diff options
Diffstat (limited to 'drivers/regulator/bd718x7-regulator.c')
| -rw-r--r-- | drivers/regulator/bd718x7-regulator.c | 369 |
1 files changed, 260 insertions, 109 deletions
diff --git a/drivers/regulator/bd718x7-regulator.c b/drivers/regulator/bd718x7-regulator.c index b1eb46961993..d60fccedb250 100644 --- a/drivers/regulator/bd718x7-regulator.c +++ b/drivers/regulator/bd718x7-regulator.c @@ -55,7 +55,8 @@ #define BD718XX_HWOPNAME(swopname) swopname##_hwcontrol #define BD718XX_OPS(name, _list_voltage, _map_voltage, _set_voltage_sel, \ - _get_voltage_sel, _set_voltage_time_sel, _set_ramp_delay) \ + _get_voltage_sel, _set_voltage_time_sel, _set_ramp_delay, \ + _set_uvp, _set_ovp) \ static const struct regulator_ops name = { \ .enable = regulator_enable_regmap, \ .disable = regulator_disable_regmap, \ @@ -66,6 +67,8 @@ static const struct regulator_ops name = { \ .get_voltage_sel = (_get_voltage_sel), \ .set_voltage_time_sel = (_set_voltage_time_sel), \ .set_ramp_delay = (_set_ramp_delay), \ + .set_under_voltage_protection = (_set_uvp), \ + .set_over_voltage_protection = (_set_ovp), \ }; \ \ static const struct regulator_ops BD718XX_HWOPNAME(name) = { \ @@ -76,6 +79,8 @@ static const struct regulator_ops BD718XX_HWOPNAME(name) = { \ .get_voltage_sel = (_get_voltage_sel), \ .set_voltage_time_sel = (_set_voltage_time_sel), \ .set_ramp_delay = (_set_ramp_delay), \ + .set_under_voltage_protection = (_set_uvp), \ + .set_over_voltage_protection = (_set_ovp), \ } \ /* @@ -154,17 +159,9 @@ static void voltage_change_done(struct regulator_dev *rdev, unsigned int sel, * exceed it due to the scheduling. */ msleep(1); - /* - * Note for next hacker. The PWRGOOD should not be masked on - * BD71847 so we will just unconditionally enable detection - * when voltage is set. - * If someone want's to disable PWRGOOD he must implement - * caching and restoring the old value here. I am not - * aware of such use-cases so for the sake of the simplicity - * we just always enable PWRGOOD here. - */ - ret = regmap_update_bits(rdev->regmap, BD718XX_REG_MVRFLTMASK2, - *mask, 0); + + ret = regmap_clear_bits(rdev->regmap, BD718XX_REG_MVRFLTMASK2, + *mask); if (ret) dev_err(&rdev->dev, "Failed to re-enable voltage monitoring (%d)\n", @@ -208,12 +205,27 @@ static int voltage_change_prepare(struct regulator_dev *rdev, unsigned int sel, * time configurable. */ if (new > now) { + int tmp; + int prot_bit; int ldo_offset = rdev->desc->id - BD718XX_LDO1; - *mask = BD718XX_LDO1_VRMON80 << ldo_offset; - ret = regmap_update_bits(rdev->regmap, - BD718XX_REG_MVRFLTMASK2, - *mask, *mask); + prot_bit = BD718XX_LDO1_VRMON80 << ldo_offset; + ret = regmap_read(rdev->regmap, BD718XX_REG_MVRFLTMASK2, + &tmp); + if (ret) { + dev_err(&rdev->dev, + "Failed to read voltage monitoring state\n"); + return ret; + } + + if (!(tmp & prot_bit)) { + /* We disable protection if it was enabled... */ + ret = regmap_set_bits(rdev->regmap, + BD718XX_REG_MVRFLTMASK2, + prot_bit); + /* ...and we also want to re-enable it */ + *mask = prot_bit; + } if (ret) { dev_err(&rdev->dev, "Failed to stop voltage monitoring\n"); @@ -267,99 +279,6 @@ static int bd71837_set_voltage_sel_pickable_restricted( } /* - * OPS common for BD71847 and BD71850 - */ -BD718XX_OPS(bd718xx_pickable_range_ldo_ops, - regulator_list_voltage_pickable_linear_range, NULL, - bd718xx_set_voltage_sel_pickable_restricted, - regulator_get_voltage_sel_pickable_regmap, NULL, NULL); - -/* BD71847 and BD71850 LDO 5 is by default OFF at RUN state */ -static const struct regulator_ops bd718xx_ldo5_ops_hwstate = { - .is_enabled = never_enabled_by_hwstate, - .list_voltage = regulator_list_voltage_pickable_linear_range, - .set_voltage_sel = bd718xx_set_voltage_sel_pickable_restricted, - .get_voltage_sel = regulator_get_voltage_sel_pickable_regmap, -}; - -BD718XX_OPS(bd718xx_pickable_range_buck_ops, - regulator_list_voltage_pickable_linear_range, NULL, - regulator_set_voltage_sel_pickable_regmap, - regulator_get_voltage_sel_pickable_regmap, - regulator_set_voltage_time_sel, NULL); - -BD718XX_OPS(bd718xx_ldo_regulator_ops, regulator_list_voltage_linear_range, - NULL, bd718xx_set_voltage_sel_restricted, - regulator_get_voltage_sel_regmap, NULL, NULL); - -BD718XX_OPS(bd718xx_ldo_regulator_nolinear_ops, regulator_list_voltage_table, - NULL, bd718xx_set_voltage_sel_restricted, - regulator_get_voltage_sel_regmap, NULL, NULL); - -BD718XX_OPS(bd718xx_buck_regulator_ops, regulator_list_voltage_linear_range, - NULL, regulator_set_voltage_sel_regmap, - regulator_get_voltage_sel_regmap, regulator_set_voltage_time_sel, - NULL); - -BD718XX_OPS(bd718xx_buck_regulator_nolinear_ops, regulator_list_voltage_table, - regulator_map_voltage_ascend, regulator_set_voltage_sel_regmap, - regulator_get_voltage_sel_regmap, regulator_set_voltage_time_sel, - NULL); - -/* - * OPS for BD71837 - */ -BD718XX_OPS(bd71837_pickable_range_ldo_ops, - regulator_list_voltage_pickable_linear_range, NULL, - bd71837_set_voltage_sel_pickable_restricted, - regulator_get_voltage_sel_pickable_regmap, NULL, NULL); - -BD718XX_OPS(bd71837_pickable_range_buck_ops, - regulator_list_voltage_pickable_linear_range, NULL, - bd71837_set_voltage_sel_pickable_restricted, - regulator_get_voltage_sel_pickable_regmap, - regulator_set_voltage_time_sel, NULL); - -BD718XX_OPS(bd71837_ldo_regulator_ops, regulator_list_voltage_linear_range, - NULL, bd71837_set_voltage_sel_restricted, - regulator_get_voltage_sel_regmap, NULL, NULL); - -BD718XX_OPS(bd71837_ldo_regulator_nolinear_ops, regulator_list_voltage_table, - NULL, bd71837_set_voltage_sel_restricted, - regulator_get_voltage_sel_regmap, NULL, NULL); - -BD718XX_OPS(bd71837_buck_regulator_ops, regulator_list_voltage_linear_range, - NULL, bd71837_set_voltage_sel_restricted, - regulator_get_voltage_sel_regmap, regulator_set_voltage_time_sel, - NULL); - -BD718XX_OPS(bd71837_buck_regulator_nolinear_ops, regulator_list_voltage_table, - regulator_map_voltage_ascend, bd71837_set_voltage_sel_restricted, - regulator_get_voltage_sel_regmap, regulator_set_voltage_time_sel, - NULL); -/* - * BD71837 bucks 3 and 4 support defining their enable/disable state also - * when buck enable state is under HW state machine control. In that case the - * bit [2] in CTRL register is used to indicate if regulator should be ON. - */ -static const struct regulator_ops bd71837_buck34_ops_hwctrl = { - .is_enabled = bd71837_get_buck34_enable_hwctrl, - .list_voltage = regulator_list_voltage_linear_range, - .set_voltage_sel = regulator_set_voltage_sel_regmap, - .get_voltage_sel = regulator_get_voltage_sel_regmap, - .set_voltage_time_sel = regulator_set_voltage_time_sel, - .set_ramp_delay = regulator_set_ramp_delay_regmap, -}; - -/* - * OPS for all of the ICs - BD718(37/47/50) - */ -BD718XX_OPS(bd718xx_dvs_buck_regulator_ops, regulator_list_voltage_linear_range, - NULL, regulator_set_voltage_sel_regmap, - regulator_get_voltage_sel_regmap, regulator_set_voltage_time_sel, - /* bd718xx_buck1234_set_ramp_delay */ regulator_set_ramp_delay_regmap); - -/* * BD71837 BUCK1/2/3/4 * BD71847 BUCK1/2 * 0.70 to 1.30V (10mV step) @@ -536,6 +455,238 @@ struct bd718xx_regulator_data { int additional_init_amnt; }; +static int bd718x7_xvp_sanity_check(struct regulator_dev *rdev, int lim_uV, + int severity) +{ + /* + * BD71837/47/50 ... (ICs supported by this driver) do not provide + * warnings, only protection + */ + if (severity != REGULATOR_SEVERITY_PROT) { + dev_err(&rdev->dev, + "Unsupported Under Voltage protection level\n"); + return -EINVAL; + } + + /* + * And protection limit is not changeable. It can only be enabled + * or disabled + */ + if (lim_uV) + return -EINVAL; + + return 0; +} + +static int bd718x7_set_ldo_uvp(struct regulator_dev *rdev, int lim_uV, + int severity, bool enable) +{ + int ldo_offset = rdev->desc->id - BD718XX_LDO1; + int prot_bit, ret; + + ret = bd718x7_xvp_sanity_check(rdev, lim_uV, severity); + if (ret) + return ret; + + prot_bit = BD718XX_LDO1_VRMON80 << ldo_offset; + + if (enable) + return regmap_clear_bits(rdev->regmap, BD718XX_REG_MVRFLTMASK2, + prot_bit); + + return regmap_set_bits(rdev->regmap, BD718XX_REG_MVRFLTMASK2, + prot_bit); +} + +static int bd718x7_get_buck_prot_reg(int id, int *reg) +{ + + if (id > BD718XX_BUCK8) { + WARN_ON(id > BD718XX_BUCK8); + return -EINVAL; + } + + if (id > BD718XX_BUCK4) + *reg = BD718XX_REG_MVRFLTMASK0; + else + *reg = BD718XX_REG_MVRFLTMASK1; + + return 0; +} + +static int bd718x7_get_buck_ovp_info(int id, int *reg, int *bit) +{ + int ret; + + ret = bd718x7_get_buck_prot_reg(id, reg); + if (ret) + return ret; + + *bit = BIT((id % 4) * 2 + 1); + + return 0; +} + +static int bd718x7_get_buck_uvp_info(int id, int *reg, int *bit) +{ + int ret; + + ret = bd718x7_get_buck_prot_reg(id, reg); + if (ret) + return ret; + + *bit = BIT((id % 4) * 2); + + return 0; +} + +static int bd718x7_set_buck_uvp(struct regulator_dev *rdev, int lim_uV, + int severity, bool enable) +{ + int bit, reg, ret; + + ret = bd718x7_xvp_sanity_check(rdev, lim_uV, severity); + if (ret) + return ret; + + ret = bd718x7_get_buck_uvp_info(rdev->desc->id, ®, &bit); + if (ret) + return ret; + + if (enable) + return regmap_clear_bits(rdev->regmap, reg, bit); + + return regmap_set_bits(rdev->regmap, reg, bit); + +} + +static int bd718x7_set_buck_ovp(struct regulator_dev *rdev, int lim_uV, + int severity, + bool enable) +{ + int bit, reg, ret; + + ret = bd718x7_xvp_sanity_check(rdev, lim_uV, severity); + if (ret) + return ret; + + ret = bd718x7_get_buck_ovp_info(rdev->desc->id, ®, &bit); + if (ret) + return ret; + + if (enable) + return regmap_clear_bits(rdev->regmap, reg, bit); + + return regmap_set_bits(rdev->regmap, reg, bit); +} + +/* + * OPS common for BD71847 and BD71850 + */ +BD718XX_OPS(bd718xx_pickable_range_ldo_ops, + regulator_list_voltage_pickable_linear_range, NULL, + bd718xx_set_voltage_sel_pickable_restricted, + regulator_get_voltage_sel_pickable_regmap, NULL, NULL, + bd718x7_set_ldo_uvp, NULL); + +/* BD71847 and BD71850 LDO 5 is by default OFF at RUN state */ +static const struct regulator_ops bd718xx_ldo5_ops_hwstate = { + .is_enabled = never_enabled_by_hwstate, + .list_voltage = regulator_list_voltage_pickable_linear_range, + .set_voltage_sel = bd718xx_set_voltage_sel_pickable_restricted, + .get_voltage_sel = regulator_get_voltage_sel_pickable_regmap, + .set_under_voltage_protection = bd718x7_set_ldo_uvp, +}; + +BD718XX_OPS(bd718xx_pickable_range_buck_ops, + regulator_list_voltage_pickable_linear_range, NULL, + regulator_set_voltage_sel_pickable_regmap, + regulator_get_voltage_sel_pickable_regmap, + regulator_set_voltage_time_sel, NULL, bd718x7_set_buck_uvp, + bd718x7_set_buck_ovp); + +BD718XX_OPS(bd718xx_ldo_regulator_ops, regulator_list_voltage_linear_range, + NULL, bd718xx_set_voltage_sel_restricted, + regulator_get_voltage_sel_regmap, NULL, NULL, bd718x7_set_ldo_uvp, + NULL); + +BD718XX_OPS(bd718xx_ldo_regulator_nolinear_ops, regulator_list_voltage_table, + NULL, bd718xx_set_voltage_sel_restricted, + regulator_get_voltage_sel_regmap, NULL, NULL, bd718x7_set_ldo_uvp, + NULL); + +BD718XX_OPS(bd718xx_buck_regulator_ops, regulator_list_voltage_linear_range, + NULL, regulator_set_voltage_sel_regmap, + regulator_get_voltage_sel_regmap, regulator_set_voltage_time_sel, + NULL, bd718x7_set_buck_uvp, bd718x7_set_buck_ovp); + +BD718XX_OPS(bd718xx_buck_regulator_nolinear_ops, regulator_list_voltage_table, + regulator_map_voltage_ascend, regulator_set_voltage_sel_regmap, + regulator_get_voltage_sel_regmap, regulator_set_voltage_time_sel, + NULL, bd718x7_set_buck_uvp, bd718x7_set_buck_ovp); + +/* + * OPS for BD71837 + */ +BD718XX_OPS(bd71837_pickable_range_ldo_ops, + regulator_list_voltage_pickable_linear_range, NULL, + bd71837_set_voltage_sel_pickable_restricted, + regulator_get_voltage_sel_pickable_regmap, NULL, NULL, + bd718x7_set_ldo_uvp, NULL); + +BD718XX_OPS(bd71837_pickable_range_buck_ops, + regulator_list_voltage_pickable_linear_range, NULL, + bd71837_set_voltage_sel_pickable_restricted, + regulator_get_voltage_sel_pickable_regmap, + regulator_set_voltage_time_sel, NULL, bd718x7_set_buck_uvp, + bd718x7_set_buck_ovp); + +BD718XX_OPS(bd71837_ldo_regulator_ops, regulator_list_voltage_linear_range, + NULL, bd71837_set_voltage_sel_restricted, + regulator_get_voltage_sel_regmap, NULL, NULL, bd718x7_set_ldo_uvp, + NULL); + +BD718XX_OPS(bd71837_ldo_regulator_nolinear_ops, regulator_list_voltage_table, + NULL, bd71837_set_voltage_sel_restricted, + regulator_get_voltage_sel_regmap, NULL, NULL, bd718x7_set_ldo_uvp, + NULL); + +BD718XX_OPS(bd71837_buck_regulator_ops, regulator_list_voltage_linear_range, + NULL, bd71837_set_voltage_sel_restricted, + regulator_get_voltage_sel_regmap, regulator_set_voltage_time_sel, + NULL, bd718x7_set_buck_uvp, bd718x7_set_buck_ovp); + +BD718XX_OPS(bd71837_buck_regulator_nolinear_ops, regulator_list_voltage_table, + regulator_map_voltage_ascend, bd71837_set_voltage_sel_restricted, + regulator_get_voltage_sel_regmap, regulator_set_voltage_time_sel, + NULL, bd718x7_set_buck_uvp, bd718x7_set_buck_ovp); +/* + * BD71837 bucks 3 and 4 support defining their enable/disable state also + * when buck enable state is under HW state machine control. In that case the + * bit [2] in CTRL register is used to indicate if regulator should be ON. + */ +static const struct regulator_ops bd71837_buck34_ops_hwctrl = { + .is_enabled = bd71837_get_buck34_enable_hwctrl, + .list_voltage = regulator_list_voltage_linear_range, + .set_voltage_sel = regulator_set_voltage_sel_regmap, + .get_voltage_sel = regulator_get_voltage_sel_regmap, + .set_voltage_time_sel = regulator_set_voltage_time_sel, + .set_ramp_delay = regulator_set_ramp_delay_regmap, + .set_under_voltage_protection = bd718x7_set_buck_uvp, + .set_over_voltage_protection = bd718x7_set_buck_ovp, +}; + +/* + * OPS for all of the ICs - BD718(37/47/50) + */ +BD718XX_OPS(bd718xx_dvs_buck_regulator_ops, regulator_list_voltage_linear_range, + NULL, regulator_set_voltage_sel_regmap, + regulator_get_voltage_sel_regmap, regulator_set_voltage_time_sel, + regulator_set_ramp_delay_regmap, bd718x7_set_buck_uvp, + bd718x7_set_buck_ovp); + + + /* * There is a HW quirk in BD71837. The shutdown sequence timings for * bucks/LDOs which are controlled via register interface are changed. |