diff options
Diffstat (limited to 'drivers/media/platform/ti-vpe/cal.c')
| -rw-r--r-- | drivers/media/platform/ti-vpe/cal.c | 57 |
1 files changed, 55 insertions, 2 deletions
diff --git a/drivers/media/platform/ti-vpe/cal.c b/drivers/media/platform/ti-vpe/cal.c index eb3727ba185d..3b04aff6c778 100644 --- a/drivers/media/platform/ti-vpe/cal.c +++ b/drivers/media/platform/ti-vpe/cal.c @@ -282,6 +282,12 @@ static const struct cal_data dra72x_cal_data = { .num_csi2_phy = ARRAY_SIZE(dra72x_cal_csi_phy), }; +static const struct cal_data dra72x_es1_cal_data = { + .csi2_phy_core = dra72x_cal_csi_phy, + .num_csi2_phy = ARRAY_SIZE(dra72x_cal_csi_phy), + .flags = DRA72_CAL_PRE_ES2_LDO_DISABLE, +}; + /* * there is one cal_dev structure in the driver, it is shared by * all instances. @@ -567,9 +573,52 @@ static void cal_get_hwinfo(struct cal_dev *dev) hwinfo); } -static inline int cal_runtime_get(struct cal_dev *dev) +/* + * Errata i913: CSI2 LDO Needs to be disabled when module is powered on + * + * Enabling CSI2 LDO shorts it to core supply. It is crucial the 2 CSI2 + * LDOs on the device are disabled if CSI-2 module is powered on + * (0x4845 B304 | 0x4845 B384 [28:27] = 0x1) or in ULPS (0x4845 B304 + * | 0x4845 B384 [28:27] = 0x2) mode. Common concerns include: high + * current draw on the module supply in active mode. + * + * Errata does not apply when CSI-2 module is powered off + * (0x4845 B304 | 0x4845 B384 [28:27] = 0x0). + * + * SW Workaround: + * Set the following register bits to disable the LDO, + * which is essentially CSI2 REG10 bit 6: + * + * Core 0: 0x4845 B828 = 0x0000 0040 + * Core 1: 0x4845 B928 = 0x0000 0040 + */ +static void i913_errata(struct cal_dev *dev, unsigned int port) { - return pm_runtime_get_sync(&dev->pdev->dev); + u32 reg10 = reg_read(dev->cc[port], CAL_CSI2_PHY_REG10); + + set_field(®10, CAL_CSI2_PHY_REG0_HSCLOCKCONFIG_DISABLE, + CAL_CSI2_PHY_REG10_I933_LDO_DISABLE_MASK); + + cal_dbg(1, dev, "CSI2_%d_REG10 = 0x%08x\n", port, reg10); + reg_write(dev->cc[port], CAL_CSI2_PHY_REG10, reg10); +} + +static int cal_runtime_get(struct cal_dev *dev) +{ + int r; + + r = pm_runtime_get_sync(&dev->pdev->dev); + + if (dev->flags & DRA72_CAL_PRE_ES2_LDO_DISABLE) { + /* + * Apply errata on both port eveytime we (re-)enable + * the clock + */ + i913_errata(dev, 0); + i913_errata(dev, 1); + } + + return r; } static inline void cal_runtime_put(struct cal_dev *dev) @@ -2064,6 +2113,10 @@ static const struct of_device_id cal_of_match[] = { .compatible = "ti,dra72-cal", .data = (void *)&dra72x_cal_data, }, + { + .compatible = "ti,dra72-pre-es2-cal", + .data = (void *)&dra72x_es1_cal_data, + }, {}, }; MODULE_DEVICE_TABLE(of, cal_of_match); |