diff options
| author | Bhavya Kapoor <b-kapoor@ti.com> | 2024-08-27 13:56:43 +0300 |
|---|---|---|
| committer | Nishanth Menon <nm@ti.com> | 2024-08-28 20:31:41 +0300 |
| commit | 46ca5c7207703b36025228a6b7a29198a1539d10 (patch) | |
| tree | b87abb5d887f3959e9f5a9177f1a153643dcc132 | |
| parent | 010b035ab4d7a1c4fd13936f42eef857ddbeede7 (diff) | |
| download | linux-46ca5c7207703b36025228a6b7a29198a1539d10.tar.xz | |
arm64: dts: ti: k3-j722s-evm: Add support for multiple CAN instances
CAN instances 0 and 1 in the mcu domain and 0 in the main domain are
brought on the evm through headers J5, J8 and J10 respectively. Thus,
add their respective transceiver's 0, 1 and 2 dt nodes as well as
add the required pinmux to add support for these CAN instances.
Signed-off-by: Bhavya Kapoor <b-kapoor@ti.com>
Reviewed-by: Judith Mendez <jm@ti.com>
Link: https://lore.kernel.org/r/20240827105644.575862-2-b-kapoor@ti.com
Signed-off-by: Nishanth Menon <nm@ti.com>
| -rw-r--r-- | arch/arm64/boot/dts/ti/k3-j722s-evm.dts | 74 |
1 files changed, 74 insertions, 0 deletions
diff --git a/arch/arm64/boot/dts/ti/k3-j722s-evm.dts b/arch/arm64/boot/dts/ti/k3-j722s-evm.dts index ee2bd7d26b9e..41c36f82a3c5 100644 --- a/arch/arm64/boot/dts/ti/k3-j722s-evm.dts +++ b/arch/arm64/boot/dts/ti/k3-j722s-evm.dts @@ -163,10 +163,39 @@ clocks = <&audio_refclk1>; }; }; + + transceiver0: can-phy0 { + compatible = "ti,tcan1042"; + #phy-cells = <0>; + max-bitrate = <5000000>; + pinctrl-names = "default"; + pinctrl-0 = <&mcu_mcan0_gpio_pins_default>; + standby-gpios = <&mcu_gpio0 12 GPIO_ACTIVE_HIGH>; + }; + + transceiver1: can-phy1 { + compatible = "ti,tcan1042"; + #phy-cells = <0>; + max-bitrate = <5000000>; + }; + + transceiver2: can-phy2 { + compatible = "ti,tcan1042"; + #phy-cells = <0>; + max-bitrate = <5000000>; + standby-gpios = <&exp1 17 GPIO_ACTIVE_HIGH>; + }; }; &main_pmx0 { + main_mcan0_pins_default: main-mcan0-default-pins { + pinctrl-single,pins = < + J722S_IOPAD(0x1dc, PIN_INPUT, 0) /* (C22) MCAN0_RX */ + J722S_IOPAD(0x1d8, PIN_OUTPUT, 0) /*(D22) MCAN0_TX */ + >; + }; + main_i2c0_pins_default: main-i2c0-default-pins { pinctrl-single,pins = < J722S_IOPAD(0x01e0, PIN_INPUT_PULLUP, 0) /* (D23) I2C0_SCL */ @@ -318,6 +347,26 @@ &mcu_pmx0 { + mcu_mcan0_pins_default: mcu-mcan0-default-pins { + pinctrl-single,pins = < + J722S_MCU_IOPAD(0x038, PIN_INPUT, 0) /* (D8) MCU_MCAN0_RX */ + J722S_MCU_IOPAD(0x034, PIN_OUTPUT, 0) /* (B2) MCU_MCAN0_TX */ + >; + }; + + mcu_mcan1_pins_default: mcu-mcan1-default-pins { + pinctrl-single,pins = < + J722S_MCU_IOPAD(0x040, PIN_INPUT, 0) /* (B1) MCU_MCAN1_RX */ + J722S_MCU_IOPAD(0x03C, PIN_OUTPUT, 0) /*(C1) MCU_MCAN1_TX */ + >; + }; + + mcu_mcan0_gpio_pins_default: mcu-mcan0-gpio-default-pins { + pinctrl-single,pins = < + J722S_MCU_IOPAD(0x0030, PIN_OUTPUT, 7) /* (C3) MCU_GPIO0_12 */ + >; + }; + wkup_uart0_pins_default: wkup-uart0-default-pins { pinctrl-single,pins = < J722S_MCU_IOPAD(0x02c, PIN_INPUT, 0) /* (C7) WKUP_UART0_CTSn */ @@ -581,3 +630,28 @@ 0 0 0 0 >; }; + +&mcu_mcan0 { + pinctrl-names = "default"; + pinctrl-0 = <&mcu_mcan0_pins_default>; + phys = <&transceiver0>; + status = "okay"; +}; + +&mcu_mcan1 { + pinctrl-names = "default"; + pinctrl-0 = <&mcu_mcan1_pins_default>; + phys = <&transceiver1>; + status = "okay"; +}; + +&main_mcan0 { + pinctrl-names = "default"; + pinctrl-0 = <&main_mcan0_pins_default>; + phys = <&transceiver2>; + status = "okay"; +}; + +&mcu_gpio0 { + status = "okay"; +}; |