summaryrefslogtreecommitdiff
path: root/Documentation/devicetree/bindings
AgeCommit message (Collapse)AuthorFilesLines
2020-02-02Merge tag 'leds-5.6-rc1' of ↵Linus Torvalds2-1/+54
git://git.kernel.org/pub/scm/linux/kernel/git/pavel/linux-leds Pull LED updates from Pavel Machek: - New driver for TI TPS6105X - Add managed API to get a LED from a device driver - Misc fixes and updates * tag 'leds-5.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/pavel/linux-leds: (22 commits) leds: lm3692x: Disable chip on brightness 0 leds: lm3692x: Split out lm3692x_leds_disable leds: lm3692x: Move lm3692x_init and rename to lm3692x_leds_enable leds: lm3692x: Make sure we don't exceed the maximum LED current dt: bindings: lm3692x: Add led-max-microamp property leds: lm3692x: Allow to configure over voltage protection dt: bindings: lm3692x: Add ti,ovp-microvolt property leds: populate the device's of_node leds: Add managed API to get a LED from a device driver leds: Add of_led_get() and led_put() leds: lm3532: add pointer to documentation and fix typo leds: lm3532: use extended registration so that LED can be used for backlight leds: lm3642: remove warnings for bad strtol, cleanup gotos leds: rb532: cleanup whitespace ledtrig-pattern: fix email address quoting in MODULE_AUTHOR() dt-bindings: mfd: update TI tps6105x chip bindings leds: tps6105x: add driver for MFD chip LED mode led: max77650: add of_match table leds: bd2802: Convert to use GPIO descriptors leds: pca963x: Fix open-drain initialization ...
2020-02-01Merge branch 'topic/user-access-begin' into nextMichael Ellerman2-4/+6
Merge the user_access_begin() series from Christophe. This is based on a commit from Linus that went into v5.5-rc7.
2020-02-01Merge tag 'pci-v5.6-changes' of ↵Linus Torvalds3-0/+254
git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci Pull PCI updates from Bjorn Helgaas: "Resource management: - Improve resource assignment for hot-added nested bridges, e.g., Thunderbolt (Nicholas Johnson) Power management: - Optionally print config space of devices before suspend (Chen Yu) - Increase D3 delay for AMD Ryzen5/7 XHCI controllers (Daniel Drake) Virtualization: - Generalize DMA alias quirks (James Sewart) - Add DMA alias quirk for PLX PEX NTB (James Sewart) - Fix IOV memory leak (Navid Emamdoost) AER: - Log which device prevents error recovery (Yicong Yang) Peer-to-peer DMA: - Whitelist Intel SkyLake-E (Armen Baloyan) Broadcom iProc host bridge driver: - Apply PAXC quirk whether driver is built-in or module (Wei Liu) Broadcom STB host bridge driver: - Add Broadcom STB PCIe host controller driver (Jim Quinlan) Intel Gateway SoC host bridge driver: - Add driver for Intel Gateway SoC (Dilip Kota) Intel VMD host bridge driver: - Add support for DMA aliases on other buses (Jon Derrick) - Remove dma_map_ops overrides (Jon Derrick) - Remove now-unused X86_DEV_DMA_OPS (Christoph Hellwig) NVIDIA Tegra host bridge driver: - Fix Tegra30 afi_pex2_ctrl register offset (Marcel Ziswiler) Panasonic UniPhier host bridge driver: - Remove module code since driver can't be built as a module (Masahiro Yamada) Qualcomm host bridge driver: - Add support for SDM845 PCIe controller (Bjorn Andersson) TI Keystone host bridge driver: - Fix "num-viewport" DT property error handling (Kishon Vijay Abraham I) - Fix link training retries initiation (Yurii Monakov) - Fix outbound region mapping (Yurii Monakov) Misc: - Add Switchtec Gen4 support (Kelvin Cao) - Add Switchtec Intercomm Notify and Upstream Error Containment support (Logan Gunthorpe) - Use dma_set_mask_and_coherent() since Switchtec supports 64-bit addressing (Wesley Sheng)" * tag 'pci-v5.6-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (60 commits) PCI: Allow adjust_bridge_window() to shrink resource if necessary PCI: Set resource size directly in adjust_bridge_window() PCI: Rename extend_bridge_window() to adjust_bridge_window() PCI: Rename extend_bridge_window() parameter PCI: Consider alignment of hot-added bridges when assigning resources PCI: Remove local variable usage in pci_bus_distribute_available_resources() PCI: Pass size + alignment to pci_bus_distribute_available_resources() PCI: Rename variables PCI: vmd: Add two VMD Device IDs PCI: Remove unnecessary braces PCI: brcmstb: Add MSI support PCI: brcmstb: Add Broadcom STB PCIe host controller driver x86/PCI: Remove X86_DEV_DMA_OPS PCI: vmd: Remove dma_map_ops overrides iommu/vt-d: Remove VMD child device sanity check iommu/vt-d: Use pci_real_dma_dev() for mapping PCI: Introduce pci_real_dma_dev() x86/PCI: Expose VMD's pci_dev in struct pci_sysdata x86/PCI: Add to_pci_sysdata() helper PCI/AER: Initialize aer_fifo ...
2020-02-01Merge tag 'media/v5.6-1' of ↵Linus Torvalds7-149/+359
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media Pull media updates from Mauro Carvalho Chehab: - New staging driver for Rockship ISPv1 unit - New staging driver for Rockchip MIPI Synopsys DPHY RX0 - y2038 fixes at V4L2 API (backward-compatible) - A dvb core fix when receiving invalid EIT sections - Some clang-specific warnings got fixed - Added support for touch V4L2 interface at vivid - Several drivers were converted to use the new i2c_new_scanned_device() kAPI - Added sm1 support at meson's vdec driver - Several other driver cleanups, fixes and improvements * tag 'media/v5.6-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (207 commits) media: staging/intel-ipu3: remove TODO item about acronyms media: v4l2-fwnode: Print the node name while parsing endpoints media: Revert "media: staging/intel-ipu3: make imgu use fixed running mode" media: mt9v111: constify copied structure media: platform: VIDEO_MEDIATEK_JPEG can also depend on MTK_IOMMU media: uvcvideo: Add a quirk to force GEO GC6500 Camera bits-per-pixel value media: uvcvideo: Avoid cyclic entity chains due to malformed USB descriptors media: hantro: fix post-processing NULL pointer dereference media: rcar-vin: Use correct pixel format when aligning format media: MAINTAINERS: add entry for Rockchip ISP1 driver media: staging: rkisp1: add TODO file for staging media: staging: rkisp1: add document for rkisp1 meta buffer format media: staging: rkisp1: add output device for parameters media: staging: rkisp1: add capture device for statistics media: staging: rkisp1: add user space ABI definitions media: staging: rkisp1: add streaming paths media: staging: rkisp1: add Rockchip ISP1 base driver media: staging: phy-rockchip-dphy-rx0: add Rockchip MIPI Synopsys DPHY RX0 driver media: staging: dt-bindings: add Rockchip MIPI RX D-PHY RX0 yaml bindings media: staging: dt-bindings: add Rockchip ISP1 yaml bindings ...
2020-02-01Merge branches 'clk-imx', 'clk-ti', 'clk-xilinx', 'clk-nvidia', 'clk-qcom', ↵Stephen Boyd16-112/+643
'clk-freescale' and 'clk-qoriq' into clk-next - Support for Xilinx Versal platform clks - Display clk controller on qcom sc7180 - Video clk controller on qcom sc7180 - Graphics clk controller on qcom sc7180 - CPU PLLs for qcom msm8916 - Fixes for clk controllers on qcom msm8998 SoCs - Move qcom msm8974 gfx3d clk to RPM control - Display port clk support on qcom sdm845 SoCs - Global clk controller on qcom ipq6018 - Adjust composite clk to new way of describing clk parents - Add a driver for BCLK of Freescale SAI cores * clk-imx: (32 commits) clk: imx: Add support for i.MX8MP clock driver dt-bindings: imx: Add clock binding doc for i.MX8MP clk: imx: gate4: Switch imx_clk_gate4_flags() to clk_hw based API clk: imx: imx8mq: Switch to clk_hw based API clk: imx: imx8mm: Switch to clk_hw based API clk: imx: imx8mn: Switch to clk_hw based API clk: imx: Remove __init for imx_obtain_fixed_clk_hw() API clk: imx: gate3: Switch to clk_hw based API clk: imx: add hw API imx_clk_hw_mux2_flags clk: imx: add imx_unregister_hw_clocks clk: imx: clk-composite-8m: Switch to clk_hw based API clk: imx: clk-pll14xx: Switch to clk_hw based API clk: imx7up: Rename the clks to hws clk: imx: Rename the imx_clk_divider_gate to imply it's clk_hw based clk: imx: Rename the imx_clk_pfdv2 to imply it's clk_hw based clk: imx: Rename the imx_clk_pllv4 to imply it's clk_hw based clk: imx: Rename sccg and frac pll register to suggest clk_hw clk: imx: imx7ulp composite: Rename to show is clk_hw based clk: imx: pllv2: Switch to clk_hw based API clk: imx: pllv1: Switch to clk_hw based API ... * clk-ti: clk: ti: clkctrl: Fix hidden dependency to node name clk: ti: add clkctrl data dra7 sgx clk: ti: omap5: Add missing AESS clock clk: ti: dra7: fix parent for gmac_clkctrl clk: ti: dra7: add vpe clkctrl data clk: ti: dra7: add cam clkctrl data dt-bindings: clock: Move ti-dra7-atl.h to dt-bindings/clock * clk-xilinx: clk: zynqmp: Add support for clock with CLK_DIVIDER_POWER_OF_TWO flag clk: zynqmp: Fix divider calculation clk: zynqmp: Add support for get max divider clk: zynqmp: Warn user if clock user are more than allowed clk: zynqmp: Extend driver for versal dt-bindings: clock: Add bindings for versal clock driver * clk-nvidia: clk: tegra20/30: Explicitly set parent clock for Video Decoder clk: tegra20/30: Don't pre-initialize displays parent clock clk: tegra: divider: Check UART's divider enable-bit state on rate's recalculation clk: tegra: clk-dfll: Remove call to pm_runtime_irq_safe() clk: tegra: Mark fuse clock as critical * clk-qcom: (35 commits) clk: qcom: rpmh: Sort OF match table dt-bindings: fix warnings in validation of qcom,gcc.yaml dt-binding: fix compilation error of the example in qcom,gcc.yaml clk: qcom: Add ipq6018 Global Clock Controller support clk: qcom: Add DT bindings for ipq6018 gcc clock controller clk: qcom: gcc-msm8996: Fix parent for CLKREF clocks clk: qcom: rpmh: Add IPA clock for SC7180 clk: qcom: rpmh: skip undefined clocks when registering clk: qcom: Add video clock controller driver for SC7180 dt-bindings: clock: Introduce SC7180 QCOM Video clock bindings dt-bindings: clock: Add YAML schemas for the QCOM VIDEOCC clock bindings clk: qcom: Add graphics clock controller driver for SC7180 dt-bindings: clock: Introduce SC7180 QCOM Graphics clock bindings dt-bindings: clock: Add YAML schemas for the QCOM GPUCC clock bindings clk: qcom: apcs-msm8916: use clk_parent_data to specify the parent clk: qcom: Add display clock controller driver for SC7180 dt-bindings: clock: Introduce QCOM sc7180 display clock bindings dt-bindings: clock: Add YAML schemas for the QCOM DISPCC clock bindings clk: qcom: clk-alpha-pll: Add support for Fabia PLL calibration clk: qcom: alpha-pll: Remove useless read from set rate ... * clk-freescale: clk: fsl-sai: new driver dt-bindings: clock: document the fsl-sai driver clk: composite: add _register_composite_pdata() variants * clk-qoriq: clk: qoriq: add ls1088a hwaccel clocks support clk: ls1028a: Add clock driver for Display output interface dt/bindings: clk: Add YAML schemas for LS1028A Display Clock bindings
2020-02-01Merge branches 'clk-debugfs-danger', 'clk-basic-hw', 'clk-renesas', ↵Stephen Boyd3-1/+56
'clk-amlogic' and 'clk-allwinner' into clk-next - Support dangerous debugfs actions on clks with dead code - Convert gpio, fixed-factor, mux, gate, divider basic clks to hw based APIs * clk-debugfs-danger: clk: Add support for setting clk_rate via debugfs * clk-basic-hw: clk: divider: Add support for specifying parents via DT/pointers clk: gate: Add support for specifying parents via DT/pointers clk: mux: Add support for specifying parents via DT/pointers clk: asm9260: Use parent accuracy in fixed rate clk clk: fixed-rate: Document that accuracy isn't a rate clk: fixed-rate: Add clk flags for parent accuracy clk: fixed-rate: Add support for specifying parents via DT/pointers clk: fixed-rate: Document accuracy member clk: fixed-rate: Move to_clk_fixed_rate() to C file clk: fixed-rate: Remove clk_register_fixed_rate_with_accuracy() clk: fixed-rate: Convert to clk_hw based APIs clk: gpio: Use DT way of specifying parents * clk-renesas: clk: renesas: Prepare for split of R-Car H3 config symbol dt-bindings: clock: renesas: cpg-mssr: Fix r8a774b1 typo clk: renesas: r7s9210: Add SPIBSC clock clk: renesas: rcar-gen3: Allow changing the RPC[D2] clocks clk: renesas: Remove use of ARCH_R8A7796 clk: renesas: rcar-gen2: Change multipliers and dividers to u8 * clk-amlogic: clk: clarify that clk_set_rate() does updates from top to bottom clk: meson: meson8b: make the CCF use the glitch-free mali mux clk: meson: pll: Fix by 0 division in __pll_params_to_rate() clk: meson: g12a: fix missing uart2 in regmap table clk: meson: meson8b: use of_clk_hw_register to register the clocks clk: meson: meson8b: don't register the XTAL clock when provided via OF clk: meson: meson8b: change references to the XTAL clock to use [fw_]name clk: meson: meson8b: use clk_hw_set_parent in the CPU clock notifier clk: meson: add a driver for the Meson8/8b/8m2 DDR clock controller dt-bindings: clock: meson8b: add the clock inputs dt-bindings: clock: add the Amlogic Meson8 DDR clock controller binding * clk-allwinner: clk: sunxi: a23/a33: Export the MIPI PLL clk: sunxi: a31: Export the MIPI PLL clk: sunxi-ng: a64: export CLK_CPUX clock for DVFS clk: sunxi-ng: add mux and pll notifiers for A64 CPU clock clk: sunxi-ng: r40: Export MBUS clock clk: sunxi: use of_device_get_match_data
2020-01-31Merge tag 'mips_5.6' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linuxLinus Torvalds2-0/+39
Pull MIPS changes from Paul Burton: "Nothing too big or scary in here: - Support mremap() for the VDSO, primarily to allow CRIU to restore the VDSO to its checkpointed location. - Restore the MIPS32 cBPF JIT, after having reverted the enablement of the eBPF JIT for MIPS32 systems in the 5.5 cycle. - Improve cop0 counter synchronization behaviour whilst onlining CPUs by running with interrupts disabled. - Better match FPU behaviour when emulating multiply-accumulate instructions on pre-r6 systems that implement IEEE754-2008 style MACs. - Loongson64 kernels now build using the MIPS64r2 ISA, allowing them to take advantage of instructions introduced by r2. - Support for the Ingenic X1000 SoC & the really nice little CU Neo development board that's using it. - Support for WMAC on GARDENA Smart Gateway devices. - Lots of cleanup & refactoring of SGI IP27 (Origin 2*) support in preparation for introducing IP35 (Origin 3*) support. - Various Kconfig & Makefile cleanups" * tag 'mips_5.6' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux: (60 commits) MIPS: PCI: Add detection of IOC3 on IO7, IO8, IO9 and Fuel MIPS: Loongson64: Disable exec hazard MIPS: Loongson64: Bump ISA level to MIPSR2 MIPS: Make DIEI support as a config option MIPS: OCTEON: octeon-irq: fix spelling mistake "to" -> "too" MIPS: asm: local: add barriers for Loongson MIPS: Loongson64: Select mac2008 only feature MIPS: Add MAC2008 Support Revert "MIPS: Add custom serial.h with BASE_BAUD override for generic kernel" MIPS: sort MIPS and MIPS_GENERIC Kconfig selects alphabetically (again) MIPS: make CPU_HAS_LOAD_STORE_LR opt-out MIPS: generic: don't unconditionally select PINCTRL MIPS: don't explicitly select LIBFDT in Kconfig MIPS: sync-r4k: do slave counter synchronization with disabled HW interrupts MIPS: SGI-IP30: Check for valid pointer before using it MIPS: syscalls: fix indentation of the 'SYSNR' message MIPS: boot: fix typo in 'vmlinux.lzma.its' target MIPS: fix indentation of the 'RELOCS' message dt-bindings: Document loongson vendor-prefix MIPS: CU1000-Neo: Refresh defconfig to support HWMON and WiFi. ...
2020-01-31dt/bindings: clk: Add YAML schemas for LS1028A Display Clock bindingsWen He1-0/+54
LS1028A has a clock domain PXLCLK0 used for provide pixel clocks to Display output interface. Add a YAML schema for this. Signed-off-by: Wen He <wen.he_1@nxp.com> Signed-off-by: Michael Walle <michael@walle.cc> Reviewed-by: Rob Herring <robh@kernel.org> Link: https://lkml.kernel.org/r/20191213083402.35678-1-wen.he_1@nxp.com Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2020-01-31Merge tag 'mtd/for-5.6' of ↵Linus Torvalds1-0/+7
git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux Pull MTD updates from Miquel Raynal: "MTD core - block2mtd: page index should use pgoff_t - maps: physmap: minimal Runtime PM support - maps: pcmciamtd: avoid possible sleep-in-atomic-context bugs - concat: Fix a comment referring to an unknown symbol Raw NAND: - Macronix: Use match_string() helper - Atmel: switch to using devm_fwnode_gpiod_get() - Denali: rework the SKIP_BYTES feature and add reset controlling - Brcmnand: set appropriate DMA mask - Cadence: add unspecified HAS_IOMEM dependency - Various cleanup. Onenand: - Rename Samsung and Omap2 drivers to avoid possible build warnings - Enable compile testing - Various build issues - Kconfig cleanup SPI-NAND: - Support for Toshiba TC58CVG2S0HRAIJ SPI-NOR: - Add support for TB selection using SR bit 6, - Add support for few flashes" * tag 'mtd/for-5.6' of git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux: (41 commits) mtd: concat: Fix a comment referring to an unknown symbol mtd: rawnand: add unspecified HAS_IOMEM dependency mtd: block2mtd: page index should use pgoff_t mtd: maps: physmap: Add minimal Runtime PM support mtd: maps: pcmciamtd: fix possible sleep-in-atomic-context bugs in pcmciamtd_set_vpp() mtd: onenand: Rename omap2 driver to avoid a build warning mtd: onenand: Use a better name for samsung driver mtd: rawnand: atmel: switch to using devm_fwnode_gpiod_get() mtd: spinand: add support for Toshiba TC58CVG2S0HRAIJ mtd: rawnand: macronix: Use match_string() helper to simplify the code mtd: sharpslpart: Fix unsigned comparison to zero mtd: onenand: Enable compile testing of OMAP and Samsung drivers mtd: onenand: samsung: Fix printing format for size_t on 64-bit mtd: onenand: samsung: Fix pointer cast -Wpointer-to-int-cast warnings on 64 bit mtd: rawnand: denali: remove hard-coded DENALI_DEFAULT_OOB_SKIP_BYTES mtd: rawnand: denali_dt: add reset controlling dt-bindings: mtd: denali_dt: document reset property mtd: rawnand: denali_dt: Add support for configuring SPARE_AREA_SKIP_BYTES mtd: rawnand: denali_dt: error out if platform has no associated data mtd: rawnand: brcmnand: Set appropriate DMA mask ...
2020-01-30Merge tag 'drm-next-2020-01-30' of git://anongit.freedesktop.org/drm/drmLinus Torvalds38-917/+3248
Pull drm updates from Davbe Airlie: "This is the main pull request for graphics for 5.6. Usual selection of changes all over. I've got one outstanding vmwgfx pull that touches mm so kept it separate until after all of this lands. I'll try and get it to you soon after this, but it might be early next week (nothing wrong with code, just my schedule is messy) This also hits a lot of fbdev drivers with some cleanups. Other notables: - vulkan timeline semaphore support added to syncobjs - nouveau turing secureboot/graphics support - Displayport MST display stream compression support Detailed summary: uapi: - dma-buf heaps added (and fixed) - command line add support for panel oreientation - command line allow overriding penguin count drm: - mipi dsi definition updates - lockdep annotations for dma_resv - remove dma-buf kmap/kunmap support - constify fb_ops in all fbdev drivers - MST fix for daisy chained hotplug- - CTA-861-G modes with VIC >= 193 added - fix drm_panel_of_backlight export - LVDS decoder support - more device based logging support - scanline alighment for dumb buffers - MST DSC helpers scheduler: - documentation fixes - job distribution improvements panel: - Logic PD type 28 panel support - Jimax8729d MIPI-DSI - igenic JZ4770 - generic DSI devicetree bindings - sony acx424AKP panel - Leadtek LTK500HD1829 - xinpeng XPP055C272 - AUO B116XAK01 - GiantPlus GPM940B0 - BOE NV140FHM-N49 - Satoz SAT050AT40H12R2 - Sharp LS020B1DD01D panels. ttm: - use blocking WW lock i915: - hw/uapi state separation - Lock annotation improvements - selftest improvements - ICL/TGL DSI VDSC support - VBT parsing improvments - Display refactoring - DSI updates + fixes - HDCP 2.2 for CFL - CML PCI ID fixes - GLK+ fbc fix - PSR fixes - GEN/GT refactor improvments - DP MST fixes - switch context id alloc to xarray - workaround updates - LMEM debugfs support - tiled monitor fixes - ICL+ clock gating programming removed - DP MST disable sequence fixed - LMEM discontiguous object maps - prefaulting for discontiguous objects - use LMEM for dumb buffers if possible - add LMEM mmap support amdgpu: - enable sync object timelines for vulkan - MST atomic routines - enable MST DSC support - add DMCUB display microengine support - DC OEM i2c support - Renoir DC fixes - Initial HDCP 2.x support - BACO support for Arcturus - Use BACO for runtime PM power save - gfxoff on navi10 - gfx10 golden updates and fixes - DCN support on POWER - GFXOFF for raven1 refresh - MM engine idle handlers cleanup - 10bpc EDP panel fixes - renoir watermark fixes - SR-IOV fixes - Arcturus VCN fixes - GDDR6 training fixes - freesync fixes - Pollock support amdkfd: - unify more codepath with amdgpu - use KIQ to setup HIQ rather than MMIO radeon: - fix vma fault handler race - PPC DMA fix - register check fixes for r100/r200 nouveau: - mmap_sem vs dma_resv fix - rewrite the ACR secure boot code for Turing - TU10x graphics engine support (TU11x pending) - Page kind mapping for turing - 10-bit LUT support - GP10B Tegra fixes - HD audio regression fix hisilicon/hibmc: - use generic fbdev code and helpers rockchip: - dsi/px30 support virtio: - fb damage support - static some functions vc4: - use dma_resv lock wrappers msm: - use dma_resv lock wrappers - sc7180 display + DSI support - a618 support - UBWC support improvements vmwgfx: - updates + new logging uapi exynos: - enable/disable callback cleanups etnaviv: - use dma_resv lock wrappers atmel-hlcdc: - clock fixes mediatek: - cmdq support - non-smooth cursor fixes - ctm property support sun4i: - suspend support - A64 mipi dsi support rcar-du: - Color management module support - LVDS encoder dual-link support - R8A77980 support analogic: - add support for an6345 ast: - atomic modeset support - primary plane garbage fix arcgpu: - fixes for fourcc handling tegra: - minor fixes and improvments mcde: - vblank support meson: - OSD1 plane AFBC commit gma500: - add pageflip support - reomve global drm_dev komeda: - tweak debugfs output - d32 support - runtime PM suppotr udl: - use generic shmem helpers - cleanup and fixes" * tag 'drm-next-2020-01-30' of git://anongit.freedesktop.org/drm/drm: (1998 commits) drm/nouveau/fb/gp102-: allow module to load even when scrubber binary is missing drm/nouveau/acr: return error when registering LSF if ACR not supported drm/nouveau/disp/gv100-: not all channel types support reporting error codes drm/nouveau/disp/nv50-: prevent oops when no channel method map provided drm/nouveau: support synchronous pushbuf submission drm/nouveau: signal pending fences when channel has been killed drm/nouveau: reject attempts to submit to dead channels drm/nouveau: zero vma pointer even if we only unreference it rather than free drm/nouveau: Add HD-audio component notifier support drm/nouveau: fix build error without CONFIG_IOMMU_API drm/nouveau/kms/nv04: remove set but not used variable 'width' drm/nouveau/kms/nv50: remove set but not unused variable 'nv_connector' drm/nouveau/mmu: fix comptag memory leak drm/nouveau/gr/gp10b: Use gp100_grctx and gp100_gr_zbc drm/nouveau/pmu/gm20b,gp10b: Fix Falcon bootstrapping drm/exynos: Rename Exynos to lowercase drm/exynos: change callback names drm/mst: Don't do atomic checks over disabled managers drm/amdgpu: add the lost mutex_init back drm/amd/display: skip opp blank or unblank if test pattern enabled ...
2020-01-30Merge tag 'for-v5.6' of ↵Linus Torvalds5-3/+51
git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply Pull power supply and reset updates from Sebastian Reichel: "Core: - Add battery internal resistance temperature table support Drivers: - sc27xx: Optimize the battery resistance with measuring temperature - max17042-battery: Add MAX17055 support - bq25890-charger: Add support of BQ25892 and BQ25896 chips - misc fixes" * tag 'for-v5.6' of git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply: (44 commits) power: supply: ipaq_micro_battery: remove unneeded semicolon power: supply: bq25890_charger: fix incorrect error return when bq25890_field_read fails power: supply: axp20x_usb_power: Only poll while offline power: supply: axp20x_usb_power: Add wakeup control power: supply: axp20x_usb_power: Allow offlining power: supply: axp20x_usb_power: Use a match structure power: suppy: ucs1002: Make the symbol 'ucs1002_regulator_enable' static power: reset: at91-poweroff: use proper master clock register offset power: reset: at91-poweroff: introduce struct shdwc_reg_config power: supply: bq25890_charger: Add DT and I2C ids for all supported chips dt-bindings: Add new chips to bq25890 binding documentation power: supply: bq25890_charger: Add support of BQ25892 and BQ25896 chips power: supply: core: Update sysfs-class-power ABI document power: supply: sbs-battery: Fix a signedness bug in sbs_get_battery_capacity() power: supply: ltc2941-battery-gauge: fix use-after-free power: supply: max17040: Correct IRQ wake handling power: supply: axp20x_usb_power: Remove unused device_node power: supply: axp20x_ac_power: Add wakeup control power: supply: axp20x_ac_power: Allow offlining power: supply: axp20x_ac_power: Fix reporting online status ...
2020-01-30Merge tag 'devicetree-for-5.6' of ↵Linus Torvalds135-3164/+7494
git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux Pull devicetree updates from Rob Herring: - Update dtc to upstream v1.5.1-22-gc40aeb60b47a (plus 1 revert) - Fix for DMA coherent devices on Power - Rework and simplify the DT phandle cache code - DT schema conversions for LEDS, gpio-leds, STM32 dfsdm, STM32 UART, STM32 ROMEM, STM32 watchdog, STM32 DMAs, STM32 mlahb, STM32 RTC, STM32 RCC, STM32 syscon, rs485, Renesas rCar CSI2, Faraday FTIDE010, DWC2, Arm idle-states, Allwinner legacy resets, PRCM and clocks, Allwinner H6 OPP, Allwinner AHCI, Allwinner MBUS, Allwinner A31 CSI, Allwinner h/w codec, Allwinner A10 system ctrl, Allwinner SRAM, Allwinner USB PHY, Renesas CEU, generic PCI host, Arm Versatile PCI - New binding schemas for SATA and PATA controllers, TI and Infineon VR controllers, MAX31730 - New compatible strings for i.MX8QM, WCN3991, renesas,r8a77961-wdt, renesas,etheravb-r8a77961 - Add USB 'super-speed-plus' as a documented speed - Vendor prefixes for broadmobi, calaosystems, kam, and mps - Clean-up the multiple flavors of ST-Ericsson vendor prefixes * tag 'devicetree-for-5.6' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (66 commits) scripts/dtc: Revert "yamltree: Ensure consistent bracketing of properties with phandles" of: Add OF_DMA_DEFAULT_COHERENT & select it on powerpc dt-bindings: leds: Convert gpio-leds to DT schema dt-bindings: leds: Convert common LED binding to schema dt-bindings: PCI: Convert generic host binding to DT schema dt-bindings: PCI: Convert Arm Versatile binding to DT schema dt-bindings: Be explicit about installing deps dt-bindings: stm32: convert dfsdm to json-schema dt-bindings: serial: Convert STM32 UART to json-schema dt-bindings: serial: Convert rs485 bindings to json-schema dt-bindings: timer: Use non-empty ranges in example dt-bindings: arm-boards: typo fix dt-bindings: Add TI and Infineon VR Controllers as trivial devices dt-binding: usb: add "super-speed-plus" dt-bindings: rcar-csi2: Convert bindings to json-schema dt-bindings: iio: adc: ad7606: Fix wrong maxItems value dt-bindings: Convert Faraday FTIDE010 to DT schema dt-bindings: Create DT bindings for PATA controllers dt-bindings: Create DT bindings for SATA controllers dt: bindings: add vendor prefix for Kamstrup A/S ...
2020-01-30Merge branch 'remotes/lorenzo/pci/qcom'Bjorn Helgaas1-0/+19
- Add DT clock/reset info for SDM845 PCIe controller (Bjorn Andersson) - Add support for SDM845 PCIe controller to the qcom driver (Bjorn Andersson) * remotes/lorenzo/pci/qcom: PCI: qcom: Add support for SDM845 PCIe controller dt-bindings: PCI: qcom: Add support for SDM845 PCIe
2020-01-30Merge branch 'remotes/lorenzo/pci/dwc'Bjorn Helgaas1-0/+138
- Add intel-gw driver for PCIe host controller on Intel Gateway SoC (Dilip Kota) - Use shared DesignWare helpers to configure Fast Training Sequence (FTS) in artpec6 (Dilip Kota) * remotes/lorenzo/pci/dwc: PCI: artpec6: Configure FTS with dwc helper function PCI: dwc: intel: PCIe RC controller driver dt-bindings: PCI: intel: Add YAML schemas for the PCIe RC controller
2020-01-29Merge branch 'i2c-mux/for-next' of https://github.com/peda-r/i2c-mux into ↵Wolfram Sang1-0/+2
i2c/for-5.6 The main feature is the idle-state rework of the pca954x driver from Biwen Li.
2020-01-29Merge tag 'at24-updates-for-v5.6' of ↵Wolfram Sang3-4/+18
git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux into i2c/for-5.6 at24 updates for linux v5.6 - minor maintenance: update the license tag, sort headers - move support for the write-protect pin into nvmem core - add a reference to the new wp-gpios property in nvmem to at25 bindings - add support for regulator and pm_runtime control
2020-01-29Merge tag 'char-misc-5.6-rc1' of ↵Linus Torvalds6-1/+342
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc Pull char/misc driver updates from Greg KH: "Here is the big char/misc/whatever driver changes for 5.6-rc1 Included in here are loads of things from a variety of different driver subsystems: - soundwire updates - binder updates - nvmem updates - firmware drivers updates - extcon driver updates - various misc driver updates - fpga driver updates - interconnect subsystem and driver updates - bus driver updates - uio driver updates - mei driver updates - w1 driver cleanups - various other small driver updates All of these have been in linux-next for a while with no reported issues" * tag 'char-misc-5.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (86 commits) mei: me: add jasper point DID char: hpet: Use flexible-array member binder: fix log spam for existing debugfs file creation. mei: me: add comet point (lake) H device ids nvmem: add QTI SDAM driver dt-bindings: nvmem: add binding for QTI SPMI SDAM dt-bindings: imx-ocotp: Add i.MX8MP compatible dt-bindings: soundwire: fix example soundwire: cadence: fix kernel-doc parameter descriptions soundwire: intel: report slave_ids for each link to SOF driver siox: Use the correct style for SPDX License Identifier w1: omap-hdq: Simplify driver with PM runtime autosuspend firmware: stratix10-svc: Remove unneeded semicolon firmware: google: Probe for a GSMI handler in firmware firmware: google: Unregister driver_info on failure and exit in gsmi firmware: google: Release devices before unregistering the bus slimbus: qcom: add missed clk_disable_unprepare in remove slimbus: Use the correct style for SPDX License Identifier slimbus: qcom-ngd-ctrl: Use dma_request_chan() instead dma_request_slave_channel() dt-bindings: SLIMBus: add slim devices optional properties ...
2020-01-29Merge tag 'staging-5.6-rc1' of ↵Linus Torvalds13-17/+365
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging Pull staging and IIO updates from Greg KH: "Here is the big staging/iio driver patches for 5.6-rc1 Included in here are: - lots of new IIO drivers and updates for that subsystem - the usual huge quantity of minor cleanups for staging drivers - removal of the following staging drivers: - isdn/avm - isdn/gigaset - isdn/hysdn - octeon-usb - octeon ethernet Overall we deleted far more lines than we added, removing over 40k of old and obsolete driver code. All of these changes have been in linux-next for a while with no reported issues" * tag 'staging-5.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: (353 commits) staging: most: usb: check for NULL device staging: next: configfs: fix release link staging: most: core: fix logging messages staging: most: core: remove container struct staging: most: remove struct device core driver staging: most: core: drop device reference staging: most: remove device from interface structure staging: comedi: drivers: fix spelling mistake "to" -> "too" staging: exfat: remove fs_func struct. staging: wilc1000: avoid mutex unlock without lock in wilc_wlan_handle_txq() staging: wilc1000: return zero on success and non-zero on function failure staging: axis-fifo: replace spinlock with mutex staging: wilc1000: remove unused code prior to throughput enhancement in SPI staging: wilc1000: added 'wilc_' prefix for 'struct assoc_resp' name staging: wilc1000: move firmware API struct's to separate header file staging: wilc1000: remove use of infinite loop conditions staging: kpc2000: rename variables with kpc namespace staging: vt6656: Remove memory buffer from vnt_download_firmware. staging: vt6656: Just check NEWRSR_DECRYPTOK for RX_FLAG_DECRYPTED. staging: vt6656: Use vnt_rx_tail struct for tail variables. ...
2020-01-29Merge tag 'usb-5.6-rc1' of ↵Linus Torvalds11-62/+540
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb Pull USB/Thunderbolt/PHY driver updates from Greg KH: "Here is the big USB and Thunderbolt and PHY driver updates for 5.6-rc1. With the advent of USB4, "Thunderbolt" has really become USB4, so the renaming of the Kconfig option and starting to share subsystem code has begun, hence both subsystems coming in through the same tree here. PHY driver updates also touched USB drivers, so that is coming in through here as well. Major stuff included in here are: - USB 4 initial support added (i.e. Thunderbolt) - musb driver updates - USB gadget driver updates - PHY driver updates - USB PHY driver updates - lots of USB serial stuff fixed up - USB typec updates - USB-IP fixes - lots of other smaller USB driver updates All of these have been in linux-next for a while now (the usb-serial tree is already tested in linux-next on its own before merged into here), with no reported issues" [ Removed an incorrect compile test enablement for PHY_EXYNOS5250_SATA that causes configuration warnings - Linus ] * tag 'usb-5.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (207 commits) Doc: ABI: add usb charger uevent usb: phy: show USB charger type for user usb: cdns3: fix spelling mistake and rework grammar in text usb: phy: phy-gpio-vbus-usb: Convert to GPIO descriptors USB: serial: cyberjack: fix spelling mistake "To" -> "Too" USB: serial: ir-usb: simplify endpoint check USB: serial: ir-usb: make set_termios synchronous USB: serial: ir-usb: fix IrLAP framing USB: serial: ir-usb: fix link-speed handling USB: serial: ir-usb: add missing endpoint sanity check usb: typec: fusb302: fix "op-sink-microwatt" default that was in mW usb: typec: wcove: fix "op-sink-microwatt" default that was in mW usb: dwc3: pci: add ID for the Intel Comet Lake -V variant usb: typec: tcpci: mask event interrupts when remove driver usb: host: xhci-tegra: set MODULE_FIRMWARE for tegra186 usb: chipidea: add inline for ci_hdrc_host_driver_init if host is not defined usb: chipidea: handle single role for usb role class usb: musb: fix spelling mistake: "periperal" -> "peripheral" phy: ti: j721e-wiz: Fix build error without CONFIG_OF_ADDRESS USB: usbfs: Always unlink URBs in reverse order ...
2020-01-29Merge tag 'pinctrl-v5.6-1' of ↵Linus Torvalds7-126/+158
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl Pull pin control updates from Linus Walleij: "This is the bulk of pin control changes, nothing too exciting about this. Some changes hit arch/sh and arch/arm but are well isolated and acknowledged by the respective arch maintainers. Core changes: - Dropped the chained IRQ setup callback into GPIOLIB as we got rid of the last users of that in this changeset. New drivers: - New driver for Ingenic X1830. - New driver for Freescale i.MX8MP. Driver enhancements: - Fix all remaining Intel drivers to pass their IRQ chips along with the GPIO chips. - Intel Baytrail allocates its irqchip dynamically. - Intel Lynxpoint is thoroughly rewritten and modernized. - Aspeed AST2600 pin muxing and configuration is much improved. - Qualcomm SC7180 functions are updated and wakeup interrupt map is provided. - A whole slew of Renesas SH-PFC cleanups and improvements. - Fix up the Intel DT bindings to use the generic YAML DT bindings schema (a first user of this)" * tag 'pinctrl-v5.6-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (99 commits) pinctrl: madera: Remove extra blank line pinctrl: qcom: Don't lock around irq_set_irq_wake() pinctrl: mvebu: armada-37xx: use use platform api gpio: Drop the chained IRQ handler assign function pinctrl: freescale: Add i.MX8MP pinctrl driver support dt-bindings: imx: Add pinctrl binding doc for i.MX8MP pinctrl: tigerlake: Tiger Lake uses _HID enumeration pinctrl: sunrisepoint: Add Coffee Lake-S ACPI ID pinctrl: iproc: Use platform_get_irq_optional() to avoid error message pinctrl: dt-bindings: Fix some errors in the lgm and pinmux schema pinctrl: intel: Pass irqchip when adding gpiochip pinctrl: intel: Add GPIO <-> pin mapping ranges via callback pinctrl: baytrail: Replace WARN with dev_info_once when setting direct-irq pin to output pinctrl: baytrail: Do not clear IRQ flags on direct-irq enabled pins pinctrl: sunrisepoint: Add missing Interrupt Status register offset pinctrl: sh-pfc: Split R-Car H3 support in two independent drivers pinctrl: artpec6: fix __iomem on reg in set pinctrl: ingenic: Use devm_platform_ioremap_resource() pinctrl: ingenic: Factorize irq_set_type function pinctrl: ingenic: Remove duplicated ingenic_chip_info structures ...
2020-01-29regulator: qcom_spmi: Fix docs for PM8004Petr Vorel1-1/+1
Fixes: 2e36e140b8b8 ("regulator: qcom_spmi: Add support for PM8004 regulators") Signed-off-by: Petr Vorel <petr.vorel@gmail.com> Link: https://lore.kernel.org/r/20200127231439.3562452-1-petr.vorel@gmail.com Signed-off-by: Mark Brown <broonie@kernel.org>
2020-01-29Merge tag 'gpio-v5.6-1' of ↵Linus Torvalds5-1/+170
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio Pull GPIO updates from Linus Walleij: "This is the bulk of GPIO changes for the v5.6 kernel cycle. This is a pretty calm cycle so far, nothing special going on really. Some more changes will come in from the irqchip and pin control trees. I also deleted an orphan include file for FMC that was dangling since subsystem was removed. Core changes: - Document the usecases for the kernelspace vs userspace handling of GPIOs. - Handle MSI (message signalled interrupts) properly in the core hierarchical irqdomain code. - Fix a rare race condition while initializing the descriptor array. New drivers: - Xylon LogiCVC GPIO driver. - WDC934x GPIO controller driver. Driver improvements: - Implemented suspend/resume in the Tegra driver. - MPC8xx edge detection fixup. - Properly convert ThunderX to use hierarchical irqdomain with GPIOLIB_IRQCHIP on top of the revert of the previous buggy switchover. This time it works (hopefully). Misc: - Drop a FMC remnant file <linux/ipmi-fru.h> - A slew of fixes" * tag 'gpio-v5.6-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio: (48 commits) MAINTAINERS: Replace Tien Hock Loh as Altera PIO maintainer gpiolib: hold gpio devices lock until ->descs array is initialised gpio: aspeed-sgpio: fixed typos gpio: mvebu: clear irq in edge cause register before unmask edge irq gpiolib: Lower verbosity when allocating hierarchy irq gpiolib: Remove duplicated function gpio_do_set_config() gpio: Fix the no return statement warning gpio: wcd934x: Add support to wcd934x gpio controller gpiolib: remove set but not used variable 'config' gpio: vx855: fixed a typo gpio: mockup: sort headers alphabetically gpio: mockup: update the license tag gpio: Remove the unused flags gpiolib: Set lockdep class for hierarchical irq domains gpio: thunderx: Switch to GPIOLIB_IRQCHIP gpiolib: Add the support for the msi parent domain gpiolib: Add support for the irqdomain which doesn't use irq_fwspec as arg gpio: Add use guidance documentation dt-bindings: gpio: wcd934x: Add bindings for gpio gpio: altera: change to platform_get_irq_optional to avoid false-positive error ...
2020-01-29Merge tag 'thermal-v5.6-rc1' of ↵Linus Torvalds3-2/+214
git://git.kernel.org/pub/scm/linux/kernel/git/thermal/linux Pull thermal updates from Daniel Lezcano: - Depromote debug print on the db8500 platform (Linus Walleij) - Fix compilation warning when compiling with make W=1 (Amit Kucheria) - Code cleanup and refactoring, regmap conversion and add hwmon support on Qoriq (Andrey Smirnov) - Add an idle injection cpu cooling device and its documentation, rename the cpu_cooling device to cpufreq_cooling device (Daniel Lezcano) - Convert unexported functions to static, add the __init annotation in the thermal-of code and remove the pointless wrapper functions (Daniel Lezcano) - Fix register offset for Armada XP and register reset bit initialization (Zak Hays) - Enable hwmon on the rockchip (Stefan Schaeckeler) - Add the thermal sensor for the H6/H5/H3/A64/A83T/R40 sun8i platform and their device tree bindings, followed by a fix for the ths number and the sparse warnings (Yangtao Li) - Code cleansup for the sun8i and hwmon support (Yangtao Li) - Silent some messages which are misleading given the changes made in the previous version on generic-adc (Martin Blumenstingl) - Rename exynos to Exynos (Krzysztof Kozlowski) - Add the bcm2711 thermal driver with the device tree bindings (Stefan Wahren) - Use usleep_range() instead of udelay() as the call is always done in a sleep-able context (Geert Uytterhoeven) - Do code cleanup and re-organization to set the scene for a new process for the brcmstb (Florian Fainelli) - Fix bindings check issues on brcm (Stefan Wahren) - Add Jasper Lake support on int340x (Nivedita Swaminathan) - Add Comet Lake support on intel pch (Gayatri Kammela) - Fix unmatched pci_release_region() on x86 (Chuhong Yuan) - Remove temperature boundaries for rcar and rcar3 (Niklas Söderlund) - Fix return value to -ENODEV when thermal_zone_of_sensor_register() is called with the of-node is missing (Peter Mamonov) - Code cleanup, interrupt bouncing, and better support on stm32 (Pascal Paillet) * tag 'thermal-v5.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/thermal/linux: (66 commits) thermal: stm32: Fix low threshold interrupt flood thermal: stm32: Improve temperature computing thermal: stm32: Handle multiple trip points thermal: stm32: Disable interrupts at probe thermal: stm32: Rework sensor mode management thermal: stm32: Fix icifr register name thermal: of: Make thermal_zone_of_sensor_register return -ENODEV if a sensor OF node is missing thermal: rcar_gen3_thermal: Remove temperature bound thermal: rcar_thermal: Remove temperature bound thermal: intel: intel_pch_thermal: Add Comet Lake (CML) platform support thermal: intel: Fix unmatched pci_release_region thermal: int340x: processor_thermal: Add Jasper Lake support dt-bindings: brcm,avs-ro-thermal: Fix binding check issues thermal: brcmstb_thermal: Register different ops per process thermal: brcmstb_thermal: Restructure interrupt registration thermal: brcmstb_thermal: Add 16nm process thermal parameters dt-bindings: thermal: Define BCM7216 thermal sensor compatible thermal: brcmstb_thermal: Prepare to support a different process thermal: brcmstb_thermal: Do not use DT coefficients thermal: rcar_thermal: Use usleep_range() instead of udelay() ...
2020-01-29Merge tag 'sound-5.6-rc1' of ↵Linus Torvalds11-44/+346
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound Pull sound updates from Takashi Iwai: "As the diffstat shows we've had again a lot of works done for this cycle: the majority of changes are the continued componentization and code refactoring in ASoC, the tree-wide PCM API updates and cleanups and SOF updates while a few ASoC driver updates are seen, too. Here we go, some highlights: Core: - Finally y2038 support landed to ALSA ABI; some ioctls have been extended and lots of tricks were applied - Applying the new managed PCM buffer API to all drivers; the API itself was already merged in 5.5 - The already deprecated dimension support in ALSA control API is dropped completely now - Verification of ALSA control elements to catch API misuses ASoC: - Further code refactorings and moving things to the component level - Lots of updates and improvements on SOF / Intel drivers; now including common HDMI driver and SoundWire support - New driver support for Ingenic JZ4770, Mediatek MT6660, Qualcomm WCD934x and WSA881x, and Realtek RT700, RT711, RT715, RT1011, RT1015 and RT1308 HD-audio: - Improved ring-buffer communications using waitqueue - Drop the superfluous buffer preallocation on x86 Others: - Many code cleanups, mostly constifications over the whole tree - USB-audio: quirks for MOTU, Corsair Virtuoso, Line6 Helix - FireWire: code refactoring for oxfw and dice drivers" * tag 'sound-5.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (638 commits) ALSA: usb-audio: add quirks for Line6 Helix devices fw>=2.82 ALSA: hda: Add Clevo W65_67SB the power_save blacklist ASoC: soc-core: remove null_snd_soc_ops ASoC: soc-pcm: add soc_rtd_trigger() ASoC: soc-pcm: add soc_rtd_hw_free() ASoC: soc-pcm: add soc_rtd_hw_params() ASoC: soc-pcm: add soc_rtd_prepare() ASoC: soc-pcm: add soc_rtd_shutdown() ASoC: soc-pcm: add soc_rtd_startup() ASoC: rt1015: add rt1015 amplifier driver ASoC: madera: Correct some kernel doc ASoC: topology: fix soc_tplg_fe_link_create() - link->dobj initialization order ASoC: Intel: skl_hda_dsp_common: Fix global-out-of-bounds bug ASoC: madera: Correct DMIC only input hook ups ALSA: cs46xx: fix spelling mistake "to" -> "too" ALSA: hda - Add docking station support for Lenovo Thinkpad T420s ASoC: Add MediaTek MT6660 Speaker Amp Driver ASoC: dt-bindings: rt5645: add suppliers ASoC: max98090: fix deadlock in max98090_dapm_put_enum_double() ASoC: dapm: add snd_soc_dapm_put_enum_double_locked ...
2020-01-29Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextLinus Torvalds8-16/+548
Pull networking updates from David Miller: 1) Add WireGuard 2) Add HE and TWT support to ath11k driver, from John Crispin. 3) Add ESP in TCP encapsulation support, from Sabrina Dubroca. 4) Add variable window congestion control to TIPC, from Jon Maloy. 5) Add BCM84881 PHY driver, from Russell King. 6) Start adding netlink support for ethtool operations, from Michal Kubecek. 7) Add XDP drop and TX action support to ena driver, from Sameeh Jubran. 8) Add new ipv4 route notifications so that mlxsw driver does not have to handle identical routes itself. From Ido Schimmel. 9) Add BPF dynamic program extensions, from Alexei Starovoitov. 10) Support RX and TX timestamping in igc, from Vinicius Costa Gomes. 11) Add support for macsec HW offloading, from Antoine Tenart. 12) Add initial support for MPTCP protocol, from Christoph Paasch, Matthieu Baerts, Florian Westphal, Peter Krystad, and many others. 13) Add Octeontx2 PF support, from Sunil Goutham, Geetha sowjanya, Linu Cherian, and others. * git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1469 commits) net: phy: add default ARCH_BCM_IPROC for MDIO_BCM_IPROC udp: segment looped gso packets correctly netem: change mailing list qed: FW 8.42.2.0 debug features qed: rt init valid initialization changed qed: Debug feature: ilt and mdump qed: FW 8.42.2.0 Add fw overlay feature qed: FW 8.42.2.0 HSI changes qed: FW 8.42.2.0 iscsi/fcoe changes qed: Add abstraction for different hsi values per chip qed: FW 8.42.2.0 Additional ll2 type qed: Use dmae to write to widebus registers in fw_funcs qed: FW 8.42.2.0 Parser offsets modified qed: FW 8.42.2.0 Queue Manager changes qed: FW 8.42.2.0 Expose new registers and change windows qed: FW 8.42.2.0 Internal ram offsets modifications MAINTAINERS: Add entry for Marvell OcteonTX2 Physical Function driver Documentation: net: octeontx2: Add RVU HW and drivers overview octeontx2-pf: ethtool RSS config support octeontx2-pf: Add basic ethtool support ...
2020-01-29Merge branch 'linus' of ↵Linus Torvalds1-0/+1
git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6 Pull crypto updates from Herbert Xu: "API: - Removed CRYPTO_TFM_RES flags - Extended spawn grabbing to all algorithm types - Moved hash descsize verification into API code Algorithms: - Fixed recursive pcrypt dead-lock - Added new 32 and 64-bit generic versions of poly1305 - Added cryptogams implementation of x86/poly1305 Drivers: - Added support for i.MX8M Mini in caam - Added support for i.MX8M Nano in caam - Added support for i.MX8M Plus in caam - Added support for A33 variant of SS in sun4i-ss - Added TEE support for Raven Ridge in ccp - Added in-kernel API to submit TEE commands in ccp - Added AMD-TEE driver - Added support for BCM2711 in iproc-rng200 - Added support for AES256-GCM based ciphers for chtls - Added aead support on SEC2 in hisilicon" * 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (244 commits) crypto: arm/chacha - fix build failured when kernel mode NEON is disabled crypto: caam - add support for i.MX8M Plus crypto: x86/poly1305 - emit does base conversion itself crypto: hisilicon - fix spelling mistake "disgest" -> "digest" crypto: chacha20poly1305 - add back missing test vectors and test chunking crypto: x86/poly1305 - fix .gitignore typo tee: fix memory allocation failure checks on drv_data and amdtee crypto: ccree - erase unneeded inline funcs crypto: ccree - make cc_pm_put_suspend() void crypto: ccree - split overloaded usage of irq field crypto: ccree - fix PM race condition crypto: ccree - fix FDE descriptor sequence crypto: ccree - cc_do_send_request() is void func crypto: ccree - fix pm wrongful error reporting crypto: ccree - turn errors to debug msgs crypto: ccree - fix AEAD decrypt auth fail crypto: ccree - fix typo in comment crypto: ccree - fix typos in error msgs crypto: atmel-{aes,sha,tdes} - Retire crypto_platform_data crypto: x86/sha - Eliminate casts on asm implementations ...
2020-01-29dt-bindings: rtc: at91rm9200: document clocks propertyAlexandre Belloni1-0/+4
The clocks property is mandatory, document it. Reported-by: Rob Herring <robh+dt@kernel.org> Acked-by: Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/20200128204200.22201-1-alexandre.belloni@bootlin.com Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2020-01-29dt-bindings: clock: document the fsl-sai driverMichael Walle1-0/+55
Signed-off-by: Michael Walle <michael@walle.cc> Reviewed-by: Rob Herring <robh@kernel.org> Link: https://lkml.kernel.org/r/20200102231101.11834-2-michael@walle.cc Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2020-01-28dt-bindings: fix warnings in validation of qcom,gcc.yamlDafna Hirschfeld1-1/+1
The last example in qcom,gcc.yaml set 'sleep' as the second value of 'clock-names'. According to the schema is should be 'sleep_clk'. Fix the example to conform the schema. This fixes a warning when validating the schema: "clock-names: ... is not valid under any of the given schemas" Signed-off-by: Dafna Hirschfeld <dafna.hirschfeld@collabora.com> Link: https://lkml.kernel.org/r/20200122135741.12123-1-dafna.hirschfeld@collabora.com Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2020-01-28dt-binding: fix compilation error of the example in qcom,gcc.yamlDafna Hirschfeld1-0/+1
Running `make dt_binging_check`, gives the error: DTC Documentation/devicetree/bindings/clock/qcom,gcc.example.dt.yaml Error: Documentation/devicetree/bindings/clock/qcom,gcc.example.dts:111.28-29 syntax error FATAL ERROR: Unable to parse input tree This is because the last example uses the macro RPM_SMD_XO_CLK_SRC which is defined in qcom,rpmcc.h but the include of this header is missing. Add the include to fix the error. Signed-off-by: Dafna Hirschfeld <dafna.hirschfeld@collabora.com> Link: https://lkml.kernel.org/r/20200122134639.11735-1-dafna.hirschfeld@collabora.com Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2020-01-28Merge tag 'irq-core-2020-01-28' of ↵Linus Torvalds4-0/+160
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull irq updates from Thomas Gleixner: "The interrupt departement provides: - A mechanism to shield isolated tasks from managed interrupts: The affinity of managed interrupts is completely controlled by the kernel and user space has no influence on them. The reason is that the automatically assigned affinity correlates to the multi-queue CPU handling of block devices. If the generated affinity mask spaws both housekeeping and isolated CPUs the interrupt could be routed to an isolated CPU which would then be disturbed by I/O submitted by a housekeeping CPU. The new mechamism ensures that as long as one housekeeping CPU is online in the assigned affinity mask the interrupt is routed to a housekeeping CPU. If there is no online housekeeping CPU in the affinity mask, then the interrupt is routed to an isolated CPU to keep the device queue intact, but unless the isolated CPU submits I/O by itself these interrupts are not raised. - A small addon to the device tree irqdomain core code to avoid duplication in irq chip drivers - Conversion of the SiFive PLIC to hierarchical domains - The usual pile of new irq chip drivers: SiFive GPIO, Aspeed SCI, NXP INTMUX, Meson A1 GPIO - The first cut of support for the new ARM GICv4.1 - The usual pile of fixes and improvements in core and driver code" * tag 'irq-core-2020-01-28' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (33 commits) genirq, sched/isolation: Isolate from handling managed interrupts irqchip/gic-v4.1: Allow direct invalidation of VLPIs irqchip/gic-v4.1: Suppress per-VLPI doorbell irqchip/gic-v4.1: Add VPE INVALL callback irqchip/gic-v4.1: Add VPE eviction callback irqchip/gic-v4.1: Add VPE residency callback irqchip/gic-v4.1: Add mask/unmask doorbell callbacks irqchip/gic-v4.1: Plumb skeletal VPE irqchip irqchip/gic-v4.1: Implement the v4.1 flavour of VMOVP irqchip/gic-v4.1: Don't use the VPE proxy if RVPEID is set irqchip/gic-v4.1: Implement the v4.1 flavour of VMAPP irqchip/gic-v4.1: VPE table (aka GICR_VPROPBASER) allocation irqchip/gic-v3: Add GICv4.1 VPEID size discovery irqchip/gic-v3: Detect GICv4.1 supporting RVPEID irqchip/gic-v3-its: Fix get_vlpi_map() breakage with doorbells irqdomain: Fix a memory leak in irq_domain_push_irq() irqchip: Add NXP INTMUX interrupt multiplexer support dt-bindings: interrupt-controller: Add binding for NXP INTMUX interrupt multiplexer irqchip: Define EXYNOS_IRQ_COMBINER irqchip/meson-gpio: Add support for meson a1 SoCs ...
2020-01-28Merge tag 'timers-core-2020-01-27' of ↵Linus Torvalds2-0/+8
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull timer updates from Thomas Gleixner: "The timekeeping and timers departement provides: - Time namespace support: If a container migrates from one host to another then it expects that clocks based on MONOTONIC and BOOTTIME are not subject to disruption. Due to different boot time and non-suspended runtime these clocks can differ significantly on two hosts, in the worst case time goes backwards which is a violation of the POSIX requirements. The time namespace addresses this problem. It allows to set offsets for clock MONOTONIC and BOOTTIME once after creation and before tasks are associated with the namespace. These offsets are taken into account by timers and timekeeping including the VDSO. Offsets for wall clock based clocks (REALTIME/TAI) are not provided by this mechanism. While in theory possible, the overhead and code complexity would be immense and not justified by the esoteric potential use cases which were discussed at Plumbers '18. The overhead for tasks in the root namespace (ie where host time offsets = 0) is in the noise and great effort was made to ensure that especially in the VDSO. If time namespace is disabled in the kernel configuration the code is compiled out. Kudos to Andrei Vagin and Dmitry Sofanov who implemented this feature and kept on for more than a year addressing review comments, finding better solutions. A pleasant experience. - Overhaul of the alarmtimer device dependency handling to ensure that the init/suspend/resume ordering is correct. - A new clocksource/event driver for Microchip PIT64 - Suspend/resume support for the Hyper-V clocksource - The usual pile of fixes, updates and improvements mostly in the driver code" * tag 'timers-core-2020-01-27' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (71 commits) alarmtimer: Make alarmtimer_get_rtcdev() a stub when CONFIG_RTC_CLASS=n alarmtimer: Use wakeup source from alarmtimer platform device alarmtimer: Make alarmtimer platform device child of RTC device alarmtimer: Update alarmtimer_get_rtcdev() docs to reflect reality hrtimer: Add missing sparse annotation for __run_timer() lib/vdso: Only read hrtimer_res when needed in __cvdso_clock_getres() MIPS: vdso: Define BUILD_VDSO32 when building a 32bit kernel clocksource/drivers/hyper-v: Set TSC clocksource as default w/ InvariantTSC clocksource/drivers/hyper-v: Untangle stimers and timesync from clocksources clocksource/drivers/timer-microchip-pit64b: Fix sparse warning clocksource/drivers/exynos_mct: Rename Exynos to lowercase clocksource/drivers/timer-ti-dm: Fix uninitialized pointer access clocksource/drivers/timer-ti-dm: Switch to platform_get_irq clocksource/drivers/timer-ti-dm: Convert to devm_platform_ioremap_resource clocksource/drivers/em_sti: Fix variable declaration in em_sti_probe clocksource/drivers/em_sti: Convert to devm_platform_ioremap_resource clocksource/drivers/bcm2835_timer: Fix memory leak of timer clocksource/drivers/cadence-ttc: Use ttc driver as platform driver clocksource/drivers/timer-microchip-pit64b: Add Microchip PIT64B support clocksource/drivers/hyper-v: Reserve PAGE_SIZE space for tsc page ...
2020-01-28dt-bindings: touchscreen: Convert Goodix touchscreen to json-schemaBenjamin Gaignard2-50/+78
Convert the Goodix binding to DT schema format using json-schema Signed-off-by: Benjamin Gaignard <benjamin.gaignard@st.com> Reviewed-by: Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/20200108091118.5130-3-benjamin.gaignard@st.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2020-01-28dt-bindings: touchscreen: Add touchscreen schemaBenjamin Gaignard2-39/+84
Add touchscreen schema for common properties Signed-off-by: Benjamin Gaignard <benjamin.gaignard@st.com> Reviewed-by: Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/20200108091118.5130-2-benjamin.gaignard@st.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2020-01-27Merge tag 'for-5.6/libata-2020-01-27' of git://git.kernel.dk/linux-blockLinus Torvalds1-0/+7
Pull libata updates from Jens Axboe: "As usual pretty quiet, mostly trivial fixes (or dead code removal), outside of various fixes for ahci_bcrm" * tag 'for-5.6/libata-2020-01-27' of git://git.kernel.dk/linux-block: ata/acard_ahci: remove unused variable n_elem ata: pata_macio: fix comparing pointer to 0 ata: ahci_brcm: BCM7216 reset is self de-asserting ata: ahci_brcm: Perform reset after obtaining resources ata: brcm: fix reset controller API usage ata: brcm: mark PM functions as __maybe_unused ata: ahci_brcm: Support BCM7216 reset controller name dt-bindings: ata: Document BCM7216 AHCI controller compatible ata: ahci_brcm: Add a shutdown callback ata: ahci_brcm: Manage reset line during suspend/resume
2020-01-27Merge tag 'pm-5.6-rc1' of ↵Linus Torvalds2-0/+202
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull power management updates from Rafael Wysocki: "These add ACPI support to the intel_idle driver along with an admin guide document for it, add support for CPR (Core Power Reduction) to the AVS (Adaptive Voltage Scaling) subsystem, add new hardware support in a few places, add some new sysfs attributes, debugfs files and tracepoints, fix bugs and clean up a bunch of things all over. Specifics: - Update the ACPI processor driver in order to export acpi_processor_evaluate_cst() to the code outside of it, add ACPI support to the intel_idle driver based on that and clean up that driver somewhat (Rafael Wysocki). - Add an admin guide document for the intel_idle driver (Rafael Wysocki). - Clean up cpuidle core and drivers, enable compilation testing for some of them (Benjamin Gaignard, Krzysztof Kozlowski, Rafael Wysocki, Yangtao Li). - Fix reference counting of OPP (operating performance points) table structures (Viresh Kumar). - Add support for CPR (Core Power Reduction) to the AVS (Adaptive Voltage Scaling) subsystem (Niklas Cassel, Colin Ian King, YueHaibing). - Add support for TigerLake Mobile and JasperLake to the Intel RAPL power capping driver (Zhang Rui). - Update cpufreq drivers: - Add i.MX8MP support to imx-cpufreq-dt (Anson Huang). - Fix usage of a macro in loongson2_cpufreq (Alexandre Oliva). - Fix cpufreq policy reference counting issues in s3c and brcmstb-avs (chenqiwu). - Fix ACPI table reference counting issue and HiSilicon quirk handling in the CPPC driver (Hanjun Guo). - Clean up spelling mistake in intel_pstate (Harry Pan). - Convert the kirkwood and tegra186 drivers to using devm_platform_ioremap_resource() (Yangtao Li). - Update devfreq core: - Add 'name' sysfs attribute for devfreq devices (Chanwoo Choi). - Clean up the handing of transition statistics and allow them to be reset by writing 0 to the 'trans_stat' devfreq device attribute in sysfs (Kamil Konieczny). - Add 'devfreq_summary' to debugfs (Chanwoo Choi). - Clean up kerneldoc comments and Kconfig indentation (Krzysztof Kozlowski, Randy Dunlap). - Update devfreq drivers: - Add dynamic scaling for the imx8m DDR controller and clean up imx8m-ddrc (Leonard Crestez, YueHaibing). - Fix DT node reference counting and nitialization error code path in rk3399_dmc and add COMPILE_TEST and HAVE_ARM_SMCCC dependency for it (Chanwoo Choi, Yangtao Li). - Fix DT node reference counting in rockchip-dfi and make it use devm_platform_ioremap_resource() (Yangtao Li). - Fix excessive stack usage in exynos-ppmu (Arnd Bergmann). - Fix initialization error code paths in exynos-bus (Yangtao Li). - Clean up exynos-bus and exynos somewhat (Artur Świgoń, Krzysztof Kozlowski). - Add tracepoints for tracking usage_count updates unrelated to status changes in PM-runtime (Michał Mirosław). - Add sysfs attribute to control the "sync on suspend" behavior during system-wide suspend (Jonas Meurer). - Switch system-wide suspend tests over to 64-bit time (Alexandre Belloni). - Make wakeup sources statistics in debugfs cover deleted ones which used to be the case some time ago (zhuguangqing). - Clean up computations carried out during hibernation, update messages related to hibernation and fix a spelling mistake in one of them (Wen Yang, Luigi Semenzato, Colin Ian King). - Add mailmap entry for maintainer e-mail address that has not been functional for several years (Rafael Wysocki)" * tag 'pm-5.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (83 commits) cpufreq: loongson2_cpufreq: adjust cpufreq uses of LOONGSON_CHIPCFG intel_idle: Clean up irtl_2_usec() intel_idle: Move 3 functions closer to their callers intel_idle: Annotate initialization code and data structures intel_idle: Move and clean up intel_idle_cpuidle_devices_uninit() intel_idle: Rearrange intel_idle_cpuidle_driver_init() intel_idle: Clean up NULL pointer check in intel_idle_init() intel_idle: Fold intel_idle_probe() into intel_idle_init() intel_idle: Eliminate __setup_broadcast_timer() cpuidle: fix cpuidle_find_deepest_state() kerneldoc warnings cpuidle: sysfs: fix warnings when compiling with W=1 cpuidle: coupled: fix warnings when compiling with W=1 cpufreq: brcmstb-avs: fix imbalance of cpufreq policy refcount PM: suspend: Add sysfs attribute to control the "sync on suspend" behavior PM / devfreq: Add debugfs support with devfreq_summary file Documentation: admin-guide: PM: Add intel_idle document cpuidle: arm: Enable compile testing for some of drivers PM-runtime: add tracepoints for usage_count changes cpufreq: intel_pstate: fix spelling mistake: "Whethet" -> "Whether" PM: hibernate: fix spelling mistake "shapshot" -> "snapshot" ...
2020-01-27Merge tag 'regulator-v5.6' of ↵Linus Torvalds9-81/+412
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator Pull regulator updates from Mark Brown: "Hardly anything going on in the core this time around with the regulator API and pretty quiet on the driver front: - An API for comparing regulators, useful for devices that need to check if supply voltages exactly match rather than just nominally match. - Conversion of several DT bindings to YAML format. - Conversion of I2C drivers to probe_new(). - New drivers for Monolithic MPQ7920 and MP8859, and Rohm BD71828" * tag 'regulator-v5.6' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator: (34 commits) dt-bindings: regulator: add document bindings for mpq7920 regulator: core: Fix exported symbols to the exported GPL version regulator: mpq7920: Fix incorrect defines regulator: vqmmc-ipq4019: Fix platform_no_drv_owner.cocci warnings regulator: vctrl-regulator: Avoid deadlock getting and setting the voltage regulator fix for "regulator: core: Add regulator_is_equal() helper" regulator: core: Add regulator_is_equal() helper regulator: mpq7920: Convert to use .probe_new regulator: mpq7920: Remove unneeded fields from struct mpq7920_regulator_info regulator: vqmmc-ipq4019: Trivial clean up regulator: vqmmc-ipq4019: Remove ipq4019_regulator_remove regulator: bindings: Drop document bindings for mpq7920 dt-bindings: Drop entry for Monolithic Power System, MPS regulator: bd718x7: Simplify the code by removing struct bd718xx_pmic_inits regulator: add IPQ4019 SDHCI VQMMC LDO driver regulator: Convert i2c drivers to use .probe_new regulator: mpq7920: Check the correct variable in mpq7920_regulator_register() regulator: mpq7920: Fix Woverflow warning on conversion regulator: mp8859: tidy up white space in probe regulator: mpq7920: add mpq7920 regulator driver ...
2020-01-27Merge tag 'spi-v5.6' of ↵Linus Torvalds4-73/+108
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi Pull spi updates from Mark Brown: "Not much going on in the core for SPI this time but a reasonable amount of change in the drivers: - Removal of dmal_request_slave_channel() from Peter Ujfalusi. - More conversions of drivers to GPIO descriptors from Linus Walleij. - A big rework of the sh-msiof driver from Geert Uytterhoeven moving it over to the generic native chipselect support. - DMA support for the uniphier driver from Kunihiko Hayashi. - New driver support for HiSilcon v3xx SPI NOR controllers from John Garry" * tag 'spi-v5.6' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi: (52 commits) dt-binding: spi: add NPCM PSPI reset binding spi: pxa2xx: Avoid touching SSCR0_SSE on MMP2 spi: spi-fsl-qspi: Ensure width is respected in spi-mem operations spi: npcm-pspi: modify reset support spi: npcm-pspi: improve spi transfer performance spi: spi-ti-qspi: fix warning spi: npcm-pspi: fix 16 bit send and receive support spi: pxa2xx: Add support for Intel Comet Lake PCH-V spi: fsl: simplify error path in of_fsl_spi_probe() spi: fsl-lpspi: fix only one cs-gpio working spi: spi-ti-qspi: optimize byte-transfers spi: spi-ti-qspi: support large flash devices spi: spi-qcom-qspi: Use device managed memory for clk_bulk_data MAINTAINERS: Add a maintainer for the HiSilicon v3xx SFC driver spi: Add HiSilicon v3xx SPI NOR flash controller driver dt-bindings: spi_atmel: add microchip,sam9x60-spi spi: bcm2835: Raise maximum number of slaves to 4 spi: sh-msiof: Do not redefine STR while compile testing spi: rspi: Add support for GPIO chip selects spi: rspi: Add support for multiple native chip selects ...
2020-01-27Merge tag 'dmaengine-5.6-rc1' of git://git.infradead.org/users/vkoul/slave-dmaLinus Torvalds6-2/+252
Pull dmaengine updates from Vinod Koul: "This time we have a bunch of core changes to support dynamic channels, hotplug of controllers, new apis for metadata ops etc along with new drivers for Intel data accelerators, TI K3 UDMA, PLX DMA engine and hisilicon Kunpeng DMA engine. Also usual assorted updates to drivers. Core: - Support for dynamic channels - Removal of various slave wrappers - Make few slave request APIs as private to dmaengine - Symlinks between channels and slaves - Support for hotplug of controllers - Support for metadata_ops for dma_async_tx_descriptor - Reporting DMA cached data amount - Virtual dma channel locking updates New drivers/device/feature support support: - Driver for Intel data accelerators - Driver for TI K3 UDMA - Driver for PLX DMA engine - Driver for hisilicon Kunpeng DMA engine - Support for eDMA support for QorIQ LS1028A in fsl edma driver - Support for cyclic dma in sun4i driver - Support for X1830 in JZ4780 driver" * tag 'dmaengine-5.6-rc1' of git://git.infradead.org/users/vkoul/slave-dma: (62 commits) dmaengine: Create symlinks between DMA channels and slaves dmaengine: hisilicon: Add Kunpeng DMA engine support dmaengine: idxd: add char driver to expose submission portal to userland dmaengine: idxd: connect idxd to dmaengine subsystem dmaengine: idxd: add descriptor manipulation routines dmaengine: idxd: add sysfs ABI for idxd driver dmaengine: idxd: add configuration component of driver dmaengine: idxd: Init and probe for Intel data accelerators dmaengine: add support to dynamic register/unregister of channels dmaengine: break out channel registration x86/asm: add iosubmit_cmds512() based on MOVDIR64B CPU instruction dmaengine: ti: k3-udma: fix spelling mistake "limted" -> "limited" dmaengine: s3c24xx-dma: fix spelling mistake "to" -> "too" dmaengine: Move dma_get_{,any_}slave_channel() to private dmaengine.h dmaengine: Remove dma_request_slave_channel_compat() wrapper dmaengine: Remove dma_device_satisfies_mask() wrapper dt-bindings: fsl-imx-sdma: Add i.MX8MM/i.MX8MN/i.MX8MP compatible string dmaengine: zynqmp_dma: fix burst length configuration dmaengine: sun4i: Add support for cyclic requests with dedicated DMA dmaengine: fsl-qdma: fix duplicated argument to && ...
2020-01-27Merge tag 'mmc-v5.6' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmcLinus Torvalds11-207/+316
Pull MMC updates from Ulf Hansson: "There are no updates for the MEMSTICK subsystem this time. But note that I am also carrying a patch from the pinctrl tree, which has been shared through an immutable branch. Summary: MMC core: - Convert to reasonable timeouts for all CMD6 commands (updates for BKOPS, CACHE_FLUSH and INAND_CMD38_ARG_EXT_CSD) for eMMC - Respect f_max clock rate at card initialization - Add gpiod_toggle_active_low() API - Consolidate slot-gpio code by using gpiod_toggle_active_low() MMC host: - Add pinctrl_select_default_state() API - Consolidate pintctrl code by using pinctrl_select_default_state() - mmci: Support any block sizes for SDIO for some variants - mmci: Enable reset control for stm32_sdmmc - mmc_spi: Toggle SPI_CS_HIGH polarity rather than hard-coding it - renesas_sdhi: Add support for the r8a77961 variant - renesas_sdhi: A few minor improvements - rockchip-dw-mshc: Add support for the rk3308 variant - sdhci: Enable support for external DMA controllers - sdhci: Fixup error path when sending CMD12 - sdhci-brcmstb: Add support for 7216b0 variant - sdhci-brcmstb: Add support for command queuing (CQHCI) - sdhci-brcmstb: Add support for eMMC HS400ES mode - sdhci-msm: Add support for the sc7180 variant - sdhci-msm: Add support for command queuing (CQHCI) - sdhci-of-at91: Add support for the SAM9x60 variant - sdhci-of-at91: Improve support for tunings - sdhci-of-esdhc: A few fixups for some clock related issues - sdhci-omap: Add support for the am335x and the am437x variants - sdhci-omap: Improve support for erase operations - sdhci-omap: Add support for external DMA" * tag 'mmc-v5.6' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc: (89 commits) mmc: core: Default to generic_cmd6_time as timeout in __mmc_switch() mmc: block: Use generic_cmd6_time when modifying INAND_CMD38_ARG_EXT_CSD mmc: core: Specify timeouts for BKOPS and CACHE_FLUSH for eMMC mmc: sdhci-cadence: remove unneeded 'inline' marker dt-bindings: mmc: rockchip-dw-mshc: add description for rk3308 dt-bindings: mmc: convert rockchip dw-mshc bindings to yaml dt-bindings: mmc: convert synopsys dw-mshc bindings to yaml mmc: sdhci-msm: Add CQHCI support for sdhci-msm mmc: sdhci: Let a vendor driver supply and update ADMA descriptor size mmc: sdhci-of-esdhc: fix serious issue clock is always disabled mmc: sdhci-of-esdhc: fix transfer mode register reading mmc: sdhci-brcmstb: Fix incorrect switch to HS mode mmc: sdhci-brcmstb: Add support for Command Queuing (CQE) mmc: sdhci-brcmstb: Add shutdown callback mmc: sdhci-brcmstb: Fix driver to defer on clk_get defer mmc: sdhci-brcmstb: Add ability to use HS400ES transfer mode dt-bindings: mmc: brcm,sdhci-brcmstb: Add support for 7216b0 mmc: core: limit probe clock frequency to configured f_max mmc: sdhci-milbeaut: Remove redundant platform_get_irq error message mmc: sdhci: fix an issue of mixing different types ...
2020-01-27Merge branch 'regulator-5.6' into regulator-nextMark Brown1-0/+121
2020-01-27dt-bindings: regulator: add document bindings for mpq7920Saravanan Sekar1-0/+121
Add device tree binding information for mpq7920 regulator driver. Example bindings for mpq7920 are added. Signed-off-by: Saravanan Sekar <sravanhome@gmail.com> Reviewed-by: Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/20200123215338.11109-1-sravanhome@gmail.com Signed-off-by: Mark Brown <broonie@kernel.org>
2020-01-27Merge tag 'hwmon-for-v5.6' of ↵Linus Torvalds2-0/+111
git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging Pull hwmon updates from Guenter Roeck: "core: - Add support for enable attributes to hwmon core - Add intrusion templates pmbus: - Support for Infineon Multi-phase xdpe122 family controllers - Support for Intel IMVP9 and AMD 6.25mV modes - Support for vid mode detection per page bases - Detect if chip is write protected - Support for MAX20730, MAX20734, MAX20743, MAX20796, UCD90320, TPS53688 - Various improvements to ibm-cffps driver k10temp: - Support for additional temperature sensors as well as voltage and current telemetry for Zen CPUs w83627ehf: - Remove support for NCT6775, NCT6776 (they have their own driver) New drivers: - ADM1177 - MAX31730 - Driver for disk and solid state drives with temperature sensors Other: - pwm-fan: stop fan on shutdown" * tag 'hwmon-for-v5.6' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging: (35 commits) hwmon: (k10temp) Display up to eight sets of CCD temperatures hwmon: (k10temp) Add debugfs support hwmon: (k10temp) Don't show temperature limits on Ryzen (Zen) CPUs hwmon: (k10temp) Show core and SoC current and voltages on Ryzen CPUs hwmon: (k10temp) Report temperatures per CPU die hmon: (k10temp) Convert to use devm_hwmon_device_register_with_info hwmon: (k10temp) Use bitops hwmon: (pwm-fan) stop fan on shutdown MAINTAINERS: add entry for ADM1177 driver dt-binding: hwmon: Add documentation for ADM1177 hwmon: (adm1177) Add ADM1177 Hot Swap Controller and Digital Power Monitor driver docs: hwmon: Include 'xdpe12284.rst' into docs hwmon: (pmbus) Add support for Infineon Multi-phase xdpe122 family controllers hwmon: (pmbus/tps53679) Extend device list supported by driver hwmon: (pmbus/core) Add support for Intel IMVP9 and AMD 6.25mV modes hwmon: (pmbus/core) Add support for vid mode detection per page bases hwmon: (pmbus/ibm-cffps) Prevent writing on_off_config with bad data hwmon: (w83627ehf) Remove set but not used variable 'fan4min' hwmon: Driver for disk and solid state drives with temperature sensors hwmon: (pmbus/ibm-cffps) Fix the LED behavior when turned off ...
2020-01-27dt-bindings: mediatek: mt2712: Add #reset-cellsyong.liang1-0/+1
Add #reset-cells and update mtk-wdt.txt Signed-off-by: yong.liang <yong.liang@mediatek.com> Signed-off-by: Jiaxin Yu <jiaxin.yu@mediatek.com> Reviewed-by: Yingjoe Chen <yingjoe.chen@mediatek.com> Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de> Reviewed-by: Rob Herring <robh@kernel.org> Reviewed-by: Guenter Roeck <groeck7@gmail.com> Link: https://lore.kernel.org/r/20200115085828.27791-3-yong.liang@mediatek.com Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2020-01-27dt-bindings: mediatek: mt8183: Add #reset-cellsyong.liang1-3/+7
Add #reset-cells property and update example Signed-off-by: yong.liang <yong.liang@mediatek.com> Signed-off-by: Jiaxin Yu <jiaxin.yu@mediatek.com> Reviewed-by: Yingjoe Chen <yingjoe.chen@mediatek.com> Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de> Reviewed-by: Rob Herring <robh@kernel.org> Reviewed-by: Guenter Roeck <groeck7@gmail.com> Link: https://lore.kernel.org/r/20200115085828.27791-2-yong.liang@mediatek.com Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2020-01-27dt-bindings: watchdog: da9062: add suspend disable optionMarco Felsch1-0/+5
Document the watchdog disable option which can be used if the hardware automatic suspend option is broken. Signed-off-by: Marco Felsch <m.felsch@pengutronix.de> Reviewed-by: Adam Thomson <Adam.Thomson.Opensource@diasemi.com> Reviewed-by: Rob Herring <robh@kernel.org> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/20200108095704.23233-3-m.felsch@pengutronix.de Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2020-01-27dt-bindings: brcm,avs-ro-thermal: Fix binding check issuesStefan Wahren1-3/+6
Drop the reg property since this only necessary for the parent and add the missing thermal-sensor-cells property description. Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com> Fixes: 37e9cc08e9678 ("dt-bindings: Add Broadcom AVS RO thermal") Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/1579200077-17496-1-git-send-email-stefan.wahren@i2se.com
2020-01-27dt-bindings: thermal: Define BCM7216 thermal sensor compatibleFlorian Fainelli1-2/+6
BCM7216 is a 16nm process STB chip, which requires a different compatible string to differentiate different temperature formulas. Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/20200114190607.29339-4-f.fainelli@gmail.com
2020-01-27dt-bindings: Add Broadcom AVS RO thermalStefan Wahren1-0/+45
Since the BCM2711 doesn't have a AVS TMON block, the thermal information must be retrieved from the AVS ring oscillator block. This block is part of the AVS monitor which contains a bunch of raw sensors. Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com> Reviewed-by: Rob Herring <robh@kernel.org> Reviewed-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/1578941778-23321-2-git-send-email-stefan.wahren@i2se.com
2020-01-27Merge branch 'pm-devfreq'Rafael J. Wysocki1-0/+72
* pm-devfreq: (24 commits) PM / devfreq: Add debugfs support with devfreq_summary file PM / devfreq: exynos: Rename Exynos to lowercase PM / devfreq: imx8m-ddrc: Fix inconsistent IS_ERR and PTR_ERR PM / devfreq: exynos-bus: Add error log when fail to get devfreq-event PM / devfreq: exynos-bus: Disable devfreq-event device when fails PM / devfreq: rk3399_dmc: Disable devfreq-event device when fails PM / devfreq: imx8m-ddrc: Remove unused defines PM / devfreq: exynos-bus: Reduce goto statements and remove unused headers PM / devfreq: rk3399_dmc: Add COMPILE_TEST and HAVE_ARM_SMCCC dependency PM / devfreq: rockchip-dfi: Convert to devm_platform_ioremap_resource PM / devfreq: rk3399_dmc: Add missing of_node_put() PM / devfreq: rockchip-dfi: Add missing of_node_put() PM / devfreq: Fix multiple kernel-doc warnings PM / devfreq: exynos-bus: Extract exynos_bus_profile_init_passive() PM / devfreq: exynos-bus: Extract exynos_bus_profile_init() PM / devfreq: Move declaration of DEVICE_ATTR_RW(min_freq) PM / devfreq: Move statistics to separate struct devfreq_stats PM / devfreq: Add clearing transitions stats PM / devfreq: Change time stats to 64-bit PM / devfreq: Add new name attribute for sysfs ...
generated by cgit v1.2.3 (git 2.39.0) at 2024-11-16 21:32:54 +0300