Merge git://git.kernel.org/pub/scm/linux/kernel/git/pablo/nf

Pablo Neira Ayuso says:

====================
Netfilter fixes for net

The following patchset contains Netfilter/IPVS fixes for net:

1) Add selftest for vrf+conntrack, from Florian Westphal.

2) Extend nfqueue selftest to cover nfqueue, also from Florian.

3) Remove duplicated include in nft_payload, from Wan Jiabing.

4) Several improvements to the nat port shadowing selftest,
   from Phil Sutter.

5) Fix filtering of reply tuple in ctnetlink, from Florent Fourcot.

6) Do not override error with -EINVAL in filter setup path, also
   from Florent.

7) Honor sysctl_expire_nodest_conn regardless conn_reuse_mode for
   reused connections, from yangxingwu.

8) Replace snprintf() by sysfs_emit() in xt_IDLETIMER as reported
   by Coccinelle, from Jing Yao.

9) Incorrect IPv6 tunnel match in flowtable offload, from Will
   Mortensen.

10) Switch port shadow selftest to use socat, from Florian Westphal.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>

4 files changed, 298 insertions, 11 deletions

diff --git a/tools/testing/selftests/netfilter/Makefile b/tools/testing/selftests/netfilter/Makefile
index 8748199ac109..ffca314897c4 100644
--- a/tools/testing/selftests/netfilter/Makefile
+++ b/tools/testing/selftests/netfilter/Makefile
@@ -5,7 +5,8 @@ TEST_PROGS := nft_trans_stress.sh nft_fib.sh nft_nat.sh bridge_brouter.sh \
 	conntrack_icmp_related.sh nft_flowtable.sh ipvs.sh \
 	nft_concat_range.sh nft_conntrack_helper.sh \
 	nft_queue.sh nft_meta.sh nf_nat_edemux.sh \
-	ipip-conntrack-mtu.sh conntrack_tcp_unreplied.sh
+	ipip-conntrack-mtu.sh conntrack_tcp_unreplied.sh \
+	conntrack_vrf.sh
 
 LDLIBS = -lmnl
 TEST_GEN_FILES =  nf-queue
diff --git a/tools/testing/selftests/netfilter/conntrack_vrf.sh b/tools/testing/selftests/netfilter/conntrack_vrf.sh
new file mode 100755
index 000000000000..91f3ef0f1192
--- /dev/null
+++ b/tools/testing/selftests/netfilter/conntrack_vrf.sh
@@ -0,0 +1,219 @@
+#!/bin/sh
+
+# This script demonstrates interaction of conntrack and vrf.
+# The vrf driver calls the netfilter hooks again, with oif/iif
+# pointing at the VRF device.
+#
+# For ingress, this means first iteration has iifname of lower/real
+# device.  In this script, thats veth0.
+# Second iteration is iifname set to vrf device, tvrf in this script.
+#
+# For egress, this is reversed: first iteration has the vrf device,
+# second iteration is done with the lower/real/veth0 device.
+#
+# test_ct_zone_in demonstrates unexpected change of nftables
+# behavior # caused by commit 09e856d54bda5f28 "vrf: Reset skb conntrack
+# connection on VRF rcv"
+#
+# It was possible to assign conntrack zone to a packet (or mark it for
+# `notracking`) in the prerouting chain before conntrack, based on real iif.
+#
+# After the change, the zone assignment is lost and the zone is assigned based
+# on the VRF master interface (in case such a rule exists).
+# assignment is lost. Instead, assignment based on the `iif` matching
+# Thus it is impossible to distinguish packets based on the original
+# interface.
+#
+# test_masquerade_vrf and test_masquerade_veth0 demonstrate the problem
+# that was supposed to be fixed by the commit mentioned above to make sure
+# that any fix to test case 1 won't break masquerade again.
+
+ksft_skip=4
+
+IP0=172.30.30.1
+IP1=172.30.30.2
+PFXL=30
+ret=0
+
+sfx=$(mktemp -u "XXXXXXXX")
+ns0="ns0-$sfx"
+ns1="ns1-$sfx"
+
+cleanup()
+{
+	ip netns pids $ns0 | xargs kill 2>/dev/null
+	ip netns pids $ns1 | xargs kill 2>/dev/null
+
+	ip netns del $ns0 $ns1
+}
+
+nft --version > /dev/null 2>&1
+if [ $? -ne 0 ];then
+	echo "SKIP: Could not run test without nft tool"
+	exit $ksft_skip
+fi
+
+ip -Version > /dev/null 2>&1
+if [ $? -ne 0 ];then
+	echo "SKIP: Could not run test without ip tool"
+	exit $ksft_skip
+fi
+
+ip netns add "$ns0"
+if [ $? -ne 0 ];then
+	echo "SKIP: Could not create net namespace $ns0"
+	exit $ksft_skip
+fi
+ip netns add "$ns1"
+
+trap cleanup EXIT
+
+ip netns exec $ns0 sysctl -q -w net.ipv4.conf.default.rp_filter=0
+ip netns exec $ns0 sysctl -q -w net.ipv4.conf.all.rp_filter=0
+ip netns exec $ns0 sysctl -q -w net.ipv4.conf.all.rp_filter=0
+
+ip link add veth0 netns "$ns0" type veth peer name veth0 netns "$ns1" > /dev/null 2>&1
+if [ $? -ne 0 ];then
+	echo "SKIP: Could not add veth device"
+	exit $ksft_skip
+fi
+
+ip -net $ns0 li add tvrf type vrf table 9876
+if [ $? -ne 0 ];then
+	echo "SKIP: Could not add vrf device"
+	exit $ksft_skip
+fi
+
+ip -net $ns0 li set lo up
+
+ip -net $ns0 li set veth0 master tvrf
+ip -net $ns0 li set tvrf up
+ip -net $ns0 li set veth0 up
+ip -net $ns1 li set veth0 up
+
+ip -net $ns0 addr add $IP0/$PFXL dev veth0
+ip -net $ns1 addr add $IP1/$PFXL dev veth0
+
+ip netns exec $ns1 iperf3 -s > /dev/null 2>&1&
+if [ $? -ne 0 ];then
+	echo "SKIP: Could not start iperf3"
+	exit $ksft_skip
+fi
+
+# test vrf ingress handling.
+# The incoming connection should be placed in conntrack zone 1,
+# as decided by the first iteration of the ruleset.
+test_ct_zone_in()
+{
+ip netns exec $ns0 nft -f - <<EOF
+table testct {
+	chain rawpre {
+		type filter hook prerouting priority raw;
+
+		iif { veth0, tvrf } counter meta nftrace set 1
+		iif veth0 counter ct zone set 1 counter return
+		iif tvrf counter ct zone set 2 counter return
+		ip protocol icmp counter
+		notrack counter
+	}
+
+	chain rawout {
+		type filter hook output priority raw;
+
+		oif veth0 counter ct zone set 1 counter return
+		oif tvrf counter ct zone set 2 counter return
+		notrack counter
+	}
+}
+EOF
+	ip netns exec $ns1 ping -W 1 -c 1 -I veth0 $IP0 > /dev/null
+
+	# should be in zone 1, not zone 2
+	count=$(ip netns exec $ns0 conntrack -L -s $IP1 -d $IP0 -p icmp --zone 1 2>/dev/null | wc -l)
+	if [ $count -eq 1 ]; then
+		echo "PASS: entry found in conntrack zone 1"
+	else
+		echo "FAIL: entry not found in conntrack zone 1"
+		count=$(ip netns exec $ns0 conntrack -L -s $IP1 -d $IP0 -p icmp --zone 2 2> /dev/null | wc -l)
+		if [ $count -eq 1 ]; then
+			echo "FAIL: entry found in zone 2 instead"
+		else
+			echo "FAIL: entry not in zone 1 or 2, dumping table"
+			ip netns exec $ns0 conntrack -L
+			ip netns exec $ns0 nft list ruleset
+		fi
+	fi
+}
+
+# add masq rule that gets evaluated w. outif set to vrf device.
+# This tests the first iteration of the packet through conntrack,
+# oifname is the vrf device.
+test_masquerade_vrf()
+{
+	ip netns exec $ns0 conntrack -F 2>/dev/null
+
+ip netns exec $ns0 nft -f - <<EOF
+flush ruleset
+table ip nat {
+	chain postrouting {
+		type nat hook postrouting priority 0;
+		# NB: masquerade should always be combined with 'oif(name) bla',
+		# lack of this is intentional here, we want to exercise double-snat.
+		ip saddr 172.30.30.0/30 counter masquerade random
+	}
+}
+EOF
+	ip netns exec $ns0 ip vrf exec tvrf iperf3 -t 1 -c $IP1 >/dev/null
+	if [ $? -ne 0 ]; then
+		echo "FAIL: iperf3 connect failure with masquerade + sport rewrite on vrf device"
+		ret=1
+		return
+	fi
+
+	# must also check that nat table was evaluated on second (lower device) iteration.
+	ip netns exec $ns0 nft list table ip nat |grep -q 'counter packets 2'
+	if [ $? -eq 0 ]; then
+		echo "PASS: iperf3 connect with masquerade + sport rewrite on vrf device"
+	else
+		echo "FAIL: vrf masq rule has unexpected counter value"
+		ret=1
+	fi
+}
+
+# add masq rule that gets evaluated w. outif set to veth device.
+# This tests the 2nd iteration of the packet through conntrack,
+# oifname is the lower device (veth0 in this case).
+test_masquerade_veth()
+{
+	ip netns exec $ns0 conntrack -F 2>/dev/null
+ip netns exec $ns0 nft -f - <<EOF
+flush ruleset
+table ip nat {
+	chain postrouting {
+		type nat hook postrouting priority 0;
+		meta oif veth0 ip saddr 172.30.30.0/30 counter masquerade random
+	}
+}
+EOF
+	ip netns exec $ns0 ip vrf exec tvrf iperf3 -t 1 -c $IP1 > /dev/null
+	if [ $? -ne 0 ]; then
+		echo "FAIL: iperf3 connect failure with masquerade + sport rewrite on veth device"
+		ret=1
+		return
+	fi
+
+	# must also check that nat table was evaluated on second (lower device) iteration.
+	ip netns exec $ns0 nft list table ip nat |grep -q 'counter packets 2'
+	if [ $? -eq 0 ]; then
+		echo "PASS: iperf3 connect with masquerade + sport rewrite on veth device"
+	else
+		echo "FAIL: vrf masq rule has unexpected counter value"
+		ret=1
+	fi
+}
+
+test_ct_zone_in
+test_masquerade_vrf
+test_masquerade_veth
+
+exit $ret
diff --git a/tools/testing/selftests/netfilter/nft_nat.sh b/tools/testing/selftests/netfilter/nft_nat.sh
index da1c1e4b6c86..d88867d2fed7 100755
--- a/tools/testing/selftests/netfilter/nft_nat.sh
+++ b/tools/testing/selftests/netfilter/nft_nat.sh
@@ -759,19 +759,21 @@ test_port_shadow()
 	local result=""
 	local logmsg=""
 
-	echo ROUTER | ip netns exec "$ns0" nc -w 5 -u -l -p 1405 >/dev/null 2>&1 &
-	nc_r=$!
+	# make shadow entry, from client (ns2), going to (ns1), port 41404, sport 1405.
+	echo "fake-entry" | ip netns exec "$ns2" timeout 1 socat -u STDIN UDP:"$daddrc":41404,sourceport=1405
 
-	echo CLIENT | ip netns exec "$ns2" nc -w 5 -u -l -p 1405 >/dev/null 2>&1 &
-	nc_c=$!
+	echo ROUTER | ip netns exec "$ns0" timeout 5 socat -u STDIN UDP4-LISTEN:1405 &
+	sc_r=$!
 
-	# make shadow entry, from client (ns2), going to (ns1), port 41404, sport 1405.
-	echo "fake-entry" | ip netns exec "$ns2" nc -w 1 -p 1405 -u "$daddrc" 41404 > /dev/null
+	echo CLIENT | ip netns exec "$ns2" timeout 5 socat -u STDIN UDP4-LISTEN:1405,reuseport &
+	sc_c=$!
+
+	sleep 0.3
 
 	# ns1 tries to connect to ns0:1405.  With default settings this should connect
 	# to client, it matches the conntrack entry created above.
 
-	result=$(echo "" | ip netns exec "$ns1" nc -w 1 -p 41404 -u "$daddrs" 1405)
+	result=$(echo "data" | ip netns exec "$ns1" timeout 1 socat - UDP:"$daddrs":1405,sourceport=41404)
 
 	if [ "$result" = "$expect" ] ;then
 		echo "PASS: portshadow test $test: got reply from ${expect}${logmsg}"
@@ -780,7 +782,7 @@ test_port_shadow()
 		ret=1
 	fi
 
-	kill $nc_r $nc_c 2>/dev/null
+	kill $sc_r $sc_c 2>/dev/null
 
 	# flush udp entries for next test round, if any
 	ip netns exec "$ns0" conntrack -F >/dev/null 2>&1
@@ -816,11 +818,10 @@ table $family raw {
 	chain prerouting {
 		type filter hook prerouting priority -300; policy accept;
 		meta iif veth0 udp dport 1405 notrack
-		udp dport 1405 notrack
 	}
 	chain output {
 		type filter hook output priority -300; policy accept;
-		udp sport 1405 notrack
+		meta oif veth0 udp sport 1405 notrack
 	}
 }
 EOF
@@ -851,6 +852,18 @@ test_port_shadowing()
 {
 	local family="ip"
 
+	conntrack -h >/dev/null 2>&1
+	if [ $? -ne 0 ];then
+		echo "SKIP: Could not run nat port shadowing test without conntrack tool"
+		return
+	fi
+
+	socat -h > /dev/null 2>&1
+	if [ $? -ne 0 ];then
+		echo "SKIP: Could not run nat port shadowing test without socat tool"
+		return
+	fi
+
 	ip netns exec "$ns0" sysctl net.ipv4.conf.veth0.forwarding=1 > /dev/null
 	ip netns exec "$ns0" sysctl net.ipv4.conf.veth1.forwarding=1 > /dev/null
 
diff --git a/tools/testing/selftests/netfilter/nft_queue.sh b/tools/testing/selftests/netfilter/nft_queue.sh
index 3d202b90b33d..7d27f1f3bc01 100755
--- a/tools/testing/selftests/netfilter/nft_queue.sh
+++ b/tools/testing/selftests/netfilter/nft_queue.sh
@@ -16,6 +16,10 @@ timeout=4
 
 cleanup()
 {
+	ip netns pids ${ns1} | xargs kill 2>/dev/null
+	ip netns pids ${ns2} | xargs kill 2>/dev/null
+	ip netns pids ${nsrouter} | xargs kill 2>/dev/null
+
 	ip netns del ${ns1}
 	ip netns del ${ns2}
 	ip netns del ${nsrouter}
@@ -332,6 +336,55 @@ EOF
 	echo "PASS: tcp via loopback and re-queueing"
 }
 
+test_icmp_vrf() {
+	ip -net $ns1 link add tvrf type vrf table 9876
+	if [ $? -ne 0 ];then
+		echo "SKIP: Could not add vrf device"
+		return
+	fi
+
+	ip -net $ns1 li set eth0 master tvrf
+	ip -net $ns1 li set tvrf up
+
+	ip -net $ns1 route add 10.0.2.0/24 via 10.0.1.1 dev eth0 table 9876
+ip netns exec ${ns1} nft -f /dev/stdin <<EOF
+flush ruleset
+table inet filter {
+	chain output {
+		type filter hook output priority 0; policy accept;
+		meta oifname "tvrf" icmp type echo-request counter queue num 1
+		meta oifname "eth0" icmp type echo-request counter queue num 1
+	}
+	chain post {
+		type filter hook postrouting priority 0; policy accept;
+		meta oifname "tvrf" icmp type echo-request counter queue num 1
+		meta oifname "eth0" icmp type echo-request counter queue num 1
+	}
+}
+EOF
+	ip netns exec ${ns1} ./nf-queue -q 1 -t $timeout &
+	local nfqpid=$!
+
+	sleep 1
+	ip netns exec ${ns1} ip vrf exec tvrf ping -c 1 10.0.2.99 > /dev/null
+
+	for n in output post; do
+		for d in tvrf eth0; do
+			ip netns exec ${ns1} nft list chain inet filter $n | grep -q "oifname \"$d\" icmp type echo-request counter packets 1"
+			if [ $? -ne 0 ] ; then
+				echo "FAIL: chain $n: icmp packet counter mismatch for device $d" 1>&2
+				ip netns exec ${ns1} nft list ruleset
+				ret=1
+				return
+			fi
+		done
+	done
+
+	wait $nfqpid
+	[ $? -eq 0 ] && echo "PASS: icmp+nfqueue via vrf"
+	wait 2>/dev/null
+}
+
 ip netns exec ${nsrouter} sysctl net.ipv6.conf.all.forwarding=1 > /dev/null
 ip netns exec ${nsrouter} sysctl net.ipv4.conf.veth0.forwarding=1 > /dev/null
 ip netns exec ${nsrouter} sysctl net.ipv4.conf.veth1.forwarding=1 > /dev/null
@@ -372,5 +425,6 @@ test_queue 20
 test_tcp_forward
 test_tcp_localhost
 test_tcp_localhost_requeue
+test_icmp_vrf
 
 exit $ret