q7-common: Add can0 support to carrier boardFabrizio Castro1-0/+12
This patch enables CAN0 interface exposed through connector J20 on the carrier board. Signed-off-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com> Reviewed-by: Biju Das <biju.das@bp.renesas.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2017-11-27ARM: dts: iwg20d-q7: Add support for ttySC3Fabrizio Castro1-0/+14
Signed-off-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com> Signed-off-by: Chris Paterson <chris.paterson2@renesas.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2017-10-12ARM: dts: iwg20d-q7: Enable HS-USBBiju Das1-1/+6
Enable HS-USB device for the iWave G20D-Q7 carrier board based on RZ/G1M. Also disable the host mode support on usb otg port by default to avoid pin conflicts. Signed-off-by: Biju Das <biju.das@bp.renesas.com> Signed-off-by: Chris Paterson <chris.paterson2@renesas.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2017-10-09ARM: dts: iwg20d-q7: Rework DT architectureFabrizio Castro1-0/+147
Since the same carrier board may host RZ/G1M and RZ/G1N based Systems on Module, the DT architecture for iwg20d-q7 needs better decoupling. This patch provides: * iwg20d-q7-common.dtsi - its purpose is to define the carrier board definitions, and its content is basically the same as the previous version of r8a7743-iwg20d-q7.dts, only it has no reference to the SoM .dtsi, and that's why the filename doesn't mention the SoC name any more. * r8a7743-iwg20d-q7.dts - its new purpose is to put together the SoM .dtsi (r8a7743-iwg20m.dtsi) and the carrier board .dtsi defined by this very patch, along with "model" and "compatible" properties. The final DT architecture to describe the board is now: r8a7743-iwg20d-q7.dts # Carrier Board + SoM ├── r8a7743-iwg20m.dtsi # SoM │   └── r8a7743.dtsi # SoC └── iwg20d-q7-common.dtsi # Carrier Board and maximizes the reuse of the definitions for the carrier board and for the SoM. Signed-off-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com> Signed-off-by: Chris Paterson <chris.paterson2@renesas.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
generated by cgit v1.2.3 (git 2.39.0) at 2025-09-25 21:18:22 +0300