diff options
Diffstat (limited to 'drivers/usb/gadget')
| -rw-r--r-- | drivers/usb/gadget/Kconfig | 461 | ||||
| -rw-r--r-- | drivers/usb/gadget/Makefile | 44 | ||||
| -rw-r--r-- | drivers/usb/gadget/legacy/Kconfig | 475 | ||||
| -rw-r--r-- | drivers/usb/gadget/legacy/Makefile | 42 | ||||
| -rw-r--r-- | drivers/usb/gadget/legacy/acm_ms.c (renamed from drivers/usb/gadget/acm_ms.c) | 0 | ||||
| -rw-r--r-- | drivers/usb/gadget/legacy/audio.c (renamed from drivers/usb/gadget/audio.c) | 0 | ||||
| -rw-r--r-- | drivers/usb/gadget/legacy/cdc2.c (renamed from drivers/usb/gadget/cdc2.c) | 0 | ||||
| -rw-r--r-- | drivers/usb/gadget/legacy/dbgp.c (renamed from drivers/usb/gadget/dbgp.c) | 0 | ||||
| -rw-r--r-- | drivers/usb/gadget/legacy/ether.c (renamed from drivers/usb/gadget/ether.c) | 0 | ||||
| -rw-r--r-- | drivers/usb/gadget/legacy/g_ffs.c (renamed from drivers/usb/gadget/g_ffs.c) | 0 | ||||
| -rw-r--r-- | drivers/usb/gadget/legacy/gmidi.c (renamed from drivers/usb/gadget/gmidi.c) | 0 | ||||
| -rw-r--r-- | drivers/usb/gadget/legacy/hid.c (renamed from drivers/usb/gadget/hid.c) | 0 | ||||
| -rw-r--r-- | drivers/usb/gadget/legacy/inode.c (renamed from drivers/usb/gadget/inode.c) | 0 | ||||
| -rw-r--r-- | drivers/usb/gadget/legacy/mass_storage.c (renamed from drivers/usb/gadget/mass_storage.c) | 0 | ||||
| -rw-r--r-- | drivers/usb/gadget/legacy/multi.c (renamed from drivers/usb/gadget/multi.c) | 0 | ||||
| -rw-r--r-- | drivers/usb/gadget/legacy/ncm.c (renamed from drivers/usb/gadget/ncm.c) | 0 | ||||
| -rw-r--r-- | drivers/usb/gadget/legacy/nokia.c (renamed from drivers/usb/gadget/nokia.c) | 0 | ||||
| -rw-r--r-- | drivers/usb/gadget/legacy/printer.c (renamed from drivers/usb/gadget/printer.c) | 0 | ||||
| -rw-r--r-- | drivers/usb/gadget/legacy/serial.c (renamed from drivers/usb/gadget/serial.c) | 0 | ||||
| -rw-r--r-- | drivers/usb/gadget/legacy/tcm_usb_gadget.c (renamed from drivers/usb/gadget/tcm_usb_gadget.c) | 0 | ||||
| -rw-r--r-- | drivers/usb/gadget/legacy/tcm_usb_gadget.h (renamed from drivers/usb/gadget/tcm_usb_gadget.h) | 0 | ||||
| -rw-r--r-- | drivers/usb/gadget/legacy/webcam.c (renamed from drivers/usb/gadget/webcam.c) | 0 | ||||
| -rw-r--r-- | drivers/usb/gadget/legacy/zero.c (renamed from drivers/usb/gadget/zero.c) | 0 |
23 files changed, 521 insertions, 501 deletions
diff --git a/drivers/usb/gadget/Kconfig b/drivers/usb/gadget/Kconfig index 49e434ec527d..2986a4369df4 100644 --- a/drivers/usb/gadget/Kconfig +++ b/drivers/usb/gadget/Kconfig @@ -722,466 +722,7 @@ config USB_CONFIGFS_F_FS implemented in kernel space (for instance Ethernet, serial or mass storage) and other are implemented in user space. -config USB_ZERO - tristate "Gadget Zero (DEVELOPMENT)" - select USB_LIBCOMPOSITE - select USB_F_SS_LB - help - Gadget Zero is a two-configuration device. It either sinks and - sources bulk data; or it loops back a configurable number of - transfers. It also implements control requests, for "chapter 9" - conformance. The driver needs only two bulk-capable endpoints, so - it can work on top of most device-side usb controllers. It's - useful for testing, and is also a working example showing how - USB "gadget drivers" can be written. - - Make this be the first driver you try using on top of any new - USB peripheral controller driver. Then you can use host-side - test software, like the "usbtest" driver, to put your hardware - and its driver through a basic set of functional tests. - - Gadget Zero also works with the host-side "usb-skeleton" driver, - and with many kinds of host-side test software. You may need - to tweak product and vendor IDs before host software knows about - this device, and arrange to select an appropriate configuration. - - Say "y" to link the driver statically, or "m" to build a - dynamically linked module called "g_zero". - -config USB_ZERO_HNPTEST - boolean "HNP Test Device" - depends on USB_ZERO && USB_OTG - help - You can configure this device to enumerate using the device - identifiers of the USB-OTG test device. That means that when - this gadget connects to another OTG device, with this one using - the "B-Peripheral" role, that device will use HNP to let this - one serve as the USB host instead (in the "B-Host" role). - -config USB_AUDIO - tristate "Audio Gadget" - depends on SND - select USB_LIBCOMPOSITE - select SND_PCM - help - This Gadget Audio driver is compatible with USB Audio Class - specification 2.0. It implements 1 AudioControl interface, - 1 AudioStreaming Interface each for USB-OUT and USB-IN. - Number of channels, sample rate and sample size can be - specified as module parameters. - This driver doesn't expect any real Audio codec to be present - on the device - the audio streams are simply sinked to and - sourced from a virtual ALSA sound card created. The user-space - application may choose to do whatever it wants with the data - received from the USB Host and choose to provide whatever it - wants as audio data to the USB Host. - - Say "y" to link the driver statically, or "m" to build a - dynamically linked module called "g_audio". - -config GADGET_UAC1 - bool "UAC 1.0 (Legacy)" - depends on USB_AUDIO - help - If you instead want older UAC Spec-1.0 driver that also has audio - paths hardwired to the Audio codec chip on-board and doesn't work - without one. - -config USB_ETH - tristate "Ethernet Gadget (with CDC Ethernet support)" - depends on NET - select USB_LIBCOMPOSITE - select USB_U_ETHER - select USB_F_ECM - select USB_F_SUBSET - select CRC32 - help - This driver implements Ethernet style communication, in one of - several ways: - - - The "Communication Device Class" (CDC) Ethernet Control Model. - That protocol is often avoided with pure Ethernet adapters, in - favor of simpler vendor-specific hardware, but is widely - supported by firmware for smart network devices. - - - On hardware can't implement that protocol, a simple CDC subset - is used, placing fewer demands on USB. - - - CDC Ethernet Emulation Model (EEM) is a newer standard that has - a simpler interface that can be used by more USB hardware. - - RNDIS support is an additional option, more demanding than than - subset. - - Within the USB device, this gadget driver exposes a network device - "usbX", where X depends on what other networking devices you have. - Treat it like a two-node Ethernet link: host, and gadget. - - The Linux-USB host-side "usbnet" driver interoperates with this - driver, so that deep I/O queues can be supported. On 2.4 kernels, - use "CDCEther" instead, if you're using the CDC option. That CDC - mode should also interoperate with standard CDC Ethernet class - drivers on other host operating systems. - - Say "y" to link the driver statically, or "m" to build a - dynamically linked module called "g_ether". - -config USB_ETH_RNDIS - bool "RNDIS support" - depends on USB_ETH - select USB_LIBCOMPOSITE - select USB_F_RNDIS - default y - help - Microsoft Windows XP bundles the "Remote NDIS" (RNDIS) protocol, - and Microsoft provides redistributable binary RNDIS drivers for - older versions of Windows. - - If you say "y" here, the Ethernet gadget driver will try to provide - a second device configuration, supporting RNDIS to talk to such - Microsoft USB hosts. - - To make MS-Windows work with this, use Documentation/usb/linux.inf - as the "driver info file". For versions of MS-Windows older than - XP, you'll need to download drivers from Microsoft's website; a URL - is given in comments found in that info file. - -config USB_ETH_EEM - bool "Ethernet Emulation Model (EEM) support" - depends on USB_ETH - select USB_LIBCOMPOSITE - select USB_F_EEM - default n - help - CDC EEM is a newer USB standard that is somewhat simpler than CDC ECM - and therefore can be supported by more hardware. Technically ECM and - EEM are designed for different applications. The ECM model extends - the network interface to the target (e.g. a USB cable modem), and the - EEM model is for mobile devices to communicate with hosts using - ethernet over USB. For Linux gadgets, however, the interface with - the host is the same (a usbX device), so the differences are minimal. - - If you say "y" here, the Ethernet gadget driver will use the EEM - protocol rather than ECM. If unsure, say "n". - -config USB_G_NCM - tristate "Network Control Model (NCM) support" - depends on NET - select USB_LIBCOMPOSITE - select USB_U_ETHER - select USB_F_NCM - select CRC32 - help - This driver implements USB CDC NCM subclass standard. NCM is - an advanced protocol for Ethernet encapsulation, allows grouping - of several ethernet frames into one USB transfer and different - alignment possibilities. - - Say "y" to link the driver statically, or "m" to build a - dynamically linked module called "g_ncm". - -config USB_GADGETFS - tristate "Gadget Filesystem" - help - This driver provides a filesystem based API that lets user mode - programs implement a single-configuration USB device, including - endpoint I/O and control requests that don't relate to enumeration. - All endpoints, transfer speeds, and transfer types supported by - the hardware are available, through read() and write() calls. - - Say "y" to link the driver statically, or "m" to build a - dynamically linked module called "gadgetfs". - -config USB_FUNCTIONFS - tristate "Function Filesystem" - select USB_LIBCOMPOSITE - select USB_F_FS - select USB_FUNCTIONFS_GENERIC if !(USB_FUNCTIONFS_ETH || USB_FUNCTIONFS_RNDIS) - help - The Function Filesystem (FunctionFS) lets one create USB - composite functions in user space in the same way GadgetFS - lets one create USB gadgets in user space. This allows creation - of composite gadgets such that some of the functions are - implemented in kernel space (for instance Ethernet, serial or - mass storage) and other are implemented in user space. - - If you say "y" or "m" here you will be able what kind of - configurations the gadget will provide. - - Say "y" to link the driver statically, or "m" to build - a dynamically linked module called "g_ffs". - -config USB_FUNCTIONFS_ETH - bool "Include configuration with CDC ECM (Ethernet)" - depends on USB_FUNCTIONFS && NET - select USB_U_ETHER - select USB_F_ECM - select USB_F_SUBSET - help - Include a configuration with CDC ECM function (Ethernet) and the - Function Filesystem. - -config USB_FUNCTIONFS_RNDIS - bool "Include configuration with RNDIS (Ethernet)" - depends on USB_FUNCTIONFS && NET - select USB_U_ETHER - select USB_F_RNDIS - help - Include a configuration with RNDIS function (Ethernet) and the Filesystem. - -config USB_FUNCTIONFS_GENERIC - bool "Include 'pure' configuration" - depends on USB_FUNCTIONFS - help - Include a configuration with the Function Filesystem alone with - no Ethernet interface. - -config USB_MASS_STORAGE - tristate "Mass Storage Gadget" - depends on BLOCK - select USB_LIBCOMPOSITE - select USB_F_MASS_STORAGE - help - The Mass Storage Gadget acts as a USB Mass Storage disk drive. - As its storage repository it can use a regular file or a block - device (in much the same way as the "loop" device driver), - specified as a module parameter or sysfs option. - - This driver is a replacement for now removed File-backed - Storage Gadget (g_file_storage). - - Say "y" to link the driver statically, or "m" to build - a dynamically linked module called "g_mass_storage". - -config USB_GADGET_TARGET - tristate "USB Gadget Target Fabric Module" - depends on TARGET_CORE - select USB_LIBCOMPOSITE - help - This fabric is an USB gadget. Two USB protocols are supported that is - BBB or BOT (Bulk Only Transport) and UAS (USB Attached SCSI). BOT is - advertised on alternative interface 0 (primary) and UAS is on - alternative interface 1. Both protocols can work on USB2.0 and USB3.0. - UAS utilizes the USB 3.0 feature called streams support. - -config USB_G_SERIAL - tristate "Serial Gadget (with CDC ACM and CDC OBEX support)" - depends on TTY - select USB_U_SERIAL - select USB_F_ACM - select USB_F_SERIAL - select USB_F_OBEX - select USB_LIBCOMPOSITE - help - The Serial Gadget talks to the Linux-USB generic serial driver. - This driver supports a CDC-ACM module option, which can be used - to interoperate with MS-Windows hosts or with the Linux-USB - "cdc-acm" driver. - - This driver also supports a CDC-OBEX option. You will need a - user space OBEX server talking to /dev/ttyGS*, since the kernel - itself doesn't implement the OBEX protocol. - - Say "y" to link the driver statically, or "m" to build a - dynamically linked module called "g_serial". - - For more information, see Documentation/usb/gadget_serial.txt - which includes instructions and a "driver info file" needed to - make MS-Windows work with CDC ACM. - -config USB_MIDI_GADGET - tristate "MIDI Gadget" - depends on SND - select USB_LIBCOMPOSITE - select SND_RAWMIDI - help - The MIDI Gadget acts as a USB Audio device, with one MIDI - input and one MIDI output. These MIDI jacks appear as - a sound "card" in the ALSA sound system. Other MIDI - connections can then be made on the gadget system, using - ALSA's aconnect utility etc. - - Say "y" to link the driver statically, or "m" to build a - dynamically linked module called "g_midi". - -config USB_G_PRINTER - tristate "Printer Gadget" - select USB_LIBCOMPOSITE - help - The Printer Gadget channels data between the USB host and a - userspace program driving the print engine. The user space - program reads and writes the device file /dev/g_printer to - receive or send printer data. It can use ioctl calls to - the device file to get or set printer status. - - Say "y" to link the driver statically, or "m" to build a - dynamically linked module called "g_printer". - - For more information, see Documentation/usb/gadget_printer.txt - which includes sample code for accessing the device file. - -if TTY - -config USB_CDC_COMPOSITE - tristate "CDC Composite Device (Ethernet and ACM)" - depends on NET - select USB_LIBCOMPOSITE - select USB_U_SERIAL - select USB_U_ETHER - select USB_F_ACM - select USB_F_ECM - help - This driver provides two functions in one configuration: - a CDC Ethernet (ECM) link, and a CDC ACM (serial port) link. - - This driver requires four bulk and two interrupt endpoints, - plus the ability to handle altsettings. Not all peripheral - controllers are that capable. - - Say "y" to link the driver statically, or "m" to build a - dynamically linked module. - -config USB_G_NOKIA - tristate "Nokia composite gadget" - depends on PHONET - select USB_LIBCOMPOSITE - select USB_U_SERIAL - select USB_U_ETHER - select USB_F_ACM - select USB_F_OBEX - select USB_F_PHONET - select USB_F_ECM - help - The Nokia composite gadget provides support for acm, obex - and phonet in only one composite gadget driver. - - It's only really useful for N900 hardware. If you're building - a kernel for N900, say Y or M here. If unsure, say N. - -config USB_G_ACM_MS - tristate "CDC Composite Device (ACM and mass storage)" - depends on BLOCK - select USB_LIBCOMPOSITE - select USB_U_SERIAL - select USB_F_ACM - select USB_F_MASS_STORAGE - help - This driver provides two functions in one configuration: - a mass storage, and a CDC ACM (serial port) link. - - Say "y" to link the driver statically, or "m" to build a - dynamically linked module called "g_acm_ms". - -config USB_G_MULTI - tristate "Multifunction Composite Gadget" - depends on BLOCK && NET - select USB_G_MULTI_CDC if !USB_G_MULTI_RNDIS - select USB_LIBCOMPOSITE - select USB_U_SERIAL - select USB_U_ETHER - select USB_F_ACM - select USB_F_MASS_STORAGE - help - The Multifunction Composite Gadget provides Ethernet (RNDIS - and/or CDC Ethernet), mass storage and ACM serial link - interfaces. - - You will be asked to choose which of the two configurations is - to be available in the gadget. At least one configuration must - be chosen to make the gadget usable. Selecting more than one - configuration will prevent Windows from automatically detecting - the gadget as a composite gadget, so an INF file will be needed to - use the gadget. - - Say "y" to link the driver statically, or "m" to build a - dynamically linked module called "g_multi". - -config USB_G_MULTI_RNDIS - bool "RNDIS + CDC Serial + Storage configuration" - depends on USB_G_MULTI - select USB_F_RNDIS - default y - help - This option enables a configuration with RNDIS, CDC Serial and - Mass Storage functions available in the Multifunction Composite - Gadget. This is the configuration dedicated for Windows since RNDIS - is Microsoft's protocol. - - If unsure, say "y". - -config USB_G_MULTI_CDC - bool "CDC Ethernet + CDC Serial + Storage configuration" - depends on USB_G_MULTI - default n - select USB_F_ECM - help - This option enables a configuration with CDC Ethernet (ECM), CDC - Serial and Mass Storage functions available in the Multifunction - Composite Gadget. - - If unsure, say "y". - -endif # TTY - -config USB_G_HID - tristate "HID Gadget" - select USB_LIBCOMPOSITE - help - The HID gadget driver provides generic emulation of USB - Human Interface Devices (HID). - - For more information, see Documentation/usb/gadget_hid.txt which - includes sample code for accessing the device files. - - Say "y" to link the driver statically, or "m" to build a - dynamically linked module called "g_hid". - -# Standalone / single function gadgets -config USB_G_DBGP - tristate "EHCI Debug Device Gadget" - depends on TTY - select USB_LIBCOMPOSITE - help - This gadget emulates an EHCI Debug device. This is useful when you want - to interact with an EHCI Debug Port. - - Say "y" to link the driver statically, or "m" to build a - dynamically linked module called "g_dbgp". - -if USB_G_DBGP -choice - prompt "EHCI Debug Device mode" - default USB_G_DBGP_SERIAL - -config USB_G_DBGP_PRINTK - depends on USB_G_DBGP - bool "printk" - help - Directly printk() received data. No interaction. - -config USB_G_DBGP_SERIAL - depends on USB_G_DBGP - select USB_U_SERIAL - bool "serial" - help - Userland can interact using /dev/ttyGSxxx. -endchoice -endif - -# put drivers that need isochronous transfer support (for audio -# or video class gadget drivers), or specific hardware, here. -config USB_G_WEBCAM - tristate "USB Webcam Gadget" - depends on VIDEO_DEV - select USB_LIBCOMPOSITE - select VIDEOBUF2_VMALLOC - help - The Webcam Gadget acts as a composite USB Audio and Video Class - device. It provides a userspace API to process UVC control requests - and stream video data to the host. - - Say "y" to link the driver statically, or "m" to build a - dynamically linked module called "g_webcam". +source "drivers/usb/gadget/legacy/Kconfig" endchoice diff --git a/drivers/usb/gadget/Makefile b/drivers/usb/gadget/Makefile index 49514ea60a98..61d2503ef561 100644 --- a/drivers/usb/gadget/Makefile +++ b/drivers/usb/gadget/Makefile @@ -1,8 +1,8 @@ # # USB peripheral controller drivers # -ccflags-$(CONFIG_USB_GADGET_DEBUG) := -DDEBUG -ccflags-$(CONFIG_USB_GADGET_VERBOSE) += -DVERBOSE_DEBUG +subdir-ccflags-$(CONFIG_USB_GADGET_DEBUG) := -DDEBUG +subdir-ccflags-$(CONFIG_USB_GADGET_VERBOSE) += -DVERBOSE_DEBUG obj-$(CONFIG_USB_GADGET) += udc-core.o obj-$(CONFIG_USB_LIBCOMPOSITE) += libcomposite.o @@ -64,42 +64,4 @@ obj-$(CONFIG_USB_F_MASS_STORAGE)+= usb_f_mass_storage.o usb_f_fs-y := f_fs.o obj-$(CONFIG_USB_F_FS) += usb_f_fs.o -# -# USB gadget drivers -# -g_zero-y := zero.o -g_audio-y := audio.o -g_ether-y := ether.o -g_serial-y := serial.o -g_midi-y := gmidi.o -gadgetfs-y := inode.o -g_mass_storage-y := mass_storage.o -g_printer-y := printer.o -g_cdc-y := cdc2.o -g_multi-y := multi.o -g_hid-y := hid.o -g_dbgp-y := dbgp.o -g_nokia-y := nokia.o -g_webcam-y := webcam.o -g_ncm-y := ncm.o -g_acm_ms-y := acm_ms.o -g_tcm_usb_gadget-y := tcm_usb_gadget.o - -obj-$(CONFIG_USB_ZERO) += g_zero.o -obj-$(CONFIG_USB_AUDIO) += g_audio.o -obj-$(CONFIG_USB_ETH) += g_ether.o -obj-$(CONFIG_USB_GADGETFS) += gadgetfs.o -obj-$(CONFIG_USB_FUNCTIONFS) += g_ffs.o -obj-$(CONFIG_USB_MASS_STORAGE) += g_mass_storage.o -obj-$(CONFIG_USB_G_SERIAL) += g_serial.o -obj-$(CONFIG_USB_G_PRINTER) += g_printer.o -obj-$(CONFIG_USB_MIDI_GADGET) += g_midi.o -obj-$(CONFIG_USB_CDC_COMPOSITE) += g_cdc.o -obj-$(CONFIG_USB_G_HID) += g_hid.o -obj-$(CONFIG_USB_G_DBGP) += g_dbgp.o -obj-$(CONFIG_USB_G_MULTI) += g_multi.o -obj-$(CONFIG_USB_G_NOKIA) += g_nokia.o -obj-$(CONFIG_USB_G_WEBCAM) += g_webcam.o -obj-$(CONFIG_USB_G_NCM) += g_ncm.o -obj-$(CONFIG_USB_G_ACM_MS) += g_acm_ms.o -obj-$(CONFIG_USB_GADGET_TARGET) += tcm_usb_gadget.o +obj-$(CONFIG_USB_GADGET) += legacy/ diff --git a/drivers/usb/gadget/legacy/Kconfig b/drivers/usb/gadget/legacy/Kconfig new file mode 100644 index 000000000000..aa376f006333 --- /dev/null +++ b/drivers/usb/gadget/legacy/Kconfig @@ -0,0 +1,475 @@ +# +# USB Gadget support on a system involves +# (a) a peripheral controller, and +# (b) the gadget driver using it. +# +# NOTE: Gadget support ** DOES NOT ** depend on host-side CONFIG_USB !! +# +# - Host systems (like PCs) need CONFIG_USB (with "A" jacks). +# - Peripherals (like PDAs) need CONFIG_USB_GADGET (with "B" jacks). +# - Some systems have both kinds of controllers. +# +# With help from a special transceiver and a "Mini-AB" jack, systems with +# both kinds of controller can also support "USB On-the-Go" (CONFIG_USB_OTG). +# + +config USB_ZERO + tristate "Gadget Zero (DEVELOPMENT)" + select USB_LIBCOMPOSITE + select USB_F_SS_LB + help + Gadget Zero is a two-configuration device. It either sinks and + sources bulk data; or it loops back a configurable number of + transfers. It also implements control requests, for "chapter 9" + conformance. The driver needs only two bulk-capable endpoints, so + it can work on top of most device-side usb controllers. It's + useful for testing, and is also a working example showing how + USB "gadget drivers" can be written. + + Make this be the first driver you try using on top of any new + USB peripheral controller driver. Then you can use host-side + test software, like the "usbtest" driver, to put your hardware + and its driver through a basic set of functional tests. + + Gadget Zero also works with the host-side "usb-skeleton" driver, + and with many kinds of host-side test software. You may need + to tweak product and vendor IDs before host software knows about + this device, and arrange to select an appropriate configuration. + + Say "y" to link the driver statically, or "m" to build a + dynamically linked module called "g_zero". + +config USB_ZERO_HNPTEST + boolean "HNP Test Device" + depends on USB_ZERO && USB_OTG + help + You can configure this device to enumerate using the device + identifiers of the USB-OTG test device. That means that when + this gadget connects to another OTG device, with this one using + the "B-Peripheral" role, that device will use HNP to let this + one serve as the USB host instead (in the "B-Host" role). + +config USB_AUDIO + tristate "Audio Gadget" + depends on SND + select USB_LIBCOMPOSITE + select SND_PCM + help + This Gadget Audio driver is compatible with USB Audio Class + specification 2.0. It implements 1 AudioControl interface, + 1 AudioStreaming Interface each for USB-OUT and USB-IN. + Number of channels, sample rate and sample size can be + specified as module parameters. + This driver doesn't expect any real Audio codec to be present + on the device - the audio streams are simply sinked to and + sourced from a virtual ALSA sound card created. The user-space + application may choose to do whatever it wants with the data + received from the USB Host and choose to provide whatever it + wants as audio data to the USB Host. + + Say "y" to link the driver statically, or "m" to build a + dynamically linked module called "g_audio". + +config GADGET_UAC1 + bool "UAC 1.0 (Legacy)" + depends on USB_AUDIO + help + If you instead want older UAC Spec-1.0 driver that also has audio + paths hardwired to the Audio codec chip on-board and doesn't work + without one. + +config USB_ETH + tristate "Ethernet Gadget (with CDC Ethernet support)" + depends on NET + select USB_LIBCOMPOSITE + select USB_U_ETHER + select USB_F_ECM + select USB_F_SUBSET + select CRC32 + help + This driver implements Ethernet style communication, in one of + several ways: + + - The "Communication Device Class" (CDC) Ethernet Control Model. + That protocol is often avoided with pure Ethernet adapters, in + favor of simpler vendor-specific hardware, but is widely + supported by firmware for smart network devices. + + - On hardware can't implement that protocol, a simple CDC subset + is used, placing fewer demands on USB. + + - CDC Ethernet Emulation Model (EEM) is a newer standard that has + a simpler interface that can be used by more USB hardware. + + RNDIS support is an additional option, more demanding than than + subset. + + Within the USB device, this gadget driver exposes a network device + "usbX", where X depends on what other networking devices you have. + Treat it like a two-node Ethernet link: host, and gadget. + + The Linux-USB host-side "usbnet" driver interoperates with this + driver, so that deep I/O queues can be supported. On 2.4 kernels, + use "CDCEther" instead, if you're using the CDC option. That CDC + mode should also interoperate with standard CDC Ethernet class + drivers on other host operating systems. + + Say "y" to link the driver statically, or "m" to build a + dynamically linked module called "g_ether". + +config USB_ETH_RNDIS + bool "RNDIS support" + depends on USB_ETH + select USB_LIBCOMPOSITE + select USB_F_RNDIS + default y + help + Microsoft Windows XP bundles the "Remote NDIS" (RNDIS) protocol, + and Microsoft provides redistributable binary RNDIS drivers for + older versions of Windows. + + If you say "y" here, the Ethernet gadget driver will try to provide + a second device configuration, supporting RNDIS to talk to such + Microsoft USB hosts. + + To make MS-Windows work with this, use Documentation/usb/linux.inf + as the "driver info file". For versions of MS-Windows older than + XP, you'll need to download drivers from Microsoft's website; a URL + is given in comments found in that info file. + +config USB_ETH_EEM + bool "Ethernet Emulation Model (EEM) support" + depends on USB_ETH + select USB_LIBCOMPOSITE + select USB_F_EEM + default n + help + CDC EEM is a newer USB standard that is somewhat simpler than CDC ECM + and therefore can be supported by more hardware. Technically ECM and + EEM are designed for different applications. The ECM model extends + the network interface to the target (e.g. a USB cable modem), and the + EEM model is for mobile devices to communicate with hosts using + ethernet over USB. For Linux gadgets, however, the interface with + the host is the same (a usbX device), so the differences are minimal. + + If you say "y" here, the Ethernet gadget driver will use the EEM + protocol rather than ECM. If unsure, say "n". + +config USB_G_NCM + tristate "Network Control Model (NCM) support" + depends on NET + select USB_LIBCOMPOSITE + select USB_U_ETHER + select USB_F_NCM + select CRC32 + help + This driver implements USB CDC NCM subclass standard. NCM is + an advanced protocol for Ethernet encapsulation, allows grouping + of several ethernet frames into one USB transfer and different + alignment possibilities. + + Say "y" to link the driver statically, or "m" to build a + dynamically linked module called "g_ncm". + +config USB_GADGETFS + tristate "Gadget Filesystem" + help + This driver provides a filesystem based API that lets user mode + programs implement a single-configuration USB device, including + endpoint I/O and control requests that don't relate to enumeration. + All endpoints, transfer speeds, and transfer types supported by + the hardware are available, through read() and write() calls. + + Say "y" to link the driver statically, or "m" to build a + dynamically linked module called "gadgetfs". + +config USB_FUNCTIONFS + tristate "Function Filesystem" + select USB_LIBCOMPOSITE + select USB_F_FS + select USB_FUNCTIONFS_GENERIC if !(USB_FUNCTIONFS_ETH || USB_FUNCTIONFS_RNDIS) + help + The Function Filesystem (FunctionFS) lets one create USB + composite functions in user space in the same way GadgetFS + lets one create USB gadgets in user space. This allows creation + of composite gadgets such that some of the functions are + implemented in kernel space (for instance Ethernet, serial or + mass storage) and other are implemented in user space. + + If you say "y" or "m" here you will be able what kind of + configurations the gadget will provide. + + Say "y" to link the driver statically, or "m" to build + a dynamically linked module called "g_ffs". + +config USB_FUNCTIONFS_ETH + bool "Include configuration with CDC ECM (Ethernet)" + depends on USB_FUNCTIONFS && NET + select USB_U_ETHER + select USB_F_ECM + select USB_F_SUBSET + help + Include a configuration with CDC ECM function (Ethernet) and the + Function Filesystem. + +config USB_FUNCTIONFS_RNDIS + bool "Include configuration with RNDIS (Ethernet)" + depends on USB_FUNCTIONFS && NET + select USB_U_ETHER + select USB_F_RNDIS + help + Include a configuration with RNDIS function (Ethernet) and the Filesystem. + +config USB_FUNCTIONFS_GENERIC + bool "Include 'pure' configuration" + depends on USB_FUNCTIONFS + help + Include a configuration with the Function Filesystem alone with + no Ethernet interface. + +config USB_MASS_STORAGE + tristate "Mass Storage Gadget" + depends on BLOCK + select USB_LIBCOMPOSITE + select USB_F_MASS_STORAGE + help + The Mass Storage Gadget acts as a USB Mass Storage disk drive. + As its storage repository it can use a regular file or a block + device (in much the same way as the "loop" device driver), + specified as a module parameter or sysfs option. + + This driver is a replacement for now removed File-backed + Storage Gadget (g_file_storage). + + Say "y" to link the driver statically, or "m" to build + a dynamically linked module called "g_mass_storage". + +config USB_GADGET_TARGET + tristate "USB Gadget Target Fabric Module" + depends on TARGET_CORE + select USB_LIBCOMPOSITE + help + This fabric is an USB gadget. Two USB protocols are supported that is + BBB or BOT (Bulk Only Transport) and UAS (USB Attached SCSI). BOT is + advertised on alternative interface 0 (primary) and UAS is on + alternative interface 1. Both protocols can work on USB2.0 and USB3.0. + UAS utilizes the USB 3.0 feature called streams support. + +config USB_G_SERIAL + tristate "Serial Gadget (with CDC ACM and CDC OBEX support)" + depends on TTY + select USB_U_SERIAL + select USB_F_ACM + select USB_F_SERIAL + select USB_F_OBEX + select USB_LIBCOMPOSITE + help + The Serial Gadget talks to the Linux-USB generic serial driver. + This driver supports a CDC-ACM module option, which can be used + to interoperate with MS-Windows hosts or with the Linux-USB + "cdc-acm" driver. + + This driver also supports a CDC-OBEX option. You will need a + user space OBEX server talking to /dev/ttyGS*, since the kernel + itself doesn't implement the OBEX protocol. + + Say "y" to link the driver statically, or "m" to build a + dynamically linked module called "g_serial". + + For more information, see Documentation/usb/gadget_serial.txt + which includes instructions and a "driver info file" needed to + make MS-Windows work with CDC ACM. + +config USB_MIDI_GADGET + tristate "MIDI Gadget" + depends on SND + select USB_LIBCOMPOSITE + select SND_RAWMIDI + help + The MIDI Gadget acts as a USB Audio device, with one MIDI + input and one MIDI output. These MIDI jacks appear as + a sound "card" in the ALSA sound system. Other MIDI + connections can then be made on the gadget system, using + ALSA's aconnect utility etc. + + Say "y" to link the driver statically, or "m" to build a + dynamically linked module called "g_midi". + +config USB_G_PRINTER + tristate "Printer Gadget" + select USB_LIBCOMPOSITE + help + The Printer Gadget channels data between the USB host and a + userspace program driving the print engine. The user space + program reads and writes the device file /dev/g_printer to + receive or send printer data. It can use ioctl calls to + the device file to get or set printer status. + + Say "y" to link the driver statically, or "m" to build a + dynamically linked module called "g_printer". + + For more information, see Documentation/usb/gadget_printer.txt + which includes sample code for accessing the device file. + +if TTY + +config USB_CDC_COMPOSITE + tristate "CDC Composite Device (Ethernet and ACM)" + depends on NET + select USB_LIBCOMPOSITE + select USB_U_SERIAL + select USB_U_ETHER + select USB_F_ACM + select USB_F_ECM + help + This driver provides two functions in one configuration: + a CDC Ethernet (ECM) link, and a CDC ACM (serial port) link. + + This driver requires four bulk and two interrupt endpoints, + plus the ability to handle altsettings. Not all peripheral + controllers are that capable. + + Say "y" to link the driver statically, or "m" to build a + dynamically linked module. + +config USB_G_NOKIA + tristate "Nokia composite gadget" + depends on PHONET + select USB_LIBCOMPOSITE + select USB_U_SERIAL + select USB_U_ETHER + select USB_F_ACM + select USB_F_OBEX + select USB_F_PHONET + select USB_F_ECM + help + The Nokia composite gadget provides support for acm, obex + and phonet in only one composite gadget driver. + + It's only really useful for N900 hardware. If you're building + a kernel for N900, say Y or M here. If unsure, say N. + +config USB_G_ACM_MS + tristate "CDC Composite Device (ACM and mass storage)" + depends on BLOCK + select USB_LIBCOMPOSITE + select USB_U_SERIAL + select USB_F_ACM + select USB_F_MASS_STORAGE + help + This driver provides two functions in one configuration: + a mass storage, and a CDC ACM (serial port) link. + + Say "y" to link the driver statically, or "m" to build a + dynamically linked module called "g_acm_ms". + +config USB_G_MULTI + tristate "Multifunction Composite Gadget" + depends on BLOCK && NET + select USB_G_MULTI_CDC if !USB_G_MULTI_RNDIS + select USB_LIBCOMPOSITE + select USB_U_SERIAL + select USB_U_ETHER + select USB_F_ACM + select USB_F_MASS_STORAGE + help + The Multifunction Composite Gadget provides Ethernet (RNDIS + and/or CDC Ethernet), mass storage and ACM serial link + interfaces. + + You will be asked to choose which of the two configurations is + to be available in the gadget. At least one configuration must + be chosen to make the gadget usable. Selecting more than one + configuration will prevent Windows from automatically detecting + the gadget as a composite gadget, so an INF file will be needed to + use the gadget. + + Say "y" to link the driver statically, or "m" to build a + dynamically linked module called "g_multi". + +config USB_G_MULTI_RNDIS + bool "RNDIS + CDC Serial + Storage configuration" + depends on USB_G_MULTI + select USB_F_RNDIS + default y + help + This option enables a configuration with RNDIS, CDC Serial and + Mass Storage functions available in the Multifunction Composite + Gadget. This is the configuration dedicated for Windows since RNDIS + is Microsoft's protocol. + + If unsure, say "y". + +config USB_G_MULTI_CDC + bool "CDC Ethernet + CDC Serial + Storage configuration" + depends on USB_G_MULTI + default n + select USB_F_ECM + help + This option enables a configuration with CDC Ethernet (ECM), CDC + Serial and Mass Storage functions available in the Multifunction + Composite Gadget. + + If unsure, say "y". + +endif # TTY + +config USB_G_HID + tristate "HID Gadget" + select USB_LIBCOMPOSITE + help + The HID gadget driver provides generic emulation of USB + Human Interface Devices (HID). + + For more information, see Documentation/usb/gadget_hid.txt which + includes sample code for accessing the device files. + + Say "y" to link the driver statically, or "m" to build a + dynamically linked module called "g_hid". + +# Standalone / single function gadgets +config USB_G_DBGP + tristate "EHCI Debug Device Gadget" + depends on TTY + select USB_LIBCOMPOSITE + help + This gadget emulates an EHCI Debug device. This is useful when you want + to interact with an EHCI Debug Port. + + Say "y" to link the driver statically, or "m" to build a + dynamically linked module called "g_dbgp". + +if USB_G_DBGP +choice + prompt "EHCI Debug Device mode" + default USB_G_DBGP_SERIAL + +config USB_G_DBGP_PRINTK + depends on USB_G_DBGP + bool "printk" + help + Directly printk() received data. No interaction. + +config USB_G_DBGP_SERIAL + depends on USB_G_DBGP + select USB_U_SERIAL + bool "serial" + help + Userland can interact using /dev/ttyGSxxx. +endchoice +endif + +# put drivers that need isochronous transfer support (for audio +# or video class gadget drivers), or specific hardware, here. +config USB_G_WEBCAM + tristate "USB Webcam Gadget" + depends on VIDEO_DEV + select USB_LIBCOMPOSITE + select VIDEOBUF2_VMALLOC + help + The Webcam Gadget acts as a composite USB Audio and Video Class + device. It provides a userspace API to process UVC control requests + and stream video data to the host. + + Say "y" to link the driver statically, or "m" to build a + dynamically linked module called "g_webcam". diff --git a/drivers/usb/gadget/legacy/Makefile b/drivers/usb/gadget/legacy/Makefile new file mode 100644 index 000000000000..fbb32aa6f690 --- /dev/null +++ b/drivers/usb/gadget/legacy/Makefile @@ -0,0 +1,42 @@ +# +# USB gadget drivers +# + +ccflags-y := -I$(PWD)/drivers/usb/gadget/ + +g_zero-y := zero.o +g_audio-y := audio.o +g_ether-y := ether.o +g_serial-y := serial.o +g_midi-y := gmidi.o +gadgetfs-y := inode.o +g_mass_storage-y := mass_storage.o +g_printer-y := printer.o +g_cdc-y := cdc2.o +g_multi-y := multi.o +g_hid-y := hid.o +g_dbgp-y := dbgp.o +g_nokia-y := nokia.o +g_webcam-y := webcam.o +g_ncm-y := ncm.o +g_acm_ms-y := acm_ms.o +g_tcm_usb_gadget-y := tcm_usb_gadget.o + +obj-$(CONFIG_USB_ZERO) += g_zero.o +obj-$(CONFIG_USB_AUDIO) += g_audio.o +obj-$(CONFIG_USB_ETH) += g_ether.o +obj-$(CONFIG_USB_GADGETFS) += gadgetfs.o +obj-$(CONFIG_USB_FUNCTIONFS) += g_ffs.o +obj-$(CONFIG_USB_MASS_STORAGE) += g_mass_storage.o +obj-$(CONFIG_USB_G_SERIAL) += g_serial.o +obj-$(CONFIG_USB_G_PRINTER) += g_printer.o +obj-$(CONFIG_USB_MIDI_GADGET) += g_midi.o +obj-$(CONFIG_USB_CDC_COMPOSITE) += g_cdc.o +obj-$(CONFIG_USB_G_HID) += g_hid.o +obj-$(CONFIG_USB_G_DBGP) += g_dbgp.o +obj-$(CONFIG_USB_G_MULTI) += g_multi.o +obj-$(CONFIG_USB_G_NOKIA) += g_nokia.o +obj-$(CONFIG_USB_G_WEBCAM) += g_webcam.o +obj-$(CONFIG_USB_G_NCM) += g_ncm.o +obj-$(CONFIG_USB_G_ACM_MS) += g_acm_ms.o +obj-$(CONFIG_USB_GADGET_TARGET) += tcm_usb_gadget.o diff --git a/drivers/usb/gadget/acm_ms.c b/drivers/usb/gadget/legacy/acm_ms.c index c30b7b572465..c30b7b572465 100644 --- a/drivers/usb/gadget/acm_ms.c +++ b/drivers/usb/gadget/legacy/acm_ms.c diff --git a/drivers/usb/gadget/audio.c b/drivers/usb/gadget/legacy/audio.c index 6eb695e5e43a..6eb695e5e43a 100644 --- a/drivers/usb/gadget/audio.c +++ b/drivers/usb/gadget/legacy/audio.c diff --git a/drivers/usb/gadget/cdc2.c b/drivers/usb/gadget/legacy/cdc2.c index 2e85d9473478..2e85d9473478 100644 --- a/drivers/usb/gadget/cdc2.c +++ b/drivers/usb/gadget/legacy/cdc2.c diff --git a/drivers/usb/gadget/dbgp.c b/drivers/usb/gadget/legacy/dbgp.c index 986fc511a2ed..986fc511a2ed 100644 --- a/drivers/usb/gadget/dbgp.c +++ b/drivers/usb/gadget/legacy/dbgp.c diff --git a/drivers/usb/gadget/ether.c b/drivers/usb/gadget/legacy/ether.c index c5fdc61cdc4a..c5fdc61cdc4a 100644 --- a/drivers/usb/gadget/ether.c +++ b/drivers/usb/gadget/legacy/ether.c diff --git a/drivers/usb/gadget/g_ffs.c b/drivers/usb/gadget/legacy/g_ffs.c index 06acfa55864a..06acfa55864a 100644 --- a/drivers/usb/gadget/g_ffs.c +++ b/drivers/usb/gadget/legacy/g_ffs.c diff --git a/drivers/usb/gadget/gmidi.c b/drivers/usb/gadget/legacy/gmidi.c index 3d696b86ff76..3d696b86ff76 100644 --- a/drivers/usb/gadget/gmidi.c +++ b/drivers/usb/gadget/legacy/gmidi.c diff --git a/drivers/usb/gadget/hid.c b/drivers/usb/gadget/legacy/hid.c index 778613eb37af..778613eb37af 100644 --- a/drivers/usb/gadget/hid.c +++ b/drivers/usb/gadget/legacy/hid.c diff --git a/drivers/usb/gadget/inode.c b/drivers/usb/gadget/legacy/inode.c index ee6c16416c30..ee6c16416c30 100644 --- a/drivers/usb/gadget/inode.c +++ b/drivers/usb/gadget/legacy/inode.c diff --git a/drivers/usb/gadget/mass_storage.c b/drivers/usb/gadget/legacy/mass_storage.c index 8e27a8c96444..8e27a8c96444 100644 --- a/drivers/usb/gadget/mass_storage.c +++ b/drivers/usb/gadget/legacy/mass_storage.c diff --git a/drivers/usb/gadget/multi.c b/drivers/usb/gadget/legacy/multi.c index 39d27bb343b4..39d27bb343b4 100644 --- a/drivers/usb/gadget/multi.c +++ b/drivers/usb/gadget/legacy/multi.c diff --git a/drivers/usb/gadget/ncm.c b/drivers/usb/gadget/legacy/ncm.c index e90e23db2acb..e90e23db2acb 100644 --- a/drivers/usb/gadget/ncm.c +++ b/drivers/usb/gadget/legacy/ncm.c diff --git a/drivers/usb/gadget/nokia.c b/drivers/usb/gadget/legacy/nokia.c index 9b8fd701648c..9b8fd701648c 100644 --- a/drivers/usb/gadget/nokia.c +++ b/drivers/usb/gadget/legacy/nokia.c diff --git a/drivers/usb/gadget/printer.c b/drivers/usb/gadget/legacy/printer.c index 6474081dcbaf..6474081dcbaf 100644 --- a/drivers/usb/gadget/printer.c +++ b/drivers/usb/gadget/legacy/printer.c diff --git a/drivers/usb/gadget/serial.c b/drivers/usb/gadget/legacy/serial.c index 1f5f978d35d5..1f5f978d35d5 100644 --- a/drivers/usb/gadget/serial.c +++ b/drivers/usb/gadget/legacy/serial.c diff --git a/drivers/usb/gadget/tcm_usb_gadget.c b/drivers/usb/gadget/legacy/tcm_usb_gadget.c index 6cdb7a534f23..6cdb7a534f23 100644 --- a/drivers/usb/gadget/tcm_usb_gadget.c +++ b/drivers/usb/gadget/legacy/tcm_usb_gadget.c diff --git a/drivers/usb/gadget/tcm_usb_gadget.h b/drivers/usb/gadget/legacy/tcm_usb_gadget.h index 8289219925b8..8289219925b8 100644 --- a/drivers/usb/gadget/tcm_usb_gadget.h +++ b/drivers/usb/gadget/legacy/tcm_usb_gadget.h diff --git a/drivers/usb/gadget/webcam.c b/drivers/usb/gadget/legacy/webcam.c index a11d8e420bfe..a11d8e420bfe 100644 --- a/drivers/usb/gadget/webcam.c +++ b/drivers/usb/gadget/legacy/webcam.c diff --git a/drivers/usb/gadget/zero.c b/drivers/usb/gadget/legacy/zero.c index c3d496828b74..c3d496828b74 100644 --- a/drivers/usb/gadget/zero.c +++ b/drivers/usb/gadget/legacy/zero.c |