summaryrefslogtreecommitdiff
path: root/drivers/ata/pata_octeon_cf.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/ata/pata_octeon_cf.c')
-rw-r--r--drivers/ata/pata_octeon_cf.c16
1 files changed, 8 insertions, 8 deletions
diff --git a/drivers/ata/pata_octeon_cf.c b/drivers/ata/pata_octeon_cf.c
index 35608a0cf552..4cbcdc5da038 100644
--- a/drivers/ata/pata_octeon_cf.c
+++ b/drivers/ata/pata_octeon_cf.c
@@ -67,7 +67,7 @@ module_param(enable_dma, int, 0444);
MODULE_PARM_DESC(enable_dma,
"Enable use of DMA on interfaces that support it (0=no dma [default], 1=use dma)");
-/**
+/*
* Convert nanosecond based time to setting used in the
* boot bus timing register, based on timing multiple
*/
@@ -114,7 +114,7 @@ static void octeon_cf_set_boot_reg_cfg(int cs, unsigned int multiplier)
cvmx_write_csr(CVMX_MIO_BOOT_REG_CFGX(cs), reg_cfg.u64);
}
-/**
+/*
* Called after libata determines the needed PIO mode. This
* function programs the Octeon bootbus regions to support the
* timing requirements of the PIO mode.
@@ -278,7 +278,7 @@ static void octeon_cf_set_dmamode(struct ata_port *ap, struct ata_device *dev)
cvmx_write_csr(cf_port->dma_base + DMA_TIM, dma_tim.u64);
}
-/**
+/*
* Handle an 8 bit I/O request.
*
* @qc: Queued command
@@ -317,7 +317,7 @@ static unsigned int octeon_cf_data_xfer8(struct ata_queued_cmd *qc,
return buflen;
}
-/**
+/*
* Handle a 16 bit I/O request.
*
* @qc: Queued command
@@ -372,7 +372,7 @@ static unsigned int octeon_cf_data_xfer16(struct ata_queued_cmd *qc,
return buflen;
}
-/**
+/*
* Read the taskfile for 16bit non-True IDE only.
*/
static void octeon_cf_tf_read16(struct ata_port *ap, struct ata_taskfile *tf)
@@ -453,7 +453,7 @@ static int octeon_cf_softreset16(struct ata_link *link, unsigned int *classes,
return 0;
}
-/**
+/*
* Load the taskfile for 16bit non-True IDE only. The device_addr is
* not loaded, we do this as part of octeon_cf_exec_command16.
*/
@@ -525,7 +525,7 @@ static void octeon_cf_dma_setup(struct ata_queued_cmd *qc)
ap->ops->sff_exec_command(ap, &qc->tf);
}
-/**
+/*
* Start a DMA transfer that was already setup
*
* @qc: Information about the DMA
@@ -580,7 +580,7 @@ static void octeon_cf_dma_start(struct ata_queued_cmd *qc)
cvmx_write_csr(cf_port->dma_base + DMA_CFG, mio_boot_dma_cfg.u64);
}
-/**
+/*
*
* LOCKING:
* spin_lock_irqsave(host lock)