diff options
Diffstat (limited to 'include/uapi/linux')
82 files changed, 2266 insertions, 620 deletions
diff --git a/include/uapi/linux/Kbuild b/include/uapi/linux/Kbuild index e194387ef784..5c8a1d25e21c 100644 --- a/include/uapi/linux/Kbuild +++ b/include/uapi/linux/Kbuild @@ -68,6 +68,7 @@ header-y += blkpg.h header-y += blktrace_api.h header-y += bpqether.h header-y += bsg.h +header-y += btrfs.h header-y += can.h header-y += capability.h header-y += capi.h @@ -258,6 +259,7 @@ header-y += neighbour.h header-y += net.h header-y += net_dropmon.h header-y += net_tstamp.h +header-y += netconf.h header-y += netdevice.h header-y += netfilter.h header-y += netfilter_arp.h @@ -415,3 +417,4 @@ header-y += wireless.h header-y += x25.h header-y += xattr.h header-y += xfrm.h +header-y += hw_breakpoint.h diff --git a/include/uapi/linux/acct.h b/include/uapi/linux/acct.h index 11b6ca3e0873..df2f9a0bba6a 100644 --- a/include/uapi/linux/acct.h +++ b/include/uapi/linux/acct.h @@ -107,10 +107,12 @@ struct acct_v3 #define ACORE 0x08 /* ... dumped core */ #define AXSIG 0x10 /* ... was killed by a signal */ -#ifdef __BIG_ENDIAN +#if defined(__BYTE_ORDER) ? __BYTE_ORDER == __BIG_ENDIAN : defined(__BIG_ENDIAN) #define ACCT_BYTEORDER 0x80 /* accounting file is big endian */ -#else +#elif defined(__BYTE_ORDER) ? __BYTE_ORDER == __LITTLE_ENDIAN : defined(__LITTLE_ENDIAN) #define ACCT_BYTEORDER 0x00 /* accounting file is little endian */ +#else +#error unspecified endianness #endif #ifndef __KERNEL__ diff --git a/include/uapi/linux/aio_abi.h b/include/uapi/linux/aio_abi.h index 86fa7a71336a..bb2554f7fbd1 100644 --- a/include/uapi/linux/aio_abi.h +++ b/include/uapi/linux/aio_abi.h @@ -62,9 +62,9 @@ struct io_event { __s64 res2; /* secondary result */ }; -#if defined(__LITTLE_ENDIAN) +#if defined(__BYTE_ORDER) ? __BYTE_ORDER == __LITTLE_ENDIAN : defined(__LITTLE_ENDIAN) #define PADDED(x,y) x, y -#elif defined(__BIG_ENDIAN) +#elif defined(__BYTE_ORDER) ? __BYTE_ORDER == __BIG_ENDIAN : defined(__BIG_ENDIAN) #define PADDED(x,y) y, x #else #error edit for your odd byteorder. diff --git a/include/uapi/linux/audit.h b/include/uapi/linux/audit.h index 76352ac45f24..9f096f1c0907 100644 --- a/include/uapi/linux/audit.h +++ b/include/uapi/linux/audit.h @@ -26,7 +26,6 @@ #include <linux/types.h> #include <linux/elf-em.h> -#include <linux/ptrace.h> /* The netlink messages for the audit system is divided into blocks: * 1000 - 1099 are for commanding the audit system @@ -106,6 +105,7 @@ #define AUDIT_MMAP 1323 /* Record showing descriptor and flags in mmap */ #define AUDIT_NETFILTER_PKT 1324 /* Packets traversing netfilter chains */ #define AUDIT_NETFILTER_CFG 1325 /* Netfilter chain modifications */ +#define AUDIT_SECCOMP 1326 /* Secure Computing event */ #define AUDIT_AVC 1400 /* SE Linux avc denial or grant */ #define AUDIT_SELINUX_ERR 1401 /* Internal SE Linux Errors */ diff --git a/include/uapi/linux/auto_fs.h b/include/uapi/linux/auto_fs.h index 77cdba9df274..bb991dfe134f 100644 --- a/include/uapi/linux/auto_fs.h +++ b/include/uapi/linux/auto_fs.h @@ -28,25 +28,16 @@ #define AUTOFS_MIN_PROTO_VERSION AUTOFS_PROTO_VERSION /* - * Architectures where both 32- and 64-bit binaries can be executed - * on 64-bit kernels need this. This keeps the structure format - * uniform, and makes sure the wait_queue_token isn't too big to be - * passed back down to the kernel. - * - * This assumes that on these architectures: - * mode 32 bit 64 bit - * ------------------------- - * int 32 bit 32 bit - * long 32 bit 64 bit - * - * If so, 32-bit user-space code should be backwards compatible. + * The wait_queue_token (autofs_wqt_t) is part of a structure which is passed + * back to the kernel via ioctl from userspace. On architectures where 32- and + * 64-bit userspace binaries can be executed it's important that the size of + * autofs_wqt_t stays constant between 32- and 64-bit Linux kernels so that we + * do not break the binary ABI interface by changing the structure size. */ - -#if defined(__sparc__) || defined(__mips__) || defined(__x86_64__) \ - || defined(__powerpc__) || defined(__s390__) -typedef unsigned int autofs_wqt_t; -#else +#if defined(__ia64__) || defined(__alpha__) /* pure 64bit architectures */ typedef unsigned long autofs_wqt_t; +#else +typedef unsigned int autofs_wqt_t; #endif /* Packet types */ diff --git a/include/uapi/linux/btrfs.h b/include/uapi/linux/btrfs.h new file mode 100644 index 000000000000..fa3a5f9338fc --- /dev/null +++ b/include/uapi/linux/btrfs.h @@ -0,0 +1,514 @@ +/* + * Copyright (C) 2007 Oracle. All rights reserved. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public + * License v2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public + * License along with this program; if not, write to the + * Free Software Foundation, Inc., 59 Temple Place - Suite 330, + * Boston, MA 021110-1307, USA. + */ + +#ifndef _UAPI_LINUX_BTRFS_H +#define _UAPI_LINUX_BTRFS_H +#include <linux/types.h> +#include <linux/ioctl.h> + +#define BTRFS_IOCTL_MAGIC 0x94 +#define BTRFS_VOL_NAME_MAX 255 + +/* this should be 4k */ +#define BTRFS_PATH_NAME_MAX 4087 +struct btrfs_ioctl_vol_args { + __s64 fd; + char name[BTRFS_PATH_NAME_MAX + 1]; +}; + +#define BTRFS_DEVICE_PATH_NAME_MAX 1024 + +#define BTRFS_SUBVOL_CREATE_ASYNC (1ULL << 0) +#define BTRFS_SUBVOL_RDONLY (1ULL << 1) +#define BTRFS_SUBVOL_QGROUP_INHERIT (1ULL << 2) +#define BTRFS_FSID_SIZE 16 +#define BTRFS_UUID_SIZE 16 + +#define BTRFS_QGROUP_INHERIT_SET_LIMITS (1ULL << 0) + +struct btrfs_qgroup_limit { + __u64 flags; + __u64 max_rfer; + __u64 max_excl; + __u64 rsv_rfer; + __u64 rsv_excl; +}; + +struct btrfs_qgroup_inherit { + __u64 flags; + __u64 num_qgroups; + __u64 num_ref_copies; + __u64 num_excl_copies; + struct btrfs_qgroup_limit lim; + __u64 qgroups[0]; +}; + +struct btrfs_ioctl_qgroup_limit_args { + __u64 qgroupid; + struct btrfs_qgroup_limit lim; +}; + +#define BTRFS_SUBVOL_NAME_MAX 4039 +struct btrfs_ioctl_vol_args_v2 { + __s64 fd; + __u64 transid; + __u64 flags; + union { + struct { + __u64 size; + struct btrfs_qgroup_inherit __user *qgroup_inherit; + }; + __u64 unused[4]; + }; + char name[BTRFS_SUBVOL_NAME_MAX + 1]; +}; + +/* + * structure to report errors and progress to userspace, either as a + * result of a finished scrub, a canceled scrub or a progress inquiry + */ +struct btrfs_scrub_progress { + __u64 data_extents_scrubbed; /* # of data extents scrubbed */ + __u64 tree_extents_scrubbed; /* # of tree extents scrubbed */ + __u64 data_bytes_scrubbed; /* # of data bytes scrubbed */ + __u64 tree_bytes_scrubbed; /* # of tree bytes scrubbed */ + __u64 read_errors; /* # of read errors encountered (EIO) */ + __u64 csum_errors; /* # of failed csum checks */ + __u64 verify_errors; /* # of occurences, where the metadata + * of a tree block did not match the + * expected values, like generation or + * logical */ + __u64 no_csum; /* # of 4k data block for which no csum + * is present, probably the result of + * data written with nodatasum */ + __u64 csum_discards; /* # of csum for which no data was found + * in the extent tree. */ + __u64 super_errors; /* # of bad super blocks encountered */ + __u64 malloc_errors; /* # of internal kmalloc errors. These + * will likely cause an incomplete + * scrub */ + __u64 uncorrectable_errors; /* # of errors where either no intact + * copy was found or the writeback + * failed */ + __u64 corrected_errors; /* # of errors corrected */ + __u64 last_physical; /* last physical address scrubbed. In + * case a scrub was aborted, this can + * be used to restart the scrub */ + __u64 unverified_errors; /* # of occurences where a read for a + * full (64k) bio failed, but the re- + * check succeeded for each 4k piece. + * Intermittent error. */ +}; + +#define BTRFS_SCRUB_READONLY 1 +struct btrfs_ioctl_scrub_args { + __u64 devid; /* in */ + __u64 start; /* in */ + __u64 end; /* in */ + __u64 flags; /* in */ + struct btrfs_scrub_progress progress; /* out */ + /* pad to 1k */ + __u64 unused[(1024-32-sizeof(struct btrfs_scrub_progress))/8]; +}; + +#define BTRFS_IOCTL_DEV_REPLACE_CONT_READING_FROM_SRCDEV_MODE_ALWAYS 0 +#define BTRFS_IOCTL_DEV_REPLACE_CONT_READING_FROM_SRCDEV_MODE_AVOID 1 +struct btrfs_ioctl_dev_replace_start_params { + __u64 srcdevid; /* in, if 0, use srcdev_name instead */ + __u64 cont_reading_from_srcdev_mode; /* in, see #define + * above */ + __u8 srcdev_name[BTRFS_DEVICE_PATH_NAME_MAX + 1]; /* in */ + __u8 tgtdev_name[BTRFS_DEVICE_PATH_NAME_MAX + 1]; /* in */ +}; + +#define BTRFS_IOCTL_DEV_REPLACE_STATE_NEVER_STARTED 0 +#define BTRFS_IOCTL_DEV_REPLACE_STATE_STARTED 1 +#define BTRFS_IOCTL_DEV_REPLACE_STATE_FINISHED 2 +#define BTRFS_IOCTL_DEV_REPLACE_STATE_CANCELED 3 +#define BTRFS_IOCTL_DEV_REPLACE_STATE_SUSPENDED 4 +struct btrfs_ioctl_dev_replace_status_params { + __u64 replace_state; /* out, see #define above */ + __u64 progress_1000; /* out, 0 <= x <= 1000 */ + __u64 time_started; /* out, seconds since 1-Jan-1970 */ + __u64 time_stopped; /* out, seconds since 1-Jan-1970 */ + __u64 num_write_errors; /* out */ + __u64 num_uncorrectable_read_errors; /* out */ +}; + +#define BTRFS_IOCTL_DEV_REPLACE_CMD_START 0 +#define BTRFS_IOCTL_DEV_REPLACE_CMD_STATUS 1 +#define BTRFS_IOCTL_DEV_REPLACE_CMD_CANCEL 2 +#define BTRFS_IOCTL_DEV_REPLACE_RESULT_NO_ERROR 0 +#define BTRFS_IOCTL_DEV_REPLACE_RESULT_NOT_STARTED 1 +#define BTRFS_IOCTL_DEV_REPLACE_RESULT_ALREADY_STARTED 2 +struct btrfs_ioctl_dev_replace_args { + __u64 cmd; /* in */ + __u64 result; /* out */ + + union { + struct btrfs_ioctl_dev_replace_start_params start; + struct btrfs_ioctl_dev_replace_status_params status; + }; /* in/out */ + + __u64 spare[64]; +}; + +struct btrfs_ioctl_dev_info_args { + __u64 devid; /* in/out */ + __u8 uuid[BTRFS_UUID_SIZE]; /* in/out */ + __u64 bytes_used; /* out */ + __u64 total_bytes; /* out */ + __u64 unused[379]; /* pad to 4k */ + __u8 path[BTRFS_DEVICE_PATH_NAME_MAX]; /* out */ +}; + +struct btrfs_ioctl_fs_info_args { + __u64 max_id; /* out */ + __u64 num_devices; /* out */ + __u8 fsid[BTRFS_FSID_SIZE]; /* out */ + __u64 reserved[124]; /* pad to 1k */ +}; + +/* balance control ioctl modes */ +#define BTRFS_BALANCE_CTL_PAUSE 1 +#define BTRFS_BALANCE_CTL_CANCEL 2 + +/* + * this is packed, because it should be exactly the same as its disk + * byte order counterpart (struct btrfs_disk_balance_args) + */ +struct btrfs_balance_args { + __u64 profiles; + __u64 usage; + __u64 devid; + __u64 pstart; + __u64 pend; + __u64 vstart; + __u64 vend; + + __u64 target; + + __u64 flags; + + __u64 unused[8]; +} __attribute__ ((__packed__)); + +/* report balance progress to userspace */ +struct btrfs_balance_progress { + __u64 expected; /* estimated # of chunks that will be + * relocated to fulfill the request */ + __u64 considered; /* # of chunks we have considered so far */ + __u64 completed; /* # of chunks relocated so far */ +}; + +#define BTRFS_BALANCE_STATE_RUNNING (1ULL << 0) +#define BTRFS_BALANCE_STATE_PAUSE_REQ (1ULL << 1) +#define BTRFS_BALANCE_STATE_CANCEL_REQ (1ULL << 2) + +struct btrfs_ioctl_balance_args { + __u64 flags; /* in/out */ + __u64 state; /* out */ + + struct btrfs_balance_args data; /* in/out */ + struct btrfs_balance_args meta; /* in/out */ + struct btrfs_balance_args sys; /* in/out */ + + struct btrfs_balance_progress stat; /* out */ + + __u64 unused[72]; /* pad to 1k */ +}; + +#define BTRFS_INO_LOOKUP_PATH_MAX 4080 +struct btrfs_ioctl_ino_lookup_args { + __u64 treeid; + __u64 objectid; + char name[BTRFS_INO_LOOKUP_PATH_MAX]; +}; + +struct btrfs_ioctl_search_key { + /* which root are we searching. 0 is the tree of tree roots */ + __u64 tree_id; + + /* keys returned will be >= min and <= max */ + __u64 min_objectid; + __u64 max_objectid; + + /* keys returned will be >= min and <= max */ + __u64 min_offset; + __u64 max_offset; + + /* max and min transids to search for */ + __u64 min_transid; + __u64 max_transid; + + /* keys returned will be >= min and <= max */ + __u32 min_type; + __u32 max_type; + + /* + * how many items did userland ask for, and how many are we + * returning + */ + __u32 nr_items; + + /* align to 64 bits */ + __u32 unused; + + /* some extra for later */ + __u64 unused1; + __u64 unused2; + __u64 unused3; + __u64 unused4; +}; + +struct btrfs_ioctl_search_header { + __u64 transid; + __u64 objectid; + __u64 offset; + __u32 type; + __u32 len; +}; + +#define BTRFS_SEARCH_ARGS_BUFSIZE (4096 - sizeof(struct btrfs_ioctl_search_key)) +/* + * the buf is an array of search headers where + * each header is followed by the actual item + * the type field is expanded to 32 bits for alignment + */ +struct btrfs_ioctl_search_args { + struct btrfs_ioctl_search_key key; + char buf[BTRFS_SEARCH_ARGS_BUFSIZE]; +}; + +struct btrfs_ioctl_clone_range_args { + __s64 src_fd; + __u64 src_offset, src_length; + __u64 dest_offset; +}; + +/* flags for the defrag range ioctl */ +#define BTRFS_DEFRAG_RANGE_COMPRESS 1 +#define BTRFS_DEFRAG_RANGE_START_IO 2 + +struct btrfs_ioctl_space_info { + __u64 flags; + __u64 total_bytes; + __u64 used_bytes; +}; + +struct btrfs_ioctl_space_args { + __u64 space_slots; + __u64 total_spaces; + struct btrfs_ioctl_space_info spaces[0]; +}; + +struct btrfs_data_container { + __u32 bytes_left; /* out -- bytes not needed to deliver output */ + __u32 bytes_missing; /* out -- additional bytes needed for result */ + __u32 elem_cnt; /* out */ + __u32 elem_missed; /* out */ + __u64 val[0]; /* out */ +}; + +struct btrfs_ioctl_ino_path_args { + __u64 inum; /* in */ + __u64 size; /* in */ + __u64 reserved[4]; + /* struct btrfs_data_container *fspath; out */ + __u64 fspath; /* out */ +}; + +struct btrfs_ioctl_logical_ino_args { + __u64 logical; /* in */ + __u64 size; /* in */ + __u64 reserved[4]; + /* struct btrfs_data_container *inodes; out */ + __u64 inodes; +}; + +enum btrfs_dev_stat_values { + /* disk I/O failure stats */ + BTRFS_DEV_STAT_WRITE_ERRS, /* EIO or EREMOTEIO from lower layers */ + BTRFS_DEV_STAT_READ_ERRS, /* EIO or EREMOTEIO from lower layers */ + BTRFS_DEV_STAT_FLUSH_ERRS, /* EIO or EREMOTEIO from lower layers */ + + /* stats for indirect indications for I/O failures */ + BTRFS_DEV_STAT_CORRUPTION_ERRS, /* checksum error, bytenr error or + * contents is illegal: this is an + * indication that the block was damaged + * during read or write, or written to + * wrong location or read from wrong + * location */ + BTRFS_DEV_STAT_GENERATION_ERRS, /* an indication that blocks have not + * been written */ + + BTRFS_DEV_STAT_VALUES_MAX +}; + +/* Reset statistics after reading; needs SYS_ADMIN capability */ +#define BTRFS_DEV_STATS_RESET (1ULL << 0) + +struct btrfs_ioctl_get_dev_stats { + __u64 devid; /* in */ + __u64 nr_items; /* in/out */ + __u64 flags; /* in/out */ + + /* out values: */ + __u64 values[BTRFS_DEV_STAT_VALUES_MAX]; + + __u64 unused[128 - 2 - BTRFS_DEV_STAT_VALUES_MAX]; /* pad to 1k */ +}; + +#define BTRFS_QUOTA_CTL_ENABLE 1 +#define BTRFS_QUOTA_CTL_DISABLE 2 +#define BTRFS_QUOTA_CTL_RESCAN 3 +struct btrfs_ioctl_quota_ctl_args { + __u64 cmd; + __u64 status; +}; + +struct btrfs_ioctl_qgroup_assign_args { + __u64 assign; + __u64 src; + __u64 dst; +}; + +struct btrfs_ioctl_qgroup_create_args { + __u64 create; + __u64 qgroupid; +}; +struct btrfs_ioctl_timespec { + __u64 sec; + __u32 nsec; +}; + +struct btrfs_ioctl_received_subvol_args { + char uuid[BTRFS_UUID_SIZE]; /* in */ + __u64 stransid; /* in */ + __u64 rtransid; /* out */ + struct btrfs_ioctl_timespec stime; /* in */ + struct btrfs_ioctl_timespec rtime; /* out */ + __u64 flags; /* in */ + __u64 reserved[16]; /* in */ +}; + +/* + * Caller doesn't want file data in the send stream, even if the + * search of clone sources doesn't find an extent. UPDATE_EXTENT + * commands will be sent instead of WRITE commands. + */ +#define BTRFS_SEND_FLAG_NO_FILE_DATA 0x1 + +struct btrfs_ioctl_send_args { + __s64 send_fd; /* in */ + __u64 clone_sources_count; /* in */ + __u64 __user *clone_sources; /* in */ + __u64 parent_root; /* in */ + __u64 flags; /* in */ + __u64 reserved[4]; /* in */ +}; + +#define BTRFS_IOC_SNAP_CREATE _IOW(BTRFS_IOCTL_MAGIC, 1, \ + struct btrfs_ioctl_vol_args) +#define BTRFS_IOC_DEFRAG _IOW(BTRFS_IOCTL_MAGIC, 2, \ + struct btrfs_ioctl_vol_args) +#define BTRFS_IOC_RESIZE _IOW(BTRFS_IOCTL_MAGIC, 3, \ + struct btrfs_ioctl_vol_args) +#define BTRFS_IOC_SCAN_DEV _IOW(BTRFS_IOCTL_MAGIC, 4, \ + struct btrfs_ioctl_vol_args) +/* trans start and trans end are dangerous, and only for + * use by applications that know how to avoid the + * resulting deadlocks + */ +#define BTRFS_IOC_TRANS_START _IO(BTRFS_IOCTL_MAGIC, 6) +#define BTRFS_IOC_TRANS_END _IO(BTRFS_IOCTL_MAGIC, 7) +#define BTRFS_IOC_SYNC _IO(BTRFS_IOCTL_MAGIC, 8) + +#define BTRFS_IOC_CLONE _IOW(BTRFS_IOCTL_MAGIC, 9, int) +#define BTRFS_IOC_ADD_DEV _IOW(BTRFS_IOCTL_MAGIC, 10, \ + struct btrfs_ioctl_vol_args) +#define BTRFS_IOC_RM_DEV _IOW(BTRFS_IOCTL_MAGIC, 11, \ + struct btrfs_ioctl_vol_args) +#define BTRFS_IOC_BALANCE _IOW(BTRFS_IOCTL_MAGIC, 12, \ + struct btrfs_ioctl_vol_args) + +#define BTRFS_IOC_CLONE_RANGE _IOW(BTRFS_IOCTL_MAGIC, 13, \ + struct btrfs_ioctl_clone_range_args) + +#define BTRFS_IOC_SUBVOL_CREATE _IOW(BTRFS_IOCTL_MAGIC, 14, \ + struct btrfs_ioctl_vol_args) +#define BTRFS_IOC_SNAP_DESTROY _IOW(BTRFS_IOCTL_MAGIC, 15, \ + struct btrfs_ioctl_vol_args) +#define BTRFS_IOC_DEFRAG_RANGE _IOW(BTRFS_IOCTL_MAGIC, 16, \ + struct btrfs_ioctl_defrag_range_args) +#define BTRFS_IOC_TREE_SEARCH _IOWR(BTRFS_IOCTL_MAGIC, 17, \ + struct btrfs_ioctl_search_args) +#define BTRFS_IOC_INO_LOOKUP _IOWR(BTRFS_IOCTL_MAGIC, 18, \ + struct btrfs_ioctl_ino_lookup_args) +#define BTRFS_IOC_DEFAULT_SUBVOL _IOW(BTRFS_IOCTL_MAGIC, 19, u64) +#define BTRFS_IOC_SPACE_INFO _IOWR(BTRFS_IOCTL_MAGIC, 20, \ + struct btrfs_ioctl_space_args) +#define BTRFS_IOC_START_SYNC _IOR(BTRFS_IOCTL_MAGIC, 24, __u64) +#define BTRFS_IOC_WAIT_SYNC _IOW(BTRFS_IOCTL_MAGIC, 22, __u64) +#define BTRFS_IOC_SNAP_CREATE_V2 _IOW(BTRFS_IOCTL_MAGIC, 23, \ + struct btrfs_ioctl_vol_args_v2) +#define BTRFS_IOC_SUBVOL_CREATE_V2 _IOW(BTRFS_IOCTL_MAGIC, 24, \ + struct btrfs_ioctl_vol_args_v2) +#define BTRFS_IOC_SUBVOL_GETFLAGS _IOR(BTRFS_IOCTL_MAGIC, 25, __u64) +#define BTRFS_IOC_SUBVOL_SETFLAGS _IOW(BTRFS_IOCTL_MAGIC, 26, __u64) +#define BTRFS_IOC_SCRUB _IOWR(BTRFS_IOCTL_MAGIC, 27, \ + struct btrfs_ioctl_scrub_args) +#define BTRFS_IOC_SCRUB_CANCEL _IO(BTRFS_IOCTL_MAGIC, 28) +#define BTRFS_IOC_SCRUB_PROGRESS _IOWR(BTRFS_IOCTL_MAGIC, 29, \ + struct btrfs_ioctl_scrub_args) +#define BTRFS_IOC_DEV_INFO _IOWR(BTRFS_IOCTL_MAGIC, 30, \ + struct btrfs_ioctl_dev_info_args) +#define BTRFS_IOC_FS_INFO _IOR(BTRFS_IOCTL_MAGIC, 31, \ + struct btrfs_ioctl_fs_info_args) +#define BTRFS_IOC_BALANCE_V2 _IOWR(BTRFS_IOCTL_MAGIC, 32, \ + struct btrfs_ioctl_balance_args) +#define BTRFS_IOC_BALANCE_CTL _IOW(BTRFS_IOCTL_MAGIC, 33, int) +#define BTRFS_IOC_BALANCE_PROGRESS _IOR(BTRFS_IOCTL_MAGIC, 34, \ + struct btrfs_ioctl_balance_args) +#define BTRFS_IOC_INO_PATHS _IOWR(BTRFS_IOCTL_MAGIC, 35, \ + struct btrfs_ioctl_ino_path_args) +#define BTRFS_IOC_LOGICAL_INO _IOWR(BTRFS_IOCTL_MAGIC, 36, \ + struct btrfs_ioctl_ino_path_args) +#define BTRFS_IOC_SET_RECEIVED_SUBVOL _IOWR(BTRFS_IOCTL_MAGIC, 37, \ + struct btrfs_ioctl_received_subvol_args) +#define BTRFS_IOC_SEND _IOW(BTRFS_IOCTL_MAGIC, 38, struct btrfs_ioctl_send_args) +#define BTRFS_IOC_DEVICES_READY _IOR(BTRFS_IOCTL_MAGIC, 39, \ + struct btrfs_ioctl_vol_args) +#define BTRFS_IOC_QUOTA_CTL _IOWR(BTRFS_IOCTL_MAGIC, 40, \ + struct btrfs_ioctl_quota_ctl_args) +#define BTRFS_IOC_QGROUP_ASSIGN _IOW(BTRFS_IOCTL_MAGIC, 41, \ + struct btrfs_ioctl_qgroup_assign_args) +#define BTRFS_IOC_QGROUP_CREATE _IOW(BTRFS_IOCTL_MAGIC, 42, \ + struct btrfs_ioctl_qgroup_create_args) +#define BTRFS_IOC_QGROUP_LIMIT _IOR(BTRFS_IOCTL_MAGIC, 43, \ + struct btrfs_ioctl_qgroup_limit_args) +#define BTRFS_IOC_GET_FSLABEL _IOR(BTRFS_IOCTL_MAGIC, 49, \ + char[BTRFS_LABEL_SIZE]) +#define BTRFS_IOC_SET_FSLABEL _IOW(BTRFS_IOCTL_MAGIC, 50, \ + char[BTRFS_LABEL_SIZE]) +#define BTRFS_IOC_GET_DEV_STATS _IOWR(BTRFS_IOCTL_MAGIC, 52, \ + struct btrfs_ioctl_get_dev_stats) +#define BTRFS_IOC_DEV_REPLACE _IOWR(BTRFS_IOCTL_MAGIC, 53, \ + struct btrfs_ioctl_dev_replace_args) + +#endif /* _UAPI_LINUX_BTRFS_H */ diff --git a/include/uapi/linux/can/gw.h b/include/uapi/linux/can/gw.h index 8e1db18c3cb6..ae07bec74f4b 100644 --- a/include/uapi/linux/can/gw.h +++ b/include/uapi/linux/can/gw.h @@ -44,6 +44,7 @@ enum { CGW_SRC_IF, /* ifindex of source network interface */ CGW_DST_IF, /* ifindex of destination network interface */ CGW_FILTER, /* specify struct can_filter on source CAN device */ + CGW_DELETED, /* number of deleted CAN frames (see max_hops param) */ __CGW_MAX }; @@ -51,6 +52,7 @@ enum { #define CGW_FLAGS_CAN_ECHO 0x01 #define CGW_FLAGS_CAN_SRC_TSTAMP 0x02 +#define CGW_FLAGS_CAN_IIF_TX_OK 0x04 #define CGW_MOD_FUNCS 4 /* AND OR XOR SET */ diff --git a/include/uapi/linux/cdrom.h b/include/uapi/linux/cdrom.h index 898b866b300c..bd17ad5aa06d 100644 --- a/include/uapi/linux/cdrom.h +++ b/include/uapi/linux/cdrom.h @@ -908,5 +908,39 @@ struct mode_page_header { __be16 desc_length; }; +/* removable medium feature descriptor */ +struct rm_feature_desc { + __be16 feature_code; +#if defined(__BIG_ENDIAN_BITFIELD) + __u8 reserved1:2; + __u8 feature_version:4; + __u8 persistent:1; + __u8 curr:1; +#elif defined(__LITTLE_ENDIAN_BITFIELD) + __u8 curr:1; + __u8 persistent:1; + __u8 feature_version:4; + __u8 reserved1:2; +#endif + __u8 add_len; +#if defined(__BIG_ENDIAN_BITFIELD) + __u8 mech_type:3; + __u8 load:1; + __u8 eject:1; + __u8 pvnt_jmpr:1; + __u8 dbml:1; + __u8 lock:1; +#elif defined(__LITTLE_ENDIAN_BITFIELD) + __u8 lock:1; + __u8 dbml:1; + __u8 pvnt_jmpr:1; + __u8 eject:1; + __u8 load:1; + __u8 mech_type:3; +#endif + __u8 reserved2; + __u8 reserved3; + __u8 reserved4; +}; #endif /* _UAPI_LINUX_CDROM_H */ diff --git a/include/uapi/linux/dm-ioctl.h b/include/uapi/linux/dm-ioctl.h index 91e3a360f611..7e75b6fd8d45 100644 --- a/include/uapi/linux/dm-ioctl.h +++ b/include/uapi/linux/dm-ioctl.h @@ -267,9 +267,9 @@ enum { #define DM_DEV_SET_GEOMETRY _IOWR(DM_IOCTL, DM_DEV_SET_GEOMETRY_CMD, struct dm_ioctl) #define DM_VERSION_MAJOR 4 -#define DM_VERSION_MINOR 23 +#define DM_VERSION_MINOR 24 #define DM_VERSION_PATCHLEVEL 0 -#define DM_VERSION_EXTRA "-ioctl (2012-07-25)" +#define DM_VERSION_EXTRA "-ioctl (2013-01-15)" /* Status bits */ #define DM_READONLY_FLAG (1 << 0) /* In/Out */ @@ -336,4 +336,9 @@ enum { */ #define DM_SECURE_DATA_FLAG (1 << 15) /* In */ +/* + * If set, a message generated output data. + */ +#define DM_DATA_OUT_FLAG (1 << 16) /* Out */ + #endif /* _LINUX_DM_IOCTL_H */ diff --git a/include/uapi/linux/dvb/frontend.h b/include/uapi/linux/dvb/frontend.h index c12d452cb40d..c56d77c496a5 100644 --- a/include/uapi/linux/dvb/frontend.h +++ b/include/uapi/linux/dvb/frontend.h @@ -365,7 +365,17 @@ struct dvb_frontend_event { #define DTV_INTERLEAVING 60 #define DTV_LNA 61 -#define DTV_MAX_COMMAND DTV_LNA +/* Quality parameters */ +#define DTV_STAT_SIGNAL_STRENGTH 62 +#define DTV_STAT_CNR 63 +#define DTV_STAT_PRE_ERROR_BIT_COUNT 64 +#define DTV_STAT_PRE_TOTAL_BIT_COUNT 65 +#define DTV_STAT_POST_ERROR_BIT_COUNT 66 +#define DTV_STAT_POST_TOTAL_BIT_COUNT 67 +#define DTV_STAT_ERROR_BLOCK_COUNT 68 +#define DTV_STAT_TOTAL_BLOCK_COUNT 69 + +#define DTV_MAX_COMMAND DTV_STAT_TOTAL_BLOCK_COUNT typedef enum fe_pilot { PILOT_ON, @@ -452,11 +462,78 @@ struct dtv_cmds_h { __u32 reserved:30; /* Align */ }; +/** + * Scale types for the quality parameters. + * @FE_SCALE_NOT_AVAILABLE: That QoS measure is not available. That + * could indicate a temporary or a permanent + * condition. + * @FE_SCALE_DECIBEL: The scale is measured in 0.0001 dB steps, typically + * used on signal measures. + * @FE_SCALE_RELATIVE: The scale is a relative percentual measure, + * ranging from 0 (0%) to 0xffff (100%). + * @FE_SCALE_COUNTER: The scale counts the occurrence of an event, like + * bit error, block error, lapsed time. + */ +enum fecap_scale_params { + FE_SCALE_NOT_AVAILABLE = 0, + FE_SCALE_DECIBEL, + FE_SCALE_RELATIVE, + FE_SCALE_COUNTER +}; + +/** + * struct dtv_stats - Used for reading a DTV status property + * + * @value: value of the measure. Should range from 0 to 0xffff; + * @scale: Filled with enum fecap_scale_params - the scale + * in usage for that parameter + * + * For most delivery systems, this will return a single value for each + * parameter. + * It should be noticed, however, that new OFDM delivery systems like + * ISDB can use different modulation types for each group of carriers. + * On such standards, up to 8 groups of statistics can be provided, one + * for each carrier group (called "layer" on ISDB). + * In order to be consistent with other delivery systems, the first + * value refers to the entire set of carriers ("global"). + * dtv_status:scale should use the value FE_SCALE_NOT_AVAILABLE when + * the value for the entire group of carriers or from one specific layer + * is not provided by the hardware. + * st.len should be filled with the latest filled status + 1. + * + * In other words, for ISDB, those values should be filled like: + * u.st.stat.svalue[0] = global statistics; + * u.st.stat.scale[0] = FE_SCALE_DECIBELS; + * u.st.stat.value[1] = layer A statistics; + * u.st.stat.scale[1] = FE_SCALE_NOT_AVAILABLE (if not available); + * u.st.stat.svalue[2] = layer B statistics; + * u.st.stat.scale[2] = FE_SCALE_DECIBELS; + * u.st.stat.svalue[3] = layer C statistics; + * u.st.stat.scale[3] = FE_SCALE_DECIBELS; + * u.st.len = 4; + */ +struct dtv_stats { + __u8 scale; /* enum fecap_scale_params type */ + union { + __u64 uvalue; /* for counters and relative scales */ + __s64 svalue; /* for 0.0001 dB measures */ + }; +} __attribute__ ((packed)); + + +#define MAX_DTV_STATS 4 + +struct dtv_fe_stats { + __u8 len; + struct dtv_stats stat[MAX_DTV_STATS]; +} __attribute__ ((packed)); + struct dtv_property { __u32 cmd; __u32 reserved[3]; union { __u32 data; + struct dtv_fe_stats st; struct { __u8 data[32]; __u32 len; diff --git a/include/uapi/linux/dvb/version.h b/include/uapi/linux/dvb/version.h index 827cce7e33e3..e53e2ad4444f 100644 --- a/include/uapi/linux/dvb/version.h +++ b/include/uapi/linux/dvb/version.h @@ -24,6 +24,6 @@ #define _DVBVERSION_H_ #define DVB_API_VERSION 5 -#define DVB_API_VERSION_MINOR 9 +#define DVB_API_VERSION_MINOR 10 #endif /*_DVBVERSION_H_*/ diff --git a/include/uapi/linux/elf.h b/include/uapi/linux/elf.h index 126a8175e3e2..8072d352b98f 100644 --- a/include/uapi/linux/elf.h +++ b/include/uapi/linux/elf.h @@ -49,14 +49,14 @@ typedef __s64 Elf64_Sxword; * * Specifications are available in: * - * - Sun microsystems: Linker and Libraries. - * Part No: 817-1984-17, September 2008. - * URL: http://docs.sun.com/app/docs/doc/817-1984 + * - Oracle: Linker and Libraries. + * Part No: 817–1984–19, August 2011. + * http://docs.oracle.com/cd/E18752_01/pdf/817-1984.pdf * * - System V ABI AMD64 Architecture Processor Supplement - * Draft Version 0.99., - * May 11, 2009. - * URL: http://www.x86-64.org/ + * Draft Version 0.99.4, + * January 13, 2010. + * http://www.cs.washington.edu/education/courses/cse351/12wi/supp-docs/abi.pdf */ #define PN_XNUM 0xffff @@ -395,6 +395,8 @@ typedef struct elf64_shdr { #define NT_ARM_TLS 0x401 /* ARM TLS register */ #define NT_ARM_HW_BREAK 0x402 /* ARM hardware breakpoint registers */ #define NT_ARM_HW_WATCH 0x403 /* ARM hardware watchpoint registers */ +#define NT_METAG_CBUF 0x500 /* Metag catch buffer registers */ +#define NT_METAG_RPIPE 0x501 /* Metag read pipeline state */ /* Note header in a PT_NOTE section */ diff --git a/include/uapi/linux/ethtool.h b/include/uapi/linux/ethtool.h index d3eaaaf1009e..0c9b44871df0 100644 --- a/include/uapi/linux/ethtool.h +++ b/include/uapi/linux/ethtool.h @@ -500,13 +500,26 @@ union ethtool_flow_union { struct ethtool_ah_espip4_spec esp_ip4_spec; struct ethtool_usrip4_spec usr_ip4_spec; struct ethhdr ether_spec; - __u8 hdata[60]; + __u8 hdata[52]; }; +/** + * struct ethtool_flow_ext - additional RX flow fields + * @h_dest: destination MAC address + * @vlan_etype: VLAN EtherType + * @vlan_tci: VLAN tag control information + * @data: user defined data + * + * Note, @vlan_etype, @vlan_tci, and @data are only valid if %FLOW_EXT + * is set in &struct ethtool_rx_flow_spec @flow_type. + * @h_dest is valid if %FLOW_MAC_EXT is set. + */ struct ethtool_flow_ext { - __be16 vlan_etype; - __be16 vlan_tci; - __be32 data[2]; + __u8 padding[2]; + unsigned char h_dest[ETH_ALEN]; + __be16 vlan_etype; + __be16 vlan_tci; + __be32 data[2]; }; /** @@ -517,7 +530,8 @@ struct ethtool_flow_ext { * @m_u: Masks for flow field bits to be matched * @m_ext: Masks for additional field bits to be matched * Note, all additional fields must be ignored unless @flow_type - * includes the %FLOW_EXT flag. + * includes the %FLOW_EXT or %FLOW_MAC_EXT flag + * (see &struct ethtool_flow_ext description). * @ring_cookie: RX ring/queue index to deliver to, or %RX_CLS_FLOW_DISC * if packets should be discarded * @location: Location of rule in the table. Locations must be @@ -1027,6 +1041,7 @@ enum ethtool_sfeatures_retval_bits { #define ETHER_FLOW 0x12 /* spec only (ether_spec) */ /* Flag to enable additional fields in struct ethtool_rx_flow_spec */ #define FLOW_EXT 0x80000000 +#define FLOW_MAC_EXT 0x40000000 /* L3-L4 network traffic flow hash options */ #define RXH_L2DA (1 << 1) diff --git a/include/uapi/linux/eventpoll.h b/include/uapi/linux/eventpoll.h index 8c99ce7202c5..2c267bcbb85c 100644 --- a/include/uapi/linux/eventpoll.h +++ b/include/uapi/linux/eventpoll.h @@ -25,7 +25,6 @@ #define EPOLL_CTL_ADD 1 #define EPOLL_CTL_DEL 2 #define EPOLL_CTL_MOD 3 -#define EPOLL_CTL_DISABLE 4 /* * Request the handling of system wakeup events so as to prevent system suspends diff --git a/include/uapi/linux/filter.h b/include/uapi/linux/filter.h index 3d7922433aba..9cfde6941099 100644 --- a/include/uapi/linux/filter.h +++ b/include/uapi/linux/filter.h @@ -127,7 +127,9 @@ struct sock_fprog { /* Required for SO_ATTACH_FILTER. */ #define SKF_AD_RXHASH 32 #define SKF_AD_CPU 36 #define SKF_AD_ALU_XOR_X 40 -#define SKF_AD_MAX 44 +#define SKF_AD_VLAN_TAG 44 +#define SKF_AD_VLAN_TAG_PRESENT 48 +#define SKF_AD_MAX 52 #define SKF_NET_OFF (-0x100000) #define SKF_LL_OFF (-0x200000) diff --git a/include/uapi/linux/fs.h b/include/uapi/linux/fs.h index 780d4c6093eb..c7fc1e6517c3 100644 --- a/include/uapi/linux/fs.h +++ b/include/uapi/linux/fs.h @@ -86,6 +86,9 @@ struct inodes_stat_t { #define MS_KERNMOUNT (1<<22) /* this is a kern_mount call */ #define MS_I_VERSION (1<<23) /* Update inode I_version field */ #define MS_STRICTATIME (1<<24) /* Always perform atime updates */ + +/* These sb flags are internal to the kernel */ +#define MS_SNAP_STABLE (1<<27) /* Snapshot pages during writeback, if needed */ #define MS_NOSEC (1<<28) #define MS_BORN (1<<29) #define MS_ACTIVE (1<<30) diff --git a/include/uapi/linux/fuse.h b/include/uapi/linux/fuse.h index d8c713e148e3..4c43b4448792 100644 --- a/include/uapi/linux/fuse.h +++ b/include/uapi/linux/fuse.h @@ -1,9 +1,35 @@ /* - FUSE: Filesystem in Userspace + This file defines the kernel interface of FUSE Copyright (C) 2001-2008 Miklos Szeredi <miklos@szeredi.hu> This program can be distributed under the terms of the GNU GPL. See the file COPYING. + + This -- and only this -- header file may also be distributed under + the terms of the BSD Licence as follows: + + Copyright (C) 2001-2007 Miklos Szeredi. All rights reserved. + + Redistribution and use in source and binary forms, with or without + modification, are permitted provided that the following conditions + are met: + 1. Redistributions of source code must retain the above copyright + notice, this list of conditions and the following disclaimer. + 2. Redistributions in binary form must reproduce the above copyright + notice, this list of conditions and the following disclaimer in the + documentation and/or other materials provided with the distribution. + + THIS SOFTWARE IS PROVIDED BY AUTHOR AND CONTRIBUTORS ``AS IS'' AND + ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE + ARE DISCLAIMED. IN NO EVENT SHALL AUTHOR OR CONTRIBUTORS BE LIABLE + FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS + OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) + HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT + LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY + OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF + SUCH DAMAGE. */ /* @@ -60,12 +86,25 @@ * * 7.20 * - add FUSE_AUTO_INVAL_DATA + * + * 7.21 + * - add FUSE_READDIRPLUS + * - send the requested events in POLL request */ #ifndef _LINUX_FUSE_H #define _LINUX_FUSE_H +#ifdef __linux__ #include <linux/types.h> +#else +#include <stdint.h> +#define __u64 uint64_t +#define __s64 int64_t +#define __u32 uint32_t +#define __s32 int32_t +#define __u16 uint16_t +#endif /* * Version negotiation: @@ -91,7 +130,7 @@ #define FUSE_KERNEL_VERSION 7 /** Minor version number of this interface */ -#define FUSE_KERNEL_MINOR_VERSION 20 +#define FUSE_KERNEL_MINOR_VERSION 21 /** The node ID of the root inode */ #define FUSE_ROOT_ID 1 @@ -179,6 +218,8 @@ struct fuse_file_lock { * FUSE_FLOCK_LOCKS: remote locking for BSD style file locks * FUSE_HAS_IOCTL_DIR: kernel supports ioctl on directories * FUSE_AUTO_INVAL_DATA: automatically invalidate cached pages + * FUSE_DO_READDIRPLUS: do READDIRPLUS (READDIR+LOOKUP in one) + * FUSE_READDIRPLUS_AUTO: adaptive readdirplus */ #define FUSE_ASYNC_READ (1 << 0) #define FUSE_POSIX_LOCKS (1 << 1) @@ -193,6 +234,8 @@ struct fuse_file_lock { #define FUSE_FLOCK_LOCKS (1 << 10) #define FUSE_HAS_IOCTL_DIR (1 << 11) #define FUSE_AUTO_INVAL_DATA (1 << 12) +#define FUSE_DO_READDIRPLUS (1 << 13) +#define FUSE_READDIRPLUS_AUTO (1 << 14) /** * CUSE INIT request/reply flags @@ -299,6 +342,7 @@ enum fuse_opcode { FUSE_NOTIFY_REPLY = 41, FUSE_BATCH_FORGET = 42, FUSE_FALLOCATE = 43, + FUSE_READDIRPLUS = 44, /* CUSE specific operations */ CUSE_INIT = 4096, @@ -580,7 +624,7 @@ struct fuse_poll_in { __u64 fh; __u64 kh; __u32 flags; - __u32 padding; + __u32 events; }; struct fuse_poll_out { @@ -630,6 +674,16 @@ struct fuse_dirent { #define FUSE_DIRENT_SIZE(d) \ FUSE_DIRENT_ALIGN(FUSE_NAME_OFFSET + (d)->namelen) +struct fuse_direntplus { + struct fuse_entry_out entry_out; + struct fuse_dirent dirent; +}; + +#define FUSE_NAME_OFFSET_DIRENTPLUS \ + offsetof(struct fuse_direntplus, dirent.name) +#define FUSE_DIRENTPLUS_SIZE(d) \ + FUSE_DIRENT_ALIGN(FUSE_NAME_OFFSET_DIRENTPLUS + (d)->dirent.namelen) + struct fuse_notify_inval_inode_out { __u64 ino; __s64 off; diff --git a/include/uapi/linux/hdlc/Kbuild b/include/uapi/linux/hdlc/Kbuild index aafaa5aa54d4..8c1d2cb75e33 100644 --- a/include/uapi/linux/hdlc/Kbuild +++ b/include/uapi/linux/hdlc/Kbuild @@ -1 +1,2 @@ # UAPI Header export list +header-y += ioctl.h diff --git a/include/uapi/linux/hdlc/ioctl.h b/include/uapi/linux/hdlc/ioctl.h new file mode 100644 index 000000000000..04bc0274a189 --- /dev/null +++ b/include/uapi/linux/hdlc/ioctl.h @@ -0,0 +1,84 @@ +#ifndef __HDLC_IOCTL_H__ +#define __HDLC_IOCTL_H__ + + +#define GENERIC_HDLC_VERSION 4 /* For synchronization with sethdlc utility */ + +#define CLOCK_DEFAULT 0 /* Default setting */ +#define CLOCK_EXT 1 /* External TX and RX clock - DTE */ +#define CLOCK_INT 2 /* Internal TX and RX clock - DCE */ +#define CLOCK_TXINT 3 /* Internal TX and external RX clock */ +#define CLOCK_TXFROMRX 4 /* TX clock derived from external RX clock */ + + +#define ENCODING_DEFAULT 0 /* Default setting */ +#define ENCODING_NRZ 1 +#define ENCODING_NRZI 2 +#define ENCODING_FM_MARK 3 +#define ENCODING_FM_SPACE 4 +#define ENCODING_MANCHESTER 5 + + +#define PARITY_DEFAULT 0 /* Default setting */ +#define PARITY_NONE 1 /* No parity */ +#define PARITY_CRC16_PR0 2 /* CRC16, initial value 0x0000 */ +#define PARITY_CRC16_PR1 3 /* CRC16, initial value 0xFFFF */ +#define PARITY_CRC16_PR0_CCITT 4 /* CRC16, initial 0x0000, ITU-T version */ +#define PARITY_CRC16_PR1_CCITT 5 /* CRC16, initial 0xFFFF, ITU-T version */ +#define PARITY_CRC32_PR0_CCITT 6 /* CRC32, initial value 0x00000000 */ +#define PARITY_CRC32_PR1_CCITT 7 /* CRC32, initial value 0xFFFFFFFF */ + +#define LMI_DEFAULT 0 /* Default setting */ +#define LMI_NONE 1 /* No LMI, all PVCs are static */ +#define LMI_ANSI 2 /* ANSI Annex D */ +#define LMI_CCITT 3 /* ITU-T Annex A */ +#define LMI_CISCO 4 /* The "original" LMI, aka Gang of Four */ + +#ifndef __ASSEMBLY__ + +typedef struct { + unsigned int clock_rate; /* bits per second */ + unsigned int clock_type; /* internal, external, TX-internal etc. */ + unsigned short loopback; +} sync_serial_settings; /* V.35, V.24, X.21 */ + +typedef struct { + unsigned int clock_rate; /* bits per second */ + unsigned int clock_type; /* internal, external, TX-internal etc. */ + unsigned short loopback; + unsigned int slot_map; +} te1_settings; /* T1, E1 */ + +typedef struct { + unsigned short encoding; + unsigned short parity; +} raw_hdlc_proto; + +typedef struct { + unsigned int t391; + unsigned int t392; + unsigned int n391; + unsigned int n392; + unsigned int n393; + unsigned short lmi; + unsigned short dce; /* 1 for DCE (network side) operation */ +} fr_proto; + +typedef struct { + unsigned int dlci; +} fr_proto_pvc; /* for creating/deleting FR PVCs */ + +typedef struct { + unsigned int dlci; + char master[IFNAMSIZ]; /* Name of master FRAD device */ +}fr_proto_pvc_info; /* for returning PVC information only */ + +typedef struct { + unsigned int interval; + unsigned int timeout; +} cisco_proto; + +/* PPP doesn't need any info now - supply length = 0 to ioctl */ + +#endif /* __ASSEMBLY__ */ +#endif /* __HDLC_IOCTL_H__ */ diff --git a/include/uapi/linux/hw_breakpoint.h b/include/uapi/linux/hw_breakpoint.h new file mode 100644 index 000000000000..b04000a2296a --- /dev/null +++ b/include/uapi/linux/hw_breakpoint.h @@ -0,0 +1,30 @@ +#ifndef _UAPI_LINUX_HW_BREAKPOINT_H +#define _UAPI_LINUX_HW_BREAKPOINT_H + +enum { + HW_BREAKPOINT_LEN_1 = 1, + HW_BREAKPOINT_LEN_2 = 2, + HW_BREAKPOINT_LEN_4 = 4, + HW_BREAKPOINT_LEN_8 = 8, +}; + +enum { + HW_BREAKPOINT_EMPTY = 0, + HW_BREAKPOINT_R = 1, + HW_BREAKPOINT_W = 2, + HW_BREAKPOINT_RW = HW_BREAKPOINT_R | HW_BREAKPOINT_W, + HW_BREAKPOINT_X = 4, + HW_BREAKPOINT_INVALID = HW_BREAKPOINT_RW | HW_BREAKPOINT_X, +}; + +enum bp_type_idx { + TYPE_INST = 0, +#ifdef CONFIG_HAVE_MIXED_BREAKPOINTS_REGS + TYPE_DATA = 0, +#else + TYPE_DATA = 1, +#endif + TYPE_MAX +}; + +#endif /* _UAPI_LINUX_HW_BREAKPOINT_H */ diff --git a/include/uapi/linux/if_bridge.h b/include/uapi/linux/if_bridge.h index a8fe9549ddbc..2d70d79ce2fd 100644 --- a/include/uapi/linux/if_bridge.h +++ b/include/uapi/linux/if_bridge.h @@ -97,5 +97,100 @@ struct __fdb_entry { __u16 unused; }; +/* Bridge Flags */ +#define BRIDGE_FLAGS_MASTER 1 /* Bridge command to/from master */ +#define BRIDGE_FLAGS_SELF 2 /* Bridge command to/from lowerdev */ + +#define BRIDGE_MODE_VEB 0 /* Default loopback mode */ +#define BRIDGE_MODE_VEPA 1 /* 802.1Qbg defined VEPA mode */ + +/* Bridge management nested attributes + * [IFLA_AF_SPEC] = { + * [IFLA_BRIDGE_FLAGS] + * [IFLA_BRIDGE_MODE] + * [IFLA_BRIDGE_VLAN_INFO] + * } + */ +enum { + IFLA_BRIDGE_FLAGS, + IFLA_BRIDGE_MODE, + IFLA_BRIDGE_VLAN_INFO, + __IFLA_BRIDGE_MAX, +}; +#define IFLA_BRIDGE_MAX (__IFLA_BRIDGE_MAX - 1) + +#define BRIDGE_VLAN_INFO_MASTER (1<<0) /* Operate on Bridge device as well */ +#define BRIDGE_VLAN_INFO_PVID (1<<1) /* VLAN is PVID, ingress untagged */ +#define BRIDGE_VLAN_INFO_UNTAGGED (1<<2) /* VLAN egresses untagged */ + +struct bridge_vlan_info { + __u16 flags; + __u16 vid; +}; + +/* Bridge multicast database attributes + * [MDBA_MDB] = { + * [MDBA_MDB_ENTRY] = { + * [MDBA_MDB_ENTRY_INFO] + * } + * } + * [MDBA_ROUTER] = { + * [MDBA_ROUTER_PORT] + * } + */ +enum { + MDBA_UNSPEC, + MDBA_MDB, + MDBA_ROUTER, + __MDBA_MAX, +}; +#define MDBA_MAX (__MDBA_MAX - 1) + +enum { + MDBA_MDB_UNSPEC, + MDBA_MDB_ENTRY, + __MDBA_MDB_MAX, +}; +#define MDBA_MDB_MAX (__MDBA_MDB_MAX - 1) + +enum { + MDBA_MDB_ENTRY_UNSPEC, + MDBA_MDB_ENTRY_INFO, + __MDBA_MDB_ENTRY_MAX, +}; +#define MDBA_MDB_ENTRY_MAX (__MDBA_MDB_ENTRY_MAX - 1) + +enum { + MDBA_ROUTER_UNSPEC, + MDBA_ROUTER_PORT, + __MDBA_ROUTER_MAX, +}; +#define MDBA_ROUTER_MAX (__MDBA_ROUTER_MAX - 1) + +struct br_port_msg { + __u8 family; + __u32 ifindex; +}; + +struct br_mdb_entry { + __u32 ifindex; +#define MDB_TEMPORARY 0 +#define MDB_PERMANENT 1 + __u8 state; + struct { + union { + __be32 ip4; + struct in6_addr ip6; + } u; + __be16 proto; + } addr; +}; + +enum { + MDBA_SET_ENTRY_UNSPEC, + MDBA_SET_ENTRY, + __MDBA_SET_ENTRY_MAX, +}; +#define MDBA_SET_ENTRY_MAX (__MDBA_SET_ENTRY_MAX - 1) #endif /* _UAPI_LINUX_IF_BRIDGE_H */ diff --git a/include/uapi/linux/if_ether.h b/include/uapi/linux/if_ether.h index 0343e1f0582c..798032d01112 100644 --- a/include/uapi/linux/if_ether.h +++ b/include/uapi/linux/if_ether.h @@ -48,6 +48,7 @@ #define ETH_P_BPQ 0x08FF /* G8BPQ AX.25 Ethernet Packet [ NOT AN OFFICIALLY REGISTERED ID ] */ #define ETH_P_IEEEPUP 0x0a00 /* Xerox IEEE802.3 PUP packet */ #define ETH_P_IEEEPUPAT 0x0a01 /* Xerox IEEE802.3 PUP Addr Trans packet */ +#define ETH_P_BATMAN 0x4305 /* B.A.T.M.A.N.-Advanced packet [ NOT AN OFFICIALLY REGISTERED ID ] */ #define ETH_P_DEC 0x6000 /* DEC Assigned proto */ #define ETH_P_DNA_DL 0x6001 /* DEC DNA Dump/Load */ #define ETH_P_DNA_RC 0x6002 /* DEC DNA Remote Console */ @@ -82,6 +83,7 @@ #define ETH_P_802_EX1 0x88B5 /* 802.1 Local Experimental 1. */ #define ETH_P_TIPC 0x88CA /* TIPC */ #define ETH_P_8021AH 0x88E7 /* 802.1ah Backbone Service Tag */ +#define ETH_P_MVRP 0x88F5 /* 802.1Q MVRP */ #define ETH_P_1588 0x88F7 /* IEEE 1588 Timesync */ #define ETH_P_FCOE 0x8906 /* Fibre Channel over Ethernet */ #define ETH_P_TDLS 0x890D /* TDLS */ diff --git a/include/uapi/linux/if_link.h b/include/uapi/linux/if_link.h index 5c80cb11518b..c4edfe11f1f7 100644 --- a/include/uapi/linux/if_link.h +++ b/include/uapi/linux/if_link.h @@ -142,6 +142,7 @@ enum { #define IFLA_PROMISCUITY IFLA_PROMISCUITY IFLA_NUM_TX_QUEUES, IFLA_NUM_RX_QUEUES, + IFLA_CARRIER, __IFLA_MAX }; @@ -205,6 +206,24 @@ enum { #define IFLA_INET6_MAX (__IFLA_INET6_MAX - 1) +enum { + BRIDGE_MODE_UNSPEC, + BRIDGE_MODE_HAIRPIN, +}; + +enum { + IFLA_BRPORT_UNSPEC, + IFLA_BRPORT_STATE, /* Spanning tree state */ + IFLA_BRPORT_PRIORITY, /* " priority */ + IFLA_BRPORT_COST, /* " cost */ + IFLA_BRPORT_MODE, /* mode (hairpin) */ + IFLA_BRPORT_GUARD, /* bpdu guard */ + IFLA_BRPORT_PROTECT, /* root port protection */ + IFLA_BRPORT_FAST_LEAVE, /* multicast fast leave */ + __IFLA_BRPORT_MAX +}; +#define IFLA_BRPORT_MAX (__IFLA_BRPORT_MAX - 1) + struct ifla_cacheinfo { __u32 max_reasm_len; __u32 tstamp; /* ipv6InterfaceTable updated timestamp */ @@ -285,6 +304,10 @@ enum { IFLA_VXLAN_AGEING, IFLA_VXLAN_LIMIT, IFLA_VXLAN_PORT_RANGE, + IFLA_VXLAN_PROXY, + IFLA_VXLAN_RSC, + IFLA_VXLAN_L2MISS, + IFLA_VXLAN_L3MISS, __IFLA_VXLAN_MAX }; #define IFLA_VXLAN_MAX (__IFLA_VXLAN_MAX - 1) diff --git a/include/uapi/linux/if_packet.h b/include/uapi/linux/if_packet.h index f3799295d231..f9a60375f0d0 100644 --- a/include/uapi/linux/if_packet.h +++ b/include/uapi/linux/if_packet.h @@ -50,6 +50,7 @@ struct sockaddr_ll { #define PACKET_TX_TIMESTAMP 16 #define PACKET_TIMESTAMP 17 #define PACKET_FANOUT 18 +#define PACKET_TX_HAS_OFF 19 #define PACKET_FANOUT_HASH 0 #define PACKET_FANOUT_LB 1 diff --git a/include/uapi/linux/if_tun.h b/include/uapi/linux/if_tun.h index 25a585ce23e6..2835b85fd46d 100644 --- a/include/uapi/linux/if_tun.h +++ b/include/uapi/linux/if_tun.h @@ -31,9 +31,11 @@ #define TUN_FASYNC 0x0010 #define TUN_NOCHECKSUM 0x0020 #define TUN_NO_PI 0x0040 +/* This flag has no real effect */ #define TUN_ONE_QUEUE 0x0080 #define TUN_PERSIST 0x0100 #define TUN_VNET_HDR 0x0200 +#define TUN_TAP_MQ 0x0400 /* Ioctl defines */ #define TUNSETNOCSUM _IOW('T', 200, int) @@ -53,14 +55,19 @@ #define TUNDETACHFILTER _IOW('T', 214, struct sock_fprog) #define TUNGETVNETHDRSZ _IOR('T', 215, int) #define TUNSETVNETHDRSZ _IOW('T', 216, int) +#define TUNSETQUEUE _IOW('T', 217, int) /* TUNSETIFF ifr flags */ #define IFF_TUN 0x0001 #define IFF_TAP 0x0002 #define IFF_NO_PI 0x1000 +/* This flag has no real effect */ #define IFF_ONE_QUEUE 0x2000 #define IFF_VNET_HDR 0x4000 #define IFF_TUN_EXCL 0x8000 +#define IFF_MULTI_QUEUE 0x0100 +#define IFF_ATTACH_QUEUE 0x0200 +#define IFF_DETACH_QUEUE 0x0400 /* Features for GSO (TUNSETOFFLOAD). */ #define TUN_F_CSUM 0x01 /* You can hand me unchecksummed packets. */ diff --git a/include/uapi/linux/if_tunnel.h b/include/uapi/linux/if_tunnel.h index 5db5942575fe..aee73d0611fb 100644 --- a/include/uapi/linux/if_tunnel.h +++ b/include/uapi/linux/if_tunnel.h @@ -37,6 +37,26 @@ struct ip_tunnel_parm { struct iphdr iph; }; +enum { + IFLA_IPTUN_UNSPEC, + IFLA_IPTUN_LINK, + IFLA_IPTUN_LOCAL, + IFLA_IPTUN_REMOTE, + IFLA_IPTUN_TTL, + IFLA_IPTUN_TOS, + IFLA_IPTUN_ENCAP_LIMIT, + IFLA_IPTUN_FLOWINFO, + IFLA_IPTUN_FLAGS, + IFLA_IPTUN_PROTO, + IFLA_IPTUN_PMTUDISC, + IFLA_IPTUN_6RD_PREFIX, + IFLA_IPTUN_6RD_RELAY_PREFIX, + IFLA_IPTUN_6RD_PREFIXLEN, + IFLA_IPTUN_6RD_RELAY_PREFIXLEN, + __IFLA_IPTUN_MAX, +}; +#define IFLA_IPTUN_MAX (__IFLA_IPTUN_MAX - 1) + /* SIT-mode i_flags */ #define SIT_ISATAP 0x0001 diff --git a/include/uapi/linux/if_vlan.h b/include/uapi/linux/if_vlan.h index 0744f8e65d15..7e5e6b397332 100644 --- a/include/uapi/linux/if_vlan.h +++ b/include/uapi/linux/if_vlan.h @@ -34,6 +34,7 @@ enum vlan_flags { VLAN_FLAG_REORDER_HDR = 0x1, VLAN_FLAG_GVRP = 0x2, VLAN_FLAG_LOOSE_BINDING = 0x4, + VLAN_FLAG_MVRP = 0x8, }; enum vlan_name_types { diff --git a/include/uapi/linux/in6.h b/include/uapi/linux/in6.h index 1e3159989958..53b1d56a6e7f 100644 --- a/include/uapi/linux/in6.h +++ b/include/uapi/linux/in6.h @@ -38,11 +38,6 @@ struct in6_addr { #define s6_addr32 in6_u.u6_addr32 }; -/* IPv6 Wildcard Address (::) and Loopback Address (::1) defined in RFC2553 - * NOTE: Be aware the IN6ADDR_* constants and in6addr_* externals are defined - * in network byte order, not in host byte order as are the IPv4 equivalents - */ - struct sockaddr_in6 { unsigned short int sin6_family; /* AF_INET6 */ __be16 sin6_port; /* Transport layer port # */ @@ -240,6 +235,7 @@ struct in6_flowlabel_req { * * IP6T_SO_GET_REVISION_MATCH 68 * IP6T_SO_GET_REVISION_TARGET 69 + * IP6T_SO_ORIGINAL_DST 80 */ /* RFC5014: Source address selection */ @@ -263,17 +259,10 @@ struct in6_flowlabel_req { /* * Multicast Routing: - * see include/linux/mroute6.h. + * see include/uapi/linux/mroute6.h. * - * MRT6_INIT 200 - * MRT6_DONE 201 - * MRT6_ADD_MIF 202 - * MRT6_DEL_MIF 203 - * MRT6_ADD_MFC 204 - * MRT6_DEL_MFC 205 - * MRT6_VERSION 206 - * MRT6_ASSERT 207 - * MRT6_PIM 208 - * (reserved) 209 + * MRT6_BASE 200 + * ... + * MRT6_MAX */ #endif /* _UAPI_LINUX_IN6_H */ diff --git a/include/uapi/linux/inet_diag.h b/include/uapi/linux/inet_diag.h index 8c469af939aa..bbde90fa5838 100644 --- a/include/uapi/linux/inet_diag.h +++ b/include/uapi/linux/inet_diag.h @@ -109,9 +109,10 @@ enum { INET_DIAG_TOS, INET_DIAG_TCLASS, INET_DIAG_SKMEMINFO, + INET_DIAG_SHUTDOWN, }; -#define INET_DIAG_MAX INET_DIAG_SKMEMINFO +#define INET_DIAG_MAX INET_DIAG_SHUTDOWN /* INET_DIAG_MEM */ diff --git a/include/uapi/linux/input.h b/include/uapi/linux/input.h index 6e4e3c6b3961..4649ee35b605 100644 --- a/include/uapi/linux/input.h +++ b/include/uapi/linux/input.h @@ -856,6 +856,7 @@ struct input_keymap_entry { #define MSC_GESTURE 0x02 #define MSC_RAW 0x03 #define MSC_SCAN 0x04 +#define MSC_TIMESTAMP 0x05 #define MSC_MAX 0x07 #define MSC_CNT (MSC_MAX+1) diff --git a/include/uapi/linux/ipmi.h b/include/uapi/linux/ipmi.h index 33fbc99b3812..7b26a62e5707 100644 --- a/include/uapi/linux/ipmi.h +++ b/include/uapi/linux/ipmi.h @@ -59,15 +59,7 @@ * if it becomes full and it is queried once a second to see if * anything is in it. Incoming commands to the driver will get * delivered as commands. - * - * This driver provides two main interfaces: one for in-kernel - * applications and another for userland applications. The - * capabilities are basically the same for both interface, although - * the interfaces are somewhat different. The stuff in the - * #ifdef __KERNEL__ below is the in-kernel interface. The userland - * interface is defined later in the file. */ - - + */ /* * This is an overlay for all the address types, so it's easy to diff --git a/include/uapi/linux/ipv6.h b/include/uapi/linux/ipv6.h index a6d7d1c536c3..4bda4cf5b0f5 100644 --- a/include/uapi/linux/ipv6.h +++ b/include/uapi/linux/ipv6.h @@ -63,6 +63,8 @@ struct ipv6_opt_hdr { #define ipv6_destopt_hdr ipv6_opt_hdr #define ipv6_hopopt_hdr ipv6_opt_hdr +/* Router Alert option values (RFC2711) */ +#define IPV6_OPT_ROUTERALERT_MLD 0x0000 /* MLD(RFC2710) */ /* * routing header type 0 (used in cmsghdr struct) @@ -157,6 +159,7 @@ enum { DEVCONF_DISABLE_IPV6, DEVCONF_ACCEPT_DAD, DEVCONF_FORCE_TLLAO, + DEVCONF_NDISC_NOTIFY, DEVCONF_MAX }; diff --git a/include/uapi/linux/ipv6_route.h b/include/uapi/linux/ipv6_route.h index 0459664c2636..2be7bd174751 100644 --- a/include/uapi/linux/ipv6_route.h +++ b/include/uapi/linux/ipv6_route.h @@ -55,4 +55,7 @@ struct in6_rtmsg { #define RTMSG_NEWROUTE 0x21 #define RTMSG_DELROUTE 0x22 +#define IP6_RT_PRIO_USER 1024 +#define IP6_RT_PRIO_ADDRCONF 256 + #endif /* _UAPI_LINUX_IPV6_ROUTE_H */ diff --git a/include/uapi/linux/kvm.h b/include/uapi/linux/kvm.h index 0a6d6ba44c85..3c56ba3d80c1 100644 --- a/include/uapi/linux/kvm.h +++ b/include/uapi/linux/kvm.h @@ -115,6 +115,7 @@ struct kvm_irq_level { * ACPI gsi notion of irq. * For IA-64 (APIC model) IOAPIC0: irq 0-23; IOAPIC1: irq 24-47.. * For X86 (standard AT mode) PIC0/1: irq 0-15. IOAPIC0: 0-23.. + * For ARM: See Documentation/virtual/kvm/api.txt */ union { __u32 irq; @@ -167,10 +168,17 @@ struct kvm_pit_config { #define KVM_EXIT_OSI 18 #define KVM_EXIT_PAPR_HCALL 19 #define KVM_EXIT_S390_UCONTROL 20 +#define KVM_EXIT_WATCHDOG 21 +#define KVM_EXIT_S390_TSCH 22 +#define KVM_EXIT_EPR 23 /* For KVM_EXIT_INTERNAL_ERROR */ -#define KVM_INTERNAL_ERROR_EMULATION 1 -#define KVM_INTERNAL_ERROR_SIMUL_EX 2 +/* Emulate instruction failed. */ +#define KVM_INTERNAL_ERROR_EMULATION 1 +/* Encounter unexpected simultaneous exceptions. */ +#define KVM_INTERNAL_ERROR_SIMUL_EX 2 +/* Encounter unexpected vm-exit due to delivery event. */ +#define KVM_INTERNAL_ERROR_DELIVERY_EV 3 /* for KVM_RUN, returned by mmap(vcpu_fd, offset=0) */ struct kvm_run { @@ -280,6 +288,19 @@ struct kvm_run { __u64 ret; __u64 args[9]; } papr_hcall; + /* KVM_EXIT_S390_TSCH */ + struct { + __u16 subchannel_id; + __u16 subchannel_nr; + __u32 io_int_parm; + __u32 io_int_word; + __u32 ipb; + __u8 dequeued; + } s390_tsch; + /* KVM_EXIT_EPR */ + struct { + __u32 epr; + } epr; /* Fix the size of the union. */ char padding[256]; }; @@ -392,10 +413,20 @@ struct kvm_s390_psw { #define KVM_S390_PROGRAM_INT 0xfffe0001u #define KVM_S390_SIGP_SET_PREFIX 0xfffe0002u #define KVM_S390_RESTART 0xfffe0003u +#define KVM_S390_MCHK 0xfffe1000u #define KVM_S390_INT_VIRTIO 0xffff2603u #define KVM_S390_INT_SERVICE 0xffff2401u #define KVM_S390_INT_EMERGENCY 0xffff1201u #define KVM_S390_INT_EXTERNAL_CALL 0xffff1202u +/* Anything below 0xfffe0000u is taken by INT_IO */ +#define KVM_S390_INT_IO(ai,cssid,ssid,schid) \ + (((schid)) | \ + ((ssid) << 16) | \ + ((cssid) << 18) | \ + ((ai) << 26)) +#define KVM_S390_INT_IO_MIN 0x00000000u +#define KVM_S390_INT_IO_MAX 0xfffdffffu + struct kvm_s390_interrupt { __u32 type; @@ -477,6 +508,8 @@ struct kvm_ppc_smmu_info { struct kvm_ppc_one_seg_page_size sps[KVM_PPC_PAGE_SIZES_MAX_SZ]; }; +#define KVM_PPC_PVINFO_FLAGS_EV_IDLE (1<<0) + #define KVMIO 0xAE /* machine type bits, to be used as argument to KVM_CREATE_VM */ @@ -626,6 +659,12 @@ struct kvm_ppc_smmu_info { #define KVM_CAP_READONLY_MEM 81 #endif #define KVM_CAP_IRQFD_RESAMPLE 82 +#define KVM_CAP_PPC_BOOKE_WATCHDOG 83 +#define KVM_CAP_PPC_HTAB_FD 84 +#define KVM_CAP_S390_CSS_SUPPORT 85 +#define KVM_CAP_PPC_EPR 86 +#define KVM_CAP_ARM_PSCI 87 +#define KVM_CAP_ARM_SET_DEVICE_ADDR 88 #ifdef KVM_CAP_IRQ_ROUTING @@ -755,6 +794,11 @@ struct kvm_dirty_tlb { #define KVM_REG_SIZE_U512 0x0060000000000000ULL #define KVM_REG_SIZE_U1024 0x0070000000000000ULL +struct kvm_reg_list { + __u64 n; /* number of regs */ + __u64 reg[0]; +}; + struct kvm_one_reg { __u64 id; __u64 addr; @@ -768,6 +812,11 @@ struct kvm_msi { __u8 pad[16]; }; +struct kvm_arm_device_addr { + __u64 id; + __u64 addr; +}; + /* * ioctls for VM fds */ @@ -848,6 +897,13 @@ struct kvm_s390_ucas_mapping { #define KVM_PPC_GET_SMMU_INFO _IOR(KVMIO, 0xa6, struct kvm_ppc_smmu_info) /* Available with KVM_CAP_PPC_ALLOC_HTAB */ #define KVM_PPC_ALLOCATE_HTAB _IOWR(KVMIO, 0xa7, __u32) +#define KVM_CREATE_SPAPR_TCE _IOW(KVMIO, 0xa8, struct kvm_create_spapr_tce) +/* Available with KVM_CAP_RMA */ +#define KVM_ALLOCATE_RMA _IOR(KVMIO, 0xa9, struct kvm_allocate_rma) +/* Available with KVM_CAP_PPC_HTAB_FD */ +#define KVM_PPC_GET_HTAB_FD _IOW(KVMIO, 0xaa, struct kvm_get_htab_fd) +/* Available with KVM_CAP_ARM_SET_DEVICE_ADDR */ +#define KVM_ARM_SET_DEVICE_ADDR _IOW(KVMIO, 0xab, struct kvm_arm_device_addr) /* * ioctls for vcpu fds @@ -911,9 +967,6 @@ struct kvm_s390_ucas_mapping { /* Available with KVM_CAP_XCRS */ #define KVM_GET_XCRS _IOR(KVMIO, 0xa6, struct kvm_xcrs) #define KVM_SET_XCRS _IOW(KVMIO, 0xa7, struct kvm_xcrs) -#define KVM_CREATE_SPAPR_TCE _IOW(KVMIO, 0xa8, struct kvm_create_spapr_tce) -/* Available with KVM_CAP_RMA */ -#define KVM_ALLOCATE_RMA _IOR(KVMIO, 0xa9, struct kvm_allocate_rma) /* Available with KVM_CAP_SW_TLB */ #define KVM_DIRTY_TLB _IOW(KVMIO, 0xaa, struct kvm_dirty_tlb) /* Available with KVM_CAP_ONE_REG */ @@ -921,6 +974,8 @@ struct kvm_s390_ucas_mapping { #define KVM_SET_ONE_REG _IOW(KVMIO, 0xac, struct kvm_one_reg) /* VM is being stopped by host */ #define KVM_KVMCLOCK_CTRL _IO(KVMIO, 0xad) +#define KVM_ARM_VCPU_INIT _IOW(KVMIO, 0xae, struct kvm_vcpu_init) +#define KVM_GET_REG_LIST _IOWR(KVMIO, 0xb0, struct kvm_reg_list) #define KVM_DEV_ASSIGN_ENABLE_IOMMU (1 << 0) #define KVM_DEV_ASSIGN_PCI_2_3 (1 << 1) diff --git a/include/uapi/linux/magic.h b/include/uapi/linux/magic.h index e15192cb9cf4..873e086ce3a1 100644 --- a/include/uapi/linux/magic.h +++ b/include/uapi/linux/magic.h @@ -23,10 +23,12 @@ #define EXT4_SUPER_MAGIC 0xEF53 #define BTRFS_SUPER_MAGIC 0x9123683E #define NILFS_SUPER_MAGIC 0x3434 +#define F2FS_SUPER_MAGIC 0xF2F52010 #define HPFS_SUPER_MAGIC 0xf995e849 #define ISOFS_SUPER_MAGIC 0x9660 #define JFFS2_SUPER_MAGIC 0x72b6 #define PSTOREFS_MAGIC 0x6165676C +#define EFIVARFS_MAGIC 0xde5e81e4 #define MINIX_SUPER_MAGIC 0x137F /* minix v1 fs, 14 char names */ #define MINIX_SUPER_MAGIC2 0x138F /* minix v1 fs, 30 char names */ diff --git a/include/uapi/linux/mempolicy.h b/include/uapi/linux/mempolicy.h index 23e62e0537e2..0d11c3dcd3a1 100644 --- a/include/uapi/linux/mempolicy.h +++ b/include/uapi/linux/mempolicy.h @@ -20,6 +20,7 @@ enum { MPOL_PREFERRED, MPOL_BIND, MPOL_INTERLEAVE, + MPOL_LOCAL, MPOL_MAX, /* always last member of enum */ }; @@ -47,9 +48,15 @@ enum mpol_rebind_step { /* Flags for mbind */ #define MPOL_MF_STRICT (1<<0) /* Verify existing pages in the mapping */ -#define MPOL_MF_MOVE (1<<1) /* Move pages owned by this process to conform to mapping */ -#define MPOL_MF_MOVE_ALL (1<<2) /* Move every page to conform to mapping */ -#define MPOL_MF_INTERNAL (1<<3) /* Internal flags start here */ +#define MPOL_MF_MOVE (1<<1) /* Move pages owned by this process to conform + to policy */ +#define MPOL_MF_MOVE_ALL (1<<2) /* Move every page to conform to policy */ +#define MPOL_MF_LAZY (1<<3) /* Modifies '_MOVE: lazy migrate on fault */ +#define MPOL_MF_INTERNAL (1<<4) /* Internal flags start here */ + +#define MPOL_MF_VALID (MPOL_MF_STRICT | \ + MPOL_MF_MOVE | \ + MPOL_MF_MOVE_ALL) /* * Internal flags that share the struct mempolicy flags word with @@ -59,6 +66,8 @@ enum mpol_rebind_step { #define MPOL_F_SHARED (1 << 0) /* identify shared policies */ #define MPOL_F_LOCAL (1 << 1) /* preferred local allocation */ #define MPOL_F_REBINDING (1 << 2) /* identify policies in rebinding */ +#define MPOL_F_MOF (1 << 3) /* this policy wants migrate on fault */ +#define MPOL_F_MORON (1 << 4) /* Migrate On pte_numa Reference On Node */ #endif /* _UAPI_LINUX_MEMPOLICY_H */ diff --git a/include/uapi/linux/meye.h b/include/uapi/linux/meye.h index 0dd49954f746..8ff50fe9e481 100644 --- a/include/uapi/linux/meye.h +++ b/include/uapi/linux/meye.h @@ -57,10 +57,8 @@ struct meye_params { #define MEYEIOC_STILLJCAPT _IOR ('v', BASE_VIDIOC_PRIVATE+5, int) /* V4L2 private controls */ -#define V4L2_CID_AGC V4L2_CID_PRIVATE_BASE -#define V4L2_CID_MEYE_SHARPNESS (V4L2_CID_PRIVATE_BASE + 1) -#define V4L2_CID_PICTURE (V4L2_CID_PRIVATE_BASE + 2) -#define V4L2_CID_JPEGQUAL (V4L2_CID_PRIVATE_BASE + 3) -#define V4L2_CID_FRAMERATE (V4L2_CID_PRIVATE_BASE + 4) +#define V4L2_CID_MEYE_AGC (V4L2_CID_USER_MEYE_BASE + 0) +#define V4L2_CID_MEYE_PICTURE (V4L2_CID_USER_MEYE_BASE + 1) +#define V4L2_CID_MEYE_FRAMERATE (V4L2_CID_USER_MEYE_BASE + 2) #endif diff --git a/include/uapi/linux/module.h b/include/uapi/linux/module.h new file mode 100644 index 000000000000..38da4258b12f --- /dev/null +++ b/include/uapi/linux/module.h @@ -0,0 +1,8 @@ +#ifndef _UAPI_LINUX_MODULE_H +#define _UAPI_LINUX_MODULE_H + +/* Flags for sys_finit_module: */ +#define MODULE_INIT_IGNORE_MODVERSIONS 1 +#define MODULE_INIT_IGNORE_VERMAGIC 2 + +#endif /* _UAPI_LINUX_MODULE_H */ diff --git a/include/uapi/linux/mroute.h b/include/uapi/linux/mroute.h index 16929993acc4..a382d2c04a42 100644 --- a/include/uapi/linux/mroute.h +++ b/include/uapi/linux/mroute.h @@ -26,6 +26,9 @@ #define MRT_ASSERT (MRT_BASE+7) /* Activate PIM assert mode */ #define MRT_PIM (MRT_BASE+8) /* enable PIM code */ #define MRT_TABLE (MRT_BASE+9) /* Specify mroute table ID */ +#define MRT_ADD_MFC_PROXY (MRT_BASE+10) /* Add a (*,*|G) mfc entry */ +#define MRT_DEL_MFC_PROXY (MRT_BASE+11) /* Del a (*,*|G) mfc entry */ +#define MRT_MAX (MRT_BASE+11) #define SIOCGETVIFCNT SIOCPROTOPRIVATE /* IP protocol privates */ #define SIOCGETSGCNT (SIOCPROTOPRIVATE+1) diff --git a/include/uapi/linux/mroute6.h b/include/uapi/linux/mroute6.h index 3e89b5e7f9e3..ce91215cf7e6 100644 --- a/include/uapi/linux/mroute6.h +++ b/include/uapi/linux/mroute6.h @@ -26,6 +26,9 @@ #define MRT6_ASSERT (MRT6_BASE+7) /* Activate PIM assert mode */ #define MRT6_PIM (MRT6_BASE+8) /* enable PIM code */ #define MRT6_TABLE (MRT6_BASE+9) /* Specify mroute table ID */ +#define MRT6_ADD_MFC_PROXY (MRT6_BASE+10) /* Add a (*,*|G) mfc entry */ +#define MRT6_DEL_MFC_PROXY (MRT6_BASE+11) /* Del a (*,*|G) mfc entry */ +#define MRT6_MAX (MRT6_BASE+11) #define SIOCGETMIFCNT_IN6 SIOCPROTOPRIVATE /* IP protocol privates */ #define SIOCGETSGCNT_IN6 (SIOCPROTOPRIVATE+1) diff --git a/include/uapi/linux/msdos_fs.h b/include/uapi/linux/msdos_fs.h index 996719f82e28..f055e58b3147 100644 --- a/include/uapi/linux/msdos_fs.h +++ b/include/uapi/linux/msdos_fs.h @@ -87,6 +87,8 @@ #define IS_FSINFO(x) (le32_to_cpu((x)->signature1) == FAT_FSINFO_SIG1 \ && le32_to_cpu((x)->signature2) == FAT_FSINFO_SIG2) +#define FAT_STATE_DIRTY 0x01 + struct __fat_dirent { long d_ino; __kernel_off_t d_off; @@ -120,14 +122,34 @@ struct fat_boot_sector { __le32 hidden; /* hidden sectors (unused) */ __le32 total_sect; /* number of sectors (if sectors == 0) */ - /* The following fields are only used by FAT32 */ - __le32 fat32_length; /* sectors/FAT */ - __le16 flags; /* bit 8: fat mirroring, low 4: active fat */ - __u8 version[2]; /* major, minor filesystem version */ - __le32 root_cluster; /* first cluster in root directory */ - __le16 info_sector; /* filesystem info sector */ - __le16 backup_boot; /* backup boot sector */ - __le16 reserved2[6]; /* Unused */ + union { + struct { + /* Extended BPB Fields for FAT16 */ + __u8 drive_number; /* Physical drive number */ + __u8 state; /* undocumented, but used + for mount state. */ + /* other fiealds are not added here */ + } fat16; + + struct { + /* only used by FAT32 */ + __le32 length; /* sectors/FAT */ + __le16 flags; /* bit 8: fat mirroring, + low 4: active fat */ + __u8 version[2]; /* major, minor filesystem + version */ + __le32 root_cluster; /* first cluster in + root directory */ + __le16 info_sector; /* filesystem info sector */ + __le16 backup_boot; /* backup boot sector */ + __le16 reserved2[6]; /* Unused */ + /* Extended BPB Fields for FAT32 */ + __u8 drive_number; /* Physical drive number */ + __u8 state; /* undocumented, but used + for mount state. */ + /* other fiealds are not added here */ + } fat32; + }; }; struct fat_boot_fsinfo { diff --git a/include/uapi/linux/msg.h b/include/uapi/linux/msg.h index 78dbd2f996a3..22d95c6854e0 100644 --- a/include/uapi/linux/msg.h +++ b/include/uapi/linux/msg.h @@ -10,6 +10,7 @@ /* msgrcv options */ #define MSG_NOERROR 010000 /* no error if message is too big */ #define MSG_EXCEPT 020000 /* recv any msg except of specified type.*/ +#define MSG_COPY 040000 /* copy (not remove) all queue messages */ /* Obsolete, used only for backwards compatibility and libc5 compiles */ struct msqid_ds { diff --git a/include/uapi/linux/nbd.h b/include/uapi/linux/nbd.h index dfb514472cbc..4f52549b23ff 100644 --- a/include/uapi/linux/nbd.h +++ b/include/uapi/linux/nbd.h @@ -33,13 +33,14 @@ enum { NBD_CMD_READ = 0, NBD_CMD_WRITE = 1, NBD_CMD_DISC = 2, - /* there is a gap here to match userspace */ + NBD_CMD_FLUSH = 3, NBD_CMD_TRIM = 4 }; /* values for flags field */ #define NBD_FLAG_HAS_FLAGS (1 << 0) /* nbd-server supports flags */ #define NBD_FLAG_READ_ONLY (1 << 1) /* device is read-only */ +#define NBD_FLAG_SEND_FLUSH (1 << 2) /* can flush writeback cache */ /* there is a gap here to match userspace */ #define NBD_FLAG_SEND_TRIM (1 << 5) /* send trim/discard */ diff --git a/include/uapi/linux/neighbour.h b/include/uapi/linux/neighbour.h index 275e5d65dcb2..adb068c53c4e 100644 --- a/include/uapi/linux/neighbour.h +++ b/include/uapi/linux/neighbour.h @@ -20,6 +20,7 @@ enum { NDA_LLADDR, NDA_CACHEINFO, NDA_PROBES, + NDA_VLAN, __NDA_MAX }; diff --git a/include/uapi/linux/netconf.h b/include/uapi/linux/netconf.h new file mode 100644 index 000000000000..64804a798b0c --- /dev/null +++ b/include/uapi/linux/netconf.h @@ -0,0 +1,24 @@ +#ifndef _UAPI_LINUX_NETCONF_H_ +#define _UAPI_LINUX_NETCONF_H_ + +#include <linux/types.h> +#include <linux/netlink.h> + +struct netconfmsg { + __u8 ncm_family; +}; + +enum { + NETCONFA_UNSPEC, + NETCONFA_IFINDEX, + NETCONFA_FORWARDING, + NETCONFA_RP_FILTER, + NETCONFA_MC_FORWARDING, + __NETCONFA_MAX +}; +#define NETCONFA_MAX (__NETCONFA_MAX - 1) + +#define NETCONFA_IFINDEX_ALL -1 +#define NETCONFA_IFINDEX_DEFAULT -2 + +#endif /* _UAPI_LINUX_NETCONF_H_ */ diff --git a/include/uapi/linux/netfilter/Kbuild b/include/uapi/linux/netfilter/Kbuild index 08f555fef13f..41115776d76f 100644 --- a/include/uapi/linux/netfilter/Kbuild +++ b/include/uapi/linux/netfilter/Kbuild @@ -35,9 +35,11 @@ header-y += xt_TCPOPTSTRIP.h header-y += xt_TEE.h header-y += xt_TPROXY.h header-y += xt_addrtype.h +header-y += xt_bpf.h header-y += xt_cluster.h header-y += xt_comment.h header-y += xt_connbytes.h +header-y += xt_connlabel.h header-y += xt_connlimit.h header-y += xt_connmark.h header-y += xt_conntrack.h diff --git a/include/uapi/linux/netfilter/nf_conntrack_common.h b/include/uapi/linux/netfilter/nf_conntrack_common.h index 1644cdd8be91..d69483fb3825 100644 --- a/include/uapi/linux/netfilter/nf_conntrack_common.h +++ b/include/uapi/linux/netfilter/nf_conntrack_common.h @@ -101,6 +101,7 @@ enum ip_conntrack_events { IPCT_MARK, /* new mark has been set */ IPCT_NATSEQADJ, /* NAT is doing sequence adjustment */ IPCT_SECMARK, /* new security mark has been set */ + IPCT_LABEL, /* new connlabel has been set */ }; enum ip_conntrack_expect_events { diff --git a/include/uapi/linux/netfilter/nfnetlink_conntrack.h b/include/uapi/linux/netfilter/nfnetlink_conntrack.h index 43bfe3e1685b..08fabc6c93f3 100644 --- a/include/uapi/linux/netfilter/nfnetlink_conntrack.h +++ b/include/uapi/linux/netfilter/nfnetlink_conntrack.h @@ -9,6 +9,8 @@ enum cntl_msg_types { IPCTNL_MSG_CT_GET_CTRZERO, IPCTNL_MSG_CT_GET_STATS_CPU, IPCTNL_MSG_CT_GET_STATS, + IPCTNL_MSG_CT_GET_DYING, + IPCTNL_MSG_CT_GET_UNCONFIRMED, IPCTNL_MSG_MAX }; @@ -47,6 +49,8 @@ enum ctattr_type { CTA_SECCTX, CTA_TIMESTAMP, CTA_MARK_MASK, + CTA_LABELS, + CTA_LABELS_MASK, __CTA_MAX }; #define CTA_MAX (__CTA_MAX - 1) diff --git a/include/uapi/linux/netfilter/xt_CT.h b/include/uapi/linux/netfilter/xt_CT.h index a064b8af360c..5a688c1ca4d7 100644 --- a/include/uapi/linux/netfilter/xt_CT.h +++ b/include/uapi/linux/netfilter/xt_CT.h @@ -3,7 +3,11 @@ #include <linux/types.h> -#define XT_CT_NOTRACK 0x1 +enum { + XT_CT_NOTRACK = 1 << 0, + XT_CT_NOTRACK_ALIAS = 1 << 1, + XT_CT_MASK = XT_CT_NOTRACK | XT_CT_NOTRACK_ALIAS, +}; struct xt_ct_target_info { __u16 flags; diff --git a/include/uapi/linux/netfilter/xt_bpf.h b/include/uapi/linux/netfilter/xt_bpf.h new file mode 100644 index 000000000000..5dda450eb55b --- /dev/null +++ b/include/uapi/linux/netfilter/xt_bpf.h @@ -0,0 +1,17 @@ +#ifndef _XT_BPF_H +#define _XT_BPF_H + +#include <linux/filter.h> +#include <linux/types.h> + +#define XT_BPF_MAX_NUM_INSTR 64 + +struct xt_bpf_info { + __u16 bpf_program_num_elem; + struct sock_filter bpf_program[XT_BPF_MAX_NUM_INSTR]; + + /* only used in the kernel */ + struct sk_filter *filter __attribute__((aligned(8))); +}; + +#endif /*_XT_BPF_H */ diff --git a/include/uapi/linux/netfilter/xt_connlabel.h b/include/uapi/linux/netfilter/xt_connlabel.h new file mode 100644 index 000000000000..c4bc9ee9b330 --- /dev/null +++ b/include/uapi/linux/netfilter/xt_connlabel.h @@ -0,0 +1,12 @@ +#include <linux/types.h> + +#define XT_CONNLABEL_MAXBIT 127 +enum xt_connlabel_mtopts { + XT_CONNLABEL_OP_INVERT = 1 << 0, + XT_CONNLABEL_OP_SET = 1 << 1, +}; + +struct xt_connlabel_mtinfo { + __u16 bit; + __u16 options; +}; diff --git a/include/uapi/linux/netfilter/xt_conntrack.h b/include/uapi/linux/netfilter/xt_conntrack.h index e3c041d54020..e5bd3083a843 100644 --- a/include/uapi/linux/netfilter/xt_conntrack.h +++ b/include/uapi/linux/netfilter/xt_conntrack.h @@ -31,6 +31,7 @@ enum { XT_CONNTRACK_REPLSRC_PORT = 1 << 10, XT_CONNTRACK_REPLDST_PORT = 1 << 11, XT_CONNTRACK_DIRECTION = 1 << 12, + XT_CONNTRACK_STATE_ALIAS = 1 << 13, }; struct xt_conntrack_mtinfo1 { diff --git a/include/uapi/linux/netfilter_ipv6/ip6_tables.h b/include/uapi/linux/netfilter_ipv6/ip6_tables.h index bf1ef65cc582..649c68062dca 100644 --- a/include/uapi/linux/netfilter_ipv6/ip6_tables.h +++ b/include/uapi/linux/netfilter_ipv6/ip6_tables.h @@ -178,6 +178,9 @@ struct ip6t_error { #define IP6T_SO_GET_REVISION_TARGET (IP6T_BASE_CTL + 5) #define IP6T_SO_GET_MAX IP6T_SO_GET_REVISION_TARGET +/* obtain original address if REDIRECT'd connection */ +#define IP6T_SO_ORIGINAL_DST 80 + /* ICMP matching stuff */ struct ip6t_icmp { __u8 type; /* type to match */ diff --git a/include/uapi/linux/nfc.h b/include/uapi/linux/nfc.h index d908d17da56d..7969f46f1bb3 100644 --- a/include/uapi/linux/nfc.h +++ b/include/uapi/linux/nfc.h @@ -5,20 +5,17 @@ * Lauro Ramos Venancio <lauro.venancio@openbossa.org> * Aloisio Almeida Jr <aloisio.almeida@openbossa.org> * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. + * Permission to use, copy, modify, and/or distribute this software for any + * purpose with or without fee is hereby granted, provided that the above + * copyright notice and this permission notice appear in all copies. * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the - * Free Software Foundation, Inc., - * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. + * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES + * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR + * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES + * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN + * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF + * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. */ #ifndef __LINUX_NFC_H @@ -60,6 +57,18 @@ * target mode. * @NFC_EVENT_DEVICE_DEACTIVATED: event emitted when the adapter is deactivated * from target mode. + * @NFC_CMD_LLC_GET_PARAMS: request LTO, RW, and MIUX parameters for a device + * @NFC_CMD_LLC_SET_PARAMS: set one or more of LTO, RW, and MIUX parameters for + * a device. LTO must be set before the link is up otherwise -EINPROGRESS + * is returned. RW and MIUX can be set at anytime and will be passed in + * subsequent CONNECT and CC messages. + * If one of the passed parameters is wrong none is set and -EINVAL is + * returned. + * @NFC_CMD_ENABLE_SE: Enable the physical link to a specific secure element. + * Once enabled a secure element will handle card emulation mode, i.e. + * starting a poll from a device which has a secure element enabled means + * we want to do SE based card emulation. + * @NFC_CMD_DISABLE_SE: Disable the physical link to a specific secure element. */ enum nfc_commands { NFC_CMD_UNSPEC, @@ -77,6 +86,10 @@ enum nfc_commands { NFC_EVENT_TARGET_LOST, NFC_EVENT_TM_ACTIVATED, NFC_EVENT_TM_DEACTIVATED, + NFC_CMD_LLC_GET_PARAMS, + NFC_CMD_LLC_SET_PARAMS, + NFC_CMD_ENABLE_SE, + NFC_CMD_DISABLE_SE, /* private: internal use only */ __NFC_CMD_AFTER_LAST }; @@ -102,6 +115,10 @@ enum nfc_commands { * @NFC_ATTR_RF_MODE: Initiator or target * @NFC_ATTR_IM_PROTOCOLS: Initiator mode protocols to poll for * @NFC_ATTR_TM_PROTOCOLS: Target mode protocols to listen for + * @NFC_ATTR_LLC_PARAM_LTO: Link TimeOut parameter + * @NFC_ATTR_LLC_PARAM_RW: Receive Window size parameter + * @NFC_ATTR_LLC_PARAM_MIUX: MIU eXtension parameter + * @NFC_ATTR_SE: Available Secure Elements */ enum nfc_attrs { NFC_ATTR_UNSPEC, @@ -119,6 +136,10 @@ enum nfc_attrs { NFC_ATTR_DEVICE_POWERED, NFC_ATTR_IM_PROTOCOLS, NFC_ATTR_TM_PROTOCOLS, + NFC_ATTR_LLC_PARAM_LTO, + NFC_ATTR_LLC_PARAM_RW, + NFC_ATTR_LLC_PARAM_MIUX, + NFC_ATTR_SE, /* private: internal use only */ __NFC_ATTR_AFTER_LAST }; @@ -157,6 +178,11 @@ enum nfc_attrs { #define NFC_PROTO_NFC_DEP_MASK (1 << NFC_PROTO_NFC_DEP) #define NFC_PROTO_ISO14443_B_MASK (1 << NFC_PROTO_ISO14443_B) +/* NFC Secure Elements */ +#define NFC_SE_NONE 0x0 +#define NFC_SE_UICC 0x1 +#define NFC_SE_EMBEDDED 0x2 + struct sockaddr_nfc { sa_family_t sa_family; __u32 dev_idx; diff --git a/include/uapi/linux/nl80211.h b/include/uapi/linux/nl80211.h index 7df9b500c804..c46bb016f4e4 100644 --- a/include/uapi/linux/nl80211.h +++ b/include/uapi/linux/nl80211.h @@ -118,8 +118,9 @@ * to get a list of all present wiphys. * @NL80211_CMD_SET_WIPHY: set wiphy parameters, needs %NL80211_ATTR_WIPHY or * %NL80211_ATTR_IFINDEX; can be used to set %NL80211_ATTR_WIPHY_NAME, - * %NL80211_ATTR_WIPHY_TXQ_PARAMS, %NL80211_ATTR_WIPHY_FREQ, - * %NL80211_ATTR_WIPHY_CHANNEL_TYPE, %NL80211_ATTR_WIPHY_RETRY_SHORT, + * %NL80211_ATTR_WIPHY_TXQ_PARAMS, %NL80211_ATTR_WIPHY_FREQ (and the + * attributes determining the channel width; this is used for setting + * monitor mode channel), %NL80211_ATTR_WIPHY_RETRY_SHORT, * %NL80211_ATTR_WIPHY_RETRY_LONG, %NL80211_ATTR_WIPHY_FRAG_THRESHOLD, * and/or %NL80211_ATTR_WIPHY_RTS_THRESHOLD. * However, for setting the channel, see %NL80211_CMD_SET_CHANNEL @@ -169,9 +170,10 @@ * %NL80211_ATTR_HIDDEN_SSID, %NL80211_ATTR_CIPHERS_PAIRWISE, * %NL80211_ATTR_CIPHER_GROUP, %NL80211_ATTR_WPA_VERSIONS, * %NL80211_ATTR_AKM_SUITES, %NL80211_ATTR_PRIVACY, - * %NL80211_ATTR_AUTH_TYPE and %NL80211_ATTR_INACTIVITY_TIMEOUT. + * %NL80211_ATTR_AUTH_TYPE, %NL80211_ATTR_INACTIVITY_TIMEOUT, + * %NL80211_ATTR_ACL_POLICY and %NL80211_ATTR_MAC_ADDRS. * The channel to use can be set on the interface or be given using the - * %NL80211_ATTR_WIPHY_FREQ and %NL80211_ATTR_WIPHY_CHANNEL_TYPE attrs. + * %NL80211_ATTR_WIPHY_FREQ and the attributes determining channel width. * @NL80211_CMD_NEW_BEACON: old alias for %NL80211_CMD_START_AP * @NL80211_CMD_STOP_AP: Stop AP operation on the given interface * @NL80211_CMD_DEL_BEACON: old alias for %NL80211_CMD_STOP_AP @@ -373,8 +375,8 @@ * requests to connect to a specified network but without separating * auth and assoc steps. For this, you need to specify the SSID in a * %NL80211_ATTR_SSID attribute, and can optionally specify the association - * IEs in %NL80211_ATTR_IE, %NL80211_ATTR_AUTH_TYPE, %NL80211_ATTR_MAC, - * %NL80211_ATTR_WIPHY_FREQ, %NL80211_ATTR_CONTROL_PORT, + * IEs in %NL80211_ATTR_IE, %NL80211_ATTR_AUTH_TYPE, %NL80211_ATTR_USE_MFP, + * %NL80211_ATTR_MAC, %NL80211_ATTR_WIPHY_FREQ, %NL80211_ATTR_CONTROL_PORT, * %NL80211_ATTR_CONTROL_PORT_ETHERTYPE and * %NL80211_ATTR_CONTROL_PORT_NO_ENCRYPT. * Background scan period can optionally be @@ -401,8 +403,7 @@ * a response while being associated to an AP on another channel. * %NL80211_ATTR_IFINDEX is used to specify which interface (and thus * radio) is used. %NL80211_ATTR_WIPHY_FREQ is used to specify the - * frequency for the operation and %NL80211_ATTR_WIPHY_CHANNEL_TYPE may be - * optionally used to specify additional channel parameters. + * frequency for the operation. * %NL80211_ATTR_DURATION is used to specify the duration in milliseconds * to remain on the channel. This command is also used as an event to * notify when the requested duration starts (it may take a while for the @@ -440,12 +441,11 @@ * as an event indicating reception of a frame that was not processed in * kernel code, but is for us (i.e., which may need to be processed in a * user space application). %NL80211_ATTR_FRAME is used to specify the - * frame contents (including header). %NL80211_ATTR_WIPHY_FREQ (and - * optionally %NL80211_ATTR_WIPHY_CHANNEL_TYPE) is used to indicate on - * which channel the frame is to be transmitted or was received. If this - * channel is not the current channel (remain-on-channel or the - * operational channel) the device will switch to the given channel and - * transmit the frame, optionally waiting for a response for the time + * frame contents (including header). %NL80211_ATTR_WIPHY_FREQ is used + * to indicate on which channel the frame is to be transmitted or was + * received. If this channel is not the current channel (remain-on-channel + * or the operational channel) the device will switch to the given channel + * and transmit the frame, optionally waiting for a response for the time * specified using %NL80211_ATTR_DURATION. When called, this operation * returns a cookie (%NL80211_ATTR_COOKIE) that will be included with the * TX status event pertaining to the TX request. @@ -473,8 +473,8 @@ * command is used as an event to indicate the that a trigger level was * reached. * @NL80211_CMD_SET_CHANNEL: Set the channel (using %NL80211_ATTR_WIPHY_FREQ - * and %NL80211_ATTR_WIPHY_CHANNEL_TYPE) the given interface (identifed - * by %NL80211_ATTR_IFINDEX) shall operate on. + * and the attributes determining channel width) the given interface + * (identifed by %NL80211_ATTR_IFINDEX) shall operate on. * In case multiple channels are supported by the device, the mechanism * with which it switches channels is implementation-defined. * When a monitor interface is given, it can only switch channel while @@ -513,6 +513,12 @@ * command with the %NL80211_ATTR_WOWLAN_TRIGGERS attribute. For * more background information, see * http://wireless.kernel.org/en/users/Documentation/WoWLAN. + * The @NL80211_CMD_SET_WOWLAN command can also be used as a notification + * from the driver reporting the wakeup reason. In this case, the + * @NL80211_ATTR_WOWLAN_TRIGGERS attribute will contain the reason + * for the wakeup, if it was caused by wireless. If it is not present + * in the wakeup notification, the wireless device didn't cause the + * wakeup but reports that it was woken up. * * @NL80211_CMD_SET_REKEY_OFFLOAD: This command is used give the driver * the necessary information for supporting GTK rekey offload. This @@ -526,6 +532,12 @@ * of PMKSA caching dandidates. * * @NL80211_CMD_TDLS_OPER: Perform a high-level TDLS command (e.g. link setup). + * In addition, this can be used as an event to request userspace to take + * actions on TDLS links (set up a new link or tear down an existing one). + * In such events, %NL80211_ATTR_TDLS_OPERATION indicates the requested + * operation, %NL80211_ATTR_MAC contains the peer MAC address, and + * %NL80211_ATTR_REASON_CODE the reason code to be used (only with + * %NL80211_TDLS_TEARDOWN). * @NL80211_CMD_TDLS_MGMT: Send a TDLS management frame. * * @NL80211_CMD_UNEXPECTED_FRAME: Used by an application controlling an AP @@ -562,8 +574,8 @@ * * @NL80211_CMD_CH_SWITCH_NOTIFY: An AP or GO may decide to switch channels * independently of the userspace SME, send this event indicating - * %NL80211_ATTR_IFINDEX is now on %NL80211_ATTR_WIPHY_FREQ with - * %NL80211_ATTR_WIPHY_CHANNEL_TYPE. + * %NL80211_ATTR_IFINDEX is now on %NL80211_ATTR_WIPHY_FREQ and the + * attributes determining channel width. * * @NL80211_CMD_START_P2P_DEVICE: Start the given P2P Device, identified by * its %NL80211_ATTR_WDEV identifier. It must have been created with @@ -578,6 +590,27 @@ * station, due to particular reason. %NL80211_ATTR_CONN_FAILED_REASON * is used for this. * + * @NL80211_CMD_SET_MCAST_RATE: Change the rate used to send multicast frames + * for IBSS or MESH vif. + * + * @NL80211_CMD_SET_MAC_ACL: sets ACL for MAC address based access control. + * This is to be used with the drivers advertising the support of MAC + * address based access control. List of MAC addresses is passed in + * %NL80211_ATTR_MAC_ADDRS and ACL policy is passed in + * %NL80211_ATTR_ACL_POLICY. Driver will enable ACL with this list, if it + * is not already done. The new list will replace any existing list. Driver + * will clear its ACL when the list of MAC addresses passed is empty. This + * command is used in AP/P2P GO mode. Driver has to make sure to clear its + * ACL list during %NL80211_CMD_STOP_AP. + * + * @NL80211_CMD_RADAR_DETECT: Start a Channel availability check (CAC). Once + * a radar is detected or the channel availability scan (CAC) has finished + * or was aborted, or a radar was detected, usermode will be notified with + * this event. This command is also used to notify userspace about radars + * while operating on this channel. + * %NL80211_ATTR_RADAR_EVENT is used to inform about the type of the + * event. + * * @NL80211_CMD_MAX: highest used command number * @__NL80211_CMD_AFTER_LAST: internal use */ @@ -726,6 +759,12 @@ enum nl80211_commands { NL80211_CMD_CONN_FAILED, + NL80211_CMD_SET_MCAST_RATE, + + NL80211_CMD_SET_MAC_ACL, + + NL80211_CMD_RADAR_DETECT, + /* add new commands above here */ /* used to define NL80211_CMD_MAX below */ @@ -762,14 +801,26 @@ enum nl80211_commands { * /sys/class/ieee80211/<phyname>/index * @NL80211_ATTR_WIPHY_NAME: wiphy name (used for renaming) * @NL80211_ATTR_WIPHY_TXQ_PARAMS: a nested array of TX queue parameters - * @NL80211_ATTR_WIPHY_FREQ: frequency of the selected channel in MHz + * @NL80211_ATTR_WIPHY_FREQ: frequency of the selected channel in MHz, + * defines the channel together with the (deprecated) + * %NL80211_ATTR_WIPHY_CHANNEL_TYPE attribute or the attributes + * %NL80211_ATTR_CHANNEL_WIDTH and if needed %NL80211_ATTR_CENTER_FREQ1 + * and %NL80211_ATTR_CENTER_FREQ2 + * @NL80211_ATTR_CHANNEL_WIDTH: u32 attribute containing one of the values + * of &enum nl80211_chan_width, describing the channel width. See the + * documentation of the enum for more information. + * @NL80211_ATTR_CENTER_FREQ1: Center frequency of the first part of the + * channel, used for anything but 20 MHz bandwidth + * @NL80211_ATTR_CENTER_FREQ2: Center frequency of the second part of the + * channel, used only for 80+80 MHz bandwidth * @NL80211_ATTR_WIPHY_CHANNEL_TYPE: included with NL80211_ATTR_WIPHY_FREQ - * if HT20 or HT40 are allowed (i.e., 802.11n disabled if not included): + * if HT20 or HT40 are to be used (i.e., HT disabled if not included): * NL80211_CHAN_NO_HT = HT not allowed (i.e., same as not including * this attribute) * NL80211_CHAN_HT20 = HT20 only * NL80211_CHAN_HT40MINUS = secondary channel is below the primary channel * NL80211_CHAN_HT40PLUS = secondary channel is above the primary channel + * This attribute is now deprecated. * @NL80211_ATTR_WIPHY_RETRY_SHORT: TX retry limit for frames whose length is * less than or equal to the RTS threshold; allowed range: 1..255; * dot11ShortRetryLimit; u8 @@ -936,7 +987,7 @@ enum nl80211_commands { * @NL80211_ATTR_USE_MFP: Whether management frame protection (IEEE 802.11w) is * used for the association (&enum nl80211_mfp, represented as a u32); * this attribute can be used - * with %NL80211_CMD_ASSOCIATE request + * with %NL80211_CMD_ASSOCIATE and %NL80211_CMD_CONNECT requests * * @NL80211_ATTR_STA_FLAGS2: Attribute containing a * &struct nl80211_sta_flag_update. @@ -1273,6 +1324,50 @@ enum nl80211_commands { * the connection request from a station. nl80211_connect_failed_reason * enum has different reasons of connection failure. * + * @NL80211_ATTR_SAE_DATA: SAE elements in Authentication frames. This starts + * with the Authentication transaction sequence number field. + * + * @NL80211_ATTR_VHT_CAPABILITY: VHT Capability information element (from + * association request when used with NL80211_CMD_NEW_STATION) + * + * @NL80211_ATTR_SCAN_FLAGS: scan request control flags (u32) + * + * @NL80211_ATTR_P2P_CTWINDOW: P2P GO Client Traffic Window (u8), used with + * the START_AP and SET_BSS commands + * @NL80211_ATTR_P2P_OPPPS: P2P GO opportunistic PS (u8), used with the + * START_AP and SET_BSS commands. This can have the values 0 or 1; + * if not given in START_AP 0 is assumed, if not given in SET_BSS + * no change is made. + * + * @NL80211_ATTR_LOCAL_MESH_POWER_MODE: local mesh STA link-specific power mode + * defined in &enum nl80211_mesh_power_mode. + * + * @NL80211_ATTR_ACL_POLICY: ACL policy, see &enum nl80211_acl_policy, + * carried in a u32 attribute + * + * @NL80211_ATTR_MAC_ADDRS: Array of nested MAC addresses, used for + * MAC ACL. + * + * @NL80211_ATTR_MAC_ACL_MAX: u32 attribute to advertise the maximum + * number of MAC addresses that a device can support for MAC + * ACL. + * + * @NL80211_ATTR_RADAR_EVENT: Type of radar event for notification to userspace, + * contains a value of enum nl80211_radar_event (u32). + * + * @NL80211_ATTR_EXT_CAPA: 802.11 extended capabilities that the kernel driver + * has and handles. The format is the same as the IE contents. See + * 802.11-2012 8.4.2.29 for more information. + * @NL80211_ATTR_EXT_CAPA_MASK: Extended capabilities that the kernel driver + * has set in the %NL80211_ATTR_EXT_CAPA value, for multibit fields. + * + * @NL80211_ATTR_STA_CAPABILITY: Station capabilities (u16) are advertised to + * the driver, e.g., to enable TDLS power save (PU-APSD). + * + * @NL80211_ATTR_STA_EXT_CAPABILITY: Station extended capabilities are + * advertised to the driver, e.g., to enable TDLS off channel operations + * and PU-APSD. + * * @NL80211_ATTR_MAX: highest attribute number currently defined * @__NL80211_ATTR_AFTER_LAST: internal use */ @@ -1530,6 +1625,35 @@ enum nl80211_attrs { NL80211_ATTR_CONN_FAILED_REASON, + NL80211_ATTR_SAE_DATA, + + NL80211_ATTR_VHT_CAPABILITY, + + NL80211_ATTR_SCAN_FLAGS, + + NL80211_ATTR_CHANNEL_WIDTH, + NL80211_ATTR_CENTER_FREQ1, + NL80211_ATTR_CENTER_FREQ2, + + NL80211_ATTR_P2P_CTWINDOW, + NL80211_ATTR_P2P_OPPPS, + + NL80211_ATTR_LOCAL_MESH_POWER_MODE, + + NL80211_ATTR_ACL_POLICY, + + NL80211_ATTR_MAC_ADDRS, + + NL80211_ATTR_MAC_ACL_MAX, + + NL80211_ATTR_RADAR_EVENT, + + NL80211_ATTR_EXT_CAPA, + NL80211_ATTR_EXT_CAPA_MASK, + + NL80211_ATTR_STA_CAPABILITY, + NL80211_ATTR_STA_EXT_CAPABILITY, + /* add attributes here, update the policy in nl80211.c */ __NL80211_ATTR_AFTER_LAST, @@ -1573,6 +1697,7 @@ enum nl80211_attrs { #define NL80211_TKIP_DATA_OFFSET_TX_MIC_KEY 16 #define NL80211_TKIP_DATA_OFFSET_RX_MIC_KEY 24 #define NL80211_HT_CAPABILITY_LEN 26 +#define NL80211_VHT_CAPABILITY_LEN 12 #define NL80211_MAX_NR_CIPHER_SUITES 5 #define NL80211_MAX_NR_AKM_SUITES 2 @@ -1646,6 +1771,9 @@ enum nl80211_iftype { * flag can't be changed, it is only valid while adding a station, and * attempts to change it will silently be ignored (rather than rejected * as errors.) + * @NL80211_STA_FLAG_ASSOCIATED: station is associated; used with drivers + * that support %NL80211_FEATURE_FULL_AP_CLIENT_STATE to transition a + * previously added station into associated state * @NL80211_STA_FLAG_MAX: highest station flag number currently defined * @__NL80211_STA_FLAG_AFTER_LAST: internal use */ @@ -1657,6 +1785,7 @@ enum nl80211_sta_flags { NL80211_STA_FLAG_MFP, NL80211_STA_FLAG_AUTHENTICATED, NL80211_STA_FLAG_TDLS_PEER, + NL80211_STA_FLAG_ASSOCIATED, /* keep last */ __NL80211_STA_FLAG_AFTER_LAST, @@ -1693,10 +1822,15 @@ struct nl80211_sta_flag_update { * @__NL80211_RATE_INFO_INVALID: attribute number 0 is reserved * @NL80211_RATE_INFO_BITRATE: total bitrate (u16, 100kbit/s) * @NL80211_RATE_INFO_MCS: mcs index for 802.11n (u8) - * @NL80211_RATE_INFO_40_MHZ_WIDTH: 40 Mhz dualchannel bitrate + * @NL80211_RATE_INFO_40_MHZ_WIDTH: 40 MHz dualchannel bitrate * @NL80211_RATE_INFO_SHORT_GI: 400ns guard interval * @NL80211_RATE_INFO_BITRATE32: total bitrate (u32, 100kbit/s) * @NL80211_RATE_INFO_MAX: highest rate_info number currently defined + * @NL80211_RATE_INFO_VHT_MCS: MCS index for VHT (u8) + * @NL80211_RATE_INFO_VHT_NSS: number of streams in VHT (u8) + * @NL80211_RATE_INFO_80_MHZ_WIDTH: 80 MHz VHT rate + * @NL80211_RATE_INFO_80P80_MHZ_WIDTH: 80+80 MHz VHT rate + * @NL80211_RATE_INFO_160_MHZ_WIDTH: 160 MHz VHT rate * @__NL80211_RATE_INFO_AFTER_LAST: internal use */ enum nl80211_rate_info { @@ -1706,6 +1840,11 @@ enum nl80211_rate_info { NL80211_RATE_INFO_40_MHZ_WIDTH, NL80211_RATE_INFO_SHORT_GI, NL80211_RATE_INFO_BITRATE32, + NL80211_RATE_INFO_VHT_MCS, + NL80211_RATE_INFO_VHT_NSS, + NL80211_RATE_INFO_80_MHZ_WIDTH, + NL80211_RATE_INFO_80P80_MHZ_WIDTH, + NL80211_RATE_INFO_160_MHZ_WIDTH, /* keep last */ __NL80211_RATE_INFO_AFTER_LAST, @@ -1752,6 +1891,8 @@ enum nl80211_sta_bss_param { * @NL80211_STA_INFO_INACTIVE_TIME: time since last activity (u32, msecs) * @NL80211_STA_INFO_RX_BYTES: total received bytes (u32, from this station) * @NL80211_STA_INFO_TX_BYTES: total transmitted bytes (u32, to this station) + * @NL80211_STA_INFO_RX_BYTES64: total received bytes (u64, from this station) + * @NL80211_STA_INFO_TX_BYTES64: total transmitted bytes (u64, to this station) * @NL80211_STA_INFO_SIGNAL: signal strength of last received PPDU (u8, dBm) * @NL80211_STA_INFO_TX_BITRATE: current unicast tx rate, nested attribute * containing info as possible, see &enum nl80211_rate_info @@ -1773,6 +1914,10 @@ enum nl80211_sta_bss_param { * @NL80211_STA_INFO_STA_FLAGS: Contains a struct nl80211_sta_flag_update. * @NL80211_STA_INFO_BEACON_LOSS: count of times beacon loss was detected (u32) * @NL80211_STA_INFO_T_OFFSET: timing offset with respect to this STA (s64) + * @NL80211_STA_INFO_LOCAL_PM: local mesh STA link-specific power mode + * @NL80211_STA_INFO_PEER_PM: peer mesh STA link-specific power mode + * @NL80211_STA_INFO_NONPEER_PM: neighbor mesh STA power save mode towards + * non-peer STA * @__NL80211_STA_INFO_AFTER_LAST: internal * @NL80211_STA_INFO_MAX: highest possible station info attribute */ @@ -1797,6 +1942,11 @@ enum nl80211_sta_info { NL80211_STA_INFO_STA_FLAGS, NL80211_STA_INFO_BEACON_LOSS, NL80211_STA_INFO_T_OFFSET, + NL80211_STA_INFO_LOCAL_PM, + NL80211_STA_INFO_PEER_PM, + NL80211_STA_INFO_NONPEER_PM, + NL80211_STA_INFO_RX_BYTES64, + NL80211_STA_INFO_TX_BYTES64, /* keep last */ __NL80211_STA_INFO_AFTER_LAST, @@ -1906,6 +2056,20 @@ enum nl80211_band_attr { * on this channel in current regulatory domain. * @NL80211_FREQUENCY_ATTR_MAX_TX_POWER: Maximum transmission power in mBm * (100 * dBm). + * @NL80211_FREQUENCY_ATTR_DFS_STATE: current state for DFS + * (enum nl80211_dfs_state) + * @NL80211_FREQUENCY_ATTR_DFS_TIME: time in miliseconds for how long + * this channel is in this DFS state. + * @NL80211_FREQUENCY_ATTR_NO_HT40_MINUS: HT40- isn't possible with this + * channel as the control channel + * @NL80211_FREQUENCY_ATTR_NO_HT40_PLUS: HT40+ isn't possible with this + * channel as the control channel + * @NL80211_FREQUENCY_ATTR_NO_80MHZ: any 80 MHz channel using this channel + * as the primary or any of the secondary channels isn't possible, + * this includes 80+80 channels + * @NL80211_FREQUENCY_ATTR_NO_160MHZ: any 160 MHz (but not 80+80) channel + * using this channel as the primary or any of the secondary channels + * isn't possible * @NL80211_FREQUENCY_ATTR_MAX: highest frequency attribute number * currently defined * @__NL80211_FREQUENCY_ATTR_AFTER_LAST: internal use @@ -1918,6 +2082,12 @@ enum nl80211_frequency_attr { NL80211_FREQUENCY_ATTR_NO_IBSS, NL80211_FREQUENCY_ATTR_RADAR, NL80211_FREQUENCY_ATTR_MAX_TX_POWER, + NL80211_FREQUENCY_ATTR_DFS_STATE, + NL80211_FREQUENCY_ATTR_DFS_TIME, + NL80211_FREQUENCY_ATTR_NO_HT40_MINUS, + NL80211_FREQUENCY_ATTR_NO_HT40_PLUS, + NL80211_FREQUENCY_ATTR_NO_80MHZ, + NL80211_FREQUENCY_ATTR_NO_160MHZ, /* keep last */ __NL80211_FREQUENCY_ATTR_AFTER_LAST, @@ -2188,6 +2358,34 @@ enum nl80211_mntr_flags { }; /** + * enum nl80211_mesh_power_mode - mesh power save modes + * + * @NL80211_MESH_POWER_UNKNOWN: The mesh power mode of the mesh STA is + * not known or has not been set yet. + * @NL80211_MESH_POWER_ACTIVE: Active mesh power mode. The mesh STA is + * in Awake state all the time. + * @NL80211_MESH_POWER_LIGHT_SLEEP: Light sleep mode. The mesh STA will + * alternate between Active and Doze states, but will wake up for + * neighbor's beacons. + * @NL80211_MESH_POWER_DEEP_SLEEP: Deep sleep mode. The mesh STA will + * alternate between Active and Doze states, but may not wake up + * for neighbor's beacons. + * + * @__NL80211_MESH_POWER_AFTER_LAST - internal use + * @NL80211_MESH_POWER_MAX - highest possible power save level + */ + +enum nl80211_mesh_power_mode { + NL80211_MESH_POWER_UNKNOWN, + NL80211_MESH_POWER_ACTIVE, + NL80211_MESH_POWER_LIGHT_SLEEP, + NL80211_MESH_POWER_DEEP_SLEEP, + + __NL80211_MESH_POWER_AFTER_LAST, + NL80211_MESH_POWER_MAX = __NL80211_MESH_POWER_AFTER_LAST - 1 +}; + +/** * enum nl80211_meshconf_params - mesh configuration parameters * * Mesh configuration parameters. These can be changed while the mesh is @@ -2281,6 +2479,11 @@ enum nl80211_mntr_flags { * (in TUs) during which a mesh STA can send only one Action frame * containing a PREQ element for root path confirmation. * + * @NL80211_MESHCONF_POWER_MODE: Default mesh power mode for new peer links. + * type &enum nl80211_mesh_power_mode (u32) + * + * @NL80211_MESHCONF_AWAKE_WINDOW: awake window duration (in TUs) + * * @__NL80211_MESHCONF_ATTR_AFTER_LAST: internal use */ enum nl80211_meshconf_params { @@ -2310,6 +2513,8 @@ enum nl80211_meshconf_params { NL80211_MESHCONF_HWMP_PATH_TO_ROOT_TIMEOUT, NL80211_MESHCONF_HWMP_ROOT_INTERVAL, NL80211_MESHCONF_HWMP_CONFIRMATION_INTERVAL, + NL80211_MESHCONF_POWER_MODE, + NL80211_MESHCONF_AWAKE_WINDOW, /* keep last */ __NL80211_MESHCONF_ATTR_AFTER_LAST, @@ -2414,6 +2619,15 @@ enum nl80211_ac { #define NL80211_TXQ_Q_BE NL80211_AC_BE #define NL80211_TXQ_Q_BK NL80211_AC_BK +/** + * enum nl80211_channel_type - channel type + * @NL80211_CHAN_NO_HT: 20 MHz, non-HT channel + * @NL80211_CHAN_HT20: 20 MHz HT channel + * @NL80211_CHAN_HT40MINUS: HT40 channel, secondary channel + * below the control channel + * @NL80211_CHAN_HT40PLUS: HT40 channel, secondary channel + * above the control channel + */ enum nl80211_channel_type { NL80211_CHAN_NO_HT, NL80211_CHAN_HT20, @@ -2422,6 +2636,32 @@ enum nl80211_channel_type { }; /** + * enum nl80211_chan_width - channel width definitions + * + * These values are used with the %NL80211_ATTR_CHANNEL_WIDTH + * attribute. + * + * @NL80211_CHAN_WIDTH_20_NOHT: 20 MHz, non-HT channel + * @NL80211_CHAN_WIDTH_20: 20 MHz HT channel + * @NL80211_CHAN_WIDTH_40: 40 MHz channel, the %NL80211_ATTR_CENTER_FREQ1 + * attribute must be provided as well + * @NL80211_CHAN_WIDTH_80: 80 MHz channel, the %NL80211_ATTR_CENTER_FREQ1 + * attribute must be provided as well + * @NL80211_CHAN_WIDTH_80P80: 80+80 MHz channel, the %NL80211_ATTR_CENTER_FREQ1 + * and %NL80211_ATTR_CENTER_FREQ2 attributes must be provided as well + * @NL80211_CHAN_WIDTH_160: 160 MHz channel, the %NL80211_ATTR_CENTER_FREQ1 + * attribute must be provided as well + */ +enum nl80211_chan_width { + NL80211_CHAN_WIDTH_20_NOHT, + NL80211_CHAN_WIDTH_20, + NL80211_CHAN_WIDTH_40, + NL80211_CHAN_WIDTH_80, + NL80211_CHAN_WIDTH_80P80, + NL80211_CHAN_WIDTH_160, +}; + +/** * enum nl80211_bss - netlink attributes for a BSS * * @__NL80211_BSS_INVALID: invalid @@ -2489,6 +2729,7 @@ enum nl80211_bss_status { * @NL80211_AUTHTYPE_SHARED_KEY: Shared Key authentication (WEP only) * @NL80211_AUTHTYPE_FT: Fast BSS Transition (IEEE 802.11r) * @NL80211_AUTHTYPE_NETWORK_EAP: Network EAP (some Cisco APs and mainly LEAP) + * @NL80211_AUTHTYPE_SAE: Simultaneous authentication of equals * @__NL80211_AUTHTYPE_NUM: internal * @NL80211_AUTHTYPE_MAX: maximum valid auth algorithm * @NL80211_AUTHTYPE_AUTOMATIC: determine automatically (if necessary by @@ -2500,6 +2741,7 @@ enum nl80211_auth_type { NL80211_AUTHTYPE_SHARED_KEY, NL80211_AUTHTYPE_FT, NL80211_AUTHTYPE_NETWORK_EAP, + NL80211_AUTHTYPE_SAE, /* keep last */ __NL80211_AUTHTYPE_NUM, @@ -2718,10 +2960,12 @@ enum nl80211_tx_power_setting { * corresponds to the lowest-order bit in the second byte of the mask. * For example: The match 00:xx:00:00:xx:00:00:00:00:xx:xx:xx (where * xx indicates "don't care") would be represented by a pattern of - * twelve zero bytes, and a mask of "0xed,0x07". + * twelve zero bytes, and a mask of "0xed,0x01". * Note that the pattern matching is done as though frames were not * 802.11 frames but 802.3 frames, i.e. the frame is fully unpacked * first (including SNAP header unpacking) and then matched. + * @NL80211_WOWLAN_PKTPAT_OFFSET: packet offset, pattern is matched after + * these fixed number of bytes of received packet * @NUM_NL80211_WOWLAN_PKTPAT: number of attributes * @MAX_NL80211_WOWLAN_PKTPAT: max attribute number */ @@ -2729,6 +2973,7 @@ enum nl80211_wowlan_packet_pattern_attr { __NL80211_WOWLAN_PKTPAT_INVALID, NL80211_WOWLAN_PKTPAT_MASK, NL80211_WOWLAN_PKTPAT_PATTERN, + NL80211_WOWLAN_PKTPAT_OFFSET, NUM_NL80211_WOWLAN_PKTPAT, MAX_NL80211_WOWLAN_PKTPAT = NUM_NL80211_WOWLAN_PKTPAT - 1, @@ -2739,6 +2984,7 @@ enum nl80211_wowlan_packet_pattern_attr { * @max_patterns: maximum number of patterns supported * @min_pattern_len: minimum length of each pattern * @max_pattern_len: maximum length of each pattern + * @max_pkt_offset: maximum Rx packet offset * * This struct is carried in %NL80211_WOWLAN_TRIG_PKT_PATTERN when * that is part of %NL80211_ATTR_WOWLAN_TRIGGERS_SUPPORTED in the @@ -2748,6 +2994,7 @@ struct nl80211_wowlan_pattern_support { __u32 max_patterns; __u32 min_pattern_len; __u32 max_pattern_len; + __u32 max_pkt_offset; } __attribute__((packed)); /** @@ -2763,12 +3010,17 @@ struct nl80211_wowlan_pattern_support { * @NL80211_WOWLAN_TRIG_PKT_PATTERN: wake up on the specified packet patterns * which are passed in an array of nested attributes, each nested attribute * defining a with attributes from &struct nl80211_wowlan_trig_pkt_pattern. - * Each pattern defines a wakeup packet. The matching is done on the MSDU, - * i.e. as though the packet was an 802.3 packet, so the pattern matching - * is done after the packet is converted to the MSDU. + * Each pattern defines a wakeup packet. Packet offset is associated with + * each pattern which is used while matching the pattern. The matching is + * done on the MSDU, i.e. as though the packet was an 802.3 packet, so the + * pattern matching is done after the packet is converted to the MSDU. * * In %NL80211_ATTR_WOWLAN_TRIGGERS_SUPPORTED, it is a binary attribute * carrying a &struct nl80211_wowlan_pattern_support. + * + * When reporting wakeup. it is a u32 attribute containing the 0-based + * index of the pattern that caused the wakeup, in the patterns passed + * to the kernel when configuring. * @NL80211_WOWLAN_TRIG_GTK_REKEY_SUPPORTED: Not a real trigger, and cannot be * used when setting, used only to indicate that GTK rekeying is supported * by the device (flag) @@ -2779,8 +3031,36 @@ struct nl80211_wowlan_pattern_support { * @NL80211_WOWLAN_TRIG_4WAY_HANDSHAKE: wake up on 4-way handshake (flag) * @NL80211_WOWLAN_TRIG_RFKILL_RELEASE: wake up when rfkill is released * (on devices that have rfkill in the device) (flag) + * @NL80211_WOWLAN_TRIG_WAKEUP_PKT_80211: For wakeup reporting only, contains + * the 802.11 packet that caused the wakeup, e.g. a deauth frame. The frame + * may be truncated, the @NL80211_WOWLAN_TRIG_WAKEUP_PKT_80211_LEN + * attribute contains the original length. + * @NL80211_WOWLAN_TRIG_WAKEUP_PKT_80211_LEN: Original length of the 802.11 + * packet, may be bigger than the @NL80211_WOWLAN_TRIG_WAKEUP_PKT_80211 + * attribute if the packet was truncated somewhere. + * @NL80211_WOWLAN_TRIG_WAKEUP_PKT_8023: For wakeup reporting only, contains the + * 802.11 packet that caused the wakeup, e.g. a magic packet. The frame may + * be truncated, the @NL80211_WOWLAN_TRIG_WAKEUP_PKT_8023_LEN attribute + * contains the original length. + * @NL80211_WOWLAN_TRIG_WAKEUP_PKT_8023_LEN: Original length of the 802.3 + * packet, may be bigger than the @NL80211_WOWLAN_TRIG_WAKEUP_PKT_8023 + * attribute if the packet was truncated somewhere. + * @NL80211_WOWLAN_TRIG_TCP_CONNECTION: TCP connection wake, see DOC section + * "TCP connection wakeup" for more details. This is a nested attribute + * containing the exact information for establishing and keeping alive + * the TCP connection. + * @NL80211_WOWLAN_TRIG_TCP_WAKEUP_MATCH: For wakeup reporting only, the + * wakeup packet was received on the TCP connection + * @NL80211_WOWLAN_TRIG_WAKEUP_TCP_CONNLOST: For wakeup reporting only, the + * TCP connection was lost or failed to be established + * @NL80211_WOWLAN_TRIG_WAKEUP_TCP_NOMORETOKENS: For wakeup reporting only, + * the TCP connection ran out of tokens to use for data to send to the + * service * @NUM_NL80211_WOWLAN_TRIG: number of wake on wireless triggers * @MAX_NL80211_WOWLAN_TRIG: highest wowlan trigger attribute number + * + * These nested attributes are used to configure the wakeup triggers and + * to report the wakeup reason(s). */ enum nl80211_wowlan_triggers { __NL80211_WOWLAN_TRIG_INVALID, @@ -2793,6 +3073,14 @@ enum nl80211_wowlan_triggers { NL80211_WOWLAN_TRIG_EAP_IDENT_REQUEST, NL80211_WOWLAN_TRIG_4WAY_HANDSHAKE, NL80211_WOWLAN_TRIG_RFKILL_RELEASE, + NL80211_WOWLAN_TRIG_WAKEUP_PKT_80211, + NL80211_WOWLAN_TRIG_WAKEUP_PKT_80211_LEN, + NL80211_WOWLAN_TRIG_WAKEUP_PKT_8023, + NL80211_WOWLAN_TRIG_WAKEUP_PKT_8023_LEN, + NL80211_WOWLAN_TRIG_TCP_CONNECTION, + NL80211_WOWLAN_TRIG_WAKEUP_TCP_MATCH, + NL80211_WOWLAN_TRIG_WAKEUP_TCP_CONNLOST, + NL80211_WOWLAN_TRIG_WAKEUP_TCP_NOMORETOKENS, /* keep last */ NUM_NL80211_WOWLAN_TRIG, @@ -2800,6 +3088,116 @@ enum nl80211_wowlan_triggers { }; /** + * DOC: TCP connection wakeup + * + * Some devices can establish a TCP connection in order to be woken up by a + * packet coming in from outside their network segment, or behind NAT. If + * configured, the device will establish a TCP connection to the given + * service, and periodically send data to that service. The first data + * packet is usually transmitted after SYN/ACK, also ACKing the SYN/ACK. + * The data packets can optionally include a (little endian) sequence + * number (in the TCP payload!) that is generated by the device, and, also + * optionally, a token from a list of tokens. This serves as a keep-alive + * with the service, and for NATed connections, etc. + * + * During this keep-alive period, the server doesn't send any data to the + * client. When receiving data, it is compared against the wakeup pattern + * (and mask) and if it matches, the host is woken up. Similarly, if the + * connection breaks or cannot be established to start with, the host is + * also woken up. + * + * Developer's note: ARP offload is required for this, otherwise TCP + * response packets might not go through correctly. + */ + +/** + * struct nl80211_wowlan_tcp_data_seq - WoWLAN TCP data sequence + * @start: starting value + * @offset: offset of sequence number in packet + * @len: length of the sequence value to write, 1 through 4 + * + * Note: don't confuse with the TCP sequence number(s), this is for the + * keepalive packet payload. The actual value is written into the packet + * in little endian. + */ +struct nl80211_wowlan_tcp_data_seq { + __u32 start, offset, len; +}; + +/** + * struct nl80211_wowlan_tcp_data_token - WoWLAN TCP data token config + * @offset: offset of token in packet + * @len: length of each token + * @token_stream: stream of data to be used for the tokens, the length must + * be a multiple of @len for this to make sense + */ +struct nl80211_wowlan_tcp_data_token { + __u32 offset, len; + __u8 token_stream[]; +}; + +/** + * struct nl80211_wowlan_tcp_data_token_feature - data token features + * @min_len: minimum token length + * @max_len: maximum token length + * @bufsize: total available token buffer size (max size of @token_stream) + */ +struct nl80211_wowlan_tcp_data_token_feature { + __u32 min_len, max_len, bufsize; +}; + +/** + * enum nl80211_wowlan_tcp_attrs - WoWLAN TCP connection parameters + * @__NL80211_WOWLAN_TCP_INVALID: invalid number for nested attributes + * @NL80211_WOWLAN_TCP_SRC_IPV4: source IPv4 address (in network byte order) + * @NL80211_WOWLAN_TCP_DST_IPV4: destination IPv4 address + * (in network byte order) + * @NL80211_WOWLAN_TCP_DST_MAC: destination MAC address, this is given because + * route lookup when configured might be invalid by the time we suspend, + * and doing a route lookup when suspending is no longer possible as it + * might require ARP querying. + * @NL80211_WOWLAN_TCP_SRC_PORT: source port (u16); optional, if not given a + * socket and port will be allocated + * @NL80211_WOWLAN_TCP_DST_PORT: destination port (u16) + * @NL80211_WOWLAN_TCP_DATA_PAYLOAD: data packet payload, at least one byte. + * For feature advertising, a u32 attribute holding the maximum length + * of the data payload. + * @NL80211_WOWLAN_TCP_DATA_PAYLOAD_SEQ: data packet sequence configuration + * (if desired), a &struct nl80211_wowlan_tcp_data_seq. For feature + * advertising it is just a flag + * @NL80211_WOWLAN_TCP_DATA_PAYLOAD_TOKEN: data packet token configuration, + * see &struct nl80211_wowlan_tcp_data_token and for advertising see + * &struct nl80211_wowlan_tcp_data_token_feature. + * @NL80211_WOWLAN_TCP_DATA_INTERVAL: data interval in seconds, maximum + * interval in feature advertising (u32) + * @NL80211_WOWLAN_TCP_WAKE_PAYLOAD: wake packet payload, for advertising a + * u32 attribute holding the maximum length + * @NL80211_WOWLAN_TCP_WAKE_MASK: Wake packet payload mask, not used for + * feature advertising. The mask works like @NL80211_WOWLAN_PKTPAT_MASK + * but on the TCP payload only. + * @NUM_NL80211_WOWLAN_TCP: number of TCP attributes + * @MAX_NL80211_WOWLAN_TCP: highest attribute number + */ +enum nl80211_wowlan_tcp_attrs { + __NL80211_WOWLAN_TCP_INVALID, + NL80211_WOWLAN_TCP_SRC_IPV4, + NL80211_WOWLAN_TCP_DST_IPV4, + NL80211_WOWLAN_TCP_DST_MAC, + NL80211_WOWLAN_TCP_SRC_PORT, + NL80211_WOWLAN_TCP_DST_PORT, + NL80211_WOWLAN_TCP_DATA_PAYLOAD, + NL80211_WOWLAN_TCP_DATA_PAYLOAD_SEQ, + NL80211_WOWLAN_TCP_DATA_PAYLOAD_TOKEN, + NL80211_WOWLAN_TCP_DATA_INTERVAL, + NL80211_WOWLAN_TCP_WAKE_PAYLOAD, + NL80211_WOWLAN_TCP_WAKE_MASK, + + /* keep last */ + NUM_NL80211_WOWLAN_TCP, + MAX_NL80211_WOWLAN_TCP = NUM_NL80211_WOWLAN_TCP - 1 +}; + +/** * enum nl80211_iface_limit_attrs - limit attributes * @NL80211_IFACE_LIMIT_UNSPEC: (reserved) * @NL80211_IFACE_LIMIT_MAX: maximum number of interfaces that @@ -2835,6 +3233,8 @@ enum nl80211_iface_limit_attrs { * the infrastructure network's beacon interval. * @NL80211_IFACE_COMB_NUM_CHANNELS: u32 attribute specifying how many * different channels may be used within this group. + * @NL80211_IFACE_COMB_RADAR_DETECT_WIDTHS: u32 attribute containing the bitmap + * of supported channel widths for radar detection. * @NUM_NL80211_IFACE_COMB: number of attributes * @MAX_NL80211_IFACE_COMB: highest attribute number * @@ -2867,6 +3267,7 @@ enum nl80211_if_combination_attrs { NL80211_IFACE_COMB_MAXNUM, NL80211_IFACE_COMB_STA_AP_BI_MATCH, NL80211_IFACE_COMB_NUM_CHANNELS, + NL80211_IFACE_COMB_RADAR_DETECT_WIDTHS, /* keep last */ NUM_NL80211_IFACE_COMB, @@ -3028,6 +3429,33 @@ enum nl80211_ap_sme_features { * in the interface combinations, even when it's only used for scan * and remain-on-channel. This could be due to, for example, the * remain-on-channel implementation requiring a channel context. + * @NL80211_FEATURE_SAE: This driver supports simultaneous authentication of + * equals (SAE) with user space SME (NL80211_CMD_AUTHENTICATE) in station + * mode + * @NL80211_FEATURE_LOW_PRIORITY_SCAN: This driver supports low priority scan + * @NL80211_FEATURE_SCAN_FLUSH: Scan flush is supported + * @NL80211_FEATURE_AP_SCAN: Support scanning using an AP vif + * @NL80211_FEATURE_VIF_TXPOWER: The driver supports per-vif TX power setting + * @NL80211_FEATURE_NEED_OBSS_SCAN: The driver expects userspace to perform + * OBSS scans and generate 20/40 BSS coex reports. This flag is used only + * for drivers implementing the CONNECT API, for AUTH/ASSOC it is implied. + * @NL80211_FEATURE_P2P_GO_CTWIN: P2P GO implementation supports CT Window + * setting + * @NL80211_FEATURE_P2P_GO_OPPPS: P2P GO implementation supports opportunistic + * powersave + * @NL80211_FEATURE_FULL_AP_CLIENT_STATE: The driver supports full state + * transitions for AP clients. Without this flag (and if the driver + * doesn't have the AP SME in the device) the driver supports adding + * stations only when they're associated and adds them in associated + * state (to later be transitioned into authorized), with this flag + * they should be added before even sending the authentication reply + * and then transitioned into authenticated, associated and authorized + * states using station flags. + * Note that even for drivers that support this, the default is to add + * stations in authenticated/associated state, so to add unauthenticated + * stations the authenticated/associated bits have to be set in the mask. + * @NL80211_FEATURE_ADVERTISE_CHAN_LIMITS: cfg80211 advertises channel limits + * (HT40, VHT 80/160 MHz) if this flag is set */ enum nl80211_feature_flags { NL80211_FEATURE_SK_TX_STATUS = 1 << 0, @@ -3035,6 +3463,17 @@ enum nl80211_feature_flags { NL80211_FEATURE_INACTIVITY_TIMER = 1 << 2, NL80211_FEATURE_CELL_BASE_REG_HINTS = 1 << 3, NL80211_FEATURE_P2P_DEVICE_NEEDS_CHANNEL = 1 << 4, + NL80211_FEATURE_SAE = 1 << 5, + NL80211_FEATURE_LOW_PRIORITY_SCAN = 1 << 6, + NL80211_FEATURE_SCAN_FLUSH = 1 << 7, + NL80211_FEATURE_AP_SCAN = 1 << 8, + NL80211_FEATURE_VIF_TXPOWER = 1 << 9, + NL80211_FEATURE_NEED_OBSS_SCAN = 1 << 10, + NL80211_FEATURE_P2P_GO_CTWIN = 1 << 11, + NL80211_FEATURE_P2P_GO_OPPPS = 1 << 12, + /* bit 13 is reserved */ + NL80211_FEATURE_ADVERTISE_CHAN_LIMITS = 1 << 14, + NL80211_FEATURE_FULL_AP_CLIENT_STATE = 1 << 15, }; /** @@ -3062,11 +3501,90 @@ enum nl80211_probe_resp_offload_support_attr { * enum nl80211_connect_failed_reason - connection request failed reasons * @NL80211_CONN_FAIL_MAX_CLIENTS: Maximum number of clients that can be * handled by the AP is reached. - * @NL80211_CONN_FAIL_BLOCKED_CLIENT: Client's MAC is in the AP's blocklist. + * @NL80211_CONN_FAIL_BLOCKED_CLIENT: Connection request is rejected due to ACL. */ enum nl80211_connect_failed_reason { NL80211_CONN_FAIL_MAX_CLIENTS, NL80211_CONN_FAIL_BLOCKED_CLIENT, }; +/** + * enum nl80211_scan_flags - scan request control flags + * + * Scan request control flags are used to control the handling + * of NL80211_CMD_TRIGGER_SCAN and NL80211_CMD_START_SCHED_SCAN + * requests. + * + * @NL80211_SCAN_FLAG_LOW_PRIORITY: scan request has low priority + * @NL80211_SCAN_FLAG_FLUSH: flush cache before scanning + * @NL80211_SCAN_FLAG_AP: force a scan even if the interface is configured + * as AP and the beaconing has already been configured. This attribute is + * dangerous because will destroy stations performance as a lot of frames + * will be lost while scanning off-channel, therefore it must be used only + * when really needed + */ +enum nl80211_scan_flags { + NL80211_SCAN_FLAG_LOW_PRIORITY = 1<<0, + NL80211_SCAN_FLAG_FLUSH = 1<<1, + NL80211_SCAN_FLAG_AP = 1<<2, +}; + +/** + * enum nl80211_acl_policy - access control policy + * + * Access control policy is applied on a MAC list set by + * %NL80211_CMD_START_AP and %NL80211_CMD_SET_MAC_ACL, to + * be used with %NL80211_ATTR_ACL_POLICY. + * + * @NL80211_ACL_POLICY_ACCEPT_UNLESS_LISTED: Deny stations which are + * listed in ACL, i.e. allow all the stations which are not listed + * in ACL to authenticate. + * @NL80211_ACL_POLICY_DENY_UNLESS_LISTED: Allow the stations which are listed + * in ACL, i.e. deny all the stations which are not listed in ACL. + */ +enum nl80211_acl_policy { + NL80211_ACL_POLICY_ACCEPT_UNLESS_LISTED, + NL80211_ACL_POLICY_DENY_UNLESS_LISTED, +}; + +/** + * enum nl80211_radar_event - type of radar event for DFS operation + * + * Type of event to be used with NL80211_ATTR_RADAR_EVENT to inform userspace + * about detected radars or success of the channel available check (CAC) + * + * @NL80211_RADAR_DETECTED: A radar pattern has been detected. The channel is + * now unusable. + * @NL80211_RADAR_CAC_FINISHED: Channel Availability Check has been finished, + * the channel is now available. + * @NL80211_RADAR_CAC_ABORTED: Channel Availability Check has been aborted, no + * change to the channel status. + * @NL80211_RADAR_NOP_FINISHED: The Non-Occupancy Period for this channel is + * over, channel becomes usable. + */ +enum nl80211_radar_event { + NL80211_RADAR_DETECTED, + NL80211_RADAR_CAC_FINISHED, + NL80211_RADAR_CAC_ABORTED, + NL80211_RADAR_NOP_FINISHED, +}; + +/** + * enum nl80211_dfs_state - DFS states for channels + * + * Channel states used by the DFS code. + * + * @IEEE80211_DFS_USABLE: The channel can be used, but channel availability + * check (CAC) must be performed before using it for AP or IBSS. + * @IEEE80211_DFS_UNAVAILABLE: A radar has been detected on this channel, it + * is therefore marked as not available. + * @IEEE80211_DFS_AVAILABLE: The channel has been CAC checked and is available. + */ + +enum nl80211_dfs_state { + NL80211_DFS_USABLE, + NL80211_DFS_UNAVAILABLE, + NL80211_DFS_AVAILABLE, +}; + #endif /* __LINUX_NL80211_H */ diff --git a/include/uapi/linux/oom.h b/include/uapi/linux/oom.h index a49c4afc7060..b29272d621ce 100644 --- a/include/uapi/linux/oom.h +++ b/include/uapi/linux/oom.h @@ -8,4 +8,13 @@ #define OOM_SCORE_ADJ_MIN (-1000) #define OOM_SCORE_ADJ_MAX 1000 +/* + * /proc/<pid>/oom_adj set to -17 protects from the oom killer for legacy + * purposes. + */ +#define OOM_DISABLE (-17) +/* inclusive */ +#define OOM_ADJUST_MIN (-16) +#define OOM_ADJUST_MAX 15 + #endif /* _UAPI__INCLUDE_LINUX_OOM_H */ diff --git a/include/uapi/linux/pci_regs.h b/include/uapi/linux/pci_regs.h index 20ae747ddf34..ebfadc56d1b4 100644 --- a/include/uapi/linux/pci_regs.h +++ b/include/uapi/linux/pci_regs.h @@ -349,7 +349,7 @@ #define PCI_AF_STATUS_TP 0x01 #define PCI_CAP_AF_SIZEOF 6 /* size of AF registers */ -/* PCI-X registers */ +/* PCI-X registers (Type 0 (non-bridge) devices) */ #define PCI_X_CMD 2 /* Modes & Features */ #define PCI_X_CMD_DPERR_E 0x0001 /* Data Parity Error Recovery Enable */ @@ -389,6 +389,19 @@ #define PCI_CAP_PCIX_SIZEOF_V1 24 /* size for Version 1 */ #define PCI_CAP_PCIX_SIZEOF_V2 PCI_CAP_PCIX_SIZEOF_V1 /* Same for v2 */ +/* PCI-X registers (Type 1 (bridge) devices) */ + +#define PCI_X_BRIDGE_SSTATUS 2 /* Secondary Status */ +#define PCI_X_SSTATUS_64BIT 0x0001 /* Secondary AD interface is 64 bits */ +#define PCI_X_SSTATUS_133MHZ 0x0002 /* 133 MHz capable */ +#define PCI_X_SSTATUS_FREQ 0x03c0 /* Secondary Bus Mode and Frequency */ +#define PCI_X_SSTATUS_VERS 0x3000 /* PCI-X Capability Version */ +#define PCI_X_SSTATUS_V1 0x1000 /* Mode 2, not Mode 1 */ +#define PCI_X_SSTATUS_V2 0x2000 /* Mode 1 or Modes 1 and 2 */ +#define PCI_X_SSTATUS_266MHZ 0x4000 /* 266 MHz capable */ +#define PCI_X_SSTATUS_533MHZ 0x8000 /* 533 MHz capable */ +#define PCI_X_BRIDGE_STATUS 4 /* Bridge Status */ + /* PCI Bridge Subsystem ID registers */ #define PCI_SSVID_VENDOR_ID 4 /* PCI-Bridge subsystem vendor id register */ @@ -445,6 +458,8 @@ #define PCI_EXP_DEVSTA_TRPND 0x20 /* Transactions Pending */ #define PCI_EXP_LNKCAP 12 /* Link Capabilities */ #define PCI_EXP_LNKCAP_SLS 0x0000000f /* Supported Link Speeds */ +#define PCI_EXP_LNKCAP_SLS_2_5GB 0x1 /* LNKCAP2 SLS Vector bit 0 (2.5GT/s) */ +#define PCI_EXP_LNKCAP_SLS_5_0GB 0x2 /* LNKCAP2 SLS Vector bit 1 (5.0GT/s) */ #define PCI_EXP_LNKCAP_MLW 0x000003f0 /* Maximum Link Width */ #define PCI_EXP_LNKCAP_ASPMS 0x00000c00 /* ASPM Support */ #define PCI_EXP_LNKCAP_L0SEL 0x00007000 /* L0s Exit Latency */ @@ -456,6 +471,8 @@ #define PCI_EXP_LNKCAP_PN 0xff000000 /* Port Number */ #define PCI_EXP_LNKCTL 16 /* Link Control */ #define PCI_EXP_LNKCTL_ASPMC 0x0003 /* ASPM Control */ +#define PCI_EXP_LNKCTL_ASPM_L0S 0x01 /* L0s Enable */ +#define PCI_EXP_LNKCTL_ASPM_L1 0x02 /* L1 Enable */ #define PCI_EXP_LNKCTL_RCB 0x0008 /* Read Completion Boundary */ #define PCI_EXP_LNKCTL_LD 0x0010 /* Link Disable */ #define PCI_EXP_LNKCTL_RL 0x0020 /* Retrain Link */ @@ -544,9 +561,9 @@ #define PCI_EXP_OBFF_WAKE_EN 0x6000 /* OBFF using WAKE# signaling */ #define PCI_CAP_EXP_ENDPOINT_SIZEOF_V2 44 /* v2 endpoints end here */ #define PCI_EXP_LNKCAP2 44 /* Link Capability 2 */ -#define PCI_EXP_LNKCAP2_SLS_2_5GB 0x01 /* Current Link Speed 2.5GT/s */ -#define PCI_EXP_LNKCAP2_SLS_5_0GB 0x02 /* Current Link Speed 5.0GT/s */ -#define PCI_EXP_LNKCAP2_SLS_8_0GB 0x04 /* Current Link Speed 8.0GT/s */ +#define PCI_EXP_LNKCAP2_SLS_2_5GB 0x02 /* Supported Link Speed 2.5GT/s */ +#define PCI_EXP_LNKCAP2_SLS_5_0GB 0x04 /* Supported Link Speed 5.0GT/s */ +#define PCI_EXP_LNKCAP2_SLS_8_0GB 0x08 /* Supported Link Speed 8.0GT/s */ #define PCI_EXP_LNKCAP2_CROSSLINK 0x100 /* Crosslink supported */ #define PCI_EXP_LNKCTL2 48 /* Link Control 2 */ #define PCI_EXP_LNKSTA2 50 /* Link Status 2 */ diff --git a/include/uapi/linux/perf_event.h b/include/uapi/linux/perf_event.h index 4f63c05d27c9..9fa9c622a7f4 100644 --- a/include/uapi/linux/perf_event.h +++ b/include/uapi/linux/perf_event.h @@ -579,7 +579,8 @@ enum perf_event_type { * { u32 size; * char data[size];}&& PERF_SAMPLE_RAW * - * { u64 from, to, flags } lbr[nr];} && PERF_SAMPLE_BRANCH_STACK + * { u64 nr; + * { u64 from, to, flags } lbr[nr];} && PERF_SAMPLE_BRANCH_STACK * * { u64 abi; # enum perf_sample_regs_abi * u64 regs[weight(mask)]; } && PERF_SAMPLE_REGS_USER diff --git a/include/uapi/linux/ptp_clock.h b/include/uapi/linux/ptp_clock.h index 94e981f810a2..b65c834f83e9 100644 --- a/include/uapi/linux/ptp_clock.h +++ b/include/uapi/linux/ptp_clock.h @@ -67,12 +67,26 @@ struct ptp_perout_request { unsigned int rsv[4]; /* Reserved for future use. */ }; +#define PTP_MAX_SAMPLES 25 /* Maximum allowed offset measurement samples. */ + +struct ptp_sys_offset { + unsigned int n_samples; /* Desired number of measurements. */ + unsigned int rsv[3]; /* Reserved for future use. */ + /* + * Array of interleaved system/phc time stamps. The kernel + * will provide 2*n_samples + 1 time stamps, with the last + * one as a system time stamp. + */ + struct ptp_clock_time ts[2 * PTP_MAX_SAMPLES + 1]; +}; + #define PTP_CLK_MAGIC '=' #define PTP_CLOCK_GETCAPS _IOR(PTP_CLK_MAGIC, 1, struct ptp_clock_caps) #define PTP_EXTTS_REQUEST _IOW(PTP_CLK_MAGIC, 2, struct ptp_extts_request) #define PTP_PEROUT_REQUEST _IOW(PTP_CLK_MAGIC, 3, struct ptp_perout_request) #define PTP_ENABLE_PPS _IOW(PTP_CLK_MAGIC, 4, int) +#define PTP_SYS_OFFSET _IOW(PTP_CLK_MAGIC, 5, struct ptp_sys_offset) struct ptp_extts_event { struct ptp_clock_time t; /* Time event occured. */ diff --git a/include/uapi/linux/ptrace.h b/include/uapi/linux/ptrace.h index 1ef6c056a9e4..022ab186a812 100644 --- a/include/uapi/linux/ptrace.h +++ b/include/uapi/linux/ptrace.h @@ -73,7 +73,10 @@ #define PTRACE_O_TRACEEXIT (1 << PTRACE_EVENT_EXIT) #define PTRACE_O_TRACESECCOMP (1 << PTRACE_EVENT_SECCOMP) -#define PTRACE_O_MASK 0x000000ff +/* eventless options */ +#define PTRACE_O_EXITKILL (1 << 20) + +#define PTRACE_O_MASK (0x000000ff | PTRACE_O_EXITKILL) #include <asm/ptrace.h> diff --git a/include/uapi/linux/raid/md_p.h b/include/uapi/linux/raid/md_p.h index ee753536ab70..fe1a5406d4d9 100644 --- a/include/uapi/linux/raid/md_p.h +++ b/include/uapi/linux/raid/md_p.h @@ -145,16 +145,18 @@ typedef struct mdp_superblock_s { __u32 failed_disks; /* 4 Number of failed disks */ __u32 spare_disks; /* 5 Number of spare disks */ __u32 sb_csum; /* 6 checksum of the whole superblock */ -#ifdef __BIG_ENDIAN +#if defined(__BYTE_ORDER) ? __BYTE_ORDER == __BIG_ENDIAN : defined(__BIG_ENDIAN) __u32 events_hi; /* 7 high-order of superblock update count */ __u32 events_lo; /* 8 low-order of superblock update count */ __u32 cp_events_hi; /* 9 high-order of checkpoint update count */ __u32 cp_events_lo; /* 10 low-order of checkpoint update count */ -#else +#elif defined(__BYTE_ORDER) ? __BYTE_ORDER == __LITTLE_ENDIAN : defined(__LITTLE_ENDIAN) __u32 events_lo; /* 7 low-order of superblock update count */ __u32 events_hi; /* 8 high-order of superblock update count */ __u32 cp_events_lo; /* 9 low-order of checkpoint update count */ __u32 cp_events_hi; /* 10 high-order of checkpoint update count */ +#else +#error unspecified endianness #endif __u32 recovery_cp; /* 11 recovery checkpoint sector count */ /* There are only valid for minor_version > 90 */ diff --git a/include/uapi/linux/rtnetlink.h b/include/uapi/linux/rtnetlink.h index fcd768b09f6e..7a2144e1afae 100644 --- a/include/uapi/linux/rtnetlink.h +++ b/include/uapi/linux/rtnetlink.h @@ -120,6 +120,18 @@ enum { RTM_SETDCB, #define RTM_SETDCB RTM_SETDCB + RTM_NEWNETCONF = 80, +#define RTM_NEWNETCONF RTM_NEWNETCONF + RTM_GETNETCONF = 82, +#define RTM_GETNETCONF RTM_GETNETCONF + + RTM_NEWMDB = 84, +#define RTM_NEWMDB RTM_NEWMDB + RTM_DELMDB = 85, +#define RTM_DELMDB RTM_DELMDB + RTM_GETMDB = 86, +#define RTM_GETMDB RTM_GETMDB + __RTM_MAX, #define RTM_MAX (((__RTM_MAX + 3) & ~3) - 1) }; @@ -222,6 +234,7 @@ enum { #define RTPROT_XORP 14 /* XORP */ #define RTPROT_NTK 15 /* Netsukuku */ #define RTPROT_DHCP 16 /* DHCP client */ +#define RTPROT_MROUTED 17 /* Multicast daemon */ /* rtm_scope @@ -283,6 +296,7 @@ enum rtattr_type_t { RTA_MP_ALGO, /* no longer used */ RTA_TABLE, RTA_MARK, + RTA_MFC_STATS, __RTA_MAX }; @@ -403,6 +417,12 @@ struct rta_session { } u; }; +struct rta_mfc_stats { + __u64 mfcs_packets; + __u64 mfcs_bytes; + __u64 mfcs_wrong_if; +}; + /**** * General form of address family dependent message. ****/ @@ -587,6 +607,12 @@ enum rtnetlink_groups { #define RTNLGRP_PHONET_ROUTE RTNLGRP_PHONET_ROUTE RTNLGRP_DCB, #define RTNLGRP_DCB RTNLGRP_DCB + RTNLGRP_IPV4_NETCONF, +#define RTNLGRP_IPV4_NETCONF RTNLGRP_IPV4_NETCONF + RTNLGRP_IPV6_NETCONF, +#define RTNLGRP_IPV6_NETCONF RTNLGRP_IPV6_NETCONF + RTNLGRP_MDB, +#define RTNLGRP_MDB RTNLGRP_MDB __RTNLGRP_MAX }; #define RTNLGRP_MAX (__RTNLGRP_MAX - 1) @@ -604,6 +630,7 @@ struct tcamsg { /* New extended info filters for IFLA_EXT_MASK */ #define RTEXT_FILTER_VF (1 << 0) +#define RTEXT_FILTER_BRVLAN (1 << 1) /* End of information exported to user level */ diff --git a/include/uapi/linux/serial_core.h b/include/uapi/linux/serial_core.h index 7e1ab20adc03..74c2bf7211f8 100644 --- a/include/uapi/linux/serial_core.h +++ b/include/uapi/linux/serial_core.h @@ -49,7 +49,12 @@ #define PORT_XR17D15X 21 /* Exar XR17D15x UART */ #define PORT_LPC3220 22 /* NXP LPC32xx SoC "Standard" UART */ #define PORT_8250_CIR 23 /* CIR infrared port, has its own driver */ -#define PORT_MAX_8250 23 /* max port ID */ +#define PORT_XR17V35X 24 /* Exar XR17V35x UARTs */ +#define PORT_BRCM_TRUMANAGE 25 +#define PORT_ALTR_16550_F32 26 /* Altera 16550 UART with 32 FIFOs */ +#define PORT_ALTR_16550_F64 27 /* Altera 16550 UART with 64 FIFOs */ +#define PORT_ALTR_16550_F128 28 /* Altera 16550 UART with 128 FIFOs */ +#define PORT_MAX_8250 28 /* max port ID */ /* * ARM specific type numbers. These are not currently guaranteed @@ -215,5 +220,10 @@ /* Energy Micro efm32 SoC */ #define PORT_EFMUART 100 +/* ARC (Synopsys) on-chip UART */ +#define PORT_ARC 101 + +/* Rocketport EXPRESS/INFINITY */ +#define PORT_RP2 102 #endif /* _UAPILINUX_SERIAL_CORE_H */ diff --git a/include/uapi/linux/serial_reg.h b/include/uapi/linux/serial_reg.h index 5ed325e88a81..e6322605b138 100644 --- a/include/uapi/linux/serial_reg.h +++ b/include/uapi/linux/serial_reg.h @@ -367,5 +367,23 @@ #define UART_OMAP_MDR1_CIR_MODE 0x06 /* CIR mode */ #define UART_OMAP_MDR1_DISABLE 0x07 /* Disable (default state) */ +/* + * These are definitions for the Exar XR17V35X and XR17(C|D)15X + */ +#define UART_EXAR_8XMODE 0x88 /* 8X sampling rate select */ +#define UART_EXAR_SLEEP 0x8b /* Sleep mode */ +#define UART_EXAR_DVID 0x8d /* Device identification */ + +#define UART_EXAR_FCTR 0x08 /* Feature Control Register */ +#define UART_FCTR_EXAR_IRDA 0x08 /* IrDa data encode select */ +#define UART_FCTR_EXAR_485 0x10 /* Auto 485 half duplex dir ctl */ +#define UART_FCTR_EXAR_TRGA 0x00 /* FIFO trigger table A */ +#define UART_FCTR_EXAR_TRGB 0x60 /* FIFO trigger table B */ +#define UART_FCTR_EXAR_TRGC 0x80 /* FIFO trigger table C */ +#define UART_FCTR_EXAR_TRGD 0xc0 /* FIFO trigger table D programmable */ + +#define UART_EXAR_TXTRG 0x0a /* Tx FIFO trigger level write-only */ +#define UART_EXAR_RXTRG 0x0b /* Rx FIFO trigger level write-only */ + #endif /* _LINUX_SERIAL_REG_H */ diff --git a/include/uapi/linux/signal.h b/include/uapi/linux/signal.h index dff452ed6d00..e1bd50c29ded 100644 --- a/include/uapi/linux/signal.h +++ b/include/uapi/linux/signal.h @@ -4,5 +4,7 @@ #include <asm/signal.h> #include <asm/siginfo.h> +#define SS_ONSTACK 1 +#define SS_DISABLE 2 #endif /* _UAPI_LINUX_SIGNAL_H */ diff --git a/include/uapi/linux/snmp.h b/include/uapi/linux/snmp.h index fdfba235f9f1..b49eab89c9fd 100644 --- a/include/uapi/linux/snmp.h +++ b/include/uapi/linux/snmp.h @@ -278,6 +278,7 @@ enum LINUX_MIB_XFRMOUTPOLDEAD, /* XfrmOutPolDead */ LINUX_MIB_XFRMOUTPOLERROR, /* XfrmOutPolError */ LINUX_MIB_XFRMFWDHDRERROR, /* XfrmFwdHdrError*/ + LINUX_MIB_XFRMOUTSTATEINVALID, /* XfrmOutStateInvalid */ __LINUX_MIB_XFRMMAX }; diff --git a/include/uapi/linux/swab.h b/include/uapi/linux/swab.h index e811474724c2..0e011eb91b5d 100644 --- a/include/uapi/linux/swab.h +++ b/include/uapi/linux/swab.h @@ -45,7 +45,9 @@ static inline __attribute_const__ __u16 __fswab16(__u16 val) { -#ifdef __arch_swab16 +#ifdef __HAVE_BUILTIN_BSWAP16__ + return __builtin_bswap16(val); +#elif defined (__arch_swab16) return __arch_swab16(val); #else return ___constant_swab16(val); @@ -54,7 +56,9 @@ static inline __attribute_const__ __u16 __fswab16(__u16 val) static inline __attribute_const__ __u32 __fswab32(__u32 val) { -#ifdef __arch_swab32 +#ifdef __HAVE_BUILTIN_BSWAP32__ + return __builtin_bswap32(val); +#elif defined(__arch_swab32) return __arch_swab32(val); #else return ___constant_swab32(val); @@ -63,7 +67,9 @@ static inline __attribute_const__ __u32 __fswab32(__u32 val) static inline __attribute_const__ __u64 __fswab64(__u64 val) { -#ifdef __arch_swab64 +#ifdef __HAVE_BUILTIN_BSWAP64__ + return __builtin_bswap64(val); +#elif defined (__arch_swab64) return __arch_swab64(val); #elif defined(__SWAB_64_THRU_32__) __u32 h = val >> 32; diff --git a/include/uapi/linux/tcp.h b/include/uapi/linux/tcp.h index e962faa5ab0d..6b1ead0b0c9d 100644 --- a/include/uapi/linux/tcp.h +++ b/include/uapi/linux/tcp.h @@ -111,6 +111,7 @@ enum { #define TCP_QUEUE_SEQ 21 #define TCP_REPAIR_OPTIONS 22 #define TCP_FASTOPEN 23 /* Enable FastOpen on listeners */ +#define TCP_TIMESTAMP 24 struct tcp_repair_opt { __u32 opt_code; diff --git a/include/uapi/linux/uhid.h b/include/uapi/linux/uhid.h index 9c6974f16966..e9ed951e2b09 100644 --- a/include/uapi/linux/uhid.h +++ b/include/uapi/linux/uhid.h @@ -86,7 +86,7 @@ struct uhid_feature_answer_req { __u16 err; __u16 size; __u8 data[UHID_DATA_MAX]; -}; +} __attribute__((__packed__)); struct uhid_event { __u32 type; diff --git a/include/uapi/linux/unix_diag.h b/include/uapi/linux/unix_diag.h index b1d2bf16b33c..b8a24941db21 100644 --- a/include/uapi/linux/unix_diag.h +++ b/include/uapi/linux/unix_diag.h @@ -37,6 +37,7 @@ enum { UNIX_DIAG_ICONS, UNIX_DIAG_RQLEN, UNIX_DIAG_MEMINFO, + UNIX_DIAG_SHUTDOWN, UNIX_DIAG_MAX, }; diff --git a/include/uapi/linux/usb/audio.h b/include/uapi/linux/usb/audio.h index ac90037894d9..d2314be4f0c0 100644 --- a/include/uapi/linux/usb/audio.h +++ b/include/uapi/linux/usb/audio.h @@ -384,14 +384,16 @@ static inline __u8 uac_processing_unit_iProcessing(struct uac_processing_unit_de int protocol) { __u8 control_size = uac_processing_unit_bControlSize(desc, protocol); - return desc->baSourceID[desc->bNrInPins + control_size]; + return *(uac_processing_unit_bmControls(desc, protocol) + + control_size); } static inline __u8 *uac_processing_unit_specific(struct uac_processing_unit_descriptor *desc, int protocol) { __u8 control_size = uac_processing_unit_bControlSize(desc, protocol); - return &desc->baSourceID[desc->bNrInPins + control_size + 1]; + return uac_processing_unit_bmControls(desc, protocol) + + control_size + 1; } /* 4.5.2 Class-Specific AS Interface Descriptor */ diff --git a/include/uapi/linux/usb/cdc.h b/include/uapi/linux/usb/cdc.h index 81a927930bfd..f35aa0a338c7 100644 --- a/include/uapi/linux/usb/cdc.h +++ b/include/uapi/linux/usb/cdc.h @@ -19,6 +19,7 @@ #define USB_CDC_SUBCLASS_OBEX 0x0b #define USB_CDC_SUBCLASS_EEM 0x0c #define USB_CDC_SUBCLASS_NCM 0x0d +#define USB_CDC_SUBCLASS_MBIM 0x0e #define USB_CDC_PROTO_NONE 0 @@ -33,6 +34,7 @@ #define USB_CDC_PROTO_EEM 7 #define USB_CDC_NCM_PROTO_NTB 1 +#define USB_CDC_MBIM_PROTO_NTB 2 /*-------------------------------------------------------------------------*/ @@ -53,6 +55,7 @@ #define USB_CDC_DMM_TYPE 0x14 #define USB_CDC_OBEX_TYPE 0x15 #define USB_CDC_NCM_TYPE 0x1a +#define USB_CDC_MBIM_TYPE 0x1b /* "Header Functional Descriptor" from CDC spec 5.2.3.1 */ struct usb_cdc_header_desc { @@ -187,6 +190,21 @@ struct usb_cdc_ncm_desc { __le16 bcdNcmVersion; __u8 bmNetworkCapabilities; } __attribute__ ((packed)); + +/* "MBIM Control Model Functional Descriptor" */ +struct usb_cdc_mbim_desc { + __u8 bLength; + __u8 bDescriptorType; + __u8 bDescriptorSubType; + + __le16 bcdMBIMVersion; + __le16 wMaxControlMessage; + __u8 bNumberFilters; + __u8 bMaxFilterSize; + __le16 wMaxSegmentSize; + __u8 bmNetworkCapabilities; +} __attribute__ ((packed)); + /*-------------------------------------------------------------------------*/ /* @@ -332,6 +350,11 @@ struct usb_cdc_ncm_nth32 { #define USB_CDC_NCM_NDP32_CRC_SIGN 0x316D636E /* ncm1 */ #define USB_CDC_NCM_NDP32_NOCRC_SIGN 0x306D636E /* ncm0 */ +#define USB_CDC_MBIM_NDP16_IPS_SIGN 0x00535049 /* IPS<sessionID> : IPS0 for now */ +#define USB_CDC_MBIM_NDP32_IPS_SIGN 0x00737069 /* ips<sessionID> : ips0 for now */ +#define USB_CDC_MBIM_NDP16_DSS_SIGN 0x00535344 /* DSS<sessionID> */ +#define USB_CDC_MBIM_NDP32_DSS_SIGN 0x00737364 /* dss<sessionID> */ + /* 16-bit NCM Datagram Pointer Entry */ struct usb_cdc_ncm_dpe16 { __le16 wDatagramIndex; diff --git a/include/uapi/linux/usb/ch9.h b/include/uapi/linux/usb/ch9.h index 50598472dc41..f738e25377ff 100644 --- a/include/uapi/linux/usb/ch9.h +++ b/include/uapi/linux/usb/ch9.h @@ -152,6 +152,12 @@ #define USB_INTRF_FUNC_SUSPEND_LP (1 << (8 + 0)) #define USB_INTRF_FUNC_SUSPEND_RW (1 << (8 + 1)) +/* + * Interface status, Figure 9-5 USB 3.0 spec + */ +#define USB_INTRF_STAT_FUNC_RW_CAP 1 +#define USB_INTRF_STAT_FUNC_RW 2 + #define USB_ENDPOINT_HALT 0 /* IN/OUT will STALL */ /* Bit array elements as returned by the USB_REQ_GET_STATUS request. */ diff --git a/include/uapi/linux/v4l2-controls.h b/include/uapi/linux/v4l2-controls.h index f56c945cecd4..dcd63745e83a 100644 --- a/include/uapi/linux/v4l2-controls.h +++ b/include/uapi/linux/v4l2-controls.h @@ -88,10 +88,6 @@ #define V4L2_CID_HFLIP (V4L2_CID_BASE+20) #define V4L2_CID_VFLIP (V4L2_CID_BASE+21) -/* Deprecated; use V4L2_CID_PAN_RESET and V4L2_CID_TILT_RESET */ -#define V4L2_CID_HCENTER (V4L2_CID_BASE+22) -#define V4L2_CID_VCENTER (V4L2_CID_BASE+23) - #define V4L2_CID_POWER_LINE_FREQUENCY (V4L2_CID_BASE+24) enum v4l2_power_line_frequency { V4L2_CID_POWER_LINE_FREQUENCY_DISABLED = 0, @@ -144,6 +140,11 @@ enum v4l2_colorfx { /* last CID + 1 */ #define V4L2_CID_LASTP1 (V4L2_CID_BASE+43) +/* USER-class private control IDs */ + +/* The base for the meye driver controls. See linux/meye.h for the list + * of controls. We reserve 16 controls for this driver. */ +#define V4L2_CID_USER_MEYE_BASE (V4L2_CID_USER_BASE + 0x1000) /* MPEG-class control IDs */ @@ -782,6 +783,7 @@ enum v4l2_jpeg_chroma_subsampling { #define V4L2_JPEG_ACTIVE_MARKER_DQT (1 << 17) #define V4L2_JPEG_ACTIVE_MARKER_DHT (1 << 18) + /* Image source controls */ #define V4L2_CID_IMAGE_SOURCE_CLASS_BASE (V4L2_CTRL_CLASS_IMAGE_SOURCE | 0x900) #define V4L2_CID_IMAGE_SOURCE_CLASS (V4L2_CTRL_CLASS_IMAGE_SOURCE | 1) @@ -800,4 +802,27 @@ enum v4l2_jpeg_chroma_subsampling { #define V4L2_CID_PIXEL_RATE (V4L2_CID_IMAGE_PROC_CLASS_BASE + 2) #define V4L2_CID_TEST_PATTERN (V4L2_CID_IMAGE_PROC_CLASS_BASE + 3) + +/* DV-class control IDs defined by V4L2 */ +#define V4L2_CID_DV_CLASS_BASE (V4L2_CTRL_CLASS_DV | 0x900) +#define V4L2_CID_DV_CLASS (V4L2_CTRL_CLASS_DV | 1) + +#define V4L2_CID_DV_TX_HOTPLUG (V4L2_CID_DV_CLASS_BASE + 1) +#define V4L2_CID_DV_TX_RXSENSE (V4L2_CID_DV_CLASS_BASE + 2) +#define V4L2_CID_DV_TX_EDID_PRESENT (V4L2_CID_DV_CLASS_BASE + 3) +#define V4L2_CID_DV_TX_MODE (V4L2_CID_DV_CLASS_BASE + 4) +enum v4l2_dv_tx_mode { + V4L2_DV_TX_MODE_DVI_D = 0, + V4L2_DV_TX_MODE_HDMI = 1, +}; +#define V4L2_CID_DV_TX_RGB_RANGE (V4L2_CID_DV_CLASS_BASE + 5) +enum v4l2_dv_rgb_range { + V4L2_DV_RGB_RANGE_AUTO = 0, + V4L2_DV_RGB_RANGE_LIMITED = 1, + V4L2_DV_RGB_RANGE_FULL = 2, +}; + +#define V4L2_CID_DV_RX_POWER_PRESENT (V4L2_CID_DV_CLASS_BASE + 100) +#define V4L2_CID_DV_RX_RGB_RANGE (V4L2_CID_DV_CLASS_BASE + 101) + #endif diff --git a/include/uapi/linux/v4l2-mediabus.h b/include/uapi/linux/v4l2-mediabus.h index 7d64e0e1a18b..b9b7bea04537 100644 --- a/include/uapi/linux/v4l2-mediabus.h +++ b/include/uapi/linux/v4l2-mediabus.h @@ -47,8 +47,9 @@ enum v4l2_mbus_pixelcode { V4L2_MBUS_FMT_RGB565_2X8_BE = 0x1007, V4L2_MBUS_FMT_RGB565_2X8_LE = 0x1008, - /* YUV (including grey) - next is 0x2014 */ + /* YUV (including grey) - next is 0x2017 */ V4L2_MBUS_FMT_Y8_1X8 = 0x2001, + V4L2_MBUS_FMT_UV8_1X8 = 0x2015, V4L2_MBUS_FMT_UYVY8_1_5X8 = 0x2002, V4L2_MBUS_FMT_VYUY8_1_5X8 = 0x2003, V4L2_MBUS_FMT_YUYV8_1_5X8 = 0x2004, @@ -65,14 +66,20 @@ enum v4l2_mbus_pixelcode { V4L2_MBUS_FMT_VYUY8_1X16 = 0x2010, V4L2_MBUS_FMT_YUYV8_1X16 = 0x2011, V4L2_MBUS_FMT_YVYU8_1X16 = 0x2012, + V4L2_MBUS_FMT_YDYUYDYV8_1X16 = 0x2014, V4L2_MBUS_FMT_YUYV10_1X20 = 0x200d, V4L2_MBUS_FMT_YVYU10_1X20 = 0x200e, + V4L2_MBUS_FMT_YUV10_1X30 = 0x2016, - /* Bayer - next is 0x3015 */ + /* Bayer - next is 0x3019 */ V4L2_MBUS_FMT_SBGGR8_1X8 = 0x3001, V4L2_MBUS_FMT_SGBRG8_1X8 = 0x3013, V4L2_MBUS_FMT_SGRBG8_1X8 = 0x3002, V4L2_MBUS_FMT_SRGGB8_1X8 = 0x3014, + V4L2_MBUS_FMT_SBGGR10_ALAW8_1X8 = 0x3015, + V4L2_MBUS_FMT_SGBRG10_ALAW8_1X8 = 0x3016, + V4L2_MBUS_FMT_SGRBG10_ALAW8_1X8 = 0x3017, + V4L2_MBUS_FMT_SRGGB10_ALAW8_1X8 = 0x3018, V4L2_MBUS_FMT_SBGGR10_DPCM8_1X8 = 0x300b, V4L2_MBUS_FMT_SGBRG10_DPCM8_1X8 = 0x300c, V4L2_MBUS_FMT_SGRBG10_DPCM8_1X8 = 0x3009, diff --git a/include/uapi/linux/vfio.h b/include/uapi/linux/vfio.h index 4758d1bfcf41..4f41f309911e 100644 --- a/include/uapi/linux/vfio.h +++ b/include/uapi/linux/vfio.h @@ -303,6 +303,15 @@ enum { VFIO_PCI_BAR5_REGION_INDEX, VFIO_PCI_ROM_REGION_INDEX, VFIO_PCI_CONFIG_REGION_INDEX, + /* + * Expose VGA regions defined for PCI base class 03, subclass 00. + * This includes I/O port ranges 0x3b0 to 0x3bb and 0x3c0 to 0x3df + * as well as the MMIO range 0xa0000 to 0xbffff. Each implemented + * range is found at it's identity mapped offset from the region + * offset, for example 0x3b0 is region_info.offset + 0x3b0. Areas + * between described ranges are unimplemented. + */ + VFIO_PCI_VGA_REGION_INDEX, VFIO_PCI_NUM_REGIONS }; diff --git a/include/uapi/linux/videodev2.h b/include/uapi/linux/videodev2.h index 57bfa59cda74..234d1d870914 100644 --- a/include/uapi/linux/videodev2.h +++ b/include/uapi/linux/videodev2.h @@ -186,6 +186,7 @@ enum v4l2_memory { V4L2_MEMORY_MMAP = 1, V4L2_MEMORY_USERPTR = 2, V4L2_MEMORY_OVERLAY = 3, + V4L2_MEMORY_DMABUF = 4, }; /* see also http://vektor.theorem.ca/graphics/ycbcr/ */ @@ -333,6 +334,9 @@ struct v4l2_pix_format { /* Palette formats */ #define V4L2_PIX_FMT_PAL8 v4l2_fourcc('P', 'A', 'L', '8') /* 8 8-bit palette */ +/* Chrominance formats */ +#define V4L2_PIX_FMT_UV8 v4l2_fourcc('U', 'V', '8', ' ') /* 8 UV 4:4 */ + /* Luminance+Chrominance formats */ #define V4L2_PIX_FMT_YVU410 v4l2_fourcc('Y', 'V', 'U', '9') /* 9 YVU 4:1:0 */ #define V4L2_PIX_FMT_YVU420 v4l2_fourcc('Y', 'V', '1', '2') /* 12 YVU 4:2:0 */ @@ -385,6 +389,11 @@ struct v4l2_pix_format { #define V4L2_PIX_FMT_SGBRG12 v4l2_fourcc('G', 'B', '1', '2') /* 12 GBGB.. RGRG.. */ #define V4L2_PIX_FMT_SGRBG12 v4l2_fourcc('B', 'A', '1', '2') /* 12 GRGR.. BGBG.. */ #define V4L2_PIX_FMT_SRGGB12 v4l2_fourcc('R', 'G', '1', '2') /* 12 RGRG.. GBGB.. */ + /* 10bit raw bayer a-law compressed to 8 bits */ +#define V4L2_PIX_FMT_SBGGR10ALAW8 v4l2_fourcc('a', 'B', 'A', '8') +#define V4L2_PIX_FMT_SGBRG10ALAW8 v4l2_fourcc('a', 'G', 'A', '8') +#define V4L2_PIX_FMT_SGRBG10ALAW8 v4l2_fourcc('a', 'g', 'A', '8') +#define V4L2_PIX_FMT_SRGGB10ALAW8 v4l2_fourcc('a', 'R', 'A', '8') /* 10bit raw bayer DPCM compressed to 8 bits */ #define V4L2_PIX_FMT_SBGGR10DPCM8 v4l2_fourcc('b', 'B', 'A', '8') #define V4L2_PIX_FMT_SGBRG10DPCM8 v4l2_fourcc('b', 'G', 'A', '8') @@ -602,6 +611,8 @@ struct v4l2_requestbuffers { * should be passed to mmap() called on the video node) * @userptr: when memory is V4L2_MEMORY_USERPTR, a userspace pointer * pointing to this plane + * @fd: when memory is V4L2_MEMORY_DMABUF, a userspace file + * descriptor associated with this plane * @data_offset: offset in the plane to the start of data; usually 0, * unless there is a header in front of the data * @@ -616,6 +627,7 @@ struct v4l2_plane { union { __u32 mem_offset; unsigned long userptr; + __s32 fd; } m; __u32 data_offset; __u32 reserved[11]; @@ -640,6 +652,8 @@ struct v4l2_plane { * (or a "cookie" that should be passed to mmap() as offset) * @userptr: for non-multiplanar buffers with memory == V4L2_MEMORY_USERPTR; * a userspace pointer pointing to this buffer + * @fd: for non-multiplanar buffers with memory == V4L2_MEMORY_DMABUF; + * a userspace file descriptor associated with this buffer * @planes: for multiplanar buffers; userspace pointer to the array of plane * info structs for this buffer * @length: size in bytes of the buffer (NOT its payload) for single-plane @@ -666,6 +680,7 @@ struct v4l2_buffer { __u32 offset; unsigned long userptr; struct v4l2_plane *planes; + __s32 fd; } m; __u32 length; __u32 reserved2; @@ -686,6 +701,37 @@ struct v4l2_buffer { /* Cache handling flags */ #define V4L2_BUF_FLAG_NO_CACHE_INVALIDATE 0x0800 #define V4L2_BUF_FLAG_NO_CACHE_CLEAN 0x1000 +/* Timestamp type */ +#define V4L2_BUF_FLAG_TIMESTAMP_MASK 0xe000 +#define V4L2_BUF_FLAG_TIMESTAMP_UNKNOWN 0x0000 +#define V4L2_BUF_FLAG_TIMESTAMP_MONOTONIC 0x2000 + +/** + * struct v4l2_exportbuffer - export of video buffer as DMABUF file descriptor + * + * @index: id number of the buffer + * @type: enum v4l2_buf_type; buffer type (type == *_MPLANE for + * multiplanar buffers); + * @plane: index of the plane to be exported, 0 for single plane queues + * @flags: flags for newly created file, currently only O_CLOEXEC is + * supported, refer to manual of open syscall for more details + * @fd: file descriptor associated with DMABUF (set by driver) + * + * Contains data used for exporting a video buffer as DMABUF file descriptor. + * The buffer is identified by a 'cookie' returned by VIDIOC_QUERYBUF + * (identical to the cookie used to mmap() the buffer to userspace). All + * reserved fields must be set to zero. The field reserved0 is expected to + * become a structure 'type' allowing an alternative layout of the structure + * content. Therefore this field should not be used for any other extensions. + */ +struct v4l2_exportbuffer { + __u32 type; /* enum v4l2_buf_type */ + __u32 index; + __u32 plane; + __u32 flags; + __s32 fd; + __u32 reserved[11]; +}; /* * O V E R L A Y P R E V I E W @@ -737,7 +783,7 @@ struct v4l2_window { struct v4l2_captureparm { __u32 capability; /* Supported modes */ __u32 capturemode; /* Current mode */ - struct v4l2_fract timeperframe; /* Time per frame in .1us units */ + struct v4l2_fract timeperframe; /* Time per frame in seconds */ __u32 extendedmode; /* Driver-specific extensions */ __u32 readbuffers; /* # of buffers for read */ __u32 reserved[4]; @@ -1308,28 +1354,6 @@ struct v4l2_querymenu { #define V4L2_CID_PRIVATE_BASE 0x08000000 -/* DV-class control IDs defined by V4L2 */ -#define V4L2_CID_DV_CLASS_BASE (V4L2_CTRL_CLASS_DV | 0x900) -#define V4L2_CID_DV_CLASS (V4L2_CTRL_CLASS_DV | 1) - -#define V4L2_CID_DV_TX_HOTPLUG (V4L2_CID_DV_CLASS_BASE + 1) -#define V4L2_CID_DV_TX_RXSENSE (V4L2_CID_DV_CLASS_BASE + 2) -#define V4L2_CID_DV_TX_EDID_PRESENT (V4L2_CID_DV_CLASS_BASE + 3) -#define V4L2_CID_DV_TX_MODE (V4L2_CID_DV_CLASS_BASE + 4) -enum v4l2_dv_tx_mode { - V4L2_DV_TX_MODE_DVI_D = 0, - V4L2_DV_TX_MODE_HDMI = 1, -}; -#define V4L2_CID_DV_TX_RGB_RANGE (V4L2_CID_DV_CLASS_BASE + 5) -enum v4l2_dv_rgb_range { - V4L2_DV_RGB_RANGE_AUTO = 0, - V4L2_DV_RGB_RANGE_LIMITED = 1, - V4L2_DV_RGB_RANGE_FULL = 2, -}; - -#define V4L2_CID_DV_RX_POWER_PRESENT (V4L2_CID_DV_CLASS_BASE + 100) -#define V4L2_CID_DV_RX_RGB_RANGE (V4L2_CID_DV_CLASS_BASE + 101) - /* * T U N I N G */ @@ -1776,6 +1800,7 @@ struct v4l2_event_vsync { /* Payload for V4L2_EVENT_CTRL */ #define V4L2_EVENT_CTRL_CH_VALUE (1 << 0) #define V4L2_EVENT_CTRL_CH_FLAGS (1 << 1) +#define V4L2_EVENT_CTRL_CH_RANGE (1 << 2) struct v4l2_event_ctrl { __u32 changes; @@ -1888,6 +1913,7 @@ struct v4l2_create_buffers { #define VIDIOC_S_FBUF _IOW('V', 11, struct v4l2_framebuffer) #define VIDIOC_OVERLAY _IOW('V', 14, int) #define VIDIOC_QBUF _IOWR('V', 15, struct v4l2_buffer) +#define VIDIOC_EXPBUF _IOWR('V', 16, struct v4l2_exportbuffer) #define VIDIOC_DQBUF _IOWR('V', 17, struct v4l2_buffer) #define VIDIOC_STREAMON _IOW('V', 18, int) #define VIDIOC_STREAMOFF _IOW('V', 19, int) diff --git a/include/uapi/linux/virtio_ids.h b/include/uapi/linux/virtio_ids.h index 270fb22c5811..a7630d04029f 100644 --- a/include/uapi/linux/virtio_ids.h +++ b/include/uapi/linux/virtio_ids.h @@ -37,5 +37,6 @@ #define VIRTIO_ID_RPMSG 7 /* virtio remote processor messaging */ #define VIRTIO_ID_SCSI 8 /* virtio scsi */ #define VIRTIO_ID_9P 9 /* 9p virtio console */ +#define VIRTIO_ID_RPROC_SERIAL 11 /* virtio remoteproc serial link */ #endif /* _LINUX_VIRTIO_IDS_H */ diff --git a/include/uapi/linux/virtio_net.h b/include/uapi/linux/virtio_net.h index 2470f541af50..a5a8c88753b9 100644 --- a/include/uapi/linux/virtio_net.h +++ b/include/uapi/linux/virtio_net.h @@ -51,6 +51,9 @@ #define VIRTIO_NET_F_CTRL_RX_EXTRA 20 /* Extra RX mode control support */ #define VIRTIO_NET_F_GUEST_ANNOUNCE 21 /* Guest can announce device on the * network */ +#define VIRTIO_NET_F_MQ 22 /* Device supports Receive Flow + * Steering */ +#define VIRTIO_NET_F_CTRL_MAC_ADDR 23 /* Set MAC address */ #define VIRTIO_NET_S_LINK_UP 1 /* Link is up */ #define VIRTIO_NET_S_ANNOUNCE 2 /* Announcement is needed */ @@ -60,6 +63,11 @@ struct virtio_net_config { __u8 mac[6]; /* See VIRTIO_NET_F_STATUS and VIRTIO_NET_S_* above */ __u16 status; + /* Maximum number of each of transmit and receive queues; + * see VIRTIO_NET_F_MQ and VIRTIO_NET_CTRL_MQ. + * Legal values are between 1 and 0x8000 + */ + __u16 max_virtqueue_pairs; } __attribute__((packed)); /* This is the first element of the scatter-gather list. If you don't @@ -120,7 +128,7 @@ typedef __u8 virtio_net_ctrl_ack; #define VIRTIO_NET_CTRL_RX_NOBCAST 5 /* - * Control the MAC filter table. + * Control the MAC * * The MAC filter table is managed by the hypervisor, the guest should * assume the size is infinite. Filtering should be considered @@ -133,6 +141,10 @@ typedef __u8 virtio_net_ctrl_ack; * first sg list contains unicast addresses, the second is for multicast. * This functionality is present if the VIRTIO_NET_F_CTRL_RX feature * is available. + * + * The ADDR_SET command requests one out scatterlist, it contains a + * 6 bytes MAC address. This functionality is present if the + * VIRTIO_NET_F_CTRL_MAC_ADDR feature is available. */ struct virtio_net_ctrl_mac { __u32 entries; @@ -141,6 +153,7 @@ struct virtio_net_ctrl_mac { #define VIRTIO_NET_CTRL_MAC 1 #define VIRTIO_NET_CTRL_MAC_TABLE_SET 0 + #define VIRTIO_NET_CTRL_MAC_ADDR_SET 1 /* * Control VLAN filtering @@ -166,4 +179,24 @@ struct virtio_net_ctrl_mac { #define VIRTIO_NET_CTRL_ANNOUNCE 3 #define VIRTIO_NET_CTRL_ANNOUNCE_ACK 0 +/* + * Control Receive Flow Steering + * + * The command VIRTIO_NET_CTRL_MQ_VQ_PAIRS_SET + * enables Receive Flow Steering, specifying the number of the transmit and + * receive queues that will be used. After the command is consumed and acked by + * the device, the device will not steer new packets on receive virtqueues + * other than specified nor read from transmit virtqueues other than specified. + * Accordingly, driver should not transmit new packets on virtqueues other than + * specified. + */ +struct virtio_net_ctrl_mq { + u16 virtqueue_pairs; +}; + +#define VIRTIO_NET_CTRL_MQ 4 + #define VIRTIO_NET_CTRL_MQ_VQ_PAIRS_SET 0 + #define VIRTIO_NET_CTRL_MQ_VQ_PAIRS_MIN 1 + #define VIRTIO_NET_CTRL_MQ_VQ_PAIRS_MAX 0x8000 + #endif /* _LINUX_VIRTIO_NET_H */ diff --git a/include/uapi/linux/vm_sockets.h b/include/uapi/linux/vm_sockets.h new file mode 100644 index 000000000000..df91301847ec --- /dev/null +++ b/include/uapi/linux/vm_sockets.h @@ -0,0 +1,163 @@ +/* + * VMware vSockets Driver + * + * Copyright (C) 2007-2013 VMware, Inc. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the Free + * Software Foundation version 2 and no later version. + * + * This program is distributed in the hope that it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + */ + +#ifndef _VM_SOCKETS_H_ +#define _VM_SOCKETS_H_ + +#if !defined(__KERNEL__) +#include <sys/socket.h> +#endif + +/* Option name for STREAM socket buffer size. Use as the option name in + * setsockopt(3) or getsockopt(3) to set or get an unsigned long long that + * specifies the size of the buffer underlying a vSockets STREAM socket. + * Value is clamped to the MIN and MAX. + */ + +#define SO_VM_SOCKETS_BUFFER_SIZE 0 + +/* Option name for STREAM socket minimum buffer size. Use as the option name + * in setsockopt(3) or getsockopt(3) to set or get an unsigned long long that + * specifies the minimum size allowed for the buffer underlying a vSockets + * STREAM socket. + */ + +#define SO_VM_SOCKETS_BUFFER_MIN_SIZE 1 + +/* Option name for STREAM socket maximum buffer size. Use as the option name + * in setsockopt(3) or getsockopt(3) to set or get an unsigned long long + * that specifies the maximum size allowed for the buffer underlying a + * vSockets STREAM socket. + */ + +#define SO_VM_SOCKETS_BUFFER_MAX_SIZE 2 + +/* Option name for socket peer's host-specific VM ID. Use as the option name + * in getsockopt(3) to get a host-specific identifier for the peer endpoint's + * VM. The identifier is a signed integer. + * Only available for hypervisor endpoints. + */ + +#define SO_VM_SOCKETS_PEER_HOST_VM_ID 3 + +/* Option name for determining if a socket is trusted. Use as the option name + * in getsockopt(3) to determine if a socket is trusted. The value is a + * signed integer. + */ + +#define SO_VM_SOCKETS_TRUSTED 5 + +/* Option name for STREAM socket connection timeout. Use as the option name + * in setsockopt(3) or getsockopt(3) to set or get the connection + * timeout for a STREAM socket. + */ + +#define SO_VM_SOCKETS_CONNECT_TIMEOUT 6 + +/* Option name for using non-blocking send/receive. Use as the option name + * for setsockopt(3) or getsockopt(3) to set or get the non-blocking + * transmit/receive flag for a STREAM socket. This flag determines whether + * send() and recv() can be called in non-blocking contexts for the given + * socket. The value is a signed integer. + * + * This option is only relevant to kernel endpoints, where descheduling the + * thread of execution is not allowed, for example, while holding a spinlock. + * It is not to be confused with conventional non-blocking socket operations. + * + * Only available for hypervisor endpoints. + */ + +#define SO_VM_SOCKETS_NONBLOCK_TXRX 7 + +/* The vSocket equivalent of INADDR_ANY. This works for the svm_cid field of + * sockaddr_vm and indicates the context ID of the current endpoint. + */ + +#define VMADDR_CID_ANY -1U + +/* Bind to any available port. Works for the svm_port field of + * sockaddr_vm. + */ + +#define VMADDR_PORT_ANY -1U + +/* Use this as the destination CID in an address when referring to the + * hypervisor. VMCI relies on it being 0, but this would be useful for other + * transports too. + */ + +#define VMADDR_CID_HYPERVISOR 0 + +/* This CID is specific to VMCI and can be considered reserved (even VMCI + * doesn't use it anymore, it's a legacy value from an older release). + */ + +#define VMADDR_CID_RESERVED 1 + +/* Use this as the destination CID in an address when referring to the host + * (any process other than the hypervisor). VMCI relies on it being 2, but + * this would be useful for other transports too. + */ + +#define VMADDR_CID_HOST 2 + +/* Invalid vSockets version. */ + +#define VM_SOCKETS_INVALID_VERSION -1U + +/* The epoch (first) component of the vSockets version. A single byte + * representing the epoch component of the vSockets version. + */ + +#define VM_SOCKETS_VERSION_EPOCH(_v) (((_v) & 0xFF000000) >> 24) + +/* The major (second) component of the vSockets version. A single byte + * representing the major component of the vSockets version. Typically + * changes for every major release of a product. + */ + +#define VM_SOCKETS_VERSION_MAJOR(_v) (((_v) & 0x00FF0000) >> 16) + +/* The minor (third) component of the vSockets version. Two bytes representing + * the minor component of the vSockets version. + */ + +#define VM_SOCKETS_VERSION_MINOR(_v) (((_v) & 0x0000FFFF)) + +/* Address structure for vSockets. The address family should be set to + * whatever vmci_sock_get_af_value_fd() returns. The structure members should + * all align on their natural boundaries without resorting to compiler packing + * directives. The total size of this structure should be exactly the same as + * that of struct sockaddr. + */ + +struct sockaddr_vm { + sa_family_t svm_family; + unsigned short svm_reserved1; + unsigned int svm_port; + unsigned int svm_cid; + unsigned char svm_zero[sizeof(struct sockaddr) - + sizeof(sa_family_t) - + sizeof(unsigned short) - + sizeof(unsigned int) - sizeof(unsigned int)]; +}; + +#define IOCTL_VM_SOCKETS_GET_LOCAL_CID _IO(7, 0xb9) + +#if defined(__KERNEL__) +int vm_sockets_get_local_cid(void); +#endif + +#endif diff --git a/include/uapi/linux/wanrouter.h b/include/uapi/linux/wanrouter.h index 7617df2833d5..498d6c12c666 100644 --- a/include/uapi/linux/wanrouter.h +++ b/include/uapi/linux/wanrouter.h @@ -1,363 +1,9 @@ -/***************************************************************************** -* wanrouter.h Definitions for the WAN Multiprotocol Router Module. -* This module provides API and common services for WAN Link -* Drivers and is completely hardware-independent. -* -* Author: Nenad Corbic <ncorbic@sangoma.com> -* Gideon Hack -* Additions: Arnaldo Melo -* -* Copyright: (c) 1995-2000 Sangoma Technologies Inc. -* -* This program is free software; you can redistribute it and/or -* modify it under the terms of the GNU General Public License -* as published by the Free Software Foundation; either version -* 2 of the License, or (at your option) any later version. -* ============================================================================ -* Jul 21, 2000 Nenad Corbic Added WAN_FT1_READY State -* Feb 24, 2000 Nenad Corbic Added support for socket based x25api -* Jan 28, 2000 Nenad Corbic Added support for the ASYNC protocol. -* Oct 04, 1999 Nenad Corbic Updated for 2.1.0 release -* Jun 02, 1999 Gideon Hack Added support for the S514 adapter. -* May 23, 1999 Arnaldo Melo Added local_addr to wanif_conf_t -* WAN_DISCONNECTING state added -* Jul 20, 1998 David Fong Added Inverse ARP options to 'wanif_conf_t' -* Jun 12, 1998 David Fong Added Cisco HDLC support. -* Dec 16, 1997 Jaspreet Singh Moved 'enable_IPX' and 'network_number' to -* 'wanif_conf_t' -* Dec 05, 1997 Jaspreet Singh Added 'pap', 'chap' to 'wanif_conf_t' -* Added 'authenticator' to 'wan_ppp_conf_t' -* Nov 06, 1997 Jaspreet Singh Changed Router Driver version to 1.1 from 1.0 -* Oct 20, 1997 Jaspreet Singh Added 'cir','bc','be' and 'mc' to 'wanif_conf_t' -* Added 'enable_IPX' and 'network_number' to -* 'wan_device_t'. Also added defines for -* UDP PACKET TYPE, Interrupt test, critical values -* for RACE conditions. -* Oct 05, 1997 Jaspreet Singh Added 'dlci_num' and 'dlci[100]' to -* 'wan_fr_conf_t' to configure a list of dlci(s) -* for a NODE -* Jul 07, 1997 Jaspreet Singh Added 'ttl' to 'wandev_conf_t' & 'wan_device_t' -* May 29, 1997 Jaspreet Singh Added 'tx_int_enabled' to 'wan_device_t' -* May 21, 1997 Jaspreet Singh Added 'udp_port' to 'wan_device_t' -* Apr 25, 1997 Farhan Thawar Added 'udp_port' to 'wandev_conf_t' -* Jan 16, 1997 Gene Kozin router_devlist made public -* Jan 02, 1997 Gene Kozin Initial version (based on wanpipe.h). -*****************************************************************************/ - -#ifndef _UAPI_ROUTER_H -#define _UAPI_ROUTER_H - -#define ROUTER_NAME "wanrouter" /* in case we ever change it */ -#define ROUTER_VERSION 1 /* version number */ -#define ROUTER_RELEASE 1 /* release (minor version) number */ -#define ROUTER_IOCTL 'W' /* for IOCTL calls */ -#define ROUTER_MAGIC 0x524D4157L /* signature: 'WANR' reversed */ - -/* IOCTL codes for /proc/router/<device> entries (up to 255) */ -enum router_ioctls -{ - ROUTER_SETUP = ROUTER_IOCTL<<8, /* configure device */ - ROUTER_DOWN, /* shut down device */ - ROUTER_STAT, /* get device status */ - ROUTER_IFNEW, /* add interface */ - ROUTER_IFDEL, /* delete interface */ - ROUTER_IFSTAT, /* get interface status */ - ROUTER_USER = (ROUTER_IOCTL<<8)+16, /* driver-specific calls */ - ROUTER_USER_MAX = (ROUTER_IOCTL<<8)+31 -}; - -/* identifiers for displaying proc file data for dual port adapters */ -#define PROC_DATA_PORT_0 0x8000 /* the data is for port 0 */ -#define PROC_DATA_PORT_1 0x8001 /* the data is for port 1 */ - -/* NLPID for packet encapsulation (ISO/IEC TR 9577) */ -#define NLPID_IP 0xCC /* Internet Protocol Datagram */ -#define NLPID_SNAP 0x80 /* IEEE Subnetwork Access Protocol */ -#define NLPID_CLNP 0x81 /* ISO/IEC 8473 */ -#define NLPID_ESIS 0x82 /* ISO/IEC 9542 */ -#define NLPID_ISIS 0x83 /* ISO/IEC ISIS */ -#define NLPID_Q933 0x08 /* CCITT Q.933 */ - -/* Miscellaneous */ -#define WAN_IFNAME_SZ 15 /* max length of the interface name */ -#define WAN_DRVNAME_SZ 15 /* max length of the link driver name */ -#define WAN_ADDRESS_SZ 31 /* max length of the WAN media address */ -#define USED_BY_FIELD 8 /* max length of the used by field */ - -/* Defines for UDP PACKET TYPE */ -#define UDP_PTPIPE_TYPE 0x01 -#define UDP_FPIPE_TYPE 0x02 -#define UDP_CPIPE_TYPE 0x03 -#define UDP_DRVSTATS_TYPE 0x04 -#define UDP_INVALID_TYPE 0x05 - -/* Command return code */ -#define CMD_OK 0 /* normal firmware return code */ -#define CMD_TIMEOUT 0xFF /* firmware command timed out */ - -/* UDP Packet Management */ -#define UDP_PKT_FRM_STACK 0x00 -#define UDP_PKT_FRM_NETWORK 0x01 - -/* Maximum interrupt test counter */ -#define MAX_INTR_TEST_COUNTER 100 - -/* Critical Values for RACE conditions*/ -#define CRITICAL_IN_ISR 0xA1 -#define CRITICAL_INTR_HANDLED 0xB1 - -/****** Data Types **********************************************************/ - -/*---------------------------------------------------------------------------- - * X.25-specific link-level configuration. - */ -typedef struct wan_x25_conf -{ - unsigned lo_pvc; /* lowest permanent circuit number */ - unsigned hi_pvc; /* highest permanent circuit number */ - unsigned lo_svc; /* lowest switched circuit number */ - unsigned hi_svc; /* highest switched circuit number */ - unsigned hdlc_window; /* HDLC window size (1..7) */ - unsigned pkt_window; /* X.25 packet window size (1..7) */ - unsigned t1; /* HDLC timer T1, sec (1..30) */ - unsigned t2; /* HDLC timer T2, sec (0..29) */ - unsigned t4; /* HDLC supervisory frame timer = T4 * T1 */ - unsigned n2; /* HDLC retransmission limit (1..30) */ - unsigned t10_t20; /* X.25 RESTART timeout, sec (1..255) */ - unsigned t11_t21; /* X.25 CALL timeout, sec (1..255) */ - unsigned t12_t22; /* X.25 RESET timeout, sec (1..255) */ - unsigned t13_t23; /* X.25 CLEAR timeout, sec (1..255) */ - unsigned t16_t26; /* X.25 INTERRUPT timeout, sec (1..255) */ - unsigned t28; /* X.25 REGISTRATION timeout, sec (1..255) */ - unsigned r10_r20; /* RESTART retransmission limit (0..250) */ - unsigned r12_r22; /* RESET retransmission limit (0..250) */ - unsigned r13_r23; /* CLEAR retransmission limit (0..250) */ - unsigned ccitt_compat; /* compatibility mode: 1988/1984/1980 */ - unsigned x25_conf_opt; /* User defined x25 config optoins */ - unsigned char LAPB_hdlc_only; /* Run in HDLC only mode */ - unsigned char logging; /* Control connection logging */ - unsigned char oob_on_modem; /* Whether to send modem status to the user app */ -} wan_x25_conf_t; - -/*---------------------------------------------------------------------------- - * Frame relay specific link-level configuration. - */ -typedef struct wan_fr_conf -{ - unsigned signalling; /* local in-channel signalling type */ - unsigned t391; /* link integrity verification timer */ - unsigned t392; /* polling verification timer */ - unsigned n391; /* full status polling cycle counter */ - unsigned n392; /* error threshold counter */ - unsigned n393; /* monitored events counter */ - unsigned dlci_num; /* number of DLCs (access node) */ - unsigned dlci[100]; /* List of all DLCIs */ -} wan_fr_conf_t; - -/*---------------------------------------------------------------------------- - * PPP-specific link-level configuration. - */ -typedef struct wan_ppp_conf -{ - unsigned restart_tmr; /* restart timer */ - unsigned auth_rsrt_tmr; /* authentication timer */ - unsigned auth_wait_tmr; /* authentication timer */ - unsigned mdm_fail_tmr; /* modem failure timer */ - unsigned dtr_drop_tmr; /* DTR drop timer */ - unsigned connect_tmout; /* connection timeout */ - unsigned conf_retry; /* max. retry */ - unsigned term_retry; /* max. retry */ - unsigned fail_retry; /* max. retry */ - unsigned auth_retry; /* max. retry */ - unsigned auth_options; /* authentication opt. */ - unsigned ip_options; /* IP options */ - char authenticator; /* AUTHENTICATOR or not */ - char ip_mode; /* Static/Host/Peer */ -} wan_ppp_conf_t; - -/*---------------------------------------------------------------------------- - * CHDLC-specific link-level configuration. - */ -typedef struct wan_chdlc_conf -{ - unsigned char ignore_dcd; /* Protocol options: */ - unsigned char ignore_cts; /* Ignore these to determine */ - unsigned char ignore_keepalive; /* link status (Yes or No) */ - unsigned char hdlc_streaming; /* hdlc_streaming mode (Y/N) */ - unsigned char receive_only; /* no transmit buffering (Y/N) */ - unsigned keepalive_tx_tmr; /* transmit keepalive timer */ - unsigned keepalive_rx_tmr; /* receive keepalive timer */ - unsigned keepalive_err_margin; /* keepalive_error_tolerance */ - unsigned slarp_timer; /* SLARP request timer */ -} wan_chdlc_conf_t; - - -/*---------------------------------------------------------------------------- - * WAN device configuration. Passed to ROUTER_SETUP IOCTL. - */ -typedef struct wandev_conf -{ - unsigned magic; /* magic number (for verification) */ - unsigned config_id; /* configuration structure identifier */ - /****** hardware configuration ******/ - unsigned ioport; /* adapter I/O port base */ - unsigned long maddr; /* dual-port memory address */ - unsigned msize; /* dual-port memory size */ - int irq; /* interrupt request level */ - int dma; /* DMA request level */ - char S514_CPU_no[1]; /* S514 PCI adapter CPU number ('A' or 'B') */ - unsigned PCI_slot_no; /* S514 PCI adapter slot number */ - char auto_pci_cfg; /* S515 PCI automatic slot detection */ - char comm_port; /* Communication Port (PRI=0, SEC=1) */ - unsigned bps; /* data transfer rate */ - unsigned mtu; /* maximum transmit unit size */ - unsigned udp_port; /* UDP port for management */ - unsigned char ttl; /* Time To Live for UDP security */ - unsigned char ft1; /* FT1 Configurator Option */ - char interface; /* RS-232/V.35, etc. */ - char clocking; /* external/internal */ - char line_coding; /* NRZ/NRZI/FM0/FM1, etc. */ - char station; /* DTE/DCE, primary/secondary, etc. */ - char connection; /* permanent/switched/on-demand */ - char read_mode; /* read mode: Polling or interrupt */ - char receive_only; /* disable tx buffers */ - char tty; /* Create a fake tty device */ - unsigned tty_major; /* Major number for wanpipe tty device */ - unsigned tty_minor; /* Minor number for wanpipe tty device */ - unsigned tty_mode; /* TTY operation mode SYNC or ASYNC */ - char backup; /* Backup Mode */ - unsigned hw_opt[4]; /* other hardware options */ - unsigned reserved[4]; - /****** arbitrary data ***************/ - unsigned data_size; /* data buffer size */ - void* data; /* data buffer, e.g. firmware */ - union /****** protocol-specific ************/ - { - wan_x25_conf_t x25; /* X.25 configuration */ - wan_ppp_conf_t ppp; /* PPP configuration */ - wan_fr_conf_t fr; /* frame relay configuration */ - wan_chdlc_conf_t chdlc; /* Cisco HDLC configuration */ - } u; -} wandev_conf_t; - -/* 'config_id' definitions */ -#define WANCONFIG_X25 101 /* X.25 link */ -#define WANCONFIG_FR 102 /* frame relay link */ -#define WANCONFIG_PPP 103 /* synchronous PPP link */ -#define WANCONFIG_CHDLC 104 /* Cisco HDLC Link */ -#define WANCONFIG_BSC 105 /* BiSync Streaming */ -#define WANCONFIG_HDLC 106 /* HDLC Support */ -#define WANCONFIG_MPPP 107 /* Multi Port PPP over RAW CHDLC */ - /* - * Configuration options defines. + * wanrouter.h Legacy declarations kept around until X25 is removed */ -/* general options */ -#define WANOPT_OFF 0 -#define WANOPT_ON 1 -#define WANOPT_NO 0 -#define WANOPT_YES 1 - -/* intercace options */ -#define WANOPT_RS232 0 -#define WANOPT_V35 1 - -/* data encoding options */ -#define WANOPT_NRZ 0 -#define WANOPT_NRZI 1 -#define WANOPT_FM0 2 -#define WANOPT_FM1 3 - -/* link type options */ -#define WANOPT_POINTTOPOINT 0 /* RTS always active */ -#define WANOPT_MULTIDROP 1 /* RTS is active when transmitting */ - -/* clocking options */ -#define WANOPT_EXTERNAL 0 -#define WANOPT_INTERNAL 1 - -/* station options */ -#define WANOPT_DTE 0 -#define WANOPT_DCE 1 -#define WANOPT_CPE 0 -#define WANOPT_NODE 1 -#define WANOPT_SECONDARY 0 -#define WANOPT_PRIMARY 1 - -/* connection options */ -#define WANOPT_PERMANENT 0 /* DTR always active */ -#define WANOPT_SWITCHED 1 /* use DTR to setup link (dial-up) */ -#define WANOPT_ONDEMAND 2 /* activate DTR only before sending */ - -/* frame relay in-channel signalling */ -#define WANOPT_FR_ANSI 1 /* ANSI T1.617 Annex D */ -#define WANOPT_FR_Q933 2 /* ITU Q.933A */ -#define WANOPT_FR_LMI 3 /* LMI */ - -/* PPP IP Mode Options */ -#define WANOPT_PPP_STATIC 0 -#define WANOPT_PPP_HOST 1 -#define WANOPT_PPP_PEER 2 - -/* ASY Mode Options */ -#define WANOPT_ONE 1 -#define WANOPT_TWO 2 -#define WANOPT_ONE_AND_HALF 3 - -#define WANOPT_NONE 0 -#define WANOPT_ODD 1 -#define WANOPT_EVEN 2 - -/* CHDLC Protocol Options */ -/* DF Commented out for now. - -#define WANOPT_CHDLC_NO_DCD IGNORE_DCD_FOR_LINK_STAT -#define WANOPT_CHDLC_NO_CTS IGNORE_CTS_FOR_LINK_STAT -#define WANOPT_CHDLC_NO_KEEPALIVE IGNORE_KPALV_FOR_LINK_STAT -*/ - -/* Port options */ -#define WANOPT_PRI 0 -#define WANOPT_SEC 1 -/* read mode */ -#define WANOPT_INTR 0 -#define WANOPT_POLL 1 - -#define WANOPT_TTY_SYNC 0 -#define WANOPT_TTY_ASYNC 1 -/*---------------------------------------------------------------------------- - * WAN Link Status Info (for ROUTER_STAT IOCTL). - */ -typedef struct wandev_stat -{ - unsigned state; /* link state */ - unsigned ndev; /* number of configured interfaces */ - - /* link/interface configuration */ - unsigned connection; /* permanent/switched/on-demand */ - unsigned media_type; /* Frame relay/PPP/X.25/SDLC, etc. */ - unsigned mtu; /* max. transmit unit for this device */ - - /* physical level statistics */ - unsigned modem_status; /* modem status */ - unsigned rx_frames; /* received frames count */ - unsigned rx_overruns; /* receiver overrun error count */ - unsigned rx_crc_err; /* receive CRC error count */ - unsigned rx_aborts; /* received aborted frames count */ - unsigned rx_bad_length; /* unexpetedly long/short frames count */ - unsigned rx_dropped; /* frames discarded at device level */ - unsigned tx_frames; /* transmitted frames count */ - unsigned tx_underruns; /* aborted transmissions (underruns) count */ - unsigned tx_timeouts; /* transmission timeouts */ - unsigned tx_rejects; /* other transmit errors */ - - /* media level statistics */ - unsigned rx_bad_format; /* frames with invalid format */ - unsigned rx_bad_addr; /* frames with invalid media address */ - unsigned tx_retries; /* frames re-transmitted */ - unsigned reserved[16]; /* reserved for future use */ -} wandev_stat_t; +#ifndef _UAPI_ROUTER_H +#define _UAPI_ROUTER_H /* 'state' defines */ enum wan_states @@ -365,88 +11,7 @@ enum wan_states WAN_UNCONFIGURED, /* link/channel is not configured */ WAN_DISCONNECTED, /* link/channel is disconnected */ WAN_CONNECTING, /* connection is in progress */ - WAN_CONNECTED, /* link/channel is operational */ - WAN_LIMIT, /* for verification only */ - WAN_DUALPORT, /* for Dual Port cards */ - WAN_DISCONNECTING, - WAN_FT1_READY /* FT1 Configurator Ready */ + WAN_CONNECTED /* link/channel is operational */ }; -enum { - WAN_LOCAL_IP, - WAN_POINTOPOINT_IP, - WAN_NETMASK_IP, - WAN_BROADCAST_IP -}; - -/* 'modem_status' masks */ -#define WAN_MODEM_CTS 0x0001 /* CTS line active */ -#define WAN_MODEM_DCD 0x0002 /* DCD line active */ -#define WAN_MODEM_DTR 0x0010 /* DTR line active */ -#define WAN_MODEM_RTS 0x0020 /* RTS line active */ - -/*---------------------------------------------------------------------------- - * WAN interface (logical channel) configuration (for ROUTER_IFNEW IOCTL). - */ -typedef struct wanif_conf -{ - unsigned magic; /* magic number */ - unsigned config_id; /* configuration identifier */ - char name[WAN_IFNAME_SZ+1]; /* interface name, ASCIIZ */ - char addr[WAN_ADDRESS_SZ+1]; /* media address, ASCIIZ */ - char usedby[USED_BY_FIELD]; /* used by API or WANPIPE */ - unsigned idle_timeout; /* sec, before disconnecting */ - unsigned hold_timeout; /* sec, before re-connecting */ - unsigned cir; /* Committed Information Rate fwd,bwd*/ - unsigned bc; /* Committed Burst Size fwd, bwd */ - unsigned be; /* Excess Burst Size fwd, bwd */ - unsigned char enable_IPX; /* Enable or Disable IPX */ - unsigned char inarp; /* Send Inverse ARP requests Y/N */ - unsigned inarp_interval; /* sec, between InARP requests */ - unsigned long network_number; /* Network Number for IPX */ - char mc; /* Multicast on or off */ - char local_addr[WAN_ADDRESS_SZ+1];/* local media address, ASCIIZ */ - unsigned char port; /* board port */ - unsigned char protocol; /* prococol used in this channel (TCPOX25 or X25) */ - char pap; /* PAP enabled or disabled */ - char chap; /* CHAP enabled or disabled */ - unsigned char userid[511]; /* List of User Id */ - unsigned char passwd[511]; /* List of passwords */ - unsigned char sysname[31]; /* Name of the system */ - unsigned char ignore_dcd; /* Protocol options: */ - unsigned char ignore_cts; /* Ignore these to determine */ - unsigned char ignore_keepalive; /* link status (Yes or No) */ - unsigned char hdlc_streaming; /* Hdlc streaming mode (Y/N) */ - unsigned keepalive_tx_tmr; /* transmit keepalive timer */ - unsigned keepalive_rx_tmr; /* receive keepalive timer */ - unsigned keepalive_err_margin; /* keepalive_error_tolerance */ - unsigned slarp_timer; /* SLARP request timer */ - unsigned char ttl; /* Time To Live for UDP security */ - char interface; /* RS-232/V.35, etc. */ - char clocking; /* external/internal */ - unsigned bps; /* data transfer rate */ - unsigned mtu; /* maximum transmit unit size */ - unsigned char if_down; /* brind down interface when disconnected */ - unsigned char gateway; /* Is this interface a gateway */ - unsigned char true_if_encoding; /* Set the dev->type to true board protocol */ - - unsigned char asy_data_trans; /* async API options */ - unsigned char rts_hs_for_receive; /* async Protocol options */ - unsigned char xon_xoff_hs_for_receive; - unsigned char xon_xoff_hs_for_transmit; - unsigned char dcd_hs_for_transmit; - unsigned char cts_hs_for_transmit; - unsigned char async_mode; - unsigned tx_bits_per_char; - unsigned rx_bits_per_char; - unsigned stop_bits; - unsigned char parity; - unsigned break_timer; - unsigned inter_char_timer; - unsigned rx_complete_length; - unsigned xon_char; - unsigned xoff_char; - unsigned char receive_only; /* no transmit buffering (Y/N) */ -} wanif_conf_t; - #endif /* _UAPI_ROUTER_H */ diff --git a/include/uapi/linux/xattr.h b/include/uapi/linux/xattr.h index 26607bd965fa..e4629b93bdd6 100644 --- a/include/uapi/linux/xattr.h +++ b/include/uapi/linux/xattr.h @@ -15,19 +15,22 @@ /* Namespaces */ #define XATTR_OS2_PREFIX "os2." -#define XATTR_OS2_PREFIX_LEN (sizeof (XATTR_OS2_PREFIX) - 1) +#define XATTR_OS2_PREFIX_LEN (sizeof(XATTR_OS2_PREFIX) - 1) + +#define XATTR_MAC_OSX_PREFIX "osx." +#define XATTR_MAC_OSX_PREFIX_LEN (sizeof(XATTR_MAC_OSX_PREFIX) - 1) #define XATTR_SECURITY_PREFIX "security." -#define XATTR_SECURITY_PREFIX_LEN (sizeof (XATTR_SECURITY_PREFIX) - 1) +#define XATTR_SECURITY_PREFIX_LEN (sizeof(XATTR_SECURITY_PREFIX) - 1) #define XATTR_SYSTEM_PREFIX "system." -#define XATTR_SYSTEM_PREFIX_LEN (sizeof (XATTR_SYSTEM_PREFIX) - 1) +#define XATTR_SYSTEM_PREFIX_LEN (sizeof(XATTR_SYSTEM_PREFIX) - 1) #define XATTR_TRUSTED_PREFIX "trusted." -#define XATTR_TRUSTED_PREFIX_LEN (sizeof (XATTR_TRUSTED_PREFIX) - 1) +#define XATTR_TRUSTED_PREFIX_LEN (sizeof(XATTR_TRUSTED_PREFIX) - 1) #define XATTR_USER_PREFIX "user." -#define XATTR_USER_PREFIX_LEN (sizeof (XATTR_USER_PREFIX) - 1) +#define XATTR_USER_PREFIX_LEN (sizeof(XATTR_USER_PREFIX) - 1) /* Security namespace */ #define XATTR_EVM_SUFFIX "evm" |