diff options
Diffstat (limited to 'drivers/video/backlight')
45 files changed, 299 insertions, 447 deletions
diff --git a/drivers/video/backlight/88pm860x_bl.c b/drivers/video/backlight/88pm860x_bl.c index 25e409bbb1a2..0a1db2824076 100644 --- a/drivers/video/backlight/88pm860x_bl.c +++ b/drivers/video/backlight/88pm860x_bl.c @@ -11,7 +11,6 @@ #include <linux/of.h> #include <linux/platform_device.h> #include <linux/slab.h> -#include <linux/fb.h> #include <linux/i2c.h> #include <linux/backlight.h> #include <linux/mfd/88pm860x.h> @@ -151,7 +150,7 @@ static int pm860x_backlight_dt_init(struct platform_device *pdev, struct pm860x_backlight_data *data, char *name) { - struct device_node *nproot, *np; + struct device_node *nproot; int iset = 0; nproot = of_get_child_by_name(pdev->dev.parent->of_node, "backlights"); @@ -159,14 +158,13 @@ static int pm860x_backlight_dt_init(struct platform_device *pdev, dev_err(&pdev->dev, "failed to find backlights node\n"); return -ENODEV; } - for_each_child_of_node(nproot, np) { + for_each_child_of_node_scoped(nproot, np) { if (of_node_name_eq(np, name)) { of_property_read_u32(np, "marvell,88pm860x-iset", &iset); data->iset = PM8606_WLED_CURRENT(iset); of_property_read_u32(np, "marvell,88pm860x-pwm", &data->pwm); - of_node_put(np); break; } } diff --git a/drivers/video/backlight/Kconfig b/drivers/video/backlight/Kconfig index 3614a5d29c71..d9374d208cee 100644 --- a/drivers/video/backlight/Kconfig +++ b/drivers/video/backlight/Kconfig @@ -70,7 +70,7 @@ config LCD_ILI9320 then say y to include a power driver for it. config LCD_TDO24M - tristate "Toppoly TDO24M and TDO35S LCD Panels support" + tristate "Toppoly TDO24M and TDO35S LCD Panels support" depends on SPI_MASTER help If you have a Toppoly TDO24M/TDO35S series LCD panel, say y here to @@ -290,6 +290,17 @@ config BACKLIGHT_APPLE If you have an Intel-based Apple say Y to enable a driver for its backlight. +config BACKLIGHT_APPLE_DWI + tristate "Apple DWI 2-Wire Interface Backlight Driver" + depends on ARCH_APPLE || COMPILE_TEST + help + Say Y to enable the backlight driver for backlight controllers + attached via the Apple DWI 2-wire interface which is found in some + Apple iPhones, iPads and iPod touches. + + To compile this driver as a module, choose M here: the module will + be called apple_dwi_bl. + config BACKLIGHT_QCOM_WLED tristate "Qualcomm PMIC WLED Driver" select REGMAP @@ -359,13 +370,6 @@ config BACKLIGHT_88PM860X help Say Y to enable the backlight driver for Marvell 88PM8606. -config BACKLIGHT_PCF50633 - tristate "Backlight driver for NXP PCF50633 MFD" - depends on MFD_PCF50633 - help - If you have a backlight driven by a NXP PCF50633 MFD, say Y here to - enable its driver. - config BACKLIGHT_AAT2870 tristate "AnalogicTech AAT2870 Backlight" depends on MFD_AAT2870_CORE diff --git a/drivers/video/backlight/Makefile b/drivers/video/backlight/Makefile index 8fc98f760a8a..dfbb169bf6ea 100644 --- a/drivers/video/backlight/Makefile +++ b/drivers/video/backlight/Makefile @@ -23,6 +23,7 @@ obj-$(CONFIG_BACKLIGHT_ADP5520) += adp5520_bl.o obj-$(CONFIG_BACKLIGHT_ADP8860) += adp8860_bl.o obj-$(CONFIG_BACKLIGHT_ADP8870) += adp8870_bl.o obj-$(CONFIG_BACKLIGHT_APPLE) += apple_bl.o +obj-$(CONFIG_BACKLIGHT_APPLE_DWI) += apple_dwi_bl.o obj-$(CONFIG_BACKLIGHT_AS3711) += as3711_bl.o obj-$(CONFIG_BACKLIGHT_BD6107) += bd6107.o obj-$(CONFIG_BACKLIGHT_CLASS_DEVICE) += backlight.o @@ -49,7 +50,6 @@ obj-$(CONFIG_BACKLIGHT_MP3309C) += mp3309c.o obj-$(CONFIG_BACKLIGHT_MT6370) += mt6370-backlight.o obj-$(CONFIG_BACKLIGHT_OMAP1) += omap1_bl.o obj-$(CONFIG_BACKLIGHT_PANDORA) += pandora_bl.o -obj-$(CONFIG_BACKLIGHT_PCF50633) += pcf50633-backlight.o obj-$(CONFIG_BACKLIGHT_PWM) += pwm_bl.o obj-$(CONFIG_BACKLIGHT_QCOM_WLED) += qcom-wled.o obj-$(CONFIG_BACKLIGHT_RT4831) += rt4831-backlight.o diff --git a/drivers/video/backlight/aat2870_bl.c b/drivers/video/backlight/aat2870_bl.c index 68d327ee4b2e..8b790df1e842 100644 --- a/drivers/video/backlight/aat2870_bl.c +++ b/drivers/video/backlight/aat2870_bl.c @@ -186,7 +186,7 @@ static struct platform_driver aat2870_bl_driver = { .name = "aat2870-backlight", }, .probe = aat2870_bl_probe, - .remove_new = aat2870_bl_remove, + .remove = aat2870_bl_remove, }; static int __init aat2870_bl_init(void) diff --git a/drivers/video/backlight/adp5520_bl.c b/drivers/video/backlight/adp5520_bl.c index 8e0e9cfe5fe9..81c40d355aae 100644 --- a/drivers/video/backlight/adp5520_bl.c +++ b/drivers/video/backlight/adp5520_bl.c @@ -8,7 +8,6 @@ #include <linux/kernel.h> #include <linux/init.h> #include <linux/platform_device.h> -#include <linux/fb.h> #include <linux/backlight.h> #include <linux/mfd/adp5520.h> #include <linux/slab.h> @@ -375,7 +374,7 @@ static struct platform_driver adp5520_bl_driver = { .pm = &adp5520_bl_pm_ops, }, .probe = adp5520_bl_probe, - .remove_new = adp5520_bl_remove, + .remove = adp5520_bl_remove, }; module_platform_driver(adp5520_bl_driver); diff --git a/drivers/video/backlight/adp8860_bl.c b/drivers/video/backlight/adp8860_bl.c index f51ada4795e8..d4bbd7a7406b 100644 --- a/drivers/video/backlight/adp8860_bl.c +++ b/drivers/video/backlight/adp8860_bl.c @@ -11,7 +11,6 @@ #include <linux/pm.h> #include <linux/platform_device.h> #include <linux/i2c.h> -#include <linux/fb.h> #include <linux/backlight.h> #include <linux/leds.h> #include <linux/slab.h> diff --git a/drivers/video/backlight/adp8870_bl.c b/drivers/video/backlight/adp8870_bl.c index ad4bd4c8f441..e09e20492e7c 100644 --- a/drivers/video/backlight/adp8870_bl.c +++ b/drivers/video/backlight/adp8870_bl.c @@ -11,7 +11,6 @@ #include <linux/pm.h> #include <linux/platform_device.h> #include <linux/i2c.h> -#include <linux/fb.h> #include <linux/backlight.h> #include <linux/leds.h> #include <linux/workqueue.h> diff --git a/drivers/video/backlight/apple_dwi_bl.c b/drivers/video/backlight/apple_dwi_bl.c new file mode 100644 index 000000000000..93bd744972d6 --- /dev/null +++ b/drivers/video/backlight/apple_dwi_bl.c @@ -0,0 +1,123 @@ +// SPDX-License-Identifier: GPL-2.0 OR MIT +/* + * Driver for backlight controllers attached via Apple DWI 2-wire interface + * + * Copyright (c) 2024 Nick Chan <towinchenmi@gmail.com> + */ + +#include <linux/backlight.h> +#include <linux/bitfield.h> +#include <linux/device.h> +#include <linux/io.h> +#include <linux/module.h> +#include <linux/platform_device.h> + +#define DWI_BL_CTL 0x0 +#define DWI_BL_CTL_SEND1 BIT(0) +#define DWI_BL_CTL_SEND2 BIT(4) +#define DWI_BL_CTL_SEND3 BIT(5) +#define DWI_BL_CTL_LE_DATA BIT(6) +/* Only used on Apple A9 and later */ +#define DWI_BL_CTL_SEND4 BIT(12) + +#define DWI_BL_CMD 0x4 +#define DWI_BL_CMD_TYPE GENMASK(31, 28) +#define DWI_BL_CMD_TYPE_SET_BRIGHTNESS 0xa +#define DWI_BL_CMD_DATA GENMASK(10, 0) + +#define DWI_BL_CTL_SEND (DWI_BL_CTL_SEND1 | \ + DWI_BL_CTL_SEND2 | \ + DWI_BL_CTL_SEND3 | \ + DWI_BL_CTL_LE_DATA | \ + DWI_BL_CTL_SEND4) + +#define DWI_BL_MAX_BRIGHTNESS 2047 + +struct apple_dwi_bl { + void __iomem *base; +}; + +static int dwi_bl_update_status(struct backlight_device *bl) +{ + struct apple_dwi_bl *dwi_bl = bl_get_data(bl); + + int brightness = backlight_get_brightness(bl); + + u32 cmd = 0; + + cmd |= FIELD_PREP(DWI_BL_CMD_DATA, brightness); + cmd |= FIELD_PREP(DWI_BL_CMD_TYPE, DWI_BL_CMD_TYPE_SET_BRIGHTNESS); + + writel(cmd, dwi_bl->base + DWI_BL_CMD); + writel(DWI_BL_CTL_SEND, dwi_bl->base + DWI_BL_CTL); + + return 0; +} + +static int dwi_bl_get_brightness(struct backlight_device *bl) +{ + struct apple_dwi_bl *dwi_bl = bl_get_data(bl); + + u32 cmd = readl(dwi_bl->base + DWI_BL_CMD); + + return FIELD_GET(DWI_BL_CMD_DATA, cmd); +} + +static const struct backlight_ops dwi_bl_ops = { + .options = BL_CORE_SUSPENDRESUME, + .get_brightness = dwi_bl_get_brightness, + .update_status = dwi_bl_update_status +}; + +static int dwi_bl_probe(struct platform_device *dev) +{ + struct apple_dwi_bl *dwi_bl; + struct backlight_device *bl; + struct backlight_properties props; + struct resource *res; + + dwi_bl = devm_kzalloc(&dev->dev, sizeof(*dwi_bl), GFP_KERNEL); + if (!dwi_bl) + return -ENOMEM; + + dwi_bl->base = devm_platform_get_and_ioremap_resource(dev, 0, &res); + if (IS_ERR(dwi_bl->base)) + return PTR_ERR(dwi_bl->base); + + memset(&props, 0, sizeof(struct backlight_properties)); + props.type = BACKLIGHT_PLATFORM; + props.max_brightness = DWI_BL_MAX_BRIGHTNESS; + props.scale = BACKLIGHT_SCALE_LINEAR; + + bl = devm_backlight_device_register(&dev->dev, dev->name, &dev->dev, + dwi_bl, &dwi_bl_ops, &props); + if (IS_ERR(bl)) + return PTR_ERR(bl); + + platform_set_drvdata(dev, dwi_bl); + + bl->props.brightness = dwi_bl_get_brightness(bl); + + return 0; +} + +static const struct of_device_id dwi_bl_of_match[] = { + { .compatible = "apple,dwi-bl" }, + {}, +}; + +MODULE_DEVICE_TABLE(of, dwi_bl_of_match); + +static struct platform_driver dwi_bl_driver = { + .driver = { + .name = "apple-dwi-bl", + .of_match_table = dwi_bl_of_match + }, + .probe = dwi_bl_probe, +}; + +module_platform_driver(dwi_bl_driver); + +MODULE_DESCRIPTION("Apple DWI Backlight Driver"); +MODULE_AUTHOR("Nick Chan <towinchenmi@gmail.com>"); +MODULE_LICENSE("Dual MIT/GPL"); diff --git a/drivers/video/backlight/as3711_bl.c b/drivers/video/backlight/as3711_bl.c index e6f66bb35ef5..9f89eb19894e 100644 --- a/drivers/video/backlight/as3711_bl.c +++ b/drivers/video/backlight/as3711_bl.c @@ -10,7 +10,6 @@ #include <linux/delay.h> #include <linux/device.h> #include <linux/err.h> -#include <linux/fb.h> #include <linux/kernel.h> #include <linux/mfd/as3711.h> #include <linux/module.h> diff --git a/drivers/video/backlight/backlight.c b/drivers/video/backlight/backlight.c index a82934694d05..9dc93c5e480b 100644 --- a/drivers/video/backlight/backlight.c +++ b/drivers/video/backlight/backlight.c @@ -15,7 +15,6 @@ #include <linux/notifier.h> #include <linux/ctype.h> #include <linux/err.h> -#include <linux/fb.h> #include <linux/slab.h> #ifdef CONFIG_PMAC_BACKLIGHT @@ -57,15 +56,14 @@ * a hot-key to adjust backlight, the driver must notify the backlight * core that brightness has changed using backlight_force_update(). * - * The backlight driver core receives notifications from fbdev and - * if the event is FB_EVENT_BLANK and if the value of blank, from the - * FBIOBLANK ioctrl, results in a change in the backlight state the - * update_status() operation is called. + * Display drives can control the backlight device's status using + * backlight_notify_blank() and backlight_notify_blank_all(). If this + * results in a change in the backlight state the functions call the + * update_status() operation. */ static struct list_head backlight_dev_list; static struct mutex backlight_dev_list_mutex; -static struct blocking_notifier_head backlight_notifier; static const char *const backlight_types[] = { [BACKLIGHT_RAW] = "raw", @@ -79,85 +77,40 @@ static const char *const backlight_scale_types[] = { [BACKLIGHT_SCALE_NON_LINEAR] = "non-linear", }; -#if defined(CONFIG_FB_CORE) || (defined(CONFIG_FB_CORE_MODULE) && \ - defined(CONFIG_BACKLIGHT_CLASS_DEVICE_MODULE)) -/* - * fb_notifier_callback - * - * This callback gets called when something important happens inside a - * framebuffer driver. The backlight core only cares about FB_BLANK_UNBLANK - * which is reported to the driver using backlight_update_status() - * as a state change. - * - * There may be several fbdev's connected to the backlight device, - * in which case they are kept track of. A state change is only reported - * if there is a change in backlight for the specified fbdev. - */ -static int fb_notifier_callback(struct notifier_block *self, - unsigned long event, void *data) +void backlight_notify_blank(struct backlight_device *bd, struct device *display_dev, + bool fb_on, bool prev_fb_on) { - struct backlight_device *bd; - struct fb_event *evdata = data; - struct fb_info *info = evdata->info; - struct backlight_device *fb_bd = fb_bl_device(info); - int node = info->node; - int fb_blank = 0; - - /* If we aren't interested in this event, skip it immediately ... */ - if (event != FB_EVENT_BLANK) - return 0; - - bd = container_of(self, struct backlight_device, fb_notif); - mutex_lock(&bd->ops_lock); + guard(mutex)(&bd->ops_lock); if (!bd->ops) - goto out; - if (bd->ops->controls_device && !bd->ops->controls_device(bd, info->device)) - goto out; - if (fb_bd && fb_bd != bd) - goto out; - - fb_blank = *(int *)evdata->data; - if (fb_blank == FB_BLANK_UNBLANK && !bd->fb_bl_on[node]) { - bd->fb_bl_on[node] = true; + return; + if (bd->ops->controls_device && !bd->ops->controls_device(bd, display_dev)) + return; + + if (fb_on && (!prev_fb_on || !bd->use_count)) { if (!bd->use_count++) { bd->props.state &= ~BL_CORE_FBBLANK; backlight_update_status(bd); } - } else if (fb_blank != FB_BLANK_UNBLANK && bd->fb_bl_on[node]) { - bd->fb_bl_on[node] = false; + } else if (!fb_on && prev_fb_on && bd->use_count) { if (!(--bd->use_count)) { bd->props.state |= BL_CORE_FBBLANK; backlight_update_status(bd); } } -out: - mutex_unlock(&bd->ops_lock); - return 0; } +EXPORT_SYMBOL(backlight_notify_blank); -static int backlight_register_fb(struct backlight_device *bd) +void backlight_notify_blank_all(struct device *display_dev, bool fb_on, bool prev_fb_on) { - memset(&bd->fb_notif, 0, sizeof(bd->fb_notif)); - bd->fb_notif.notifier_call = fb_notifier_callback; + struct backlight_device *bd; - return fb_register_client(&bd->fb_notif); -} + guard(mutex)(&backlight_dev_list_mutex); -static void backlight_unregister_fb(struct backlight_device *bd) -{ - fb_unregister_client(&bd->fb_notif); -} -#else -static inline int backlight_register_fb(struct backlight_device *bd) -{ - return 0; + list_for_each_entry(bd, &backlight_dev_list, entry) + backlight_notify_blank(bd, display_dev, fb_on, prev_fb_on); } - -static inline void backlight_unregister_fb(struct backlight_device *bd) -{ -} -#endif /* CONFIG_FB_CORE */ +EXPORT_SYMBOL(backlight_notify_blank_all); static void backlight_generate_event(struct backlight_device *bd, enum backlight_update_reason reason) @@ -448,12 +401,6 @@ struct backlight_device *backlight_device_register(const char *name, return ERR_PTR(rc); } - rc = backlight_register_fb(new_bd); - if (rc) { - device_unregister(&new_bd->dev); - return ERR_PTR(rc); - } - new_bd->ops = ops; #ifdef CONFIG_PMAC_BACKLIGHT @@ -467,9 +414,6 @@ struct backlight_device *backlight_device_register(const char *name, list_add(&new_bd->entry, &backlight_dev_list); mutex_unlock(&backlight_dev_list_mutex); - blocking_notifier_call_chain(&backlight_notifier, - BACKLIGHT_REGISTERED, new_bd); - return new_bd; } EXPORT_SYMBOL(backlight_device_register); @@ -539,14 +483,10 @@ void backlight_device_unregister(struct backlight_device *bd) mutex_unlock(&pmac_backlight_mutex); #endif - blocking_notifier_call_chain(&backlight_notifier, - BACKLIGHT_UNREGISTERED, bd); - mutex_lock(&bd->ops_lock); bd->ops = NULL; mutex_unlock(&bd->ops_lock); - backlight_unregister_fb(bd); device_unregister(&bd->dev); } EXPORT_SYMBOL(backlight_device_unregister); @@ -567,40 +507,6 @@ static int devm_backlight_device_match(struct device *dev, void *res, } /** - * backlight_register_notifier - get notified of backlight (un)registration - * @nb: notifier block with the notifier to call on backlight (un)registration - * - * Register a notifier to get notified when backlight devices get registered - * or unregistered. - * - * RETURNS: - * - * 0 on success, otherwise a negative error code - */ -int backlight_register_notifier(struct notifier_block *nb) -{ - return blocking_notifier_chain_register(&backlight_notifier, nb); -} -EXPORT_SYMBOL(backlight_register_notifier); - -/** - * backlight_unregister_notifier - unregister a backlight notifier - * @nb: notifier block to unregister - * - * Register a notifier to get notified when backlight devices get registered - * or unregistered. - * - * RETURNS: - * - * 0 on success, otherwise a negative error code - */ -int backlight_unregister_notifier(struct notifier_block *nb) -{ - return blocking_notifier_chain_unregister(&backlight_notifier, nb); -} -EXPORT_SYMBOL(backlight_unregister_notifier); - -/** * devm_backlight_device_register - register a new backlight device * @dev: the device to register * @name: the name of the device @@ -767,7 +673,6 @@ static int __init backlight_class_init(void) INIT_LIST_HEAD(&backlight_dev_list); mutex_init(&backlight_dev_list_mutex); - BLOCKING_INIT_NOTIFIER_HEAD(&backlight_notifier); return 0; } diff --git a/drivers/video/backlight/bd6107.c b/drivers/video/backlight/bd6107.c index 90764f83d2f1..74567af84e97 100644 --- a/drivers/video/backlight/bd6107.c +++ b/drivers/video/backlight/bd6107.c @@ -10,7 +10,6 @@ #include <linux/backlight.h> #include <linux/delay.h> #include <linux/err.h> -#include <linux/fb.h> #include <linux/gpio/consumer.h> #include <linux/i2c.h> #include <linux/module.h> diff --git a/drivers/video/backlight/corgi_lcd.c b/drivers/video/backlight/corgi_lcd.c index e4fcfbe38dc6..69f49371ea35 100644 --- a/drivers/video/backlight/corgi_lcd.c +++ b/drivers/video/backlight/corgi_lcd.c @@ -17,14 +17,13 @@ #include <linux/init.h> #include <linux/delay.h> #include <linux/gpio/consumer.h> -#include <linux/fb.h> #include <linux/lcd.h> #include <linux/spi/spi.h> #include <linux/spi/corgi_lcd.h> #include <linux/slab.h> #include <asm/mach/sharpsl_param.h> -#define POWER_IS_ON(pwr) ((pwr) <= FB_BLANK_NORMAL) +#define POWER_IS_ON(pwr) ((pwr) <= LCD_POWER_REDUCED) /* Register Addresses */ #define RESCTL_ADRS 0x00 @@ -332,12 +331,12 @@ static void corgi_lcd_power_off(struct corgi_lcd *lcd) POWER1_VW_OFF | POWER1_GVSS_OFF | POWER1_VDD_OFF); } -static int corgi_lcd_set_mode(struct lcd_device *ld, struct fb_videomode *m) +static int corgi_lcd_set_mode(struct lcd_device *ld, u32 xres, u32 yres) { struct corgi_lcd *lcd = lcd_get_data(ld); int mode = CORGI_LCD_MODE_QVGA; - if (m->xres == 640 || m->xres == 480) + if (xres == 640 || xres == 480) mode = CORGI_LCD_MODE_VGA; if (lcd->mode == mode) @@ -455,7 +454,7 @@ static int corgi_lcd_suspend(struct device *dev) corgibl_flags |= CORGIBL_SUSPENDED; corgi_bl_set_intensity(lcd, 0); - corgi_lcd_set_power(lcd->lcd_dev, FB_BLANK_POWERDOWN); + corgi_lcd_set_power(lcd->lcd_dev, LCD_POWER_OFF); return 0; } @@ -464,7 +463,7 @@ static int corgi_lcd_resume(struct device *dev) struct corgi_lcd *lcd = dev_get_drvdata(dev); corgibl_flags &= ~CORGIBL_SUSPENDED; - corgi_lcd_set_power(lcd->lcd_dev, FB_BLANK_UNBLANK); + corgi_lcd_set_power(lcd->lcd_dev, LCD_POWER_ON); backlight_update_status(lcd->bl_dev); return 0; } @@ -513,7 +512,7 @@ static int corgi_lcd_probe(struct spi_device *spi) if (IS_ERR(lcd->lcd_dev)) return PTR_ERR(lcd->lcd_dev); - lcd->power = FB_BLANK_POWERDOWN; + lcd->power = LCD_POWER_OFF; lcd->mode = (pdata) ? pdata->init_mode : CORGI_LCD_MODE_VGA; memset(&props, 0, sizeof(struct backlight_properties)); @@ -535,7 +534,7 @@ static int corgi_lcd_probe(struct spi_device *spi) lcd->kick_battery = pdata->kick_battery; spi_set_drvdata(spi, lcd); - corgi_lcd_set_power(lcd->lcd_dev, FB_BLANK_UNBLANK); + corgi_lcd_set_power(lcd->lcd_dev, LCD_POWER_ON); backlight_update_status(lcd->bl_dev); lcd->limit_mask = pdata->limit_mask; @@ -550,7 +549,7 @@ static void corgi_lcd_remove(struct spi_device *spi) lcd->bl_dev->props.power = BACKLIGHT_POWER_ON; lcd->bl_dev->props.brightness = 0; backlight_update_status(lcd->bl_dev); - corgi_lcd_set_power(lcd->lcd_dev, FB_BLANK_POWERDOWN); + corgi_lcd_set_power(lcd->lcd_dev, LCD_POWER_OFF); } static struct spi_driver corgi_lcd_driver = { diff --git a/drivers/video/backlight/da903x_bl.c b/drivers/video/backlight/da903x_bl.c index 71f21bbc7a9f..81ff42bec0ad 100644 --- a/drivers/video/backlight/da903x_bl.c +++ b/drivers/video/backlight/da903x_bl.c @@ -12,7 +12,6 @@ #include <linux/kernel.h> #include <linux/init.h> #include <linux/platform_device.h> -#include <linux/fb.h> #include <linux/backlight.h> #include <linux/mfd/da903x.h> #include <linux/slab.h> diff --git a/drivers/video/backlight/da9052_bl.c b/drivers/video/backlight/da9052_bl.c index b8ff7046510e..f41523d78121 100644 --- a/drivers/video/backlight/da9052_bl.c +++ b/drivers/video/backlight/da9052_bl.c @@ -9,7 +9,6 @@ #include <linux/backlight.h> #include <linux/delay.h> -#include <linux/fb.h> #include <linux/module.h> #include <linux/platform_device.h> @@ -165,7 +164,7 @@ MODULE_DEVICE_TABLE(platform, da9052_wled_ids); static struct platform_driver da9052_wled_driver = { .probe = da9052_backlight_probe, - .remove_new = da9052_backlight_remove, + .remove = da9052_backlight_remove, .id_table = da9052_wled_ids, .driver = { .name = "da9052-wled", diff --git a/drivers/video/backlight/ep93xx_bl.c b/drivers/video/backlight/ep93xx_bl.c index 2387009d452d..f59effc02352 100644 --- a/drivers/video/backlight/ep93xx_bl.c +++ b/drivers/video/backlight/ep93xx_bl.c @@ -11,7 +11,6 @@ #include <linux/module.h> #include <linux/platform_device.h> #include <linux/io.h> -#include <linux/fb.h> #include <linux/backlight.h> #define EP93XX_MAX_COUNT 255 diff --git a/drivers/video/backlight/hp680_bl.c b/drivers/video/backlight/hp680_bl.c index ddb7ab4df77e..d8c2e4ada384 100644 --- a/drivers/video/backlight/hp680_bl.c +++ b/drivers/video/backlight/hp680_bl.c @@ -15,7 +15,6 @@ #include <linux/init.h> #include <linux/platform_device.h> #include <linux/spinlock.h> -#include <linux/fb.h> #include <linux/backlight.h> #include <cpu/dac.h> @@ -130,7 +129,7 @@ static void hp680bl_remove(struct platform_device *pdev) static struct platform_driver hp680bl_driver = { .probe = hp680bl_probe, - .remove_new = hp680bl_remove, + .remove = hp680bl_remove, .driver = { .name = "hp680-bl", .pm = &hp680bl_pm_ops, diff --git a/drivers/video/backlight/hx8357.c b/drivers/video/backlight/hx8357.c index cdd7b7686723..61a57d38700f 100644 --- a/drivers/video/backlight/hx8357.c +++ b/drivers/video/backlight/hx8357.c @@ -532,7 +532,7 @@ static int hx8369_lcd_init(struct lcd_device *lcdev) return 0; } -#define POWER_IS_ON(pwr) ((pwr) <= FB_BLANK_NORMAL) +#define POWER_IS_ON(pwr) ((pwr) <= LCD_POWER_REDUCED) static int hx8357_set_power(struct lcd_device *lcdev, int power) { diff --git a/drivers/video/backlight/ili922x.c b/drivers/video/backlight/ili922x.c index 7683e209ad6b..5e1bf0c5831f 100644 --- a/drivers/video/backlight/ili922x.c +++ b/drivers/video/backlight/ili922x.c @@ -8,7 +8,6 @@ * memory is cyclically updated over the RGB interface. */ -#include <linux/fb.h> #include <linux/delay.h> #include <linux/errno.h> #include <linux/init.h> @@ -119,7 +118,7 @@ #define CMD_BUFSIZE 16 -#define POWER_IS_ON(pwr) ((pwr) <= FB_BLANK_NORMAL) +#define POWER_IS_ON(pwr) ((pwr) <= LCD_POWER_REDUCED) #define set_tx_byte(b) (tx_invert ? ~(b) : b) @@ -513,7 +512,7 @@ static int ili922x_probe(struct spi_device *spi) ili922x_display_init(spi); - ili->power = FB_BLANK_POWERDOWN; + ili->power = LCD_POWER_OFF; lcd = devm_lcd_device_register(&spi->dev, "ili922xlcd", &spi->dev, ili, &ili922x_ops); @@ -525,7 +524,7 @@ static int ili922x_probe(struct spi_device *spi) ili->ld = lcd; spi_set_drvdata(spi, ili); - ili922x_lcd_power(ili, FB_BLANK_UNBLANK); + ili922x_lcd_power(ili, LCD_POWER_ON); return 0; } diff --git a/drivers/video/backlight/ili9320.c b/drivers/video/backlight/ili9320.c index 3e318d1891b6..2df96a882119 100644 --- a/drivers/video/backlight/ili9320.c +++ b/drivers/video/backlight/ili9320.c @@ -10,7 +10,6 @@ #include <linux/delay.h> #include <linux/err.h> -#include <linux/fb.h> #include <linux/init.h> #include <linux/lcd.h> #include <linux/module.h> @@ -121,7 +120,7 @@ static inline int ili9320_power_off(struct ili9320 *lcd) return 0; } -#define POWER_IS_ON(pwr) ((pwr) <= FB_BLANK_NORMAL) +#define POWER_IS_ON(pwr) ((pwr) <= LCD_POWER_REDUCED) static int ili9320_power(struct ili9320 *lcd, int power) { @@ -223,7 +222,7 @@ int ili9320_probe_spi(struct spi_device *spi, ili->dev = dev; ili->client = client; - ili->power = FB_BLANK_POWERDOWN; + ili->power = LCD_POWER_OFF; ili->platdata = cfg; spi_set_drvdata(spi, ili); @@ -241,7 +240,7 @@ int ili9320_probe_spi(struct spi_device *spi, dev_info(dev, "initialising %s\n", client->name); - ret = ili9320_power(ili, FB_BLANK_UNBLANK); + ret = ili9320_power(ili, LCD_POWER_ON); if (ret != 0) { dev_err(dev, "failed to set lcd power state\n"); return ret; @@ -253,7 +252,7 @@ EXPORT_SYMBOL_GPL(ili9320_probe_spi); void ili9320_remove(struct ili9320 *ili) { - ili9320_power(ili, FB_BLANK_POWERDOWN); + ili9320_power(ili, LCD_POWER_OFF); } EXPORT_SYMBOL_GPL(ili9320_remove); @@ -262,7 +261,7 @@ int ili9320_suspend(struct ili9320 *lcd) { int ret; - ret = ili9320_power(lcd, FB_BLANK_POWERDOWN); + ret = ili9320_power(lcd, LCD_POWER_OFF); if (lcd->platdata->suspend == ILI9320_SUSPEND_DEEP) { ili9320_write(lcd, ILI9320_POWER1, lcd->power1 | @@ -282,7 +281,7 @@ int ili9320_resume(struct ili9320 *lcd) if (lcd->platdata->suspend == ILI9320_SUSPEND_DEEP) ili9320_write(lcd, ILI9320_POWER1, 0x00); - return ili9320_power(lcd, FB_BLANK_UNBLANK); + return ili9320_power(lcd, LCD_POWER_ON); } EXPORT_SYMBOL_GPL(ili9320_resume); #endif @@ -290,7 +289,7 @@ EXPORT_SYMBOL_GPL(ili9320_resume); /* Power down all displays on reboot, poweroff or halt */ void ili9320_shutdown(struct ili9320 *lcd) { - ili9320_power(lcd, FB_BLANK_POWERDOWN); + ili9320_power(lcd, LCD_POWER_OFF); } EXPORT_SYMBOL_GPL(ili9320_shutdown); diff --git a/drivers/video/backlight/jornada720_lcd.c b/drivers/video/backlight/jornada720_lcd.c index 5c64fa61e810..31a52dee9060 100644 --- a/drivers/video/backlight/jornada720_lcd.c +++ b/drivers/video/backlight/jornada720_lcd.c @@ -6,7 +6,7 @@ */ #include <linux/device.h> -#include <linux/fb.h> +#include <linux/io.h> #include <linux/kernel.h> #include <linux/lcd.h> #include <linux/module.h> @@ -23,14 +23,14 @@ static int jornada_lcd_get_power(struct lcd_device *ld) { - return PPSR & PPC_LDD2 ? FB_BLANK_UNBLANK : FB_BLANK_POWERDOWN; + return PPSR & PPC_LDD2 ? LCD_POWER_ON : LCD_POWER_OFF; } static int jornada_lcd_get_contrast(struct lcd_device *ld) { int ret; - if (jornada_lcd_get_power(ld) != FB_BLANK_UNBLANK) + if (jornada_lcd_get_power(ld) != LCD_POWER_ON) return 0; jornada_ssp_start(); @@ -71,7 +71,7 @@ success: static int jornada_lcd_set_power(struct lcd_device *ld, int power) { - if (power != FB_BLANK_UNBLANK) { + if (power != LCD_POWER_ON) { PPSR &= ~PPC_LDD2; PPDR |= PPC_LDD2; } else { @@ -106,7 +106,7 @@ static int jornada_lcd_probe(struct platform_device *pdev) /* lets set our default values */ jornada_lcd_set_contrast(lcd_device, LCD_DEF_CONTRAST); - jornada_lcd_set_power(lcd_device, FB_BLANK_UNBLANK); + jornada_lcd_set_power(lcd_device, LCD_POWER_ON); /* give it some time to startup */ msleep(100); diff --git a/drivers/video/backlight/ktd2801-backlight.c b/drivers/video/backlight/ktd2801-backlight.c index d295c2766025..0489b0615ceb 100644 --- a/drivers/video/backlight/ktd2801-backlight.c +++ b/drivers/video/backlight/ktd2801-backlight.c @@ -122,7 +122,7 @@ static struct platform_driver ktd2801_backlight_driver = { }; module_platform_driver(ktd2801_backlight_driver); -MODULE_IMPORT_NS(EXPRESSWIRE); +MODULE_IMPORT_NS("EXPRESSWIRE"); MODULE_AUTHOR("Duje Mihanović <duje.mihanovic@skole.hr>"); MODULE_DESCRIPTION("Kinetic KTD2801 Backlight Driver"); MODULE_LICENSE("GPL"); diff --git a/drivers/video/backlight/ktz8866.c b/drivers/video/backlight/ktz8866.c index 2e508741c0af..351c2b4d63ed 100644 --- a/drivers/video/backlight/ktz8866.c +++ b/drivers/video/backlight/ktz8866.c @@ -190,6 +190,7 @@ static const struct of_device_id ktz8866_match_table[] = { }, {}, }; +MODULE_DEVICE_TABLE(of, ktz8866_match_table); static struct i2c_driver ktz8866_driver = { .driver = { diff --git a/drivers/video/backlight/l4f00242t03.c b/drivers/video/backlight/l4f00242t03.c index 4175a4603071..d04d2256306e 100644 --- a/drivers/video/backlight/l4f00242t03.c +++ b/drivers/video/backlight/l4f00242t03.c @@ -112,40 +112,40 @@ static int l4f00242t03_lcd_power_set(struct lcd_device *ld, int power) const u16 slpin = 0x10; const u16 disoff = 0x28; - if (power <= FB_BLANK_NORMAL) { - if (priv->lcd_state <= FB_BLANK_NORMAL) { + if (power <= LCD_POWER_REDUCED) { + if (priv->lcd_state <= LCD_POWER_REDUCED) { /* Do nothing, the LCD is running */ - } else if (priv->lcd_state < FB_BLANK_POWERDOWN) { + } else if (priv->lcd_state < LCD_POWER_OFF) { dev_dbg(&spi->dev, "Resuming LCD\n"); spi_write(spi, (const u8 *)&slpout, sizeof(u16)); msleep(60); spi_write(spi, (const u8 *)&dison, sizeof(u16)); } else { - /* priv->lcd_state == FB_BLANK_POWERDOWN */ + /* priv->lcd_state == LCD_POWER_OFF */ l4f00242t03_lcd_init(spi); - priv->lcd_state = FB_BLANK_VSYNC_SUSPEND; + priv->lcd_state = LCD_POWER_REDUCED_VSYNC_SUSPEND; l4f00242t03_lcd_power_set(priv->ld, power); } - } else if (power < FB_BLANK_POWERDOWN) { - if (priv->lcd_state <= FB_BLANK_NORMAL) { + } else if (power < LCD_POWER_OFF) { + if (priv->lcd_state <= LCD_POWER_REDUCED) { /* Send the display in standby */ dev_dbg(&spi->dev, "Standby the LCD\n"); spi_write(spi, (const u8 *)&disoff, sizeof(u16)); msleep(60); spi_write(spi, (const u8 *)&slpin, sizeof(u16)); - } else if (priv->lcd_state < FB_BLANK_POWERDOWN) { + } else if (priv->lcd_state < LCD_POWER_OFF) { /* Do nothing, the LCD is already in standby */ } else { - /* priv->lcd_state == FB_BLANK_POWERDOWN */ + /* priv->lcd_state == LCD_POWER_OFF */ l4f00242t03_lcd_init(spi); - priv->lcd_state = FB_BLANK_UNBLANK; + priv->lcd_state = LCD_POWER_ON; l4f00242t03_lcd_power_set(ld, power); } } else { - /* power == FB_BLANK_POWERDOWN */ - if (priv->lcd_state != FB_BLANK_POWERDOWN) { + /* power == LCD_POWER_OFF */ + if (priv->lcd_state != LCD_POWER_OFF) { /* Clear the screen before shutting down */ spi_write(spi, (const u8 *)&disoff, sizeof(u16)); msleep(60); @@ -212,8 +212,8 @@ static int l4f00242t03_probe(struct spi_device *spi) /* Init the LCD */ l4f00242t03_lcd_init(spi); - priv->lcd_state = FB_BLANK_VSYNC_SUSPEND; - l4f00242t03_lcd_power_set(priv->ld, FB_BLANK_UNBLANK); + priv->lcd_state = LCD_POWER_REDUCED_VSYNC_SUSPEND; + l4f00242t03_lcd_power_set(priv->ld, LCD_POWER_ON); dev_info(&spi->dev, "Epson l4f00242t03 lcd probed.\n"); @@ -224,7 +224,7 @@ static void l4f00242t03_remove(struct spi_device *spi) { struct l4f00242t03_priv *priv = spi_get_drvdata(spi); - l4f00242t03_lcd_power_set(priv->ld, FB_BLANK_POWERDOWN); + l4f00242t03_lcd_power_set(priv->ld, LCD_POWER_OFF); } static void l4f00242t03_shutdown(struct spi_device *spi) @@ -232,7 +232,7 @@ static void l4f00242t03_shutdown(struct spi_device *spi) struct l4f00242t03_priv *priv = spi_get_drvdata(spi); if (priv) - l4f00242t03_lcd_power_set(priv->ld, FB_BLANK_POWERDOWN); + l4f00242t03_lcd_power_set(priv->ld, LCD_POWER_OFF); } diff --git a/drivers/video/backlight/lcd.c b/drivers/video/backlight/lcd.c index ceec90ca758b..affe5c52471a 100644 --- a/drivers/video/backlight/lcd.c +++ b/drivers/video/backlight/lcd.c @@ -15,60 +15,59 @@ #include <linux/notifier.h> #include <linux/ctype.h> #include <linux/err.h> -#include <linux/fb.h> #include <linux/slab.h> -#if defined(CONFIG_FB) || (defined(CONFIG_FB_MODULE) && \ - defined(CONFIG_LCD_CLASS_DEVICE_MODULE)) -/* This callback gets called when something important happens inside a - * framebuffer driver. We're looking if that important event is blanking, - * and if it is, we're switching lcd power as well ... - */ -static int fb_notifier_callback(struct notifier_block *self, - unsigned long event, void *data) +static DEFINE_MUTEX(lcd_dev_list_mutex); +static LIST_HEAD(lcd_dev_list); + +static void lcd_notify_blank(struct lcd_device *ld, struct device *display_dev, + int power) { - struct lcd_device *ld; - struct fb_event *evdata = data; + guard(mutex)(&ld->ops_lock); - ld = container_of(self, struct lcd_device, fb_notif); - if (!ld->ops) - return 0; + if (!ld->ops || !ld->ops->set_power) + return; + if (ld->ops->controls_device && !ld->ops->controls_device(ld, display_dev)) + return; - mutex_lock(&ld->ops_lock); - if (!ld->ops->check_fb || ld->ops->check_fb(ld, evdata->info)) { - if (event == FB_EVENT_BLANK) { - if (ld->ops->set_power) - ld->ops->set_power(ld, *(int *)evdata->data); - } else { - if (ld->ops->set_mode) - ld->ops->set_mode(ld, evdata->data); - } - } - mutex_unlock(&ld->ops_lock); - return 0; + ld->ops->set_power(ld, power); } -static int lcd_register_fb(struct lcd_device *ld) +void lcd_notify_blank_all(struct device *display_dev, int power) { - memset(&ld->fb_notif, 0, sizeof(ld->fb_notif)); - ld->fb_notif.notifier_call = fb_notifier_callback; - return fb_register_client(&ld->fb_notif); -} + struct lcd_device *ld; -static void lcd_unregister_fb(struct lcd_device *ld) -{ - fb_unregister_client(&ld->fb_notif); + guard(mutex)(&lcd_dev_list_mutex); + + list_for_each_entry(ld, &lcd_dev_list, entry) + lcd_notify_blank(ld, display_dev, power); } -#else -static int lcd_register_fb(struct lcd_device *ld) +EXPORT_SYMBOL(lcd_notify_blank_all); + +static void lcd_notify_mode_change(struct lcd_device *ld, struct device *display_dev, + unsigned int width, unsigned int height) { - return 0; + guard(mutex)(&ld->ops_lock); + + if (!ld->ops || !ld->ops->set_mode) + return; + if (ld->ops->controls_device && !ld->ops->controls_device(ld, display_dev)) + return; + + ld->ops->set_mode(ld, width, height); } -static inline void lcd_unregister_fb(struct lcd_device *ld) +void lcd_notify_mode_change_all(struct device *display_dev, + unsigned int width, unsigned int height) { + struct lcd_device *ld; + + guard(mutex)(&lcd_dev_list_mutex); + + list_for_each_entry(ld, &lcd_dev_list, entry) + lcd_notify_mode_change(ld, display_dev, width, height); } -#endif /* CONFIG_FB */ +EXPORT_SYMBOL(lcd_notify_mode_change_all); static ssize_t lcd_power_show(struct device *dev, struct device_attribute *attr, char *buf) @@ -219,11 +218,8 @@ struct lcd_device *lcd_device_register(const char *name, struct device *parent, return ERR_PTR(rc); } - rc = lcd_register_fb(new_ld); - if (rc) { - device_unregister(&new_ld->dev); - return ERR_PTR(rc); - } + guard(mutex)(&lcd_dev_list_mutex); + list_add(&new_ld->entry, &lcd_dev_list); return new_ld; } @@ -240,10 +236,12 @@ void lcd_device_unregister(struct lcd_device *ld) if (!ld) return; + guard(mutex)(&lcd_dev_list_mutex); + list_del(&ld->entry); + mutex_lock(&ld->ops_lock); ld->ops = NULL; mutex_unlock(&ld->ops_lock); - lcd_unregister_fb(ld); device_unregister(&ld->dev); } diff --git a/drivers/video/backlight/led_bl.c b/drivers/video/backlight/led_bl.c index c7aefcd6e4e3..d2db157b2c29 100644 --- a/drivers/video/backlight/led_bl.c +++ b/drivers/video/backlight/led_bl.c @@ -229,8 +229,11 @@ static void led_bl_remove(struct platform_device *pdev) backlight_device_unregister(bl); led_bl_power_off(priv); - for (i = 0; i < priv->nb_leds; i++) + for (i = 0; i < priv->nb_leds; i++) { + mutex_lock(&priv->leds[i]->led_access); led_sysfs_enable(priv->leds[i]); + mutex_unlock(&priv->leds[i]->led_access); + } } static const struct of_device_id led_bl_of_match[] = { @@ -246,7 +249,7 @@ static struct platform_driver led_bl_driver = { .of_match_table = led_bl_of_match, }, .probe = led_bl_probe, - .remove_new = led_bl_remove, + .remove = led_bl_remove, }; module_platform_driver(led_bl_driver); diff --git a/drivers/video/backlight/lm3533_bl.c b/drivers/video/backlight/lm3533_bl.c index 5d06f8ca976c..babfd3ceec86 100644 --- a/drivers/video/backlight/lm3533_bl.c +++ b/drivers/video/backlight/lm3533_bl.c @@ -387,7 +387,7 @@ static struct platform_driver lm3533_bl_driver = { .pm = &lm3533_bl_pm_ops, }, .probe = lm3533_bl_probe, - .remove_new = lm3533_bl_remove, + .remove = lm3533_bl_remove, .shutdown = lm3533_bl_shutdown, }; module_platform_driver(lm3533_bl_driver); diff --git a/drivers/video/backlight/lms283gf05.c b/drivers/video/backlight/lms283gf05.c index a65490e83d3d..c8b7eeeb333e 100644 --- a/drivers/video/backlight/lms283gf05.c +++ b/drivers/video/backlight/lms283gf05.c @@ -126,7 +126,7 @@ static int lms283gf05_power_set(struct lcd_device *ld, int power) struct lms283gf05_state *st = lcd_get_data(ld); struct spi_device *spi = st->spi; - if (power <= FB_BLANK_NORMAL) { + if (power <= LCD_POWER_REDUCED) { if (st->reset) lms283gf05_reset(st->reset); lms283gf05_toggle(spi, disp_initseq, ARRAY_SIZE(disp_initseq)); diff --git a/drivers/video/backlight/lms501kf03.c b/drivers/video/backlight/lms501kf03.c index 8aebe0af3391..28721b48b4c7 100644 --- a/drivers/video/backlight/lms501kf03.c +++ b/drivers/video/backlight/lms501kf03.c @@ -6,9 +6,7 @@ * Author: Jingoo Han <jg1.han@samsung.com> */ -#include <linux/backlight.h> #include <linux/delay.h> -#include <linux/fb.h> #include <linux/lcd.h> #include <linux/module.h> #include <linux/spi/spi.h> @@ -206,7 +204,7 @@ static int lms501kf03_ldi_disable(struct lms501kf03 *lcd) static int lms501kf03_power_is_on(int power) { - return (power) <= FB_BLANK_NORMAL; + return (power) <= LCD_POWER_REDUCED; } static int lms501kf03_power_on(struct lms501kf03 *lcd) @@ -295,8 +293,8 @@ static int lms501kf03_set_power(struct lcd_device *ld, int power) { struct lms501kf03 *lcd = lcd_get_data(ld); - if (power != FB_BLANK_UNBLANK && power != FB_BLANK_POWERDOWN && - power != FB_BLANK_NORMAL) { + if (power != LCD_POWER_ON && power != LCD_POWER_OFF && + power != LCD_POWER_REDUCED) { dev_err(lcd->dev, "power value should be 0, 1 or 4.\n"); return -EINVAL; } @@ -350,11 +348,11 @@ static int lms501kf03_probe(struct spi_device *spi) * current lcd status is powerdown and then * it enables lcd panel. */ - lcd->power = FB_BLANK_POWERDOWN; + lcd->power = LCD_POWER_OFF; - lms501kf03_power(lcd, FB_BLANK_UNBLANK); + lms501kf03_power(lcd, LCD_POWER_ON); } else { - lcd->power = FB_BLANK_UNBLANK; + lcd->power = LCD_POWER_ON; } spi_set_drvdata(spi, lcd); @@ -368,7 +366,7 @@ static void lms501kf03_remove(struct spi_device *spi) { struct lms501kf03 *lcd = spi_get_drvdata(spi); - lms501kf03_power(lcd, FB_BLANK_POWERDOWN); + lms501kf03_power(lcd, LCD_POWER_OFF); } #ifdef CONFIG_PM_SLEEP @@ -382,16 +380,16 @@ static int lms501kf03_suspend(struct device *dev) * when lcd panel is suspend, lcd panel becomes off * regardless of status. */ - return lms501kf03_power(lcd, FB_BLANK_POWERDOWN); + return lms501kf03_power(lcd, LCD_POWER_OFF); } static int lms501kf03_resume(struct device *dev) { struct lms501kf03 *lcd = dev_get_drvdata(dev); - lcd->power = FB_BLANK_POWERDOWN; + lcd->power = LCD_POWER_OFF; - return lms501kf03_power(lcd, FB_BLANK_UNBLANK); + return lms501kf03_power(lcd, LCD_POWER_ON); } #endif @@ -402,7 +400,7 @@ static void lms501kf03_shutdown(struct spi_device *spi) { struct lms501kf03 *lcd = spi_get_drvdata(spi); - lms501kf03_power(lcd, FB_BLANK_POWERDOWN); + lms501kf03_power(lcd, LCD_POWER_OFF); } static struct spi_driver lms501kf03_driver = { diff --git a/drivers/video/backlight/locomolcd.c b/drivers/video/backlight/locomolcd.c index 346d3e29a843..1b493fb0516d 100644 --- a/drivers/video/backlight/locomolcd.c +++ b/drivers/video/backlight/locomolcd.c @@ -16,7 +16,6 @@ #include <linux/delay.h> #include <linux/device.h> #include <linux/interrupt.h> -#include <linux/fb.h> #include <linux/backlight.h> #include <asm/hardware/locomo.h> diff --git a/drivers/video/backlight/lp8788_bl.c b/drivers/video/backlight/lp8788_bl.c index 0b7663519fa5..f61a64905a02 100644 --- a/drivers/video/backlight/lp8788_bl.c +++ b/drivers/video/backlight/lp8788_bl.c @@ -177,7 +177,7 @@ static void lp8788_backlight_remove(struct platform_device *pdev) static struct platform_driver lp8788_bl_driver = { .probe = lp8788_backlight_probe, - .remove_new = lp8788_backlight_remove, + .remove = lp8788_backlight_remove, .driver = { .name = LP8788_DEV_BACKLIGHT, }, diff --git a/drivers/video/backlight/ltv350qv.c b/drivers/video/backlight/ltv350qv.c index cdc4c087f230..c919b0fe4cd9 100644 --- a/drivers/video/backlight/ltv350qv.c +++ b/drivers/video/backlight/ltv350qv.c @@ -6,7 +6,6 @@ */ #include <linux/delay.h> #include <linux/err.h> -#include <linux/fb.h> #include <linux/init.h> #include <linux/lcd.h> #include <linux/module.h> @@ -15,7 +14,7 @@ #include "ltv350qv.h" -#define POWER_IS_ON(pwr) ((pwr) <= FB_BLANK_NORMAL) +#define POWER_IS_ON(pwr) ((pwr) <= LCD_POWER_REDUCED) struct ltv350qv { struct spi_device *spi; @@ -233,7 +232,7 @@ static int ltv350qv_probe(struct spi_device *spi) return -ENOMEM; lcd->spi = spi; - lcd->power = FB_BLANK_POWERDOWN; + lcd->power = LCD_POWER_OFF; lcd->buffer = devm_kzalloc(&spi->dev, 8, GFP_KERNEL); if (!lcd->buffer) return -ENOMEM; @@ -245,7 +244,7 @@ static int ltv350qv_probe(struct spi_device *spi) lcd->ld = ld; - ret = ltv350qv_power(lcd, FB_BLANK_UNBLANK); + ret = ltv350qv_power(lcd, LCD_POWER_ON); if (ret) return ret; @@ -258,7 +257,7 @@ static void ltv350qv_remove(struct spi_device *spi) { struct ltv350qv *lcd = spi_get_drvdata(spi); - ltv350qv_power(lcd, FB_BLANK_POWERDOWN); + ltv350qv_power(lcd, LCD_POWER_OFF); } #ifdef CONFIG_PM_SLEEP @@ -266,14 +265,14 @@ static int ltv350qv_suspend(struct device *dev) { struct ltv350qv *lcd = dev_get_drvdata(dev); - return ltv350qv_power(lcd, FB_BLANK_POWERDOWN); + return ltv350qv_power(lcd, LCD_POWER_OFF); } static int ltv350qv_resume(struct device *dev) { struct ltv350qv *lcd = dev_get_drvdata(dev); - return ltv350qv_power(lcd, FB_BLANK_UNBLANK); + return ltv350qv_power(lcd, LCD_POWER_ON); } #endif @@ -284,7 +283,7 @@ static void ltv350qv_shutdown(struct spi_device *spi) { struct ltv350qv *lcd = spi_get_drvdata(spi); - ltv350qv_power(lcd, FB_BLANK_POWERDOWN); + ltv350qv_power(lcd, LCD_POWER_OFF); } static struct spi_driver ltv350qv_driver = { diff --git a/drivers/video/backlight/lv5207lp.c b/drivers/video/backlight/lv5207lp.c index 5f60989fa70f..a205f004eab2 100644 --- a/drivers/video/backlight/lv5207lp.c +++ b/drivers/video/backlight/lv5207lp.c @@ -9,7 +9,6 @@ #include <linux/backlight.h> #include <linux/err.h> -#include <linux/fb.h> #include <linux/i2c.h> #include <linux/module.h> #include <linux/platform_data/lv5207lp.h> diff --git a/drivers/video/backlight/max8925_bl.c b/drivers/video/backlight/max8925_bl.c index e607ec6fd4bf..4ac20a59e007 100644 --- a/drivers/video/backlight/max8925_bl.c +++ b/drivers/video/backlight/max8925_bl.c @@ -9,7 +9,6 @@ #include <linux/init.h> #include <linux/kernel.h> #include <linux/platform_device.h> -#include <linux/fb.h> #include <linux/i2c.h> #include <linux/backlight.h> #include <linux/mfd/max8925.h> diff --git a/drivers/video/backlight/mt6370-backlight.c b/drivers/video/backlight/mt6370-backlight.c index 94422c956453..e55f26888d0f 100644 --- a/drivers/video/backlight/mt6370-backlight.c +++ b/drivers/video/backlight/mt6370-backlight.c @@ -340,7 +340,7 @@ static struct platform_driver mt6370_bl_driver = { .of_match_table = mt6370_bl_of_match, }, .probe = mt6370_bl_probe, - .remove_new = mt6370_bl_remove, + .remove = mt6370_bl_remove, }; module_platform_driver(mt6370_bl_driver); diff --git a/drivers/video/backlight/otm3225a.c b/drivers/video/backlight/otm3225a.c index efe52fa08b07..5c6575f23ea8 100644 --- a/drivers/video/backlight/otm3225a.c +++ b/drivers/video/backlight/otm3225a.c @@ -189,7 +189,7 @@ static int otm3225a_set_power(struct lcd_device *ld, int power) if (power == dd->power) return 0; - if (power > FB_BLANK_UNBLANK) + if (power > LCD_POWER_ON) otm3225a_write(dd->spi, display_off, ARRAY_SIZE(display_off)); else otm3225a_write(dd->spi, display_on, ARRAY_SIZE(display_on)); diff --git a/drivers/video/backlight/pcf50633-backlight.c b/drivers/video/backlight/pcf50633-backlight.c deleted file mode 100644 index 157be2f366df..000000000000 --- a/drivers/video/backlight/pcf50633-backlight.c +++ /dev/null @@ -1,154 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-or-later -/* - * Copyright (C) 2009-2010, Lars-Peter Clausen <lars@metafoo.de> - * PCF50633 backlight device driver - */ - -#include <linux/kernel.h> -#include <linux/module.h> -#include <linux/slab.h> -#include <linux/platform_device.h> - -#include <linux/backlight.h> - -#include <linux/mfd/pcf50633/core.h> -#include <linux/mfd/pcf50633/backlight.h> - -struct pcf50633_bl { - struct pcf50633 *pcf; - struct backlight_device *bl; - - unsigned int brightness; - unsigned int brightness_limit; -}; - -/* - * pcf50633_bl_set_brightness_limit - * - * Update the brightness limit for the pc50633 backlight. The actual brightness - * will not go above the limit. This is useful to limit power drain for example - * on low battery. - * - * @dev: Pointer to a pcf50633 device - * @limit: The brightness limit. Valid values are 0-63 - */ -int pcf50633_bl_set_brightness_limit(struct pcf50633 *pcf, unsigned int limit) -{ - struct pcf50633_bl *pcf_bl = platform_get_drvdata(pcf->bl_pdev); - - if (!pcf_bl) - return -ENODEV; - - pcf_bl->brightness_limit = limit & 0x3f; - backlight_update_status(pcf_bl->bl); - - return 0; -} - -static int pcf50633_bl_update_status(struct backlight_device *bl) -{ - struct pcf50633_bl *pcf_bl = bl_get_data(bl); - unsigned int new_brightness; - - - if (bl->props.state & (BL_CORE_SUSPENDED | BL_CORE_FBBLANK) || - bl->props.power != BACKLIGHT_POWER_ON) - new_brightness = 0; - else if (bl->props.brightness < pcf_bl->brightness_limit) - new_brightness = bl->props.brightness; - else - new_brightness = pcf_bl->brightness_limit; - - - if (pcf_bl->brightness == new_brightness) - return 0; - - if (new_brightness) { - pcf50633_reg_write(pcf_bl->pcf, PCF50633_REG_LEDOUT, - new_brightness); - if (!pcf_bl->brightness) - pcf50633_reg_write(pcf_bl->pcf, PCF50633_REG_LEDENA, 1); - } else { - pcf50633_reg_write(pcf_bl->pcf, PCF50633_REG_LEDENA, 0); - } - - pcf_bl->brightness = new_brightness; - - return 0; -} - -static int pcf50633_bl_get_brightness(struct backlight_device *bl) -{ - struct pcf50633_bl *pcf_bl = bl_get_data(bl); - - return pcf_bl->brightness; -} - -static const struct backlight_ops pcf50633_bl_ops = { - .get_brightness = pcf50633_bl_get_brightness, - .update_status = pcf50633_bl_update_status, - .options = BL_CORE_SUSPENDRESUME, -}; - -static int pcf50633_bl_probe(struct platform_device *pdev) -{ - struct pcf50633_bl *pcf_bl; - struct device *parent = pdev->dev.parent; - struct pcf50633_platform_data *pcf50633_data = dev_get_platdata(parent); - struct pcf50633_bl_platform_data *pdata = pcf50633_data->backlight_data; - struct backlight_properties bl_props; - - pcf_bl = devm_kzalloc(&pdev->dev, sizeof(*pcf_bl), GFP_KERNEL); - if (!pcf_bl) - return -ENOMEM; - - memset(&bl_props, 0, sizeof(bl_props)); - bl_props.type = BACKLIGHT_RAW; - bl_props.max_brightness = 0x3f; - bl_props.power = BACKLIGHT_POWER_ON; - - if (pdata) { - bl_props.brightness = pdata->default_brightness; - pcf_bl->brightness_limit = pdata->default_brightness_limit; - } else { - bl_props.brightness = 0x3f; - pcf_bl->brightness_limit = 0x3f; - } - - pcf_bl->pcf = dev_to_pcf50633(pdev->dev.parent); - - pcf_bl->bl = devm_backlight_device_register(&pdev->dev, pdev->name, - &pdev->dev, pcf_bl, - &pcf50633_bl_ops, &bl_props); - - if (IS_ERR(pcf_bl->bl)) - return PTR_ERR(pcf_bl->bl); - - platform_set_drvdata(pdev, pcf_bl); - - pcf50633_reg_write(pcf_bl->pcf, PCF50633_REG_LEDDIM, pdata->ramp_time); - - /* - * Should be different from bl_props.brightness, so we do not exit - * update_status early the first time it's called - */ - pcf_bl->brightness = pcf_bl->bl->props.brightness + 1; - - backlight_update_status(pcf_bl->bl); - - return 0; -} - -static struct platform_driver pcf50633_bl_driver = { - .probe = pcf50633_bl_probe, - .driver = { - .name = "pcf50633-backlight", - }, -}; - -module_platform_driver(pcf50633_bl_driver); - -MODULE_AUTHOR("Lars-Peter Clausen <lars@metafoo.de>"); -MODULE_DESCRIPTION("PCF50633 backlight driver"); -MODULE_LICENSE("GPL"); -MODULE_ALIAS("platform:pcf50633-backlight"); diff --git a/drivers/video/backlight/platform_lcd.c b/drivers/video/backlight/platform_lcd.c index b0af612834a7..c9fe50f4d8ed 100644 --- a/drivers/video/backlight/platform_lcd.c +++ b/drivers/video/backlight/platform_lcd.c @@ -9,8 +9,6 @@ #include <linux/module.h> #include <linux/platform_device.h> -#include <linux/fb.h> -#include <linux/backlight.h> #include <linux/lcd.h> #include <linux/slab.h> @@ -42,7 +40,7 @@ static int platform_lcd_set_power(struct lcd_device *lcd, int power) struct platform_lcd *plcd = to_our_lcd(lcd); int lcd_power = 1; - if (power == FB_BLANK_POWERDOWN || plcd->suspended) + if (power == LCD_POWER_OFF || plcd->suspended) lcd_power = 0; plcd->pdata->set_power(plcd->pdata, lcd_power); @@ -51,21 +49,17 @@ static int platform_lcd_set_power(struct lcd_device *lcd, int power) return 0; } -static int platform_lcd_match(struct lcd_device *lcd, struct fb_info *info) +static bool platform_lcd_controls_device(struct lcd_device *lcd, struct device *display_device) { struct platform_lcd *plcd = to_our_lcd(lcd); - struct plat_lcd_data *pdata = plcd->pdata; - if (pdata->match_fb) - return pdata->match_fb(pdata, info); - - return plcd->us->parent == info->device; + return plcd->us->parent == display_device; } static const struct lcd_ops platform_lcd_ops = { - .get_power = platform_lcd_get_power, - .set_power = platform_lcd_set_power, - .check_fb = platform_lcd_match, + .get_power = platform_lcd_get_power, + .set_power = platform_lcd_set_power, + .controls_device = platform_lcd_controls_device, }; static int platform_lcd_probe(struct platform_device *pdev) @@ -102,7 +96,7 @@ static int platform_lcd_probe(struct platform_device *pdev) } platform_set_drvdata(pdev, plcd); - platform_lcd_set_power(plcd->lcd, FB_BLANK_NORMAL); + platform_lcd_set_power(plcd->lcd, LCD_POWER_REDUCED); return 0; } diff --git a/drivers/video/backlight/pwm_bl.c b/drivers/video/backlight/pwm_bl.c index e942908d1275..237d3d3f3bb1 100644 --- a/drivers/video/backlight/pwm_bl.c +++ b/drivers/video/backlight/pwm_bl.c @@ -697,7 +697,7 @@ static struct platform_driver pwm_backlight_driver = { .of_match_table = of_match_ptr(pwm_backlight_of_match), }, .probe = pwm_backlight_probe, - .remove_new = pwm_backlight_remove, + .remove = pwm_backlight_remove, .shutdown = pwm_backlight_shutdown, }; diff --git a/drivers/video/backlight/qcom-wled.c b/drivers/video/backlight/qcom-wled.c index 10129095a4c1..a63bb42c8f8b 100644 --- a/drivers/video/backlight/qcom-wled.c +++ b/drivers/video/backlight/qcom-wled.c @@ -1406,9 +1406,11 @@ static int wled_configure(struct wled *wled) wled->ctrl_addr = be32_to_cpu(*prop_addr); rc = of_property_read_string(dev->of_node, "label", &wled->name); - if (rc) + if (rc) { wled->name = devm_kasprintf(dev, GFP_KERNEL, "%pOFn", dev->of_node); - + if (!wled->name) + return -ENOMEM; + } switch (wled->version) { case 3: u32_opts = wled3_opts; @@ -1741,7 +1743,7 @@ MODULE_DEVICE_TABLE(of, wled_match_table); static struct platform_driver wled_driver = { .probe = wled_probe, - .remove_new = wled_remove, + .remove = wled_remove, .driver = { .name = "qcom,wled", .of_match_table = wled_match_table, diff --git a/drivers/video/backlight/rt4831-backlight.c b/drivers/video/backlight/rt4831-backlight.c index c2f6fb29e1d0..7ead75929a43 100644 --- a/drivers/video/backlight/rt4831-backlight.c +++ b/drivers/video/backlight/rt4831-backlight.c @@ -224,7 +224,7 @@ static struct platform_driver rt4831_bl_driver = { .of_match_table = rt4831_bl_of_match, }, .probe = rt4831_bl_probe, - .remove_new = rt4831_bl_remove, + .remove = rt4831_bl_remove, }; module_platform_driver(rt4831_bl_driver); diff --git a/drivers/video/backlight/sky81452-backlight.c b/drivers/video/backlight/sky81452-backlight.c index 935043b67786..2749231f0385 100644 --- a/drivers/video/backlight/sky81452-backlight.c +++ b/drivers/video/backlight/sky81452-backlight.c @@ -337,7 +337,7 @@ static struct platform_driver sky81452_bl_driver = { .of_match_table = of_match_ptr(sky81452_bl_of_match), }, .probe = sky81452_bl_probe, - .remove_new = sky81452_bl_remove, + .remove = sky81452_bl_remove, }; module_platform_driver(sky81452_bl_driver); diff --git a/drivers/video/backlight/tdo24m.c b/drivers/video/backlight/tdo24m.c index c413b3c68e95..c04ee3d04d87 100644 --- a/drivers/video/backlight/tdo24m.c +++ b/drivers/video/backlight/tdo24m.c @@ -12,11 +12,10 @@ #include <linux/device.h> #include <linux/spi/spi.h> #include <linux/spi/tdo24m.h> -#include <linux/fb.h> #include <linux/lcd.h> #include <linux/slab.h> -#define POWER_IS_ON(pwr) ((pwr) <= FB_BLANK_NORMAL) +#define POWER_IS_ON(pwr) ((pwr) <= LCD_POWER_REDUCED) #define TDO24M_SPI_BUFF_SIZE (4) #define MODE_QVGA 0 @@ -308,12 +307,12 @@ static int tdo24m_get_power(struct lcd_device *ld) return lcd->power; } -static int tdo24m_set_mode(struct lcd_device *ld, struct fb_videomode *m) +static int tdo24m_set_mode(struct lcd_device *ld, u32 xres, u32 yres) { struct tdo24m *lcd = lcd_get_data(ld); int mode = MODE_QVGA; - if (m->xres == 640 || m->xres == 480) + if (xres == 640 || xres == 480) mode = MODE_VGA; if (lcd->mode == mode) @@ -354,7 +353,7 @@ static int tdo24m_probe(struct spi_device *spi) return -ENOMEM; lcd->spi_dev = spi; - lcd->power = FB_BLANK_POWERDOWN; + lcd->power = LCD_POWER_OFF; lcd->mode = MODE_VGA; /* default to VGA */ lcd->buf = devm_kzalloc(&spi->dev, TDO24M_SPI_BUFF_SIZE, GFP_KERNEL); @@ -390,7 +389,7 @@ static int tdo24m_probe(struct spi_device *spi) return PTR_ERR(lcd->lcd_dev); spi_set_drvdata(spi, lcd); - err = tdo24m_power(lcd, FB_BLANK_UNBLANK); + err = tdo24m_power(lcd, LCD_POWER_ON); if (err) return err; @@ -401,7 +400,7 @@ static void tdo24m_remove(struct spi_device *spi) { struct tdo24m *lcd = spi_get_drvdata(spi); - tdo24m_power(lcd, FB_BLANK_POWERDOWN); + tdo24m_power(lcd, LCD_POWER_OFF); } #ifdef CONFIG_PM_SLEEP @@ -409,14 +408,14 @@ static int tdo24m_suspend(struct device *dev) { struct tdo24m *lcd = dev_get_drvdata(dev); - return tdo24m_power(lcd, FB_BLANK_POWERDOWN); + return tdo24m_power(lcd, LCD_POWER_OFF); } static int tdo24m_resume(struct device *dev) { struct tdo24m *lcd = dev_get_drvdata(dev); - return tdo24m_power(lcd, FB_BLANK_UNBLANK); + return tdo24m_power(lcd, LCD_POWER_ON); } #endif @@ -427,7 +426,7 @@ static void tdo24m_shutdown(struct spi_device *spi) { struct tdo24m *lcd = spi_get_drvdata(spi); - tdo24m_power(lcd, FB_BLANK_POWERDOWN); + tdo24m_power(lcd, LCD_POWER_OFF); } static struct spi_driver tdo24m_driver = { diff --git a/drivers/video/backlight/tps65217_bl.c b/drivers/video/backlight/tps65217_bl.c index d96d713fe7db..8aa860350644 100644 --- a/drivers/video/backlight/tps65217_bl.c +++ b/drivers/video/backlight/tps65217_bl.c @@ -11,7 +11,6 @@ #include <linux/kernel.h> #include <linux/backlight.h> #include <linux/err.h> -#include <linux/fb.h> #include <linux/mfd/tps65217.h> #include <linux/module.h> #include <linux/platform_device.h> diff --git a/drivers/video/backlight/vgg2432a4.c b/drivers/video/backlight/vgg2432a4.c index bfc1913e8b55..3005eba6c82c 100644 --- a/drivers/video/backlight/vgg2432a4.c +++ b/drivers/video/backlight/vgg2432a4.c @@ -10,7 +10,6 @@ #include <linux/delay.h> #include <linux/err.h> -#include <linux/fb.h> #include <linux/init.h> #include <linux/lcd.h> #include <linux/module.h> diff --git a/drivers/video/backlight/wm831x_bl.c b/drivers/video/backlight/wm831x_bl.c index c5aaee205bdf..49027f04a1ec 100644 --- a/drivers/video/backlight/wm831x_bl.c +++ b/drivers/video/backlight/wm831x_bl.c @@ -9,7 +9,6 @@ #include <linux/init.h> #include <linux/platform_device.h> #include <linux/module.h> -#include <linux/fb.h> #include <linux/backlight.h> #include <linux/slab.h> |