Merge tag 'staging-5.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging

Pull staging and IIO updates from Greg KH:
 "Here is the big staging/iio driver patches for 5.6-rc1

  Included in here are:

   - lots of new IIO drivers and updates for that subsystem

   - the usual huge quantity of minor cleanups for staging drivers

   - removal of the following staging drivers:
       - isdn/avm
       - isdn/gigaset
       - isdn/hysdn
       - octeon-usb
       - octeon ethernet

  Overall we deleted far more lines than we added, removing over 40k of
  old and obsolete driver code.

  All of these changes have been in linux-next for a while with no
  reported issues"

* tag 'staging-5.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: (353 commits)
  staging: most: usb: check for NULL device
  staging: next: configfs: fix release link
  staging: most: core: fix logging messages
  staging: most: core: remove container struct
  staging: most: remove struct device core driver
  staging: most: core: drop device reference
  staging: most: remove device from interface structure
  staging: comedi: drivers: fix spelling mistake "to" -> "too"
  staging: exfat: remove fs_func struct.
  staging: wilc1000: avoid mutex unlock without lock in wilc_wlan_handle_txq()
  staging: wilc1000: return zero on success and non-zero on function failure
  staging: axis-fifo: replace spinlock with mutex
  staging: wilc1000: remove unused code prior to throughput enhancement in SPI
  staging: wilc1000: added 'wilc_' prefix for 'struct assoc_resp' name
  staging: wilc1000: move firmware API struct's to separate header file
  staging: wilc1000: remove use of infinite loop conditions
  staging: kpc2000: rename variables with kpc namespace
  staging: vt6656: Remove memory buffer from vnt_download_firmware.
  staging: vt6656: Just check NEWRSR_DECRYPTOK for RX_FLAG_DECRYPTED.
  staging: vt6656: Use vnt_rx_tail struct for tail variables.
  ...

13 files changed, 365 insertions, 17 deletions

diff --git a/Documentation/devicetree/bindings/iio/accel/adi,adis16240.yaml b/Documentation/devicetree/bindings/iio/accel/adi,adis16240.yaml
new file mode 100644
index 000000000000..4147f02b5e3c
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/accel/adi,adis16240.yaml
@@ -0,0 +1,49 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/accel/adi,adis16240.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: ADIS16240 Programmable Impact Sensor and Recorder driver
+
+maintainers:
+  - Alexandru Ardelean <alexandru.ardelean@analog.com>
+
+description: |
+  ADIS16240 Programmable Impact Sensor and Recorder driver that supports
+  SPI interface.
+    https://www.analog.com/en/products/adis16240.html
+
+properties:
+  compatible:
+    enum:
+      - adi,adis16240
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - interrupts
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+    spi0 {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        /* Example for a SPI device node */
+        accelerometer@0 {
+            compatible = "adi,adis16240";
+            reg = <0>;
+            spi-max-frequency = <2500000>;
+            interrupt-parent = <&gpio0>;
+            interrupts = <0 IRQ_TYPE_LEVEL_HIGH>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/iio/accel/bma180.txt b/Documentation/devicetree/bindings/iio/accel/bma180.txt
index 3b25b4c4d446..f53237270b32 100644
--- a/Documentation/devicetree/bindings/iio/accel/bma180.txt
+++ b/Documentation/devicetree/bindings/iio/accel/bma180.txt
@@ -1,11 +1,14 @@
-* Bosch BMA180 / BMA250 triaxial acceleration sensor
+* Bosch BMA180 / BMA25x triaxial acceleration sensor
 
 http://omapworld.com/BMA180_111_1002839.pdf
 http://ae-bst.resource.bosch.com/media/products/dokumente/bma250/bst-bma250-ds002-05.pdf
 
 Required properties:
 
-  - compatible : should be "bosch,bma180" or "bosch,bma250"
+  - compatible : should be one of:
+    "bosch,bma180"
+    "bosch,bma250"
+    "bosch,bma254"
   - reg : the I2C address of the sensor
 
 Optional properties:
diff --git a/Documentation/devicetree/bindings/iio/accel/bosch,bma400.yaml b/Documentation/devicetree/bindings/iio/accel/bosch,bma400.yaml
new file mode 100644
index 000000000000..c1c6d6f223cf
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/accel/bosch,bma400.yaml
@@ -0,0 +1,54 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/accel/bosch,bma400.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Bosch BMA400 triaxial acceleration sensor
+
+maintainers:
+  - Dan Robertson <dan@dlrobertson.com>
+
+description: |
+  Acceleration and temperature iio sensors with an i2c interface
+
+  Specifications about the sensor can be found at:
+    https://ae-bst.resource.bosch.com/media/_tech/media/datasheets/BST-BMA400-DS000.pdf
+
+properties:
+  compatible:
+    enum:
+      - bosch,bma400
+
+  reg:
+    maxItems: 1
+
+  vdd-supply:
+    description: phandle to the regulator that provides power to the accelerometer
+
+  vddio-supply:
+    description: phandle to the regulator that provides power to the sensor's IO
+
+  interrupts:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+    i2c {
+      #address-cells = <1>;
+      #size-cells = <0>;
+      accelerometer@14 {
+        compatible = "bosch,bma400";
+        reg = <0x14>;
+        vdd-supply = <&vdd>;
+        vddio-supply = <&vddio>;
+        interrupt-parent = <&gpio0>;
+        interrupts = <0 IRQ_TYPE_LEVEL_HIGH>;
+      };
+    };
diff --git a/Documentation/devicetree/bindings/iio/accel/kionix,kxcjk1013.txt b/Documentation/devicetree/bindings/iio/accel/kionix,kxcjk1013.txt
index eb76a02e2a82..ce950e162d5d 100644
--- a/Documentation/devicetree/bindings/iio/accel/kionix,kxcjk1013.txt
+++ b/Documentation/devicetree/bindings/iio/accel/kionix,kxcjk1013.txt
@@ -9,9 +9,16 @@ Required properties:
     "kionix,kxtf9"
  - reg: i2c slave address
 
+Optional properties:
+
+  - mount-matrix: an optional 3x3 mounting rotation matrix
+
 Example:
 
 kxtf9@f {
 	compatible = "kionix,kxtf9";
 	reg = <0x0F>;
+	mount-matrix =	"0", "1", "0",
+			"1", "0", "0",
+			"0", "0", "1";
 };
diff --git a/Documentation/devicetree/bindings/iio/adc/adi,ad7091r5.yaml b/Documentation/devicetree/bindings/iio/adc/adi,ad7091r5.yaml
new file mode 100644
index 000000000000..31ffa275f5fa
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/adc/adi,ad7091r5.yaml
@@ -0,0 +1,54 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/adc/adi,ad7091r5.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Analog Devices AD7091R5 4-Channel 12-Bit ADC
+
+maintainers:
+  - Beniamin Bia <beniamin.bia@analog.com>
+
+description: |
+  Analog Devices AD7091R5 4-Channel 12-Bit ADC
+  https://www.analog.com/media/en/technical-documentation/data-sheets/ad7091r-5.pdf
+
+properties:
+  compatible:
+    enum:
+      - adi,ad7091r5
+
+  reg:
+    maxItems: 1
+
+  vref-supply:
+    description:
+      Phandle to the vref power supply
+
+  interrupts:
+    maxItems: 1
+
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        adc@2f {
+                compatible = "adi,ad7091r5";
+                reg = <0x2f>;
+
+                interrupts = <25 IRQ_TYPE_EDGE_FALLING>;
+                interrupt-parent = <&gpio>;
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/iio/adc/lltc,ltc2496.yaml b/Documentation/devicetree/bindings/iio/adc/lltc,ltc2496.yaml
new file mode 100644
index 000000000000..59009997dca0
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/adc/lltc,ltc2496.yaml
@@ -0,0 +1,47 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/adc/lltc,ltc2496.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Linear Technology / Analog Devices LTC2496 ADC
+
+maintainers:
+ - Lars-Peter Clausen <lars@metafoo.de>
+ - Michael Hennerich <Michael.Hennerich@analog.com>
+ - Stefan Popa <stefan.popa@analog.com>
+
+properties:
+  compatible:
+    enum:
+      - lltc,ltc2496
+
+  vref-supply:
+    description: phandle to an external regulator providing the reference voltage
+    allOf:
+      - $ref: /schemas/types.yaml#/definitions/phandle
+
+  reg:
+    description: spi chipselect number according to the usual spi bindings
+
+  spi-max-frequency:
+    description: maximal spi bus frequency supported
+
+required:
+  - compatible
+  - vref-supply
+  - reg
+
+examples:
+  - |
+    spi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        adc@0 {
+            compatible = "lltc,ltc2496";
+            reg = <0>;
+            vref-supply = <&ltc2496_reg>;
+            spi-max-frequency = <2000000>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/iio/adc/sigma-delta-modulator.txt b/Documentation/devicetree/bindings/iio/adc/sigma-delta-modulator.txt
deleted file mode 100644
index 59b92cd32552..000000000000
--- a/Documentation/devicetree/bindings/iio/adc/sigma-delta-modulator.txt
+++ /dev/null
@@ -1,13 +0,0 @@
-Device-Tree bindings for sigma delta modulator
-
-Required properties:
-- compatible: should be "ads1201", "sd-modulator". "sd-modulator" can be use
-	as a generic SD modulator if modulator not specified in compatible list.
-- #io-channel-cells = <0>: See the IIO bindings section "IIO consumers".
-
-Example node:
-
-	ads1202: adc {
-		compatible = "sd-modulator";
-		#io-channel-cells = <0>;
-	};
diff --git a/Documentation/devicetree/bindings/iio/adc/sigma-delta-modulator.yaml b/Documentation/devicetree/bindings/iio/adc/sigma-delta-modulator.yaml
new file mode 100644
index 000000000000..a390343d0c2a
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/adc/sigma-delta-modulator.yaml
@@ -0,0 +1,37 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/adc/sigma-delta-modulator.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Device-Tree bindings for sigma delta modulator
+
+maintainers:
+  - Arnaud Pouliquen <arnaud.pouliquen@st.com>
+
+properties:
+  compatible:
+    description: |
+      "sd-modulator" can be used as a generic SD modulator,
+      if the modulator is not specified in the compatible list.
+    enum:
+      - sd-modulator
+      - ads1201
+
+  '#io-channel-cells':
+    const: 0
+
+required:
+  - compatible
+  - '#io-channel-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    ads1202: adc {
+      compatible = "sd-modulator";
+      #io-channel-cells = <0>;
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/iio/imu/adi,adis16480.txt b/Documentation/devicetree/bindings/iio/imu/adi,adis16480.txt
index ed7783f45233..cd903a1d880d 100644
--- a/Documentation/devicetree/bindings/iio/imu/adi,adis16480.txt
+++ b/Documentation/devicetree/bindings/iio/imu/adi,adis16480.txt
@@ -8,6 +8,7 @@ Required properties for the ADIS16480:
 	* "adi,adis16480"
 	* "adi,adis16485"
 	* "adi,adis16488"
+	* "adi,adis16490"
 	* "adi,adis16495-1"
 	* "adi,adis16495-2"
 	* "adi,adis16495-3"
diff --git a/Documentation/devicetree/bindings/iio/pressure/asc,dlhl60d.yaml b/Documentation/devicetree/bindings/iio/pressure/asc,dlhl60d.yaml
new file mode 100644
index 000000000000..9f5ca9c42025
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/pressure/asc,dlhl60d.yaml
@@ -0,0 +1,51 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/pressure/asc,dlhl60d.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: All Sensors DLH series low voltage digital pressure sensors
+
+maintainers:
+  - Tomislav Denis <tomislav.denis@avl.com>
+
+description: |
+  Bindings for the All Sensors DLH series pressure sensors.
+
+  Specifications about the sensors can be found at:
+    http://www.allsensors.com/cad/DS-0355_Rev_B.PDF
+
+properties:
+  compatible:
+    enum:
+      - asc,dlhl60d
+      - asc,dlhl60g
+
+  reg:
+    description: I2C device address
+    maxItems: 1
+
+  interrupts:
+    description: interrupt mapping for EOC(data ready) pin
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    i2c0 {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        pressure@29 {
+            compatible = "asc,dlhl60d";
+            reg = <0x29>;
+            interrupt-parent = <&gpio0>;
+            interrupts = <10 IRQ_TYPE_EDGE_RISING>;
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/iio/proximity/parallax-ping.yaml b/Documentation/devicetree/bindings/iio/proximity/parallax-ping.yaml
new file mode 100644
index 000000000000..a079c9921af6
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/proximity/parallax-ping.yaml
@@ -0,0 +1,51 @@
+# SPDX-License-Identifier: (GPL-2.0-or-later OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/proximity/parallax-ping.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Parallax PING))) and LaserPING range finder
+
+maintainers:
+  - Andreas Klinger <ak@it-klinger.de>
+
+description: |
+  Bit-banging driver using one GPIO:
+  - ping-gpios is raised by the driver to start measurement
+  - direction of ping-gpio is then switched into input with an interrupt
+    for receiving distance value as PWM signal
+
+  Specifications about the devices can be found at:
+  http://parallax.com/sites/default/files/downloads/28041-LaserPING-2m-Rangefinder-Guide.pdf
+  http://parallax.com/sites/default/files/downloads/28015-PING-Documentation-v1.6.pdf
+
+properties:
+  compatible:
+    enum:
+      - parallax,ping
+      - parallax,laserping
+
+  ping-gpios:
+    description:
+      Definition of the GPIO for the triggering and echo (output and input)
+      This GPIO is set for about 5 us by the driver to tell the device it
+      should initiate the measurement cycle. Afterwards the GPIO is switched
+      to input direction with an interrupt. The device sets it and the
+      length of the input signal corresponds to the measured distance.
+      It needs to be an GPIO which is able to deliver an interrupt because
+      the time between two interrupts is measured in the driver.
+      See Documentation/devicetree/bindings/gpio/gpio.txt for information
+      on how to specify a consumer gpio.
+    maxItems: 1
+
+required:
+  - compatible
+  - ping-gpios
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    proximity {
+        compatible = "parallax,laserping";
+        ping-gpios = <&gpio0 26 GPIO_ACTIVE_HIGH>;
+    };
diff --git a/Documentation/devicetree/bindings/iio/temperature/maxim_thermocouple.txt b/Documentation/devicetree/bindings/iio/temperature/maxim_thermocouple.txt
index 28bc5c4d965b..bb85cd0e039c 100644
--- a/Documentation/devicetree/bindings/iio/temperature/maxim_thermocouple.txt
+++ b/Documentation/devicetree/bindings/iio/temperature/maxim_thermocouple.txt
@@ -5,7 +5,10 @@ Maxim thermocouple support
 
 Required properties:
 
-	- compatible: must be "maxim,max31855" or "maxim,max6675"
+	- compatible: must be "maxim,max6675" or one of the following:
+	   "maxim,max31855k", "maxim,max31855j", "maxim,max31855n",
+	   "maxim,max31855s", "maxim,max31855t", "maxim,max31855e",
+	   "maxim,max31855r"; the generic "max,max31855" is deprecated.
 	- reg: SPI chip select number for the device
 	- spi-max-frequency: must be 4300000
 	- spi-cpha: must be defined for max6675 to enable SPI mode 1
@@ -15,7 +18,7 @@ Required properties:
 Example:
 
 	max31855@0 {
-		compatible = "maxim,max31855";
+		compatible = "maxim,max31855k";
 		reg = <0>;
 		spi-max-frequency = <4300000>;
 	};
diff --git a/Documentation/devicetree/bindings/vendor-prefixes.yaml b/Documentation/devicetree/bindings/vendor-prefixes.yaml
index 9cb3bc683db7..315ebac520b3 100644
--- a/Documentation/devicetree/bindings/vendor-prefixes.yaml
+++ b/Documentation/devicetree/bindings/vendor-prefixes.yaml
@@ -109,6 +109,8 @@ patternProperties:
     description: Artesyn Embedded Technologies Inc.
   "^asahi-kasei,.*":
     description: Asahi Kasei Corp.
+  "^asc,.*":
+    description: All Sensors Corporation
   "^aspeed,.*":
     description: ASPEED Technology Inc.
   "^asus,.*":
@@ -717,6 +719,8 @@ patternProperties:
     description: Panasonic Corporation
   "^parade,.*":
     description: Parade Technologies Inc.
+  "^parallax,.*":
+    description: Parallax Inc.
   "^pda,.*":
     description: Precision Design Associates, Inc.
   "^pericom,.*":