diff options
Diffstat (limited to 'arch')
213 files changed, 1581 insertions, 1449 deletions
diff --git a/arch/arm/mach-omap1/board-ams-delta.c b/arch/arm/mach-omap1/board-ams-delta.c index 8ad5cc3e83e3..7fc11c34b696 100644 --- a/arch/arm/mach-omap1/board-ams-delta.c +++ b/arch/arm/mach-omap1/board-ams-delta.c @@ -25,13 +25,13 @@ #include <asm/mach/arch.h> #include <asm/mach/map.h> -#include <mach/board-ams-delta.h> +#include <plat/board-ams-delta.h> #include <mach/gpio.h> -#include <mach/keypad.h> -#include <mach/mux.h> -#include <mach/usb.h> -#include <mach/board.h> -#include <mach/common.h> +#include <plat/keypad.h> +#include <plat/mux.h> +#include <plat/usb.h> +#include <plat/board.h> +#include <plat/common.h> static u8 ams_delta_latch1_reg; static u16 ams_delta_latch2_reg; diff --git a/arch/arm/mach-omap1/board-fsample.c b/arch/arm/mach-omap1/board-fsample.c index a7ead1b93226..f4b72c1654f5 100644 --- a/arch/arm/mach-omap1/board-fsample.c +++ b/arch/arm/mach-omap1/board-fsample.c @@ -26,14 +26,14 @@ #include <asm/mach/flash.h> #include <asm/mach/map.h> -#include <mach/tc.h> +#include <plat/tc.h> #include <mach/gpio.h> -#include <mach/mux.h> -#include <mach/fpga.h> -#include <mach/nand.h> -#include <mach/keypad.h> -#include <mach/common.h> -#include <mach/board.h> +#include <plat/mux.h> +#include <plat/fpga.h> +#include <plat/nand.h> +#include <plat/keypad.h> +#include <plat/common.h> +#include <plat/board.h> /* fsample is pretty close to p2-sample */ @@ -107,7 +107,7 @@ static struct resource smc91x_resources[] = { .flags = IORESOURCE_MEM, }, [1] = { - .start = INT_730_MPU_EXT_NIRQ, + .start = INT_7XX_MPU_EXT_NIRQ, .end = 0, .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE, }, @@ -196,8 +196,8 @@ static struct platform_device smc91x_device = { static struct resource kp_resources[] = { [0] = { - .start = INT_730_MPUIO_KEYPAD, - .end = INT_730_MPUIO_KEYPAD, + .start = INT_7XX_MPUIO_KEYPAD, + .end = INT_7XX_MPUIO_KEYPAD, .flags = IORESOURCE_IRQ, }, }; @@ -309,7 +309,7 @@ static void __init omap_fsample_map_io(void) /* * Hold GSM Reset until needed */ - omap_writew(omap_readw(OMAP730_DSP_M_CTL) & ~1, OMAP730_DSP_M_CTL); + omap_writew(omap_readw(OMAP7XX_DSP_M_CTL) & ~1, OMAP7XX_DSP_M_CTL); /* * UARTs -> done automagically by 8250 driver @@ -320,21 +320,21 @@ static void __init omap_fsample_map_io(void) */ /* Flash: CS0 timings setup */ - omap_writel(0x0000fff3, OMAP730_FLASH_CFG_0); - omap_writel(0x00000088, OMAP730_FLASH_ACFG_0); + omap_writel(0x0000fff3, OMAP7XX_FLASH_CFG_0); + omap_writel(0x00000088, OMAP7XX_FLASH_ACFG_0); /* * Ethernet support through the debug board * CS1 timings setup */ - omap_writel(0x0000fff3, OMAP730_FLASH_CFG_1); - omap_writel(0x00000000, OMAP730_FLASH_ACFG_1); + omap_writel(0x0000fff3, OMAP7XX_FLASH_CFG_1); + omap_writel(0x00000000, OMAP7XX_FLASH_ACFG_1); /* * Configure MPU_EXT_NIRQ IO in IO_CONF9 register, * It is used as the Ethernet controller interrupt */ - omap_writel(omap_readl(OMAP730_IO_CONF_9) & 0x1FFFFFFF, OMAP730_IO_CONF_9); + omap_writel(omap_readl(OMAP7XX_IO_CONF_9) & 0x1FFFFFFF, OMAP7XX_IO_CONF_9); } MACHINE_START(OMAP_FSAMPLE, "OMAP730 F-Sample") diff --git a/arch/arm/mach-omap1/board-generic.c b/arch/arm/mach-omap1/board-generic.c index 6c8a41f20e51..e1195a3467b8 100644 --- a/arch/arm/mach-omap1/board-generic.c +++ b/arch/arm/mach-omap1/board-generic.c @@ -23,10 +23,10 @@ #include <asm/mach/map.h> #include <mach/gpio.h> -#include <mach/mux.h> -#include <mach/usb.h> -#include <mach/board.h> -#include <mach/common.h> +#include <plat/mux.h> +#include <plat/usb.h> +#include <plat/board.h> +#include <plat/common.h> static void __init omap_generic_init_irq(void) { diff --git a/arch/arm/mach-omap1/board-h2-mmc.c b/arch/arm/mach-omap1/board-h2-mmc.c index 46098f546824..b30c4990744d 100644 --- a/arch/arm/mach-omap1/board-h2-mmc.c +++ b/arch/arm/mach-omap1/board-h2-mmc.c @@ -16,7 +16,7 @@ #include <linux/i2c/tps65010.h> -#include <mach/mmc.h> +#include <plat/mmc.h> #include <mach/gpio.h> #include "board-h2.h" diff --git a/arch/arm/mach-omap1/board-h2.c b/arch/arm/mach-omap1/board-h2.c index aab860307dca..89ba8ec4bbf4 100644 --- a/arch/arm/mach-omap1/board-h2.c +++ b/arch/arm/mach-omap1/board-h2.c @@ -37,14 +37,14 @@ #include <asm/mach/flash.h> #include <asm/mach/map.h> -#include <mach/mux.h> -#include <mach/dma.h> -#include <mach/tc.h> -#include <mach/nand.h> -#include <mach/irda.h> -#include <mach/usb.h> -#include <mach/keypad.h> -#include <mach/common.h> +#include <plat/mux.h> +#include <plat/dma.h> +#include <plat/tc.h> +#include <plat/nand.h> +#include <plat/irda.h> +#include <plat/usb.h> +#include <plat/keypad.h> +#include <plat/common.h> #include "board-h2.h" diff --git a/arch/arm/mach-omap1/board-h3-mmc.c b/arch/arm/mach-omap1/board-h3-mmc.c index 5e8877ce35e0..54b0f063e263 100644 --- a/arch/arm/mach-omap1/board-h3-mmc.c +++ b/arch/arm/mach-omap1/board-h3-mmc.c @@ -16,7 +16,7 @@ #include <linux/i2c/tps65010.h> -#include <mach/mmc.h> +#include <plat/mmc.h> #include <mach/gpio.h> #include "board-h3.h" diff --git a/arch/arm/mach-omap1/board-h3.c b/arch/arm/mach-omap1/board-h3.c index 89586b80b8d5..f5cc0a730524 100644 --- a/arch/arm/mach-omap1/board-h3.c +++ b/arch/arm/mach-omap1/board-h3.c @@ -40,13 +40,13 @@ #include <asm/mach/map.h> #include <mach/irqs.h> -#include <mach/mux.h> -#include <mach/tc.h> -#include <mach/nand.h> -#include <mach/usb.h> -#include <mach/keypad.h> -#include <mach/dma.h> -#include <mach/common.h> +#include <plat/mux.h> +#include <plat/tc.h> +#include <plat/nand.h> +#include <plat/usb.h> +#include <plat/keypad.h> +#include <plat/dma.h> +#include <plat/common.h> #include "board-h3.h" diff --git a/arch/arm/mach-omap1/board-innovator.c b/arch/arm/mach-omap1/board-innovator.c index cd6c39514826..cf0fdb9c182f 100644 --- a/arch/arm/mach-omap1/board-innovator.c +++ b/arch/arm/mach-omap1/board-innovator.c @@ -30,14 +30,14 @@ #include <asm/mach/flash.h> #include <asm/mach/map.h> -#include <mach/mux.h> -#include <mach/fpga.h> +#include <plat/mux.h> +#include <plat/fpga.h> #include <mach/gpio.h> -#include <mach/tc.h> -#include <mach/usb.h> -#include <mach/keypad.h> -#include <mach/common.h> -#include <mach/mmc.h> +#include <plat/tc.h> +#include <plat/usb.h> +#include <plat/keypad.h> +#include <plat/common.h> +#include <plat/mmc.h> /* At OMAP1610 Innovator the Ethernet is directly connected to CS1 */ #define INNOVATOR1610_ETHR_START 0x04000300 diff --git a/arch/arm/mach-omap1/board-nokia770.c b/arch/arm/mach-omap1/board-nokia770.c index ed2a48a9ce74..5a275bab2dfe 100644 --- a/arch/arm/mach-omap1/board-nokia770.c +++ b/arch/arm/mach-omap1/board-nokia770.c @@ -26,17 +26,17 @@ #include <asm/mach/map.h> #include <mach/gpio.h> -#include <mach/mux.h> -#include <mach/usb.h> -#include <mach/board.h> -#include <mach/keypad.h> -#include <mach/common.h> -#include <mach/dsp_common.h> -#include <mach/omapfb.h> -#include <mach/hwa742.h> -#include <mach/lcd_mipid.h> -#include <mach/mmc.h> -#include <mach/clock.h> +#include <plat/mux.h> +#include <plat/usb.h> +#include <plat/board.h> +#include <plat/keypad.h> +#include <plat/common.h> +#include <plat/dsp_common.h> +#include <plat/omapfb.h> +#include <plat/hwa742.h> +#include <plat/lcd_mipid.h> +#include <plat/mmc.h> +#include <plat/clock.h> #define ADS7846_PENDOWN_GPIO 15 diff --git a/arch/arm/mach-omap1/board-osk.c b/arch/arm/mach-omap1/board-osk.c index ed891b8a6b15..50c92c13e48a 100644 --- a/arch/arm/mach-omap1/board-osk.c +++ b/arch/arm/mach-omap1/board-osk.c @@ -47,10 +47,10 @@ #include <asm/mach/map.h> #include <asm/mach/flash.h> -#include <mach/usb.h> -#include <mach/mux.h> -#include <mach/tc.h> -#include <mach/common.h> +#include <plat/usb.h> +#include <plat/mux.h> +#include <plat/tc.h> +#include <plat/common.h> /* At OMAP5912 OSK the Ethernet is directly connected to CS1 */ #define OMAP_OSK_ETHR_START 0x04800300 @@ -312,7 +312,7 @@ static struct omap_board_config_kernel osk_config[] __initdata = { #include <linux/spi/spi.h> #include <linux/spi/ads7846.h> -#include <mach/keypad.h> +#include <plat/keypad.h> static struct at24_platform_data at24c04 = { .byte_len = SZ_4K / 8, diff --git a/arch/arm/mach-omap1/board-palmte.c b/arch/arm/mach-omap1/board-palmte.c index 4de258420f39..9fe887262bdf 100644 --- a/arch/arm/mach-omap1/board-palmte.c +++ b/arch/arm/mach-omap1/board-palmte.c @@ -34,14 +34,14 @@ #include <asm/mach/flash.h> #include <mach/gpio.h> -#include <mach/mux.h> -#include <mach/usb.h> -#include <mach/tc.h> -#include <mach/dma.h> -#include <mach/board.h> -#include <mach/irda.h> -#include <mach/keypad.h> -#include <mach/common.h> +#include <plat/mux.h> +#include <plat/usb.h> +#include <plat/tc.h> +#include <plat/dma.h> +#include <plat/board.h> +#include <plat/irda.h> +#include <plat/keypad.h> +#include <plat/common.h> #define PALMTE_USBDETECT_GPIO 0 #define PALMTE_USB_OR_DC_GPIO 1 diff --git a/arch/arm/mach-omap1/board-palmtt.c b/arch/arm/mach-omap1/board-palmtt.c index d972cf941b76..af068e3e0fe7 100644 --- a/arch/arm/mach-omap1/board-palmtt.c +++ b/arch/arm/mach-omap1/board-palmtt.c @@ -29,16 +29,16 @@ #include <asm/mach/map.h> #include <asm/mach/flash.h> -#include <mach/led.h> +#include <plat/led.h> #include <mach/gpio.h> -#include <mach/mux.h> -#include <mach/usb.h> -#include <mach/dma.h> -#include <mach/tc.h> -#include <mach/board.h> -#include <mach/irda.h> -#include <mach/keypad.h> -#include <mach/common.h> +#include <plat/mux.h> +#include <plat/usb.h> +#include <plat/dma.h> +#include <plat/tc.h> +#include <plat/board.h> +#include <plat/irda.h> +#include <plat/keypad.h> +#include <plat/common.h> #include <linux/spi/spi.h> #include <linux/spi/ads7846.h> diff --git a/arch/arm/mach-omap1/board-palmz71.c b/arch/arm/mach-omap1/board-palmz71.c index 986bd4df0e97..c7a3b6f36500 100644 --- a/arch/arm/mach-omap1/board-palmz71.c +++ b/arch/arm/mach-omap1/board-palmz71.c @@ -33,15 +33,15 @@ #include <asm/mach/flash.h> #include <mach/gpio.h> -#include <mach/mux.h> -#include <mach/usb.h> -#include <mach/dma.h> -#include <mach/tc.h> -#include <mach/board.h> -#include <mach/irda.h> -#include <mach/keypad.h> -#include <mach/common.h> -#include <mach/omap-alsa.h> +#include <plat/mux.h> +#include <plat/usb.h> +#include <plat/dma.h> +#include <plat/tc.h> +#include <plat/board.h> +#include <plat/irda.h> +#include <plat/keypad.h> +#include <plat/common.h> +#include <plat/omap-alsa.h> #include <linux/spi/spi.h> #include <linux/spi/ads7846.h> diff --git a/arch/arm/mach-omap1/board-perseus2.c b/arch/arm/mach-omap1/board-perseus2.c index 83406699f310..ca7df1e93efc 100644 --- a/arch/arm/mach-omap1/board-perseus2.c +++ b/arch/arm/mach-omap1/board-perseus2.c @@ -26,14 +26,14 @@ #include <asm/mach/flash.h> #include <asm/mach/map.h> -#include <mach/tc.h> +#include <plat/tc.h> #include <mach/gpio.h> -#include <mach/mux.h> -#include <mach/fpga.h> -#include <mach/nand.h> -#include <mach/keypad.h> -#include <mach/common.h> -#include <mach/board.h> +#include <plat/mux.h> +#include <plat/fpga.h> +#include <plat/nand.h> +#include <plat/keypad.h> +#include <plat/common.h> +#include <plat/board.h> static int p2_keymap[] = { KEY(0,0,KEY_UP), @@ -74,7 +74,7 @@ static struct resource smc91x_resources[] = { .flags = IORESOURCE_MEM, }, [1] = { - .start = INT_730_MPU_EXT_NIRQ, + .start = INT_7XX_MPU_EXT_NIRQ, .end = 0, .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE, }, @@ -163,8 +163,8 @@ static struct platform_device smc91x_device = { static struct resource kp_resources[] = { [0] = { - .start = INT_730_MPUIO_KEYPAD, - .end = INT_730_MPUIO_KEYPAD, + .start = INT_7XX_MPUIO_KEYPAD, + .end = INT_7XX_MPUIO_KEYPAD, .flags = IORESOURCE_IRQ, }, }; @@ -270,7 +270,7 @@ static void __init omap_perseus2_map_io(void) /* * Hold GSM Reset until needed */ - omap_writew(omap_readw(OMAP730_DSP_M_CTL) & ~1, OMAP730_DSP_M_CTL); + omap_writew(omap_readw(OMAP7XX_DSP_M_CTL) & ~1, OMAP7XX_DSP_M_CTL); /* * UARTs -> done automagically by 8250 driver @@ -281,21 +281,21 @@ static void __init omap_perseus2_map_io(void) */ /* Flash: CS0 timings setup */ - omap_writel(0x0000fff3, OMAP730_FLASH_CFG_0); - omap_writel(0x00000088, OMAP730_FLASH_ACFG_0); + omap_writel(0x0000fff3, OMAP7XX_FLASH_CFG_0); + omap_writel(0x00000088, OMAP7XX_FLASH_ACFG_0); /* * Ethernet support through the debug board * CS1 timings setup */ - omap_writel(0x0000fff3, OMAP730_FLASH_CFG_1); - omap_writel(0x00000000, OMAP730_FLASH_ACFG_1); + omap_writel(0x0000fff3, OMAP7XX_FLASH_CFG_1); + omap_writel(0x00000000, OMAP7XX_FLASH_ACFG_1); /* * Configure MPU_EXT_NIRQ IO in IO_CONF9 register, * It is used as the Ethernet controller interrupt */ - omap_writel(omap_readl(OMAP730_IO_CONF_9) & 0x1FFFFFFF, OMAP730_IO_CONF_9); + omap_writel(omap_readl(OMAP7XX_IO_CONF_9) & 0x1FFFFFFF, OMAP7XX_IO_CONF_9); } MACHINE_START(OMAP_PERSEUS2, "OMAP730 Perseus2") diff --git a/arch/arm/mach-omap1/board-sx1-mmc.c b/arch/arm/mach-omap1/board-sx1-mmc.c index 58a46e4e45c3..5b33ae8141bc 100644 --- a/arch/arm/mach-omap1/board-sx1-mmc.c +++ b/arch/arm/mach-omap1/board-sx1-mmc.c @@ -15,9 +15,9 @@ #include <linux/platform_device.h> #include <mach/hardware.h> -#include <mach/mmc.h> +#include <plat/mmc.h> #include <mach/gpio.h> -#include <mach/board-sx1.h> +#include <plat/board-sx1.h> #if defined(CONFIG_MMC_OMAP) || defined(CONFIG_MMC_OMAP_MODULE) diff --git a/arch/arm/mach-omap1/board-sx1.c b/arch/arm/mach-omap1/board-sx1.c index 056ae64e0f55..7a97fac83d8d 100644 --- a/arch/arm/mach-omap1/board-sx1.c +++ b/arch/arm/mach-omap1/board-sx1.c @@ -33,15 +33,15 @@ #include <asm/mach/map.h> #include <mach/gpio.h> -#include <mach/mux.h> -#include <mach/dma.h> -#include <mach/irda.h> -#include <mach/usb.h> -#include <mach/tc.h> -#include <mach/board.h> -#include <mach/common.h> -#include <mach/keypad.h> -#include <mach/board-sx1.h> +#include <plat/mux.h> +#include <plat/dma.h> +#include <plat/irda.h> +#include <plat/usb.h> +#include <plat/tc.h> +#include <plat/board.h> +#include <plat/common.h> +#include <plat/keypad.h> +#include <plat/board-sx1.h> /* Write to I2C device */ int sx1_i2c_write_byte(u8 devaddr, u8 regoffset, u8 value) diff --git a/arch/arm/mach-omap1/board-voiceblue.c b/arch/arm/mach-omap1/board-voiceblue.c index 07b07522d5bf..35c75c1bd0aa 100644 --- a/arch/arm/mach-omap1/board-voiceblue.c +++ b/arch/arm/mach-omap1/board-voiceblue.c @@ -29,11 +29,11 @@ #include <asm/mach/flash.h> #include <asm/mach/map.h> -#include <mach/common.h> +#include <plat/common.h> #include <mach/gpio.h> -#include <mach/mux.h> -#include <mach/tc.h> -#include <mach/usb.h> +#include <plat/mux.h> +#include <plat/tc.h> +#include <plat/usb.h> static struct plat_serial8250_port voiceblue_ports[] = { { diff --git a/arch/arm/mach-omap1/clock.c b/arch/arm/mach-omap1/clock.c index 436eed22801b..b4fec9a6e89e 100644 --- a/arch/arm/mach-omap1/clock.c +++ b/arch/arm/mach-omap1/clock.c @@ -22,10 +22,10 @@ #include <asm/mach-types.h> #include <asm/clkdev.h> -#include <mach/cpu.h> -#include <mach/usb.h> -#include <mach/clock.h> -#include <mach/sram.h> +#include <plat/cpu.h> +#include <plat/usb.h> +#include <plat/clock.h> +#include <plat/sram.h> static const struct clkops clkops_generic; static const struct clkops clkops_uart; @@ -69,13 +69,13 @@ struct omap_clk { } #define CK_310 (1 << 0) -#define CK_730 (1 << 1) +#define CK_7XX (1 << 1) #define CK_1510 (1 << 2) #define CK_16XX (1 << 3) static struct omap_clk omap_clks[] = { /* non-ULPD clocks */ - CLK(NULL, "ck_ref", &ck_ref, CK_16XX | CK_1510 | CK_310), + CLK(NULL, "ck_ref", &ck_ref, CK_16XX | CK_1510 | CK_310 | CK_7XX), CLK(NULL, "ck_dpll1", &ck_dpll1, CK_16XX | CK_1510 | CK_310), /* CK_GEN1 clocks */ CLK(NULL, "ck_dpll1out", &ck_dpll1out.clk, CK_16XX), @@ -83,7 +83,7 @@ static struct omap_clk omap_clks[] = { CLK(NULL, "arm_ck", &arm_ck, CK_16XX | CK_1510 | CK_310), CLK(NULL, "armper_ck", &armper_ck.clk, CK_16XX | CK_1510 | CK_310), CLK(NULL, "arm_gpio_ck", &arm_gpio_ck, CK_1510 | CK_310), - CLK(NULL, "armxor_ck", &armxor_ck.clk, CK_16XX | CK_1510 | CK_310), + CLK(NULL, "armxor_ck", &armxor_ck.clk, CK_16XX | CK_1510 | CK_310 | CK_7XX), CLK(NULL, "armtim_ck", &armtim_ck.clk, CK_16XX | CK_1510 | CK_310), CLK("omap_wdt", "fck", &armwdt_ck.clk, CK_16XX | CK_1510 | CK_310), CLK("omap_wdt", "ick", &armper_ck.clk, CK_16XX), @@ -97,7 +97,7 @@ static struct omap_clk omap_clks[] = { CLK(NULL, "dspxor_ck", &dspxor_ck, CK_16XX | CK_1510 | CK_310), CLK(NULL, "dsptim_ck", &dsptim_ck, CK_16XX | CK_1510 | CK_310), /* CK_GEN3 clocks */ - CLK(NULL, "tc_ck", &tc_ck.clk, CK_16XX | CK_1510 | CK_310 | CK_730), + CLK(NULL, "tc_ck", &tc_ck.clk, CK_16XX | CK_1510 | CK_310 | CK_7XX), CLK(NULL, "tipb_ck", &tipb_ck, CK_1510 | CK_310), CLK(NULL, "l3_ocpi_ck", &l3_ocpi_ck, CK_16XX), CLK(NULL, "tc1_ck", &tc1_ck, CK_16XX), @@ -108,7 +108,7 @@ static struct omap_clk omap_clks[] = { CLK(NULL, "lb_ck", &lb_ck.clk, CK_1510 | CK_310), CLK(NULL, "rhea1_ck", &rhea1_ck, CK_16XX), CLK(NULL, "rhea2_ck", &rhea2_ck, CK_16XX), - CLK(NULL, "lcd_ck", &lcd_ck_16xx, CK_16XX | CK_730), + CLK(NULL, "lcd_ck", &lcd_ck_16xx, CK_16XX | CK_7XX), CLK(NULL, "lcd_ck", &lcd_ck_1510.clk, CK_1510 | CK_310), /* ULPD clocks */ CLK(NULL, "uart1_ck", &uart1_1510, CK_1510 | CK_310), @@ -398,7 +398,7 @@ static int omap1_select_table_rate(struct clk * clk, unsigned long rate) * Reprogramming the DPLL is tricky, it must be done from SRAM. * (on 730, bit 13 must always be 1) */ - if (cpu_is_omap730()) + if (cpu_is_omap7xx()) omap_sram_reprogram_clock(ptr->dpllctl_val, ptr->ckctl_val | 0x2000); else omap_sram_reprogram_clock(ptr->dpllctl_val, ptr->ckctl_val); @@ -783,8 +783,8 @@ int __init omap1_clk_init(void) cpu_mask |= CK_16XX; if (cpu_is_omap1510()) cpu_mask |= CK_1510; - if (cpu_is_omap730()) - cpu_mask |= CK_730; + if (cpu_is_omap7xx()) + cpu_mask |= CK_7XX; if (cpu_is_omap310()) cpu_mask |= CK_310; @@ -800,7 +800,7 @@ int __init omap1_clk_init(void) crystal_type = info->system_clock_type; } -#if defined(CONFIG_ARCH_OMAP730) +#if defined(CONFIG_ARCH_OMAP730) || defined(CONFIG_ARCH_OMAP850) ck_ref.rate = 13000000; #elif defined(CONFIG_ARCH_OMAP16XX) if (crystal_type == 2) @@ -847,7 +847,7 @@ int __init omap1_clk_init(void) printk(KERN_ERR "System frequencies not set. Check your config.\n"); /* Guess sane values (60MHz) */ omap_writew(0x2290, DPLL_CTL); - omap_writew(cpu_is_omap730() ? 0x3005 : 0x1005, ARM_CKCTL); + omap_writew(cpu_is_omap7xx() ? 0x3005 : 0x1005, ARM_CKCTL); ck_dpll1.rate = 60000000; } #endif @@ -862,7 +862,7 @@ int __init omap1_clk_init(void) #if defined(CONFIG_MACH_OMAP_PERSEUS2) || defined(CONFIG_MACH_OMAP_FSAMPLE) /* Select slicer output as OMAP input clock */ - omap_writew(omap_readw(OMAP730_PCC_UPLD_CTRL) & ~0x1, OMAP730_PCC_UPLD_CTRL); + omap_writew(omap_readw(OMAP7XX_PCC_UPLD_CTRL) & ~0x1, OMAP7XX_PCC_UPLD_CTRL); #endif /* Amstrad Delta wants BCLK high when inactive */ @@ -873,7 +873,7 @@ int __init omap1_clk_init(void) /* Turn off DSP and ARM_TIMXO. Make sure ARM_INTHCK is not divided */ /* (on 730, bit 13 must not be cleared) */ - if (cpu_is_omap730()) + if (cpu_is_omap7xx()) omap_writew(omap_readw(ARM_CKCTL) & 0x2fff, ARM_CKCTL); else omap_writew(omap_readw(ARM_CKCTL) & 0x0fff, ARM_CKCTL); diff --git a/arch/arm/mach-omap1/devices.c b/arch/arm/mach-omap1/devices.c index 06808434ea04..6d2f72dcbb04 100644 --- a/arch/arm/mach-omap1/devices.c +++ b/arch/arm/mach-omap1/devices.c @@ -18,11 +18,11 @@ #include <mach/hardware.h> #include <asm/mach/map.h> -#include <mach/tc.h> -#include <mach/board.h> -#include <mach/mux.h> +#include <plat/tc.h> +#include <plat/board.h> +#include <plat/mux.h> #include <mach/gpio.h> -#include <mach/mmc.h> +#include <plat/mmc.h> /*-------------------------------------------------------------------------*/ diff --git a/arch/arm/mach-omap1/fpga.c b/arch/arm/mach-omap1/fpga.c index 4f2b8a7adb19..5cfce1636da0 100644 --- a/arch/arm/mach-omap1/fpga.c +++ b/arch/arm/mach-omap1/fpga.c @@ -27,7 +27,7 @@ #include <asm/irq.h> #include <asm/mach/irq.h> -#include <mach/fpga.h> +#include <plat/fpga.h> #include <mach/gpio.h> static void fpga_mask_irq(unsigned int irq) diff --git a/arch/arm/mach-omap1/id.c b/arch/arm/mach-omap1/id.c index e5dcdf764c91..a0e3560b39db 100644 --- a/arch/arm/mach-omap1/id.c +++ b/arch/arm/mach-omap1/id.c @@ -15,7 +15,7 @@ #include <linux/kernel.h> #include <linux/init.h> #include <linux/io.h> -#include <mach/cpu.h> +#include <plat/cpu.h> #define OMAP_DIE_ID_0 0xfffe1800 #define OMAP_DIE_ID_1 0xfffe1804 diff --git a/arch/arm/mach-omap1/include/mach/clkdev.h b/arch/arm/mach-omap1/include/mach/clkdev.h new file mode 100644 index 000000000000..ea8640e4603e --- /dev/null +++ b/arch/arm/mach-omap1/include/mach/clkdev.h @@ -0,0 +1,5 @@ +/* + * arch/arm/mach-omap1/include/mach/clkdev.h + */ + +#include <plat/clkdev.h> diff --git a/arch/arm/mach-omap1/include/mach/debug-macro.S b/arch/arm/mach-omap1/include/mach/debug-macro.S new file mode 100644 index 000000000000..aedb746fc33c --- /dev/null +++ b/arch/arm/mach-omap1/include/mach/debug-macro.S @@ -0,0 +1,45 @@ +/* arch/arm/mach-omap1/include/mach/debug-macro.S + * + * Debugging macro include header + * + * Copyright (C) 1994-1999 Russell King + * Moved from linux/arch/arm/kernel/debug.S by Ben Dooks + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * +*/ + + .macro addruart,rx + mrc p15, 0, \rx, c1, c0 + tst \rx, #1 @ MMU enabled? + moveq \rx, #0xff000000 @ physical base address + movne \rx, #0xfe000000 @ virtual base + orr \rx, \rx, #0x00fb0000 +#ifdef CONFIG_OMAP_LL_DEBUG_UART3 + orr \rx, \rx, #0x00009000 @ UART 3 +#endif +#if defined(CONFIG_OMAP_LL_DEBUG_UART2) || defined(CONFIG_OMAP_LL_DEBUG_UART3) + orr \rx, \rx, #0x00000800 @ UART 2 & 3 +#endif + .endm + + .macro senduart,rd,rx + strb \rd, [\rx] + .endm + + .macro busyuart,rd,rx +1001: ldrb \rd, [\rx, #(0x5 << 2)] @ OMAP-1510 and friends + and \rd, \rd, #0x60 + teq \rd, #0x60 + beq 1002f + ldrb \rd, [\rx, #(0x5 << 0)] @ OMAP-730 only + and \rd, \rd, #0x60 + teq \rd, #0x60 + bne 1001b +1002: + .endm + + .macro waituart,rd,rx + .endm diff --git a/arch/arm/mach-omap1/include/mach/entry-macro.S b/arch/arm/mach-omap1/include/mach/entry-macro.S new file mode 100644 index 000000000000..df9060edda28 --- /dev/null +++ b/arch/arm/mach-omap1/include/mach/entry-macro.S @@ -0,0 +1,58 @@ +/* + * arch/arm/mach-omap1/include/mach/entry-macro.S + * + * Low-level IRQ helper macros for OMAP-based platforms + * + * Copyright (C) 2009 Texas Instruments + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ +#include <mach/hardware.h> +#include <mach/io.h> +#include <mach/irqs.h> +#include <asm/hardware/gic.h> + +#if (defined(CONFIG_ARCH_OMAP730)||defined(CONFIG_ARCH_OMAP850)) && \ + (defined(CONFIG_ARCH_OMAP15XX) || defined(CONFIG_ARCH_OMAP16XX)) +#error "FIXME: OMAP7XX doesn't support multiple-OMAP" +#elif defined(CONFIG_ARCH_OMAP730) || defined(CONFIG_ARCH_OMAP850) +#define INT_IH2_IRQ INT_7XX_IH2_IRQ +#elif defined(CONFIG_ARCH_OMAP15XX) +#define INT_IH2_IRQ INT_1510_IH2_IRQ +#elif defined(CONFIG_ARCH_OMAP16XX) +#define INT_IH2_IRQ INT_1610_IH2_IRQ +#else +#warning "IH2 IRQ defaulted" +#define INT_IH2_IRQ INT_1510_IH2_IRQ +#endif + + .macro disable_fiq + .endm + + .macro get_irqnr_preamble, base, tmp + .endm + + .macro arch_ret_to_user, tmp1, tmp2 + .endm + + .macro get_irqnr_and_base, irqnr, irqstat, base, tmp + ldr \base, =OMAP1_IO_ADDRESS(OMAP_IH1_BASE) + ldr \irqnr, [\base, #IRQ_ITR_REG_OFFSET] + ldr \tmp, [\base, #IRQ_MIR_REG_OFFSET] + mov \irqstat, #0xffffffff + bic \tmp, \irqstat, \tmp + tst \irqnr, \tmp + beq 1510f + + ldr \irqnr, [\base, #IRQ_SIR_FIQ_REG_OFFSET] + cmp \irqnr, #0 + ldreq \irqnr, [\base, #IRQ_SIR_IRQ_REG_OFFSET] + cmpeq \irqnr, #INT_IH2_IRQ + ldreq \base, =OMAP1_IO_ADDRESS(OMAP_IH2_BASE) + ldreq \irqnr, [\base, #IRQ_SIR_IRQ_REG_OFFSET] + addeqs \irqnr, \irqnr, #32 +1510: + .endm + diff --git a/arch/arm/mach-omap1/include/mach/gpio.h b/arch/arm/mach-omap1/include/mach/gpio.h new file mode 100644 index 000000000000..e737706a8fe1 --- /dev/null +++ b/arch/arm/mach-omap1/include/mach/gpio.h @@ -0,0 +1,5 @@ +/* + * arch/arm/mach-omap1/include/mach/gpio.h + */ + +#include <plat/gpio.h> diff --git a/arch/arm/mach-omap1/include/mach/hardware.h b/arch/arm/mach-omap1/include/mach/hardware.h new file mode 100644 index 000000000000..a3f6287b2007 --- /dev/null +++ b/arch/arm/mach-omap1/include/mach/hardware.h @@ -0,0 +1,5 @@ +/* + * arch/arm/mach-omap1/include/mach/hardware.h + */ + +#include <plat/hardware.h> diff --git a/arch/arm/mach-omap1/include/mach/io.h b/arch/arm/mach-omap1/include/mach/io.h new file mode 100644 index 000000000000..57bdf74a3e64 --- /dev/null +++ b/arch/arm/mach-omap1/include/mach/io.h @@ -0,0 +1,5 @@ +/* + * arch/arm/mach-omap1/include/mach/io.h + */ + +#include <plat/io.h> diff --git a/arch/arm/mach-omap1/include/mach/irqs.h b/arch/arm/mach-omap1/include/mach/irqs.h new file mode 100644 index 000000000000..9292fdc1cb0b --- /dev/null +++ b/arch/arm/mach-omap1/include/mach/irqs.h @@ -0,0 +1,5 @@ +/* + * arch/arm/mach-omap1/include/mach/irqs.h + */ + +#include <plat/irqs.h> diff --git a/arch/arm/mach-omap1/include/mach/memory.h b/arch/arm/mach-omap1/include/mach/memory.h new file mode 100644 index 000000000000..e9b600c113ef --- /dev/null +++ b/arch/arm/mach-omap1/include/mach/memory.h @@ -0,0 +1,5 @@ +/* + * arch/arm/mach-omap1/include/mach/memory.h + */ + +#include <plat/memory.h> diff --git a/arch/arm/plat-omap/include/mach/mtd-xip.h b/arch/arm/mach-omap1/include/mach/mtd-xip.h index f82a8dcaad94..f82a8dcaad94 100644 --- a/arch/arm/plat-omap/include/mach/mtd-xip.h +++ b/arch/arm/mach-omap1/include/mach/mtd-xip.h diff --git a/arch/arm/mach-omap1/include/mach/smp.h b/arch/arm/mach-omap1/include/mach/smp.h new file mode 100644 index 000000000000..80a371c06e59 --- /dev/null +++ b/arch/arm/mach-omap1/include/mach/smp.h @@ -0,0 +1,5 @@ +/* + * arch/arm/mach-omap1/include/mach/smp.h + */ + +#include <plat/smp.h> diff --git a/arch/arm/mach-omap1/include/mach/system.h b/arch/arm/mach-omap1/include/mach/system.h new file mode 100644 index 000000000000..a6c1b3a16dfc --- /dev/null +++ b/arch/arm/mach-omap1/include/mach/system.h @@ -0,0 +1,5 @@ +/* + * arch/arm/mach-omap1/include/mach/system.h + */ + +#include <plat/system.h> diff --git a/arch/arm/mach-omap1/include/mach/timex.h b/arch/arm/mach-omap1/include/mach/timex.h new file mode 100644 index 000000000000..4793790d53cc --- /dev/null +++ b/arch/arm/mach-omap1/include/mach/timex.h @@ -0,0 +1,5 @@ +/* + * arch/arm/mach-omap1/include/mach/timex.h + */ + +#include <plat/timex.h> diff --git a/arch/arm/mach-omap1/include/mach/uncompress.h b/arch/arm/mach-omap1/include/mach/uncompress.h new file mode 100644 index 000000000000..0ff22dc075c7 --- /dev/null +++ b/arch/arm/mach-omap1/include/mach/uncompress.h @@ -0,0 +1,5 @@ +/* + * arch/arm/mach-omap1/include/mach/uncompress.h + */ + +#include <plat/uncompress.h> diff --git a/arch/arm/mach-omap1/include/mach/vmalloc.h b/arch/arm/mach-omap1/include/mach/vmalloc.h new file mode 100644 index 000000000000..1b2af14df151 --- /dev/null +++ b/arch/arm/mach-omap1/include/mach/vmalloc.h @@ -0,0 +1,20 @@ +/* + * arch/arm/mach-omap1/include/mach/vmalloc.h + * + * Copyright (C) 2000 Russell King. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ +#define VMALLOC_END (PAGE_OFFSET + 0x18000000) diff --git a/arch/arm/mach-omap1/io.c b/arch/arm/mach-omap1/io.c index 7030f9281ea1..2a6d68aa3489 100644 --- a/arch/arm/mach-omap1/io.c +++ b/arch/arm/mach-omap1/io.c @@ -15,8 +15,8 @@ #include <asm/tlb.h> #include <asm/mach/map.h> -#include <mach/mux.h> -#include <mach/tc.h> +#include <plat/mux.h> +#include <plat/tc.h> extern int omap1_clk_init(void); extern void omap_check_revision(void); @@ -36,33 +36,17 @@ static struct map_desc omap_io_desc[] __initdata = { } }; -#ifdef CONFIG_ARCH_OMAP730 -static struct map_desc omap730_io_desc[] __initdata = { +#if defined (CONFIG_ARCH_OMAP730) || defined (CONFIG_ARCH_OMAP850) +static struct map_desc omap7xx_io_desc[] __initdata = { { - .virtual = OMAP730_DSP_BASE, - .pfn = __phys_to_pfn(OMAP730_DSP_START), - .length = OMAP730_DSP_SIZE, + .virtual = OMAP7XX_DSP_BASE, + .pfn = __phys_to_pfn(OMAP7XX_DSP_START), + .length = OMAP7XX_DSP_SIZE, .type = MT_DEVICE }, { - .virtual = OMAP730_DSPREG_BASE, - .pfn = __phys_to_pfn(OMAP730_DSPREG_START), - .length = OMAP730_DSPREG_SIZE, - .type = MT_DEVICE - } -}; -#endif - -#ifdef CONFIG_ARCH_OMAP850 -static struct map_desc omap850_io_desc[] __initdata = { - { - .virtual = OMAP850_DSP_BASE, - .pfn = __phys_to_pfn(OMAP850_DSP_START), - .length = OMAP850_DSP_SIZE, - .type = MT_DEVICE - }, { - .virtual = OMAP850_DSPREG_BASE, - .pfn = __phys_to_pfn(OMAP850_DSPREG_START), - .length = OMAP850_DSPREG_SIZE, + .virtual = OMAP7XX_DSPREG_BASE, + .pfn = __phys_to_pfn(OMAP7XX_DSPREG_START), + .length = OMAP7XX_DSPREG_SIZE, .type = MT_DEVICE } }; @@ -120,18 +104,11 @@ void __init omap1_map_common_io(void) */ omap_check_revision(); -#ifdef CONFIG_ARCH_OMAP730 - if (cpu_is_omap730()) { - iotable_init(omap730_io_desc, ARRAY_SIZE(omap730_io_desc)); - } -#endif - -#ifdef CONFIG_ARCH_OMAP850 - if (cpu_is_omap850()) { - iotable_init(omap850_io_desc, ARRAY_SIZE(omap850_io_desc)); +#if defined (CONFIG_ARCH_OMAP730) || defined (CONFIG_ARCH_OMAP850) + if (cpu_is_omap7xx()) { + iotable_init(omap7xx_io_desc, ARRAY_SIZE(omap7xx_io_desc)); } #endif - #ifdef CONFIG_ARCH_OMAP15XX if (cpu_is_omap15xx()) { iotable_init(omap1510_io_desc, ARRAY_SIZE(omap1510_io_desc)); diff --git a/arch/arm/mach-omap1/irq.c b/arch/arm/mach-omap1/irq.c index de03c8448994..db913c34d1fe 100644 --- a/arch/arm/mach-omap1/irq.c +++ b/arch/arm/mach-omap1/irq.c @@ -46,7 +46,7 @@ #include <asm/irq.h> #include <asm/mach/irq.h> #include <mach/gpio.h> -#include <mach/cpu.h> +#include <plat/cpu.h> #define IRQ_BANK(irq) ((irq) >> 5) #define IRQ_BIT(irq) ((irq) & 0x1f) @@ -137,16 +137,8 @@ static void omap_irq_set_cfg(int irq, int fiq, int priority, int trigger) irq_bank_writel(val, bank, offset); } -#ifdef CONFIG_ARCH_OMAP730 -static struct omap_irq_bank omap730_irq_banks[] = { - { .base_reg = OMAP_IH1_BASE, .trigger_map = 0xb3f8e22f }, - { .base_reg = OMAP_IH2_BASE, .trigger_map = 0xfdb9c1f2 }, - { .base_reg = OMAP_IH2_BASE + 0x100, .trigger_map = 0x800040f3 }, -}; -#endif - -#ifdef CONFIG_ARCH_OMAP850 -static struct omap_irq_bank omap850_irq_banks[] = { +#if defined (CONFIG_ARCH_OMAP730) || defined (CONFIG_ARCH_OMAP850) +static struct omap_irq_bank omap7xx_irq_banks[] = { { .base_reg = OMAP_IH1_BASE, .trigger_map = 0xb3f8e22f }, { .base_reg = OMAP_IH2_BASE, .trigger_map = 0xfdb9c1f2 }, { .base_reg = OMAP_IH2_BASE + 0x100, .trigger_map = 0x800040f3 }, @@ -186,16 +178,10 @@ void __init omap_init_irq(void) { int i, j; -#ifdef CONFIG_ARCH_OMAP730 - if (cpu_is_omap730()) { - irq_banks = omap730_irq_banks; - irq_bank_count = ARRAY_SIZE(omap730_irq_banks); - } -#endif -#ifdef CONFIG_ARCH_OMAP850 - if (cpu_is_omap850()) { - irq_banks = omap850_irq_banks; - irq_bank_count = ARRAY_SIZE(omap850_irq_banks); +#if defined(CONFIG_ARCH_OMAP730) || defined(CONFIG_ARCH_OMAP850) + if (cpu_is_omap7xx()) { + irq_banks = omap7xx_irq_banks; + irq_bank_count = ARRAY_SIZE(omap7xx_irq_banks); } #endif #ifdef CONFIG_ARCH_OMAP15XX @@ -247,10 +233,8 @@ void __init omap_init_irq(void) /* Unmask level 2 handler */ - if (cpu_is_omap730()) - omap_unmask_irq(INT_730_IH2_IRQ); - else if (cpu_is_omap850()) - omap_unmask_irq(INT_850_IH2_IRQ); + if (cpu_is_omap7xx()) + omap_unmask_irq(INT_7XX_IH2_IRQ); else if (cpu_is_omap15xx()) omap_unmask_irq(INT_1510_IH2_IRQ); else if (cpu_is_omap16xx()) diff --git a/arch/arm/mach-omap1/leds-h2p2-debug.c b/arch/arm/mach-omap1/leds-h2p2-debug.c index 17c9d0e04216..b4f9be52e1e8 100644 --- a/arch/arm/mach-omap1/leds-h2p2-debug.c +++ b/arch/arm/mach-omap1/leds-h2p2-debug.c @@ -19,7 +19,7 @@ #include <asm/system.h> #include <asm/mach-types.h> -#include <mach/fpga.h> +#include <plat/fpga.h> #include <mach/gpio.h> #include "leds.h" diff --git a/arch/arm/mach-omap1/leds.c b/arch/arm/mach-omap1/leds.c index 8cbf2562dcaa..277f356d4cd0 100644 --- a/arch/arm/mach-omap1/leds.c +++ b/arch/arm/mach-omap1/leds.c @@ -10,7 +10,7 @@ #include <asm/mach-types.h> #include <mach/gpio.h> -#include <mach/mux.h> +#include <plat/mux.h> #include "leds.h" diff --git a/arch/arm/mach-omap1/mailbox.c b/arch/arm/mach-omap1/mailbox.c index 6810b4aeb02c..caf889aaa248 100644 --- a/arch/arm/mach-omap1/mailbox.c +++ b/arch/arm/mach-omap1/mailbox.c @@ -14,7 +14,7 @@ #include <linux/interrupt.h> #include <linux/platform_device.h> #include <linux/io.h> -#include <mach/mailbox.h> +#include <plat/mailbox.h> #include <mach/irqs.h> #define MAILBOX_ARM2DSP1 0x00 diff --git a/arch/arm/mach-omap1/mcbsp.c b/arch/arm/mach-omap1/mcbsp.c index 505d98cfe508..6bddce104ee9 100644 --- a/arch/arm/mach-omap1/mcbsp.c +++ b/arch/arm/mach-omap1/mcbsp.c @@ -18,11 +18,11 @@ #include <linux/platform_device.h> #include <mach/irqs.h> -#include <mach/dma.h> -#include <mach/mux.h> -#include <mach/cpu.h> -#include <mach/mcbsp.h> -#include <mach/dsp_common.h> +#include <plat/dma.h> +#include <plat/mux.h> +#include <plat/cpu.h> +#include <plat/mcbsp.h> +#include <plat/dsp_common.h> #define DPS_RSTCT2_PER_EN (1 << 0) #define DSP_RSTCT2_WD_PER_EN (1 << 1) @@ -79,29 +79,29 @@ static struct omap_mcbsp_ops omap1_mcbsp_ops = { .free = omap1_mcbsp_free, }; -#ifdef CONFIG_ARCH_OMAP730 -static struct omap_mcbsp_platform_data omap730_mcbsp_pdata[] = { +#if defined(CONFIG_ARCH_OMAP730) || defined(CONFIG_ARCH_OMAP850) +static struct omap_mcbsp_platform_data omap7xx_mcbsp_pdata[] = { { - .phys_base = OMAP730_MCBSP1_BASE, + .phys_base = OMAP7XX_MCBSP1_BASE, .dma_rx_sync = OMAP_DMA_MCBSP1_RX, .dma_tx_sync = OMAP_DMA_MCBSP1_TX, - .rx_irq = INT_730_McBSP1RX, - .tx_irq = INT_730_McBSP1TX, + .rx_irq = INT_7XX_McBSP1RX, + .tx_irq = INT_7XX_McBSP1TX, .ops = &omap1_mcbsp_ops, }, { - .phys_base = OMAP730_MCBSP2_BASE, + .phys_base = OMAP7XX_MCBSP2_BASE, .dma_rx_sync = OMAP_DMA_MCBSP3_RX, .dma_tx_sync = OMAP_DMA_MCBSP3_TX, - .rx_irq = INT_730_McBSP2RX, - .tx_irq = INT_730_McBSP2TX, + .rx_irq = INT_7XX_McBSP2RX, + .tx_irq = INT_7XX_McBSP2TX, .ops = &omap1_mcbsp_ops, }, }; -#define OMAP730_MCBSP_PDATA_SZ ARRAY_SIZE(omap730_mcbsp_pdata) +#define OMAP7XX_MCBSP_PDATA_SZ ARRAY_SIZE(omap7xx_mcbsp_pdata) #else -#define omap730_mcbsp_pdata NULL -#define OMAP730_MCBSP_PDATA_SZ 0 +#define omap7xx_mcbsp_pdata NULL +#define OMAP7XX_MCBSP_PDATA_SZ 0 #endif #ifdef CONFIG_ARCH_OMAP15XX @@ -172,8 +172,8 @@ static struct omap_mcbsp_platform_data omap16xx_mcbsp_pdata[] = { int __init omap1_mcbsp_init(void) { - if (cpu_is_omap730()) - omap_mcbsp_count = OMAP730_MCBSP_PDATA_SZ; + if (cpu_is_omap7xx()) + omap_mcbsp_count = OMAP7XX_MCBSP_PDATA_SZ; if (cpu_is_omap15xx()) omap_mcbsp_count = OMAP15XX_MCBSP_PDATA_SZ; if (cpu_is_omap16xx()) @@ -184,9 +184,9 @@ int __init omap1_mcbsp_init(void) if (!mcbsp_ptr) return -ENOMEM; - if (cpu_is_omap730()) - omap_mcbsp_register_board_cfg(omap730_mcbsp_pdata, - OMAP730_MCBSP_PDATA_SZ); + if (cpu_is_omap7xx()) + omap_mcbsp_register_board_cfg(omap7xx_mcbsp_pdata, + OMAP7XX_MCBSP_PDATA_SZ); if (cpu_is_omap15xx()) omap_mcbsp_register_board_cfg(omap15xx_mcbsp_pdata, diff --git a/arch/arm/mach-omap1/mux.c b/arch/arm/mach-omap1/mux.c index 721e0d9d8b1d..1e6145c9ee93 100644 --- a/arch/arm/mach-omap1/mux.c +++ b/arch/arm/mach-omap1/mux.c @@ -29,53 +29,34 @@ #include <asm/system.h> -#include <mach/mux.h> +#include <plat/mux.h> #ifdef CONFIG_OMAP_MUX static struct omap_mux_cfg arch_mux_cfg; -#ifdef CONFIG_ARCH_OMAP730 -static struct pin_config __initdata_or_module omap730_pins[] = { -MUX_CFG_730("E2_730_KBR0", 12, 21, 0, 20, 1, 0) -MUX_CFG_730("J7_730_KBR1", 12, 25, 0, 24, 1, 0) -MUX_CFG_730("E1_730_KBR2", 12, 29, 0, 28, 1, 0) -MUX_CFG_730("F3_730_KBR3", 13, 1, 0, 0, 1, 0) -MUX_CFG_730("D2_730_KBR4", 13, 5, 0, 4, 1, 0) -MUX_CFG_730("C2_730_KBC0", 13, 9, 0, 8, 1, 0) -MUX_CFG_730("D3_730_KBC1", 13, 13, 0, 12, 1, 0) -MUX_CFG_730("E4_730_KBC2", 13, 17, 0, 16, 1, 0) -MUX_CFG_730("F4_730_KBC3", 13, 21, 0, 20, 1, 0) -MUX_CFG_730("E3_730_KBC4", 13, 25, 0, 24, 1, 0) - -MUX_CFG_730("AA17_730_USB_DM", 2, 21, 0, 20, 0, 0) -MUX_CFG_730("W16_730_USB_PU_EN", 2, 25, 0, 24, 0, 0) -MUX_CFG_730("W17_730_USB_VBUSI", 2, 29, 0, 28, 0, 0) +#if defined(CONFIG_ARCH_OMAP730) || defined(CONFIG_ARCH_OMAP850) +static struct pin_config __initdata_or_module omap7xx_pins[] = { +MUX_CFG_7XX("E2_7XX_KBR0", 12, 21, 0, 20, 1, 0) +MUX_CFG_7XX("J7_7XX_KBR1", 12, 25, 0, 24, 1, 0) +MUX_CFG_7XX("E1_7XX_KBR2", 12, 29, 0, 28, 1, 0) +MUX_CFG_7XX("F3_7XX_KBR3", 13, 1, 0, 0, 1, 0) +MUX_CFG_7XX("D2_7XX_KBR4", 13, 5, 0, 4, 1, 0) +MUX_CFG_7XX("C2_7XX_KBC0", 13, 9, 0, 8, 1, 0) +MUX_CFG_7XX("D3_7XX_KBC1", 13, 13, 0, 12, 1, 0) +MUX_CFG_7XX("E4_7XX_KBC2", 13, 17, 0, 16, 1, 0) +MUX_CFG_7XX("F4_7XX_KBC3", 13, 21, 0, 20, 1, 0) +MUX_CFG_7XX("E3_7XX_KBC4", 13, 25, 0, 24, 1, 0) + +MUX_CFG_7XX("AA17_7XX_USB_DM", 2, 21, 0, 20, 0, 0) +MUX_CFG_7XX("W16_7XX_USB_PU_EN", 2, 25, 0, 24, 0, 0) +MUX_CFG_7XX("W17_7XX_USB_VBUSI", 2, 29, 0, 28, 0, 0) }; -#define OMAP730_PINS_SZ ARRAY_SIZE(omap730_pins) +#define OMAP7XX_PINS_SZ ARRAY_SIZE(omap7xx_pins) #else -#define omap730_pins NULL -#define OMAP730_PINS_SZ 0 -#endif /* CONFIG_ARCH_OMAP730 */ - -#ifdef CONFIG_ARCH_OMAP850 -struct pin_config __initdata_or_module omap850_pins[] = { -MUX_CFG_850("E2_850_KBR0", 12, 21, 0, 20, 1, 0) -MUX_CFG_850("J7_850_KBR1", 12, 25, 0, 24, 1, 0) -MUX_CFG_850("E1_850_KBR2", 12, 29, 0, 28, 1, 0) -MUX_CFG_850("F3_850_KBR3", 13, 1, 0, 0, 1, 0) -MUX_CFG_850("D2_850_KBR4", 13, 5, 0, 4, 1, 0) -MUX_CFG_850("C2_850_KBC0", 13, 9, 0, 8, 1, 0) -MUX_CFG_850("D3_850_KBC1", 13, 13, 0, 12, 1, 0) -MUX_CFG_850("E4_850_KBC2", 13, 17, 0, 16, 1, 0) -MUX_CFG_850("F4_850_KBC3", 13, 21, 0, 20, 1, 0) -MUX_CFG_850("E3_850_KBC4", 13, 25, 0, 24, 1, 0) - -MUX_CFG_850("AA17_850_USB_DM", 2, 21, 0, 20, 0, 0) -MUX_CFG_850("W16_850_USB_PU_EN", 2, 25, 0, 24, 0, 0) -MUX_CFG_850("W17_850_USB_VBUSI", 2, 29, 0, 28, 0, 0) -}; -#endif +#define omap7xx_pins NULL +#define OMAP7XX_PINS_SZ 0 +#endif /* CONFIG_ARCH_OMAP730 || CONFIG_ARCH_OMAP850 */ #if defined(CONFIG_ARCH_OMAP15XX) || defined(CONFIG_ARCH_OMAP16XX) static struct pin_config __initdata_or_module omap1xxx_pins[] = { @@ -438,11 +419,6 @@ int __init_or_module omap1_cfg_reg(const struct pin_config *cfg) printk(" %s (0x%08x) = 0x%08x -> 0x%08x\n", cfg->pull_name, cfg->pull_reg, pull_orig, pull); } - -#ifdef CONFIG_ARCH_OMAP850 - omap_mux_register(omap850_pins, ARRAY_SIZE(omap850_pins)); -#endif - #endif #ifdef CONFIG_OMAP_MUX_ERRORS @@ -454,9 +430,9 @@ int __init_or_module omap1_cfg_reg(const struct pin_config *cfg) int __init omap1_mux_init(void) { - if (cpu_is_omap730()) { - arch_mux_cfg.pins = omap730_pins; - arch_mux_cfg.size = OMAP730_PINS_SZ; + if (cpu_is_omap7xx()) { + arch_mux_cfg.pins = omap7xx_pins; + arch_mux_cfg.size = OMAP7XX_PINS_SZ; arch_mux_cfg.cfg_reg = omap1_cfg_reg; } diff --git a/arch/arm/mach-omap1/pm.c b/arch/arm/mach-omap1/pm.c index 5218943c91c0..b1d3f9fade23 100644 --- a/arch/arm/mach-omap1/pm.c +++ b/arch/arm/mach-omap1/pm.c @@ -48,21 +48,21 @@ #include <asm/mach/time.h> #include <asm/mach/irq.h> -#include <mach/cpu.h> +#include <plat/cpu.h> #include <mach/irqs.h> -#include <mach/clock.h> -#include <mach/sram.h> -#include <mach/tc.h> -#include <mach/mux.h> -#include <mach/dma.h> -#include <mach/dmtimer.h> +#include <plat/clock.h> +#include <plat/sram.h> +#include <plat/tc.h> +#include <plat/mux.h> +#include <plat/dma.h> +#include <plat/dmtimer.h> #include "pm.h" static unsigned int arm_sleep_save[ARM_SLEEP_SAVE_SIZE]; static unsigned short dsp_sleep_save[DSP_SLEEP_SAVE_SIZE]; static unsigned short ulpd_sleep_save[ULPD_SLEEP_SAVE_SIZE]; -static unsigned int mpui730_sleep_save[MPUI730_SLEEP_SAVE_SIZE]; +static unsigned int mpui7xx_sleep_save[MPUI7XX_SLEEP_SAVE_SIZE]; static unsigned int mpui1510_sleep_save[MPUI1510_SLEEP_SAVE_SIZE]; static unsigned int mpui1610_sleep_save[MPUI1610_SLEEP_SAVE_SIZE]; @@ -183,9 +183,9 @@ static void omap_pm_wakeup_setup(void) * drivers must still separately call omap_set_gpio_wakeup() to * wake up to a GPIO interrupt. */ - if (cpu_is_omap730()) - level1_wake = OMAP_IRQ_BIT(INT_730_GPIO_BANK1) | - OMAP_IRQ_BIT(INT_730_IH2_IRQ); + if (cpu_is_omap7xx()) + level1_wake = OMAP_IRQ_BIT(INT_7XX_GPIO_BANK1) | + OMAP_IRQ_BIT(INT_7XX_IH2_IRQ); else if (cpu_is_omap15xx()) level1_wake = OMAP_IRQ_BIT(INT_GPIO_BANK1) | OMAP_IRQ_BIT(INT_1510_IH2_IRQ); @@ -195,10 +195,10 @@ static void omap_pm_wakeup_setup(void) omap_writel(~level1_wake, OMAP_IH1_MIR); - if (cpu_is_omap730()) { + if (cpu_is_omap7xx()) { omap_writel(~level2_wake, OMAP_IH2_0_MIR); - omap_writel(~(OMAP_IRQ_BIT(INT_730_WAKE_UP_REQ) | - OMAP_IRQ_BIT(INT_730_MPUIO_KEYPAD)), + omap_writel(~(OMAP_IRQ_BIT(INT_7XX_WAKE_UP_REQ) | + OMAP_IRQ_BIT(INT_7XX_MPUIO_KEYPAD)), OMAP_IH2_1_MIR); } else if (cpu_is_omap15xx()) { level2_wake |= OMAP_IRQ_BIT(INT_KEYBOARD); @@ -253,15 +253,15 @@ void omap1_pm_suspend(void) * Save interrupt, MPUI, ARM and UPLD control registers. */ - if (cpu_is_omap730()) { - MPUI730_SAVE(OMAP_IH1_MIR); - MPUI730_SAVE(OMAP_IH2_0_MIR); - MPUI730_SAVE(OMAP_IH2_1_MIR); - MPUI730_SAVE(MPUI_CTRL); - MPUI730_SAVE(MPUI_DSP_BOOT_CONFIG); - MPUI730_SAVE(MPUI_DSP_API_CONFIG); - MPUI730_SAVE(EMIFS_CONFIG); - MPUI730_SAVE(EMIFF_SDRAM_CONFIG); + if (cpu_is_omap7xx()) { + MPUI7XX_SAVE(OMAP_IH1_MIR); + MPUI7XX_SAVE(OMAP_IH2_0_MIR); + MPUI7XX_SAVE(OMAP_IH2_1_MIR); + MPUI7XX_SAVE(MPUI_CTRL); + MPUI7XX_SAVE(MPUI_DSP_BOOT_CONFIG); + MPUI7XX_SAVE(MPUI_DSP_API_CONFIG); + MPUI7XX_SAVE(EMIFS_CONFIG); + MPUI7XX_SAVE(EMIFF_SDRAM_CONFIG); } else if (cpu_is_omap15xx()) { MPUI1510_SAVE(OMAP_IH1_MIR); @@ -306,7 +306,7 @@ void omap1_pm_suspend(void) omap_writew(omap_readw(ARM_RSTCT1) & ~(1 << DSP_EN), ARM_RSTCT1); /* shut down dsp_ck */ - if (!cpu_is_omap730()) + if (!cpu_is_omap7xx()) omap_writew(omap_readw(ARM_CKCTL) & ~(1 << EN_DSPCK), ARM_CKCTL); /* temporarily enabling api_ck to access DSP registers */ @@ -383,12 +383,12 @@ void omap1_pm_suspend(void) ULPD_RESTORE(ULPD_CLOCK_CTRL); ULPD_RESTORE(ULPD_STATUS_REQ); - if (cpu_is_omap730()) { - MPUI730_RESTORE(EMIFS_CONFIG); - MPUI730_RESTORE(EMIFF_SDRAM_CONFIG); - MPUI730_RESTORE(OMAP_IH1_MIR); - MPUI730_RESTORE(OMAP_IH2_0_MIR); - MPUI730_RESTORE(OMAP_IH2_1_MIR); + if (cpu_is_omap7xx()) { + MPUI7XX_RESTORE(EMIFS_CONFIG); + MPUI7XX_RESTORE(EMIFF_SDRAM_CONFIG); + MPUI7XX_RESTORE(OMAP_IH1_MIR); + MPUI7XX_RESTORE(OMAP_IH2_0_MIR); + MPUI7XX_RESTORE(OMAP_IH2_1_MIR); } else if (cpu_is_omap15xx()) { MPUI1510_RESTORE(MPUI_CTRL); MPUI1510_RESTORE(MPUI_DSP_BOOT_CONFIG); @@ -461,13 +461,13 @@ static int omap_pm_read_proc( ULPD_SAVE(ULPD_DPLL_CTRL); ULPD_SAVE(ULPD_POWER_CTRL); - if (cpu_is_omap730()) { - MPUI730_SAVE(MPUI_CTRL); - MPUI730_SAVE(MPUI_DSP_STATUS); - MPUI730_SAVE(MPUI_DSP_BOOT_CONFIG); - MPUI730_SAVE(MPUI_DSP_API_CONFIG); - MPUI730_SAVE(EMIFF_SDRAM_CONFIG); - MPUI730_SAVE(EMIFS_CONFIG); + if (cpu_is_omap7xx()) { + MPUI7XX_SAVE(MPUI_CTRL); + MPUI7XX_SAVE(MPUI_DSP_STATUS); + MPUI7XX_SAVE(MPUI_DSP_BOOT_CONFIG); + MPUI7XX_SAVE(MPUI_DSP_API_CONFIG); + MPUI7XX_SAVE(EMIFF_SDRAM_CONFIG); + MPUI7XX_SAVE(EMIFS_CONFIG); } else if (cpu_is_omap15xx()) { MPUI1510_SAVE(MPUI_CTRL); MPUI1510_SAVE(MPUI_DSP_STATUS); @@ -517,20 +517,20 @@ static int omap_pm_read_proc( ULPD_SHOW(ULPD_STATUS_REQ), ULPD_SHOW(ULPD_POWER_CTRL)); - if (cpu_is_omap730()) { + if (cpu_is_omap7xx()) { my_buffer_offset += sprintf(my_base + my_buffer_offset, - "MPUI730_CTRL_REG 0x%-8x \n" - "MPUI730_DSP_STATUS_REG: 0x%-8x \n" - "MPUI730_DSP_BOOT_CONFIG_REG: 0x%-8x \n" - "MPUI730_DSP_API_CONFIG_REG: 0x%-8x \n" - "MPUI730_SDRAM_CONFIG_REG: 0x%-8x \n" - "MPUI730_EMIFS_CONFIG_REG: 0x%-8x \n", - MPUI730_SHOW(MPUI_CTRL), - MPUI730_SHOW(MPUI_DSP_STATUS), - MPUI730_SHOW(MPUI_DSP_BOOT_CONFIG), - MPUI730_SHOW(MPUI_DSP_API_CONFIG), - MPUI730_SHOW(EMIFF_SDRAM_CONFIG), - MPUI730_SHOW(EMIFS_CONFIG)); + "MPUI7XX_CTRL_REG 0x%-8x \n" + "MPUI7XX_DSP_STATUS_REG: 0x%-8x \n" + "MPUI7XX_DSP_BOOT_CONFIG_REG: 0x%-8x \n" + "MPUI7XX_DSP_API_CONFIG_REG: 0x%-8x \n" + "MPUI7XX_SDRAM_CONFIG_REG: 0x%-8x \n" + "MPUI7XX_EMIFS_CONFIG_REG: 0x%-8x \n", + MPUI7XX_SHOW(MPUI_CTRL), + MPUI7XX_SHOW(MPUI_DSP_STATUS), + MPUI7XX_SHOW(MPUI_DSP_BOOT_CONFIG), + MPUI7XX_SHOW(MPUI_DSP_API_CONFIG), + MPUI7XX_SHOW(EMIFF_SDRAM_CONFIG), + MPUI7XX_SHOW(EMIFS_CONFIG)); } else if (cpu_is_omap15xx()) { my_buffer_offset += sprintf(my_base + my_buffer_offset, "MPUI1510_CTRL_REG 0x%-8x \n" @@ -668,9 +668,9 @@ static int __init omap_pm_init(void) * These routines need to be in SRAM as that's the only * memory the MPU can see when it wakes up. */ - if (cpu_is_omap730()) { - omap_sram_suspend = omap_sram_push(omap730_cpu_suspend, - omap730_cpu_suspend_sz); + if (cpu_is_omap7xx()) { + omap_sram_suspend = omap_sram_push(omap7xx_cpu_suspend, + omap7xx_cpu_suspend_sz); } else if (cpu_is_omap15xx()) { omap_sram_suspend = omap_sram_push(omap1510_cpu_suspend, omap1510_cpu_suspend_sz); @@ -686,8 +686,8 @@ static int __init omap_pm_init(void) pm_idle = omap1_pm_idle; - if (cpu_is_omap730()) - setup_irq(INT_730_WAKE_UP_REQ, &omap_wakeup_irq); + if (cpu_is_omap7xx()) + setup_irq(INT_7XX_WAKE_UP_REQ, &omap_wakeup_irq); else if (cpu_is_omap16xx()) setup_irq(INT_1610_WAKE_UP_REQ, &omap_wakeup_irq); @@ -700,8 +700,8 @@ static int __init omap_pm_init(void) omap_writew(ULPD_POWER_CTRL_REG_VAL, ULPD_POWER_CTRL); /* Configure IDLECT3 */ - if (cpu_is_omap730()) - omap_writel(OMAP730_IDLECT3_VAL, OMAP730_IDLECT3); + if (cpu_is_omap7xx()) + omap_writel(OMAP7XX_IDLECT3_VAL, OMAP7XX_IDLECT3); else if (cpu_is_omap16xx()) omap_writel(OMAP1610_IDLECT3_VAL, OMAP1610_IDLECT3); diff --git a/arch/arm/mach-omap1/pm.h b/arch/arm/mach-omap1/pm.h index c4f05bdcf8a6..56a647986ae9 100644 --- a/arch/arm/mach-omap1/pm.h +++ b/arch/arm/mach-omap1/pm.h @@ -98,13 +98,14 @@ #define OMAP1610_IDLECT3 0xfffece24 #define OMAP1610_IDLE_LOOP_REQUEST 0x0400 -#define OMAP730_IDLECT1_SLEEP_VAL 0x16c7 -#define OMAP730_IDLECT2_SLEEP_VAL 0x09c7 -#define OMAP730_IDLECT3_VAL 0x3f -#define OMAP730_IDLECT3 0xfffece24 -#define OMAP730_IDLE_LOOP_REQUEST 0x0C00 +#define OMAP7XX_IDLECT1_SLEEP_VAL 0x16c7 +#define OMAP7XX_IDLECT2_SLEEP_VAL 0x09c7 +#define OMAP7XX_IDLECT3_VAL 0x3f +#define OMAP7XX_IDLECT3 0xfffece24 +#define OMAP7XX_IDLE_LOOP_REQUEST 0x0C00 #if !defined(CONFIG_ARCH_OMAP730) && \ + !defined(CONFIG_ARCH_OMAP850) && \ !defined(CONFIG_ARCH_OMAP15XX) && \ !defined(CONFIG_ARCH_OMAP16XX) #warning "Power management for this processor not implemented yet" @@ -122,17 +123,17 @@ extern void allow_idle_sleep(void); extern void omap1_pm_idle(void); extern void omap1_pm_suspend(void); -extern void omap730_cpu_suspend(unsigned short, unsigned short); +extern void omap7xx_cpu_suspend(unsigned short, unsigned short); extern void omap1510_cpu_suspend(unsigned short, unsigned short); extern void omap1610_cpu_suspend(unsigned short, unsigned short); -extern void omap730_idle_loop_suspend(void); +extern void omap7xx_idle_loop_suspend(void); extern void omap1510_idle_loop_suspend(void); extern void omap1610_idle_loop_suspend(void); -extern unsigned int omap730_cpu_suspend_sz; +extern unsigned int omap7xx_cpu_suspend_sz; extern unsigned int omap1510_cpu_suspend_sz; extern unsigned int omap1610_cpu_suspend_sz; -extern unsigned int omap730_idle_loop_suspend_sz; +extern unsigned int omap7xx_idle_loop_suspend_sz; extern unsigned int omap1510_idle_loop_suspend_sz; extern unsigned int omap1610_idle_loop_suspend_sz; @@ -155,9 +156,9 @@ extern void omap_serial_wake_trigger(int enable); #define ULPD_RESTORE(x) omap_writew((ulpd_sleep_save[ULPD_SLEEP_SAVE_##x]), (x)) #define ULPD_SHOW(x) ulpd_sleep_save[ULPD_SLEEP_SAVE_##x] -#define MPUI730_SAVE(x) mpui730_sleep_save[MPUI730_SLEEP_SAVE_##x] = omap_readl(x) -#define MPUI730_RESTORE(x) omap_writel((mpui730_sleep_save[MPUI730_SLEEP_SAVE_##x]), (x)) -#define MPUI730_SHOW(x) mpui730_sleep_save[MPUI730_SLEEP_SAVE_##x] +#define MPUI7XX_SAVE(x) mpui7xx_sleep_save[MPUI7XX_SLEEP_SAVE_##x] = omap_readl(x) +#define MPUI7XX_RESTORE(x) omap_writel((mpui7xx_sleep_save[MPUI7XX_SLEEP_SAVE_##x]), (x)) +#define MPUI7XX_SHOW(x) mpui7xx_sleep_save[MPUI7XX_SLEEP_SAVE_##x] #define MPUI1510_SAVE(x) mpui1510_sleep_save[MPUI1510_SLEEP_SAVE_##x] = omap_readl(x) #define MPUI1510_RESTORE(x) omap_writel((mpui1510_sleep_save[MPUI1510_SLEEP_SAVE_##x]), (x)) @@ -232,24 +233,24 @@ enum mpui1510_save_state { #endif }; -enum mpui730_save_state { - MPUI730_SLEEP_SAVE_START = 0, +enum mpui7xx_save_state { + MPUI7XX_SLEEP_SAVE_START = 0, /* * MPUI registers 32 bits */ - MPUI730_SLEEP_SAVE_MPUI_CTRL, - MPUI730_SLEEP_SAVE_MPUI_DSP_BOOT_CONFIG, - MPUI730_SLEEP_SAVE_MPUI_DSP_API_CONFIG, - MPUI730_SLEEP_SAVE_MPUI_DSP_STATUS, - MPUI730_SLEEP_SAVE_EMIFF_SDRAM_CONFIG, - MPUI730_SLEEP_SAVE_EMIFS_CONFIG, - MPUI730_SLEEP_SAVE_OMAP_IH1_MIR, - MPUI730_SLEEP_SAVE_OMAP_IH2_0_MIR, - MPUI730_SLEEP_SAVE_OMAP_IH2_1_MIR, -#if defined(CONFIG_ARCH_OMAP730) - MPUI730_SLEEP_SAVE_SIZE + MPUI7XX_SLEEP_SAVE_MPUI_CTRL, + MPUI7XX_SLEEP_SAVE_MPUI_DSP_BOOT_CONFIG, + MPUI7XX_SLEEP_SAVE_MPUI_DSP_API_CONFIG, + MPUI7XX_SLEEP_SAVE_MPUI_DSP_STATUS, + MPUI7XX_SLEEP_SAVE_EMIFF_SDRAM_CONFIG, + MPUI7XX_SLEEP_SAVE_EMIFS_CONFIG, + MPUI7XX_SLEEP_SAVE_OMAP_IH1_MIR, + MPUI7XX_SLEEP_SAVE_OMAP_IH2_0_MIR, + MPUI7XX_SLEEP_SAVE_OMAP_IH2_1_MIR, +#if defined(CONFIG_ARCH_OMAP730) || defined(CONFIG_ARCH_OMAP850) + MPUI7XX_SLEEP_SAVE_SIZE #else - MPUI730_SLEEP_SAVE_SIZE = 0 + MPUI7XX_SLEEP_SAVE_SIZE = 0 #endif }; diff --git a/arch/arm/mach-omap1/serial.c b/arch/arm/mach-omap1/serial.c index d23979bc0fd5..5ebf0946c76a 100644 --- a/arch/arm/mach-omap1/serial.c +++ b/arch/arm/mach-omap1/serial.c @@ -22,10 +22,10 @@ #include <asm/mach-types.h> -#include <mach/board.h> -#include <mach/mux.h> +#include <plat/board.h> +#include <plat/mux.h> #include <mach/gpio.h> -#include <mach/fpga.h> +#include <plat/fpga.h> static struct clk * uart1_ck; static struct clk * uart2_ck; @@ -64,7 +64,6 @@ static void __init omap_serial_reset(struct plat_serial8250_port *p) static struct plat_serial8250_port serial_platform_data[] = { { - .membase = OMAP1_IO_ADDRESS(OMAP_UART1_BASE), .mapbase = OMAP_UART1_BASE, .irq = INT_UART1, .flags = UPF_BOOT_AUTOCONF, @@ -73,7 +72,6 @@ static struct plat_serial8250_port serial_platform_data[] = { .uartclk = OMAP16XX_BASE_BAUD * 16, }, { - .membase = OMAP1_IO_ADDRESS(OMAP_UART2_BASE), .mapbase = OMAP_UART2_BASE, .irq = INT_UART2, .flags = UPF_BOOT_AUTOCONF, @@ -82,7 +80,6 @@ static struct plat_serial8250_port serial_platform_data[] = { .uartclk = OMAP16XX_BASE_BAUD * 16, }, { - .membase = OMAP1_IO_ADDRESS(OMAP_UART3_BASE), .mapbase = OMAP_UART3_BASE, .irq = INT_UART3, .flags = UPF_BOOT_AUTOCONF, @@ -110,18 +107,11 @@ void __init omap_serial_init(void) { int i; - if (cpu_is_omap730()) { + if (cpu_is_omap7xx()) { serial_platform_data[0].regshift = 0; serial_platform_data[1].regshift = 0; - serial_platform_data[0].irq = INT_730_UART_MODEM_1; - serial_platform_data[1].irq = INT_730_UART_MODEM_IRDA_2; - } - - if (cpu_is_omap850()) { - serial_platform_data[0].regshift = 0; - serial_platform_data[1].regshift = 0; - serial_platform_data[0].irq = INT_850_UART_MODEM_1; - serial_platform_data[1].irq = INT_850_UART_MODEM_IRDA_2; + serial_platform_data[0].irq = INT_7XX_UART_MODEM_1; + serial_platform_data[1].irq = INT_7XX_UART_MODEM_IRDA_2; } if (cpu_is_omap15xx()) { @@ -131,6 +121,14 @@ void __init omap_serial_init(void) } for (i = 0; i < OMAP_MAX_NR_PORTS; i++) { + + /* Static mapping, never released */ + serial_platform_data[i].membase = + ioremap(serial_platform_data[i].mapbase, SZ_2K); + if (!serial_platform_data[i].membase) { + printk(KERN_ERR "Could not ioremap uart%i\n", i); + continue; + } switch (i) { case 0: uart1_ck = clk_get(NULL, "uart1_ck"); diff --git a/arch/arm/mach-omap1/sleep.S b/arch/arm/mach-omap1/sleep.S index 22e8568339b0..ef771ce8b030 100644 --- a/arch/arm/mach-omap1/sleep.S +++ b/arch/arm/mach-omap1/sleep.S @@ -1,7 +1,7 @@ /* * linux/arch/arm/mach-omap1/sleep.S * - * Low-level OMAP730/1510/1610 sleep/wakeUp support + * Low-level OMAP7XX/1510/1610 sleep/wakeUp support * * Initial SA1110 code: * Copyright (c) 2001 Cliff Brake <cbrake@accelent.com> @@ -57,8 +57,8 @@ * */ -#if defined(CONFIG_ARCH_OMAP730) -ENTRY(omap730_cpu_suspend) +#if defined(CONFIG_ARCH_OMAP730) || defined(CONFIG_ARCH_OMAP850) +ENTRY(omap7xx_cpu_suspend) @ save registers on stack stmfd sp!, {r0 - r12, lr} @@ -91,13 +91,13 @@ ENTRY(omap730_cpu_suspend) @ turn off clock domains @ do not disable PERCK (0x04) - mov r5, #OMAP730_IDLECT2_SLEEP_VAL & 0xff - orr r5, r5, #OMAP730_IDLECT2_SLEEP_VAL & 0xff00 + mov r5, #OMAP7XX_IDLECT2_SLEEP_VAL & 0xff + orr r5, r5, #OMAP7XX_IDLECT2_SLEEP_VAL & 0xff00 strh r5, [r4, #ARM_IDLECT2_ASM_OFFSET & 0xff] @ request ARM idle - mov r3, #OMAP730_IDLECT1_SLEEP_VAL & 0xff - orr r3, r3, #OMAP730_IDLECT1_SLEEP_VAL & 0xff00 + mov r3, #OMAP7XX_IDLECT1_SLEEP_VAL & 0xff + orr r3, r3, #OMAP7XX_IDLECT1_SLEEP_VAL & 0xff00 strh r3, [r4, #ARM_IDLECT1_ASM_OFFSET & 0xff] @ disable instruction cache @@ -113,7 +113,7 @@ ENTRY(omap730_cpu_suspend) mov r2, #0 mcr p15, 0, r2, c7, c0, 4 @ wait for interrupt /* - * omap730_cpu_suspend()'s resume point. + * omap7xx_cpu_suspend()'s resume point. * * It will just start executing here, so we'll restore stuff from the * stack. @@ -132,9 +132,9 @@ ENTRY(omap730_cpu_suspend) @ restore regs and return ldmfd sp!, {r0 - r12, pc} -ENTRY(omap730_cpu_suspend_sz) - .word . - omap730_cpu_suspend -#endif /* CONFIG_ARCH_OMAP730 */ +ENTRY(omap7xx_cpu_suspend_sz) + .word . - omap7xx_cpu_suspend +#endif /* CONFIG_ARCH_OMAP730 || CONFIG_ARCH_OMAP850 */ #ifdef CONFIG_ARCH_OMAP15XX ENTRY(omap1510_cpu_suspend) diff --git a/arch/arm/mach-omap1/timer32k.c b/arch/arm/mach-omap1/timer32k.c index fd3f7396e162..9ad118563f7d 100644 --- a/arch/arm/mach-omap1/timer32k.c +++ b/arch/arm/mach-omap1/timer32k.c @@ -52,7 +52,7 @@ #include <asm/irq.h> #include <asm/mach/irq.h> #include <asm/mach/time.h> -#include <mach/dmtimer.h> +#include <plat/dmtimer.h> struct sys_timer omap_timer; diff --git a/arch/arm/mach-omap2/board-2430sdp.c b/arch/arm/mach-omap2/board-2430sdp.c index 42217b32f835..db9374bc528b 100644 --- a/arch/arm/mach-omap2/board-2430sdp.c +++ b/arch/arm/mach-omap2/board-2430sdp.c @@ -31,12 +31,12 @@ #include <asm/mach/flash.h> #include <mach/gpio.h> -#include <mach/mux.h> -#include <mach/board.h> -#include <mach/common.h> -#include <mach/gpmc.h> -#include <mach/usb.h> -#include <mach/gpmc-smc91x.h> +#include <plat/mux.h> +#include <plat/board.h> +#include <plat/common.h> +#include <plat/gpmc.h> +#include <plat/usb.h> +#include <plat/gpmc-smc91x.h> #include "mmc-twl4030.h" @@ -221,7 +221,7 @@ static void __init omap_2430sdp_map_io(void) MACHINE_START(OMAP_2430SDP, "OMAP2430 sdp2430 board") /* Maintainer: Syed Khasim - Texas Instruments Inc */ .phys_io = 0x48000000, - .io_pg_offst = ((0xd8000000) >> 18) & 0xfffc, + .io_pg_offst = ((0xfa000000) >> 18) & 0xfffc, .boot_params = 0x80000100, .map_io = omap_2430sdp_map_io, .init_irq = omap_2430sdp_init_irq, diff --git a/arch/arm/mach-omap2/board-3430sdp.c b/arch/arm/mach-omap2/board-3430sdp.c index 0acb5560229c..a2abac98c569 100644 --- a/arch/arm/mach-omap2/board-3430sdp.c +++ b/arch/arm/mach-omap2/board-3430sdp.c @@ -30,16 +30,16 @@ #include <asm/mach/arch.h> #include <asm/mach/map.h> -#include <mach/mcspi.h> -#include <mach/mux.h> -#include <mach/board.h> -#include <mach/usb.h> -#include <mach/common.h> -#include <mach/dma.h> -#include <mach/gpmc.h> +#include <plat/mcspi.h> +#include <plat/mux.h> +#include <plat/board.h> +#include <plat/usb.h> +#include <plat/common.h> +#include <plat/dma.h> +#include <plat/gpmc.h> -#include <mach/control.h> -#include <mach/gpmc-smc91x.h> +#include <plat/control.h> +#include <plat/gpmc-smc91x.h> #include "sdram-qimonda-hyb18m512160af-6.h" #include "mmc-twl4030.h" @@ -511,7 +511,7 @@ static void __init omap_3430sdp_map_io(void) MACHINE_START(OMAP_3430SDP, "OMAP3430 3430SDP board") /* Maintainer: Syed Khasim - Texas Instruments Inc */ .phys_io = 0x48000000, - .io_pg_offst = ((0xd8000000) >> 18) & 0xfffc, + .io_pg_offst = ((0xfa000000) >> 18) & 0xfffc, .boot_params = 0x80000100, .map_io = omap_3430sdp_map_io, .init_irq = omap_3430sdp_init_irq, diff --git a/arch/arm/mach-omap2/board-4430sdp.c b/arch/arm/mach-omap2/board-4430sdp.c index 609a5a4a7e29..0c6be6b4a7e2 100644 --- a/arch/arm/mach-omap2/board-4430sdp.c +++ b/arch/arm/mach-omap2/board-4430sdp.c @@ -23,10 +23,10 @@ #include <asm/mach/arch.h> #include <asm/mach/map.h> -#include <mach/board.h> -#include <mach/common.h> -#include <mach/control.h> -#include <mach/timer-gp.h> +#include <plat/board.h> +#include <plat/common.h> +#include <plat/control.h> +#include <plat/timer-gp.h> #include <asm/hardware/gic.h> static struct platform_device sdp4430_lcd_device = { @@ -52,8 +52,17 @@ static struct omap_board_config_kernel sdp4430_config[] __initdata = { static void __init gic_init_irq(void) { - gic_dist_init(0, OMAP2_IO_ADDRESS(OMAP44XX_GIC_DIST_BASE), 29); - gic_cpu_init(0, OMAP2_IO_ADDRESS(OMAP44XX_GIC_CPU_BASE)); + void __iomem *base; + + /* Static mapping, never released */ + base = ioremap(OMAP44XX_GIC_DIST_BASE, SZ_4K); + BUG_ON(!base); + gic_dist_init(0, base, 29); + + /* Static mapping, never released */ + gic_cpu_base_addr = ioremap(OMAP44XX_GIC_CPU_BASE, SZ_512); + BUG_ON(!gic_cpu_base_addr); + gic_cpu_init(0, gic_cpu_base_addr); } static void __init omap_4430sdp_init_irq(void) @@ -84,7 +93,7 @@ static void __init omap_4430sdp_map_io(void) MACHINE_START(OMAP_4430SDP, "OMAP4430 4430SDP board") /* Maintainer: Santosh Shilimkar - Texas Instruments Inc */ .phys_io = 0x48000000, - .io_pg_offst = ((0xd8000000) >> 18) & 0xfffc, + .io_pg_offst = ((0xfa000000) >> 18) & 0xfffc, .boot_params = 0x80000100, .map_io = omap_4430sdp_map_io, .init_irq = omap_4430sdp_init_irq, diff --git a/arch/arm/mach-omap2/board-apollon.c b/arch/arm/mach-omap2/board-apollon.c index a1132288c701..8a2ce77a02ec 100644 --- a/arch/arm/mach-omap2/board-apollon.c +++ b/arch/arm/mach-omap2/board-apollon.c @@ -33,13 +33,13 @@ #include <asm/mach/flash.h> #include <mach/gpio.h> -#include <mach/led.h> -#include <mach/mux.h> -#include <mach/usb.h> -#include <mach/board.h> -#include <mach/common.h> -#include <mach/gpmc.h> -#include <mach/control.h> +#include <plat/led.h> +#include <plat/mux.h> +#include <plat/usb.h> +#include <plat/board.h> +#include <plat/common.h> +#include <plat/gpmc.h> +#include <plat/control.h> /* LED & Switch macros */ #define LED0_GPIO13 13 @@ -333,7 +333,7 @@ static void __init omap_apollon_map_io(void) MACHINE_START(OMAP_APOLLON, "OMAP24xx Apollon") /* Maintainer: Kyungmin Park <kyungmin.park@samsung.com> */ .phys_io = 0x48000000, - .io_pg_offst = ((0xd8000000) >> 18) & 0xfffc, + .io_pg_offst = ((0xfa000000) >> 18) & 0xfffc, .boot_params = 0x80000100, .map_io = omap_apollon_map_io, .init_irq = omap_apollon_init_irq, diff --git a/arch/arm/mach-omap2/board-generic.c b/arch/arm/mach-omap2/board-generic.c index 2e09a1c444cb..7e6e6ca88be5 100644 --- a/arch/arm/mach-omap2/board-generic.c +++ b/arch/arm/mach-omap2/board-generic.c @@ -26,10 +26,10 @@ #include <asm/mach/map.h> #include <mach/gpio.h> -#include <mach/mux.h> -#include <mach/usb.h> -#include <mach/board.h> -#include <mach/common.h> +#include <plat/mux.h> +#include <plat/usb.h> +#include <plat/board.h> +#include <plat/common.h> static struct omap_board_config_kernel generic_config[] = { }; @@ -56,7 +56,7 @@ static void __init omap_generic_map_io(void) MACHINE_START(OMAP_GENERIC, "Generic OMAP24xx") /* Maintainer: Paul Mundt <paul.mundt@nokia.com> */ .phys_io = 0x48000000, - .io_pg_offst = ((0xd8000000) >> 18) & 0xfffc, + .io_pg_offst = ((0xfa000000) >> 18) & 0xfffc, .boot_params = 0x80000100, .map_io = omap_generic_map_io, .init_irq = omap_generic_init_irq, diff --git a/arch/arm/mach-omap2/board-h4.c b/arch/arm/mach-omap2/board-h4.c index eaa02d012c5c..cfb7f1257d20 100644 --- a/arch/arm/mach-omap2/board-h4.c +++ b/arch/arm/mach-omap2/board-h4.c @@ -31,16 +31,16 @@ #include <asm/mach/map.h> #include <asm/mach/flash.h> -#include <mach/control.h> +#include <plat/control.h> #include <mach/gpio.h> -#include <mach/mux.h> -#include <mach/usb.h> -#include <mach/board.h> -#include <mach/common.h> -#include <mach/keypad.h> -#include <mach/menelaus.h> -#include <mach/dma.h> -#include <mach/gpmc.h> +#include <plat/mux.h> +#include <plat/usb.h> +#include <plat/board.h> +#include <plat/common.h> +#include <plat/keypad.h> +#include <plat/menelaus.h> +#include <plat/dma.h> +#include <plat/gpmc.h> #define H4_FLASH_CS 0 #define H4_SMC91X_CS 1 @@ -376,7 +376,7 @@ static void __init omap_h4_map_io(void) MACHINE_START(OMAP_H4, "OMAP2420 H4 board") /* Maintainer: Paul Mundt <paul.mundt@nokia.com> */ .phys_io = 0x48000000, - .io_pg_offst = ((0xd8000000) >> 18) & 0xfffc, + .io_pg_offst = ((0xfa000000) >> 18) & 0xfffc, .boot_params = 0x80000100, .map_io = omap_h4_map_io, .init_irq = omap_h4_init_irq, diff --git a/arch/arm/mach-omap2/board-ldp.c b/arch/arm/mach-omap2/board-ldp.c index d57ec2f4d0a9..c062238fe881 100644 --- a/arch/arm/mach-omap2/board-ldp.c +++ b/arch/arm/mach-omap2/board-ldp.c @@ -33,15 +33,15 @@ #include <asm/mach/arch.h> #include <asm/mach/map.h> -#include <mach/mcspi.h> +#include <plat/mcspi.h> #include <mach/gpio.h> -#include <mach/board.h> -#include <mach/common.h> -#include <mach/gpmc.h> +#include <plat/board.h> +#include <plat/common.h> +#include <plat/gpmc.h> #include <asm/delay.h> -#include <mach/control.h> -#include <mach/usb.h> +#include <plat/control.h> +#include <plat/usb.h> #include "mmc-twl4030.h" @@ -399,7 +399,7 @@ static void __init omap_ldp_map_io(void) MACHINE_START(OMAP_LDP, "OMAP LDP board") .phys_io = 0x48000000, - .io_pg_offst = ((0xd8000000) >> 18) & 0xfffc, + .io_pg_offst = ((0xfa000000) >> 18) & 0xfffc, .boot_params = 0x80000100, .map_io = omap_ldp_map_io, .init_irq = omap_ldp_init_irq, diff --git a/arch/arm/mach-omap2/board-n8x0.c b/arch/arm/mach-omap2/board-n8x0.c index 8341632d260b..764ab1ed576d 100644 --- a/arch/arm/mach-omap2/board-n8x0.c +++ b/arch/arm/mach-omap2/board-n8x0.c @@ -23,12 +23,12 @@ #include <asm/mach/arch.h> #include <asm/mach-types.h> -#include <mach/board.h> -#include <mach/common.h> +#include <plat/board.h> +#include <plat/common.h> #include <mach/irqs.h> -#include <mach/mcspi.h> -#include <mach/onenand.h> -#include <mach/serial.h> +#include <plat/mcspi.h> +#include <plat/onenand.h> +#include <plat/serial.h> static struct omap2_mcspi_device_config p54spi_mcspi_config = { .turbo_mode = 0, @@ -121,7 +121,7 @@ static void __init n8x0_init_machine(void) MACHINE_START(NOKIA_N800, "Nokia N800") .phys_io = 0x48000000, - .io_pg_offst = ((0xd8000000) >> 18) & 0xfffc, + .io_pg_offst = ((0xfa000000) >> 18) & 0xfffc, .boot_params = 0x80000100, .map_io = n8x0_map_io, .init_irq = n8x0_init_irq, @@ -131,7 +131,7 @@ MACHINE_END MACHINE_START(NOKIA_N810, "Nokia N810") .phys_io = 0x48000000, - .io_pg_offst = ((0xd8000000) >> 18) & 0xfffc, + .io_pg_offst = ((0xfa000000) >> 18) & 0xfffc, .boot_params = 0x80000100, .map_io = n8x0_map_io, .init_irq = n8x0_init_irq, @@ -141,7 +141,7 @@ MACHINE_END MACHINE_START(NOKIA_N810_WIMAX, "Nokia N810 WiMAX") .phys_io = 0x48000000, - .io_pg_offst = ((0xd8000000) >> 18) & 0xfffc, + .io_pg_offst = ((0xfa000000) >> 18) & 0xfffc, .boot_params = 0x80000100, .map_io = n8x0_map_io, .init_irq = n8x0_init_irq, diff --git a/arch/arm/mach-omap2/board-omap3beagle.c b/arch/arm/mach-omap2/board-omap3beagle.c index 70df6b4dbcd4..71a3528b40ce 100644 --- a/arch/arm/mach-omap2/board-omap3beagle.c +++ b/arch/arm/mach-omap2/board-omap3beagle.c @@ -37,13 +37,13 @@ #include <asm/mach/map.h> #include <asm/mach/flash.h> -#include <mach/board.h> -#include <mach/common.h> -#include <mach/gpmc.h> -#include <mach/nand.h> -#include <mach/mux.h> -#include <mach/usb.h> -#include <mach/timer-gp.h> +#include <plat/board.h> +#include <plat/common.h> +#include <plat/gpmc.h> +#include <plat/nand.h> +#include <plat/mux.h> +#include <plat/usb.h> +#include <plat/timer-gp.h> #include "mmc-twl4030.h" @@ -429,7 +429,7 @@ static void __init omap3_beagle_map_io(void) MACHINE_START(OMAP3_BEAGLE, "OMAP3 Beagle Board") /* Maintainer: Syed Mohammed Khasim - http://beagleboard.org */ .phys_io = 0x48000000, - .io_pg_offst = ((0xd8000000) >> 18) & 0xfffc, + .io_pg_offst = ((0xfa000000) >> 18) & 0xfffc, .boot_params = 0x80000100, .map_io = omap3_beagle_map_io, .init_irq = omap3_beagle_init_irq, diff --git a/arch/arm/mach-omap2/board-omap3evm.c b/arch/arm/mach-omap2/board-omap3evm.c index 4c4d7f8dbd72..522ff6288c6f 100644 --- a/arch/arm/mach-omap2/board-omap3evm.c +++ b/arch/arm/mach-omap2/board-omap3evm.c @@ -33,11 +33,11 @@ #include <asm/mach/arch.h> #include <asm/mach/map.h> -#include <mach/board.h> -#include <mach/mux.h> -#include <mach/usb.h> -#include <mach/common.h> -#include <mach/mcspi.h> +#include <plat/board.h> +#include <plat/mux.h> +#include <plat/usb.h> +#include <plat/common.h> +#include <plat/mcspi.h> #include "sdram-micron-mt46h32m32lf-6.h" #include "mmc-twl4030.h" @@ -324,7 +324,7 @@ static void __init omap3_evm_map_io(void) MACHINE_START(OMAP3EVM, "OMAP3 EVM") /* Maintainer: Syed Mohammed Khasim - Texas Instruments */ .phys_io = 0x48000000, - .io_pg_offst = ((0xd8000000) >> 18) & 0xfffc, + .io_pg_offst = ((0xfa000000) >> 18) & 0xfffc, .boot_params = 0x80000100, .map_io = omap3_evm_map_io, .init_irq = omap3_evm_init_irq, diff --git a/arch/arm/mach-omap2/board-omap3pandora.c b/arch/arm/mach-omap2/board-omap3pandora.c index 5326e0d61597..5a38494bf066 100644 --- a/arch/arm/mach-omap2/board-omap3pandora.c +++ b/arch/arm/mach-omap2/board-omap3pandora.c @@ -34,13 +34,13 @@ #include <asm/mach/arch.h> #include <asm/mach/map.h> -#include <mach/board.h> -#include <mach/common.h> +#include <plat/board.h> +#include <plat/common.h> #include <mach/gpio.h> #include <mach/hardware.h> -#include <mach/mcspi.h> -#include <mach/usb.h> -#include <mach/mux.h> +#include <plat/mcspi.h> +#include <plat/usb.h> +#include <plat/mux.h> #include "sdram-micron-mt46h32m32lf-6.h" #include "mmc-twl4030.h" @@ -412,7 +412,7 @@ static void __init omap3pandora_map_io(void) MACHINE_START(OMAP3_PANDORA, "Pandora Handheld Console") .phys_io = 0x48000000, - .io_pg_offst = ((0xd8000000) >> 18) & 0xfffc, + .io_pg_offst = ((0xfa000000) >> 18) & 0xfffc, .boot_params = 0x80000100, .map_io = omap3pandora_map_io, .init_irq = omap3pandora_init_irq, diff --git a/arch/arm/mach-omap2/board-overo.c b/arch/arm/mach-omap2/board-overo.c index 9917d2fddc2f..461522c1bced 100644 --- a/arch/arm/mach-omap2/board-overo.c +++ b/arch/arm/mach-omap2/board-overo.c @@ -38,14 +38,14 @@ #include <asm/mach/flash.h> #include <asm/mach/map.h> -#include <mach/board.h> -#include <mach/common.h> +#include <plat/board.h> +#include <plat/common.h> #include <mach/gpio.h> -#include <mach/gpmc.h> +#include <plat/gpmc.h> #include <mach/hardware.h> -#include <mach/nand.h> -#include <mach/mux.h> -#include <mach/usb.h> +#include <plat/nand.h> +#include <plat/mux.h> +#include <plat/usb.h> #include "sdram-micron-mt46h32m32lf-6.h" #include "mmc-twl4030.h" @@ -67,7 +67,7 @@ #if defined(CONFIG_TOUCHSCREEN_ADS7846) || \ defined(CONFIG_TOUCHSCREEN_ADS7846_MODULE) -#include <mach/mcspi.h> +#include <plat/mcspi.h> #include <linux/spi/spi.h> #include <linux/spi/ads7846.h> @@ -451,7 +451,7 @@ static void __init overo_map_io(void) MACHINE_START(OVERO, "Gumstix Overo") .phys_io = 0x48000000, - .io_pg_offst = ((0xd8000000) >> 18) & 0xfffc, + .io_pg_offst = ((0xfa000000) >> 18) & 0xfffc, .boot_params = 0x80000100, .map_io = overo_map_io, .init_irq = overo_init_irq, diff --git a/arch/arm/mach-omap2/board-rx51-peripherals.c b/arch/arm/mach-omap2/board-rx51-peripherals.c index e34d96a825e3..cf4583a5d284 100644 --- a/arch/arm/mach-omap2/board-rx51-peripherals.c +++ b/arch/arm/mach-omap2/board-rx51-peripherals.c @@ -22,14 +22,14 @@ #include <linux/gpio.h> #include <linux/mmc/host.h> -#include <mach/mcspi.h> -#include <mach/mux.h> -#include <mach/board.h> -#include <mach/common.h> -#include <mach/dma.h> -#include <mach/gpmc.h> -#include <mach/onenand.h> -#include <mach/gpmc-smc91x.h> +#include <plat/mcspi.h> +#include <plat/mux.h> +#include <plat/board.h> +#include <plat/common.h> +#include <plat/dma.h> +#include <plat/gpmc.h> +#include <plat/onenand.h> +#include <plat/gpmc-smc91x.h> #include "mmc-twl4030.h" diff --git a/arch/arm/mach-omap2/board-rx51.c b/arch/arm/mach-omap2/board-rx51.c index 78869a9a1cc2..f1e7e5bbf985 100644 --- a/arch/arm/mach-omap2/board-rx51.c +++ b/arch/arm/mach-omap2/board-rx51.c @@ -22,13 +22,13 @@ #include <asm/mach/arch.h> #include <asm/mach/map.h> -#include <mach/mcspi.h> -#include <mach/mux.h> -#include <mach/board.h> -#include <mach/common.h> -#include <mach/dma.h> -#include <mach/gpmc.h> -#include <mach/usb.h> +#include <plat/mcspi.h> +#include <plat/mux.h> +#include <plat/board.h> +#include <plat/common.h> +#include <plat/dma.h> +#include <plat/gpmc.h> +#include <plat/usb.h> static struct omap_lcd_config rx51_lcd_config = { .ctrl_name = "internal", @@ -84,7 +84,7 @@ static void __init rx51_map_io(void) MACHINE_START(NOKIA_RX51, "Nokia RX-51 board") /* Maintainer: Lauri Leukkunen <lauri.leukkunen@nokia.com> */ .phys_io = 0x48000000, - .io_pg_offst = ((0xd8000000) >> 18) & 0xfffc, + .io_pg_offst = ((0xfa000000) >> 18) & 0xfffc, .boot_params = 0x80000100, .map_io = rx51_map_io, .init_irq = rx51_init_irq, diff --git a/arch/arm/mach-omap2/board-zoom-debugboard.c b/arch/arm/mach-omap2/board-zoom-debugboard.c index 1f13e2a1f322..91ecddc9057a 100644 --- a/arch/arm/mach-omap2/board-zoom-debugboard.c +++ b/arch/arm/mach-omap2/board-zoom-debugboard.c @@ -14,7 +14,7 @@ #include <linux/smsc911x.h> #include <linux/interrupt.h> -#include <mach/gpmc.h> +#include <plat/gpmc.h> #define ZOOM2_SMSC911X_CS 7 #define ZOOM2_SMSC911X_GPIO 158 diff --git a/arch/arm/mach-omap2/board-zoom2.c b/arch/arm/mach-omap2/board-zoom2.c index ea00486a5e53..4ad9b94ed4ae 100644 --- a/arch/arm/mach-omap2/board-zoom2.c +++ b/arch/arm/mach-omap2/board-zoom2.c @@ -21,8 +21,8 @@ #include <asm/mach-types.h> #include <asm/mach/arch.h> -#include <mach/common.h> -#include <mach/usb.h> +#include <plat/common.h> +#include <plat/usb.h> #include "mmc-twl4030.h" #include "sdram-micron-mt46h32m32lf-6.h" @@ -283,7 +283,7 @@ static void __init omap_zoom2_map_io(void) MACHINE_START(OMAP_ZOOM2, "OMAP Zoom2 board") .phys_io = 0x48000000, - .io_pg_offst = ((0xd8000000) >> 18) & 0xfffc, + .io_pg_offst = ((0xfa000000) >> 18) & 0xfffc, .boot_params = 0x80000100, .map_io = omap_zoom2_map_io, .init_irq = omap_zoom2_init_irq, diff --git a/arch/arm/mach-omap2/clock.c b/arch/arm/mach-omap2/clock.c index f2a92d614f0f..4716206547ac 100644 --- a/arch/arm/mach-omap2/clock.c +++ b/arch/arm/mach-omap2/clock.c @@ -24,13 +24,13 @@ #include <linux/io.h> #include <linux/bitops.h> -#include <mach/clock.h> -#include <mach/clockdomain.h> -#include <mach/cpu.h> -#include <mach/prcm.h> +#include <plat/clock.h> +#include <plat/clockdomain.h> +#include <plat/cpu.h> +#include <plat/prcm.h> #include <asm/div64.h> -#include <mach/sdrc.h> +#include <plat/sdrc.h> #include "sdrc.h" #include "clock.h" #include "prm.h" diff --git a/arch/arm/mach-omap2/clock.h b/arch/arm/mach-omap2/clock.h index 9ae7540f8af2..43b6bedaafd6 100644 --- a/arch/arm/mach-omap2/clock.h +++ b/arch/arm/mach-omap2/clock.h @@ -16,7 +16,7 @@ #ifndef __ARCH_ARM_MACH_OMAP2_CLOCK_H #define __ARCH_ARM_MACH_OMAP2_CLOCK_H -#include <mach/clock.h> +#include <plat/clock.h> /* The maximum error between a target DPLL rate and the rounded rate in Hz */ #define DEFAULT_DPLL_RATE_TOLERANCE 50000 diff --git a/arch/arm/mach-omap2/clock24xx.c b/arch/arm/mach-omap2/clock24xx.c index e2dbedd581e8..e70e7e000eaa 100644 --- a/arch/arm/mach-omap2/clock24xx.c +++ b/arch/arm/mach-omap2/clock24xx.c @@ -28,13 +28,13 @@ #include <linux/cpufreq.h> #include <linux/bitops.h> -#include <mach/clock.h> -#include <mach/sram.h> -#include <mach/prcm.h> +#include <plat/clock.h> +#include <plat/sram.h> +#include <plat/prcm.h> #include <asm/div64.h> #include <asm/clkdev.h> -#include <mach/sdrc.h> +#include <plat/sdrc.h> #include "clock.h" #include "prm.h" #include "prm-regbits-24xx.h" diff --git a/arch/arm/mach-omap2/clock34xx.c b/arch/arm/mach-omap2/clock34xx.c index 489556eecbd1..c258f87e78b9 100644 --- a/arch/arm/mach-omap2/clock34xx.c +++ b/arch/arm/mach-omap2/clock34xx.c @@ -27,13 +27,13 @@ #include <linux/limits.h> #include <linux/bitops.h> -#include <mach/cpu.h> -#include <mach/clock.h> -#include <mach/sram.h> +#include <plat/cpu.h> +#include <plat/clock.h> +#include <plat/sram.h> #include <asm/div64.h> #include <asm/clkdev.h> -#include <mach/sdrc.h> +#include <plat/sdrc.h> #include "clock.h" #include "prm.h" #include "prm-regbits-34xx.h" diff --git a/arch/arm/mach-omap2/clock34xx.h b/arch/arm/mach-omap2/clock34xx.h index c8119781e00a..a1b3de7e2bd7 100644 --- a/arch/arm/mach-omap2/clock34xx.h +++ b/arch/arm/mach-omap2/clock34xx.h @@ -19,7 +19,7 @@ #ifndef __ARCH_ARM_MACH_OMAP2_CLOCK34XX_H #define __ARCH_ARM_MACH_OMAP2_CLOCK34XX_H -#include <mach/control.h> +#include <plat/control.h> #include "clock.h" #include "cm.h" diff --git a/arch/arm/mach-omap2/clockdomain.c b/arch/arm/mach-omap2/clockdomain.c index 58aff8485df9..fcd82320a6a3 100644 --- a/arch/arm/mach-omap2/clockdomain.c +++ b/arch/arm/mach-omap2/clockdomain.c @@ -28,14 +28,14 @@ #include <linux/bitops.h> -#include <mach/clock.h> +#include <plat/clock.h> #include "prm.h" #include "prm-regbits-24xx.h" #include "cm.h" -#include <mach/powerdomain.h> -#include <mach/clockdomain.h> +#include <plat/powerdomain.h> +#include <plat/clockdomain.h> /* clkdm_list contains all registered struct clockdomains */ static LIST_HEAD(clkdm_list); diff --git a/arch/arm/mach-omap2/clockdomains.h b/arch/arm/mach-omap2/clockdomains.h index fe319ae4ca0a..c4ee0761d908 100644 --- a/arch/arm/mach-omap2/clockdomains.h +++ b/arch/arm/mach-omap2/clockdomains.h @@ -10,7 +10,7 @@ #ifndef __ARCH_ARM_MACH_OMAP2_CLOCKDOMAINS_H #define __ARCH_ARM_MACH_OMAP2_CLOCKDOMAINS_H -#include <mach/clockdomain.h> +#include <plat/clockdomain.h> /* * OMAP2/3-common clockdomains diff --git a/arch/arm/mach-omap2/cm.h b/arch/arm/mach-omap2/cm.h index cfd0b726ba44..a2fcfcc253cc 100644 --- a/arch/arm/mach-omap2/cm.h +++ b/arch/arm/mach-omap2/cm.h @@ -17,11 +17,11 @@ #include "prcm-common.h" #define OMAP2420_CM_REGADDR(module, reg) \ - OMAP2_IO_ADDRESS(OMAP2420_CM_BASE + (module) + (reg)) + OMAP2_L4_IO_ADDRESS(OMAP2420_CM_BASE + (module) + (reg)) #define OMAP2430_CM_REGADDR(module, reg) \ - OMAP2_IO_ADDRESS(OMAP2430_CM_BASE + (module) + (reg)) + OMAP2_L4_IO_ADDRESS(OMAP2430_CM_BASE + (module) + (reg)) #define OMAP34XX_CM_REGADDR(module, reg) \ - OMAP2_IO_ADDRESS(OMAP3430_CM_BASE + (module) + (reg)) + OMAP2_L4_IO_ADDRESS(OMAP3430_CM_BASE + (module) + (reg)) /* * Architecture-specific global CM registers diff --git a/arch/arm/mach-omap2/control.c b/arch/arm/mach-omap2/control.c index 5f3aad977842..6adb360c6d45 100644 --- a/arch/arm/mach-omap2/control.c +++ b/arch/arm/mach-omap2/control.c @@ -15,8 +15,8 @@ #include <linux/kernel.h> #include <linux/io.h> -#include <mach/common.h> -#include <mach/control.h> +#include <plat/common.h> +#include <plat/control.h> static void __iomem *omap2_ctrl_base; diff --git a/arch/arm/mach-omap2/devices.c b/arch/arm/mach-omap2/devices.c index faf7a1e0c525..7d4513b619f2 100644 --- a/arch/arm/mach-omap2/devices.c +++ b/arch/arm/mach-omap2/devices.c @@ -20,12 +20,12 @@ #include <asm/mach-types.h> #include <asm/mach/map.h> -#include <mach/control.h> -#include <mach/tc.h> -#include <mach/board.h> -#include <mach/mux.h> +#include <plat/control.h> +#include <plat/tc.h> +#include <plat/board.h> +#include <plat/mux.h> #include <mach/gpio.h> -#include <mach/mmc.h> +#include <plat/mmc.h> #if defined(CONFIG_VIDEO_OMAP2) || defined(CONFIG_VIDEO_OMAP2_MODULE) @@ -250,7 +250,7 @@ static inline void omap_init_sti(void) {} #if defined(CONFIG_SPI_OMAP24XX) || defined(CONFIG_SPI_OMAP24XX_MODULE) -#include <mach/mcspi.h> +#include <plat/mcspi.h> #define OMAP2_MCSPI1_BASE 0x48098000 #define OMAP2_MCSPI2_BASE 0x4809a000 diff --git a/arch/arm/mach-omap2/gpmc-onenand.c b/arch/arm/mach-omap2/gpmc-onenand.c index 54fec53a48e7..7bb69220adfa 100644 --- a/arch/arm/mach-omap2/gpmc-onenand.c +++ b/arch/arm/mach-omap2/gpmc-onenand.c @@ -17,9 +17,9 @@ #include <asm/mach/flash.h> -#include <mach/onenand.h> -#include <mach/board.h> -#include <mach/gpmc.h> +#include <plat/onenand.h> +#include <plat/board.h> +#include <plat/gpmc.h> static struct omap_onenand_platform_data *gpmc_onenand_data; diff --git a/arch/arm/mach-omap2/gpmc-smc91x.c b/arch/arm/mach-omap2/gpmc-smc91x.c index df99d31d8b64..6083e21b3be6 100644 --- a/arch/arm/mach-omap2/gpmc-smc91x.c +++ b/arch/arm/mach-omap2/gpmc-smc91x.c @@ -17,9 +17,9 @@ #include <linux/io.h> #include <linux/smc91x.h> -#include <mach/board.h> -#include <mach/gpmc.h> -#include <mach/gpmc-smc91x.h> +#include <plat/board.h> +#include <plat/gpmc.h> +#include <plat/gpmc-smc91x.h> static struct omap_smc91x_platform_data *gpmc_cfg; diff --git a/arch/arm/mach-omap2/gpmc.c b/arch/arm/mach-omap2/gpmc.c index 15876828db23..004da696ace7 100644 --- a/arch/arm/mach-omap2/gpmc.c +++ b/arch/arm/mach-omap2/gpmc.c @@ -24,9 +24,9 @@ #include <linux/module.h> #include <asm/mach-types.h> -#include <mach/gpmc.h> +#include <plat/gpmc.h> -#include <mach/sdrc.h> +#include <plat/sdrc.h> /* GPMC register offsets */ #define GPMC_REVISION 0x00 diff --git a/arch/arm/mach-omap2/id.c b/arch/arm/mach-omap2/id.c index a98201cc265c..d28e6fec7e47 100644 --- a/arch/arm/mach-omap2/id.c +++ b/arch/arm/mach-omap2/id.c @@ -21,9 +21,9 @@ #include <asm/cputype.h> -#include <mach/common.h> -#include <mach/control.h> -#include <mach/cpu.h> +#include <plat/common.h> +#include <plat/control.h> +#include <plat/cpu.h> static struct omap_chip_id omap_chip; static unsigned int omap_revision; diff --git a/arch/arm/mach-omap2/include/mach/clkdev.h b/arch/arm/mach-omap2/include/mach/clkdev.h new file mode 100644 index 000000000000..53b027441c56 --- /dev/null +++ b/arch/arm/mach-omap2/include/mach/clkdev.h @@ -0,0 +1,5 @@ +/* + * arch/arm/mach-omap2/include/mach/clkdev.h + */ + +#include <plat/clkdev.h> diff --git a/arch/arm/plat-omap/include/mach/debug-macro.S b/arch/arm/mach-omap2/include/mach/debug-macro.S index ac24050e3416..e9f255df9163 100644 --- a/arch/arm/plat-omap/include/mach/debug-macro.S +++ b/arch/arm/mach-omap2/include/mach/debug-macro.S @@ -1,4 +1,4 @@ -/* arch/arm/plat-omap/include/mach/debug-macro.S +/* arch/arm/mach-omap2/include/mach/debug-macro.S * * Debugging macro include header * @@ -14,20 +14,9 @@ .macro addruart,rx mrc p15, 0, \rx, c1, c0 tst \rx, #1 @ MMU enabled? -#ifdef CONFIG_ARCH_OMAP1 - moveq \rx, #0xff000000 @ physical base address - movne \rx, #0xfe000000 @ virtual base - orr \rx, \rx, #0x00fb0000 -#ifdef CONFIG_OMAP_LL_DEBUG_UART3 - orr \rx, \rx, #0x00009000 @ UART 3 -#endif -#if defined(CONFIG_OMAP_LL_DEBUG_UART2) || defined(CONFIG_OMAP_LL_DEBUG_UART3) - orr \rx, \rx, #0x00000800 @ UART 2 & 3 -#endif - -#elif CONFIG_ARCH_OMAP2 +#ifdef CONFIG_ARCH_OMAP2 moveq \rx, #0x48000000 @ physical base address - movne \rx, #0xd8000000 @ virtual base + movne \rx, #0xfa000000 @ virtual base orr \rx, \rx, #0x0006a000 #ifdef CONFIG_OMAP_LL_DEBUG_UART2 add \rx, \rx, #0x00002000 @ UART 2 @@ -38,7 +27,7 @@ #elif defined(CONFIG_ARCH_OMAP3) || defined(CONFIG_ARCH_OMAP4) moveq \rx, #0x48000000 @ physical base address - movne \rx, #0xd8000000 @ virtual base + movne \rx, #0xfa000000 @ virtual base orr \rx, \rx, #0x0006a000 #ifdef CONFIG_OMAP_LL_DEBUG_UART2 add \rx, \rx, #0x00002000 @ UART 2 diff --git a/arch/arm/plat-omap/include/mach/entry-macro.S b/arch/arm/mach-omap2/include/mach/entry-macro.S index a5592991634d..c7f1720bf282 100644 --- a/arch/arm/plat-omap/include/mach/entry-macro.S +++ b/arch/arm/mach-omap2/include/mach/entry-macro.S @@ -15,65 +15,17 @@ #include <mach/irqs.h> #include <asm/hardware/gic.h> -#if defined(CONFIG_ARCH_OMAP1) - -#if defined(CONFIG_ARCH_OMAP730) && \ - (defined(CONFIG_ARCH_OMAP15XX) || defined(CONFIG_ARCH_OMAP16XX)) -#error "FIXME: OMAP730 doesn't support multiple-OMAP" -#elif defined(CONFIG_ARCH_OMAP730) -#define INT_IH2_IRQ INT_730_IH2_IRQ -#elif defined(CONFIG_ARCH_OMAP15XX) -#define INT_IH2_IRQ INT_1510_IH2_IRQ -#elif defined(CONFIG_ARCH_OMAP16XX) -#define INT_IH2_IRQ INT_1610_IH2_IRQ -#else -#warning "IH2 IRQ defaulted" -#define INT_IH2_IRQ INT_1510_IH2_IRQ -#endif - - .macro disable_fiq - .endm - - .macro get_irqnr_preamble, base, tmp - .endm - - .macro arch_ret_to_user, tmp1, tmp2 - .endm - - .macro get_irqnr_and_base, irqnr, irqstat, base, tmp - ldr \base, =OMAP1_IO_ADDRESS(OMAP_IH1_BASE) - ldr \irqnr, [\base, #IRQ_ITR_REG_OFFSET] - ldr \tmp, [\base, #IRQ_MIR_REG_OFFSET] - mov \irqstat, #0xffffffff - bic \tmp, \irqstat, \tmp - tst \irqnr, \tmp - beq 1510f - - ldr \irqnr, [\base, #IRQ_SIR_FIQ_REG_OFFSET] - cmp \irqnr, #0 - ldreq \irqnr, [\base, #IRQ_SIR_IRQ_REG_OFFSET] - cmpeq \irqnr, #INT_IH2_IRQ - ldreq \base, =OMAP1_IO_ADDRESS(OMAP_IH2_BASE) - ldreq \irqnr, [\base, #IRQ_SIR_IRQ_REG_OFFSET] - addeqs \irqnr, \irqnr, #32 -1510: - .endm - -#endif -#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX) || \ - defined(CONFIG_ARCH_OMAP4) - -#include <mach/omap24xx.h> -#include <mach/omap34xx.h> +#include <plat/omap24xx.h> +#include <plat/omap34xx.h> /* REVISIT: This should be set dynamically if CONFIG_MULTI_OMAP2 is selected */ #if defined(CONFIG_ARCH_OMAP2420) || defined(CONFIG_ARCH_OMAP2430) -#define OMAP2_VA_IC_BASE OMAP2_IO_ADDRESS(OMAP24XX_IC_BASE) +#define OMAP2_VA_IC_BASE OMAP2_L4_IO_ADDRESS(OMAP24XX_IC_BASE) #elif defined(CONFIG_ARCH_OMAP34XX) -#define OMAP2_VA_IC_BASE OMAP2_IO_ADDRESS(OMAP34XX_IC_BASE) +#define OMAP2_VA_IC_BASE OMAP2_L4_IO_ADDRESS(OMAP34XX_IC_BASE) #endif #if defined(CONFIG_ARCH_OMAP4) -#include <mach/omap44xx.h> +#include <plat/omap44xx.h> #endif #define INTCPS_SIR_IRQ_OFFSET 0x0040 /* Active interrupt offset */ #define ACTIVEIRQ_MASK 0x7f /* Active interrupt bits */ @@ -104,6 +56,8 @@ .endm #else +#define OMAP44XX_VA_GIC_CPU_BASE OMAP2_L4_IO_ADDRESS(OMAP44XX_GIC_CPU_BASE) + /* * The interrupt numbering scheme is defined in the * interrupt controller spec. To wit: @@ -168,5 +122,3 @@ .macro irq_prio_table .endm - -#endif diff --git a/arch/arm/mach-omap2/include/mach/gpio.h b/arch/arm/mach-omap2/include/mach/gpio.h new file mode 100644 index 000000000000..be4d290d57ee --- /dev/null +++ b/arch/arm/mach-omap2/include/mach/gpio.h @@ -0,0 +1,5 @@ +/* + * arch/arm/mach-omap2/include/mach/gpio.h + */ + +#include <plat/gpio.h> diff --git a/arch/arm/mach-omap2/include/mach/hardware.h b/arch/arm/mach-omap2/include/mach/hardware.h new file mode 100644 index 000000000000..78edf9d33f71 --- /dev/null +++ b/arch/arm/mach-omap2/include/mach/hardware.h @@ -0,0 +1,5 @@ +/* + * arch/arm/mach-omap2/include/mach/hardware.h + */ + +#include <plat/hardware.h> diff --git a/arch/arm/mach-omap2/include/mach/io.h b/arch/arm/mach-omap2/include/mach/io.h new file mode 100644 index 000000000000..fd78f31aa1ad --- /dev/null +++ b/arch/arm/mach-omap2/include/mach/io.h @@ -0,0 +1,5 @@ +/* + * arch/arm/mach-omap2/include/mach/io.h + */ + +#include <plat/io.h> diff --git a/arch/arm/mach-omap2/include/mach/irqs.h b/arch/arm/mach-omap2/include/mach/irqs.h new file mode 100644 index 000000000000..44dab7725696 --- /dev/null +++ b/arch/arm/mach-omap2/include/mach/irqs.h @@ -0,0 +1,5 @@ +/* + * arch/arm/mach-omap2/include/mach/irqs.h + */ + +#include <plat/irqs.h> diff --git a/arch/arm/mach-omap2/include/mach/memory.h b/arch/arm/mach-omap2/include/mach/memory.h new file mode 100644 index 000000000000..ca6d32a917dd --- /dev/null +++ b/arch/arm/mach-omap2/include/mach/memory.h @@ -0,0 +1,5 @@ +/* + * arch/arm/mach-omap2/include/mach/memory.h + */ + +#include <plat/memory.h> diff --git a/arch/arm/mach-omap2/include/mach/smp.h b/arch/arm/mach-omap2/include/mach/smp.h new file mode 100644 index 000000000000..323675f21b69 --- /dev/null +++ b/arch/arm/mach-omap2/include/mach/smp.h @@ -0,0 +1,5 @@ +/* + * arch/arm/mach-omap2/include/mach/smp.h + */ + +#include <plat/smp.h> diff --git a/arch/arm/mach-omap2/include/mach/system.h b/arch/arm/mach-omap2/include/mach/system.h new file mode 100644 index 000000000000..d488721ab90b --- /dev/null +++ b/arch/arm/mach-omap2/include/mach/system.h @@ -0,0 +1,5 @@ +/* + * arch/arm/mach-omap2/include/mach/system.h + */ + +#include <plat/system.h> diff --git a/arch/arm/mach-omap2/include/mach/timex.h b/arch/arm/mach-omap2/include/mach/timex.h new file mode 100644 index 000000000000..de9f8fc40e7c --- /dev/null +++ b/arch/arm/mach-omap2/include/mach/timex.h @@ -0,0 +1,5 @@ +/* + * arch/arm/mach-omap2/include/mach/timex.h + */ + +#include <plat/timex.h> diff --git a/arch/arm/mach-omap2/include/mach/uncompress.h b/arch/arm/mach-omap2/include/mach/uncompress.h new file mode 100644 index 000000000000..78e0557bfd4e --- /dev/null +++ b/arch/arm/mach-omap2/include/mach/uncompress.h @@ -0,0 +1,5 @@ +/* + * arch/arm/mach-omap2/include/mach/uncompress.h + */ + +#include <plat/uncompress.h> diff --git a/arch/arm/plat-omap/include/mach/vmalloc.h b/arch/arm/mach-omap2/include/mach/vmalloc.h index b97dfafeebda..9ce9b6e8ad23 100644 --- a/arch/arm/plat-omap/include/mach/vmalloc.h +++ b/arch/arm/mach-omap2/include/mach/vmalloc.h @@ -17,5 +17,4 @@ * along with this program; if not, write to the Free Software * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA */ -#define VMALLOC_END (PAGE_OFFSET + 0x18000000) - +#define VMALLOC_END (PAGE_OFFSET + 0x38000000) diff --git a/arch/arm/mach-omap2/io.c b/arch/arm/mach-omap2/io.c index 56be87d13edb..59d28b2fd8c5 100644 --- a/arch/arm/mach-omap2/io.c +++ b/arch/arm/mach-omap2/io.c @@ -27,24 +27,24 @@ #include <asm/mach/map.h> -#include <mach/mux.h> -#include <mach/omapfb.h> -#include <mach/sram.h> -#include <mach/sdrc.h> -#include <mach/gpmc.h> -#include <mach/serial.h> +#include <plat/mux.h> +#include <plat/omapfb.h> +#include <plat/sram.h> +#include <plat/sdrc.h> +#include <plat/gpmc.h> +#include <plat/serial.h> #ifndef CONFIG_ARCH_OMAP4 /* FIXME: Remove this once clkdev is ready */ #include "clock.h" -#include <mach/omap-pm.h> -#include <mach/powerdomain.h> +#include <plat/omap-pm.h> +#include <plat/powerdomain.h> #include "powerdomains.h" -#include <mach/clockdomain.h> +#include <plat/clockdomain.h> #include "clockdomains.h" #endif -#include <mach/omap_hwmod.h> +#include <plat/omap_hwmod.h> #include "omap_hwmod_2420.h" #include "omap_hwmod_2430.h" #include "omap_hwmod_34xx.h" @@ -203,6 +203,24 @@ static struct map_desc omap44xx_io_desc[] __initdata = { .type = MT_DEVICE, }, { + .virtual = OMAP44XX_EMIF1_VIRT, + .pfn = __phys_to_pfn(OMAP44XX_EMIF1_PHYS), + .length = OMAP44XX_EMIF1_SIZE, + .type = MT_DEVICE, + }, + { + .virtual = OMAP44XX_EMIF2_VIRT, + .pfn = __phys_to_pfn(OMAP44XX_EMIF2_PHYS), + .length = OMAP44XX_EMIF2_SIZE, + .type = MT_DEVICE, + }, + { + .virtual = OMAP44XX_DMM_VIRT, + .pfn = __phys_to_pfn(OMAP44XX_DMM_PHYS), + .length = OMAP44XX_DMM_SIZE, + .type = MT_DEVICE, + }, + { .virtual = L4_PER_44XX_VIRT, .pfn = __phys_to_pfn(L4_PER_44XX_PHYS), .length = L4_PER_44XX_SIZE, diff --git a/arch/arm/mach-omap2/iommu2.c b/arch/arm/mach-omap2/iommu2.c index 4a0e1cd5c1f4..6f4b7cc8f4d1 100644 --- a/arch/arm/mach-omap2/iommu2.c +++ b/arch/arm/mach-omap2/iommu2.c @@ -17,7 +17,7 @@ #include <linux/module.h> #include <linux/stringify.h> -#include <mach/iommu.h> +#include <plat/iommu.h> /* * omap2 architecture specific register bit definitions diff --git a/arch/arm/mach-omap2/irq.c b/arch/arm/mach-omap2/irq.c index b82863887f10..1db121f437d2 100644 --- a/arch/arm/mach-omap2/irq.c +++ b/arch/arm/mach-omap2/irq.c @@ -178,12 +178,20 @@ void __init omap_init_irq(void) int i; for (i = 0; i < ARRAY_SIZE(irq_banks); i++) { + unsigned long base; struct omap_irq_bank *bank = irq_banks + i; if (cpu_is_omap24xx()) - bank->base_reg = OMAP2_IO_ADDRESS(OMAP24XX_IC_BASE); + base = OMAP24XX_IC_BASE; else if (cpu_is_omap34xx()) - bank->base_reg = OMAP2_IO_ADDRESS(OMAP34XX_IC_BASE); + base = OMAP34XX_IC_BASE; + + /* Static mapping, never released */ + bank->base_reg = ioremap(base, SZ_4K); + if (!bank->base_reg) { + printk(KERN_ERR "Could not ioremap irq bank%i\n", i); + continue; + } omap_irq_bank_init_one(bank); diff --git a/arch/arm/mach-omap2/mailbox.c b/arch/arm/mach-omap2/mailbox.c index c035ad3426d0..46e1f2ebcdca 100644 --- a/arch/arm/mach-omap2/mailbox.c +++ b/arch/arm/mach-omap2/mailbox.c @@ -15,7 +15,7 @@ #include <linux/err.h> #include <linux/platform_device.h> #include <linux/io.h> -#include <mach/mailbox.h> +#include <plat/mailbox.h> #include <mach/irqs.h> #define MAILBOX_REVISION 0x000 diff --git a/arch/arm/mach-omap2/mcbsp.c b/arch/arm/mach-omap2/mcbsp.c index a846aa1ebb4d..baa451733850 100644 --- a/arch/arm/mach-omap2/mcbsp.c +++ b/arch/arm/mach-omap2/mcbsp.c @@ -18,10 +18,10 @@ #include <linux/platform_device.h> #include <mach/irqs.h> -#include <mach/dma.h> -#include <mach/mux.h> -#include <mach/cpu.h> -#include <mach/mcbsp.h> +#include <plat/dma.h> +#include <plat/mux.h> +#include <plat/cpu.h> +#include <plat/mcbsp.h> static void omap2_mcbsp2_mux_setup(void) { diff --git a/arch/arm/mach-omap2/mmc-twl4030.c b/arch/arm/mach-omap2/mmc-twl4030.c index c9c59a2db4e2..340391468909 100644 --- a/arch/arm/mach-omap2/mmc-twl4030.c +++ b/arch/arm/mach-omap2/mmc-twl4030.c @@ -20,9 +20,9 @@ #include <linux/regulator/consumer.h> #include <mach/hardware.h> -#include <mach/control.h> -#include <mach/mmc.h> -#include <mach/board.h> +#include <plat/control.h> +#include <plat/mmc.h> +#include <plat/board.h> #include "mmc-twl4030.h" diff --git a/arch/arm/mach-omap2/mux.c b/arch/arm/mach-omap2/mux.c index b5fac32aae70..32c953e608db 100644 --- a/arch/arm/mach-omap2/mux.c +++ b/arch/arm/mach-omap2/mux.c @@ -30,8 +30,8 @@ #include <asm/system.h> -#include <mach/control.h> -#include <mach/mux.h> +#include <plat/control.h> +#include <plat/mux.h> #ifdef CONFIG_OMAP_MUX diff --git a/arch/arm/mach-omap2/omap-smp.c b/arch/arm/mach-omap2/omap-smp.c index 48ee295db275..4890bcf4dadd 100644 --- a/arch/arm/mach-omap2/omap-smp.c +++ b/arch/arm/mach-omap2/omap-smp.c @@ -24,13 +24,14 @@ #include <asm/localtimer.h> #include <asm/smp_scu.h> #include <mach/hardware.h> +#include <plat/common.h> /* Registers used for communicating startup information */ -#define OMAP4_AUXCOREBOOT_REG0 (OMAP44XX_VA_WKUPGEN_BASE + 0x800) -#define OMAP4_AUXCOREBOOT_REG1 (OMAP44XX_VA_WKUPGEN_BASE + 0x804) +static void __iomem *omap4_auxcoreboot_reg0; +static void __iomem *omap4_auxcoreboot_reg1; /* SCU base address */ -static void __iomem *scu_base = OMAP44XX_VA_SCU_BASE; +static void __iomem *scu_base; /* * Use SCU config register to count number of cores @@ -53,8 +54,7 @@ void __cpuinit platform_secondary_init(unsigned int cpu) * core (e.g. timer irq), then they will not have been enabled * for us: do so */ - - gic_cpu_init(0, OMAP2_IO_ADDRESS(OMAP44XX_GIC_CPU_BASE)); + gic_cpu_init(0, gic_cpu_base_addr); /* * Synchronise with the boot thread. @@ -79,7 +79,7 @@ int __cpuinit boot_secondary(unsigned int cpu, struct task_struct *idle) * the AuxCoreBoot1 register is updated with cpu state * A barrier is added to ensure that write buffer is drained */ - __raw_writel(cpu, OMAP4_AUXCOREBOOT_REG1); + __raw_writel(cpu, omap4_auxcoreboot_reg1); smp_wmb(); timeout = jiffies + (1 * HZ); @@ -104,7 +104,7 @@ static void __init wakeup_secondary(void) * A barrier is added to ensure that write buffer is drained */ __raw_writel(virt_to_phys(omap_secondary_startup), \ - OMAP4_AUXCOREBOOT_REG0); + omap4_auxcoreboot_reg0); smp_wmb(); /* @@ -120,7 +120,13 @@ static void __init wakeup_secondary(void) */ void __init smp_init_cpus(void) { - unsigned int i, ncores = get_core_count(); + unsigned int i, ncores; + + /* Never released */ + scu_base = ioremap(OMAP44XX_SCU_BASE, SZ_256); + BUG_ON(!scu_base); + + ncores = get_core_count(); for (i = 0; i < ncores; i++) set_cpu_possible(i, true); @@ -130,6 +136,7 @@ void __init smp_prepare_cpus(unsigned int max_cpus) { unsigned int ncores = get_core_count(); unsigned int cpu = smp_processor_id(); + void __iomem *omap4_wkupgen_base; int i; /* sanity check */ @@ -161,6 +168,12 @@ void __init smp_prepare_cpus(unsigned int max_cpus) for (i = 0; i < max_cpus; i++) set_cpu_present(i, true); + /* Never released */ + omap4_wkupgen_base = ioremap(OMAP44XX_WKUPGEN_BASE, SZ_4K); + BUG_ON(!omap4_wkupgen_base); + omap4_auxcoreboot_reg0 = omap4_wkupgen_base + 0x800; + omap4_auxcoreboot_reg1 = omap4_wkupgen_base + 0x804; + if (max_cpus > 1) { /* * Enable the local timer or broadcast device for the diff --git a/arch/arm/mach-omap2/omap3-iommu.c b/arch/arm/mach-omap2/omap3-iommu.c index 194189c746c2..6a9bf4f59d8a 100644 --- a/arch/arm/mach-omap2/omap3-iommu.c +++ b/arch/arm/mach-omap2/omap3-iommu.c @@ -12,7 +12,7 @@ #include <linux/platform_device.h> -#include <mach/iommu.h> +#include <plat/iommu.h> #define OMAP3_MMU1_BASE 0x480bd400 #define OMAP3_MMU2_BASE 0x5d000000 diff --git a/arch/arm/mach-omap2/omap_hwmod.c b/arch/arm/mach-omap2/omap_hwmod.c index d2e0f1c95961..633b216a8b26 100644 --- a/arch/arm/mach-omap2/omap_hwmod.c +++ b/arch/arm/mach-omap2/omap_hwmod.c @@ -45,11 +45,11 @@ #include <linux/mutex.h> #include <linux/bootmem.h> -#include <mach/cpu.h> -#include <mach/clockdomain.h> -#include <mach/powerdomain.h> -#include <mach/clock.h> -#include <mach/omap_hwmod.h> +#include <plat/cpu.h> +#include <plat/clockdomain.h> +#include <plat/powerdomain.h> +#include <plat/clock.h> +#include <plat/omap_hwmod.h> #include "cm.h" @@ -496,6 +496,7 @@ static void __iomem *_find_mpu_rt_base(struct omap_hwmod *oh, u8 index) struct omap_hwmod_addr_space *mem; int i; int found = 0; + void __iomem *va_start; if (!oh || oh->slaves_cnt == 0) return NULL; @@ -509,16 +510,20 @@ static void __iomem *_find_mpu_rt_base(struct omap_hwmod *oh, u8 index) } } - /* XXX use ioremap() instead? */ - - if (found) + if (found) { + va_start = ioremap(mem->pa_start, mem->pa_end - mem->pa_start); + if (!va_start) { + pr_err("omap_hwmod: %s: Could not ioremap\n", oh->name); + return NULL; + } pr_debug("omap_hwmod: %s: MPU register target at va %p\n", - oh->name, OMAP2_IO_ADDRESS(mem->pa_start)); - else + oh->name, va_start); + } else { pr_debug("omap_hwmod: %s: no MPU register target found\n", oh->name); + } - return (found) ? OMAP2_IO_ADDRESS(mem->pa_start) : NULL; + return (found) ? va_start : NULL; } /** @@ -1148,6 +1153,7 @@ int omap_hwmod_unregister(struct omap_hwmod *oh) pr_debug("omap_hwmod: %s: unregistering\n", oh->name); mutex_lock(&omap_hwmod_mutex); + iounmap(oh->_rt_va); list_del(&oh->node); mutex_unlock(&omap_hwmod_mutex); diff --git a/arch/arm/mach-omap2/omap_hwmod_2420.h b/arch/arm/mach-omap2/omap_hwmod_2420.h index 767e4965ac4e..a9ca1b99a301 100644 --- a/arch/arm/mach-omap2/omap_hwmod_2420.h +++ b/arch/arm/mach-omap2/omap_hwmod_2420.h @@ -16,10 +16,10 @@ #ifdef CONFIG_ARCH_OMAP2420 -#include <mach/omap_hwmod.h> +#include <plat/omap_hwmod.h> #include <mach/irqs.h> -#include <mach/cpu.h> -#include <mach/dma.h> +#include <plat/cpu.h> +#include <plat/dma.h> #include "prm-regbits-24xx.h" diff --git a/arch/arm/mach-omap2/omap_hwmod_2430.h b/arch/arm/mach-omap2/omap_hwmod_2430.h index a412be6420ec..59a208bea6c2 100644 --- a/arch/arm/mach-omap2/omap_hwmod_2430.h +++ b/arch/arm/mach-omap2/omap_hwmod_2430.h @@ -16,10 +16,10 @@ #ifdef CONFIG_ARCH_OMAP2430 -#include <mach/omap_hwmod.h> +#include <plat/omap_hwmod.h> #include <mach/irqs.h> -#include <mach/cpu.h> -#include <mach/dma.h> +#include <plat/cpu.h> +#include <plat/dma.h> #include "prm-regbits-24xx.h" diff --git a/arch/arm/mach-omap2/omap_hwmod_34xx.h b/arch/arm/mach-omap2/omap_hwmod_34xx.h index 1e069f831575..b6076b9c364e 100644 --- a/arch/arm/mach-omap2/omap_hwmod_34xx.h +++ b/arch/arm/mach-omap2/omap_hwmod_34xx.h @@ -14,10 +14,10 @@ #ifdef CONFIG_ARCH_OMAP34XX -#include <mach/omap_hwmod.h> +#include <plat/omap_hwmod.h> #include <mach/irqs.h> -#include <mach/cpu.h> -#include <mach/dma.h> +#include <plat/cpu.h> +#include <plat/dma.h> #include "prm-regbits-34xx.h" diff --git a/arch/arm/mach-omap2/pm-debug.c b/arch/arm/mach-omap2/pm-debug.c index 2fc4d6abbd0a..7eb2c12c8b7c 100644 --- a/arch/arm/mach-omap2/pm-debug.c +++ b/arch/arm/mach-omap2/pm-debug.c @@ -26,10 +26,10 @@ #include <linux/io.h> #include <linux/module.h> -#include <mach/clock.h> -#include <mach/board.h> -#include <mach/powerdomain.h> -#include <mach/clockdomain.h> +#include <plat/clock.h> +#include <plat/board.h> +#include <plat/powerdomain.h> +#include <plat/clockdomain.h> #include "prm.h" #include "cm.h" @@ -51,7 +51,8 @@ int omap2_pm_debug; regs[reg_count++].val = __raw_readl(reg) #define DUMP_INTC_REG(reg, off) \ regs[reg_count].name = #reg; \ - regs[reg_count++].val = __raw_readl(OMAP2_IO_ADDRESS(0x480fe000 + (off))) + regs[reg_count++].val = \ + __raw_readl(OMAP2_L4_IO_ADDRESS(0x480fe000 + (off))) static int __init pm_dbg_init(void); diff --git a/arch/arm/mach-omap2/pm.h b/arch/arm/mach-omap2/pm.h index 8400f5768923..85b6face5392 100644 --- a/arch/arm/mach-omap2/pm.h +++ b/arch/arm/mach-omap2/pm.h @@ -11,7 +11,7 @@ #ifndef __ARCH_ARM_MACH_OMAP2_PM_H #define __ARCH_ARM_MACH_OMAP2_PM_H -#include <mach/powerdomain.h> +#include <plat/powerdomain.h> extern int omap3_pm_get_suspend_state(struct powerdomain *pwrdm); extern int omap3_pm_set_suspend_state(struct powerdomain *pwrdm, int state); diff --git a/arch/arm/mach-omap2/pm24xx.c b/arch/arm/mach-omap2/pm24xx.c index bff5c4e89742..cba05b9f041f 100644 --- a/arch/arm/mach-omap2/pm24xx.c +++ b/arch/arm/mach-omap2/pm24xx.c @@ -36,12 +36,12 @@ #include <asm/mach-types.h> #include <mach/irqs.h> -#include <mach/clock.h> -#include <mach/sram.h> -#include <mach/control.h> -#include <mach/mux.h> -#include <mach/dma.h> -#include <mach/board.h> +#include <plat/clock.h> +#include <plat/sram.h> +#include <plat/control.h> +#include <plat/mux.h> +#include <plat/dma.h> +#include <plat/board.h> #include "prm.h" #include "prm-regbits-24xx.h" @@ -50,8 +50,8 @@ #include "sdrc.h" #include "pm.h" -#include <mach/powerdomain.h> -#include <mach/clockdomain.h> +#include <plat/powerdomain.h> +#include <plat/clockdomain.h> static void (*omap2_sram_idle)(void); static void (*omap2_sram_suspend)(u32 dllctrl, void __iomem *sdrc_dlla_ctrl, diff --git a/arch/arm/mach-omap2/pm34xx.c b/arch/arm/mach-omap2/pm34xx.c index 89463190923a..391054900a6a 100644 --- a/arch/arm/mach-omap2/pm34xx.c +++ b/arch/arm/mach-omap2/pm34xx.c @@ -23,11 +23,11 @@ #include <linux/err.h> #include <linux/gpio.h> -#include <mach/sram.h> -#include <mach/clockdomain.h> -#include <mach/powerdomain.h> -#include <mach/control.h> -#include <mach/serial.h> +#include <plat/sram.h> +#include <plat/clockdomain.h> +#include <plat/powerdomain.h> +#include <plat/control.h> +#include <plat/serial.h> #include "cm.h" #include "cm-regbits-34xx.h" diff --git a/arch/arm/mach-omap2/powerdomain.c b/arch/arm/mach-omap2/powerdomain.c index f00289abd30f..b6990e377783 100644 --- a/arch/arm/mach-omap2/powerdomain.c +++ b/arch/arm/mach-omap2/powerdomain.c @@ -31,9 +31,9 @@ #include "prm.h" #include "prm-regbits-34xx.h" -#include <mach/cpu.h> -#include <mach/powerdomain.h> -#include <mach/clockdomain.h> +#include <plat/cpu.h> +#include <plat/powerdomain.h> +#include <plat/clockdomain.h> #include "pm.h" diff --git a/arch/arm/mach-omap2/powerdomains.h b/arch/arm/mach-omap2/powerdomains.h index 691470ea4c6a..057b2e3e2c35 100644 --- a/arch/arm/mach-omap2/powerdomains.h +++ b/arch/arm/mach-omap2/powerdomains.h @@ -63,7 +63,7 @@ * XXX encode hardware fixed wakeup dependencies -- esp. for 3430 CORE */ -#include <mach/powerdomain.h> +#include <plat/powerdomain.h> #include "prcm-common.h" #include "prm.h" diff --git a/arch/arm/mach-omap2/powerdomains24xx.h b/arch/arm/mach-omap2/powerdomains24xx.h index 9f08dc3f7fd2..bd249a495aa9 100644 --- a/arch/arm/mach-omap2/powerdomains24xx.h +++ b/arch/arm/mach-omap2/powerdomains24xx.h @@ -20,7 +20,7 @@ * the array in mach-omap2/powerdomains.h. */ -#include <mach/powerdomain.h> +#include <plat/powerdomain.h> #include "prcm-common.h" #include "prm.h" diff --git a/arch/arm/mach-omap2/powerdomains34xx.h b/arch/arm/mach-omap2/powerdomains34xx.h index 4dcf94b800ab..f70eb2da17e7 100644 --- a/arch/arm/mach-omap2/powerdomains34xx.h +++ b/arch/arm/mach-omap2/powerdomains34xx.h @@ -20,7 +20,7 @@ * the array in mach-omap2/powerdomains.h. */ -#include <mach/powerdomain.h> +#include <plat/powerdomain.h> #include "prcm-common.h" #include "prm.h" diff --git a/arch/arm/mach-omap2/prcm.c b/arch/arm/mach-omap2/prcm.c index ced555a4cd1a..b0d3ad05be2e 100644 --- a/arch/arm/mach-omap2/prcm.c +++ b/arch/arm/mach-omap2/prcm.c @@ -19,8 +19,8 @@ #include <linux/io.h> #include <linux/delay.h> -#include <mach/common.h> -#include <mach/prcm.h> +#include <plat/common.h> +#include <plat/prcm.h> #include "clock.h" #include "prm.h" diff --git a/arch/arm/mach-omap2/prm.h b/arch/arm/mach-omap2/prm.h index 03c467c35f54..a117f853ea39 100644 --- a/arch/arm/mach-omap2/prm.h +++ b/arch/arm/mach-omap2/prm.h @@ -17,11 +17,11 @@ #include "prcm-common.h" #define OMAP2420_PRM_REGADDR(module, reg) \ - OMAP2_IO_ADDRESS(OMAP2420_PRM_BASE + (module) + (reg)) + OMAP2_L4_IO_ADDRESS(OMAP2420_PRM_BASE + (module) + (reg)) #define OMAP2430_PRM_REGADDR(module, reg) \ - OMAP2_IO_ADDRESS(OMAP2430_PRM_BASE + (module) + (reg)) + OMAP2_L4_IO_ADDRESS(OMAP2430_PRM_BASE + (module) + (reg)) #define OMAP34XX_PRM_REGADDR(module, reg) \ - OMAP2_IO_ADDRESS(OMAP3430_PRM_BASE + (module) + (reg)) + OMAP2_L4_IO_ADDRESS(OMAP3430_PRM_BASE + (module) + (reg)) /* * Architecture-specific global PRM registers diff --git a/arch/arm/mach-omap2/sdram-micron-mt46h32m32lf-6.h b/arch/arm/mach-omap2/sdram-micron-mt46h32m32lf-6.h index 02e1c2d4705f..a391b4939f74 100644 --- a/arch/arm/mach-omap2/sdram-micron-mt46h32m32lf-6.h +++ b/arch/arm/mach-omap2/sdram-micron-mt46h32m32lf-6.h @@ -14,7 +14,7 @@ #ifndef ARCH_ARM_MACH_OMAP2_SDRAM_MICRON_MT46H32M32LF #define ARCH_ARM_MACH_OMAP2_SDRAM_MICRON_MT46H32M32LF -#include <mach/sdrc.h> +#include <plat/sdrc.h> /* Micron MT46H32M32LF-6 */ /* XXX Using ARE = 0x1 (no autorefresh burst) -- can this be changed? */ diff --git a/arch/arm/mach-omap2/sdram-qimonda-hyb18m512160af-6.h b/arch/arm/mach-omap2/sdram-qimonda-hyb18m512160af-6.h index 3751d293cb1f..0e518a72831f 100644 --- a/arch/arm/mach-omap2/sdram-qimonda-hyb18m512160af-6.h +++ b/arch/arm/mach-omap2/sdram-qimonda-hyb18m512160af-6.h @@ -14,7 +14,7 @@ #ifndef ARCH_ARM_MACH_OMAP2_SDRAM_QIMONDA_HYB18M512160AF6 #define ARCH_ARM_MACH_OMAP2_SDRAM_QIMONDA_HYB18M512160AF6 -#include <mach/sdrc.h> +#include <plat/sdrc.h> /* Qimonda HYB18M512160AF-6 */ static struct omap_sdrc_params hyb18m512160af6_sdrc_params[] = { diff --git a/arch/arm/mach-omap2/sdrc.c b/arch/arm/mach-omap2/sdrc.c index 9e3bd4fa7810..07000de48f34 100644 --- a/arch/arm/mach-omap2/sdrc.c +++ b/arch/arm/mach-omap2/sdrc.c @@ -23,13 +23,13 @@ #include <linux/clk.h> #include <linux/io.h> -#include <mach/common.h> -#include <mach/clock.h> -#include <mach/sram.h> +#include <plat/common.h> +#include <plat/clock.h> +#include <plat/sram.h> #include "prm.h" -#include <mach/sdrc.h> +#include <plat/sdrc.h> #include "sdrc.h" static struct omap_sdrc_params *sdrc_init_params_cs0, *sdrc_init_params_cs1; diff --git a/arch/arm/mach-omap2/sdrc.h b/arch/arm/mach-omap2/sdrc.h index 0837eda5f2b6..48207b018989 100644 --- a/arch/arm/mach-omap2/sdrc.h +++ b/arch/arm/mach-omap2/sdrc.h @@ -15,7 +15,7 @@ */ #undef DEBUG -#include <mach/sdrc.h> +#include <plat/sdrc.h> #ifndef __ASSEMBLER__ extern void __iomem *omap2_sdrc_base; @@ -48,9 +48,12 @@ static inline u32 sms_read_reg(u16 reg) return __raw_readl(OMAP_SMS_REGADDR(reg)); } #else -#define OMAP242X_SDRC_REGADDR(reg) OMAP2_IO_ADDRESS(OMAP2420_SDRC_BASE + (reg)) -#define OMAP243X_SDRC_REGADDR(reg) OMAP2_IO_ADDRESS(OMAP243X_SDRC_BASE + (reg)) -#define OMAP34XX_SDRC_REGADDR(reg) OMAP2_IO_ADDRESS(OMAP343X_SDRC_BASE + (reg)) +#define OMAP242X_SDRC_REGADDR(reg) \ + OMAP2_L3_IO_ADDRESS(OMAP2420_SDRC_BASE + (reg)) +#define OMAP243X_SDRC_REGADDR(reg) \ + OMAP2_L3_IO_ADDRESS(OMAP243X_SDRC_BASE + (reg)) +#define OMAP34XX_SDRC_REGADDR(reg) \ + OMAP2_L3_IO_ADDRESS(OMAP343X_SDRC_BASE + (reg)) #endif /* __ASSEMBLER__ */ #endif diff --git a/arch/arm/mach-omap2/sdrc2xxx.c b/arch/arm/mach-omap2/sdrc2xxx.c index feaec7eaf6bd..0f4d27aef44d 100644 --- a/arch/arm/mach-omap2/sdrc2xxx.c +++ b/arch/arm/mach-omap2/sdrc2xxx.c @@ -24,13 +24,13 @@ #include <linux/clk.h> #include <linux/io.h> -#include <mach/common.h> -#include <mach/clock.h> -#include <mach/sram.h> +#include <plat/common.h> +#include <plat/clock.h> +#include <plat/sram.h> #include "prm.h" #include "clock.h" -#include <mach/sdrc.h> +#include <plat/sdrc.h> #include "sdrc.h" /* Memory timing, DLL mode flags */ diff --git a/arch/arm/mach-omap2/serial.c b/arch/arm/mach-omap2/serial.c index 54dfeb5d5667..a5aecffe03ff 100644 --- a/arch/arm/mach-omap2/serial.c +++ b/arch/arm/mach-omap2/serial.c @@ -24,10 +24,10 @@ #include <linux/clk.h> #include <linux/io.h> -#include <mach/common.h> -#include <mach/board.h> -#include <mach/clock.h> -#include <mach/control.h> +#include <plat/common.h> +#include <plat/board.h> +#include <plat/clock.h> +#include <plat/control.h> #include "prm.h" #include "pm.h" @@ -73,7 +73,6 @@ static LIST_HEAD(uart_list); static struct plat_serial8250_port serial_platform_data0[] = { { - .membase = OMAP2_IO_ADDRESS(OMAP_UART1_BASE), .mapbase = OMAP_UART1_BASE, .irq = 72, .flags = UPF_BOOT_AUTOCONF, @@ -87,7 +86,6 @@ static struct plat_serial8250_port serial_platform_data0[] = { static struct plat_serial8250_port serial_platform_data1[] = { { - .membase = OMAP2_IO_ADDRESS(OMAP_UART2_BASE), .mapbase = OMAP_UART2_BASE, .irq = 73, .flags = UPF_BOOT_AUTOCONF, @@ -101,7 +99,6 @@ static struct plat_serial8250_port serial_platform_data1[] = { static struct plat_serial8250_port serial_platform_data2[] = { { - .membase = OMAP2_IO_ADDRESS(OMAP_UART3_BASE), .mapbase = OMAP_UART3_BASE, .irq = 74, .flags = UPF_BOOT_AUTOCONF, @@ -116,7 +113,6 @@ static struct plat_serial8250_port serial_platform_data2[] = { #ifdef CONFIG_ARCH_OMAP4 static struct plat_serial8250_port serial_platform_data3[] = { { - .membase = OMAP2_IO_ADDRESS(OMAP_UART4_BASE), .mapbase = OMAP_UART4_BASE, .irq = 70, .flags = UPF_BOOT_AUTOCONF, @@ -595,6 +591,16 @@ void __init omap_serial_early_init(void) struct device *dev = &pdev->dev; struct plat_serial8250_port *p = dev->platform_data; + /* + * Module 4KB + L4 interconnect 4KB + * Static mapping, never released + */ + p->membase = ioremap(p->mapbase, SZ_8K); + if (!p->membase) { + printk(KERN_ERR "ioremap failed for uart%i\n", i + 1); + continue; + } + sprintf(name, "uart%d_ick", i+1); uart->ick = clk_get(NULL, name); if (IS_ERR(uart->ick)) { diff --git a/arch/arm/mach-omap2/sleep24xx.S b/arch/arm/mach-omap2/sleep24xx.S index 130aadbfa083..c7780cc8d919 100644 --- a/arch/arm/mach-omap2/sleep24xx.S +++ b/arch/arm/mach-omap2/sleep24xx.S @@ -29,7 +29,7 @@ #include <asm/assembler.h> #include <mach/io.h> -#include <mach/omap24xx.h> +#include <plat/omap24xx.h> #include "sdrc.h" diff --git a/arch/arm/mach-omap2/sleep34xx.S b/arch/arm/mach-omap2/sleep34xx.S index e5e2553e79a6..6a749f2fea63 100644 --- a/arch/arm/mach-omap2/sleep34xx.S +++ b/arch/arm/mach-omap2/sleep34xx.S @@ -27,7 +27,7 @@ #include <linux/linkage.h> #include <asm/assembler.h> #include <mach/io.h> -#include <mach/control.h> +#include <plat/control.h> #include "prm.h" #include "sdrc.h" diff --git a/arch/arm/mach-omap2/sram242x.S b/arch/arm/mach-omap2/sram242x.S index 9b62208658bc..92e6e1a12af8 100644 --- a/arch/arm/mach-omap2/sram242x.S +++ b/arch/arm/mach-omap2/sram242x.S @@ -128,7 +128,7 @@ omap242x_sdi_prcm_voltctrl: prcm_mask_val: .word 0xFFFF3FFC omap242x_sdi_timer_32ksynct_cr: - .word OMAP2_IO_ADDRESS(OMAP2420_32KSYNCT_BASE + 0x010) + .word OMAP2_L4_IO_ADDRESS(OMAP2420_32KSYNCT_BASE + 0x010) ENTRY(omap242x_sram_ddr_init_sz) .word . - omap242x_sram_ddr_init @@ -224,7 +224,7 @@ omap242x_srs_prcm_voltctrl: ddr_prcm_mask_val: .word 0xFFFF3FFC omap242x_srs_timer_32ksynct: - .word OMAP2_IO_ADDRESS(OMAP2420_32KSYNCT_BASE + 0x010) + .word OMAP2_L4_IO_ADDRESS(OMAP2420_32KSYNCT_BASE + 0x010) ENTRY(omap242x_sram_reprogram_sdrc_sz) .word . - omap242x_sram_reprogram_sdrc diff --git a/arch/arm/mach-omap2/sram243x.S b/arch/arm/mach-omap2/sram243x.S index df2cd9277c00..ab4973695c71 100644 --- a/arch/arm/mach-omap2/sram243x.S +++ b/arch/arm/mach-omap2/sram243x.S @@ -128,7 +128,7 @@ omap243x_sdi_prcm_voltctrl: prcm_mask_val: .word 0xFFFF3FFC omap243x_sdi_timer_32ksynct_cr: - .word OMAP2_IO_ADDRESS(OMAP2430_32KSYNCT_BASE + 0x010) + .word OMAP2_L4_IO_ADDRESS(OMAP2430_32KSYNCT_BASE + 0x010) ENTRY(omap243x_sram_ddr_init_sz) .word . - omap243x_sram_ddr_init @@ -224,7 +224,7 @@ omap243x_srs_prcm_voltctrl: ddr_prcm_mask_val: .word 0xFFFF3FFC omap243x_srs_timer_32ksynct: - .word OMAP2_IO_ADDRESS(OMAP2430_32KSYNCT_BASE + 0x010) + .word OMAP2_L4_IO_ADDRESS(OMAP2430_32KSYNCT_BASE + 0x010) ENTRY(omap243x_sram_reprogram_sdrc_sz) .word . - omap243x_sram_reprogram_sdrc diff --git a/arch/arm/mach-omap2/timer-gp.c b/arch/arm/mach-omap2/timer-gp.c index e2338c0aebcf..df2b7094de98 100644 --- a/arch/arm/mach-omap2/timer-gp.c +++ b/arch/arm/mach-omap2/timer-gp.c @@ -37,7 +37,7 @@ #include <linux/clockchips.h> #include <asm/mach/time.h> -#include <mach/dmtimer.h> +#include <plat/dmtimer.h> #include <asm/localtimer.h> /* MAX_GPTIMER_ID: number of GPTIMERs on the chip */ @@ -231,7 +231,8 @@ static void __init omap2_gp_clocksource_init(void) static void __init omap2_gp_timer_init(void) { #ifdef CONFIG_LOCAL_TIMERS - twd_base = OMAP2_IO_ADDRESS(OMAP44XX_LOCAL_TWD_BASE); + twd_base = ioremap(OMAP44XX_LOCAL_TWD_BASE, SZ_256); + BUG_ON(!twd_base); #endif omap_dm_timer_init(); diff --git a/arch/arm/mach-omap2/usb-musb.c b/arch/arm/mach-omap2/usb-musb.c index 1145a2562b0f..a80441dd19b8 100644 --- a/arch/arm/mach-omap2/usb-musb.c +++ b/arch/arm/mach-omap2/usb-musb.c @@ -28,8 +28,8 @@ #include <mach/hardware.h> #include <mach/irqs.h> -#include <mach/mux.h> -#include <mach/usb.h> +#include <plat/mux.h> +#include <plat/usb.h> #ifdef CONFIG_USB_MUSB_SOC diff --git a/arch/arm/mach-omap2/usb-tusb6010.c b/arch/arm/mach-omap2/usb-tusb6010.c index 8622c24cd270..10a2013c1104 100644 --- a/arch/arm/mach-omap2/usb-tusb6010.c +++ b/arch/arm/mach-omap2/usb-tusb6010.c @@ -16,8 +16,8 @@ #include <linux/usb/musb.h> -#include <mach/gpmc.h> -#include <mach/mux.h> +#include <plat/gpmc.h> +#include <plat/mux.h> static u8 async_cs, sync_cs; diff --git a/arch/arm/plat-omap/clock.c b/arch/arm/plat-omap/clock.c index bf880e966d3b..681bfc37ebb2 100644 --- a/arch/arm/plat-omap/clock.c +++ b/arch/arm/plat-omap/clock.c @@ -24,7 +24,7 @@ #include <linux/debugfs.h> #include <linux/io.h> -#include <mach/clock.h> +#include <plat/clock.h> static LIST_HEAD(clocks); static DEFINE_MUTEX(clocks_mutex); diff --git a/arch/arm/plat-omap/common.c b/arch/arm/plat-omap/common.c index 3a4768d55895..cc050b3313bd 100644 --- a/arch/arm/plat-omap/common.c +++ b/arch/arm/plat-omap/common.c @@ -29,13 +29,13 @@ #include <asm/mach/map.h> #include <asm/setup.h> -#include <mach/common.h> -#include <mach/board.h> -#include <mach/control.h> -#include <mach/mux.h> -#include <mach/fpga.h> +#include <plat/common.h> +#include <plat/board.h> +#include <plat/control.h> +#include <plat/mux.h> +#include <plat/fpga.h> -#include <mach/clock.h> +#include <plat/clock.h> #if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3) # include "../mach-omap2/sdrc.h" @@ -49,6 +49,9 @@ int omap_bootloader_tag_len; struct omap_board_config_kernel *omap_board_config; int omap_board_config_size; +/* used by omap-smp.c and board-4430sdp.c */ +void __iomem *gic_cpu_base_addr; + static const void *get_config(u16 tag, size_t len, int skip, size_t *len_out) { struct omap_board_config_kernel *kinfo = NULL; @@ -224,12 +227,12 @@ static void __init __omap2_set_globals(struct omap_globals *omap2_globals) static struct omap_globals omap242x_globals = { .class = OMAP242X_CLASS, - .tap = OMAP2_IO_ADDRESS(0x48014000), - .sdrc = OMAP2_IO_ADDRESS(OMAP2420_SDRC_BASE), - .sms = OMAP2_IO_ADDRESS(OMAP2420_SMS_BASE), - .ctrl = OMAP2_IO_ADDRESS(OMAP2420_CTRL_BASE), - .prm = OMAP2_IO_ADDRESS(OMAP2420_PRM_BASE), - .cm = OMAP2_IO_ADDRESS(OMAP2420_CM_BASE), + .tap = OMAP2_L4_IO_ADDRESS(0x48014000), + .sdrc = OMAP2_L3_IO_ADDRESS(OMAP2420_SDRC_BASE), + .sms = OMAP2_L3_IO_ADDRESS(OMAP2420_SMS_BASE), + .ctrl = OMAP2_L4_IO_ADDRESS(OMAP2420_CTRL_BASE), + .prm = OMAP2_L4_IO_ADDRESS(OMAP2420_PRM_BASE), + .cm = OMAP2_L4_IO_ADDRESS(OMAP2420_CM_BASE), }; void __init omap2_set_globals_242x(void) @@ -242,12 +245,12 @@ void __init omap2_set_globals_242x(void) static struct omap_globals omap243x_globals = { .class = OMAP243X_CLASS, - .tap = OMAP2_IO_ADDRESS(0x4900a000), - .sdrc = OMAP2_IO_ADDRESS(OMAP243X_SDRC_BASE), - .sms = OMAP2_IO_ADDRESS(OMAP243X_SMS_BASE), - .ctrl = OMAP2_IO_ADDRESS(OMAP243X_CTRL_BASE), - .prm = OMAP2_IO_ADDRESS(OMAP2430_PRM_BASE), - .cm = OMAP2_IO_ADDRESS(OMAP2430_CM_BASE), + .tap = OMAP2_L4_IO_ADDRESS(0x4900a000), + .sdrc = OMAP2_L3_IO_ADDRESS(OMAP243X_SDRC_BASE), + .sms = OMAP2_L3_IO_ADDRESS(OMAP243X_SMS_BASE), + .ctrl = OMAP2_L4_IO_ADDRESS(OMAP243X_CTRL_BASE), + .prm = OMAP2_L4_IO_ADDRESS(OMAP2430_PRM_BASE), + .cm = OMAP2_L4_IO_ADDRESS(OMAP2430_CM_BASE), }; void __init omap2_set_globals_243x(void) @@ -260,12 +263,12 @@ void __init omap2_set_globals_243x(void) static struct omap_globals omap343x_globals = { .class = OMAP343X_CLASS, - .tap = OMAP2_IO_ADDRESS(0x4830A000), - .sdrc = OMAP2_IO_ADDRESS(OMAP343X_SDRC_BASE), - .sms = OMAP2_IO_ADDRESS(OMAP343X_SMS_BASE), - .ctrl = OMAP2_IO_ADDRESS(OMAP343X_CTRL_BASE), - .prm = OMAP2_IO_ADDRESS(OMAP3430_PRM_BASE), - .cm = OMAP2_IO_ADDRESS(OMAP3430_CM_BASE), + .tap = OMAP2_L4_IO_ADDRESS(0x4830A000), + .sdrc = OMAP2_L3_IO_ADDRESS(OMAP343X_SDRC_BASE), + .sms = OMAP2_L3_IO_ADDRESS(OMAP343X_SMS_BASE), + .ctrl = OMAP2_L4_IO_ADDRESS(OMAP343X_CTRL_BASE), + .prm = OMAP2_L4_IO_ADDRESS(OMAP3430_PRM_BASE), + .cm = OMAP2_L4_IO_ADDRESS(OMAP3430_CM_BASE), }; void __init omap2_set_globals_343x(void) @@ -277,10 +280,10 @@ void __init omap2_set_globals_343x(void) #if defined(CONFIG_ARCH_OMAP4) static struct omap_globals omap4_globals = { .class = OMAP443X_CLASS, - .tap = OMAP2_IO_ADDRESS(0x4830a000), - .ctrl = OMAP2_IO_ADDRESS(OMAP443X_CTRL_BASE), - .prm = OMAP2_IO_ADDRESS(OMAP4430_PRM_BASE), - .cm = OMAP2_IO_ADDRESS(OMAP4430_CM_BASE), + .tap = OMAP2_L4_IO_ADDRESS(0x4830a000), + .ctrl = OMAP2_L4_IO_ADDRESS(OMAP443X_CTRL_BASE), + .prm = OMAP2_L4_IO_ADDRESS(OMAP4430_PRM_BASE), + .cm = OMAP2_L4_IO_ADDRESS(OMAP4430_CM_BASE), }; void __init omap2_set_globals_443x(void) diff --git a/arch/arm/plat-omap/cpu-omap.c b/arch/arm/plat-omap/cpu-omap.c index 1868c0d8f9b5..4e85389c861a 100644 --- a/arch/arm/plat-omap/cpu-omap.c +++ b/arch/arm/plat-omap/cpu-omap.c @@ -23,7 +23,7 @@ #include <linux/io.h> #include <mach/hardware.h> -#include <mach/clock.h> +#include <plat/clock.h> #include <asm/system.h> #define VERY_HI_RATE 900000000 diff --git a/arch/arm/plat-omap/debug-devices.c b/arch/arm/plat-omap/debug-devices.c index f6684832ca8f..09c1107637f6 100644 --- a/arch/arm/plat-omap/debug-devices.c +++ b/arch/arm/plat-omap/debug-devices.c @@ -16,7 +16,7 @@ #include <mach/hardware.h> -#include <mach/board.h> +#include <plat/board.h> #include <mach/gpio.h> diff --git a/arch/arm/plat-omap/debug-leds.c b/arch/arm/plat-omap/debug-leds.c index 9395898dd49a..6c768b71ad64 100644 --- a/arch/arm/plat-omap/debug-leds.c +++ b/arch/arm/plat-omap/debug-leds.c @@ -18,7 +18,7 @@ #include <asm/system.h> #include <asm/mach-types.h> -#include <mach/fpga.h> +#include <plat/fpga.h> #include <mach/gpio.h> diff --git a/arch/arm/plat-omap/devices.c b/arch/arm/plat-omap/devices.c index a64b692a1bfe..f86617869b38 100644 --- a/arch/arm/plat-omap/devices.c +++ b/arch/arm/plat-omap/devices.c @@ -19,15 +19,15 @@ #include <asm/mach-types.h> #include <asm/mach/map.h> -#include <mach/tc.h> -#include <mach/control.h> -#include <mach/board.h> -#include <mach/mmc.h> -#include <mach/mux.h> +#include <plat/tc.h> +#include <plat/control.h> +#include <plat/board.h> +#include <plat/mmc.h> +#include <plat/mux.h> #include <mach/gpio.h> -#include <mach/menelaus.h> -#include <mach/mcbsp.h> -#include <mach/dsp_common.h> +#include <plat/menelaus.h> +#include <plat/mcbsp.h> +#include <plat/dsp_common.h> #if defined(CONFIG_OMAP_DSP) || defined(CONFIG_OMAP_DSP_MODULE) @@ -113,17 +113,17 @@ static void omap_init_kp(void) omap_cfg_reg(E19_1610_KBR4); omap_cfg_reg(N19_1610_KBR5); } else if (machine_is_omap_perseus2() || machine_is_omap_fsample()) { - omap_cfg_reg(E2_730_KBR0); - omap_cfg_reg(J7_730_KBR1); - omap_cfg_reg(E1_730_KBR2); - omap_cfg_reg(F3_730_KBR3); - omap_cfg_reg(D2_730_KBR4); - - omap_cfg_reg(C2_730_KBC0); - omap_cfg_reg(D3_730_KBC1); - omap_cfg_reg(E4_730_KBC2); - omap_cfg_reg(F4_730_KBC3); - omap_cfg_reg(E3_730_KBC4); + omap_cfg_reg(E2_7XX_KBR0); + omap_cfg_reg(J7_7XX_KBR1); + omap_cfg_reg(E1_7XX_KBR2); + omap_cfg_reg(F3_7XX_KBR3); + omap_cfg_reg(D2_7XX_KBR4); + + omap_cfg_reg(C2_7XX_KBC0); + omap_cfg_reg(D3_7XX_KBC1); + omap_cfg_reg(E4_7XX_KBC2); + omap_cfg_reg(F4_7XX_KBC3); + omap_cfg_reg(E3_7XX_KBC4); } else if (machine_is_omap_h4()) { omap_cfg_reg(T19_24XX_KBR0); omap_cfg_reg(R19_24XX_KBR1); diff --git a/arch/arm/plat-omap/dma.c b/arch/arm/plat-omap/dma.c index b53125f41293..3edffde7f439 100644 --- a/arch/arm/plat-omap/dma.c +++ b/arch/arm/plat-omap/dma.c @@ -32,9 +32,9 @@ #include <asm/system.h> #include <mach/hardware.h> -#include <mach/dma.h> +#include <plat/dma.h> -#include <mach/tc.h> +#include <plat/tc.h> #undef DEBUG @@ -2345,40 +2345,46 @@ EXPORT_SYMBOL(omap_stop_lcd_dma); static int __init omap_init_dma(void) { + unsigned long base; int ch, r; if (cpu_class_is_omap1()) { - omap_dma_base = OMAP1_IO_ADDRESS(OMAP1_DMA_BASE); + base = OMAP1_DMA_BASE; dma_lch_count = OMAP1_LOGICAL_DMA_CH_COUNT; } else if (cpu_is_omap24xx()) { - omap_dma_base = OMAP2_IO_ADDRESS(OMAP24XX_DMA4_BASE); + base = OMAP24XX_DMA4_BASE; dma_lch_count = OMAP_DMA4_LOGICAL_DMA_CH_COUNT; } else if (cpu_is_omap34xx()) { - omap_dma_base = OMAP2_IO_ADDRESS(OMAP34XX_DMA4_BASE); + base = OMAP34XX_DMA4_BASE; dma_lch_count = OMAP_DMA4_LOGICAL_DMA_CH_COUNT; } else if (cpu_is_omap44xx()) { - omap_dma_base = OMAP2_IO_ADDRESS(OMAP44XX_DMA4_BASE); + base = OMAP44XX_DMA4_BASE; dma_lch_count = OMAP_DMA4_LOGICAL_DMA_CH_COUNT; } else { pr_err("DMA init failed for unsupported omap\n"); return -ENODEV; } + omap_dma_base = ioremap(base, SZ_4K); + BUG_ON(!omap_dma_base); + if (cpu_class_is_omap2() && omap_dma_reserve_channels && (omap_dma_reserve_channels <= dma_lch_count)) dma_lch_count = omap_dma_reserve_channels; dma_chan = kzalloc(sizeof(struct omap_dma_lch) * dma_lch_count, GFP_KERNEL); - if (!dma_chan) - return -ENOMEM; + if (!dma_chan) { + r = -ENOMEM; + goto out_unmap; + } if (cpu_class_is_omap2()) { dma_linked_lch = kzalloc(sizeof(struct dma_link_info) * dma_lch_count, GFP_KERNEL); if (!dma_linked_lch) { - kfree(dma_chan); - return -ENOMEM; + r = -ENOMEM; + goto out_free; } } @@ -2452,7 +2458,7 @@ static int __init omap_init_dma(void) for (i = 0; i < ch; i++) free_irq(omap1_dma_irq[i], (void *) (i + 1)); - return r; + goto out_free; } } } @@ -2494,11 +2500,19 @@ static int __init omap_init_dma(void) "(error %d)\n", r); for (i = 0; i < dma_chan_count; i++) free_irq(omap1_dma_irq[i], (void *) (i + 1)); - return r; + goto out_free; } } return 0; + +out_free: + kfree(dma_chan); + +out_unmap: + iounmap(omap_dma_base); + + return r; } arch_initcall(omap_init_dma); diff --git a/arch/arm/plat-omap/dmtimer.c b/arch/arm/plat-omap/dmtimer.c index d325b54daeb5..64f407ee0f4e 100644 --- a/arch/arm/plat-omap/dmtimer.c +++ b/arch/arm/plat-omap/dmtimer.c @@ -38,7 +38,7 @@ #include <linux/io.h> #include <linux/module.h> #include <mach/hardware.h> -#include <mach/dmtimer.h> +#include <plat/dmtimer.h> #include <mach/irqs.h> /* register offsets */ @@ -742,16 +742,17 @@ EXPORT_SYMBOL_GPL(omap_dm_timers_active); int __init omap_dm_timer_init(void) { struct omap_dm_timer *timer; - int i; + int i, map_size = SZ_8K; /* Module 4KB + L4 4KB except on omap1 */ if (!(cpu_is_omap16xx() || cpu_class_is_omap2())) return -ENODEV; spin_lock_init(&dm_timer_lock); - if (cpu_class_is_omap1()) + if (cpu_class_is_omap1()) { dm_timers = omap1_dm_timers; - else if (cpu_is_omap24xx()) { + map_size = SZ_2K; + } else if (cpu_is_omap24xx()) { dm_timers = omap2_dm_timers; dm_source_names = omap2_dm_source_names; dm_source_clocks = omap2_dm_source_clocks; @@ -774,10 +775,11 @@ int __init omap_dm_timer_init(void) for (i = 0; i < dm_timer_count; i++) { timer = &dm_timers[i]; - if (cpu_class_is_omap1()) - timer->io_base = OMAP1_IO_ADDRESS(timer->phys_base); - else - timer->io_base = OMAP2_IO_ADDRESS(timer->phys_base); + + /* Static mapping, never released */ + timer->io_base = ioremap(timer->phys_base, map_size); + BUG_ON(!timer->io_base); + #if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3) || \ defined(CONFIG_ARCH_OMAP4) if (cpu_class_is_omap2()) { diff --git a/arch/arm/plat-omap/fb.c b/arch/arm/plat-omap/fb.c index 3746222bed10..78a4ce538dbd 100644 --- a/arch/arm/plat-omap/fb.c +++ b/arch/arm/plat-omap/fb.c @@ -32,9 +32,9 @@ #include <mach/hardware.h> #include <asm/mach/map.h> -#include <mach/board.h> -#include <mach/sram.h> -#include <mach/omapfb.h> +#include <plat/board.h> +#include <plat/sram.h> +#include <plat/omapfb.h> #if defined(CONFIG_FB_OMAP) || defined(CONFIG_FB_OMAP_MODULE) diff --git a/arch/arm/plat-omap/gpio.c b/arch/arm/plat-omap/gpio.c index 71ebd7fcfea1..35a59ce5a2b4 100644 --- a/arch/arm/plat-omap/gpio.c +++ b/arch/arm/plat-omap/gpio.c @@ -31,7 +31,7 @@ /* * OMAP1510 GPIO registers */ -#define OMAP1510_GPIO_BASE OMAP1_IO_ADDRESS(0xfffce000) +#define OMAP1510_GPIO_BASE 0xfffce000 #define OMAP1510_GPIO_DATA_INPUT 0x00 #define OMAP1510_GPIO_DATA_OUTPUT 0x04 #define OMAP1510_GPIO_DIR_CONTROL 0x08 @@ -45,10 +45,10 @@ /* * OMAP1610 specific GPIO registers */ -#define OMAP1610_GPIO1_BASE OMAP1_IO_ADDRESS(0xfffbe400) -#define OMAP1610_GPIO2_BASE OMAP1_IO_ADDRESS(0xfffbec00) -#define OMAP1610_GPIO3_BASE OMAP1_IO_ADDRESS(0xfffbb400) -#define OMAP1610_GPIO4_BASE OMAP1_IO_ADDRESS(0xfffbbc00) +#define OMAP1610_GPIO1_BASE 0xfffbe400 +#define OMAP1610_GPIO2_BASE 0xfffbec00 +#define OMAP1610_GPIO3_BASE 0xfffbb400 +#define OMAP1610_GPIO4_BASE 0xfffbbc00 #define OMAP1610_GPIO_REVISION 0x0000 #define OMAP1610_GPIO_SYSCONFIG 0x0010 #define OMAP1610_GPIO_SYSSTATUS 0x0014 @@ -68,52 +68,36 @@ #define OMAP1610_GPIO_SET_DATAOUT 0x00f0 /* - * OMAP730 specific GPIO registers + * OMAP7XX specific GPIO registers */ -#define OMAP730_GPIO1_BASE OMAP1_IO_ADDRESS(0xfffbc000) -#define OMAP730_GPIO2_BASE OMAP1_IO_ADDRESS(0xfffbc800) -#define OMAP730_GPIO3_BASE OMAP1_IO_ADDRESS(0xfffbd000) -#define OMAP730_GPIO4_BASE OMAP1_IO_ADDRESS(0xfffbd800) -#define OMAP730_GPIO5_BASE OMAP1_IO_ADDRESS(0xfffbe000) -#define OMAP730_GPIO6_BASE OMAP1_IO_ADDRESS(0xfffbe800) -#define OMAP730_GPIO_DATA_INPUT 0x00 -#define OMAP730_GPIO_DATA_OUTPUT 0x04 -#define OMAP730_GPIO_DIR_CONTROL 0x08 -#define OMAP730_GPIO_INT_CONTROL 0x0c -#define OMAP730_GPIO_INT_MASK 0x10 -#define OMAP730_GPIO_INT_STATUS 0x14 - -/* - * OMAP850 specific GPIO registers - */ -#define OMAP850_GPIO1_BASE OMAP1_IO_ADDRESS(0xfffbc000) -#define OMAP850_GPIO2_BASE OMAP1_IO_ADDRESS(0xfffbc800) -#define OMAP850_GPIO3_BASE OMAP1_IO_ADDRESS(0xfffbd000) -#define OMAP850_GPIO4_BASE OMAP1_IO_ADDRESS(0xfffbd800) -#define OMAP850_GPIO5_BASE OMAP1_IO_ADDRESS(0xfffbe000) -#define OMAP850_GPIO6_BASE OMAP1_IO_ADDRESS(0xfffbe800) -#define OMAP850_GPIO_DATA_INPUT 0x00 -#define OMAP850_GPIO_DATA_OUTPUT 0x04 -#define OMAP850_GPIO_DIR_CONTROL 0x08 -#define OMAP850_GPIO_INT_CONTROL 0x0c -#define OMAP850_GPIO_INT_MASK 0x10 -#define OMAP850_GPIO_INT_STATUS 0x14 - -#define OMAP1_MPUIO_VBASE OMAP1_IO_ADDRESS(OMAP1_MPUIO_BASE) +#define OMAP7XX_GPIO1_BASE 0xfffbc000 +#define OMAP7XX_GPIO2_BASE 0xfffbc800 +#define OMAP7XX_GPIO3_BASE 0xfffbd000 +#define OMAP7XX_GPIO4_BASE 0xfffbd800 +#define OMAP7XX_GPIO5_BASE 0xfffbe000 +#define OMAP7XX_GPIO6_BASE 0xfffbe800 +#define OMAP7XX_GPIO_DATA_INPUT 0x00 +#define OMAP7XX_GPIO_DATA_OUTPUT 0x04 +#define OMAP7XX_GPIO_DIR_CONTROL 0x08 +#define OMAP7XX_GPIO_INT_CONTROL 0x0c +#define OMAP7XX_GPIO_INT_MASK 0x10 +#define OMAP7XX_GPIO_INT_STATUS 0x14 + +#define OMAP1_MPUIO_VBASE OMAP1_MPUIO_BASE /* * omap24xx specific GPIO registers */ -#define OMAP242X_GPIO1_BASE OMAP2_IO_ADDRESS(0x48018000) -#define OMAP242X_GPIO2_BASE OMAP2_IO_ADDRESS(0x4801a000) -#define OMAP242X_GPIO3_BASE OMAP2_IO_ADDRESS(0x4801c000) -#define OMAP242X_GPIO4_BASE OMAP2_IO_ADDRESS(0x4801e000) +#define OMAP242X_GPIO1_BASE 0x48018000 +#define OMAP242X_GPIO2_BASE 0x4801a000 +#define OMAP242X_GPIO3_BASE 0x4801c000 +#define OMAP242X_GPIO4_BASE 0x4801e000 -#define OMAP243X_GPIO1_BASE OMAP2_IO_ADDRESS(0x4900C000) -#define OMAP243X_GPIO2_BASE OMAP2_IO_ADDRESS(0x4900E000) -#define OMAP243X_GPIO3_BASE OMAP2_IO_ADDRESS(0x49010000) -#define OMAP243X_GPIO4_BASE OMAP2_IO_ADDRESS(0x49012000) -#define OMAP243X_GPIO5_BASE OMAP2_IO_ADDRESS(0x480B6000) +#define OMAP243X_GPIO1_BASE 0x4900C000 +#define OMAP243X_GPIO2_BASE 0x4900E000 +#define OMAP243X_GPIO3_BASE 0x49010000 +#define OMAP243X_GPIO4_BASE 0x49012000 +#define OMAP243X_GPIO5_BASE 0x480B6000 #define OMAP24XX_GPIO_REVISION 0x0000 #define OMAP24XX_GPIO_SYSCONFIG 0x0010 @@ -170,24 +154,25 @@ * omap34xx specific GPIO registers */ -#define OMAP34XX_GPIO1_BASE OMAP2_IO_ADDRESS(0x48310000) -#define OMAP34XX_GPIO2_BASE OMAP2_IO_ADDRESS(0x49050000) -#define OMAP34XX_GPIO3_BASE OMAP2_IO_ADDRESS(0x49052000) -#define OMAP34XX_GPIO4_BASE OMAP2_IO_ADDRESS(0x49054000) -#define OMAP34XX_GPIO5_BASE OMAP2_IO_ADDRESS(0x49056000) -#define OMAP34XX_GPIO6_BASE OMAP2_IO_ADDRESS(0x49058000) +#define OMAP34XX_GPIO1_BASE 0x48310000 +#define OMAP34XX_GPIO2_BASE 0x49050000 +#define OMAP34XX_GPIO3_BASE 0x49052000 +#define OMAP34XX_GPIO4_BASE 0x49054000 +#define OMAP34XX_GPIO5_BASE 0x49056000 +#define OMAP34XX_GPIO6_BASE 0x49058000 /* * OMAP44XX specific GPIO registers */ -#define OMAP44XX_GPIO1_BASE OMAP2_IO_ADDRESS(0x4a310000) -#define OMAP44XX_GPIO2_BASE OMAP2_IO_ADDRESS(0x48055000) -#define OMAP44XX_GPIO3_BASE OMAP2_IO_ADDRESS(0x48057000) -#define OMAP44XX_GPIO4_BASE OMAP2_IO_ADDRESS(0x48059000) -#define OMAP44XX_GPIO5_BASE OMAP2_IO_ADDRESS(0x4805B000) -#define OMAP44XX_GPIO6_BASE OMAP2_IO_ADDRESS(0x4805D000) +#define OMAP44XX_GPIO1_BASE 0x4a310000 +#define OMAP44XX_GPIO2_BASE 0x48055000 +#define OMAP44XX_GPIO3_BASE 0x48057000 +#define OMAP44XX_GPIO4_BASE 0x48059000 +#define OMAP44XX_GPIO5_BASE 0x4805B000 +#define OMAP44XX_GPIO6_BASE 0x4805D000 struct gpio_bank { + unsigned long pbase; void __iomem *base; u16 irq; u16 virtual_irq_start; @@ -215,96 +200,111 @@ struct gpio_bank { #define METHOD_MPUIO 0 #define METHOD_GPIO_1510 1 #define METHOD_GPIO_1610 2 -#define METHOD_GPIO_730 3 -#define METHOD_GPIO_850 4 +#define METHOD_GPIO_7XX 3 #define METHOD_GPIO_24XX 5 #ifdef CONFIG_ARCH_OMAP16XX static struct gpio_bank gpio_bank_1610[5] = { - { OMAP1_MPUIO_VBASE, INT_MPUIO, IH_MPUIO_BASE, METHOD_MPUIO}, - { OMAP1610_GPIO1_BASE, INT_GPIO_BANK1, IH_GPIO_BASE, METHOD_GPIO_1610 }, - { OMAP1610_GPIO2_BASE, INT_1610_GPIO_BANK2, IH_GPIO_BASE + 16, METHOD_GPIO_1610 }, - { OMAP1610_GPIO3_BASE, INT_1610_GPIO_BANK3, IH_GPIO_BASE + 32, METHOD_GPIO_1610 }, - { OMAP1610_GPIO4_BASE, INT_1610_GPIO_BANK4, IH_GPIO_BASE + 48, METHOD_GPIO_1610 }, + { OMAP1_MPUIO_VBASE, NULL, INT_MPUIO, IH_MPUIO_BASE, + METHOD_MPUIO }, + { OMAP1610_GPIO1_BASE, NULL, INT_GPIO_BANK1, IH_GPIO_BASE, + METHOD_GPIO_1610 }, + { OMAP1610_GPIO2_BASE, NULL, INT_1610_GPIO_BANK2, IH_GPIO_BASE + 16, + METHOD_GPIO_1610 }, + { OMAP1610_GPIO3_BASE, NULL, INT_1610_GPIO_BANK3, IH_GPIO_BASE + 32, + METHOD_GPIO_1610 }, + { OMAP1610_GPIO4_BASE, NULL, INT_1610_GPIO_BANK4, IH_GPIO_BASE + 48, + METHOD_GPIO_1610 }, }; #endif #ifdef CONFIG_ARCH_OMAP15XX static struct gpio_bank gpio_bank_1510[2] = { - { OMAP1_MPUIO_VBASE, INT_MPUIO, IH_MPUIO_BASE, METHOD_MPUIO }, - { OMAP1510_GPIO_BASE, INT_GPIO_BANK1, IH_GPIO_BASE, METHOD_GPIO_1510 } -}; -#endif - -#ifdef CONFIG_ARCH_OMAP730 -static struct gpio_bank gpio_bank_730[7] = { - { OMAP1_MPUIO_VBASE, INT_730_MPUIO, IH_MPUIO_BASE, METHOD_MPUIO }, - { OMAP730_GPIO1_BASE, INT_730_GPIO_BANK1, IH_GPIO_BASE, METHOD_GPIO_730 }, - { OMAP730_GPIO2_BASE, INT_730_GPIO_BANK2, IH_GPIO_BASE + 32, METHOD_GPIO_730 }, - { OMAP730_GPIO3_BASE, INT_730_GPIO_BANK3, IH_GPIO_BASE + 64, METHOD_GPIO_730 }, - { OMAP730_GPIO4_BASE, INT_730_GPIO_BANK4, IH_GPIO_BASE + 96, METHOD_GPIO_730 }, - { OMAP730_GPIO5_BASE, INT_730_GPIO_BANK5, IH_GPIO_BASE + 128, METHOD_GPIO_730 }, - { OMAP730_GPIO6_BASE, INT_730_GPIO_BANK6, IH_GPIO_BASE + 160, METHOD_GPIO_730 }, + { OMAP1_MPUIO_VBASE, NULL, INT_MPUIO, IH_MPUIO_BASE, + METHOD_MPUIO }, + { OMAP1510_GPIO_BASE, NULL, INT_GPIO_BANK1, IH_GPIO_BASE, + METHOD_GPIO_1510 } }; #endif -#ifdef CONFIG_ARCH_OMAP850 -static struct gpio_bank gpio_bank_850[7] = { - { OMAP1_MPUIO_VBASE, INT_850_MPUIO, IH_MPUIO_BASE, METHOD_MPUIO }, - { OMAP850_GPIO1_BASE, INT_850_GPIO_BANK1, IH_GPIO_BASE, METHOD_GPIO_850 }, - { OMAP850_GPIO2_BASE, INT_850_GPIO_BANK2, IH_GPIO_BASE + 32, METHOD_GPIO_850 }, - { OMAP850_GPIO3_BASE, INT_850_GPIO_BANK3, IH_GPIO_BASE + 64, METHOD_GPIO_850 }, - { OMAP850_GPIO4_BASE, INT_850_GPIO_BANK4, IH_GPIO_BASE + 96, METHOD_GPIO_850 }, - { OMAP850_GPIO5_BASE, INT_850_GPIO_BANK5, IH_GPIO_BASE + 128, METHOD_GPIO_850 }, - { OMAP850_GPIO6_BASE, INT_850_GPIO_BANK6, IH_GPIO_BASE + 160, METHOD_GPIO_850 }, +#if defined(CONFIG_ARCH_OMAP730) || defined(CONFIG_ARCH_OMAP850) +static struct gpio_bank gpio_bank_7xx[7] = { + { OMAP1_MPUIO_VBASE, NULL, INT_7XX_MPUIO, IH_MPUIO_BASE, + METHOD_MPUIO }, + { OMAP7XX_GPIO1_BASE, NULL, INT_7XX_GPIO_BANK1, IH_GPIO_BASE, + METHOD_GPIO_7XX }, + { OMAP7XX_GPIO2_BASE, NULL, INT_7XX_GPIO_BANK2, IH_GPIO_BASE + 32, + METHOD_GPIO_7XX }, + { OMAP7XX_GPIO3_BASE, NULL, INT_7XX_GPIO_BANK3, IH_GPIO_BASE + 64, + METHOD_GPIO_7XX }, + { OMAP7XX_GPIO4_BASE, NULL, INT_7XX_GPIO_BANK4, IH_GPIO_BASE + 96, + METHOD_GPIO_7XX }, + { OMAP7XX_GPIO5_BASE, NULL, INT_7XX_GPIO_BANK5, IH_GPIO_BASE + 128, + METHOD_GPIO_7XX }, + { OMAP7XX_GPIO6_BASE, NULL, INT_7XX_GPIO_BANK6, IH_GPIO_BASE + 160, + METHOD_GPIO_7XX }, }; #endif - #ifdef CONFIG_ARCH_OMAP24XX static struct gpio_bank gpio_bank_242x[4] = { - { OMAP242X_GPIO1_BASE, INT_24XX_GPIO_BANK1, IH_GPIO_BASE, METHOD_GPIO_24XX }, - { OMAP242X_GPIO2_BASE, INT_24XX_GPIO_BANK2, IH_GPIO_BASE + 32, METHOD_GPIO_24XX }, - { OMAP242X_GPIO3_BASE, INT_24XX_GPIO_BANK3, IH_GPIO_BASE + 64, METHOD_GPIO_24XX }, - { OMAP242X_GPIO4_BASE, INT_24XX_GPIO_BANK4, IH_GPIO_BASE + 96, METHOD_GPIO_24XX }, + { OMAP242X_GPIO1_BASE, NULL, INT_24XX_GPIO_BANK1, IH_GPIO_BASE, + METHOD_GPIO_24XX }, + { OMAP242X_GPIO2_BASE, NULL, INT_24XX_GPIO_BANK2, IH_GPIO_BASE + 32, + METHOD_GPIO_24XX }, + { OMAP242X_GPIO3_BASE, NULL, INT_24XX_GPIO_BANK3, IH_GPIO_BASE + 64, + METHOD_GPIO_24XX }, + { OMAP242X_GPIO4_BASE, NULL, INT_24XX_GPIO_BANK4, IH_GPIO_BASE + 96, + METHOD_GPIO_24XX }, }; static struct gpio_bank gpio_bank_243x[5] = { - { OMAP243X_GPIO1_BASE, INT_24XX_GPIO_BANK1, IH_GPIO_BASE, METHOD_GPIO_24XX }, - { OMAP243X_GPIO2_BASE, INT_24XX_GPIO_BANK2, IH_GPIO_BASE + 32, METHOD_GPIO_24XX }, - { OMAP243X_GPIO3_BASE, INT_24XX_GPIO_BANK3, IH_GPIO_BASE + 64, METHOD_GPIO_24XX }, - { OMAP243X_GPIO4_BASE, INT_24XX_GPIO_BANK4, IH_GPIO_BASE + 96, METHOD_GPIO_24XX }, - { OMAP243X_GPIO5_BASE, INT_24XX_GPIO_BANK5, IH_GPIO_BASE + 128, METHOD_GPIO_24XX }, + { OMAP243X_GPIO1_BASE, NULL, INT_24XX_GPIO_BANK1, IH_GPIO_BASE, + METHOD_GPIO_24XX }, + { OMAP243X_GPIO2_BASE, NULL, INT_24XX_GPIO_BANK2, IH_GPIO_BASE + 32, + METHOD_GPIO_24XX }, + { OMAP243X_GPIO3_BASE, NULL, INT_24XX_GPIO_BANK3, IH_GPIO_BASE + 64, + METHOD_GPIO_24XX }, + { OMAP243X_GPIO4_BASE, NULL, INT_24XX_GPIO_BANK4, IH_GPIO_BASE + 96, + METHOD_GPIO_24XX }, + { OMAP243X_GPIO5_BASE, NULL, INT_24XX_GPIO_BANK5, IH_GPIO_BASE + 128, + METHOD_GPIO_24XX }, }; #endif #ifdef CONFIG_ARCH_OMAP34XX static struct gpio_bank gpio_bank_34xx[6] = { - { OMAP34XX_GPIO1_BASE, INT_34XX_GPIO_BANK1, IH_GPIO_BASE, METHOD_GPIO_24XX }, - { OMAP34XX_GPIO2_BASE, INT_34XX_GPIO_BANK2, IH_GPIO_BASE + 32, METHOD_GPIO_24XX }, - { OMAP34XX_GPIO3_BASE, INT_34XX_GPIO_BANK3, IH_GPIO_BASE + 64, METHOD_GPIO_24XX }, - { OMAP34XX_GPIO4_BASE, INT_34XX_GPIO_BANK4, IH_GPIO_BASE + 96, METHOD_GPIO_24XX }, - { OMAP34XX_GPIO5_BASE, INT_34XX_GPIO_BANK5, IH_GPIO_BASE + 128, METHOD_GPIO_24XX }, - { OMAP34XX_GPIO6_BASE, INT_34XX_GPIO_BANK6, IH_GPIO_BASE + 160, METHOD_GPIO_24XX }, + { OMAP34XX_GPIO1_BASE, NULL, INT_34XX_GPIO_BANK1, IH_GPIO_BASE, + METHOD_GPIO_24XX }, + { OMAP34XX_GPIO2_BASE, NULL, INT_34XX_GPIO_BANK2, IH_GPIO_BASE + 32, + METHOD_GPIO_24XX }, + { OMAP34XX_GPIO3_BASE, NULL, INT_34XX_GPIO_BANK3, IH_GPIO_BASE + 64, + METHOD_GPIO_24XX }, + { OMAP34XX_GPIO4_BASE, NULL, INT_34XX_GPIO_BANK4, IH_GPIO_BASE + 96, + METHOD_GPIO_24XX }, + { OMAP34XX_GPIO5_BASE, NULL, INT_34XX_GPIO_BANK5, IH_GPIO_BASE + 128, + METHOD_GPIO_24XX }, + { OMAP34XX_GPIO6_BASE, NULL, INT_34XX_GPIO_BANK6, IH_GPIO_BASE + 160, + METHOD_GPIO_24XX }, }; #endif #ifdef CONFIG_ARCH_OMAP4 static struct gpio_bank gpio_bank_44xx[6] = { - { OMAP44XX_GPIO1_BASE, INT_44XX_GPIO_BANK1, IH_GPIO_BASE, \ + { OMAP44XX_GPIO1_BASE, NULL, INT_44XX_GPIO_BANK1, IH_GPIO_BASE, METHOD_GPIO_24XX }, - { OMAP44XX_GPIO2_BASE, INT_44XX_GPIO_BANK2, IH_GPIO_BASE + 32, \ + { OMAP44XX_GPIO2_BASE, NULL, INT_44XX_GPIO_BANK2, IH_GPIO_BASE + 32, METHOD_GPIO_24XX }, - { OMAP44XX_GPIO3_BASE, INT_44XX_GPIO_BANK3, IH_GPIO_BASE + 64, \ + { OMAP44XX_GPIO3_BASE, NULL, INT_44XX_GPIO_BANK3, IH_GPIO_BASE + 64, METHOD_GPIO_24XX }, - { OMAP44XX_GPIO4_BASE, INT_44XX_GPIO_BANK4, IH_GPIO_BASE + 96, \ + { OMAP44XX_GPIO4_BASE, NULL, INT_44XX_GPIO_BANK4, IH_GPIO_BASE + 96, METHOD_GPIO_24XX }, - { OMAP44XX_GPIO5_BASE, INT_44XX_GPIO_BANK5, IH_GPIO_BASE + 128, \ + { OMAP44XX_GPIO5_BASE, NULL, INT_44XX_GPIO_BANK5, IH_GPIO_BASE + 128, METHOD_GPIO_24XX }, - { OMAP44XX_GPIO6_BASE, INT_44XX_GPIO_BANK6, IH_GPIO_BASE + 160, \ + { OMAP44XX_GPIO6_BASE, NULL, INT_44XX_GPIO_BANK6, IH_GPIO_BASE + 160, METHOD_GPIO_24XX }, }; @@ -402,14 +402,9 @@ static void _set_gpio_direction(struct gpio_bank *bank, int gpio, int is_input) reg += OMAP1610_GPIO_DIRECTION; break; #endif -#ifdef CONFIG_ARCH_OMAP730 - case METHOD_GPIO_730: - reg += OMAP730_GPIO_DIR_CONTROL; - break; -#endif -#ifdef CONFIG_ARCH_OMAP850 - case METHOD_GPIO_850: - reg += OMAP850_GPIO_DIR_CONTROL; +#if defined(CONFIG_ARCH_OMAP730) || defined(CONFIG_ARCH_OMAP850) + case METHOD_GPIO_7XX: + reg += OMAP7XX_GPIO_DIR_CONTROL; break; #endif #if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX) @@ -469,19 +464,9 @@ static void _set_gpio_dataout(struct gpio_bank *bank, int gpio, int enable) l = 1 << gpio; break; #endif -#ifdef CONFIG_ARCH_OMAP730 - case METHOD_GPIO_730: - reg += OMAP730_GPIO_DATA_OUTPUT; - l = __raw_readl(reg); - if (enable) - l |= 1 << gpio; - else - l &= ~(1 << gpio); - break; -#endif -#ifdef CONFIG_ARCH_OMAP850 - case METHOD_GPIO_850: - reg += OMAP850_GPIO_DATA_OUTPUT; +#if defined(CONFIG_ARCH_OMAP730) || defined(CONFIG_ARCH_OMAP850) + case METHOD_GPIO_7XX: + reg += OMAP7XX_GPIO_DATA_OUTPUT; l = __raw_readl(reg); if (enable) l |= 1 << gpio; @@ -537,14 +522,9 @@ static int _get_gpio_datain(struct gpio_bank *bank, int gpio) reg += OMAP1610_GPIO_DATAIN; break; #endif -#ifdef CONFIG_ARCH_OMAP730 - case METHOD_GPIO_730: - reg += OMAP730_GPIO_DATA_INPUT; - break; -#endif -#ifdef CONFIG_ARCH_OMAP850 - case METHOD_GPIO_850: - reg += OMAP850_GPIO_DATA_INPUT; +#if defined(CONFIG_ARCH_OMAP730) || defined(CONFIG_ARCH_OMAP850) + case METHOD_GPIO_7XX: + reg += OMAP7XX_GPIO_DATA_INPUT; break; #endif #if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX) @@ -588,14 +568,9 @@ static int _get_gpio_dataout(struct gpio_bank *bank, int gpio) reg += OMAP1610_GPIO_DATAOUT; break; #endif -#ifdef CONFIG_ARCH_OMAP730 - case METHOD_GPIO_730: - reg += OMAP730_GPIO_DATA_OUTPUT; - break; -#endif -#ifdef CONFIG_ARCH_OMAP850 - case METHOD_GPIO_850: - reg += OMAP850_GPIO_DATA_OUTPUT; +#if defined(CONFIG_ARCH_OMAP730) || defined(CONFIG_ARCH_OMAP850) + case METHOD_GPIO_7XX: + reg += OMAP7XX_GPIO_DATA_OUTPUT; break; #endif #if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX) || \ @@ -797,21 +772,9 @@ static int _set_gpio_triggering(struct gpio_bank *bank, int gpio, int trigger) __raw_writel(1 << gpio, bank->base + OMAP1610_GPIO_CLEAR_WAKEUPENA); break; #endif -#ifdef CONFIG_ARCH_OMAP730 - case METHOD_GPIO_730: - reg += OMAP730_GPIO_INT_CONTROL; - l = __raw_readl(reg); - if (trigger & IRQ_TYPE_EDGE_RISING) - l |= 1 << gpio; - else if (trigger & IRQ_TYPE_EDGE_FALLING) - l &= ~(1 << gpio); - else - goto bad; - break; -#endif -#ifdef CONFIG_ARCH_OMAP850 - case METHOD_GPIO_850: - reg += OMAP850_GPIO_INT_CONTROL; +#if defined(CONFIG_ARCH_OMAP730) || defined(CONFIG_ARCH_OMAP850) + case METHOD_GPIO_7XX: + reg += OMAP7XX_GPIO_INT_CONTROL; l = __raw_readl(reg); if (trigger & IRQ_TYPE_EDGE_RISING) l |= 1 << gpio; @@ -897,14 +860,9 @@ static void _clear_gpio_irqbank(struct gpio_bank *bank, int gpio_mask) reg += OMAP1610_GPIO_IRQSTATUS1; break; #endif -#ifdef CONFIG_ARCH_OMAP730 - case METHOD_GPIO_730: - reg += OMAP730_GPIO_INT_STATUS; - break; -#endif -#ifdef CONFIG_ARCH_OMAP850 - case METHOD_GPIO_850: - reg += OMAP850_GPIO_INT_STATUS; +#if defined(CONFIG_ARCH_OMAP730) || defined(CONFIG_ARCH_OMAP850) + case METHOD_GPIO_7XX: + reg += OMAP7XX_GPIO_INT_STATUS; break; #endif #if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX) @@ -971,16 +929,9 @@ static u32 _get_gpio_irqbank_mask(struct gpio_bank *bank) mask = 0xffff; break; #endif -#ifdef CONFIG_ARCH_OMAP730 - case METHOD_GPIO_730: - reg += OMAP730_GPIO_INT_MASK; - mask = 0xffffffff; - inv = 1; - break; -#endif -#ifdef CONFIG_ARCH_OMAP850 - case METHOD_GPIO_850: - reg += OMAP850_GPIO_INT_MASK; +#if defined(CONFIG_ARCH_OMAP730) || defined(CONFIG_ARCH_OMAP850) + case METHOD_GPIO_7XX: + reg += OMAP7XX_GPIO_INT_MASK; mask = 0xffffffff; inv = 1; break; @@ -1044,19 +995,9 @@ static void _enable_gpio_irqbank(struct gpio_bank *bank, int gpio_mask, int enab l = gpio_mask; break; #endif -#ifdef CONFIG_ARCH_OMAP730 - case METHOD_GPIO_730: - reg += OMAP730_GPIO_INT_MASK; - l = __raw_readl(reg); - if (enable) - l &= ~(gpio_mask); - else - l |= gpio_mask; - break; -#endif -#ifdef CONFIG_ARCH_OMAP850 - case METHOD_GPIO_850: - reg += OMAP850_GPIO_INT_MASK; +#if defined(CONFIG_ARCH_OMAP730) || defined(CONFIG_ARCH_OMAP850) + case METHOD_GPIO_7XX: + reg += OMAP7XX_GPIO_INT_MASK; l = __raw_readl(reg); if (enable) l &= ~(gpio_mask); @@ -1249,13 +1190,9 @@ static void gpio_irq_handler(unsigned int irq, struct irq_desc *desc) if (bank->method == METHOD_GPIO_1610) isr_reg = bank->base + OMAP1610_GPIO_IRQSTATUS1; #endif -#ifdef CONFIG_ARCH_OMAP730 - if (bank->method == METHOD_GPIO_730) - isr_reg = bank->base + OMAP730_GPIO_INT_STATUS; -#endif -#ifdef CONFIG_ARCH_OMAP850 - if (bank->method == METHOD_GPIO_850) - isr_reg = bank->base + OMAP850_GPIO_INT_STATUS; +#if defined(CONFIG_ARCH_OMAP730) || defined(CONFIG_ARCH_OMAP850) + if (bank->method == METHOD_GPIO_7XX) + isr_reg = bank->base + OMAP7XX_GPIO_INT_STATUS; #endif #if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX) if (bank->method == METHOD_GPIO_24XX) @@ -1524,11 +1461,8 @@ static int gpio_is_input(struct gpio_bank *bank, int mask) case METHOD_GPIO_1610: reg += OMAP1610_GPIO_DIRECTION; break; - case METHOD_GPIO_730: - reg += OMAP730_GPIO_DIR_CONTROL; - break; - case METHOD_GPIO_850: - reg += OMAP850_GPIO_DIR_CONTROL; + case METHOD_GPIO_7XX: + reg += OMAP7XX_GPIO_DIR_CONTROL; break; case METHOD_GPIO_24XX: reg += OMAP24XX_GPIO_OE; @@ -1607,6 +1541,23 @@ static struct clk * gpio5_fck; static struct clk *gpio_iclks[OMAP34XX_NR_GPIOS]; #endif +static void __init omap_gpio_show_rev(void) +{ + u32 rev; + + if (cpu_is_omap16xx()) + rev = __raw_readw(gpio_bank[1].base + OMAP1610_GPIO_REVISION); + else if (cpu_is_omap24xx() || cpu_is_omap34xx()) + rev = __raw_readl(gpio_bank[0].base + OMAP24XX_GPIO_REVISION); + else if (cpu_is_omap44xx()) + rev = __raw_readl(gpio_bank[0].base + OMAP4_GPIO_REVISION); + else + return; + + printk(KERN_INFO "OMAP GPIO hardware version %d.%d\n", + (rev >> 4) & 0x0f, rev & 0x0f); +} + /* This lock class tells lockdep that GPIO irqs are in a different * category than their parents, so it won't report false recursion. */ @@ -1617,6 +1568,7 @@ static int __init _omap_gpio_init(void) int i; int gpio = 0; struct gpio_bank *bank; + int bank_size = SZ_8K; /* Module 4KB + L4 4KB except on omap1 */ char clk_name[11]; initialized = 1; @@ -1679,77 +1631,45 @@ static int __init _omap_gpio_init(void) #ifdef CONFIG_ARCH_OMAP15XX if (cpu_is_omap15xx()) { - printk(KERN_INFO "OMAP1510 GPIO hardware\n"); gpio_bank_count = 2; gpio_bank = gpio_bank_1510; + bank_size = SZ_2K; } #endif #if defined(CONFIG_ARCH_OMAP16XX) if (cpu_is_omap16xx()) { - u32 rev; - gpio_bank_count = 5; gpio_bank = gpio_bank_1610; - rev = __raw_readw(gpio_bank[1].base + OMAP1610_GPIO_REVISION); - printk(KERN_INFO "OMAP GPIO hardware version %d.%d\n", - (rev >> 4) & 0x0f, rev & 0x0f); + bank_size = SZ_2K; } #endif -#ifdef CONFIG_ARCH_OMAP730 - if (cpu_is_omap730()) { - printk(KERN_INFO "OMAP730 GPIO hardware\n"); - gpio_bank_count = 7; - gpio_bank = gpio_bank_730; - } -#endif -#ifdef CONFIG_ARCH_OMAP850 - if (cpu_is_omap850()) { - printk(KERN_INFO "OMAP850 GPIO hardware\n"); +#if defined(CONFIG_ARCH_OMAP730) || defined(CONFIG_ARCH_OMAP850) + if (cpu_is_omap7xx()) { gpio_bank_count = 7; - gpio_bank = gpio_bank_850; + gpio_bank = gpio_bank_7xx; + bank_size = SZ_2K; } #endif - #ifdef CONFIG_ARCH_OMAP24XX if (cpu_is_omap242x()) { - int rev; - gpio_bank_count = 4; gpio_bank = gpio_bank_242x; - rev = __raw_readl(gpio_bank[0].base + OMAP24XX_GPIO_REVISION); - printk(KERN_INFO "OMAP242x GPIO hardware version %d.%d\n", - (rev >> 4) & 0x0f, rev & 0x0f); } if (cpu_is_omap243x()) { - int rev; - gpio_bank_count = 5; gpio_bank = gpio_bank_243x; - rev = __raw_readl(gpio_bank[0].base + OMAP24XX_GPIO_REVISION); - printk(KERN_INFO "OMAP243x GPIO hardware version %d.%d\n", - (rev >> 4) & 0x0f, rev & 0x0f); } #endif #ifdef CONFIG_ARCH_OMAP34XX if (cpu_is_omap34xx()) { - int rev; - gpio_bank_count = OMAP34XX_NR_GPIOS; gpio_bank = gpio_bank_34xx; - rev = __raw_readl(gpio_bank[0].base + OMAP24XX_GPIO_REVISION); - printk(KERN_INFO "OMAP34xx GPIO hardware version %d.%d\n", - (rev >> 4) & 0x0f, rev & 0x0f); } #endif #ifdef CONFIG_ARCH_OMAP4 if (cpu_is_omap44xx()) { - int rev; - gpio_bank_count = OMAP34XX_NR_GPIOS; gpio_bank = gpio_bank_44xx; - rev = __raw_readl(gpio_bank[0].base + OMAP4_GPIO_REVISION); - printk(KERN_INFO "OMAP44xx GPIO hardware version %d.%d\n", - (rev >> 4) & 0x0f, rev & 0x0f); } #endif for (i = 0; i < gpio_bank_count; i++) { @@ -1757,6 +1677,14 @@ static int __init _omap_gpio_init(void) bank = &gpio_bank[i]; spin_lock_init(&bank->lock); + + /* Static mapping, never released */ + bank->base = ioremap(bank->pbase, bank_size); + if (!bank->base) { + printk(KERN_ERR "Could not ioremap gpio bank%i\n", i); + continue; + } + if (bank_is_mpuio(bank)) __raw_writew(0xffff, bank->base + OMAP_MPUIO_GPIO_MASKIT); if (cpu_is_omap15xx() && bank->method == METHOD_GPIO_1510) { @@ -1768,11 +1696,11 @@ static int __init _omap_gpio_init(void) __raw_writew(0xffff, bank->base + OMAP1610_GPIO_IRQSTATUS1); __raw_writew(0x0014, bank->base + OMAP1610_GPIO_SYSCONFIG); } - if (cpu_is_omap7xx() && bank->method == METHOD_GPIO_730) { - __raw_writel(0xffffffff, bank->base + OMAP730_GPIO_INT_MASK); - __raw_writel(0x00000000, bank->base + OMAP730_GPIO_INT_STATUS); + if (cpu_is_omap7xx() && bank->method == METHOD_GPIO_7XX) { + __raw_writel(0xffffffff, bank->base + OMAP7XX_GPIO_INT_MASK); + __raw_writel(0x00000000, bank->base + OMAP7XX_GPIO_INT_STATUS); - gpio_count = 32; /* 730 has 32-bit GPIOs */ + gpio_count = 32; /* 7xx has 32-bit GPIOs */ } #if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX) || \ @@ -1862,6 +1790,8 @@ static int __init _omap_gpio_init(void) if (cpu_is_omap34xx()) omap_writel(1 << 0, 0x48306814); + omap_gpio_show_rev(); + return 0; } @@ -2160,8 +2090,7 @@ static int dbg_gpio_show(struct seq_file *s, void *unused) if (bank_is_mpuio(bank)) gpio = OMAP_MPUIO(0); - else if (cpu_class_is_omap2() || cpu_is_omap730() || - cpu_is_omap850()) + else if (cpu_class_is_omap2() || cpu_is_omap7xx()) bankwidth = 32; for (j = 0; j < bankwidth; j++, gpio++, mask <<= 1) { diff --git a/arch/arm/plat-omap/i2c.c b/arch/arm/plat-omap/i2c.c index 8b848391f0c8..c08362dbb8ed 100644 --- a/arch/arm/plat-omap/i2c.c +++ b/arch/arm/plat-omap/i2c.c @@ -27,7 +27,7 @@ #include <linux/platform_device.h> #include <linux/i2c.h> #include <mach/irqs.h> -#include <mach/mux.h> +#include <plat/mux.h> #define OMAP_I2C_SIZE 0x3f #define OMAP1_I2C_BASE 0xfffb3800 diff --git a/arch/arm/plat-omap/include/mach/blizzard.h b/arch/arm/plat-omap/include/plat/blizzard.h index 8d160f171372..8d160f171372 100644 --- a/arch/arm/plat-omap/include/mach/blizzard.h +++ b/arch/arm/plat-omap/include/plat/blizzard.h diff --git a/arch/arm/plat-omap/include/mach/board-ams-delta.h b/arch/arm/plat-omap/include/plat/board-ams-delta.h index 51b102dc906b..51b102dc906b 100644 --- a/arch/arm/plat-omap/include/mach/board-ams-delta.h +++ b/arch/arm/plat-omap/include/plat/board-ams-delta.h diff --git a/arch/arm/plat-omap/include/mach/board-sx1.h b/arch/arm/plat-omap/include/plat/board-sx1.h index 355adbdaae33..355adbdaae33 100644 --- a/arch/arm/plat-omap/include/mach/board-sx1.h +++ b/arch/arm/plat-omap/include/plat/board-sx1.h diff --git a/arch/arm/plat-omap/include/mach/board-voiceblue.h b/arch/arm/plat-omap/include/plat/board-voiceblue.h index 27916b210f57..27916b210f57 100644 --- a/arch/arm/plat-omap/include/mach/board-voiceblue.h +++ b/arch/arm/plat-omap/include/plat/board-voiceblue.h diff --git a/arch/arm/plat-omap/include/mach/board.h b/arch/arm/plat-omap/include/plat/board.h index 8e913c322810..c4fc69f09796 100644 --- a/arch/arm/plat-omap/include/mach/board.h +++ b/arch/arm/plat-omap/include/plat/board.h @@ -12,7 +12,7 @@ #include <linux/types.h> -#include <mach/gpio-switch.h> +#include <plat/gpio-switch.h> /* Different peripheral ids */ #define OMAP_TAG_CLOCK 0x4f01 diff --git a/arch/arm/plat-omap/include/mach/clkdev.h b/arch/arm/plat-omap/include/plat/clkdev.h index 730c49d1ebd8..730c49d1ebd8 100644 --- a/arch/arm/plat-omap/include/mach/clkdev.h +++ b/arch/arm/plat-omap/include/plat/clkdev.h diff --git a/arch/arm/plat-omap/include/mach/clock.h b/arch/arm/plat-omap/include/plat/clock.h index 4b8b0d65cbf2..4b8b0d65cbf2 100644 --- a/arch/arm/plat-omap/include/mach/clock.h +++ b/arch/arm/plat-omap/include/plat/clock.h diff --git a/arch/arm/plat-omap/include/mach/clockdomain.h b/arch/arm/plat-omap/include/plat/clockdomain.h index 99ebd886f134..eb734826e64e 100644 --- a/arch/arm/plat-omap/include/mach/clockdomain.h +++ b/arch/arm/plat-omap/include/plat/clockdomain.h @@ -16,9 +16,9 @@ #ifndef __ASM_ARM_ARCH_OMAP_CLOCKDOMAIN_H #define __ASM_ARM_ARCH_OMAP_CLOCKDOMAIN_H -#include <mach/powerdomain.h> -#include <mach/clock.h> -#include <mach/cpu.h> +#include <plat/powerdomain.h> +#include <plat/clock.h> +#include <plat/cpu.h> /* Clockdomain capability flags */ #define CLKDM_CAN_FORCE_SLEEP (1 << 0) diff --git a/arch/arm/plat-omap/include/mach/common.h b/arch/arm/plat-omap/include/plat/common.h index fdeab421b4dc..064f1730f43b 100644 --- a/arch/arm/plat-omap/include/mach/common.h +++ b/arch/arm/plat-omap/include/plat/common.h @@ -31,6 +31,9 @@ struct sys_timer; +/* used by omap-smp.c and board-4430sdp.c */ +extern void __iomem *gic_cpu_base_addr; + extern void omap_map_common_io(void); extern struct sys_timer omap_timer; #if defined(CONFIG_I2C_OMAP) || defined(CONFIG_I2C_OMAP_MODULE) diff --git a/arch/arm/plat-omap/include/mach/control.h b/arch/arm/plat-omap/include/plat/control.h index 826d317cdbec..805819f3a868 100644 --- a/arch/arm/plat-omap/include/mach/control.h +++ b/arch/arm/plat-omap/include/plat/control.h @@ -20,15 +20,18 @@ #ifndef __ASSEMBLY__ #define OMAP242X_CTRL_REGADDR(reg) \ - OMAP2_IO_ADDRESS(OMAP242X_CTRL_BASE + (reg)) + OMAP2_L4_IO_ADDRESS(OMAP242X_CTRL_BASE + (reg)) #define OMAP243X_CTRL_REGADDR(reg) \ - OMAP2_IO_ADDRESS(OMAP243X_CTRL_BASE + (reg)) + OMAP2_L4_IO_ADDRESS(OMAP243X_CTRL_BASE + (reg)) #define OMAP343X_CTRL_REGADDR(reg) \ - OMAP2_IO_ADDRESS(OMAP343X_CTRL_BASE + (reg)) + OMAP2_L4_IO_ADDRESS(OMAP343X_CTRL_BASE + (reg)) #else -#define OMAP242X_CTRL_REGADDR(reg) OMAP2_IO_ADDRESS(OMAP242X_CTRL_BASE + (reg)) -#define OMAP243X_CTRL_REGADDR(reg) OMAP2_IO_ADDRESS(OMAP243X_CTRL_BASE + (reg)) -#define OMAP343X_CTRL_REGADDR(reg) OMAP2_IO_ADDRESS(OMAP343X_CTRL_BASE + (reg)) +#define OMAP242X_CTRL_REGADDR(reg) \ + OMAP2_L4_IO_ADDRESS(OMAP242X_CTRL_BASE + (reg)) +#define OMAP243X_CTRL_REGADDR(reg) \ + OMAP2_L4_IO_ADDRESS(OMAP243X_CTRL_BASE + (reg)) +#define OMAP343X_CTRL_REGADDR(reg) \ + OMAP2_L4_IO_ADDRESS(OMAP343X_CTRL_BASE + (reg)) #endif /* __ASSEMBLY__ */ /* diff --git a/arch/arm/plat-omap/include/mach/cpu.h b/arch/arm/plat-omap/include/plat/cpu.h index f129efb3075e..f129efb3075e 100644 --- a/arch/arm/plat-omap/include/mach/cpu.h +++ b/arch/arm/plat-omap/include/plat/cpu.h diff --git a/arch/arm/plat-omap/include/mach/dma.h b/arch/arm/plat-omap/include/plat/dma.h index 72f680b7180d..72f680b7180d 100644 --- a/arch/arm/plat-omap/include/mach/dma.h +++ b/arch/arm/plat-omap/include/plat/dma.h diff --git a/arch/arm/plat-omap/include/mach/dmtimer.h b/arch/arm/plat-omap/include/plat/dmtimer.h index 20f1054c0a80..20f1054c0a80 100644 --- a/arch/arm/plat-omap/include/mach/dmtimer.h +++ b/arch/arm/plat-omap/include/plat/dmtimer.h diff --git a/arch/arm/plat-omap/include/mach/dsp_common.h b/arch/arm/plat-omap/include/plat/dsp_common.h index da97736f3efa..da97736f3efa 100644 --- a/arch/arm/plat-omap/include/mach/dsp_common.h +++ b/arch/arm/plat-omap/include/plat/dsp_common.h diff --git a/arch/arm/plat-omap/include/mach/fpga.h b/arch/arm/plat-omap/include/plat/fpga.h index f1864a652f7a..f1864a652f7a 100644 --- a/arch/arm/plat-omap/include/mach/fpga.h +++ b/arch/arm/plat-omap/include/plat/fpga.h diff --git a/arch/arm/plat-omap/include/mach/gpio-switch.h b/arch/arm/plat-omap/include/plat/gpio-switch.h index 10da0e07c0cf..10da0e07c0cf 100644 --- a/arch/arm/plat-omap/include/mach/gpio-switch.h +++ b/arch/arm/plat-omap/include/plat/gpio-switch.h diff --git a/arch/arm/plat-omap/include/mach/gpio.h b/arch/arm/plat-omap/include/plat/gpio.h index 633ff688b928..633ff688b928 100644 --- a/arch/arm/plat-omap/include/mach/gpio.h +++ b/arch/arm/plat-omap/include/plat/gpio.h diff --git a/arch/arm/plat-omap/include/mach/gpmc-smc91x.h b/arch/arm/plat-omap/include/plat/gpmc-smc91x.h index b64fbee4d567..b64fbee4d567 100644 --- a/arch/arm/plat-omap/include/mach/gpmc-smc91x.h +++ b/arch/arm/plat-omap/include/plat/gpmc-smc91x.h diff --git a/arch/arm/plat-omap/include/mach/gpmc.h b/arch/arm/plat-omap/include/plat/gpmc.h index 9c99cda77ba6..9c99cda77ba6 100644 --- a/arch/arm/plat-omap/include/mach/gpmc.h +++ b/arch/arm/plat-omap/include/plat/gpmc.h diff --git a/arch/arm/plat-omap/include/mach/hardware.h b/arch/arm/plat-omap/include/plat/hardware.h index 26c1fbff08aa..d5b26adfb890 100644 --- a/arch/arm/plat-omap/include/mach/hardware.h +++ b/arch/arm/plat-omap/include/plat/hardware.h @@ -39,9 +39,9 @@ #include <asm/sizes.h> #ifndef __ASSEMBLER__ #include <asm/types.h> -#include <mach/cpu.h> +#include <plat/cpu.h> #endif -#include <mach/serial.h> +#include <plat/serial.h> /* * --------------------------------------------------------------------------- @@ -280,11 +280,11 @@ * --------------------------------------------------------------------------- */ -#include "omap730.h" -#include "omap1510.h" -#include "omap16xx.h" -#include "omap24xx.h" -#include "omap34xx.h" -#include "omap44xx.h" +#include <plat/omap7xx.h> +#include <plat/omap1510.h> +#include <plat/omap16xx.h> +#include <plat/omap24xx.h> +#include <plat/omap34xx.h> +#include <plat/omap44xx.h> #endif /* __ASM_ARCH_OMAP_HARDWARE_H */ diff --git a/arch/arm/plat-omap/include/mach/hwa742.h b/arch/arm/plat-omap/include/plat/hwa742.h index 886248d32b49..886248d32b49 100644 --- a/arch/arm/plat-omap/include/mach/hwa742.h +++ b/arch/arm/plat-omap/include/plat/hwa742.h diff --git a/arch/arm/plat-omap/include/mach/io.h b/arch/arm/plat-omap/include/plat/io.h index 8d32df32b0b1..7e5319f907d1 100644 --- a/arch/arm/plat-omap/include/mach/io.h +++ b/arch/arm/plat-omap/include/plat/io.h @@ -63,8 +63,24 @@ #define OMAP1_IO_OFFSET 0x01000000 /* Virtual IO = 0xfefb0000 */ #define OMAP1_IO_ADDRESS(pa) IOMEM((pa) - OMAP1_IO_OFFSET) -#define OMAP2_IO_OFFSET 0x90000000 -#define OMAP2_IO_ADDRESS(pa) IOMEM((pa) + OMAP2_IO_OFFSET) /* L3 and L4 */ +#define OMAP2_L3_IO_OFFSET 0x90000000 +#define OMAP2_L3_IO_ADDRESS(pa) IOMEM((pa) + OMAP2_L3_IO_OFFSET) /* L3 */ + + +#define OMAP2_L4_IO_OFFSET 0xb2000000 +#define OMAP2_L4_IO_ADDRESS(pa) IOMEM((pa) + OMAP2_L4_IO_OFFSET) /* L4 */ + +#define OMAP4_L3_IO_OFFSET 0xb4000000 +#define OMAP4_L3_IO_ADDRESS(pa) IOMEM((pa) + OMAP4_L3_IO_OFFSET) /* L3 */ + +#define OMAP4_L3_PER_IO_OFFSET 0xb1100000 +#define OMAP4_L3_PER_IO_ADDRESS(pa) IOMEM((pa) + OMAP4_L3_PER_IO_OFFSET) + +#define OMAP4_GPMC_IO_OFFSET 0xa9000000 +#define OMAP4_GPMC_IO_ADDRESS(pa) IOMEM((pa) + OMAP4_GPMC_IO_OFFSET) + +#define OMAP2_EMU_IO_OFFSET 0xaa800000 /* Emulation */ +#define OMAP2_EMU_IO_ADDRESS(pa) IOMEM((pa) + OMAP2_EMU_IO_OFFSET) /* * ---------------------------------------------------------------------------- @@ -83,24 +99,27 @@ */ /* We map both L3 and L4 on OMAP2 */ -#define L3_24XX_PHYS L3_24XX_BASE /* 0x68000000 */ -#define L3_24XX_VIRT 0xf8000000 +#define L3_24XX_PHYS L3_24XX_BASE /* 0x68000000 --> 0xf8000000*/ +#define L3_24XX_VIRT (L3_24XX_PHYS + OMAP2_L3_IO_OFFSET) #define L3_24XX_SIZE SZ_1M /* 44kB of 128MB used, want 1MB sect */ -#define L4_24XX_PHYS L4_24XX_BASE /* 0x48000000 */ -#define L4_24XX_VIRT 0xd8000000 +#define L4_24XX_PHYS L4_24XX_BASE /* 0x48000000 --> 0xfa000000 */ +#define L4_24XX_VIRT (L4_24XX_PHYS + OMAP2_L4_IO_OFFSET) #define L4_24XX_SIZE SZ_1M /* 1MB of 128MB used, want 1MB sect */ -#define L4_WK_243X_PHYS L4_WK_243X_BASE /* 0x49000000 */ -#define L4_WK_243X_VIRT 0xd9000000 +#define L4_WK_243X_PHYS L4_WK_243X_BASE /* 0x49000000 --> 0xfb000000 */ +#define L4_WK_243X_VIRT (L4_WK_243X_PHYS + OMAP2_L4_IO_OFFSET) #define L4_WK_243X_SIZE SZ_1M -#define OMAP243X_GPMC_PHYS OMAP243X_GPMC_BASE /* 0x49000000 */ -#define OMAP243X_GPMC_VIRT 0xFE000000 +#define OMAP243X_GPMC_PHYS OMAP243X_GPMC_BASE +#define OMAP243X_GPMC_VIRT (OMAP243X_GPMC_PHYS + OMAP2_L3_IO_OFFSET) + /* 0x6e000000 --> 0xfe000000 */ #define OMAP243X_GPMC_SIZE SZ_1M #define OMAP243X_SDRC_PHYS OMAP243X_SDRC_BASE -#define OMAP243X_SDRC_VIRT 0xFD000000 + /* 0x6D000000 --> 0xfd000000 */ +#define OMAP243X_SDRC_VIRT (OMAP243X_SDRC_PHYS + OMAP2_L3_IO_OFFSET) #define OMAP243X_SDRC_SIZE SZ_1M #define OMAP243X_SMS_PHYS OMAP243X_SMS_BASE -#define OMAP243X_SMS_VIRT 0xFC000000 + /* 0x6c000000 --> 0xfc000000 */ +#define OMAP243X_SMS_VIRT (OMAP243X_SMS_PHYS + OMAP2_L3_IO_OFFSET) #define OMAP243X_SMS_SIZE SZ_1M /* DSP */ @@ -121,12 +140,12 @@ */ /* We map both L3 and L4 on OMAP3 */ -#define L3_34XX_PHYS L3_34XX_BASE /* 0x68000000 */ -#define L3_34XX_VIRT 0xf8000000 +#define L3_34XX_PHYS L3_34XX_BASE /* 0x68000000 --> 0xf8000000 */ +#define L3_34XX_VIRT (L3_34XX_PHYS + OMAP2_L3_IO_OFFSET) #define L3_34XX_SIZE SZ_1M /* 44kB of 128MB used, want 1MB sect */ -#define L4_34XX_PHYS L4_34XX_BASE /* 0x48000000 */ -#define L4_34XX_VIRT 0xd8000000 +#define L4_34XX_PHYS L4_34XX_BASE /* 0x48000000 --> 0xfa000000 */ +#define L4_34XX_VIRT (L4_34XX_PHYS + OMAP2_L4_IO_OFFSET) #define L4_34XX_SIZE SZ_4M /* 1MB of 128MB used, want 1MB sect */ /* @@ -134,28 +153,33 @@ * VPOM3430 was not working for Int controller */ -#define L4_WK_34XX_PHYS L4_WK_34XX_BASE /* 0x48300000 */ -#define L4_WK_34XX_VIRT 0xd8300000 +#define L4_WK_34XX_PHYS L4_WK_34XX_BASE /* 0x48300000 --> 0xfa300000 */ +#define L4_WK_34XX_VIRT (L4_WK_34XX_PHYS + OMAP2_L4_IO_OFFSET) #define L4_WK_34XX_SIZE SZ_1M -#define L4_PER_34XX_PHYS L4_PER_34XX_BASE /* 0x49000000 */ -#define L4_PER_34XX_VIRT 0xd9000000 +#define L4_PER_34XX_PHYS L4_PER_34XX_BASE + /* 0x49000000 --> 0xfb000000 */ +#define L4_PER_34XX_VIRT (L4_PER_34XX_PHYS + OMAP2_L4_IO_OFFSET) #define L4_PER_34XX_SIZE SZ_1M -#define L4_EMU_34XX_PHYS L4_EMU_34XX_BASE /* 0x54000000 */ -#define L4_EMU_34XX_VIRT 0xe4000000 -#define L4_EMU_34XX_SIZE SZ_64M +#define L4_EMU_34XX_PHYS L4_EMU_34XX_BASE + /* 0x54000000 --> 0xfe800000 */ +#define L4_EMU_34XX_VIRT (L4_EMU_34XX_PHYS + OMAP2_EMU_IO_OFFSET) +#define L4_EMU_34XX_SIZE SZ_8M -#define OMAP34XX_GPMC_PHYS OMAP34XX_GPMC_BASE /* 0x6E000000 */ -#define OMAP34XX_GPMC_VIRT 0xFE000000 +#define OMAP34XX_GPMC_PHYS OMAP34XX_GPMC_BASE + /* 0x6e000000 --> 0xfe000000 */ +#define OMAP34XX_GPMC_VIRT (OMAP34XX_GPMC_PHYS + OMAP2_L3_IO_OFFSET) #define OMAP34XX_GPMC_SIZE SZ_1M -#define OMAP343X_SMS_PHYS OMAP343X_SMS_BASE /* 0x6C000000 */ -#define OMAP343X_SMS_VIRT 0xFC000000 +#define OMAP343X_SMS_PHYS OMAP343X_SMS_BASE + /* 0x6c000000 --> 0xfc000000 */ +#define OMAP343X_SMS_VIRT (OMAP343X_SMS_PHYS + OMAP2_L3_IO_OFFSET) #define OMAP343X_SMS_SIZE SZ_1M -#define OMAP343X_SDRC_PHYS OMAP343X_SDRC_BASE /* 0x6D000000 */ -#define OMAP343X_SDRC_VIRT 0xFD000000 +#define OMAP343X_SDRC_PHYS OMAP343X_SDRC_BASE + /* 0x6D000000 --> 0xfd000000 */ +#define OMAP343X_SDRC_VIRT (OMAP343X_SDRC_PHYS + OMAP2_L3_IO_OFFSET) #define OMAP343X_SDRC_SIZE SZ_1M /* DSP */ @@ -176,32 +200,54 @@ */ /* We map both L3 and L4 on OMAP4 */ -#define L3_44XX_PHYS L3_44XX_BASE -#define L3_44XX_VIRT 0xd4000000 +#define L3_44XX_PHYS L3_44XX_BASE /* 0x44000000 --> 0xf8000000 */ +#define L3_44XX_VIRT (L3_44XX_PHYS + OMAP4_L3_IO_OFFSET) #define L3_44XX_SIZE SZ_1M -#define L4_44XX_PHYS L4_44XX_BASE -#define L4_44XX_VIRT 0xda000000 +#define L4_44XX_PHYS L4_44XX_BASE /* 0x4a000000 --> 0xfc000000 */ +#define L4_44XX_VIRT (L4_44XX_PHYS + OMAP2_L4_IO_OFFSET) #define L4_44XX_SIZE SZ_4M -#define L4_WK_44XX_PHYS L4_WK_44XX_BASE -#define L4_WK_44XX_VIRT 0xda300000 +#define L4_WK_44XX_PHYS L4_WK_44XX_BASE /* 0x4a300000 --> 0xfc300000 */ +#define L4_WK_44XX_VIRT (L4_WK_44XX_PHYS + OMAP2_L4_IO_OFFSET) #define L4_WK_44XX_SIZE SZ_1M #define L4_PER_44XX_PHYS L4_PER_44XX_BASE -#define L4_PER_44XX_VIRT 0xd8000000 + /* 0x48000000 --> 0xfa000000 */ +#define L4_PER_44XX_VIRT (L4_PER_44XX_PHYS + OMAP2_L4_IO_OFFSET) #define L4_PER_44XX_SIZE SZ_4M +#define L4_ABE_44XX_PHYS L4_ABE_44XX_BASE + /* 0x49000000 --> 0xfb000000 */ +#define L4_ABE_44XX_VIRT (L4_ABE_44XX_PHYS + OMAP2_L4_IO_OFFSET) +#define L4_ABE_44XX_SIZE SZ_1M + #define L4_EMU_44XX_PHYS L4_EMU_44XX_BASE -#define L4_EMU_44XX_VIRT 0xe4000000 -#define L4_EMU_44XX_SIZE SZ_64M + /* 0x54000000 --> 0xfe800000 */ +#define L4_EMU_44XX_VIRT (L4_EMU_44XX_PHYS + OMAP2_EMU_IO_OFFSET) +#define L4_EMU_44XX_SIZE SZ_8M #define OMAP44XX_GPMC_PHYS OMAP44XX_GPMC_BASE -#define OMAP44XX_GPMC_VIRT 0xe0000000 + /* 0x50000000 --> 0xf9000000 */ +#define OMAP44XX_GPMC_VIRT (OMAP44XX_GPMC_PHYS + OMAP4_GPMC_IO_OFFSET) #define OMAP44XX_GPMC_SIZE SZ_1M +#define OMAP44XX_EMIF1_PHYS OMAP44XX_EMIF1_BASE + /* 0x4c000000 --> 0xfd100000 */ +#define OMAP44XX_EMIF1_VIRT (OMAP44XX_EMIF1_PHYS + OMAP4_L3_PER_IO_OFFSET) +#define OMAP44XX_EMIF1_SIZE SZ_1M + +#define OMAP44XX_EMIF2_PHYS OMAP44XX_EMIF2_BASE + /* 0x4d000000 --> 0xfd200000 */ +#define OMAP44XX_EMIF2_VIRT (OMAP44XX_EMIF2_PHYS + OMAP4_L3_PER_IO_OFFSET) +#define OMAP44XX_EMIF2_SIZE SZ_1M + +#define OMAP44XX_DMM_PHYS OMAP44XX_DMM_BASE + /* 0x4e000000 --> 0xfd300000 */ +#define OMAP44XX_DMM_VIRT (OMAP44XX_DMM_PHYS + OMAP4_L3_PER_IO_OFFSET) +#define OMAP44XX_DMM_SIZE SZ_1M /* * ---------------------------------------------------------------------------- * Omap specific register access diff --git a/arch/arm/plat-omap/include/mach/iommu.h b/arch/arm/plat-omap/include/plat/iommu.h index 46d41ac83dbf..0752af9d099e 100644 --- a/arch/arm/plat-omap/include/mach/iommu.h +++ b/arch/arm/plat-omap/include/plat/iommu.h @@ -107,7 +107,7 @@ struct iommu_platform_data { #if defined(CONFIG_ARCH_OMAP1) #error "iommu for this processor not implemented yet" #else -#include <mach/iommu2.h> +#include <plat/iommu2.h> #endif /* diff --git a/arch/arm/plat-omap/include/mach/iommu2.h b/arch/arm/plat-omap/include/plat/iommu2.h index 10ad05f410e9..10ad05f410e9 100644 --- a/arch/arm/plat-omap/include/mach/iommu2.h +++ b/arch/arm/plat-omap/include/plat/iommu2.h diff --git a/arch/arm/plat-omap/include/mach/iovmm.h b/arch/arm/plat-omap/include/plat/iovmm.h index bdc7ce5d7a4a..bdc7ce5d7a4a 100644 --- a/arch/arm/plat-omap/include/mach/iovmm.h +++ b/arch/arm/plat-omap/include/plat/iovmm.h diff --git a/arch/arm/plat-omap/include/mach/irda.h b/arch/arm/plat-omap/include/plat/irda.h index 40f60339d1c6..40f60339d1c6 100644 --- a/arch/arm/plat-omap/include/mach/irda.h +++ b/arch/arm/plat-omap/include/plat/irda.h diff --git a/arch/arm/plat-omap/include/mach/irqs.h b/arch/arm/plat-omap/include/plat/irqs.h index 28a165058b61..6a6d0281e1d5 100644 --- a/arch/arm/plat-omap/include/mach/irqs.h +++ b/arch/arm/plat-omap/include/plat/irqs.h @@ -86,49 +86,26 @@ #define INT_1610_SSR_FIFO_0 29 /* - * OMAP-730 specific IRQ numbers for interrupt handler 1 + * OMAP-7xx specific IRQ numbers for interrupt handler 1 */ -#define INT_730_IH2_FIQ 0 -#define INT_730_IH2_IRQ 1 -#define INT_730_USB_NON_ISO 2 -#define INT_730_USB_ISO 3 -#define INT_730_ICR 4 -#define INT_730_EAC 5 -#define INT_730_GPIO_BANK1 6 -#define INT_730_GPIO_BANK2 7 -#define INT_730_GPIO_BANK3 8 -#define INT_730_McBSP2TX 10 -#define INT_730_McBSP2RX 11 -#define INT_730_McBSP2RX_OVF 12 -#define INT_730_LCD_LINE 14 -#define INT_730_GSM_PROTECT 15 -#define INT_730_TIMER3 16 -#define INT_730_GPIO_BANK5 17 -#define INT_730_GPIO_BANK6 18 -#define INT_730_SPGIO_WR 29 - -/* - * OMAP-850 specific IRQ numbers for interrupt handler 1 - */ -#define INT_850_IH2_FIQ 0 -#define INT_850_IH2_IRQ 1 -#define INT_850_USB_NON_ISO 2 -#define INT_850_USB_ISO 3 -#define INT_850_ICR 4 -#define INT_850_EAC 5 -#define INT_850_GPIO_BANK1 6 -#define INT_850_GPIO_BANK2 7 -#define INT_850_GPIO_BANK3 8 -#define INT_850_McBSP2TX 10 -#define INT_850_McBSP2RX 11 -#define INT_850_McBSP2RX_OVF 12 -#define INT_850_LCD_LINE 14 -#define INT_850_GSM_PROTECT 15 -#define INT_850_TIMER3 16 -#define INT_850_GPIO_BANK5 17 -#define INT_850_GPIO_BANK6 18 -#define INT_850_SPGIO_WR 29 - +#define INT_7XX_IH2_FIQ 0 +#define INT_7XX_IH2_IRQ 1 +#define INT_7XX_USB_NON_ISO 2 +#define INT_7XX_USB_ISO 3 +#define INT_7XX_ICR 4 +#define INT_7XX_EAC 5 +#define INT_7XX_GPIO_BANK1 6 +#define INT_7XX_GPIO_BANK2 7 +#define INT_7XX_GPIO_BANK3 8 +#define INT_7XX_McBSP2TX 10 +#define INT_7XX_McBSP2RX 11 +#define INT_7XX_McBSP2RX_OVF 12 +#define INT_7XX_LCD_LINE 14 +#define INT_7XX_GSM_PROTECT 15 +#define INT_7XX_TIMER3 16 +#define INT_7XX_GPIO_BANK5 17 +#define INT_7XX_GPIO_BANK6 18 +#define INT_7XX_SPGIO_WR 29 /* * IRQ numbers for interrupt handler 2 @@ -206,120 +183,62 @@ #define INT_1610_SHA1MD5 (91 + IH2_BASE) /* - * OMAP-730 specific IRQ numbers for interrupt handler 2 - */ -#define INT_730_HW_ERRORS (0 + IH2_BASE) -#define INT_730_NFIQ_PWR_FAIL (1 + IH2_BASE) -#define INT_730_CFCD (2 + IH2_BASE) -#define INT_730_CFIREQ (3 + IH2_BASE) -#define INT_730_I2C (4 + IH2_BASE) -#define INT_730_PCC (5 + IH2_BASE) -#define INT_730_MPU_EXT_NIRQ (6 + IH2_BASE) -#define INT_730_SPI_100K_1 (7 + IH2_BASE) -#define INT_730_SYREN_SPI (8 + IH2_BASE) -#define INT_730_VLYNQ (9 + IH2_BASE) -#define INT_730_GPIO_BANK4 (10 + IH2_BASE) -#define INT_730_McBSP1TX (11 + IH2_BASE) -#define INT_730_McBSP1RX (12 + IH2_BASE) -#define INT_730_McBSP1RX_OF (13 + IH2_BASE) -#define INT_730_UART_MODEM_IRDA_2 (14 + IH2_BASE) -#define INT_730_UART_MODEM_1 (15 + IH2_BASE) -#define INT_730_MCSI (16 + IH2_BASE) -#define INT_730_uWireTX (17 + IH2_BASE) -#define INT_730_uWireRX (18 + IH2_BASE) -#define INT_730_SMC_CD (19 + IH2_BASE) -#define INT_730_SMC_IREQ (20 + IH2_BASE) -#define INT_730_HDQ_1WIRE (21 + IH2_BASE) -#define INT_730_TIMER32K (22 + IH2_BASE) -#define INT_730_MMC_SDIO (23 + IH2_BASE) -#define INT_730_UPLD (24 + IH2_BASE) -#define INT_730_USB_HHC_1 (27 + IH2_BASE) -#define INT_730_USB_HHC_2 (28 + IH2_BASE) -#define INT_730_USB_GENI (29 + IH2_BASE) -#define INT_730_USB_OTG (30 + IH2_BASE) -#define INT_730_CAMERA_IF (31 + IH2_BASE) -#define INT_730_RNG (32 + IH2_BASE) -#define INT_730_DUAL_MODE_TIMER (33 + IH2_BASE) -#define INT_730_DBB_RF_EN (34 + IH2_BASE) -#define INT_730_MPUIO_KEYPAD (35 + IH2_BASE) -#define INT_730_SHA1_MD5 (36 + IH2_BASE) -#define INT_730_SPI_100K_2 (37 + IH2_BASE) -#define INT_730_RNG_IDLE (38 + IH2_BASE) -#define INT_730_MPUIO (39 + IH2_BASE) -#define INT_730_LLPC_LCD_CTRL_CAN_BE_OFF (40 + IH2_BASE) -#define INT_730_LLPC_OE_FALLING (41 + IH2_BASE) -#define INT_730_LLPC_OE_RISING (42 + IH2_BASE) -#define INT_730_LLPC_VSYNC (43 + IH2_BASE) -#define INT_730_WAKE_UP_REQ (46 + IH2_BASE) -#define INT_730_DMA_CH6 (53 + IH2_BASE) -#define INT_730_DMA_CH7 (54 + IH2_BASE) -#define INT_730_DMA_CH8 (55 + IH2_BASE) -#define INT_730_DMA_CH9 (56 + IH2_BASE) -#define INT_730_DMA_CH10 (57 + IH2_BASE) -#define INT_730_DMA_CH11 (58 + IH2_BASE) -#define INT_730_DMA_CH12 (59 + IH2_BASE) -#define INT_730_DMA_CH13 (60 + IH2_BASE) -#define INT_730_DMA_CH14 (61 + IH2_BASE) -#define INT_730_DMA_CH15 (62 + IH2_BASE) -#define INT_730_NAND (63 + IH2_BASE) - -/* - * OMAP-850 specific IRQ numbers for interrupt handler 2 + * OMAP-7xx specific IRQ numbers for interrupt handler 2 */ -#define INT_850_HW_ERRORS (0 + IH2_BASE) -#define INT_850_NFIQ_PWR_FAIL (1 + IH2_BASE) -#define INT_850_CFCD (2 + IH2_BASE) -#define INT_850_CFIREQ (3 + IH2_BASE) -#define INT_850_I2C (4 + IH2_BASE) -#define INT_850_PCC (5 + IH2_BASE) -#define INT_850_MPU_EXT_NIRQ (6 + IH2_BASE) -#define INT_850_SPI_100K_1 (7 + IH2_BASE) -#define INT_850_SYREN_SPI (8 + IH2_BASE) -#define INT_850_VLYNQ (9 + IH2_BASE) -#define INT_850_GPIO_BANK4 (10 + IH2_BASE) -#define INT_850_McBSP1TX (11 + IH2_BASE) -#define INT_850_McBSP1RX (12 + IH2_BASE) -#define INT_850_McBSP1RX_OF (13 + IH2_BASE) -#define INT_850_UART_MODEM_IRDA_2 (14 + IH2_BASE) -#define INT_850_UART_MODEM_1 (15 + IH2_BASE) -#define INT_850_MCSI (16 + IH2_BASE) -#define INT_850_uWireTX (17 + IH2_BASE) -#define INT_850_uWireRX (18 + IH2_BASE) -#define INT_850_SMC_CD (19 + IH2_BASE) -#define INT_850_SMC_IREQ (20 + IH2_BASE) -#define INT_850_HDQ_1WIRE (21 + IH2_BASE) -#define INT_850_TIMER32K (22 + IH2_BASE) -#define INT_850_MMC_SDIO (23 + IH2_BASE) -#define INT_850_UPLD (24 + IH2_BASE) -#define INT_850_USB_HHC_1 (27 + IH2_BASE) -#define INT_850_USB_HHC_2 (28 + IH2_BASE) -#define INT_850_USB_GENI (29 + IH2_BASE) -#define INT_850_USB_OTG (30 + IH2_BASE) -#define INT_850_CAMERA_IF (31 + IH2_BASE) -#define INT_850_RNG (32 + IH2_BASE) -#define INT_850_DUAL_MODE_TIMER (33 + IH2_BASE) -#define INT_850_DBB_RF_EN (34 + IH2_BASE) -#define INT_850_MPUIO_KEYPAD (35 + IH2_BASE) -#define INT_850_SHA1_MD5 (36 + IH2_BASE) -#define INT_850_SPI_100K_2 (37 + IH2_BASE) -#define INT_850_RNG_IDLE (38 + IH2_BASE) -#define INT_850_MPUIO (39 + IH2_BASE) -#define INT_850_LLPC_LCD_CTRL_CAN_BE_OFF (40 + IH2_BASE) -#define INT_850_LLPC_OE_FALLING (41 + IH2_BASE) -#define INT_850_LLPC_OE_RISING (42 + IH2_BASE) -#define INT_850_LLPC_VSYNC (43 + IH2_BASE) -#define INT_850_WAKE_UP_REQ (46 + IH2_BASE) -#define INT_850_DMA_CH6 (53 + IH2_BASE) -#define INT_850_DMA_CH7 (54 + IH2_BASE) -#define INT_850_DMA_CH8 (55 + IH2_BASE) -#define INT_850_DMA_CH9 (56 + IH2_BASE) -#define INT_850_DMA_CH10 (57 + IH2_BASE) -#define INT_850_DMA_CH11 (58 + IH2_BASE) -#define INT_850_DMA_CH12 (59 + IH2_BASE) -#define INT_850_DMA_CH13 (60 + IH2_BASE) -#define INT_850_DMA_CH14 (61 + IH2_BASE) -#define INT_850_DMA_CH15 (62 + IH2_BASE) -#define INT_850_NAND (63 + IH2_BASE) +#define INT_7XX_HW_ERRORS (0 + IH2_BASE) +#define INT_7XX_NFIQ_PWR_FAIL (1 + IH2_BASE) +#define INT_7XX_CFCD (2 + IH2_BASE) +#define INT_7XX_CFIREQ (3 + IH2_BASE) +#define INT_7XX_I2C (4 + IH2_BASE) +#define INT_7XX_PCC (5 + IH2_BASE) +#define INT_7XX_MPU_EXT_NIRQ (6 + IH2_BASE) +#define INT_7XX_SPI_100K_1 (7 + IH2_BASE) +#define INT_7XX_SYREN_SPI (8 + IH2_BASE) +#define INT_7XX_VLYNQ (9 + IH2_BASE) +#define INT_7XX_GPIO_BANK4 (10 + IH2_BASE) +#define INT_7XX_McBSP1TX (11 + IH2_BASE) +#define INT_7XX_McBSP1RX (12 + IH2_BASE) +#define INT_7XX_McBSP1RX_OF (13 + IH2_BASE) +#define INT_7XX_UART_MODEM_IRDA_2 (14 + IH2_BASE) +#define INT_7XX_UART_MODEM_1 (15 + IH2_BASE) +#define INT_7XX_MCSI (16 + IH2_BASE) +#define INT_7XX_uWireTX (17 + IH2_BASE) +#define INT_7XX_uWireRX (18 + IH2_BASE) +#define INT_7XX_SMC_CD (19 + IH2_BASE) +#define INT_7XX_SMC_IREQ (20 + IH2_BASE) +#define INT_7XX_HDQ_1WIRE (21 + IH2_BASE) +#define INT_7XX_TIMER32K (22 + IH2_BASE) +#define INT_7XX_MMC_SDIO (23 + IH2_BASE) +#define INT_7XX_UPLD (24 + IH2_BASE) +#define INT_7XX_USB_HHC_1 (27 + IH2_BASE) +#define INT_7XX_USB_HHC_2 (28 + IH2_BASE) +#define INT_7XX_USB_GENI (29 + IH2_BASE) +#define INT_7XX_USB_OTG (30 + IH2_BASE) +#define INT_7XX_CAMERA_IF (31 + IH2_BASE) +#define INT_7XX_RNG (32 + IH2_BASE) +#define INT_7XX_DUAL_MODE_TIMER (33 + IH2_BASE) +#define INT_7XX_DBB_RF_EN (34 + IH2_BASE) +#define INT_7XX_MPUIO_KEYPAD (35 + IH2_BASE) +#define INT_7XX_SHA1_MD5 (36 + IH2_BASE) +#define INT_7XX_SPI_100K_2 (37 + IH2_BASE) +#define INT_7XX_RNG_IDLE (38 + IH2_BASE) +#define INT_7XX_MPUIO (39 + IH2_BASE) +#define INT_7XX_LLPC_LCD_CTRL_CAN_BE_OFF (40 + IH2_BASE) +#define INT_7XX_LLPC_OE_FALLING (41 + IH2_BASE) +#define INT_7XX_LLPC_OE_RISING (42 + IH2_BASE) +#define INT_7XX_LLPC_VSYNC (43 + IH2_BASE) +#define INT_7XX_WAKE_UP_REQ (46 + IH2_BASE) +#define INT_7XX_DMA_CH6 (53 + IH2_BASE) +#define INT_7XX_DMA_CH7 (54 + IH2_BASE) +#define INT_7XX_DMA_CH8 (55 + IH2_BASE) +#define INT_7XX_DMA_CH9 (56 + IH2_BASE) +#define INT_7XX_DMA_CH10 (57 + IH2_BASE) +#define INT_7XX_DMA_CH11 (58 + IH2_BASE) +#define INT_7XX_DMA_CH12 (59 + IH2_BASE) +#define INT_7XX_DMA_CH13 (60 + IH2_BASE) +#define INT_7XX_DMA_CH14 (61 + IH2_BASE) +#define INT_7XX_DMA_CH15 (62 + IH2_BASE) +#define INT_7XX_NAND (63 + IH2_BASE) #define INT_24XX_SYS_NIRQ 7 #define INT_24XX_SDMA_IRQ0 12 diff --git a/arch/arm/plat-omap/include/mach/keypad.h b/arch/arm/plat-omap/include/plat/keypad.h index 3ae52ccc793c..3ae52ccc793c 100644 --- a/arch/arm/plat-omap/include/mach/keypad.h +++ b/arch/arm/plat-omap/include/plat/keypad.h diff --git a/arch/arm/plat-omap/include/mach/lcd_mipid.h b/arch/arm/plat-omap/include/plat/lcd_mipid.h index 8e52c6572281..8e52c6572281 100644 --- a/arch/arm/plat-omap/include/mach/lcd_mipid.h +++ b/arch/arm/plat-omap/include/plat/lcd_mipid.h diff --git a/arch/arm/plat-omap/include/mach/led.h b/arch/arm/plat-omap/include/plat/led.h index 25e451e7e2fd..25e451e7e2fd 100644 --- a/arch/arm/plat-omap/include/mach/led.h +++ b/arch/arm/plat-omap/include/plat/led.h diff --git a/arch/arm/plat-omap/include/mach/mailbox.h b/arch/arm/plat-omap/include/plat/mailbox.h index b7a6991814ec..b7a6991814ec 100644 --- a/arch/arm/plat-omap/include/mach/mailbox.h +++ b/arch/arm/plat-omap/include/plat/mailbox.h diff --git a/arch/arm/plat-omap/include/mach/mcbsp.h b/arch/arm/plat-omap/include/plat/mcbsp.h index e0d6eca222cc..4f22e5bb7ff7 100644 --- a/arch/arm/plat-omap/include/mach/mcbsp.h +++ b/arch/arm/plat-omap/include/plat/mcbsp.h @@ -28,10 +28,10 @@ #include <linux/spinlock.h> #include <mach/hardware.h> -#include <mach/clock.h> +#include <plat/clock.h> -#define OMAP730_MCBSP1_BASE 0xfffb1000 -#define OMAP730_MCBSP2_BASE 0xfffb1800 +#define OMAP7XX_MCBSP1_BASE 0xfffb1000 +#define OMAP7XX_MCBSP2_BASE 0xfffb1800 #define OMAP1510_MCBSP1_BASE 0xe1011800 #define OMAP1510_MCBSP2_BASE 0xfffb1000 @@ -58,7 +58,7 @@ #define OMAP44XX_MCBSP3_BASE 0x49026000 #define OMAP44XX_MCBSP4_BASE 0x48074000 -#if defined(CONFIG_ARCH_OMAP15XX) || defined(CONFIG_ARCH_OMAP16XX) || defined(CONFIG_ARCH_OMAP730) +#if defined(CONFIG_ARCH_OMAP15XX) || defined(CONFIG_ARCH_OMAP16XX) || defined(CONFIG_ARCH_OMAP730) || defined(CONFIG_ARCH_OMAP850) #define OMAP_MCBSP_REG_DRR2 0x00 #define OMAP_MCBSP_REG_DRR1 0x02 diff --git a/arch/arm/plat-omap/include/mach/mcspi.h b/arch/arm/plat-omap/include/plat/mcspi.h index 1254e4945b6f..1254e4945b6f 100644 --- a/arch/arm/plat-omap/include/mach/mcspi.h +++ b/arch/arm/plat-omap/include/plat/mcspi.h diff --git a/arch/arm/plat-omap/include/mach/memory.h b/arch/arm/plat-omap/include/plat/memory.h index 9ad41dc484c1..9ad41dc484c1 100644 --- a/arch/arm/plat-omap/include/mach/memory.h +++ b/arch/arm/plat-omap/include/plat/memory.h diff --git a/arch/arm/plat-omap/include/mach/menelaus.h b/arch/arm/plat-omap/include/plat/menelaus.h index 3122bf68c7ce..3122bf68c7ce 100644 --- a/arch/arm/plat-omap/include/mach/menelaus.h +++ b/arch/arm/plat-omap/include/plat/menelaus.h diff --git a/arch/arm/plat-omap/include/mach/mmc.h b/arch/arm/plat-omap/include/plat/mmc.h index 7229b9593301..29937137bf3e 100644 --- a/arch/arm/plat-omap/include/mach/mmc.h +++ b/arch/arm/plat-omap/include/plat/mmc.h @@ -15,7 +15,7 @@ #include <linux/device.h> #include <linux/mmc/host.h> -#include <mach/board.h> +#include <plat/board.h> #define OMAP15XX_NR_MMC 1 #define OMAP16XX_NR_MMC 2 diff --git a/arch/arm/plat-omap/include/mach/mux.h b/arch/arm/plat-omap/include/plat/mux.h index 0f49d2d563d9..f3c1d8a90456 100644 --- a/arch/arm/plat-omap/include/mach/mux.h +++ b/arch/arm/plat-omap/include/plat/mux.h @@ -51,23 +51,13 @@ .pu_pd_reg = PU_PD_SEL_##reg, \ .pu_pd_val = status, -#define MUX_REG_730(reg, mode_offset, mode) .mux_reg_name = "OMAP730_IO_CONF_"#reg, \ - .mux_reg = OMAP730_IO_CONF_##reg, \ +#define MUX_REG_7XX(reg, mode_offset, mode) .mux_reg_name = "OMAP7XX_IO_CONF_"#reg, \ + .mux_reg = OMAP7XX_IO_CONF_##reg, \ .mask_offset = mode_offset, \ .mask = mode, -#define PULL_REG_730(reg, bit, status) .pull_name = "OMAP730_IO_CONF_"#reg, \ - .pull_reg = OMAP730_IO_CONF_##reg, \ - .pull_bit = bit, \ - .pull_val = status, - -#define MUX_REG_850(reg, mode_offset, mode) .mux_reg_name = "OMAP850_IO_CONF_"#reg, \ - .mux_reg = OMAP850_IO_CONF_##reg, \ - .mask_offset = mode_offset, \ - .mask = mode, - -#define PULL_REG_850(reg, bit, status) .pull_name = "OMAP850_IO_CONF_"#reg, \ - .pull_reg = OMAP850_IO_CONF_##reg, \ +#define PULL_REG_7XX(reg, bit, status) .pull_name = "OMAP7XX_IO_CONF_"#reg, \ + .pull_reg = OMAP7XX_IO_CONF_##reg, \ .pull_bit = bit, \ .pull_val = status, @@ -84,21 +74,12 @@ #define PU_PD_REG(reg, status) .pu_pd_reg = PU_PD_SEL_##reg, \ .pu_pd_val = status, -#define MUX_REG_730(reg, mode_offset, mode) \ - .mux_reg = OMAP730_IO_CONF_##reg, \ +#define MUX_REG_7XX(reg, mode_offset, mode) \ + .mux_reg = OMAP7XX_IO_CONF_##reg, \ .mask_offset = mode_offset, \ .mask = mode, -#define PULL_REG_730(reg, bit, status) .pull_reg = OMAP730_IO_CONF_##reg, \ - .pull_bit = bit, \ - .pull_val = status, - -#define MUX_REG_850(reg, mode_offset, mode) \ - .mux_reg = OMAP850_IO_CONF_##reg, \ - .mask_offset = mode_offset, \ - .mask = mode, - -#define PULL_REG_850(reg, bit, status) .pull_reg = OMAP850_IO_CONF_##reg, \ +#define PULL_REG_7XX(reg, bit, status) .pull_reg = OMAP7XX_IO_CONF_##reg, \ .pull_bit = bit, \ .pull_val = status, @@ -118,32 +99,21 @@ /* * OMAP730/850 has a slightly different config for the pin mux. - * - config regs are the OMAP730_IO_CONF_x regs (see omap730.h) regs and + * - config regs are the OMAP7XX_IO_CONF_x regs (see omap730.h) regs and * not the FUNC_MUX_CTRL_x regs from hardware.h * - for pull-up/down, only has one enable bit which is is in the same register * as mux config */ -#define MUX_CFG_730(desc, mux_reg, mode_offset, mode, \ +#define MUX_CFG_7XX(desc, mux_reg, mode_offset, mode, \ pull_bit, pull_status, debug_status)\ { \ .name = desc, \ .debug = debug_status, \ - MUX_REG_730(mux_reg, mode_offset, mode) \ - PULL_REG_730(mux_reg, pull_bit, pull_status) \ + MUX_REG_7XX(mux_reg, mode_offset, mode) \ + PULL_REG_7XX(mux_reg, pull_bit, pull_status) \ PU_PD_REG(NA, 0) \ }, -#define MUX_CFG_850(desc, mux_reg, mode_offset, mode, \ - pull_bit, pull_status, debug_status)\ -{ \ - .name = desc, \ - .debug = debug_status, \ - MUX_REG_850(mux_reg, mode_offset, mode) \ - PULL_REG_850(mux_reg, pull_bit, pull_status) \ - PU_PD_REG(NA, 0) \ -}, - - #define MUX_CFG_24XX(desc, reg_offset, mode, \ pull_en, pull_mode, dbg) \ { \ @@ -232,45 +202,25 @@ struct pin_config { }; -enum omap730_index { +enum omap7xx_index { /* OMAP 730 keyboard */ - E2_730_KBR0, - J7_730_KBR1, - E1_730_KBR2, - F3_730_KBR3, - D2_730_KBR4, - C2_730_KBC0, - D3_730_KBC1, - E4_730_KBC2, - F4_730_KBC3, - E3_730_KBC4, - - /* USB */ - AA17_730_USB_DM, - W16_730_USB_PU_EN, - W17_730_USB_VBUSI, -}; - -enum omap850_index { - /* OMAP 850 keyboard */ - E2_850_KBR0, - J7_850_KBR1, - E1_850_KBR2, - F3_850_KBR3, - D2_850_KBR4, - C2_850_KBC0, - D3_850_KBC1, - E4_850_KBC2, - F4_850_KBC3, - E3_850_KBC4, + E2_7XX_KBR0, + J7_7XX_KBR1, + E1_7XX_KBR2, + F3_7XX_KBR3, + D2_7XX_KBR4, + C2_7XX_KBC0, + D3_7XX_KBC1, + E4_7XX_KBC2, + F4_7XX_KBC3, + E3_7XX_KBC4, /* USB */ - AA17_850_USB_DM, - W16_850_USB_PU_EN, - W17_850_USB_VBUSI, + AA17_7XX_USB_DM, + W16_7XX_USB_PU_EN, + W17_7XX_USB_VBUSI, }; - enum omap1xxx_index { /* UART1 (BT_UART_GATING)*/ UART1_TX = 0, diff --git a/arch/arm/plat-omap/include/mach/nand.h b/arch/arm/plat-omap/include/plat/nand.h index 631a7bed1eef..631a7bed1eef 100644 --- a/arch/arm/plat-omap/include/mach/nand.h +++ b/arch/arm/plat-omap/include/plat/nand.h diff --git a/arch/arm/plat-omap/include/mach/omap-alsa.h b/arch/arm/plat-omap/include/plat/omap-alsa.h index bdf30a0f87f2..b53055b390d0 100644 --- a/arch/arm/plat-omap/include/mach/omap-alsa.h +++ b/arch/arm/plat-omap/include/plat/omap-alsa.h @@ -40,10 +40,10 @@ #ifndef __OMAP_ALSA_H #define __OMAP_ALSA_H -#include <mach/dma.h> +#include <plat/dma.h> #include <sound/core.h> #include <sound/pcm.h> -#include <mach/mcbsp.h> +#include <plat/mcbsp.h> #include <linux/platform_device.h> #define DMA_BUF_SIZE (1024 * 8) diff --git a/arch/arm/plat-omap/include/mach/omap-pm.h b/arch/arm/plat-omap/include/plat/omap-pm.h index 3ee41d711492..3ee41d711492 100644 --- a/arch/arm/plat-omap/include/mach/omap-pm.h +++ b/arch/arm/plat-omap/include/plat/omap-pm.h diff --git a/arch/arm/plat-omap/include/mach/omap1510.h b/arch/arm/plat-omap/include/plat/omap1510.h index d24004668138..d24004668138 100644 --- a/arch/arm/plat-omap/include/mach/omap1510.h +++ b/arch/arm/plat-omap/include/plat/omap1510.h diff --git a/arch/arm/plat-omap/include/mach/omap16xx.h b/arch/arm/plat-omap/include/plat/omap16xx.h index 0e69b504c25f..0e69b504c25f 100644 --- a/arch/arm/plat-omap/include/mach/omap16xx.h +++ b/arch/arm/plat-omap/include/plat/omap16xx.h diff --git a/arch/arm/plat-omap/include/mach/omap24xx.h b/arch/arm/plat-omap/include/plat/omap24xx.h index 696edfc145a6..696edfc145a6 100644 --- a/arch/arm/plat-omap/include/mach/omap24xx.h +++ b/arch/arm/plat-omap/include/plat/omap24xx.h diff --git a/arch/arm/plat-omap/include/mach/omap34xx.h b/arch/arm/plat-omap/include/plat/omap34xx.h index f8d186a73712..f8d186a73712 100644 --- a/arch/arm/plat-omap/include/mach/omap34xx.h +++ b/arch/arm/plat-omap/include/plat/omap34xx.h diff --git a/arch/arm/plat-omap/include/mach/omap44xx.h b/arch/arm/plat-omap/include/plat/omap44xx.h index b3ba5ac7b4a4..336189753671 100644 --- a/arch/arm/plat-omap/include/mach/omap44xx.h +++ b/arch/arm/plat-omap/include/plat/omap44xx.h @@ -22,6 +22,9 @@ #define L4_PER_44XX_BASE 0x48000000 #define L4_EMU_44XX_BASE 0x54000000 #define L3_44XX_BASE 0x44000000 +#define OMAP44XX_EMIF1_BASE 0x4c000000 +#define OMAP44XX_EMIF2_BASE 0x4d000000 +#define OMAP44XX_DMM_BASE 0x4e000000 #define OMAP4430_32KSYNCT_BASE 0x4a304000 #define OMAP4430_CM_BASE 0x4a004000 #define OMAP4430_PRM_BASE 0x48306000 @@ -33,14 +36,9 @@ #define IRQ_SIR_IRQ 0x0040 #define OMAP44XX_GIC_DIST_BASE 0x48241000 #define OMAP44XX_GIC_CPU_BASE 0x48240100 -#define OMAP44XX_VA_GIC_CPU_BASE OMAP2_IO_ADDRESS(OMAP44XX_GIC_CPU_BASE) #define OMAP44XX_SCU_BASE 0x48240000 -#define OMAP44XX_VA_SCU_BASE OMAP2_IO_ADDRESS(OMAP44XX_SCU_BASE) #define OMAP44XX_LOCAL_TWD_BASE 0x48240600 -#define OMAP44XX_VA_LOCAL_TWD_BASE OMAP2_IO_ADDRESS(OMAP44XX_LOCAL_TWD_BASE) -#define OMAP44XX_LOCAL_TWD_SIZE 0x00000100 #define OMAP44XX_WKUPGEN_BASE 0x48281000 -#define OMAP44XX_VA_WKUPGEN_BASE OMAP2_IO_ADDRESS(OMAP44XX_WKUPGEN_BASE) #endif /* __ASM_ARCH_OMAP44XX_H */ diff --git a/arch/arm/plat-omap/include/mach/omap730.h b/arch/arm/plat-omap/include/plat/omap730.h index 14272bc1a6fd..14272bc1a6fd 100644 --- a/arch/arm/plat-omap/include/mach/omap730.h +++ b/arch/arm/plat-omap/include/plat/omap730.h diff --git a/arch/arm/plat-omap/include/plat/omap7xx.h b/arch/arm/plat-omap/include/plat/omap7xx.h new file mode 100644 index 000000000000..53f52414b0e9 --- /dev/null +++ b/arch/arm/plat-omap/include/plat/omap7xx.h @@ -0,0 +1,104 @@ +/* arch/arm/plat-omap/include/mach/omap7xx.h + * + * Hardware definitions for TI OMAP7XX processor. + * + * Cleanup for Linux-2.6 by Dirk Behme <dirk.behme@de.bosch.com> + * Adapted for omap850 by Zebediah C. McClure <zmc@lurian.net> + * Adapted for omap7xx by Alistair Buxton <a.j.buxton@gmail.com> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED + * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN + * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, + * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT + * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF + * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON + * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF + * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#ifndef __ASM_ARCH_OMAP7XX_H +#define __ASM_ARCH_OMAP7XX_H + +/* + * ---------------------------------------------------------------------------- + * Base addresses + * ---------------------------------------------------------------------------- + */ + +/* Syntax: XX_BASE = Virtual base address, XX_START = Physical base address */ + +#define OMAP7XX_DSP_BASE 0xE0000000 +#define OMAP7XX_DSP_SIZE 0x50000 +#define OMAP7XX_DSP_START 0xE0000000 + +#define OMAP7XX_DSPREG_BASE 0xE1000000 +#define OMAP7XX_DSPREG_SIZE SZ_128K +#define OMAP7XX_DSPREG_START 0xE1000000 + +/* + * ---------------------------------------------------------------------------- + * OMAP7XX specific configuration registers + * ---------------------------------------------------------------------------- + */ +#define OMAP7XX_CONFIG_BASE 0xfffe1000 +#define OMAP7XX_IO_CONF_0 0xfffe1070 +#define OMAP7XX_IO_CONF_1 0xfffe1074 +#define OMAP7XX_IO_CONF_2 0xfffe1078 +#define OMAP7XX_IO_CONF_3 0xfffe107c +#define OMAP7XX_IO_CONF_4 0xfffe1080 +#define OMAP7XX_IO_CONF_5 0xfffe1084 +#define OMAP7XX_IO_CONF_6 0xfffe1088 +#define OMAP7XX_IO_CONF_7 0xfffe108c +#define OMAP7XX_IO_CONF_8 0xfffe1090 +#define OMAP7XX_IO_CONF_9 0xfffe1094 +#define OMAP7XX_IO_CONF_10 0xfffe1098 +#define OMAP7XX_IO_CONF_11 0xfffe109c +#define OMAP7XX_IO_CONF_12 0xfffe10a0 +#define OMAP7XX_IO_CONF_13 0xfffe10a4 + +#define OMAP7XX_MODE_1 0xfffe1010 +#define OMAP7XX_MODE_2 0xfffe1014 + +/* CSMI specials: in terms of base + offset */ +#define OMAP7XX_MODE2_OFFSET 0x14 + +/* + * ---------------------------------------------------------------------------- + * OMAP7XX traffic controller configuration registers + * ---------------------------------------------------------------------------- + */ +#define OMAP7XX_FLASH_CFG_0 0xfffecc10 +#define OMAP7XX_FLASH_ACFG_0 0xfffecc50 +#define OMAP7XX_FLASH_CFG_1 0xfffecc14 +#define OMAP7XX_FLASH_ACFG_1 0xfffecc54 + +/* + * ---------------------------------------------------------------------------- + * OMAP7XX DSP control registers + * ---------------------------------------------------------------------------- + */ +#define OMAP7XX_ICR_BASE 0xfffbb800 +#define OMAP7XX_DSP_M_CTL 0xfffbb804 +#define OMAP7XX_DSP_MMU_BASE 0xfffed200 + +/* + * ---------------------------------------------------------------------------- + * OMAP7XX PCC_UPLD configuration registers + * ---------------------------------------------------------------------------- + */ +#define OMAP7XX_PCC_UPLD_CTRL_BASE (0xfffe0900) +#define OMAP7XX_PCC_UPLD_CTRL (OMAP7XX_PCC_UPLD_CTRL_BASE + 0x00) + +#endif /* __ASM_ARCH_OMAP7XX_H */ + diff --git a/arch/arm/plat-omap/include/mach/omap850.h b/arch/arm/plat-omap/include/plat/omap850.h index c33f67981712..c33f67981712 100644 --- a/arch/arm/plat-omap/include/mach/omap850.h +++ b/arch/arm/plat-omap/include/plat/omap850.h diff --git a/arch/arm/plat-omap/include/mach/omap_device.h b/arch/arm/plat-omap/include/plat/omap_device.h index bd0e136db337..11a9773a4e7f 100644 --- a/arch/arm/plat-omap/include/mach/omap_device.h +++ b/arch/arm/plat-omap/include/plat/omap_device.h @@ -34,7 +34,7 @@ #include <linux/kernel.h> #include <linux/platform_device.h> -#include <mach/omap_hwmod.h> +#include <plat/omap_hwmod.h> /* omap_device._state values */ #define OMAP_DEVICE_STATE_UNKNOWN 0 diff --git a/arch/arm/plat-omap/include/mach/omap_hwmod.h b/arch/arm/plat-omap/include/plat/omap_hwmod.h index 1f79c20e2929..dbdd123eca16 100644 --- a/arch/arm/plat-omap/include/mach/omap_hwmod.h +++ b/arch/arm/plat-omap/include/plat/omap_hwmod.h @@ -35,7 +35,7 @@ #include <linux/kernel.h> #include <linux/ioport.h> -#include <mach/cpu.h> +#include <plat/cpu.h> struct omap_device; diff --git a/arch/arm/plat-omap/include/mach/omapfb.h b/arch/arm/plat-omap/include/plat/omapfb.h index b226bdf45739..bfef7ab95f17 100644 --- a/arch/arm/plat-omap/include/mach/omapfb.h +++ b/arch/arm/plat-omap/include/plat/omapfb.h @@ -168,7 +168,7 @@ enum omapfb_update_mode { #include <linux/fb.h> #include <linux/mutex.h> -#include <mach/board.h> +#include <plat/board.h> #define OMAP_LCDC_INV_VSYNC 0x0001 #define OMAP_LCDC_INV_HSYNC 0x0002 diff --git a/arch/arm/plat-omap/include/mach/onenand.h b/arch/arm/plat-omap/include/plat/onenand.h index 72f433d7d827..72f433d7d827 100644 --- a/arch/arm/plat-omap/include/mach/onenand.h +++ b/arch/arm/plat-omap/include/plat/onenand.h diff --git a/arch/arm/plat-omap/include/mach/param.h b/arch/arm/plat-omap/include/plat/param.h index 1eb4dc326979..1eb4dc326979 100644 --- a/arch/arm/plat-omap/include/mach/param.h +++ b/arch/arm/plat-omap/include/plat/param.h diff --git a/arch/arm/plat-omap/include/mach/powerdomain.h b/arch/arm/plat-omap/include/plat/powerdomain.h index fa6461423bd0..3d45ee1d3cf4 100644 --- a/arch/arm/plat-omap/include/mach/powerdomain.h +++ b/arch/arm/plat-omap/include/plat/powerdomain.h @@ -19,7 +19,7 @@ #include <asm/atomic.h> -#include <mach/cpu.h> +#include <plat/cpu.h> /* Powerdomain basic power states */ diff --git a/arch/arm/plat-omap/include/mach/prcm.h b/arch/arm/plat-omap/include/plat/prcm.h index cda2a70397b4..cda2a70397b4 100644 --- a/arch/arm/plat-omap/include/mach/prcm.h +++ b/arch/arm/plat-omap/include/plat/prcm.h diff --git a/arch/arm/plat-omap/include/mach/sdrc.h b/arch/arm/plat-omap/include/plat/sdrc.h index 1c09c78a48f2..7b58a5f78ce4 100644 --- a/arch/arm/plat-omap/include/mach/sdrc.h +++ b/arch/arm/plat-omap/include/plat/sdrc.h @@ -80,11 +80,11 @@ */ #define OMAP242X_SMS_REGADDR(reg) \ - (void __iomem *)OMAP2_IO_ADDRESS(OMAP2420_SMS_BASE + reg) + (void __iomem *)OMAP2_L3_IO_ADDRESS(OMAP2420_SMS_BASE + reg) #define OMAP243X_SMS_REGADDR(reg) \ - (void __iomem *)OMAP2_IO_ADDRESS(OMAP243X_SMS_BASE + reg) + (void __iomem *)OMAP2_L3_IO_ADDRESS(OMAP243X_SMS_BASE + reg) #define OMAP343X_SMS_REGADDR(reg) \ - (void __iomem *)OMAP2_IO_ADDRESS(OMAP343X_SMS_BASE + reg) + (void __iomem *)OMAP2_L3_IO_ADDRESS(OMAP343X_SMS_BASE + reg) /* SMS register offsets - read/write with sms_{read,write}_reg() */ diff --git a/arch/arm/plat-omap/include/mach/serial.h b/arch/arm/plat-omap/include/plat/serial.h index e249186d26e2..e249186d26e2 100644 --- a/arch/arm/plat-omap/include/mach/serial.h +++ b/arch/arm/plat-omap/include/plat/serial.h diff --git a/arch/arm/plat-omap/include/mach/smp.h b/arch/arm/plat-omap/include/plat/smp.h index dcaa8fde7063..dcaa8fde7063 100644 --- a/arch/arm/plat-omap/include/mach/smp.h +++ b/arch/arm/plat-omap/include/plat/smp.h diff --git a/arch/arm/plat-omap/include/mach/sram.h b/arch/arm/plat-omap/include/plat/sram.h index 8974e3fc2691..8974e3fc2691 100644 --- a/arch/arm/plat-omap/include/mach/sram.h +++ b/arch/arm/plat-omap/include/plat/sram.h diff --git a/arch/arm/plat-omap/include/mach/system.h b/arch/arm/plat-omap/include/plat/system.h index ed8ec7477261..c58a4ef42a45 100644 --- a/arch/arm/plat-omap/include/mach/system.h +++ b/arch/arm/plat-omap/include/plat/system.h @@ -9,7 +9,7 @@ #include <asm/mach-types.h> #include <mach/hardware.h> -#include <mach/prcm.h> +#include <plat/prcm.h> #ifndef CONFIG_MACH_VOICEBLUE #define voiceblue_reset() do {} while (0) diff --git a/arch/arm/plat-omap/include/mach/tc.h b/arch/arm/plat-omap/include/plat/tc.h index d2fcd789bb9a..d2fcd789bb9a 100644 --- a/arch/arm/plat-omap/include/mach/tc.h +++ b/arch/arm/plat-omap/include/plat/tc.h diff --git a/arch/arm/plat-omap/include/mach/timer-gp.h b/arch/arm/plat-omap/include/plat/timer-gp.h index c88d346b59d9..c88d346b59d9 100644 --- a/arch/arm/plat-omap/include/mach/timer-gp.h +++ b/arch/arm/plat-omap/include/plat/timer-gp.h diff --git a/arch/arm/plat-omap/include/mach/timex.h b/arch/arm/plat-omap/include/plat/timex.h index 6d35767bc48f..6d35767bc48f 100644 --- a/arch/arm/plat-omap/include/mach/timex.h +++ b/arch/arm/plat-omap/include/plat/timex.h diff --git a/arch/arm/plat-omap/include/mach/uncompress.h b/arch/arm/plat-omap/include/plat/uncompress.h index 0814c5f210c3..e22f57564b59 100644 --- a/arch/arm/plat-omap/include/mach/uncompress.h +++ b/arch/arm/plat-omap/include/plat/uncompress.h @@ -19,12 +19,13 @@ #include <linux/types.h> #include <linux/serial_reg.h> -#include <mach/serial.h> +#include <plat/serial.h> unsigned int system_rev; #define UART_OMAP_MDR1 0x08 /* mode definition register */ #define OMAP_ID_730 0x355F +#define OMAP_ID_850 0x362C #define ID_MASK 0x7fff #define check_port(base, shift) ((base[UART_OMAP_MDR1 << shift] & 7) == 0) #define omap_get_id() ((*(volatile unsigned int *)(0xfffed404)) >> 12) & ID_MASK @@ -53,7 +54,7 @@ static void putc(int c) /* MMU is not on, so cpu_is_omapXXXX() won't work here */ unsigned int omap_id = omap_get_id(); - if (omap_id == OMAP_ID_730) + if (omap_id == OMAP_ID_730 || omap_id == OMAP_ID_850) shift = 0; if (check_port(uart, shift)) diff --git a/arch/arm/plat-omap/include/mach/usb.h b/arch/arm/plat-omap/include/plat/usb.h index f337e1761e2c..33e72ca125d7 100644 --- a/arch/arm/plat-omap/include/mach/usb.h +++ b/arch/arm/plat-omap/include/plat/usb.h @@ -3,7 +3,7 @@ #ifndef __ASM_ARCH_OMAP_USB_H #define __ASM_ARCH_OMAP_USB_H -#include <mach/board.h> +#include <plat/board.h> /*-------------------------------------------------------------------------*/ diff --git a/arch/arm/plat-omap/io.c b/arch/arm/plat-omap/io.c index b6defa23e77e..11f5d7961c73 100644 --- a/arch/arm/plat-omap/io.c +++ b/arch/arm/plat-omap/io.c @@ -13,12 +13,12 @@ #include <linux/io.h> #include <linux/mm.h> -#include <mach/omap730.h> -#include <mach/omap1510.h> -#include <mach/omap16xx.h> -#include <mach/omap24xx.h> -#include <mach/omap34xx.h> -#include <mach/omap44xx.h> +#include <plat/omap7xx.h> +#include <plat/omap1510.h> +#include <plat/omap16xx.h> +#include <plat/omap24xx.h> +#include <plat/omap34xx.h> +#include <plat/omap44xx.h> #define BETWEEN(p,st,sz) ((p) >= (st) && (p) < ((st) + (sz))) #define XLATE(p,pst,vst) ((void __iomem *)((p) - (pst) + (vst))) @@ -33,13 +33,13 @@ void __iomem *omap_ioremap(unsigned long p, size_t size, unsigned int type) if (BETWEEN(p, OMAP1_IO_PHYS, OMAP1_IO_SIZE)) return XLATE(p, OMAP1_IO_PHYS, OMAP1_IO_VIRT); } - if (cpu_is_omap730()) { - if (BETWEEN(p, OMAP730_DSP_BASE, OMAP730_DSP_SIZE)) - return XLATE(p, OMAP730_DSP_BASE, OMAP730_DSP_START); + if (cpu_is_omap7xx()) { + if (BETWEEN(p, OMAP7XX_DSP_BASE, OMAP7XX_DSP_SIZE)) + return XLATE(p, OMAP7XX_DSP_BASE, OMAP7XX_DSP_START); - if (BETWEEN(p, OMAP730_DSPREG_BASE, OMAP730_DSPREG_SIZE)) - return XLATE(p, OMAP730_DSPREG_BASE, - OMAP730_DSPREG_START); + if (BETWEEN(p, OMAP7XX_DSPREG_BASE, OMAP7XX_DSPREG_SIZE)) + return XLATE(p, OMAP7XX_DSPREG_BASE, + OMAP7XX_DSPREG_START); } if (cpu_is_omap15xx()) { if (BETWEEN(p, OMAP1510_DSP_BASE, OMAP1510_DSP_SIZE)) @@ -114,6 +114,14 @@ void __iomem *omap_ioremap(unsigned long p, size_t size, unsigned int type) return XLATE(p, L4_WK_44XX_PHYS, L4_WK_44XX_VIRT); if (BETWEEN(p, OMAP44XX_GPMC_PHYS, OMAP44XX_GPMC_SIZE)) return XLATE(p, OMAP44XX_GPMC_PHYS, OMAP44XX_GPMC_VIRT); + if (BETWEEN(p, OMAP44XX_EMIF1_PHYS, OMAP44XX_EMIF1_SIZE)) + return XLATE(p, OMAP44XX_EMIF1_PHYS, \ + OMAP44XX_EMIF1_VIRT); + if (BETWEEN(p, OMAP44XX_EMIF2_PHYS, OMAP44XX_EMIF2_SIZE)) + return XLATE(p, OMAP44XX_EMIF2_PHYS, \ + OMAP44XX_EMIF2_VIRT); + if (BETWEEN(p, OMAP44XX_DMM_PHYS, OMAP44XX_DMM_SIZE)) + return XLATE(p, OMAP44XX_DMM_PHYS, OMAP44XX_DMM_VIRT); if (BETWEEN(p, L4_PER_44XX_PHYS, L4_PER_44XX_SIZE)) return XLATE(p, L4_PER_44XX_PHYS, L4_PER_44XX_VIRT); if (BETWEEN(p, L4_EMU_44XX_PHYS, L4_EMU_44XX_SIZE)) @@ -142,7 +150,7 @@ u8 omap_readb(u32 pa) if (cpu_class_is_omap1()) return __raw_readb(OMAP1_IO_ADDRESS(pa)); else - return __raw_readb(OMAP2_IO_ADDRESS(pa)); + return __raw_readb(OMAP2_L4_IO_ADDRESS(pa)); } EXPORT_SYMBOL(omap_readb); @@ -151,7 +159,7 @@ u16 omap_readw(u32 pa) if (cpu_class_is_omap1()) return __raw_readw(OMAP1_IO_ADDRESS(pa)); else - return __raw_readw(OMAP2_IO_ADDRESS(pa)); + return __raw_readw(OMAP2_L4_IO_ADDRESS(pa)); } EXPORT_SYMBOL(omap_readw); @@ -160,7 +168,7 @@ u32 omap_readl(u32 pa) if (cpu_class_is_omap1()) return __raw_readl(OMAP1_IO_ADDRESS(pa)); else - return __raw_readl(OMAP2_IO_ADDRESS(pa)); + return __raw_readl(OMAP2_L4_IO_ADDRESS(pa)); } EXPORT_SYMBOL(omap_readl); @@ -169,7 +177,7 @@ void omap_writeb(u8 v, u32 pa) if (cpu_class_is_omap1()) __raw_writeb(v, OMAP1_IO_ADDRESS(pa)); else - __raw_writeb(v, OMAP2_IO_ADDRESS(pa)); + __raw_writeb(v, OMAP2_L4_IO_ADDRESS(pa)); } EXPORT_SYMBOL(omap_writeb); @@ -178,7 +186,7 @@ void omap_writew(u16 v, u32 pa) if (cpu_class_is_omap1()) __raw_writew(v, OMAP1_IO_ADDRESS(pa)); else - __raw_writew(v, OMAP2_IO_ADDRESS(pa)); + __raw_writew(v, OMAP2_L4_IO_ADDRESS(pa)); } EXPORT_SYMBOL(omap_writew); @@ -187,6 +195,6 @@ void omap_writel(u32 v, u32 pa) if (cpu_class_is_omap1()) __raw_writel(v, OMAP1_IO_ADDRESS(pa)); else - __raw_writel(v, OMAP2_IO_ADDRESS(pa)); + __raw_writel(v, OMAP2_L4_IO_ADDRESS(pa)); } EXPORT_SYMBOL(omap_writel); diff --git a/arch/arm/plat-omap/iommu-debug.c b/arch/arm/plat-omap/iommu-debug.c index c799b3b0d709..afd1c27cff7c 100644 --- a/arch/arm/plat-omap/iommu-debug.c +++ b/arch/arm/plat-omap/iommu-debug.c @@ -17,8 +17,8 @@ #include <linux/platform_device.h> #include <linux/debugfs.h> -#include <mach/iommu.h> -#include <mach/iovmm.h> +#include <plat/iommu.h> +#include <plat/iovmm.h> #include "iopgtable.h" diff --git a/arch/arm/plat-omap/iommu.c b/arch/arm/plat-omap/iommu.c index 94584f167a82..c0ff1e39d893 100644 --- a/arch/arm/plat-omap/iommu.c +++ b/arch/arm/plat-omap/iommu.c @@ -20,7 +20,7 @@ #include <asm/cacheflush.h> -#include <mach/iommu.h> +#include <plat/iommu.h> #include "iopgtable.h" diff --git a/arch/arm/plat-omap/iovmm.c b/arch/arm/plat-omap/iovmm.c index dc3fac3dd0ea..0ce36bbef9d2 100644 --- a/arch/arm/plat-omap/iovmm.c +++ b/arch/arm/plat-omap/iovmm.c @@ -18,8 +18,8 @@ #include <asm/cacheflush.h> #include <asm/mach/map.h> -#include <mach/iommu.h> -#include <mach/iovmm.h> +#include <plat/iommu.h> +#include <plat/iovmm.h> #include "iopgtable.h" diff --git a/arch/arm/plat-omap/mailbox.c b/arch/arm/plat-omap/mailbox.c index 40424edae939..734bff332c82 100644 --- a/arch/arm/plat-omap/mailbox.c +++ b/arch/arm/plat-omap/mailbox.c @@ -26,7 +26,7 @@ #include <linux/device.h> #include <linux/delay.h> -#include <mach/mailbox.h> +#include <plat/mailbox.h> static int enable_seq_bit; module_param(enable_seq_bit, bool, 0); diff --git a/arch/arm/plat-omap/mcbsp.c b/arch/arm/plat-omap/mcbsp.c index e664b912d7bb..92770334d728 100644 --- a/arch/arm/plat-omap/mcbsp.c +++ b/arch/arm/plat-omap/mcbsp.c @@ -24,8 +24,8 @@ #include <linux/delay.h> #include <linux/io.h> -#include <mach/dma.h> -#include <mach/mcbsp.h> +#include <plat/dma.h> +#include <plat/mcbsp.h> struct omap_mcbsp **mcbsp_ptr; int omap_mcbsp_count; diff --git a/arch/arm/plat-omap/mux.c b/arch/arm/plat-omap/mux.c index 8d329fb20740..05aebcad215b 100644 --- a/arch/arm/plat-omap/mux.c +++ b/arch/arm/plat-omap/mux.c @@ -28,7 +28,7 @@ #include <linux/io.h> #include <asm/system.h> #include <linux/spinlock.h> -#include <mach/mux.h> +#include <plat/mux.h> #ifdef CONFIG_OMAP_MUX diff --git a/arch/arm/plat-omap/omap-pm-noop.c b/arch/arm/plat-omap/omap-pm-noop.c index e98f0a2a6c26..186bca82cfab 100644 --- a/arch/arm/plat-omap/omap-pm-noop.c +++ b/arch/arm/plat-omap/omap-pm-noop.c @@ -22,9 +22,9 @@ #include <linux/device.h> /* Interface documentation is in mach/omap-pm.h */ -#include <mach/omap-pm.h> +#include <plat/omap-pm.h> -#include <mach/powerdomain.h> +#include <plat/powerdomain.h> struct omap_opp *dsp_opps; struct omap_opp *mpu_opps; diff --git a/arch/arm/plat-omap/omap_device.c b/arch/arm/plat-omap/omap_device.c index 2c409fc6dd21..bb16e624a557 100644 --- a/arch/arm/plat-omap/omap_device.c +++ b/arch/arm/plat-omap/omap_device.c @@ -82,8 +82,8 @@ #include <linux/err.h> #include <linux/io.h> -#include <mach/omap_device.h> -#include <mach/omap_hwmod.h> +#include <plat/omap_device.h> +#include <plat/omap_hwmod.h> /* These parameters are passed to _omap_device_{de,}activate() */ #define USE_WAKEUP_LAT 0 @@ -103,21 +103,6 @@ /* Private functions */ /** - * _read_32ksynct - read the OMAP 32K sync timer - * - * Returns the current value of the 32KiHz synchronization counter. - * XXX this should be generalized to simply read the system clocksource. - * XXX this should be moved to a separate synctimer32k.c file - */ -static u32 _read_32ksynct(void) -{ - if (!cpu_class_is_omap2()) - BUG(); - - return __raw_readl(OMAP2_IO_ADDRESS(OMAP_32KSYNCT_BASE + 0x010)); -} - -/** * _omap_device_activate - increase device readiness * @od: struct omap_device * * @ignore_lat: increase to latency target (0) or full readiness (1)? @@ -133,13 +118,13 @@ static u32 _read_32ksynct(void) */ static int _omap_device_activate(struct omap_device *od, u8 ignore_lat) { - u32 a, b; + struct timespec a, b, c; pr_debug("omap_device: %s: activating\n", od->pdev.name); while (od->pm_lat_level > 0) { struct omap_device_pm_latency *odpl; - int act_lat = 0; + unsigned long long act_lat = 0; od->pm_lat_level--; @@ -149,20 +134,22 @@ static int _omap_device_activate(struct omap_device *od, u8 ignore_lat) (od->dev_wakeup_lat <= od->_dev_wakeup_lat_limit)) break; - a = _read_32ksynct(); + getnstimeofday(&a); /* XXX check return code */ odpl->activate_func(od); - b = _read_32ksynct(); + getnstimeofday(&b); - act_lat = (b - a) >> 15; /* 32KiHz cycles to microseconds */ + c = timespec_sub(b, a); + act_lat = timespec_to_ns(&c) * NSEC_PER_USEC; pr_debug("omap_device: %s: pm_lat %d: activate: elapsed time " - "%d usec\n", od->pdev.name, od->pm_lat_level, act_lat); + "%llu usec\n", od->pdev.name, od->pm_lat_level, + act_lat); WARN(act_lat > odpl->activate_lat, "omap_device: %s.%d: " - "activate step %d took longer than expected (%d > %d)\n", + "activate step %d took longer than expected (%llu > %d)\n", od->pdev.name, od->pdev.id, od->pm_lat_level, act_lat, odpl->activate_lat); @@ -188,13 +175,13 @@ static int _omap_device_activate(struct omap_device *od, u8 ignore_lat) */ static int _omap_device_deactivate(struct omap_device *od, u8 ignore_lat) { - u32 a, b; + struct timespec a, b, c; pr_debug("omap_device: %s: deactivating\n", od->pdev.name); while (od->pm_lat_level < od->pm_lats_cnt) { struct omap_device_pm_latency *odpl; - int deact_lat = 0; + unsigned long long deact_lat = 0; odpl = od->pm_lats + od->pm_lat_level; @@ -203,23 +190,24 @@ static int _omap_device_deactivate(struct omap_device *od, u8 ignore_lat) od->_dev_wakeup_lat_limit)) break; - a = _read_32ksynct(); + getnstimeofday(&a); /* XXX check return code */ odpl->deactivate_func(od); - b = _read_32ksynct(); + getnstimeofday(&b); - deact_lat = (b - a) >> 15; /* 32KiHz cycles to microseconds */ + c = timespec_sub(b, a); + deact_lat = timespec_to_ns(&c) * NSEC_PER_USEC; pr_debug("omap_device: %s: pm_lat %d: deactivate: elapsed time " - "%d usec\n", od->pdev.name, od->pm_lat_level, + "%llu usec\n", od->pdev.name, od->pm_lat_level, deact_lat); WARN(deact_lat > odpl->deactivate_lat, "omap_device: %s.%d: " - "deactivate step %d took longer than expected (%d > %d)\n", - od->pdev.name, od->pdev.id, od->pm_lat_level, - deact_lat, odpl->deactivate_lat); + "deactivate step %d took longer than expected " + "(%llu > %d)\n", od->pdev.name, od->pdev.id, + od->pm_lat_level, deact_lat, odpl->deactivate_lat); od->dev_wakeup_lat += odpl->activate_lat; diff --git a/arch/arm/plat-omap/sram.c b/arch/arm/plat-omap/sram.c index 75d1f26e5b17..a53aa8541730 100644 --- a/arch/arm/plat-omap/sram.c +++ b/arch/arm/plat-omap/sram.c @@ -25,11 +25,11 @@ #include <asm/mach/map.h> -#include <mach/sram.h> -#include <mach/board.h> -#include <mach/cpu.h> +#include <plat/sram.h> +#include <plat/board.h> +#include <plat/cpu.h> -#include <mach/control.h> +#include <plat/control.h> #if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3) # include "../mach-omap2/prm.h" @@ -41,14 +41,14 @@ #define OMAP1_SRAM_VA VMALLOC_END #define OMAP2_SRAM_PA 0x40200000 #define OMAP2_SRAM_PUB_PA 0x4020f800 -#define OMAP2_SRAM_VA 0xe3000000 +#define OMAP2_SRAM_VA 0xfe400000 #define OMAP2_SRAM_PUB_VA (OMAP2_SRAM_VA + 0x800) #define OMAP3_SRAM_PA 0x40200000 -#define OMAP3_SRAM_VA 0xe3000000 +#define OMAP3_SRAM_VA 0xfe400000 #define OMAP3_SRAM_PUB_PA 0x40208000 #define OMAP3_SRAM_PUB_VA (OMAP3_SRAM_VA + 0x8000) #define OMAP4_SRAM_PA 0x40200000 /*0x402f0000*/ -#define OMAP4_SRAM_VA 0xd7000000 /*0xd70f0000*/ +#define OMAP4_SRAM_VA 0xfe400000 /*0xfe4f0000*/ #if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX) #define SRAM_BOOTLOADER_SZ 0x00 @@ -56,16 +56,16 @@ #define SRAM_BOOTLOADER_SZ 0x80 #endif -#define OMAP24XX_VA_REQINFOPERM0 OMAP2_IO_ADDRESS(0x68005048) -#define OMAP24XX_VA_READPERM0 OMAP2_IO_ADDRESS(0x68005050) -#define OMAP24XX_VA_WRITEPERM0 OMAP2_IO_ADDRESS(0x68005058) +#define OMAP24XX_VA_REQINFOPERM0 OMAP2_L3_IO_ADDRESS(0x68005048) +#define OMAP24XX_VA_READPERM0 OMAP2_L3_IO_ADDRESS(0x68005050) +#define OMAP24XX_VA_WRITEPERM0 OMAP2_L3_IO_ADDRESS(0x68005058) -#define OMAP34XX_VA_REQINFOPERM0 OMAP2_IO_ADDRESS(0x68012848) -#define OMAP34XX_VA_READPERM0 OMAP2_IO_ADDRESS(0x68012850) -#define OMAP34XX_VA_WRITEPERM0 OMAP2_IO_ADDRESS(0x68012858) -#define OMAP34XX_VA_ADDR_MATCH2 OMAP2_IO_ADDRESS(0x68012880) -#define OMAP34XX_VA_SMS_RG_ATT0 OMAP2_IO_ADDRESS(0x6C000048) -#define OMAP34XX_VA_CONTROL_STAT OMAP2_IO_ADDRESS(0x480022F0) +#define OMAP34XX_VA_REQINFOPERM0 OMAP2_L3_IO_ADDRESS(0x68012848) +#define OMAP34XX_VA_READPERM0 OMAP2_L3_IO_ADDRESS(0x68012850) +#define OMAP34XX_VA_WRITEPERM0 OMAP2_L3_IO_ADDRESS(0x68012858) +#define OMAP34XX_VA_ADDR_MATCH2 OMAP2_L3_IO_ADDRESS(0x68012880) +#define OMAP34XX_VA_SMS_RG_ATT0 OMAP2_L3_IO_ADDRESS(0x6C000048) +#define OMAP34XX_VA_CONTROL_STAT OMAP2_L4_IO_ADDRESS(0x480022F0) #define GP_DEVICE 0x300 diff --git a/arch/arm/plat-omap/usb.c b/arch/arm/plat-omap/usb.c index 509f2ed99e21..0ea1e0beb455 100644 --- a/arch/arm/plat-omap/usb.c +++ b/arch/arm/plat-omap/usb.c @@ -33,10 +33,10 @@ #include <asm/system.h> #include <mach/hardware.h> -#include <mach/control.h> -#include <mach/mux.h> -#include <mach/usb.h> -#include <mach/board.h> +#include <plat/control.h> +#include <plat/mux.h> +#include <plat/usb.h> +#include <plat/board.h> #ifdef CONFIG_ARCH_OMAP1 @@ -614,8 +614,8 @@ omap_otg_init(struct omap_usb_config *config) if (config->otg || config->register_host) { syscon &= ~HST_IDLE_EN; ohci_device.dev.platform_data = config; - if (cpu_is_omap730()) - ohci_resources[1].start = INT_730_USB_HHC_1; + if (cpu_is_omap7xx()) + ohci_resources[1].start = INT_7XX_USB_HHC_1; status = platform_device_register(&ohci_device); if (status) pr_debug("can't register OHCI device, %d\n", status); @@ -626,8 +626,8 @@ omap_otg_init(struct omap_usb_config *config) if (config->otg) { syscon &= ~OTG_IDLE_EN; otg_device.dev.platform_data = config; - if (cpu_is_omap730()) - otg_resources[1].start = INT_730_USB_OTG; + if (cpu_is_omap7xx()) + otg_resources[1].start = INT_7XX_USB_OTG; status = platform_device_register(&otg_device); if (status) pr_debug("can't register OTG device, %d\n", status); @@ -731,7 +731,7 @@ static inline void omap_1510_usb_init(struct omap_usb_config *config) {} void __init omap_usb_init(struct omap_usb_config *pdata) { - if (cpu_is_omap730() || cpu_is_omap16xx() || cpu_is_omap24xx()) + if (cpu_is_omap7xx() || cpu_is_omap16xx() || cpu_is_omap24xx()) omap_otg_init(pdata); else if (cpu_is_omap15xx()) omap_1510_usb_init(pdata); |