diff options
Diffstat (limited to 'drivers/net/phy')
| -rw-r--r-- | drivers/net/phy/phy.c | 16 | ||||
| -rw-r--r-- | drivers/net/phy/smsc.c | 31 |
2 files changed, 31 insertions, 16 deletions
diff --git a/drivers/net/phy/phy.c b/drivers/net/phy/phy.c index b2197b506acb..1e1fbb049ec6 100644 --- a/drivers/net/phy/phy.c +++ b/drivers/net/phy/phy.c @@ -811,6 +811,7 @@ void phy_state_machine(struct work_struct *work) bool needs_aneg = false, do_suspend = false; enum phy_state old_state; int err = 0; + int old_link; mutex_lock(&phydev->lock); @@ -896,11 +897,18 @@ void phy_state_machine(struct work_struct *work) phydev->adjust_link(phydev->attached_dev); break; case PHY_RUNNING: - /* Only register a CHANGE if we are - * polling or ignoring interrupts + /* Only register a CHANGE if we are polling or ignoring + * interrupts and link changed since latest checking. */ - if (!phy_interrupt_is_valid(phydev)) - phydev->state = PHY_CHANGELINK; + if (!phy_interrupt_is_valid(phydev)) { + old_link = phydev->link; + err = phy_read_status(phydev); + if (err) + break; + + if (old_link != phydev->link) + phydev->state = PHY_CHANGELINK; + } break; case PHY_CHANGELINK: err = phy_read_status(phydev); diff --git a/drivers/net/phy/smsc.c b/drivers/net/phy/smsc.c index c0f6479e19d4..70b08958763a 100644 --- a/drivers/net/phy/smsc.c +++ b/drivers/net/phy/smsc.c @@ -91,19 +91,18 @@ static int lan911x_config_init(struct phy_device *phydev) } /* - * The LAN8710/LAN8720 requires a minimum of 2 link pulses within 64ms of each - * other in order to set the ENERGYON bit and exit EDPD mode. If a link partner - * does send the pulses within this interval, the PHY will remained powered - * down. - * - * This workaround will manually toggle the PHY on/off upon calls to read_status - * in order to generate link test pulses if the link is down. If a link partner - * is present, it will respond to the pulses, which will cause the ENERGYON bit - * to be set and will cause the EDPD mode to be exited. + * The LAN87xx suffers from rare absence of the ENERGYON-bit when Ethernet cable + * plugs in while LAN87xx is in Energy Detect Power-Down mode. This leads to + * unstable detection of plugging in Ethernet cable. + * This workaround disables Energy Detect Power-Down mode and waiting for + * response on link pulses to detect presence of plugged Ethernet cable. + * The Energy Detect Power-Down mode is enabled again in the end of procedure to + * save approximately 220 mW of power if cable is unplugged. */ static int lan87xx_read_status(struct phy_device *phydev) { int err = genphy_read_status(phydev); + int i; if (!phydev->link) { /* Disable EDPD to wake up PHY */ @@ -116,8 +115,16 @@ static int lan87xx_read_status(struct phy_device *phydev) if (rc < 0) return rc; - /* Sleep 64 ms to allow ~5 link test pulses to be sent */ - msleep(64); + /* Wait max 640 ms to detect energy */ + for (i = 0; i < 64; i++) { + /* Sleep to allow link test pulses to be sent */ + msleep(10); + rc = phy_read(phydev, MII_LAN83C185_CTRL_STATUS); + if (rc < 0) + return rc; + if (rc & MII_LAN83C185_ENERGYON) + break; + } /* Re-enable EDPD */ rc = phy_read(phydev, MII_LAN83C185_CTRL_STATUS); @@ -191,7 +198,7 @@ static struct phy_driver smsc_phy_driver[] = { /* basic functions */ .config_aneg = genphy_config_aneg, - .read_status = genphy_read_status, + .read_status = lan87xx_read_status, .config_init = smsc_phy_config_init, .soft_reset = smsc_phy_reset, |