summaryrefslogtreecommitdiff
path: root/drivers/ata/pata_ali.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/ata/pata_ali.c')
-rw-r--r--drivers/ata/pata_ali.c679
1 files changed, 679 insertions, 0 deletions
diff --git a/drivers/ata/pata_ali.c b/drivers/ata/pata_ali.c
new file mode 100644
index 000000000000..8448ee6e0eed
--- /dev/null
+++ b/drivers/ata/pata_ali.c
@@ -0,0 +1,679 @@
+/*
+ * pata_ali.c - ALI 15x3 PATA for new ATA layer
+ * (C) 2005 Red Hat Inc
+ * Alan Cox <alan@redhat.com>
+ *
+ * based in part upon
+ * linux/drivers/ide/pci/alim15x3.c Version 0.17 2003/01/02
+ *
+ * Copyright (C) 1998-2000 Michel Aubry, Maintainer
+ * Copyright (C) 1998-2000 Andrzej Krzysztofowicz, Maintainer
+ * Copyright (C) 1999-2000 CJ, cjtsai@ali.com.tw, Maintainer
+ *
+ * Copyright (C) 1998-2000 Andre Hedrick (andre@linux-ide.org)
+ * May be copied or modified under the terms of the GNU General Public License
+ * Copyright (C) 2002 Alan Cox <alan@redhat.com>
+ * ALi (now ULi M5228) support by Clear Zhang <Clear.Zhang@ali.com.tw>
+ *
+ * Documentation
+ * Chipset documentation available under NDA only
+ *
+ * TODO/CHECK
+ * Cannot have ATAPI on both master & slave for rev < c2 (???) but
+ * otherwise should do atapi DMA.
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/pci.h>
+#include <linux/init.h>
+#include <linux/blkdev.h>
+#include <linux/delay.h>
+#include <scsi/scsi_host.h>
+#include <linux/libata.h>
+#include <linux/dmi.h>
+
+#define DRV_NAME "pata_ali"
+#define DRV_VERSION "0.6.5"
+
+/*
+ * Cable special cases
+ */
+
+static struct dmi_system_id cable_dmi_table[] = {
+ {
+ .ident = "HP Pavilion N5430",
+ .matches = {
+ DMI_MATCH(DMI_BOARD_VENDOR, "Hewlett-Packard"),
+ DMI_MATCH(DMI_BOARD_NAME, "OmniBook N32N-736"),
+ },
+ },
+ { }
+};
+
+static int ali_cable_override(struct pci_dev *pdev)
+{
+ /* Fujitsu P2000 */
+ if (pdev->subsystem_vendor == 0x10CF && pdev->subsystem_device == 0x10AF)
+ return 1;
+ /* Systems by DMI */
+ if (dmi_check_system(cable_dmi_table))
+ return 1;
+ return 0;
+}
+
+/**
+ * ali_c2_cable_detect - cable detection
+ * @ap: ATA port
+ *
+ * Perform cable detection for C2 and later revisions
+ */
+
+static int ali_c2_cable_detect(struct ata_port *ap)
+{
+ struct pci_dev *pdev = to_pci_dev(ap->host->dev);
+ u8 ata66;
+
+ /* Certain laptops use short but suitable cables and don't
+ implement the detect logic */
+
+ if (ali_cable_override(pdev))
+ return ATA_CBL_PATA80;
+
+ /* Host view cable detect 0x4A bit 0 primary bit 1 secondary
+ Bit set for 40 pin */
+ pci_read_config_byte(pdev, 0x4A, &ata66);
+ if (ata66 & (1 << ap->port_no))
+ return ATA_CBL_PATA40;
+ else
+ return ATA_CBL_PATA80;
+}
+
+/**
+ * ali_early_error_handler - reset for eary chip
+ * @ap: ATA port
+ *
+ * Handle the reset callback for the later chips with cable detect
+ */
+
+static int ali_c2_pre_reset(struct ata_port *ap)
+{
+ ap->cbl = ali_c2_cable_detect(ap);
+ return ata_std_prereset(ap);
+}
+
+static void ali_c2_error_handler(struct ata_port *ap)
+{
+ ata_bmdma_drive_eh(ap, ali_c2_pre_reset,
+ ata_std_softreset, NULL,
+ ata_std_postreset);
+}
+
+/**
+ * ali_early_cable_detect - cable detection
+ * @ap: ATA port
+ *
+ * Perform cable detection for older chipsets. This turns out to be
+ * rather easy to implement
+ */
+
+static int ali_early_cable_detect(struct ata_port *ap)
+{
+ return ATA_CBL_PATA40;
+}
+
+/**
+ * ali_early_probe_init - reset for early chip
+ * @ap: ATA port
+ *
+ * Handle the reset callback for the early (pre cable detect) chips.
+ */
+
+static int ali_early_pre_reset(struct ata_port *ap)
+{
+ ap->cbl = ali_early_cable_detect(ap);
+ return ata_std_prereset(ap);
+}
+
+static void ali_early_error_handler(struct ata_port *ap)
+{
+ return ata_bmdma_drive_eh(ap, ali_early_pre_reset,
+ ata_std_softreset, NULL,
+ ata_std_postreset);
+}
+
+/**
+ * ali_20_filter - filter for earlier ALI DMA
+ * @ap: ALi ATA port
+ * @adev: attached device
+ *
+ * Ensure that we do not do DMA on CD devices. We may be able to
+ * fix that later on. Also ensure we do not do UDMA on WDC drives
+ */
+
+static unsigned long ali_20_filter(const struct ata_port *ap, struct ata_device *adev, unsigned long mask)
+{
+ char model_num[40];
+ /* No DMA on anything but a disk for now */
+ if (adev->class != ATA_DEV_ATA)
+ mask &= ~(ATA_MASK_MWDMA | ATA_MASK_UDMA);
+ ata_id_string(adev->id, model_num, ATA_ID_PROD_OFS, sizeof(model_num));
+ if (strstr(model_num, "WDC"))
+ return mask &= ~ATA_MASK_UDMA;
+ return ata_pci_default_filter(ap, adev, mask);
+}
+
+/**
+ * ali_fifo_control - FIFO manager
+ * @ap: ALi channel to control
+ * @adev: device for FIFO control
+ * @on: 0 for off 1 for on
+ *
+ * Enable or disable the FIFO on a given device. Because of the way the
+ * ALi FIFO works it provides a boost on ATA disk but can be confused by
+ * ATAPI and we must therefore manage it.
+ */
+
+static void ali_fifo_control(struct ata_port *ap, struct ata_device *adev, int on)
+{
+ struct pci_dev *pdev = to_pci_dev(ap->host->dev);
+ int pio_fifo = 0x54 + ap->port_no;
+ u8 fifo;
+ int shift = 4 * adev->devno;
+
+ /* ATA - FIFO on set nibble to 0x05, ATAPI - FIFO off, set nibble to
+ 0x00. Not all the docs agree but the behaviour we now use is the
+ one stated in the BIOS Programming Guide */
+
+ pci_read_config_byte(pdev, pio_fifo, &fifo);
+ fifo &= ~(0x0F << shift);
+ if (on)
+ fifo |= (on << shift);
+ pci_write_config_byte(pdev, pio_fifo, fifo);
+}
+
+/**
+ * ali_program_modes - load mode registers
+ * @ap: ALi channel to load
+ * @adev: Device the timing is for
+ * @cmd: Command timing
+ * @data: Data timing
+ * @ultra: UDMA timing or zero for off
+ *
+ * Loads the timing registers for cmd/data and disable UDMA if
+ * ultra is zero. If ultra is set then load and enable the UDMA
+ * timing but do not touch the command/data timing.
+ */
+
+static void ali_program_modes(struct ata_port *ap, struct ata_device *adev, struct ata_timing *t, u8 ultra)
+{
+ struct pci_dev *pdev = to_pci_dev(ap->host->dev);
+ int cas = 0x58 + 4 * ap->port_no; /* Command timing */
+ int cbt = 0x59 + 4 * ap->port_no; /* Command timing */
+ int drwt = 0x5A + 4 * ap->port_no + adev->devno; /* R/W timing */
+ int udmat = 0x56 + ap->port_no; /* UDMA timing */
+ int shift = 4 * adev->devno;
+ u8 udma;
+
+ if (t != NULL) {
+ t->setup = FIT(t->setup, 1, 8) & 7;
+ t->act8b = FIT(t->act8b, 1, 8) & 7;
+ t->rec8b = FIT(t->rec8b, 1, 16) & 15;
+ t->active = FIT(t->active, 1, 8) & 7;
+ t->recover = FIT(t->recover, 1, 16) & 15;
+
+ pci_write_config_byte(pdev, cas, t->setup);
+ pci_write_config_byte(pdev, cbt, (t->act8b << 4) | t->rec8b);
+ pci_write_config_byte(pdev, drwt, (t->active << 4) | t->recover);
+ }
+
+ /* Set up the UDMA enable */
+ pci_read_config_byte(pdev, udmat, &udma);
+ udma &= ~(0x0F << shift);
+ udma |= ultra << shift;
+ pci_write_config_byte(pdev, udmat, udma);
+}
+
+/**
+ * ali_set_piomode - set initial PIO mode data
+ * @ap: ATA interface
+ * @adev: ATA device
+ *
+ * Program the ALi registers for PIO mode. FIXME: add timings for
+ * PIO5.
+ */
+
+static void ali_set_piomode(struct ata_port *ap, struct ata_device *adev)
+{
+ struct ata_device *pair = ata_dev_pair(adev);
+ struct ata_timing t;
+ unsigned long T = 1000000000 / 33333; /* PCI clock based */
+
+ ata_timing_compute(adev, adev->pio_mode, &t, T, 1);
+ if (pair) {
+ struct ata_timing p;
+ ata_timing_compute(pair, pair->pio_mode, &p, T, 1);
+ ata_timing_merge(&p, &t, &t, ATA_TIMING_SETUP|ATA_TIMING_8BIT);
+ if (pair->dma_mode) {
+ ata_timing_compute(pair, pair->dma_mode, &p, T, 1);
+ ata_timing_merge(&p, &t, &t, ATA_TIMING_SETUP|ATA_TIMING_8BIT);
+ }
+ }
+
+ /* PIO FIFO is only permitted on ATA disk */
+ if (adev->class != ATA_DEV_ATA)
+ ali_fifo_control(ap, adev, 0x00);
+ ali_program_modes(ap, adev, &t, 0);
+ if (adev->class == ATA_DEV_ATA)
+ ali_fifo_control(ap, adev, 0x05);
+
+}
+
+/**
+ * ali_set_dmamode - set initial DMA mode data
+ * @ap: ATA interface
+ * @adev: ATA device
+ *
+ * FIXME: MWDMA timings
+ */
+
+static void ali_set_dmamode(struct ata_port *ap, struct ata_device *adev)
+{
+ static u8 udma_timing[7] = { 0xC, 0xB, 0xA, 0x9, 0x8, 0xF, 0xD };
+ struct ata_device *pair = ata_dev_pair(adev);
+ struct ata_timing t;
+ unsigned long T = 1000000000 / 33333; /* PCI clock based */
+ struct pci_dev *pdev = to_pci_dev(ap->host->dev);
+
+
+ if (adev->class == ATA_DEV_ATA)
+ ali_fifo_control(ap, adev, 0x08);
+
+ if (adev->dma_mode >= XFER_UDMA_0) {
+ ali_program_modes(ap, adev, NULL, udma_timing[adev->dma_mode - XFER_UDMA_0]);
+ if (adev->dma_mode >= XFER_UDMA_3) {
+ u8 reg4b;
+ pci_read_config_byte(pdev, 0x4B, &reg4b);
+ reg4b |= 1;
+ pci_write_config_byte(pdev, 0x4B, reg4b);
+ }
+ } else {
+ ata_timing_compute(adev, adev->dma_mode, &t, T, 1);
+ if (pair) {
+ struct ata_timing p;
+ ata_timing_compute(pair, pair->pio_mode, &p, T, 1);
+ ata_timing_merge(&p, &t, &t, ATA_TIMING_SETUP|ATA_TIMING_8BIT);
+ if (pair->dma_mode) {
+ ata_timing_compute(pair, pair->dma_mode, &p, T, 1);
+ ata_timing_merge(&p, &t, &t, ATA_TIMING_SETUP|ATA_TIMING_8BIT);
+ }
+ }
+ ali_program_modes(ap, adev, &t, 0);
+ }
+}
+
+/**
+ * ali_lock_sectors - Keep older devices to 255 sector mode
+ * @ap: ATA port
+ * @adev: Device
+ *
+ * Called during the bus probe for each device that is found. We use
+ * this call to lock the sector count of the device to 255 or less on
+ * older ALi controllers. If we didn't do this then large I/O's would
+ * require LBA48 commands which the older ALi requires are issued by
+ * slower PIO methods
+ */
+
+static void ali_lock_sectors(struct ata_port *ap, struct ata_device *adev)
+{
+ adev->max_sectors = 255;
+}
+
+static struct scsi_host_template ali_sht = {
+ .module = THIS_MODULE,
+ .name = DRV_NAME,
+ .ioctl = ata_scsi_ioctl,
+ .queuecommand = ata_scsi_queuecmd,
+ .can_queue = ATA_DEF_QUEUE,
+ .this_id = ATA_SHT_THIS_ID,
+ .sg_tablesize = LIBATA_MAX_PRD,
+ /* Keep LBA28 counts so large I/O's don't turn LBA48 and PIO
+ with older controllers. Not locked so will grow on C5 or later */
+ .max_sectors = 255,
+ .cmd_per_lun = ATA_SHT_CMD_PER_LUN,
+ .emulated = ATA_SHT_EMULATED,
+ .use_clustering = ATA_SHT_USE_CLUSTERING,
+ .proc_name = DRV_NAME,
+ .dma_boundary = ATA_DMA_BOUNDARY,
+ .slave_configure = ata_scsi_slave_config,
+ .bios_param = ata_std_bios_param,
+};
+
+/*
+ * Port operations for PIO only ALi
+ */
+
+static struct ata_port_operations ali_early_port_ops = {
+ .port_disable = ata_port_disable,
+ .set_piomode = ali_set_piomode,
+ .tf_load = ata_tf_load,
+ .tf_read = ata_tf_read,
+ .check_status = ata_check_status,
+ .exec_command = ata_exec_command,
+ .dev_select = ata_std_dev_select,
+
+ .freeze = ata_bmdma_freeze,
+ .thaw = ata_bmdma_thaw,
+ .error_handler = ali_early_error_handler,
+ .post_internal_cmd = ata_bmdma_post_internal_cmd,
+
+ .qc_prep = ata_qc_prep,
+ .qc_issue = ata_qc_issue_prot,
+ .eng_timeout = ata_eng_timeout,
+ .data_xfer = ata_pio_data_xfer,
+
+ .irq_handler = ata_interrupt,
+ .irq_clear = ata_bmdma_irq_clear,
+
+ .port_start = ata_port_start,
+ .port_stop = ata_port_stop,
+ .host_stop = ata_host_stop
+};
+
+/*
+ * Port operations for DMA capable ALi without cable
+ * detect
+ */
+static struct ata_port_operations ali_20_port_ops = {
+ .port_disable = ata_port_disable,
+
+ .set_piomode = ali_set_piomode,
+ .set_dmamode = ali_set_dmamode,
+ .mode_filter = ali_20_filter,
+
+ .tf_load = ata_tf_load,
+ .tf_read = ata_tf_read,
+ .check_status = ata_check_status,
+ .exec_command = ata_exec_command,
+ .dev_select = ata_std_dev_select,
+ .dev_config = ali_lock_sectors,
+
+ .freeze = ata_bmdma_freeze,
+ .thaw = ata_bmdma_thaw,
+ .error_handler = ali_early_error_handler,
+ .post_internal_cmd = ata_bmdma_post_internal_cmd,
+
+ .bmdma_setup = ata_bmdma_setup,
+ .bmdma_start = ata_bmdma_start,
+ .bmdma_stop = ata_bmdma_stop,
+ .bmdma_status = ata_bmdma_status,
+
+ .qc_prep = ata_qc_prep,
+ .qc_issue = ata_qc_issue_prot,
+ .eng_timeout = ata_eng_timeout,
+ .data_xfer = ata_pio_data_xfer,
+
+ .irq_handler = ata_interrupt,
+ .irq_clear = ata_bmdma_irq_clear,
+
+ .port_start = ata_port_start,
+ .port_stop = ata_port_stop,
+ .host_stop = ata_host_stop
+};
+
+/*
+ * Port operations for DMA capable ALi with cable detect
+ */
+static struct ata_port_operations ali_c2_port_ops = {
+ .port_disable = ata_port_disable,
+ .set_piomode = ali_set_piomode,
+ .set_dmamode = ali_set_dmamode,
+ .mode_filter = ata_pci_default_filter,
+ .tf_load = ata_tf_load,
+ .tf_read = ata_tf_read,
+ .check_status = ata_check_status,
+ .exec_command = ata_exec_command,
+ .dev_select = ata_std_dev_select,
+ .dev_config = ali_lock_sectors,
+
+ .freeze = ata_bmdma_freeze,
+ .thaw = ata_bmdma_thaw,
+ .error_handler = ali_c2_error_handler,
+ .post_internal_cmd = ata_bmdma_post_internal_cmd,
+
+ .bmdma_setup = ata_bmdma_setup,
+ .bmdma_start = ata_bmdma_start,
+ .bmdma_stop = ata_bmdma_stop,
+ .bmdma_status = ata_bmdma_status,
+
+ .qc_prep = ata_qc_prep,
+ .qc_issue = ata_qc_issue_prot,
+ .eng_timeout = ata_eng_timeout,
+ .data_xfer = ata_pio_data_xfer,
+
+ .irq_handler = ata_interrupt,
+ .irq_clear = ata_bmdma_irq_clear,
+
+ .port_start = ata_port_start,
+ .port_stop = ata_port_stop,
+ .host_stop = ata_host_stop
+};
+
+/*
+ * Port operations for DMA capable ALi with cable detect and LBA48
+ */
+static struct ata_port_operations ali_c5_port_ops = {
+ .port_disable = ata_port_disable,
+ .set_piomode = ali_set_piomode,
+ .set_dmamode = ali_set_dmamode,
+ .mode_filter = ata_pci_default_filter,
+ .tf_load = ata_tf_load,
+ .tf_read = ata_tf_read,
+ .check_status = ata_check_status,
+ .exec_command = ata_exec_command,
+ .dev_select = ata_std_dev_select,
+
+ .freeze = ata_bmdma_freeze,
+ .thaw = ata_bmdma_thaw,
+ .error_handler = ali_c2_error_handler,
+ .post_internal_cmd = ata_bmdma_post_internal_cmd,
+
+ .bmdma_setup = ata_bmdma_setup,
+ .bmdma_start = ata_bmdma_start,
+ .bmdma_stop = ata_bmdma_stop,
+ .bmdma_status = ata_bmdma_status,
+
+ .qc_prep = ata_qc_prep,
+ .qc_issue = ata_qc_issue_prot,
+ .eng_timeout = ata_eng_timeout,
+ .data_xfer = ata_pio_data_xfer,
+
+ .irq_handler = ata_interrupt,
+ .irq_clear = ata_bmdma_irq_clear,
+
+ .port_start = ata_port_start,
+ .port_stop = ata_port_stop,
+ .host_stop = ata_host_stop
+};
+
+/**
+ * ali_init_one - discovery callback
+ * @pdev: PCI device ID
+ * @id: PCI table info
+ *
+ * An ALi IDE interface has been discovered. Figure out what revision
+ * and perform configuration work before handing it to the ATA layer
+ */
+
+static int ali_init_one(struct pci_dev *pdev, const struct pci_device_id *id)
+{
+ static struct ata_port_info info_early = {
+ .sht = &ali_sht,
+ .flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_SRST,
+ .pio_mask = 0x1f,
+ .port_ops = &ali_early_port_ops
+ };
+ /* Revision 0x20 added DMA */
+ static struct ata_port_info info_20 = {
+ .sht = &ali_sht,
+ .flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_SRST | ATA_FLAG_PIO_LBA48,
+ .pio_mask = 0x1f,
+ .mwdma_mask = 0x07,
+ .port_ops = &ali_20_port_ops
+ };
+ /* Revision 0x20 with support logic added UDMA */
+ static struct ata_port_info info_20_udma = {
+ .sht = &ali_sht,
+ .flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_SRST | ATA_FLAG_PIO_LBA48,
+ .pio_mask = 0x1f,
+ .mwdma_mask = 0x07,
+ .udma_mask = 0x07, /* UDMA33 */
+ .port_ops = &ali_20_port_ops
+ };
+ /* Revision 0xC2 adds UDMA66 */
+ static struct ata_port_info info_c2 = {
+ .sht = &ali_sht,
+ .flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_SRST | ATA_FLAG_PIO_LBA48,
+ .pio_mask = 0x1f,
+ .mwdma_mask = 0x07,
+ .udma_mask = 0x1f,
+ .port_ops = &ali_c2_port_ops
+ };
+ /* Revision 0xC3 is UDMA100 */
+ static struct ata_port_info info_c3 = {
+ .sht = &ali_sht,
+ .flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_SRST | ATA_FLAG_PIO_LBA48,
+ .pio_mask = 0x1f,
+ .mwdma_mask = 0x07,
+ .udma_mask = 0x3f,
+ .port_ops = &ali_c2_port_ops
+ };
+ /* Revision 0xC4 is UDMA133 */
+ static struct ata_port_info info_c4 = {
+ .sht = &ali_sht,
+ .flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_SRST | ATA_FLAG_PIO_LBA48,
+ .pio_mask = 0x1f,
+ .mwdma_mask = 0x07,
+ .udma_mask = 0x7f,
+ .port_ops = &ali_c2_port_ops
+ };
+ /* Revision 0xC5 is UDMA133 with LBA48 DMA */
+ static struct ata_port_info info_c5 = {
+ .sht = &ali_sht,
+ .flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_SRST,
+ .pio_mask = 0x1f,
+ .mwdma_mask = 0x07,
+ .udma_mask = 0x7f,
+ .port_ops = &ali_c5_port_ops
+ };
+
+ static struct ata_port_info *port_info[2];
+ u8 rev, tmp;
+ struct pci_dev *north, *isa_bridge;
+
+ pci_read_config_byte(pdev, PCI_REVISION_ID, &rev);
+
+ /*
+ * The chipset revision selects the driver operations and
+ * mode data.
+ */
+
+ if (rev < 0x20) {
+ port_info[0] = port_info[1] = &info_early;
+ } else if (rev < 0xC2) {
+ /* 1543-E/F, 1543C-C, 1543C-D, 1543C-E */
+ pci_read_config_byte(pdev, 0x4B, &tmp);
+ /* Clear CD-ROM DMA write bit */
+ tmp &= 0x7F;
+ pci_write_config_byte(pdev, 0x4B, tmp);
+ port_info[0] = port_info[1] = &info_20;
+ } else if (rev == 0xC2) {
+ port_info[0] = port_info[1] = &info_c2;
+ } else if (rev == 0xC3) {
+ port_info[0] = port_info[1] = &info_c3;
+ } else if (rev == 0xC4) {
+ port_info[0] = port_info[1] = &info_c4;
+ } else
+ port_info[0] = port_info[1] = &info_c5;
+
+ if (rev >= 0xC2) {
+ /* Enable cable detection logic */
+ pci_read_config_byte(pdev, 0x4B, &tmp);
+ pci_write_config_byte(pdev, 0x4B, tmp | 0x08);
+ }
+
+ north = pci_get_slot(pdev->bus, PCI_DEVFN(0,0));
+ isa_bridge = pci_get_device(PCI_VENDOR_ID_AL, PCI_DEVICE_ID_AL_M1533, NULL);
+
+ if (north && north->vendor == PCI_VENDOR_ID_AL) {
+ /* Configure the ALi bridge logic. For non ALi rely on BIOS.
+ Set the south bridge enable bit */
+ pci_read_config_byte(isa_bridge, 0x79, &tmp);
+ if (rev == 0xC2)
+ pci_write_config_byte(isa_bridge, 0x79, tmp | 0x04);
+ else if (rev > 0xC2)
+ pci_write_config_byte(isa_bridge, 0x79, tmp | 0x02);
+ }
+
+ if (rev >= 0x20) {
+ if (rev < 0xC2) {
+ /* Are we paired with a UDMA capable chip */
+ pci_read_config_byte(isa_bridge, 0x5E, &tmp);
+ if ((tmp & 0x1E) == 0x12)
+ port_info[0] = port_info[1] = &info_20_udma;
+ }
+ /*
+ * CD_ROM DMA on (0x53 bit 0). Enable this even if we want
+ * to use PIO. 0x53 bit 1 (rev 20 only) - enable FIFO control
+ * via 0x54/55.
+ */
+ pci_read_config_byte(pdev, 0x53, &tmp);
+ if (rev <= 0x20)
+ tmp &= ~0x02;
+ if (rev == 0xc7)
+ tmp |= 0x03;
+ else
+ tmp |= 0x01; /* CD_ROM enable for DMA */
+ pci_write_config_byte(pdev, 0x53, tmp);
+ }
+
+ pci_dev_put(isa_bridge);
+ pci_dev_put(north);
+
+ ata_pci_clear_simplex(pdev);
+ return ata_pci_init_one(pdev, port_info, 2);
+}
+
+static struct pci_device_id ali[] = {
+ { PCI_DEVICE(PCI_VENDOR_ID_AL, PCI_DEVICE_ID_AL_M5228), },
+ { PCI_DEVICE(PCI_VENDOR_ID_AL, PCI_DEVICE_ID_AL_M5229), },
+ { 0, },
+};
+
+static struct pci_driver ali_pci_driver = {
+ .name = DRV_NAME,
+ .id_table = ali,
+ .probe = ali_init_one,
+ .remove = ata_pci_remove_one
+};
+
+static int __init ali_init(void)
+{
+ return pci_register_driver(&ali_pci_driver);
+}
+
+
+static void __exit ali_exit(void)
+{
+ pci_unregister_driver(&ali_pci_driver);
+}
+
+
+MODULE_AUTHOR("Alan Cox");
+MODULE_DESCRIPTION("low-level driver for ALi PATA");
+MODULE_LICENSE("GPL");
+MODULE_DEVICE_TABLE(pci, ali);
+MODULE_VERSION(DRV_VERSION);
+
+module_init(ali_init);
+module_exit(ali_exit);
generated by cgit v1.2.3 (git 2.39.0) at 2024-11-28 04:49:45 +0300