diff options
Diffstat (limited to 'include/asm-ia64/sn/pic.h')
| -rw-r--r-- | include/asm-ia64/sn/pic.h | 261 |
1 files changed, 261 insertions, 0 deletions
diff --git a/include/asm-ia64/sn/pic.h b/include/asm-ia64/sn/pic.h new file mode 100644 index 000000000000..0de82e6b0893 --- /dev/null +++ b/include/asm-ia64/sn/pic.h @@ -0,0 +1,261 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 1992 - 1997, 2000-2003 Silicon Graphics, Inc. All rights reserved. + */ +#ifndef _ASM_IA64_SN_PCI_PIC_H +#define _ASM_IA64_SN_PCI_PIC_H + +/* + * PIC AS DEVICE ZERO + * ------------------ + * + * PIC handles PCI/X busses. PCI/X requires that the 'bridge' (i.e. PIC) + * be designated as 'device 0'. That is a departure from earlier SGI + * PCI bridges. Because of that we use config space 1 to access the + * config space of the first actual PCI device on the bus. + * Here's what the PIC manual says: + * + * The current PCI-X bus specification now defines that the parent + * hosts bus bridge (PIC for example) must be device 0 on bus 0. PIC + * reduced the total number of devices from 8 to 4 and removed the + * device registers and windows, now only supporting devices 0,1,2, and + * 3. PIC did leave all 8 configuration space windows. The reason was + * there was nothing to gain by removing them. Here in lies the problem. + * The device numbering we do using 0 through 3 is unrelated to the device + * numbering which PCI-X requires in configuration space. In the past we + * correlated Configs pace and our device space 0 <-> 0, 1 <-> 1, etc. + * PCI-X requires we start a 1, not 0 and currently the PX brick + * does associate our: + * + * device 0 with configuration space window 1, + * device 1 with configuration space window 2, + * device 2 with configuration space window 3, + * device 3 with configuration space window 4. + * + * The net effect is that all config space access are off-by-one with + * relation to other per-slot accesses on the PIC. + * Here is a table that shows some of that: + * + * Internal Slot# + * | + * | 0 1 2 3 + * ----------|--------------------------------------- + * config | 0x21000 0x22000 0x23000 0x24000 + * | + * even rrb | 0[0] n/a 1[0] n/a [] == implied even/odd + * | + * odd rrb | n/a 0[1] n/a 1[1] + * | + * int dev | 00 01 10 11 + * | + * ext slot# | 1 2 3 4 + * ----------|--------------------------------------- + */ + +#define PIC_ATE_TARGETID_SHFT 8 +#define PIC_HOST_INTR_ADDR 0x0000FFFFFFFFFFFFUL +#define PIC_PCI64_ATTR_TARG_SHFT 60 + + +/***************************************************************************** + *********************** PIC MMR structure mapping *************************** + *****************************************************************************/ + +/* NOTE: PIC WAR. PV#854697. PIC does not allow writes just to [31:0] + * of a 64-bit register. When writing PIC registers, always write the + * entire 64 bits. + */ + +struct pic { + + /* 0x000000-0x00FFFF -- Local Registers */ + + /* 0x000000-0x000057 -- Standard Widget Configuration */ + uint64_t p_wid_id; /* 0x000000 */ + uint64_t p_wid_stat; /* 0x000008 */ + uint64_t p_wid_err_upper; /* 0x000010 */ + uint64_t p_wid_err_lower; /* 0x000018 */ + #define p_wid_err p_wid_err_lower + uint64_t p_wid_control; /* 0x000020 */ + uint64_t p_wid_req_timeout; /* 0x000028 */ + uint64_t p_wid_int_upper; /* 0x000030 */ + uint64_t p_wid_int_lower; /* 0x000038 */ + #define p_wid_int p_wid_int_lower + uint64_t p_wid_err_cmdword; /* 0x000040 */ + uint64_t p_wid_llp; /* 0x000048 */ + uint64_t p_wid_tflush; /* 0x000050 */ + + /* 0x000058-0x00007F -- Bridge-specific Widget Configuration */ + uint64_t p_wid_aux_err; /* 0x000058 */ + uint64_t p_wid_resp_upper; /* 0x000060 */ + uint64_t p_wid_resp_lower; /* 0x000068 */ + #define p_wid_resp p_wid_resp_lower + uint64_t p_wid_tst_pin_ctrl; /* 0x000070 */ + uint64_t p_wid_addr_lkerr; /* 0x000078 */ + + /* 0x000080-0x00008F -- PMU & MAP */ + uint64_t p_dir_map; /* 0x000080 */ + uint64_t _pad_000088; /* 0x000088 */ + + /* 0x000090-0x00009F -- SSRAM */ + uint64_t p_map_fault; /* 0x000090 */ + uint64_t _pad_000098; /* 0x000098 */ + + /* 0x0000A0-0x0000AF -- Arbitration */ + uint64_t p_arb; /* 0x0000A0 */ + uint64_t _pad_0000A8; /* 0x0000A8 */ + + /* 0x0000B0-0x0000BF -- Number In A Can or ATE Parity Error */ + uint64_t p_ate_parity_err; /* 0x0000B0 */ + uint64_t _pad_0000B8; /* 0x0000B8 */ + + /* 0x0000C0-0x0000FF -- PCI/GIO */ + uint64_t p_bus_timeout; /* 0x0000C0 */ + uint64_t p_pci_cfg; /* 0x0000C8 */ + uint64_t p_pci_err_upper; /* 0x0000D0 */ + uint64_t p_pci_err_lower; /* 0x0000D8 */ + #define p_pci_err p_pci_err_lower + uint64_t _pad_0000E0[4]; /* 0x0000{E0..F8} */ + + /* 0x000100-0x0001FF -- Interrupt */ + uint64_t p_int_status; /* 0x000100 */ + uint64_t p_int_enable; /* 0x000108 */ + uint64_t p_int_rst_stat; /* 0x000110 */ + uint64_t p_int_mode; /* 0x000118 */ + uint64_t p_int_device; /* 0x000120 */ + uint64_t p_int_host_err; /* 0x000128 */ + uint64_t p_int_addr[8]; /* 0x0001{30,,,68} */ + uint64_t p_err_int_view; /* 0x000170 */ + uint64_t p_mult_int; /* 0x000178 */ + uint64_t p_force_always[8]; /* 0x0001{80,,,B8} */ + uint64_t p_force_pin[8]; /* 0x0001{C0,,,F8} */ + + /* 0x000200-0x000298 -- Device */ + uint64_t p_device[4]; /* 0x0002{00,,,18} */ + uint64_t _pad_000220[4]; /* 0x0002{20,,,38} */ + uint64_t p_wr_req_buf[4]; /* 0x0002{40,,,58} */ + uint64_t _pad_000260[4]; /* 0x0002{60,,,78} */ + uint64_t p_rrb_map[2]; /* 0x0002{80,,,88} */ + #define p_even_resp p_rrb_map[0] /* 0x000280 */ + #define p_odd_resp p_rrb_map[1] /* 0x000288 */ + uint64_t p_resp_status; /* 0x000290 */ + uint64_t p_resp_clear; /* 0x000298 */ + + uint64_t _pad_0002A0[12]; /* 0x0002{A0..F8} */ + + /* 0x000300-0x0003F8 -- Buffer Address Match Registers */ + struct { + uint64_t upper; /* 0x0003{00,,,F0} */ + uint64_t lower; /* 0x0003{08,,,F8} */ + } p_buf_addr_match[16]; + + /* 0x000400-0x0005FF -- Performance Monitor Registers (even only) */ + struct { + uint64_t flush_w_touch; /* 0x000{400,,,5C0} */ + uint64_t flush_wo_touch; /* 0x000{408,,,5C8} */ + uint64_t inflight; /* 0x000{410,,,5D0} */ + uint64_t prefetch; /* 0x000{418,,,5D8} */ + uint64_t total_pci_retry; /* 0x000{420,,,5E0} */ + uint64_t max_pci_retry; /* 0x000{428,,,5E8} */ + uint64_t max_latency; /* 0x000{430,,,5F0} */ + uint64_t clear_all; /* 0x000{438,,,5F8} */ + } p_buf_count[8]; + + + /* 0x000600-0x0009FF -- PCI/X registers */ + uint64_t p_pcix_bus_err_addr; /* 0x000600 */ + uint64_t p_pcix_bus_err_attr; /* 0x000608 */ + uint64_t p_pcix_bus_err_data; /* 0x000610 */ + uint64_t p_pcix_pio_split_addr; /* 0x000618 */ + uint64_t p_pcix_pio_split_attr; /* 0x000620 */ + uint64_t p_pcix_dma_req_err_attr; /* 0x000628 */ + uint64_t p_pcix_dma_req_err_addr; /* 0x000630 */ + uint64_t p_pcix_timeout; /* 0x000638 */ + + uint64_t _pad_000640[120]; /* 0x000{640,,,9F8} */ + + /* 0x000A00-0x000BFF -- PCI/X Read&Write Buffer */ + struct { + uint64_t p_buf_addr; /* 0x000{A00,,,AF0} */ + uint64_t p_buf_attr; /* 0X000{A08,,,AF8} */ + } p_pcix_read_buf_64[16]; + + struct { + uint64_t p_buf_addr; /* 0x000{B00,,,BE0} */ + uint64_t p_buf_attr; /* 0x000{B08,,,BE8} */ + uint64_t p_buf_valid; /* 0x000{B10,,,BF0} */ + uint64_t __pad1; /* 0x000{B18,,,BF8} */ + } p_pcix_write_buf_64[8]; + + /* End of Local Registers -- Start of Address Map space */ + + char _pad_000c00[0x010000 - 0x000c00]; + + /* 0x010000-0x011fff -- Internal ATE RAM (Auto Parity Generation) */ + uint64_t p_int_ate_ram[1024]; /* 0x010000-0x011fff */ + + /* 0x012000-0x013fff -- Internal ATE RAM (Manual Parity Generation) */ + uint64_t p_int_ate_ram_mp[1024]; /* 0x012000-0x013fff */ + + char _pad_014000[0x18000 - 0x014000]; + + /* 0x18000-0x197F8 -- PIC Write Request Ram */ + uint64_t p_wr_req_lower[256]; /* 0x18000 - 0x187F8 */ + uint64_t p_wr_req_upper[256]; /* 0x18800 - 0x18FF8 */ + uint64_t p_wr_req_parity[256]; /* 0x19000 - 0x197F8 */ + + char _pad_019800[0x20000 - 0x019800]; + + /* 0x020000-0x027FFF -- PCI Device Configuration Spaces */ + union { + uint8_t c[0x1000 / 1]; /* 0x02{0000,,,7FFF} */ + uint16_t s[0x1000 / 2]; /* 0x02{0000,,,7FFF} */ + uint32_t l[0x1000 / 4]; /* 0x02{0000,,,7FFF} */ + uint64_t d[0x1000 / 8]; /* 0x02{0000,,,7FFF} */ + union { + uint8_t c[0x100 / 1]; + uint16_t s[0x100 / 2]; + uint32_t l[0x100 / 4]; + uint64_t d[0x100 / 8]; + } f[8]; + } p_type0_cfg_dev[8]; /* 0x02{0000,,,7FFF} */ + + /* 0x028000-0x028FFF -- PCI Type 1 Configuration Space */ + union { + uint8_t c[0x1000 / 1]; /* 0x028000-0x029000 */ + uint16_t s[0x1000 / 2]; /* 0x028000-0x029000 */ + uint32_t l[0x1000 / 4]; /* 0x028000-0x029000 */ + uint64_t d[0x1000 / 8]; /* 0x028000-0x029000 */ + union { + uint8_t c[0x100 / 1]; + uint16_t s[0x100 / 2]; + uint32_t l[0x100 / 4]; + uint64_t d[0x100 / 8]; + } f[8]; + } p_type1_cfg; /* 0x028000-0x029000 */ + + char _pad_029000[0x030000-0x029000]; + + /* 0x030000-0x030007 -- PCI Interrupt Acknowledge Cycle */ + union { + uint8_t c[8 / 1]; + uint16_t s[8 / 2]; + uint32_t l[8 / 4]; + uint64_t d[8 / 8]; + } p_pci_iack; /* 0x030000-0x030007 */ + + char _pad_030007[0x040000-0x030008]; + + /* 0x040000-0x030007 -- PCIX Special Cycle */ + union { + uint8_t c[8 / 1]; + uint16_t s[8 / 2]; + uint32_t l[8 / 4]; + uint64_t d[8 / 8]; + } p_pcix_cycle; /* 0x040000-0x040007 */ +}; + +#endif /* _ASM_IA64_SN_PCI_PIC_H */ |