summaryrefslogtreecommitdiff
path: root/drivers/net/qlge/qlge_mpi.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/net/qlge/qlge_mpi.c')
-rw-r--r--drivers/net/qlge/qlge_mpi.c340
1 files changed, 249 insertions, 91 deletions
diff --git a/drivers/net/qlge/qlge_mpi.c b/drivers/net/qlge/qlge_mpi.c
index e2b2286102d4..3c00462a5d22 100644
--- a/drivers/net/qlge/qlge_mpi.c
+++ b/drivers/net/qlge/qlge_mpi.c
@@ -1,5 +1,54 @@
#include "qlge.h"
+int ql_unpause_mpi_risc(struct ql_adapter *qdev)
+{
+ u32 tmp;
+
+ /* Un-pause the RISC */
+ tmp = ql_read32(qdev, CSR);
+ if (!(tmp & CSR_RP))
+ return -EIO;
+
+ ql_write32(qdev, CSR, CSR_CMD_CLR_PAUSE);
+ return 0;
+}
+
+int ql_pause_mpi_risc(struct ql_adapter *qdev)
+{
+ u32 tmp;
+ int count = UDELAY_COUNT;
+
+ /* Pause the RISC */
+ ql_write32(qdev, CSR, CSR_CMD_SET_PAUSE);
+ do {
+ tmp = ql_read32(qdev, CSR);
+ if (tmp & CSR_RP)
+ break;
+ mdelay(UDELAY_DELAY);
+ count--;
+ } while (count);
+ return (count == 0) ? -ETIMEDOUT : 0;
+}
+
+int ql_hard_reset_mpi_risc(struct ql_adapter *qdev)
+{
+ u32 tmp;
+ int count = UDELAY_COUNT;
+
+ /* Reset the RISC */
+ ql_write32(qdev, CSR, CSR_CMD_SET_RST);
+ do {
+ tmp = ql_read32(qdev, CSR);
+ if (tmp & CSR_RR) {
+ ql_write32(qdev, CSR, CSR_CMD_CLR_RST);
+ break;
+ }
+ mdelay(UDELAY_DELAY);
+ count--;
+ } while (count);
+ return (count == 0) ? -ETIMEDOUT : 0;
+}
+
int ql_read_mpi_reg(struct ql_adapter *qdev, u32 reg, u32 *data)
{
int status;
@@ -45,6 +94,35 @@ int ql_soft_reset_mpi_risc(struct ql_adapter *qdev)
return status;
}
+/* Determine if we are in charge of the firwmare. If
+ * we are the lower of the 2 NIC pcie functions, or if
+ * we are the higher function and the lower function
+ * is not enabled.
+ */
+int ql_own_firmware(struct ql_adapter *qdev)
+{
+ u32 temp;
+
+ /* If we are the lower of the 2 NIC functions
+ * on the chip the we are responsible for
+ * core dump and firmware reset after an error.
+ */
+ if (qdev->func < qdev->alt_func)
+ return 1;
+
+ /* If we are the higher of the 2 NIC functions
+ * on the chip and the lower function is not
+ * enabled, then we are responsible for
+ * core dump and firmware reset after an error.
+ */
+ temp = ql_read32(qdev, STS);
+ if (!(temp & (1 << (8 + qdev->alt_func))))
+ return 1;
+
+ return 0;
+
+}
+
static int ql_get_mb_sts(struct ql_adapter *qdev, struct mbox_params *mbcp)
{
int i, status;
@@ -57,7 +135,7 @@ static int ql_get_mb_sts(struct ql_adapter *qdev, struct mbox_params *mbcp)
ql_read_mpi_reg(qdev, qdev->mailbox_out + i,
&mbcp->mbox_out[i]);
if (status) {
- QPRINTK(qdev, DRV, ERR, "Failed mailbox read.\n");
+ netif_err(qdev, drv, qdev->ndev, "Failed mailbox read.\n");
break;
}
}
@@ -130,7 +208,7 @@ static int ql_idc_req_aen(struct ql_adapter *qdev)
int status;
struct mbox_params *mbcp = &qdev->idc_mbc;
- QPRINTK(qdev, DRV, ERR, "Enter!\n");
+ netif_err(qdev, drv, qdev->ndev, "Enter!\n");
/* Get the status data and start up a thread to
* handle the request.
*/
@@ -138,8 +216,8 @@ static int ql_idc_req_aen(struct ql_adapter *qdev)
mbcp->out_count = 4;
status = ql_get_mb_sts(qdev, mbcp);
if (status) {
- QPRINTK(qdev, DRV, ERR,
- "Could not read MPI, resetting ASIC!\n");
+ netif_err(qdev, drv, qdev->ndev,
+ "Could not read MPI, resetting ASIC!\n");
ql_queue_asic_error(qdev);
} else {
/* Begin polled mode early so
@@ -162,8 +240,8 @@ static int ql_idc_cmplt_aen(struct ql_adapter *qdev)
mbcp->out_count = 4;
status = ql_get_mb_sts(qdev, mbcp);
if (status) {
- QPRINTK(qdev, DRV, ERR,
- "Could not read MPI, resetting RISC!\n");
+ netif_err(qdev, drv, qdev->ndev,
+ "Could not read MPI, resetting RISC!\n");
ql_queue_fw_error(qdev);
} else
/* Wake up the sleeping mpi_idc_work thread that is
@@ -181,13 +259,13 @@ static void ql_link_up(struct ql_adapter *qdev, struct mbox_params *mbcp)
status = ql_get_mb_sts(qdev, mbcp);
if (status) {
- QPRINTK(qdev, DRV, ERR,
- "%s: Could not get mailbox status.\n", __func__);
+ netif_err(qdev, drv, qdev->ndev,
+ "%s: Could not get mailbox status.\n", __func__);
return;
}
qdev->link_status = mbcp->mbox_out[1];
- QPRINTK(qdev, DRV, ERR, "Link Up.\n");
+ netif_err(qdev, drv, qdev->ndev, "Link Up.\n");
/* If we're coming back from an IDC event
* then set up the CAM and frame routing.
@@ -195,8 +273,8 @@ static void ql_link_up(struct ql_adapter *qdev, struct mbox_params *mbcp)
if (test_bit(QL_CAM_RT_SET, &qdev->flags)) {
status = ql_cam_route_initialize(qdev);
if (status) {
- QPRINTK(qdev, IFUP, ERR,
- "Failed to init CAM/Routing tables.\n");
+ netif_err(qdev, ifup, qdev->ndev,
+ "Failed to init CAM/Routing tables.\n");
return;
} else
clear_bit(QL_CAM_RT_SET, &qdev->flags);
@@ -207,7 +285,7 @@ static void ql_link_up(struct ql_adapter *qdev, struct mbox_params *mbcp)
* to our liking.
*/
if (!test_bit(QL_PORT_CFG, &qdev->flags)) {
- QPRINTK(qdev, DRV, ERR, "Queue Port Config Worker!\n");
+ netif_err(qdev, drv, qdev->ndev, "Queue Port Config Worker!\n");
set_bit(QL_PORT_CFG, &qdev->flags);
/* Begin polled mode early so
* we don't get another interrupt
@@ -229,7 +307,7 @@ static void ql_link_down(struct ql_adapter *qdev, struct mbox_params *mbcp)
status = ql_get_mb_sts(qdev, mbcp);
if (status)
- QPRINTK(qdev, DRV, ERR, "Link down AEN broken!\n");
+ netif_err(qdev, drv, qdev->ndev, "Link down AEN broken!\n");
ql_link_off(qdev);
}
@@ -242,9 +320,9 @@ static int ql_sfp_in(struct ql_adapter *qdev, struct mbox_params *mbcp)
status = ql_get_mb_sts(qdev, mbcp);
if (status)
- QPRINTK(qdev, DRV, ERR, "SFP in AEN broken!\n");
+ netif_err(qdev, drv, qdev->ndev, "SFP in AEN broken!\n");
else
- QPRINTK(qdev, DRV, ERR, "SFP insertion detected.\n");
+ netif_err(qdev, drv, qdev->ndev, "SFP insertion detected.\n");
return status;
}
@@ -257,9 +335,9 @@ static int ql_sfp_out(struct ql_adapter *qdev, struct mbox_params *mbcp)
status = ql_get_mb_sts(qdev, mbcp);
if (status)
- QPRINTK(qdev, DRV, ERR, "SFP out AEN broken!\n");
+ netif_err(qdev, drv, qdev->ndev, "SFP out AEN broken!\n");
else
- QPRINTK(qdev, DRV, ERR, "SFP removal detected.\n");
+ netif_err(qdev, drv, qdev->ndev, "SFP removal detected.\n");
return status;
}
@@ -272,13 +350,13 @@ static int ql_aen_lost(struct ql_adapter *qdev, struct mbox_params *mbcp)
status = ql_get_mb_sts(qdev, mbcp);
if (status)
- QPRINTK(qdev, DRV, ERR, "Lost AEN broken!\n");
+ netif_err(qdev, drv, qdev->ndev, "Lost AEN broken!\n");
else {
int i;
- QPRINTK(qdev, DRV, ERR, "Lost AEN detected.\n");
+ netif_err(qdev, drv, qdev->ndev, "Lost AEN detected.\n");
for (i = 0; i < mbcp->out_count; i++)
- QPRINTK(qdev, DRV, ERR, "mbox_out[%d] = 0x%.08x.\n",
- i, mbcp->mbox_out[i]);
+ netif_err(qdev, drv, qdev->ndev, "mbox_out[%d] = 0x%.08x.\n",
+ i, mbcp->mbox_out[i]);
}
@@ -293,15 +371,15 @@ static void ql_init_fw_done(struct ql_adapter *qdev, struct mbox_params *mbcp)
status = ql_get_mb_sts(qdev, mbcp);
if (status) {
- QPRINTK(qdev, DRV, ERR, "Firmware did not initialize!\n");
+ netif_err(qdev, drv, qdev->ndev, "Firmware did not initialize!\n");
} else {
- QPRINTK(qdev, DRV, ERR, "Firmware Revision = 0x%.08x.\n",
- mbcp->mbox_out[1]);
+ netif_err(qdev, drv, qdev->ndev, "Firmware Revision = 0x%.08x.\n",
+ mbcp->mbox_out[1]);
qdev->fw_rev_id = mbcp->mbox_out[1];
status = ql_cam_route_initialize(qdev);
if (status)
- QPRINTK(qdev, IFUP, ERR,
- "Failed to init CAM/Routing tables.\n");
+ netif_err(qdev, ifup, qdev->ndev,
+ "Failed to init CAM/Routing tables.\n");
}
}
@@ -320,8 +398,8 @@ static int ql_mpi_handler(struct ql_adapter *qdev, struct mbox_params *mbcp)
mbcp->out_count = 1;
status = ql_get_mb_sts(qdev, mbcp);
if (status) {
- QPRINTK(qdev, DRV, ERR,
- "Could not read MPI, resetting ASIC!\n");
+ netif_err(qdev, drv, qdev->ndev,
+ "Could not read MPI, resetting ASIC!\n");
ql_queue_asic_error(qdev);
goto end;
}
@@ -410,15 +488,14 @@ static int ql_mpi_handler(struct ql_adapter *qdev, struct mbox_params *mbcp)
mbcp->mbox_out[0] = MB_CMD_STS_ERR;
return status;
}
- QPRINTK(qdev, DRV, ERR,
- "Firmware initialization failed.\n");
+ netif_err(qdev, drv, qdev->ndev,
+ "Firmware initialization failed.\n");
status = -EIO;
ql_queue_fw_error(qdev);
break;
case AEN_SYS_ERR:
- QPRINTK(qdev, DRV, ERR,
- "System Error.\n");
+ netif_err(qdev, drv, qdev->ndev, "System Error.\n");
ql_queue_fw_error(qdev);
status = -EIO;
break;
@@ -431,8 +508,8 @@ static int ql_mpi_handler(struct ql_adapter *qdev, struct mbox_params *mbcp)
/* Need to support AEN 8110 */
break;
default:
- QPRINTK(qdev, DRV, ERR,
- "Unsupported AE %.08x.\n", mbcp->mbox_out[0]);
+ netif_err(qdev, drv, qdev->ndev,
+ "Unsupported AE %.08x.\n", mbcp->mbox_out[0]);
/* Clear the MPI firmware status. */
}
end:
@@ -505,8 +582,8 @@ static int ql_mailbox_command(struct ql_adapter *qdev, struct mbox_params *mbcp)
goto done;
} while (time_before(jiffies, count));
- QPRINTK(qdev, DRV, ERR,
- "Timed out waiting for mailbox complete.\n");
+ netif_err(qdev, drv, qdev->ndev,
+ "Timed out waiting for mailbox complete.\n");
status = -ETIMEDOUT;
goto end;
@@ -529,6 +606,22 @@ end:
return status;
}
+int ql_mb_sys_err(struct ql_adapter *qdev)
+{
+ struct mbox_params mbc;
+ struct mbox_params *mbcp = &mbc;
+ int status;
+
+ memset(mbcp, 0, sizeof(struct mbox_params));
+
+ mbcp->in_count = 1;
+ mbcp->out_count = 0;
+
+ mbcp->mbox_in[0] = MB_CMD_MAKE_SYS_ERR;
+
+ status = ql_mailbox_command(qdev, mbcp);
+ return status;
+}
/* Get MPI firmware version. This will be used for
* driver banner and for ethtool info.
@@ -552,8 +645,8 @@ int ql_mb_about_fw(struct ql_adapter *qdev)
return status;
if (mbcp->mbox_out[0] != MB_CMD_STS_GOOD) {
- QPRINTK(qdev, DRV, ERR,
- "Failed about firmware command\n");
+ netif_err(qdev, drv, qdev->ndev,
+ "Failed about firmware command\n");
status = -EIO;
}
@@ -584,8 +677,8 @@ int ql_mb_get_fw_state(struct ql_adapter *qdev)
return status;
if (mbcp->mbox_out[0] != MB_CMD_STS_GOOD) {
- QPRINTK(qdev, DRV, ERR,
- "Failed Get Firmware State.\n");
+ netif_err(qdev, drv, qdev->ndev,
+ "Failed Get Firmware State.\n");
status = -EIO;
}
@@ -594,8 +687,8 @@ int ql_mb_get_fw_state(struct ql_adapter *qdev)
* happen.
*/
if (mbcp->mbox_out[1] & 1) {
- QPRINTK(qdev, DRV, ERR,
- "Firmware waiting for initialization.\n");
+ netif_err(qdev, drv, qdev->ndev,
+ "Firmware waiting for initialization.\n");
status = -EIO;
}
@@ -627,8 +720,7 @@ int ql_mb_idc_ack(struct ql_adapter *qdev)
return status;
if (mbcp->mbox_out[0] != MB_CMD_STS_GOOD) {
- QPRINTK(qdev, DRV, ERR,
- "Failed IDC ACK send.\n");
+ netif_err(qdev, drv, qdev->ndev, "Failed IDC ACK send.\n");
status = -EIO;
}
return status;
@@ -659,16 +751,72 @@ int ql_mb_set_port_cfg(struct ql_adapter *qdev)
return status;
if (mbcp->mbox_out[0] == MB_CMD_STS_INTRMDT) {
- QPRINTK(qdev, DRV, ERR,
- "Port Config sent, wait for IDC.\n");
+ netif_err(qdev, drv, qdev->ndev,
+ "Port Config sent, wait for IDC.\n");
} else if (mbcp->mbox_out[0] != MB_CMD_STS_GOOD) {
- QPRINTK(qdev, DRV, ERR,
- "Failed Set Port Configuration.\n");
+ netif_err(qdev, drv, qdev->ndev,
+ "Failed Set Port Configuration.\n");
status = -EIO;
}
return status;
}
+int ql_mb_dump_ram(struct ql_adapter *qdev, u64 req_dma, u32 addr,
+ u32 size)
+{
+ int status = 0;
+ struct mbox_params mbc;
+ struct mbox_params *mbcp = &mbc;
+
+ memset(mbcp, 0, sizeof(struct mbox_params));
+
+ mbcp->in_count = 9;
+ mbcp->out_count = 1;
+
+ mbcp->mbox_in[0] = MB_CMD_DUMP_RISC_RAM;
+ mbcp->mbox_in[1] = LSW(addr);
+ mbcp->mbox_in[2] = MSW(req_dma);
+ mbcp->mbox_in[3] = LSW(req_dma);
+ mbcp->mbox_in[4] = MSW(size);
+ mbcp->mbox_in[5] = LSW(size);
+ mbcp->mbox_in[6] = MSW(MSD(req_dma));
+ mbcp->mbox_in[7] = LSW(MSD(req_dma));
+ mbcp->mbox_in[8] = MSW(addr);
+
+
+ status = ql_mailbox_command(qdev, mbcp);
+ if (status)
+ return status;
+
+ if (mbcp->mbox_out[0] != MB_CMD_STS_GOOD) {
+ netif_err(qdev, drv, qdev->ndev, "Failed to dump risc RAM.\n");
+ status = -EIO;
+ }
+ return status;
+}
+
+/* Issue a mailbox command to dump RISC RAM. */
+int ql_dump_risc_ram_area(struct ql_adapter *qdev, void *buf,
+ u32 ram_addr, int word_count)
+{
+ int status;
+ char *my_buf;
+ dma_addr_t buf_dma;
+
+ my_buf = pci_alloc_consistent(qdev->pdev, word_count * sizeof(u32),
+ &buf_dma);
+ if (!my_buf)
+ return -EIO;
+
+ status = ql_mb_dump_ram(qdev, buf_dma, ram_addr, word_count);
+ if (!status)
+ memcpy(buf, my_buf, word_count * sizeof(u32));
+
+ pci_free_consistent(qdev->pdev, word_count * sizeof(u32), my_buf,
+ buf_dma);
+ return status;
+}
+
/* Get link settings and maximum frame size settings
* for the current port.
* Most likely will block.
@@ -691,12 +839,12 @@ int ql_mb_get_port_cfg(struct ql_adapter *qdev)
return status;
if (mbcp->mbox_out[0] != MB_CMD_STS_GOOD) {
- QPRINTK(qdev, DRV, ERR,
- "Failed Get Port Configuration.\n");
+ netif_err(qdev, drv, qdev->ndev,
+ "Failed Get Port Configuration.\n");
status = -EIO;
} else {
- QPRINTK(qdev, DRV, DEBUG,
- "Passed Get Port Configuration.\n");
+ netif_printk(qdev, drv, KERN_DEBUG, qdev->ndev,
+ "Passed Get Port Configuration.\n");
qdev->link_config = mbcp->mbox_out[1];
qdev->max_frame_size = mbcp->mbox_out[2];
}
@@ -723,8 +871,7 @@ int ql_mb_wol_mode(struct ql_adapter *qdev, u32 wol)
return status;
if (mbcp->mbox_out[0] != MB_CMD_STS_GOOD) {
- QPRINTK(qdev, DRV, ERR,
- "Failed to set WOL mode.\n");
+ netif_err(qdev, drv, qdev->ndev, "Failed to set WOL mode.\n");
status = -EIO;
}
return status;
@@ -766,8 +913,7 @@ int ql_mb_wol_set_magic(struct ql_adapter *qdev, u32 enable_wol)
return status;
if (mbcp->mbox_out[0] != MB_CMD_STS_GOOD) {
- QPRINTK(qdev, DRV, ERR,
- "Failed to set WOL mode.\n");
+ netif_err(qdev, drv, qdev->ndev, "Failed to set WOL mode.\n");
status = -EIO;
}
return status;
@@ -793,8 +939,7 @@ static int ql_idc_wait(struct ql_adapter *qdev)
wait_for_completion_timeout(&qdev->ide_completion,
wait_time);
if (!wait_time) {
- QPRINTK(qdev, DRV, ERR,
- "IDC Timeout.\n");
+ netif_err(qdev, drv, qdev->ndev, "IDC Timeout.\n");
break;
}
/* Now examine the response from the IDC process.
@@ -802,18 +947,17 @@ static int ql_idc_wait(struct ql_adapter *qdev)
* more wait time.
*/
if (mbcp->mbox_out[0] == AEN_IDC_EXT) {
- QPRINTK(qdev, DRV, ERR,
- "IDC Time Extension from function.\n");
+ netif_err(qdev, drv, qdev->ndev,
+ "IDC Time Extension from function.\n");
wait_time += (mbcp->mbox_out[1] >> 8) & 0x0000000f;
} else if (mbcp->mbox_out[0] == AEN_IDC_CMPLT) {
- QPRINTK(qdev, DRV, ERR,
- "IDC Success.\n");
+ netif_err(qdev, drv, qdev->ndev, "IDC Success.\n");
status = 0;
break;
} else {
- QPRINTK(qdev, DRV, ERR,
- "IDC: Invalid State 0x%.04x.\n",
- mbcp->mbox_out[0]);
+ netif_err(qdev, drv, qdev->ndev,
+ "IDC: Invalid State 0x%.04x.\n",
+ mbcp->mbox_out[0]);
status = -EIO;
break;
}
@@ -842,8 +986,8 @@ int ql_mb_set_led_cfg(struct ql_adapter *qdev, u32 led_config)
return status;
if (mbcp->mbox_out[0] != MB_CMD_STS_GOOD) {
- QPRINTK(qdev, DRV, ERR,
- "Failed to set LED Configuration.\n");
+ netif_err(qdev, drv, qdev->ndev,
+ "Failed to set LED Configuration.\n");
status = -EIO;
}
@@ -868,8 +1012,8 @@ int ql_mb_get_led_cfg(struct ql_adapter *qdev)
return status;
if (mbcp->mbox_out[0] != MB_CMD_STS_GOOD) {
- QPRINTK(qdev, DRV, ERR,
- "Failed to get LED Configuration.\n");
+ netif_err(qdev, drv, qdev->ndev,
+ "Failed to get LED Configuration.\n");
status = -EIO;
} else
qdev->led_config = mbcp->mbox_out[1];
@@ -899,16 +1043,16 @@ int ql_mb_set_mgmnt_traffic_ctl(struct ql_adapter *qdev, u32 control)
return status;
if (mbcp->mbox_out[0] == MB_CMD_STS_INVLD_CMD) {
- QPRINTK(qdev, DRV, ERR,
- "Command not supported by firmware.\n");
+ netif_err(qdev, drv, qdev->ndev,
+ "Command not supported by firmware.\n");
status = -EINVAL;
} else if (mbcp->mbox_out[0] == MB_CMD_STS_ERR) {
/* This indicates that the firmware is
* already in the state we are trying to
* change it to.
*/
- QPRINTK(qdev, DRV, ERR,
- "Command parameters make no change.\n");
+ netif_err(qdev, drv, qdev->ndev,
+ "Command parameters make no change.\n");
}
return status;
}
@@ -938,12 +1082,12 @@ static int ql_mb_get_mgmnt_traffic_ctl(struct ql_adapter *qdev, u32 *control)
}
if (mbcp->mbox_out[0] == MB_CMD_STS_INVLD_CMD) {
- QPRINTK(qdev, DRV, ERR,
- "Command not supported by firmware.\n");
+ netif_err(qdev, drv, qdev->ndev,
+ "Command not supported by firmware.\n");
status = -EINVAL;
} else if (mbcp->mbox_out[0] == MB_CMD_STS_ERR) {
- QPRINTK(qdev, DRV, ERR,
- "Failed to get MPI traffic control.\n");
+ netif_err(qdev, drv, qdev->ndev,
+ "Failed to get MPI traffic control.\n");
status = -EIO;
}
return status;
@@ -999,8 +1143,8 @@ void ql_mpi_port_cfg_work(struct work_struct *work)
status = ql_mb_get_port_cfg(qdev);
rtnl_unlock();
if (status) {
- QPRINTK(qdev, DRV, ERR,
- "Bug: Failed to get port config data.\n");
+ netif_err(qdev, drv, qdev->ndev,
+ "Bug: Failed to get port config data.\n");
goto err;
}
@@ -1013,8 +1157,8 @@ void ql_mpi_port_cfg_work(struct work_struct *work)
qdev->max_frame_size = CFG_DEFAULT_MAX_FRAME_SIZE;
status = ql_set_port_cfg(qdev);
if (status) {
- QPRINTK(qdev, DRV, ERR,
- "Bug: Failed to set port config data.\n");
+ netif_err(qdev, drv, qdev->ndev,
+ "Bug: Failed to set port config data.\n");
goto err;
}
end:
@@ -1046,8 +1190,8 @@ void ql_mpi_idc_work(struct work_struct *work)
switch (aen) {
default:
- QPRINTK(qdev, DRV, ERR,
- "Bug: Unhandled IDC action.\n");
+ netif_err(qdev, drv, qdev->ndev,
+ "Bug: Unhandled IDC action.\n");
break;
case MB_CMD_PORT_RESET:
case MB_CMD_STOP_FW:
@@ -1062,11 +1206,11 @@ void ql_mpi_idc_work(struct work_struct *work)
if (timeout) {
status = ql_mb_idc_ack(qdev);
if (status)
- QPRINTK(qdev, DRV, ERR,
- "Bug: No pending IDC!\n");
+ netif_err(qdev, drv, qdev->ndev,
+ "Bug: No pending IDC!\n");
} else {
- QPRINTK(qdev, DRV, DEBUG,
- "IDC ACK not required\n");
+ netif_printk(qdev, drv, KERN_DEBUG, qdev->ndev,
+ "IDC ACK not required\n");
status = 0; /* success */
}
break;
@@ -1095,11 +1239,11 @@ void ql_mpi_idc_work(struct work_struct *work)
if (timeout) {
status = ql_mb_idc_ack(qdev);
if (status)
- QPRINTK(qdev, DRV, ERR,
- "Bug: No pending IDC!\n");
+ netif_err(qdev, drv, qdev->ndev,
+ "Bug: No pending IDC!\n");
} else {
- QPRINTK(qdev, DRV, DEBUG,
- "IDC ACK not required\n");
+ netif_printk(qdev, drv, KERN_DEBUG, qdev->ndev,
+ "IDC ACK not required\n");
status = 0; /* success */
}
break;
@@ -1143,5 +1287,19 @@ void ql_mpi_reset_work(struct work_struct *work)
cancel_delayed_work_sync(&qdev->mpi_work);
cancel_delayed_work_sync(&qdev->mpi_port_cfg_work);
cancel_delayed_work_sync(&qdev->mpi_idc_work);
+ /* If we're not the dominant NIC function,
+ * then there is nothing to do.
+ */
+ if (!ql_own_firmware(qdev)) {
+ netif_err(qdev, drv, qdev->ndev, "Don't own firmware!\n");
+ return;
+ }
+
+ if (!ql_core_dump(qdev, qdev->mpi_coredump)) {
+ netif_err(qdev, drv, qdev->ndev, "Core is dumped!\n");
+ qdev->core_is_dumped = 1;
+ queue_delayed_work(qdev->workqueue,
+ &qdev->mpi_core_to_log, 5 * HZ);
+ }
ql_soft_reset_mpi_risc(qdev);
}
generated by cgit v1.2.3 (git 2.39.0) at 2024-11-06 09:26:45 +0300