diff options
Diffstat (limited to 'kernel/trace')
| -rw-r--r-- | kernel/trace/Kconfig | 35 | ||||
| -rw-r--r-- | kernel/trace/Makefile | 1 | ||||
| -rw-r--r-- | kernel/trace/ftrace.c | 6 | ||||
| -rw-r--r-- | kernel/trace/trace.c | 8 | ||||
| -rw-r--r-- | kernel/trace/trace.h | 5 | ||||
| -rw-r--r-- | kernel/trace/trace_entries.h | 27 | ||||
| -rw-r--r-- | kernel/trace/trace_events_trigger.c | 1 | ||||
| -rw-r--r-- | kernel/trace/trace_functions_graph.c | 6 | ||||
| -rw-r--r-- | kernel/trace/trace_hwlat.c | 633 | ||||
| -rw-r--r-- | kernel/trace/trace_output.c | 66 | ||||
| -rw-r--r-- | kernel/trace/trace_uprobe.c | 4 |
11 files changed, 783 insertions, 9 deletions
diff --git a/kernel/trace/Kconfig b/kernel/trace/Kconfig index ba3326785ca4..2a96b063d659 100644 --- a/kernel/trace/Kconfig +++ b/kernel/trace/Kconfig @@ -216,6 +216,41 @@ config SCHED_TRACER This tracer tracks the latency of the highest priority task to be scheduled in, starting from the point it has woken up. +config HWLAT_TRACER + bool "Tracer to detect hardware latencies (like SMIs)" + select GENERIC_TRACER + help + This tracer, when enabled will create one or more kernel threads, + depening on what the cpumask file is set to, which each thread + spinning in a loop looking for interruptions caused by + something other than the kernel. For example, if a + System Management Interrupt (SMI) takes a noticeable amount of + time, this tracer will detect it. This is useful for testing + if a system is reliable for Real Time tasks. + + Some files are created in the tracing directory when this + is enabled: + + hwlat_detector/width - time in usecs for how long to spin for + hwlat_detector/window - time in usecs between the start of each + iteration + + A kernel thread is created that will spin with interrupts disabled + for "width" microseconds in every "widow" cycle. It will not spin + for "window - width" microseconds, where the system can + continue to operate. + + The output will appear in the trace and trace_pipe files. + + When the tracer is not running, it has no affect on the system, + but when it is running, it can cause the system to be + periodically non responsive. Do not run this tracer on a + production system. + + To enable this tracer, echo in "hwlat" into the current_tracer + file. Every time a latency is greater than tracing_thresh, it will + be recorded into the ring buffer. + config ENABLE_DEFAULT_TRACERS bool "Trace process context switches and events" depends on !GENERIC_TRACER diff --git a/kernel/trace/Makefile b/kernel/trace/Makefile index d0a1617b52b4..992ab9d99f35 100644 --- a/kernel/trace/Makefile +++ b/kernel/trace/Makefile @@ -41,6 +41,7 @@ obj-$(CONFIG_FUNCTION_TRACER) += trace_functions.o obj-$(CONFIG_IRQSOFF_TRACER) += trace_irqsoff.o obj-$(CONFIG_PREEMPT_TRACER) += trace_irqsoff.o obj-$(CONFIG_SCHED_TRACER) += trace_sched_wakeup.o +obj-$(CONFIG_HWLAT_TRACER) += trace_hwlat.o obj-$(CONFIG_NOP_TRACER) += trace_nop.o obj-$(CONFIG_STACK_TRACER) += trace_stack.o obj-$(CONFIG_MMIOTRACE) += trace_mmiotrace.o diff --git a/kernel/trace/ftrace.c b/kernel/trace/ftrace.c index 84752c8e28b5..2050a7652a86 100644 --- a/kernel/trace/ftrace.c +++ b/kernel/trace/ftrace.c @@ -872,7 +872,13 @@ function_profile_call(unsigned long ip, unsigned long parent_ip, #ifdef CONFIG_FUNCTION_GRAPH_TRACER static int profile_graph_entry(struct ftrace_graph_ent *trace) { + int index = trace->depth; + function_profile_call(trace->func, 0, NULL, NULL); + + if (index >= 0 && index < FTRACE_RETFUNC_DEPTH) + current->ret_stack[index].subtime = 0; + return 1; } diff --git a/kernel/trace/trace.c b/kernel/trace/trace.c index 37824d98ae71..8696ce6bf2f6 100644 --- a/kernel/trace/trace.c +++ b/kernel/trace/trace.c @@ -1047,7 +1047,7 @@ void disable_trace_on_warning(void) * * Shows real state of the ring buffer if it is enabled or not. */ -static int tracer_tracing_is_on(struct trace_array *tr) +int tracer_tracing_is_on(struct trace_array *tr) { if (tr->trace_buffer.buffer) return ring_buffer_record_is_on(tr->trace_buffer.buffer); @@ -4969,7 +4969,7 @@ out: return ret; } -#ifdef CONFIG_TRACER_MAX_TRACE +#if defined(CONFIG_TRACER_MAX_TRACE) || defined(CONFIG_HWLAT_TRACER) static ssize_t tracing_max_lat_read(struct file *filp, char __user *ubuf, @@ -5892,7 +5892,7 @@ static const struct file_operations tracing_thresh_fops = { .llseek = generic_file_llseek, }; -#ifdef CONFIG_TRACER_MAX_TRACE +#if defined(CONFIG_TRACER_MAX_TRACE) || defined(CONFIG_HWLAT_TRACER) static const struct file_operations tracing_max_lat_fops = { .open = tracing_open_generic, .read = tracing_max_lat_read, @@ -7222,7 +7222,7 @@ init_tracer_tracefs(struct trace_array *tr, struct dentry *d_tracer) create_trace_options_dir(tr); -#ifdef CONFIG_TRACER_MAX_TRACE +#if defined(CONFIG_TRACER_MAX_TRACE) || defined(CONFIG_HWLAT_TRACER) trace_create_file("tracing_max_latency", 0644, d_tracer, &tr->max_latency, &tracing_max_lat_fops); #endif diff --git a/kernel/trace/trace.h b/kernel/trace/trace.h index f783df416726..fd24b1f9ac43 100644 --- a/kernel/trace/trace.h +++ b/kernel/trace/trace.h @@ -38,6 +38,7 @@ enum trace_type { TRACE_USER_STACK, TRACE_BLK, TRACE_BPUTS, + TRACE_HWLAT, __TRACE_LAST_TYPE, }; @@ -213,6 +214,8 @@ struct trace_array { */ struct trace_buffer max_buffer; bool allocated_snapshot; +#endif +#if defined(CONFIG_TRACER_MAX_TRACE) || defined(CONFIG_HWLAT_TRACER) unsigned long max_latency; #endif struct trace_pid_list __rcu *filtered_pids; @@ -326,6 +329,7 @@ extern void __ftrace_bad_type(void); IF_ASSIGN(var, ent, struct print_entry, TRACE_PRINT); \ IF_ASSIGN(var, ent, struct bprint_entry, TRACE_BPRINT); \ IF_ASSIGN(var, ent, struct bputs_entry, TRACE_BPUTS); \ + IF_ASSIGN(var, ent, struct hwlat_entry, TRACE_HWLAT); \ IF_ASSIGN(var, ent, struct trace_mmiotrace_rw, \ TRACE_MMIO_RW); \ IF_ASSIGN(var, ent, struct trace_mmiotrace_map, \ @@ -571,6 +575,7 @@ void tracing_reset_current(int cpu); void tracing_reset_all_online_cpus(void); int tracing_open_generic(struct inode *inode, struct file *filp); bool tracing_is_disabled(void); +int tracer_tracing_is_on(struct trace_array *tr); struct dentry *trace_create_file(const char *name, umode_t mode, struct dentry *parent, diff --git a/kernel/trace/trace_entries.h b/kernel/trace/trace_entries.h index 5c30efcda5e6..d1cc37e78f99 100644 --- a/kernel/trace/trace_entries.h +++ b/kernel/trace/trace_entries.h @@ -322,3 +322,30 @@ FTRACE_ENTRY(branch, trace_branch, FILTER_OTHER ); + +FTRACE_ENTRY(hwlat, hwlat_entry, + + TRACE_HWLAT, + + F_STRUCT( + __field( u64, duration ) + __field( u64, outer_duration ) + __field( u64, nmi_total_ts ) + __field_struct( struct timespec, timestamp ) + __field_desc( long, timestamp, tv_sec ) + __field_desc( long, timestamp, tv_nsec ) + __field( unsigned int, nmi_count ) + __field( unsigned int, seqnum ) + ), + + F_printk("cnt:%u\tts:%010lu.%010lu\tinner:%llu\touter:%llunmi-ts:%llu\tnmi-count:%u\n", + __entry->seqnum, + __entry->tv_sec, + __entry->tv_nsec, + __entry->duration, + __entry->outer_duration, + __entry->nmi_total_ts, + __entry->nmi_count), + + FILTER_OTHER +); diff --git a/kernel/trace/trace_events_trigger.c b/kernel/trace/trace_events_trigger.c index a975571cde24..6721a1e89f39 100644 --- a/kernel/trace/trace_events_trigger.c +++ b/kernel/trace/trace_events_trigger.c @@ -1028,6 +1028,7 @@ static struct event_command trigger_traceon_cmd = { static struct event_command trigger_traceoff_cmd = { .name = "traceoff", .trigger_type = ETT_TRACE_ONOFF, + .flags = EVENT_CMD_FL_POST_TRIGGER, .func = event_trigger_callback, .reg = register_trigger, .unreg = unregister_trigger, diff --git a/kernel/trace/trace_functions_graph.c b/kernel/trace/trace_functions_graph.c index 0cbe38a844fa..4e480e870474 100644 --- a/kernel/trace/trace_functions_graph.c +++ b/kernel/trace/trace_functions_graph.c @@ -170,7 +170,6 @@ ftrace_push_return_trace(unsigned long ret, unsigned long func, int *depth, current->ret_stack[index].ret = ret; current->ret_stack[index].func = func; current->ret_stack[index].calltime = calltime; - current->ret_stack[index].subtime = 0; #ifdef HAVE_FUNCTION_GRAPH_FP_TEST current->ret_stack[index].fp = frame_pointer; #endif @@ -1183,6 +1182,11 @@ print_graph_comment(struct trace_seq *s, struct trace_entry *ent, trace_seq_puts(s, "/* "); switch (iter->ent->type) { + case TRACE_BPUTS: + ret = trace_print_bputs_msg_only(iter); + if (ret != TRACE_TYPE_HANDLED) + return ret; + break; case TRACE_BPRINT: ret = trace_print_bprintk_msg_only(iter); if (ret != TRACE_TYPE_HANDLED) diff --git a/kernel/trace/trace_hwlat.c b/kernel/trace/trace_hwlat.c new file mode 100644 index 000000000000..b97286c48735 --- /dev/null +++ b/kernel/trace/trace_hwlat.c @@ -0,0 +1,633 @@ +/* + * trace_hwlatdetect.c - A simple Hardware Latency detector. + * + * Use this tracer to detect large system latencies induced by the behavior of + * certain underlying system hardware or firmware, independent of Linux itself. + * The code was developed originally to detect the presence of SMIs on Intel + * and AMD systems, although there is no dependency upon x86 herein. + * + * The classical example usage of this tracer is in detecting the presence of + * SMIs or System Management Interrupts on Intel and AMD systems. An SMI is a + * somewhat special form of hardware interrupt spawned from earlier CPU debug + * modes in which the (BIOS/EFI/etc.) firmware arranges for the South Bridge + * LPC (or other device) to generate a special interrupt under certain + * circumstances, for example, upon expiration of a special SMI timer device, + * due to certain external thermal readings, on certain I/O address accesses, + * and other situations. An SMI hits a special CPU pin, triggers a special + * SMI mode (complete with special memory map), and the OS is unaware. + * + * Although certain hardware-inducing latencies are necessary (for example, + * a modern system often requires an SMI handler for correct thermal control + * and remote management) they can wreak havoc upon any OS-level performance + * guarantees toward low-latency, especially when the OS is not even made + * aware of the presence of these interrupts. For this reason, we need a + * somewhat brute force mechanism to detect these interrupts. In this case, + * we do it by hogging all of the CPU(s) for configurable timer intervals, + * sampling the built-in CPU timer, looking for discontiguous readings. + * + * WARNING: This implementation necessarily introduces latencies. Therefore, + * you should NEVER use this tracer while running in a production + * environment requiring any kind of low-latency performance + * guarantee(s). + * + * Copyright (C) 2008-2009 Jon Masters, Red Hat, Inc. <jcm@redhat.com> + * Copyright (C) 2013-2016 Steven Rostedt, Red Hat, Inc. <srostedt@redhat.com> + * + * Includes useful feedback from Clark Williams <clark@redhat.com> + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ +#include <linux/kthread.h> +#include <linux/tracefs.h> +#include <linux/uaccess.h> +#include <linux/cpumask.h> +#include <linux/delay.h> +#include "trace.h" + +static struct trace_array *hwlat_trace; + +#define U64STR_SIZE 22 /* 20 digits max */ + +#define BANNER "hwlat_detector: " +#define DEFAULT_SAMPLE_WINDOW 1000000 /* 1s */ +#define DEFAULT_SAMPLE_WIDTH 500000 /* 0.5s */ +#define DEFAULT_LAT_THRESHOLD 10 /* 10us */ + +/* sampling thread*/ +static struct task_struct *hwlat_kthread; + +static struct dentry *hwlat_sample_width; /* sample width us */ +static struct dentry *hwlat_sample_window; /* sample window us */ + +/* Save the previous tracing_thresh value */ +static unsigned long save_tracing_thresh; + +/* NMI timestamp counters */ +static u64 nmi_ts_start; +static u64 nmi_total_ts; +static int nmi_count; +static int nmi_cpu; + +/* Tells NMIs to call back to the hwlat tracer to record timestamps */ +bool trace_hwlat_callback_enabled; + +/* If the user changed threshold, remember it */ +static u64 last_tracing_thresh = DEFAULT_LAT_THRESHOLD * NSEC_PER_USEC; + +/* Individual latency samples are stored here when detected. */ +struct hwlat_sample { + u64 seqnum; /* unique sequence */ + u64 duration; /* delta */ + u64 outer_duration; /* delta (outer loop) */ + u64 nmi_total_ts; /* Total time spent in NMIs */ + struct timespec timestamp; /* wall time */ + int nmi_count; /* # NMIs during this sample */ +}; + +/* keep the global state somewhere. */ +static struct hwlat_data { + + struct mutex lock; /* protect changes */ + + u64 count; /* total since reset */ + + u64 sample_window; /* total sampling window (on+off) */ + u64 sample_width; /* active sampling portion of window */ + +} hwlat_data = { + .sample_window = DEFAULT_SAMPLE_WINDOW, + .sample_width = DEFAULT_SAMPLE_WIDTH, +}; + +static void trace_hwlat_sample(struct hwlat_sample *sample) +{ + struct trace_array *tr = hwlat_trace; + struct trace_event_call *call = &event_hwlat; + struct ring_buffer *buffer = tr->trace_buffer.buffer; + struct ring_buffer_event *event; + struct hwlat_entry *entry; + unsigned long flags; + int pc; + + pc = preempt_count(); + local_save_flags(flags); + + event = trace_buffer_lock_reserve(buffer, TRACE_HWLAT, sizeof(*entry), + flags, pc); + if (!event) + return; + entry = ring_buffer_event_data(event); + entry->seqnum = sample->seqnum; + entry->duration = sample->duration; + entry->outer_duration = sample->outer_duration; + entry->timestamp = sample->timestamp; + entry->nmi_total_ts = sample->nmi_total_ts; + entry->nmi_count = sample->nmi_count; + + if (!call_filter_check_discard(call, entry, buffer, event)) + __buffer_unlock_commit(buffer, event); +} + +/* Macros to encapsulate the time capturing infrastructure */ +#define time_type u64 +#define time_get() trace_clock_local() +#define time_to_us(x) div_u64(x, 1000) +#define time_sub(a, b) ((a) - (b)) +#define init_time(a, b) (a = b) +#define time_u64(a) a + +void trace_hwlat_callback(bool enter) +{ + if (smp_processor_id() != nmi_cpu) + return; + + /* + * Currently trace_clock_local() calls sched_clock() and the + * generic version is not NMI safe. + */ + if (!IS_ENABLED(CONFIG_GENERIC_SCHED_CLOCK)) { + if (enter) + nmi_ts_start = time_get(); + else + nmi_total_ts = time_get() - nmi_ts_start; + } + + if (enter) + nmi_count++; +} + +/** + * get_sample - sample the CPU TSC and look for likely hardware latencies + * + * Used to repeatedly capture the CPU TSC (or similar), looking for potential + * hardware-induced latency. Called with interrupts disabled and with + * hwlat_data.lock held. + */ +static int get_sample(void) +{ + struct trace_array *tr = hwlat_trace; + time_type start, t1, t2, last_t2; + s64 diff, total, last_total = 0; + u64 sample = 0; + u64 thresh = tracing_thresh; + u64 outer_sample = 0; + int ret = -1; + + do_div(thresh, NSEC_PER_USEC); /* modifies interval value */ + + nmi_cpu = smp_processor_id(); + nmi_total_ts = 0; + nmi_count = 0; + /* Make sure NMIs see this first */ + barrier(); + + trace_hwlat_callback_enabled = true; + + init_time(last_t2, 0); + start = time_get(); /* start timestamp */ + + do { + + t1 = time_get(); /* we'll look for a discontinuity */ + t2 = time_get(); + + if (time_u64(last_t2)) { + /* Check the delta from outer loop (t2 to next t1) */ + diff = time_to_us(time_sub(t1, last_t2)); + /* This shouldn't happen */ + if (diff < 0) { + pr_err(BANNER "time running backwards\n"); + goto out; + } + if (diff > outer_sample) + outer_sample = diff; + } + last_t2 = t2; + + total = time_to_us(time_sub(t2, start)); /* sample width */ + + /* Check for possible overflows */ + if (total < last_total) { + pr_err("Time total overflowed\n"); + break; + } + last_total = total; + + /* This checks the inner loop (t1 to t2) */ + diff = time_to_us(time_sub(t2, t1)); /* current diff */ + + /* This shouldn't happen */ + if (diff < 0) { + pr_err(BANNER "time running backwards\n"); + goto out; + } + + if (diff > sample) + sample = diff; /* only want highest value */ + + } while (total <= hwlat_data.sample_width); + + barrier(); /* finish the above in the view for NMIs */ + trace_hwlat_callback_enabled = false; + barrier(); /* Make sure nmi_total_ts is no longer updated */ + + ret = 0; + + /* If we exceed the threshold value, we have found a hardware latency */ + if (sample > thresh || outer_sample > thresh) { + struct hwlat_sample s; + + ret = 1; + + /* We read in microseconds */ + if (nmi_total_ts) + do_div(nmi_total_ts, NSEC_PER_USEC); + + hwlat_data.count++; + s.seqnum = hwlat_data.count; + s.duration = sample; + s.outer_duration = outer_sample; + s.timestamp = CURRENT_TIME; + s.nmi_total_ts = nmi_total_ts; + s.nmi_count = nmi_count; + trace_hwlat_sample(&s); + + /* Keep a running maximum ever recorded hardware latency */ + if (sample > tr->max_latency) + tr->max_latency = sample; + } + +out: + return ret; +} + +static struct cpumask save_cpumask; +static bool disable_migrate; + +static void move_to_next_cpu(void) +{ + static struct cpumask *current_mask; + int next_cpu; + + if (disable_migrate) + return; + + /* Just pick the first CPU on first iteration */ + if (!current_mask) { + current_mask = &save_cpumask; + get_online_cpus(); + cpumask_and(current_mask, cpu_online_mask, tracing_buffer_mask); + put_online_cpus(); + next_cpu = cpumask_first(current_mask); + goto set_affinity; + } + + /* + * If for some reason the user modifies the CPU affinity + * of this thread, than stop migrating for the duration + * of the current test. + */ + if (!cpumask_equal(current_mask, ¤t->cpus_allowed)) + goto disable; + + get_online_cpus(); + cpumask_and(current_mask, cpu_online_mask, tracing_buffer_mask); + next_cpu = cpumask_next(smp_processor_id(), current_mask); + put_online_cpus(); + + if (next_cpu >= nr_cpu_ids) + next_cpu = cpumask_first(current_mask); + + set_affinity: + if (next_cpu >= nr_cpu_ids) /* Shouldn't happen! */ + goto disable; + + cpumask_clear(current_mask); + cpumask_set_cpu(next_cpu, current_mask); + + sched_setaffinity(0, current_mask); + return; + + disable: + disable_migrate = true; +} + +/* + * kthread_fn - The CPU time sampling/hardware latency detection kernel thread + * + * Used to periodically sample the CPU TSC via a call to get_sample. We + * disable interrupts, which does (intentionally) introduce latency since we + * need to ensure nothing else might be running (and thus preempting). + * Obviously this should never be used in production environments. + * + * Currently this runs on which ever CPU it was scheduled on, but most + * real-world hardware latency situations occur across several CPUs, + * but we might later generalize this if we find there are any actualy + * systems with alternate SMI delivery or other hardware latencies. + */ +static int kthread_fn(void *data) +{ + u64 interval; + + while (!kthread_should_stop()) { + + move_to_next_cpu(); + + local_irq_disable(); + get_sample(); + local_irq_enable(); + + mutex_lock(&hwlat_data.lock); + interval = hwlat_data.sample_window - hwlat_data.sample_width; + mutex_unlock(&hwlat_data.lock); + + do_div(interval, USEC_PER_MSEC); /* modifies interval value */ + + /* Always sleep for at least 1ms */ + if (interval < 1) + interval = 1; + + if (msleep_interruptible(interval)) + break; + } + + return 0; +} + +/** + * start_kthread - Kick off the hardware latency sampling/detector kthread + * + * This starts the kernel thread that will sit and sample the CPU timestamp + * counter (TSC or similar) and look for potential hardware latencies. + */ +static int start_kthread(struct trace_array *tr) +{ + struct task_struct *kthread; + + kthread = kthread_create(kthread_fn, NULL, "hwlatd"); + if (IS_ERR(kthread)) { + pr_err(BANNER "could not start sampling thread\n"); + return -ENOMEM; + } + hwlat_kthread = kthread; + wake_up_process(kthread); + + return 0; +} + +/** + * stop_kthread - Inform the hardware latency samping/detector kthread to stop + * + * This kicks the running hardware latency sampling/detector kernel thread and + * tells it to stop sampling now. Use this on unload and at system shutdown. + */ +static void stop_kthread(void) +{ + if (!hwlat_kthread) + return; + kthread_stop(hwlat_kthread); + hwlat_kthread = NULL; +} + +/* + * hwlat_read - Wrapper read function for reading both window and width + * @filp: The active open file structure + * @ubuf: The userspace provided buffer to read value into + * @cnt: The maximum number of bytes to read + * @ppos: The current "file" position + * + * This function provides a generic read implementation for the global state + * "hwlat_data" structure filesystem entries. + */ +static ssize_t hwlat_read(struct file *filp, char __user *ubuf, + size_t cnt, loff_t *ppos) +{ + char buf[U64STR_SIZE]; + u64 *entry = filp->private_data; + u64 val; + int len; + + if (!entry) + return -EFAULT; + + if (cnt > sizeof(buf)) + cnt = sizeof(buf); + + val = *entry; + + len = snprintf(buf, sizeof(buf), "%llu\n", val); + + return simple_read_from_buffer(ubuf, cnt, ppos, buf, len); +} + +/** + * hwlat_width_write - Write function for "width" entry + * @filp: The active open file structure + * @ubuf: The user buffer that contains the value to write + * @cnt: The maximum number of bytes to write to "file" + * @ppos: The current position in @file + * + * This function provides a write implementation for the "width" interface + * to the hardware latency detector. It can be used to configure + * for how many us of the total window us we will actively sample for any + * hardware-induced latency periods. Obviously, it is not possible to + * sample constantly and have the system respond to a sample reader, or, + * worse, without having the system appear to have gone out to lunch. It + * is enforced that width is less that the total window size. + */ +static ssize_t +hwlat_width_write(struct file *filp, const char __user *ubuf, + size_t cnt, loff_t *ppos) +{ + u64 val; + int err; + + err = kstrtoull_from_user(ubuf, cnt, 10, &val); + if (err) + return err; + + mutex_lock(&hwlat_data.lock); + if (val < hwlat_data.sample_window) + hwlat_data.sample_width = val; + else + err = -EINVAL; + mutex_unlock(&hwlat_data.lock); + + if (err) + return err; + + return cnt; +} + +/** + * hwlat_window_write - Write function for "window" entry + * @filp: The active open file structure + * @ubuf: The user buffer that contains the value to write + * @cnt: The maximum number of bytes to write to "file" + * @ppos: The current position in @file + * + * This function provides a write implementation for the "window" interface + * to the hardware latency detetector. The window is the total time + * in us that will be considered one sample period. Conceptually, windows + * occur back-to-back and contain a sample width period during which + * actual sampling occurs. Can be used to write a new total window size. It + * is enfoced that any value written must be greater than the sample width + * size, or an error results. + */ +static ssize_t +hwlat_window_write(struct file *filp, const char __user *ubuf, + size_t cnt, loff_t *ppos) +{ + u64 val; + int err; + + err = kstrtoull_from_user(ubuf, cnt, 10, &val); + if (err) + return err; + + mutex_lock(&hwlat_data.lock); + if (hwlat_data.sample_width < val) + hwlat_data.sample_window = val; + else + err = -EINVAL; + mutex_unlock(&hwlat_data.lock); + + if (err) + return err; + + return cnt; +} + +static const struct file_operations width_fops = { + .open = tracing_open_generic, + .read = hwlat_read, + .write = hwlat_width_write, +}; + +static const struct file_operations window_fops = { + .open = tracing_open_generic, + .read = hwlat_read, + .write = hwlat_window_write, +}; + +/** + * init_tracefs - A function to initialize the tracefs interface files + * + * This function creates entries in tracefs for "hwlat_detector". + * It creates the hwlat_detector directory in the tracing directory, + * and within that directory is the count, width and window files to + * change and view those values. + */ +static int init_tracefs(void) +{ + struct dentry *d_tracer; + struct dentry *top_dir; + + d_tracer = tracing_init_dentry(); + if (IS_ERR(d_tracer)) + return -ENOMEM; + + top_dir = tracefs_create_dir("hwlat_detector", d_tracer); + if (!top_dir) + return -ENOMEM; + + hwlat_sample_window = tracefs_create_file("window", 0640, + top_dir, + &hwlat_data.sample_window, + &window_fops); + if (!hwlat_sample_window) + goto err; + + hwlat_sample_width = tracefs_create_file("width", 0644, + top_dir, + &hwlat_data.sample_width, + &width_fops); + if (!hwlat_sample_width) + goto err; + + return 0; + + err: + tracefs_remove_recursive(top_dir); + return -ENOMEM; +} + +static void hwlat_tracer_start(struct trace_array *tr) +{ + int err; + + err = start_kthread(tr); + if (err) + pr_err(BANNER "Cannot start hwlat kthread\n"); +} + +static void hwlat_tracer_stop(struct trace_array *tr) +{ + stop_kthread(); +} + +static bool hwlat_busy; + +static int hwlat_tracer_init(struct trace_array *tr) +{ + /* Only allow one instance to enable this */ + if (hwlat_busy) + return -EBUSY; + + hwlat_trace = tr; + + disable_migrate = false; + hwlat_data.count = 0; + tr->max_latency = 0; + save_tracing_thresh = tracing_thresh; + + /* tracing_thresh is in nsecs, we speak in usecs */ + if (!tracing_thresh) + tracing_thresh = last_tracing_thresh; + + if (tracer_tracing_is_on(tr)) + hwlat_tracer_start(tr); + + hwlat_busy = true; + + return 0; +} + +static void hwlat_tracer_reset(struct trace_array *tr) +{ + stop_kthread(); + + /* the tracing threshold is static between runs */ + last_tracing_thresh = tracing_thresh; + + tracing_thresh = save_tracing_thresh; + hwlat_busy = false; +} + +static struct tracer hwlat_tracer __read_mostly = +{ + .name = "hwlat", + .init = hwlat_tracer_init, + .reset = hwlat_tracer_reset, + .start = hwlat_tracer_start, + .stop = hwlat_tracer_stop, + .allow_instances = true, +}; + +__init static int init_hwlat_tracer(void) +{ + int ret; + + mutex_init(&hwlat_data.lock); + + ret = register_tracer(&hwlat_tracer); + if (ret) + return ret; + + init_tracefs(); + + return 0; +} +late_initcall(init_hwlat_tracer); diff --git a/kernel/trace/trace_output.c b/kernel/trace/trace_output.c index 0bb9cf2d53e6..3fc20422c166 100644 --- a/kernel/trace/trace_output.c +++ b/kernel/trace/trace_output.c @@ -1098,6 +1098,71 @@ static struct trace_event trace_user_stack_event = { .funcs = &trace_user_stack_funcs, }; +/* TRACE_HWLAT */ +static enum print_line_t +trace_hwlat_print(struct trace_iterator *iter, int flags, + struct trace_event *event) +{ + struct trace_entry *entry = iter->ent; + struct trace_seq *s = &iter->seq; + struct hwlat_entry *field; + + trace_assign_type(field, entry); + + trace_seq_printf(s, "#%-5u inner/outer(us): %4llu/%-5llu ts:%ld.%09ld", + field->seqnum, + field->duration, + field->outer_duration, + field->timestamp.tv_sec, + field->timestamp.tv_nsec); + + if (field->nmi_count) { + /* + * The generic sched_clock() is not NMI safe, thus + * we only record the count and not the time. + */ + if (!IS_ENABLED(CONFIG_GENERIC_SCHED_CLOCK)) + trace_seq_printf(s, " nmi-total:%llu", + field->nmi_total_ts); + trace_seq_printf(s, " nmi-count:%u", + field->nmi_count); + } + + trace_seq_putc(s, '\n'); + + return trace_handle_return(s); +} + + +static enum print_line_t +trace_hwlat_raw(struct trace_iterator *iter, int flags, + struct trace_event *event) +{ + struct hwlat_entry *field; + struct trace_seq *s = &iter->seq; + + trace_assign_type(field, iter->ent); + + trace_seq_printf(s, "%llu %lld %ld %09ld %u\n", + field->duration, + field->outer_duration, + field->timestamp.tv_sec, + field->timestamp.tv_nsec, + field->seqnum); + + return trace_handle_return(s); +} + +static struct trace_event_functions trace_hwlat_funcs = { + .trace = trace_hwlat_print, + .raw = trace_hwlat_raw, +}; + +static struct trace_event trace_hwlat_event = { + .type = TRACE_HWLAT, + .funcs = &trace_hwlat_funcs, +}; + /* TRACE_BPUTS */ static enum print_line_t trace_bputs_print(struct trace_iterator *iter, int flags, @@ -1233,6 +1298,7 @@ static struct trace_event *events[] __initdata = { &trace_bputs_event, &trace_bprint_event, &trace_print_event, + &trace_hwlat_event, NULL }; diff --git a/kernel/trace/trace_uprobe.c b/kernel/trace/trace_uprobe.c index 7a687320f867..0913693caf6e 100644 --- a/kernel/trace/trace_uprobe.c +++ b/kernel/trace/trace_uprobe.c @@ -431,10 +431,6 @@ static int create_trace_uprobe(int argc, char **argv) pr_info("Probe point is not specified.\n"); return -EINVAL; } - if (isdigit(argv[1][0])) { - pr_info("probe point must be have a filename.\n"); - return -EINVAL; - } arg = strchr(argv[1], ':'); if (!arg) { ret = -EINVAL; |