diff options
Diffstat (limited to 'drivers/net/wireless/intel/iwlegacy/4965-rs.c')
| -rw-r--r-- | drivers/net/wireless/intel/iwlegacy/4965-rs.c | 2835 |
1 files changed, 2835 insertions, 0 deletions
diff --git a/drivers/net/wireless/intel/iwlegacy/4965-rs.c b/drivers/net/wireless/intel/iwlegacy/4965-rs.c new file mode 100644 index 000000000000..bac60b2bc3f0 --- /dev/null +++ b/drivers/net/wireless/intel/iwlegacy/4965-rs.c @@ -0,0 +1,2835 @@ +/****************************************************************************** + * + * Copyright(c) 2005 - 2011 Intel Corporation. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of version 2 of the GNU General Public License as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + * You should have received a copy of the GNU General Public License along with + * this program; if not, write to the Free Software Foundation, Inc., + * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA + * + * The full GNU General Public License is included in this distribution in the + * file called LICENSE. + * + * Contact Information: + * Intel Linux Wireless <ilw@linux.intel.com> + * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497 + * + *****************************************************************************/ +#include <linux/kernel.h> +#include <linux/skbuff.h> +#include <linux/slab.h> +#include <net/mac80211.h> + +#include <linux/netdevice.h> +#include <linux/etherdevice.h> +#include <linux/delay.h> + +#include <linux/workqueue.h> + +#include "common.h" +#include "4965.h" + +#define IL4965_RS_NAME "iwl-4965-rs" + +#define NUM_TRY_BEFORE_ANT_TOGGLE 1 +#define IL_NUMBER_TRY 1 +#define IL_HT_NUMBER_TRY 3 + +#define RATE_MAX_WINDOW 62 /* # tx in history win */ +#define RATE_MIN_FAILURE_TH 6 /* min failures to calc tpt */ +#define RATE_MIN_SUCCESS_TH 8 /* min successes to calc tpt */ + +/* max allowed rate miss before sync LQ cmd */ +#define IL_MISSED_RATE_MAX 15 +/* max time to accum history 2 seconds */ +#define RATE_SCALE_FLUSH_INTVL (3*HZ) + +static u8 rs_ht_to_legacy[] = { + RATE_6M_IDX, RATE_6M_IDX, + RATE_6M_IDX, RATE_6M_IDX, + RATE_6M_IDX, + RATE_6M_IDX, RATE_9M_IDX, + RATE_12M_IDX, RATE_18M_IDX, + RATE_24M_IDX, RATE_36M_IDX, + RATE_48M_IDX, RATE_54M_IDX +}; + +static const u8 ant_toggle_lookup[] = { + /*ANT_NONE -> */ ANT_NONE, + /*ANT_A -> */ ANT_B, + /*ANT_B -> */ ANT_C, + /*ANT_AB -> */ ANT_BC, + /*ANT_C -> */ ANT_A, + /*ANT_AC -> */ ANT_AB, + /*ANT_BC -> */ ANT_AC, + /*ANT_ABC -> */ ANT_ABC, +}; + +#define IL_DECLARE_RATE_INFO(r, s, ip, in, rp, rn, pp, np) \ + [RATE_##r##M_IDX] = { RATE_##r##M_PLCP, \ + RATE_SISO_##s##M_PLCP, \ + RATE_MIMO2_##s##M_PLCP,\ + RATE_##r##M_IEEE, \ + RATE_##ip##M_IDX, \ + RATE_##in##M_IDX, \ + RATE_##rp##M_IDX, \ + RATE_##rn##M_IDX, \ + RATE_##pp##M_IDX, \ + RATE_##np##M_IDX } + +/* + * Parameter order: + * rate, ht rate, prev rate, next rate, prev tgg rate, next tgg rate + * + * If there isn't a valid next or previous rate then INV is used which + * maps to RATE_INVALID + * + */ +const struct il_rate_info il_rates[RATE_COUNT] = { + IL_DECLARE_RATE_INFO(1, INV, INV, 2, INV, 2, INV, 2), /* 1mbps */ + IL_DECLARE_RATE_INFO(2, INV, 1, 5, 1, 5, 1, 5), /* 2mbps */ + IL_DECLARE_RATE_INFO(5, INV, 2, 6, 2, 11, 2, 11), /*5.5mbps */ + IL_DECLARE_RATE_INFO(11, INV, 9, 12, 9, 12, 5, 18), /* 11mbps */ + IL_DECLARE_RATE_INFO(6, 6, 5, 9, 5, 11, 5, 11), /* 6mbps */ + IL_DECLARE_RATE_INFO(9, 6, 6, 11, 6, 11, 5, 11), /* 9mbps */ + IL_DECLARE_RATE_INFO(12, 12, 11, 18, 11, 18, 11, 18), /* 12mbps */ + IL_DECLARE_RATE_INFO(18, 18, 12, 24, 12, 24, 11, 24), /* 18mbps */ + IL_DECLARE_RATE_INFO(24, 24, 18, 36, 18, 36, 18, 36), /* 24mbps */ + IL_DECLARE_RATE_INFO(36, 36, 24, 48, 24, 48, 24, 48), /* 36mbps */ + IL_DECLARE_RATE_INFO(48, 48, 36, 54, 36, 54, 36, 54), /* 48mbps */ + IL_DECLARE_RATE_INFO(54, 54, 48, INV, 48, INV, 48, INV),/* 54mbps */ + IL_DECLARE_RATE_INFO(60, 60, 48, INV, 48, INV, 48, INV),/* 60mbps */ +}; + +static int +il4965_hwrate_to_plcp_idx(u32 rate_n_flags) +{ + int idx = 0; + + /* HT rate format */ + if (rate_n_flags & RATE_MCS_HT_MSK) { + idx = (rate_n_flags & 0xff); + + if (idx >= RATE_MIMO2_6M_PLCP) + idx = idx - RATE_MIMO2_6M_PLCP; + + idx += IL_FIRST_OFDM_RATE; + /* skip 9M not supported in ht */ + if (idx >= RATE_9M_IDX) + idx += 1; + if (idx >= IL_FIRST_OFDM_RATE && idx <= IL_LAST_OFDM_RATE) + return idx; + + /* legacy rate format, search for match in table */ + } else { + for (idx = 0; idx < ARRAY_SIZE(il_rates); idx++) + if (il_rates[idx].plcp == (rate_n_flags & 0xFF)) + return idx; + } + + return -1; +} + +static void il4965_rs_rate_scale_perform(struct il_priv *il, + struct sk_buff *skb, + struct ieee80211_sta *sta, + struct il_lq_sta *lq_sta); +static void il4965_rs_fill_link_cmd(struct il_priv *il, + struct il_lq_sta *lq_sta, u32 rate_n_flags); +static void il4965_rs_stay_in_table(struct il_lq_sta *lq_sta, + bool force_search); + +#ifdef CONFIG_MAC80211_DEBUGFS +static void il4965_rs_dbgfs_set_mcs(struct il_lq_sta *lq_sta, + u32 *rate_n_flags, int idx); +#else +static void +il4965_rs_dbgfs_set_mcs(struct il_lq_sta *lq_sta, u32 * rate_n_flags, int idx) +{ +} +#endif + +/** + * The following tables contain the expected throughput metrics for all rates + * + * 1, 2, 5.5, 11, 6, 9, 12, 18, 24, 36, 48, 54, 60 MBits + * + * where invalid entries are zeros. + * + * CCK rates are only valid in legacy table and will only be used in G + * (2.4 GHz) band. + */ + +static s32 expected_tpt_legacy[RATE_COUNT] = { + 7, 13, 35, 58, 40, 57, 72, 98, 121, 154, 177, 186, 0 +}; + +static s32 expected_tpt_siso20MHz[4][RATE_COUNT] = { + {0, 0, 0, 0, 42, 0, 76, 102, 124, 158, 183, 193, 202}, /* Norm */ + {0, 0, 0, 0, 46, 0, 82, 110, 132, 167, 192, 202, 210}, /* SGI */ + {0, 0, 0, 0, 48, 0, 93, 135, 176, 251, 319, 351, 381}, /* AGG */ + {0, 0, 0, 0, 53, 0, 102, 149, 193, 275, 348, 381, 413}, /* AGG+SGI */ +}; + +static s32 expected_tpt_siso40MHz[4][RATE_COUNT] = { + {0, 0, 0, 0, 77, 0, 127, 160, 184, 220, 242, 250, 257}, /* Norm */ + {0, 0, 0, 0, 83, 0, 135, 169, 193, 229, 250, 257, 264}, /* SGI */ + {0, 0, 0, 0, 96, 0, 182, 259, 328, 451, 553, 598, 640}, /* AGG */ + {0, 0, 0, 0, 106, 0, 199, 282, 357, 487, 593, 640, 683}, /* AGG+SGI */ +}; + +static s32 expected_tpt_mimo2_20MHz[4][RATE_COUNT] = { + {0, 0, 0, 0, 74, 0, 123, 155, 179, 213, 235, 243, 250}, /* Norm */ + {0, 0, 0, 0, 81, 0, 131, 164, 187, 221, 242, 250, 256}, /* SGI */ + {0, 0, 0, 0, 92, 0, 175, 250, 317, 436, 534, 578, 619}, /* AGG */ + {0, 0, 0, 0, 102, 0, 192, 273, 344, 470, 573, 619, 660}, /* AGG+SGI */ +}; + +static s32 expected_tpt_mimo2_40MHz[4][RATE_COUNT] = { + {0, 0, 0, 0, 123, 0, 182, 214, 235, 264, 279, 285, 289}, /* Norm */ + {0, 0, 0, 0, 131, 0, 191, 222, 242, 270, 284, 289, 293}, /* SGI */ + {0, 0, 0, 0, 180, 0, 327, 446, 545, 708, 828, 878, 922}, /* AGG */ + {0, 0, 0, 0, 197, 0, 355, 481, 584, 752, 872, 922, 966}, /* AGG+SGI */ +}; + +/* mbps, mcs */ +static const struct il_rate_mcs_info il_rate_mcs[RATE_COUNT] = { + {"1", "BPSK DSSS"}, + {"2", "QPSK DSSS"}, + {"5.5", "BPSK CCK"}, + {"11", "QPSK CCK"}, + {"6", "BPSK 1/2"}, + {"9", "BPSK 1/2"}, + {"12", "QPSK 1/2"}, + {"18", "QPSK 3/4"}, + {"24", "16QAM 1/2"}, + {"36", "16QAM 3/4"}, + {"48", "64QAM 2/3"}, + {"54", "64QAM 3/4"}, + {"60", "64QAM 5/6"}, +}; + +#define MCS_IDX_PER_STREAM (8) + +static inline u8 +il4965_rs_extract_rate(u32 rate_n_flags) +{ + return (u8) (rate_n_flags & 0xFF); +} + +static void +il4965_rs_rate_scale_clear_win(struct il_rate_scale_data *win) +{ + win->data = 0; + win->success_counter = 0; + win->success_ratio = IL_INVALID_VALUE; + win->counter = 0; + win->average_tpt = IL_INVALID_VALUE; + win->stamp = 0; +} + +static inline u8 +il4965_rs_is_valid_ant(u8 valid_antenna, u8 ant_type) +{ + return (ant_type & valid_antenna) == ant_type; +} + +/* + * removes the old data from the stats. All data that is older than + * TID_MAX_TIME_DIFF, will be deleted. + */ +static void +il4965_rs_tl_rm_old_stats(struct il_traffic_load *tl, u32 curr_time) +{ + /* The oldest age we want to keep */ + u32 oldest_time = curr_time - TID_MAX_TIME_DIFF; + + while (tl->queue_count && tl->time_stamp < oldest_time) { + tl->total -= tl->packet_count[tl->head]; + tl->packet_count[tl->head] = 0; + tl->time_stamp += TID_QUEUE_CELL_SPACING; + tl->queue_count--; + tl->head++; + if (tl->head >= TID_QUEUE_MAX_SIZE) + tl->head = 0; + } +} + +/* + * increment traffic load value for tid and also remove + * any old values if passed the certain time period + */ +static u8 +il4965_rs_tl_add_packet(struct il_lq_sta *lq_data, struct ieee80211_hdr *hdr) +{ + u32 curr_time = jiffies_to_msecs(jiffies); + u32 time_diff; + s32 idx; + struct il_traffic_load *tl = NULL; + u8 tid; + + if (ieee80211_is_data_qos(hdr->frame_control)) { + u8 *qc = ieee80211_get_qos_ctl(hdr); + tid = qc[0] & 0xf; + } else + return MAX_TID_COUNT; + + if (unlikely(tid >= TID_MAX_LOAD_COUNT)) + return MAX_TID_COUNT; + + tl = &lq_data->load[tid]; + + curr_time -= curr_time % TID_ROUND_VALUE; + + /* Happens only for the first packet. Initialize the data */ + if (!(tl->queue_count)) { + tl->total = 1; + tl->time_stamp = curr_time; + tl->queue_count = 1; + tl->head = 0; + tl->packet_count[0] = 1; + return MAX_TID_COUNT; + } + + time_diff = TIME_WRAP_AROUND(tl->time_stamp, curr_time); + idx = time_diff / TID_QUEUE_CELL_SPACING; + + /* The history is too long: remove data that is older than */ + /* TID_MAX_TIME_DIFF */ + if (idx >= TID_QUEUE_MAX_SIZE) + il4965_rs_tl_rm_old_stats(tl, curr_time); + + idx = (tl->head + idx) % TID_QUEUE_MAX_SIZE; + tl->packet_count[idx] = tl->packet_count[idx] + 1; + tl->total = tl->total + 1; + + if ((idx + 1) > tl->queue_count) + tl->queue_count = idx + 1; + + return tid; +} + +/* + get the traffic load value for tid +*/ +static u32 +il4965_rs_tl_get_load(struct il_lq_sta *lq_data, u8 tid) +{ + u32 curr_time = jiffies_to_msecs(jiffies); + u32 time_diff; + s32 idx; + struct il_traffic_load *tl = NULL; + + if (tid >= TID_MAX_LOAD_COUNT) + return 0; + + tl = &(lq_data->load[tid]); + + curr_time -= curr_time % TID_ROUND_VALUE; + + if (!(tl->queue_count)) + return 0; + + time_diff = TIME_WRAP_AROUND(tl->time_stamp, curr_time); + idx = time_diff / TID_QUEUE_CELL_SPACING; + + /* The history is too long: remove data that is older than */ + /* TID_MAX_TIME_DIFF */ + if (idx >= TID_QUEUE_MAX_SIZE) + il4965_rs_tl_rm_old_stats(tl, curr_time); + + return tl->total; +} + +static int +il4965_rs_tl_turn_on_agg_for_tid(struct il_priv *il, struct il_lq_sta *lq_data, + u8 tid, struct ieee80211_sta *sta) +{ + int ret = -EAGAIN; + u32 load; + + load = il4965_rs_tl_get_load(lq_data, tid); + + if (load > IL_AGG_LOAD_THRESHOLD) { + D_HT("Starting Tx agg: STA: %pM tid: %d\n", sta->addr, tid); + ret = ieee80211_start_tx_ba_session(sta, tid, 5000); + if (ret == -EAGAIN) { + /* + * driver and mac80211 is out of sync + * this might be cause by reloading firmware + * stop the tx ba session here + */ + IL_ERR("Fail start Tx agg on tid: %d\n", tid); + ieee80211_stop_tx_ba_session(sta, tid); + } + } else + D_HT("Aggregation not enabled for tid %d because load = %u\n", + tid, load); + + return ret; +} + +static void +il4965_rs_tl_turn_on_agg(struct il_priv *il, u8 tid, struct il_lq_sta *lq_data, + struct ieee80211_sta *sta) +{ + if (tid < TID_MAX_LOAD_COUNT) + il4965_rs_tl_turn_on_agg_for_tid(il, lq_data, tid, sta); + else + IL_ERR("tid exceeds max load count: %d/%d\n", tid, + TID_MAX_LOAD_COUNT); +} + +static inline int +il4965_get_il4965_num_of_ant_from_rate(u32 rate_n_flags) +{ + return !!(rate_n_flags & RATE_MCS_ANT_A_MSK) + + !!(rate_n_flags & RATE_MCS_ANT_B_MSK) + + !!(rate_n_flags & RATE_MCS_ANT_C_MSK); +} + +/* + * Static function to get the expected throughput from an il_scale_tbl_info + * that wraps a NULL pointer check + */ +static s32 +il4965_get_expected_tpt(struct il_scale_tbl_info *tbl, int rs_idx) +{ + if (tbl->expected_tpt) + return tbl->expected_tpt[rs_idx]; + return 0; +} + +/** + * il4965_rs_collect_tx_data - Update the success/failure sliding win + * + * We keep a sliding win of the last 62 packets transmitted + * at this rate. win->data contains the bitmask of successful + * packets. + */ +static int +il4965_rs_collect_tx_data(struct il_scale_tbl_info *tbl, int scale_idx, + int attempts, int successes) +{ + struct il_rate_scale_data *win = NULL; + static const u64 mask = (((u64) 1) << (RATE_MAX_WINDOW - 1)); + s32 fail_count, tpt; + + if (scale_idx < 0 || scale_idx >= RATE_COUNT) + return -EINVAL; + + /* Select win for current tx bit rate */ + win = &(tbl->win[scale_idx]); + + /* Get expected throughput */ + tpt = il4965_get_expected_tpt(tbl, scale_idx); + + /* + * Keep track of only the latest 62 tx frame attempts in this rate's + * history win; anything older isn't really relevant any more. + * If we have filled up the sliding win, drop the oldest attempt; + * if the oldest attempt (highest bit in bitmap) shows "success", + * subtract "1" from the success counter (this is the main reason + * we keep these bitmaps!). + */ + while (attempts > 0) { + if (win->counter >= RATE_MAX_WINDOW) { + + /* remove earliest */ + win->counter = RATE_MAX_WINDOW - 1; + + if (win->data & mask) { + win->data &= ~mask; + win->success_counter--; + } + } + + /* Increment frames-attempted counter */ + win->counter++; + + /* Shift bitmap by one frame to throw away oldest history */ + win->data <<= 1; + + /* Mark the most recent #successes attempts as successful */ + if (successes > 0) { + win->success_counter++; + win->data |= 0x1; + successes--; + } + + attempts--; + } + + /* Calculate current success ratio, avoid divide-by-0! */ + if (win->counter > 0) + win->success_ratio = + 128 * (100 * win->success_counter) / win->counter; + else + win->success_ratio = IL_INVALID_VALUE; + + fail_count = win->counter - win->success_counter; + + /* Calculate average throughput, if we have enough history. */ + if (fail_count >= RATE_MIN_FAILURE_TH || + win->success_counter >= RATE_MIN_SUCCESS_TH) + win->average_tpt = (win->success_ratio * tpt + 64) / 128; + else + win->average_tpt = IL_INVALID_VALUE; + + /* Tag this win as having been updated */ + win->stamp = jiffies; + + return 0; +} + +/* + * Fill uCode API rate_n_flags field, based on "search" or "active" table. + */ +static u32 +il4965_rate_n_flags_from_tbl(struct il_priv *il, struct il_scale_tbl_info *tbl, + int idx, u8 use_green) +{ + u32 rate_n_flags = 0; + + if (is_legacy(tbl->lq_type)) { + rate_n_flags = il_rates[idx].plcp; + if (idx >= IL_FIRST_CCK_RATE && idx <= IL_LAST_CCK_RATE) + rate_n_flags |= RATE_MCS_CCK_MSK; + + } else if (is_Ht(tbl->lq_type)) { + if (idx > IL_LAST_OFDM_RATE) { + IL_ERR("Invalid HT rate idx %d\n", idx); + idx = IL_LAST_OFDM_RATE; + } + rate_n_flags = RATE_MCS_HT_MSK; + + if (is_siso(tbl->lq_type)) + rate_n_flags |= il_rates[idx].plcp_siso; + else + rate_n_flags |= il_rates[idx].plcp_mimo2; + } else { + IL_ERR("Invalid tbl->lq_type %d\n", tbl->lq_type); + } + + rate_n_flags |= + ((tbl->ant_type << RATE_MCS_ANT_POS) & RATE_MCS_ANT_ABC_MSK); + + if (is_Ht(tbl->lq_type)) { + if (tbl->is_ht40) { + if (tbl->is_dup) + rate_n_flags |= RATE_MCS_DUP_MSK; + else + rate_n_flags |= RATE_MCS_HT40_MSK; + } + if (tbl->is_SGI) + rate_n_flags |= RATE_MCS_SGI_MSK; + + if (use_green) { + rate_n_flags |= RATE_MCS_GF_MSK; + if (is_siso(tbl->lq_type) && tbl->is_SGI) { + rate_n_flags &= ~RATE_MCS_SGI_MSK; + IL_ERR("GF was set with SGI:SISO\n"); + } + } + } + return rate_n_flags; +} + +/* + * Interpret uCode API's rate_n_flags format, + * fill "search" or "active" tx mode table. + */ +static int +il4965_rs_get_tbl_info_from_mcs(const u32 rate_n_flags, + enum ieee80211_band band, + struct il_scale_tbl_info *tbl, int *rate_idx) +{ + u32 ant_msk = (rate_n_flags & RATE_MCS_ANT_ABC_MSK); + u8 il4965_num_of_ant = + il4965_get_il4965_num_of_ant_from_rate(rate_n_flags); + u8 mcs; + + memset(tbl, 0, sizeof(struct il_scale_tbl_info)); + *rate_idx = il4965_hwrate_to_plcp_idx(rate_n_flags); + + if (*rate_idx == RATE_INVALID) { + *rate_idx = -1; + return -EINVAL; + } + tbl->is_SGI = 0; /* default legacy setup */ + tbl->is_ht40 = 0; + tbl->is_dup = 0; + tbl->ant_type = (ant_msk >> RATE_MCS_ANT_POS); + tbl->lq_type = LQ_NONE; + tbl->max_search = IL_MAX_SEARCH; + + /* legacy rate format */ + if (!(rate_n_flags & RATE_MCS_HT_MSK)) { + if (il4965_num_of_ant == 1) { + if (band == IEEE80211_BAND_5GHZ) + tbl->lq_type = LQ_A; + else + tbl->lq_type = LQ_G; + } + /* HT rate format */ + } else { + if (rate_n_flags & RATE_MCS_SGI_MSK) + tbl->is_SGI = 1; + + if ((rate_n_flags & RATE_MCS_HT40_MSK) || + (rate_n_flags & RATE_MCS_DUP_MSK)) + tbl->is_ht40 = 1; + + if (rate_n_flags & RATE_MCS_DUP_MSK) + tbl->is_dup = 1; + + mcs = il4965_rs_extract_rate(rate_n_flags); + + /* SISO */ + if (mcs <= RATE_SISO_60M_PLCP) { + if (il4965_num_of_ant == 1) + tbl->lq_type = LQ_SISO; /*else NONE */ + /* MIMO2 */ + } else { + if (il4965_num_of_ant == 2) + tbl->lq_type = LQ_MIMO2; + } + } + return 0; +} + +/* switch to another antenna/antennas and return 1 */ +/* if no other valid antenna found, return 0 */ +static int +il4965_rs_toggle_antenna(u32 valid_ant, u32 *rate_n_flags, + struct il_scale_tbl_info *tbl) +{ + u8 new_ant_type; + + if (!tbl->ant_type || tbl->ant_type > ANT_ABC) + return 0; + + if (!il4965_rs_is_valid_ant(valid_ant, tbl->ant_type)) + return 0; + + new_ant_type = ant_toggle_lookup[tbl->ant_type]; + + while (new_ant_type != tbl->ant_type && + !il4965_rs_is_valid_ant(valid_ant, new_ant_type)) + new_ant_type = ant_toggle_lookup[new_ant_type]; + + if (new_ant_type == tbl->ant_type) + return 0; + + tbl->ant_type = new_ant_type; + *rate_n_flags &= ~RATE_MCS_ANT_ABC_MSK; + *rate_n_flags |= new_ant_type << RATE_MCS_ANT_POS; + return 1; +} + +/** + * Green-field mode is valid if the station supports it and + * there are no non-GF stations present in the BSS. + */ +static bool +il4965_rs_use_green(struct il_priv *il, struct ieee80211_sta *sta) +{ + return (sta->ht_cap.cap & IEEE80211_HT_CAP_GRN_FLD) && + !il->ht.non_gf_sta_present; +} + +/** + * il4965_rs_get_supported_rates - get the available rates + * + * if management frame or broadcast frame only return + * basic available rates. + * + */ +static u16 +il4965_rs_get_supported_rates(struct il_lq_sta *lq_sta, + struct ieee80211_hdr *hdr, + enum il_table_type rate_type) +{ + if (is_legacy(rate_type)) { + return lq_sta->active_legacy_rate; + } else { + if (is_siso(rate_type)) + return lq_sta->active_siso_rate; + else + return lq_sta->active_mimo2_rate; + } +} + +static u16 +il4965_rs_get_adjacent_rate(struct il_priv *il, u8 idx, u16 rate_mask, + int rate_type) +{ + u8 high = RATE_INVALID; + u8 low = RATE_INVALID; + + /* 802.11A or ht walks to the next literal adjacent rate in + * the rate table */ + if (is_a_band(rate_type) || !is_legacy(rate_type)) { + int i; + u32 mask; + + /* Find the previous rate that is in the rate mask */ + i = idx - 1; + for (mask = (1 << i); i >= 0; i--, mask >>= 1) { + if (rate_mask & mask) { + low = i; + break; + } + } + + /* Find the next rate that is in the rate mask */ + i = idx + 1; + for (mask = (1 << i); i < RATE_COUNT; i++, mask <<= 1) { + if (rate_mask & mask) { + high = i; + break; + } + } + + return (high << 8) | low; + } + + low = idx; + while (low != RATE_INVALID) { + low = il_rates[low].prev_rs; + if (low == RATE_INVALID) + break; + if (rate_mask & (1 << low)) + break; + D_RATE("Skipping masked lower rate: %d\n", low); + } + + high = idx; + while (high != RATE_INVALID) { + high = il_rates[high].next_rs; + if (high == RATE_INVALID) + break; + if (rate_mask & (1 << high)) + break; + D_RATE("Skipping masked higher rate: %d\n", high); + } + + return (high << 8) | low; +} + +static u32 +il4965_rs_get_lower_rate(struct il_lq_sta *lq_sta, + struct il_scale_tbl_info *tbl, u8 scale_idx, + u8 ht_possible) +{ + s32 low; + u16 rate_mask; + u16 high_low; + u8 switch_to_legacy = 0; + u8 is_green = lq_sta->is_green; + struct il_priv *il = lq_sta->drv; + + /* check if we need to switch from HT to legacy rates. + * assumption is that mandatory rates (1Mbps or 6Mbps) + * are always supported (spec demand) */ + if (!is_legacy(tbl->lq_type) && (!ht_possible || !scale_idx)) { + switch_to_legacy = 1; + scale_idx = rs_ht_to_legacy[scale_idx]; + if (lq_sta->band == IEEE80211_BAND_5GHZ) + tbl->lq_type = LQ_A; + else + tbl->lq_type = LQ_G; + + if (il4965_num_of_ant(tbl->ant_type) > 1) + tbl->ant_type = + il4965_first_antenna(il->hw_params.valid_tx_ant); + + tbl->is_ht40 = 0; + tbl->is_SGI = 0; + tbl->max_search = IL_MAX_SEARCH; + } + + rate_mask = il4965_rs_get_supported_rates(lq_sta, NULL, tbl->lq_type); + + /* Mask with station rate restriction */ + if (is_legacy(tbl->lq_type)) { + /* supp_rates has no CCK bits in A mode */ + if (lq_sta->band == IEEE80211_BAND_5GHZ) + rate_mask = + (u16) (rate_mask & + (lq_sta->supp_rates << IL_FIRST_OFDM_RATE)); + else + rate_mask = (u16) (rate_mask & lq_sta->supp_rates); + } + + /* If we switched from HT to legacy, check current rate */ + if (switch_to_legacy && (rate_mask & (1 << scale_idx))) { + low = scale_idx; + goto out; + } + + high_low = + il4965_rs_get_adjacent_rate(lq_sta->drv, scale_idx, rate_mask, + tbl->lq_type); + low = high_low & 0xff; + + if (low == RATE_INVALID) + low = scale_idx; + +out: + return il4965_rate_n_flags_from_tbl(lq_sta->drv, tbl, low, is_green); +} + +/* + * Simple function to compare two rate scale table types + */ +static bool +il4965_table_type_matches(struct il_scale_tbl_info *a, + struct il_scale_tbl_info *b) +{ + return (a->lq_type == b->lq_type && a->ant_type == b->ant_type && + a->is_SGI == b->is_SGI); +} + +/* + * mac80211 sends us Tx status + */ +static void +il4965_rs_tx_status(void *il_r, struct ieee80211_supported_band *sband, + struct ieee80211_sta *sta, void *il_sta, + struct sk_buff *skb) +{ + int legacy_success; + int retries; + int rs_idx, mac_idx, i; + struct il_lq_sta *lq_sta = il_sta; + struct il_link_quality_cmd *table; + struct ieee80211_hdr *hdr = (struct ieee80211_hdr *)skb->data; + struct il_priv *il = (struct il_priv *)il_r; + struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb); + enum mac80211_rate_control_flags mac_flags; + u32 tx_rate; + struct il_scale_tbl_info tbl_type; + struct il_scale_tbl_info *curr_tbl, *other_tbl, *tmp_tbl; + + D_RATE("get frame ack response, update rate scale win\n"); + + /* Treat uninitialized rate scaling data same as non-existing. */ + if (!lq_sta) { + D_RATE("Station rate scaling not created yet.\n"); + return; + } else if (!lq_sta->drv) { + D_RATE("Rate scaling not initialized yet.\n"); + return; + } + + if (!ieee80211_is_data(hdr->frame_control) || + (info->flags & IEEE80211_TX_CTL_NO_ACK)) + return; + + /* This packet was aggregated but doesn't carry status info */ + if ((info->flags & IEEE80211_TX_CTL_AMPDU) && + !(info->flags & IEEE80211_TX_STAT_AMPDU)) + return; + + /* + * Ignore this Tx frame response if its initial rate doesn't match + * that of latest Link Quality command. There may be stragglers + * from a previous Link Quality command, but we're no longer interested + * in those; they're either from the "active" mode while we're trying + * to check "search" mode, or a prior "search" mode after we've moved + * to a new "search" mode (which might become the new "active" mode). + */ + table = &lq_sta->lq; + tx_rate = le32_to_cpu(table->rs_table[0].rate_n_flags); + il4965_rs_get_tbl_info_from_mcs(tx_rate, il->band, &tbl_type, &rs_idx); + if (il->band == IEEE80211_BAND_5GHZ) + rs_idx -= IL_FIRST_OFDM_RATE; + mac_flags = info->status.rates[0].flags; + mac_idx = info->status.rates[0].idx; + /* For HT packets, map MCS to PLCP */ + if (mac_flags & IEEE80211_TX_RC_MCS) { + mac_idx &= RATE_MCS_CODE_MSK; /* Remove # of streams */ + if (mac_idx >= (RATE_9M_IDX - IL_FIRST_OFDM_RATE)) + mac_idx++; + /* + * mac80211 HT idx is always zero-idxed; we need to move + * HT OFDM rates after CCK rates in 2.4 GHz band + */ + if (il->band == IEEE80211_BAND_2GHZ) + mac_idx += IL_FIRST_OFDM_RATE; + } + /* Here we actually compare this rate to the latest LQ command */ + if (mac_idx < 0 || + tbl_type.is_SGI != !!(mac_flags & IEEE80211_TX_RC_SHORT_GI) || + tbl_type.is_ht40 != !!(mac_flags & IEEE80211_TX_RC_40_MHZ_WIDTH) || + tbl_type.is_dup != !!(mac_flags & IEEE80211_TX_RC_DUP_DATA) || + tbl_type.ant_type != info->status.antenna || + !!(tx_rate & RATE_MCS_HT_MSK) != !!(mac_flags & IEEE80211_TX_RC_MCS) + || !!(tx_rate & RATE_MCS_GF_MSK) != + !!(mac_flags & IEEE80211_TX_RC_GREEN_FIELD) || rs_idx != mac_idx) { + D_RATE("initial rate %d does not match %d (0x%x)\n", mac_idx, + rs_idx, tx_rate); + /* + * Since rates mis-match, the last LQ command may have failed. + * After IL_MISSED_RATE_MAX mis-matches, resync the uCode with + * ... driver. + */ + lq_sta->missed_rate_counter++; + if (lq_sta->missed_rate_counter > IL_MISSED_RATE_MAX) { + lq_sta->missed_rate_counter = 0; + il_send_lq_cmd(il, &lq_sta->lq, CMD_ASYNC, false); + } + /* Regardless, ignore this status info for outdated rate */ + return; + } else + /* Rate did match, so reset the missed_rate_counter */ + lq_sta->missed_rate_counter = 0; + + /* Figure out if rate scale algorithm is in active or search table */ + if (il4965_table_type_matches + (&tbl_type, &(lq_sta->lq_info[lq_sta->active_tbl]))) { + curr_tbl = &(lq_sta->lq_info[lq_sta->active_tbl]); + other_tbl = &(lq_sta->lq_info[1 - lq_sta->active_tbl]); + } else + if (il4965_table_type_matches + (&tbl_type, &lq_sta->lq_info[1 - lq_sta->active_tbl])) { + curr_tbl = &(lq_sta->lq_info[1 - lq_sta->active_tbl]); + other_tbl = &(lq_sta->lq_info[lq_sta->active_tbl]); + } else { + D_RATE("Neither active nor search matches tx rate\n"); + tmp_tbl = &(lq_sta->lq_info[lq_sta->active_tbl]); + D_RATE("active- lq:%x, ant:%x, SGI:%d\n", tmp_tbl->lq_type, + tmp_tbl->ant_type, tmp_tbl->is_SGI); + tmp_tbl = &(lq_sta->lq_info[1 - lq_sta->active_tbl]); + D_RATE("search- lq:%x, ant:%x, SGI:%d\n", tmp_tbl->lq_type, + tmp_tbl->ant_type, tmp_tbl->is_SGI); + D_RATE("actual- lq:%x, ant:%x, SGI:%d\n", tbl_type.lq_type, + tbl_type.ant_type, tbl_type.is_SGI); + /* + * no matching table found, let's by-pass the data collection + * and continue to perform rate scale to find the rate table + */ + il4965_rs_stay_in_table(lq_sta, true); + goto done; + } + + /* + * Updating the frame history depends on whether packets were + * aggregated. + * + * For aggregation, all packets were transmitted at the same rate, the + * first idx into rate scale table. + */ + if (info->flags & IEEE80211_TX_STAT_AMPDU) { + tx_rate = le32_to_cpu(table->rs_table[0].rate_n_flags); + il4965_rs_get_tbl_info_from_mcs(tx_rate, il->band, &tbl_type, + &rs_idx); + il4965_rs_collect_tx_data(curr_tbl, rs_idx, + info->status.ampdu_len, + info->status.ampdu_ack_len); + + /* Update success/fail counts if not searching for new mode */ + if (lq_sta->stay_in_tbl) { + lq_sta->total_success += info->status.ampdu_ack_len; + lq_sta->total_failed += + (info->status.ampdu_len - + info->status.ampdu_ack_len); + } + } else { + /* + * For legacy, update frame history with for each Tx retry. + */ + retries = info->status.rates[0].count - 1; + /* HW doesn't send more than 15 retries */ + retries = min(retries, 15); + + /* The last transmission may have been successful */ + legacy_success = !!(info->flags & IEEE80211_TX_STAT_ACK); + /* Collect data for each rate used during failed TX attempts */ + for (i = 0; i <= retries; ++i) { + tx_rate = le32_to_cpu(table->rs_table[i].rate_n_flags); + il4965_rs_get_tbl_info_from_mcs(tx_rate, il->band, + &tbl_type, &rs_idx); + /* + * Only collect stats if retried rate is in the same RS + * table as active/search. + */ + if (il4965_table_type_matches(&tbl_type, curr_tbl)) + tmp_tbl = curr_tbl; + else if (il4965_table_type_matches + (&tbl_type, other_tbl)) + tmp_tbl = other_tbl; + else + continue; + il4965_rs_collect_tx_data(tmp_tbl, rs_idx, 1, + i < + retries ? 0 : legacy_success); + } + + /* Update success/fail counts if not searching for new mode */ + if (lq_sta->stay_in_tbl) { + lq_sta->total_success += legacy_success; + lq_sta->total_failed += retries + (1 - legacy_success); + } + } + /* The last TX rate is cached in lq_sta; it's set in if/else above */ + lq_sta->last_rate_n_flags = tx_rate; +done: + /* See if there's a better rate or modulation mode to try. */ + if (sta->supp_rates[sband->band]) + il4965_rs_rate_scale_perform(il, skb, sta, lq_sta); +} + +/* + * Begin a period of staying with a selected modulation mode. + * Set "stay_in_tbl" flag to prevent any mode switches. + * Set frame tx success limits according to legacy vs. high-throughput, + * and reset overall (spanning all rates) tx success history stats. + * These control how long we stay using same modulation mode before + * searching for a new mode. + */ +static void +il4965_rs_set_stay_in_table(struct il_priv *il, u8 is_legacy, + struct il_lq_sta *lq_sta) +{ + D_RATE("we are staying in the same table\n"); + lq_sta->stay_in_tbl = 1; /* only place this gets set */ + if (is_legacy) { + lq_sta->table_count_limit = IL_LEGACY_TBL_COUNT; + lq_sta->max_failure_limit = IL_LEGACY_FAILURE_LIMIT; + lq_sta->max_success_limit = IL_LEGACY_SUCCESS_LIMIT; + } else { + lq_sta->table_count_limit = IL_NONE_LEGACY_TBL_COUNT; + lq_sta->max_failure_limit = IL_NONE_LEGACY_FAILURE_LIMIT; + lq_sta->max_success_limit = IL_NONE_LEGACY_SUCCESS_LIMIT; + } + lq_sta->table_count = 0; + lq_sta->total_failed = 0; + lq_sta->total_success = 0; + lq_sta->flush_timer = jiffies; + lq_sta->action_counter = 0; +} + +/* + * Find correct throughput table for given mode of modulation + */ +static void +il4965_rs_set_expected_tpt_table(struct il_lq_sta *lq_sta, + struct il_scale_tbl_info *tbl) +{ + /* Used to choose among HT tables */ + s32(*ht_tbl_pointer)[RATE_COUNT]; + + /* Check for invalid LQ type */ + if (WARN_ON_ONCE(!is_legacy(tbl->lq_type) && !is_Ht(tbl->lq_type))) { + tbl->expected_tpt = expected_tpt_legacy; + return; + } + + /* Legacy rates have only one table */ + if (is_legacy(tbl->lq_type)) { + tbl->expected_tpt = expected_tpt_legacy; + return; + } + + /* Choose among many HT tables depending on number of streams + * (SISO/MIMO2), channel width (20/40), SGI, and aggregation + * status */ + if (is_siso(tbl->lq_type) && (!tbl->is_ht40 || lq_sta->is_dup)) + ht_tbl_pointer = expected_tpt_siso20MHz; + else if (is_siso(tbl->lq_type)) + ht_tbl_pointer = expected_tpt_siso40MHz; + else if (is_mimo2(tbl->lq_type) && (!tbl->is_ht40 || lq_sta->is_dup)) + ht_tbl_pointer = expected_tpt_mimo2_20MHz; + else /* if (is_mimo2(tbl->lq_type)) <-- must be true */ + ht_tbl_pointer = expected_tpt_mimo2_40MHz; + + if (!tbl->is_SGI && !lq_sta->is_agg) /* Normal */ + tbl->expected_tpt = ht_tbl_pointer[0]; + else if (tbl->is_SGI && !lq_sta->is_agg) /* SGI */ + tbl->expected_tpt = ht_tbl_pointer[1]; + else if (!tbl->is_SGI && lq_sta->is_agg) /* AGG */ + tbl->expected_tpt = ht_tbl_pointer[2]; + else /* AGG+SGI */ + tbl->expected_tpt = ht_tbl_pointer[3]; +} + +/* + * Find starting rate for new "search" high-throughput mode of modulation. + * Goal is to find lowest expected rate (under perfect conditions) that is + * above the current measured throughput of "active" mode, to give new mode + * a fair chance to prove itself without too many challenges. + * + * This gets called when transitioning to more aggressive modulation + * (i.e. legacy to SISO or MIMO, or SISO to MIMO), as well as less aggressive + * (i.e. MIMO to SISO). When moving to MIMO, bit rate will typically need + * to decrease to match "active" throughput. When moving from MIMO to SISO, + * bit rate will typically need to increase, but not if performance was bad. + */ +static s32 +il4965_rs_get_best_rate(struct il_priv *il, struct il_lq_sta *lq_sta, + struct il_scale_tbl_info *tbl, /* "search" */ + u16 rate_mask, s8 idx) +{ + /* "active" values */ + struct il_scale_tbl_info *active_tbl = + &(lq_sta->lq_info[lq_sta->active_tbl]); + s32 active_sr = active_tbl->win[idx].success_ratio; + s32 active_tpt = active_tbl->expected_tpt[idx]; + + /* expected "search" throughput */ + s32 *tpt_tbl = tbl->expected_tpt; + + s32 new_rate, high, low, start_hi; + u16 high_low; + s8 rate = idx; + + new_rate = high = low = start_hi = RATE_INVALID; + + for (;;) { + high_low = + il4965_rs_get_adjacent_rate(il, rate, rate_mask, + tbl->lq_type); + + low = high_low & 0xff; + high = (high_low >> 8) & 0xff; + + /* + * Lower the "search" bit rate, to give new "search" mode + * approximately the same throughput as "active" if: + * + * 1) "Active" mode has been working modestly well (but not + * great), and expected "search" throughput (under perfect + * conditions) at candidate rate is above the actual + * measured "active" throughput (but less than expected + * "active" throughput under perfect conditions). + * OR + * 2) "Active" mode has been working perfectly or very well + * and expected "search" throughput (under perfect + * conditions) at candidate rate is above expected + * "active" throughput (under perfect conditions). + */ + if ((100 * tpt_tbl[rate] > lq_sta->last_tpt && + (active_sr > RATE_DECREASE_TH && active_sr <= RATE_HIGH_TH + && tpt_tbl[rate] <= active_tpt)) || + (active_sr >= RATE_SCALE_SWITCH && + tpt_tbl[rate] > active_tpt)) { + + /* (2nd or later pass) + * If we've already tried to raise the rate, and are + * now trying to lower it, use the higher rate. */ + if (start_hi != RATE_INVALID) { + new_rate = start_hi; + break; + } + + new_rate = rate; + + /* Loop again with lower rate */ + if (low != RATE_INVALID) + rate = low; + + /* Lower rate not available, use the original */ + else + break; + + /* Else try to raise the "search" rate to match "active" */ + } else { + /* (2nd or later pass) + * If we've already tried to lower the rate, and are + * now trying to raise it, use the lower rate. */ + if (new_rate != RATE_INVALID) + break; + + /* Loop again with higher rate */ + else if (high != RATE_INVALID) { + start_hi = high; + rate = high; + + /* Higher rate not available, use the original */ + } else { + new_rate = rate; + break; + } + } + } + + return new_rate; +} + +/* + * Set up search table for MIMO2 + */ +static int +il4965_rs_switch_to_mimo2(struct il_priv *il, struct il_lq_sta *lq_sta, + struct ieee80211_conf *conf, + struct ieee80211_sta *sta, + struct il_scale_tbl_info *tbl, int idx) +{ + u16 rate_mask; + s32 rate; + s8 is_green = lq_sta->is_green; + + if (!conf_is_ht(conf) || !sta->ht_cap.ht_supported) + return -1; + + if (sta->smps_mode == IEEE80211_SMPS_STATIC) + return -1; + + /* Need both Tx chains/antennas to support MIMO */ + if (il->hw_params.tx_chains_num < 2) + return -1; + + D_RATE("LQ: try to switch to MIMO2\n"); + + tbl->lq_type = LQ_MIMO2; + tbl->is_dup = lq_sta->is_dup; + tbl->action = 0; + tbl->max_search = IL_MAX_SEARCH; + rate_mask = lq_sta->active_mimo2_rate; + + if (il_is_ht40_tx_allowed(il, &sta->ht_cap)) + tbl->is_ht40 = 1; + else + tbl->is_ht40 = 0; + + il4965_rs_set_expected_tpt_table(lq_sta, tbl); + + rate = il4965_rs_get_best_rate(il, lq_sta, tbl, rate_mask, idx); + + D_RATE("LQ: MIMO2 best rate %d mask %X\n", rate, rate_mask); + if (rate == RATE_INVALID || !((1 << rate) & rate_mask)) { + D_RATE("Can't switch with idx %d rate mask %x\n", rate, + rate_mask); + return -1; + } + tbl->current_rate = + il4965_rate_n_flags_from_tbl(il, tbl, rate, is_green); + + D_RATE("LQ: Switch to new mcs %X idx is green %X\n", tbl->current_rate, + is_green); + return 0; +} + +/* + * Set up search table for SISO + */ +static int +il4965_rs_switch_to_siso(struct il_priv *il, struct il_lq_sta *lq_sta, + struct ieee80211_conf *conf, struct ieee80211_sta *sta, + struct il_scale_tbl_info *tbl, int idx) +{ + u16 rate_mask; + u8 is_green = lq_sta->is_green; + s32 rate; + + if (!conf_is_ht(conf) || !sta->ht_cap.ht_supported) + return -1; + + D_RATE("LQ: try to switch to SISO\n"); + + tbl->is_dup = lq_sta->is_dup; + tbl->lq_type = LQ_SISO; + tbl->action = 0; + tbl->max_search = IL_MAX_SEARCH; + rate_mask = lq_sta->active_siso_rate; + + if (il_is_ht40_tx_allowed(il, &sta->ht_cap)) + tbl->is_ht40 = 1; + else + tbl->is_ht40 = 0; + + if (is_green) + tbl->is_SGI = 0; /*11n spec: no SGI in SISO+Greenfield */ + + il4965_rs_set_expected_tpt_table(lq_sta, tbl); + rate = il4965_rs_get_best_rate(il, lq_sta, tbl, rate_mask, idx); + + D_RATE("LQ: get best rate %d mask %X\n", rate, rate_mask); + if (rate == RATE_INVALID || !((1 << rate) & rate_mask)) { + D_RATE("can not switch with idx %d rate mask %x\n", rate, + rate_mask); + return -1; + } + tbl->current_rate = + il4965_rate_n_flags_from_tbl(il, tbl, rate, is_green); + D_RATE("LQ: Switch to new mcs %X idx is green %X\n", tbl->current_rate, + is_green); + return 0; +} + +/* + * Try to switch to new modulation mode from legacy + */ +static int +il4965_rs_move_legacy_other(struct il_priv *il, struct il_lq_sta *lq_sta, + struct ieee80211_conf *conf, + struct ieee80211_sta *sta, int idx) +{ + struct il_scale_tbl_info *tbl = &(lq_sta->lq_info[lq_sta->active_tbl]); + struct il_scale_tbl_info *search_tbl = + &(lq_sta->lq_info[(1 - lq_sta->active_tbl)]); + struct il_rate_scale_data *win = &(tbl->win[idx]); + u32 sz = + (sizeof(struct il_scale_tbl_info) - + (sizeof(struct il_rate_scale_data) * RATE_COUNT)); + u8 start_action; + u8 valid_tx_ant = il->hw_params.valid_tx_ant; + u8 tx_chains_num = il->hw_params.tx_chains_num; + int ret = 0; + u8 update_search_tbl_counter = 0; + + tbl->action = IL_LEGACY_SWITCH_SISO; + + start_action = tbl->action; + for (;;) { + lq_sta->action_counter++; + switch (tbl->action) { + case IL_LEGACY_SWITCH_ANTENNA1: + case IL_LEGACY_SWITCH_ANTENNA2: + D_RATE("LQ: Legacy toggle Antenna\n"); + + if ((tbl->action == IL_LEGACY_SWITCH_ANTENNA1 && + tx_chains_num <= 1) || + (tbl->action == IL_LEGACY_SWITCH_ANTENNA2 && + tx_chains_num <= 2)) + break; + + /* Don't change antenna if success has been great */ + if (win->success_ratio >= IL_RS_GOOD_RATIO) + break; + + /* Set up search table to try other antenna */ + memcpy(search_tbl, tbl, sz); + + if (il4965_rs_toggle_antenna + (valid_tx_ant, &search_tbl->current_rate, + search_tbl)) { + update_search_tbl_counter = 1; + il4965_rs_set_expected_tpt_table(lq_sta, + search_tbl); + goto out; + } + break; + case IL_LEGACY_SWITCH_SISO: + D_RATE("LQ: Legacy switch to SISO\n"); + + /* Set up search table to try SISO */ + memcpy(search_tbl, tbl, sz); + search_tbl->is_SGI = 0; + ret = + il4965_rs_switch_to_siso(il, lq_sta, conf, sta, + search_tbl, idx); + if (!ret) { + lq_sta->action_counter = 0; + goto out; + } + + break; + case IL_LEGACY_SWITCH_MIMO2_AB: + case IL_LEGACY_SWITCH_MIMO2_AC: + case IL_LEGACY_SWITCH_MIMO2_BC: + D_RATE("LQ: Legacy switch to MIMO2\n"); + + /* Set up search table to try MIMO */ + memcpy(search_tbl, tbl, sz); + search_tbl->is_SGI = 0; + + if (tbl->action == IL_LEGACY_SWITCH_MIMO2_AB) + search_tbl->ant_type = ANT_AB; + else if (tbl->action == IL_LEGACY_SWITCH_MIMO2_AC) + search_tbl->ant_type = ANT_AC; + else + search_tbl->ant_type = ANT_BC; + + if (!il4965_rs_is_valid_ant + (valid_tx_ant, search_tbl->ant_type)) + break; + + ret = + il4965_rs_switch_to_mimo2(il, lq_sta, conf, sta, + search_tbl, idx); + if (!ret) { + lq_sta->action_counter = 0; + goto out; + } + break; + } + tbl->action++; + if (tbl->action > IL_LEGACY_SWITCH_MIMO2_BC) + tbl->action = IL_LEGACY_SWITCH_ANTENNA1; + + if (tbl->action == start_action) + break; + + } + search_tbl->lq_type = LQ_NONE; + return 0; + +out: + lq_sta->search_better_tbl = 1; + tbl->action++; + if (tbl->action > IL_LEGACY_SWITCH_MIMO2_BC) + tbl->action = IL_LEGACY_SWITCH_ANTENNA1; + if (update_search_tbl_counter) + search_tbl->action = tbl->action; + return 0; + +} + +/* + * Try to switch to new modulation mode from SISO + */ +static int +il4965_rs_move_siso_to_other(struct il_priv *il, struct il_lq_sta *lq_sta, + struct ieee80211_conf *conf, + struct ieee80211_sta *sta, int idx) +{ + u8 is_green = lq_sta->is_green; + struct il_scale_tbl_info *tbl = &(lq_sta->lq_info[lq_sta->active_tbl]); + struct il_scale_tbl_info *search_tbl = + &(lq_sta->lq_info[(1 - lq_sta->active_tbl)]); + struct il_rate_scale_data *win = &(tbl->win[idx]); + struct ieee80211_sta_ht_cap *ht_cap = &sta->ht_cap; + u32 sz = + (sizeof(struct il_scale_tbl_info) - + (sizeof(struct il_rate_scale_data) * RATE_COUNT)); + u8 start_action; + u8 valid_tx_ant = il->hw_params.valid_tx_ant; + u8 tx_chains_num = il->hw_params.tx_chains_num; + u8 update_search_tbl_counter = 0; + int ret; + + start_action = tbl->action; + + for (;;) { + lq_sta->action_counter++; + switch (tbl->action) { + case IL_SISO_SWITCH_ANTENNA1: + case IL_SISO_SWITCH_ANTENNA2: + D_RATE("LQ: SISO toggle Antenna\n"); + if ((tbl->action == IL_SISO_SWITCH_ANTENNA1 && + tx_chains_num <= 1) || + (tbl->action == IL_SISO_SWITCH_ANTENNA2 && + tx_chains_num <= 2)) + break; + + if (win->success_ratio >= IL_RS_GOOD_RATIO) + break; + + memcpy(search_tbl, tbl, sz); + if (il4965_rs_toggle_antenna + (valid_tx_ant, &search_tbl->current_rate, + search_tbl)) { + update_search_tbl_counter = 1; + goto out; + } + break; + case IL_SISO_SWITCH_MIMO2_AB: + case IL_SISO_SWITCH_MIMO2_AC: + case IL_SISO_SWITCH_MIMO2_BC: + D_RATE("LQ: SISO switch to MIMO2\n"); + memcpy(search_tbl, tbl, sz); + search_tbl->is_SGI = 0; + + if (tbl->action == IL_SISO_SWITCH_MIMO2_AB) + search_tbl->ant_type = ANT_AB; + else if (tbl->action == IL_SISO_SWITCH_MIMO2_AC) + search_tbl->ant_type = ANT_AC; + else + search_tbl->ant_type = ANT_BC; + + if (!il4965_rs_is_valid_ant + (valid_tx_ant, search_tbl->ant_type)) + break; + + ret = + il4965_rs_switch_to_mimo2(il, lq_sta, conf, sta, + search_tbl, idx); + if (!ret) + goto out; + break; + case IL_SISO_SWITCH_GI: + if (!tbl->is_ht40 && + !(ht_cap->cap & IEEE80211_HT_CAP_SGI_20)) + break; + if (tbl->is_ht40 && + !(ht_cap->cap & IEEE80211_HT_CAP_SGI_40)) + break; + + D_RATE("LQ: SISO toggle SGI/NGI\n"); + + memcpy(search_tbl, tbl, sz); + if (is_green) { + if (!tbl->is_SGI) + break; + else + IL_ERR("SGI was set in GF+SISO\n"); + } + search_tbl->is_SGI = !tbl->is_SGI; + il4965_rs_set_expected_tpt_table(lq_sta, search_tbl); + if (tbl->is_SGI) { + s32 tpt = lq_sta->last_tpt / 100; + if (tpt >= search_tbl->expected_tpt[idx]) + break; + } + search_tbl->current_rate = + il4965_rate_n_flags_from_tbl(il, search_tbl, idx, + is_green); + update_search_tbl_counter = 1; + goto out; + } + tbl->action++; + if (tbl->action > IL_SISO_SWITCH_GI) + tbl->action = IL_SISO_SWITCH_ANTENNA1; + + if (tbl->action == start_action) + break; + } + search_tbl->lq_type = LQ_NONE; + return 0; + +out: + lq_sta->search_better_tbl = 1; + tbl->action++; + if (tbl->action > IL_SISO_SWITCH_GI) + tbl->action = IL_SISO_SWITCH_ANTENNA1; + if (update_search_tbl_counter) + search_tbl->action = tbl->action; + + return 0; +} + +/* + * Try to switch to new modulation mode from MIMO2 + */ +static int +il4965_rs_move_mimo2_to_other(struct il_priv *il, struct il_lq_sta *lq_sta, + struct ieee80211_conf *conf, + struct ieee80211_sta *sta, int idx) +{ + s8 is_green = lq_sta->is_green; + struct il_scale_tbl_info *tbl = &(lq_sta->lq_info[lq_sta->active_tbl]); + struct il_scale_tbl_info *search_tbl = + &(lq_sta->lq_info[(1 - lq_sta->active_tbl)]); + struct il_rate_scale_data *win = &(tbl->win[idx]); + struct ieee80211_sta_ht_cap *ht_cap = &sta->ht_cap; + u32 sz = + (sizeof(struct il_scale_tbl_info) - + (sizeof(struct il_rate_scale_data) * RATE_COUNT)); + u8 start_action; + u8 valid_tx_ant = il->hw_params.valid_tx_ant; + u8 tx_chains_num = il->hw_params.tx_chains_num; + u8 update_search_tbl_counter = 0; + int ret; + + start_action = tbl->action; + for (;;) { + lq_sta->action_counter++; + switch (tbl->action) { + case IL_MIMO2_SWITCH_ANTENNA1: + case IL_MIMO2_SWITCH_ANTENNA2: + D_RATE("LQ: MIMO2 toggle Antennas\n"); + + if (tx_chains_num <= 2) + break; + + if (win->success_ratio >= IL_RS_GOOD_RATIO) + break; + + memcpy(search_tbl, tbl, sz); + if (il4965_rs_toggle_antenna + (valid_tx_ant, &search_tbl->current_rate, + search_tbl)) { + update_search_tbl_counter = 1; + goto out; + } + break; + case IL_MIMO2_SWITCH_SISO_A: + case IL_MIMO2_SWITCH_SISO_B: + case IL_MIMO2_SWITCH_SISO_C: + D_RATE("LQ: MIMO2 switch to SISO\n"); + + /* Set up new search table for SISO */ + memcpy(search_tbl, tbl, sz); + + if (tbl->action == IL_MIMO2_SWITCH_SISO_A) + search_tbl->ant_type = ANT_A; + else if (tbl->action == IL_MIMO2_SWITCH_SISO_B) + search_tbl->ant_type = ANT_B; + else + search_tbl->ant_type = ANT_C; + + if (!il4965_rs_is_valid_ant + (valid_tx_ant, search_tbl->ant_type)) + break; + + ret = + il4965_rs_switch_to_siso(il, lq_sta, conf, sta, + search_tbl, idx); + if (!ret) + goto out; + + break; + + case IL_MIMO2_SWITCH_GI: + if (!tbl->is_ht40 && + !(ht_cap->cap & IEEE80211_HT_CAP_SGI_20)) + break; + if (tbl->is_ht40 && + !(ht_cap->cap & IEEE80211_HT_CAP_SGI_40)) + break; + + D_RATE("LQ: MIMO2 toggle SGI/NGI\n"); + + /* Set up new search table for MIMO2 */ + memcpy(search_tbl, tbl, sz); + search_tbl->is_SGI = !tbl->is_SGI; + il4965_rs_set_expected_tpt_table(lq_sta, search_tbl); + /* + * If active table already uses the fastest possible + * modulation (dual stream with short guard interval), + * and it's working well, there's no need to look + * for a better type of modulation! + */ + if (tbl->is_SGI) { + s32 tpt = lq_sta->last_tpt / 100; + if (tpt >= search_tbl->expected_tpt[idx]) + break; + } + search_tbl->current_rate = + il4965_rate_n_flags_from_tbl(il, search_tbl, idx, + is_green); + update_search_tbl_counter = 1; + goto out; + + } + tbl->action++; + if (tbl->action > IL_MIMO2_SWITCH_GI) + tbl->action = IL_MIMO2_SWITCH_ANTENNA1; + + if (tbl->action == start_action) + break; + } + search_tbl->lq_type = LQ_NONE; + return 0; +out: + lq_sta->search_better_tbl = 1; + tbl->action++; + if (tbl->action > IL_MIMO2_SWITCH_GI) + tbl->action = IL_MIMO2_SWITCH_ANTENNA1; + if (update_search_tbl_counter) + search_tbl->action = tbl->action; + + return 0; + +} + +/* + * Check whether we should continue using same modulation mode, or + * begin search for a new mode, based on: + * 1) # tx successes or failures while using this mode + * 2) # times calling this function + * 3) elapsed time in this mode (not used, for now) + */ +static void +il4965_rs_stay_in_table(struct il_lq_sta *lq_sta, bool force_search) +{ + struct il_scale_tbl_info *tbl; + int i; + int active_tbl; + int flush_interval_passed = 0; + struct il_priv *il; + + il = lq_sta->drv; + active_tbl = lq_sta->active_tbl; + + tbl = &(lq_sta->lq_info[active_tbl]); + + /* If we've been disallowing search, see if we should now allow it */ + if (lq_sta->stay_in_tbl) { + + /* Elapsed time using current modulation mode */ + if (lq_sta->flush_timer) + flush_interval_passed = + time_after(jiffies, + (unsigned long)(lq_sta->flush_timer + + RATE_SCALE_FLUSH_INTVL)); + + /* + * Check if we should allow search for new modulation mode. + * If many frames have failed or succeeded, or we've used + * this same modulation for a long time, allow search, and + * reset history stats that keep track of whether we should + * allow a new search. Also (below) reset all bitmaps and + * stats in active history. + */ + if (force_search || + lq_sta->total_failed > lq_sta->max_failure_limit || + lq_sta->total_success > lq_sta->max_success_limit || + (!lq_sta->search_better_tbl && lq_sta->flush_timer && + flush_interval_passed)) { + D_RATE("LQ: stay is expired %d %d %d\n", + lq_sta->total_failed, lq_sta->total_success, + flush_interval_passed); + + /* Allow search for new mode */ + lq_sta->stay_in_tbl = 0; /* only place reset */ + lq_sta->total_failed = 0; + lq_sta->total_success = 0; + lq_sta->flush_timer = 0; + + /* + * Else if we've used this modulation mode enough repetitions + * (regardless of elapsed time or success/failure), reset + * history bitmaps and rate-specific stats for all rates in + * active table. + */ + } else { + lq_sta->table_count++; + if (lq_sta->table_count >= lq_sta->table_count_limit) { + lq_sta->table_count = 0; + + D_RATE("LQ: stay in table clear win\n"); + for (i = 0; i < RATE_COUNT; i++) + il4965_rs_rate_scale_clear_win(& + (tbl-> + win + [i])); + } + } + + /* If transitioning to allow "search", reset all history + * bitmaps and stats in active table (this will become the new + * "search" table). */ + if (!lq_sta->stay_in_tbl) { + for (i = 0; i < RATE_COUNT; i++) + il4965_rs_rate_scale_clear_win(&(tbl->win[i])); + } + } +} + +/* + * setup rate table in uCode + */ +static void +il4965_rs_update_rate_tbl(struct il_priv *il, struct il_lq_sta *lq_sta, + struct il_scale_tbl_info *tbl, int idx, u8 is_green) +{ + u32 rate; + + /* Update uCode's rate table. */ + rate = il4965_rate_n_flags_from_tbl(il, tbl, idx, is_green); + il4965_rs_fill_link_cmd(il, lq_sta, rate); + il_send_lq_cmd(il, &lq_sta->lq, CMD_ASYNC, false); +} + +/* + * Do rate scaling and search for new modulation mode. + */ +static void +il4965_rs_rate_scale_perform(struct il_priv *il, struct sk_buff *skb, + struct ieee80211_sta *sta, + struct il_lq_sta *lq_sta) +{ + struct ieee80211_hw *hw = il->hw; + struct ieee80211_conf *conf = &hw->conf; + struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb); + struct ieee80211_hdr *hdr = (struct ieee80211_hdr *)skb->data; + int low = RATE_INVALID; + int high = RATE_INVALID; + int idx; + int i; + struct il_rate_scale_data *win = NULL; + int current_tpt = IL_INVALID_VALUE; + int low_tpt = IL_INVALID_VALUE; + int high_tpt = IL_INVALID_VALUE; + u32 fail_count; + s8 scale_action = 0; + u16 rate_mask; + u8 update_lq = 0; + struct il_scale_tbl_info *tbl, *tbl1; + u16 rate_scale_idx_msk = 0; + u8 is_green = 0; + u8 active_tbl = 0; + u8 done_search = 0; + u16 high_low; + s32 sr; + u8 tid = MAX_TID_COUNT; + struct il_tid_data *tid_data; + + D_RATE("rate scale calculate new rate for skb\n"); + + /* Send management frames and NO_ACK data using lowest rate. */ + /* TODO: this could probably be improved.. */ + if (!ieee80211_is_data(hdr->frame_control) || + (info->flags & IEEE80211_TX_CTL_NO_ACK)) + return; + + lq_sta->supp_rates = sta->supp_rates[lq_sta->band]; + + tid = il4965_rs_tl_add_packet(lq_sta, hdr); + if (tid != MAX_TID_COUNT && (lq_sta->tx_agg_tid_en & (1 << tid))) { + tid_data = &il->stations[lq_sta->lq.sta_id].tid[tid]; + if (tid_data->agg.state == IL_AGG_OFF) + lq_sta->is_agg = 0; + else + lq_sta->is_agg = 1; + } else + lq_sta->is_agg = 0; + + /* + * Select rate-scale / modulation-mode table to work with in + * the rest of this function: "search" if searching for better + * modulation mode, or "active" if doing rate scaling within a mode. + */ + if (!lq_sta->search_better_tbl) + active_tbl = lq_sta->active_tbl; + else + active_tbl = 1 - lq_sta->active_tbl; + + tbl = &(lq_sta->lq_info[active_tbl]); + if (is_legacy(tbl->lq_type)) + lq_sta->is_green = 0; + else + lq_sta->is_green = il4965_rs_use_green(il, sta); + is_green = lq_sta->is_green; + + /* current tx rate */ + idx = lq_sta->last_txrate_idx; + + D_RATE("Rate scale idx %d for type %d\n", idx, tbl->lq_type); + + /* rates available for this association, and for modulation mode */ + rate_mask = il4965_rs_get_supported_rates(lq_sta, hdr, tbl->lq_type); + + D_RATE("mask 0x%04X\n", rate_mask); + + /* mask with station rate restriction */ + if (is_legacy(tbl->lq_type)) { + if (lq_sta->band == IEEE80211_BAND_5GHZ) + /* supp_rates has no CCK bits in A mode */ + rate_scale_idx_msk = + (u16) (rate_mask & + (lq_sta->supp_rates << IL_FIRST_OFDM_RATE)); + else + rate_scale_idx_msk = + (u16) (rate_mask & lq_sta->supp_rates); + + } else + rate_scale_idx_msk = rate_mask; + + if (!rate_scale_idx_msk) + rate_scale_idx_msk = rate_mask; + + if (!((1 << idx) & rate_scale_idx_msk)) { + IL_ERR("Current Rate is not valid\n"); + if (lq_sta->search_better_tbl) { + /* revert to active table if search table is not valid */ + tbl->lq_type = LQ_NONE; + lq_sta->search_better_tbl = 0; + tbl = &(lq_sta->lq_info[lq_sta->active_tbl]); + /* get "active" rate info */ + idx = il4965_hwrate_to_plcp_idx(tbl->current_rate); + il4965_rs_update_rate_tbl(il, lq_sta, tbl, idx, + is_green); + } + return; + } + + /* Get expected throughput table and history win for current rate */ + if (!tbl->expected_tpt) { + IL_ERR("tbl->expected_tpt is NULL\n"); + return; + } + + /* force user max rate if set by user */ + if (lq_sta->max_rate_idx != -1 && lq_sta->max_rate_idx < idx) { + idx = lq_sta->max_rate_idx; + update_lq = 1; + win = &(tbl->win[idx]); + goto lq_update; + } + + win = &(tbl->win[idx]); + + /* + * If there is not enough history to calculate actual average + * throughput, keep analyzing results of more tx frames, without + * changing rate or mode (bypass most of the rest of this function). + * Set up new rate table in uCode only if old rate is not supported + * in current association (use new rate found above). + */ + fail_count = win->counter - win->success_counter; + if (fail_count < RATE_MIN_FAILURE_TH && + win->success_counter < RATE_MIN_SUCCESS_TH) { + D_RATE("LQ: still below TH. succ=%d total=%d " "for idx %d\n", + win->success_counter, win->counter, idx); + + /* Can't calculate this yet; not enough history */ + win->average_tpt = IL_INVALID_VALUE; + + /* Should we stay with this modulation mode, + * or search for a new one? */ + il4965_rs_stay_in_table(lq_sta, false); + + goto out; + } + /* Else we have enough samples; calculate estimate of + * actual average throughput */ + if (win->average_tpt != + ((win->success_ratio * tbl->expected_tpt[idx] + 64) / 128)) { + IL_ERR("expected_tpt should have been calculated by now\n"); + win->average_tpt = + ((win->success_ratio * tbl->expected_tpt[idx] + 64) / 128); + } + + /* If we are searching for better modulation mode, check success. */ + if (lq_sta->search_better_tbl) { + /* If good success, continue using the "search" mode; + * no need to send new link quality command, since we're + * continuing to use the setup that we've been trying. */ + if (win->average_tpt > lq_sta->last_tpt) { + + D_RATE("LQ: SWITCHING TO NEW TBL " + "suc=%d cur-tpt=%d old-tpt=%d\n", + win->success_ratio, win->average_tpt, + lq_sta->last_tpt); + + if (!is_legacy(tbl->lq_type)) + lq_sta->enable_counter = 1; + + /* Swap tables; "search" becomes "active" */ + lq_sta->active_tbl = active_tbl; + current_tpt = win->average_tpt; + + /* Else poor success; go back to mode in "active" table */ + } else { + + D_RATE("LQ: GOING BACK TO THE OLD TBL " + "suc=%d cur-tpt=%d old-tpt=%d\n", + win->success_ratio, win->average_tpt, + lq_sta->last_tpt); + + /* Nullify "search" table */ + tbl->lq_type = LQ_NONE; + + /* Revert to "active" table */ + active_tbl = lq_sta->active_tbl; + tbl = &(lq_sta->lq_info[active_tbl]); + + /* Revert to "active" rate and throughput info */ + idx = il4965_hwrate_to_plcp_idx(tbl->current_rate); + current_tpt = lq_sta->last_tpt; + + /* Need to set up a new rate table in uCode */ + update_lq = 1; + } + + /* Either way, we've made a decision; modulation mode + * search is done, allow rate adjustment next time. */ + lq_sta->search_better_tbl = 0; + done_search = 1; /* Don't switch modes below! */ + goto lq_update; + } + + /* (Else) not in search of better modulation mode, try for better + * starting rate, while staying in this mode. */ + high_low = + il4965_rs_get_adjacent_rate(il, idx, rate_scale_idx_msk, + tbl->lq_type); + low = high_low & 0xff; + high = (high_low >> 8) & 0xff; + + /* If user set max rate, dont allow higher than user constrain */ + if (lq_sta->max_rate_idx != -1 && lq_sta->max_rate_idx < high) + high = RATE_INVALID; + + sr = win->success_ratio; + + /* Collect measured throughputs for current and adjacent rates */ + current_tpt = win->average_tpt; + if (low != RATE_INVALID) + low_tpt = tbl->win[low].average_tpt; + if (high != RATE_INVALID) + high_tpt = tbl->win[high].average_tpt; + + scale_action = 0; + + /* Too many failures, decrease rate */ + if (sr <= RATE_DECREASE_TH || current_tpt == 0) { + D_RATE("decrease rate because of low success_ratio\n"); + scale_action = -1; + + /* No throughput measured yet for adjacent rates; try increase. */ + } else if (low_tpt == IL_INVALID_VALUE && high_tpt == IL_INVALID_VALUE) { + + if (high != RATE_INVALID && sr >= RATE_INCREASE_TH) + scale_action = 1; + else if (low != RATE_INVALID) + scale_action = 0; + } + + /* Both adjacent throughputs are measured, but neither one has better + * throughput; we're using the best rate, don't change it! */ + else if (low_tpt != IL_INVALID_VALUE && high_tpt != IL_INVALID_VALUE && + low_tpt < current_tpt && high_tpt < current_tpt) + scale_action = 0; + + /* At least one adjacent rate's throughput is measured, + * and may have better performance. */ + else { + /* Higher adjacent rate's throughput is measured */ + if (high_tpt != IL_INVALID_VALUE) { + /* Higher rate has better throughput */ + if (high_tpt > current_tpt && sr >= RATE_INCREASE_TH) + scale_action = 1; + else + scale_action = 0; + + /* Lower adjacent rate's throughput is measured */ + } else if (low_tpt != IL_INVALID_VALUE) { + /* Lower rate has better throughput */ + if (low_tpt > current_tpt) { + D_RATE("decrease rate because of low tpt\n"); + scale_action = -1; + } else if (sr >= RATE_INCREASE_TH) { + scale_action = 1; + } + } + } + + /* Sanity check; asked for decrease, but success rate or throughput + * has been good at old rate. Don't change it. */ + if (scale_action == -1 && low != RATE_INVALID && + (sr > RATE_HIGH_TH || current_tpt > 100 * tbl->expected_tpt[low])) + scale_action = 0; + + switch (scale_action) { + case -1: + /* Decrease starting rate, update uCode's rate table */ + if (low != RATE_INVALID) { + update_lq = 1; + idx = low; + } + + break; + case 1: + /* Increase starting rate, update uCode's rate table */ + if (high != RATE_INVALID) { + update_lq = 1; + idx = high; + } + + break; + case 0: + /* No change */ + default: + break; + } + + D_RATE("choose rate scale idx %d action %d low %d " "high %d type %d\n", + idx, scale_action, low, high, tbl->lq_type); + +lq_update: + /* Replace uCode's rate table for the destination station. */ + if (update_lq) + il4965_rs_update_rate_tbl(il, lq_sta, tbl, idx, is_green); + + /* Should we stay with this modulation mode, + * or search for a new one? */ + il4965_rs_stay_in_table(lq_sta, false); + + /* + * Search for new modulation mode if we're: + * 1) Not changing rates right now + * 2) Not just finishing up a search + * 3) Allowing a new search + */ + if (!update_lq && !done_search && !lq_sta->stay_in_tbl && win->counter) { + /* Save current throughput to compare with "search" throughput */ + lq_sta->last_tpt = current_tpt; + + /* Select a new "search" modulation mode to try. + * If one is found, set up the new "search" table. */ + if (is_legacy(tbl->lq_type)) + il4965_rs_move_legacy_other(il, lq_sta, conf, sta, idx); + else if (is_siso(tbl->lq_type)) + il4965_rs_move_siso_to_other(il, lq_sta, conf, sta, + idx); + else /* (is_mimo2(tbl->lq_type)) */ + il4965_rs_move_mimo2_to_other(il, lq_sta, conf, sta, + idx); + + /* If new "search" mode was selected, set up in uCode table */ + if (lq_sta->search_better_tbl) { + /* Access the "search" table, clear its history. */ + tbl = &(lq_sta->lq_info[(1 - lq_sta->active_tbl)]); + for (i = 0; i < RATE_COUNT; i++) + il4965_rs_rate_scale_clear_win(&(tbl->win[i])); + + /* Use new "search" start rate */ + idx = il4965_hwrate_to_plcp_idx(tbl->current_rate); + + D_RATE("Switch current mcs: %X idx: %d\n", + tbl->current_rate, idx); + il4965_rs_fill_link_cmd(il, lq_sta, tbl->current_rate); + il_send_lq_cmd(il, &lq_sta->lq, CMD_ASYNC, false); + } else + done_search = 1; + } + + if (done_search && !lq_sta->stay_in_tbl) { + /* If the "active" (non-search) mode was legacy, + * and we've tried switching antennas, + * but we haven't been able to try HT modes (not available), + * stay with best antenna legacy modulation for a while + * before next round of mode comparisons. */ + tbl1 = &(lq_sta->lq_info[lq_sta->active_tbl]); + if (is_legacy(tbl1->lq_type) && !conf_is_ht(conf) && + lq_sta->action_counter > tbl1->max_search) { + D_RATE("LQ: STAY in legacy table\n"); + il4965_rs_set_stay_in_table(il, 1, lq_sta); + } + + /* If we're in an HT mode, and all 3 mode switch actions + * have been tried and compared, stay in this best modulation + * mode for a while before next round of mode comparisons. */ + if (lq_sta->enable_counter && + lq_sta->action_counter >= tbl1->max_search) { + if (lq_sta->last_tpt > IL_AGG_TPT_THREHOLD && + (lq_sta->tx_agg_tid_en & (1 << tid)) && + tid != MAX_TID_COUNT) { + tid_data = + &il->stations[lq_sta->lq.sta_id].tid[tid]; + if (tid_data->agg.state == IL_AGG_OFF) { + D_RATE("try to aggregate tid %d\n", + tid); + il4965_rs_tl_turn_on_agg(il, tid, + lq_sta, sta); + } + } + il4965_rs_set_stay_in_table(il, 0, lq_sta); + } + } + +out: + tbl->current_rate = + il4965_rate_n_flags_from_tbl(il, tbl, idx, is_green); + i = idx; + lq_sta->last_txrate_idx = i; +} + +/** + * il4965_rs_initialize_lq - Initialize a station's hardware rate table + * + * The uCode's station table contains a table of fallback rates + * for automatic fallback during transmission. + * + * NOTE: This sets up a default set of values. These will be replaced later + * if the driver's iwl-4965-rs rate scaling algorithm is used, instead of + * rc80211_simple. + * + * NOTE: Run C_ADD_STA command to set up station table entry, before + * calling this function (which runs C_TX_LINK_QUALITY_CMD, + * which requires station table entry to exist). + */ +static void +il4965_rs_initialize_lq(struct il_priv *il, struct ieee80211_conf *conf, + struct ieee80211_sta *sta, struct il_lq_sta *lq_sta) +{ + struct il_scale_tbl_info *tbl; + int rate_idx; + int i; + u32 rate; + u8 use_green; + u8 active_tbl = 0; + u8 valid_tx_ant; + struct il_station_priv *sta_priv; + + if (!sta || !lq_sta) + return; + + use_green = il4965_rs_use_green(il, sta); + sta_priv = (void *)sta->drv_priv; + + i = lq_sta->last_txrate_idx; + + valid_tx_ant = il->hw_params.valid_tx_ant; + + if (!lq_sta->search_better_tbl) + active_tbl = lq_sta->active_tbl; + else + active_tbl = 1 - lq_sta->active_tbl; + + tbl = &(lq_sta->lq_info[active_tbl]); + + if (i < 0 || i >= RATE_COUNT) + i = 0; + + rate = il_rates[i].plcp; + tbl->ant_type = il4965_first_antenna(valid_tx_ant); + rate |= tbl->ant_type << RATE_MCS_ANT_POS; + + if (i >= IL_FIRST_CCK_RATE && i <= IL_LAST_CCK_RATE) + rate |= RATE_MCS_CCK_MSK; + + il4965_rs_get_tbl_info_from_mcs(rate, il->band, tbl, &rate_idx); + if (!il4965_rs_is_valid_ant(valid_tx_ant, tbl->ant_type)) + il4965_rs_toggle_antenna(valid_tx_ant, &rate, tbl); + + rate = il4965_rate_n_flags_from_tbl(il, tbl, rate_idx, use_green); + tbl->current_rate = rate; + il4965_rs_set_expected_tpt_table(lq_sta, tbl); + il4965_rs_fill_link_cmd(NULL, lq_sta, rate); + il->stations[lq_sta->lq.sta_id].lq = &lq_sta->lq; + il_send_lq_cmd(il, &lq_sta->lq, CMD_SYNC, true); +} + +static void +il4965_rs_get_rate(void *il_r, struct ieee80211_sta *sta, void *il_sta, + struct ieee80211_tx_rate_control *txrc) +{ + + struct sk_buff *skb = txrc->skb; + struct ieee80211_supported_band *sband = txrc->sband; + struct il_priv *il __maybe_unused = (struct il_priv *)il_r; + struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb); + struct il_lq_sta *lq_sta = il_sta; + int rate_idx; + + D_RATE("rate scale calculate new rate for skb\n"); + + /* Get max rate if user set max rate */ + if (lq_sta) { + lq_sta->max_rate_idx = txrc->max_rate_idx; + if (sband->band == IEEE80211_BAND_5GHZ && + lq_sta->max_rate_idx != -1) + lq_sta->max_rate_idx += IL_FIRST_OFDM_RATE; + if (lq_sta->max_rate_idx < 0 || + lq_sta->max_rate_idx >= RATE_COUNT) + lq_sta->max_rate_idx = -1; + } + + /* Treat uninitialized rate scaling data same as non-existing. */ + if (lq_sta && !lq_sta->drv) { + D_RATE("Rate scaling not initialized yet.\n"); + il_sta = NULL; + } + + /* Send management frames and NO_ACK data using lowest rate. */ + if (rate_control_send_low(sta, il_sta, txrc)) + return; + + if (!lq_sta) + return; + + rate_idx = lq_sta->last_txrate_idx; + + if (lq_sta->last_rate_n_flags & RATE_MCS_HT_MSK) { + rate_idx -= IL_FIRST_OFDM_RATE; + /* 6M and 9M shared same MCS idx */ + rate_idx = (rate_idx > 0) ? (rate_idx - 1) : 0; + if (il4965_rs_extract_rate(lq_sta->last_rate_n_flags) >= + RATE_MIMO2_6M_PLCP) + rate_idx = rate_idx + MCS_IDX_PER_STREAM; + info->control.rates[0].flags = IEEE80211_TX_RC_MCS; + if (lq_sta->last_rate_n_flags & RATE_MCS_SGI_MSK) + info->control.rates[0].flags |= + IEEE80211_TX_RC_SHORT_GI; + if (lq_sta->last_rate_n_flags & RATE_MCS_DUP_MSK) + info->control.rates[0].flags |= + IEEE80211_TX_RC_DUP_DATA; + if (lq_sta->last_rate_n_flags & RATE_MCS_HT40_MSK) + info->control.rates[0].flags |= + IEEE80211_TX_RC_40_MHZ_WIDTH; + if (lq_sta->last_rate_n_flags & RATE_MCS_GF_MSK) + info->control.rates[0].flags |= + IEEE80211_TX_RC_GREEN_FIELD; + } else { + /* Check for invalid rates */ + if (rate_idx < 0 || rate_idx >= RATE_COUNT_LEGACY || + (sband->band == IEEE80211_BAND_5GHZ && + rate_idx < IL_FIRST_OFDM_RATE)) + rate_idx = rate_lowest_index(sband, sta); + /* On valid 5 GHz rate, adjust idx */ + else if (sband->band == IEEE80211_BAND_5GHZ) + rate_idx -= IL_FIRST_OFDM_RATE; + info->control.rates[0].flags = 0; + } + info->control.rates[0].idx = rate_idx; + info->control.rates[0].count = 1; +} + +static void * +il4965_rs_alloc_sta(void *il_rate, struct ieee80211_sta *sta, gfp_t gfp) +{ + struct il_station_priv *sta_priv = + (struct il_station_priv *)sta->drv_priv; + struct il_priv *il; + + il = (struct il_priv *)il_rate; + D_RATE("create station rate scale win\n"); + + return &sta_priv->lq_sta; +} + +/* + * Called after adding a new station to initialize rate scaling + */ +void +il4965_rs_rate_init(struct il_priv *il, struct ieee80211_sta *sta, u8 sta_id) +{ + int i, j; + struct ieee80211_hw *hw = il->hw; + struct ieee80211_conf *conf = &il->hw->conf; + struct ieee80211_sta_ht_cap *ht_cap = &sta->ht_cap; + struct il_station_priv *sta_priv; + struct il_lq_sta *lq_sta; + struct ieee80211_supported_band *sband; + + sta_priv = (struct il_station_priv *)sta->drv_priv; + lq_sta = &sta_priv->lq_sta; + sband = hw->wiphy->bands[conf->chandef.chan->band]; + + lq_sta->lq.sta_id = sta_id; + + for (j = 0; j < LQ_SIZE; j++) + for (i = 0; i < RATE_COUNT; i++) + il4965_rs_rate_scale_clear_win(&lq_sta->lq_info[j]. + win[i]); + + lq_sta->flush_timer = 0; + lq_sta->supp_rates = sta->supp_rates[sband->band]; + for (j = 0; j < LQ_SIZE; j++) + for (i = 0; i < RATE_COUNT; i++) + il4965_rs_rate_scale_clear_win(&lq_sta->lq_info[j]. + win[i]); + + D_RATE("LQ:" "*** rate scale station global init for station %d ***\n", + sta_id); + /* TODO: what is a good starting rate for STA? About middle? Maybe not + * the lowest or the highest rate.. Could consider using RSSI from + * previous packets? Need to have IEEE 802.1X auth succeed immediately + * after assoc.. */ + + lq_sta->is_dup = 0; + lq_sta->max_rate_idx = -1; + lq_sta->missed_rate_counter = IL_MISSED_RATE_MAX; + lq_sta->is_green = il4965_rs_use_green(il, sta); + lq_sta->active_legacy_rate = il->active_rate & ~(0x1000); + lq_sta->band = il->band; + /* + * active_siso_rate mask includes 9 MBits (bit 5), and CCK (bits 0-3), + * supp_rates[] does not; shift to convert format, force 9 MBits off. + */ + lq_sta->active_siso_rate = ht_cap->mcs.rx_mask[0] << 1; + lq_sta->active_siso_rate |= ht_cap->mcs.rx_mask[0] & 0x1; + lq_sta->active_siso_rate &= ~((u16) 0x2); + lq_sta->active_siso_rate <<= IL_FIRST_OFDM_RATE; + + /* Same here */ + lq_sta->active_mimo2_rate = ht_cap->mcs.rx_mask[1] << 1; + lq_sta->active_mimo2_rate |= ht_cap->mcs.rx_mask[1] & 0x1; + lq_sta->active_mimo2_rate &= ~((u16) 0x2); + lq_sta->active_mimo2_rate <<= IL_FIRST_OFDM_RATE; + + /* These values will be overridden later */ + lq_sta->lq.general_params.single_stream_ant_msk = + il4965_first_antenna(il->hw_params.valid_tx_ant); + lq_sta->lq.general_params.dual_stream_ant_msk = + il->hw_params.valid_tx_ant & ~il4965_first_antenna(il->hw_params. + valid_tx_ant); + if (!lq_sta->lq.general_params.dual_stream_ant_msk) { + lq_sta->lq.general_params.dual_stream_ant_msk = ANT_AB; + } else if (il4965_num_of_ant(il->hw_params.valid_tx_ant) == 2) { + lq_sta->lq.general_params.dual_stream_ant_msk = + il->hw_params.valid_tx_ant; + } + + /* as default allow aggregation for all tids */ + lq_sta->tx_agg_tid_en = IL_AGG_ALL_TID; + lq_sta->drv = il; + + /* Set last_txrate_idx to lowest rate */ + lq_sta->last_txrate_idx = rate_lowest_index(sband, sta); + if (sband->band == IEEE80211_BAND_5GHZ) + lq_sta->last_txrate_idx += IL_FIRST_OFDM_RATE; + lq_sta->is_agg = 0; + +#ifdef CONFIG_MAC80211_DEBUGFS + lq_sta->dbg_fixed_rate = 0; +#endif + + il4965_rs_initialize_lq(il, conf, sta, lq_sta); +} + +static void +il4965_rs_fill_link_cmd(struct il_priv *il, struct il_lq_sta *lq_sta, + u32 new_rate) +{ + struct il_scale_tbl_info tbl_type; + int idx = 0; + int rate_idx; + int repeat_rate = 0; + u8 ant_toggle_cnt = 0; + u8 use_ht_possible = 1; + u8 valid_tx_ant = 0; + struct il_link_quality_cmd *lq_cmd = &lq_sta->lq; + + /* Override starting rate (idx 0) if needed for debug purposes */ + il4965_rs_dbgfs_set_mcs(lq_sta, &new_rate, idx); + + /* Interpret new_rate (rate_n_flags) */ + il4965_rs_get_tbl_info_from_mcs(new_rate, lq_sta->band, &tbl_type, + &rate_idx); + + /* How many times should we repeat the initial rate? */ + if (is_legacy(tbl_type.lq_type)) { + ant_toggle_cnt = 1; + repeat_rate = IL_NUMBER_TRY; + } else { + repeat_rate = IL_HT_NUMBER_TRY; + } + + lq_cmd->general_params.mimo_delimiter = + is_mimo(tbl_type.lq_type) ? 1 : 0; + + /* Fill 1st table entry (idx 0) */ + lq_cmd->rs_table[idx].rate_n_flags = cpu_to_le32(new_rate); + + if (il4965_num_of_ant(tbl_type.ant_type) == 1) { + lq_cmd->general_params.single_stream_ant_msk = + tbl_type.ant_type; + } else if (il4965_num_of_ant(tbl_type.ant_type) == 2) { + lq_cmd->general_params.dual_stream_ant_msk = tbl_type.ant_type; + } + /* otherwise we don't modify the existing value */ + idx++; + repeat_rate--; + if (il) + valid_tx_ant = il->hw_params.valid_tx_ant; + + /* Fill rest of rate table */ + while (idx < LINK_QUAL_MAX_RETRY_NUM) { + /* Repeat initial/next rate. + * For legacy IL_NUMBER_TRY == 1, this loop will not execute. + * For HT IL_HT_NUMBER_TRY == 3, this executes twice. */ + while (repeat_rate > 0 && idx < LINK_QUAL_MAX_RETRY_NUM) { + if (is_legacy(tbl_type.lq_type)) { + if (ant_toggle_cnt < NUM_TRY_BEFORE_ANT_TOGGLE) + ant_toggle_cnt++; + else if (il && + il4965_rs_toggle_antenna(valid_tx_ant, + &new_rate, + &tbl_type)) + ant_toggle_cnt = 1; + } + + /* Override next rate if needed for debug purposes */ + il4965_rs_dbgfs_set_mcs(lq_sta, &new_rate, idx); + + /* Fill next table entry */ + lq_cmd->rs_table[idx].rate_n_flags = + cpu_to_le32(new_rate); + repeat_rate--; + idx++; + } + + il4965_rs_get_tbl_info_from_mcs(new_rate, lq_sta->band, + &tbl_type, &rate_idx); + + /* Indicate to uCode which entries might be MIMO. + * If initial rate was MIMO, this will finally end up + * as (IL_HT_NUMBER_TRY * 2), after 2nd pass, otherwise 0. */ + if (is_mimo(tbl_type.lq_type)) + lq_cmd->general_params.mimo_delimiter = idx; + + /* Get next rate */ + new_rate = + il4965_rs_get_lower_rate(lq_sta, &tbl_type, rate_idx, + use_ht_possible); + + /* How many times should we repeat the next rate? */ + if (is_legacy(tbl_type.lq_type)) { + if (ant_toggle_cnt < NUM_TRY_BEFORE_ANT_TOGGLE) + ant_toggle_cnt++; + else if (il && + il4965_rs_toggle_antenna(valid_tx_ant, + &new_rate, &tbl_type)) + ant_toggle_cnt = 1; + + repeat_rate = IL_NUMBER_TRY; + } else { + repeat_rate = IL_HT_NUMBER_TRY; + } + + /* Don't allow HT rates after next pass. + * il4965_rs_get_lower_rate() will change type to LQ_A or LQ_G. */ + use_ht_possible = 0; + + /* Override next rate if needed for debug purposes */ + il4965_rs_dbgfs_set_mcs(lq_sta, &new_rate, idx); + + /* Fill next table entry */ + lq_cmd->rs_table[idx].rate_n_flags = cpu_to_le32(new_rate); + + idx++; + repeat_rate--; + } + + lq_cmd->agg_params.agg_frame_cnt_limit = LINK_QUAL_AGG_FRAME_LIMIT_DEF; + lq_cmd->agg_params.agg_dis_start_th = LINK_QUAL_AGG_DISABLE_START_DEF; + + lq_cmd->agg_params.agg_time_limit = + cpu_to_le16(LINK_QUAL_AGG_TIME_LIMIT_DEF); +} + +static void * +il4965_rs_alloc(struct ieee80211_hw *hw, struct dentry *debugfsdir) +{ + return hw->priv; +} + +/* rate scale requires free function to be implemented */ +static void +il4965_rs_free(void *il_rate) +{ + return; +} + +static void +il4965_rs_free_sta(void *il_r, struct ieee80211_sta *sta, void *il_sta) +{ + struct il_priv *il __maybe_unused = il_r; + + D_RATE("enter\n"); + D_RATE("leave\n"); +} + +#ifdef CONFIG_MAC80211_DEBUGFS + +static void +il4965_rs_dbgfs_set_mcs(struct il_lq_sta *lq_sta, u32 * rate_n_flags, int idx) +{ + struct il_priv *il; + u8 valid_tx_ant; + u8 ant_sel_tx; + + il = lq_sta->drv; + valid_tx_ant = il->hw_params.valid_tx_ant; + if (lq_sta->dbg_fixed_rate) { + ant_sel_tx = + ((lq_sta-> + dbg_fixed_rate & RATE_MCS_ANT_ABC_MSK) >> + RATE_MCS_ANT_POS); + if ((valid_tx_ant & ant_sel_tx) == ant_sel_tx) { + *rate_n_flags = lq_sta->dbg_fixed_rate; + D_RATE("Fixed rate ON\n"); + } else { + lq_sta->dbg_fixed_rate = 0; + IL_ERR + ("Invalid antenna selection 0x%X, Valid is 0x%X\n", + ant_sel_tx, valid_tx_ant); + D_RATE("Fixed rate OFF\n"); + } + } else { + D_RATE("Fixed rate OFF\n"); + } +} + +static ssize_t +il4965_rs_sta_dbgfs_scale_table_write(struct file *file, + const char __user *user_buf, + size_t count, loff_t *ppos) +{ + struct il_lq_sta *lq_sta = file->private_data; + struct il_priv *il; + char buf[64]; + size_t buf_size; + u32 parsed_rate; + + il = lq_sta->drv; + memset(buf, 0, sizeof(buf)); + buf_size = min(count, sizeof(buf) - 1); + if (copy_from_user(buf, user_buf, buf_size)) + return -EFAULT; + + if (sscanf(buf, "%x", &parsed_rate) == 1) + lq_sta->dbg_fixed_rate = parsed_rate; + else + lq_sta->dbg_fixed_rate = 0; + + lq_sta->active_legacy_rate = 0x0FFF; /* 1 - 54 MBits, includes CCK */ + lq_sta->active_siso_rate = 0x1FD0; /* 6 - 60 MBits, no 9, no CCK */ + lq_sta->active_mimo2_rate = 0x1FD0; /* 6 - 60 MBits, no 9, no CCK */ + + D_RATE("sta_id %d rate 0x%X\n", lq_sta->lq.sta_id, + lq_sta->dbg_fixed_rate); + + if (lq_sta->dbg_fixed_rate) { + il4965_rs_fill_link_cmd(NULL, lq_sta, lq_sta->dbg_fixed_rate); + il_send_lq_cmd(lq_sta->drv, &lq_sta->lq, CMD_ASYNC, false); + } + + return count; +} + +static ssize_t +il4965_rs_sta_dbgfs_scale_table_read(struct file *file, char __user *user_buf, + size_t count, loff_t *ppos) +{ + char *buff; + int desc = 0; + int i = 0; + int idx = 0; + ssize_t ret; + + struct il_lq_sta *lq_sta = file->private_data; + struct il_priv *il; + struct il_scale_tbl_info *tbl = &(lq_sta->lq_info[lq_sta->active_tbl]); + + il = lq_sta->drv; + buff = kmalloc(1024, GFP_KERNEL); + if (!buff) + return -ENOMEM; + + desc += sprintf(buff + desc, "sta_id %d\n", lq_sta->lq.sta_id); + desc += + sprintf(buff + desc, "failed=%d success=%d rate=0%X\n", + lq_sta->total_failed, lq_sta->total_success, + lq_sta->active_legacy_rate); + desc += + sprintf(buff + desc, "fixed rate 0x%X\n", lq_sta->dbg_fixed_rate); + desc += + sprintf(buff + desc, "valid_tx_ant %s%s%s\n", + (il->hw_params.valid_tx_ant & ANT_A) ? "ANT_A," : "", + (il->hw_params.valid_tx_ant & ANT_B) ? "ANT_B," : "", + (il->hw_params.valid_tx_ant & ANT_C) ? "ANT_C" : ""); + desc += + sprintf(buff + desc, "lq type %s\n", + (is_legacy(tbl->lq_type)) ? "legacy" : "HT"); + if (is_Ht(tbl->lq_type)) { + desc += + sprintf(buff + desc, " %s", + (is_siso(tbl->lq_type)) ? "SISO" : "MIMO2"); + desc += + sprintf(buff + desc, " %s", + (tbl->is_ht40) ? "40MHz" : "20MHz"); + desc += + sprintf(buff + desc, " %s %s %s\n", + (tbl->is_SGI) ? "SGI" : "", + (lq_sta->is_green) ? "GF enabled" : "", + (lq_sta->is_agg) ? "AGG on" : ""); + } + desc += + sprintf(buff + desc, "last tx rate=0x%X\n", + lq_sta->last_rate_n_flags); + desc += + sprintf(buff + desc, + "general:" "flags=0x%X mimo-d=%d s-ant0x%x d-ant=0x%x\n", + lq_sta->lq.general_params.flags, + lq_sta->lq.general_params.mimo_delimiter, + lq_sta->lq.general_params.single_stream_ant_msk, + lq_sta->lq.general_params.dual_stream_ant_msk); + + desc += + sprintf(buff + desc, + "agg:" + "time_limit=%d dist_start_th=%d frame_cnt_limit=%d\n", + le16_to_cpu(lq_sta->lq.agg_params.agg_time_limit), + lq_sta->lq.agg_params.agg_dis_start_th, + lq_sta->lq.agg_params.agg_frame_cnt_limit); + + desc += + sprintf(buff + desc, + "Start idx [0]=0x%x [1]=0x%x [2]=0x%x [3]=0x%x\n", + lq_sta->lq.general_params.start_rate_idx[0], + lq_sta->lq.general_params.start_rate_idx[1], + lq_sta->lq.general_params.start_rate_idx[2], + lq_sta->lq.general_params.start_rate_idx[3]); + + for (i = 0; i < LINK_QUAL_MAX_RETRY_NUM; i++) { + idx = + il4965_hwrate_to_plcp_idx(le32_to_cpu + (lq_sta->lq.rs_table[i]. + rate_n_flags)); + if (is_legacy(tbl->lq_type)) { + desc += + sprintf(buff + desc, " rate[%d] 0x%X %smbps\n", i, + le32_to_cpu(lq_sta->lq.rs_table[i]. + rate_n_flags), + il_rate_mcs[idx].mbps); + } else { + desc += + sprintf(buff + desc, " rate[%d] 0x%X %smbps (%s)\n", + i, + le32_to_cpu(lq_sta->lq.rs_table[i]. + rate_n_flags), + il_rate_mcs[idx].mbps, + il_rate_mcs[idx].mcs); + } + } + + ret = simple_read_from_buffer(user_buf, count, ppos, buff, desc); + kfree(buff); + return ret; +} + +static const struct file_operations rs_sta_dbgfs_scale_table_ops = { + .write = il4965_rs_sta_dbgfs_scale_table_write, + .read = il4965_rs_sta_dbgfs_scale_table_read, + .open = simple_open, + .llseek = default_llseek, +}; + +static ssize_t +il4965_rs_sta_dbgfs_stats_table_read(struct file *file, char __user *user_buf, + size_t count, loff_t *ppos) +{ + char *buff; + int desc = 0; + int i, j; + ssize_t ret; + + struct il_lq_sta *lq_sta = file->private_data; + + buff = kmalloc(1024, GFP_KERNEL); + if (!buff) + return -ENOMEM; + + for (i = 0; i < LQ_SIZE; i++) { + desc += + sprintf(buff + desc, + "%s type=%d SGI=%d HT40=%d DUP=%d GF=%d\n" + "rate=0x%X\n", lq_sta->active_tbl == i ? "*" : "x", + lq_sta->lq_info[i].lq_type, + lq_sta->lq_info[i].is_SGI, + lq_sta->lq_info[i].is_ht40, + lq_sta->lq_info[i].is_dup, lq_sta->is_green, + lq_sta->lq_info[i].current_rate); + for (j = 0; j < RATE_COUNT; j++) { + desc += + sprintf(buff + desc, + "counter=%d success=%d %%=%d\n", + lq_sta->lq_info[i].win[j].counter, + lq_sta->lq_info[i].win[j].success_counter, + lq_sta->lq_info[i].win[j].success_ratio); + } + } + ret = simple_read_from_buffer(user_buf, count, ppos, buff, desc); + kfree(buff); + return ret; +} + +static const struct file_operations rs_sta_dbgfs_stats_table_ops = { + .read = il4965_rs_sta_dbgfs_stats_table_read, + .open = simple_open, + .llseek = default_llseek, +}; + +static ssize_t +il4965_rs_sta_dbgfs_rate_scale_data_read(struct file *file, + char __user *user_buf, size_t count, + loff_t *ppos) +{ + char buff[120]; + int desc = 0; + struct il_lq_sta *lq_sta = file->private_data; + struct il_scale_tbl_info *tbl = &lq_sta->lq_info[lq_sta->active_tbl]; + + if (is_Ht(tbl->lq_type)) + desc += + sprintf(buff + desc, "Bit Rate= %d Mb/s\n", + tbl->expected_tpt[lq_sta->last_txrate_idx]); + else + desc += + sprintf(buff + desc, "Bit Rate= %d Mb/s\n", + il_rates[lq_sta->last_txrate_idx].ieee >> 1); + + return simple_read_from_buffer(user_buf, count, ppos, buff, desc); +} + +static const struct file_operations rs_sta_dbgfs_rate_scale_data_ops = { + .read = il4965_rs_sta_dbgfs_rate_scale_data_read, + .open = simple_open, + .llseek = default_llseek, +}; + +static void +il4965_rs_add_debugfs(void *il, void *il_sta, struct dentry *dir) +{ + struct il_lq_sta *lq_sta = il_sta; + lq_sta->rs_sta_dbgfs_scale_table_file = + debugfs_create_file("rate_scale_table", S_IRUSR | S_IWUSR, dir, + lq_sta, &rs_sta_dbgfs_scale_table_ops); + lq_sta->rs_sta_dbgfs_stats_table_file = + debugfs_create_file("rate_stats_table", S_IRUSR, dir, lq_sta, + &rs_sta_dbgfs_stats_table_ops); + lq_sta->rs_sta_dbgfs_rate_scale_data_file = + debugfs_create_file("rate_scale_data", S_IRUSR, dir, lq_sta, + &rs_sta_dbgfs_rate_scale_data_ops); + lq_sta->rs_sta_dbgfs_tx_agg_tid_en_file = + debugfs_create_u8("tx_agg_tid_enable", S_IRUSR | S_IWUSR, dir, + &lq_sta->tx_agg_tid_en); + +} + +static void +il4965_rs_remove_debugfs(void *il, void *il_sta) +{ + struct il_lq_sta *lq_sta = il_sta; + debugfs_remove(lq_sta->rs_sta_dbgfs_scale_table_file); + debugfs_remove(lq_sta->rs_sta_dbgfs_stats_table_file); + debugfs_remove(lq_sta->rs_sta_dbgfs_rate_scale_data_file); + debugfs_remove(lq_sta->rs_sta_dbgfs_tx_agg_tid_en_file); +} +#endif + +/* + * Initialization of rate scaling information is done by driver after + * the station is added. Since mac80211 calls this function before a + * station is added we ignore it. + */ +static void +il4965_rs_rate_init_stub(void *il_r, struct ieee80211_supported_band *sband, + struct cfg80211_chan_def *chandef, + struct ieee80211_sta *sta, void *il_sta) +{ +} + +static const struct rate_control_ops rs_4965_ops = { + .name = IL4965_RS_NAME, + .tx_status = il4965_rs_tx_status, + .get_rate = il4965_rs_get_rate, + .rate_init = il4965_rs_rate_init_stub, + .alloc = il4965_rs_alloc, + .free = il4965_rs_free, + .alloc_sta = il4965_rs_alloc_sta, + .free_sta = il4965_rs_free_sta, +#ifdef CONFIG_MAC80211_DEBUGFS + .add_sta_debugfs = il4965_rs_add_debugfs, + .remove_sta_debugfs = il4965_rs_remove_debugfs, +#endif +}; + +int +il4965_rate_control_register(void) +{ + return ieee80211_rate_control_register(&rs_4965_ops); +} + +void +il4965_rate_control_unregister(void) +{ + ieee80211_rate_control_unregister(&rs_4965_ops); +} |