diff options
Diffstat (limited to 'drivers/ide/siimage.c')
| -rw-r--r-- | drivers/ide/siimage.c | 857 |
1 files changed, 857 insertions, 0 deletions
diff --git a/drivers/ide/siimage.c b/drivers/ide/siimage.c new file mode 100644 index 000000000000..7d622d20bc4c --- /dev/null +++ b/drivers/ide/siimage.c @@ -0,0 +1,857 @@ +/* + * Copyright (C) 2001-2002 Andre Hedrick <andre@linux-ide.org> + * Copyright (C) 2003 Red Hat + * Copyright (C) 2007-2008 MontaVista Software, Inc. + * Copyright (C) 2007-2008 Bartlomiej Zolnierkiewicz + * + * May be copied or modified under the terms of the GNU General Public License + * + * Documentation for CMD680: + * http://gkernel.sourceforge.net/specs/sii/sii-0680a-v1.31.pdf.bz2 + * + * Documentation for SiI 3112: + * http://gkernel.sourceforge.net/specs/sii/3112A_SiI-DS-0095-B2.pdf.bz2 + * + * Errata and other documentation only available under NDA. + * + * + * FAQ Items: + * If you are using Marvell SATA-IDE adapters with Maxtor drives + * ensure the system is set up for ATA100/UDMA5, not UDMA6. + * + * If you are using WD drives with SATA bridges you must set the + * drive to "Single". "Master" will hang. + * + * If you have strange problems with nVidia chipset systems please + * see the SI support documentation and update your system BIOS + * if necessary + * + * The Dell DRAC4 has some interesting features including effectively hot + * unplugging/replugging the virtual CD interface when the DRAC is reset. + * This often causes drivers/ide/siimage to panic but is ok with the rather + * smarter code in libata. + * + * TODO: + * - IORDY fixes + * - VDMA support + */ + +#include <linux/types.h> +#include <linux/module.h> +#include <linux/pci.h> +#include <linux/ide.h> +#include <linux/init.h> +#include <linux/io.h> + +#define DRV_NAME "siimage" + +/** + * pdev_is_sata - check if device is SATA + * @pdev: PCI device to check + * + * Returns true if this is a SATA controller + */ + +static int pdev_is_sata(struct pci_dev *pdev) +{ +#ifdef CONFIG_BLK_DEV_IDE_SATA + switch (pdev->device) { + case PCI_DEVICE_ID_SII_3112: + case PCI_DEVICE_ID_SII_1210SA: + return 1; + case PCI_DEVICE_ID_SII_680: + return 0; + } + BUG(); +#endif + return 0; +} + +/** + * is_sata - check if hwif is SATA + * @hwif: interface to check + * + * Returns true if this is a SATA controller + */ + +static inline int is_sata(ide_hwif_t *hwif) +{ + return pdev_is_sata(to_pci_dev(hwif->dev)); +} + +/** + * siimage_selreg - return register base + * @hwif: interface + * @r: config offset + * + * Turn a config register offset into the right address in either + * PCI space or MMIO space to access the control register in question + * Thankfully this is a configuration operation, so isn't performance + * critical. + */ + +static unsigned long siimage_selreg(ide_hwif_t *hwif, int r) +{ + unsigned long base = (unsigned long)hwif->hwif_data; + + base += 0xA0 + r; + if (hwif->host_flags & IDE_HFLAG_MMIO) + base += hwif->channel << 6; + else + base += hwif->channel << 4; + return base; +} + +/** + * siimage_seldev - return register base + * @hwif: interface + * @r: config offset + * + * Turn a config register offset into the right address in either + * PCI space or MMIO space to access the control register in question + * including accounting for the unit shift. + */ + +static inline unsigned long siimage_seldev(ide_drive_t *drive, int r) +{ + ide_hwif_t *hwif = HWIF(drive); + unsigned long base = (unsigned long)hwif->hwif_data; + u8 unit = drive->dn & 1; + + base += 0xA0 + r; + if (hwif->host_flags & IDE_HFLAG_MMIO) + base += hwif->channel << 6; + else + base += hwif->channel << 4; + base |= unit << unit; + return base; +} + +static u8 sil_ioread8(struct pci_dev *dev, unsigned long addr) +{ + struct ide_host *host = pci_get_drvdata(dev); + u8 tmp = 0; + + if (host->host_priv) + tmp = readb((void __iomem *)addr); + else + pci_read_config_byte(dev, addr, &tmp); + + return tmp; +} + +static u16 sil_ioread16(struct pci_dev *dev, unsigned long addr) +{ + struct ide_host *host = pci_get_drvdata(dev); + u16 tmp = 0; + + if (host->host_priv) + tmp = readw((void __iomem *)addr); + else + pci_read_config_word(dev, addr, &tmp); + + return tmp; +} + +static void sil_iowrite8(struct pci_dev *dev, u8 val, unsigned long addr) +{ + struct ide_host *host = pci_get_drvdata(dev); + + if (host->host_priv) + writeb(val, (void __iomem *)addr); + else + pci_write_config_byte(dev, addr, val); +} + +static void sil_iowrite16(struct pci_dev *dev, u16 val, unsigned long addr) +{ + struct ide_host *host = pci_get_drvdata(dev); + + if (host->host_priv) + writew(val, (void __iomem *)addr); + else + pci_write_config_word(dev, addr, val); +} + +static void sil_iowrite32(struct pci_dev *dev, u32 val, unsigned long addr) +{ + struct ide_host *host = pci_get_drvdata(dev); + + if (host->host_priv) + writel(val, (void __iomem *)addr); + else + pci_write_config_dword(dev, addr, val); +} + +/** + * sil_udma_filter - compute UDMA mask + * @drive: IDE device + * + * Compute the available UDMA speeds for the device on the interface. + * + * For the CMD680 this depends on the clocking mode (scsc), for the + * SI3112 SATA controller life is a bit simpler. + */ + +static u8 sil_pata_udma_filter(ide_drive_t *drive) +{ + ide_hwif_t *hwif = drive->hwif; + struct pci_dev *dev = to_pci_dev(hwif->dev); + unsigned long base = (unsigned long)hwif->hwif_data; + u8 scsc, mask = 0; + + base += (hwif->host_flags & IDE_HFLAG_MMIO) ? 0x4A : 0x8A; + + scsc = sil_ioread8(dev, base); + + switch (scsc & 0x30) { + case 0x10: /* 133 */ + mask = ATA_UDMA6; + break; + case 0x20: /* 2xPCI */ + mask = ATA_UDMA6; + break; + case 0x00: /* 100 */ + mask = ATA_UDMA5; + break; + default: /* Disabled ? */ + BUG(); + } + + return mask; +} + +static u8 sil_sata_udma_filter(ide_drive_t *drive) +{ + char *m = (char *)&drive->id[ATA_ID_PROD]; + + return strstr(m, "Maxtor") ? ATA_UDMA5 : ATA_UDMA6; +} + +/** + * sil_set_pio_mode - set host controller for PIO mode + * @drive: drive + * @pio: PIO mode number + * + * Load the timing settings for this device mode into the + * controller. If we are in PIO mode 3 or 4 turn on IORDY + * monitoring (bit 9). The TF timing is bits 31:16 + */ + +static void sil_set_pio_mode(ide_drive_t *drive, u8 pio) +{ + static const u16 tf_speed[] = { 0x328a, 0x2283, 0x1281, 0x10c3, 0x10c1 }; + static const u16 data_speed[] = { 0x328a, 0x2283, 0x1104, 0x10c3, 0x10c1 }; + + ide_hwif_t *hwif = HWIF(drive); + struct pci_dev *dev = to_pci_dev(hwif->dev); + ide_drive_t *pair = ide_get_pair_dev(drive); + u32 speedt = 0; + u16 speedp = 0; + unsigned long addr = siimage_seldev(drive, 0x04); + unsigned long tfaddr = siimage_selreg(hwif, 0x02); + unsigned long base = (unsigned long)hwif->hwif_data; + u8 tf_pio = pio; + u8 mmio = (hwif->host_flags & IDE_HFLAG_MMIO) ? 1 : 0; + u8 addr_mask = hwif->channel ? (mmio ? 0xF4 : 0x84) + : (mmio ? 0xB4 : 0x80); + u8 mode = 0; + u8 unit = drive->dn & 1; + + /* trim *taskfile* PIO to the slowest of the master/slave */ + if (pair) { + u8 pair_pio = ide_get_best_pio_mode(pair, 255, 4); + + if (pair_pio < tf_pio) + tf_pio = pair_pio; + } + + /* cheat for now and use the docs */ + speedp = data_speed[pio]; + speedt = tf_speed[tf_pio]; + + sil_iowrite16(dev, speedp, addr); + sil_iowrite16(dev, speedt, tfaddr); + + /* now set up IORDY */ + speedp = sil_ioread16(dev, tfaddr - 2); + speedp &= ~0x200; + if (pio > 2) + speedp |= 0x200; + sil_iowrite16(dev, speedp, tfaddr - 2); + + mode = sil_ioread8(dev, base + addr_mask); + mode &= ~(unit ? 0x30 : 0x03); + mode |= unit ? 0x10 : 0x01; + sil_iowrite8(dev, mode, base + addr_mask); +} + +/** + * sil_set_dma_mode - set host controller for DMA mode + * @drive: drive + * @speed: DMA mode + * + * Tune the SiI chipset for the desired DMA mode. + */ + +static void sil_set_dma_mode(ide_drive_t *drive, const u8 speed) +{ + static const u8 ultra6[] = { 0x0F, 0x0B, 0x07, 0x05, 0x03, 0x02, 0x01 }; + static const u8 ultra5[] = { 0x0C, 0x07, 0x05, 0x04, 0x02, 0x01 }; + static const u16 dma[] = { 0x2208, 0x10C2, 0x10C1 }; + + ide_hwif_t *hwif = HWIF(drive); + struct pci_dev *dev = to_pci_dev(hwif->dev); + unsigned long base = (unsigned long)hwif->hwif_data; + u16 ultra = 0, multi = 0; + u8 mode = 0, unit = drive->dn & 1; + u8 mmio = (hwif->host_flags & IDE_HFLAG_MMIO) ? 1 : 0; + u8 scsc = 0, addr_mask = hwif->channel ? (mmio ? 0xF4 : 0x84) + : (mmio ? 0xB4 : 0x80); + unsigned long ma = siimage_seldev(drive, 0x08); + unsigned long ua = siimage_seldev(drive, 0x0C); + + scsc = sil_ioread8 (dev, base + (mmio ? 0x4A : 0x8A)); + mode = sil_ioread8 (dev, base + addr_mask); + multi = sil_ioread16(dev, ma); + ultra = sil_ioread16(dev, ua); + + mode &= ~(unit ? 0x30 : 0x03); + ultra &= ~0x3F; + scsc = ((scsc & 0x30) == 0x00) ? 0 : 1; + + scsc = is_sata(hwif) ? 1 : scsc; + + if (speed >= XFER_UDMA_0) { + multi = dma[2]; + ultra |= scsc ? ultra6[speed - XFER_UDMA_0] : + ultra5[speed - XFER_UDMA_0]; + mode |= unit ? 0x30 : 0x03; + } else { + multi = dma[speed - XFER_MW_DMA_0]; + mode |= unit ? 0x20 : 0x02; + } + + sil_iowrite8 (dev, mode, base + addr_mask); + sil_iowrite16(dev, multi, ma); + sil_iowrite16(dev, ultra, ua); +} + +/* returns 1 if dma irq issued, 0 otherwise */ +static int siimage_io_dma_test_irq(ide_drive_t *drive) +{ + ide_hwif_t *hwif = HWIF(drive); + struct pci_dev *dev = to_pci_dev(hwif->dev); + u8 dma_altstat = 0; + unsigned long addr = siimage_selreg(hwif, 1); + + /* return 1 if INTR asserted */ + if (inb(hwif->dma_base + ATA_DMA_STATUS) & 4) + return 1; + + /* return 1 if Device INTR asserted */ + pci_read_config_byte(dev, addr, &dma_altstat); + if (dma_altstat & 8) + return 0; /* return 1; */ + + return 0; +} + +/** + * siimage_mmio_dma_test_irq - check we caused an IRQ + * @drive: drive we are testing + * + * Check if we caused an IDE DMA interrupt. We may also have caused + * SATA status interrupts, if so we clean them up and continue. + */ + +static int siimage_mmio_dma_test_irq(ide_drive_t *drive) +{ + ide_hwif_t *hwif = HWIF(drive); + unsigned long addr = siimage_selreg(hwif, 0x1); + void __iomem *sata_error_addr + = (void __iomem *)hwif->sata_scr[SATA_ERROR_OFFSET]; + + if (sata_error_addr) { + unsigned long base = (unsigned long)hwif->hwif_data; + u32 ext_stat = readl((void __iomem *)(base + 0x10)); + u8 watchdog = 0; + + if (ext_stat & ((hwif->channel) ? 0x40 : 0x10)) { + u32 sata_error = readl(sata_error_addr); + + writel(sata_error, sata_error_addr); + watchdog = (sata_error & 0x00680000) ? 1 : 0; + printk(KERN_WARNING "%s: sata_error = 0x%08x, " + "watchdog = %d, %s\n", + drive->name, sata_error, watchdog, __func__); + } else + watchdog = (ext_stat & 0x8000) ? 1 : 0; + + ext_stat >>= 16; + if (!(ext_stat & 0x0404) && !watchdog) + return 0; + } + + /* return 1 if INTR asserted */ + if (readb((void __iomem *)(hwif->dma_base + ATA_DMA_STATUS)) & 4) + return 1; + + /* return 1 if Device INTR asserted */ + if (readb((void __iomem *)addr) & 8) + return 0; /* return 1; */ + + return 0; +} + +static int siimage_dma_test_irq(ide_drive_t *drive) +{ + if (drive->hwif->host_flags & IDE_HFLAG_MMIO) + return siimage_mmio_dma_test_irq(drive); + else + return siimage_io_dma_test_irq(drive); +} + +/** + * sil_sata_reset_poll - wait for SATA reset + * @drive: drive we are resetting + * + * Poll the SATA phy and see whether it has come back from the dead + * yet. + */ + +static int sil_sata_reset_poll(ide_drive_t *drive) +{ + ide_hwif_t *hwif = drive->hwif; + void __iomem *sata_status_addr + = (void __iomem *)hwif->sata_scr[SATA_STATUS_OFFSET]; + + if (sata_status_addr) { + /* SATA Status is available only when in MMIO mode */ + u32 sata_stat = readl(sata_status_addr); + + if ((sata_stat & 0x03) != 0x03) { + printk(KERN_WARNING "%s: reset phy dead, status=0x%08x\n", + hwif->name, sata_stat); + return -ENXIO; + } + } + + return 0; +} + +/** + * sil_sata_pre_reset - reset hook + * @drive: IDE device being reset + * + * For the SATA devices we need to handle recalibration/geometry + * differently + */ + +static void sil_sata_pre_reset(ide_drive_t *drive) +{ + if (drive->media == ide_disk) { + drive->special.b.set_geometry = 0; + drive->special.b.recalibrate = 0; + } +} + +/** + * init_chipset_siimage - set up an SI device + * @dev: PCI device + * + * Perform the initial PCI set up for this device. Attempt to switch + * to 133 MHz clocking if the system isn't already set up to do it. + */ + +static unsigned int init_chipset_siimage(struct pci_dev *dev) +{ + struct ide_host *host = pci_get_drvdata(dev); + void __iomem *ioaddr = host->host_priv; + unsigned long base, scsc_addr; + u8 rev = dev->revision, tmp; + + pci_write_config_byte(dev, PCI_CACHE_LINE_SIZE, rev ? 1 : 255); + + if (ioaddr) + pci_set_master(dev); + + base = (unsigned long)ioaddr; + + if (ioaddr && pdev_is_sata(dev)) { + u32 tmp32, irq_mask; + + /* make sure IDE0/1 interrupts are not masked */ + irq_mask = (1 << 22) | (1 << 23); + tmp32 = readl(ioaddr + 0x48); + if (tmp32 & irq_mask) { + tmp32 &= ~irq_mask; + writel(tmp32, ioaddr + 0x48); + readl(ioaddr + 0x48); /* flush */ + } + writel(0, ioaddr + 0x148); + writel(0, ioaddr + 0x1C8); + } + + sil_iowrite8(dev, 0, base ? (base + 0xB4) : 0x80); + sil_iowrite8(dev, 0, base ? (base + 0xF4) : 0x84); + + scsc_addr = base ? (base + 0x4A) : 0x8A; + tmp = sil_ioread8(dev, scsc_addr); + + switch (tmp & 0x30) { + case 0x00: + /* On 100 MHz clocking, try and switch to 133 MHz */ + sil_iowrite8(dev, tmp | 0x10, scsc_addr); + break; + case 0x30: + /* Clocking is disabled, attempt to force 133MHz clocking. */ + sil_iowrite8(dev, tmp & ~0x20, scsc_addr); + case 0x10: + /* On 133Mhz clocking. */ + break; + case 0x20: + /* On PCIx2 clocking. */ + break; + } + + tmp = sil_ioread8(dev, scsc_addr); + + sil_iowrite8 (dev, 0x72, base + 0xA1); + sil_iowrite16(dev, 0x328A, base + 0xA2); + sil_iowrite32(dev, 0x62DD62DD, base + 0xA4); + sil_iowrite32(dev, 0x43924392, base + 0xA8); + sil_iowrite32(dev, 0x40094009, base + 0xAC); + sil_iowrite8 (dev, 0x72, base ? (base + 0xE1) : 0xB1); + sil_iowrite16(dev, 0x328A, base ? (base + 0xE2) : 0xB2); + sil_iowrite32(dev, 0x62DD62DD, base ? (base + 0xE4) : 0xB4); + sil_iowrite32(dev, 0x43924392, base ? (base + 0xE8) : 0xB8); + sil_iowrite32(dev, 0x40094009, base ? (base + 0xEC) : 0xBC); + + if (base && pdev_is_sata(dev)) { + writel(0xFFFF0000, ioaddr + 0x108); + writel(0xFFFF0000, ioaddr + 0x188); + writel(0x00680000, ioaddr + 0x148); + writel(0x00680000, ioaddr + 0x1C8); + } + + /* report the clocking mode of the controller */ + if (!pdev_is_sata(dev)) { + static const char *clk_str[] = + { "== 100", "== 133", "== 2X PCI", "DISABLED!" }; + + tmp >>= 4; + printk(KERN_INFO DRV_NAME " %s: BASE CLOCK %s\n", + pci_name(dev), clk_str[tmp & 3]); + } + + return 0; +} + +/** + * init_mmio_iops_siimage - set up the iops for MMIO + * @hwif: interface to set up + * + * The basic setup here is fairly simple, we can use standard MMIO + * operations. However we do have to set the taskfile register offsets + * by hand as there isn't a standard defined layout for them this time. + * + * The hardware supports buffered taskfiles and also some rather nice + * extended PRD tables. For better SI3112 support use the libata driver + */ + +static void __devinit init_mmio_iops_siimage(ide_hwif_t *hwif) +{ + struct pci_dev *dev = to_pci_dev(hwif->dev); + struct ide_host *host = pci_get_drvdata(dev); + void *addr = host->host_priv; + u8 ch = hwif->channel; + struct ide_io_ports *io_ports = &hwif->io_ports; + unsigned long base; + + /* + * Fill in the basic hwif bits + */ + hwif->host_flags |= IDE_HFLAG_MMIO; + + hwif->hwif_data = addr; + + /* + * Now set up the hw. We have to do this ourselves as the + * MMIO layout isn't the same as the standard port based I/O. + */ + memset(io_ports, 0, sizeof(*io_ports)); + + base = (unsigned long)addr; + if (ch) + base += 0xC0; + else + base += 0x80; + + /* + * The buffered task file doesn't have status/control, so we + * can't currently use it sanely since we want to use LBA48 mode. + */ + io_ports->data_addr = base; + io_ports->error_addr = base + 1; + io_ports->nsect_addr = base + 2; + io_ports->lbal_addr = base + 3; + io_ports->lbam_addr = base + 4; + io_ports->lbah_addr = base + 5; + io_ports->device_addr = base + 6; + io_ports->status_addr = base + 7; + io_ports->ctl_addr = base + 10; + + if (pdev_is_sata(dev)) { + base = (unsigned long)addr; + if (ch) + base += 0x80; + hwif->sata_scr[SATA_STATUS_OFFSET] = base + 0x104; + hwif->sata_scr[SATA_ERROR_OFFSET] = base + 0x108; + hwif->sata_scr[SATA_CONTROL_OFFSET] = base + 0x100; + } + + hwif->irq = dev->irq; + + hwif->dma_base = (unsigned long)addr + (ch ? 0x08 : 0x00); +} + +static int is_dev_seagate_sata(ide_drive_t *drive) +{ + const char *s = (const char *)&drive->id[ATA_ID_PROD]; + unsigned len = strnlen(s, ATA_ID_PROD_LEN); + + if ((len > 4) && (!memcmp(s, "ST", 2))) + if ((!memcmp(s + len - 2, "AS", 2)) || + (!memcmp(s + len - 3, "ASL", 3))) { + printk(KERN_INFO "%s: applying pessimistic Seagate " + "errata fix\n", drive->name); + return 1; + } + + return 0; +} + +/** + * sil_quirkproc - post probe fixups + * @drive: drive + * + * Called after drive probe we use this to decide whether the + * Seagate fixup must be applied. This used to be in init_iops but + * that can occur before we know what drives are present. + */ + +static void sil_quirkproc(ide_drive_t *drive) +{ + ide_hwif_t *hwif = drive->hwif; + + /* Try and rise the rqsize */ + if (!is_sata(hwif) || !is_dev_seagate_sata(drive)) + hwif->rqsize = 128; +} + +/** + * init_iops_siimage - set up iops + * @hwif: interface to set up + * + * Do the basic setup for the SIIMAGE hardware interface + * and then do the MMIO setup if we can. This is the first + * look in we get for setting up the hwif so that we + * can get the iops right before using them. + */ + +static void __devinit init_iops_siimage(ide_hwif_t *hwif) +{ + struct pci_dev *dev = to_pci_dev(hwif->dev); + struct ide_host *host = pci_get_drvdata(dev); + + hwif->hwif_data = NULL; + + /* Pessimal until we finish probing */ + hwif->rqsize = 15; + + if (host->host_priv) + init_mmio_iops_siimage(hwif); +} + +/** + * sil_cable_detect - cable detection + * @hwif: interface to check + * + * Check for the presence of an ATA66 capable cable on the interface. + */ + +static u8 sil_cable_detect(ide_hwif_t *hwif) +{ + struct pci_dev *dev = to_pci_dev(hwif->dev); + unsigned long addr = siimage_selreg(hwif, 0); + u8 ata66 = sil_ioread8(dev, addr); + + return (ata66 & 0x01) ? ATA_CBL_PATA80 : ATA_CBL_PATA40; +} + +static const struct ide_port_ops sil_pata_port_ops = { + .set_pio_mode = sil_set_pio_mode, + .set_dma_mode = sil_set_dma_mode, + .quirkproc = sil_quirkproc, + .udma_filter = sil_pata_udma_filter, + .cable_detect = sil_cable_detect, +}; + +static const struct ide_port_ops sil_sata_port_ops = { + .set_pio_mode = sil_set_pio_mode, + .set_dma_mode = sil_set_dma_mode, + .reset_poll = sil_sata_reset_poll, + .pre_reset = sil_sata_pre_reset, + .quirkproc = sil_quirkproc, + .udma_filter = sil_sata_udma_filter, + .cable_detect = sil_cable_detect, +}; + +static const struct ide_dma_ops sil_dma_ops = { + .dma_host_set = ide_dma_host_set, + .dma_setup = ide_dma_setup, + .dma_exec_cmd = ide_dma_exec_cmd, + .dma_start = ide_dma_start, + .dma_end = ide_dma_end, + .dma_test_irq = siimage_dma_test_irq, + .dma_timeout = ide_dma_timeout, + .dma_lost_irq = ide_dma_lost_irq, +}; + +#define DECLARE_SII_DEV(p_ops) \ + { \ + .name = DRV_NAME, \ + .init_chipset = init_chipset_siimage, \ + .init_iops = init_iops_siimage, \ + .port_ops = p_ops, \ + .dma_ops = &sil_dma_ops, \ + .pio_mask = ATA_PIO4, \ + .mwdma_mask = ATA_MWDMA2, \ + .udma_mask = ATA_UDMA6, \ + } + +static const struct ide_port_info siimage_chipsets[] __devinitdata = { + /* 0: SiI680 */ DECLARE_SII_DEV(&sil_pata_port_ops), + /* 1: SiI3112 */ DECLARE_SII_DEV(&sil_sata_port_ops) +}; + +/** + * siimage_init_one - PCI layer discovery entry + * @dev: PCI device + * @id: ident table entry + * + * Called by the PCI code when it finds an SiI680 or SiI3112 controller. + * We then use the IDE PCI generic helper to do most of the work. + */ + +static int __devinit siimage_init_one(struct pci_dev *dev, + const struct pci_device_id *id) +{ + void __iomem *ioaddr = NULL; + resource_size_t bar5 = pci_resource_start(dev, 5); + unsigned long barsize = pci_resource_len(dev, 5); + int rc; + struct ide_port_info d; + u8 idx = id->driver_data; + u8 BA5_EN; + + d = siimage_chipsets[idx]; + + if (idx) { + static int first = 1; + + if (first) { + printk(KERN_INFO DRV_NAME ": For full SATA support you " + "should use the libata sata_sil module.\n"); + first = 0; + } + + d.host_flags |= IDE_HFLAG_NO_ATAPI_DMA; + } + + rc = pci_enable_device(dev); + if (rc) + return rc; + + pci_read_config_byte(dev, 0x8A, &BA5_EN); + if ((BA5_EN & 0x01) || bar5) { + /* + * Drop back to PIO if we can't map the MMIO. Some systems + * seem to get terminally confused in the PCI spaces. + */ + if (!request_mem_region(bar5, barsize, d.name)) { + printk(KERN_WARNING DRV_NAME " %s: MMIO ports not " + "available\n", pci_name(dev)); + } else { + ioaddr = pci_ioremap_bar(dev, 5); + if (ioaddr == NULL) + release_mem_region(bar5, barsize); + } + } + + rc = ide_pci_init_one(dev, &d, ioaddr); + if (rc) { + if (ioaddr) { + iounmap(ioaddr); + release_mem_region(bar5, barsize); + } + pci_disable_device(dev); + } + + return rc; +} + +static void __devexit siimage_remove(struct pci_dev *dev) +{ + struct ide_host *host = pci_get_drvdata(dev); + void __iomem *ioaddr = host->host_priv; + + ide_pci_remove(dev); + + if (ioaddr) { + resource_size_t bar5 = pci_resource_start(dev, 5); + unsigned long barsize = pci_resource_len(dev, 5); + + iounmap(ioaddr); + release_mem_region(bar5, barsize); + } + + pci_disable_device(dev); +} + +static const struct pci_device_id siimage_pci_tbl[] = { + { PCI_VDEVICE(CMD, PCI_DEVICE_ID_SII_680), 0 }, +#ifdef CONFIG_BLK_DEV_IDE_SATA + { PCI_VDEVICE(CMD, PCI_DEVICE_ID_SII_3112), 1 }, + { PCI_VDEVICE(CMD, PCI_DEVICE_ID_SII_1210SA), 1 }, +#endif + { 0, }, +}; +MODULE_DEVICE_TABLE(pci, siimage_pci_tbl); + +static struct pci_driver siimage_pci_driver = { + .name = "SiI_IDE", + .id_table = siimage_pci_tbl, + .probe = siimage_init_one, + .remove = __devexit_p(siimage_remove), + .suspend = ide_pci_suspend, + .resume = ide_pci_resume, +}; + +static int __init siimage_ide_init(void) +{ + return ide_pci_register_driver(&siimage_pci_driver); +} + +static void __exit siimage_ide_exit(void) +{ + pci_unregister_driver(&siimage_pci_driver); +} + +module_init(siimage_ide_init); +module_exit(siimage_ide_exit); + +MODULE_AUTHOR("Andre Hedrick, Alan Cox"); +MODULE_DESCRIPTION("PCI driver module for SiI IDE"); +MODULE_LICENSE("GPL"); |