summaryrefslogtreecommitdiff
path: root/drivers/misc/eeprom
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/misc/eeprom')
-rw-r--r--drivers/misc/eeprom/Kconfig4
-rw-r--r--drivers/misc/eeprom/at24.c14
-rw-r--r--drivers/misc/eeprom/digsy_mtc_eeprom.c2
-rw-r--r--drivers/misc/eeprom/ee1004.c4
-rw-r--r--drivers/misc/eeprom/eeprom_93cx6.c15
-rw-r--r--drivers/misc/eeprom/eeprom_93xx46.c2
-rw-r--r--drivers/misc/eeprom/idt_89hpesx.c81
-rw-r--r--drivers/misc/eeprom/max6875.c4
8 files changed, 36 insertions, 90 deletions
diff --git a/drivers/misc/eeprom/Kconfig b/drivers/misc/eeprom/Kconfig
index 9df12399bda3..cb1c4b8e7fd3 100644
--- a/drivers/misc/eeprom/Kconfig
+++ b/drivers/misc/eeprom/Kconfig
@@ -97,11 +97,11 @@ config EEPROM_DIGSY_MTC_CFG
If unsure, say N.
config EEPROM_IDT_89HPESX
- tristate "IDT 89HPESx PCIe-swtiches EEPROM / CSR support"
+ tristate "IDT 89HPESx PCIe-switches EEPROM / CSR support"
depends on I2C && SYSFS
help
Enable this driver to get read/write access to EEPROM / CSRs
- over IDT PCIe-swtich i2c-slave interface.
+ over IDT PCIe-switch i2c-slave interface.
This driver can also be built as a module. If so, the module
will be called idt_89hpesx.
diff --git a/drivers/misc/eeprom/at24.c b/drivers/misc/eeprom/at24.c
index ca872e3465ed..f721825199ce 100644
--- a/drivers/misc/eeprom/at24.c
+++ b/drivers/misc/eeprom/at24.c
@@ -18,8 +18,6 @@
#include <linux/module.h>
#include <linux/mutex.h>
#include <linux/nvmem-provider.h>
-#include <linux/of.h>
-#include <linux/of_device.h>
#include <linux/pm_runtime.h>
#include <linux/property.h>
#include <linux/regmap.h>
@@ -207,6 +205,8 @@ AT24_CHIP_DATA(at24_data_24cs64, 16,
AT24_FLAG_ADDR16 | AT24_FLAG_SERIAL | AT24_FLAG_READONLY);
AT24_CHIP_DATA(at24_data_24c128, 131072 / 8, AT24_FLAG_ADDR16);
AT24_CHIP_DATA(at24_data_24c256, 262144 / 8, AT24_FLAG_ADDR16);
+/* M24256E Additional Write lockable page (M24256E-F order codes) */
+AT24_CHIP_DATA(at24_data_24256e_wlp, 64, AT24_FLAG_ADDR16);
AT24_CHIP_DATA(at24_data_24c512, 524288 / 8, AT24_FLAG_ADDR16);
AT24_CHIP_DATA(at24_data_24c1024, 1048576 / 8, AT24_FLAG_ADDR16);
AT24_CHIP_DATA_BS(at24_data_24c1025, 1048576 / 8, AT24_FLAG_ADDR16, 2);
@@ -240,6 +240,7 @@ static const struct i2c_device_id at24_ids[] = {
{ "24cs64", (kernel_ulong_t)&at24_data_24cs64 },
{ "24c128", (kernel_ulong_t)&at24_data_24c128 },
{ "24c256", (kernel_ulong_t)&at24_data_24c256 },
+ { "24256e-wl", (kernel_ulong_t)&at24_data_24256e_wlp },
{ "24c512", (kernel_ulong_t)&at24_data_24c512 },
{ "24c1024", (kernel_ulong_t)&at24_data_24c1024 },
{ "24c1025", (kernel_ulong_t)&at24_data_24c1025 },
@@ -249,7 +250,7 @@ static const struct i2c_device_id at24_ids[] = {
};
MODULE_DEVICE_TABLE(i2c, at24_ids);
-static const struct of_device_id __maybe_unused at24_of_match[] = {
+static const struct of_device_id at24_of_match[] = {
{ .compatible = "atmel,24c00", .data = &at24_data_24c00 },
{ .compatible = "atmel,24c01", .data = &at24_data_24c01 },
{ .compatible = "atmel,24cs01", .data = &at24_data_24cs01 },
@@ -278,11 +279,12 @@ static const struct of_device_id __maybe_unused at24_of_match[] = {
{ .compatible = "atmel,24c2048", .data = &at24_data_24c2048 },
{ .compatible = "microchip,24aa025e48", .data = &at24_data_24aa025e48 },
{ .compatible = "microchip,24aa025e64", .data = &at24_data_24aa025e64 },
+ { .compatible = "st,24256e-wl", .data = &at24_data_24256e_wlp },
{ /* END OF LIST */ },
};
MODULE_DEVICE_TABLE(of, at24_of_match);
-static const struct acpi_device_id __maybe_unused at24_acpi_ids[] = {
+static const struct acpi_device_id at24_acpi_ids[] = {
{ "INT3499", (kernel_ulong_t)&at24_data_INT3499 },
{ "TPF0001", (kernel_ulong_t)&at24_data_24c1024 },
{ /* END OF LIST */ }
@@ -844,8 +846,8 @@ static struct i2c_driver at24_driver = {
.driver = {
.name = "at24",
.pm = &at24_pm_ops,
- .of_match_table = of_match_ptr(at24_of_match),
- .acpi_match_table = ACPI_PTR(at24_acpi_ids),
+ .of_match_table = at24_of_match,
+ .acpi_match_table = at24_acpi_ids,
},
.probe = at24_probe,
.remove = at24_remove,
diff --git a/drivers/misc/eeprom/digsy_mtc_eeprom.c b/drivers/misc/eeprom/digsy_mtc_eeprom.c
index 88888485e6f8..ee58f7ce5bfa 100644
--- a/drivers/misc/eeprom/digsy_mtc_eeprom.c
+++ b/drivers/misc/eeprom/digsy_mtc_eeprom.c
@@ -50,7 +50,7 @@ static struct platform_device digsy_mtc_eeprom = {
};
static struct gpiod_lookup_table eeprom_spi_gpiod_table = {
- .dev_id = "spi_gpio",
+ .dev_id = "spi_gpio.1",
.table = {
GPIO_LOOKUP("gpio@b00", GPIO_EEPROM_CLK,
"sck", GPIO_ACTIVE_HIGH),
diff --git a/drivers/misc/eeprom/ee1004.c b/drivers/misc/eeprom/ee1004.c
index 89224d4af4a2..e13f9fdd9d7b 100644
--- a/drivers/misc/eeprom/ee1004.c
+++ b/drivers/misc/eeprom/ee1004.c
@@ -304,6 +304,10 @@ static int ee1004_probe(struct i2c_client *client)
I2C_FUNC_SMBUS_BYTE | I2C_FUNC_SMBUS_READ_BYTE_DATA))
return -EPFNOSUPPORT;
+ err = i2c_smbus_read_byte(client);
+ if (err < 0)
+ return -ENODEV;
+
mutex_lock(&ee1004_bus_lock);
err = ee1004_init_bus_data(client);
diff --git a/drivers/misc/eeprom/eeprom_93cx6.c b/drivers/misc/eeprom/eeprom_93cx6.c
index 9627294fe3e9..e6f0e0fc1ca2 100644
--- a/drivers/misc/eeprom/eeprom_93cx6.c
+++ b/drivers/misc/eeprom/eeprom_93cx6.c
@@ -8,6 +8,7 @@
* Supported chipsets: 93c46 & 93c66.
*/
+#include <linux/bits.h>
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/delay.h>
@@ -102,7 +103,7 @@ static void eeprom_93cx6_write_bits(struct eeprom_93cx6 *eeprom,
/*
* Check if this bit needs to be set.
*/
- eeprom->reg_data_in = !!(data & (1 << (i - 1)));
+ eeprom->reg_data_in = !!(data & BIT(i - 1));
/*
* Write the bit to the eeprom register.
@@ -152,7 +153,7 @@ static void eeprom_93cx6_read_bits(struct eeprom_93cx6 *eeprom,
* Read if the bit has been set.
*/
if (eeprom->reg_data_out)
- buf |= (1 << (i - 1));
+ buf |= BIT(i - 1);
eeprom_93cx6_pulse_low(eeprom);
}
@@ -186,6 +187,11 @@ void eeprom_93cx6_read(struct eeprom_93cx6 *eeprom, const u8 word,
eeprom_93cx6_write_bits(eeprom, command,
PCI_EEPROM_WIDTH_OPCODE + eeprom->width);
+ if (has_quirk_extra_read_cycle(eeprom)) {
+ eeprom_93cx6_pulse_high(eeprom);
+ eeprom_93cx6_pulse_low(eeprom);
+ }
+
/*
* Read the requested 16 bits.
*/
@@ -252,6 +258,11 @@ void eeprom_93cx6_readb(struct eeprom_93cx6 *eeprom, const u8 byte,
eeprom_93cx6_write_bits(eeprom, command,
PCI_EEPROM_WIDTH_OPCODE + eeprom->width + 1);
+ if (has_quirk_extra_read_cycle(eeprom)) {
+ eeprom_93cx6_pulse_high(eeprom);
+ eeprom_93cx6_pulse_low(eeprom);
+ }
+
/*
* Read the requested 8 bits.
*/
diff --git a/drivers/misc/eeprom/eeprom_93xx46.c b/drivers/misc/eeprom/eeprom_93xx46.c
index e2221be88445..9cae6f530679 100644
--- a/drivers/misc/eeprom/eeprom_93xx46.c
+++ b/drivers/misc/eeprom/eeprom_93xx46.c
@@ -229,7 +229,7 @@ static int eeprom_93xx46_ew(struct eeprom_93xx46_dev *edev, int is_on)
static ssize_t
eeprom_93xx46_write_word(struct eeprom_93xx46_dev *edev,
- const char *buf, unsigned off)
+ const char *buf, unsigned int off)
{
struct spi_message m;
struct spi_transfer t[2] = {};
diff --git a/drivers/misc/eeprom/idt_89hpesx.c b/drivers/misc/eeprom/idt_89hpesx.c
index 43421fe37d33..60c42170d147 100644
--- a/drivers/misc/eeprom/idt_89hpesx.c
+++ b/drivers/misc/eeprom/idt_89hpesx.c
@@ -61,11 +61,6 @@ MODULE_LICENSE("GPL v2");
MODULE_AUTHOR("T-platforms");
/*
- * csr_dbgdir - CSR read/write operations Debugfs directory
- */
-static struct dentry *csr_dbgdir;
-
-/*
* struct idt_89hpesx_dev - IDT 89HPESx device data structure
* @eesize: Size of EEPROM in bytes (calculated from "idt,eecompatible")
* @eero: EEPROM Read-only flag
@@ -847,7 +842,7 @@ err_mutex_unlock:
* @count: Number of bytes to write
*/
static ssize_t eeprom_write(struct file *filp, struct kobject *kobj,
- struct bin_attribute *attr,
+ const struct bin_attribute *attr,
char *buf, loff_t off, size_t count)
{
struct idt_89hpesx_dev *pdev;
@@ -871,7 +866,7 @@ static ssize_t eeprom_write(struct file *filp, struct kobject *kobj,
* @count: Number of bytes to write
*/
static ssize_t eeprom_read(struct file *filp, struct kobject *kobj,
- struct bin_attribute *attr,
+ const struct bin_attribute *attr,
char *buf, loff_t off, size_t count)
{
struct idt_89hpesx_dev *pdev;
@@ -1017,7 +1012,7 @@ static ssize_t idt_dbgfs_csr_read(struct file *filep, char __user *ubuf,
* NOTE Size will be changed in compliance with OF node. EEPROM attribute will
* be read-only as well if the corresponding flag is specified in OF node.
*/
-static BIN_ATTR_RW(eeprom, EEPROM_DEF_SIZE);
+static const BIN_ATTR_RW(eeprom, EEPROM_DEF_SIZE);
/*
* csr_dbgfs_ops - CSR debugfs-node read/write operations
@@ -1325,35 +1320,6 @@ static void idt_remove_sysfs_files(struct idt_89hpesx_dev *pdev)
}
/*
- * idt_create_dbgfs_files() - create debugfs files
- * @pdev: Pointer to the driver data
- */
-#define CSRNAME_LEN ((size_t)32)
-static void idt_create_dbgfs_files(struct idt_89hpesx_dev *pdev)
-{
- struct i2c_client *cli = pdev->client;
- char fname[CSRNAME_LEN];
-
- /* Create Debugfs directory for CSR file */
- snprintf(fname, CSRNAME_LEN, "%d-%04hx", cli->adapter->nr, cli->addr);
- pdev->csr_dir = debugfs_create_dir(fname, csr_dbgdir);
-
- /* Create Debugfs file for CSR read/write operations */
- debugfs_create_file(cli->name, 0600, pdev->csr_dir, pdev,
- &csr_dbgfs_ops);
-}
-
-/*
- * idt_remove_dbgfs_files() - remove debugfs files
- * @pdev: Pointer to the driver data
- */
-static void idt_remove_dbgfs_files(struct idt_89hpesx_dev *pdev)
-{
- /* Remove CSR directory and it sysfs-node */
- debugfs_remove_recursive(pdev->csr_dir);
-}
-
-/*
* idt_probe() - IDT 89HPESx driver probe() callback method
*/
static int idt_probe(struct i2c_client *client)
@@ -1382,7 +1348,7 @@ static int idt_probe(struct i2c_client *client)
goto err_free_pdev;
/* Create debugfs files */
- idt_create_dbgfs_files(pdev);
+ debugfs_create_file(pdev->client->name, 0600, client->debugfs, pdev, &csr_dbgfs_ops);
return 0;
@@ -1399,9 +1365,6 @@ static void idt_remove(struct i2c_client *client)
{
struct idt_89hpesx_dev *pdev = i2c_get_clientdata(client);
- /* Remove debugfs files first */
- idt_remove_dbgfs_files(pdev);
-
/* Remove sysfs files */
idt_remove_sysfs_files(pdev);
@@ -1550,38 +1513,4 @@ static struct i2c_driver idt_driver = {
.remove = idt_remove,
.id_table = idt_ids,
};
-
-/*
- * idt_init() - IDT 89HPESx driver init() callback method
- */
-static int __init idt_init(void)
-{
- int ret;
-
- /* Create Debugfs directory first */
- if (debugfs_initialized())
- csr_dbgdir = debugfs_create_dir("idt_csr", NULL);
-
- /* Add new i2c-device driver */
- ret = i2c_add_driver(&idt_driver);
- if (ret) {
- debugfs_remove_recursive(csr_dbgdir);
- return ret;
- }
-
- return 0;
-}
-module_init(idt_init);
-
-/*
- * idt_exit() - IDT 89HPESx driver exit() callback method
- */
-static void __exit idt_exit(void)
-{
- /* Discard debugfs directory and all files if any */
- debugfs_remove_recursive(csr_dbgdir);
-
- /* Unregister i2c-device driver */
- i2c_del_driver(&idt_driver);
-}
-module_exit(idt_exit);
+module_i2c_driver(idt_driver);
diff --git a/drivers/misc/eeprom/max6875.c b/drivers/misc/eeprom/max6875.c
index 6fab2ffa736b..1c36ad153e78 100644
--- a/drivers/misc/eeprom/max6875.c
+++ b/drivers/misc/eeprom/max6875.c
@@ -104,7 +104,7 @@ exit_up:
}
static ssize_t max6875_read(struct file *filp, struct kobject *kobj,
- struct bin_attribute *bin_attr,
+ const struct bin_attribute *bin_attr,
char *buf, loff_t off, size_t count)
{
struct i2c_client *client = kobj_to_i2c_client(kobj);
@@ -127,7 +127,7 @@ static const struct bin_attribute user_eeprom_attr = {
.mode = S_IRUGO,
},
.size = USER_EEPROM_SIZE,
- .read = max6875_read,
+ .read_new = max6875_read,
};
static int max6875_probe(struct i2c_client *client)