diff options
Diffstat (limited to 'drivers/media/video/mt9v022.c')
-rw-r--r-- | drivers/media/video/mt9v022.c | 205 |
1 files changed, 82 insertions, 123 deletions
diff --git a/drivers/media/video/mt9v022.c b/drivers/media/video/mt9v022.c index b04c8cb1644d..4d3b4813c322 100644 --- a/drivers/media/video/mt9v022.c +++ b/drivers/media/video/mt9v022.c @@ -13,7 +13,6 @@ #include <linux/i2c.h> #include <linux/delay.h> #include <linux/log2.h> -#include <linux/gpio.h> #include <media/v4l2-common.h> #include <media/v4l2-chip-ident.h> @@ -89,9 +88,7 @@ struct mt9v022 { struct i2c_client *client; struct soc_camera_device icd; int model; /* V4L2_IDENT_MT9V022* codes from v4l2-chip-ident.h */ - int switch_gpio; u16 chip_control; - unsigned char datawidth; }; static int reg_read(struct soc_camera_device *icd, const u8 reg) @@ -209,66 +206,6 @@ static int mt9v022_stop_capture(struct soc_camera_device *icd) return 0; } -static int bus_switch_request(struct mt9v022 *mt9v022, struct soc_camera_link *icl) -{ -#ifdef CONFIG_MT9V022_PCA9536_SWITCH - int ret; - unsigned int gpio = icl->gpio; - - if (gpio_is_valid(gpio)) { - /* We have a data bus switch. */ - ret = gpio_request(gpio, "mt9v022"); - if (ret < 0) { - dev_err(&mt9v022->client->dev, "Cannot get GPIO %u\n", gpio); - return ret; - } - - ret = gpio_direction_output(gpio, 0); - if (ret < 0) { - dev_err(&mt9v022->client->dev, - "Cannot set GPIO %u to output\n", gpio); - gpio_free(gpio); - return ret; - } - } - - mt9v022->switch_gpio = gpio; -#else - mt9v022->switch_gpio = -EINVAL; -#endif - return 0; -} - -static void bus_switch_release(struct mt9v022 *mt9v022) -{ -#ifdef CONFIG_MT9V022_PCA9536_SWITCH - if (gpio_is_valid(mt9v022->switch_gpio)) - gpio_free(mt9v022->switch_gpio); -#endif -} - -static int bus_switch_act(struct mt9v022 *mt9v022, int go8bit) -{ -#ifdef CONFIG_MT9V022_PCA9536_SWITCH - if (!gpio_is_valid(mt9v022->switch_gpio)) - return -ENODEV; - - gpio_set_value_cansleep(mt9v022->switch_gpio, go8bit); - return 0; -#else - return -ENODEV; -#endif -} - -static int bus_switch_possible(struct mt9v022 *mt9v022) -{ -#ifdef CONFIG_MT9V022_PCA9536_SWITCH - return gpio_is_valid(mt9v022->switch_gpio); -#else - return 0; -#endif -} - static int mt9v022_set_bus_param(struct soc_camera_device *icd, unsigned long flags) { @@ -282,19 +219,17 @@ static int mt9v022_set_bus_param(struct soc_camera_device *icd, if (!is_power_of_2(width_flag)) return -EINVAL; - if ((mt9v022->datawidth != 10 && (width_flag == SOCAM_DATAWIDTH_10)) || - (mt9v022->datawidth != 9 && (width_flag == SOCAM_DATAWIDTH_9)) || - (mt9v022->datawidth != 8 && (width_flag == SOCAM_DATAWIDTH_8))) { - /* Well, we actually only can do 10 or 8 bits... */ - if (width_flag == SOCAM_DATAWIDTH_9) - return -EINVAL; - - ret = bus_switch_act(mt9v022, - width_flag == SOCAM_DATAWIDTH_8); - if (ret < 0) + if (icl->set_bus_param) { + ret = icl->set_bus_param(icl, width_flag); + if (ret) return ret; - - mt9v022->datawidth = width_flag == SOCAM_DATAWIDTH_8 ? 8 : 10; + } else { + /* + * Without board specific bus width settings we only support the + * sensors native bus width + */ + if (width_flag != SOCAM_DATAWIDTH_10) + return -EINVAL; } flags = soc_camera_apply_sensor_flags(icl, flags); @@ -328,44 +263,27 @@ static int mt9v022_set_bus_param(struct soc_camera_device *icd, static unsigned long mt9v022_query_bus_param(struct soc_camera_device *icd) { struct mt9v022 *mt9v022 = container_of(icd, struct mt9v022, icd); - unsigned int width_flag = SOCAM_DATAWIDTH_10; + struct soc_camera_link *icl = mt9v022->client->dev.platform_data; + unsigned int width_flag; - if (bus_switch_possible(mt9v022)) - width_flag |= SOCAM_DATAWIDTH_8; + if (icl->query_bus_param) + width_flag = icl->query_bus_param(icl) & + SOCAM_DATAWIDTH_MASK; + else + width_flag = SOCAM_DATAWIDTH_10; return SOCAM_PCLK_SAMPLE_RISING | SOCAM_PCLK_SAMPLE_FALLING | SOCAM_HSYNC_ACTIVE_HIGH | SOCAM_HSYNC_ACTIVE_LOW | SOCAM_VSYNC_ACTIVE_HIGH | SOCAM_VSYNC_ACTIVE_LOW | - SOCAM_MASTER | SOCAM_SLAVE | + SOCAM_DATA_ACTIVE_HIGH | SOCAM_MASTER | SOCAM_SLAVE | width_flag; } -static int mt9v022_set_fmt(struct soc_camera_device *icd, - __u32 pixfmt, struct v4l2_rect *rect) +static int mt9v022_set_crop(struct soc_camera_device *icd, + struct v4l2_rect *rect) { - struct mt9v022 *mt9v022 = container_of(icd, struct mt9v022, icd); int ret; - /* The caller provides a supported format, as verified per call to - * icd->try_fmt(), datawidth is from our supported format list */ - switch (pixfmt) { - case V4L2_PIX_FMT_GREY: - case V4L2_PIX_FMT_Y16: - if (mt9v022->model != V4L2_IDENT_MT9V022IX7ATM) - return -EINVAL; - break; - case V4L2_PIX_FMT_SBGGR8: - case V4L2_PIX_FMT_SBGGR16: - if (mt9v022->model != V4L2_IDENT_MT9V022IX7ATC) - return -EINVAL; - break; - case 0: - /* No format change, only geometry */ - break; - default: - return -EINVAL; - } - /* Like in example app. Contradicts the datasheet though */ ret = reg_read(icd, MT9V022_AEC_AGC_ENABLE); if (ret >= 0) { @@ -403,6 +321,42 @@ static int mt9v022_set_fmt(struct soc_camera_device *icd, return 0; } +static int mt9v022_set_fmt(struct soc_camera_device *icd, + struct v4l2_format *f) +{ + struct mt9v022 *mt9v022 = container_of(icd, struct mt9v022, icd); + struct v4l2_pix_format *pix = &f->fmt.pix; + struct v4l2_rect rect = { + .left = icd->x_current, + .top = icd->y_current, + .width = pix->width, + .height = pix->height, + }; + + /* The caller provides a supported format, as verified per call to + * icd->try_fmt(), datawidth is from our supported format list */ + switch (pix->pixelformat) { + case V4L2_PIX_FMT_GREY: + case V4L2_PIX_FMT_Y16: + if (mt9v022->model != V4L2_IDENT_MT9V022IX7ATM) + return -EINVAL; + break; + case V4L2_PIX_FMT_SBGGR8: + case V4L2_PIX_FMT_SBGGR16: + if (mt9v022->model != V4L2_IDENT_MT9V022IX7ATC) + return -EINVAL; + break; + case 0: + /* No format change, only geometry */ + break; + default: + return -EINVAL; + } + + /* No support for scaling on this camera, just crop. */ + return mt9v022_set_crop(icd, &rect); +} + static int mt9v022_try_fmt(struct soc_camera_device *icd, struct v4l2_format *f) { @@ -544,6 +498,7 @@ static struct soc_camera_ops mt9v022_ops = { .release = mt9v022_release, .start_capture = mt9v022_start_capture, .stop_capture = mt9v022_stop_capture, + .set_crop = mt9v022_set_crop, .set_fmt = mt9v022_set_fmt, .try_fmt = mt9v022_try_fmt, .set_bus_param = mt9v022_set_bus_param, @@ -699,6 +654,7 @@ static int mt9v022_video_probe(struct soc_camera_device *icd) struct soc_camera_link *icl = mt9v022->client->dev.platform_data; s32 data; int ret; + unsigned long flags; if (!icd->dev.parent || to_soc_camera_host(icd->dev.parent)->nr != icd->iface) @@ -732,22 +688,36 @@ static int mt9v022_video_probe(struct soc_camera_device *icd) ret = reg_write(icd, MT9V022_PIXEL_OPERATION_MODE, 4 | 0x11); mt9v022->model = V4L2_IDENT_MT9V022IX7ATC; icd->formats = mt9v022_colour_formats; - if (gpio_is_valid(icl->gpio)) - icd->num_formats = ARRAY_SIZE(mt9v022_colour_formats); - else - icd->num_formats = 1; } else { ret = reg_write(icd, MT9V022_PIXEL_OPERATION_MODE, 0x11); mt9v022->model = V4L2_IDENT_MT9V022IX7ATM; icd->formats = mt9v022_monochrome_formats; - if (gpio_is_valid(icl->gpio)) - icd->num_formats = ARRAY_SIZE(mt9v022_monochrome_formats); - else - icd->num_formats = 1; } - if (!ret) - ret = soc_camera_video_start(icd); + if (ret < 0) + goto eisis; + + icd->num_formats = 0; + + /* + * This is a 10bit sensor, so by default we only allow 10bit. + * The platform may support different bus widths due to + * different routing of the data lines. + */ + if (icl->query_bus_param) + flags = icl->query_bus_param(icl); + else + flags = SOCAM_DATAWIDTH_10; + + if (flags & SOCAM_DATAWIDTH_10) + icd->num_formats++; + else + icd->formats++; + + if (flags & SOCAM_DATAWIDTH_8) + icd->num_formats++; + + ret = soc_camera_video_start(icd); if (ret < 0) goto eisis; @@ -812,14 +782,6 @@ static int mt9v022_probe(struct i2c_client *client, icd->height_max = 480; icd->y_skip_top = 1; icd->iface = icl->bus_id; - /* Default datawidth - this is the only width this camera (normally) - * supports. It is only with extra logic that it can support - * other widths. Therefore it seems to be a sensible default. */ - mt9v022->datawidth = 10; - - ret = bus_switch_request(mt9v022, icl); - if (ret) - goto eswinit; ret = soc_camera_device_register(icd); if (ret) @@ -828,8 +790,6 @@ static int mt9v022_probe(struct i2c_client *client, return 0; eisdr: - bus_switch_release(mt9v022); -eswinit: kfree(mt9v022); return ret; } @@ -839,7 +799,6 @@ static int mt9v022_remove(struct i2c_client *client) struct mt9v022 *mt9v022 = i2c_get_clientdata(client); soc_camera_device_unregister(&mt9v022->icd); - bus_switch_release(mt9v022); kfree(mt9v022); return 0; |