diff options
Diffstat (limited to 'drivers')
| -rw-r--r-- | drivers/mmc/core/Kconfig | 10 | ||||
| -rw-r--r-- | drivers/mmc/core/core.c | 139 | ||||
| -rw-r--r-- | drivers/mmc/core/core.h | 3 | ||||
| -rw-r--r-- | drivers/mmc/core/debugfs.c | 5 | ||||
| -rw-r--r-- | drivers/mmc/core/host.c | 245 | ||||
| -rw-r--r-- | drivers/mmc/core/mmc.c | 2 | ||||
| -rw-r--r-- | drivers/mmc/core/quirks.c | 18 | ||||
| -rw-r--r-- | drivers/mmc/core/sd.c | 2 | ||||
| -rw-r--r-- | drivers/mmc/core/sdio.c | 7 | ||||
| -rw-r--r-- | drivers/mmc/core/sdio_irq.c | 14 |
10 files changed, 19 insertions, 426 deletions
diff --git a/drivers/mmc/core/Kconfig b/drivers/mmc/core/Kconfig index 9ebee72d9c3f..4c33d7690f2f 100644 --- a/drivers/mmc/core/Kconfig +++ b/drivers/mmc/core/Kconfig @@ -1,13 +1,3 @@ # # MMC core configuration # - -config MMC_CLKGATE - bool "MMC host clock gating" - help - This will attempt to aggressively gate the clock to the MMC card. - This is done to save power due to gating off the logic and bus - noise when the MMC card is not in use. Your host driver has to - support handling this in order for it to be of any use. - - If unsure, say N. diff --git a/drivers/mmc/core/core.c b/drivers/mmc/core/core.c index 21cda23b247c..1a36b021b44e 100644 --- a/drivers/mmc/core/core.c +++ b/drivers/mmc/core/core.c @@ -187,8 +187,6 @@ void mmc_request_done(struct mmc_host *host, struct mmc_request *mrq) if (mrq->done) mrq->done(mrq); - - mmc_host_clk_release(host); } } @@ -292,7 +290,6 @@ static int mmc_start_request(struct mmc_host *host, struct mmc_request *mrq) mrq->stop->mrq = mrq; } } - mmc_host_clk_hold(host); led_trigger_event(host->led, LED_FULL); __mmc_start_request(host, mrq); @@ -542,11 +539,8 @@ static void mmc_wait_for_req_done(struct mmc_host *host, static void mmc_pre_req(struct mmc_host *host, struct mmc_request *mrq, bool is_first_req) { - if (host->ops->pre_req) { - mmc_host_clk_hold(host); + if (host->ops->pre_req) host->ops->pre_req(host, mrq, is_first_req); - mmc_host_clk_release(host); - } } /** @@ -561,11 +555,8 @@ static void mmc_pre_req(struct mmc_host *host, struct mmc_request *mrq, static void mmc_post_req(struct mmc_host *host, struct mmc_request *mrq, int err) { - if (host->ops->post_req) { - mmc_host_clk_hold(host); + if (host->ops->post_req) host->ops->post_req(host, mrq, err); - mmc_host_clk_release(host); - } } /** @@ -850,9 +841,9 @@ void mmc_set_data_timeout(struct mmc_data *data, const struct mmc_card *card) unsigned int timeout_us, limit_us; timeout_us = data->timeout_ns / 1000; - if (mmc_host_clk_rate(card->host)) + if (card->host->ios.clock) timeout_us += data->timeout_clks * 1000 / - (mmc_host_clk_rate(card->host) / 1000); + (card->host->ios.clock / 1000); if (data->flags & MMC_DATA_WRITE) /* @@ -1050,8 +1041,6 @@ static inline void mmc_set_ios(struct mmc_host *host) ios->power_mode, ios->chip_select, ios->vdd, ios->bus_width, ios->timing); - if (ios->clock > 0) - mmc_set_ungated(host); host->ops->set_ios(host, ios); } @@ -1060,17 +1049,15 @@ static inline void mmc_set_ios(struct mmc_host *host) */ void mmc_set_chip_select(struct mmc_host *host, int mode) { - mmc_host_clk_hold(host); host->ios.chip_select = mode; mmc_set_ios(host); - mmc_host_clk_release(host); } /* * Sets the host clock to the highest possible frequency that * is below "hz". */ -static void __mmc_set_clock(struct mmc_host *host, unsigned int hz) +void mmc_set_clock(struct mmc_host *host, unsigned int hz) { WARN_ON(hz && hz < host->f_min); @@ -1081,68 +1068,6 @@ static void __mmc_set_clock(struct mmc_host *host, unsigned int hz) mmc_set_ios(host); } -void mmc_set_clock(struct mmc_host *host, unsigned int hz) -{ - mmc_host_clk_hold(host); - __mmc_set_clock(host, hz); - mmc_host_clk_release(host); -} - -#ifdef CONFIG_MMC_CLKGATE -/* - * This gates the clock by setting it to 0 Hz. - */ -void mmc_gate_clock(struct mmc_host *host) -{ - unsigned long flags; - - spin_lock_irqsave(&host->clk_lock, flags); - host->clk_old = host->ios.clock; - host->ios.clock = 0; - host->clk_gated = true; - spin_unlock_irqrestore(&host->clk_lock, flags); - mmc_set_ios(host); -} - -/* - * This restores the clock from gating by using the cached - * clock value. - */ -void mmc_ungate_clock(struct mmc_host *host) -{ - /* - * We should previously have gated the clock, so the clock shall - * be 0 here! The clock may however be 0 during initialization, - * when some request operations are performed before setting - * the frequency. When ungate is requested in that situation - * we just ignore the call. - */ - if (host->clk_old) { - BUG_ON(host->ios.clock); - /* This call will also set host->clk_gated to false */ - __mmc_set_clock(host, host->clk_old); - } -} - -void mmc_set_ungated(struct mmc_host *host) -{ - unsigned long flags; - - /* - * We've been given a new frequency while the clock is gated, - * so make sure we regard this as ungating it. - */ - spin_lock_irqsave(&host->clk_lock, flags); - host->clk_gated = false; - spin_unlock_irqrestore(&host->clk_lock, flags); -} - -#else -void mmc_set_ungated(struct mmc_host *host) -{ -} -#endif - int mmc_execute_tuning(struct mmc_card *card) { struct mmc_host *host = card->host; @@ -1157,9 +1082,7 @@ int mmc_execute_tuning(struct mmc_card *card) else opcode = MMC_SEND_TUNING_BLOCK; - mmc_host_clk_hold(host); err = host->ops->execute_tuning(host, opcode); - mmc_host_clk_release(host); if (err) pr_err("%s: tuning execution failed\n", mmc_hostname(host)); @@ -1174,10 +1097,8 @@ int mmc_execute_tuning(struct mmc_card *card) */ void mmc_set_bus_mode(struct mmc_host *host, unsigned int mode) { - mmc_host_clk_hold(host); host->ios.bus_mode = mode; mmc_set_ios(host); - mmc_host_clk_release(host); } /* @@ -1185,10 +1106,8 @@ void mmc_set_bus_mode(struct mmc_host *host, unsigned int mode) */ void mmc_set_bus_width(struct mmc_host *host, unsigned int width) { - mmc_host_clk_hold(host); host->ios.bus_width = width; mmc_set_ios(host); - mmc_host_clk_release(host); } /* @@ -1532,11 +1451,8 @@ int __mmc_set_signal_voltage(struct mmc_host *host, int signal_voltage) int old_signal_voltage = host->ios.signal_voltage; host->ios.signal_voltage = signal_voltage; - if (host->ops->start_signal_voltage_switch) { - mmc_host_clk_hold(host); + if (host->ops->start_signal_voltage_switch) err = host->ops->start_signal_voltage_switch(host, &host->ios); - mmc_host_clk_release(host); - } if (err) host->ios.signal_voltage = old_signal_voltage; @@ -1570,20 +1486,17 @@ int mmc_set_signal_voltage(struct mmc_host *host, int signal_voltage, u32 ocr) pr_warn("%s: cannot verify signal voltage switch\n", mmc_hostname(host)); - mmc_host_clk_hold(host); - cmd.opcode = SD_SWITCH_VOLTAGE; cmd.arg = 0; cmd.flags = MMC_RSP_R1 | MMC_CMD_AC; err = mmc_wait_for_cmd(host, &cmd, 0); if (err) - goto err_command; + return err; + + if (!mmc_host_is_spi(host) && (cmd.resp[0] & R1_ERROR)) + return -EIO; - if (!mmc_host_is_spi(host) && (cmd.resp[0] & R1_ERROR)) { - err = -EIO; - goto err_command; - } /* * The card should drive cmd and dat[0:3] low immediately * after the response of cmd11, but wait 1 ms to be sure @@ -1632,9 +1545,6 @@ power_cycle: mmc_power_cycle(host, ocr); } -err_command: - mmc_host_clk_release(host); - return err; } @@ -1643,10 +1553,8 @@ err_command: */ void mmc_set_timing(struct mmc_host *host, unsigned int timing) { - mmc_host_clk_hold(host); host->ios.timing = timing; mmc_set_ios(host); - mmc_host_clk_release(host); } /* @@ -1654,10 +1562,8 @@ void mmc_set_timing(struct mmc_host *host, unsigned int timing) */ void mmc_set_driver_type(struct mmc_host *host, unsigned int drv_type) { - mmc_host_clk_hold(host); host->ios.drv_type = drv_type; mmc_set_ios(host); - mmc_host_clk_release(host); } int mmc_select_drive_strength(struct mmc_card *card, unsigned int max_dtr, @@ -1665,7 +1571,6 @@ int mmc_select_drive_strength(struct mmc_card *card, unsigned int max_dtr, { struct mmc_host *host = card->host; int host_drv_type = SD_DRIVER_TYPE_B; - int drive_strength; *drv_type = 0; @@ -1688,14 +1593,10 @@ int mmc_select_drive_strength(struct mmc_card *card, unsigned int max_dtr, * information and let the hardware specific code * return what is possible given the options */ - mmc_host_clk_hold(host); - drive_strength = host->ops->select_drive_strength(card, max_dtr, - host_drv_type, - card_drv_type, - drv_type); - mmc_host_clk_release(host); - - return drive_strength; + return host->ops->select_drive_strength(card, max_dtr, + host_drv_type, + card_drv_type, + drv_type); } /* @@ -1714,8 +1615,6 @@ void mmc_power_up(struct mmc_host *host, u32 ocr) if (host->ios.power_mode == MMC_POWER_ON) return; - mmc_host_clk_hold(host); - mmc_pwrseq_pre_power_on(host); host->ios.vdd = fls(ocr) - 1; @@ -1749,8 +1648,6 @@ void mmc_power_up(struct mmc_host *host, u32 ocr) * time required to reach a stable voltage. */ mmc_delay(10); - - mmc_host_clk_release(host); } void mmc_power_off(struct mmc_host *host) @@ -1758,8 +1655,6 @@ void mmc_power_off(struct mmc_host *host) if (host->ios.power_mode == MMC_POWER_OFF) return; - mmc_host_clk_hold(host); - mmc_pwrseq_power_off(host); host->ios.clock = 0; @@ -1775,8 +1670,6 @@ void mmc_power_off(struct mmc_host *host) * can be successfully turned on again. */ mmc_delay(1); - - mmc_host_clk_release(host); } void mmc_power_cycle(struct mmc_host *host, u32 ocr) @@ -1992,7 +1885,7 @@ static unsigned int mmc_mmc_erase_timeout(struct mmc_card *card, */ timeout_clks <<= 1; timeout_us += (timeout_clks * 1000) / - (mmc_host_clk_rate(card->host) / 1000); + (card->host->ios.clock / 1000); erase_timeout = timeout_us / 1000; @@ -2440,9 +2333,7 @@ static void mmc_hw_reset_for_init(struct mmc_host *host) { if (!(host->caps & MMC_CAP_HW_RESET) || !host->ops->hw_reset) return; - mmc_host_clk_hold(host); host->ops->hw_reset(host); - mmc_host_clk_release(host); } int mmc_hw_reset(struct mmc_host *host) diff --git a/drivers/mmc/core/core.h b/drivers/mmc/core/core.h index 1a22a82209b2..09241e56d628 100644 --- a/drivers/mmc/core/core.h +++ b/drivers/mmc/core/core.h @@ -40,9 +40,6 @@ void mmc_init_erase(struct mmc_card *card); void mmc_set_chip_select(struct mmc_host *host, int mode); void mmc_set_clock(struct mmc_host *host, unsigned int hz); -void mmc_gate_clock(struct mmc_host *host); -void mmc_ungate_clock(struct mmc_host *host); -void mmc_set_ungated(struct mmc_host *host); void mmc_set_bus_mode(struct mmc_host *host, unsigned int mode); void mmc_set_bus_width(struct mmc_host *host, unsigned int width); u32 mmc_select_voltage(struct mmc_host *host, u32 ocr); diff --git a/drivers/mmc/core/debugfs.c b/drivers/mmc/core/debugfs.c index f4db93e03e88..154aced0b91b 100644 --- a/drivers/mmc/core/debugfs.c +++ b/drivers/mmc/core/debugfs.c @@ -255,11 +255,6 @@ void mmc_add_host_debugfs(struct mmc_host *host) &mmc_clock_fops)) goto err_node; -#ifdef CONFIG_MMC_CLKGATE - if (!debugfs_create_u32("clk_delay", (S_IRUSR | S_IWUSR), - root, &host->clk_delay)) - goto err_node; -#endif #ifdef CONFIG_FAIL_MMC_REQUEST if (fail_request) setup_fault_attr(&fail_default_attr, fail_request); diff --git a/drivers/mmc/core/host.c b/drivers/mmc/core/host.c index 5466f25f0281..970e6906930b 100644 --- a/drivers/mmc/core/host.c +++ b/drivers/mmc/core/host.c @@ -61,246 +61,6 @@ void mmc_unregister_host_class(void) class_unregister(&mmc_host_class); } -#ifdef CONFIG_MMC_CLKGATE -static ssize_t clkgate_delay_show(struct device *dev, - struct device_attribute *attr, char *buf) -{ - struct mmc_host *host = cls_dev_to_mmc_host(dev); - return snprintf(buf, PAGE_SIZE, "%lu\n", host->clkgate_delay); -} - -static ssize_t clkgate_delay_store(struct device *dev, - struct device_attribute *attr, const char *buf, size_t count) -{ - struct mmc_host *host = cls_dev_to_mmc_host(dev); - unsigned long flags, value; - - if (kstrtoul(buf, 0, &value)) - return -EINVAL; - - spin_lock_irqsave(&host->clk_lock, flags); - host->clkgate_delay = value; - spin_unlock_irqrestore(&host->clk_lock, flags); - return count; -} - -/* - * Enabling clock gating will make the core call out to the host - * once up and once down when it performs a request or card operation - * intermingled in any fashion. The driver will see this through - * set_ios() operations with ios.clock field set to 0 to gate (disable) - * the block clock, and to the old frequency to enable it again. - */ -static void mmc_host_clk_gate_delayed(struct mmc_host *host) -{ - unsigned long tick_ns; - unsigned long freq = host->ios.clock; - unsigned long flags; - - if (!freq) { - pr_debug("%s: frequency set to 0 in disable function, " - "this means the clock is already disabled.\n", - mmc_hostname(host)); - return; - } - /* - * New requests may have appeared while we were scheduling, - * then there is no reason to delay the check before - * clk_disable(). - */ - spin_lock_irqsave(&host->clk_lock, flags); - - /* - * Delay n bus cycles (at least 8 from MMC spec) before attempting - * to disable the MCI block clock. The reference count may have - * gone up again after this delay due to rescheduling! - */ - if (!host->clk_requests) { - spin_unlock_irqrestore(&host->clk_lock, flags); - tick_ns = DIV_ROUND_UP(1000000000, freq); - ndelay(host->clk_delay * tick_ns); - } else { - /* New users appeared while waiting for this work */ - spin_unlock_irqrestore(&host->clk_lock, flags); - return; - } - mutex_lock(&host->clk_gate_mutex); - spin_lock_irqsave(&host->clk_lock, flags); - if (!host->clk_requests) { - spin_unlock_irqrestore(&host->clk_lock, flags); - /* This will set host->ios.clock to 0 */ - mmc_gate_clock(host); - spin_lock_irqsave(&host->clk_lock, flags); - pr_debug("%s: gated MCI clock\n", mmc_hostname(host)); - } - spin_unlock_irqrestore(&host->clk_lock, flags); - mutex_unlock(&host->clk_gate_mutex); -} - -/* - * Internal work. Work to disable the clock at some later point. - */ -static void mmc_host_clk_gate_work(struct work_struct *work) -{ - struct mmc_host *host = container_of(work, struct mmc_host, - clk_gate_work.work); - - mmc_host_clk_gate_delayed(host); -} - -/** - * mmc_host_clk_hold - ungate hardware MCI clocks - * @host: host to ungate. - * - * Makes sure the host ios.clock is restored to a non-zero value - * past this call. Increase clock reference count and ungate clock - * if we're the first user. - */ -void mmc_host_clk_hold(struct mmc_host *host) -{ - unsigned long flags; - - /* cancel any clock gating work scheduled by mmc_host_clk_release() */ - cancel_delayed_work_sync(&host->clk_gate_work); - mutex_lock(&host->clk_gate_mutex); - spin_lock_irqsave(&host->clk_lock, flags); - if (host->clk_gated) { - spin_unlock_irqrestore(&host->clk_lock, flags); - mmc_ungate_clock(host); - spin_lock_irqsave(&host->clk_lock, flags); - pr_debug("%s: ungated MCI clock\n", mmc_hostname(host)); - } - host->clk_requests++; - spin_unlock_irqrestore(&host->clk_lock, flags); - mutex_unlock(&host->clk_gate_mutex); -} - -/** - * mmc_host_may_gate_card - check if this card may be gated - * @card: card to check. - */ -static bool mmc_host_may_gate_card(struct mmc_card *card) -{ - /* If there is no card we may gate it */ - if (!card) - return true; - /* - * Don't gate SDIO cards! These need to be clocked at all times - * since they may be independent systems generating interrupts - * and other events. The clock requests counter from the core will - * go down to zero since the core does not need it, but we will not - * gate the clock, because there is somebody out there that may still - * be using it. - */ - return !(card->quirks & MMC_QUIRK_BROKEN_CLK_GATING); -} - -/** - * mmc_host_clk_release - gate off hardware MCI clocks - * @host: host to gate. - * - * Calls the host driver with ios.clock set to zero as often as possible - * in order to gate off hardware MCI clocks. Decrease clock reference - * count and schedule disabling of clock. - */ -void mmc_host_clk_release(struct mmc_host *host) -{ - unsigned long flags; - - spin_lock_irqsave(&host->clk_lock, flags); - host->clk_requests--; - if (mmc_host_may_gate_card(host->card) && - !host->clk_requests) - schedule_delayed_work(&host->clk_gate_work, - msecs_to_jiffies(host->clkgate_delay)); - spin_unlock_irqrestore(&host->clk_lock, flags); -} - -/** - * mmc_host_clk_rate - get current clock frequency setting - * @host: host to get the clock frequency for. - * - * Returns current clock frequency regardless of gating. - */ -unsigned int mmc_host_clk_rate(struct mmc_host *host) -{ - unsigned long freq; - unsigned long flags; - - spin_lock_irqsave(&host->clk_lock, flags); - if (host->clk_gated) - freq = host->clk_old; - else - freq = host->ios.clock; - spin_unlock_irqrestore(&host->clk_lock, flags); - return freq; -} - -/** - * mmc_host_clk_init - set up clock gating code - * @host: host with potential clock to control - */ -static inline void mmc_host_clk_init(struct mmc_host *host) -{ - host->clk_requests = 0; - /* Hold MCI clock for 8 cycles by default */ - host->clk_delay = 8; - /* - * Default clock gating delay is 0ms to avoid wasting power. - * This value can be tuned by writing into sysfs entry. - */ - host->clkgate_delay = 0; - host->clk_gated = false; - INIT_DELAYED_WORK(&host->clk_gate_work, mmc_host_clk_gate_work); - spin_lock_init(&host->clk_lock); - mutex_init(&host->clk_gate_mutex); -} - -/** - * mmc_host_clk_exit - shut down clock gating code - * @host: host with potential clock to control - */ -static inline void mmc_host_clk_exit(struct mmc_host *host) -{ - /* - * Wait for any outstanding gate and then make sure we're - * ungated before exiting. - */ - if (cancel_delayed_work_sync(&host->clk_gate_work)) - mmc_host_clk_gate_delayed(host); - if (host->clk_gated) - mmc_host_clk_hold(host); - /* There should be only one user now */ - WARN_ON(host->clk_requests > 1); -} - -static inline void mmc_host_clk_sysfs_init(struct mmc_host *host) -{ - host->clkgate_delay_attr.show = clkgate_delay_show; - host->clkgate_delay_attr.store = clkgate_delay_store; - sysfs_attr_init(&host->clkgate_delay_attr.attr); - host->clkgate_delay_attr.attr.name = "clkgate_delay"; - host->clkgate_delay_attr.attr.mode = S_IRUGO | S_IWUSR; - if (device_create_file(&host->class_dev, &host->clkgate_delay_attr)) - pr_err("%s: Failed to create clkgate_delay sysfs entry\n", - mmc_hostname(host)); -} -#else - -static inline void mmc_host_clk_init(struct mmc_host *host) -{ -} - -static inline void mmc_host_clk_exit(struct mmc_host *host) -{ -} - -static inline void mmc_host_clk_sysfs_init(struct mmc_host *host) -{ -} - -#endif - void mmc_retune_enable(struct mmc_host *host) { host->can_retune = 1; @@ -583,8 +343,6 @@ struct mmc_host *mmc_alloc_host(int extra, struct device *dev) return NULL; } - mmc_host_clk_init(host); - spin_lock_init(&host->lock); init_waitqueue_head(&host->wq); INIT_DELAYED_WORK(&host->detect, mmc_rescan); @@ -633,7 +391,6 @@ int mmc_add_host(struct mmc_host *host) #ifdef CONFIG_DEBUG_FS mmc_add_host_debugfs(host); #endif - mmc_host_clk_sysfs_init(host); mmc_start_host(host); register_pm_notifier(&host->pm_notify); @@ -663,8 +420,6 @@ void mmc_remove_host(struct mmc_host *host) device_del(&host->class_dev); led_trigger_unregister_simple(host->led); - - mmc_host_clk_exit(host); } EXPORT_SYMBOL(mmc_remove_host); diff --git a/drivers/mmc/core/mmc.c b/drivers/mmc/core/mmc.c index f6cd995dbe92..479b84a00bd7 100644 --- a/drivers/mmc/core/mmc.c +++ b/drivers/mmc/core/mmc.c @@ -1931,14 +1931,12 @@ static int mmc_reset(struct mmc_host *host) if (!mmc_can_reset(card)) return -EOPNOTSUPP; - mmc_host_clk_hold(host); mmc_set_clock(host, host->f_init); host->ops->hw_reset(host); /* Set initial state and call mmc_set_ios */ mmc_set_initial_state(host); - mmc_host_clk_release(host); return mmc_init_card(host, card->ocr, card); } diff --git a/drivers/mmc/core/quirks.c b/drivers/mmc/core/quirks.c index dd1d1e0fe322..fad660b95809 100644 --- a/drivers/mmc/core/quirks.c +++ b/drivers/mmc/core/quirks.c @@ -35,25 +35,7 @@ #define SDIO_DEVICE_ID_MARVELL_8797_F0 0x9128 #endif -/* - * This hook just adds a quirk for all sdio devices - */ -static void add_quirk_for_sdio_devices(struct mmc_card *card, int data) -{ - if (mmc_card_sdio(card)) - card->quirks |= data; -} - static const struct mmc_fixup mmc_fixup_methods[] = { - /* by default sdio devices are considered CLK_GATING broken */ - /* good cards will be whitelisted as they are tested */ - SDIO_FIXUP(SDIO_ANY_ID, SDIO_ANY_ID, - add_quirk_for_sdio_devices, - MMC_QUIRK_BROKEN_CLK_GATING), - - SDIO_FIXUP(SDIO_VENDOR_ID_TI, SDIO_DEVICE_ID_TI_WL1271, - remove_quirk, MMC_QUIRK_BROKEN_CLK_GATING), - SDIO_FIXUP(SDIO_VENDOR_ID_TI, SDIO_DEVICE_ID_TI_WL1271, add_quirk, MMC_QUIRK_NONSTD_FUNC_IF), diff --git a/drivers/mmc/core/sd.c b/drivers/mmc/core/sd.c index e124db0fc178..b1b9200a4715 100644 --- a/drivers/mmc/core/sd.c +++ b/drivers/mmc/core/sd.c @@ -800,9 +800,7 @@ static int mmc_sd_get_ro(struct mmc_host *host) if (!host->ops->get_ro) return -1; - mmc_host_clk_hold(host); ro = host->ops->get_ro(host); - mmc_host_clk_release(host); return ro; } diff --git a/drivers/mmc/core/sdio.c b/drivers/mmc/core/sdio.c index 95bc1014b7a2..16d838e6d623 100644 --- a/drivers/mmc/core/sdio.c +++ b/drivers/mmc/core/sdio.c @@ -956,13 +956,10 @@ static int mmc_sdio_resume(struct mmc_host *host) } if (!err && host->sdio_irqs) { - if (!(host->caps2 & MMC_CAP2_SDIO_IRQ_NOTHREAD)) { + if (!(host->caps2 & MMC_CAP2_SDIO_IRQ_NOTHREAD)) wake_up_process(host->sdio_irq_thread); - } else if (host->caps & MMC_CAP_SDIO_IRQ) { - mmc_host_clk_hold(host); + else if (host->caps & MMC_CAP_SDIO_IRQ) host->ops->enable_sdio_irq(host, 1); - mmc_host_clk_release(host); - } } mmc_release_host(host); diff --git a/drivers/mmc/core/sdio_irq.c b/drivers/mmc/core/sdio_irq.c index 09cc67d028f0..91bbbfb29f3f 100644 --- a/drivers/mmc/core/sdio_irq.c +++ b/drivers/mmc/core/sdio_irq.c @@ -168,21 +168,15 @@ static int sdio_irq_thread(void *_host) } set_current_state(TASK_INTERRUPTIBLE); - if (host->caps & MMC_CAP_SDIO_IRQ) { - mmc_host_clk_hold(host); + if (host->caps & MMC_CAP_SDIO_IRQ) host->ops->enable_sdio_irq(host, 1); - mmc_host_clk_release(host); - } if (!kthread_should_stop()) schedule_timeout(period); set_current_state(TASK_RUNNING); } while (!kthread_should_stop()); - if (host->caps & MMC_CAP_SDIO_IRQ) { - mmc_host_clk_hold(host); + if (host->caps & MMC_CAP_SDIO_IRQ) host->ops->enable_sdio_irq(host, 0); - mmc_host_clk_release(host); - } pr_debug("%s: IRQ thread exiting with code %d\n", mmc_hostname(host), ret); @@ -208,9 +202,7 @@ static int sdio_card_irq_get(struct mmc_card *card) return err; } } else if (host->caps & MMC_CAP_SDIO_IRQ) { - mmc_host_clk_hold(host); host->ops->enable_sdio_irq(host, 1); - mmc_host_clk_release(host); } } @@ -229,9 +221,7 @@ static int sdio_card_irq_put(struct mmc_card *card) atomic_set(&host->sdio_irq_thread_abort, 1); kthread_stop(host->sdio_irq_thread); } else if (host->caps & MMC_CAP_SDIO_IRQ) { - mmc_host_clk_hold(host); host->ops->enable_sdio_irq(host, 0); - mmc_host_clk_release(host); } } |