summaryrefslogtreecommitdiff
path: root/arch/arm/boot/dts/at91sam9260.dtsi
AgeCommit message (Collapse)AuthorFilesLines
2023-06-21ARM: dts: Move .dts files to vendor sub-directoriesRob Herring1-796/+0
The arm dts directory has grown to 1559 boards which makes it a bit unwieldy to maintain and use. Past attempts stalled out due to plans to move .dts files out of the kernel tree. Doing that is no longer planned (any time soon at least), so let's go ahead and group .dts files by vendors. This move aligns arm with arm64 .dts file structure. There's no change to dtbs_install as the flat structure is maintained on install. The naming of vendor directories is roughly in this order of preference: - Matching original and current SoC vendor prefix/name (e.g. ti, qcom) - Current vendor prefix/name if still actively sold (SoCs which have been aquired) (e.g. nxp/imx) - Existing platform name for older platforms not sold/maintained by any company (e.g. gemini, nspire) The whole move was scripted with the exception of MAINTAINERS and a few makefile fixups. Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Acked-by: Michal Simek <michal.simek@amd.com> #Xilinx Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Acked-by: Neil Armstrong <neil.armstrong@linaro.org> Acked-by: Paul Barker <paul.barker@sancloud.com> Acked-by: Tony Lindgren <tony@atomide.com> Acked-by: Gregory CLEMENT <gregory.clement@bootlin.com> Acked-by: Heiko Stuebner <heiko@sntech.de> Acked-by: Wei Xu <xuwei5@hisilicon.com> #hisilicon Acked-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Nick Hawkins <nick.hawkins@hpe.com> Acked-by: Baruch Siach <baruch@tkos.co.il> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Reviewed-by: Andre Przywara <andre.przywara@arm.com> Acked-by: Andre Przywara <andre.przywara@arm.com> Reviewed-by: Claudiu Beznea <claudiu.beznea@microchip.com> Acked-by: Peter Rosin <peda@axentia.se> Acked-by: Jesper Nilsson <jesper.nilsson@axis.com> Acked-by: Sudeep Holla <sudeep.holla@arm.com> Acked-by: Florian Fainelli <f.fainelli@gmail.com> #broadcom Acked-by: Manivannan Sadhasivam <mani@kernel.org> Reviewed-by: Jisheng Zhang <jszhang@kernel.org> Acked-by: Patrice Chotard <patrice.chotard@foss.st.com> Acked-by: Romain Perier <romain.perier@gmail.com> Acked-by: Alexandre TORGUE <alexandre.torgue@st.com> Acked-by: Shawn Guo <shawnguo@kernel.org> Acked-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com> Acked-by: Enric Balletbo i Serra <eballetbo@gmail.com> Signed-off-by: Rob Herring <robh@kernel.org>
2023-05-22ARM: dts: at91: use clock-controller name for PMC nodesClaudiu Beznea1-1/+1
Use clock-controller generic name for PMC nodes. Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com> Link: https://lore.kernel.org/r/20230517094119.2894220-2-claudiu.beznea@microchip.com
2022-09-16ARM: dts: at91: Add `atmel,usart-mode` required property to serial nodesSergiu Moga1-0/+8
Add the missing required DT property `atmel,usart-mode` to the serial nodes of Atmel/Microchip DT files. Signed-off-by: Sergiu Moga <sergiu.moga@microchip.com> Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com> Link: https://lore.kernel.org/r/20220913142205.162399-4-sergiu.moga@microchip.com
2022-07-04ARM: dts: at91: use generic name for reset controllerClaudiu Beznea1-1/+1
Use generic name for reset controller of AT91 devices to comply with DT specifications. Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com> Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://lore.kernel.org/r/20220610092414.1816571-2-claudiu.beznea@microchip.com
2021-09-15ARM: dts: at91: at91sam9260: add pinctrl labelClaudiu Beznea1-1/+1
Add label for pinctrl node. Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com> Link: https://lore.kernel.org/r/20210816064416.1630674-2-claudiu.beznea@microchip.com
2020-12-01ARM: dts: at91: remove deprecated ADC propertiesAlexandre Belloni1-25/+0
atmel,adc-res, atmel,adc-res-names and the trigger nodes are not parsed by the driver anymore and the information is now defined in the driver data. Also remove the leftover #address-cells and #size-cells that were used when the trigger nodes had a unit-address. Finally, the default is already to use the highest resoution. Remove atmel,adc-use-res from the SoC dtsi. Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Reviewed-by: Ludovic Desroches <ludovic.desroches@microchip.com> Link: https://lore.kernel.org/r/20201128222818.1910764-11-alexandre.belloni@bootlin.com
2020-09-16ARM: dts: at91: add unit-address to memory nodeAlexandre Belloni1-1/+1
The memory node requires a unit-address, add it. Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Reviewed-by: Nicolas Ferre <nicolas.ferre@microchip.com> Link: https://lore.kernel.org/r/20200831171129.3886857-7-alexandre.belloni@bootlin.com
2020-09-16ARM: dts: at91: move mmc pinctrl-names property to board dtsAlexandre Belloni1-1/+0
Having the pinctrl-names property in the dtsi leads to dtbs_check warnings when the board dts doesn't define pinctrl-0. Instead, move the property to the board dts actually using the mmc node. Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Reviewed-by: Nicolas Ferre <nicolas.ferre@microchip.com> Link: https://lore.kernel.org/r/20200831171129.3886857-5-alexandre.belloni@bootlin.com
2020-09-03ARM: dts: at91: fix sram nodesAlexandre Belloni1-0/+3
The ranges, #address-cells and #size-cells properties are mandatory, add them to the sram nodes. Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Reviewed-by: Nicolas Ferre <nicolas.ferre@microchip.com> Link: https://lore.kernel.org/r/20200831171129.3886857-4-alexandre.belloni@bootlin.com
2020-09-03ARM: dts: at91: fix cpu nodeAlexandre Belloni1-2/+3
The reg property is mandatory for cpu nodes, also fix the #address-cells of the cpus node that has to be at least 1. Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Reviewed-by: Nicolas Ferre <nicolas.ferre@microchip.com> Link: https://lore.kernel.org/r/20200831171129.3886857-2-alexandre.belloni@bootlin.com
2019-12-10ARM: dts: at91: rearrange kizbox dts using aliases nodesKamel Bouhara1-2/+2
Use aliases nodes to easy kizbox dts readability. Signed-off-by: Kamel Bouhara <kamel.bouhara@bootlin.com> Link: https://lore.kernel.org/r/20191205223021.1370083-1-kamel.bouhara@bootlin.com Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2019-12-10ARM: dts: at91: Reenable UART TX pull-upsIngo van Lil1-6/+6
Pull-ups for SAM9 UART/USART TX lines were disabled in a previous commit. However, several chips in the SAM9 family require pull-ups to prevent the TX lines from falling (and causing an endless break condition) when the transceiver is disabled. From the SAM9G20 datasheet, 32.5.1: "To prevent the TXD line from falling when the USART is disabled, the use of an internal pull up is mandatory.". This commit reenables the pull-ups for all chips having that sentence in their datasheets. Fixes: 5e04822f7db5 ("ARM: dts: at91: fixes uart pinctrl, set pullup on rx, clear pullup on tx") Signed-off-by: Ingo van Lil <inguin@gmx.de> Cc: Peter Rosin <peda@axentia.se> Link: https://lore.kernel.org/r/20191203142147.875227-1-inguin@gmx.de Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2019-05-21treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 4Thomas Gleixner1-2/+1
Based on 1 normalized pattern(s): licensed under gplv2 or later extracted by the scancode license scanner the SPDX license identifier GPL-2.0-or-later has been chosen to replace the boilerplate/reference in 118 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Jilayne Lovejoy <opensource@jilayne.com> Reviewed-by: Steve Winslow <swinslow@gmail.com> Reviewed-by: Allison Randal <allison@lohutok.net> Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190519154040.961286471@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-01-30ARM: dts: Kill off skeleton{64}.dtsiRob Herring1-1/+3
Remove the usage of skeleton.dtsi in the remaining dts files. It was deprecated since commit 9c0da3cc61f1 ("ARM: dts: explicitly mark skeleton.dtsi as deprecated"). This will make adding a unit-address to memory nodes easier. The main tricky part to removing skeleton.dtsi is we could end up with no /memory node at all when a bootloader depends on one being present. I hacked up dtc to check for this condition. Acked-by: Linus Walleij <linus.walleij@linaro.org> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Acked-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Acked-by: Neil Armstrong <narmstrong@baylibre.com> Acked-by: Antoine Tenart <antoine.tenart@bootlin.com> Acked-by: Alexandre TORGUE <alexandre.torgue@st.com> Acked-by: Robert Jarzmik <robert.jarzmik@free.fr> Acked-by: Vladimir Zapolskiy <vz@mleia.com> Tested-by: Kevin Hilman <khilman@baylibre.com> Reviewed-by: Kevin Hilman <khilman@baylibre.com> Tested-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Signed-off-by: Rob Herring <robh@kernel.org> Reviewed-by: Gregory CLEMENT <gregory.clement@bootlin.com> Tested-by: Gregory CLEMENT <gregory.clement@bootlin.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2018-11-21ARM: dts: at91: at91sam9260: switch to new clock bindingsAlexandre Belloni1-278/+30
Switch at91sam9260 and at91sam9g20 boards to the new PMC clock bindings. Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2018-03-21ARM: dts: at91sam9260: pullup rx on usart0Peter Rosin1-2/+2
For consistency with all other serial pins, add this pullup. It also prevents the signal from floating and so consuming a useless extra amount of power in crowbarred state if nothing is connected to RX. Signed-off-by: Peter Rosin <peda@axentia.se> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2018-03-21ARM: dts: at91: fixes uart pinctrl, set pullup on rx, clear pullup on txPeter Rosin1-10/+10
Remove pullup on uart TX signals, they are push-pull outputs thus pullups are pointless. Add pullup on uart RX signals, they prevent the RX signals to be left floating and so consuming a useless extra amount of power in crowbarred state if nothing is connected to RX. Signed-off-by: Peter Rosin <peda@axentia.se> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2017-12-31ARM: dts: at91: at91sam9260: TC blocks are also simple-mfd and syscon devicesAlexandre Belloni1-2/+6
Add simple-mfd and syscon to the TC blocks to allow to register one of the channels as clocksource properly at boot time and free up the remaining channels for other use. Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2017-10-20arm: dts: fix unit-address leading 0sRob Herring1-1/+1
Fix dtc warnings for 'simple_bus_reg' due to leading 0s. Converted using the following command: perl -p -i -e 's/\@0+([0-9a-f])/\@$1/g' `find arch/arm/boot/dts -type -f -name '*.dts*' Dropped changes to ARM, Ltd. boards LED nodes and manually fixed up some occurrences of uppercase hex. Signed-off-by: Rob Herring <robh@kernel.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2017-05-31ARM: dts: at91: Switch to the new NAND bindingsBoris Brezillon1-21/+7
Use the new EBI/NAND bindings to declare NAND chips and remove old NAND nodes along the way. Note that we keep using old bindings in at91rm9200.dtsi because this SoC is not supported by the EBI driver. Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com> Tested-by: Peter Rosin <peda@axentia.se> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2017-05-31ARM: dts: at91: Declare EBI/NAND controllersBoris Brezillon1-0/+37
Declare new nodes for the EBI and NAND controllers embedded in various at91/sama5 SoCs. Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2016-10-20ARM: dts: at91: fixes dbgu pinctrl, set pullup on rx, clear pullup on txSylvain Rochet1-2/+2
Remove pullup on dbgu DTXD signal, it is a push-pull output thus the pullup is pointless. Add pullup on dbgu DRXD signal, it prevents the DRXD signal to be left floating and so consuming a useless extra amount of power in crowbarred state if nothing is externally connected to dbgu. Signed-off-by: Sylvain Rochet <sylvain.rochet@finsecur.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2016-07-15ARM: dts: at91: fix i2c-gpio node nameAlexandre Belloni1-1/+1
i2c-gpio doesn't need a reg property. Change the node names to i2c-gpio-x as used in other dts to remove the unit-address. Solves: Warning (unit_address_vs_reg): Node /i2c@0 has a unit name, but no reg property Warning (unit_address_vs_reg): Node /i2c@1 has a unit name, but no reg property Warning (unit_address_vs_reg): Node /i2c@2 has a unit name, but no reg property Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2016-07-15ARM: dts: at91: Fix ADC trigger nodesAlexandre Belloni1-8/+4
The triggers don't need a reg property, remove it when prenset. Also remove the unit-address from their name. This solves: Warning (unit_address_vs_reg): Node /ahb/apb/adc@fc034000/trigger@0 has a unit name, but no reg property Warning (unit_address_vs_reg): Node /ahb/apb/adc@fc034000/trigger@1 has a unit name, but no reg property Warning (unit_address_vs_reg): Node /ahb/apb/adc@fc034000/trigger@2 has a unit name, but no reg property Warning (unit_address_vs_reg): Node /ahb/apb/adc@fc034000/trigger@3 has a unit name, but no reg property Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2016-06-07ARM: dts: at91: at91sam9260: Remove leading zeros in OHCI node.Raashid Muhammed1-1/+1
Remove leading zeros in OHCI node for at91sam9260 based boards. Signed-off-by: Raashid Muhammed <raashidmuhammed@zilogic.com> Reviewed-by: Vijay Kumar B. <vijaykumar@bravegnu.org> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2015-10-19ARM: at91/dt: use syscon for PMCAlexandre Belloni1-1/+1
The PMC is not only used to drive the clocks but also has some registers related to other functions. One of those is for example the USB gadget bias. Using a syscon allows to properly separate those functions. Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2015-08-07ARM: at91/dt: at91sam9260: use slow clock where necessaryAlexandre Belloni1-4/+7
The watchdog, the reset controller, the real-time timer, the shutdown controller, the timer counters need the slow clock, add it where necessary. Acked-by: Boris Brezillon <boris.brezillon@free-electrons.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2015-05-22ARM: at91/dt: remove useless usb clockBoris Brezillon1-2/+2
The ohci driver now calls clk_set_rate on the uhpck clock (which forwards set_rate requests to its parent: the usb clock). Remove useless references to usb clocks from ohci definitions. Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2015-04-22Merge tag 'armsoc-cleanup' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC cleanups from Olof Johansson: "We've got a fairly large cleanup branch this time. The bulk of this is removal of non-DT platforms of several flavors: - Atmel at91 platforms go full-DT, with removal of remaining board-file based support - OMAP removes legacy board files for three more platforms - removal of non-DT mach-msm, newer Qualcomm platforms now live in mach-qcom - Freescale i.MX25 also removes non-DT platform support" Most of the rest of the changes here are fallout from the above, i.e. for example removal of drivers that now lack platforms, etc. * tag 'armsoc-cleanup' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (58 commits) mmc: Remove msm_sdcc driver gpio: Remove gpio-msm-v1 driver ARM: Remove mach-msm and associated ARM architecture code ARM: shmobile: cpuidle: Remove the pointless default driver ARM: davinci: dm646x: Add interrupt resource for McASPs ARM: davinci: irqs: Correct McASP1 TX interrupt definition for DM646x ARM: davinci: dm646x: Clean up the McASP DMA resources ARM: davinci: devices-da8xx: Add support for McASP2 on da830 ARM: davinci: devices-da8xx: Clean up and correct the McASP device creation ARM: davinci: devices-da8xx: Add interrupt resource to McASP structs ARM: davinci: devices-da8xx: Add resource name for the McASP DMA request ARM: OMAP2+: Remove legacy support for omap3 TouchBook ARM: OMAP3: Remove legacy support for devkit8000 ARM: OMAP3: Remove legacy support for EMA-Tech Stalker board ARM: shmobile: Consolidate the pm code for R-Car Gen2 ARM: shmobile: r8a7791: Correct SYSCIER value ARM: shmobile: r8a7790: Correct SYSCIER value ARM: at91: remove old setup ARM: at91: sama5d4: remove useless map_io ARM: at91: sama5 use SoC detection infrastructure ...
2015-03-21Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller1-4/+3
Conflicts: drivers/net/ethernet/emulex/benet/be_main.c net/core/sysctl_net_core.c net/ipv4/inet_diag.c The be_main.c conflict resolution was really tricky. The conflict hunks generated by GIT were very unhelpful, to say the least. It split functions in half and moved them around, when the real actual conflict only existed solely inside of one function, that being be_map_pci_bars(). So instead, to resolve this, I checked out be_main.c from the top of net-next, then I applied the be_main.c changes from 'net' since the last time I merged. And this worked beautifully. The inet_diag.c and sysctl_net_core.c conflicts were simple overlapping changes, and were easily to resolve. Signed-off-by: David S. Miller <davem@davemloft.net>
2015-03-13ARM: at91/dt: introduce atmel,<chip>-dbguAlexandre Belloni1-1/+1
The DBGU is not a simple UART and we need to be able to distinguish it from the other UARTs, in particular to get its address and check the chip id. Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2015-03-11ARM: at91/dt: fix at91 udc compatible stringsBoris Brezillon1-1/+1
The at91rm9200, at91sam9260, at91sam9261 and at91sam9263 SoCs have slightly different UDC IPs. Those differences were previously handled with cpu_is_at91xx macro which are about to be dropped for multi-platform support, thus we need to change compatible strings. Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2015-03-08ARM: at91/dt: fix macb compatible stringsBoris BREZILLON1-1/+1
Some at91 SoCs embed a 10/100 Mbit Ethernet IP, that is based on the at91sam9260 SoC. Fix at91 DTs accordingly. Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com> Reviewed-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-03-04ARM: at91/dt: keep watchdog running in idle modeMichel Marti1-1/+0
Since turning on idle-halt in commit fe46aa679f12 (ARM: at91/dt: add sam9 watchdog default options to SoCs), SoCs compatible with at91sam9260-wdt no longer reboot if the watchdog times out while the CPU is in idle state. Removing the 'idle-halt' flag that was set by default fixes this. Signed-off-by: Michel Marti <mma@objectxp.com> Acked-by: Boris Brezillon <boris.brezillon@free-electrons.com> Acked-by: Sylvain Rochet <sylvain.rochet@finsecur.com> [nicolas.ferre@atmel.com: rework the commit message] Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2015-03-04ARM: at91/dt: at91sam9260: fix usart pinctrlJonas Andersson1-2/+2
Corrected pins used by usart3. Signed-off-by: Jonas Andersson <jonas@microbit.se> Acked-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2015-01-15ARM: at91/dt: add SRAM nodesAlexandre Belloni1-0/+5
Add nodes for the SRAM available on atmel SoCs For the at91sam9260 and the at91sam9g20, address mirroring is used to create a single contiguous SRAM range instead of declaring two separate banks. Also remove leftover TODOs in the sam9g45 file Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Acked-by: Boris Brezillon <boris.brezillon@free-electrons.com> [nicolas.ferre@atmel.com: correct at91sam9rl sram size => 0x10000] Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2014-11-19ARM: at91/dt: add GPBR nodesBoris Brezillon1-0/+6
Add GPBR (General Purpose Block Backup Registers) nodes. Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2014-11-19ARM: at91/dt: add RTT nodes to at91 dtsisBoris Brezillon1-0/+8
at91sam926x, at91sam9g45 and at91sam9rl SoCs all have at least one RTT block. Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2014-07-09ARM: at91/dt: sam9260: define clocksAlexandre Belloni1-1/+313
Define the at91sam9260 clocks in the SoC dtsi file. Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2014-05-13ARM: at91/dt: sam9260: correct external trigger valueAlexandre Belloni1-1/+1
The external trigger value is 0b1101 which is 13 but 0xd. Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2014-03-12ARM: at91/dt: at91sam9260: remove useless adc propertiesAlexandre Belloni1-5/+6
Remove the properties that are not used anymore by the at91_adc driver. Also, add #address-cells, #size-cells and a reg for each trigger to comply to the ePAPR. Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2014-01-29ARM: at91/dt: add sam9 watchdog default options to SoCsBoris BREZILLON1-0/+5
Set default watchdog options in every SoC compatible with the sam9 watchdog. Signed-off-by: Boris BREZILLON <b.brezillon@overkiz.com> Acked-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2013-08-21ARM: at91: at91sam9260: add missing pinctrl-names on mmcJean-Christophe PLAGNIOL-VILLARD1-0/+1
pinctrl-names was missing causing mmc pinctrl to never be requested. Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Acked-by: Ludovic Desroches <ludovic.desroches@atmel.com> [nicolas.ferre@atmel.com: added a commit message taken from Ludovic] Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2013-06-08Merge branch 'dts-cpus-updates' of git://linux-arm.org/linux-2.6-lp into next/dtOlof Johansson1-2/+6
From Lorenzo Pieralisi, this is a series of patches that cleans up the CPU nodes in most of the SoC dtsi files to conform to the standard bindings. * 'dts-cpus-updates' of git://linux-arm.org/linux-2.6-lp: ARM: dts: sunxi: cpus/cpu nodes dts updates ARM: dts: spear: cpus/cpu nodes dts updates ARM: dts: sh7372: cpus/cpu nodes dts updates ARM: dts: r8a7740: cpus/cpu nodes dts updates ARM: dts: pxa2xx: cpus/cpu nodes dts updates ARM: dts: prima2: cpus/cpu node dts updates ARM: dts: picoxcell: cpus/cpu nodes dts updates ARM: dts: omap: cpus/cpu nodes dts updates ARM: dts: lpc32xx: cpus/cpu nodes dts updates ARM: dts: imx: cpus/cpu nodes dts updates ARM: dts: exynos5440: cpus/cpu nodes dts updates ARM: dts: at91: cpus/cpu node dts updates ARM: dts: armada-370-xp: cpus/cpu node dts updates ARM: dts: am33xx: cpus/cpu nodes dts updates Signed-off-by: Olof Johansson <olof@lixom.net>
2013-06-01Merge tag 'at91-dt' of git://github.com/at91linux/linux-at91 into next/dtOlof Johansson1-104/+197
From Nicolas Ferre: Big DT-centric update for AT91: - Calao boards update, removal of one board C file and associated defconfig, Kconfig Makefile lines - several Acme boards updates - addition of watchdog, uart and pinctrl descriptions for several products - modification of RTC compatible string for 9x5 family * tag 'at91-dt' of git://github.com/at91linux/linux-at91: (21 commits) ARM: at91/dt: add pinctrl definition for at91 tc blocks ARM: at91/dts: add the watchdog nodes for at91 boards ARM: at91/dtsi: add the watchdog nodes for at91 SoC ARM: at91: drop non DT: Calao USB-A96x ARM: at91: dt: add Calao USB-A9G20 low power version ARM: at91: dt: usb-a9263: add dataflash support ARM: at91: dt: usb-a9263: update shutdown controller ARM: at91: dt: usb-a9260: update shutdown controller ARM: at91: dt: sam9260: add i2c gpio pinctrl ARM: at91: switch Fox G20 board .dts to pre-processor defines ARM: at91: add Acme Systems Fox G20 board ARM: at91/at91-ariag25.dts: UART0/1 nodes are disabled ARM: at91/at91sam9x5.dtsi: add UART0/1 nodes ARM: at91/at91-ariag25.dts: add RTC node ARM: at91: at91sam9x5 RTC is not compatible with at91rm9200 one ARM: at91: udpate defconfigs ARM: at91: dt: switch to standard IRQ flag defines ARM: at91: dt: switch to pinctrl to pre-processor ARM: at91: dt: add pinctrl pre-processor define ARM: at91: dt: switch to standard GPIO flag defines. ... Signed-off-by: Olof Johansson <olof@lixom.net>
2013-06-01ARM: at91/dt: add pinctrl definition for at91 tc blocksBoris BREZILLON1-0/+76
This patch adds pinctrl configurations for at91 Timer Counter blocks. These pin definitions can be referenced by "atmel,tcb-pwm" devices to setup pins as PWM output for instance. Signed-off-by: Boris BREZILLON <b.brezillon@overkiz.com> [nicolas.ferre@atmel.com: switch to pinctrl pre-processor macros] Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2013-05-31ARM: at91: dt: sam9260: add i2c gpio pinctrlJean-Christophe PLAGNIOL-VILLARD1-0/+10
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2013-05-24ARM: at91/dt: fix macb pinctrl_macb_rmii_mii_alt definitionBoris BREZILLON1-1/+1
The PA24 pin is wrongly assigned to peripheral B. In the current config there is 2 ETX3 pins (PA11 and PA24) and no ETXER pin (PA22). Signed-off-by: Boris BREZILLON <b.brezillon@overkiz.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com> Cc: stable <stable@vger.kernel.org> # 3.8+
2013-05-23ARM: dts: at91: cpus/cpu node dts updatesLorenzo Pieralisi1-2/+6
This patch updates the in-kernel dts files according to the latest cpus and cpu bindings updates for ARM. Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2013-05-17ARM: at91: dt: switch to standard IRQ flag definesJean-Christophe PLAGNIOL-VILLARD1-22/+27
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
generated by cgit v1.2.3 (git 2.39.0) at 2024-11-05 08:39:17 +0300