diff options
Diffstat (limited to 'drivers/gpu/drm/mcde')
| -rw-r--r-- | drivers/gpu/drm/mcde/Kconfig | 1 | ||||
| -rw-r--r-- | drivers/gpu/drm/mcde/Makefile | 2 | ||||
| -rw-r--r-- | drivers/gpu/drm/mcde/mcde_clk_div.c | 192 | ||||
| -rw-r--r-- | drivers/gpu/drm/mcde/mcde_display.c | 456 | ||||
| -rw-r--r-- | drivers/gpu/drm/mcde/mcde_display_regs.h | 91 | ||||
| -rw-r--r-- | drivers/gpu/drm/mcde/mcde_drm.h | 10 | ||||
| -rw-r--r-- | drivers/gpu/drm/mcde/mcde_drv.c | 46 |
7 files changed, 680 insertions, 118 deletions
diff --git a/drivers/gpu/drm/mcde/Kconfig b/drivers/gpu/drm/mcde/Kconfig index b3990126562c..71c689b573c9 100644 --- a/drivers/gpu/drm/mcde/Kconfig +++ b/drivers/gpu/drm/mcde/Kconfig @@ -4,6 +4,7 @@ config DRM_MCDE depends on CMA depends on ARM || COMPILE_TEST depends on OF + depends on COMMON_CLK select MFD_SYSCON select DRM_MIPI_DSI select DRM_BRIDGE diff --git a/drivers/gpu/drm/mcde/Makefile b/drivers/gpu/drm/mcde/Makefile index fe28f4e0fe46..15d9c89a3273 100644 --- a/drivers/gpu/drm/mcde/Makefile +++ b/drivers/gpu/drm/mcde/Makefile @@ -1,3 +1,3 @@ -mcde_drm-y += mcde_drv.o mcde_dsi.o mcde_display.o +mcde_drm-y += mcde_drv.o mcde_dsi.o mcde_clk_div.o mcde_display.o obj-$(CONFIG_DRM_MCDE) += mcde_drm.o diff --git a/drivers/gpu/drm/mcde/mcde_clk_div.c b/drivers/gpu/drm/mcde/mcde_clk_div.c new file mode 100644 index 000000000000..038821d2ef80 --- /dev/null +++ b/drivers/gpu/drm/mcde/mcde_clk_div.c @@ -0,0 +1,192 @@ +// SPDX-License-Identifier: GPL-2.0 +#include <linux/clk-provider.h> +#include <linux/regulator/consumer.h> + +#include "mcde_drm.h" +#include "mcde_display_regs.h" + +/* The MCDE internal clock dividers for FIFO A and B */ +struct mcde_clk_div { + struct clk_hw hw; + struct mcde *mcde; + u32 cr; + u32 cr_div; +}; + +static int mcde_clk_div_enable(struct clk_hw *hw) +{ + struct mcde_clk_div *cdiv = container_of(hw, struct mcde_clk_div, hw); + struct mcde *mcde = cdiv->mcde; + u32 val; + + spin_lock(&mcde->fifo_crx1_lock); + val = readl(mcde->regs + cdiv->cr); + /* + * Select the PLL72 (LCD) clock as parent + * FIXME: implement other parents. + */ + val &= ~MCDE_CRX1_CLKSEL_MASK; + val |= MCDE_CRX1_CLKSEL_CLKPLL72 << MCDE_CRX1_CLKSEL_SHIFT; + /* Internal clock */ + val |= MCDE_CRA1_CLKTYPE_TVXCLKSEL1; + + /* Clear then set the divider */ + val &= ~(MCDE_CRX1_BCD | MCDE_CRX1_PCD_MASK); + val |= cdiv->cr_div; + + writel(val, mcde->regs + cdiv->cr); + spin_unlock(&mcde->fifo_crx1_lock); + + return 0; +} + +static int mcde_clk_div_choose_div(struct clk_hw *hw, unsigned long rate, + unsigned long *prate, bool set_parent) +{ + int best_div = 1, div; + struct clk_hw *parent = clk_hw_get_parent(hw); + unsigned long best_prate = 0; + unsigned long best_diff = ~0ul; + int max_div = (1 << MCDE_CRX1_PCD_BITS) - 1; + + for (div = 1; div < max_div; div++) { + unsigned long this_prate, div_rate, diff; + + if (set_parent) + this_prate = clk_hw_round_rate(parent, rate * div); + else + this_prate = *prate; + div_rate = DIV_ROUND_UP_ULL(this_prate, div); + diff = abs(rate - div_rate); + + if (diff < best_diff) { + best_div = div; + best_diff = diff; + best_prate = this_prate; + } + } + + *prate = best_prate; + return best_div; +} + +static long mcde_clk_div_round_rate(struct clk_hw *hw, unsigned long rate, + unsigned long *prate) +{ + int div = mcde_clk_div_choose_div(hw, rate, prate, true); + + return DIV_ROUND_UP_ULL(*prate, div); +} + +static unsigned long mcde_clk_div_recalc_rate(struct clk_hw *hw, + unsigned long prate) +{ + struct mcde_clk_div *cdiv = container_of(hw, struct mcde_clk_div, hw); + struct mcde *mcde = cdiv->mcde; + u32 cr; + int div; + + /* + * If the MCDE is not powered we can't access registers. + * It will come up with 0 in the divider register bits, which + * means "divide by 2". + */ + if (!regulator_is_enabled(mcde->epod)) + return DIV_ROUND_UP_ULL(prate, 2); + + cr = readl(mcde->regs + cdiv->cr); + if (cr & MCDE_CRX1_BCD) + return prate; + + /* 0 in the PCD means "divide by 2", 1 means "divide by 3" etc */ + div = cr & MCDE_CRX1_PCD_MASK; + div += 2; + + return DIV_ROUND_UP_ULL(prate, div); +} + +static int mcde_clk_div_set_rate(struct clk_hw *hw, unsigned long rate, + unsigned long prate) +{ + struct mcde_clk_div *cdiv = container_of(hw, struct mcde_clk_div, hw); + int div = mcde_clk_div_choose_div(hw, rate, &prate, false); + u32 cr = 0; + + /* + * We cache the CR bits to set the divide in the state so that + * we can call this before we can even write to the hardware. + */ + if (div == 1) { + /* Bypass clock divider */ + cr |= MCDE_CRX1_BCD; + } else { + div -= 2; + cr |= div & MCDE_CRX1_PCD_MASK; + } + cdiv->cr_div = cr; + + return 0; +} + +static const struct clk_ops mcde_clk_div_ops = { + .enable = mcde_clk_div_enable, + .recalc_rate = mcde_clk_div_recalc_rate, + .round_rate = mcde_clk_div_round_rate, + .set_rate = mcde_clk_div_set_rate, +}; + +int mcde_init_clock_divider(struct mcde *mcde) +{ + struct device *dev = mcde->dev; + struct mcde_clk_div *fifoa; + struct mcde_clk_div *fifob; + const char *parent_name; + struct clk_init_data fifoa_init = { + .name = "fifoa", + .ops = &mcde_clk_div_ops, + .parent_names = &parent_name, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + }; + struct clk_init_data fifob_init = { + .name = "fifob", + .ops = &mcde_clk_div_ops, + .parent_names = &parent_name, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + }; + int ret; + + spin_lock_init(&mcde->fifo_crx1_lock); + parent_name = __clk_get_name(mcde->lcd_clk); + + /* Allocate 2 clocks */ + fifoa = devm_kzalloc(dev, sizeof(*fifoa), GFP_KERNEL); + if (!fifoa) + return -ENOMEM; + fifob = devm_kzalloc(dev, sizeof(*fifob), GFP_KERNEL); + if (!fifob) + return -ENOMEM; + + fifoa->mcde = mcde; + fifoa->cr = MCDE_CRA1; + fifoa->hw.init = &fifoa_init; + ret = devm_clk_hw_register(dev, &fifoa->hw); + if (ret) { + dev_err(dev, "error registering FIFO A clock divider\n"); + return ret; + } + mcde->fifoa_clk = fifoa->hw.clk; + + fifob->mcde = mcde; + fifob->cr = MCDE_CRB1; + fifob->hw.init = &fifob_init; + ret = devm_clk_hw_register(dev, &fifob->hw); + if (ret) { + dev_err(dev, "error registering FIFO B clock divider\n"); + return ret; + } + mcde->fifob_clk = fifob->hw.clk; + + return 0; +} diff --git a/drivers/gpu/drm/mcde/mcde_display.c b/drivers/gpu/drm/mcde/mcde_display.c index c271e5bf042e..7c2e0b865441 100644 --- a/drivers/gpu/drm/mcde/mcde_display.c +++ b/drivers/gpu/drm/mcde/mcde_display.c @@ -8,6 +8,7 @@ #include <linux/delay.h> #include <linux/dma-buf.h> #include <linux/regulator/consumer.h> +#include <linux/media-bus-format.h> #include <drm/drm_device.h> #include <drm/drm_fb_cma_helper.h> @@ -16,6 +17,7 @@ #include <drm/drm_gem_framebuffer_helper.h> #include <drm/drm_mipi_dsi.h> #include <drm/drm_simple_kms_helper.h> +#include <drm/drm_bridge.h> #include <drm/drm_vblank.h> #include <video/mipi_display.h> @@ -57,10 +59,15 @@ enum mcde_overlay { MCDE_OVERLAY_5, }; -enum mcde_dsi_formatter { +enum mcde_formatter { MCDE_DSI_FORMATTER_0 = 0, MCDE_DSI_FORMATTER_1, MCDE_DSI_FORMATTER_2, + MCDE_DSI_FORMATTER_3, + MCDE_DSI_FORMATTER_4, + MCDE_DSI_FORMATTER_5, + MCDE_DPI_FORMATTER_0, + MCDE_DPI_FORMATTER_1, }; void mcde_display_irq(struct mcde *mcde) @@ -81,7 +88,7 @@ void mcde_display_irq(struct mcde *mcde) * * TODO: Currently only one DSI link is supported. */ - if (mcde_dsi_irq(mcde->mdsi)) { + if (!mcde->dpi_output && mcde_dsi_irq(mcde->mdsi)) { u32 val; /* @@ -243,73 +250,70 @@ static int mcde_configure_extsrc(struct mcde *mcde, enum mcde_extsrc src, val = 0 << MCDE_EXTSRCXCONF_BUF_ID_SHIFT; val |= 1 << MCDE_EXTSRCXCONF_BUF_NB_SHIFT; val |= 0 << MCDE_EXTSRCXCONF_PRI_OVLID_SHIFT; - /* - * MCDE has inverse semantics from DRM on RBG/BGR which is why - * all the modes are inversed here. - */ + switch (format) { case DRM_FORMAT_ARGB8888: val |= MCDE_EXTSRCXCONF_BPP_ARGB8888 << MCDE_EXTSRCXCONF_BPP_SHIFT; - val |= MCDE_EXTSRCXCONF_BGR; break; case DRM_FORMAT_ABGR8888: val |= MCDE_EXTSRCXCONF_BPP_ARGB8888 << MCDE_EXTSRCXCONF_BPP_SHIFT; + val |= MCDE_EXTSRCXCONF_BGR; break; case DRM_FORMAT_XRGB8888: val |= MCDE_EXTSRCXCONF_BPP_XRGB8888 << MCDE_EXTSRCXCONF_BPP_SHIFT; - val |= MCDE_EXTSRCXCONF_BGR; break; case DRM_FORMAT_XBGR8888: val |= MCDE_EXTSRCXCONF_BPP_XRGB8888 << MCDE_EXTSRCXCONF_BPP_SHIFT; + val |= MCDE_EXTSRCXCONF_BGR; break; case DRM_FORMAT_RGB888: val |= MCDE_EXTSRCXCONF_BPP_RGB888 << MCDE_EXTSRCXCONF_BPP_SHIFT; - val |= MCDE_EXTSRCXCONF_BGR; break; case DRM_FORMAT_BGR888: val |= MCDE_EXTSRCXCONF_BPP_RGB888 << MCDE_EXTSRCXCONF_BPP_SHIFT; + val |= MCDE_EXTSRCXCONF_BGR; break; case DRM_FORMAT_ARGB4444: val |= MCDE_EXTSRCXCONF_BPP_ARGB4444 << MCDE_EXTSRCXCONF_BPP_SHIFT; - val |= MCDE_EXTSRCXCONF_BGR; break; case DRM_FORMAT_ABGR4444: val |= MCDE_EXTSRCXCONF_BPP_ARGB4444 << MCDE_EXTSRCXCONF_BPP_SHIFT; + val |= MCDE_EXTSRCXCONF_BGR; break; case DRM_FORMAT_XRGB4444: val |= MCDE_EXTSRCXCONF_BPP_RGB444 << MCDE_EXTSRCXCONF_BPP_SHIFT; - val |= MCDE_EXTSRCXCONF_BGR; break; case DRM_FORMAT_XBGR4444: val |= MCDE_EXTSRCXCONF_BPP_RGB444 << MCDE_EXTSRCXCONF_BPP_SHIFT; + val |= MCDE_EXTSRCXCONF_BGR; break; case DRM_FORMAT_XRGB1555: val |= MCDE_EXTSRCXCONF_BPP_IRGB1555 << MCDE_EXTSRCXCONF_BPP_SHIFT; - val |= MCDE_EXTSRCXCONF_BGR; break; case DRM_FORMAT_XBGR1555: val |= MCDE_EXTSRCXCONF_BPP_IRGB1555 << MCDE_EXTSRCXCONF_BPP_SHIFT; + val |= MCDE_EXTSRCXCONF_BGR; break; case DRM_FORMAT_RGB565: val |= MCDE_EXTSRCXCONF_BPP_RGB565 << MCDE_EXTSRCXCONF_BPP_SHIFT; - val |= MCDE_EXTSRCXCONF_BGR; break; case DRM_FORMAT_BGR565: val |= MCDE_EXTSRCXCONF_BPP_RGB565 << MCDE_EXTSRCXCONF_BPP_SHIFT; + val |= MCDE_EXTSRCXCONF_BGR; break; case DRM_FORMAT_YUV422: val |= MCDE_EXTSRCXCONF_BPP_YCBCR422 << @@ -556,6 +560,7 @@ static void mcde_configure_channel(struct mcde *mcde, enum mcde_channel ch, << MCDE_CHNLXSYNCHMOD_OUT_SYNCH_SRC_SHIFT; break; case MCDE_VIDEO_FORMATTER_FLOW: + case MCDE_DPI_FORMATTER_FLOW: val = MCDE_CHNLXSYNCHMOD_SRC_SYNCH_HARDWARE << MCDE_CHNLXSYNCHMOD_SRC_SYNCH_SHIFT; val |= MCDE_CHNLXSYNCHMOD_OUT_SYNCH_SRC_FORMATTER @@ -564,7 +569,7 @@ static void mcde_configure_channel(struct mcde *mcde, enum mcde_channel ch, default: dev_err(mcde->dev, "unknown flow mode %d\n", mcde->flow_mode); - break; + return; } writel(val, mcde->regs + sync); @@ -594,10 +599,35 @@ static void mcde_configure_channel(struct mcde *mcde, enum mcde_channel ch, mcde->regs + mux); break; } + + /* + * If using DPI configure the sync event. + * TODO: this is for LCD only, it does not cover TV out. + */ + if (mcde->dpi_output) { + u32 stripwidth; + + stripwidth = 0xF000 / (mode->vdisplay * 4); + dev_info(mcde->dev, "stripwidth: %d\n", stripwidth); + + val = MCDE_SYNCHCONF_HWREQVEVENT_ACTIVE_VIDEO | + (mode->hdisplay - 1 - stripwidth) << MCDE_SYNCHCONF_HWREQVCNT_SHIFT | + MCDE_SYNCHCONF_SWINTVEVENT_ACTIVE_VIDEO | + (mode->hdisplay - 1 - stripwidth) << MCDE_SYNCHCONF_SWINTVCNT_SHIFT; + + switch (fifo) { + case MCDE_FIFO_A: + writel(val, mcde->regs + MCDE_SYNCHCONFA); + break; + case MCDE_FIFO_B: + writel(val, mcde->regs + MCDE_SYNCHCONFB); + break; + } + } } static void mcde_configure_fifo(struct mcde *mcde, enum mcde_fifo fifo, - enum mcde_dsi_formatter fmt, + enum mcde_formatter fmt, int fifo_wtrmrk) { u32 val; @@ -618,12 +648,49 @@ static void mcde_configure_fifo(struct mcde *mcde, enum mcde_fifo fifo, } val = fifo_wtrmrk << MCDE_CTRLX_FIFOWTRMRK_SHIFT; - /* We only support DSI formatting for now */ - val |= MCDE_CTRLX_FORMTYPE_DSI << - MCDE_CTRLX_FORMTYPE_SHIFT; - /* Select the formatter to use for this FIFO */ - val |= fmt << MCDE_CTRLX_FORMID_SHIFT; + /* + * Select the formatter to use for this FIFO + * + * The register definitions imply that different IDs should be used + * by the DSI formatters depending on if they are in VID or CMD + * mode, and the manual says they are dedicated but identical. + * The vendor code uses them as it seems fit. + */ + switch (fmt) { + case MCDE_DSI_FORMATTER_0: + val |= MCDE_CTRLX_FORMTYPE_DSI << MCDE_CTRLX_FORMTYPE_SHIFT; + val |= MCDE_CTRLX_FORMID_DSI0VID << MCDE_CTRLX_FORMID_SHIFT; + break; + case MCDE_DSI_FORMATTER_1: + val |= MCDE_CTRLX_FORMTYPE_DSI << MCDE_CTRLX_FORMTYPE_SHIFT; + val |= MCDE_CTRLX_FORMID_DSI0CMD << MCDE_CTRLX_FORMID_SHIFT; + break; + case MCDE_DSI_FORMATTER_2: + val |= MCDE_CTRLX_FORMTYPE_DSI << MCDE_CTRLX_FORMTYPE_SHIFT; + val |= MCDE_CTRLX_FORMID_DSI1VID << MCDE_CTRLX_FORMID_SHIFT; + break; + case MCDE_DSI_FORMATTER_3: + val |= MCDE_CTRLX_FORMTYPE_DSI << MCDE_CTRLX_FORMTYPE_SHIFT; + val |= MCDE_CTRLX_FORMID_DSI1CMD << MCDE_CTRLX_FORMID_SHIFT; + break; + case MCDE_DSI_FORMATTER_4: + val |= MCDE_CTRLX_FORMTYPE_DSI << MCDE_CTRLX_FORMTYPE_SHIFT; + val |= MCDE_CTRLX_FORMID_DSI2VID << MCDE_CTRLX_FORMID_SHIFT; + break; + case MCDE_DSI_FORMATTER_5: + val |= MCDE_CTRLX_FORMTYPE_DSI << MCDE_CTRLX_FORMTYPE_SHIFT; + val |= MCDE_CTRLX_FORMID_DSI2CMD << MCDE_CTRLX_FORMID_SHIFT; + break; + case MCDE_DPI_FORMATTER_0: + val |= MCDE_CTRLX_FORMTYPE_DPITV << MCDE_CTRLX_FORMTYPE_SHIFT; + val |= MCDE_CTRLX_FORMID_DPIA << MCDE_CTRLX_FORMID_SHIFT; + break; + case MCDE_DPI_FORMATTER_1: + val |= MCDE_CTRLX_FORMTYPE_DPITV << MCDE_CTRLX_FORMTYPE_SHIFT; + val |= MCDE_CTRLX_FORMID_DPIB << MCDE_CTRLX_FORMID_SHIFT; + break; + } writel(val, mcde->regs + ctrl); /* Blend source with Alpha 0xff on FIFO */ @@ -631,17 +698,54 @@ static void mcde_configure_fifo(struct mcde *mcde, enum mcde_fifo fifo, 0xff << MCDE_CRX0_ALPHABLEND_SHIFT; writel(val, mcde->regs + cr0); - /* Set-up from mcde_fmtr_dsi.c, fmtr_dsi_enable_video() */ - - /* Use the MCDE clock for this FIFO */ - val = MCDE_CRX1_CLKSEL_MCDECLK << MCDE_CRX1_CLKSEL_SHIFT; + spin_lock(&mcde->fifo_crx1_lock); + val = readl(mcde->regs + cr1); + /* + * Set-up from mcde_fmtr_dsi.c, fmtr_dsi_enable_video() + * FIXME: a different clock needs to be selected for TV out. + */ + if (mcde->dpi_output) { + struct drm_connector *connector = drm_panel_bridge_connector(mcde->bridge); + u32 bus_format; + + /* Assume RGB888 24 bit if we have no further info */ + if (!connector->display_info.num_bus_formats) { + dev_info(mcde->dev, "panel does not specify bus format, assume RGB888\n"); + bus_format = MEDIA_BUS_FMT_RGB888_1X24; + } else { + bus_format = connector->display_info.bus_formats[0]; + } - /* TODO: when adding DPI support add OUTBPP etc here */ + /* + * Set up the CDWIN and OUTBPP for the LCD + * + * FIXME: fill this in if you know the correspondance between the MIPI + * DPI specification and the media bus formats. + */ + val &= ~MCDE_CRX1_CDWIN_MASK; + val &= ~MCDE_CRX1_OUTBPP_MASK; + switch (bus_format) { + case MEDIA_BUS_FMT_RGB888_1X24: + val |= MCDE_CRX1_CDWIN_24BPP << MCDE_CRX1_CDWIN_SHIFT; + val |= MCDE_CRX1_OUTBPP_24BPP << MCDE_CRX1_OUTBPP_SHIFT; + break; + default: + dev_err(mcde->dev, "unknown bus format, assume RGB888\n"); + val |= MCDE_CRX1_CDWIN_24BPP << MCDE_CRX1_CDWIN_SHIFT; + val |= MCDE_CRX1_OUTBPP_24BPP << MCDE_CRX1_OUTBPP_SHIFT; + break; + } + } else { + /* Use the MCDE clock for DSI */ + val &= ~MCDE_CRX1_CLKSEL_MASK; + val |= MCDE_CRX1_CLKSEL_MCDECLK << MCDE_CRX1_CLKSEL_SHIFT; + } writel(val, mcde->regs + cr1); + spin_unlock(&mcde->fifo_crx1_lock); }; static void mcde_configure_dsi_formatter(struct mcde *mcde, - enum mcde_dsi_formatter fmt, + enum mcde_formatter fmt, u32 formatter_frame, int pkt_size) { @@ -681,6 +785,9 @@ static void mcde_configure_dsi_formatter(struct mcde *mcde, delay0 = MCDE_DSIVID2DELAY0; delay1 = MCDE_DSIVID2DELAY1; break; + default: + dev_err(mcde->dev, "tried to configure a non-DSI formatter as DSI\n"); + return; } /* @@ -700,7 +807,9 @@ static void mcde_configure_dsi_formatter(struct mcde *mcde, MCDE_DSICONF0_PACKING_SHIFT; break; case MIPI_DSI_FMT_RGB666_PACKED: - val |= MCDE_DSICONF0_PACKING_RGB666_PACKED << + dev_err(mcde->dev, + "we cannot handle the packed RGB666 format\n"); + val |= MCDE_DSICONF0_PACKING_RGB666 << MCDE_DSICONF0_PACKING_SHIFT; break; case MIPI_DSI_FMT_RGB565: @@ -860,73 +969,140 @@ static int mcde_dsi_get_pkt_div(int ppl, int fifo_size) return 1; } -static void mcde_display_enable(struct drm_simple_display_pipe *pipe, - struct drm_crtc_state *cstate, - struct drm_plane_state *plane_state) +static void mcde_setup_dpi(struct mcde *mcde, const struct drm_display_mode *mode, + int *fifo_wtrmrk_lvl) { - struct drm_crtc *crtc = &pipe->crtc; - struct drm_plane *plane = &pipe->plane; - struct drm_device *drm = crtc->dev; - struct mcde *mcde = to_mcde(drm); - const struct drm_display_mode *mode = &cstate->mode; - struct drm_framebuffer *fb = plane->state->fb; - u32 format = fb->format->format; - u32 formatter_ppl = mode->hdisplay; /* pixels per line */ - u32 formatter_lpf = mode->vdisplay; /* lines per frame */ - int pkt_size, fifo_wtrmrk; - int cpp = fb->format->cpp[0]; - int formatter_cpp; - struct drm_format_name_buf tmp; - u32 formatter_frame; - u32 pkt_div; + struct drm_connector *connector = drm_panel_bridge_connector(mcde->bridge); + u32 hsw, hfp, hbp; + u32 vsw, vfp, vbp; u32 val; - int ret; - /* This powers up the entire MCDE block and the DSI hardware */ - ret = regulator_enable(mcde->epod); - if (ret) { - dev_err(drm->dev, "can't re-enable EPOD regulator\n"); - return; - } + /* FIXME: we only support LCD, implement TV out */ + hsw = mode->hsync_end - mode->hsync_start; + hfp = mode->hsync_start - mode->hdisplay; + hbp = mode->htotal - mode->hsync_end; + vsw = mode->vsync_end - mode->vsync_start; + vfp = mode->vsync_start - mode->vdisplay; + vbp = mode->vtotal - mode->vsync_end; - dev_info(drm->dev, "enable MCDE, %d x %d format %s\n", - mode->hdisplay, mode->vdisplay, - drm_get_format_name(format, &tmp)); - if (!mcde->mdsi) { - /* TODO: deal with this for non-DSI output */ - dev_err(drm->dev, "no DSI master attached!\n"); - return; - } + dev_info(mcde->dev, "output on DPI LCD from channel A\n"); + /* Display actual values */ + dev_info(mcde->dev, "HSW: %d, HFP: %d, HBP: %d, VSW: %d, VFP: %d, VBP: %d\n", + hsw, hfp, hbp, vsw, vfp, vbp); + + /* + * The pixel fetcher is 128 64-bit words deep = 1024 bytes. + * One overlay of 32bpp (4 cpp) assumed, fetch 160 pixels. + * 160 * 4 = 640 bytes. + */ + *fifo_wtrmrk_lvl = 640; /* Set up the main control, watermark level at 7 */ val = 7 << MCDE_CONF0_IFIFOCTRLWTRMRKLVL_SHIFT; - /* 24 bits DPI: connect LSB Ch B to D[0:7] */ - val |= 3 << MCDE_CONF0_OUTMUX0_SHIFT; - /* TV out: connect LSB Ch B to D[8:15] */ - val |= 3 << MCDE_CONF0_OUTMUX1_SHIFT; + + /* + * This sets up the internal silicon muxing of the DPI + * lines. This is how the silicon connects out to the + * external pins, then the pins need to be further + * configured into "alternate functions" using pin control + * to actually get the signals out. + * + * FIXME: this is hardcoded to the only setting found in + * the wild. If we need to use different settings for + * different DPI displays, make this parameterizable from + * the device tree. + */ + /* 24 bits DPI: connect Ch A LSB to D[0:7] */ + val |= 0 << MCDE_CONF0_OUTMUX0_SHIFT; + /* 24 bits DPI: connect Ch A MID to D[8:15] */ + val |= 1 << MCDE_CONF0_OUTMUX1_SHIFT; /* Don't care about this muxing */ val |= 0 << MCDE_CONF0_OUTMUX2_SHIFT; - /* 24 bits DPI: connect MID Ch B to D[24:31] */ - val |= 4 << MCDE_CONF0_OUTMUX3_SHIFT; - /* 5: 24 bits DPI: connect MSB Ch B to D[32:39] */ - val |= 5 << MCDE_CONF0_OUTMUX4_SHIFT; - /* Syncmux bits zero: DPI channel A and B on output pins A and B resp */ + /* Don't care about this muxing */ + val |= 0 << MCDE_CONF0_OUTMUX3_SHIFT; + /* 24 bits DPI: connect Ch A MSB to D[32:39] */ + val |= 2 << MCDE_CONF0_OUTMUX4_SHIFT; + /* Syncmux bits zero: DPI channel A */ writel(val, mcde->regs + MCDE_CONF0); - /* Clear any pending interrupts */ - mcde_display_disable_irqs(mcde); - writel(0, mcde->regs + MCDE_IMSCERR); - writel(0xFFFFFFFF, mcde->regs + MCDE_RISERR); + /* This hammers us into LCD mode */ + writel(0, mcde->regs + MCDE_TVCRA); + + /* Front porch and sync width */ + val = (vsw << MCDE_TVBL1_BEL1_SHIFT); + val |= (vfp << MCDE_TVBL1_BSL1_SHIFT); + writel(val, mcde->regs + MCDE_TVBL1A); + /* The vendor driver sets the same value into TVBL2A */ + writel(val, mcde->regs + MCDE_TVBL2A); + + /* Vertical back porch */ + val = (vbp << MCDE_TVDVO_DVO1_SHIFT); + /* The vendor drivers sets the same value into TVDVOA */ + val |= (vbp << MCDE_TVDVO_DVO2_SHIFT); + writel(val, mcde->regs + MCDE_TVDVOA); + + /* Horizontal back porch, as 0 = 1 cycle we need to subtract 1 */ + writel((hbp - 1), mcde->regs + MCDE_TVTIM1A); + + /* Horizongal sync width and horizonal front porch, 0 = 1 cycle */ + val = ((hsw - 1) << MCDE_TVLBALW_LBW_SHIFT); + val |= ((hfp - 1) << MCDE_TVLBALW_ALW_SHIFT); + writel(val, mcde->regs + MCDE_TVLBALWA); + + /* Blank some TV registers we don't use */ + writel(0, mcde->regs + MCDE_TVISLA); + writel(0, mcde->regs + MCDE_TVBLUA); + + /* Set up sync inversion etc */ + val = 0; + if (mode->flags & DRM_MODE_FLAG_NHSYNC) + val |= MCDE_LCDTIM1B_IHS; + if (mode->flags & DRM_MODE_FLAG_NVSYNC) + val |= MCDE_LCDTIM1B_IVS; + if (connector->display_info.bus_flags & DRM_BUS_FLAG_DE_LOW) + val |= MCDE_LCDTIM1B_IOE; + if (connector->display_info.bus_flags & DRM_BUS_FLAG_PIXDATA_DRIVE_NEGEDGE) + val |= MCDE_LCDTIM1B_IPC; + writel(val, mcde->regs + MCDE_LCDTIM1A); +} - dev_info(drm->dev, "output in %s mode, format %dbpp\n", +static void mcde_setup_dsi(struct mcde *mcde, const struct drm_display_mode *mode, + int cpp, int *fifo_wtrmrk_lvl, int *dsi_formatter_frame, + int *dsi_pkt_size) +{ + u32 formatter_ppl = mode->hdisplay; /* pixels per line */ + u32 formatter_lpf = mode->vdisplay; /* lines per frame */ + int formatter_frame; + int formatter_cpp; + int fifo_wtrmrk; + u32 pkt_div; + int pkt_size; + u32 val; + + dev_info(mcde->dev, "output in %s mode, format %dbpp\n", (mcde->mdsi->mode_flags & MIPI_DSI_MODE_VIDEO) ? "VIDEO" : "CMD", mipi_dsi_pixel_format_to_bpp(mcde->mdsi->format)); formatter_cpp = mipi_dsi_pixel_format_to_bpp(mcde->mdsi->format) / 8; - dev_info(drm->dev, "overlay CPP %d bytes, DSI CPP %d bytes\n", - cpp, - formatter_cpp); + dev_info(mcde->dev, "Overlay CPP: %d bytes, DSI formatter CPP %d bytes\n", + cpp, formatter_cpp); + + /* Set up the main control, watermark level at 7 */ + val = 7 << MCDE_CONF0_IFIFOCTRLWTRMRKLVL_SHIFT; + + /* + * This is the internal silicon muxing of the DPI + * (parallell display) lines. Since we are not using + * this at all (we are using DSI) these are just + * dummy values from the vendor tree. + */ + val |= 3 << MCDE_CONF0_OUTMUX0_SHIFT; + val |= 3 << MCDE_CONF0_OUTMUX1_SHIFT; + val |= 0 << MCDE_CONF0_OUTMUX2_SHIFT; + val |= 4 << MCDE_CONF0_OUTMUX3_SHIFT; + val |= 5 << MCDE_CONF0_OUTMUX4_SHIFT; + writel(val, mcde->regs + MCDE_CONF0); /* Calculations from mcde_fmtr_dsi.c, fmtr_dsi_enable_video() */ @@ -948,9 +1124,9 @@ static void mcde_display_enable(struct drm_simple_display_pipe *pipe, /* The FIFO is 640 entries deep on this v3 hardware */ pkt_div = mcde_dsi_get_pkt_div(mode->hdisplay, 640); } - dev_dbg(drm->dev, "FIFO watermark after flooring: %d bytes\n", + dev_dbg(mcde->dev, "FIFO watermark after flooring: %d bytes\n", fifo_wtrmrk); - dev_dbg(drm->dev, "Packet divisor: %d bytes\n", pkt_div); + dev_dbg(mcde->dev, "Packet divisor: %d bytes\n", pkt_div); /* NOTE: pkt_div is 1 for video mode */ pkt_size = (formatter_ppl * formatter_cpp) / pkt_div; @@ -958,16 +1134,64 @@ static void mcde_display_enable(struct drm_simple_display_pipe *pipe, if (!(mcde->mdsi->mode_flags & MIPI_DSI_MODE_VIDEO)) pkt_size++; - dev_dbg(drm->dev, "DSI packet size: %d * %d bytes per line\n", + dev_dbg(mcde->dev, "DSI packet size: %d * %d bytes per line\n", pkt_size, pkt_div); - dev_dbg(drm->dev, "Overlay frame size: %u bytes\n", + dev_dbg(mcde->dev, "Overlay frame size: %u bytes\n", mode->hdisplay * mode->vdisplay * cpp); - mcde->stride = mode->hdisplay * cpp; - dev_dbg(drm->dev, "Overlay line stride: %u bytes\n", - mcde->stride); /* NOTE: pkt_div is 1 for video mode */ formatter_frame = pkt_size * pkt_div * formatter_lpf; - dev_dbg(drm->dev, "Formatter frame size: %u bytes\n", formatter_frame); + dev_dbg(mcde->dev, "Formatter frame size: %u bytes\n", formatter_frame); + + *fifo_wtrmrk_lvl = fifo_wtrmrk; + *dsi_pkt_size = pkt_size; + *dsi_formatter_frame = formatter_frame; +} + +static void mcde_display_enable(struct drm_simple_display_pipe *pipe, + struct drm_crtc_state *cstate, + struct drm_plane_state *plane_state) +{ + struct drm_crtc *crtc = &pipe->crtc; + struct drm_plane *plane = &pipe->plane; + struct drm_device *drm = crtc->dev; + struct mcde *mcde = to_mcde(drm); + const struct drm_display_mode *mode = &cstate->mode; + struct drm_framebuffer *fb = plane->state->fb; + u32 format = fb->format->format; + int dsi_pkt_size; + int fifo_wtrmrk; + int cpp = fb->format->cpp[0]; + struct drm_format_name_buf tmp; + u32 dsi_formatter_frame; + u32 val; + int ret; + + /* This powers up the entire MCDE block and the DSI hardware */ + ret = regulator_enable(mcde->epod); + if (ret) { + dev_err(drm->dev, "can't re-enable EPOD regulator\n"); + return; + } + + dev_info(drm->dev, "enable MCDE, %d x %d format %s\n", + mode->hdisplay, mode->vdisplay, + drm_get_format_name(format, &tmp)); + + + /* Clear any pending interrupts */ + mcde_display_disable_irqs(mcde); + writel(0, mcde->regs + MCDE_IMSCERR); + writel(0xFFFFFFFF, mcde->regs + MCDE_RISERR); + + if (mcde->dpi_output) + mcde_setup_dpi(mcde, mode, &fifo_wtrmrk); + else + mcde_setup_dsi(mcde, mode, cpp, &fifo_wtrmrk, + &dsi_formatter_frame, &dsi_pkt_size); + + mcde->stride = mode->hdisplay * cpp; + dev_dbg(drm->dev, "Overlay line stride: %u bytes\n", + mcde->stride); /* Drain the FIFO A + channel 0 pipe so we have a clean slate */ mcde_drain_pipe(mcde, MCDE_FIFO_A, MCDE_CHANNEL_0); @@ -995,29 +1219,47 @@ static void mcde_display_enable(struct drm_simple_display_pipe *pipe, */ mcde_configure_channel(mcde, MCDE_CHANNEL_0, MCDE_FIFO_A, mode); - /* Configure FIFO A to use DSI formatter 0 */ - mcde_configure_fifo(mcde, MCDE_FIFO_A, MCDE_DSI_FORMATTER_0, - fifo_wtrmrk); + if (mcde->dpi_output) { + unsigned long lcd_freq; + + /* Configure FIFO A to use DPI formatter 0 */ + mcde_configure_fifo(mcde, MCDE_FIFO_A, MCDE_DPI_FORMATTER_0, + fifo_wtrmrk); + + /* Set up and enable the LCD clock */ + lcd_freq = clk_round_rate(mcde->fifoa_clk, mode->clock * 1000); + ret = clk_set_rate(mcde->fifoa_clk, lcd_freq); + if (ret) + dev_err(mcde->dev, "failed to set LCD clock rate %lu Hz\n", + lcd_freq); + ret = clk_prepare_enable(mcde->fifoa_clk); + if (ret) { + dev_err(mcde->dev, "failed to enable FIFO A DPI clock\n"); + return; + } + dev_info(mcde->dev, "LCD FIFO A clk rate %lu Hz\n", + clk_get_rate(mcde->fifoa_clk)); + } else { + /* Configure FIFO A to use DSI formatter 0 */ + mcde_configure_fifo(mcde, MCDE_FIFO_A, MCDE_DSI_FORMATTER_0, + fifo_wtrmrk); - /* - * This brings up the DSI bridge which is tightly connected - * to the MCDE DSI formatter. - * - * FIXME: if we want to use another formatter, such as DPI, - * we need to be more elaborate here and select the appropriate - * bridge. - */ - mcde_dsi_enable(mcde->bridge); + /* + * This brings up the DSI bridge which is tightly connected + * to the MCDE DSI formatter. + */ + mcde_dsi_enable(mcde->bridge); - /* Configure the DSI formatter 0 for the DSI panel output */ - mcde_configure_dsi_formatter(mcde, MCDE_DSI_FORMATTER_0, - formatter_frame, pkt_size); + /* Configure the DSI formatter 0 for the DSI panel output */ + mcde_configure_dsi_formatter(mcde, MCDE_DSI_FORMATTER_0, + dsi_formatter_frame, dsi_pkt_size); + } switch (mcde->flow_mode) { case MCDE_COMMAND_TE_FLOW: case MCDE_COMMAND_BTA_TE_FLOW: case MCDE_VIDEO_TE_FLOW: - /* We are using TE in some comination */ + /* We are using TE in some combination */ if (mode->flags & DRM_MODE_FLAG_NVSYNC) val = MCDE_VSCRC_VSPOL; else @@ -1069,8 +1311,12 @@ static void mcde_display_disable(struct drm_simple_display_pipe *pipe) /* Disable FIFO A flow */ mcde_disable_fifo(mcde, MCDE_FIFO_A, true); - /* This disables the DSI bridge */ - mcde_dsi_disable(mcde->bridge); + if (mcde->dpi_output) { + clk_disable_unprepare(mcde->fifoa_clk); + } else { + /* This disables the DSI bridge */ + mcde_dsi_disable(mcde->bridge); + } event = crtc->state->event; if (event) { @@ -1261,6 +1507,10 @@ int mcde_display_init(struct drm_device *drm) DRM_FORMAT_YUV422, }; + ret = mcde_init_clock_divider(mcde); + if (ret) + return ret; + ret = drm_simple_display_pipe_init(drm, &mcde->pipe, &mcde_display_funcs, formats, ARRAY_SIZE(formats), diff --git a/drivers/gpu/drm/mcde/mcde_display_regs.h b/drivers/gpu/drm/mcde/mcde_display_regs.h index d3ac7ef5ff9a..2ad78c59d627 100644 --- a/drivers/gpu/drm/mcde/mcde_display_regs.h +++ b/drivers/gpu/drm/mcde/mcde_display_regs.h @@ -215,6 +215,80 @@ #define MCDE_OVLXCOMP_Z_SHIFT 27 #define MCDE_OVLXCOMP_Z_MASK 0x78000000 +/* DPI/TV configuration registers, channel A and B */ +#define MCDE_TVCRA 0x00000838 +#define MCDE_TVCRB 0x00000A38 +#define MCDE_TVCR_MOD_TV BIT(0) /* 0 = LCD mode */ +#define MCDE_TVCR_INTEREN BIT(1) +#define MCDE_TVCR_IFIELD BIT(2) +#define MCDE_TVCR_TVMODE_SDTV_656P (0 << 3) +#define MCDE_TVCR_TVMODE_SDTV_656P_LE (3 << 3) +#define MCDE_TVCR_TVMODE_SDTV_656P_BE (4 << 3) +#define MCDE_TVCR_SDTVMODE_Y0CBY1CR (0 << 6) +#define MCDE_TVCR_SDTVMODE_CBY0CRY1 (1 << 6) +#define MCDE_TVCR_AVRGEN BIT(8) +#define MCDE_TVCR_CKINV BIT(9) + +/* TV blanking control register 1, channel A and B */ +#define MCDE_TVBL1A 0x0000083C +#define MCDE_TVBL1B 0x00000A3C +#define MCDE_TVBL1_BEL1_SHIFT 0 /* VFP vertical front porch 11 bits */ +#define MCDE_TVBL1_BSL1_SHIFT 16 /* VSW vertical sync pulse width 11 bits */ + +/* Pixel processing TV start line, channel A and B */ +#define MCDE_TVISLA 0x00000840 +#define MCDE_TVISLB 0x00000A40 +#define MCDE_TVISL_FSL1_SHIFT 0 /* Field 1 identification start line 11 bits */ +#define MCDE_TVISL_FSL2_SHIFT 16 /* Field 2 identification start line 11 bits */ + +/* Pixel processing TV DVO offset */ +#define MCDE_TVDVOA 0x00000844 +#define MCDE_TVDVOB 0x00000A44 +#define MCDE_TVDVO_DVO1_SHIFT 0 /* VBP vertical back porch 0 = 0 */ +#define MCDE_TVDVO_DVO2_SHIFT 16 + +/* + * Pixel processing TV Timing 1 + * HBP horizontal back porch 11 bits horizontal offset + * 0 = 1 pixel HBP, 255 = 256 pixels, so actual value - 1 + */ +#define MCDE_TVTIM1A 0x0000084C +#define MCDE_TVTIM1B 0x00000A4C + +/* Pixel processing TV LBALW */ +/* 0 = 1 clock cycle, 255 = 256 clock cycles */ +#define MCDE_TVLBALWA 0x00000850 +#define MCDE_TVLBALWB 0x00000A50 +#define MCDE_TVLBALW_LBW_SHIFT 0 /* HSW horizonal sync width, line blanking width 11 bits */ +#define MCDE_TVLBALW_ALW_SHIFT 16 /* HFP horizontal front porch, active line width 11 bits */ + +/* TV blanking control register 1, channel A and B */ +#define MCDE_TVBL2A 0x00000854 +#define MCDE_TVBL2B 0x00000A54 +#define MCDE_TVBL2_BEL2_SHIFT 0 /* Field 2 blanking end line 11 bits */ +#define MCDE_TVBL2_BSL2_SHIFT 16 /* Field 2 blanking start line 11 bits */ + +/* Pixel processing TV background */ +#define MCDE_TVBLUA 0x00000858 +#define MCDE_TVBLUB 0x00000A58 +#define MCDE_TVBLU_TVBLU_SHIFT 0 /* 8 bits luminance */ +#define MCDE_TVBLU_TVBCB_SHIFT 8 /* 8 bits Cb chrominance */ +#define MCDE_TVBLU_TVBCR_SHIFT 16 /* 8 bits Cr chrominance */ + +/* Pixel processing LCD timing 1 */ +#define MCDE_LCDTIM1A 0x00000860 +#define MCDE_LCDTIM1B 0x00000A60 +/* inverted vertical sync pulse for HRTFT 0 = active low, 1 active high */ +#define MCDE_LCDTIM1B_IVP BIT(19) +/* inverted vertical sync, 0 = active high (the normal), 1 = active low */ +#define MCDE_LCDTIM1B_IVS BIT(20) +/* inverted horizontal sync, 0 = active high (the normal), 1 = active low */ +#define MCDE_LCDTIM1B_IHS BIT(21) +/* inverted panel clock 0 = rising edge data out, 1 = falling edge data out */ +#define MCDE_LCDTIM1B_IPC BIT(22) +/* invert output enable 0 = active high, 1 = active low */ +#define MCDE_LCDTIM1B_IOE BIT(23) + #define MCDE_CRC 0x00000C00 #define MCDE_CRC_C1EN BIT(2) #define MCDE_CRC_C2EN BIT(3) @@ -360,6 +434,7 @@ #define MCDE_CRB1 0x00000A04 #define MCDE_CRX1_PCD_SHIFT 0 #define MCDE_CRX1_PCD_MASK 0x000003FF +#define MCDE_CRX1_PCD_BITS 10 #define MCDE_CRX1_CLKSEL_SHIFT 10 #define MCDE_CRX1_CLKSEL_MASK 0x00001C00 #define MCDE_CRX1_CLKSEL_CLKPLL72 0 @@ -421,8 +496,20 @@ #define MCDE_ROTACONF 0x0000087C #define MCDE_ROTBCONF 0x00000A7C +/* Synchronization event configuration */ #define MCDE_SYNCHCONFA 0x00000880 #define MCDE_SYNCHCONFB 0x00000A80 +#define MCDE_SYNCHCONF_HWREQVEVENT_SHIFT 0 +#define MCDE_SYNCHCONF_HWREQVEVENT_VSYNC (0 << 0) +#define MCDE_SYNCHCONF_HWREQVEVENT_BACK_PORCH (1 << 0) +#define MCDE_SYNCHCONF_HWREQVEVENT_ACTIVE_VIDEO (2 << 0) +#define MCDE_SYNCHCONF_HWREQVEVENT_FRONT_PORCH (3 << 0) +#define MCDE_SYNCHCONF_HWREQVCNT_SHIFT 2 /* 14 bits */ +#define MCDE_SYNCHCONF_SWINTVEVENT_VSYNC (0 << 16) +#define MCDE_SYNCHCONF_SWINTVEVENT_BACK_PORCH (1 << 16) +#define MCDE_SYNCHCONF_SWINTVEVENT_ACTIVE_VIDEO (2 << 16) +#define MCDE_SYNCHCONF_SWINTVEVENT_FRONT_PORCH (3 << 16) +#define MCDE_SYNCHCONF_SWINTVCNT_SHIFT 18 /* 14 bits */ /* Channel A+B control registers */ #define MCDE_CTRLA 0x00000884 @@ -465,8 +552,8 @@ #define MCDE_DSICONF0_PACKING_MASK 0x00700000 #define MCDE_DSICONF0_PACKING_RGB565 0 #define MCDE_DSICONF0_PACKING_RGB666 1 -#define MCDE_DSICONF0_PACKING_RGB666_PACKED 2 -#define MCDE_DSICONF0_PACKING_RGB888 3 +#define MCDE_DSICONF0_PACKING_RGB888 2 +#define MCDE_DSICONF0_PACKING_BGR888 3 #define MCDE_DSICONF0_PACKING_HDTV 4 #define MCDE_DSIVID0FRAME 0x00000E04 diff --git a/drivers/gpu/drm/mcde/mcde_drm.h b/drivers/gpu/drm/mcde/mcde_drm.h index 8253e2f9993e..ecb70b4b737c 100644 --- a/drivers/gpu/drm/mcde/mcde_drm.h +++ b/drivers/gpu/drm/mcde/mcde_drm.h @@ -62,6 +62,8 @@ enum mcde_flow_mode { MCDE_VIDEO_TE_FLOW, /* Video mode with the formatter itself as sync source */ MCDE_VIDEO_FORMATTER_FLOW, + /* DPI video with the formatter itsels as sync source */ + MCDE_DPI_FORMATTER_FLOW, }; struct mcde { @@ -72,6 +74,7 @@ struct mcde { struct drm_connector *connector; struct drm_simple_display_pipe pipe; struct mipi_dsi_device *mdsi; + bool dpi_output; s16 stride; enum mcde_flow_mode flow_mode; unsigned int flow_active; @@ -82,6 +85,11 @@ struct mcde { struct clk *mcde_clk; struct clk *lcd_clk; struct clk *hdmi_clk; + /* Handles to the clock dividers for FIFO A and B */ + struct clk *fifoa_clk; + struct clk *fifob_clk; + /* Locks the MCDE FIFO control register A and B */ + spinlock_t fifo_crx1_lock; struct regulator *epod; struct regulator *vana; @@ -105,4 +113,6 @@ void mcde_display_irq(struct mcde *mcde); void mcde_display_disable_irqs(struct mcde *mcde); int mcde_display_init(struct drm_device *drm); +int mcde_init_clock_divider(struct mcde *mcde); + #endif /* _MCDE_DRM_H_ */ diff --git a/drivers/gpu/drm/mcde/mcde_drv.c b/drivers/gpu/drm/mcde/mcde_drv.c index 9d25181bd7e2..e60566a5739c 100644 --- a/drivers/gpu/drm/mcde/mcde_drv.c +++ b/drivers/gpu/drm/mcde/mcde_drv.c @@ -22,13 +22,13 @@ * The hardware has four display pipes, and the layout is a little * bit like this:: * - * Memory -> Overlay -> Channel -> FIFO -> 5 formatters -> DSI/DPI - * External 0..5 0..3 A,B, 3 x DSI bridge + * Memory -> Overlay -> Channel -> FIFO -> 8 formatters -> DSI/DPI + * External 0..5 0..3 A,B, 6 x DSI bridge * source 0..9 C0,C1 2 x DPI * * FIFOs A and B are for LCD and HDMI while FIFO CO/C1 are for * panels with embedded buffer. - * 3 of the formatters are for DSI. + * 6 of the formatters are for DSI, 3 pairs for VID/CMD respectively. * 2 of the formatters are for DPI. * * Behind the formatters are the DSI or DPI ports that route to @@ -130,9 +130,37 @@ static int mcde_modeset_init(struct drm_device *drm) struct mcde *mcde = to_mcde(drm); int ret; + /* + * If no other bridge was found, check if we have a DPI panel or + * any other bridge connected directly to the MCDE DPI output. + * If a DSI bridge is found, DSI will take precedence. + * + * TODO: more elaborate bridge selection if we have more than one + * thing attached to the system. + */ if (!mcde->bridge) { - dev_err(drm->dev, "no display output bridge yet\n"); - return -EPROBE_DEFER; + struct drm_panel *panel; + struct drm_bridge *bridge; + + ret = drm_of_find_panel_or_bridge(drm->dev->of_node, + 0, 0, &panel, &bridge); + if (ret) { + dev_err(drm->dev, + "Could not locate any output bridge or panel\n"); + return ret; + } + if (panel) { + bridge = drm_panel_bridge_add_typed(panel, + DRM_MODE_CONNECTOR_DPI); + if (IS_ERR(bridge)) { + dev_err(drm->dev, + "Could not connect panel bridge\n"); + return PTR_ERR(bridge); + } + } + mcde->dpi_output = true; + mcde->bridge = bridge; + mcde->flow_mode = MCDE_DPI_FORMATTER_FLOW; } mode_config = &drm->mode_config; @@ -156,13 +184,7 @@ static int mcde_modeset_init(struct drm_device *drm) return ret; } - /* - * Attach the DSI bridge - * - * TODO: when adding support for the DPI bridge or several DSI bridges, - * we selectively connect the bridge(s) here instead of this simple - * attachment. - */ + /* Attach the bridge. */ ret = drm_simple_display_pipe_attach_bridge(&mcde->pipe, mcde->bridge); if (ret) { |