summaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2020-11-30arm64: dts: qcom: sc7180: Add lpass cpu node for I2S driverAjit Pandey1-0/+69
Add the I2S controller node to sc7180 dtsi. Add pinmux for primary and secondary I2S. Reviewed-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Signed-off-by: Ajit Pandey <ajitp@codeaurora.org> Signed-off-by: Cheng-Yi Chiang <cychiang@chromium.org> Signed-off-by: V Sujith Kumar Reddy <vsujithk@codeaurora.org> Signed-off-by: Srinivasa Rao Mandadapu <srivasam@codeaurora.org> Link: https://lore.kernel.org/r/1600450426-14063-1-git-send-email-srivasam@codeaurora.org Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2020-11-30arm64: dts: sdm845: Add interconnect properties for QUPGeorgi Djakov1-0/+160
Add the interconnects DT property to describe the ports for GENI QUPs on the sdm845 platform. Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org> Link: https://lore.kernel.org/r/20201105135211.7160-3-georgi.djakov@linaro.org Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2020-11-30interconnect: qcom: sdm845: Add the missing nodes for QUPGeorgi Djakov1-0/+3
The QUP nodes are currently defined just as entries in the topology, but they are not referenced by any of the NoCs. Let's fix this and "attach" them to their NoCs, so that the QUP drivers are able to use them as path endpoints and scale their bandwidth. This is based on the information from the downstream msm-4.9 kernel. Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org> Link: https://lore.kernel.org/r/20201105135211.7160-2-georgi.djakov@linaro.org Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2020-11-30dt-bindings: interconnect: sdm845: Add IDs for the QUP portsGeorgi Djakov1-0/+2
The QUP ports exist in the topology, but are not exposed as an endpoints in DT. Fix this by creating IDs and attach them to their NoCs, so that the various QUP drivers (i2c/spi/uart etc.) are able to request their interconnect paths and scale their bandwidth. Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org> Link: https://lore.kernel.org/r/20201105135211.7160-1-georgi.djakov@linaro.org Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2020-11-30arm64: dts: qcom: c630: Expose LID eventsBjorn Andersson1-0/+39
The LID state can be read from GPIO 124 and the "tablet mode" from GPIO 95, expose these to the system using gpio-keys and mark the falling edge of the LID state as a wakeup-source - to wake the system from suspend. Tested-by: Steev Klimaszewski <steev@kali.org> Acked-by: Shawn Guo <shawn.guo@linaro.org> Link: https://lore.kernel.org/r/20201125060838.165576-1-bjorn.andersson@linaro.org Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2020-11-30arm64: dts: qcom: c630: Re-enable apps_smmuBjorn Andersson1-5/+0
Re-enable the apps_smmu now that the arm-smmu driver supports stream mapping handoff from firmware. Tested-by: Steev Klimaszewski <steev@kali.org> Acked-by: Shawn Guo <shawn.guo@linaro.org> Link: https://lore.kernel.org/r/20201124184414.380796-1-bjorn.andersson@linaro.org Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2020-11-30dts: qcom: sdm845: Add dt entries to support crypto engine.Thara Gopinath1-0/+30
Add crypto engine (CE) and CE BAM related nodes and definitions to "sdm845.dtsi". Signed-off-by: Thara Gopinath <thara.gopinath@linaro.org> Link: https://lore.kernel.org/r/20201119155233.3974286-6-thara.gopinath@linaro.org [bjorn: Replaced RPMH_CE_CLK constant, for now] Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2020-11-29arm64: dts: qcom: qrb5165-rb5: Add support for MCP2518FDManivannan Sadhasivam1-0/+17
Add support for onboard MCP2518FD SPI CAN transceiver attached to SPI0 of RB5. Tested-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Link: https://lore.kernel.org/r/20201127173044.55144-1-manivannan.sadhasivam@linaro.org Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2020-11-26arm64: dts: qcom: sdm845: use GIC_SPI for IPA interruptsAlex Elder1-2/+2
Use GIC_SPI rather than 0 in the specifiers for the two ARM GIC interrupts used by IPA. Signed-off-by: Alex Elder <elder@linaro.org> Link: https://lore.kernel.org/r/20201126015457.6557-4-elder@linaro.org Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2020-11-26arm64: dts: qcom: sc7180: use GIC_SPI for IPA interruptsAlex Elder1-2/+2
Use GIC_SPI rather than 0 in the specifiers for the two ARM GIC interrupts used by IPA. Signed-off-by: Alex Elder <elder@linaro.org> Link: https://lore.kernel.org/r/20201126015457.6557-3-elder@linaro.org Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2020-11-26arm64: dts: qcom: sc7180: limit IPA iommu streamsAlex Elder1-1/+2
Recently we learned that Android and Windows firmware don't seem to like using 3 as an iommu mask value for IPA. A simple fix was to specify exactly the streams needed explicitly, rather than implying a range with the mask. Make the same change for the SC7180 platform. See also: https://lore.kernel.org/linux-arm-msm/20201123052305.157686-1-bjorn.andersson@linaro.org/ Fixes: d82fade846aa8 ("arm64: dts: qcom: sc7180: add IPA information") Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Alex Elder <elder@linaro.org> Link: https://lore.kernel.org/r/20201126015457.6557-2-elder@linaro.org Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2020-11-26arm64: dts: qcom: sm8150: Add Coresight supportSai Prakash Ranjan1-0/+591
Add coresight components found on Qualcomm Technologies, Inc. SM8150 SoC. Signed-off-by: Sai Prakash Ranjan <saiprakash.ranjan@codeaurora.org> Reviewed-by: Mathieu Poirier <mathieu.poirier@linaro.org> Link: https://lore.kernel.org/r/20201126052422.24869-1-saiprakash.ranjan@codeaurora.org Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2020-11-26arm64: dts: qcom: sc7180-trogdor: Make pp3300_a the default supply for ↵Matthias Kaehlcke4-3/+64
pp3300_hub The trogdor design has two options for supplying the 'pp3300_hub' power rail, it can be supplied by 'pp3300_l7c' or 'pp3300_a'. The 'pp3300_a' path includes a load switch that can be controlled through GPIO84. Initially trogdor boards used 'pp3300_l7c' to power the USB hub, newer revisions (will) use 'pp3300_a' as supply for 'pp3300_hub'. Add a DT node for the 'pp3300_a' path and a pinctrl entry for the GPIO. Make this path the default and keep trogdor rev1, lazor rev0 and rev1 on 'pp3300_l7c'. These earlier revisions also allocated the GPIO to the purpose of controlling the power switch, so there is no need to limit the pinctrl config to newer revisions. Remove the platform-wide 'always/boot-on' properties from 'pp3300_l7c' and add them to the boards that use this supply. Also delete the 'always/boot-on' properties of 'pp3300_hub' for these boards. Signed-off-by: Matthias Kaehlcke <mka@chromium.org> Reviewed-by: Douglas Anderson <dianders@chromium.org> Link: https://lore.kernel.org/r/20201124164714.v4.1.I0ed4abdd2b2916fbedf76be254bc3457fb8b9655@changeid Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2020-11-25arm64: dts: qcom: sc7180: Add DDR/L3 votes for the pro variantSibi Sankar1-0/+5
Add DDR/L3 bandwidth votes for the pro variant of SC7180 SoC, as it support frequencies upto 2.5 GHz. Reviewed-by: Douglas Anderson <dianders@chromium.org> Signed-off-by: Sibi Sankar <sibis@codeaurora.org> Link: https://lore.kernel.org/r/1606198876-3515-2-git-send-email-sibis@codeaurora.org Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2020-11-25arm64: dts: qcom: sc7180-lite: Tweak DDR/L3 scaling on SC7180-liteSibi Sankar1-0/+18
Tweak the DDR/L3 bandwidth votes on the lite variant of the SC7180 SoC since the gold cores only support frequencies upto 2.1 GHz. Reviewed-by: Douglas Anderson <dianders@chromium.org> Signed-off-by: Sibi Sankar <sibis@codeaurora.org> Link: https://lore.kernel.org/r/1606198876-3515-1-git-send-email-sibis@codeaurora.org Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2020-11-25arm64: dts: qcom: sc7180-trogdor: add "pen-insert" label for trogdorTerry Hsiao1-1/+1
Add a label to the "pen-insert" node in sc7180-trogdor.dtsi Reviewed-by: Douglas Anderson <dianders@chromium.org> Signed-off-by: Terry Hsiao <terry_hsiao@compal.corp-partner.google.com> Link: https://lore.kernel.org/r/20201116083014.547-1-terry_hsiao@compal.corp-partner.google.com Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2020-11-25arm64: qcom: sc7180: trogdor: Add ADC nodes and thermal zone for charger ↵Antony Wang1-0/+36
thermistor Trogdor has a thermistor to monitor the temperature of the charger IC. Add the ADC (monitor) nodes and a thermal zone for this thermistor. Signed-off-by: Antony Wang <antony_wang@compal.corp-partner.google.com> [mka: tweaked commit message] Signed-off-by: Matthias Kaehlcke <mka@chromium.org> Link: https://lore.kernel.org/r/20201030084840.1.If389f211a8532b83095ff8c66ec181424440f8d6@changeid Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2020-11-25arm64: dts: qcom: pm6150x: add ADC_TM definitionsJishnu Prakash2-0/+34
Add ADC_TM peripheral definitions for PM6150 and PM6150L. Add ADC peripheral definition for PM6150l, which is needed for ADC_TM. Signed-off-by: Jishnu Prakash <jprakash@codeaurora.org> Link: https://lore.kernel.org/r/1602160825-10414-2-git-send-email-jprakash@codeaurora.org Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2020-11-24arm64: dts: qcom: sdm845: Limit ipa iommu streamsBjorn Andersson1-1/+2
The Android and Windows firmware does not accept the use of 3 as a mask to cover the IPA streams. But with 0x721 being related to WiFi and 0x723 being unsed the mapping can be reduced to just cover 0x720 and 0x722, which is accepted. Acked-by: Alex Elder <elder@linaro.org> Tested-by: Alex Elder <elder@linaro.org> Fixes: e9e89c45bfeb ("arm64: dts: sdm845: add IPA iommus property") Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20201123052305.157686-1-bjorn.andersson@linaro.org Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2020-11-24arm64: dts: qcom: fix indentation error in sm8250 cpu nodesJonathan Marek1-17/+17
Use tabs instead of 6 spaces. Signed-off-by: Jonathan Marek <jonathan@marek.ca> Link: https://lore.kernel.org/r/20201123144016.19596-1-jonathan@marek.ca Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2020-11-24arm64: dts: qcom: sm8150-mtp: Enable WiFi nodeJonathan Marek1-0/+9
Enable the WiFi node and specify its supply regulators. Reviewed-by: Vinod Koul <vkoul@kernel.org> Signed-off-by: Jonathan Marek <jonathan@marek.ca> [bjorn: Extracted patch from larger HDK patch] Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20201121055808.582401-2-bjorn.andersson@linaro.org Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2020-11-24arm64: dts: qcom: sm8150: Add wifi nodeJonathan Marek1-0/+23
Add a node for the WCN3990 WiFi module. Reviewed-by: Vinod Koul <vkoul@kernel.org> Signed-off-by: Jonathan Marek <jonathan@marek.ca> [bjorn: Extracted patch from larger "misc" patch, added qdss clock] Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20201121055808.582401-1-bjorn.andersson@linaro.org Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2020-11-24arm64: dts: qcom: sm8150-mtp: Specify remoteproc firmwareBjorn Andersson1-0/+8
Point the various remoteprocs of SM8150 MTP to a place with the platform specific firmware. Reviewed-by: Vinod Koul <vkoul@kernel.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20201121055603.582281-1-bjorn.andersson@linaro.org Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2020-11-24arm64: dts: sdm845: Add iommus property to qupStephen Boyd2-0/+4
The SMMU that sits in front of the QUP needs to be programmed properly so that the i2c geni driver can allocate DMA descriptors. Failure to do this leads to faults when using devices such as an i2c touchscreen where the transaction is larger than 32 bytes and we use a DMA buffer. arm-smmu 15000000.iommu: Unexpected global fault, this could be serious arm-smmu 15000000.iommu: GFSR 0x00000002, GFSYNR0 0x00000002, GFSYNR1 0x000006c0, GFSYNR2 0x00000000 Add the right SID and mask so this works. Reviewed-by: Vinod Koul <vkoul@kernel.org> Tested-by: Caleb Connolly <caleb@connolly.tech> Tested-by: Vinod Koul <vkoul@kernel.org> Signed-off-by: Stephen Boyd <swboyd@chromium.org> [bjorn: Define for second QUP as well, be more specific in sdm845.dtsi] Link: https://lore.kernel.org/r/20201122034149.626045-1-bjorn.andersson@linaro.org Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2020-11-24arm64: dts: qcom: sort sm8150 usb_2 nodeJonathan Marek1-7/+7
Fix an error introduced resolving conflicts with camnoc_virt node. Fixes: 0c9dde0d2015 ("arm64: dts: qcom: sm8150: Add secondary USB and PHY nodes") Signed-off-by: Jonathan Marek <jonathan@marek.ca> Link: https://lore.kernel.org/r/20201124041003.3600-1-jonathan@marek.ca Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2020-11-24arm64: dts: qcom: fix serial output for sm8250-hdkJonathan Marek1-2/+2
The uart2 node has been renamed, apply the change to sm8250-hdk dts too so that serial output works. Fixes: 91ed0e90fc49 ("arm64: dts: qcom: add sm8250 hdk dts") Signed-off-by: Jonathan Marek <jonathan@marek.ca> Link: https://lore.kernel.org/r/20201123143538.14198-1-jonathan@marek.ca Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2020-11-23arm64: dts: qcom: sc7180: Set 'polling-delay-passive' for thermal zones back ↵Matthias Kaehlcke1-25/+25
to 250 ms Commit 22337b91022d ("arm64: dts: qcom: sc7180: Changed polling mode in Thermal-zones node") sets both 'polling-delay' and 'polling-delay-passive' to zero with the rationale that TSENS interrupts are enabled. A TSENS interrupt fires when the temperature of a thermal zone reaches a trip point, which makes regular polling below the passive trip point temperature unnecessary. However the situation is different when passive cooling is active, regular polling is still needed to trigger a periodic evaluation of the thermal zone by the thermal governor. Change 'polling-delay-passive' back to the original value of 250 ms. Commit 2315ae70af95 ("arm64: dts: qcom: sc7180: Add gpu cooling support") recently changed the value for the GPU thermal zones from zero to 100 ms, also set it to 250 ms for uniformity. If some zones really need different values these can be changed in dedicated patches. Reviewed-by: Douglas Anderson <dianders@chromium.org> Fixes: 22337b91022d ("arm64: dts: qcom: sc7180: Changed polling mode in Thermal-zones node") Signed-off-by: Matthias Kaehlcke <mka@chromium.org> Link: https://lore.kernel.org/r/20201111120334.1.Ifc04ea235c3c370e3b21ec3b4d5dead83cc403b4@changeid Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2020-11-23arm64: dts: qcom: msm8916-samsung-a2015: Disable muic i2c pin biasNikita Travkin1-0/+11
Some versions of the firmware leave i2c gpios in a wrong state. Add pinctrl that disables pin bias since external pull-up resistors are present. Reviewed-by: Stephan Gerhold <stephan@gerhold.net> Fixes: 1329c1ab0730 ("arm64: dts: qcom: Add device tree for Samsung Galaxy A3U/A5U") Signed-off-by: Nikita Travkin <nikitos.tr@gmail.com> Link: https://lore.kernel.org/r/20201113175917.189123-6-nikitos.tr@gmail.com Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2020-11-23arm64: dts: qcom: msm8916-longcheer-l8150: Add notification LEDNikita Travkin1-0/+34
L8150 uses aw2013 LED contriller for notification LED on the front of the device. Add it to the device tree Reviewed-by: Stephan Gerhold <stephan@gerhold.net> Signed-off-by: Nikita Travkin <nikitos.tr@gmail.com> Link: https://lore.kernel.org/r/20201113175917.189123-5-nikitos.tr@gmail.com Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2020-11-23arm64: dts: qcom: msm8916-longcheer-l8150: Add flash LEDNikita Travkin1-0/+24
L8150 uses SGM3785 Flash LED driver. It is similar to SGM3140 but can also be controlled with PWM. Since SoC doesn't have PWM, add led to the device tree using sgm3140 driver. Reviewed-by: Stephan Gerhold <stephan@gerhold.net> Signed-off-by: Nikita Travkin <nikitos.tr@gmail.com> Link: https://lore.kernel.org/r/20201113175917.189123-4-nikitos.tr@gmail.com Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2020-11-23arm64: dts: msm8916-longcheer-l8150: Add position sensorsNikita Travkin1-0/+46
L8150 has: - BMC156 accelerometer and magnetic sensor - BMG160 gyroscope sensor Add them to the device tree. Reviewed-by: Stephan Gerhold <stephan@gerhold.net> Signed-off-by: Nikita Travkin <nikitos.tr@gmail.com> Link: https://lore.kernel.org/r/20201113175917.189123-3-nikitos.tr@gmail.com Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2020-11-23arm64: dts: msm8916-longcheer-l8150: Add touchscreenNikita Travkin1-0/+63
L8150 has RMI4 compatible Synaptics touchscreen on blsp_i2c5. It is powered by fixed regulator. Add both to the device tree. Reviewed-by: Stephan Gerhold <stephan@gerhold.net> Signed-off-by: Nikita Travkin <nikitos.tr@gmail.com> Link: https://lore.kernel.org/r/20201113175917.189123-2-nikitos.tr@gmail.com Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2020-11-23arm64: dts: qcom: msm8916-longcheer-l8150: Enable PM8916 vibratorNikita Travkin1-0/+4
L8150 has a vibrator connected to PM8916. Add it to the device tree. Reviewed-by: Stephan Gerhold <stephan@gerhold.net> Signed-off-by: Nikita Travkin <nikitos.tr@gmail.com> Link: https://lore.kernel.org/r/20201113175917.189123-1-nikitos.tr@gmail.com Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2020-11-23arm64: dts: qcom: msm8916-samsung-a3u: add nodes for touchscreenMichael Srba1-0/+29
This patch wires up touchscreen support on Samsung Galaxy A3 2015. Reviewed-by: Stephan Gerhold <stephan@gerhold.net> Signed-off-by: Michael Srba <Michael.Srba@seznam.cz> Link: https://lore.kernel.org/r/20201115195058.27097-1-michael.srba@seznam.cz Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2020-11-23arm64: dts: qcom: sc7180: Add prox sensor to LTE sku Lazor boardsStephen Boyd5-7/+22
There's a proximity sensor on Lazor devices, but only for LTE SKUs. Enable it only on the Lazor LTE SKUs and also configure it properly so it works. Cc: Douglas Anderson <dianders@chromium.org> Cc: Matthias Kaehlcke <mka@chromium.org> Reviewed-by: Douglas Anderson <dianders@chromium.org> Signed-off-by: Stephen Boyd <swboyd@chromium.org> Link: https://lore.kernel.org/r/20201120183825.547310-1-swboyd@chromium.org Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2020-11-23arm64: dts: qcom: sc7180: Remove double pull-up on p-sensor-int-lStephen Boyd1-1/+2
This interrupt has an external pull-up so we don't need to pull it up again. Drop the internal pull here. Note I don't think this really changes anything, just noticed while looking at this irq pin. Reviewed-by: Douglas Anderson <dianders@chromium.org> Cc: Douglas Anderson <dianders@chromium.org> Signed-off-by: Stephen Boyd <swboyd@chromium.org> Link: https://lore.kernel.org/r/20201120200913.618274-1-swboyd@chromium.org Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2020-11-23arm64: dts: qcom: add sm8250 fastrpc nodesJonathan Marek1-2/+113
Add fastrpc nodes for sDSP, cDSP, and aDSP. Signed-off-by: Jonathan Marek <jonathan@marek.ca> Link: https://lore.kernel.org/r/20200908131500.19891-1-jonathan@marek.ca Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2020-11-23arm64: dts: qcom: qrb5165-rb5: Add USB supportManivannan Sadhasivam1-0/+46
RB5 makes use of the two USB controllers onboard. USB0 is connected to the Type C port and USB1 is connected to USB3.1 HUB which exposes following downstream ports: * 2 Type A ports * 2 HS/SS ports on the expansion connector * USB to LAN device Hence, enable these two controllers with the required PHYs. Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Link: https://lore.kernel.org/r/20200917082622.6823-4-manivannan.sadhasivam@linaro.org Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2020-11-23arm64: dts: qcom: sm8250: Add support for PRNG EEManivannan Sadhasivam1-0/+7
RNG (Random Number Generator) in SM8250 features PRNG EE (Execution Environment), hence add devicetree support for it. Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Link: https://lore.kernel.org/r/20200921065806.10928-1-manivannan.sadhasivam@linaro.org Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2020-11-23arm64: dts: qcom: sm8250: correct compatible for sm8250-mtpDmitry Baryshkov1-1/+1
Qualcomm boards should define two compatible strings: one for board, anoter one for SoC family. sm8250-mtp.dts lists just the board compatible, which makes it incompatible with qcom.yaml schema. Reviewed-by: Vinod Koul <vkoul@kernel.org> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Fixes: 60378f1a171e ("arm64: dts: qcom: sm8250: Add sm8250 dts file") Link: https://lore.kernel.org/r/20200930112133.2091505-1-dmitry.baryshkov@linaro.org Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2020-11-23arm64: dts: qcom: sm8250: add iommus entry to QUP nodesDmitry Baryshkov1-0/+3
Enable IOMMUs configuration for QUP nodes to stop SM8250 boards from rebooting when using I2C DMA transfers. Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Link: https://lore.kernel.org/r/20201010132125.416064-1-dmitry.baryshkov@linaro.org Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2020-11-23arm64: dts: qcom: rb5: Add support for uSD cardManivannan Sadhasivam1-0/+41
Add support for uSD card on RB5 using the SDHC2 interface. Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> [DB: disabled 1.8V support to get SDHC to work] Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Link: https://lore.kernel.org/r/20201028190955.1264526-2-dmitry.baryshkov@linaro.org Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2020-11-23arm64: dts: qcom: sm8250: Add support for SDC2Manivannan Sadhasivam1-0/+45
Add support for SDC2 which can be used to interface uSD card. Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> [DB: minor fixes: clocks, iommus, opps] Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Link: https://lore.kernel.org/r/20201028190955.1264526-1-dmitry.baryshkov@linaro.org Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2020-11-23arm64: dts: qcom: add sm8250 hdk dtsJonathan Marek2-0/+455
Add initial HDK865 dts, based on sm8250-mtp, with a few changes. Notably, regulator configs are changed a bit. Signed-off-by: Jonathan Marek <jonathan@marek.ca> Link: https://lore.kernel.org/r/20200609194030.17756-9-jonathan@marek.ca Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2020-11-23arm64: dts: qcom: add sm8150 hdk dtsJonathan Marek2-0/+464
Add initial HDK855 dts, based on sm8150-mtp, with a few changes. Signed-off-by: Jonathan Marek <jonathan@marek.ca> Link: https://lore.kernel.org/r/20200609194030.17756-8-jonathan@marek.ca Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2020-11-23arm64: dts: qcom: sm8250: Add USB and PHY device nodesJonathan Marek1-0/+180
Add device nodes for the USB3 controller, QMP SS PHY and SNPS HS PHY. Signed-off-by: Jonathan Marek <jonathan@marek.ca> Link: https://lore.kernel.org/r/20200609194030.17756-7-jonathan@marek.ca Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2020-11-23arm64: dts: qcom: sm8150: Add secondary USB and PHY nodesJonathan Marek1-0/+89
Add dts nodes for the secondary USB controller and related PHY nodes. Signed-off-by: Jonathan Marek <jonathan@marek.ca> Link: https://lore.kernel.org/r/20200609194030.17756-6-jonathan@marek.ca Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2020-11-20arm64: dts: qcom: sm8250: add apps_smmu nodeJonathan Marek1-0/+107
Add the apps_smmu node for sm8250. For UFS, now that the kernel initializes the iommu, the stream mappings set by the bootloader are cleared. Adding the iommus property is required so that new mappings are created for UFS. Signed-off-by: Jonathan Marek <jonathan@marek.ca> Link: https://lore.kernel.org/r/20200609194030.17756-5-jonathan@marek.ca Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2020-11-20arm64: dts: qcom: sm8150: add apps_smmu nodeJonathan Marek1-0/+91
Add the apps_smmu node for sm8150. For UFS, now that the kernel initializes the iommu, the stream mappings set by the bootloader are cleared. Adding the iommus property is required so that new mappings are created for UFS. Signed-off-by: Jonathan Marek <jonathan@marek.ca> Reviewed-by: Sai Prakash Ranjan <saiprakash.ranjan@codeaurora.org> Tested-by: Sai Prakash Ranjan <saiprakash.ranjan@codeaurora.org> Link: https://lore.kernel.org/r/20200609194030.17756-4-jonathan@marek.ca Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2020-11-20arm64: dts: qcom: sm8150: Add LLC support for sm8150Souradeep Chowdhury1-0/+7
Add LLCC system cache controller entry for sm8150 to support sm8150 for LLCC. Signed-off-by: Souradeep Chowdhury <schowdhu@codeaurora.org> Link: https://lore.kernel.org/r/8f0e818485941076d62a8dc9f711b0fb868ba080.1601452132.git.schowdhu@codeaurora.org Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
generated by cgit v1.2.3 (git 2.39.0) at 2025-08-15 07:12:09 +0300