diff options
Diffstat (limited to 'drivers/scsi/megaraid/megaraid_mbox.c')
| -rw-r--r-- | drivers/scsi/megaraid/megaraid_mbox.c | 421 |
1 files changed, 250 insertions, 171 deletions
diff --git a/drivers/scsi/megaraid/megaraid_mbox.c b/drivers/scsi/megaraid/megaraid_mbox.c index 7bac86dda88f..04d0b6918c61 100644 --- a/drivers/scsi/megaraid/megaraid_mbox.c +++ b/drivers/scsi/megaraid/megaraid_mbox.c @@ -10,13 +10,13 @@ * 2 of the License, or (at your option) any later version. * * FILE : megaraid_mbox.c - * Version : v2.20.4.9 (Jul 16 2006) + * Version : v2.20.5.1 (Nov 16 2006) * * Authors: - * Atul Mukker <Atul.Mukker@lsil.com> - * Sreenivas Bagalkote <Sreenivas.Bagalkote@lsil.com> - * Manoj Jose <Manoj.Jose@lsil.com> - * Seokmann Ju <Seokmann.Ju@lsil.com> + * Atul Mukker <Atul.Mukker@lsi.com> + * Sreenivas Bagalkote <Sreenivas.Bagalkote@lsi.com> + * Manoj Jose <Manoj.Jose@lsi.com> + * Seokmann Ju * * List of supported controllers * @@ -107,6 +107,7 @@ static int megaraid_mbox_support_random_del(adapter_t *); static int megaraid_mbox_get_max_sg(adapter_t *); static void megaraid_mbox_enum_raid_scsi(adapter_t *); static void megaraid_mbox_flush_cache(adapter_t *); +static int megaraid_mbox_fire_sync_cmd(adapter_t *); static void megaraid_mbox_display_scb(adapter_t *, scb_t *); static void megaraid_mbox_setup_device_map(adapter_t *); @@ -137,7 +138,7 @@ static int wait_till_fw_empty(adapter_t *); -MODULE_AUTHOR("sju@lsil.com"); +MODULE_AUTHOR("megaraidlinux@lsi.com"); MODULE_DESCRIPTION("LSI Logic MegaRAID Mailbox Driver"); MODULE_LICENSE("GPL"); MODULE_VERSION(MEGARAID_VERSION); @@ -146,7 +147,7 @@ MODULE_VERSION(MEGARAID_VERSION); * ### modules parameters for driver ### */ -/** +/* * Set to enable driver to expose unconfigured disk to kernel */ static int megaraid_expose_unconf_disks = 0; @@ -154,7 +155,7 @@ module_param_named(unconf_disks, megaraid_expose_unconf_disks, int, 0); MODULE_PARM_DESC(unconf_disks, "Set to expose unconfigured disks to kernel (default=0)"); -/** +/* * driver wait time if the adapter's mailbox is busy */ static unsigned int max_mbox_busy_wait = MBOX_BUSY_WAIT; @@ -162,7 +163,7 @@ module_param_named(busy_wait, max_mbox_busy_wait, int, 0); MODULE_PARM_DESC(busy_wait, "Max wait for mailbox in microseconds if busy (default=10)"); -/** +/* * number of sectors per IO command */ static unsigned int megaraid_max_sectors = MBOX_MAX_SECTORS; @@ -170,7 +171,7 @@ module_param_named(max_sectors, megaraid_max_sectors, int, 0); MODULE_PARM_DESC(max_sectors, "Maximum number of sectors per IO command (default=128)"); -/** +/* * number of commands per logical unit */ static unsigned int megaraid_cmd_per_lun = MBOX_DEF_CMD_PER_LUN; @@ -179,7 +180,7 @@ MODULE_PARM_DESC(cmd_per_lun, "Maximum number of commands per logical unit (default=64)"); -/** +/* * Fast driver load option, skip scanning for physical devices during load. * This would result in non-disk devices being skipped during driver load * time. These can be later added though, using /proc/scsi/scsi @@ -190,7 +191,7 @@ MODULE_PARM_DESC(fast_load, "Faster loading of the driver, skips physical devices! (default=0)"); -/** +/* * mraid_debug level - threshold for amount of information to be displayed by * the driver. This level can be changed through modules parameters, ioctl or * sysfs/proc interface. By default, print the announcement messages only. @@ -337,7 +338,7 @@ static struct device_attribute *megaraid_sdev_attrs[] = { * * Return value: * actual depth set - **/ + */ static int megaraid_change_queue_depth(struct scsi_device *sdev, int qdepth) { if (qdepth > MBOX_MAX_SCSI_CMDS) @@ -369,8 +370,8 @@ static struct scsi_host_template megaraid_template_g = { * megaraid_init - module load hook * * We register ourselves as hotplug enabled module and let PCI subsystem - * discover our adaters - **/ + * discover our adapters. + */ static int __init megaraid_init(void) { @@ -405,7 +406,7 @@ megaraid_init(void) /** * megaraid_exit - driver unload entry point * - * We simply unwrap the megaraid_init routine here + * We simply unwrap the megaraid_init routine here. */ static void __exit megaraid_exit(void) @@ -421,12 +422,12 @@ megaraid_exit(void) /** * megaraid_probe_one - PCI hotplug entry point - * @param pdev : handle to this controller's PCI configuration space - * @param id : pci device id of the class of controllers + * @pdev : handle to this controller's PCI configuration space + * @id : pci device id of the class of controllers * * This routine should be called whenever a new adapter is detected by the * PCI hotplug susbsytem. - **/ + */ static int __devinit megaraid_probe_one(struct pci_dev *pdev, const struct pci_device_id *id) { @@ -542,16 +543,15 @@ out_probe_one: /** - * megaraid_detach_one - release the framework resources and call LLD release - * routine - * @param pdev : handle for our PCI cofiguration space + * megaraid_detach_one - release framework resources and call LLD release routine + * @pdev : handle for our PCI cofiguration space * * This routine is called during driver unload. We free all the allocated * resources and call the corresponding LLD so that it can also release all * its resources. * - * This routine is also called from the PCI hotplug system - **/ + * This routine is also called from the PCI hotplug system. + */ static void megaraid_detach_one(struct pci_dev *pdev) { @@ -615,9 +615,9 @@ megaraid_detach_one(struct pci_dev *pdev) /** * megaraid_mbox_shutdown - PCI shutdown for megaraid HBA - * @param device : generice driver model device + * @pdev : generic driver model device * - * Shutdown notification, perform flush cache + * Shutdown notification, perform flush cache. */ static void megaraid_mbox_shutdown(struct pci_dev *pdev) @@ -643,10 +643,10 @@ megaraid_mbox_shutdown(struct pci_dev *pdev) /** * megaraid_io_attach - attach a device with the IO subsystem - * @param adapter : controller's soft state + * @adapter : controller's soft state * - * Attach this device with the IO subsystem - **/ + * Attach this device with the IO subsystem. + */ static int megaraid_io_attach(adapter_t *adapter) { @@ -695,10 +695,10 @@ megaraid_io_attach(adapter_t *adapter) /** * megaraid_io_detach - detach a device from the IO subsystem - * @param adapter : controller's soft state + * @adapter : controller's soft state * - * Detach this device from the IO subsystem - **/ + * Detach this device from the IO subsystem. + */ static void megaraid_io_detach(adapter_t *adapter) { @@ -722,13 +722,13 @@ megaraid_io_detach(adapter_t *adapter) /** * megaraid_init_mbox - initialize controller - * @param adapter - our soft state + * @adapter : our soft state * - * . Allocate 16-byte aligned mailbox memory for firmware handshake - * . Allocate controller's memory resources - * . Find out all initialization data - * . Allocate memory required for all the commands - * . Use internal library of FW routines, build up complete soft state + * - Allocate 16-byte aligned mailbox memory for firmware handshake + * - Allocate controller's memory resources + * - Find out all initialization data + * - Allocate memory required for all the commands + * - Use internal library of FW routines, build up complete soft state */ static int __devinit megaraid_init_mbox(adapter_t *adapter) @@ -779,33 +779,39 @@ megaraid_init_mbox(adapter_t *adapter) goto out_release_regions; } - // - // Setup the rest of the soft state using the library of FW routines - // + /* initialize the mutual exclusion lock for the mailbox */ + spin_lock_init(&raid_dev->mailbox_lock); - // request IRQ and register the interrupt service routine + /* allocate memory required for commands */ + if (megaraid_alloc_cmd_packets(adapter) != 0) + goto out_iounmap; + + /* + * Issue SYNC cmd to flush the pending cmds in the adapter + * and initialize its internal state + */ + + if (megaraid_mbox_fire_sync_cmd(adapter)) + con_log(CL_ANN, ("megaraid: sync cmd failed\n")); + + /* + * Setup the rest of the soft state using the library of + * FW routines + */ + + /* request IRQ and register the interrupt service routine */ if (request_irq(adapter->irq, megaraid_isr, IRQF_SHARED, "megaraid", adapter)) { con_log(CL_ANN, (KERN_WARNING "megaraid: Couldn't register IRQ %d!\n", adapter->irq)); + goto out_alloc_cmds; - goto out_iounmap; - } - - - // initialize the mutual exclusion lock for the mailbox - spin_lock_init(&raid_dev->mailbox_lock); - - // allocate memory required for commands - if (megaraid_alloc_cmd_packets(adapter) != 0) { - goto out_free_irq; } // Product info - if (megaraid_mbox_product_info(adapter) != 0) { - goto out_alloc_cmds; - } + if (megaraid_mbox_product_info(adapter) != 0) + goto out_free_irq; // Do we support extended CDBs adapter->max_cdb_sz = 10; @@ -874,9 +880,8 @@ megaraid_init_mbox(adapter_t *adapter) * Allocate resources required to issue FW calls, when sysfs is * accessed */ - if (megaraid_sysfs_alloc_resources(adapter) != 0) { - goto out_alloc_cmds; - } + if (megaraid_sysfs_alloc_resources(adapter) != 0) + goto out_free_irq; // Set the DMA mask to 64-bit. All supported controllers as capable of // DMA in this range @@ -920,10 +925,10 @@ megaraid_init_mbox(adapter_t *adapter) out_free_sysfs_res: megaraid_sysfs_free_resources(adapter); -out_alloc_cmds: - megaraid_free_cmd_packets(adapter); out_free_irq: free_irq(adapter->irq, adapter); +out_alloc_cmds: + megaraid_free_cmd_packets(adapter); out_iounmap: iounmap(raid_dev->baseaddr); out_release_regions: @@ -937,7 +942,7 @@ out_free_raid_dev: /** * megaraid_fini_mbox - undo controller initialization - * @param adapter : our soft state + * @adapter : our soft state */ static void megaraid_fini_mbox(adapter_t *adapter) @@ -967,12 +972,12 @@ megaraid_fini_mbox(adapter_t *adapter) /** * megaraid_alloc_cmd_packets - allocate shared mailbox - * @param adapter : soft state of the raid controller + * @adapter : soft state of the raid controller * * Allocate and align the shared mailbox. This maibox is used to issue * all the commands. For IO based controllers, the mailbox is also regsitered * with the FW. Allocate memory for all commands as well. - * This is our big allocator + * This is our big allocator. */ static int megaraid_alloc_cmd_packets(adapter_t *adapter) @@ -1132,9 +1137,9 @@ out_free_common_mbox: /** * megaraid_free_cmd_packets - free memory - * @param adapter : soft state of the raid controller + * @adapter : soft state of the raid controller * - * Release memory resources allocated for commands + * Release memory resources allocated for commands. */ static void megaraid_free_cmd_packets(adapter_t *adapter) @@ -1156,10 +1161,10 @@ megaraid_free_cmd_packets(adapter_t *adapter) /** * megaraid_mbox_setup_dma_pools - setup dma pool for command packets - * @param adapter : HBA soft state + * @adapter : HBA soft state * - * setup the dma pools for mailbox, passthru and extended passthru structures, - * and scatter-gather lists + * Setup the dma pools for mailbox, passthru and extended passthru structures, + * and scatter-gather lists. */ static int megaraid_mbox_setup_dma_pools(adapter_t *adapter) @@ -1252,10 +1257,10 @@ fail_setup_dma_pool: /** * megaraid_mbox_teardown_dma_pools - teardown dma pools for command packets - * @param adapter : HBA soft state + * @adapter : HBA soft state * - * teardown the dma pool for mailbox, passthru and extended passthru - * structures, and scatter-gather lists + * Teardown the dma pool for mailbox, passthru and extended passthru + * structures, and scatter-gather lists. */ static void megaraid_mbox_teardown_dma_pools(adapter_t *adapter) @@ -1300,10 +1305,11 @@ megaraid_mbox_teardown_dma_pools(adapter_t *adapter) /** * megaraid_alloc_scb - detach and return a scb from the free list * @adapter : controller's soft state + * @scp : pointer to the scsi command to be executed * - * return the scb from the head of the free list. NULL if there are none - * available - **/ + * Return the scb from the head of the free list. %NULL if there are none + * available. + */ static scb_t * megaraid_alloc_scb(adapter_t *adapter, struct scsi_cmnd *scp) { @@ -1337,11 +1343,11 @@ megaraid_alloc_scb(adapter_t *adapter, struct scsi_cmnd *scp) * @adapter : controller's soft state * @scb : scb to be freed * - * return the scb back to the free list of scbs. The caller must 'flush' the + * Return the scb back to the free list of scbs. The caller must 'flush' the * SCB before calling us. E.g., performing pci_unamp and/or pci_sync etc. * NOTE NOTE: Make sure the scb is not on any list before calling this * routine. - **/ + */ static inline void megaraid_dealloc_scb(adapter_t *adapter, scb_t *scb) { @@ -1362,10 +1368,10 @@ megaraid_dealloc_scb(adapter_t *adapter, scb_t *scb) /** * megaraid_mbox_mksgl - make the scatter-gather list - * @adapter - controller's soft state - * @scb - scsi control block + * @adapter : controller's soft state + * @scb : scsi control block * - * prepare the scatter-gather list + * Prepare the scatter-gather list. */ static int megaraid_mbox_mksgl(adapter_t *adapter, scb_t *scb) @@ -1435,10 +1441,10 @@ megaraid_mbox_mksgl(adapter_t *adapter, scb_t *scb) /** * mbox_post_cmd - issue a mailbox command - * @adapter - controller's soft state - * @scb - command to be issued + * @adapter : controller's soft state + * @scb : command to be issued * - * post the command to the controller if mailbox is availble. + * Post the command to the controller if mailbox is available. */ static int mbox_post_cmd(adapter_t *adapter, scb_t *scb) @@ -1518,7 +1524,7 @@ mbox_post_cmd(adapter_t *adapter, scb_t *scb) * Queue entry point for mailbox based controllers. */ static int -megaraid_queue_command(struct scsi_cmnd *scp, void (* done)(struct scsi_cmnd *)) +megaraid_queue_command(struct scsi_cmnd *scp, void (*done)(struct scsi_cmnd *)) { adapter_t *adapter; scb_t *scb; @@ -1548,15 +1554,15 @@ megaraid_queue_command(struct scsi_cmnd *scp, void (* done)(struct scsi_cmnd *)) } /** - * megaraid_mbox_build_cmd - transform the mid-layer scsi command to megaraid - * firmware lingua - * @adapter - controller's soft state - * @scp - mid-layer scsi command pointer - * @busy - set if request could not be completed because of lack of + * megaraid_mbox_build_cmd - transform the mid-layer scsi commands + * @adapter : controller's soft state + * @scp : mid-layer scsi command pointer + * @busy : set if request could not be completed because of lack of * resources * - * convert the command issued by mid-layer to format understood by megaraid - * firmware. We also complete certain command without sending them to firmware + * Transform the mid-layer scsi command to megaraid firmware lingua. + * Convert the command issued by mid-layer to format understood by megaraid + * firmware. We also complete certain commands without sending them to firmware. */ static scb_t * megaraid_mbox_build_cmd(adapter_t *adapter, struct scsi_cmnd *scp, int *busy) @@ -1937,9 +1943,9 @@ megaraid_mbox_build_cmd(adapter_t *adapter, struct scsi_cmnd *scp, int *busy) /** * megaraid_mbox_runpendq - execute commands queued in the pending queue * @adapter : controller's soft state - * @scb : SCB to be queued in the pending list + * @scb_q : SCB to be queued in the pending list * - * scan the pending list for commands which are not yet issued and try to + * Scan the pending list for commands which are not yet issued and try to * post to the controller. The SCB can be a null pointer, which would indicate * no SCB to be queue, just try to execute the ones in the pending list. * @@ -2012,11 +2018,11 @@ megaraid_mbox_runpendq(adapter_t *adapter, scb_t *scb_q) /** * megaraid_mbox_prepare_pthru - prepare a command for physical devices - * @adapter - pointer to controller's soft state - * @scb - scsi control block - * @scp - scsi command from the mid-layer + * @adapter : pointer to controller's soft state + * @scb : scsi control block + * @scp : scsi command from the mid-layer * - * prepare a command for the scsi physical devices + * Prepare a command for the scsi physical devices. */ static void megaraid_mbox_prepare_pthru(adapter_t *adapter, scb_t *scb, @@ -2060,12 +2066,12 @@ megaraid_mbox_prepare_pthru(adapter_t *adapter, scb_t *scb, /** * megaraid_mbox_prepare_epthru - prepare a command for physical devices - * @adapter - pointer to controller's soft state - * @scb - scsi control block - * @scp - scsi command from the mid-layer + * @adapter : pointer to controller's soft state + * @scb : scsi control block + * @scp : scsi command from the mid-layer * - * prepare a command for the scsi physical devices. This rountine prepares - * commands for devices which can take extended CDBs (>10 bytes) + * Prepare a command for the scsi physical devices. This rountine prepares + * commands for devices which can take extended CDBs (>10 bytes). */ static void megaraid_mbox_prepare_epthru(adapter_t *adapter, scb_t *scb, @@ -2109,9 +2115,9 @@ megaraid_mbox_prepare_epthru(adapter_t *adapter, scb_t *scb, /** * megaraid_ack_sequence - interrupt ack sequence for memory mapped HBAs - * @adapter - controller's soft state + * @adapter : controller's soft state * - * Interrupt ackrowledgement sequence for memory mapped HBAs. Find out the + * Interrupt acknowledgement sequence for memory mapped HBAs. Find out the * completed command and put them on the completed list for later processing. * * Returns: 1 if the interrupt is valid, 0 otherwise @@ -2224,9 +2230,8 @@ megaraid_ack_sequence(adapter_t *adapter) /** * megaraid_isr - isr for memory based mailbox based controllers - * @irq - irq - * @devp - pointer to our soft state - * @regs - unused + * @irq : irq + * @devp : pointer to our soft state * * Interrupt service routine for memory-mapped mailbox controllers. */ @@ -2671,7 +2676,7 @@ megaraid_abort_handler(struct scsi_cmnd *scp) * the FW is still live, in which case the outstanding commands counter mut go * down to 0. If that happens, also issue the reservation reset command to * relinquish (possible) reservations on the logical drives connected to this - * host + * host. **/ static int megaraid_reset_handler(struct scsi_cmnd *scp) @@ -2823,11 +2828,11 @@ megaraid_reset_handler(struct scsi_cmnd *scp) /** * mbox_post_sync_cmd() - blocking command to the mailbox based controllers - * @adapter - controller's soft state - * @raw_mbox - the mailbox + * @adapter : controller's soft state + * @raw_mbox : the mailbox * * Issue a scb in synchronous and non-interrupt mode for mailbox based - * controllers + * controllers. */ static int mbox_post_sync_cmd(adapter_t *adapter, uint8_t raw_mbox[]) @@ -2955,12 +2960,12 @@ blocked_mailbox: /** * mbox_post_sync_cmd_fast - blocking command to the mailbox based controllers - * @adapter - controller's soft state - * @raw_mbox - the mailbox + * @adapter : controller's soft state + * @raw_mbox : the mailbox * * Issue a scb in synchronous and non-interrupt mode for mailbox based * controllers. This is a faster version of the synchronous command and - * therefore can be called in interrupt-context as well + * therefore can be called in interrupt-context as well. */ static int mbox_post_sync_cmd_fast(adapter_t *adapter, uint8_t raw_mbox[]) @@ -3008,10 +3013,10 @@ mbox_post_sync_cmd_fast(adapter_t *adapter, uint8_t raw_mbox[]) /** * megaraid_busywait_mbox() - Wait until the controller's mailbox is available - * @raid_dev - RAID device (HBA) soft state + * @raid_dev : RAID device (HBA) soft state * - * wait until the controller's mailbox is available to accept more commands. - * wait for at most 1 second + * Wait until the controller's mailbox is available to accept more commands. + * Wait for at most 1 second. */ static int megaraid_busywait_mbox(mraid_device_t *raid_dev) @@ -3032,9 +3037,9 @@ megaraid_busywait_mbox(mraid_device_t *raid_dev) /** * megaraid_mbox_product_info - some static information about the controller - * @adapter - our soft state + * @adapter : our soft state * - * issue commands to the controller to grab some parameters required by our + * Issue commands to the controller to grab some parameters required by our * caller. */ static int @@ -3157,10 +3162,10 @@ megaraid_mbox_product_info(adapter_t *adapter) /** * megaraid_mbox_extended_cdb - check for support for extended CDBs - * @adapter - soft state for the controller + * @adapter : soft state for the controller * - * this routine check whether the controller in question supports extended - * ( > 10 bytes ) CDBs + * This routine check whether the controller in question supports extended + * ( > 10 bytes ) CDBs. */ static int megaraid_mbox_extended_cdb(adapter_t *adapter) @@ -3193,8 +3198,8 @@ megaraid_mbox_extended_cdb(adapter_t *adapter) /** * megaraid_mbox_support_ha - Do we support clustering - * @adapter - soft state for the controller - * @init_id - ID of the initiator + * @adapter : soft state for the controller + * @init_id : ID of the initiator * * Determine if the firmware supports clustering and the ID of the initiator. */ @@ -3236,9 +3241,9 @@ megaraid_mbox_support_ha(adapter_t *adapter, uint16_t *init_id) /** * megaraid_mbox_support_random_del - Do we support random deletion - * @adapter - soft state for the controller + * @adapter : soft state for the controller * - * Determine if the firmware supports random deletion + * Determine if the firmware supports random deletion. * Return: 1 is operation supported, 0 otherwise */ static int @@ -3271,10 +3276,10 @@ megaraid_mbox_support_random_del(adapter_t *adapter) /** * megaraid_mbox_get_max_sg - maximum sg elements supported by the firmware - * @adapter - soft state for the controller + * @adapter : soft state for the controller * * Find out the maximum number of scatter-gather elements supported by the - * firmware + * firmware. */ static int megaraid_mbox_get_max_sg(adapter_t *adapter) @@ -3311,10 +3316,10 @@ megaraid_mbox_get_max_sg(adapter_t *adapter) /** * megaraid_mbox_enum_raid_scsi - enumerate the RAID and SCSI channels - * @adapter - soft state for the controller + * @adapter : soft state for the controller * - * Enumerate the RAID and SCSI channels for ROMB platoforms so that channels - * can be exported as regular SCSI channels + * Enumerate the RAID and SCSI channels for ROMB platforms so that channels + * can be exported as regular SCSI channels. */ static void megaraid_mbox_enum_raid_scsi(adapter_t *adapter) @@ -3348,9 +3353,9 @@ megaraid_mbox_enum_raid_scsi(adapter_t *adapter) /** * megaraid_mbox_flush_cache - flush adapter and disks cache - * @param adapter : soft state for the controller + * @adapter : soft state for the controller * - * Flush adapter cache followed by disks cache + * Flush adapter cache followed by disks cache. */ static void megaraid_mbox_flush_cache(adapter_t *adapter) @@ -3380,13 +3385,91 @@ megaraid_mbox_flush_cache(adapter_t *adapter) /** + * megaraid_mbox_fire_sync_cmd - fire the sync cmd + * @adapter : soft state for the controller + * + * Clears the pending cmds in FW and reinits its RAID structs. + */ +static int +megaraid_mbox_fire_sync_cmd(adapter_t *adapter) +{ + mbox_t *mbox; + uint8_t raw_mbox[sizeof(mbox_t)]; + mraid_device_t *raid_dev = ADAP2RAIDDEV(adapter); + mbox64_t *mbox64; + int status = 0; + int i; + uint32_t dword; + + mbox = (mbox_t *)raw_mbox; + + memset((caddr_t)raw_mbox, 0, sizeof(mbox_t)); + + raw_mbox[0] = 0xFF; + + mbox64 = raid_dev->mbox64; + mbox = raid_dev->mbox; + + /* Wait until mailbox is free */ + if (megaraid_busywait_mbox(raid_dev) != 0) { + status = 1; + goto blocked_mailbox; + } + + /* Copy mailbox data into host structure */ + memcpy((caddr_t)mbox, (caddr_t)raw_mbox, 16); + mbox->cmdid = 0xFE; + mbox->busy = 1; + mbox->poll = 0; + mbox->ack = 0; + mbox->numstatus = 0; + mbox->status = 0; + + wmb(); + WRINDOOR(raid_dev, raid_dev->mbox_dma | 0x1); + + /* Wait for maximum 1 min for status to post. + * If the Firmware SUPPORTS the ABOVE COMMAND, + * mbox->cmd will be set to 0 + * else + * the firmware will reject the command with + * mbox->numstatus set to 1 + */ + + i = 0; + status = 0; + while (!mbox->numstatus && mbox->cmd == 0xFF) { + rmb(); + msleep(1); + i++; + if (i > 1000 * 60) { + status = 1; + break; + } + } + if (mbox->numstatus == 1) + status = 1; /*cmd not supported*/ + + /* Check for interrupt line */ + dword = RDOUTDOOR(raid_dev); + WROUTDOOR(raid_dev, dword); + WRINDOOR(raid_dev,2); + + return status; + +blocked_mailbox: + con_log(CL_ANN, (KERN_WARNING "megaraid: blocked mailbox\n")); + return status; +} + +/** * megaraid_mbox_display_scb - display SCB information, mostly debug purposes - * @param adapter : controllers' soft state - * @param scb : SCB to be displayed - * @param level : debug level for console print + * @adapter : controller's soft state + * @scb : SCB to be displayed + * @level : debug level for console print * * Diplay information about the given SCB iff the current debug level is - * verbose + * verbose. */ static void megaraid_mbox_display_scb(adapter_t *adapter, scb_t *scb) @@ -3434,7 +3517,7 @@ megaraid_mbox_display_scb(adapter_t *adapter, scb_t *scb) * scsi addresses and megaraid scsi and logical drive addresses. We export * scsi devices on their actual addresses, whereas the logical drives are * exported on a virtual scsi channel. - **/ + */ static void megaraid_mbox_setup_device_map(adapter_t *adapter) { @@ -3472,7 +3555,7 @@ megaraid_mbox_setup_device_map(adapter_t *adapter) /** * megaraid_cmm_register - register with the mangement module - * @param adapter : HBA soft state + * @adapter : HBA soft state * * Register with the management module, which allows applications to issue * ioctl calls to the drivers. This interface is used by the management module @@ -3562,11 +3645,11 @@ megaraid_cmm_register(adapter_t *adapter) /** * megaraid_cmm_unregister - un-register with the mangement module - * @param adapter : HBA soft state + * @adapter : HBA soft state * * Un-register with the management module. * FIXME: mgmt module must return failure for unregister if it has pending - * commands in LLD + * commands in LLD. */ static int megaraid_cmm_unregister(adapter_t *adapter) @@ -3579,9 +3662,9 @@ megaraid_cmm_unregister(adapter_t *adapter) /** * megaraid_mbox_mm_handler - interface for CMM to issue commands to LLD - * @param drvr_data : LLD specific data - * @param kioc : CMM interface packet - * @param action : command action + * @drvr_data : LLD specific data + * @kioc : CMM interface packet + * @action : command action * * This routine is invoked whenever the Common Mangement Module (CMM) has a * command for us. The 'action' parameter specifies if this is a new command @@ -3634,8 +3717,8 @@ megaraid_mbox_mm_handler(unsigned long drvr_data, uioc_t *kioc, uint32_t action) /** * megaraid_mbox_mm_command - issues commands routed through CMM - * @param adapter : HBA soft state - * @param kioc : management command packet + * @adapter : HBA soft state + * @kioc : management command packet * * Issues commands, which are routed through the management module. */ @@ -3804,8 +3887,8 @@ megaraid_mbox_mm_done(adapter_t *adapter, scb_t *scb) /** * gather_hbainfo - HBA characteristics for the applications - * @param adapter : HBA soft state - * @param hinfo : pointer to the caller's host info strucuture + * @adapter : HBA soft state + * @hinfo : pointer to the caller's host info strucuture */ static int gather_hbainfo(adapter_t *adapter, mraid_hba_info_t *hinfo) @@ -3839,16 +3922,15 @@ gather_hbainfo(adapter_t *adapter, mraid_hba_info_t *hinfo) /** * megaraid_sysfs_alloc_resources - allocate sysfs related resources + * @adapter : controller's soft state * * Allocate packets required to issue FW calls whenever the sysfs attributes * are read. These attributes would require up-to-date information from the * FW. Also set up resources for mutual exclusion to share these resources and * the wait queue. * - * @param adapter : controller's soft state - * - * @return 0 on success - * @return -ERROR_CODE on failure + * Return 0 on success. + * Return -ERROR_CODE on failure. */ static int megaraid_sysfs_alloc_resources(adapter_t *adapter) @@ -3885,10 +3967,9 @@ megaraid_sysfs_alloc_resources(adapter_t *adapter) /** * megaraid_sysfs_free_resources - free sysfs related resources + * @adapter : controller's soft state * * Free packets allocated for sysfs FW commands - * - * @param adapter : controller's soft state */ static void megaraid_sysfs_free_resources(adapter_t *adapter) @@ -3907,10 +3988,9 @@ megaraid_sysfs_free_resources(adapter_t *adapter) /** * megaraid_sysfs_get_ldmap_done - callback for get ldmap + * @uioc : completed packet * * Callback routine called in the ISR/tasklet context for get ldmap call - * - * @param uioc : completed packet */ static void megaraid_sysfs_get_ldmap_done(uioc_t *uioc) @@ -3926,12 +4006,11 @@ megaraid_sysfs_get_ldmap_done(uioc_t *uioc) /** * megaraid_sysfs_get_ldmap_timeout - timeout handling for get ldmap + * @data : timed out packet * * Timeout routine to recover and return to application, in case the adapter - * has stopped responding. A timeout of 60 seconds for this command seem like - * a good value - * - * @param uioc : timed out packet + * has stopped responding. A timeout of 60 seconds for this command seems like + * a good value. */ static void megaraid_sysfs_get_ldmap_timeout(unsigned long data) @@ -3948,6 +4027,7 @@ megaraid_sysfs_get_ldmap_timeout(unsigned long data) /** * megaraid_sysfs_get_ldmap - get update logical drive map + * @adapter : controller's soft state * * This routine will be called whenever user reads the logical drive * attributes, go get the current logical drive mapping table from the @@ -3959,10 +4039,8 @@ megaraid_sysfs_get_ldmap_timeout(unsigned long data) * standalone libary. For now, this should suffice since there is no other * user of this interface. * - * @param adapter : controller's soft state - * - * @return 0 on success - * @return -1 on failure + * Return 0 on success. + * Return -1 on failure. */ static int megaraid_sysfs_get_ldmap(adapter_t *adapter) @@ -4064,13 +4142,12 @@ megaraid_sysfs_get_ldmap(adapter_t *adapter) /** * megaraid_sysfs_show_app_hndl - display application handle for this adapter + * @cdev : class device object representation for the host + * @buf : buffer to send data to * * Display the handle used by the applications while executing management * tasks on the adapter. We invoke a management module API to get the adapter * handle, since we do not interface with applications directly. - * - * @param cdev : class device object representation for the host - * @param buf : buffer to send data to */ static ssize_t megaraid_sysfs_show_app_hndl(struct class_device *cdev, char *buf) @@ -4087,16 +4164,18 @@ megaraid_sysfs_show_app_hndl(struct class_device *cdev, char *buf) /** * megaraid_sysfs_show_ldnum - display the logical drive number for this device + * @dev : device object representation for the scsi device + * @attr : device attribute to show + * @buf : buffer to send data to * * Display the logical drive number for the device in question, if it a valid - * logical drive. For physical devices, "-1" is returned - * The logical drive number is displayed in following format + * logical drive. For physical devices, "-1" is returned. + * + * The logical drive number is displayed in following format: * * <SCSI ID> <LD NUM> <LD STICKY ID> <APP ADAPTER HANDLE> - * <int> <int> <int> <int> * - * @param dev : device object representation for the scsi device - * @param buf : buffer to send data to + * <int> <int> <int> <int> */ static ssize_t megaraid_sysfs_show_ldnum(struct device *dev, struct device_attribute *attr, char *buf) |