diff options
Diffstat (limited to 'drivers/mfd/wm831x-core.c')
-rw-r--r-- | drivers/mfd/wm831x-core.c | 259 |
1 files changed, 71 insertions, 188 deletions
diff --git a/drivers/mfd/wm831x-core.c b/drivers/mfd/wm831x-core.c index 265f75fc6a25..282e76ab678f 100644 --- a/drivers/mfd/wm831x-core.c +++ b/drivers/mfd/wm831x-core.c @@ -295,7 +295,7 @@ int wm831x_set_bits(struct wm831x *wm831x, unsigned short reg, goto out; r &= ~mask; - r |= val; + r |= val & mask; ret = wm831x_write(wm831x, reg, 2, &r); @@ -306,146 +306,6 @@ out: } EXPORT_SYMBOL_GPL(wm831x_set_bits); -/** - * wm831x_auxadc_read: Read a value from the WM831x AUXADC - * - * @wm831x: Device to read from. - * @input: AUXADC input to read. - */ -int wm831x_auxadc_read(struct wm831x *wm831x, enum wm831x_auxadc input) -{ - int ret, src, irq_masked, timeout; - - /* Are we using the interrupt? */ - irq_masked = wm831x_reg_read(wm831x, WM831X_INTERRUPT_STATUS_1_MASK); - irq_masked &= WM831X_AUXADC_DATA_EINT; - - mutex_lock(&wm831x->auxadc_lock); - - ret = wm831x_set_bits(wm831x, WM831X_AUXADC_CONTROL, - WM831X_AUX_ENA, WM831X_AUX_ENA); - if (ret < 0) { - dev_err(wm831x->dev, "Failed to enable AUXADC: %d\n", ret); - goto out; - } - - /* We force a single source at present */ - src = input; - ret = wm831x_reg_write(wm831x, WM831X_AUXADC_SOURCE, - 1 << src); - if (ret < 0) { - dev_err(wm831x->dev, "Failed to set AUXADC source: %d\n", ret); - goto out; - } - - /* Clear any notification from a very late arriving interrupt */ - try_wait_for_completion(&wm831x->auxadc_done); - - ret = wm831x_set_bits(wm831x, WM831X_AUXADC_CONTROL, - WM831X_AUX_CVT_ENA, WM831X_AUX_CVT_ENA); - if (ret < 0) { - dev_err(wm831x->dev, "Failed to start AUXADC: %d\n", ret); - goto disable; - } - - if (irq_masked) { - /* If we're not using interrupts then poll the - * interrupt status register */ - timeout = 5; - while (timeout) { - msleep(1); - - ret = wm831x_reg_read(wm831x, - WM831X_INTERRUPT_STATUS_1); - if (ret < 0) { - dev_err(wm831x->dev, - "ISR 1 read failed: %d\n", ret); - goto disable; - } - - /* Did it complete? */ - if (ret & WM831X_AUXADC_DATA_EINT) { - wm831x_reg_write(wm831x, - WM831X_INTERRUPT_STATUS_1, - WM831X_AUXADC_DATA_EINT); - break; - } else { - dev_err(wm831x->dev, - "AUXADC conversion timeout\n"); - ret = -EBUSY; - goto disable; - } - } - } else { - /* If we are using interrupts then wait for the - * interrupt to complete. Use an extremely long - * timeout to handle situations with heavy load where - * the notification of the interrupt may be delayed by - * threaded IRQ handling. */ - if (!wait_for_completion_timeout(&wm831x->auxadc_done, - msecs_to_jiffies(500))) { - dev_err(wm831x->dev, "Timed out waiting for AUXADC\n"); - ret = -EBUSY; - goto disable; - } - } - - ret = wm831x_reg_read(wm831x, WM831X_AUXADC_DATA); - if (ret < 0) { - dev_err(wm831x->dev, "Failed to read AUXADC data: %d\n", ret); - } else { - src = ((ret & WM831X_AUX_DATA_SRC_MASK) - >> WM831X_AUX_DATA_SRC_SHIFT) - 1; - - if (src == 14) - src = WM831X_AUX_CAL; - - if (src != input) { - dev_err(wm831x->dev, "Data from source %d not %d\n", - src, input); - ret = -EINVAL; - } else { - ret &= WM831X_AUX_DATA_MASK; - } - } - -disable: - wm831x_set_bits(wm831x, WM831X_AUXADC_CONTROL, WM831X_AUX_ENA, 0); -out: - mutex_unlock(&wm831x->auxadc_lock); - return ret; -} -EXPORT_SYMBOL_GPL(wm831x_auxadc_read); - -static irqreturn_t wm831x_auxadc_irq(int irq, void *irq_data) -{ - struct wm831x *wm831x = irq_data; - - complete(&wm831x->auxadc_done); - - return IRQ_HANDLED; -} - -/** - * wm831x_auxadc_read_uv: Read a voltage from the WM831x AUXADC - * - * @wm831x: Device to read from. - * @input: AUXADC input to read. - */ -int wm831x_auxadc_read_uv(struct wm831x *wm831x, enum wm831x_auxadc input) -{ - int ret; - - ret = wm831x_auxadc_read(wm831x, input); - if (ret < 0) - return ret; - - ret *= 1465; - - return ret; -} -EXPORT_SYMBOL_GPL(wm831x_auxadc_read_uv); - static struct resource wm831x_dcdc1_resources[] = { { .start = WM831X_DC1_CONTROL_1, @@ -872,6 +732,9 @@ static struct mfd_cell wm8310_devs[] = { .resources = wm831x_dcdc4_resources, }, { + .name = "wm831x-clk", + }, + { .name = "wm831x-epe", .id = 1, }, @@ -976,11 +839,6 @@ static struct mfd_cell wm8310_devs[] = { .resources = wm831x_power_resources, }, { - .name = "wm831x-rtc", - .num_resources = ARRAY_SIZE(wm831x_rtc_resources), - .resources = wm831x_rtc_resources, - }, - { .name = "wm831x-status", .id = 1, .num_resources = ARRAY_SIZE(wm831x_status1_resources), @@ -1028,6 +886,9 @@ static struct mfd_cell wm8311_devs[] = { .resources = wm831x_dcdc4_resources, }, { + .name = "wm831x-clk", + }, + { .name = "wm831x-epe", .id = 1, }, @@ -1108,11 +969,6 @@ static struct mfd_cell wm8311_devs[] = { .resources = wm831x_power_resources, }, { - .name = "wm831x-rtc", - .num_resources = ARRAY_SIZE(wm831x_rtc_resources), - .resources = wm831x_rtc_resources, - }, - { .name = "wm831x-status", .id = 1, .num_resources = ARRAY_SIZE(wm831x_status1_resources), @@ -1125,11 +981,6 @@ static struct mfd_cell wm8311_devs[] = { .resources = wm831x_status2_resources, }, { - .name = "wm831x-touch", - .num_resources = ARRAY_SIZE(wm831x_touch_resources), - .resources = wm831x_touch_resources, - }, - { .name = "wm831x-watchdog", .num_resources = ARRAY_SIZE(wm831x_wdt_resources), .resources = wm831x_wdt_resources, @@ -1165,6 +1016,9 @@ static struct mfd_cell wm8312_devs[] = { .resources = wm831x_dcdc4_resources, }, { + .name = "wm831x-clk", + }, + { .name = "wm831x-epe", .id = 1, }, @@ -1269,11 +1123,6 @@ static struct mfd_cell wm8312_devs[] = { .resources = wm831x_power_resources, }, { - .name = "wm831x-rtc", - .num_resources = ARRAY_SIZE(wm831x_rtc_resources), - .resources = wm831x_rtc_resources, - }, - { .name = "wm831x-status", .id = 1, .num_resources = ARRAY_SIZE(wm831x_status1_resources), @@ -1286,11 +1135,6 @@ static struct mfd_cell wm8312_devs[] = { .resources = wm831x_status2_resources, }, { - .name = "wm831x-touch", - .num_resources = ARRAY_SIZE(wm831x_touch_resources), - .resources = wm831x_touch_resources, - }, - { .name = "wm831x-watchdog", .num_resources = ARRAY_SIZE(wm831x_wdt_resources), .resources = wm831x_wdt_resources, @@ -1326,6 +1170,9 @@ static struct mfd_cell wm8320_devs[] = { .resources = wm8320_dcdc4_buck_resources, }, { + .name = "wm831x-clk", + }, + { .name = "wm831x-gpio", .num_resources = ARRAY_SIZE(wm831x_gpio_resources), .resources = wm831x_gpio_resources, @@ -1405,11 +1252,6 @@ static struct mfd_cell wm8320_devs[] = { .resources = wm831x_on_resources, }, { - .name = "wm831x-rtc", - .num_resources = ARRAY_SIZE(wm831x_rtc_resources), - .resources = wm831x_rtc_resources, - }, - { .name = "wm831x-status", .id = 1, .num_resources = ARRAY_SIZE(wm831x_status1_resources), @@ -1428,6 +1270,22 @@ static struct mfd_cell wm8320_devs[] = { }, }; +static struct mfd_cell touch_devs[] = { + { + .name = "wm831x-touch", + .num_resources = ARRAY_SIZE(wm831x_touch_resources), + .resources = wm831x_touch_resources, + }, +}; + +static struct mfd_cell rtc_devs[] = { + { + .name = "wm831x-rtc", + .num_resources = ARRAY_SIZE(wm831x_rtc_resources), + .resources = wm831x_rtc_resources, + }, +}; + static struct mfd_cell backlight_devs[] = { { .name = "wm831x-backlight", @@ -1440,14 +1298,12 @@ static struct mfd_cell backlight_devs[] = { int wm831x_device_init(struct wm831x *wm831x, unsigned long id, int irq) { struct wm831x_pdata *pdata = wm831x->dev->platform_data; - int rev; + int rev, wm831x_num; enum wm831x_parent parent; int ret, i; mutex_init(&wm831x->io_lock); mutex_init(&wm831x->key_lock); - mutex_init(&wm831x->auxadc_lock); - init_completion(&wm831x->auxadc_done); dev_set_drvdata(wm831x->dev, wm831x); ret = wm831x_reg_read(wm831x, WM831X_PARENT_ID); @@ -1592,45 +1448,51 @@ int wm831x_device_init(struct wm831x *wm831x, unsigned long id, int irq) } } + /* Multiply by 10 as we have many subdevices of the same type */ + if (pdata && pdata->wm831x_num) + wm831x_num = pdata->wm831x_num * 10; + else + wm831x_num = -1; + ret = wm831x_irq_init(wm831x, irq); if (ret != 0) goto err; - if (wm831x->irq_base) { - ret = request_threaded_irq(wm831x->irq_base + - WM831X_IRQ_AUXADC_DATA, - NULL, wm831x_auxadc_irq, 0, - "auxadc", wm831x); - if (ret < 0) - dev_err(wm831x->dev, "AUXADC IRQ request failed: %d\n", - ret); - } + wm831x_auxadc_init(wm831x); /* The core device is up, instantiate the subdevices. */ switch (parent) { case WM8310: - ret = mfd_add_devices(wm831x->dev, -1, + ret = mfd_add_devices(wm831x->dev, wm831x_num, wm8310_devs, ARRAY_SIZE(wm8310_devs), NULL, wm831x->irq_base); break; case WM8311: - ret = mfd_add_devices(wm831x->dev, -1, + ret = mfd_add_devices(wm831x->dev, wm831x_num, wm8311_devs, ARRAY_SIZE(wm8311_devs), NULL, wm831x->irq_base); + if (!pdata || !pdata->disable_touch) + mfd_add_devices(wm831x->dev, wm831x_num, + touch_devs, ARRAY_SIZE(touch_devs), + NULL, wm831x->irq_base); break; case WM8312: - ret = mfd_add_devices(wm831x->dev, -1, + ret = mfd_add_devices(wm831x->dev, wm831x_num, wm8312_devs, ARRAY_SIZE(wm8312_devs), NULL, wm831x->irq_base); + if (!pdata || !pdata->disable_touch) + mfd_add_devices(wm831x->dev, wm831x_num, + touch_devs, ARRAY_SIZE(touch_devs), + NULL, wm831x->irq_base); break; case WM8320: case WM8321: case WM8325: case WM8326: - ret = mfd_add_devices(wm831x->dev, -1, + ret = mfd_add_devices(wm831x->dev, wm831x_num, wm8320_devs, ARRAY_SIZE(wm8320_devs), NULL, wm831x->irq_base); break; @@ -1645,9 +1507,30 @@ int wm831x_device_init(struct wm831x *wm831x, unsigned long id, int irq) goto err_irq; } + /* The RTC can only be used if the 32.768kHz crystal is + * enabled; this can't be controlled by software at runtime. + */ + ret = wm831x_reg_read(wm831x, WM831X_CLOCK_CONTROL_2); + if (ret < 0) { + dev_err(wm831x->dev, "Failed to read clock status: %d\n", ret); + goto err_irq; + } + + if (ret & WM831X_XTAL_ENA) { + ret = mfd_add_devices(wm831x->dev, wm831x_num, + rtc_devs, ARRAY_SIZE(rtc_devs), + NULL, wm831x->irq_base); + if (ret != 0) { + dev_err(wm831x->dev, "Failed to add RTC: %d\n", ret); + goto err_irq; + } + } else { + dev_info(wm831x->dev, "32.768kHz clock disabled, no RTC\n"); + } + if (pdata && pdata->backlight) { /* Treat errors as non-critical */ - ret = mfd_add_devices(wm831x->dev, -1, backlight_devs, + ret = mfd_add_devices(wm831x->dev, wm831x_num, backlight_devs, ARRAY_SIZE(backlight_devs), NULL, wm831x->irq_base); if (ret < 0) |