| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Add FSS regions at 0x50000000, 0x400000000, and 0x600000000. Although
not used currently by the Linux FSS driver, these regions belong to
the FSS and should be included in the ranges mapping.
While here, a couple of these numbers had missing zeros which was
hidden by odd alignments, fix both these issues.
Signed-off-by: Andrew Davis <afd@ti.com>
Reviewed-by: Santhosh Kumar K <s-k6@ti.com>
Link: https://lore.kernel.org/r/20240828172956.26630-4-afd@ti.com
Signed-off-by: Nishanth Menon <nm@ti.com>
|
|
Add FSS regions at 0x50000000, 0x400000000, and 0x600000000. Although
not used currently by the Linux FSS driver, these regions belong to
the FSS and should be included in the ranges mapping.
While here, a couple of these numbers had missing zeros which was
hidden by odd alignments, fix both these issues.
Signed-off-by: Andrew Davis <afd@ti.com>
Reviewed-by: Santhosh Kumar K <s-k6@ti.com>
Link: https://lore.kernel.org/r/20240828172956.26630-3-afd@ti.com
Signed-off-by: Nishanth Menon <nm@ti.com>
|
|
Add FSS regions at 0x50000000, 0x400000000, and 0x600000000. Although
not used currently by the Linux FSS driver, these regions belong to
the FSS and should be included in the ranges mapping.
While here, a couple of these numbers had missing zeros which was
hidden by odd alignments, fix both these issues.
Signed-off-by: Andrew Davis <afd@ti.com>
Reviewed-by: Santhosh Kumar K <s-k6@ti.com>
Link: https://lore.kernel.org/r/20240828172956.26630-2-afd@ti.com
Signed-off-by: Nishanth Menon <nm@ti.com>
|
|
USB on AM64 is the same peripheral as on J721E. It has a specific
compatible for potential integration details. Express this
relationship, matching what the dt-bindings indicate.
Signed-off-by: Théo Lebrun <theo.lebrun@bootlin.com>
Reviewed-by: Roger Quadros <rogerq@kernel.org>
Link: https://lore.kernel.org/r/20240726-s2r-cdns-v5-12-8664bfb032ac@bootlin.com
Signed-off-by: Nishanth Menon <nm@ti.com>
|
|
This adds node for E5010 JPEG Encoder which is a stateful JPEG Encoder
present in AM62A SoC [1], supporting baseline encoding of semiplanar based
YUV420 and YUV422 raw video formats to JPEG encoding, with resolutions
supported from 64x64 to 8kx8k.
E5010 JPEG Encoder IP is present in main domain, so this also adds address
range for core and mmu regions of E5010 IP in cbass_main node.
Link: https://www.ti.com/lit/pdf/spruj16 [1]
Signed-off-by: Devarsh Thakkar <devarsht@ti.com>
Link: https://lore.kernel.org/r/20240826162250.380005-2-devarsht@ti.com
Signed-off-by: Nishanth Menon <nm@ti.com>
|
|
CAN instances 0 and 1 in the mcu domain and 0 in the main domain are
brought on the evm through headers J5, J8 and J10 respectively. Thus,
add their respective transceiver's 0, 1 and 2 dt nodes as well as
add the required pinmux to add support for these CAN instances.
Signed-off-by: Bhavya Kapoor <b-kapoor@ti.com>
Reviewed-by: Judith Mendez <jm@ti.com>
Link: https://lore.kernel.org/r/20240827105644.575862-2-b-kapoor@ti.com
Signed-off-by: Nishanth Menon <nm@ti.com>
|
|
System firmware uses main_uart5 in J722S EVM for trace data.
Thus, describe it in device tree for completeness,
adding the pinmux and mark it as reserved.
Signed-off-by: Bhavya Kapoor <b-kapoor@ti.com>
Link: https://lore.kernel.org/r/20240827105644.575862-3-b-kapoor@ti.com
Signed-off-by: Nishanth Menon <nm@ti.com>
|
|
wkup_uart0 is a reserved node that is used by Device Manager firmware.
Only TX and RX pins are required for the firmware and enabling pinctrl
for CTS and RTS breaks the wakeup functionality of wkup_uart0. Drop the
conflicting muxes.
Signed-off-by: Vibhore Vardhan <vibhore@ti.com>
Signed-off-by: Bryan Brattlof <bb@ti.com>
Link: https://lore.kernel.org/r/20240826-am62p-v1-1-b713b48628d1@ti.com
Signed-off-by: Nishanth Menon <nm@ti.com>
|
|
The remoteproc firmware like of R5F and DSPs in the MAIN voltage domain
use timers. Therefore, change the status of the timer nodes to
"reserved" to avoid any clash. Usage is described as below:
+===================+=============+
| Remoteproc node | Timer Node |
+===================+=============+
| main_r5fss0_core0 | main_timer4 |
+-------------------+-------------+
| main_r5fss0_core1 | main_timer5 |
+-------------------+-------------+
| main_r5fss1_core0 | main_timer6 |
+-------------------+-------------+
| main_r5fss1_core1 | main_timer7 |
+-------------------+-------------+
| main_r5fss2_core0 | main_timer8 |
+-------------------+-------------+
| main_r5fss2_core1 | main_timer9 |
+-------------------+-------------+
| c71_0 | main_timer0 |
+-------------------+-------------+
| c71_1 | main_timer1 |
+-------------------+-------------+
| c71_2 | main_timer2 |
+-------------------+-------------+
| c71_3 | main_timer3 |
+-------------------+-------------+
Signed-off-by: Beleswar Padhi <b-padhi@ti.com>
Link: https://lore.kernel.org/r/20240826104821.1516344-8-b-padhi@ti.com
Signed-off-by: Nishanth Menon <nm@ti.com>
|
|
The remoteproc firmware like of R5F and DSPs in the MAIN voltage domain
use timers. Therefore, change the status of the timer nodes to
"reserved" to avoid any clash. Usage is described as below:
+===================+=============+
| Remoteproc node | Timer Node |
+===================+=============+
| main_r5fss0_core0 | main_timer4 |
+-------------------+-------------+
| main_r5fss0_core1 | main_timer5 |
+-------------------+-------------+
| main_r5fss1_core0 | main_timer6 |
+-------------------+-------------+
| main_r5fss1_core1 | main_timer7 |
+-------------------+-------------+
| main_r5fss2_core0 | main_timer8 |
+-------------------+-------------+
| main_r5fss2_core1 | main_timer9 |
+-------------------+-------------+
| c71_0 | main_timer0 |
+-------------------+-------------+
| c71_1 | main_timer1 |
+-------------------+-------------+
| c71_2 | main_timer2 |
+-------------------+-------------+
| c71_3 | main_timer3 |
+-------------------+-------------+
Signed-off-by: Beleswar Padhi <b-padhi@ti.com>
Link: https://lore.kernel.org/r/20240826104821.1516344-7-b-padhi@ti.com
Signed-off-by: Nishanth Menon <nm@ti.com>
|
|
The remoteproc firmware like of R5F and DSPs in the MAIN voltage domain
use timers. Therefore, change the status of the timer nodes to
"reserved" to avoid any clash. Usage is described as below:
+===================+=============+
| Remoteproc node | Timer Node |
+===================+=============+
| main_r5fss0_core0 | main_timer2 |
+-------------------+-------------+
| main_r5fss0_core1 | main_timer3 |
+-------------------+-------------+
| main_r5fss1_core0 | main_timer4 |
+-------------------+-------------+
| main_r5fss1_core1 | main_timer5 |
+-------------------+-------------+
| c71_0 | main_timer0 |
+-------------------+-------------+
| c71_1 | main_timer1 |
+-------------------+-------------+
Signed-off-by: Beleswar Padhi <b-padhi@ti.com>
Link: https://lore.kernel.org/r/20240826104821.1516344-6-b-padhi@ti.com
Signed-off-by: Nishanth Menon <nm@ti.com>
|
|
The remoteproc firmware like of R5F and DSPs in the MAIN voltage domain
use timers. Therefore, change the status of the timer nodes to
"reserved" to avoid any clash. Usage is described as below:
+===================+=============+
| Remoteproc node | Timer Node |
+===================+=============+
| main_r5fss0_core0 | main_timer2 |
+-------------------+-------------+
| main_r5fss0_core1 | main_timer3 |
+-------------------+-------------+
| main_r5fss1_core0 | main_timer4 |
+-------------------+-------------+
| main_r5fss1_core1 | main_timer5 |
+-------------------+-------------+
| c71_0 | main_timer0 |
+-------------------+-------------+
| c71_1 | main_timer1 |
+-------------------+-------------+
Signed-off-by: Beleswar Padhi <b-padhi@ti.com>
Link: https://lore.kernel.org/r/20240826104821.1516344-5-b-padhi@ti.com
Signed-off-by: Nishanth Menon <nm@ti.com>
|
|
The remoteproc firmware like of R5F and DSPs in the MAIN voltage domain
use timers. Therefore, change the status of the timer nodes to
"reserved" to avoid any clash. Usage is described as below:
+===================+==============+
| Remoteproc node | Timer Node |
+===================+==============+
| main_r5fss0_core0 | main_timer12 |
+-------------------+--------------+
| main_r5fss0_core1 | main_timer13 |
+-------------------+--------------+
| main_r5fss1_core0 | main_timer14 |
+-------------------+--------------+
| main_r5fss1_core1 | main_timer15 |
+-------------------+--------------+
| c66_0 | main_timer0 |
+-------------------+--------------+
| c66_1 | main_timer1 |
+-------------------+--------------+
| c71_0 | main_timer2 |
+-------------------+--------------+
Signed-off-by: Beleswar Padhi <b-padhi@ti.com>
Link: https://lore.kernel.org/r/20240826104821.1516344-4-b-padhi@ti.com
Signed-off-by: Nishanth Menon <nm@ti.com>
|
|
The remoteproc firmware like of R5F and DSPs in the MAIN voltage domain
use timers. Therefore, change the status of the timer nodes to
"reserved" to avoid any clash. Usage is described as below:
+===================+==============+
| Remoteproc node | Timer Node |
+===================+==============+
| main_r5fss0_core0 | main_timer12 |
+-------------------+--------------+
| main_r5fss0_core1 | main_timer13 |
+-------------------+--------------+
| main_r5fss1_core0 | main_timer14 |
+-------------------+--------------+
| main_r5fss1_core1 | main_timer15 |
+-------------------+--------------+
| c66_0 | main_timer0 |
+-------------------+--------------+
| c66_1 | main_timer1 |
+-------------------+--------------+
| c71_0 | main_timer2 |
+-------------------+--------------+
Signed-off-by: Beleswar Padhi <b-padhi@ti.com>
Link: https://lore.kernel.org/r/20240826104821.1516344-3-b-padhi@ti.com
Signed-off-by: Nishanth Menon <nm@ti.com>
|
|
The remoteproc firmware of R5F in the MAIN voltage domain use timers.
Therefore, change the status of the timer nodes to "reserved" to avoid
any clash. Usage is described as below:
+===================+==========================+
| Remoteproc node | Timer Node |
+===================+==========================+
| main_r5fss0_core0 | main_timer0, main_timer2 |
+-------------------+--------------------------+
| main_r5fss0_core1 | main_timer1 |
+-------------------+--------------------------+
Signed-off-by: Beleswar Padhi <b-padhi@ti.com>
Link: https://lore.kernel.org/r/20240826104821.1516344-2-b-padhi@ti.com
Signed-off-by: Nishanth Menon <nm@ti.com>
|
|
To allow firmware to pick up all DTs from here, move the overlays that
are normally applied during DT fixup to the kernel source as well. Hook
then into the build nevertheless to ensure that regular checks are
performed.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Link: https://lore.kernel.org/r/91f8b825467651ebd51a4051f153ab136eeb1849.1724830741.git.jan.kiszka@siemens.com
Signed-off-by: Nishanth Menon <nm@ti.com>
|
|
The PG1 A variant of the iot2050 series has been identified which
partially lacks support for lock-step mode. This implies that all
iot2050 boards can't support this mode. As a result, lock-step mode has
been disabled across all iot2050 boards for consistency and to avoid
potential issues.
Signed-off-by: Li Hua Qian <huaqian.li@siemens.com>
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Link: https://lore.kernel.org/r/d1f5f84db7a1597cd29628a0b503e578367b7b40.1724830741.git.jan.kiszka@siemens.com
Signed-off-by: Nishanth Menon <nm@ti.com>
|
|
The TI AM69 SK board has three R5F clusters in the MAIN domain, and all
of these are configured for LockStep mode at the moment. Switch all of
these R5F clusters to Split mode by default to maximize the number of
R5F cores.
Signed-off-by: Beleswar Padhi <b-padhi@ti.com>
Link: https://lore.kernel.org/r/20240826093024.1183540-8-b-padhi@ti.com
Signed-off-by: Nishanth Menon <nm@ti.com>
|
|
The TI J784S4 EVM board has three R5F clusters in the MAIN domain, and
all of these are configured for LockStep mode at the moment. Switch
all of these R5F clusters to Split mode by default to maximize the
number of R5F cores.
Signed-off-by: Beleswar Padhi <b-padhi@ti.com>
Link: https://lore.kernel.org/r/20240826093024.1183540-7-b-padhi@ti.com
Signed-off-by: Nishanth Menon <nm@ti.com>
|
|
The TI AM68 SK board has two R5F clusters in the MAIN domain, and both
of these are configured for LockStep mode at the moment. Switch both of
these R5F clusters to Split mode by default to maximize the number of
R5F cores.
Signed-off-by: Beleswar Padhi <b-padhi@ti.com>
Link: https://lore.kernel.org/r/20240826093024.1183540-6-b-padhi@ti.com
Signed-off-by: Nishanth Menon <nm@ti.com>
|
|
The TI J721S2 EVM board has two R5F clusters in the MAIN domain, and
both of these are configured for LockStep mode at the moment. Switch
both of these R5F clusters to Split mode by default to maximize the
number of R5F cores.
Signed-off-by: Beleswar Padhi <b-padhi@ti.com>
Link: https://lore.kernel.org/r/20240826093024.1183540-5-b-padhi@ti.com
Signed-off-by: Nishanth Menon <nm@ti.com>
|
|
The TI J721E SK board has two R5F clusters in the MAIN domain, and both
of these are configured for LockStep mode at the moment. Switch both of
these R5F clusters to Split mode by default to maximize the number of
R5F cores.
Signed-off-by: Beleswar Padhi <b-padhi@ti.com>
Link: https://lore.kernel.org/r/20240826093024.1183540-4-b-padhi@ti.com
Signed-off-by: Nishanth Menon <nm@ti.com>
|
|
The TI J721E EVM board has two R5F clusters in the MAIN domain, and
both of these are configured for LockStep mode at the moment. Switch
both of these R5F clusters to Split mode by default to maximize the
number of R5F cores.
Signed-off-by: Beleswar Padhi <b-padhi@ti.com>
Link: https://lore.kernel.org/r/20240826093024.1183540-3-b-padhi@ti.com
Signed-off-by: Nishanth Menon <nm@ti.com>
|
|
The TI J7200 EVM board has one R5F cluster in the MAIN domain, and it is
configured for LockStep mode at the moment. Switch the MAIN R5F cluster
to Split mode by default to maximize the number of R5F cores.
Signed-off-by: Beleswar Padhi <b-padhi@ti.com>
Link: https://lore.kernel.org/r/20240826093024.1183540-2-b-padhi@ti.com
Signed-off-by: Nishanth Menon <nm@ti.com>
|
|
External interfaces should be disabled at the SoC DTSI level, since
the node is incomplete. Disable Ethernet switch and ports in SoC DTSI
and enable them in the board DTS. If the board DTS includes a SoM DTSI
that completes the node description, enable the Ethernet switch and
ports in SoM DTSI.
Reflect this change in SoM DTSIs by removing ethernet port disable.
Signed-off-by: Logan Bristol <logan.bristol@utexas.edu>
Acked-by: Matthias Schiffer <matthias.schiffer@ew.tq-group.com>
Acked-by: Josua Mayer <josua@solid-run.com>
Link: https://lore.kernel.org/r/20240809135753.1186-1-logan.bristol@utexas.edu
Signed-off-by: Nishanth Menon <nm@ti.com>
|
|
assigned-clock sets DEV_RTIx_RTI_CLK(id:0) whereas clocks sets
DEV_RTIx_RTI_CLK_PARENT_GLUELOGIC_HFOSC0_CLKOUT(id:1)[1]. This does not
look right, the timers in the driver assume a max frequency of 32kHz for
the heartbeat (HFOSC0 is 19.2MHz on j784s4-evm).
With this change, WDIOC_GETTIMELEFT return coherent time left
(DEFAULT_HEARTBEAT=60, reports 60s upon opening the cdev).
[1] https://software-dl.ti.com/tisci/esd/latest/5_soc_doc/j784s4/clocks.html#clocks-for-rti0-device
Fixes: caae599de8c6 ("arm64: dts: ti: k3-j784s4-main: Add the main domain watchdog instances")
Suggested-by: Andrew Halaney <ahalaney@redhat.com>
Signed-off-by: Eric Chanudet <echanude@redhat.com>
Tested-by: Andrew Halaney <ahalaney@redhat.com>
Tested-by: Udit Kumar <u-kumar1@ti.com>
Link: https://lore.kernel.org/r/20240805174330.2132717-2-echanude@redhat.com
Signed-off-by: Nishanth Menon <nm@ti.com>
|
|
The DMA carveout for the C6x core 0 is at 0xa6000000 and core 1 is at
0xa7000000. These are reversed in DT. While both C6x can access either
region, so this is not normally a problem, but if we start restricting
the memory each core can access (such as with firewalls) the cores
accessing the regions for the wrong core will not work. Fix this here.
Fixes: fae14a1cb8dd ("arm64: dts: ti: Add k3-j721e-beagleboneai64")
Signed-off-by: Andrew Davis <afd@ti.com>
Link: https://lore.kernel.org/r/20240801181232.55027-2-afd@ti.com
Signed-off-by: Nishanth Menon <nm@ti.com>
|
|
The DMA carveout for the C6x core 0 is at 0xa6000000 and core 1 is at
0xa7000000. These are reversed in DT. While both C6x can access either
region, so this is not normally a problem, but if we start restricting
the memory each core can access (such as with firewalls) the cores
accessing the regions for the wrong core will not work. Fix this here.
Fixes: f46d16cf5b43 ("arm64: dts: ti: k3-j721e-sk: Add DDR carveout memory nodes")
Signed-off-by: Andrew Davis <afd@ti.com>
Link: https://lore.kernel.org/r/20240801181232.55027-1-afd@ti.com
Signed-off-by: Nishanth Menon <nm@ti.com>
|
|
The resolves
k3-am642-evm.dtb: adc: 'ti,adc-channels' is a required property
from schema $id: http://devicetree.org/schemas/iio/adc/ti,am3359-adc.yaml#
As the adc is reserved, thus not used by Linux, this has no practical
impact.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Link: https://lore.kernel.org/r/c16521bd55ebed8d1625f11c2ed6fd2c45e8baa5.1723653439.git.jan.kiszka@siemens.com
Signed-off-by: Nishanth Menon <nm@ti.com>
|
|
There are two MCAN instances present on the am65x SoC [0].
Since there are two CAN transceivers on the IDK application
board for AM654 EVM [1], enable m_can0 and m_can1, add the
two corresponding CAN transceiver nodes, and set a maximum
data rate of 5 Mbps.
[0] https://www.ti.com/lit/ds/symlink/am6548.pdf
[1] https://www.ti.com/lit/zip/sprr382
Signed-off-by: Faiz Abbas <faiz_abbas@ti.com>
Signed-off-by: Judith Mendez <jm@ti.com>
Link: https://lore.kernel.org/r/20240821205414.1706661-1-jm@ti.com
Signed-off-by: Nishanth Menon <nm@ti.com>
|
|
The SerDes control nodes contain both a clock and clock mux, this is
a simple MFD. Add this to the compatible string list.
Reported-by: Jan Kiszka <jan.kiszka@siemens.com>
Closes: https://lore.kernel.org/linux-arm-kernel/cover.1723653439.git.jan.kiszka@siemens.com/
Fixes: da795dc4f2a0 ("arm64: dts: ti: k3-am65: Move SerDes mux nodes under the control node")
Signed-off-by: Andrew Davis <afd@ti.com>
Tested-by: Jan Kiszka <jan.kiszka@siemens.com>
Link: https://lore.kernel.org/r/20240821162337.33774-2-afd@ti.com
Signed-off-by: Nishanth Menon <nm@ti.com>
|
|
This node contains a child which is only probed if simple-mfd is in the
compatible list. Add this here.
Signed-off-by: Andrew Davis <afd@ti.com>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://lore.kernel.org/r/20240821162337.33774-1-afd@ti.com
Signed-off-by: Nishanth Menon <nm@ti.com>
|
|
The phyBOARD-Electra implements two Ethernet ports utilizing PRUs.
Add configuration for both mac ports & PHYs.
Signed-off-by: Wadim Egorov <w.egorov@phytec.de>
Link: https://lore.kernel.org/r/20240815113212.3720403-1-w.egorov@phytec.de
Signed-off-by: Nishanth Menon <nm@ti.com>
|
|
Enable throttling down the CPU frequency when an alert temperature
threshold (lower than the critical threshold) is reached.
Signed-off-by: Alessandro Zini <alessandro.zini@siemens.com>
Link: https://lore.kernel.org/r/20240814214328.14155-1-alessandro.zini@siemens.com
Signed-off-by: Nishanth Menon <nm@ti.com>
|
|
Commit ed07d82f9e3e8 ("arm64: dts: ti: k3-am62p-j722s: Move
SoC-specific node properties") introduced the main_gpio1 node
and included the ti,ngpio property, but did not include the
gpio-reserved-ranges property. As a result, the user could try
to access gpios that do not exist. Fix this by introducing the
gpio-reserved-ranges property.
The non-existent gpios are found in the am67x datasheet [1] in Table
5-27.
Depends on patch: dt-bindings: gpio: gpio-davinci: Add the
gpio-reserved-ranges property [2]
[1] https://www.ti.com/lit/ds/symlink/am67.pdf
[2] https://lore.kernel.org/all/20240809154638.394091-2-j-mcarthur@ti.com/
Signed-off-by: Jared McArthur <j-mcarthur@ti.com>
Link: https://lore.kernel.org/r/20240809162828.1945821-3-j-mcarthur@ti.com
Signed-off-by: Nishanth Menon <nm@ti.com>
|
|
Commit 29075cc09f43 ("arm64: dts: ti: Introduce AM62P5 family of
SoCs") introduced the main_gpio1 node and included the ti,ngpio
property, but did not include the gpio-reserved-ranges property. As a
result, the user could try to access gpios that do not exist. Fix this
by introducing the gpio-reserved-ranges property.
The non-existent gpios are found in the am62p datasheet [1] in Table
5-24.
Depends on patch: dt-bindings: gpio: gpio-davinci: Add the
gpio-reserved-ranges property [2]
[1] https://www.ti.com/lit/ds/symlink/am62p.pdf
[2] https://lore.kernel.org/all/20240809154638.394091-2-j-mcarthur@ti.com/
Signed-off-by: Jared McArthur <j-mcarthur@ti.com>
Link: https://lore.kernel.org/r/20240809162828.1945821-2-j-mcarthur@ti.com
Signed-off-by: Nishanth Menon <nm@ti.com>
|
|
mmc1 is not functional and needs clock loopback so that it can
create sampling clock from this for high speed SDIO operations.
Thus, add clklb pin mux to get mmc1 working.
Fixes: a266c180b398 ("arm64: dts: ti: k3-am68-sk: Add support for AM68 SK base board")
Signed-off-by: Bhavya Kapoor <b-kapoor@ti.com>
Reviewed-by: Neha Malcom Francis <n-francis@ti.com>
Reviewed-by: Manorit Chawdhry <m-chawdhry@ti.com>
Link: https://lore.kernel.org/r/20240809072231.2931206-1-b-kapoor@ti.com
Signed-off-by: Nishanth Menon <nm@ti.com>
|
|
Add PRU Ethernet controller and PHY nodes, as it was previously done for
the AM64x EVM Device Trees.
Signed-off-by: Matthias Schiffer <matthias.schiffer@ew.tq-group.com>
Link: https://lore.kernel.org/r/20240807121922.3180213-1-matthias.schiffer@ew.tq-group.com
Signed-off-by: Nishanth Menon <nm@ti.com>
|
|
The PCIe0 instance of the PCIe controller on J784S4 SoC supports up to 4
lanes. Additionally, all 4 lanes of PCIe0 can be utilized on J784S4-EVM
via SERDES1. Since SERDES1 is not being used by any peripheral apart
from PCIe0, use all 4 lanes of SERDES1 for PCIe0.
Fixes: 27ce26fe52d4 ("arm64: dts: ti: k3-j784s4-evm: Enable PCIe0 and PCIe1 in RC Mode")
Signed-off-by: Siddharth Vadapalli <s-vadapalli@ti.com>
Link: https://lore.kernel.org/r/20240720110455.3043327-1-s-vadapalli@ti.com
Signed-off-by: Nishanth Menon <nm@ti.com>
|
|
There are 2 mux-controller nodes in J7200 which are responsible for
transferring can signals to the can phy but same node names for both
the mux-controllers led to errors while setting up both mux-controllers
for can phys simultaneously.
Thus, update node names for these mux-controller.
Fixes: da23e8d1124b ("arm64: dts: ti: k3-j7200-som-p0: Add support for CAN instance 0 in main domain")
Signed-off-by: Bhavya Kapoor <b-kapoor@ti.com>
Reviewed-by: Judith Mendez <jm@ti.com>
Link: https://lore.kernel.org/r/20240729063411.1570930-3-b-kapoor@ti.com
Signed-off-by: Nishanth Menon <nm@ti.com>
|
|
There are 2 mux-controller nodes in J721S2 which are responsible for
transferring can signals to the can phy but same node names for both
the mux-controllers led to errors while setting up both mux-controllers
for can phys simultaneously.
Thus, update node names for these mux-controller.
Fixes: 98f3b667e1de ("arm64: dts: ti: k3-j721s2: Add support for CAN instances 3 and 5 in main domain")
Signed-off-by: Bhavya Kapoor <b-kapoor@ti.com>
Link: https://lore.kernel.org/r/20240729063411.1570930-2-b-kapoor@ti.com
Signed-off-by: Nishanth Menon <nm@ti.com>
|
|
Correct the McASP nodes - mcasp3 and mcasp4 with the right
DMAs thread IDs as per TISCI documentation [1] for J784s4.
This fixes the related McASPs probe failure due to incorrect
DMA IDs.
Link: http://downloads.ti.com/tisci/esd/latest/5_soc_doc/j784s4/psil_cfg.html#psi-l-source-and-destination-thread-ids/ [1]
Fixes: 5095ec4aa1ea ("arm64: dts: ti: k3-j784s4-main: Add McASP nodes")
Signed-off-by: Parth Pancholi <parth.pancholi@toradex.com>
Reviewed-by: Jayesh Choudhary <j-choudhary@ti.com>
Link: https://lore.kernel.org/r/20240730093754.1659782-1-parth105105@gmail.com
Signed-off-by: Nishanth Menon <nm@ti.com>
|
|
Commit 5e5c50964e2e ("arm64: dts: ti: k3-j722s: Add gpio-ranges
properties") introduced pinmux range definition for gpio-ranges, however
missed a hole within gpio-range for main_pmx0. As a result, automatic
mapping of GPIO to pin control for gpios within the main_pmx0 domain is
broken. Fix this by correcting the gpio-range.
Fixes: 5e5c50964e2e ("arm64: dts: ti: k3-j722s: Add gpio-ranges properties")
Signed-off-by: Jared McArthur <j-mcarthur@ti.com>
Link: https://lore.kernel.org/r/20240801210414.715306-4-j-mcarthur@ti.com
Signed-off-by: Nishanth Menon <nm@ti.com>
|
|
Commit d72d73a44c3c ("arm64: dts: ti: k3-am62p: Add gpio-ranges
properties") introduced pinmux range definition for gpio-ranges, however
missed a hole within gpio-range for main_pmx0. As a result, automatic
mapping of GPIO to pin control for gpios within the main_pmx0 domain is
broken. Fix this by correcting the gpio-range.
Fixes: d72d73a44c3c ("arm64: dts: ti: k3-am62p: Add gpio-ranges properties")
Signed-off-by: Jared McArthur <j-mcarthur@ti.com>
Link: https://lore.kernel.org/r/20240801210414.715306-3-j-mcarthur@ti.com
Signed-off-by: Nishanth Menon <nm@ti.com>
|
|
Commit d72d73a44c3c ("arm64: dts: ti: k3-am62p: Add gpio-ranges
properties") introduced pinmux range definition for gpio-ranges, however
missed introducing the range description for the mcu_gpio node. As a
result, automatic mapping of GPIO to pin control for mcu gpios is
broken. Fix this by introducing the proper ranges.
Fixes: d72d73a44c3c ("arm64: dts: ti: k3-am62p: Add gpio-ranges properties")
Signed-off-by: Jared McArthur <j-mcarthur@ti.com>
Link: https://lore.kernel.org/r/20240801210414.715306-2-j-mcarthur@ti.com
Signed-off-by: Nishanth Menon <nm@ti.com>
|
|
This reverts commit 3935fbc87ddebea5439f3ab6a78b1e83e976bf88.
CTRL_SLEEP_MOCI# is a signal that is defined for all the SoM
implementing the Verdin family specification, this signal is supposed to
control the power enable in the carrier board when the system is in deep
sleep mode. However this is not possible with Texas Instruments AM62
SoC, IOs output buffer is disabled in deep sleep and IOs are in
tri-state mode.
Given that we cannot properly control this pin, force it to be always
high to minimize potential issues.
Fixes: 3935fbc87dde ("arm64: dts: ti: k3-am62-verdin-dahlia: support sleep-moci")
Cc: <stable@vger.kernel.org>
Link: https://e2e.ti.com/support/processors-group/processors/f/processors-forum/1361669/am625-gpio-output-state-in-deep-sleep/5244802
Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
Link: https://lore.kernel.org/r/20240731054804.6061-1-francesco@dolcini.it
Signed-off-by: Nishanth Menon <nm@ti.com>
|
|
Late fixes towards v6.11-rc1
First patch fixes warning splat seen on J784S4 due to overlapping
serdes0 lane. Second patch cleans up the serdes0 references for readability
Signed-off-by: Nishanth Menon <nm@ti.com>
|
|
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
Pull Kbuild fixes from Masahiro Yamada:
- Fix RPM package build error caused by an incorrect locale setup
- Mark modules.weakdep as ghost in RPM package
- Fix the odd combination of -S and -c in stack protector scripts,
which is an error with the latest Clang
* tag 'kbuild-fixes-v6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
kbuild: Fix '-S -c' in x86 stack protector scripts
kbuild: rpm-pkg: ghost modules.weakdep file
kbuild: rpm-pkg: Fix C locale setup
|
|
This simplifies the min_t() and max_t() macros by no longer making them
work in the context of a C constant expression.
That means that you can no longer use them for static initializers or
for array sizes in type definitions, but there were only a couple of
such uses, and all of them were converted (famous last words) to use
MIN_T/MAX_T instead.
Cc: David Laight <David.Laight@aculab.com>
Cc: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
