diff options
Diffstat (limited to 'drivers/usb/dwc3')
-rw-r--r-- | drivers/usb/dwc3/Kconfig | 1 | ||||
-rw-r--r-- | drivers/usb/dwc3/core.c | 29 | ||||
-rw-r--r-- | drivers/usb/dwc3/core.h | 18 | ||||
-rw-r--r-- | drivers/usb/dwc3/drd.c | 98 | ||||
-rw-r--r-- | drivers/usb/dwc3/dwc3-exynos.c | 9 | ||||
-rw-r--r-- | drivers/usb/dwc3/dwc3-meson-g12a.c | 182 | ||||
-rw-r--r-- | drivers/usb/dwc3/dwc3-pci.c | 1 | ||||
-rw-r--r-- | drivers/usb/dwc3/dwc3-qcom.c | 2 | ||||
-rw-r--r-- | drivers/usb/dwc3/gadget.c | 85 | ||||
-rw-r--r-- | drivers/usb/dwc3/host.c | 4 | ||||
-rw-r--r-- | drivers/usb/dwc3/trace.h | 9 |
11 files changed, 319 insertions, 119 deletions
diff --git a/drivers/usb/dwc3/Kconfig b/drivers/usb/dwc3/Kconfig index 206caa0ea1c6..7a2304565a73 100644 --- a/drivers/usb/dwc3/Kconfig +++ b/drivers/usb/dwc3/Kconfig @@ -4,6 +4,7 @@ config USB_DWC3 tristate "DesignWare USB3 DRD Core Support" depends on (USB || USB_GADGET) && HAS_DMA select USB_XHCI_PLATFORM if USB_XHCI_HCD + select USB_ROLE_SWITCH if USB_DWC3_DUAL_ROLE help Say Y or M here if your system has a Dual Role SuperSpeed USB controller based on the DesignWare USB3 IP Core. diff --git a/drivers/usb/dwc3/core.c b/drivers/usb/dwc3/core.c index 1d85c42b9c67..edc17155cb2b 100644 --- a/drivers/usb/dwc3/core.c +++ b/drivers/usb/dwc3/core.c @@ -289,12 +289,6 @@ done: return 0; } -static const struct clk_bulk_data dwc3_core_clks[] = { - { .id = "ref" }, - { .id = "bus_early" }, - { .id = "suspend" }, -}; - /* * dwc3_frame_length_adjustment - Adjusts frame length if required * @dwc3: Pointer to our controller context structure @@ -1029,6 +1023,9 @@ static int dwc3_core_init(struct dwc3 *dwc) if (dwc->dis_tx_ipgap_linecheck_quirk) reg |= DWC3_GUCTL1_TX_IPGAP_LINECHECK_DIS; + if (dwc->parkmode_disable_ss_quirk) + reg |= DWC3_GUCTL1_PARKMODE_DISABLE_SS; + dwc3_writel(dwc->regs, DWC3_GUCTL1, reg); } @@ -1342,6 +1339,8 @@ static void dwc3_get_properties(struct dwc3 *dwc) "snps,dis-del-phy-power-chg-quirk"); dwc->dis_tx_ipgap_linecheck_quirk = device_property_read_bool(dev, "snps,dis-tx-ipgap-linecheck-quirk"); + dwc->parkmode_disable_ss_quirk = device_property_read_bool(dev, + "snps,parkmode-disable-ss-quirk"); dwc->tx_de_emphasis_quirk = device_property_read_bool(dev, "snps,tx_de_emphasis_quirk"); @@ -1441,11 +1440,6 @@ static int dwc3_probe(struct platform_device *pdev) if (!dwc) return -ENOMEM; - dwc->clks = devm_kmemdup(dev, dwc3_core_clks, sizeof(dwc3_core_clks), - GFP_KERNEL); - if (!dwc->clks) - return -ENOMEM; - dwc->dev = dev; res = platform_get_resource(pdev, IORESOURCE_MEM, 0); @@ -1476,22 +1470,23 @@ static int dwc3_probe(struct platform_device *pdev) dwc3_get_properties(dwc); - dwc->reset = devm_reset_control_get_optional_shared(dev, NULL); + dwc->reset = devm_reset_control_array_get(dev, true, true); if (IS_ERR(dwc->reset)) return PTR_ERR(dwc->reset); if (dev->of_node) { - dwc->num_clks = ARRAY_SIZE(dwc3_core_clks); - - ret = devm_clk_bulk_get(dev, dwc->num_clks, dwc->clks); + ret = devm_clk_bulk_get_all(dev, &dwc->clks); if (ret == -EPROBE_DEFER) return ret; /* * Clocks are optional, but new DT platforms should support all * clocks as required by the DT-binding. */ - if (ret) + if (ret < 0) dwc->num_clks = 0; + else + dwc->num_clks = ret; + } ret = reset_control_deassert(dwc->reset); @@ -1637,6 +1632,8 @@ static int dwc3_suspend_common(struct dwc3 *dwc, pm_message_t msg) switch (dwc->current_dr_role) { case DWC3_GCTL_PRTCAP_DEVICE: + if (pm_runtime_suspended(dwc->dev)) + break; spin_lock_irqsave(&dwc->lock, flags); dwc3_gadget_suspend(dwc); spin_unlock_irqrestore(&dwc->lock, flags); diff --git a/drivers/usb/dwc3/core.h b/drivers/usb/dwc3/core.h index 77c4a9abe365..4c171a8e215f 100644 --- a/drivers/usb/dwc3/core.h +++ b/drivers/usb/dwc3/core.h @@ -25,6 +25,7 @@ #include <linux/usb/ch9.h> #include <linux/usb/gadget.h> #include <linux/usb/otg.h> +#include <linux/usb/role.h> #include <linux/ulpi/interface.h> #include <linux/phy/phy.h> @@ -249,6 +250,7 @@ #define DWC3_GUCTL_HSTINAUTORETRY BIT(14) /* Global User Control 1 Register */ +#define DWC3_GUCTL1_PARKMODE_DISABLE_SS BIT(17) #define DWC3_GUCTL1_TX_IPGAP_LINECHECK_DIS BIT(28) #define DWC3_GUCTL1_DEV_L1_EXIT_BY_HW BIT(24) @@ -305,10 +307,14 @@ /* Global TX Fifo Size Register */ #define DWC31_GTXFIFOSIZ_TXFRAMNUM BIT(15) /* DWC_usb31 only */ -#define DWC31_GTXFIFOSIZ_TXFDEF(n) ((n) & 0x7fff) /* DWC_usb31 only */ -#define DWC3_GTXFIFOSIZ_TXFDEF(n) ((n) & 0xffff) +#define DWC31_GTXFIFOSIZ_TXFDEP(n) ((n) & 0x7fff) /* DWC_usb31 only */ +#define DWC3_GTXFIFOSIZ_TXFDEP(n) ((n) & 0xffff) #define DWC3_GTXFIFOSIZ_TXFSTADDR(n) ((n) & 0xffff0000) +/* Global RX Fifo Size Register */ +#define DWC31_GRXFIFOSIZ_RXFDEP(n) ((n) & 0x7fff) /* DWC_usb31 only */ +#define DWC3_GRXFIFOSIZ_RXFDEP(n) ((n) & 0xffff) + /* Global Event Size Registers */ #define DWC3_GEVNTSIZ_INTMASK BIT(31) #define DWC3_GEVNTSIZ_SIZE(n) ((n) & 0xffff) @@ -953,6 +959,9 @@ struct dwc3_scratchpad_array { * @hsphy_mode: UTMI phy mode, one of following: * - USBPHY_INTERFACE_MODE_UTMI * - USBPHY_INTERFACE_MODE_UTMIW + * @role_sw: usb_role_switch handle + * @role_switch_default_mode: default operation mode of controller while + * usb role is USB_ROLE_NONE. * @usb2_phy: pointer to USB2 PHY * @usb3_phy: pointer to USB3 PHY * @usb2_generic_phy: pointer to USB2 PHY @@ -1024,6 +1033,8 @@ struct dwc3_scratchpad_array { * change quirk. * @dis_tx_ipgap_linecheck_quirk: set if we disable u2mac linestate * check during HS transmit. + * @parkmode_disable_ss_quirk: set if we need to disable all SuperSpeed + * instances in park mode. * @tx_de_emphasis_quirk: set if we enable Tx de-emphasis quirk * @tx_de_emphasis: Tx de-emphasis value * 0 - -6dB de-emphasis @@ -1086,6 +1097,8 @@ struct dwc3 { struct extcon_dev *edev; struct notifier_block edev_nb; enum usb_phy_interface hsphy_mode; + struct usb_role_switch *role_sw; + enum usb_dr_mode role_switch_default_mode; u32 fladj; u32 irq_gadget; @@ -1215,6 +1228,7 @@ struct dwc3 { unsigned dis_u2_freeclk_exists_quirk:1; unsigned dis_del_phy_power_chg_quirk:1; unsigned dis_tx_ipgap_linecheck_quirk:1; + unsigned parkmode_disable_ss_quirk:1; unsigned tx_de_emphasis_quirk:1; unsigned tx_de_emphasis:2; diff --git a/drivers/usb/dwc3/drd.c b/drivers/usb/dwc3/drd.c index c946d64142ad..7db1ffc92bbd 100644 --- a/drivers/usb/dwc3/drd.c +++ b/drivers/usb/dwc3/drd.c @@ -476,6 +476,94 @@ static struct extcon_dev *dwc3_get_extcon(struct dwc3 *dwc) return edev; } +#if IS_ENABLED(CONFIG_USB_ROLE_SWITCH) +#define ROLE_SWITCH 1 +static int dwc3_usb_role_switch_set(struct usb_role_switch *sw, + enum usb_role role) +{ + struct dwc3 *dwc = usb_role_switch_get_drvdata(sw); + u32 mode; + + switch (role) { + case USB_ROLE_HOST: + mode = DWC3_GCTL_PRTCAP_HOST; + break; + case USB_ROLE_DEVICE: + mode = DWC3_GCTL_PRTCAP_DEVICE; + break; + default: + if (dwc->role_switch_default_mode == USB_DR_MODE_HOST) + mode = DWC3_GCTL_PRTCAP_HOST; + else + mode = DWC3_GCTL_PRTCAP_DEVICE; + break; + } + + dwc3_set_mode(dwc, mode); + return 0; +} + +static enum usb_role dwc3_usb_role_switch_get(struct usb_role_switch *sw) +{ + struct dwc3 *dwc = usb_role_switch_get_drvdata(sw); + unsigned long flags; + enum usb_role role; + + spin_lock_irqsave(&dwc->lock, flags); + switch (dwc->current_dr_role) { + case DWC3_GCTL_PRTCAP_HOST: + role = USB_ROLE_HOST; + break; + case DWC3_GCTL_PRTCAP_DEVICE: + role = USB_ROLE_DEVICE; + break; + case DWC3_GCTL_PRTCAP_OTG: + role = dwc->current_otg_role; + break; + default: + if (dwc->role_switch_default_mode == USB_DR_MODE_HOST) + role = USB_ROLE_HOST; + else + role = USB_ROLE_DEVICE; + break; + } + spin_unlock_irqrestore(&dwc->lock, flags); + return role; +} + +static int dwc3_setup_role_switch(struct dwc3 *dwc) +{ + struct usb_role_switch_desc dwc3_role_switch = {NULL}; + const char *str; + u32 mode; + int ret; + + ret = device_property_read_string(dwc->dev, "role-switch-default-mode", + &str); + if (ret >= 0 && !strncmp(str, "host", strlen("host"))) { + dwc->role_switch_default_mode = USB_DR_MODE_HOST; + mode = DWC3_GCTL_PRTCAP_HOST; + } else { + dwc->role_switch_default_mode = USB_DR_MODE_PERIPHERAL; + mode = DWC3_GCTL_PRTCAP_DEVICE; + } + + dwc3_role_switch.fwnode = dev_fwnode(dwc->dev); + dwc3_role_switch.set = dwc3_usb_role_switch_set; + dwc3_role_switch.get = dwc3_usb_role_switch_get; + dwc3_role_switch.driver_data = dwc; + dwc->role_sw = usb_role_switch_register(dwc->dev, &dwc3_role_switch); + if (IS_ERR(dwc->role_sw)) + return PTR_ERR(dwc->role_sw); + + dwc3_set_mode(dwc, mode); + return 0; +} +#else +#define ROLE_SWITCH 0 +#define dwc3_setup_role_switch(x) 0 +#endif + int dwc3_drd_init(struct dwc3 *dwc) { int ret, irq; @@ -484,7 +572,12 @@ int dwc3_drd_init(struct dwc3 *dwc) if (IS_ERR(dwc->edev)) return PTR_ERR(dwc->edev); - if (dwc->edev) { + if (ROLE_SWITCH && + device_property_read_bool(dwc->dev, "usb-role-switch")) { + ret = dwc3_setup_role_switch(dwc); + if (ret < 0) + return ret; + } else if (dwc->edev) { dwc->edev_nb.notifier_call = dwc3_drd_notifier; ret = extcon_register_notifier(dwc->edev, EXTCON_USB_HOST, &dwc->edev_nb); @@ -531,6 +624,9 @@ void dwc3_drd_exit(struct dwc3 *dwc) { unsigned long flags; + if (dwc->role_sw) + usb_role_switch_unregister(dwc->role_sw); + if (dwc->edev) extcon_unregister_notifier(dwc->edev, EXTCON_USB_HOST, &dwc->edev_nb); diff --git a/drivers/usb/dwc3/dwc3-exynos.c b/drivers/usb/dwc3/dwc3-exynos.c index 90bb022737da..48b68b6f0dc8 100644 --- a/drivers/usb/dwc3/dwc3-exynos.c +++ b/drivers/usb/dwc3/dwc3-exynos.c @@ -162,6 +162,12 @@ static const struct dwc3_exynos_driverdata exynos5250_drvdata = { .suspend_clk_idx = -1, }; +static const struct dwc3_exynos_driverdata exynos5420_drvdata = { + .clk_names = { "usbdrd30", "usbdrd30_susp_clk"}, + .num_clks = 2, + .suspend_clk_idx = 1, +}; + static const struct dwc3_exynos_driverdata exynos5433_drvdata = { .clk_names = { "aclk", "susp_clk", "pipe_pclk", "phyclk" }, .num_clks = 4, @@ -179,6 +185,9 @@ static const struct of_device_id exynos_dwc3_match[] = { .compatible = "samsung,exynos5250-dwusb3", .data = &exynos5250_drvdata, }, { + .compatible = "samsung,exynos5420-dwusb3", + .data = &exynos5420_drvdata, + }, { .compatible = "samsung,exynos5433-dwusb3", .data = &exynos5433_drvdata, }, { diff --git a/drivers/usb/dwc3/dwc3-meson-g12a.c b/drivers/usb/dwc3/dwc3-meson-g12a.c index 8a3ec1a951fe..b81d085bc534 100644 --- a/drivers/usb/dwc3/dwc3-meson-g12a.c +++ b/drivers/usb/dwc3/dwc3-meson-g12a.c @@ -107,10 +107,37 @@ static const char *phy_names[PHY_COUNT] = { "usb2-phy0", "usb2-phy1", "usb3-phy0", }; +static struct clk_bulk_data meson_g12a_clocks[] = { + { .id = NULL }, +}; + +static struct clk_bulk_data meson_a1_clocks[] = { + { .id = "usb_ctrl" }, + { .id = "usb_bus" }, + { .id = "xtal_usb_ctrl" }, +}; + +struct dwc3_meson_g12a_drvdata { + bool otg_switch_supported; + struct clk_bulk_data *clks; + int num_clks; +}; + +static struct dwc3_meson_g12a_drvdata g12a_drvdata = { + .otg_switch_supported = true, + .clks = meson_g12a_clocks, + .num_clks = ARRAY_SIZE(meson_g12a_clocks), +}; + +static struct dwc3_meson_g12a_drvdata a1_drvdata = { + .otg_switch_supported = false, + .clks = meson_a1_clocks, + .num_clks = ARRAY_SIZE(meson_a1_clocks), +}; + struct dwc3_meson_g12a { struct device *dev; struct regmap *regmap; - struct clk *clk; struct reset_control *reset; struct phy *phys[PHY_COUNT]; enum usb_dr_mode otg_mode; @@ -120,6 +147,7 @@ struct dwc3_meson_g12a { struct regulator *vbus; struct usb_role_switch_desc switch_desc; struct usb_role_switch *role_switch; + const struct dwc3_meson_g12a_drvdata *drvdata; }; static void dwc3_meson_g12a_usb2_set_mode(struct dwc3_meson_g12a *priv, @@ -151,7 +179,7 @@ static int dwc3_meson_g12a_usb2_init(struct dwc3_meson_g12a *priv) U2P_R0_POWER_ON_RESET, U2P_R0_POWER_ON_RESET); - if (i == USB2_OTG_PHY) { + if (priv->drvdata->otg_switch_supported && i == USB2_OTG_PHY) { regmap_update_bits(priv->regmap, U2P_R0 + (U2P_REG_SIZE * i), U2P_R0_ID_PULLUP | U2P_R0_DRV_VBUS, @@ -295,7 +323,7 @@ static int dwc3_meson_g12a_otg_mode_set(struct dwc3_meson_g12a *priv, { int ret; - if (!priv->phys[USB2_OTG_PHY]) + if (!priv->drvdata->otg_switch_supported || !priv->phys[USB2_OTG_PHY]) return -EINVAL; if (mode == PHY_MODE_USB_HOST) @@ -321,9 +349,10 @@ static int dwc3_meson_g12a_otg_mode_set(struct dwc3_meson_g12a *priv, return 0; } -static int dwc3_meson_g12a_role_set(struct device *dev, enum usb_role role) +static int dwc3_meson_g12a_role_set(struct usb_role_switch *sw, + enum usb_role role) { - struct dwc3_meson_g12a *priv = dev_get_drvdata(dev); + struct dwc3_meson_g12a *priv = usb_role_switch_get_drvdata(sw); enum phy_mode mode; if (role == USB_ROLE_NONE) @@ -338,9 +367,9 @@ static int dwc3_meson_g12a_role_set(struct device *dev, enum usb_role role) return dwc3_meson_g12a_otg_mode_set(priv, mode); } -static enum usb_role dwc3_meson_g12a_role_get(struct device *dev) +static enum usb_role dwc3_meson_g12a_role_get(struct usb_role_switch *sw) { - struct dwc3_meson_g12a *priv = dev_get_drvdata(dev); + struct dwc3_meson_g12a *priv = usb_role_switch_get_drvdata(sw); return priv->otg_phy_mode == PHY_MODE_USB_HOST ? USB_ROLE_HOST : USB_ROLE_DEVICE; @@ -380,14 +409,61 @@ static struct device *dwc3_meson_g12_find_child(struct device *dev, return &pdev->dev; } +static int dwc3_meson_g12a_otg_init(struct platform_device *pdev, + struct dwc3_meson_g12a *priv) +{ + enum phy_mode otg_id; + int ret, irq; + struct device *dev = &pdev->dev; + + if (!priv->drvdata->otg_switch_supported) + return 0; + + if (priv->otg_mode == USB_DR_MODE_OTG) { + /* Ack irq before registering */ + regmap_update_bits(priv->regmap, USB_R5, + USB_R5_ID_DIG_IRQ, 0); + + irq = platform_get_irq(pdev, 0); + ret = devm_request_threaded_irq(&pdev->dev, irq, NULL, + dwc3_meson_g12a_irq_thread, + IRQF_ONESHOT, pdev->name, priv); + if (ret) + return ret; + } + + /* Setup OTG mode corresponding to the ID pin */ + if (priv->otg_mode == USB_DR_MODE_OTG) { + otg_id = dwc3_meson_g12a_get_id(priv); + if (otg_id != priv->otg_phy_mode) { + if (dwc3_meson_g12a_otg_mode_set(priv, otg_id)) + dev_warn(dev, "Failed to switch OTG mode\n"); + } + } + + /* Setup role switcher */ + priv->switch_desc.usb2_port = dwc3_meson_g12_find_child(dev, + "snps,dwc3"); + priv->switch_desc.udc = dwc3_meson_g12_find_child(dev, "snps,dwc2"); + priv->switch_desc.allow_userspace_control = true; + priv->switch_desc.set = dwc3_meson_g12a_role_set; + priv->switch_desc.get = dwc3_meson_g12a_role_get; + priv->switch_desc.driver_data = priv; + + priv->role_switch = usb_role_switch_register(dev, &priv->switch_desc); + if (IS_ERR(priv->role_switch)) + dev_warn(dev, "Unable to register Role Switch\n"); + + return 0; +} + static int dwc3_meson_g12a_probe(struct platform_device *pdev) { struct dwc3_meson_g12a *priv; struct device *dev = &pdev->dev; struct device_node *np = dev->of_node; void __iomem *base; - enum phy_mode otg_id; - int ret, i, irq; + int ret, i; priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL); if (!priv) @@ -409,17 +485,18 @@ static int dwc3_meson_g12a_probe(struct platform_device *pdev) priv->vbus = NULL; } - priv->clk = devm_clk_get(dev, NULL); - if (IS_ERR(priv->clk)) - return PTR_ERR(priv->clk); + priv->drvdata = of_device_get_match_data(&pdev->dev); - ret = clk_prepare_enable(priv->clk); + ret = devm_clk_bulk_get(dev, + priv->drvdata->num_clks, + priv->drvdata->clks); if (ret) return ret; - devm_add_action_or_reset(dev, - (void(*)(void *))clk_disable_unprepare, - priv->clk); + ret = clk_bulk_prepare_enable(priv->drvdata->num_clks, + priv->drvdata->clks); + if (ret) + return ret; platform_set_drvdata(pdev, priv); priv->dev = dev; @@ -433,41 +510,28 @@ static int dwc3_meson_g12a_probe(struct platform_device *pdev) ret = reset_control_reset(priv->reset); if (ret) - return ret; + goto err_disable_clks; ret = dwc3_meson_g12a_get_phys(priv); if (ret) - return ret; + goto err_disable_clks; if (priv->vbus) { ret = regulator_enable(priv->vbus); if (ret) - return ret; + goto err_disable_clks; } /* Get dr_mode */ priv->otg_mode = usb_get_dr_mode(dev); - if (priv->otg_mode == USB_DR_MODE_OTG) { - /* Ack irq before registering */ - regmap_update_bits(priv->regmap, USB_R5, - USB_R5_ID_DIG_IRQ, 0); - - irq = platform_get_irq(pdev, 0); - ret = devm_request_threaded_irq(&pdev->dev, irq, NULL, - dwc3_meson_g12a_irq_thread, - IRQF_ONESHOT, pdev->name, priv); - if (ret) - return ret; - } - dwc3_meson_g12a_usb_init(priv); /* Init PHYs */ for (i = 0 ; i < PHY_COUNT ; ++i) { ret = phy_init(priv->phys[i]); if (ret) - return ret; + goto err_disable_clks; } /* Set PHY Power */ @@ -478,31 +542,12 @@ static int dwc3_meson_g12a_probe(struct platform_device *pdev) } ret = of_platform_populate(np, NULL, NULL, dev); - if (ret) { - clk_disable_unprepare(priv->clk); + if (ret) goto err_phys_power; - } - /* Setup OTG mode corresponding to the ID pin */ - if (priv->otg_mode == USB_DR_MODE_OTG) { - otg_id = dwc3_meson_g12a_get_id(priv); - if (otg_id != priv->otg_phy_mode) { - if (dwc3_meson_g12a_otg_mode_set(priv, otg_id)) - dev_warn(dev, "Failed to switch OTG mode\n"); - } - } - - /* Setup role switcher */ - priv->switch_desc.usb2_port = dwc3_meson_g12_find_child(dev, - "snps,dwc3"); - priv->switch_desc.udc = dwc3_meson_g12_find_child(dev, "snps,dwc2"); - priv->switch_desc.allow_userspace_control = true; - priv->switch_desc.set = dwc3_meson_g12a_role_set; - priv->switch_desc.get = dwc3_meson_g12a_role_get; - - priv->role_switch = usb_role_switch_register(dev, &priv->switch_desc); - if (IS_ERR(priv->role_switch)) - dev_warn(dev, "Unable to register Role Switch\n"); + ret = dwc3_meson_g12a_otg_init(pdev, priv); + if (ret) + goto err_phys_power; pm_runtime_set_active(dev); pm_runtime_enable(dev); @@ -518,6 +563,10 @@ err_phys_exit: for (i = 0 ; i < PHY_COUNT ; ++i) phy_exit(priv->phys[i]); +err_disable_clks: + clk_bulk_disable_unprepare(priv->drvdata->num_clks, + priv->drvdata->clks); + return ret; } @@ -527,7 +576,8 @@ static int dwc3_meson_g12a_remove(struct platform_device *pdev) struct device *dev = &pdev->dev; int i; - usb_role_switch_unregister(priv->role_switch); + if (priv->drvdata->otg_switch_supported) + usb_role_switch_unregister(priv->role_switch); of_platform_depopulate(dev); @@ -540,6 +590,9 @@ static int dwc3_meson_g12a_remove(struct platform_device *pdev) pm_runtime_put_noidle(dev); pm_runtime_set_suspended(dev); + clk_bulk_disable_unprepare(priv->drvdata->num_clks, + priv->drvdata->clks); + return 0; } @@ -547,7 +600,8 @@ static int __maybe_unused dwc3_meson_g12a_runtime_suspend(struct device *dev) { struct dwc3_meson_g12a *priv = dev_get_drvdata(dev); - clk_disable(priv->clk); + clk_bulk_disable_unprepare(priv->drvdata->num_clks, + priv->drvdata->clks); return 0; } @@ -556,7 +610,8 @@ static int __maybe_unused dwc3_meson_g12a_runtime_resume(struct device *dev) { struct dwc3_meson_g12a *priv = dev_get_drvdata(dev); - return clk_enable(priv->clk); + return clk_bulk_prepare_enable(priv->drvdata->num_clks, + priv->drvdata->clks); } static int __maybe_unused dwc3_meson_g12a_suspend(struct device *dev) @@ -619,7 +674,14 @@ static const struct dev_pm_ops dwc3_meson_g12a_dev_pm_ops = { }; static const struct of_device_id dwc3_meson_g12a_match[] = { - { .compatible = "amlogic,meson-g12a-usb-ctrl" }, + { + .compatible = "amlogic,meson-g12a-usb-ctrl", + .data = &g12a_drvdata, + }, + { + .compatible = "amlogic,meson-a1-usb-ctrl", + .data = &a1_drvdata, + }, { /* Sentinel */ } }; MODULE_DEVICE_TABLE(of, dwc3_meson_g12a_match); diff --git a/drivers/usb/dwc3/dwc3-pci.c b/drivers/usb/dwc3/dwc3-pci.c index 7051611229c9..b67372737dc9 100644 --- a/drivers/usb/dwc3/dwc3-pci.c +++ b/drivers/usb/dwc3/dwc3-pci.c @@ -114,6 +114,7 @@ static const struct property_entry dwc3_pci_intel_properties[] = { static const struct property_entry dwc3_pci_mrfld_properties[] = { PROPERTY_ENTRY_STRING("dr_mode", "otg"), + PROPERTY_ENTRY_STRING("linux,extcon-name", "mrfld_bcove_pwrsrc"), PROPERTY_ENTRY_BOOL("linux,sysdev_is_parent"), {} }; diff --git a/drivers/usb/dwc3/dwc3-qcom.c b/drivers/usb/dwc3/dwc3-qcom.c index 261af9e38ddd..1dfd024cd06b 100644 --- a/drivers/usb/dwc3/dwc3-qcom.c +++ b/drivers/usb/dwc3/dwc3-qcom.c @@ -9,7 +9,7 @@ #include <linux/of.h> #include <linux/clk.h> #include <linux/irq.h> -#include <linux/clk-provider.h> +#include <linux/of_clk.h> #include <linux/module.h> #include <linux/kernel.h> #include <linux/extcon.h> diff --git a/drivers/usb/dwc3/gadget.c b/drivers/usb/dwc3/gadget.c index 1e00bf2d65a2..585cb3deea7a 100644 --- a/drivers/usb/dwc3/gadget.c +++ b/drivers/usb/dwc3/gadget.c @@ -1521,7 +1521,7 @@ static void dwc3_gadget_ep_skip_trbs(struct dwc3_ep *dep, struct dwc3_request *r for (i = 0; i < req->num_trbs; i++) { struct dwc3_trb *trb; - trb = req->trb + i; + trb = &dep->trb_pool[dep->trb_dequeue]; trb->ctrl &= ~DWC3_TRB_CTRL_HWO; dwc3_ep_inc_deq(dep); } @@ -1728,7 +1728,6 @@ static int __dwc3_gadget_wakeup(struct dwc3 *dwc) u32 reg; u8 link_state; - u8 speed; /* * According to the Databook Remote wakeup request should @@ -1738,16 +1737,13 @@ static int __dwc3_gadget_wakeup(struct dwc3 *dwc) */ reg = dwc3_readl(dwc->regs, DWC3_DSTS); - speed = reg & DWC3_DSTS_CONNECTSPD; - if ((speed == DWC3_DSTS_SUPERSPEED) || - (speed == DWC3_DSTS_SUPERSPEED_PLUS)) - return 0; - link_state = DWC3_DSTS_USBLNKST(reg); switch (link_state) { + case DWC3_LINK_STATE_RESET: case DWC3_LINK_STATE_RX_DET: /* in HS, means Early Suspend */ case DWC3_LINK_STATE_U3: /* in HS, means SUSPEND */ + case DWC3_LINK_STATE_RESUME: break; default: return -EINVAL; @@ -2227,7 +2223,6 @@ static int dwc3_gadget_init_in_endpoint(struct dwc3_ep *dep) { struct dwc3 *dwc = dep->dwc; int mdwidth; - int kbytes; int size; mdwidth = DWC3_MDWIDTH(dwc->hwparams.hwparams0); @@ -2236,24 +2231,24 @@ static int dwc3_gadget_init_in_endpoint(struct dwc3_ep *dep) size = dwc3_readl(dwc->regs, DWC3_GTXFIFOSIZ(dep->number >> 1)); if (dwc3_is_usb31(dwc)) - size = DWC31_GTXFIFOSIZ_TXFDEF(size); + size = DWC31_GTXFIFOSIZ_TXFDEP(size); else - size = DWC3_GTXFIFOSIZ_TXFDEF(size); + size = DWC3_GTXFIFOSIZ_TXFDEP(size); /* FIFO Depth is in MDWDITH bytes. Multiply */ size *= mdwidth; - kbytes = size / 1024; - if (kbytes == 0) - kbytes = 1; - /* - * FIFO sizes account an extra MDWIDTH * (kbytes + 1) bytes for - * internal overhead. We don't really know how these are used, - * but documentation say it exists. + * To meet performance requirement, a minimum TxFIFO size of 3x + * MaxPacketSize is recommended for endpoints that support burst and a + * minimum TxFIFO size of 2x MaxPacketSize for endpoints that don't + * support burst. Use those numbers and we can calculate the max packet + * limit as below. */ - size -= mdwidth * (kbytes + 1); - size /= kbytes; + if (dwc->maximum_speed >= USB_SPEED_SUPER) + size /= 3; + else + size /= 2; usb_ep_set_maxpacket_limit(&dep->endpoint, size); @@ -2271,8 +2266,39 @@ static int dwc3_gadget_init_in_endpoint(struct dwc3_ep *dep) static int dwc3_gadget_init_out_endpoint(struct dwc3_ep *dep) { struct dwc3 *dwc = dep->dwc; + int mdwidth; + int size; + + mdwidth = DWC3_MDWIDTH(dwc->hwparams.hwparams0); - usb_ep_set_maxpacket_limit(&dep->endpoint, 1024); + /* MDWIDTH is represented in bits, convert to bytes */ + mdwidth /= 8; + + /* All OUT endpoints share a single RxFIFO space */ + size = dwc3_readl(dwc->regs, DWC3_GRXFIFOSIZ(0)); + if (dwc3_is_usb31(dwc)) + size = DWC31_GRXFIFOSIZ_RXFDEP(size); + else + size = DWC3_GRXFIFOSIZ_RXFDEP(size); + + /* FIFO depth is in MDWDITH bytes */ + size *= mdwidth; + + /* + * To meet performance requirement, a minimum recommended RxFIFO size + * is defined as follow: + * RxFIFO size >= (3 x MaxPacketSize) + + * (3 x 8 bytes setup packets size) + (16 bytes clock crossing margin) + * + * Then calculate the max packet limit as below. + */ + size -= (3 * 8) + 16; + if (size < 0) + size = 0; + else + size /= 3; + + usb_ep_set_maxpacket_limit(&dep->endpoint, size); dep->endpoint.max_streams = 15; dep->endpoint.ops = &dwc3_gadget_ep_ops; list_add_tail(&dep->endpoint.ep_list, @@ -2457,9 +2483,6 @@ static int dwc3_gadget_ep_reclaim_trb_sg(struct dwc3_ep *dep, for_each_sg(sg, s, pending, i) { trb = &dep->trb_pool[dep->trb_dequeue]; - if (trb->ctrl & DWC3_TRB_CTRL_HWO) - break; - req->sg = sg_next(s); req->num_pending_sgs--; @@ -2484,14 +2507,7 @@ static int dwc3_gadget_ep_reclaim_trb_linear(struct dwc3_ep *dep, static bool dwc3_gadget_ep_request_completed(struct dwc3_request *req) { - /* - * For OUT direction, host may send less than the setup - * length. Return true for all OUT requests. - */ - if (!req->direction) - return true; - - return req->request.actual == req->request.length; + return req->num_pending_sgs == 0; } static int dwc3_gadget_ep_cleanup_completed_request(struct dwc3_ep *dep, @@ -2515,8 +2531,7 @@ static int dwc3_gadget_ep_cleanup_completed_request(struct dwc3_ep *dep, req->request.actual = req->request.length - req->remaining; - if (!dwc3_gadget_ep_request_completed(req) || - req->num_pending_sgs) { + if (!dwc3_gadget_ep_request_completed(req)) { __dwc3_gadget_kick_transfer(dep); goto out; } @@ -2570,10 +2585,8 @@ static void dwc3_gadget_endpoint_transfer_in_progress(struct dwc3_ep *dep, dwc3_gadget_ep_cleanup_completed_requests(dep, event, status); - if (stop) { + if (stop) dwc3_stop_active_transfer(dep, true, true); - dep->flags = DWC3_EP_ENABLED; - } /* * WORKAROUND: This is the 2nd half of U1/U2 -> U0 workaround. diff --git a/drivers/usb/dwc3/host.c b/drivers/usb/dwc3/host.c index fa252870c926..86dbd012b984 100644 --- a/drivers/usb/dwc3/host.c +++ b/drivers/usb/dwc3/host.c @@ -1,5 +1,5 @@ // SPDX-License-Identifier: GPL-2.0 -/** +/* * host.c - DesignWare USB3 DRD Controller Host Glue * * Copyright (C) 2011 Texas Instruments Incorporated - http://www.ti.com @@ -7,6 +7,7 @@ * Authors: Felipe Balbi <balbi@ti.com>, */ +#include <linux/acpi.h> #include <linux/platform_device.h> #include "core.h" @@ -75,6 +76,7 @@ int dwc3_host_init(struct dwc3 *dwc) } xhci->dev.parent = dwc->dev; + ACPI_COMPANION_SET(&xhci->dev, ACPI_COMPANION(dwc->dev)); dwc->xhci = xhci; diff --git a/drivers/usb/dwc3/trace.h b/drivers/usb/dwc3/trace.h index 9edff17111f7..3054b89512ff 100644 --- a/drivers/usb/dwc3/trace.h +++ b/drivers/usb/dwc3/trace.h @@ -227,6 +227,8 @@ DECLARE_EVENT_CLASS(dwc3_log_trb, __field(u32, size) __field(u32, ctrl) __field(u32, type) + __field(u32, enqueue) + __field(u32, dequeue) ), TP_fast_assign( __assign_str(name, dep->name); @@ -236,9 +238,12 @@ DECLARE_EVENT_CLASS(dwc3_log_trb, __entry->size = trb->size; __entry->ctrl = trb->ctrl; __entry->type = usb_endpoint_type(dep->endpoint.desc); + __entry->enqueue = dep->trb_enqueue; + __entry->dequeue = dep->trb_dequeue; ), - TP_printk("%s: trb %p buf %08x%08x size %s%d ctrl %08x (%c%c%c%c:%c%c:%s)", - __get_str(name), __entry->trb, __entry->bph, __entry->bpl, + TP_printk("%s: trb %p (E%d:D%d) buf %08x%08x size %s%d ctrl %08x (%c%c%c%c:%c%c:%s)", + __get_str(name), __entry->trb, __entry->enqueue, + __entry->dequeue, __entry->bph, __entry->bpl, ({char *s; int pcm = ((__entry->size >> 24) & 3) + 1; switch (__entry->type) { |