diff options
Diffstat (limited to 'drivers/net/ethernet/broadcom')
| -rw-r--r-- | drivers/net/ethernet/broadcom/Kconfig | 4 | ||||
| -rw-r--r-- | drivers/net/ethernet/broadcom/genet/bcmgenet.c | 41 | ||||
| -rw-r--r-- | drivers/net/ethernet/broadcom/genet/bcmgenet.h | 3 | ||||
| -rw-r--r-- | drivers/net/ethernet/broadcom/genet/bcmmii.c | 117 |
4 files changed, 87 insertions, 78 deletions
diff --git a/drivers/net/ethernet/broadcom/Kconfig b/drivers/net/ethernet/broadcom/Kconfig index e24f5d2b6afe..53055ce5dfd6 100644 --- a/drivers/net/ethernet/broadcom/Kconfig +++ b/drivers/net/ethernet/broadcom/Kconfig @@ -8,7 +8,6 @@ config NET_VENDOR_BROADCOM default y depends on (SSB_POSSIBLE && HAS_DMA) || PCI || BCM63XX || \ SIBYTE_SB1xxx_SOC - select DIMLIB ---help--- If you have a network (Ethernet) chipset belonging to this class, say Y. @@ -69,6 +68,7 @@ config BCMGENET select FIXED_PHY select BCM7XXX_PHY select MDIO_BCM_UNIMAC + select DIMLIB help This driver supports the built-in Ethernet MACs found in the Broadcom BCM7xxx Set Top Box family chipset. @@ -188,6 +188,7 @@ config SYSTEMPORT select MII select PHYLIB select FIXED_PHY + select DIMLIB help This driver supports the built-in Ethernet MACs found in the Broadcom BCM7xxx Set Top Box family chipset using an internal @@ -200,6 +201,7 @@ config BNXT select LIBCRC32C select NET_DEVLINK select PAGE_POOL + select DIMLIB ---help--- This driver supports Broadcom NetXtreme-C/E 10/25/40/50 gigabit Ethernet cards. To compile this driver as a module, choose M here: diff --git a/drivers/net/ethernet/broadcom/genet/bcmgenet.c b/drivers/net/ethernet/broadcom/genet/bcmgenet.c index 12cb77ef1081..0f138280315a 100644 --- a/drivers/net/ethernet/broadcom/genet/bcmgenet.c +++ b/drivers/net/ethernet/broadcom/genet/bcmgenet.c @@ -2018,6 +2018,8 @@ static void bcmgenet_link_intr_enable(struct bcmgenet_priv *priv) */ if (priv->internal_phy) { int0_enable |= UMAC_IRQ_LINK_EVENT; + if (GENET_IS_V1(priv) || GENET_IS_V2(priv) || GENET_IS_V3(priv)) + int0_enable |= UMAC_IRQ_PHY_DET_R; } else if (priv->ext_phy) { int0_enable |= UMAC_IRQ_LINK_EVENT; } else if (priv->phy_interface == PHY_INTERFACE_MODE_MOCA) { @@ -2611,11 +2613,14 @@ static void bcmgenet_irq_task(struct work_struct *work) priv->irq0_stat = 0; spin_unlock_irq(&priv->lock); + if (status & UMAC_IRQ_PHY_DET_R && + priv->dev->phydev->autoneg != AUTONEG_ENABLE) + phy_init_hw(priv->dev->phydev); + /* Link UP/DOWN event */ - if (status & UMAC_IRQ_LINK_EVENT) { - priv->dev->phydev->link = !!(status & UMAC_IRQ_LINK_UP); + if (status & UMAC_IRQ_LINK_EVENT) phy_mac_interrupt(priv->dev->phydev); - } + } /* bcmgenet_isr1: handle Rx and Tx priority queues */ @@ -2710,7 +2715,7 @@ static irqreturn_t bcmgenet_isr0(int irq, void *dev_id) } /* all other interested interrupts handled in bottom half */ - status &= UMAC_IRQ_LINK_EVENT; + status &= (UMAC_IRQ_LINK_EVENT | UMAC_IRQ_PHY_DET_R); if (status) { /* Save irq status for bottom-half processing. */ spin_lock_irqsave(&priv->lock, flags); @@ -2874,6 +2879,12 @@ static int bcmgenet_open(struct net_device *dev) if (priv->internal_phy) bcmgenet_power_up(priv, GENET_POWER_PASSIVE); + ret = bcmgenet_mii_connect(dev); + if (ret) { + netdev_err(dev, "failed to connect to PHY\n"); + goto err_clk_disable; + } + /* take MAC out of reset */ bcmgenet_umac_reset(priv); @@ -2883,6 +2894,12 @@ static int bcmgenet_open(struct net_device *dev) reg = bcmgenet_umac_readl(priv, UMAC_CMD); priv->crc_fwd_en = !!(reg & CMD_CRC_FWD); + ret = bcmgenet_mii_config(dev, true); + if (ret) { + netdev_err(dev, "unsupported PHY\n"); + goto err_disconnect_phy; + } + bcmgenet_set_hw_addr(priv, dev->dev_addr); if (priv->internal_phy) { @@ -2898,7 +2915,7 @@ static int bcmgenet_open(struct net_device *dev) ret = bcmgenet_init_dma(priv); if (ret) { netdev_err(dev, "failed to initialize DMA\n"); - goto err_clk_disable; + goto err_disconnect_phy; } /* Always enable ring 16 - descriptor ring */ @@ -2921,25 +2938,19 @@ static int bcmgenet_open(struct net_device *dev) goto err_irq0; } - ret = bcmgenet_mii_probe(dev); - if (ret) { - netdev_err(dev, "failed to connect to PHY\n"); - goto err_irq1; - } - bcmgenet_netif_start(dev); netif_tx_start_all_queues(dev); return 0; -err_irq1: - free_irq(priv->irq1, priv); err_irq0: free_irq(priv->irq0, priv); err_fini_dma: bcmgenet_dma_teardown(priv); bcmgenet_fini_dma(priv); +err_disconnect_phy: + phy_disconnect(dev->phydev); err_clk_disable: if (priv->internal_phy) bcmgenet_power_down(priv, GENET_POWER_PASSIVE); @@ -3620,6 +3631,8 @@ static int bcmgenet_resume(struct device *d) if (priv->internal_phy) bcmgenet_power_up(priv, GENET_POWER_PASSIVE); + phy_init_hw(dev->phydev); + bcmgenet_umac_reset(priv); init_umac(priv); @@ -3628,8 +3641,6 @@ static int bcmgenet_resume(struct device *d) if (priv->wolopts) clk_disable_unprepare(priv->clk_wol); - phy_init_hw(dev->phydev); - /* Speed settings must be restored */ bcmgenet_mii_config(priv->dev, false); diff --git a/drivers/net/ethernet/broadcom/genet/bcmgenet.h b/drivers/net/ethernet/broadcom/genet/bcmgenet.h index 4a8fc03d82fd..7fbf573d8d52 100644 --- a/drivers/net/ethernet/broadcom/genet/bcmgenet.h +++ b/drivers/net/ethernet/broadcom/genet/bcmgenet.h @@ -366,6 +366,7 @@ struct bcmgenet_mib_counters { #define EXT_PWR_DOWN_PHY_EN (1 << 20) #define EXT_RGMII_OOB_CTRL 0x0C +#define RGMII_MODE_EN_V123 (1 << 0) #define RGMII_LINK (1 << 4) #define OOB_DISABLE (1 << 5) #define RGMII_MODE_EN (1 << 6) @@ -719,8 +720,8 @@ GENET_IO_MACRO(rbuf, GENET_RBUF_OFF); /* MDIO routines */ int bcmgenet_mii_init(struct net_device *dev); +int bcmgenet_mii_connect(struct net_device *dev); int bcmgenet_mii_config(struct net_device *dev, bool init); -int bcmgenet_mii_probe(struct net_device *dev); void bcmgenet_mii_exit(struct net_device *dev); void bcmgenet_phy_power_set(struct net_device *dev, bool enable); void bcmgenet_mii_setup(struct net_device *dev); diff --git a/drivers/net/ethernet/broadcom/genet/bcmmii.c b/drivers/net/ethernet/broadcom/genet/bcmmii.c index 970e478a9017..17bb8d60a157 100644 --- a/drivers/net/ethernet/broadcom/genet/bcmmii.c +++ b/drivers/net/ethernet/broadcom/genet/bcmmii.c @@ -173,6 +173,46 @@ static void bcmgenet_moca_phy_setup(struct bcmgenet_priv *priv) bcmgenet_fixed_phy_link_update); } +int bcmgenet_mii_connect(struct net_device *dev) +{ + struct bcmgenet_priv *priv = netdev_priv(dev); + struct device_node *dn = priv->pdev->dev.of_node; + struct phy_device *phydev; + u32 phy_flags = 0; + int ret; + + /* Communicate the integrated PHY revision */ + if (priv->internal_phy) + phy_flags = priv->gphy_rev; + + /* Initialize link state variables that bcmgenet_mii_setup() uses */ + priv->old_link = -1; + priv->old_speed = -1; + priv->old_duplex = -1; + priv->old_pause = -1; + + if (dn) { + phydev = of_phy_connect(dev, priv->phy_dn, bcmgenet_mii_setup, + phy_flags, priv->phy_interface); + if (!phydev) { + pr_err("could not attach to PHY\n"); + return -ENODEV; + } + } else { + phydev = dev->phydev; + phydev->dev_flags = phy_flags; + + ret = phy_connect_direct(dev, phydev, bcmgenet_mii_setup, + priv->phy_interface); + if (ret) { + pr_err("could not attach to PHY\n"); + return -ENODEV; + } + } + + return 0; +} + int bcmgenet_mii_config(struct net_device *dev, bool init) { struct bcmgenet_priv *priv = netdev_priv(dev); @@ -258,74 +298,29 @@ int bcmgenet_mii_config(struct net_device *dev, bool init) */ if (priv->ext_phy) { reg = bcmgenet_ext_readl(priv, EXT_RGMII_OOB_CTRL); - reg |= RGMII_MODE_EN | id_mode_dis; + reg |= id_mode_dis; + if (GENET_IS_V1(priv) || GENET_IS_V2(priv) || GENET_IS_V3(priv)) + reg |= RGMII_MODE_EN_V123; + else + reg |= RGMII_MODE_EN; bcmgenet_ext_writel(priv, reg, EXT_RGMII_OOB_CTRL); } - if (init) - dev_info(kdev, "configuring instance for %s\n", phy_name); - - return 0; -} - -int bcmgenet_mii_probe(struct net_device *dev) -{ - struct bcmgenet_priv *priv = netdev_priv(dev); - struct device_node *dn = priv->pdev->dev.of_node; - struct phy_device *phydev; - u32 phy_flags; - int ret; - - /* Communicate the integrated PHY revision */ - phy_flags = priv->gphy_rev; - - /* Initialize link state variables that bcmgenet_mii_setup() uses */ - priv->old_link = -1; - priv->old_speed = -1; - priv->old_duplex = -1; - priv->old_pause = -1; - - if (dn) { - phydev = of_phy_connect(dev, priv->phy_dn, bcmgenet_mii_setup, - phy_flags, priv->phy_interface); - if (!phydev) { - pr_err("could not attach to PHY\n"); - return -ENODEV; - } - } else { - phydev = dev->phydev; - phydev->dev_flags = phy_flags; + if (init) { + linkmode_copy(phydev->advertising, phydev->supported); - ret = phy_connect_direct(dev, phydev, bcmgenet_mii_setup, - priv->phy_interface); - if (ret) { - pr_err("could not attach to PHY\n"); - return -ENODEV; - } - } + /* The internal PHY has its link interrupts routed to the + * Ethernet MAC ISRs. On GENETv5 there is a hardware issue + * that prevents the signaling of link UP interrupts when + * the link operates at 10Mbps, so fallback to polling for + * those versions of GENET. + */ + if (priv->internal_phy && !GENET_IS_V5(priv)) + phydev->irq = PHY_IGNORE_INTERRUPT; - /* Configure port multiplexer based on what the probed PHY device since - * reading the 'max-speed' property determines the maximum supported - * PHY speed which is needed for bcmgenet_mii_config() to configure - * things appropriately. - */ - ret = bcmgenet_mii_config(dev, true); - if (ret) { - phy_disconnect(dev->phydev); - return ret; + dev_info(kdev, "configuring instance for %s\n", phy_name); } - linkmode_copy(phydev->advertising, phydev->supported); - - /* The internal PHY has its link interrupts routed to the - * Ethernet MAC ISRs. On GENETv5 there is a hardware issue - * that prevents the signaling of link UP interrupts when - * the link operates at 10Mbps, so fallback to polling for - * those versions of GENET. - */ - if (priv->internal_phy && !GENET_IS_V5(priv)) - dev->phydev->irq = PHY_IGNORE_INTERRUPT; - return 0; } |