diff options
Diffstat (limited to 'drivers/irqchip/irq-metag.c')
| -rw-r--r-- | drivers/irqchip/irq-metag.c | 343 |
1 files changed, 343 insertions, 0 deletions
diff --git a/drivers/irqchip/irq-metag.c b/drivers/irqchip/irq-metag.c new file mode 100644 index 000000000000..8e94d7a3b20d --- /dev/null +++ b/drivers/irqchip/irq-metag.c @@ -0,0 +1,343 @@ +/* + * Meta internal (HWSTATMETA) interrupt code. + * + * Copyright (C) 2011-2012 Imagination Technologies Ltd. + * + * This code is based on the code in SoC/common/irq.c and SoC/comet/irq.c + * The code base could be generalised/merged as a lot of the functionality is + * similar. Until this is done, we try to keep the code simple here. + */ + +#include <linux/interrupt.h> +#include <linux/io.h> +#include <linux/irqdomain.h> + +#include <asm/irq.h> +#include <asm/hwthread.h> + +#define PERF0VECINT 0x04820580 +#define PERF1VECINT 0x04820588 +#define PERF0TRIG_OFFSET 16 +#define PERF1TRIG_OFFSET 17 + +/** + * struct metag_internal_irq_priv - private meta internal interrupt data + * @domain: IRQ domain for all internal Meta IRQs (HWSTATMETA) + * @unmasked: Record of unmasked IRQs + */ +struct metag_internal_irq_priv { + struct irq_domain *domain; + + unsigned long unmasked; +}; + +/* Private data for the one and only internal interrupt controller */ +static struct metag_internal_irq_priv metag_internal_irq_priv; + +static unsigned int metag_internal_irq_startup(struct irq_data *data); +static void metag_internal_irq_shutdown(struct irq_data *data); +static void metag_internal_irq_ack(struct irq_data *data); +static void metag_internal_irq_mask(struct irq_data *data); +static void metag_internal_irq_unmask(struct irq_data *data); +#ifdef CONFIG_SMP +static int metag_internal_irq_set_affinity(struct irq_data *data, + const struct cpumask *cpumask, bool force); +#endif + +static struct irq_chip internal_irq_edge_chip = { + .name = "HWSTATMETA-IRQ", + .irq_startup = metag_internal_irq_startup, + .irq_shutdown = metag_internal_irq_shutdown, + .irq_ack = metag_internal_irq_ack, + .irq_mask = metag_internal_irq_mask, + .irq_unmask = metag_internal_irq_unmask, +#ifdef CONFIG_SMP + .irq_set_affinity = metag_internal_irq_set_affinity, +#endif +}; + +/* + * metag_hwvec_addr - get the address of *VECINT regs of irq + * + * This function is a table of supported triggers on HWSTATMETA + * Could do with a structure, but better keep it simple. Changes + * in this code should be rare. + */ +static inline void __iomem *metag_hwvec_addr(irq_hw_number_t hw) +{ + void __iomem *addr; + + switch (hw) { + case PERF0TRIG_OFFSET: + addr = (void __iomem *)PERF0VECINT; + break; + case PERF1TRIG_OFFSET: + addr = (void __iomem *)PERF1VECINT; + break; + default: + addr = NULL; + break; + } + return addr; +} + +/* + * metag_internal_startup - setup an internal irq + * @irq: the irq to startup + * + * Multiplex interrupts for @irq onto TR1. Clear any pending + * interrupts. + */ +static unsigned int metag_internal_irq_startup(struct irq_data *data) +{ + /* Clear (toggle) the bit in HWSTATMETA for our interrupt. */ + metag_internal_irq_ack(data); + + /* Enable the interrupt by unmasking it */ + metag_internal_irq_unmask(data); + + return 0; +} + +/* + * metag_internal_irq_shutdown - turn off the irq + * @irq: the irq number to turn off + * + * Mask @irq and clear any pending interrupts. + * Stop muxing @irq onto TR1. + */ +static void metag_internal_irq_shutdown(struct irq_data *data) +{ + /* Disable the IRQ at the core by masking it. */ + metag_internal_irq_mask(data); + + /* Clear (toggle) the bit in HWSTATMETA for our interrupt. */ + metag_internal_irq_ack(data); +} + +/* + * metag_internal_irq_ack - acknowledge irq + * @irq: the irq to ack + */ +static void metag_internal_irq_ack(struct irq_data *data) +{ + irq_hw_number_t hw = data->hwirq; + unsigned int bit = 1 << hw; + + if (metag_in32(HWSTATMETA) & bit) + metag_out32(bit, HWSTATMETA); +} + +/** + * metag_internal_irq_mask() - mask an internal irq by unvectoring + * @data: data for the internal irq to mask + * + * HWSTATMETA has no mask register. Instead the IRQ is unvectored from the core + * and retriggered if necessary later. + */ +static void metag_internal_irq_mask(struct irq_data *data) +{ + struct metag_internal_irq_priv *priv = &metag_internal_irq_priv; + irq_hw_number_t hw = data->hwirq; + void __iomem *vec_addr = metag_hwvec_addr(hw); + + clear_bit(hw, &priv->unmasked); + + /* there is no interrupt mask, so unvector the interrupt */ + metag_out32(0, vec_addr); +} + +/** + * meta_intc_unmask_edge_irq_nomask() - unmask an edge irq by revectoring + * @data: data for the internal irq to unmask + * + * HWSTATMETA has no mask register. Instead the IRQ is revectored back to the + * core and retriggered if necessary. + */ +static void metag_internal_irq_unmask(struct irq_data *data) +{ + struct metag_internal_irq_priv *priv = &metag_internal_irq_priv; + irq_hw_number_t hw = data->hwirq; + unsigned int bit = 1 << hw; + void __iomem *vec_addr = metag_hwvec_addr(hw); + unsigned int thread = hard_processor_id(); + + set_bit(hw, &priv->unmasked); + + /* there is no interrupt mask, so revector the interrupt */ + metag_out32(TBI_TRIG_VEC(TBID_SIGNUM_TR1(thread)), vec_addr); + + /* + * Re-trigger interrupt + * + * Writing a 1 toggles, and a 0->1 transition triggers. We only + * retrigger if the status bit is already set, which means we + * need to clear it first. Retriggering is fundamentally racy + * because if the interrupt fires again after we clear it we + * could end up clearing it again and the interrupt handler + * thinking it hasn't fired. Therefore we need to keep trying to + * retrigger until the bit is set. + */ + if (metag_in32(HWSTATMETA) & bit) { + metag_out32(bit, HWSTATMETA); + while (!(metag_in32(HWSTATMETA) & bit)) + metag_out32(bit, HWSTATMETA); + } +} + +#ifdef CONFIG_SMP +/* + * metag_internal_irq_set_affinity - set the affinity for an interrupt + */ +static int metag_internal_irq_set_affinity(struct irq_data *data, + const struct cpumask *cpumask, bool force) +{ + unsigned int cpu, thread; + irq_hw_number_t hw = data->hwirq; + /* + * Wire up this interrupt from *VECINT to the Meta core. + * + * Note that we can't wire up *VECINT to interrupt more than + * one cpu (the interrupt code doesn't support it), so we just + * pick the first cpu we find in 'cpumask'. + */ + cpu = cpumask_any(cpumask); + thread = cpu_2_hwthread_id[cpu]; + + metag_out32(TBI_TRIG_VEC(TBID_SIGNUM_TR1(thread)), + metag_hwvec_addr(hw)); + + return 0; +} +#endif + +/* + * metag_internal_irq_demux - irq de-multiplexer + * @irq: the interrupt number + * @desc: the interrupt description structure for this irq + * + * The cpu receives an interrupt on TR1 when an interrupt has + * occurred. It is this function's job to demux this irq and + * figure out exactly which trigger needs servicing. + */ +static void metag_internal_irq_demux(unsigned int irq, struct irq_desc *desc) +{ + struct metag_internal_irq_priv *priv = irq_desc_get_handler_data(desc); + irq_hw_number_t hw; + unsigned int irq_no; + u32 status; + +recalculate: + status = metag_in32(HWSTATMETA) & priv->unmasked; + + for (hw = 0; status != 0; status >>= 1, ++hw) { + if (status & 0x1) { + /* + * Map the hardware IRQ number to a virtual Linux IRQ + * number. + */ + irq_no = irq_linear_revmap(priv->domain, hw); + + /* + * Only fire off interrupts that are + * registered to be handled by the kernel. + * Other interrupts are probably being + * handled by other Meta hardware threads. + */ + generic_handle_irq(irq_no); + + /* + * The handler may have re-enabled interrupts + * which could have caused a nested invocation + * of this code and make the copy of the + * status register we are using invalid. + */ + goto recalculate; + } + } +} + +/** + * internal_irq_map() - Map an internal meta IRQ to a virtual IRQ number. + * @hw: Number of the internal IRQ. Must be in range. + * + * Returns: The virtual IRQ number of the Meta internal IRQ specified by + * @hw. + */ +int internal_irq_map(unsigned int hw) +{ + struct metag_internal_irq_priv *priv = &metag_internal_irq_priv; + if (!priv->domain) + return -ENODEV; + return irq_create_mapping(priv->domain, hw); +} + +/** + * metag_internal_irq_init_cpu - regsister with the Meta cpu + * @cpu: the CPU to register on + * + * Configure @cpu's TR1 irq so that we can demux irqs. + */ +static void metag_internal_irq_init_cpu(struct metag_internal_irq_priv *priv, + int cpu) +{ + unsigned int thread = cpu_2_hwthread_id[cpu]; + unsigned int signum = TBID_SIGNUM_TR1(thread); + int irq = tbisig_map(signum); + + /* Register the multiplexed IRQ handler */ + irq_set_handler_data(irq, priv); + irq_set_chained_handler(irq, metag_internal_irq_demux); + irq_set_irq_type(irq, IRQ_TYPE_LEVEL_LOW); +} + +/** + * metag_internal_intc_map() - map an internal irq + * @d: irq domain of internal trigger block + * @irq: virtual irq number + * @hw: hardware irq number within internal trigger block + * + * This sets up a virtual irq for a specified hardware interrupt. The irq chip + * and handler is configured. + */ +static int metag_internal_intc_map(struct irq_domain *d, unsigned int irq, + irq_hw_number_t hw) +{ + /* only register interrupt if it is mapped */ + if (!metag_hwvec_addr(hw)) + return -EINVAL; + + irq_set_chip_and_handler(irq, &internal_irq_edge_chip, + handle_edge_irq); + return 0; +} + +static const struct irq_domain_ops metag_internal_intc_domain_ops = { + .map = metag_internal_intc_map, +}; + +/** + * metag_internal_irq_register - register internal IRQs + * + * Register the irq chip and handler function for all internal IRQs + */ +int __init init_internal_IRQ(void) +{ + struct metag_internal_irq_priv *priv = &metag_internal_irq_priv; + unsigned int cpu; + + /* Set up an IRQ domain */ + priv->domain = irq_domain_add_linear(NULL, 32, + &metag_internal_intc_domain_ops, + priv); + if (unlikely(!priv->domain)) { + pr_err("meta-internal-intc: cannot add IRQ domain\n"); + return -ENOMEM; + } + + /* Setup TR1 for all cpus. */ + for_each_possible_cpu(cpu) + metag_internal_irq_init_cpu(priv, cpu); + + return 0; +}; |