summaryrefslogtreecommitdiff
path: root/tools/testing
diff options
context:
space:
mode:
Diffstat (limited to 'tools/testing')
-rw-r--r--tools/testing/selftests/bpf/prog_tests/verifier.c2
-rw-r--r--tools/testing/selftests/bpf/progs/verifier_or_jmp32_k.c41
-rw-r--r--tools/testing/selftests/drivers/net/virtio_net/config8
-rw-r--r--tools/testing/selftests/fchmodat2/Makefile11
-rw-r--r--tools/testing/selftests/filesystems/statmount/statmount_test.c12
-rw-r--r--tools/testing/selftests/mm/map_fixed_noreplace.c24
-rw-r--r--tools/testing/selftests/net/Makefile2
-rw-r--r--tools/testing/selftests/net/config2
-rwxr-xr-xtools/testing/selftests/net/mptcp/userspace_pm.sh46
-rwxr-xr-xtools/testing/selftests/net/openvswitch/openvswitch.sh2
-rw-r--r--tools/testing/selftests/net/openvswitch/ovs-dpctl.py2
-rwxr-xr-xtools/testing/selftests/net/srv6_end_dx4_netfilter_test.sh335
-rwxr-xr-xtools/testing/selftests/net/srv6_end_dx6_netfilter_test.sh340
-rw-r--r--tools/testing/selftests/openat2/Makefile14
-rw-r--r--tools/testing/selftests/seccomp/seccomp_benchmark.c6
15 files changed, 810 insertions, 37 deletions
diff --git a/tools/testing/selftests/bpf/prog_tests/verifier.c b/tools/testing/selftests/bpf/prog_tests/verifier.c
index 6816ff064516..9dc3687bc406 100644
--- a/tools/testing/selftests/bpf/prog_tests/verifier.c
+++ b/tools/testing/selftests/bpf/prog_tests/verifier.c
@@ -53,6 +53,7 @@
#include "verifier_movsx.skel.h"
#include "verifier_netfilter_ctx.skel.h"
#include "verifier_netfilter_retcode.skel.h"
+#include "verifier_or_jmp32_k.skel.h"
#include "verifier_precision.skel.h"
#include "verifier_prevent_map_lookup.skel.h"
#include "verifier_raw_stack.skel.h"
@@ -171,6 +172,7 @@ void test_verifier_meta_access(void) { RUN(verifier_meta_access); }
void test_verifier_movsx(void) { RUN(verifier_movsx); }
void test_verifier_netfilter_ctx(void) { RUN(verifier_netfilter_ctx); }
void test_verifier_netfilter_retcode(void) { RUN(verifier_netfilter_retcode); }
+void test_verifier_or_jmp32_k(void) { RUN(verifier_or_jmp32_k); }
void test_verifier_precision(void) { RUN(verifier_precision); }
void test_verifier_prevent_map_lookup(void) { RUN(verifier_prevent_map_lookup); }
void test_verifier_raw_stack(void) { RUN(verifier_raw_stack); }
diff --git a/tools/testing/selftests/bpf/progs/verifier_or_jmp32_k.c b/tools/testing/selftests/bpf/progs/verifier_or_jmp32_k.c
new file mode 100644
index 000000000000..f37713a265ac
--- /dev/null
+++ b/tools/testing/selftests/bpf/progs/verifier_or_jmp32_k.c
@@ -0,0 +1,41 @@
+// SPDX-License-Identifier: GPL-2.0
+
+#include <linux/bpf.h>
+#include <bpf/bpf_helpers.h>
+#include "bpf_misc.h"
+
+SEC("socket")
+__description("or_jmp32_k: bit ops + branch on unknown value")
+__failure
+__msg("R0 invalid mem access 'scalar'")
+__naked void or_jmp32_k(void)
+{
+ asm volatile (" \
+ r0 = 0xffffffff; \
+ r0 /= 1; \
+ r1 = 0; \
+ w1 = -1; \
+ w1 >>= 1; \
+ w0 &= w1; \
+ w0 |= 2; \
+ if w0 != 0x7ffffffd goto l1; \
+ r0 = 1; \
+ exit; \
+l3: \
+ r0 = 5; \
+ *(u64*)(r0 - 8) = r0; \
+ exit; \
+l2: \
+ w0 -= 0xe; \
+ if w0 == 1 goto l3; \
+ r0 = 4; \
+ exit; \
+l1: \
+ w0 -= 0x7ffffff0; \
+ if w0 s>= 0xe goto l2; \
+ r0 = 3; \
+ exit; \
+" ::: __clobber_all);
+}
+
+char _license[] SEC("license") = "GPL";
diff --git a/tools/testing/selftests/drivers/net/virtio_net/config b/tools/testing/selftests/drivers/net/virtio_net/config
index f35de0542b60..bcf7555eaffe 100644
--- a/tools/testing/selftests/drivers/net/virtio_net/config
+++ b/tools/testing/selftests/drivers/net/virtio_net/config
@@ -1,2 +1,8 @@
-CONFIG_VIRTIO_NET=y
+CONFIG_BPF_SYSCALL=y
+CONFIG_CGROUP_BPF=y
+CONFIG_IPV6=y
+CONFIG_IPV6_MULTIPLE_TABLES=y
+CONFIG_NET_L3_MASTER_DEV=y
+CONFIG_NET_VRF=m
CONFIG_VIRTIO_DEBUG=y
+CONFIG_VIRTIO_NET=y
diff --git a/tools/testing/selftests/fchmodat2/Makefile b/tools/testing/selftests/fchmodat2/Makefile
index 71ec34bf1501..4373cea79b79 100644
--- a/tools/testing/selftests/fchmodat2/Makefile
+++ b/tools/testing/selftests/fchmodat2/Makefile
@@ -1,6 +1,15 @@
# SPDX-License-Identifier: GPL-2.0-or-later
-CFLAGS += -Wall -O2 -g -fsanitize=address -fsanitize=undefined -static-libasan $(KHDR_INCLUDES)
+CFLAGS += -Wall -O2 -g -fsanitize=address -fsanitize=undefined $(KHDR_INCLUDES)
+
+# gcc requires -static-libasan in order to ensure that Address Sanitizer's
+# library is the first one loaded. However, clang already statically links the
+# Address Sanitizer if -fsanitize is specified. Therefore, simply omit
+# -static-libasan for clang builds.
+ifeq ($(LLVM),)
+ CFLAGS += -static-libasan
+endif
+
TEST_GEN_PROGS := fchmodat2_test
include ../lib.mk
diff --git a/tools/testing/selftests/filesystems/statmount/statmount_test.c b/tools/testing/selftests/filesystems/statmount/statmount_test.c
index e6d7c4f1c85b..e8c019d72cbf 100644
--- a/tools/testing/selftests/filesystems/statmount/statmount_test.c
+++ b/tools/testing/selftests/filesystems/statmount/statmount_test.c
@@ -125,8 +125,16 @@ static uint32_t old_root_id, old_parent_id;
static void cleanup_namespace(void)
{
- fchdir(orig_root);
- chroot(".");
+ int ret;
+
+ ret = fchdir(orig_root);
+ if (ret == -1)
+ ksft_perror("fchdir to original root");
+
+ ret = chroot(".");
+ if (ret == -1)
+ ksft_perror("chroot to original root");
+
umount2(root_mntpoint, MNT_DETACH);
rmdir(root_mntpoint);
}
diff --git a/tools/testing/selftests/mm/map_fixed_noreplace.c b/tools/testing/selftests/mm/map_fixed_noreplace.c
index b74813fdc951..d53de2486080 100644
--- a/tools/testing/selftests/mm/map_fixed_noreplace.c
+++ b/tools/testing/selftests/mm/map_fixed_noreplace.c
@@ -67,7 +67,8 @@ int main(void)
dump_maps();
ksft_exit_fail_msg("Error: munmap failed!?\n");
}
- ksft_test_result_pass("mmap() @ 0x%lx-0x%lx p=%p result=%m\n", addr, addr + size, p);
+ ksft_print_msg("mmap() @ 0x%lx-0x%lx p=%p result=%m\n", addr, addr + size, p);
+ ksft_test_result_pass("mmap() 5*PAGE_SIZE at base\n");
addr = base_addr + page_size;
size = 3 * page_size;
@@ -76,7 +77,8 @@ int main(void)
dump_maps();
ksft_exit_fail_msg("Error: first mmap() failed unexpectedly\n");
}
- ksft_test_result_pass("mmap() @ 0x%lx-0x%lx p=%p result=%m\n", addr, addr + size, p);
+ ksft_print_msg("mmap() @ 0x%lx-0x%lx p=%p result=%m\n", addr, addr + size, p);
+ ksft_test_result_pass("mmap() 3*PAGE_SIZE at base+PAGE_SIZE\n");
/*
* Exact same mapping again:
@@ -93,7 +95,8 @@ int main(void)
dump_maps();
ksft_exit_fail_msg("Error:1: mmap() succeeded when it shouldn't have\n");
}
- ksft_test_result_pass("mmap() @ 0x%lx-0x%lx p=%p result=%m\n", addr, addr + size, p);
+ ksft_print_msg("mmap() @ 0x%lx-0x%lx p=%p result=%m\n", addr, addr + size, p);
+ ksft_test_result_pass("mmap() 5*PAGE_SIZE at base\n");
/*
* Second mapping contained within first:
@@ -111,7 +114,8 @@ int main(void)
dump_maps();
ksft_exit_fail_msg("Error:2: mmap() succeeded when it shouldn't have\n");
}
- ksft_test_result_pass("mmap() @ 0x%lx-0x%lx p=%p result=%m\n", addr, addr + size, p);
+ ksft_print_msg("mmap() @ 0x%lx-0x%lx p=%p result=%m\n", addr, addr + size, p);
+ ksft_test_result_pass("mmap() 2*PAGE_SIZE at base+PAGE_SIZE\n");
/*
* Overlap end of existing mapping:
@@ -128,7 +132,8 @@ int main(void)
dump_maps();
ksft_exit_fail_msg("Error:3: mmap() succeeded when it shouldn't have\n");
}
- ksft_test_result_pass("mmap() @ 0x%lx-0x%lx p=%p result=%m\n", addr, addr + size, p);
+ ksft_print_msg("mmap() @ 0x%lx-0x%lx p=%p result=%m\n", addr, addr + size, p);
+ ksft_test_result_pass("mmap() 2*PAGE_SIZE at base+(3*PAGE_SIZE)\n");
/*
* Overlap start of existing mapping:
@@ -145,7 +150,8 @@ int main(void)
dump_maps();
ksft_exit_fail_msg("Error:4: mmap() succeeded when it shouldn't have\n");
}
- ksft_test_result_pass("mmap() @ 0x%lx-0x%lx p=%p result=%m\n", addr, addr + size, p);
+ ksft_print_msg("mmap() @ 0x%lx-0x%lx p=%p result=%m\n", addr, addr + size, p);
+ ksft_test_result_pass("mmap() 2*PAGE_SIZE bytes at base\n");
/*
* Adjacent to start of existing mapping:
@@ -162,7 +168,8 @@ int main(void)
dump_maps();
ksft_exit_fail_msg("Error:5: mmap() failed when it shouldn't have\n");
}
- ksft_test_result_pass("mmap() @ 0x%lx-0x%lx p=%p result=%m\n", addr, addr + size, p);
+ ksft_print_msg("mmap() @ 0x%lx-0x%lx p=%p result=%m\n", addr, addr + size, p);
+ ksft_test_result_pass("mmap() PAGE_SIZE at base\n");
/*
* Adjacent to end of existing mapping:
@@ -179,7 +186,8 @@ int main(void)
dump_maps();
ksft_exit_fail_msg("Error:6: mmap() failed when it shouldn't have\n");
}
- ksft_test_result_pass("mmap() @ 0x%lx-0x%lx p=%p result=%m\n", addr, addr + size, p);
+ ksft_print_msg("mmap() @ 0x%lx-0x%lx p=%p result=%m\n", addr, addr + size, p);
+ ksft_test_result_pass("mmap() PAGE_SIZE at base+(4*PAGE_SIZE)\n");
addr = base_addr;
size = 5 * page_size;
diff --git a/tools/testing/selftests/net/Makefile b/tools/testing/selftests/net/Makefile
index 6da63d1831c1..bc3925200637 100644
--- a/tools/testing/selftests/net/Makefile
+++ b/tools/testing/selftests/net/Makefile
@@ -43,6 +43,8 @@ TEST_PROGS += srv6_hl2encap_red_l2vpn_test.sh
TEST_PROGS += srv6_end_next_csid_l3vpn_test.sh
TEST_PROGS += srv6_end_x_next_csid_l3vpn_test.sh
TEST_PROGS += srv6_end_flavors_test.sh
+TEST_PROGS += srv6_end_dx4_netfilter_test.sh
+TEST_PROGS += srv6_end_dx6_netfilter_test.sh
TEST_PROGS += vrf_strict_mode_test.sh
TEST_PROGS += arp_ndisc_evict_nocarrier.sh
TEST_PROGS += ndisc_unsolicited_na_test.sh
diff --git a/tools/testing/selftests/net/config b/tools/testing/selftests/net/config
index 04de7a6ba6f3..d4891f7a2bfa 100644
--- a/tools/testing/selftests/net/config
+++ b/tools/testing/selftests/net/config
@@ -101,3 +101,5 @@ CONFIG_NETFILTER_XT_MATCH_POLICY=m
CONFIG_CRYPTO_ARIA=y
CONFIG_XFRM_INTERFACE=m
CONFIG_XFRM_USER=m
+CONFIG_IP_NF_MATCH_RPFILTER=m
+CONFIG_IP6_NF_MATCH_RPFILTER=m
diff --git a/tools/testing/selftests/net/mptcp/userspace_pm.sh b/tools/testing/selftests/net/mptcp/userspace_pm.sh
index 9e2981f2d7f5..9cb05978269d 100755
--- a/tools/testing/selftests/net/mptcp/userspace_pm.sh
+++ b/tools/testing/selftests/net/mptcp/userspace_pm.sh
@@ -160,10 +160,12 @@ make_connection()
local is_v6=$1
local app_port=$app4_port
local connect_addr="10.0.1.1"
+ local client_addr="10.0.1.2"
local listen_addr="0.0.0.0"
if [ "$is_v6" = "v6" ]
then
connect_addr="dead:beef:1::1"
+ client_addr="dead:beef:1::2"
listen_addr="::"
app_port=$app6_port
else
@@ -206,6 +208,7 @@ make_connection()
[ "$server_serverside" = 1 ]
then
test_pass
+ print_title "Connection info: ${client_addr}:${client_port} -> ${connect_addr}:${app_port}"
else
test_fail "Expected tokens (c:${client_token} - s:${server_token}) and server (c:${client_serverside} - s:${server_serverside})"
mptcp_lib_result_print_all_tap
@@ -297,7 +300,7 @@ test_announce()
ip netns exec "$ns2"\
./pm_nl_ctl ann 10.0.2.2 token "$client4_token" id $client_addr_id dev\
ns2eth1
- print_test "ADD_ADDR id:${client_addr_id} 10.0.2.2 (ns2) => ns1, reuse port"
+ print_test "ADD_ADDR id:client 10.0.2.2 (ns2) => ns1, reuse port"
sleep 0.5
verify_announce_event $server_evts $ANNOUNCED $server4_token "10.0.2.2" $client_addr_id \
"$client4_port"
@@ -306,7 +309,7 @@ test_announce()
:>"$server_evts"
ip netns exec "$ns2" ./pm_nl_ctl ann\
dead:beef:2::2 token "$client6_token" id $client_addr_id dev ns2eth1
- print_test "ADD_ADDR6 id:${client_addr_id} dead:beef:2::2 (ns2) => ns1, reuse port"
+ print_test "ADD_ADDR6 id:client dead:beef:2::2 (ns2) => ns1, reuse port"
sleep 0.5
verify_announce_event "$server_evts" "$ANNOUNCED" "$server6_token" "dead:beef:2::2"\
"$client_addr_id" "$client6_port" "v6"
@@ -316,7 +319,7 @@ test_announce()
client_addr_id=$((client_addr_id+1))
ip netns exec "$ns2" ./pm_nl_ctl ann 10.0.2.2 token "$client4_token" id\
$client_addr_id dev ns2eth1 port $new4_port
- print_test "ADD_ADDR id:${client_addr_id} 10.0.2.2 (ns2) => ns1, new port"
+ print_test "ADD_ADDR id:client+1 10.0.2.2 (ns2) => ns1, new port"
sleep 0.5
verify_announce_event "$server_evts" "$ANNOUNCED" "$server4_token" "10.0.2.2"\
"$client_addr_id" "$new4_port"
@@ -327,7 +330,7 @@ test_announce()
# ADD_ADDR from the server to client machine reusing the subflow port
ip netns exec "$ns1" ./pm_nl_ctl ann 10.0.2.1 token "$server4_token" id\
$server_addr_id dev ns1eth2
- print_test "ADD_ADDR id:${server_addr_id} 10.0.2.1 (ns1) => ns2, reuse port"
+ print_test "ADD_ADDR id:server 10.0.2.1 (ns1) => ns2, reuse port"
sleep 0.5
verify_announce_event "$client_evts" "$ANNOUNCED" "$client4_token" "10.0.2.1"\
"$server_addr_id" "$app4_port"
@@ -336,7 +339,7 @@ test_announce()
:>"$client_evts"
ip netns exec "$ns1" ./pm_nl_ctl ann dead:beef:2::1 token "$server6_token" id\
$server_addr_id dev ns1eth2
- print_test "ADD_ADDR6 id:${server_addr_id} dead:beef:2::1 (ns1) => ns2, reuse port"
+ print_test "ADD_ADDR6 id:server dead:beef:2::1 (ns1) => ns2, reuse port"
sleep 0.5
verify_announce_event "$client_evts" "$ANNOUNCED" "$client6_token" "dead:beef:2::1"\
"$server_addr_id" "$app6_port" "v6"
@@ -346,7 +349,7 @@ test_announce()
server_addr_id=$((server_addr_id+1))
ip netns exec "$ns1" ./pm_nl_ctl ann 10.0.2.1 token "$server4_token" id\
$server_addr_id dev ns1eth2 port $new4_port
- print_test "ADD_ADDR id:${server_addr_id} 10.0.2.1 (ns1) => ns2, new port"
+ print_test "ADD_ADDR id:server+1 10.0.2.1 (ns1) => ns2, new port"
sleep 0.5
verify_announce_event "$client_evts" "$ANNOUNCED" "$client4_token" "10.0.2.1"\
"$server_addr_id" "$new4_port"
@@ -380,7 +383,7 @@ test_remove()
local invalid_token=$(( client4_token - 1 ))
ip netns exec "$ns2" ./pm_nl_ctl rem token $invalid_token id\
$client_addr_id > /dev/null 2>&1
- print_test "RM_ADDR id:${client_addr_id} ns2 => ns1, invalid token"
+ print_test "RM_ADDR id:client ns2 => ns1, invalid token"
local type
type=$(mptcp_lib_evts_get_info type "$server_evts")
if [ "$type" = "" ]
@@ -394,7 +397,7 @@ test_remove()
local invalid_id=$(( client_addr_id + 1 ))
ip netns exec "$ns2" ./pm_nl_ctl rem token "$client4_token" id\
$invalid_id > /dev/null 2>&1
- print_test "RM_ADDR id:${invalid_id} ns2 => ns1, invalid id"
+ print_test "RM_ADDR id:client+1 ns2 => ns1, invalid id"
type=$(mptcp_lib_evts_get_info type "$server_evts")
if [ "$type" = "" ]
then
@@ -407,7 +410,7 @@ test_remove()
:>"$server_evts"
ip netns exec "$ns2" ./pm_nl_ctl rem token "$client4_token" id\
$client_addr_id
- print_test "RM_ADDR id:${client_addr_id} ns2 => ns1"
+ print_test "RM_ADDR id:client ns2 => ns1"
sleep 0.5
verify_remove_event "$server_evts" "$REMOVED" "$server4_token" "$client_addr_id"
@@ -416,7 +419,7 @@ test_remove()
client_addr_id=$(( client_addr_id - 1 ))
ip netns exec "$ns2" ./pm_nl_ctl rem token "$client4_token" id\
$client_addr_id
- print_test "RM_ADDR id:${client_addr_id} ns2 => ns1"
+ print_test "RM_ADDR id:client-1 ns2 => ns1"
sleep 0.5
verify_remove_event "$server_evts" "$REMOVED" "$server4_token" "$client_addr_id"
@@ -424,7 +427,7 @@ test_remove()
:>"$server_evts"
ip netns exec "$ns2" ./pm_nl_ctl rem token "$client6_token" id\
$client_addr_id
- print_test "RM_ADDR6 id:${client_addr_id} ns2 => ns1"
+ print_test "RM_ADDR6 id:client-1 ns2 => ns1"
sleep 0.5
verify_remove_event "$server_evts" "$REMOVED" "$server6_token" "$client_addr_id"
@@ -434,7 +437,7 @@ test_remove()
# RM_ADDR from the server to client machine
ip netns exec "$ns1" ./pm_nl_ctl rem token "$server4_token" id\
$server_addr_id
- print_test "RM_ADDR id:${server_addr_id} ns1 => ns2"
+ print_test "RM_ADDR id:server ns1 => ns2"
sleep 0.5
verify_remove_event "$client_evts" "$REMOVED" "$client4_token" "$server_addr_id"
@@ -443,7 +446,7 @@ test_remove()
server_addr_id=$(( server_addr_id - 1 ))
ip netns exec "$ns1" ./pm_nl_ctl rem token "$server4_token" id\
$server_addr_id
- print_test "RM_ADDR id:${server_addr_id} ns1 => ns2"
+ print_test "RM_ADDR id:server-1 ns1 => ns2"
sleep 0.5
verify_remove_event "$client_evts" "$REMOVED" "$client4_token" "$server_addr_id"
@@ -451,7 +454,7 @@ test_remove()
:>"$client_evts"
ip netns exec "$ns1" ./pm_nl_ctl rem token "$server6_token" id\
$server_addr_id
- print_test "RM_ADDR6 id:${server_addr_id} ns1 => ns2"
+ print_test "RM_ADDR6 id:server-1 ns1 => ns2"
sleep 0.5
verify_remove_event "$client_evts" "$REMOVED" "$client6_token" "$server_addr_id"
}
@@ -479,8 +482,14 @@ verify_subflow_events()
local locid
local remid
local info
+ local e_dport_txt
- info="${e_saddr} (${e_from}) => ${e_daddr}:${e_dport} (${e_to})"
+ # only display the fixed ports
+ if [ "${e_dport}" -ge "${app4_port}" ] && [ "${e_dport}" -le "${app6_port}" ]; then
+ e_dport_txt=":${e_dport}"
+ fi
+
+ info="${e_saddr} (${e_from}) => ${e_daddr}${e_dport_txt} (${e_to})"
if [ "$e_type" = "$SUB_ESTABLISHED" ]
then
@@ -766,7 +775,7 @@ test_subflows_v4_v6_mix()
:>"$client_evts"
ip netns exec "$ns1" ./pm_nl_ctl ann 10.0.2.1 token "$server6_token" id\
$server_addr_id dev ns1eth2
- print_test "ADD_ADDR4 id:${server_addr_id} 10.0.2.1 (ns1) => ns2, reuse port"
+ print_test "ADD_ADDR4 id:server 10.0.2.1 (ns1) => ns2, reuse port"
sleep 0.5
verify_announce_event "$client_evts" "$ANNOUNCED" "$client6_token" "10.0.2.1"\
"$server_addr_id" "$app6_port"
@@ -861,7 +870,7 @@ test_listener()
local listener_pid=$!
sleep 0.5
- print_test "CREATE_LISTENER 10.0.2.2:$client4_port"
+ print_test "CREATE_LISTENER 10.0.2.2 (client port)"
verify_listener_events $client_evts $LISTENER_CREATED $AF_INET 10.0.2.2 $client4_port
# ADD_ADDR from client to server machine reusing the subflow port
@@ -878,13 +887,14 @@ test_listener()
mptcp_lib_kill_wait $listener_pid
sleep 0.5
- print_test "CLOSE_LISTENER 10.0.2.2:$client4_port"
+ print_test "CLOSE_LISTENER 10.0.2.2 (client port)"
verify_listener_events $client_evts $LISTENER_CLOSED $AF_INET 10.0.2.2 $client4_port
}
print_title "Make connections"
make_connection
make_connection "v6"
+print_title "Will be using address IDs ${client_addr_id} (client) and ${server_addr_id} (server)"
test_announce
test_remove
diff --git a/tools/testing/selftests/net/openvswitch/openvswitch.sh b/tools/testing/selftests/net/openvswitch/openvswitch.sh
index 5cae53543849..15bca0708717 100755
--- a/tools/testing/selftests/net/openvswitch/openvswitch.sh
+++ b/tools/testing/selftests/net/openvswitch/openvswitch.sh
@@ -1,4 +1,4 @@
-#!/bin/sh
+#!/bin/bash
# SPDX-License-Identifier: GPL-2.0
#
# OVS kernel module self tests
diff --git a/tools/testing/selftests/net/openvswitch/ovs-dpctl.py b/tools/testing/selftests/net/openvswitch/ovs-dpctl.py
index 1dd057afd3fb..9f8dec2f6539 100644
--- a/tools/testing/selftests/net/openvswitch/ovs-dpctl.py
+++ b/tools/testing/selftests/net/openvswitch/ovs-dpctl.py
@@ -531,7 +531,7 @@ class ovsactions(nla):
for flat_act in parse_flat_map:
if parse_starts_block(actstr, flat_act[0], False):
actstr = actstr[len(flat_act[0]):]
- self["attrs"].append([flat_act[1]])
+ self["attrs"].append([flat_act[1], True])
actstr = actstr[strspn(actstr, ", ") :]
parsed = True
diff --git a/tools/testing/selftests/net/srv6_end_dx4_netfilter_test.sh b/tools/testing/selftests/net/srv6_end_dx4_netfilter_test.sh
new file mode 100755
index 000000000000..e23210aa547f
--- /dev/null
+++ b/tools/testing/selftests/net/srv6_end_dx4_netfilter_test.sh
@@ -0,0 +1,335 @@
+#!/bin/bash
+# SPDX-License-Identifier: GPL-2.0
+#
+# author: Jianguo Wu <wujianguo@chinatelecom.cn>
+#
+# Mostly copied from tools/testing/selftests/net/srv6_end_dt4_l3vpn_test.sh.
+#
+# This script is designed for testing the support of netfilter hooks for
+# SRv6 End.DX4 behavior.
+#
+# Hereafter a network diagram is shown, where one tenants (named 100) offer
+# IPv4 L3 VPN services allowing hosts to communicate with each other across
+# an IPv6 network.
+#
+# Routers rt-1 and rt-2 implement IPv4 L3 VPN services leveraging the SRv6
+# architecture. The key components for such VPNs are: a) SRv6 Encap behavior,
+# b) SRv6 End.DX4 behavior.
+#
+# To explain how an IPv4 L3 VPN based on SRv6 works, let us briefly consider an
+# example where, within the same domain of tenant 100, the host hs-1 pings
+# the host hs-2.
+#
+# First of all, L2 reachability of the host hs-2 is taken into account by
+# the router rt-1 which acts as an arp proxy.
+#
+# When the host hs-1 sends an IPv4 packet destined to hs-2, the router rt-1
+# receives the packet on the internal veth-t100 interface, rt-1 contains the
+# SRv6 Encap route for encapsulating the IPv4 packet in a IPv6 plus the Segment
+# Routing Header (SRH) packet. This packet is sent through the (IPv6) core
+# network up to the router rt-2 that receives it on veth0 interface.
+#
+# The rt-2 router uses the 'localsid' routing table to process incoming
+# IPv6+SRH packets which belong to the VPN of the tenant 100. For each of these
+# packets, the SRv6 End.DX4 behavior removes the outer IPv6+SRH headers and
+# routs the packet to the specified nexthop. Afterwards, the packet is sent to
+# the host hs-2 through the veth-t100 interface.
+#
+# The ping response follows the same processing but this time the role of rt-1
+# and rt-2 are swapped.
+#
+# And when net.netfilter.nf_hooks_lwtunnel is set to 1 in rt-1 or rt-2, and a
+# rpfilter iptables rule is added, SRv6 packets will go through netfilter PREROUTING
+# hooks.
+#
+#
+# +-------------------+ +-------------------+
+# | | | |
+# | hs-1 netns | | hs-2 netns |
+# | | | |
+# | +-------------+ | | +-------------+ |
+# | | veth0 | | | | veth0 | |
+# | | 10.0.0.1/24 | | | | 10.0.0.2/24 | |
+# | +-------------+ | | +-------------+ |
+# | . | | . |
+# +-------------------+ +-------------------+
+# . .
+# . .
+# . .
+# +-----------------------------------+ +-----------------------------------+
+# | . | | . |
+# | +---------------+ | | +---------------- |
+# | | veth-t100 | | | | veth-t100 | |
+# | | 10.0.0.11/24 | +----------+ | | +----------+ | 10.0.0.22/24 | |
+# | +-------+-------+ | route | | | | route | +-------+-------- |
+# | | table | | | | table | |
+# | +----------+ | | +----------+ |
+# | +--------------+ | | +--------------+ |
+# | | veth0 | | | | veth0 | |
+# | | 2001:11::1/64 |.|...|.| 2001:11::2/64 | |
+# | +--------------+ | | +--------------+ |
+# | | | |
+# | rt-1 netns | | rt-2 netns |
+# | | | |
+# +-----------------------------------+ +-----------------------------------+
+#
+# ~~~~~~~~~~~~~~~~~~~~~~~~~
+# | Network configuration |
+# ~~~~~~~~~~~~~~~~~~~~~~~~~
+#
+# rt-1: localsid table
+# +----------------------------------------------------------------+
+# |SID |Action |
+# +----------------------------------------------------------------+
+# |fc00:21:100::6004|apply SRv6 End.DX4 nh4 10.0.0.1 dev veth-t100 |
+# +----------------------------------------------------------------+
+#
+# rt-1: route table
+# +---------------------------------------------------+
+# |host |Action |
+# +---------------------------------------------------+
+# |10.0.0.2 |apply seg6 encap segs fc00:12:100::6004|
+# +---------------------------------------------------+
+# |10.0.0.0/24|forward to dev veth_t100 |
+# +---------------------------------------------------+
+#
+#
+# rt-2: localsid table
+# +---------------------------------------------------------------+
+# |SID |Action |
+# +---------------------------------------------------------------+
+# |fc00:12:100::6004|apply SRv6 End.DX4 nh4 10.0.0.2 dev veth-t100|
+# +---------------------------------------------------------------+
+#
+# rt-2: route table
+# +---------------------------------------------------+
+# |host |Action |
+# +---------------------------------------------------+
+# |10.0.0.1 |apply seg6 encap segs fc00:21:100::6004|
+# +---------------------------------------------------+
+# |10.0.0.0/24|forward to dev veth_t100 |
+# +---------------------------------------------------+
+#
+
+# Kselftest framework requirement - SKIP code is 4.
+ksft_skip=4
+
+readonly IPv6_RT_NETWORK=2001:11
+readonly IPv4_HS_NETWORK=10.0.0
+readonly SID_LOCATOR=fc00
+
+PING_TIMEOUT_SEC=4
+
+ret=0
+
+PAUSE_ON_FAIL=${PAUSE_ON_FAIL:=no}
+
+log_test()
+{
+ local rc=$1
+ local expected=$2
+ local msg="$3"
+
+ if [ ${rc} -eq ${expected} ]; then
+ nsuccess=$((nsuccess+1))
+ printf "\n TEST: %-60s [ OK ]\n" "${msg}"
+ else
+ ret=1
+ nfail=$((nfail+1))
+ printf "\n TEST: %-60s [FAIL]\n" "${msg}"
+ if [ "${PAUSE_ON_FAIL}" = "yes" ]; then
+ echo
+ echo "hit enter to continue, 'q' to quit"
+ read a
+ [ "$a" = "q" ] && exit 1
+ fi
+ fi
+}
+
+print_log_test_results()
+{
+ if [ "$TESTS" != "none" ]; then
+ printf "\nTests passed: %3d\n" ${nsuccess}
+ printf "Tests failed: %3d\n" ${nfail}
+ fi
+}
+
+log_section()
+{
+ echo
+ echo "################################################################################"
+ echo "TEST SECTION: $*"
+ echo "################################################################################"
+}
+
+cleanup()
+{
+ ip link del veth-rt-1 2>/dev/null || true
+ ip link del veth-rt-2 2>/dev/null || true
+
+ # destroy routers rt-* and hosts hs-*
+ for ns in $(ip netns show | grep -E 'rt-*|hs-*'); do
+ ip netns del ${ns} || true
+ done
+}
+
+# Setup the basic networking for the routers
+setup_rt_networking()
+{
+ local rt=$1
+ local nsname=rt-${rt}
+
+ ip netns add ${nsname}
+
+ ip netns exec ${nsname} sysctl -wq net.ipv6.conf.all.accept_dad=0
+ ip netns exec ${nsname} sysctl -wq net.ipv6.conf.default.accept_dad=0
+
+ ip link set veth-rt-${rt} netns ${nsname}
+ ip -netns ${nsname} link set veth-rt-${rt} name veth0
+
+ ip -netns ${nsname} addr add ${IPv6_RT_NETWORK}::${rt}/64 dev veth0 nodad
+ ip -netns ${nsname} link set veth0 up
+ ip -netns ${nsname} link set lo up
+
+ ip netns exec ${nsname} sysctl -wq net.ipv4.ip_forward=1
+ ip netns exec ${nsname} sysctl -wq net.ipv6.conf.all.forwarding=1
+}
+
+setup_rt_netfilter()
+{
+ local rt=$1
+ local nsname=rt-${rt}
+
+ ip netns exec ${nsname} sysctl -wq net.netfilter.nf_hooks_lwtunnel=1
+ ip netns exec ${nsname} iptables -t raw -A PREROUTING -m rpfilter --invert -j DROP
+}
+
+setup_hs()
+{
+ local hs=$1
+ local rt=$2
+ local tid=$3
+ local hsname=hs-${hs}
+ local rtname=rt-${rt}
+ local rtveth=veth-t${tid}
+
+ # set the networking for the host
+ ip netns add ${hsname}
+
+ ip -netns ${hsname} link add veth0 type veth peer name ${rtveth}
+ ip -netns ${hsname} link set ${rtveth} netns ${rtname}
+ ip -netns ${hsname} addr add ${IPv4_HS_NETWORK}.${hs}/24 dev veth0
+ ip -netns ${hsname} link set veth0 up
+ ip -netns ${hsname} link set lo up
+
+ ip -netns ${rtname} addr add ${IPv4_HS_NETWORK}.${rt}${hs}/24 dev ${rtveth}
+ ip -netns ${rtname} link set ${rtveth} up
+
+ ip netns exec ${rtname} sysctl -wq net.ipv4.conf.${rtveth}.proxy_arp=1
+}
+
+setup_vpn_config()
+{
+ local hssrc=$1
+ local rtsrc=$2
+ local hsdst=$3
+ local rtdst=$4
+ local tid=$5
+
+ local hssrc_name=hs-t${tid}-${hssrc}
+ local hsdst_name=hs-t${tid}-${hsdst}
+ local rtsrc_name=rt-${rtsrc}
+ local rtdst_name=rt-${rtdst}
+ local vpn_sid=${SID_LOCATOR}:${hssrc}${hsdst}:${tid}::6004
+
+ # set the encap route for encapsulating packets which arrive from the
+ # host hssrc and destined to the access router rtsrc.
+ ip -netns ${rtsrc_name} -4 route add ${IPv4_HS_NETWORK}.${hsdst}/32 \
+ encap seg6 mode encap segs ${vpn_sid} dev veth0
+ ip -netns ${rtsrc_name} -6 route add ${vpn_sid}/128 \
+ via 2001:11::${rtdst} dev veth0
+
+ # set the decap route for decapsulating packets which arrive from
+ # the rtdst router and destined to the hsdst host.
+ ip -netns ${rtdst_name} -6 route add ${vpn_sid}/128 \
+ encap seg6local action End.DX4 nh4 ${IPv4_HS_NETWORK}.${hsdst} dev veth-t${tid}
+}
+
+setup()
+{
+ ip link add veth-rt-1 type veth peer name veth-rt-2
+ # setup the networking for router rt-1 and router rt-2
+ setup_rt_networking 1
+ setup_rt_networking 2
+
+ # setup two hosts for the tenant 100.
+ # - host hs-1 is directly connected to the router rt-1;
+ # - host hs-2 is directly connected to the router rt-2.
+ setup_hs 1 1 100
+ setup_hs 2 2 100
+
+ # setup the IPv4 L3 VPN which connects the host hs-1 and host hs-2.
+ setup_vpn_config 1 1 2 2 100 #args: src_host src_router dst_host dst_router tenant
+ setup_vpn_config 2 2 1 1 100
+}
+
+check_hs_connectivity()
+{
+ local hssrc=$1
+ local hsdst=$2
+ local tid=$3
+
+ ip netns exec hs-${hssrc} ping -c 1 -W ${PING_TIMEOUT_SEC} \
+ ${IPv4_HS_NETWORK}.${hsdst} >/dev/null 2>&1
+}
+
+check_and_log_hs_connectivity()
+{
+ local hssrc=$1
+ local hsdst=$2
+ local tid=$3
+
+ check_hs_connectivity ${hssrc} ${hsdst} ${tid}
+ log_test $? 0 "Hosts connectivity: hs-${hssrc} -> hs-${hsdst} (tenant ${tid})"
+}
+
+host_tests()
+{
+ log_section "SRv6 VPN connectivity test among hosts in the same tenant"
+
+ check_and_log_hs_connectivity 1 2 100
+ check_and_log_hs_connectivity 2 1 100
+}
+
+router_netfilter_tests()
+{
+ log_section "SRv6 VPN connectivity test with netfilter enabled in routers"
+ setup_rt_netfilter 1
+ setup_rt_netfilter 2
+
+ check_and_log_hs_connectivity 1 2 100
+ check_and_log_hs_connectivity 2 1 100
+}
+
+if [ "$(id -u)" -ne 0 ];then
+ echo "SKIP: Need root privileges"
+ exit $ksft_skip
+fi
+
+if [ ! -x "$(command -v ip)" ]; then
+ echo "SKIP: Could not run test without ip tool"
+ exit $ksft_skip
+fi
+
+cleanup &>/dev/null
+
+setup
+
+host_tests
+router_netfilter_tests
+
+print_log_test_results
+
+cleanup &>/dev/null
+
+exit ${ret}
diff --git a/tools/testing/selftests/net/srv6_end_dx6_netfilter_test.sh b/tools/testing/selftests/net/srv6_end_dx6_netfilter_test.sh
new file mode 100755
index 000000000000..9e69a2ed5bc3
--- /dev/null
+++ b/tools/testing/selftests/net/srv6_end_dx6_netfilter_test.sh
@@ -0,0 +1,340 @@
+#!/bin/bash
+# SPDX-License-Identifier: GPL-2.0
+#
+# author: Jianguo Wu <wujianguo@chinatelecom.cn>
+#
+# Mostly copied from tools/testing/selftests/net/srv6_end_dt6_l3vpn_test.sh.
+#
+# This script is designed for testing the support of netfilter hooks for
+# SRv6 End.DX4 behavior.
+#
+# Hereafter a network diagram is shown, where one tenants (named 100) offer
+# IPv6 L3 VPN services allowing hosts to communicate with each other across
+# an IPv6 network.
+#
+# Routers rt-1 and rt-2 implement IPv6 L3 VPN services leveraging the SRv6
+# architecture. The key components for such VPNs are: a) SRv6 Encap behavior,
+# b) SRv6 End.DX4 behavior.
+#
+# To explain how an IPv6 L3 VPN based on SRv6 works, let us briefly consider an
+# example where, within the same domain of tenant 100, the host hs-1 pings
+# the host hs-2.
+#
+# First of all, L2 reachability of the host hs-2 is taken into account by
+# the router rt-1 which acts as an arp proxy.
+#
+# When the host hs-1 sends an IPv6 packet destined to hs-2, the router rt-1
+# receives the packet on the internal veth-t100 interface, rt-1 contains the
+# SRv6 Encap route for encapsulating the IPv6 packet in a IPv6 plus the Segment
+# Routing Header (SRH) packet. This packet is sent through the (IPv6) core
+# network up to the router rt-2 that receives it on veth0 interface.
+#
+# The rt-2 router uses the 'localsid' routing table to process incoming
+# IPv6+SRH packets which belong to the VPN of the tenant 100. For each of these
+# packets, the SRv6 End.DX4 behavior removes the outer IPv6+SRH headers and
+# routs the packet to the specified nexthop. Afterwards, the packet is sent to
+# the host hs-2 through the veth-t100 interface.
+#
+# The ping response follows the same processing but this time the role of rt-1
+# and rt-2 are swapped.
+#
+# And when net.netfilter.nf_hooks_lwtunnel is set to 1 in rt-1 or rt-2, and a
+# rpfilter iptables rule is added, SRv6 packets will go through netfilter PREROUTING
+# hooks.
+#
+#
+# +-------------------+ +-------------------+
+# | | | |
+# | hs-1 netns | | hs-2 netns |
+# | | | |
+# | +-------------+ | | +-------------+ |
+# | | veth0 | | | | veth0 | |
+# | | cafe::1/64 | | | | cafe::2/64 | |
+# | +-------------+ | | +-------------+ |
+# | . | | . |
+# +-------------------+ +-------------------+
+# . .
+# . .
+# . .
+# +-----------------------------------+ +-----------------------------------+
+# | . | | . |
+# | +---------------+ | | +---------------- |
+# | | veth-t100 | | | | veth-t100 | |
+# | | cafe::11/64 | +----------+ | | +----------+ | cafe::22/64 | |
+# | +-------+-------+ | route | | | | route | +-------+-------- |
+# | | table | | | | table | |
+# | +----------+ | | +----------+ |
+# | +--------------+ | | +--------------+ |
+# | | veth0 | | | | veth0 | |
+# | | 2001:11::1/64 |.|...|.| 2001:11::2/64 | |
+# | +--------------+ | | +--------------+ |
+# | | | |
+# | rt-1 netns | | rt-2 netns |
+# | | | |
+# +-----------------------------------+ +-----------------------------------+
+#
+# ~~~~~~~~~~~~~~~~~~~~~~~~~
+# | Network configuration |
+# ~~~~~~~~~~~~~~~~~~~~~~~~~
+#
+# rt-1: localsid table
+# +----------------------------------------------------------------+
+# |SID |Action |
+# +----------------------------------------------------------------+
+# |fc00:21:100::6004|apply SRv6 End.DX6 nh6 cafe::1 dev veth-t100 |
+# +----------------------------------------------------------------+
+#
+# rt-1: route table
+# +---------------------------------------------------+
+# |host |Action |
+# +---------------------------------------------------+
+# |cafe::2 |apply seg6 encap segs fc00:12:100::6004|
+# +---------------------------------------------------+
+# |cafe::/64 |forward to dev veth_t100 |
+# +---------------------------------------------------+
+#
+#
+# rt-2: localsid table
+# +---------------------------------------------------------------+
+# |SID |Action |
+# +---------------------------------------------------------------+
+# |fc00:12:100::6004|apply SRv6 End.DX6 nh6 cafe::2 dev veth-t100 |
+# +---------------------------------------------------------------+
+#
+# rt-2: route table
+# +---------------------------------------------------+
+# |host |Action |
+# +---------------------------------------------------+
+# |cafe::1 |apply seg6 encap segs fc00:21:100::6004|
+# +---------------------------------------------------+
+# |cafe::/64 |forward to dev veth_t100 |
+# +---------------------------------------------------+
+#
+
+# Kselftest framework requirement - SKIP code is 4.
+ksft_skip=4
+
+readonly IPv6_RT_NETWORK=2001:11
+readonly IPv6_HS_NETWORK=cafe
+readonly SID_LOCATOR=fc00
+
+PING_TIMEOUT_SEC=4
+
+ret=0
+
+PAUSE_ON_FAIL=${PAUSE_ON_FAIL:=no}
+
+log_test()
+{
+ local rc=$1
+ local expected=$2
+ local msg="$3"
+
+ if [ ${rc} -eq ${expected} ]; then
+ nsuccess=$((nsuccess+1))
+ printf "\n TEST: %-60s [ OK ]\n" "${msg}"
+ else
+ ret=1
+ nfail=$((nfail+1))
+ printf "\n TEST: %-60s [FAIL]\n" "${msg}"
+ if [ "${PAUSE_ON_FAIL}" = "yes" ]; then
+ echo
+ echo "hit enter to continue, 'q' to quit"
+ read a
+ [ "$a" = "q" ] && exit 1
+ fi
+ fi
+}
+
+print_log_test_results()
+{
+ if [ "$TESTS" != "none" ]; then
+ printf "\nTests passed: %3d\n" ${nsuccess}
+ printf "Tests failed: %3d\n" ${nfail}
+ fi
+}
+
+log_section()
+{
+ echo
+ echo "################################################################################"
+ echo "TEST SECTION: $*"
+ echo "################################################################################"
+}
+
+cleanup()
+{
+ ip link del veth-rt-1 2>/dev/null || true
+ ip link del veth-rt-2 2>/dev/null || true
+
+ # destroy routers rt-* and hosts hs-*
+ for ns in $(ip netns show | grep -E 'rt-*|hs-*'); do
+ ip netns del ${ns} || true
+ done
+}
+
+# Setup the basic networking for the routers
+setup_rt_networking()
+{
+ local rt=$1
+ local nsname=rt-${rt}
+
+ ip netns add ${nsname}
+
+ ip netns exec ${nsname} sysctl -wq net.ipv6.conf.all.accept_dad=0
+ ip netns exec ${nsname} sysctl -wq net.ipv6.conf.default.accept_dad=0
+
+ ip link set veth-rt-${rt} netns ${nsname}
+ ip -netns ${nsname} link set veth-rt-${rt} name veth0
+
+ ip -netns ${nsname} addr add ${IPv6_RT_NETWORK}::${rt}/64 dev veth0 nodad
+ ip -netns ${nsname} link set veth0 up
+ ip -netns ${nsname} link set lo up
+
+ ip netns exec ${nsname} sysctl -wq net.ipv6.conf.all.forwarding=1
+}
+
+setup_rt_netfilter()
+{
+ local rt=$1
+ local nsname=rt-${rt}
+
+ ip netns exec ${nsname} sysctl -wq net.netfilter.nf_hooks_lwtunnel=1
+ ip netns exec ${nsname} ip6tables -t raw -A PREROUTING -m rpfilter --invert -j DROP
+}
+
+setup_hs()
+{
+ local hs=$1
+ local rt=$2
+ local tid=$3
+ local hsname=hs-${hs}
+ local rtname=rt-${rt}
+ local rtveth=veth-t${tid}
+
+ # set the networking for the host
+ ip netns add ${hsname}
+
+ ip -netns ${hsname} link add veth0 type veth peer name ${rtveth}
+ ip -netns ${hsname} link set ${rtveth} netns ${rtname}
+ ip -netns ${hsname} addr add ${IPv6_HS_NETWORK}::${hs}/64 dev veth0 nodad
+ ip -netns ${hsname} link set veth0 up
+ ip -netns ${hsname} link set lo up
+
+ ip -netns ${rtname} addr add ${IPv6_HS_NETWORK}::${rt}${hs}/64 dev ${rtveth}
+ ip -netns ${rtname} link set ${rtveth} up
+
+ ip netns exec ${rtname} sysctl -wq net.ipv6.conf.all.accept_dad=0
+ ip netns exec ${rtname} sysctl -wq net.ipv6.conf.default.accept_dad=0
+
+ ip netns exec ${rtname} sysctl -wq net.ipv6.conf.${rtveth}.proxy_ndp=1
+}
+
+setup_vpn_config()
+{
+ local hssrc=$1
+ local rtsrc=$2
+ local hsdst=$3
+ local rtdst=$4
+ local tid=$5
+
+ local hssrc_name=hs-t${tid}-${hssrc}
+ local hsdst_name=hs-t${tid}-${hsdst}
+ local rtsrc_name=rt-${rtsrc}
+ local rtdst_name=rt-${rtdst}
+ local rtveth=veth-t${tid}
+ local vpn_sid=${SID_LOCATOR}:${hssrc}${hsdst}:${tid}::6004
+
+ ip -netns ${rtsrc_name} -6 neigh add proxy ${IPv6_HS_NETWORK}::${hsdst} dev ${rtveth}
+
+ # set the encap route for encapsulating packets which arrive from the
+ # host hssrc and destined to the access router rtsrc.
+ ip -netns ${rtsrc_name} -6 route add ${IPv6_HS_NETWORK}::${hsdst}/128 \
+ encap seg6 mode encap segs ${vpn_sid} dev veth0
+ ip -netns ${rtsrc_name} -6 route add ${vpn_sid}/128 \
+ via 2001:11::${rtdst} dev veth0
+
+ # set the decap route for decapsulating packets which arrive from
+ # the rtdst router and destined to the hsdst host.
+ ip -netns ${rtdst_name} -6 route add ${vpn_sid}/128 \
+ encap seg6local action End.DX6 nh6 ${IPv6_HS_NETWORK}::${hsdst} dev veth-t${tid}
+}
+
+setup()
+{
+ ip link add veth-rt-1 type veth peer name veth-rt-2
+ # setup the networking for router rt-1 and router rt-2
+ setup_rt_networking 1
+ setup_rt_networking 2
+
+ # setup two hosts for the tenant 100.
+ # - host hs-1 is directly connected to the router rt-1;
+ # - host hs-2 is directly connected to the router rt-2.
+ setup_hs 1 1 100
+ setup_hs 2 2 100
+
+ # setup the IPv4 L3 VPN which connects the host hs-1 and host hs-2.
+ setup_vpn_config 1 1 2 2 100 #args: src_host src_router dst_host dst_router tenant
+ setup_vpn_config 2 2 1 1 100
+}
+
+check_hs_connectivity()
+{
+ local hssrc=$1
+ local hsdst=$2
+ local tid=$3
+
+ ip netns exec hs-${hssrc} ping -6 -c 1 -W ${PING_TIMEOUT_SEC} \
+ ${IPv6_HS_NETWORK}::${hsdst} >/dev/null 2>&1
+}
+
+check_and_log_hs_connectivity()
+{
+ local hssrc=$1
+ local hsdst=$2
+ local tid=$3
+
+ check_hs_connectivity ${hssrc} ${hsdst} ${tid}
+ log_test $? 0 "Hosts connectivity: hs-${hssrc} -> hs-${hsdst} (tenant ${tid})"
+}
+
+host_tests()
+{
+ log_section "SRv6 VPN connectivity test among hosts in the same tenant"
+
+ check_and_log_hs_connectivity 1 2 100
+ check_and_log_hs_connectivity 2 1 100
+}
+
+router_netfilter_tests()
+{
+ log_section "SRv6 VPN connectivity test with netfilter enabled in routers"
+ setup_rt_netfilter 1
+ setup_rt_netfilter 2
+
+ check_and_log_hs_connectivity 1 2 100
+ check_and_log_hs_connectivity 2 1 100
+}
+
+if [ "$(id -u)" -ne 0 ];then
+ echo "SKIP: Need root privileges"
+ exit $ksft_skip
+fi
+
+if [ ! -x "$(command -v ip)" ]; then
+ echo "SKIP: Could not run test without ip tool"
+ exit $ksft_skip
+fi
+
+cleanup &>/dev/null
+
+setup
+
+host_tests
+router_netfilter_tests
+
+print_log_test_results
+
+cleanup &>/dev/null
+
+exit ${ret}
diff --git a/tools/testing/selftests/openat2/Makefile b/tools/testing/selftests/openat2/Makefile
index 254d676a2689..185dc76ebb5f 100644
--- a/tools/testing/selftests/openat2/Makefile
+++ b/tools/testing/selftests/openat2/Makefile
@@ -1,8 +1,18 @@
# SPDX-License-Identifier: GPL-2.0-or-later
-CFLAGS += -Wall -O2 -g -fsanitize=address -fsanitize=undefined -static-libasan
+CFLAGS += -Wall -O2 -g -fsanitize=address -fsanitize=undefined
TEST_GEN_PROGS := openat2_test resolve_test rename_attack_test
+# gcc requires -static-libasan in order to ensure that Address Sanitizer's
+# library is the first one loaded. However, clang already statically links the
+# Address Sanitizer if -fsanitize is specified. Therefore, simply omit
+# -static-libasan for clang builds.
+ifeq ($(LLVM),)
+ CFLAGS += -static-libasan
+endif
+
+LOCAL_HDRS += helpers.h
+
include ../lib.mk
-$(TEST_GEN_PROGS): helpers.c helpers.h
+$(TEST_GEN_PROGS): helpers.c
diff --git a/tools/testing/selftests/seccomp/seccomp_benchmark.c b/tools/testing/selftests/seccomp/seccomp_benchmark.c
index b83099160fbc..94886c82ae60 100644
--- a/tools/testing/selftests/seccomp/seccomp_benchmark.c
+++ b/tools/testing/selftests/seccomp/seccomp_benchmark.c
@@ -194,14 +194,14 @@ int main(int argc, char *argv[])
ksft_set_plan(7);
ksft_print_msg("Running on:\n");
- ksft_print_msg("");
+ ksft_print_msg("%s", "");
system("uname -a");
ksft_print_msg("Current BPF sysctl settings:\n");
/* Avoid using "sysctl" which may not be installed. */
- ksft_print_msg("");
+ ksft_print_msg("%s", "");
system("grep -H . /proc/sys/net/core/bpf_jit_enable");
- ksft_print_msg("");
+ ksft_print_msg("%s", "");
system("grep -H . /proc/sys/net/core/bpf_jit_harden");
affinity();
generated by cgit v1.2.3 (git 2.39.0) at 2024-11-19 16:20:31 +0300