summaryrefslogtreecommitdiff
path: root/drivers/net/wireless/intersil/orinoco/orinoco_tmd.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/net/wireless/intersil/orinoco/orinoco_tmd.c')
-rw-r--r--drivers/net/wireless/intersil/orinoco/orinoco_tmd.c237
1 files changed, 0 insertions, 237 deletions
diff --git a/drivers/net/wireless/intersil/orinoco/orinoco_tmd.c b/drivers/net/wireless/intersil/orinoco/orinoco_tmd.c
deleted file mode 100644
index 939d5a1dce97..000000000000
--- a/drivers/net/wireless/intersil/orinoco/orinoco_tmd.c
+++ /dev/null
@@ -1,237 +0,0 @@
-/* orinoco_tmd.c
- *
- * Driver for Prism II devices which would usually be driven by orinoco_cs,
- * but are connected to the PCI bus by a TMD7160.
- *
- * Copyright (C) 2003 Joerg Dorchain <joerg AT dorchain.net>
- * based heavily upon orinoco_plx.c Copyright (C) 2001 Daniel Barlow
- *
- * The contents of this file are subject to the Mozilla Public License
- * Version 1.1 (the "License"); you may not use this file except in
- * compliance with the License. You may obtain a copy of the License
- * at http://www.mozilla.org/MPL/
- *
- * Software distributed under the License is distributed on an "AS IS"
- * basis, WITHOUT WARRANTY OF ANY KIND, either express or implied. See
- * the License for the specific language governing rights and
- * limitations under the License.
- *
- * Alternatively, the contents of this file may be used under the
- * terms of the GNU General Public License version 2 (the "GPL"), in
- * which case the provisions of the GPL are applicable instead of the
- * above. If you wish to allow the use of your version of this file
- * only under the terms of the GPL and not to allow others to use your
- * version of this file under the MPL, indicate your decision by
- * deleting the provisions above and replace them with the notice and
- * other provisions required by the GPL. If you do not delete the
- * provisions above, a recipient may use your version of this file
- * under either the MPL or the GPL.
- *
- * The actual driving is done by main.c, this is just resource
- * allocation stuff.
- *
- * This driver is modeled after the orinoco_plx driver. The main
- * difference is that the TMD chip has only IO port ranges and doesn't
- * provide access to the PCMCIA attribute space.
- *
- * Pheecom sells cards with the TMD chip as "ASIC version"
- */
-
-#define DRIVER_NAME "orinoco_tmd"
-#define PFX DRIVER_NAME ": "
-
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/delay.h>
-#include <linux/pci.h>
-#include <pcmcia/cisreg.h>
-
-#include "orinoco.h"
-#include "orinoco_pci.h"
-
-#define COR_VALUE (COR_LEVEL_REQ | COR_FUNC_ENA) /* Enable PC card with interrupt in level trigger */
-#define COR_RESET (0x80) /* reset bit in the COR register */
-#define TMD_RESET_TIME (500) /* milliseconds */
-
-/*
- * Do a soft reset of the card using the Configuration Option Register
- */
-static int orinoco_tmd_cor_reset(struct orinoco_private *priv)
-{
- struct hermes *hw = &priv->hw;
- struct orinoco_pci_card *card = priv->card;
- unsigned long timeout;
- u16 reg;
-
- iowrite8(COR_VALUE | COR_RESET, card->bridge_io);
- mdelay(1);
-
- iowrite8(COR_VALUE, card->bridge_io);
- mdelay(1);
-
- /* Just in case, wait more until the card is no longer busy */
- timeout = jiffies + msecs_to_jiffies(TMD_RESET_TIME);
- reg = hermes_read_regn(hw, CMD);
- while (time_before(jiffies, timeout) && (reg & HERMES_CMD_BUSY)) {
- mdelay(1);
- reg = hermes_read_regn(hw, CMD);
- }
-
- /* Still busy? */
- if (reg & HERMES_CMD_BUSY) {
- printk(KERN_ERR PFX "Busy timeout\n");
- return -ETIMEDOUT;
- }
-
- return 0;
-}
-
-
-static int orinoco_tmd_init_one(struct pci_dev *pdev,
- const struct pci_device_id *ent)
-{
- int err;
- struct orinoco_private *priv;
- struct orinoco_pci_card *card;
- void __iomem *hermes_io, *bridge_io;
-
- err = pci_enable_device(pdev);
- if (err) {
- printk(KERN_ERR PFX "Cannot enable PCI device\n");
- return err;
- }
-
- err = pci_request_regions(pdev, DRIVER_NAME);
- if (err) {
- printk(KERN_ERR PFX "Cannot obtain PCI resources\n");
- goto fail_resources;
- }
-
- bridge_io = pci_iomap(pdev, 1, 0);
- if (!bridge_io) {
- printk(KERN_ERR PFX "Cannot map bridge registers\n");
- err = -EIO;
- goto fail_map_bridge;
- }
-
- hermes_io = pci_iomap(pdev, 2, 0);
- if (!hermes_io) {
- printk(KERN_ERR PFX "Cannot map chipset registers\n");
- err = -EIO;
- goto fail_map_hermes;
- }
-
- /* Allocate network device */
- priv = alloc_orinocodev(sizeof(*card), &pdev->dev,
- orinoco_tmd_cor_reset, NULL);
- if (!priv) {
- printk(KERN_ERR PFX "Cannot allocate network device\n");
- err = -ENOMEM;
- goto fail_alloc;
- }
-
- card = priv->card;
- card->bridge_io = bridge_io;
-
- hermes_struct_init(&priv->hw, hermes_io, HERMES_16BIT_REGSPACING);
-
- err = request_irq(pdev->irq, orinoco_interrupt, IRQF_SHARED,
- DRIVER_NAME, priv);
- if (err) {
- printk(KERN_ERR PFX "Cannot allocate IRQ %d\n", pdev->irq);
- err = -EBUSY;
- goto fail_irq;
- }
-
- err = orinoco_tmd_cor_reset(priv);
- if (err) {
- printk(KERN_ERR PFX "Initial reset failed\n");
- goto fail;
- }
-
- err = orinoco_init(priv);
- if (err) {
- printk(KERN_ERR PFX "orinoco_init() failed\n");
- goto fail;
- }
-
- err = orinoco_if_add(priv, 0, 0, NULL);
- if (err) {
- printk(KERN_ERR PFX "orinoco_if_add() failed\n");
- goto fail;
- }
-
- pci_set_drvdata(pdev, priv);
-
- return 0;
-
- fail:
- free_irq(pdev->irq, priv);
-
- fail_irq:
- free_orinocodev(priv);
-
- fail_alloc:
- pci_iounmap(pdev, hermes_io);
-
- fail_map_hermes:
- pci_iounmap(pdev, bridge_io);
-
- fail_map_bridge:
- pci_release_regions(pdev);
-
- fail_resources:
- pci_disable_device(pdev);
-
- return err;
-}
-
-static void orinoco_tmd_remove_one(struct pci_dev *pdev)
-{
- struct orinoco_private *priv = pci_get_drvdata(pdev);
- struct orinoco_pci_card *card = priv->card;
-
- orinoco_if_del(priv);
- free_irq(pdev->irq, priv);
- free_orinocodev(priv);
- pci_iounmap(pdev, priv->hw.iobase);
- pci_iounmap(pdev, card->bridge_io);
- pci_release_regions(pdev);
- pci_disable_device(pdev);
-}
-
-static const struct pci_device_id orinoco_tmd_id_table[] = {
- {0x15e8, 0x0131, PCI_ANY_ID, PCI_ANY_ID,}, /* NDC and OEMs, e.g. pheecom */
- {0,},
-};
-
-MODULE_DEVICE_TABLE(pci, orinoco_tmd_id_table);
-
-static struct pci_driver orinoco_tmd_driver = {
- .name = DRIVER_NAME,
- .id_table = orinoco_tmd_id_table,
- .probe = orinoco_tmd_init_one,
- .remove = orinoco_tmd_remove_one,
- .driver.pm = &orinoco_pci_pm_ops,
-};
-
-static char version[] __initdata = DRIVER_NAME " " DRIVER_VERSION
- " (Joerg Dorchain <joerg@dorchain.net>)";
-MODULE_AUTHOR("Joerg Dorchain <joerg@dorchain.net>");
-MODULE_DESCRIPTION("Driver for wireless LAN cards using the TMD7160 PCI bridge");
-MODULE_LICENSE("Dual MPL/GPL");
-
-static int __init orinoco_tmd_init(void)
-{
- printk(KERN_DEBUG "%s\n", version);
- return pci_register_driver(&orinoco_tmd_driver);
-}
-
-static void __exit orinoco_tmd_exit(void)
-{
- pci_unregister_driver(&orinoco_tmd_driver);
-}
-
-module_init(orinoco_tmd_init);
-module_exit(orinoco_tmd_exit);
generated by cgit v1.2.3 (git 2.39.0) at 2024-12-04 07:28:36 +0300