diff options
Diffstat (limited to 'drivers/i2c/busses')
58 files changed, 670 insertions, 418 deletions
diff --git a/drivers/i2c/busses/i2c-altera.c b/drivers/i2c/busses/i2c-altera.c index 1de23b4f3809..20ef63820c77 100644 --- a/drivers/i2c/busses/i2c-altera.c +++ b/drivers/i2c/busses/i2c-altera.c @@ -147,7 +147,7 @@ static void altr_i2c_init(struct altr_i2c_dev *idev) (ALTR_I2C_THRESHOLD << ALTR_I2C_CTRL_TCT_SHFT); u32 t_high, t_low; - if (idev->bus_clk_rate <= 100000) { + if (idev->bus_clk_rate <= I2C_MAX_STANDARD_MODE_FREQ) { tmp &= ~ALTR_I2C_CTRL_BSPEED; /* Standard mode SCL 50/50 */ t_high = divisor * 1 / 2; @@ -423,10 +423,10 @@ static int altr_i2c_probe(struct platform_device *pdev) &idev->bus_clk_rate); if (val) { dev_err(&pdev->dev, "Default to 100kHz\n"); - idev->bus_clk_rate = 100000; /* default clock rate */ + idev->bus_clk_rate = I2C_MAX_STANDARD_MODE_FREQ; /* default clock rate */ } - if (idev->bus_clk_rate > 400000) { + if (idev->bus_clk_rate > I2C_MAX_FAST_MODE_FREQ) { dev_err(&pdev->dev, "invalid clock-frequency %d\n", idev->bus_clk_rate); return -EINVAL; diff --git a/drivers/i2c/busses/i2c-amd-mp2-plat.c b/drivers/i2c/busses/i2c-amd-mp2-plat.c index f5b3f00c6559..17df9e8845b6 100644 --- a/drivers/i2c/busses/i2c-amd-mp2-plat.c +++ b/drivers/i2c/busses/i2c-amd-mp2-plat.c @@ -201,32 +201,37 @@ static int i2c_amd_resume(struct amd_i2c_common *i2c_common) } #endif +static const u32 supported_speeds[] = { + I2C_MAX_HIGH_SPEED_MODE_FREQ, + I2C_MAX_TURBO_MODE_FREQ, + I2C_MAX_FAST_MODE_PLUS_FREQ, + I2C_MAX_FAST_MODE_FREQ, + I2C_MAX_STANDARD_MODE_FREQ, +}; + static enum speed_enum i2c_amd_get_bus_speed(struct platform_device *pdev) { u32 acpi_speed; int i; - static const u32 supported_speeds[] = { - 0, 100000, 400000, 1000000, 1400000, 3400000 - }; acpi_speed = i2c_acpi_find_bus_speed(&pdev->dev); /* round down to the lowest standard speed */ - for (i = 1; i < ARRAY_SIZE(supported_speeds); i++) { - if (acpi_speed < supported_speeds[i]) + for (i = 0; i < ARRAY_SIZE(supported_speeds); i++) { + if (acpi_speed >= supported_speeds[i]) break; } - acpi_speed = supported_speeds[i - 1]; + acpi_speed = i < ARRAY_SIZE(supported_speeds) ? supported_speeds[i] : 0; switch (acpi_speed) { - case 100000: + case I2C_MAX_STANDARD_MODE_FREQ: return speed100k; - case 400000: + case I2C_MAX_FAST_MODE_FREQ: return speed400k; - case 1000000: + case I2C_MAX_FAST_MODE_PLUS_FREQ: return speed1000k; - case 1400000: + case I2C_MAX_TURBO_MODE_FREQ: return speed1400k; - case 3400000: + case I2C_MAX_HIGH_SPEED_MODE_FREQ: return speed3400k; default: return speed400k; diff --git a/drivers/i2c/busses/i2c-aspeed.c b/drivers/i2c/busses/i2c-aspeed.c index a7be6f24450b..07c1993274c5 100644 --- a/drivers/i2c/busses/i2c-aspeed.c +++ b/drivers/i2c/busses/i2c-aspeed.c @@ -997,7 +997,7 @@ static int aspeed_i2c_probe_bus(struct platform_device *pdev) if (ret < 0) { dev_err(&pdev->dev, "Could not read bus-frequency property\n"); - bus->bus_frequency = 100000; + bus->bus_frequency = I2C_MAX_STANDARD_MODE_FREQ; } match = of_match_node(aspeed_i2c_bus_of_table, pdev->dev.of_node); diff --git a/drivers/i2c/busses/i2c-at91-master.c b/drivers/i2c/busses/i2c-at91-master.c index 7a862e00b475..0aba51a7df32 100644 --- a/drivers/i2c/busses/i2c-at91-master.c +++ b/drivers/i2c/busses/i2c-at91-master.c @@ -18,11 +18,13 @@ #include <linux/dma-mapping.h> #include <linux/dmaengine.h> #include <linux/err.h> +#include <linux/gpio/consumer.h> #include <linux/i2c.h> #include <linux/interrupt.h> #include <linux/io.h> #include <linux/of.h> #include <linux/of_device.h> +#include <linux/pinctrl/consumer.h> #include <linux/platform_device.h> #include <linux/platform_data/dma-atmel.h> #include <linux/pm_runtime.h> @@ -478,6 +480,7 @@ static int at91_do_twi_transfer(struct at91_twi_dev *dev) unsigned long time_left; bool has_unre_flag = dev->pdata->has_unre_flag; bool has_alt_cmd = dev->pdata->has_alt_cmd; + struct i2c_bus_recovery_info *rinfo = &dev->rinfo; /* * WARNING: the TXCOMP bit in the Status Register is NOT a clear on @@ -637,6 +640,13 @@ error: at91_twi_write(dev, AT91_TWI_CR, AT91_TWI_THRCLR | AT91_TWI_LOCKCLR); } + + if (rinfo->get_sda && !(rinfo->get_sda(&dev->adapter))) { + dev_dbg(dev->dev, + "SDA is down; clear bus using gpio\n"); + i2c_recover_bus(&dev->adapter); + } + return ret; } @@ -806,6 +816,70 @@ error: return ret; } +static void at91_prepare_twi_recovery(struct i2c_adapter *adap) +{ + struct at91_twi_dev *dev = i2c_get_adapdata(adap); + + pinctrl_select_state(dev->pinctrl, dev->pinctrl_pins_gpio); +} + +static void at91_unprepare_twi_recovery(struct i2c_adapter *adap) +{ + struct at91_twi_dev *dev = i2c_get_adapdata(adap); + + pinctrl_select_state(dev->pinctrl, dev->pinctrl_pins_default); +} + +static int at91_init_twi_recovery_info(struct platform_device *pdev, + struct at91_twi_dev *dev) +{ + struct i2c_bus_recovery_info *rinfo = &dev->rinfo; + + dev->pinctrl = devm_pinctrl_get(&pdev->dev); + if (!dev->pinctrl || IS_ERR(dev->pinctrl)) { + dev_info(dev->dev, "can't get pinctrl, bus recovery not supported\n"); + return PTR_ERR(dev->pinctrl); + } + + dev->pinctrl_pins_default = pinctrl_lookup_state(dev->pinctrl, + PINCTRL_STATE_DEFAULT); + dev->pinctrl_pins_gpio = pinctrl_lookup_state(dev->pinctrl, + "gpio"); + rinfo->sda_gpiod = devm_gpiod_get(&pdev->dev, "sda", GPIOD_IN); + if (PTR_ERR(rinfo->sda_gpiod) == -EPROBE_DEFER) + return -EPROBE_DEFER; + + rinfo->scl_gpiod = devm_gpiod_get(&pdev->dev, "scl", + GPIOD_OUT_HIGH_OPEN_DRAIN); + if (PTR_ERR(rinfo->scl_gpiod) == -EPROBE_DEFER) + return -EPROBE_DEFER; + + if (IS_ERR(rinfo->sda_gpiod) || + IS_ERR(rinfo->scl_gpiod) || + IS_ERR(dev->pinctrl_pins_default) || + IS_ERR(dev->pinctrl_pins_gpio)) { + dev_info(&pdev->dev, "recovery information incomplete\n"); + if (!IS_ERR(rinfo->sda_gpiod)) { + gpiod_put(rinfo->sda_gpiod); + rinfo->sda_gpiod = NULL; + } + if (!IS_ERR(rinfo->scl_gpiod)) { + gpiod_put(rinfo->scl_gpiod); + rinfo->scl_gpiod = NULL; + } + return -EINVAL; + } + + dev_info(&pdev->dev, "using scl, sda for recovery\n"); + + rinfo->prepare_recovery = at91_prepare_twi_recovery; + rinfo->unprepare_recovery = at91_unprepare_twi_recovery; + rinfo->recover_bus = i2c_generic_scl_recovery; + dev->adapter.bus_recovery_info = rinfo; + + return 0; +} + int at91_twi_probe_master(struct platform_device *pdev, u32 phy_addr, struct at91_twi_dev *dev) { @@ -838,6 +912,10 @@ int at91_twi_probe_master(struct platform_device *pdev, "i2c-analog-filter"); at91_calc_twi_clock(dev); + rc = at91_init_twi_recovery_info(pdev, dev); + if (rc == -EPROBE_DEFER) + return rc; + dev->adapter.algo = &at91_twi_algorithm; dev->adapter.quirks = &at91_twi_quirks; diff --git a/drivers/i2c/busses/i2c-at91.h b/drivers/i2c/busses/i2c-at91.h index 977a67bc0f88..f57a6cab96b4 100644 --- a/drivers/i2c/busses/i2c-at91.h +++ b/drivers/i2c/busses/i2c-at91.h @@ -151,6 +151,10 @@ struct at91_twi_dev { u32 fifo_size; struct at91_twi_dma dma; bool slave_detected; + struct i2c_bus_recovery_info rinfo; + struct pinctrl *pinctrl; + struct pinctrl_state *pinctrl_pins_default; + struct pinctrl_state *pinctrl_pins_gpio; #ifdef CONFIG_I2C_AT91_SLAVE_EXPERIMENTAL unsigned smr; struct i2c_client *slave; diff --git a/drivers/i2c/busses/i2c-axxia.c b/drivers/i2c/busses/i2c-axxia.c index 0214daa913ff..be3681d08a8d 100644 --- a/drivers/i2c/busses/i2c-axxia.c +++ b/drivers/i2c/busses/i2c-axxia.c @@ -199,7 +199,7 @@ static int axxia_i2c_init(struct axxia_i2c_dev *idev) /* Enable Master Mode */ writel(0x1, idev->base + GLOBAL_CONTROL); - if (idev->bus_clk_rate <= 100000) { + if (idev->bus_clk_rate <= I2C_MAX_STANDARD_MODE_FREQ) { /* Standard mode SCL 50/50, tSU:DAT = 250 ns */ t_high = divisor * 1 / 2; t_low = divisor * 1 / 2; @@ -765,7 +765,7 @@ static int axxia_i2c_probe(struct platform_device *pdev) of_property_read_u32(np, "clock-frequency", &idev->bus_clk_rate); if (idev->bus_clk_rate == 0) - idev->bus_clk_rate = 100000; /* default clock rate */ + idev->bus_clk_rate = I2C_MAX_STANDARD_MODE_FREQ; /* default clock rate */ ret = clk_prepare_enable(idev->i2c_clk); if (ret) { diff --git a/drivers/i2c/busses/i2c-bcm-iproc.c b/drivers/i2c/busses/i2c-bcm-iproc.c index 30efb7913b2e..44be0926b566 100644 --- a/drivers/i2c/busses/i2c-bcm-iproc.c +++ b/drivers/i2c/busses/i2c-bcm-iproc.c @@ -858,25 +858,25 @@ static int bcm_iproc_i2c_cfg_speed(struct bcm_iproc_i2c_dev *iproc_i2c) if (ret < 0) { dev_info(iproc_i2c->device, "unable to interpret clock-frequency DT property\n"); - bus_speed = 100000; + bus_speed = I2C_MAX_STANDARD_MODE_FREQ; } - if (bus_speed < 100000) { + if (bus_speed < I2C_MAX_STANDARD_MODE_FREQ) { dev_err(iproc_i2c->device, "%d Hz bus speed not supported\n", bus_speed); dev_err(iproc_i2c->device, "valid speeds are 100khz and 400khz\n"); return -EINVAL; - } else if (bus_speed < 400000) { - bus_speed = 100000; + } else if (bus_speed < I2C_MAX_FAST_MODE_FREQ) { + bus_speed = I2C_MAX_STANDARD_MODE_FREQ; } else { - bus_speed = 400000; + bus_speed = I2C_MAX_FAST_MODE_FREQ; } iproc_i2c->bus_speed = bus_speed; val = iproc_i2c_rd_reg(iproc_i2c, TIM_CFG_OFFSET); val &= ~BIT(TIM_CFG_MODE_400_SHIFT); - val |= (bus_speed == 400000) << TIM_CFG_MODE_400_SHIFT; + val |= (bus_speed == I2C_MAX_FAST_MODE_FREQ) << TIM_CFG_MODE_400_SHIFT; iproc_i2c_wr_reg(iproc_i2c, TIM_CFG_OFFSET, val); dev_info(iproc_i2c->device, "bus set to %u Hz\n", bus_speed); @@ -1029,7 +1029,7 @@ static int bcm_iproc_i2c_resume(struct device *dev) /* configure to the desired bus speed */ val = iproc_i2c_rd_reg(iproc_i2c, TIM_CFG_OFFSET); val &= ~BIT(TIM_CFG_MODE_400_SHIFT); - val |= (iproc_i2c->bus_speed == 400000) << TIM_CFG_MODE_400_SHIFT; + val |= (iproc_i2c->bus_speed == I2C_MAX_FAST_MODE_FREQ) << TIM_CFG_MODE_400_SHIFT; iproc_i2c_wr_reg(iproc_i2c, TIM_CFG_OFFSET, val); bcm_iproc_i2c_enable_disable(iproc_i2c, true); diff --git a/drivers/i2c/busses/i2c-bcm-kona.c b/drivers/i2c/busses/i2c-bcm-kona.c index 4e489a9d16fb..572aebbb254e 100644 --- a/drivers/i2c/busses/i2c-bcm-kona.c +++ b/drivers/i2c/busses/i2c-bcm-kona.c @@ -722,16 +722,16 @@ static int bcm_kona_i2c_assign_bus_speed(struct bcm_kona_i2c_dev *dev) } switch (bus_speed) { - case 100000: + case I2C_MAX_STANDARD_MODE_FREQ: dev->std_cfg = &std_cfg_table[BCM_SPD_100K]; break; - case 400000: + case I2C_MAX_FAST_MODE_FREQ: dev->std_cfg = &std_cfg_table[BCM_SPD_400K]; break; - case 1000000: + case I2C_MAX_FAST_MODE_PLUS_FREQ: dev->std_cfg = &std_cfg_table[BCM_SPD_1MHZ]; break; - case 3400000: + case I2C_MAX_HIGH_SPEED_MODE_FREQ: /* Send mastercode at 100k */ dev->std_cfg = &std_cfg_table[BCM_SPD_100K]; dev->hs_cfg = &hs_cfg_table[BCM_SPD_3P4MHZ]; diff --git a/drivers/i2c/busses/i2c-bcm2835.c b/drivers/i2c/busses/i2c-bcm2835.c index 5ab901ad615d..d9b86fcc3825 100644 --- a/drivers/i2c/busses/i2c-bcm2835.c +++ b/drivers/i2c/busses/i2c-bcm2835.c @@ -439,7 +439,7 @@ static int bcm2835_i2c_probe(struct platform_device *pdev) if (ret < 0) { dev_warn(&pdev->dev, "Could not read clock-frequency property\n"); - bus_clk_rate = 100000; + bus_clk_rate = I2C_MAX_STANDARD_MODE_FREQ; } ret = clk_set_rate_exclusive(i2c_dev->bus_clk, bus_clk_rate); diff --git a/drivers/i2c/busses/i2c-brcmstb.c b/drivers/i2c/busses/i2c-brcmstb.c index 506991596b68..169a2836922d 100644 --- a/drivers/i2c/busses/i2c-brcmstb.c +++ b/drivers/i2c/busses/i2c-brcmstb.c @@ -580,6 +580,31 @@ static void brcmstb_i2c_set_bsc_reg_defaults(struct brcmstb_i2c_dev *dev) brcmstb_i2c_set_bus_speed(dev); } +#define AUTOI2C_CTRL0 0x26c +#define AUTOI2C_CTRL0_RELEASE_BSC BIT(1) + +static int bcm2711_release_bsc(struct brcmstb_i2c_dev *dev) +{ + struct platform_device *pdev = to_platform_device(dev->device); + struct resource *iomem; + void __iomem *autoi2c; + + /* Map hardware registers */ + iomem = platform_get_resource_byname(pdev, IORESOURCE_MEM, "auto-i2c"); + autoi2c = devm_ioremap_resource(&pdev->dev, iomem); + if (IS_ERR(autoi2c)) + return PTR_ERR(autoi2c); + + writel(AUTOI2C_CTRL0_RELEASE_BSC, autoi2c + AUTOI2C_CTRL0); + devm_iounmap(&pdev->dev, autoi2c); + + /* We need to reset the controller after the release */ + dev->bsc_regmap->iic_enable = 0; + bsc_writel(dev, dev->bsc_regmap->iic_enable, iic_enable); + + return 0; +} + static int brcmstb_i2c_probe(struct platform_device *pdev) { int rc = 0; @@ -609,6 +634,13 @@ static int brcmstb_i2c_probe(struct platform_device *pdev) goto probe_errorout; } + if (of_device_is_compatible(dev->device->of_node, + "brcm,bcm2711-hdmi-i2c")) { + rc = bcm2711_release_bsc(dev); + if (rc) + goto probe_errorout; + } + rc = of_property_read_string(dev->device->of_node, "interrupt-names", &int_name); if (rc < 0) @@ -705,6 +737,7 @@ static SIMPLE_DEV_PM_OPS(brcmstb_i2c_pm, brcmstb_i2c_suspend, static const struct of_device_id brcmstb_i2c_of_match[] = { {.compatible = "brcm,brcmstb-i2c"}, {.compatible = "brcm,brcmper-i2c"}, + {.compatible = "brcm,bcm2711-hdmi-i2c"}, {}, }; MODULE_DEVICE_TABLE(of, brcmstb_i2c_of_match); diff --git a/drivers/i2c/busses/i2c-cadence.c b/drivers/i2c/busses/i2c-cadence.c index 1105aee6634a..89d58f7d2a25 100644 --- a/drivers/i2c/busses/i2c-cadence.c +++ b/drivers/i2c/busses/i2c-cadence.c @@ -104,9 +104,6 @@ #define DRIVER_NAME "cdns-i2c" -#define CDNS_I2C_SPEED_MAX 400000 -#define CDNS_I2C_SPEED_DEFAULT 100000 - #define CDNS_I2C_DIVA_MAX 4 #define CDNS_I2C_DIVB_MAX 64 @@ -949,8 +946,8 @@ static int cdns_i2c_probe(struct platform_device *pdev) ret = of_property_read_u32(pdev->dev.of_node, "clock-frequency", &id->i2c_clk); - if (ret || (id->i2c_clk > CDNS_I2C_SPEED_MAX)) - id->i2c_clk = CDNS_I2C_SPEED_DEFAULT; + if (ret || (id->i2c_clk > I2C_MAX_FAST_MODE_FREQ)) + id->i2c_clk = I2C_MAX_STANDARD_MODE_FREQ; cdns_i2c_writereg(CDNS_I2C_CR_ACK_EN | CDNS_I2C_CR_NEA | CDNS_I2C_CR_MS, CDNS_I2C_CR_OFFSET); diff --git a/drivers/i2c/busses/i2c-designware-baytrail.c b/drivers/i2c/busses/i2c-designware-baytrail.c index 33da07d64494..c6a7a00e1d52 100644 --- a/drivers/i2c/busses/i2c-designware-baytrail.c +++ b/drivers/i2c/busses/i2c-designware-baytrail.c @@ -1,6 +1,6 @@ // SPDX-License-Identifier: GPL-2.0 /* - * Intel BayTrail PMIC I2C bus semaphore implementaion + * Intel BayTrail PMIC I2C bus semaphore implementation * Copyright (c) 2014, Intel Corporation. */ #include <linux/device.h> diff --git a/drivers/i2c/busses/i2c-designware-common.c b/drivers/i2c/busses/i2c-designware-common.c index 2de7452fcd6d..c70c6fc09ee3 100644 --- a/drivers/i2c/busses/i2c-designware-common.c +++ b/drivers/i2c/busses/i2c-designware-common.c @@ -102,7 +102,7 @@ int i2c_dw_set_reg_access(struct dw_i2c_dev *dev) i2c_dw_release_lock(dev); if (reg == swab32(DW_IC_COMP_TYPE_VALUE)) { - /* Configure register endianess access */ + /* Configure register endianness access */ dev->flags |= ACCESS_SWAP; } else if (reg == (DW_IC_COMP_TYPE_VALUE & 0x0000ffff)) { /* Configure register access mode 16bit */ @@ -190,10 +190,10 @@ int i2c_dw_set_sda_hold(struct dw_i2c_dev *dev) /* * Workaround for avoiding TX arbitration lost in case I2C - * slave pulls SDA down "too quickly" after falling egde of + * slave pulls SDA down "too quickly" after falling edge of * SCL by enabling non-zero SDA RX hold. Specification says it * extends incoming SDA low to high transition while SCL is - * high but it apprears to help also above issue. + * high but it appears to help also above issue. */ if (!(dev->sda_hold_time & DW_IC_SDA_HOLD_RX_MASK)) dev->sda_hold_time |= 1 << DW_IC_SDA_HOLD_RX_SHIFT; @@ -344,6 +344,28 @@ int i2c_dw_handle_tx_abort(struct dw_i2c_dev *dev) return -EIO; } +void i2c_dw_set_fifo_size(struct dw_i2c_dev *dev) +{ + u32 param, tx_fifo_depth, rx_fifo_depth; + + /* + * Try to detect the FIFO depth if not set by interface driver, + * the depth could be from 2 to 256 from HW spec. + */ + param = dw_readl(dev, DW_IC_COMP_PARAM_1); + tx_fifo_depth = ((param >> 16) & 0xff) + 1; + rx_fifo_depth = ((param >> 8) & 0xff) + 1; + if (!dev->tx_fifo_depth) { + dev->tx_fifo_depth = tx_fifo_depth; + dev->rx_fifo_depth = rx_fifo_depth; + } else if (tx_fifo_depth >= 2) { + dev->tx_fifo_depth = min_t(u32, dev->tx_fifo_depth, + tx_fifo_depth); + dev->rx_fifo_depth = min_t(u32, dev->rx_fifo_depth, + rx_fifo_depth); + } +} + u32 i2c_dw_func(struct i2c_adapter *adap) { struct dw_i2c_dev *dev = i2c_get_adapdata(adap); @@ -356,7 +378,7 @@ void i2c_dw_disable(struct dw_i2c_dev *dev) /* Disable controller */ __i2c_dw_disable(dev); - /* Disable all interupts */ + /* Disable all interrupts */ dw_writel(dev, 0, DW_IC_INTR_MASK); dw_readl(dev, DW_IC_CLR_INTR); } @@ -366,11 +388,5 @@ void i2c_dw_disable_int(struct dw_i2c_dev *dev) dw_writel(dev, 0, DW_IC_INTR_MASK); } -u32 i2c_dw_read_comp_param(struct dw_i2c_dev *dev) -{ - return dw_readl(dev, DW_IC_COMP_PARAM_1); -} -EXPORT_SYMBOL_GPL(i2c_dw_read_comp_param); - MODULE_DESCRIPTION("Synopsys DesignWare I2C bus adapter core"); MODULE_LICENSE("GPL"); diff --git a/drivers/i2c/busses/i2c-designware-core.h b/drivers/i2c/busses/i2c-designware-core.h index 67edbbde1070..b220ad64c38d 100644 --- a/drivers/i2c/busses/i2c-designware-core.h +++ b/drivers/i2c/busses/i2c-designware-core.h @@ -297,6 +297,7 @@ int i2c_dw_acquire_lock(struct dw_i2c_dev *dev); void i2c_dw_release_lock(struct dw_i2c_dev *dev); int i2c_dw_wait_bus_not_busy(struct dw_i2c_dev *dev); int i2c_dw_handle_tx_abort(struct dw_i2c_dev *dev); +void i2c_dw_set_fifo_size(struct dw_i2c_dev *dev); u32 i2c_dw_func(struct i2c_adapter *adap); void i2c_dw_disable(struct dw_i2c_dev *dev); void i2c_dw_disable_int(struct dw_i2c_dev *dev); @@ -313,7 +314,6 @@ static inline void __i2c_dw_disable_nowait(struct dw_i2c_dev *dev) void __i2c_dw_disable(struct dw_i2c_dev *dev); -extern u32 i2c_dw_read_comp_param(struct dw_i2c_dev *dev); extern int i2c_dw_probe(struct dw_i2c_dev *dev); #if IS_ENABLED(CONFIG_I2C_DESIGNWARE_SLAVE) extern int i2c_dw_probe_slave(struct dw_i2c_dev *dev); diff --git a/drivers/i2c/busses/i2c-designware-master.c b/drivers/i2c/busses/i2c-designware-master.c index e8b328242256..3a58eef20936 100644 --- a/drivers/i2c/busses/i2c-designware-master.c +++ b/drivers/i2c/busses/i2c-designware-master.c @@ -521,7 +521,7 @@ static u32 i2c_dw_read_clear_intrbits(struct dw_i2c_dev *dev) /* * The IC_INTR_STAT register just indicates "enabled" interrupts. - * Ths unmasked raw version of interrupt status bits are available + * The unmasked raw version of interrupt status bits is available * in the IC_RAW_INTR_STAT register. * * That is, @@ -698,6 +698,8 @@ int i2c_dw_probe(struct dw_i2c_dev *dev) if (ret) return ret; + i2c_dw_set_fifo_size(dev); + ret = dev->init(dev); if (ret) return ret; diff --git a/drivers/i2c/busses/i2c-designware-pcidrv.c b/drivers/i2c/busses/i2c-designware-pcidrv.c index 05b35ac33ce3..7a0b65b5b5b5 100644 --- a/drivers/i2c/busses/i2c-designware-pcidrv.c +++ b/drivers/i2c/busses/i2c-designware-pcidrv.c @@ -109,7 +109,7 @@ static int mfld_setup(struct pci_dev *pdev, struct dw_pci_controller *c) static int mrfld_setup(struct pci_dev *pdev, struct dw_pci_controller *c) { /* - * On Intel Merrifield the user visible i2c busses are enumerated + * On Intel Merrifield the user visible i2c buses are enumerated * [1..7]. So, we add 1 to shift the default range. Besides that the * first PCI slot provides 4 functions, that's why we have to add 0 to * the first slot and 4 to the next one. diff --git a/drivers/i2c/busses/i2c-designware-platdrv.c b/drivers/i2c/busses/i2c-designware-platdrv.c index 3b7d58c2fe85..c98befe2a92e 100644 --- a/drivers/i2c/busses/i2c-designware-platdrv.c +++ b/drivers/i2c/busses/i2c-designware-platdrv.c @@ -99,16 +99,16 @@ static int dw_i2c_acpi_configure(struct platform_device *pdev) dw_i2c_acpi_params(pdev, "FMCN", &dev->fs_hcnt, &dev->fs_lcnt, &fs_ht); switch (t->bus_freq_hz) { - case 100000: + case I2C_MAX_STANDARD_MODE_FREQ: dev->sda_hold_time = ss_ht; break; - case 1000000: + case I2C_MAX_FAST_MODE_PLUS_FREQ: dev->sda_hold_time = fp_ht; break; - case 3400000: + case I2C_MAX_HIGH_SPEED_MODE_FREQ: dev->sda_hold_time = hs_ht; break; - case 400000: + case I2C_MAX_FAST_MODE_FREQ: default: dev->sda_hold_time = fs_ht; break; @@ -198,10 +198,10 @@ static void i2c_dw_configure_master(struct dw_i2c_dev *dev) dev->mode = DW_IC_MASTER; switch (t->bus_freq_hz) { - case 100000: + case I2C_MAX_STANDARD_MODE_FREQ: dev->master_cfg |= DW_IC_CON_SPEED_STD; break; - case 3400000: + case I2C_MAX_HIGH_SPEED_MODE_FREQ: dev->master_cfg |= DW_IC_CON_SPEED_HIGH; break; default: @@ -219,28 +219,6 @@ static void i2c_dw_configure_slave(struct dw_i2c_dev *dev) dev->mode = DW_IC_SLAVE; } -static void dw_i2c_set_fifo_size(struct dw_i2c_dev *dev) -{ - u32 param, tx_fifo_depth, rx_fifo_depth; - - /* - * Try to detect the FIFO depth if not set by interface driver, - * the depth could be from 2 to 256 from HW spec. - */ - param = i2c_dw_read_comp_param(dev); - tx_fifo_depth = ((param >> 16) & 0xff) + 1; - rx_fifo_depth = ((param >> 8) & 0xff) + 1; - if (!dev->tx_fifo_depth) { - dev->tx_fifo_depth = tx_fifo_depth; - dev->rx_fifo_depth = rx_fifo_depth; - } else if (tx_fifo_depth >= 2) { - dev->tx_fifo_depth = min_t(u32, dev->tx_fifo_depth, - tx_fifo_depth); - dev->rx_fifo_depth = min_t(u32, dev->rx_fifo_depth, - rx_fifo_depth); - } -} - static void dw_i2c_plat_pm_cleanup(struct dw_i2c_dev *dev) { pm_runtime_disable(dev->dev); @@ -249,6 +227,13 @@ static void dw_i2c_plat_pm_cleanup(struct dw_i2c_dev *dev) pm_runtime_put_noidle(dev->dev); } +static const u32 supported_speeds[] = { + I2C_MAX_HIGH_SPEED_MODE_FREQ, + I2C_MAX_FAST_MODE_PLUS_FREQ, + I2C_MAX_FAST_MODE_FREQ, + I2C_MAX_STANDARD_MODE_FREQ, +}; + static int dw_i2c_plat_probe(struct platform_device *pdev) { struct dw_i2c_platform_data *pdata = dev_get_platdata(&pdev->dev); @@ -258,9 +243,6 @@ static int dw_i2c_plat_probe(struct platform_device *pdev) u32 acpi_speed; struct resource *mem; int i, irq, ret; - static const int supported_speeds[] = { - 0, 100000, 400000, 1000000, 3400000 - }; irq = platform_get_irq(pdev, 0); if (irq < 0) @@ -296,11 +278,11 @@ static int dw_i2c_plat_probe(struct platform_device *pdev) * Some DSTDs use a non standard speed, round down to the lowest * standard speed. */ - for (i = 1; i < ARRAY_SIZE(supported_speeds); i++) { - if (acpi_speed < supported_speeds[i]) + for (i = 0; i < ARRAY_SIZE(supported_speeds); i++) { + if (acpi_speed >= supported_speeds[i]) break; } - acpi_speed = supported_speeds[i - 1]; + acpi_speed = i < ARRAY_SIZE(supported_speeds) ? supported_speeds[i] : 0; /* * Find bus speed from the "clock-frequency" device property, ACPI @@ -311,7 +293,7 @@ static int dw_i2c_plat_probe(struct platform_device *pdev) else if (acpi_speed || t->bus_freq_hz) t->bus_freq_hz = max(t->bus_freq_hz, acpi_speed); else - t->bus_freq_hz = 400000; + t->bus_freq_hz = I2C_MAX_FAST_MODE_FREQ; dev->flags |= (uintptr_t)device_get_match_data(&pdev->dev); @@ -325,8 +307,11 @@ static int dw_i2c_plat_probe(struct platform_device *pdev) * Only standard mode at 100kHz, fast mode at 400kHz, * fast mode plus at 1MHz and high speed mode at 3.4MHz are supported. */ - if (t->bus_freq_hz != 100000 && t->bus_freq_hz != 400000 && - t->bus_freq_hz != 1000000 && t->bus_freq_hz != 3400000) { + for (i = 0; i < ARRAY_SIZE(supported_speeds); i++) { + if (t->bus_freq_hz == supported_speeds[i]) + break; + } + if (i == ARRAY_SIZE(supported_speeds)) { dev_err(&pdev->dev, "%d Hz is unsupported, only 100kHz, 400kHz, 1MHz and 3.4MHz are supported\n", t->bus_freq_hz); @@ -362,8 +347,6 @@ static int dw_i2c_plat_probe(struct platform_device *pdev) div_u64(clk_khz * t->sda_hold_ns + 500000, 1000000); } - dw_i2c_set_fifo_size(dev); - adap = &dev->adapter; adap->owner = THIS_MODULE; adap->class = I2C_CLASS_DEPRECATED; diff --git a/drivers/i2c/busses/i2c-designware-slave.c b/drivers/i2c/busses/i2c-designware-slave.c index f5f001738df5..f5ecf76c0d02 100644 --- a/drivers/i2c/busses/i2c-designware-slave.c +++ b/drivers/i2c/busses/i2c-designware-slave.c @@ -107,7 +107,7 @@ static u32 i2c_dw_read_clear_intrbits_slave(struct dw_i2c_dev *dev) /* * The IC_INTR_STAT register just indicates "enabled" interrupts. - * Ths unmasked raw version of interrupt status bits are available + * The unmasked raw version of interrupt status bits is available * in the IC_RAW_INTR_STAT register. * * That is, @@ -260,6 +260,8 @@ int i2c_dw_probe_slave(struct dw_i2c_dev *dev) if (ret) return ret; + i2c_dw_set_fifo_size(dev); + ret = dev->init(dev); if (ret) return ret; diff --git a/drivers/i2c/busses/i2c-digicolor.c b/drivers/i2c/busses/i2c-digicolor.c index 3adf72540db1..056a5c4f0833 100644 --- a/drivers/i2c/busses/i2c-digicolor.c +++ b/drivers/i2c/busses/i2c-digicolor.c @@ -18,7 +18,6 @@ #include <linux/of.h> #include <linux/platform_device.h> -#define DEFAULT_FREQ 100000 #define TIMEOUT_MS 100 #define II_CONTROL 0x0 @@ -300,7 +299,7 @@ static int dc_i2c_probe(struct platform_device *pdev) if (of_property_read_u32(pdev->dev.of_node, "clock-frequency", &i2c->frequency)) - i2c->frequency = DEFAULT_FREQ; + i2c->frequency = I2C_MAX_STANDARD_MODE_FREQ; i2c->dev = &pdev->dev; platform_set_drvdata(pdev, i2c); diff --git a/drivers/i2c/busses/i2c-diolan-u2c.c b/drivers/i2c/busses/i2c-diolan-u2c.c index 382f105e0fe3..b48b7888936f 100644 --- a/drivers/i2c/busses/i2c-diolan-u2c.c +++ b/drivers/i2c/busses/i2c-diolan-u2c.c @@ -64,8 +64,6 @@ #define U2C_I2C_SPEED_2KHZ 242 /* 2 kHz, minimum speed */ #define U2C_I2C_SPEED(f) ((DIV_ROUND_UP(1000000, (f)) - 10) / 2 + 1) -#define U2C_I2C_FREQ_FAST 400000 -#define U2C_I2C_FREQ_STD 100000 #define U2C_I2C_FREQ(s) (1000000 / (2 * (s - 1) + 10)) #define DIOLAN_USB_TIMEOUT 100 /* in ms */ @@ -87,7 +85,7 @@ struct i2c_diolan_u2c { int ocount; /* Number of enqueued messages */ }; -static uint frequency = U2C_I2C_FREQ_STD; /* I2C clock frequency in Hz */ +static uint frequency = I2C_MAX_STANDARD_MODE_FREQ; /* I2C clock frequency in Hz */ module_param(frequency, uint, S_IRUGO | S_IWUSR); MODULE_PARM_DESC(frequency, "I2C clock frequency in hertz"); @@ -299,12 +297,12 @@ static int diolan_init(struct i2c_diolan_u2c *dev) { int speed, ret; - if (frequency >= 200000) { + if (frequency >= 2 * I2C_MAX_STANDARD_MODE_FREQ) { speed = U2C_I2C_SPEED_FAST; - frequency = U2C_I2C_FREQ_FAST; - } else if (frequency >= 100000 || frequency == 0) { + frequency = I2C_MAX_FAST_MODE_FREQ; + } else if (frequency >= I2C_MAX_STANDARD_MODE_FREQ || frequency == 0) { speed = U2C_I2C_SPEED_STD; - frequency = U2C_I2C_FREQ_STD; + frequency = I2C_MAX_STANDARD_MODE_FREQ; } else { speed = U2C_I2C_SPEED(frequency); if (speed > U2C_I2C_SPEED_2KHZ) diff --git a/drivers/i2c/busses/i2c-efm32.c b/drivers/i2c/busses/i2c-efm32.c index a8c6323e7f44..18cca8f56da8 100644 --- a/drivers/i2c/busses/i2c-efm32.c +++ b/drivers/i2c/busses/i2c-efm32.c @@ -388,7 +388,7 @@ static int efm32_i2c_probe(struct platform_device *pdev) if (!ret) { dev_dbg(&pdev->dev, "using frequency %u\n", frequency); } else { - frequency = 100000; + frequency = I2C_MAX_STANDARD_MODE_FREQ; dev_info(&pdev->dev, "defaulting to 100 kHz\n"); } ddata->frequency = frequency; diff --git a/drivers/i2c/busses/i2c-exynos5.c b/drivers/i2c/busses/i2c-exynos5.c index e7514c16b756..527030953ba1 100644 --- a/drivers/i2c/busses/i2c-exynos5.c +++ b/drivers/i2c/busses/i2c-exynos5.c @@ -164,13 +164,6 @@ #define HSI2C_MASTER_ID(x) ((x & 0xff) << 24) #define MASTER_ID(x) ((x & 0x7) + 0x08) -/* - * Controller operating frequency, timing values for operation - * are calculated against this frequency - */ -#define HSI2C_HS_TX_CLOCK 1000000 -#define HSI2C_FS_TX_CLOCK 100000 - #define EXYNOS5_I2C_TIMEOUT (msecs_to_jiffies(100)) enum i2c_type_exynos { @@ -264,6 +257,9 @@ static void exynos5_i2c_clr_pend_irq(struct exynos5_i2c *i2c) * exynos5_i2c_set_timing: updates the registers with appropriate * timing values calculated * + * Timing values for operation are calculated against either 100kHz + * or 1MHz controller operating frequency. + * * Returns 0 on success, -EINVAL if the cycle length cannot * be calculated. */ @@ -281,7 +277,7 @@ static int exynos5_i2c_set_timing(struct exynos5_i2c *i2c, bool hs_timings) unsigned int t_ftl_cycle; unsigned int clkin = clk_get_rate(i2c->clk); unsigned int op_clk = hs_timings ? i2c->op_clock : - (i2c->op_clock >= HSI2C_HS_TX_CLOCK) ? HSI2C_FS_TX_CLOCK : + (i2c->op_clock >= I2C_MAX_FAST_MODE_PLUS_FREQ) ? I2C_MAX_STANDARD_MODE_FREQ : i2c->op_clock; int div, clk_cycle, temp; @@ -353,7 +349,7 @@ static int exynos5_hsi2c_clock_setup(struct exynos5_i2c *i2c) /* always set Fast Speed timings */ int ret = exynos5_i2c_set_timing(i2c, false); - if (ret < 0 || i2c->op_clock < HSI2C_HS_TX_CLOCK) + if (ret < 0 || i2c->op_clock < I2C_MAX_FAST_MODE_PLUS_FREQ) return ret; return exynos5_i2c_set_timing(i2c, true); @@ -376,7 +372,7 @@ static void exynos5_i2c_init(struct exynos5_i2c *i2c) i2c->regs + HSI2C_CTL); writel(HSI2C_TRAILING_COUNT, i2c->regs + HSI2C_TRAILIG_CTL); - if (i2c->op_clock >= HSI2C_HS_TX_CLOCK) { + if (i2c->op_clock >= I2C_MAX_FAST_MODE_PLUS_FREQ) { writel(HSI2C_MASTER_ID(MASTER_ID(i2c->adap.nr)), i2c->regs + HSI2C_ADDR); i2c_conf |= HSI2C_HS_MODE; @@ -748,7 +744,7 @@ static int exynos5_i2c_probe(struct platform_device *pdev) return -ENOMEM; if (of_property_read_u32(np, "clock-frequency", &i2c->op_clock)) - i2c->op_clock = HSI2C_FS_TX_CLOCK; + i2c->op_clock = I2C_MAX_STANDARD_MODE_FREQ; strlcpy(i2c->adap.name, "exynos5-i2c", sizeof(i2c->adap.name)); i2c->adap.owner = THIS_MODULE; diff --git a/drivers/i2c/busses/i2c-hix5hd2.c b/drivers/i2c/busses/i2c-hix5hd2.c index 224f830f77f9..6610304b6dc6 100644 --- a/drivers/i2c/busses/i2c-hix5hd2.c +++ b/drivers/i2c/busses/i2c-hix5hd2.c @@ -68,8 +68,6 @@ #define I2C_ARBITRATE_INTR BIT(1) #define I2C_OVER_INTR BIT(0) -#define HIX5I2C_MAX_FREQ 400000 /* 400k */ - enum hix5hd2_i2c_state { HIX5I2C_STAT_RW_ERR = -1, HIX5I2C_STAT_INIT, @@ -400,12 +398,12 @@ static int hix5hd2_i2c_probe(struct platform_device *pdev) if (of_property_read_u32(np, "clock-frequency", &freq)) { /* use 100k as default value */ - priv->freq = 100000; + priv->freq = I2C_MAX_STANDARD_MODE_FREQ; } else { - if (freq > HIX5I2C_MAX_FREQ) { - priv->freq = HIX5I2C_MAX_FREQ; + if (freq > I2C_MAX_FAST_MODE_FREQ) { + priv->freq = I2C_MAX_FAST_MODE_FREQ; dev_warn(priv->dev, "use max freq %d instead\n", - HIX5I2C_MAX_FREQ); + I2C_MAX_FAST_MODE_FREQ); } else { priv->freq = freq; } diff --git a/drivers/i2c/busses/i2c-img-scb.c b/drivers/i2c/busses/i2c-img-scb.c index 20a4fbc53007..422097a31c95 100644 --- a/drivers/i2c/busses/i2c-img-scb.c +++ b/drivers/i2c/busses/i2c-img-scb.c @@ -304,7 +304,7 @@ static struct img_i2c_timings timings[] = { /* Standard mode */ { .name = "standard", - .max_bitrate = 100000, + .max_bitrate = I2C_MAX_STANDARD_MODE_FREQ, .tckh = 4000, .tckl = 4700, .tsdh = 4700, @@ -316,7 +316,7 @@ static struct img_i2c_timings timings[] = { /* Fast mode */ { .name = "fast", - .max_bitrate = 400000, + .max_bitrate = I2C_MAX_FAST_MODE_FREQ, .tckh = 600, .tckl = 1300, .tsdh = 600, diff --git a/drivers/i2c/busses/i2c-imx-lpi2c.c b/drivers/i2c/busses/i2c-imx-lpi2c.c index c92b56485fa6..94743ba581fe 100644 --- a/drivers/i2c/busses/i2c-imx-lpi2c.c +++ b/drivers/i2c/busses/i2c-imx-lpi2c.c @@ -75,12 +75,6 @@ #define I2C_CLK_RATIO 2 #define CHUNK_DATA 256 -#define LPI2C_DEFAULT_RATE 100000 -#define STARDARD_MAX_BITRATE 400000 -#define FAST_MAX_BITRATE 1000000 -#define FAST_PLUS_MAX_BITRATE 3400000 -#define HIGHSPEED_MAX_BITRATE 5000000 - #define I2C_PM_TIMEOUT 10 /* ms */ enum lpi2c_imx_mode { @@ -152,13 +146,13 @@ static void lpi2c_imx_set_mode(struct lpi2c_imx_struct *lpi2c_imx) unsigned int bitrate = lpi2c_imx->bitrate; enum lpi2c_imx_mode mode; - if (bitrate < STARDARD_MAX_BITRATE) + if (bitrate < I2C_MAX_FAST_MODE_FREQ) mode = STANDARD; - else if (bitrate < FAST_MAX_BITRATE) + else if (bitrate < I2C_MAX_FAST_MODE_PLUS_FREQ) mode = FAST; - else if (bitrate < FAST_PLUS_MAX_BITRATE) + else if (bitrate < I2C_MAX_HIGH_SPEED_MODE_FREQ) mode = FAST_PLUS; - else if (bitrate < HIGHSPEED_MAX_BITRATE) + else if (bitrate < I2C_MAX_ULTRA_FAST_MODE_FREQ) mode = HS; else mode = ULTRA_FAST; @@ -578,7 +572,7 @@ static int lpi2c_imx_probe(struct platform_device *pdev) ret = of_property_read_u32(pdev->dev.of_node, "clock-frequency", &lpi2c_imx->bitrate); if (ret) - lpi2c_imx->bitrate = LPI2C_DEFAULT_RATE; + lpi2c_imx->bitrate = I2C_MAX_STANDARD_MODE_FREQ; ret = devm_request_irq(&pdev->dev, irq, lpi2c_imx_isr, 0, pdev->name, lpi2c_imx); diff --git a/drivers/i2c/busses/i2c-imx.c b/drivers/i2c/busses/i2c-imx.c index a3b61336fe55..0ab5381aa012 100644 --- a/drivers/i2c/busses/i2c-imx.c +++ b/drivers/i2c/busses/i2c-imx.c @@ -34,6 +34,7 @@ #include <linux/init.h> #include <linux/interrupt.h> #include <linux/io.h> +#include <linux/iopoll.h> #include <linux/kernel.h> #include <linux/module.h> #include <linux/of.h> @@ -49,9 +50,6 @@ /* This will be the driver name the kernel reports */ #define DRIVER_NAME "imx-i2c" -/* Default value */ -#define IMX_I2C_BIT_RATE 100000 /* 100kHz */ - /* * Enable DMA if transfer byte size is bigger than this threshold. * As the hardware request, it must bigger than 4 bytes.\ @@ -414,7 +412,7 @@ static void i2c_imx_dma_free(struct imx_i2c_struct *i2c_imx) dma->chan_using = NULL; } -static int i2c_imx_bus_busy(struct imx_i2c_struct *i2c_imx, int for_busy) +static int i2c_imx_bus_busy(struct imx_i2c_struct *i2c_imx, int for_busy, bool atomic) { unsigned long orig_jiffies = jiffies; unsigned int temp; @@ -444,15 +442,37 @@ static int i2c_imx_bus_busy(struct imx_i2c_struct *i2c_imx, int for_busy) "<%s> I2C bus is busy\n", __func__); return -ETIMEDOUT; } - schedule(); + if (atomic) + udelay(100); + else + schedule(); } return 0; } -static int i2c_imx_trx_complete(struct imx_i2c_struct *i2c_imx) +static int i2c_imx_trx_complete(struct imx_i2c_struct *i2c_imx, bool atomic) { - wait_event_timeout(i2c_imx->queue, i2c_imx->i2csr & I2SR_IIF, HZ / 10); + if (atomic) { + void __iomem *addr = i2c_imx->base + (IMX_I2C_I2SR << i2c_imx->hwdata->regshift); + unsigned int regval; + + /* + * The formula for the poll timeout is documented in the RM + * Rev.5 on page 1878: + * T_min = 10/F_scl + * Set the value hard as it is done for the non-atomic use-case. + * Use 10 kHz for the calculation since this is the minimum + * allowed SMBus frequency. Also add an offset of 100us since it + * turned out that the I2SR_IIF bit isn't set correctly within + * the minimum timeout in polling mode. + */ + readb_poll_timeout_atomic(addr, regval, regval & I2SR_IIF, 5, 1000 + 100); + i2c_imx->i2csr = regval; + imx_i2c_write_reg(0, i2c_imx, IMX_I2C_I2SR); + } else { + wait_event_timeout(i2c_imx->queue, i2c_imx->i2csr & I2SR_IIF, HZ / 10); + } if (unlikely(!(i2c_imx->i2csr & I2SR_IIF))) { dev_dbg(&i2c_imx->adapter.dev, "<%s> Timeout\n", __func__); @@ -530,7 +550,7 @@ static int i2c_imx_clk_notifier_call(struct notifier_block *nb, return NOTIFY_OK; } -static int i2c_imx_start(struct imx_i2c_struct *i2c_imx) +static int i2c_imx_start(struct imx_i2c_struct *i2c_imx, bool atomic) { unsigned int temp = 0; int result; @@ -543,23 +563,29 @@ static int i2c_imx_start(struct imx_i2c_struct *i2c_imx) imx_i2c_write_reg(i2c_imx->hwdata->i2cr_ien_opcode, i2c_imx, IMX_I2C_I2CR); /* Wait controller to be stable */ - usleep_range(50, 150); + if (atomic) + udelay(50); + else + usleep_range(50, 150); /* Start I2C transaction */ temp = imx_i2c_read_reg(i2c_imx, IMX_I2C_I2CR); temp |= I2CR_MSTA; imx_i2c_write_reg(temp, i2c_imx, IMX_I2C_I2CR); - result = i2c_imx_bus_busy(i2c_imx, 1); + result = i2c_imx_bus_busy(i2c_imx, 1, atomic); if (result) return result; temp |= I2CR_IIEN | I2CR_MTX | I2CR_TXAK; + if (atomic) + temp &= ~I2CR_IIEN; /* Disable interrupt */ + temp &= ~I2CR_DMAEN; imx_i2c_write_reg(temp, i2c_imx, IMX_I2C_I2CR); return result; } -static void i2c_imx_stop(struct imx_i2c_struct *i2c_imx) +static void i2c_imx_stop(struct imx_i2c_struct *i2c_imx, bool atomic) { unsigned int temp = 0; @@ -581,7 +607,7 @@ static void i2c_imx_stop(struct imx_i2c_struct *i2c_imx) } if (!i2c_imx->stopped) - i2c_imx_bus_busy(i2c_imx, 0); + i2c_imx_bus_busy(i2c_imx, 0, atomic); /* Disable I2C controller */ temp = i2c_imx->hwdata->i2cr_ien_opcode ^ I2CR_IEN, @@ -662,7 +688,7 @@ static int i2c_imx_dma_write(struct imx_i2c_struct *i2c_imx, /* The last data byte must be transferred by the CPU. */ imx_i2c_write_reg(msgs->buf[msgs->len-1], i2c_imx, IMX_I2C_I2DR); - result = i2c_imx_trx_complete(i2c_imx); + result = i2c_imx_trx_complete(i2c_imx, false); if (result) return result; @@ -721,7 +747,7 @@ static int i2c_imx_dma_read(struct imx_i2c_struct *i2c_imx, msgs->buf[msgs->len-2] = imx_i2c_read_reg(i2c_imx, IMX_I2C_I2DR); /* read n byte data */ - result = i2c_imx_trx_complete(i2c_imx); + result = i2c_imx_trx_complete(i2c_imx, false); if (result) return result; @@ -734,7 +760,7 @@ static int i2c_imx_dma_read(struct imx_i2c_struct *i2c_imx, temp = imx_i2c_read_reg(i2c_imx, IMX_I2C_I2CR); temp &= ~(I2CR_MSTA | I2CR_MTX); imx_i2c_write_reg(temp, i2c_imx, IMX_I2C_I2CR); - i2c_imx_bus_busy(i2c_imx, 0); + i2c_imx_bus_busy(i2c_imx, 0, false); } else { /* * For i2c master receiver repeat restart operation like: @@ -752,7 +778,8 @@ static int i2c_imx_dma_read(struct imx_i2c_struct *i2c_imx, return 0; } -static int i2c_imx_write(struct imx_i2c_struct *i2c_imx, struct i2c_msg *msgs) +static int i2c_imx_write(struct imx_i2c_struct *i2c_imx, struct i2c_msg *msgs, + bool atomic) { int i, result; @@ -761,7 +788,7 @@ static int i2c_imx_write(struct imx_i2c_struct *i2c_imx, struct i2c_msg *msgs) /* write slave address */ imx_i2c_write_reg(i2c_8bit_addr_from_msg(msgs), i2c_imx, IMX_I2C_I2DR); - result = i2c_imx_trx_complete(i2c_imx); + result = i2c_imx_trx_complete(i2c_imx, atomic); if (result) return result; result = i2c_imx_acked(i2c_imx); @@ -775,7 +802,7 @@ static int i2c_imx_write(struct imx_i2c_struct *i2c_imx, struct i2c_msg *msgs) "<%s> write byte: B%d=0x%X\n", __func__, i, msgs->buf[i]); imx_i2c_write_reg(msgs->buf[i], i2c_imx, IMX_I2C_I2DR); - result = i2c_imx_trx_complete(i2c_imx); + result = i2c_imx_trx_complete(i2c_imx, atomic); if (result) return result; result = i2c_imx_acked(i2c_imx); @@ -785,7 +812,8 @@ static int i2c_imx_write(struct imx_i2c_struct *i2c_imx, struct i2c_msg *msgs) return 0; } -static int i2c_imx_read(struct imx_i2c_struct *i2c_imx, struct i2c_msg *msgs, bool is_lastmsg) +static int i2c_imx_read(struct imx_i2c_struct *i2c_imx, struct i2c_msg *msgs, + bool is_lastmsg, bool atomic) { int i, result; unsigned int temp; @@ -798,7 +826,7 @@ static int i2c_imx_read(struct imx_i2c_struct *i2c_imx, struct i2c_msg *msgs, bo /* write slave address */ imx_i2c_write_reg(i2c_8bit_addr_from_msg(msgs), i2c_imx, IMX_I2C_I2DR); - result = i2c_imx_trx_complete(i2c_imx); + result = i2c_imx_trx_complete(i2c_imx, atomic); if (result) return result; result = i2c_imx_acked(i2c_imx); @@ -831,7 +859,7 @@ static int i2c_imx_read(struct imx_i2c_struct *i2c_imx, struct i2c_msg *msgs, bo for (i = 0; i < msgs->len; i++) { u8 len = 0; - result = i2c_imx_trx_complete(i2c_imx); + result = i2c_imx_trx_complete(i2c_imx, atomic); if (result) return result; /* @@ -859,7 +887,7 @@ static int i2c_imx_read(struct imx_i2c_struct *i2c_imx, struct i2c_msg *msgs, bo temp = imx_i2c_read_reg(i2c_imx, IMX_I2C_I2CR); temp &= ~(I2CR_MSTA | I2CR_MTX); imx_i2c_write_reg(temp, i2c_imx, IMX_I2C_I2CR); - i2c_imx_bus_busy(i2c_imx, 0); + i2c_imx_bus_busy(i2c_imx, 0, atomic); } else { /* * For i2c master receiver repeat restart operation like: @@ -890,8 +918,8 @@ static int i2c_imx_read(struct imx_i2c_struct *i2c_imx, struct i2c_msg *msgs, bo return 0; } -static int i2c_imx_xfer(struct i2c_adapter *adapter, - struct i2c_msg *msgs, int num) +static int i2c_imx_xfer_common(struct i2c_adapter *adapter, + struct i2c_msg *msgs, int num, bool atomic) { unsigned int i, temp; int result; @@ -900,16 +928,16 @@ static int i2c_imx_xfer(struct i2c_adapter *adapter, dev_dbg(&i2c_imx->adapter.dev, "<%s>\n", __func__); - result = pm_runtime_get_sync(i2c_imx->adapter.dev.parent); - if (result < 0) - goto out; - /* Start I2C transfer */ - result = i2c_imx_start(i2c_imx); + result = i2c_imx_start(i2c_imx, atomic); if (result) { - if (i2c_imx->adapter.bus_recovery_info) { + /* + * Bus recovery uses gpiod_get_value_cansleep() which is not + * allowed within atomic context. + */ + if (!atomic && i2c_imx->adapter.bus_recovery_info) { i2c_recover_bus(&i2c_imx->adapter); - result = i2c_imx_start(i2c_imx); + result = i2c_imx_start(i2c_imx, atomic); } } @@ -927,7 +955,7 @@ static int i2c_imx_xfer(struct i2c_adapter *adapter, temp = imx_i2c_read_reg(i2c_imx, IMX_I2C_I2CR); temp |= I2CR_RSTA; imx_i2c_write_reg(temp, i2c_imx, IMX_I2C_I2CR); - result = i2c_imx_bus_busy(i2c_imx, 1); + result = i2c_imx_bus_busy(i2c_imx, 1, atomic); if (result) goto fail0; } @@ -951,13 +979,14 @@ static int i2c_imx_xfer(struct i2c_adapter *adapter, (temp & I2SR_SRW ? 1 : 0), (temp & I2SR_IIF ? 1 : 0), (temp & I2SR_RXAK ? 1 : 0)); #endif - if (msgs[i].flags & I2C_M_RD) - result = i2c_imx_read(i2c_imx, &msgs[i], is_lastmsg); - else { - if (i2c_imx->dma && msgs[i].len >= DMA_THRESHOLD) + if (msgs[i].flags & I2C_M_RD) { + result = i2c_imx_read(i2c_imx, &msgs[i], is_lastmsg, atomic); + } else { + if (!atomic && + i2c_imx->dma && msgs[i].len >= DMA_THRESHOLD) result = i2c_imx_dma_write(i2c_imx, &msgs[i]); else - result = i2c_imx_write(i2c_imx, &msgs[i]); + result = i2c_imx_write(i2c_imx, &msgs[i], atomic); } if (result) goto fail0; @@ -965,18 +994,49 @@ static int i2c_imx_xfer(struct i2c_adapter *adapter, fail0: /* Stop I2C transfer */ - i2c_imx_stop(i2c_imx); - - pm_runtime_mark_last_busy(i2c_imx->adapter.dev.parent); - pm_runtime_put_autosuspend(i2c_imx->adapter.dev.parent); + i2c_imx_stop(i2c_imx, atomic); -out: dev_dbg(&i2c_imx->adapter.dev, "<%s> exit with: %s: %d\n", __func__, (result < 0) ? "error" : "success msg", (result < 0) ? result : num); return (result < 0) ? result : num; } +static int i2c_imx_xfer(struct i2c_adapter *adapter, + struct i2c_msg *msgs, int num) +{ + struct imx_i2c_struct *i2c_imx = i2c_get_adapdata(adapter); + int result; + + result = pm_runtime_get_sync(i2c_imx->adapter.dev.parent); + if (result < 0) + return result; + + result = i2c_imx_xfer_common(adapter, msgs, num, false); + + pm_runtime_mark_last_busy(i2c_imx->adapter.dev.parent); + pm_runtime_put_autosuspend(i2c_imx->adapter.dev.parent); + + return result; +} + +static int i2c_imx_xfer_atomic(struct i2c_adapter *adapter, + struct i2c_msg *msgs, int num) +{ + struct imx_i2c_struct *i2c_imx = i2c_get_adapdata(adapter); + int result; + + result = clk_enable(i2c_imx->clk); + if (result) + return result; + + result = i2c_imx_xfer_common(adapter, msgs, num, true); + + clk_disable(i2c_imx->clk); + + return result; +} + static void i2c_imx_prepare_recovery(struct i2c_adapter *adap) { struct imx_i2c_struct *i2c_imx; @@ -1049,8 +1109,9 @@ static u32 i2c_imx_func(struct i2c_adapter *adapter) } static const struct i2c_algorithm i2c_imx_algo = { - .master_xfer = i2c_imx_xfer, - .functionality = i2c_imx_func, + .master_xfer = i2c_imx_xfer, + .master_xfer_atomic = i2c_imx_xfer_atomic, + .functionality = i2c_imx_func, }; static int i2c_imx_probe(struct platform_device *pdev) @@ -1066,10 +1127,8 @@ static int i2c_imx_probe(struct platform_device *pdev) dev_dbg(&pdev->dev, "<%s>\n", __func__); irq = platform_get_irq(pdev, 0); - if (irq < 0) { - dev_err(&pdev->dev, "can't get irq number\n"); + if (irq < 0) return irq; - } res = platform_get_resource(pdev, IORESOURCE_MEM, 0); base = devm_ioremap_resource(&pdev->dev, res); @@ -1139,7 +1198,7 @@ static int i2c_imx_probe(struct platform_device *pdev) goto rpm_disable; /* Set up clock divider */ - i2c_imx->bitrate = IMX_I2C_BIT_RATE; + i2c_imx->bitrate = I2C_MAX_STANDARD_MODE_FREQ; ret = of_property_read_u32(pdev->dev.of_node, "clock-frequency", &i2c_imx->bitrate); if (ret < 0 && pdata && pdata->bitrate) diff --git a/drivers/i2c/busses/i2c-lpc2k.c b/drivers/i2c/busses/i2c-lpc2k.c index deea18b14add..13b0c12e2dba 100644 --- a/drivers/i2c/busses/i2c-lpc2k.c +++ b/drivers/i2c/busses/i2c-lpc2k.c @@ -396,7 +396,7 @@ static int i2c_lpc2k_probe(struct platform_device *pdev) ret = of_property_read_u32(pdev->dev.of_node, "clock-frequency", &bus_clk_rate); if (ret) - bus_clk_rate = 100000; /* 100 kHz default clock rate */ + bus_clk_rate = I2C_MAX_STANDARD_MODE_FREQ; clkrate = clk_get_rate(i2c->clk); if (clkrate == 0) { @@ -407,9 +407,9 @@ static int i2c_lpc2k_probe(struct platform_device *pdev) /* Setup I2C dividers to generate clock with proper duty cycle */ clkrate = clkrate / bus_clk_rate; - if (bus_clk_rate <= 100000) + if (bus_clk_rate <= I2C_MAX_STANDARD_MODE_FREQ) scl_high = (clkrate * I2C_STD_MODE_DUTY) / 100; - else if (bus_clk_rate <= 400000) + else if (bus_clk_rate <= I2C_MAX_FAST_MODE_FREQ) scl_high = (clkrate * I2C_FAST_MODE_DUTY) / 100; else scl_high = (clkrate * I2C_FAST_MODE_PLUS_DUTY) / 100; diff --git a/drivers/i2c/busses/i2c-mt65xx.c b/drivers/i2c/busses/i2c-mt65xx.c index 2152ec5f535c..0ca6c38a15eb 100644 --- a/drivers/i2c/busses/i2c-mt65xx.c +++ b/drivers/i2c/busses/i2c-mt65xx.c @@ -56,9 +56,6 @@ #define I2C_DMA_4G_MODE 0x0001 #define I2C_DEFAULT_CLK_DIV 5 -#define I2C_DEFAULT_SPEED 100000 /* hz */ -#define MAX_FS_MODE_SPEED 400000 -#define MAX_HS_MODE_SPEED 3400000 #define MAX_SAMPLE_CNT_DIV 8 #define MAX_STEP_CNT_DIV 64 #define MAX_HS_STEP_CNT_DIV 8 @@ -450,10 +447,10 @@ static int mtk_i2c_calculate_speed(struct mtk_i2c *i2c, unsigned int clk_src, unsigned int best_mul; unsigned int cnt_mul; - if (target_speed > MAX_HS_MODE_SPEED) - target_speed = MAX_HS_MODE_SPEED; + if (target_speed > I2C_MAX_FAST_MODE_PLUS_FREQ) + target_speed = I2C_MAX_FAST_MODE_PLUS_FREQ; - if (target_speed > MAX_FS_MODE_SPEED) + if (target_speed > I2C_MAX_FAST_MODE_FREQ) max_step_cnt = MAX_HS_STEP_CNT_DIV; else max_step_cnt = MAX_STEP_CNT_DIV; @@ -514,9 +511,9 @@ static int mtk_i2c_set_speed(struct mtk_i2c *i2c, unsigned int parent_clk) clk_src = parent_clk / i2c->clk_src_div; target_speed = i2c->speed_hz; - if (target_speed > MAX_FS_MODE_SPEED) { + if (target_speed > I2C_MAX_FAST_MODE_FREQ) { /* Set master code speed register */ - ret = mtk_i2c_calculate_speed(i2c, clk_src, MAX_FS_MODE_SPEED, + ret = mtk_i2c_calculate_speed(i2c, clk_src, I2C_MAX_FAST_MODE_FREQ, &l_step_cnt, &l_sample_cnt); if (ret < 0) return ret; @@ -581,7 +578,7 @@ static int mtk_i2c_do_transfer(struct mtk_i2c *i2c, struct i2c_msg *msgs, control_reg = mtk_i2c_readw(i2c, OFFSET_CONTROL) & ~(I2C_CONTROL_DIR_CHANGE | I2C_CONTROL_RS); - if ((i2c->speed_hz > MAX_FS_MODE_SPEED) || (left_num >= 1)) + if ((i2c->speed_hz > I2C_MAX_FAST_MODE_FREQ) || (left_num >= 1)) control_reg |= I2C_CONTROL_RS; if (i2c->op == I2C_MASTER_WRRD) @@ -590,7 +587,7 @@ static int mtk_i2c_do_transfer(struct mtk_i2c *i2c, struct i2c_msg *msgs, mtk_i2c_writew(i2c, control_reg, OFFSET_CONTROL); /* set start condition */ - if (i2c->speed_hz <= I2C_DEFAULT_SPEED) + if (i2c->speed_hz <= I2C_MAX_STANDARD_MODE_FREQ) mtk_i2c_writew(i2c, I2C_ST_START_CON, OFFSET_EXT_CONF); else mtk_i2c_writew(i2c, I2C_FS_START_CON, OFFSET_EXT_CONF); @@ -798,7 +795,7 @@ static int mtk_i2c_transfer(struct i2c_adapter *adap, } } - if (i2c->auto_restart && num >= 2 && i2c->speed_hz > MAX_FS_MODE_SPEED) + if (i2c->auto_restart && num >= 2 && i2c->speed_hz > I2C_MAX_FAST_MODE_FREQ) /* ignore the first restart irq after the master code, * otherwise the first transfer will be discarded. */ @@ -893,7 +890,7 @@ static int mtk_i2c_parse_dt(struct device_node *np, struct mtk_i2c *i2c) ret = of_property_read_u32(np, "clock-frequency", &i2c->speed_hz); if (ret < 0) - i2c->speed_hz = I2C_DEFAULT_SPEED; + i2c->speed_hz = I2C_MAX_STANDARD_MODE_FREQ; ret = of_property_read_u32(np, "clock-div", &i2c->clk_src_div); if (ret < 0) diff --git a/drivers/i2c/busses/i2c-mt7621.c b/drivers/i2c/busses/i2c-mt7621.c index 62df8379bc89..45fe4a7fe0c0 100644 --- a/drivers/i2c/busses/i2c-mt7621.c +++ b/drivers/i2c/busses/i2c-mt7621.c @@ -300,7 +300,7 @@ static int mtk_i2c_probe(struct platform_device *pdev) if (of_property_read_u32(pdev->dev.of_node, "clock-frequency", &i2c->bus_freq)) - i2c->bus_freq = 100000; + i2c->bus_freq = I2C_MAX_STANDARD_MODE_FREQ; if (i2c->bus_freq == 0) { dev_warn(i2c->dev, "clock-frequency 0 not supported\n"); diff --git a/drivers/i2c/busses/i2c-mv64xxx.c b/drivers/i2c/busses/i2c-mv64xxx.c index febb7c7ea72b..9b8f1d8552ea 100644 --- a/drivers/i2c/busses/i2c-mv64xxx.c +++ b/drivers/i2c/busses/i2c-mv64xxx.c @@ -810,7 +810,7 @@ mv64xxx_of_config(struct mv64xxx_i2c_data *drv_data, tclk = clk_get_rate(drv_data->clk); if (of_property_read_u32(np, "clock-frequency", &bus_freq)) - bus_freq = 100000; /* 100kHz by default */ + bus_freq = I2C_MAX_STANDARD_MODE_FREQ; /* 100kHz by default */ if (of_device_is_compatible(np, "allwinner,sun4i-a10-i2c") || of_device_is_compatible(np, "allwinner,sun6i-a31-i2c")) @@ -846,14 +846,14 @@ mv64xxx_of_config(struct mv64xxx_i2c_data *drv_data, if (of_device_is_compatible(np, "marvell,mv78230-i2c")) { drv_data->offload_enabled = true; /* The delay is only needed in standard mode (100kHz) */ - if (bus_freq <= 100000) + if (bus_freq <= I2C_MAX_STANDARD_MODE_FREQ) drv_data->errata_delay = true; } if (of_device_is_compatible(np, "marvell,mv78230-a0-i2c")) { drv_data->offload_enabled = false; /* The delay is only needed in standard mode (100kHz) */ - if (bus_freq <= 100000) + if (bus_freq <= I2C_MAX_STANDARD_MODE_FREQ) drv_data->errata_delay = true; } diff --git a/drivers/i2c/busses/i2c-mxs.c b/drivers/i2c/busses/i2c-mxs.c index 89224913f578..9587347447f0 100644 --- a/drivers/i2c/busses/i2c-mxs.c +++ b/drivers/i2c/busses/i2c-mxs.c @@ -731,7 +731,7 @@ static void mxs_i2c_derive_timing(struct mxs_i2c_dev *i2c, uint32_t speed) * This is compensated for by subtracting the respective constants * from the values written to the timing registers. */ - if (speed > 100000) { + if (speed > I2C_MAX_STANDARD_MODE_FREQ) { /* fast mode */ low_count = DIV_ROUND_CLOSEST(divider * 13, (13 + 6)); high_count = DIV_ROUND_CLOSEST(divider * 6, (13 + 6)); @@ -769,7 +769,7 @@ static int mxs_i2c_get_ofdata(struct mxs_i2c_dev *i2c) ret = of_property_read_u32(node, "clock-frequency", &speed); if (ret) { dev_warn(dev, "No I2C speed selected, using 100kHz\n"); - speed = 100000; + speed = I2C_MAX_STANDARD_MODE_FREQ; } mxs_i2c_derive_timing(i2c, speed); @@ -836,10 +836,10 @@ static int mxs_i2c_probe(struct platform_device *pdev) } /* Setup the DMA */ - i2c->dmach = dma_request_slave_channel(dev, "rx-tx"); - if (!i2c->dmach) { + i2c->dmach = dma_request_chan(dev, "rx-tx"); + if (IS_ERR(i2c->dmach)) { dev_err(dev, "Failed to request dma\n"); - return -ENODEV; + return PTR_ERR(i2c->dmach); } platform_set_drvdata(pdev, i2c); diff --git a/drivers/i2c/busses/i2c-nomadik.c b/drivers/i2c/busses/i2c-nomadik.c index 01a7d72e5511..e1e8d4ef9aa7 100644 --- a/drivers/i2c/busses/i2c-nomadik.c +++ b/drivers/i2c/busses/i2c-nomadik.c @@ -396,7 +396,7 @@ static void setup_i2c_controller(struct nmk_i2c_dev *dev) * 2 whereas it is 3 for fast and fastplus mode of * operation. TODO - high speed support. */ - div = (dev->clk_freq > 100000) ? 3 : 2; + div = (dev->clk_freq > I2C_MAX_STANDARD_MODE_FREQ) ? 3 : 2; /* * generate the mask for baud rate counters. The controller @@ -420,7 +420,7 @@ static void setup_i2c_controller(struct nmk_i2c_dev *dev) if (dev->sm > I2C_FREQ_MODE_FAST) { dev_err(&dev->adev->dev, "do not support this mode defaulting to std. mode\n"); - brcr2 = i2c_clk/(100000 * 2) & 0xffff; + brcr2 = i2c_clk / (I2C_MAX_STANDARD_MODE_FREQ * 2) & 0xffff; writel((brcr1 | brcr2), dev->virtbase + I2C_BRCR); writel(I2C_FREQ_MODE_STANDARD << 4, dev->virtbase + I2C_CR); @@ -949,10 +949,10 @@ static void nmk_i2c_of_probe(struct device_node *np, { /* Default to 100 kHz if no frequency is given in the node */ if (of_property_read_u32(np, "clock-frequency", &nmk->clk_freq)) - nmk->clk_freq = 100000; + nmk->clk_freq = I2C_MAX_STANDARD_MODE_FREQ; /* This driver only supports 'standard' and 'fast' modes of operation. */ - if (nmk->clk_freq <= 100000) + if (nmk->clk_freq <= I2C_MAX_STANDARD_MODE_FREQ) nmk->sm = I2C_FREQ_MODE_STANDARD; else nmk->sm = I2C_FREQ_MODE_FAST; diff --git a/drivers/i2c/busses/i2c-omap.c b/drivers/i2c/busses/i2c-omap.c index 2dfea357b131..71b4637c86b7 100644 --- a/drivers/i2c/busses/i2c-omap.c +++ b/drivers/i2c/busses/i2c-omap.c @@ -1355,7 +1355,6 @@ omap_i2c_probe(struct platform_device *pdev) { struct omap_i2c_dev *omap; struct i2c_adapter *adap; - struct resource *mem; const struct omap_i2c_bus_platform_data *pdata = dev_get_platdata(&pdev->dev); struct device_node *node = pdev->dev.of_node; @@ -1375,14 +1374,13 @@ omap_i2c_probe(struct platform_device *pdev) if (!omap) return -ENOMEM; - mem = platform_get_resource(pdev, IORESOURCE_MEM, 0); - omap->base = devm_ioremap_resource(&pdev->dev, mem); + omap->base = devm_platform_ioremap_resource(pdev, 0); if (IS_ERR(omap->base)) return PTR_ERR(omap->base); match = of_match_device(of_match_ptr(omap_i2c_of_match), &pdev->dev); if (match) { - u32 freq = 100000; /* default to 100000 Hz */ + u32 freq = I2C_MAX_STANDARD_MODE_FREQ; pdata = match->data; omap->flags = pdata->flags; diff --git a/drivers/i2c/busses/i2c-owl.c b/drivers/i2c/busses/i2c-owl.c index b6b5a495118b..3ab8be62c581 100644 --- a/drivers/i2c/busses/i2c-owl.c +++ b/drivers/i2c/busses/i2c-owl.c @@ -87,9 +87,6 @@ #define OWL_I2C_MAX_RETRIES 50 -#define OWL_I2C_DEF_SPEED_HZ 100000 -#define OWL_I2C_MAX_SPEED_HZ 400000 - struct owl_i2c_dev { struct i2c_adapter adap; struct i2c_msg *msg; @@ -419,11 +416,11 @@ static int owl_i2c_probe(struct platform_device *pdev) if (of_property_read_u32(dev->of_node, "clock-frequency", &i2c_dev->bus_freq)) - i2c_dev->bus_freq = OWL_I2C_DEF_SPEED_HZ; + i2c_dev->bus_freq = I2C_MAX_STANDARD_MODE_FREQ; /* We support only frequencies of 100k and 400k for now */ - if (i2c_dev->bus_freq != OWL_I2C_DEF_SPEED_HZ && - i2c_dev->bus_freq != OWL_I2C_MAX_SPEED_HZ) { + if (i2c_dev->bus_freq != I2C_MAX_STANDARD_MODE_FREQ && + i2c_dev->bus_freq != I2C_MAX_FAST_MODE_FREQ) { dev_err(dev, "invalid clock-frequency %d\n", i2c_dev->bus_freq); return -EINVAL; } diff --git a/drivers/i2c/busses/i2c-parport.c b/drivers/i2c/busses/i2c-parport.c index 81eb441b2387..a535889acca6 100644 --- a/drivers/i2c/busses/i2c-parport.c +++ b/drivers/i2c/busses/i2c-parport.c @@ -333,13 +333,17 @@ static void i2c_parport_attach(struct parport *port) /* Setup SMBus alert if supported */ if (adapter_parm[type].smbus_alert) { - adapter->ara = i2c_setup_smbus_alert(&adapter->adapter, - &adapter->alert_data); - if (adapter->ara) + struct i2c_client *ara; + + ara = i2c_new_smbus_alert_device(&adapter->adapter, + &adapter->alert_data); + if (!IS_ERR(ara)) { + adapter->ara = ara; parport_enable_irq(port); - else + } else { dev_warn(&adapter->pdev->dev, "Failed to register ARA client\n"); + } } /* Add the new adapter to the list */ diff --git a/drivers/i2c/busses/i2c-powermac.c b/drivers/i2c/busses/i2c-powermac.c index 973e5339033c..d565714c1f13 100644 --- a/drivers/i2c/busses/i2c-powermac.c +++ b/drivers/i2c/busses/i2c-powermac.c @@ -279,14 +279,13 @@ static bool i2c_powermac_get_type(struct i2c_adapter *adap, { char tmp[16]; - /* Note: we to _NOT_ want the standard - * i2c drivers to match with any of our powermac stuff - * unless they have been specifically modified to handle - * it on a case by case basis. For example, for thermal - * control, things like lm75 etc... shall match with their - * corresponding windfarm drivers, _NOT_ the generic ones, - * so we force a prefix of AAPL, onto the modalias to - * make that happen + /* + * Note: we do _NOT_ want the standard i2c drivers to match with any of + * our powermac stuff unless they have been specifically modified to + * handle it on a case by case basis. For example, for thermal control, + * things like lm75 etc... shall match with their corresponding + * windfarm drivers, _NOT_ the generic ones, so we force a prefix of + * 'MAC', onto the modalias to make that happen */ /* First try proper modalias */ diff --git a/drivers/i2c/busses/i2c-qcom-geni.c b/drivers/i2c/busses/i2c-qcom-geni.c index 17abf60c94ae..18d1e4fd4cf3 100644 --- a/drivers/i2c/busses/i2c-qcom-geni.c +++ b/drivers/i2c/busses/i2c-qcom-geni.c @@ -10,7 +10,6 @@ #include <linux/io.h> #include <linux/module.h> #include <linux/of.h> -#include <linux/of_platform.h> #include <linux/platform_device.h> #include <linux/pm_runtime.h> #include <linux/qcom-geni-se.h> @@ -502,45 +501,40 @@ static int geni_i2c_probe(struct platform_device *pdev) struct resource *res; u32 proto, tx_depth; int ret; + struct device *dev = &pdev->dev; - gi2c = devm_kzalloc(&pdev->dev, sizeof(*gi2c), GFP_KERNEL); + gi2c = devm_kzalloc(dev, sizeof(*gi2c), GFP_KERNEL); if (!gi2c) return -ENOMEM; - gi2c->se.dev = &pdev->dev; - gi2c->se.wrapper = dev_get_drvdata(pdev->dev.parent); + gi2c->se.dev = dev; + gi2c->se.wrapper = dev_get_drvdata(dev->parent); res = platform_get_resource(pdev, IORESOURCE_MEM, 0); - gi2c->se.base = devm_ioremap_resource(&pdev->dev, res); + gi2c->se.base = devm_ioremap_resource(dev, res); if (IS_ERR(gi2c->se.base)) return PTR_ERR(gi2c->se.base); - gi2c->se.clk = devm_clk_get(&pdev->dev, "se"); - if (IS_ERR(gi2c->se.clk) && !has_acpi_companion(&pdev->dev)) { - ret = PTR_ERR(gi2c->se.clk); - dev_err(&pdev->dev, "Err getting SE Core clk %d\n", ret); - return ret; - } + gi2c->se.clk = devm_clk_get(dev, "se"); + if (IS_ERR(gi2c->se.clk) && !has_acpi_companion(dev)) + return PTR_ERR(gi2c->se.clk); - ret = device_property_read_u32(&pdev->dev, "clock-frequency", - &gi2c->clk_freq_out); + ret = device_property_read_u32(dev, "clock-frequency", + &gi2c->clk_freq_out); if (ret) { - dev_info(&pdev->dev, - "Bus frequency not specified, default to 100kHz.\n"); + dev_info(dev, "Bus frequency not specified, default to 100kHz.\n"); gi2c->clk_freq_out = KHZ(100); } - if (has_acpi_companion(&pdev->dev)) - ACPI_COMPANION_SET(&gi2c->adap.dev, ACPI_COMPANION(&pdev->dev)); + if (has_acpi_companion(dev)) + ACPI_COMPANION_SET(&gi2c->adap.dev, ACPI_COMPANION(dev)); gi2c->irq = platform_get_irq(pdev, 0); - if (gi2c->irq < 0) { - dev_err(&pdev->dev, "IRQ error for i2c-geni\n"); + if (gi2c->irq < 0) return gi2c->irq; - } ret = geni_i2c_clk_map_idx(gi2c); if (ret) { - dev_err(&pdev->dev, "Invalid clk frequency %d Hz: %d\n", + dev_err(dev, "Invalid clk frequency %d Hz: %d\n", gi2c->clk_freq_out, ret); return ret; } @@ -549,29 +543,29 @@ static int geni_i2c_probe(struct platform_device *pdev) init_completion(&gi2c->done); spin_lock_init(&gi2c->lock); platform_set_drvdata(pdev, gi2c); - ret = devm_request_irq(&pdev->dev, gi2c->irq, geni_i2c_irq, - IRQF_TRIGGER_HIGH, "i2c_geni", gi2c); + ret = devm_request_irq(dev, gi2c->irq, geni_i2c_irq, 0, + dev_name(dev), gi2c); if (ret) { - dev_err(&pdev->dev, "Request_irq failed:%d: err:%d\n", + dev_err(dev, "Request_irq failed:%d: err:%d\n", gi2c->irq, ret); return ret; } /* Disable the interrupt so that the system can enter low-power mode */ disable_irq(gi2c->irq); i2c_set_adapdata(&gi2c->adap, gi2c); - gi2c->adap.dev.parent = &pdev->dev; - gi2c->adap.dev.of_node = pdev->dev.of_node; + gi2c->adap.dev.parent = dev; + gi2c->adap.dev.of_node = dev->of_node; strlcpy(gi2c->adap.name, "Geni-I2C", sizeof(gi2c->adap.name)); ret = geni_se_resources_on(&gi2c->se); if (ret) { - dev_err(&pdev->dev, "Error turning on resources %d\n", ret); + dev_err(dev, "Error turning on resources %d\n", ret); return ret; } proto = geni_se_read_proto(&gi2c->se); tx_depth = geni_se_get_tx_fifo_depth(&gi2c->se); if (proto != GENI_SE_I2C) { - dev_err(&pdev->dev, "Invalid proto %d\n", proto); + dev_err(dev, "Invalid proto %d\n", proto); geni_se_resources_off(&gi2c->se); return -ENXIO; } @@ -581,11 +575,11 @@ static int geni_i2c_probe(struct platform_device *pdev) true, true, true); ret = geni_se_resources_off(&gi2c->se); if (ret) { - dev_err(&pdev->dev, "Error turning off resources %d\n", ret); + dev_err(dev, "Error turning off resources %d\n", ret); return ret; } - dev_dbg(&pdev->dev, "i2c fifo/se-dma mode. fifo depth:%d\n", tx_depth); + dev_dbg(dev, "i2c fifo/se-dma mode. fifo depth:%d\n", tx_depth); gi2c->suspended = 1; pm_runtime_set_suspended(gi2c->se.dev); @@ -595,12 +589,12 @@ static int geni_i2c_probe(struct platform_device *pdev) ret = i2c_add_adapter(&gi2c->adap); if (ret) { - dev_err(&pdev->dev, "Error adding i2c adapter %d\n", ret); + dev_err(dev, "Error adding i2c adapter %d\n", ret); pm_runtime_disable(gi2c->se.dev); return ret; } - dev_dbg(&pdev->dev, "Geni-I2C adaptor successfully added\n"); + dev_dbg(dev, "Geni-I2C adaptor successfully added\n"); return 0; } diff --git a/drivers/i2c/busses/i2c-qup.c b/drivers/i2c/busses/i2c-qup.c index 2d7dabe12723..748872a9b0fc 100644 --- a/drivers/i2c/busses/i2c-qup.c +++ b/drivers/i2c/busses/i2c-qup.c @@ -136,13 +136,8 @@ */ #define TOUT_MIN 2 -/* I2C Frequency Modes */ -#define I2C_STANDARD_FREQ 100000 -#define I2C_FAST_MODE_FREQ 400000 -#define I2C_FAST_MODE_PLUS_FREQ 1000000 - /* Default values. Use these if FW query fails */ -#define DEFAULT_CLK_FREQ I2C_STANDARD_FREQ +#define DEFAULT_CLK_FREQ I2C_MAX_STANDARD_MODE_FREQ #define DEFAULT_SRC_CLK 20000000 /* @@ -1756,7 +1751,7 @@ static int qup_i2c_probe(struct platform_device *pdev) nodma: /* We support frequencies up to FAST Mode Plus (1MHz) */ - if (!clk_freq || clk_freq > I2C_FAST_MODE_PLUS_FREQ) { + if (!clk_freq || clk_freq > I2C_MAX_FAST_MODE_PLUS_FREQ) { dev_err(qup->dev, "clock frequency not supported %d\n", clk_freq); return -EINVAL; @@ -1861,7 +1856,7 @@ nodma: qup->in_fifo_sz = qup->in_blk_sz * (2 << size); hs_div = 3; - if (clk_freq <= I2C_STANDARD_FREQ) { + if (clk_freq <= I2C_MAX_STANDARD_MODE_FREQ) { fs_div = ((src_clk_freq / clk_freq) / 2) - 3; qup->clk_ctl = (hs_div << 8) | (fs_div & 0xff); } else { diff --git a/drivers/i2c/busses/i2c-rcar.c b/drivers/i2c/busses/i2c-rcar.c index 879f0e61a496..3b5397aa4ca6 100644 --- a/drivers/i2c/busses/i2c-rcar.c +++ b/drivers/i2c/busses/i2c-rcar.c @@ -235,17 +235,20 @@ static int rcar_i2c_bus_barrier(struct rcar_i2c_priv *priv) return i2c_recover_bus(&priv->adap); } -static int rcar_i2c_clock_calculate(struct rcar_i2c_priv *priv, struct i2c_timings *t) +static int rcar_i2c_clock_calculate(struct rcar_i2c_priv *priv) { u32 scgd, cdf, round, ick, sum, scl, cdf_width; unsigned long rate; struct device *dev = rcar_i2c_priv_to_dev(priv); + struct i2c_timings t = { + .bus_freq_hz = I2C_MAX_STANDARD_MODE_FREQ, + .scl_fall_ns = 35, + .scl_rise_ns = 200, + .scl_int_delay_ns = 50, + }; /* Fall back to previously used values if not supplied */ - t->bus_freq_hz = t->bus_freq_hz ?: 100000; - t->scl_fall_ns = t->scl_fall_ns ?: 35; - t->scl_rise_ns = t->scl_rise_ns ?: 200; - t->scl_int_delay_ns = t->scl_int_delay_ns ?: 50; + i2c_parse_fw_timings(dev, &t, false); switch (priv->devtype) { case I2C_RCAR_GEN1: @@ -291,7 +294,7 @@ static int rcar_i2c_clock_calculate(struct rcar_i2c_priv *priv, struct i2c_timin * = F[sum * ick / 1000000000] * = F[(ick / 1000000) * sum / 1000] */ - sum = t->scl_fall_ns + t->scl_rise_ns + t->scl_int_delay_ns; + sum = t.scl_fall_ns + t.scl_rise_ns + t.scl_int_delay_ns; round = (ick + 500000) / 1000000 * sum; round = (round + 500) / 1000; @@ -309,7 +312,7 @@ static int rcar_i2c_clock_calculate(struct rcar_i2c_priv *priv, struct i2c_timin */ for (scgd = 0; scgd < 0x40; scgd++) { scl = ick / (20 + (scgd * 8) + round); - if (scl <= t->bus_freq_hz) + if (scl <= t.bus_freq_hz) goto scgd_find; } dev_err(dev, "it is impossible to calculate best SCL\n"); @@ -317,7 +320,7 @@ static int rcar_i2c_clock_calculate(struct rcar_i2c_priv *priv, struct i2c_timin scgd_find: dev_dbg(dev, "clk %d/%d(%lu), round %u, CDF:0x%x, SCGD: 0x%x\n", - scl, t->bus_freq_hz, rate, round, cdf, scgd); + scl, t.bus_freq_hz, rate, round, cdf, scgd); /* keep icccr value */ priv->icccr = scgd << cdf_width | cdf; @@ -920,7 +923,6 @@ static int rcar_i2c_probe(struct platform_device *pdev) struct rcar_i2c_priv *priv; struct i2c_adapter *adap; struct device *dev = &pdev->dev; - struct i2c_timings i2c_t; int ret; /* Otherwise logic will break because some bytes must always use PIO */ @@ -957,8 +959,6 @@ static int rcar_i2c_probe(struct platform_device *pdev) i2c_set_adapdata(adap, priv); strlcpy(adap->name, pdev->name, sizeof(adap->name)); - i2c_parse_fw_timings(dev, &i2c_t, false); - /* Init DMA */ sg_init_table(&priv->sg, 1); priv->dma_direction = DMA_NONE; @@ -967,7 +967,7 @@ static int rcar_i2c_probe(struct platform_device *pdev) /* Activate device for clock calculation */ pm_runtime_enable(dev); pm_runtime_get_sync(dev); - ret = rcar_i2c_clock_calculate(priv, &i2c_t); + ret = rcar_i2c_clock_calculate(priv); if (ret < 0) goto out_pm_put; diff --git a/drivers/i2c/busses/i2c-riic.c b/drivers/i2c/busses/i2c-riic.c index 800414886f6b..4eccc0f69861 100644 --- a/drivers/i2c/busses/i2c-riic.c +++ b/drivers/i2c/busses/i2c-riic.c @@ -287,10 +287,10 @@ static int riic_init_hw(struct riic_dev *riic, struct i2c_timings *t) pm_runtime_get_sync(riic->adapter.dev.parent); - if (t->bus_freq_hz > 400000) { + if (t->bus_freq_hz > I2C_MAX_FAST_MODE_FREQ) { dev_err(&riic->adapter.dev, - "unsupported bus speed (%dHz). 400000 max\n", - t->bus_freq_hz); + "unsupported bus speed (%dHz). %d max\n", + t->bus_freq_hz, I2C_MAX_FAST_MODE_FREQ); ret = -EINVAL; goto out; } diff --git a/drivers/i2c/busses/i2c-rk3x.c b/drivers/i2c/busses/i2c-rk3x.c index 1a33007b03e9..73272d4296bb 100644 --- a/drivers/i2c/busses/i2c-rk3x.c +++ b/drivers/i2c/busses/i2c-rk3x.c @@ -539,9 +539,9 @@ out: */ static const struct i2c_spec_values *rk3x_i2c_get_spec(unsigned int speed) { - if (speed <= 100000) + if (speed <= I2C_MAX_STANDARD_MODE_FREQ) return &standard_mode_spec; - else if (speed <= 400000) + else if (speed <= I2C_MAX_FAST_MODE_FREQ) return &fast_mode_spec; else return &fast_mode_plus_spec; @@ -578,8 +578,8 @@ static int rk3x_i2c_v0_calc_timings(unsigned long clk_rate, int ret = 0; /* Only support standard-mode and fast-mode */ - if (WARN_ON(t->bus_freq_hz > 400000)) - t->bus_freq_hz = 400000; + if (WARN_ON(t->bus_freq_hz > I2C_MAX_FAST_MODE_FREQ)) + t->bus_freq_hz = I2C_MAX_FAST_MODE_FREQ; /* prevent scl_rate_khz from becoming 0 */ if (WARN_ON(t->bus_freq_hz < 1000)) @@ -758,8 +758,8 @@ static int rk3x_i2c_v1_calc_timings(unsigned long clk_rate, int ret = 0; /* Support standard-mode, fast-mode and fast-mode plus */ - if (WARN_ON(t->bus_freq_hz > 1000000)) - t->bus_freq_hz = 1000000; + if (WARN_ON(t->bus_freq_hz > I2C_MAX_FAST_MODE_PLUS_FREQ)) + t->bus_freq_hz = I2C_MAX_FAST_MODE_PLUS_FREQ; /* prevent scl_rate_khz from becoming 0 */ if (WARN_ON(t->bus_freq_hz < 1000)) diff --git a/drivers/i2c/busses/i2c-s3c2410.c b/drivers/i2c/busses/i2c-s3c2410.c index c98ef4c4a0c9..5a5638e1daa1 100644 --- a/drivers/i2c/busses/i2c-s3c2410.c +++ b/drivers/i2c/busses/i2c-s3c2410.c @@ -835,11 +835,11 @@ static int s3c24xx_i2c_clockrate(struct s3c24xx_i2c *i2c, unsigned int *got) int freq; i2c->clkrate = clkin; - clkin /= 1000; /* clkin now in KHz */ + clkin /= 1000; /* clkin now in KHz */ dev_dbg(i2c->dev, "pdata desired frequency %lu\n", pdata->frequency); - target_frequency = pdata->frequency ? pdata->frequency : 100000; + target_frequency = pdata->frequency ?: I2C_MAX_STANDARD_MODE_FREQ; target_frequency /= 1000; /* Target frequency now in KHz */ diff --git a/drivers/i2c/busses/i2c-sh_mobile.c b/drivers/i2c/busses/i2c-sh_mobile.c index 82b3b795e0bd..d83ca4028fa0 100644 --- a/drivers/i2c/busses/i2c-sh_mobile.c +++ b/drivers/i2c/busses/i2c-sh_mobile.c @@ -145,9 +145,6 @@ struct sh_mobile_dt_config { #define IIC_FLAG_HAS_ICIC67 (1 << 0) -#define STANDARD_MODE 100000 -#define FAST_MODE 400000 - /* Register offsets */ #define ICDR 0x00 #define ICCR 0x04 @@ -270,11 +267,11 @@ static int sh_mobile_i2c_init(struct sh_mobile_i2c_data *pd) i2c_clk_khz = clk_get_rate(pd->clk) / 1000 / pd->clks_per_count; - if (pd->bus_speed == STANDARD_MODE) { + if (pd->bus_speed == I2C_MAX_STANDARD_MODE_FREQ) { tLOW = 47; /* tLOW = 4.7 us */ tHIGH = 40; /* tHD;STA = tHIGH = 4.0 us */ tf = 3; /* tf = 0.3 us */ - } else if (pd->bus_speed == FAST_MODE) { + } else if (pd->bus_speed == I2C_MAX_FAST_MODE_FREQ) { tLOW = 13; /* tLOW = 1.3 us */ tHIGH = 6; /* tHD;STA = tHIGH = 0.6 us */ tf = 3; /* tf = 0.3 us */ @@ -851,7 +848,7 @@ static int sh_mobile_i2c_probe(struct platform_device *dev) return PTR_ERR(pd->reg); ret = of_property_read_u32(dev->dev.of_node, "clock-frequency", &bus_speed); - pd->bus_speed = (ret || !bus_speed) ? STANDARD_MODE : bus_speed; + pd->bus_speed = (ret || !bus_speed) ? I2C_MAX_STANDARD_MODE_FREQ : bus_speed; pd->clks_per_count = 1; /* Newer variants come with two new bits in ICIC */ diff --git a/drivers/i2c/busses/i2c-sirf.c b/drivers/i2c/busses/i2c-sirf.c index fb7a046b3226..a459e00c6851 100644 --- a/drivers/i2c/busses/i2c-sirf.c +++ b/drivers/i2c/busses/i2c-sirf.c @@ -62,7 +62,6 @@ #define SIRFSOC_I2C_STOP BIT(6) #define SIRFSOC_I2C_START BIT(7) -#define SIRFSOC_I2C_DEFAULT_SPEED 100000 #define SIRFSOC_I2C_ERR_NOACK 1 #define SIRFSOC_I2C_ERR_TIMEOUT 2 @@ -353,7 +352,7 @@ static int i2c_sirfsoc_probe(struct platform_device *pdev) err = of_property_read_u32(pdev->dev.of_node, "clock-frequency", &bitrate); if (err < 0) - bitrate = SIRFSOC_I2C_DEFAULT_SPEED; + bitrate = I2C_MAX_STANDARD_MODE_FREQ; /* * Due to some hardware design issues, we need to tune the formula. diff --git a/drivers/i2c/busses/i2c-sprd.c b/drivers/i2c/busses/i2c-sprd.c index b432e7580458..123a42bfe3b1 100644 --- a/drivers/i2c/busses/i2c-sprd.c +++ b/drivers/i2c/busses/i2c-sprd.c @@ -337,9 +337,9 @@ static void sprd_i2c_set_clk(struct sprd_i2c *i2c_dev, u32 freq) writel(div1, i2c_dev->base + ADDR_DVD1); /* Start hold timing = hold time(us) * source clock */ - if (freq == 400000) + if (freq == I2C_MAX_FAST_MODE_FREQ) writel((6 * apb_clk) / 10000000, i2c_dev->base + ADDR_STA0_DVD); - else if (freq == 100000) + else if (freq == I2C_MAX_STANDARD_MODE_FREQ) writel((4 * apb_clk) / 1000000, i2c_dev->base + ADDR_STA0_DVD); } @@ -502,7 +502,7 @@ static int sprd_i2c_probe(struct platform_device *pdev) snprintf(i2c_dev->adap.name, sizeof(i2c_dev->adap.name), "%s", "sprd-i2c"); - i2c_dev->bus_freq = 100000; + i2c_dev->bus_freq = I2C_MAX_STANDARD_MODE_FREQ; i2c_dev->adap.owner = THIS_MODULE; i2c_dev->dev = dev; i2c_dev->adap.retries = 3; @@ -516,7 +516,8 @@ static int sprd_i2c_probe(struct platform_device *pdev) i2c_dev->bus_freq = prop; /* We only support 100k and 400k now, otherwise will return error. */ - if (i2c_dev->bus_freq != 100000 && i2c_dev->bus_freq != 400000) + if (i2c_dev->bus_freq != I2C_MAX_STANDARD_MODE_FREQ && + i2c_dev->bus_freq != I2C_MAX_FAST_MODE_FREQ) return -EINVAL; ret = sprd_i2c_clk_init(i2c_dev); diff --git a/drivers/i2c/busses/i2c-st.c b/drivers/i2c/busses/i2c-st.c index f7f7b5b64720..faa81a95551f 100644 --- a/drivers/i2c/busses/i2c-st.c +++ b/drivers/i2c/busses/i2c-st.c @@ -213,7 +213,7 @@ static inline void st_i2c_clr_bits(void __iomem *reg, u32 mask) */ static struct st_i2c_timings i2c_timings[] = { [I2C_MODE_STANDARD] = { - .rate = 100000, + .rate = I2C_MAX_STANDARD_MODE_FREQ, .rep_start_hold = 4400, .rep_start_setup = 5170, .start_hold = 4400, @@ -222,7 +222,7 @@ static struct st_i2c_timings i2c_timings[] = { .bus_free_time = 5170, }, [I2C_MODE_FAST] = { - .rate = 400000, + .rate = I2C_MAX_FAST_MODE_FREQ, .rep_start_hold = 660, .rep_start_setup = 660, .start_hold = 660, @@ -836,7 +836,7 @@ static int st_i2c_probe(struct platform_device *pdev) i2c_dev->mode = I2C_MODE_STANDARD; ret = of_property_read_u32(np, "clock-frequency", &clk_rate); - if ((!ret) && (clk_rate == 400000)) + if (!ret && (clk_rate == I2C_MAX_FAST_MODE_FREQ)) i2c_dev->mode = I2C_MODE_FAST; i2c_dev->dev = &pdev->dev; diff --git a/drivers/i2c/busses/i2c-stm32f4.c b/drivers/i2c/busses/i2c-stm32f4.c index ba600d77a3f8..d6a69dfcac3f 100644 --- a/drivers/i2c/busses/i2c-stm32f4.c +++ b/drivers/i2c/busses/i2c-stm32f4.c @@ -232,10 +232,10 @@ static void stm32f4_i2c_set_speed_mode(struct stm32f4_i2c_dev *i2c_dev) * In standard mode: * t_scl_high = t_scl_low = CCR * I2C parent clk period * So to reach 100 kHz, we have: - * CCR = I2C parent rate / 100 kHz >> 1 + * CCR = I2C parent rate / (100 kHz * 2) * * For example with parent rate = 2 MHz: - * CCR = 2000000 / (100000 << 1) = 10 + * CCR = 2000000 / (100000 * 2) = 10 * t_scl_high = t_scl_low = 10 * (1 / 2000000) = 5000 ns * t_scl_high + t_scl_low = 10000 ns so 100 kHz is reached * @@ -243,7 +243,7 @@ static void stm32f4_i2c_set_speed_mode(struct stm32f4_i2c_dev *i2c_dev) * parent rate is not higher than 46 MHz . As a result val * is at most 8 bits wide and so fits into the CCR bits [11:0]. */ - val = i2c_dev->parent_rate / (100000 << 1); + val = i2c_dev->parent_rate / (I2C_MAX_STANDARD_MODE_FREQ * 2); } else { /* * In fast mode, we compute CCR with duty = 0 as with low @@ -263,7 +263,7 @@ static void stm32f4_i2c_set_speed_mode(struct stm32f4_i2c_dev *i2c_dev) * parent rate is not higher than 46 MHz . As a result val * is at most 6 bits wide and so fits into the CCR bits [11:0]. */ - val = DIV_ROUND_UP(i2c_dev->parent_rate, 400000 * 3); + val = DIV_ROUND_UP(i2c_dev->parent_rate, I2C_MAX_FAST_MODE_FREQ * 3); /* Select Fast mode */ ccr |= STM32F4_I2C_CCR_FS; @@ -807,7 +807,7 @@ static int stm32f4_i2c_probe(struct platform_device *pdev) i2c_dev->speed = STM32_I2C_SPEED_STANDARD; ret = of_property_read_u32(np, "clock-frequency", &clk_rate); - if (!ret && clk_rate >= 400000) + if (!ret && clk_rate >= I2C_MAX_FAST_MODE_FREQ) i2c_dev->speed = STM32_I2C_SPEED_FAST; i2c_dev->dev = &pdev->dev; diff --git a/drivers/i2c/busses/i2c-stm32f7.c b/drivers/i2c/busses/i2c-stm32f7.c index 5c3e8ac6ad92..330ffed011e0 100644 --- a/drivers/i2c/busses/i2c-stm32f7.c +++ b/drivers/i2c/busses/i2c-stm32f7.c @@ -29,6 +29,7 @@ #include <linux/platform_device.h> #include <linux/pinctrl/consumer.h> #include <linux/pm_runtime.h> +#include <linux/pm_wakeirq.h> #include <linux/regmap.h> #include <linux/reset.h> #include <linux/slab.h> @@ -49,6 +50,7 @@ /* STM32F7 I2C control 1 */ #define STM32F7_I2C_CR1_PECEN BIT(23) +#define STM32F7_I2C_CR1_WUPEN BIT(18) #define STM32F7_I2C_CR1_SBC BIT(16) #define STM32F7_I2C_CR1_RXDMAEN BIT(15) #define STM32F7_I2C_CR1_TXDMAEN BIT(14) @@ -174,7 +176,6 @@ * @cr2: Control register 2 * @oar1: Own address 1 register * @oar2: Own address 2 register - * @pecr: PEC register * @tmgr: Timing register */ struct stm32f7_i2c_regs { @@ -182,7 +183,6 @@ struct stm32f7_i2c_regs { u32 cr2; u32 oar1; u32 oar2; - u32 pecr; u32 tmgr; }; @@ -221,6 +221,7 @@ struct stm32f7_i2c_spec { * @fall_time: Fall time (ns) * @dnf: Digital filter coefficient (0-16) * @analog_filter: Analog filter delay (On/Off) + * @fmp_clr_offset: Fast Mode Plus clear register offset from set register */ struct stm32f7_i2c_setup { enum stm32_i2c_speed speed; @@ -230,6 +231,7 @@ struct stm32f7_i2c_setup { u32 fall_time; u8 dnf; bool analog_filter; + u32 fmp_clr_offset; }; /** @@ -301,6 +303,10 @@ struct stm32f7_i2c_msg { * @dma: dma data * @use_dma: boolean to know if dma is used in the current transfer * @regmap: holds SYSCFG phandle for Fast Mode Plus bits + * @fmp_sreg: register address for setting Fast Mode Plus bits + * @fmp_creg: register address for clearing Fast Mode Plus bits + * @fmp_mask: mask for Fast Mode Plus bits in set register + * @wakeup_src: boolean to know if the device is a wakeup source */ struct stm32f7_i2c_dev { struct i2c_adapter adap; @@ -323,6 +329,10 @@ struct stm32f7_i2c_dev { struct stm32_i2c_dma *dma; bool use_dma; struct regmap *regmap; + u32 fmp_sreg; + u32 fmp_creg; + u32 fmp_mask; + bool wakeup_src; }; /* @@ -334,9 +344,9 @@ struct stm32f7_i2c_dev { */ static struct stm32f7_i2c_spec i2c_specs[] = { [STM32_I2C_SPEED_STANDARD] = { - .rate = 100000, - .rate_min = 80000, - .rate_max = 100000, + .rate = I2C_MAX_STANDARD_MODE_FREQ, + .rate_min = I2C_MAX_STANDARD_MODE_FREQ * 8 / 10, /* 80% */ + .rate_max = I2C_MAX_STANDARD_MODE_FREQ, .fall_max = 300, .rise_max = 1000, .hddat_min = 0, @@ -346,9 +356,9 @@ static struct stm32f7_i2c_spec i2c_specs[] = { .h_min = 4000, }, [STM32_I2C_SPEED_FAST] = { - .rate = 400000, - .rate_min = 320000, - .rate_max = 400000, + .rate = I2C_MAX_FAST_MODE_FREQ, + .rate_min = I2C_MAX_FAST_MODE_FREQ * 8 / 10, /* 80% */ + .rate_max = I2C_MAX_FAST_MODE_FREQ, .fall_max = 300, .rise_max = 300, .hddat_min = 0, @@ -358,9 +368,9 @@ static struct stm32f7_i2c_spec i2c_specs[] = { .h_min = 600, }, [STM32_I2C_SPEED_FAST_PLUS] = { - .rate = 1000000, - .rate_min = 800000, - .rate_max = 1000000, + .rate = I2C_MAX_FAST_MODE_PLUS_FREQ, + .rate_min = I2C_MAX_FAST_MODE_PLUS_FREQ * 8 / 10, /* 80% */ + .rate_max = I2C_MAX_FAST_MODE_PLUS_FREQ, .fall_max = 100, .rise_max = 120, .hddat_min = 0, @@ -378,6 +388,14 @@ static const struct stm32f7_i2c_setup stm32f7_setup = { .analog_filter = STM32F7_I2C_ANALOG_FILTER_ENABLE, }; +static const struct stm32f7_i2c_setup stm32mp15_setup = { + .rise_time = STM32F7_I2C_RISE_TIME_DEFAULT, + .fall_time = STM32F7_I2C_FALL_TIME_DEFAULT, + .dnf = STM32F7_I2C_DNF_DEFAULT, + .analog_filter = STM32F7_I2C_ANALOG_FILTER_ENABLE, + .fmp_clr_offset = 0x40, +}; + static inline void stm32f7_i2c_set_bits(void __iomem *reg, u32 mask) { writel_relaxed(readl_relaxed(reg) | mask, reg); @@ -592,8 +610,25 @@ exit: static int stm32f7_i2c_setup_timing(struct stm32f7_i2c_dev *i2c_dev, struct stm32f7_i2c_setup *setup) { + struct i2c_timings timings, *t = &timings; int ret = 0; + t->bus_freq_hz = I2C_MAX_STANDARD_MODE_FREQ; + t->scl_rise_ns = i2c_dev->setup.rise_time; + t->scl_fall_ns = i2c_dev->setup.fall_time; + + i2c_parse_fw_timings(i2c_dev->dev, t, false); + + if (t->bus_freq_hz >= I2C_MAX_FAST_MODE_PLUS_FREQ) + i2c_dev->speed = STM32_I2C_SPEED_FAST_PLUS; + else if (t->bus_freq_hz >= I2C_MAX_FAST_MODE_FREQ) + i2c_dev->speed = STM32_I2C_SPEED_FAST; + else + i2c_dev->speed = STM32_I2C_SPEED_STANDARD; + + i2c_dev->setup.rise_time = t->scl_rise_ns; + i2c_dev->setup.fall_time = t->scl_fall_ns; + setup->speed = i2c_dev->speed; setup->speed_freq = i2c_specs[setup->speed].rate; setup->clock_src = clk_get_rate(i2c_dev->clk); @@ -1691,6 +1726,24 @@ pm_free: return ret; } +static void stm32f7_i2c_enable_wakeup(struct stm32f7_i2c_dev *i2c_dev, + bool enable) +{ + void __iomem *base = i2c_dev->base; + u32 mask = STM32F7_I2C_CR1_WUPEN; + + if (!i2c_dev->wakeup_src) + return; + + if (enable) { + device_set_wakeup_enable(i2c_dev->dev, true); + stm32f7_i2c_set_bits(base + STM32F7_I2C_CR1, mask); + } else { + device_set_wakeup_enable(i2c_dev->dev, false); + stm32f7_i2c_clr_bits(base + STM32F7_I2C_CR1, mask); + } +} + static int stm32f7_i2c_reg_slave(struct i2c_client *slave) { struct stm32f7_i2c_dev *i2c_dev = i2c_get_adapdata(slave->adapter); @@ -1717,6 +1770,9 @@ static int stm32f7_i2c_reg_slave(struct i2c_client *slave) if (ret < 0) return ret; + if (!stm32f7_i2c_is_slave_registered(i2c_dev)) + stm32f7_i2c_enable_wakeup(i2c_dev, true); + if (id == 0) { /* Configure Own Address 1 */ oar1 = readl_relaxed(i2c_dev->base + STM32F7_I2C_OAR1); @@ -1758,6 +1814,9 @@ static int stm32f7_i2c_reg_slave(struct i2c_client *slave) ret = 0; pm_free: + if (!stm32f7_i2c_is_slave_registered(i2c_dev)) + stm32f7_i2c_enable_wakeup(i2c_dev, false); + pm_runtime_mark_last_busy(dev); pm_runtime_put_autosuspend(dev); @@ -1791,8 +1850,10 @@ static int stm32f7_i2c_unreg_slave(struct i2c_client *slave) i2c_dev->slave[id] = NULL; - if (!(stm32f7_i2c_is_slave_registered(i2c_dev))) + if (!stm32f7_i2c_is_slave_registered(i2c_dev)) { stm32f7_i2c_disable_irq(i2c_dev, STM32F7_I2C_ALL_IRQ_MASK); + stm32f7_i2c_enable_wakeup(i2c_dev, false); + } pm_runtime_mark_last_busy(i2c_dev->dev); pm_runtime_put_autosuspend(i2c_dev->dev); @@ -1800,28 +1861,51 @@ static int stm32f7_i2c_unreg_slave(struct i2c_client *slave) return 0; } +static int stm32f7_i2c_write_fm_plus_bits(struct stm32f7_i2c_dev *i2c_dev, + bool enable) +{ + int ret; + + if (i2c_dev->speed != STM32_I2C_SPEED_FAST_PLUS || + IS_ERR_OR_NULL(i2c_dev->regmap)) + /* Optional */ + return 0; + + if (i2c_dev->fmp_sreg == i2c_dev->fmp_creg) + ret = regmap_update_bits(i2c_dev->regmap, + i2c_dev->fmp_sreg, + i2c_dev->fmp_mask, + enable ? i2c_dev->fmp_mask : 0); + else + ret = regmap_write(i2c_dev->regmap, + enable ? i2c_dev->fmp_sreg : + i2c_dev->fmp_creg, + i2c_dev->fmp_mask); + + return ret; +} + static int stm32f7_i2c_setup_fm_plus_bits(struct platform_device *pdev, struct stm32f7_i2c_dev *i2c_dev) { struct device_node *np = pdev->dev.of_node; int ret; - u32 reg, mask; i2c_dev->regmap = syscon_regmap_lookup_by_phandle(np, "st,syscfg-fmp"); - if (IS_ERR(i2c_dev->regmap)) { + if (IS_ERR(i2c_dev->regmap)) /* Optional */ return 0; - } - ret = of_property_read_u32_index(np, "st,syscfg-fmp", 1, ®); + ret = of_property_read_u32_index(np, "st,syscfg-fmp", 1, + &i2c_dev->fmp_sreg); if (ret) return ret; - ret = of_property_read_u32_index(np, "st,syscfg-fmp", 2, &mask); - if (ret) - return ret; + i2c_dev->fmp_creg = i2c_dev->fmp_sreg + + i2c_dev->setup.fmp_clr_offset; - return regmap_update_bits(i2c_dev->regmap, reg, mask, mask); + return of_property_read_u32_index(np, "st,syscfg-fmp", 2, + &i2c_dev->fmp_mask); } static u32 stm32f7_i2c_func(struct i2c_adapter *adap) @@ -1847,7 +1931,6 @@ static int stm32f7_i2c_probe(struct platform_device *pdev) struct stm32f7_i2c_dev *i2c_dev; const struct stm32f7_i2c_setup *setup; struct resource *res; - u32 clk_rate, rise_time, fall_time; struct i2c_adapter *adap; struct reset_control *rst; dma_addr_t phy_addr; @@ -1879,6 +1962,9 @@ static int stm32f7_i2c_probe(struct platform_device *pdev) return irq_error ? : -ENOENT; } + i2c_dev->wakeup_src = of_property_read_bool(pdev->dev.of_node, + "wakeup-source"); + i2c_dev->clk = devm_clk_get(&pdev->dev, NULL); if (IS_ERR(i2c_dev->clk)) { dev_err(&pdev->dev, "Error: Missing controller clock\n"); @@ -1891,20 +1977,6 @@ static int stm32f7_i2c_probe(struct platform_device *pdev) return ret; } - i2c_dev->speed = STM32_I2C_SPEED_STANDARD; - ret = device_property_read_u32(&pdev->dev, "clock-frequency", - &clk_rate); - if (!ret && clk_rate >= 1000000) { - i2c_dev->speed = STM32_I2C_SPEED_FAST_PLUS; - ret = stm32f7_i2c_setup_fm_plus_bits(pdev, i2c_dev); - if (ret) - goto clk_free; - } else if (!ret && clk_rate >= 400000) { - i2c_dev->speed = STM32_I2C_SPEED_FAST; - } else if (!ret && clk_rate >= 100000) { - i2c_dev->speed = STM32_I2C_SPEED_STANDARD; - } - rst = devm_reset_control_get(&pdev->dev, NULL); if (IS_ERR(rst)) { dev_err(&pdev->dev, "Error: Missing controller reset\n"); @@ -1944,20 +2016,19 @@ static int stm32f7_i2c_probe(struct platform_device *pdev) } i2c_dev->setup = *setup; - ret = device_property_read_u32(i2c_dev->dev, "i2c-scl-rising-time-ns", - &rise_time); - if (!ret) - i2c_dev->setup.rise_time = rise_time; - - ret = device_property_read_u32(i2c_dev->dev, "i2c-scl-falling-time-ns", - &fall_time); - if (!ret) - i2c_dev->setup.fall_time = fall_time; - ret = stm32f7_i2c_setup_timing(i2c_dev, &i2c_dev->setup); if (ret) goto clk_free; + if (i2c_dev->speed == STM32_I2C_SPEED_FAST_PLUS) { + ret = stm32f7_i2c_setup_fm_plus_bits(pdev, i2c_dev); + if (ret) + goto clk_free; + ret = stm32f7_i2c_write_fm_plus_bits(i2c_dev, true); + if (ret) + goto clk_free; + } + adap = &i2c_dev->adap; i2c_set_adapdata(adap, i2c_dev); snprintf(adap->name, sizeof(adap->name), "STM32F7 I2C(%pa)", @@ -1982,7 +2053,17 @@ static int stm32f7_i2c_probe(struct platform_device *pdev) if (ret != -EPROBE_DEFER) dev_err(&pdev->dev, "Failed to request dma error %i\n", ret); - goto clk_free; + goto fmp_clear; + } + + if (i2c_dev->wakeup_src) { + device_set_wakeup_capable(i2c_dev->dev, true); + + ret = dev_pm_set_wake_irq(i2c_dev->dev, irq_event); + if (ret) { + dev_err(i2c_dev->dev, "Failed to set wake up irq\n"); + goto clr_wakeup_capable; + } } platform_set_drvdata(pdev, i2c_dev); @@ -2014,11 +2095,21 @@ pm_disable: pm_runtime_set_suspended(i2c_dev->dev); pm_runtime_dont_use_autosuspend(i2c_dev->dev); + if (i2c_dev->wakeup_src) + dev_pm_clear_wake_irq(i2c_dev->dev); + +clr_wakeup_capable: + if (i2c_dev->wakeup_src) + device_set_wakeup_capable(i2c_dev->dev, false); + if (i2c_dev->dma) { stm32_i2c_dma_free(i2c_dev->dma); i2c_dev->dma = NULL; } +fmp_clear: + stm32f7_i2c_write_fm_plus_bits(i2c_dev, false); + clk_free: clk_disable_unprepare(i2c_dev->clk); @@ -2032,6 +2123,15 @@ static int stm32f7_i2c_remove(struct platform_device *pdev) i2c_del_adapter(&i2c_dev->adap); pm_runtime_get_sync(i2c_dev->dev); + if (i2c_dev->wakeup_src) { + dev_pm_clear_wake_irq(i2c_dev->dev); + /* + * enforce that wakeup is disabled and that the device + * is marked as non wakeup capable + */ + device_init_wakeup(i2c_dev->dev, false); + } + pm_runtime_put_noidle(i2c_dev->dev); pm_runtime_disable(i2c_dev->dev); pm_runtime_set_suspended(i2c_dev->dev); @@ -2042,6 +2142,8 @@ static int stm32f7_i2c_remove(struct platform_device *pdev) i2c_dev->dma = NULL; } + stm32f7_i2c_write_fm_plus_bits(i2c_dev, false); + clk_disable_unprepare(i2c_dev->clk); return 0; @@ -2073,8 +2175,8 @@ static int __maybe_unused stm32f7_i2c_runtime_resume(struct device *dev) return 0; } -static int __maybe_unused -stm32f7_i2c_regs_backup(struct stm32f7_i2c_dev *i2c_dev) +#ifdef CONFIG_PM_SLEEP +static int stm32f7_i2c_regs_backup(struct stm32f7_i2c_dev *i2c_dev) { int ret; struct stm32f7_i2c_regs *backup_regs = &i2c_dev->backup_regs; @@ -2087,16 +2189,15 @@ stm32f7_i2c_regs_backup(struct stm32f7_i2c_dev *i2c_dev) backup_regs->cr2 = readl_relaxed(i2c_dev->base + STM32F7_I2C_CR2); backup_regs->oar1 = readl_relaxed(i2c_dev->base + STM32F7_I2C_OAR1); backup_regs->oar2 = readl_relaxed(i2c_dev->base + STM32F7_I2C_OAR2); - backup_regs->pecr = readl_relaxed(i2c_dev->base + STM32F7_I2C_PECR); backup_regs->tmgr = readl_relaxed(i2c_dev->base + STM32F7_I2C_TIMINGR); + stm32f7_i2c_write_fm_plus_bits(i2c_dev, false); pm_runtime_put_sync(i2c_dev->dev); return ret; } -static int __maybe_unused -stm32f7_i2c_regs_restore(struct stm32f7_i2c_dev *i2c_dev) +static int stm32f7_i2c_regs_restore(struct stm32f7_i2c_dev *i2c_dev) { u32 cr1; int ret; @@ -2120,48 +2221,55 @@ stm32f7_i2c_regs_restore(struct stm32f7_i2c_dev *i2c_dev) writel_relaxed(backup_regs->cr2, i2c_dev->base + STM32F7_I2C_CR2); writel_relaxed(backup_regs->oar1, i2c_dev->base + STM32F7_I2C_OAR1); writel_relaxed(backup_regs->oar2, i2c_dev->base + STM32F7_I2C_OAR2); - writel_relaxed(backup_regs->pecr, i2c_dev->base + STM32F7_I2C_PECR); + stm32f7_i2c_write_fm_plus_bits(i2c_dev, true); pm_runtime_put_sync(i2c_dev->dev); return ret; } -static int __maybe_unused stm32f7_i2c_suspend(struct device *dev) +static int stm32f7_i2c_suspend(struct device *dev) { struct stm32f7_i2c_dev *i2c_dev = dev_get_drvdata(dev); int ret; i2c_mark_adapter_suspended(&i2c_dev->adap); - ret = stm32f7_i2c_regs_backup(i2c_dev); - if (ret < 0) { - i2c_mark_adapter_resumed(&i2c_dev->adap); - return ret; - } - pinctrl_pm_select_sleep_state(dev); - pm_runtime_force_suspend(dev); + if (!device_may_wakeup(dev) && !dev->power.wakeup_path) { + ret = stm32f7_i2c_regs_backup(i2c_dev); + if (ret < 0) { + i2c_mark_adapter_resumed(&i2c_dev->adap); + return ret; + } + + pinctrl_pm_select_sleep_state(dev); + pm_runtime_force_suspend(dev); + } return 0; } -static int __maybe_unused stm32f7_i2c_resume(struct device *dev) +static int stm32f7_i2c_resume(struct device *dev) { struct stm32f7_i2c_dev *i2c_dev = dev_get_drvdata(dev); int ret; - ret = pm_runtime_force_resume(dev); - if (ret < 0) - return ret; - pinctrl_pm_select_default_state(dev); + if (!device_may_wakeup(dev) && !dev->power.wakeup_path) { + ret = pm_runtime_force_resume(dev); + if (ret < 0) + return ret; + pinctrl_pm_select_default_state(dev); + + ret = stm32f7_i2c_regs_restore(i2c_dev); + if (ret < 0) + return ret; + } - ret = stm32f7_i2c_regs_restore(i2c_dev); - if (ret < 0) - return ret; i2c_mark_adapter_resumed(&i2c_dev->adap); return 0; } +#endif static const struct dev_pm_ops stm32f7_i2c_pm_ops = { SET_RUNTIME_PM_OPS(stm32f7_i2c_runtime_suspend, @@ -2171,6 +2279,7 @@ static const struct dev_pm_ops stm32f7_i2c_pm_ops = { static const struct of_device_id stm32f7_i2c_match[] = { { .compatible = "st,stm32f7-i2c", .data = &stm32f7_setup}, + { .compatible = "st,stm32mp15-i2c", .data = &stm32mp15_setup}, {}, }; MODULE_DEVICE_TABLE(of, stm32f7_i2c_match); diff --git a/drivers/i2c/busses/i2c-stu300.c b/drivers/i2c/busses/i2c-stu300.c index 42e0a53e7fa4..ba6b60caa45e 100644 --- a/drivers/i2c/busses/i2c-stu300.c +++ b/drivers/i2c/busses/i2c-stu300.c @@ -132,7 +132,7 @@ enum stu300_error { #define NUM_ADDR_RESEND_ATTEMPTS 12 /* I2C clock speed, in Hz 0-400kHz*/ -static unsigned int scl_frequency = 100000; +static unsigned int scl_frequency = I2C_MAX_STANDARD_MODE_FREQ; module_param(scl_frequency, uint, 0644); /** @@ -497,7 +497,7 @@ static int stu300_set_clk(struct stu300_dev *dev, unsigned long clkrate) dev_dbg(&dev->pdev->dev, "Clock rate %lu Hz, I2C bus speed %d Hz " "virtbase %p\n", clkrate, dev->speed, dev->virtbase); - if (dev->speed > 100000) + if (dev->speed > I2C_MAX_STANDARD_MODE_FREQ) /* Fast Mode I2C */ val = ((clkrate/dev->speed) - 9)/3 + 1; else @@ -518,7 +518,7 @@ static int stu300_set_clk(struct stu300_dev *dev, unsigned long clkrate) return -EINVAL; } - if (dev->speed > 100000) { + if (dev->speed > I2C_MAX_STANDARD_MODE_FREQ) { /* CC6..CC0 */ stu300_wr8((val & I2C_CCR_CC_MASK) | I2C_CCR_FMSM, dev->virtbase + I2C_CCR); diff --git a/drivers/i2c/busses/i2c-sun6i-p2wi.c b/drivers/i2c/busses/i2c-sun6i-p2wi.c index 7c07ce116e38..e5293f0b3318 100644 --- a/drivers/i2c/busses/i2c-sun6i-p2wi.c +++ b/drivers/i2c/busses/i2c-sun6i-p2wi.c @@ -186,7 +186,7 @@ static int p2wi_probe(struct platform_device *pdev) struct device_node *np = dev->of_node; struct device_node *childnp; unsigned long parent_clk_freq; - u32 clk_freq = 100000; + u32 clk_freq = I2C_MAX_STANDARD_MODE_FREQ; struct resource *r; struct p2wi *p2wi; u32 slave_addr; diff --git a/drivers/i2c/busses/i2c-synquacer.c b/drivers/i2c/busses/i2c-synquacer.c index 86026798b4f7..9099d0a67ace 100644 --- a/drivers/i2c/busses/i2c-synquacer.c +++ b/drivers/i2c/busses/i2c-synquacer.c @@ -67,10 +67,10 @@ /* STANDARD MODE frequency */ #define SYNQUACER_I2C_CLK_MASTER_STD(rate) \ - DIV_ROUND_UP(DIV_ROUND_UP((rate), 100000) - 2, 2) + DIV_ROUND_UP(DIV_ROUND_UP((rate), I2C_MAX_STANDARD_MODE_FREQ) - 2, 2) /* FAST MODE frequency */ #define SYNQUACER_I2C_CLK_MASTER_FAST(rate) \ - DIV_ROUND_UP((DIV_ROUND_UP((rate), 400000) - 2) * 2, 3) + DIV_ROUND_UP((DIV_ROUND_UP((rate), I2C_MAX_FAST_MODE_FREQ) - 2) * 2, 3) /* (clkrate <= 18000000) */ /* calculate the value of CS bits in CCR register on standard mode */ @@ -602,7 +602,7 @@ static int synquacer_i2c_probe(struct platform_device *pdev) i2c->adapter.nr = pdev->id; init_completion(&i2c->completion); - if (bus_speed < 400000) + if (bus_speed < I2C_MAX_FAST_MODE_FREQ) i2c->speed_khz = SYNQUACER_I2C_SPEED_SM; else i2c->speed_khz = SYNQUACER_I2C_SPEED_FM; diff --git a/drivers/i2c/busses/i2c-tegra.c b/drivers/i2c/busses/i2c-tegra.c index cbc2ad49043e..4c4d17ddc96b 100644 --- a/drivers/i2c/busses/i2c-tegra.c +++ b/drivers/i2c/busses/i2c-tegra.c @@ -123,10 +123,6 @@ #define I2C_THIGH_SHIFT 8 #define I2C_INTERFACE_TIMING_1 0x98 -#define I2C_STANDARD_MODE 100000 -#define I2C_FAST_MODE 400000 -#define I2C_FAST_PLUS_MODE 1000000 - /* Packet header size in bytes */ #define I2C_PACKET_HEADER_SIZE 12 @@ -737,8 +733,8 @@ static int tegra_i2c_init(struct tegra_i2c_dev *i2c_dev, bool clk_reinit) I2C_CLK_DIVISOR_STD_FAST_MODE_SHIFT; i2c_writel(i2c_dev, clk_divisor, I2C_CLK_DIVISOR); - if (i2c_dev->bus_clk_rate > I2C_STANDARD_MODE && - i2c_dev->bus_clk_rate <= I2C_FAST_PLUS_MODE) { + if (i2c_dev->bus_clk_rate > I2C_MAX_STANDARD_MODE_FREQ && + i2c_dev->bus_clk_rate <= I2C_MAX_FAST_MODE_PLUS_FREQ) { tlow = i2c_dev->hw->tlow_fast_fastplus_mode; thigh = i2c_dev->hw->thigh_fast_fastplus_mode; tsu_thd = i2c_dev->hw->setup_hold_time_fast_fast_plus_mode; @@ -1341,7 +1337,7 @@ static void tegra_i2c_parse_dt(struct tegra_i2c_dev *i2c_dev) ret = of_property_read_u32(np, "clock-frequency", &i2c_dev->bus_clk_rate); if (ret) - i2c_dev->bus_clk_rate = 100000; /* default clock rate */ + i2c_dev->bus_clk_rate = I2C_MAX_STANDARD_MODE_FREQ; /* default clock rate */ multi_mode = of_property_read_bool(np, "multi-master"); i2c_dev->is_multimaster_mode = multi_mode; @@ -1640,12 +1636,12 @@ static int tegra_i2c_probe(struct platform_device *pdev) } } - if (i2c_dev->bus_clk_rate > I2C_FAST_MODE && - i2c_dev->bus_clk_rate <= I2C_FAST_PLUS_MODE) + if (i2c_dev->bus_clk_rate > I2C_MAX_FAST_MODE_FREQ && + i2c_dev->bus_clk_rate <= I2C_MAX_FAST_MODE_PLUS_FREQ) i2c_dev->clk_divisor_non_hs_mode = i2c_dev->hw->clk_divisor_fast_plus_mode; - else if (i2c_dev->bus_clk_rate > I2C_STANDARD_MODE && - i2c_dev->bus_clk_rate <= I2C_FAST_MODE) + else if (i2c_dev->bus_clk_rate > I2C_MAX_STANDARD_MODE_FREQ && + i2c_dev->bus_clk_rate <= I2C_MAX_FAST_MODE_FREQ) i2c_dev->clk_divisor_non_hs_mode = i2c_dev->hw->clk_divisor_fast_mode; else diff --git a/drivers/i2c/busses/i2c-thunderx-pcidrv.c b/drivers/i2c/busses/i2c-thunderx-pcidrv.c index 19f8eec38717..12c90aa0900e 100644 --- a/drivers/i2c/busses/i2c-thunderx-pcidrv.c +++ b/drivers/i2c/busses/i2c-thunderx-pcidrv.c @@ -118,6 +118,8 @@ static void thunder_i2c_clock_disable(struct device *dev, struct clk *clk) static int thunder_i2c_smbus_setup_of(struct octeon_i2c *i2c, struct device_node *node) { + struct i2c_client *ara; + if (!node) return -EINVAL; @@ -125,9 +127,12 @@ static int thunder_i2c_smbus_setup_of(struct octeon_i2c *i2c, if (!i2c->alert_data.irq) return -EINVAL; - i2c->ara = i2c_setup_smbus_alert(&i2c->adap, &i2c->alert_data); - if (!i2c->ara) - return -ENODEV; + ara = i2c_new_smbus_alert_device(&i2c->adap, &i2c->alert_data); + if (IS_ERR(ara)) + return PTR_ERR(ara); + + i2c->ara = ara; + return 0; } @@ -178,7 +183,7 @@ static int thunder_i2c_probe_pci(struct pci_dev *pdev, thunder_i2c_clock_enable(dev, i2c); ret = device_property_read_u32(dev, "clock-frequency", &i2c->twsi_freq); if (ret) - i2c->twsi_freq = 100000; + i2c->twsi_freq = I2C_MAX_STANDARD_MODE_FREQ; init_waitqueue_head(&i2c->queue); diff --git a/drivers/i2c/busses/i2c-uniphier-f.c b/drivers/i2c/busses/i2c-uniphier-f.c index 4241aac79e7e..2b258d54d68c 100644 --- a/drivers/i2c/busses/i2c-uniphier-f.c +++ b/drivers/i2c/busses/i2c-uniphier-f.c @@ -73,8 +73,6 @@ #define UNIPHIER_FI2C_BYTE_WISE BIT(3) #define UNIPHIER_FI2C_DEFER_STOP_COMP BIT(4) -#define UNIPHIER_FI2C_DEFAULT_SPEED 100000 -#define UNIPHIER_FI2C_MAX_SPEED 400000 #define UNIPHIER_FI2C_FIFO_SIZE 8 struct uniphier_fi2c_priv { @@ -537,9 +535,9 @@ static int uniphier_fi2c_probe(struct platform_device *pdev) } if (of_property_read_u32(dev->of_node, "clock-frequency", &bus_speed)) - bus_speed = UNIPHIER_FI2C_DEFAULT_SPEED; + bus_speed = I2C_MAX_STANDARD_MODE_FREQ; - if (!bus_speed || bus_speed > UNIPHIER_FI2C_MAX_SPEED) { + if (!bus_speed || bus_speed > I2C_MAX_FAST_MODE_FREQ) { dev_err(dev, "invalid clock-frequency %d\n", bus_speed); return -EINVAL; } diff --git a/drivers/i2c/busses/i2c-uniphier.c b/drivers/i2c/busses/i2c-uniphier.c index 0270090c0360..668b1fa2b0ef 100644 --- a/drivers/i2c/busses/i2c-uniphier.c +++ b/drivers/i2c/busses/i2c-uniphier.c @@ -35,9 +35,6 @@ #define UNIPHIER_I2C_NOISE 0x1c /* noise filter control */ #define UNIPHIER_I2C_SETUP 0x20 /* setup time control */ -#define UNIPHIER_I2C_DEFAULT_SPEED 100000 -#define UNIPHIER_I2C_MAX_SPEED 400000 - struct uniphier_i2c_priv { struct completion comp; struct i2c_adapter adap; @@ -333,9 +330,9 @@ static int uniphier_i2c_probe(struct platform_device *pdev) } if (of_property_read_u32(dev->of_node, "clock-frequency", &bus_speed)) - bus_speed = UNIPHIER_I2C_DEFAULT_SPEED; + bus_speed = I2C_MAX_STANDARD_MODE_FREQ; - if (!bus_speed || bus_speed > UNIPHIER_I2C_MAX_SPEED) { + if (!bus_speed || bus_speed > I2C_MAX_FAST_MODE_FREQ) { dev_err(dev, "invalid clock-frequency %d\n", bus_speed); return -EINVAL; } diff --git a/drivers/i2c/busses/i2c-wmt.c b/drivers/i2c/busses/i2c-wmt.c index 524017f7034e..88f5aafdce5b 100644 --- a/drivers/i2c/busses/i2c-wmt.c +++ b/drivers/i2c/busses/i2c-wmt.c @@ -399,7 +399,7 @@ static int wmt_i2c_probe(struct platform_device *pdev) i2c_dev->mode = I2C_MODE_STANDARD; err = of_property_read_u32(np, "clock-frequency", &clk_rate); - if ((!err) && (clk_rate == 400000)) + if (!err && (clk_rate == I2C_MAX_FAST_MODE_FREQ)) i2c_dev->mode = I2C_MODE_FAST; i2c_dev->dev = &pdev->dev; diff --git a/drivers/i2c/busses/i2c-xlp9xx.c b/drivers/i2c/busses/i2c-xlp9xx.c index 8a873975cf12..391c878a7cdc 100644 --- a/drivers/i2c/busses/i2c-xlp9xx.c +++ b/drivers/i2c/busses/i2c-xlp9xx.c @@ -71,8 +71,6 @@ #define XLP9XX_I2C_SLAVEADDR_ADDR_SHIFT 1 #define XLP9XX_I2C_IP_CLK_FREQ 133000000UL -#define XLP9XX_I2C_DEFAULT_FREQ 100000 -#define XLP9XX_I2C_HIGH_FREQ 400000 #define XLP9XX_I2C_FIFO_SIZE 0x80U #define XLP9XX_I2C_TIMEOUT_MS 1000 #define XLP9XX_I2C_BUSY_TIMEOUT 50 @@ -476,12 +474,12 @@ static int xlp9xx_i2c_get_frequency(struct platform_device *pdev, err = device_property_read_u32(&pdev->dev, "clock-frequency", &freq); if (err) { - freq = XLP9XX_I2C_DEFAULT_FREQ; + freq = I2C_MAX_STANDARD_MODE_FREQ; dev_dbg(&pdev->dev, "using default frequency %u\n", freq); - } else if (freq == 0 || freq > XLP9XX_I2C_HIGH_FREQ) { + } else if (freq == 0 || freq > I2C_MAX_FAST_MODE_FREQ) { dev_warn(&pdev->dev, "invalid frequency %u, using default\n", freq); - freq = XLP9XX_I2C_DEFAULT_FREQ; + freq = I2C_MAX_STANDARD_MODE_FREQ; } priv->clk_hz = freq; @@ -491,12 +489,16 @@ static int xlp9xx_i2c_get_frequency(struct platform_device *pdev, static int xlp9xx_i2c_smbus_setup(struct xlp9xx_i2c_dev *priv, struct platform_device *pdev) { + struct i2c_client *ara; + if (!priv->alert_data.irq) return -EINVAL; - priv->ara = i2c_setup_smbus_alert(&priv->adapter, &priv->alert_data); - if (!priv->ara) - return -ENODEV; + ara = i2c_new_smbus_alert_device(&priv->adapter, &priv->alert_data); + if (IS_ERR(ara)) + return PTR_ERR(ara); + + priv->ara = ara; return 0; } diff --git a/drivers/i2c/busses/i2c-xlr.c b/drivers/i2c/busses/i2c-xlr.c index 34cd4b308540..282f161a8b08 100644 --- a/drivers/i2c/busses/i2c-xlr.c +++ b/drivers/i2c/busses/i2c-xlr.c @@ -404,7 +404,7 @@ static int xlr_i2c_probe(struct platform_device *pdev) if (of_property_read_u32(pdev->dev.of_node, "clock-frequency", &busfreq)) - busfreq = 100000; + busfreq = I2C_MAX_STANDARD_MODE_FREQ; clk = devm_clk_get(&pdev->dev, NULL); if (!IS_ERR(clk)) { |