diff options
Diffstat (limited to 'tools')
| -rw-r--r-- | tools/testing/selftests/netfilter/Makefile | 3 | ||||
| -rwxr-xr-x | tools/testing/selftests/netfilter/conntrack_vrf.sh | 219 | ||||
| -rwxr-xr-x | tools/testing/selftests/netfilter/nft_nat.sh | 33 | ||||
| -rwxr-xr-x | tools/testing/selftests/netfilter/nft_queue.sh | 54 |
4 files changed, 298 insertions, 11 deletions
diff --git a/tools/testing/selftests/netfilter/Makefile b/tools/testing/selftests/netfilter/Makefile index 8748199ac109..ffca314897c4 100644 --- a/tools/testing/selftests/netfilter/Makefile +++ b/tools/testing/selftests/netfilter/Makefile @@ -5,7 +5,8 @@ TEST_PROGS := nft_trans_stress.sh nft_fib.sh nft_nat.sh bridge_brouter.sh \ conntrack_icmp_related.sh nft_flowtable.sh ipvs.sh \ nft_concat_range.sh nft_conntrack_helper.sh \ nft_queue.sh nft_meta.sh nf_nat_edemux.sh \ - ipip-conntrack-mtu.sh conntrack_tcp_unreplied.sh + ipip-conntrack-mtu.sh conntrack_tcp_unreplied.sh \ + conntrack_vrf.sh LDLIBS = -lmnl TEST_GEN_FILES = nf-queue diff --git a/tools/testing/selftests/netfilter/conntrack_vrf.sh b/tools/testing/selftests/netfilter/conntrack_vrf.sh new file mode 100755 index 000000000000..91f3ef0f1192 --- /dev/null +++ b/tools/testing/selftests/netfilter/conntrack_vrf.sh @@ -0,0 +1,219 @@ +#!/bin/sh + +# This script demonstrates interaction of conntrack and vrf. +# The vrf driver calls the netfilter hooks again, with oif/iif +# pointing at the VRF device. +# +# For ingress, this means first iteration has iifname of lower/real +# device. In this script, thats veth0. +# Second iteration is iifname set to vrf device, tvrf in this script. +# +# For egress, this is reversed: first iteration has the vrf device, +# second iteration is done with the lower/real/veth0 device. +# +# test_ct_zone_in demonstrates unexpected change of nftables +# behavior # caused by commit 09e856d54bda5f28 "vrf: Reset skb conntrack +# connection on VRF rcv" +# +# It was possible to assign conntrack zone to a packet (or mark it for +# `notracking`) in the prerouting chain before conntrack, based on real iif. +# +# After the change, the zone assignment is lost and the zone is assigned based +# on the VRF master interface (in case such a rule exists). +# assignment is lost. Instead, assignment based on the `iif` matching +# Thus it is impossible to distinguish packets based on the original +# interface. +# +# test_masquerade_vrf and test_masquerade_veth0 demonstrate the problem +# that was supposed to be fixed by the commit mentioned above to make sure +# that any fix to test case 1 won't break masquerade again. + +ksft_skip=4 + +IP0=172.30.30.1 +IP1=172.30.30.2 +PFXL=30 +ret=0 + +sfx=$(mktemp -u "XXXXXXXX") +ns0="ns0-$sfx" +ns1="ns1-$sfx" + +cleanup() +{ + ip netns pids $ns0 | xargs kill 2>/dev/null + ip netns pids $ns1 | xargs kill 2>/dev/null + + ip netns del $ns0 $ns1 +} + +nft --version > /dev/null 2>&1 +if [ $? -ne 0 ];then + echo "SKIP: Could not run test without nft tool" + exit $ksft_skip +fi + +ip -Version > /dev/null 2>&1 +if [ $? -ne 0 ];then + echo "SKIP: Could not run test without ip tool" + exit $ksft_skip +fi + +ip netns add "$ns0" +if [ $? -ne 0 ];then + echo "SKIP: Could not create net namespace $ns0" + exit $ksft_skip +fi +ip netns add "$ns1" + +trap cleanup EXIT + +ip netns exec $ns0 sysctl -q -w net.ipv4.conf.default.rp_filter=0 +ip netns exec $ns0 sysctl -q -w net.ipv4.conf.all.rp_filter=0 +ip netns exec $ns0 sysctl -q -w net.ipv4.conf.all.rp_filter=0 + +ip link add veth0 netns "$ns0" type veth peer name veth0 netns "$ns1" > /dev/null 2>&1 +if [ $? -ne 0 ];then + echo "SKIP: Could not add veth device" + exit $ksft_skip +fi + +ip -net $ns0 li add tvrf type vrf table 9876 +if [ $? -ne 0 ];then + echo "SKIP: Could not add vrf device" + exit $ksft_skip +fi + +ip -net $ns0 li set lo up + +ip -net $ns0 li set veth0 master tvrf +ip -net $ns0 li set tvrf up +ip -net $ns0 li set veth0 up +ip -net $ns1 li set veth0 up + +ip -net $ns0 addr add $IP0/$PFXL dev veth0 +ip -net $ns1 addr add $IP1/$PFXL dev veth0 + +ip netns exec $ns1 iperf3 -s > /dev/null 2>&1& +if [ $? -ne 0 ];then + echo "SKIP: Could not start iperf3" + exit $ksft_skip +fi + +# test vrf ingress handling. +# The incoming connection should be placed in conntrack zone 1, +# as decided by the first iteration of the ruleset. +test_ct_zone_in() +{ +ip netns exec $ns0 nft -f - <<EOF +table testct { + chain rawpre { + type filter hook prerouting priority raw; + + iif { veth0, tvrf } counter meta nftrace set 1 + iif veth0 counter ct zone set 1 counter return + iif tvrf counter ct zone set 2 counter return + ip protocol icmp counter + notrack counter + } + + chain rawout { + type filter hook output priority raw; + + oif veth0 counter ct zone set 1 counter return + oif tvrf counter ct zone set 2 counter return + notrack counter + } +} +EOF + ip netns exec $ns1 ping -W 1 -c 1 -I veth0 $IP0 > /dev/null + + # should be in zone 1, not zone 2 + count=$(ip netns exec $ns0 conntrack -L -s $IP1 -d $IP0 -p icmp --zone 1 2>/dev/null | wc -l) + if [ $count -eq 1 ]; then + echo "PASS: entry found in conntrack zone 1" + else + echo "FAIL: entry not found in conntrack zone 1" + count=$(ip netns exec $ns0 conntrack -L -s $IP1 -d $IP0 -p icmp --zone 2 2> /dev/null | wc -l) + if [ $count -eq 1 ]; then + echo "FAIL: entry found in zone 2 instead" + else + echo "FAIL: entry not in zone 1 or 2, dumping table" + ip netns exec $ns0 conntrack -L + ip netns exec $ns0 nft list ruleset + fi + fi +} + +# add masq rule that gets evaluated w. outif set to vrf device. +# This tests the first iteration of the packet through conntrack, +# oifname is the vrf device. +test_masquerade_vrf() +{ + ip netns exec $ns0 conntrack -F 2>/dev/null + +ip netns exec $ns0 nft -f - <<EOF +flush ruleset +table ip nat { + chain postrouting { + type nat hook postrouting priority 0; + # NB: masquerade should always be combined with 'oif(name) bla', + # lack of this is intentional here, we want to exercise double-snat. + ip saddr 172.30.30.0/30 counter masquerade random + } +} +EOF + ip netns exec $ns0 ip vrf exec tvrf iperf3 -t 1 -c $IP1 >/dev/null + if [ $? -ne 0 ]; then + echo "FAIL: iperf3 connect failure with masquerade + sport rewrite on vrf device" + ret=1 + return + fi + + # must also check that nat table was evaluated on second (lower device) iteration. + ip netns exec $ns0 nft list table ip nat |grep -q 'counter packets 2' + if [ $? -eq 0 ]; then + echo "PASS: iperf3 connect with masquerade + sport rewrite on vrf device" + else + echo "FAIL: vrf masq rule has unexpected counter value" + ret=1 + fi +} + +# add masq rule that gets evaluated w. outif set to veth device. +# This tests the 2nd iteration of the packet through conntrack, +# oifname is the lower device (veth0 in this case). +test_masquerade_veth() +{ + ip netns exec $ns0 conntrack -F 2>/dev/null +ip netns exec $ns0 nft -f - <<EOF +flush ruleset +table ip nat { + chain postrouting { + type nat hook postrouting priority 0; + meta oif veth0 ip saddr 172.30.30.0/30 counter masquerade random + } +} +EOF + ip netns exec $ns0 ip vrf exec tvrf iperf3 -t 1 -c $IP1 > /dev/null + if [ $? -ne 0 ]; then + echo "FAIL: iperf3 connect failure with masquerade + sport rewrite on veth device" + ret=1 + return + fi + + # must also check that nat table was evaluated on second (lower device) iteration. + ip netns exec $ns0 nft list table ip nat |grep -q 'counter packets 2' + if [ $? -eq 0 ]; then + echo "PASS: iperf3 connect with masquerade + sport rewrite on veth device" + else + echo "FAIL: vrf masq rule has unexpected counter value" + ret=1 + fi +} + +test_ct_zone_in +test_masquerade_vrf +test_masquerade_veth + +exit $ret diff --git a/tools/testing/selftests/netfilter/nft_nat.sh b/tools/testing/selftests/netfilter/nft_nat.sh index da1c1e4b6c86..d88867d2fed7 100755 --- a/tools/testing/selftests/netfilter/nft_nat.sh +++ b/tools/testing/selftests/netfilter/nft_nat.sh @@ -759,19 +759,21 @@ test_port_shadow() local result="" local logmsg="" - echo ROUTER | ip netns exec "$ns0" nc -w 5 -u -l -p 1405 >/dev/null 2>&1 & - nc_r=$! + # make shadow entry, from client (ns2), going to (ns1), port 41404, sport 1405. + echo "fake-entry" | ip netns exec "$ns2" timeout 1 socat -u STDIN UDP:"$daddrc":41404,sourceport=1405 - echo CLIENT | ip netns exec "$ns2" nc -w 5 -u -l -p 1405 >/dev/null 2>&1 & - nc_c=$! + echo ROUTER | ip netns exec "$ns0" timeout 5 socat -u STDIN UDP4-LISTEN:1405 & + sc_r=$! - # make shadow entry, from client (ns2), going to (ns1), port 41404, sport 1405. - echo "fake-entry" | ip netns exec "$ns2" nc -w 1 -p 1405 -u "$daddrc" 41404 > /dev/null + echo CLIENT | ip netns exec "$ns2" timeout 5 socat -u STDIN UDP4-LISTEN:1405,reuseport & + sc_c=$! + + sleep 0.3 # ns1 tries to connect to ns0:1405. With default settings this should connect # to client, it matches the conntrack entry created above. - result=$(echo "" | ip netns exec "$ns1" nc -w 1 -p 41404 -u "$daddrs" 1405) + result=$(echo "data" | ip netns exec "$ns1" timeout 1 socat - UDP:"$daddrs":1405,sourceport=41404) if [ "$result" = "$expect" ] ;then echo "PASS: portshadow test $test: got reply from ${expect}${logmsg}" @@ -780,7 +782,7 @@ test_port_shadow() ret=1 fi - kill $nc_r $nc_c 2>/dev/null + kill $sc_r $sc_c 2>/dev/null # flush udp entries for next test round, if any ip netns exec "$ns0" conntrack -F >/dev/null 2>&1 @@ -816,11 +818,10 @@ table $family raw { chain prerouting { type filter hook prerouting priority -300; policy accept; meta iif veth0 udp dport 1405 notrack - udp dport 1405 notrack } chain output { type filter hook output priority -300; policy accept; - udp sport 1405 notrack + meta oif veth0 udp sport 1405 notrack } } EOF @@ -851,6 +852,18 @@ test_port_shadowing() { local family="ip" + conntrack -h >/dev/null 2>&1 + if [ $? -ne 0 ];then + echo "SKIP: Could not run nat port shadowing test without conntrack tool" + return + fi + + socat -h > /dev/null 2>&1 + if [ $? -ne 0 ];then + echo "SKIP: Could not run nat port shadowing test without socat tool" + return + fi + ip netns exec "$ns0" sysctl net.ipv4.conf.veth0.forwarding=1 > /dev/null ip netns exec "$ns0" sysctl net.ipv4.conf.veth1.forwarding=1 > /dev/null diff --git a/tools/testing/selftests/netfilter/nft_queue.sh b/tools/testing/selftests/netfilter/nft_queue.sh index 3d202b90b33d..7d27f1f3bc01 100755 --- a/tools/testing/selftests/netfilter/nft_queue.sh +++ b/tools/testing/selftests/netfilter/nft_queue.sh @@ -16,6 +16,10 @@ timeout=4 cleanup() { + ip netns pids ${ns1} | xargs kill 2>/dev/null + ip netns pids ${ns2} | xargs kill 2>/dev/null + ip netns pids ${nsrouter} | xargs kill 2>/dev/null + ip netns del ${ns1} ip netns del ${ns2} ip netns del ${nsrouter} @@ -332,6 +336,55 @@ EOF echo "PASS: tcp via loopback and re-queueing" } +test_icmp_vrf() { + ip -net $ns1 link add tvrf type vrf table 9876 + if [ $? -ne 0 ];then + echo "SKIP: Could not add vrf device" + return + fi + + ip -net $ns1 li set eth0 master tvrf + ip -net $ns1 li set tvrf up + + ip -net $ns1 route add 10.0.2.0/24 via 10.0.1.1 dev eth0 table 9876 +ip netns exec ${ns1} nft -f /dev/stdin <<EOF +flush ruleset +table inet filter { + chain output { + type filter hook output priority 0; policy accept; + meta oifname "tvrf" icmp type echo-request counter queue num 1 + meta oifname "eth0" icmp type echo-request counter queue num 1 + } + chain post { + type filter hook postrouting priority 0; policy accept; + meta oifname "tvrf" icmp type echo-request counter queue num 1 + meta oifname "eth0" icmp type echo-request counter queue num 1 + } +} +EOF + ip netns exec ${ns1} ./nf-queue -q 1 -t $timeout & + local nfqpid=$! + + sleep 1 + ip netns exec ${ns1} ip vrf exec tvrf ping -c 1 10.0.2.99 > /dev/null + + for n in output post; do + for d in tvrf eth0; do + ip netns exec ${ns1} nft list chain inet filter $n | grep -q "oifname \"$d\" icmp type echo-request counter packets 1" + if [ $? -ne 0 ] ; then + echo "FAIL: chain $n: icmp packet counter mismatch for device $d" 1>&2 + ip netns exec ${ns1} nft list ruleset + ret=1 + return + fi + done + done + + wait $nfqpid + [ $? -eq 0 ] && echo "PASS: icmp+nfqueue via vrf" + wait 2>/dev/null +} + ip netns exec ${nsrouter} sysctl net.ipv6.conf.all.forwarding=1 > /dev/null ip netns exec ${nsrouter} sysctl net.ipv4.conf.veth0.forwarding=1 > /dev/null ip netns exec ${nsrouter} sysctl net.ipv4.conf.veth1.forwarding=1 > /dev/null @@ -372,5 +425,6 @@ test_queue 20 test_tcp_forward test_tcp_localhost test_tcp_localhost_requeue +test_icmp_vrf exit $ret |