diff options
Diffstat (limited to 'arch')
40 files changed, 6153 insertions, 1541 deletions
diff --git a/arch/arm/boot/dts/aspeed/Makefile b/arch/arm/boot/dts/aspeed/Makefile index d3ac20e316d0..e51c6d203725 100644 --- a/arch/arm/boot/dts/aspeed/Makefile +++ b/arch/arm/boot/dts/aspeed/Makefile @@ -9,17 +9,21 @@ dtb-$(CONFIG_ARCH_ASPEED) += \ aspeed-bmc-ampere-mtmitchell.dtb \ aspeed-bmc-arm-stardragon4800-rep2.dtb \ aspeed-bmc-asrock-e3c246d4i.dtb \ + aspeed-bmc-asrock-e3c256d4i.dtb \ aspeed-bmc-asrock-romed8hm3.dtb \ + aspeed-bmc-asrock-spc621d8hm3.dtb \ + aspeed-bmc-asrock-x570d4u.dtb \ + aspeed-bmc-asus-x4tf.dtb \ aspeed-bmc-bytedance-g220a.dtb \ aspeed-bmc-delta-ahe50dc.dtb \ aspeed-bmc-facebook-bletchley.dtb \ - aspeed-bmc-facebook-cloudripper.dtb \ aspeed-bmc-facebook-cmm.dtb \ aspeed-bmc-facebook-elbert.dtb \ aspeed-bmc-facebook-fuji.dtb \ aspeed-bmc-facebook-galaxy100.dtb \ aspeed-bmc-facebook-greatlakes.dtb \ - aspeed-bmc-facebook-minerva-cmc.dtb \ + aspeed-bmc-facebook-harma.dtb \ + aspeed-bmc-facebook-minerva.dtb \ aspeed-bmc-facebook-minipack.dtb \ aspeed-bmc-facebook-tiogapass.dtb \ aspeed-bmc-facebook-wedge40.dtb \ @@ -33,6 +37,7 @@ dtb-$(CONFIG_ARCH_ASPEED) += \ aspeed-bmc-ibm-rainier.dtb \ aspeed-bmc-ibm-rainier-1s4u.dtb \ aspeed-bmc-ibm-rainier-4u.dtb \ + aspeed-bmc-ibm-system1.dtb \ aspeed-bmc-intel-s2600wf.dtb \ aspeed-bmc-inspur-fp5280g2.dtb \ aspeed-bmc-inspur-nf5280m6.dtb \ diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-ampere-mtmitchell.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-ampere-mtmitchell.dts index 7b540880cef9..3c8925034a8c 100644 --- a/arch/arm/boot/dts/aspeed/aspeed-bmc-ampere-mtmitchell.dts +++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-ampere-mtmitchell.dts @@ -813,7 +813,6 @@ }; &adc0 { - ref_voltage = <2500>; status = "okay"; pinctrl-names = "default"; diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-asrock-e3c246d4i.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-asrock-e3c246d4i.dts index c4b2efbfdf56..bb2e6ef609af 100644 --- a/arch/arm/boot/dts/aspeed/aspeed-bmc-asrock-e3c246d4i.dts +++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-asrock-e3c246d4i.dts @@ -83,6 +83,9 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_rgmii1_default &pinctrl_mdio1_default>; + + nvmem-cells = <ð0_macaddress>; + nvmem-cell-names = "mac-address"; }; &i2c1 { @@ -103,6 +106,12 @@ compatible = "st,24c128", "atmel,24c128"; reg = <0x57>; pagesize = <16>; + #address-cells = <1>; + #size-cells = <1>; + + eth0_macaddress: macaddress@3f80 { + reg = <0x3f80 6>; + }; }; }; diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-asrock-e3c256d4i.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-asrock-e3c256d4i.dts new file mode 100644 index 000000000000..9d00ce9475f2 --- /dev/null +++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-asrock-e3c256d4i.dts @@ -0,0 +1,322 @@ +// SPDX-License-Identifier: GPL-2.0+ +/dts-v1/; + +#include "aspeed-g5.dtsi" +#include <dt-bindings/gpio/aspeed-gpio.h> +#include <dt-bindings/i2c/i2c.h> +#include <dt-bindings/interrupt-controller/irq.h> +#include <dt-bindings/leds/common.h> +#include <dt-bindings/watchdog/aspeed-wdt.h> + +/{ + model = "ASRock E3C256D4I BMC"; + compatible = "asrock,e3c256d4i-bmc", "aspeed,ast2500"; + + aliases { + serial4 = &uart5; + + i2c20 = &i2c2mux0ch0; + i2c21 = &i2c2mux0ch1; + i2c22 = &i2c2mux0ch2; + i2c23 = &i2c2mux0ch3; + }; + + chosen { + stdout-path = &uart5; + }; + + memory@80000000 { + reg = <0x80000000 0x20000000>; + }; + + leds { + compatible = "gpio-leds"; + + /* BMC heartbeat */ + led-0 { + gpios = <&gpio ASPEED_GPIO(H, 6) GPIO_ACTIVE_LOW>; + function = LED_FUNCTION_HEARTBEAT; + color = <LED_COLOR_ID_GREEN>; + linux,default-trigger = "timer"; + }; + + /* system fault */ + led-1 { + gpios = <&gpio ASPEED_GPIO(Z, 2) GPIO_ACTIVE_LOW>; + function = LED_FUNCTION_FAULT; + color = <LED_COLOR_ID_RED>; + panic-indicator; + }; + }; + + iio-hwmon { + compatible = "iio-hwmon"; + io-channels = <&adc 0>, <&adc 1>, <&adc 2>, <&adc 3>, + <&adc 4>, <&adc 5>, <&adc 6>, <&adc 7>, + <&adc 8>, <&adc 9>, <&adc 10>, <&adc 11>, + <&adc 12>, <&adc 13>, <&adc 14>, <&adc 15>; + }; +}; + +&fmc { + status = "okay"; + flash@0 { + status = "okay"; + m25p,fast-read; + label = "bmc"; + spi-max-frequency = <100000000>; /* 100 MHz */ +#include "openbmc-flash-layout-64.dtsi" + }; +}; + +&uart1 { + status = "okay"; +}; + +&uart2 { + status = "okay"; +}; + +&uart3 { + status = "okay"; +}; + +&uart4 { + status = "okay"; +}; + +&uart5 { + status = "okay"; +}; + +&uart_routing { + status = "okay"; +}; + +&mac0 { + status = "okay"; + + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_rgmii1_default &pinctrl_mdio1_default>; + + nvmem-cells = <ð0_macaddress>; + nvmem-cell-names = "mac-address"; +}; + +&i2c0 { + status = "okay"; +}; + +&i2c1 { + status = "okay"; +}; + +&i2c2 { + status = "okay"; + + i2c-mux@70 { + compatible = "nxp,pca9545"; + reg = <0x70>; + #address-cells = <1>; + #size-cells = <0>; + + i2c2mux0ch0: i2c@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + }; + + i2c2mux0ch1: i2c@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + }; + + i2c2mux0ch2: i2c@2 { + #address-cells = <1>; + #size-cells = <0>; + reg = <2>; + }; + + i2c2mux0ch3: i2c@3 { + #address-cells = <1>; + #size-cells = <0>; + reg = <3>; + }; + }; +}; + +&i2c3 { + status = "okay"; +}; + +&i2c4 { + status = "okay"; +}; + +&i2c5 { + status = "okay"; +}; + +&i2c6 { + status = "okay"; +}; + +&i2c7 { + status = "okay"; +}; + +&i2c9 { + status = "okay"; +}; + +&i2c10 { + status = "okay"; +}; + +&i2c11 { + status = "okay"; + + vrm@60 { + compatible = "isil,isl69269"; + reg = <0x60>; + }; +}; + +&i2c12 { + status = "okay"; + + /* FRU eeprom */ + eeprom@57 { + compatible = "st,24c128", "atmel,24c128"; + reg = <0x57>; + pagesize = <16>; + #address-cells = <1>; + #size-cells = <1>; + + eth0_macaddress: macaddress@3f80 { + reg = <0x3f80 6>; + }; + }; +}; + +&video { + status = "okay"; +}; + +&vhub { + status = "okay"; +}; + +&lpc_ctrl { + status = "okay"; +}; + +&lpc_snoop { + status = "okay"; + snoop-ports = <0x80>; +}; + +&kcs3 { + status = "okay"; + aspeed,lpc-io-reg = <0xca2>; +}; + +&peci0 { + status = "okay"; +}; + +&wdt1 { + aspeed,reset-mask = <(AST2500_WDT_RESET_DEFAULT & ~AST2500_WDT_RESET_LPC)>; +}; + +&wdt2 { + aspeed,reset-mask = <(AST2500_WDT_RESET_DEFAULT & ~AST2500_WDT_RESET_LPC)>; +}; + +&pwm_tacho { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pwm0_default /* CPU */ + &pinctrl_pwm2_default /* rear */ + &pinctrl_pwm4_default>; /* front */ + + /* CPU */ + fan@0 { + reg = <0x00>; + aspeed,fan-tach-ch = /bits/ 8 <0x00>; + }; + + /* rear */ + fan@2 { + reg = <0x02>; + aspeed,fan-tach-ch = /bits/ 8 <0x02>; + }; + + /* front */ + fan@4 { + reg = <0x04>; + aspeed,fan-tach-ch = /bits/ 8 <0x04>; + }; +}; + +&gpio { + status = "okay"; + gpio-line-names = + /* A */ "", "", "NMI_BTN_N", "BMC_NMI", "", "", "", "", + /* B */ "", "", "", "", "", "", "", "", + /* C */ "", "", "", "", "", "", "", "", + /* D */ "BMC_PSIN", "BMC_PSOUT", "BMC_RESETCON", "RESETCON", + "", "", "", "", + /* E */ "", "", "", "", "", "", "", "", + /* F */ "LOCATORLED_STATUS_N", "LOCATORBTN", "", "", + "", "", "BMC_PCH_SCI_LPC", "BMC_NCSI_MUX_CTL", + /* G */ "HWM_BAT_EN", "CHASSIS_ID0", "CHASSIS_ID1", "CHASSIS_ID2", + "", "", "", "", + /* H */ "FM_ME_RCVR_N", "O_PWROK", "", "D4_DIMM_EVENT_3V_N", + "MFG_MODE_N", "BMC_RTCRST", "BMC_HB_LED_N", "BMC_CASEOPEN", + /* I */ "", "", "", "", "", "", "", "", + /* J */ "BMC_READY", "BMC_PCH_BIOS_CS_N", "BMC_SMI", "", "", "", "", "", + /* K */ "", "", "", "", "", "", "", "", + /* L */ "", "", "", "", "", "", "", "", + /* M */ "", "", "", "", "", "", "", "", + /* N */ "", "", "", "", "", "", "", "", + /* O */ "", "", "", "", "", "", "", "", + /* P */ "", "", "", "", "", "", "", "", + /* Q */ "", "", "", "", "", "", "", "", + /* R */ "", "", "", "", "", "", "", "", + /* S */ "PCHHOT_BMC_N", "", "RSMRST", "", "", "", "", "", + /* T */ "", "", "", "", "", "", "", "", + /* U */ "", "", "", "", "", "", "", "", + /* V */ "", "", "", "", "", "", "", "", + /* W */ "", "", "", "", "", "", "", "", + /* X */ "", "", "", "", "", "", "", "", + /* Y */ "SLP_S3", "SLP_S5", "", "", "", "", "", "", + /* Z */ "CPU_CATERR_BMC_N", "", "SYSTEM_FAULT_LED_N", "BMC_THROTTLE_N", + "", "", "", "", + /* AA */ "CPU1_THERMTRIP_LATCH_N", "", "CPU1_PROCHOT_N", "", + "", "", "IRQ_SMI_ACTIVE_N", "FM_BIOS_POST_CMPLT_N", + /* AB */ "", "", "ME_OVERRIDE", "BMC_DMI_MODIFY", "", "", "", "", + /* AC */ "", "", "", "", "", "", "", ""; +}; + +&adc { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_adc0_default /* 3VSB */ + &pinctrl_adc1_default /* 5VSB */ + &pinctrl_adc2_default /* CPU1 */ + &pinctrl_adc3_default /* VCCSA */ + &pinctrl_adc4_default /* VCCM */ + &pinctrl_adc5_default /* V10M */ + &pinctrl_adc6_default /* VCCIO */ + &pinctrl_adc7_default /* VCCGT */ + &pinctrl_adc8_default /* VPPM */ + &pinctrl_adc9_default /* BAT */ + &pinctrl_adc10_default /* 3V */ + &pinctrl_adc11_default /* 5V */ + &pinctrl_adc12_default /* 12V */ + &pinctrl_adc13_default /* GND */ + &pinctrl_adc14_default /* GND */ + &pinctrl_adc15_default>; /* GND */ +}; diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-asrock-romed8hm3.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-asrock-romed8hm3.dts index 9aa2de3723b5..6dd221644dc6 100644 --- a/arch/arm/boot/dts/aspeed/aspeed-bmc-asrock-romed8hm3.dts +++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-asrock-romed8hm3.dts @@ -71,6 +71,9 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_rgmii1_default &pinctrl_mdio1_default>; + + nvmem-cells = <ð0_macaddress>; + nvmem-cell-names = "mac-address"; }; &i2c0 { @@ -131,6 +134,12 @@ compatible = "st,24c128", "atmel,24c128"; reg = <0x50>; pagesize = <16>; + #address-cells = <1>; + #size-cells = <1>; + + eth0_macaddress: macaddress@3f80 { + reg = <0x3f80 6>; + }; }; }; diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-asrock-spc621d8hm3.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-asrock-spc621d8hm3.dts new file mode 100644 index 000000000000..555485871e7a --- /dev/null +++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-asrock-spc621d8hm3.dts @@ -0,0 +1,324 @@ +// SPDX-License-Identifier: GPL-2.0+ +/dts-v1/; + +#include "aspeed-g5.dtsi" +#include <dt-bindings/gpio/aspeed-gpio.h> +#include <dt-bindings/i2c/i2c.h> +#include <dt-bindings/interrupt-controller/irq.h> +#include <dt-bindings/leds/common.h> + +/{ + model = "ASRock SPC621D8HM3 BMC"; + compatible = "asrock,spc621d8hm3-bmc", "aspeed,ast2500"; + + aliases { + serial4 = &uart5; + + i2c20 = &i2c1mux0ch0; + i2c21 = &i2c1mux0ch1; + }; + + chosen { + stdout-path = &uart5; + }; + + memory@80000000 { + reg = <0x80000000 0x20000000>; + }; + + leds { + compatible = "gpio-leds"; + + /* BMC heartbeat */ + led-0 { + gpios = <&gpio ASPEED_GPIO(H, 6) GPIO_ACTIVE_LOW>; + function = LED_FUNCTION_HEARTBEAT; + color = <LED_COLOR_ID_GREEN>; + linux,default-trigger = "timer"; + }; + + /* system fault */ + led-1 { + gpios = <&gpio ASPEED_GPIO(Z, 2) GPIO_ACTIVE_LOW>; + function = LED_FUNCTION_FAULT; + color = <LED_COLOR_ID_RED>; + panic-indicator; + }; + }; + + iio-hwmon { + compatible = "iio-hwmon"; + io-channels = <&adc 0>, <&adc 1>, <&adc 2>, <&adc 3>, + <&adc 4>, <&adc 5>, <&adc 6>, <&adc 7>, + <&adc 8>, <&adc 9>, <&adc 10>, <&adc 11>, + <&adc 12>, <&adc 13>, <&adc 14>, <&adc 15>; + }; +}; + +&fmc { + status = "okay"; + flash@0 { + status = "okay"; + m25p,fast-read; + label = "bmc"; + spi-max-frequency = <50000000>; /* 50 MHz */ +#include "openbmc-flash-layout-64.dtsi" + }; +}; + +&uart5 { + status = "okay"; +}; + +&vuart { + status = "okay"; + aspeed,lpc-io-reg = <0x2f8>; + aspeed,lpc-interrupts = <3 IRQ_TYPE_LEVEL_HIGH>; +}; + +&mac0 { + status = "okay"; + + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_rgmii1_default &pinctrl_mdio1_default>; + + nvmem-cells = <ð0_macaddress>; + nvmem-cell-names = "mac-address"; +}; + +&i2c0 { + status = "okay"; +}; + +&i2c1 { + status = "okay"; + + /* hardware monitor/thermal sensor */ + temperature-sensor@29 { + compatible = "nuvoton,nct7802"; + reg = <0x29>; + }; + + /* motherboard temp sensor (TMP1, near BMC) */ + temperature-sensor@4c { + compatible = "nuvoton,w83773g"; + reg = <0x4c>; + }; + + /* motherboard FRU eeprom */ + eeprom@50 { + compatible = "st,24c128", "atmel,24c128"; + reg = <0x50>; + pagesize = <16>; + #address-cells = <1>; + #size-cells = <1>; + + eth0_macaddress: macaddress@3f80 { + reg = <0x3f80 6>; + }; + }; + + /* M.2 slot smbus mux */ + i2c-mux@71 { + compatible = "nxp,pca9545"; + reg = <0x71>; + #address-cells = <1>; + #size-cells = <0>; + + i2c1mux0ch0: i2c@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + }; + + i2c1mux0ch1: i2c@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + }; + }; +}; + +&i2c2 { + status = "okay"; +}; + +&i2c3 { + status = "okay"; +}; + +&i2c4 { + status = "okay"; +}; + +&i2c5 { + status = "okay"; +}; + +&i2c6 { + status = "okay"; +}; + +&i2c7 { + status = "okay"; +}; + +&i2c8 { + status = "okay"; +}; + +&i2c9 { + status = "okay"; +}; + +&i2c10 { + status = "okay"; +}; + +&i2c11 { + status = "okay"; +}; + +&i2c12 { + status = "okay"; +}; + +&i2c13 { + status = "okay"; +}; + +&video { + status = "okay"; +}; + +&vhub { + status = "okay"; +}; + +&lpc_ctrl { + status = "okay"; +}; + +&lpc_snoop { + status = "okay"; + snoop-ports = <0x80>; +}; + +&kcs3 { + status = "okay"; + aspeed,lpc-io-reg = <0xca2>; +}; + +&peci0 { + status = "okay"; +}; + +&pwm_tacho { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pwm0_default + &pinctrl_pwm2_default + &pinctrl_pwm3_default + &pinctrl_pwm4_default>; + + fan@0 { + reg = <0x00>; + aspeed,fan-tach-ch = /bits/ 8 <0x00>; + }; + + fan@2 { + reg = <0x02>; + aspeed,fan-tach-ch = /bits/ 8 <0x02>; + }; + + fan@3 { + reg = <0x03>; + aspeed,fan-tach-ch = /bits/ 8 <0x03>; + }; + + fan@4 { + reg = <0x04>; + aspeed,fan-tach-ch = /bits/ 8 <0x04>; + }; +}; + +&gpio { + status = "okay"; + gpio-line-names = + /* A */ "LOCATORLED_STATUS_N", "LOCATORBTN_N", + "BMC_READY_N", "FM_SPD_DDRCPU_LVLSHFT_EN", + "", "", "", "", + /* B */ "NODE_ID_1", "NODE_ID_2", "PSU_FAN_FAIL_N", "", + "", "", "", "GPIO_RST", + /* C */ "", "", "", "", "", "", "", "", + /* D */ "FP_PWR_BTN_MUX_N", "FM_BMC_PWRBTN_OUT_N", + "FP_RST_BTN_N", "RST_BMC_RSTBTN_OUT_N", + "NMI_BTN_N", "BMC_NMI", + "", "", + /* E */ "", "", "", "FM_ME_RCVR_N", "", "", "", "", + /* F */ "BMC_SMB_SEL_N", "FM_CPU2_DISABLE_COD_N", + "FM_REMOTE_DEBUG_BMC_EN", "FM_CPU_ERR0_LVT3_EN", + "FM_CPU_ERR1_LVT3_EN", "FM_CPU_ERR2_LVT3_EN", + "FM_MEM_THERM_EVENT_CPU1_LVT3_N", "FM_MEM_THERM_EVENT_CPU2_LVT3_N", + /* G */ "HWM_BAT_EN", "", "BMC_PHYRST_N", "FM_BIOS_SPI_BMC_CTRL", + "BMC_ALERT1_N", "BMC_ALERT2_N", "BMC_ALERT3_N", "IRQ_SML0_ALERT_N", + /* H */ "BMC_SMB_PRESENT_1_N", "FM_PCH_CORE_VID_0", "FM_PCH_CORE_VID_1", "", + "FM_MFG_MODE", "BMC_RTCRST", "BMC_HB_LED_N", "BMC_CASEOPEN", + /* I */ "IRQ_PVDDQ_ABCD_CPU1_VRHOT_LVC3_N", "IRQ_PVDDQ_ABCD_CPU2_VRHOT_LVC3_N", + "IRQ_PVDDQ_EFGH_CPU1_VRHOT_LVC3_N", "IRQ_PVDDQ_EFGH_CPU2_VRHOT_LVC3_N", + "", "", "", "", + /* J */ "", "", "", "", "", "", "", "", + /* K */ "", "", "", "", "", "", "", "", + /* L */ "", "", "", "", "", "", "", "", + /* M */ "FM_PVCCIN_CPU1_PWR_IN_ALERT_N", "FM_PVCCIN_CPU2_PWR_IN_ALERT_N", + "IRQ_PVCCIN_CPU1_VRHOT_LVC3_N", "IRQ_PVCCIN_CPU2_VRHOT_LVC3_N", + "FM_CPU1_PROCHOT_BMC_LVC3_N", "", + "FM_CPU1_MEMHOT_OUT_N", "FM_CPU2_MEMHOT_OUT_N", + /* N */ "", "", "", "", "", "", "", "", + /* O */ "", "", "", "", "", "", "", "", + /* P */ "", "", "", "", "", "", "", "", + /* Q */ "", "", "", "", "", "", "RST_GLB_RST_WARN_N", "PCIE_WAKE_N", + /* R */ "", "", "FM_BMC_SUSACK_N", "FM_BMC_EUP_LOT6_N", + "", "FM_BMC_PCH_SCI_LPC_N", "", "", + /* S */ "FM_DBP_PRESENT_N", "FM_CPU2_SKTOCC_LCT3_N", + "FM_CPU1_FIVR_FAULT_LVT3", "FM_CPU2_FIVR_FAULT_LVT3", + "", "", "", "", + /* T */ "", "", "", "", "", "", "", "", + /* U */ "", "", "", "", "", "", "", "", + /* V */ "", "", "", "", "", "", "", "", + /* W */ "", "", "", "", "", "", "", "", + /* X */ "", "", "", "", "", "", "", "", + /* Y */ "FM_SLPS3_N", "FM_SLPS4_N", "", "FM_BMC_ONCTL_N_PLD", + "", "", "", "", + /* Z */ "FM_CPU_MSMI_CATERR_LVT3_N", "", "SYSTEM_FAULT_LED_N", "BMC_THROTTLE_N", + "", "", "", "", + /* AA */ "FM_CPU1_THERMTRIP_LATCH_LVT3_N", "FM_CPU2_THERMTRIP_LATCH_LVT3_N", + "FM_BIOS_POST_COMPLT_N", "DBP_BMC_SYSPWROK", + "", "IRQ_SML0_ALERT_MUX_N", + "IRQ_SMI_ACTIVE_N", "IRQ_NMI_EVENT_N", + /* AB */ "FM_PCH_BMC_THERMTRIP_N", "PWRGD_SYS_PWROK", + "ME_OVERRIDE", "IRQ_BMC_PCH_SMI_LPC_N", + "", "", "", "", + /* AC */ "", "", "", "", "", "", "", ""; +}; + +&adc { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_adc0_default /* 3VSB */ + &pinctrl_adc1_default /* 5VSB */ + &pinctrl_adc2_default /* CPU1 */ + &pinctrl_adc3_default /* NC */ + &pinctrl_adc4_default /* VCCMABCD */ + &pinctrl_adc5_default /* VCCMEFGH */ + &pinctrl_adc6_default /* NC */ + &pinctrl_adc7_default /* NC */ + &pinctrl_adc8_default /* PVNN_PCH */ + &pinctrl_adc9_default /* 1P05PCH */ + &pinctrl_adc10_default /* 1P8PCH */ + &pinctrl_adc11_default /* BAT */ + &pinctrl_adc12_default /* 3V */ + &pinctrl_adc13_default /* 5V */ + &pinctrl_adc14_default /* 12V */ + &pinctrl_adc15_default>; /* GND */ +}; diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-asrock-x570d4u.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-asrock-x570d4u.dts new file mode 100644 index 000000000000..8dee4faa9e07 --- /dev/null +++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-asrock-x570d4u.dts @@ -0,0 +1,360 @@ +// SPDX-License-Identifier: GPL-2.0+ +/dts-v1/; +#include "aspeed-g5.dtsi" +#include <dt-bindings/gpio/aspeed-gpio.h> +#include <dt-bindings/leds/common.h> + +/ { + model = "Asrock Rack X570D4U BMC"; + compatible = "asrock,x570d4u-bmc", "aspeed,ast2500"; + + aliases { + i2c40 = &i2c4mux0ch0; + i2c41 = &i2c4mux0ch1; + i2c42 = &i2c4mux0ch2; + i2c43 = &i2c4mux0ch3; + }; + + chosen { + stdout-path = &uart5; + }; + + memory@80000000 { + reg = <0x80000000 0x20000000>; + }; + + reserved-memory { + #address-cells = <1>; + #size-cells = <1>; + ranges; + + pci_memory: region@9a000000 { + no-map; + reg = <0x9a000000 0x00010000>; /* 64K */ + }; + + video_engine_memory: jpegbuffer { + size = <0x02800000>; /* 40M */ + alignment = <0x01000000>; + compatible = "shared-dma-pool"; + reusable; + }; + + gfx_memory: framebuffer { + size = <0x01000000>; + alignment = <0x01000000>; + compatible = "shared-dma-pool"; + reusable; + }; + }; + + leds { + compatible = "gpio-leds"; + + led-0 { + /* led-heartbeat-n */ + gpios = <&gpio ASPEED_GPIO(H, 6) GPIO_ACTIVE_LOW>; + color = <LED_COLOR_ID_GREEN>; + function = LED_FUNCTION_HEARTBEAT; + linux,default-trigger = "timer"; + }; + + led-1 { + /* led-fault-n */ + gpios = <&gpio ASPEED_GPIO(Z, 2) GPIO_ACTIVE_LOW>; + color = <LED_COLOR_ID_AMBER>; + function = LED_FUNCTION_FAULT; + panic-indicator; + }; + }; + + iio-hwmon { + compatible = "iio-hwmon"; + io-channels = <&adc 0>, <&adc 1>, <&adc 2>, <&adc 3>, <&adc 4>, + <&adc 5>, <&adc 6>, <&adc 7>, <&adc 8>, <&adc 9>, + <&adc 10>, <&adc 11>, <&adc 12>; + }; +}; + +&gpio { + status = "okay"; + gpio-line-names = + /* A */ "input-locatorled-n", "", "", "", "", "", "", "", + /* B */ "input-bios-post-cmplt-n", "", "", "", "", "", "", "", + /* C */ "", "", "", "", "", "", "control-locatorbutton-n", "", + /* D */ "button-power-n", "control-power-n", "button-reset-n", + "control-reset-n", "", "", "", "", + /* E */ "", "", "", "", "", "", "", "", + /* F */ "", "", "", "", "", "", "", "", + /* G */ "output-hwm-vbat-enable", "input-id0-n", "input-id1-n", + "input-id2-n", "input-aux-smb-alert-n", "", + "input-psu-smb-alert-n", "", + /* H */ "", "", "", "", "input-mfg-mode-n", "", + "led-heartbeat-n", "input-case-open-n", + /* I */ "", "", "", "", "", "", "", "", + /* J */ "output-bmc-ready-n", "", "", "", "", "", "", "", + /* K */ "", "", "", "", "", "", "", "", + /* L */ "", "", "", "", "", "", "", "", + /* M */ "", "", "", "", "", "", "", "", + /* N */ "", "", "", "", "", "", "", "", + /* O */ "", "", "", "", "", "", "", "", + /* P */ "", "", "", "", "", "", "", "", + /* Q */ "", "", "", "", "input-bmc-smb-present-n", "", "", + "input-pcie-wake-n", + /* R */ "", "", "", "", "", "", "", "", + /* S */ "input-bmc-pchhot-n", "", "", "", "", "", "", "", + /* T */ "", "", "", "", "", "", "", "", + /* U */ "", "", "", "", "", "", "", "", + /* V */ "", "", "", "", "", "", "", "", + /* W */ "", "", "", "", "", "", "", "", + /* X */ "", "", "", "", "", "", "", "", + /* Y */ "input-sleep-s3-n", "input-sleep-s5-n", "", "", "", "", + "", "", + /* Z */ "", "", "led-fault-n", "output-bmc-throttle-n", "", "", + "", "", + /* AA */ "input-cpu1-thermtrip-latch-n", "", + "input-cpu1-prochot-n", "", "", "", "", "", + /* AB */ "", "input-power-good", "", "", "", "", "", "", + /* AC */ "", "", "", "", "", "", "", ""; +}; + +&fmc { + status = "okay"; + flash@0 { + status = "okay"; + label = "bmc"; + m25p,fast-read; + spi-max-frequency = <10000000>; +#include "openbmc-flash-layout-64.dtsi" + }; +}; + +&uart5 { + status = "okay"; +}; + +&vuart { + status = "okay"; +}; + +&mac0 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_rgmii1_default &pinctrl_mdio1_default>; + + nvmem-cells = <ð0_macaddress>; + nvmem-cell-names = "mac-address"; +}; + +&mac1 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_rmii2_default &pinctrl_mdio2_default>; + use-ncsi; + + nvmem-cells = <ð1_macaddress>; + nvmem-cell-names = "mac-address"; +}; + +&i2c0 { + /* SMBus on auxiliary panel header (AUX_PANEL1) */ + status = "okay"; +}; + +&i2c1 { + /* Hardware monitoring SMBus */ + status = "okay"; + + w83773g@4c { + compatible = "nuvoton,w83773g"; + reg = <0x4c>; + }; +}; + +&i2c2 { + /* PSU SMBus (PSU_SMB1) */ + status = "okay"; +}; + +&i2c3 { + status = "okay"; +}; + +&i2c4 { + status = "okay"; + + i2c-mux@70 { + compatible = "nxp,pca9545"; + reg = <0x70>; + #address-cells = <1>; + #size-cells = <0>; + + i2c4mux0ch0: i2c@0 { + /* SMBus on PCI express 16x slot */ + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + }; + + i2c4mux0ch1: i2c@1 { + /* SMBus on PCI express 8x slot */ + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + }; + + i2c4mux0ch2: i2c@2 { + /* Unknown */ + #address-cells = <1>; + #size-cells = <0>; + reg = <2>; + }; + + i2c4mux0ch3: i2c@3 { + /* SMBus on PCI express 1x slot */ + #address-cells = <1>; + #size-cells = <0>; + reg = <3>; + }; + }; +}; + +&i2c5 { + /* SMBus on BMC connector (BMC_SMB_1) */ + status = "okay"; +}; + +&i2c7 { + /* FRU and SPD EEPROM SMBus */ + status = "okay"; + + eeprom@57 { + compatible = "st,24c128", "atmel,24c128"; + reg = <0x57>; + pagesize = <16>; + #address-cells = <1>; + #size-cells = <1>; + + eth0_macaddress: macaddress@3f80 { + reg = <0x3f80 6>; + }; + + eth1_macaddress: macaddress@3f88 { + reg = <0x3f88 6>; + }; + }; +}; + +&i2c8 { + /* SMBus on intelligent platform management bus header (IPMB_1) */ + status = "okay"; +}; + +&gfx { + status = "okay"; +}; + +&pinctrl { + aspeed,external-nodes = <&gfx &lhc>; +}; + +&vhub { + status = "okay"; +}; + +&ehci1 { + status = "okay"; +}; + +&uhci { + status = "okay"; +}; + +&kcs3 { + aspeed,lpc-io-reg = <0xca2>; + status = "okay"; +}; + +&lpc_ctrl { + status = "okay"; +}; + +&lpc_snoop { + status = "okay"; + snoop-ports = <0x80>; +}; + +&p2a { + status = "okay"; + memory-region = <&pci_memory>; +}; + +&video { + status = "okay"; + memory-region = <&video_engine_memory>; +}; + +&pwm_tacho { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pwm0_default + &pinctrl_pwm1_default + &pinctrl_pwm2_default + &pinctrl_pwm3_default + &pinctrl_pwm4_default + &pinctrl_pwm5_default>; + + fan@0 { + /* FAN1 (4-pin) */ + reg = <0x00>; + aspeed,fan-tach-ch = /bits/ 8 <0x00>; + }; + + fan@1 { + /* FAN2 (4-pin) */ + reg = <0x01>; + aspeed,fan-tach-ch = /bits/ 8 <0x01>; + }; + + fan@2 { + /* FAN3 (4-pin) */ + reg = <0x02>; + aspeed,fan-tach-ch = /bits/ 8 <0x02>; + }; + + fan@3 { + /* FAN4 (6-pin) */ + reg = <0x03>; + aspeed,fan-tach-ch = /bits/ 8 <0x04 0x0b>; + }; + + fan@4 { + /* FAN6 (6-pin) */ + reg = <0x04>; + aspeed,fan-tach-ch = /bits/ 8 <0x06 0x0d>; + }; + + fan@5 { + /* FAN5 (6-pin) */ + reg = <0x05>; + aspeed,fan-tach-ch = /bits/ 8 <0x05 0x0c>; + }; +}; + +&adc { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_adc0_default /* 3VSB */ + &pinctrl_adc1_default /* 5VSB */ + &pinctrl_adc2_default /* VCPU */ + &pinctrl_adc3_default /* VSOC */ + &pinctrl_adc4_default /* VCCM */ + &pinctrl_adc5_default /* APU-VDDP */ + &pinctrl_adc6_default /* PM-VDD-CLDO */ + &pinctrl_adc7_default /* PM-VDDCR-S5 */ + &pinctrl_adc8_default /* PM-VDDCR */ + &pinctrl_adc9_default /* VBAT */ + &pinctrl_adc10_default /* 3V */ + &pinctrl_adc11_default /* 5V */ + &pinctrl_adc12_default>; /* 12V */ +}; diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-asus-x4tf.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-asus-x4tf.dts new file mode 100644 index 000000000000..64f4ed07c7d2 --- /dev/null +++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-asus-x4tf.dts @@ -0,0 +1,581 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +// Copyright 2024 ASUS Corp. + +/dts-v1/; + +#include "aspeed-g6.dtsi" +#include "aspeed-g6-pinctrl.dtsi" +#include <dt-bindings/i2c/i2c.h> +#include <dt-bindings/gpio/aspeed-gpio.h> + +/ { + model = "ASUS-X4TF"; + compatible = "asus,x4tf-bmc", "aspeed,ast2600"; + + aliases { + serial4 = &uart5; + }; + + chosen { + stdout-path = "serial4:115200n8"; + }; + + memory@80000000 { + device_type = "memory"; + reg = <0x80000000 0x40000000>; + }; + + reserved-memory { + #address-cells = <1>; + #size-cells = <1>; + ranges; + + video_engine_memory: video { + size = <0x04000000>; + alignment = <0x01000000>; + compatible = "shared-dma-pool"; + reusable; + }; + }; + + iio-hwmon { + compatible = "iio-hwmon"; + io-channels = <&adc0 0>, <&adc0 1>, <&adc0 2>, <&adc0 3>, + <&adc0 4>, <&adc0 5>, <&adc0 6>, <&adc0 7>, + <&adc1 0>, <&adc1 1>, <&adc1 2>, <&adc1 3>, + <&adc1 4>, <&adc1 5>, <&adc1 6>, <&adc1 7>; + }; + + leds { + compatible = "gpio-leds"; + + led-heartbeat { + gpios = <&gpio0 ASPEED_GPIO(P, 7) GPIO_ACTIVE_LOW>; + linux,default-trigger = "heartbeat"; + }; + + led-uid { + gpios = <&gpio0 ASPEED_GPIO(P, 1) (GPIO_ACTIVE_LOW | GPIO_OPEN_DRAIN)>; + default-state = "off"; + }; + + led-status_Y { + gpios = <&gpio1 ASPEED_GPIO(B, 1) GPIO_ACTIVE_LOW>; + default-state = "off"; + }; + + led-sys_boot_status { + gpios = <&gpio1 ASPEED_GPIO(B, 0) GPIO_ACTIVE_LOW>; + default-state = "off"; + }; + }; +}; + +&adc0 { + vref = <2500>; + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_adc0_default &pinctrl_adc1_default + &pinctrl_adc2_default &pinctrl_adc3_default + &pinctrl_adc4_default &pinctrl_adc5_default + &pinctrl_adc6_default &pinctrl_adc7_default>; +}; + +&adc1 { + vref = <2500>; + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_adc8_default &pinctrl_adc9_default + &pinctrl_adc10_default &pinctrl_adc11_default + &pinctrl_adc12_default &pinctrl_adc13_default + &pinctrl_adc14_default &pinctrl_adc15_default>; +}; + +&peci0 { + status = "okay"; +}; + +&lpc_snoop { + snoop-ports = <0x80>; + status = "okay"; +}; + +&mac2 { + status = "okay"; + phy-mode = "rmii"; + use-ncsi; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_rmii3_default>; +}; + +&mac3 { + status = "okay"; + phy-mode = "rmii"; + use-ncsi; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_rmii4_default>; +}; + +&fmc { + status = "okay"; + + flash@0 { + status = "okay"; + m25p,fast-read; + label = "bmc"; + spi-max-frequency = <50000000>; +#include "openbmc-flash-layout-64.dtsi" + }; +}; + +&spi1 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_spi1_default>; + + flash@0 { + status = "okay"; + label = "bios"; + spi-max-frequency = <50000000>; + }; +}; + +&i2c0 { + status = "okay"; +}; + +&i2c1 { + status = "okay"; +}; + +&i2c2 { + status = "okay"; +}; + +&i2c3 { + status = "okay"; +}; + +&i2c4 { + status = "okay"; + + temperature-sensor@48 { + compatible = "ti,tmp75"; + reg = <0x48>; + }; + + temperature-sensor@49 { + compatible = "ti,tmp75"; + reg = <0x49>; + }; + + pca9555_4_20: gpio@20 { + compatible = "nxp,pca9555"; + reg = <0x20>; + gpio-controller; + #gpio-cells = <2>; + }; + + pca9555_4_22: gpio@22 { + compatible = "nxp,pca9555"; + reg = <0x22>; + gpio-controller; + #gpio-cells = <2>; + }; + + pca9555_4_24: gpio@24 { + compatible = "nxp,pca9555"; + reg = <0x24>; + gpio-controller; + #gpio-cells = <2>; + gpio-line-names = + /*A0 - A3 0*/ "", "STRAP_BMC_BATTERY_GPIO1", "", "", + /*A4 - A7 4*/ "", "", "", "", + /*B0 - B7 8*/ "", "", "", "", "", "", "", ""; + }; + + pca9555_4_26: gpio@26 { + compatible = "nxp,pca9555"; + reg = <0x26>; + gpio-controller; + #gpio-cells = <2>; + }; + + i2c-mux@70 { + compatible = "nxp,pca9546"; + status = "okay"; + reg = <0x70>; + #address-cells = <1>; + #size-cells = <0>; + + channel_1: i2c@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + }; + + channel_2: i2c@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + }; + + channel_3: i2c@2 { + #address-cells = <1>; + #size-cells = <0>; + reg = <2>; + }; + + channel_4: i2c@3 { + #address-cells = <1>; + #size-cells = <0>; + reg = <3>; + }; + }; +}; + +&i2c5 { + status = "okay"; + + pca9555_5_24: gpio@24 { + compatible = "nxp,pca9555"; + reg = <0x24>; + gpio-controller; + #gpio-cells = <2>; + }; + + i2c-mux@70 { + compatible = "nxp,pca9546"; + status = "okay"; + reg = <0x70 >; + #address-cells = <1>; + #size-cells = <0>; + + channel_5: i2c@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + + pca9555_5_5_20: gpio@20 { + compatible = "nxp,pca9555"; + reg = <0x20>; + gpio-controller; + #gpio-cells = <2>; + gpio-line-names = + "", "", "", "", "", "", "", "", + "", "", "SYS_FAN6", "SYS_FAN5", + "SYS_FAN4", "SYS_FAN3", + "SYS_FAN2", "SYS_FAN1"; + }; + + pca9555_5_5_21: gpio@21 { + compatible = "nxp,pca9555"; + reg = <0x21>; + gpio-controller; + #gpio-cells = <2>; + }; + + power-monitor@44 { + compatible = "ti,ina219"; + reg = <0x44>; + shunt-resistor = <2>; + }; + }; + + channel_6: i2c@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + }; + + channel_7: i2c@2 { + #address-cells = <1>; + #size-cells = <0>; + reg = <2>; + }; + + channel_8: i2c@3 { + #address-cells = <1>; + #size-cells = <0>; + reg = <3>; + }; + }; +}; + +&i2c6 { + status = "okay"; + + pca9555_6_27: gpio@27 { + compatible = "nxp,pca9555"; + reg = <0x27>; + gpio-controller; + #gpio-cells = <2>; + }; + + pca9555_6_20: gpio@20 { + compatible = "nxp,pca9555"; + reg = <0x20>; + gpio-controller; + #gpio-cells = <2>; + gpio-line-names = + /*A0 0*/ "", "", "", "", "", "", "", "", + /*B0 8*/ "Drive_NVMe1", "Drive_NVMe2", "", "", + /*B4 12*/ "", "", "", ""; + }; + + pca9555_6_21: gpio@21 { + compatible = "nxp,pca9555"; + reg = <0x21>; + gpio-controller; + #gpio-cells = <2>; + }; +}; + +&i2c7 { + status = "okay"; + + i2c-mux@70 { + compatible = "nxp,pca9546"; + status = "okay"; + reg = <0x70>; + #address-cells = <1>; + #size-cells = <0>; + idle-state = <1>; + + channel_9: i2c@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + + temperature-sensor@48 { + compatible = "ti,tmp75"; + reg = <0x48>; + }; + + temperature-sensor@49 { + compatible = "ti,tmp75"; + reg = <0x49>; + }; + + power-monitor@40 { + compatible = "ti,ina219"; + reg = <0x40>; + shunt-resistor = <2>; + }; + + power-monitor@41 { + compatible = "ti,ina219"; + reg = <0x41>; + shunt-resistor = <5>; + }; + }; + + channel_10: i2c@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + }; + + channel_11: i2c@2 { + #address-cells = <1>; + #size-cells = <0>; + reg = <2>; + }; + + channel_12: i2c@3 { + #address-cells = <1>; + #size-cells = <0>; + reg = <3>; + }; + }; + + i2c-mux@71 { + compatible = "nxp,pca9546"; + status = "okay"; + reg = <0x71>; + #address-cells = <1>; + #size-cells = <0>; + i2c-mux-idle-disconnect; + + channel_13: i2c@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + }; + + channel_14: i2c@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + }; + + channel_15: i2c@2 { + #address-cells = <1>; + #size-cells = <0>; + reg = <2>; + }; + + channel_16: i2c@3 { + #address-cells = <1>; + #size-cells = <0>; + reg = <3>; + }; + }; +}; + +&i2c8 { + status = "okay"; + + i2c-mux@70 { + compatible = "nxp,pca9546"; + status = "okay"; + reg = <0x70>; + #address-cells = <1>; + #size-cells = <0>; + i2c-mux-idle-disconnect; + + channel_17: i2c@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + }; + + channel_18: i2c@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + + temperature-sensor@48 { + compatible = "ti,tmp75"; + reg = <0x48>; + }; + + power-monitor@41 { + compatible = "ti,ina219"; + reg = <0x41>; + shunt-resistor = <5>; + }; + }; + + channel_19: i2c@2 { + #address-cells = <1>; + #size-cells = <0>; + reg = <2>; + }; + + channel_20: i2c@3 { + #address-cells = <1>; + #size-cells = <0>; + reg = <3>; + }; + }; +}; + +&i2c9 { + status = "okay"; +}; + +&i2c10 { + status = "okay"; +}; + +&i2c11 { + status = "okay"; +}; + +&i2c14 { + status = "okay"; + multi-master; + + eeprom@50 { + compatible = "atmel,24c08"; + reg = <0x50>; + }; + + eeprom@51 { + compatible = "atmel,24c08"; + reg = <0x51>; + }; +}; + +&sgpiom0 { + status = "okay"; + ngpios = <128>; +}; + +&video { + status = "okay"; + memory-region = <&video_engine_memory>; +}; + +&sdc { + status = "okay"; +}; + +&lpc_snoop { + status = "okay"; + snoop-ports = <0x80>; +}; + +&kcs1 { + aspeed,lpc-io-reg = <0xca0>; + status = "okay"; +}; + +&kcs2 { + aspeed,lpc-io-reg = <0xca8>; + status = "okay"; +}; + +&kcs3 { + aspeed,lpc-io-reg = <0xca2>; + status = "okay"; +}; + +&uart3 { + status = "okay"; +}; + +&uart5 { + status = "okay"; +}; + +&uart_routing { + status = "okay"; +}; + +&vhub { + status = "okay"; +}; + +&gpio0 { + gpio-line-names = + /*A0 0*/ "", "", "", "", "", "", "", "", + /*B0 8*/ "", "", "", "", "", "", "PS_PWROK", "", + /*C0 16*/ "", "", "", "", "", "", "", "", + /*D0 24*/ "", "", "", "", "", "", "", "", + /*E0 32*/ "", "", "", "", "", "", "", "", + /*F0 40*/ "", "", "", "", "", "", "", "", + /*G0 48*/ "", "", "", "", "", "", "", "", + /*H0 56*/ "", "", "", "", "", "", "", "", + /*I0 64*/ "", "", "", "", "", "", "", "", + /*J0 72*/ "", "", "", "", "", "", "", "", + /*K0 80*/ "", "", "", "", "", "", "", "", + /*L0 88*/ "", "", "", "", "", "", "", "", + /*M0 96*/ "", "", "", "", "", "", "", "", + /*N0 104*/ "", "", "", "", + /*N4 108*/ "POST_COMPLETE", "ESR1_GPIO_AST_SPISEL", "", "", + /*O0 112*/ "", "", "", "", "", "", "", "", + /*P0 120*/ "ID_BUTTON", "ID_OUT", "POWER_BUTTON", "POWER_OUT", + /*P4 124*/ "RESET_BUTTON", "RESET_OUT", "", "HEARTBEAT", + /*Q0 128*/ "", "", "", "", "", "", "", "", + /*R0 136*/ "", "", "", "", "", "", "", "", + /*S0 144*/ "", "", "", "", "", "", "", "", + /*T0 152*/ "", "", "", "", "", "", "", "", + /*U0 160*/ "", "", "", "", "", "", "", "", + /*V0 168*/ "", "", "", "", "", "", "", "", + /*W0 176*/ "", "", "", "", "", "", "", "", + /*X0 184*/ "", "", "", "", "", "", "", "", + /*Y0 192*/ "", "", "", "", "", "", "", "", + /*Z0 200*/ "", "", "", "", "", "", "", ""; +}; diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-delta-ahe50dc.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-delta-ahe50dc.dts index e830fec0570f..b6bfdaea08e6 100644 --- a/arch/arm/boot/dts/aspeed/aspeed-bmc-delta-ahe50dc.dts +++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-delta-ahe50dc.dts @@ -18,7 +18,7 @@ reg = <0x##hexaddr>; \ shunt-resistor-micro-ohms = <675>; \ regulators { \ - efuse##num: vout0 { \ + efuse##num: vout { \ regulator-name = __stringify(efuse##num##-reg); \ }; \ }; \ diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-cloudripper.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-cloudripper.dts deleted file mode 100644 index d49328fa487a..000000000000 --- a/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-cloudripper.dts +++ /dev/null @@ -1,544 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0+ -// Copyright (c) 2020 Facebook Inc. - -/dts-v1/; - -#include <dt-bindings/leds/common.h> -#include "ast2600-facebook-netbmc-common.dtsi" - -/ { - model = "Facebook Cloudripper BMC"; - compatible = "facebook,cloudripper-bmc", "aspeed,ast2600"; - - aliases { - /* - * PCA9548 (1-0070) provides 8 channels connecting to - * SMB (Switch Main Board). - */ - i2c16 = &imux16; - i2c17 = &imux17; - i2c18 = &imux18; - i2c19 = &imux19; - i2c20 = &imux20; - i2c21 = &imux21; - i2c22 = &imux22; - i2c23 = &imux23; - - /* - * PCA9548 (2-0070) provides 8 channels connecting to - * SCM (System Controller Module). - */ - i2c24 = &imux24; - i2c25 = &imux25; - i2c26 = &imux26; - i2c27 = &imux27; - i2c28 = &imux28; - i2c29 = &imux29; - i2c30 = &imux30; - i2c31 = &imux31; - - /* - * PCA9548 (3-0070) provides 8 channels connecting to - * SMB (Switch Main Board). - */ - i2c32 = &imux32; - i2c33 = &imux33; - i2c34 = &imux34; - i2c35 = &imux35; - i2c36 = &imux36; - i2c37 = &imux37; - i2c38 = &imux38; - i2c39 = &imux39; - - /* - * PCA9548 (8-0070) provides 8 channels connecting to - * PDB (Power Delivery Board). - */ - i2c40 = &imux40; - i2c41 = &imux41; - i2c42 = &imux42; - i2c43 = &imux43; - i2c44 = &imux44; - i2c45 = &imux45; - i2c46 = &imux46; - i2c47 = &imux47; - - /* - * PCA9548 (15-0076) provides 8 channels connecting to - * FCM (Fan Controller Module). - */ - i2c48 = &imux48; - i2c49 = &imux49; - i2c50 = &imux50; - i2c51 = &imux51; - i2c52 = &imux52; - i2c53 = &imux53; - i2c54 = &imux54; - i2c55 = &imux55; - }; - - spi_gpio: spi { - num-chipselects = <2>; - cs-gpios = <&gpio0 ASPEED_GPIO(X, 0) GPIO_ACTIVE_LOW>, - <&gpio0 ASPEED_GPIO(X, 1) GPIO_ACTIVE_HIGH>; - - eeprom@1 { - compatible = "atmel,at93c46d"; - spi-max-frequency = <250000>; - data-size = <16>; - spi-cs-high; - reg = <1>; - }; - }; -}; - -&ehci1 { - status = "okay"; -}; - -/* - * "mdio1" is connected to the MDC/MDIO interface of the on-board - * management switch (whose ports are connected to BMC, Host and front - * panel ethernet port). - */ -&mdio1 { - status = "okay"; -}; - -&mdio3 { - status = "okay"; - - ethphy1: ethernet-phy@13 { - compatible = "ethernet-phy-ieee802.3-c22"; - reg = <0x0d>; - }; -}; - -&mac3 { - status = "okay"; - phy-mode = "rgmii"; - phy-handle = <ðphy1>; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_rgmii4_default>; -}; - -&i2c0 { - multi-master; - bus-frequency = <1000000>; -}; - -&i2c1 { - /* - * PCA9548 (1-0070) provides 8 channels connecting to SMB (Switch - * Main Board). - */ - i2c-mux@70 { - compatible = "nxp,pca9548"; - #address-cells = <1>; - #size-cells = <0>; - reg = <0x70>; - i2c-mux-idle-disconnect; - - imux16: i2c@0 { - #address-cells = <1>; - #size-cells = <0>; - reg = <0>; - }; - - imux17: i2c@1 { - #address-cells = <1>; - #size-cells = <0>; - reg = <1>; - }; - - imux18: i2c@2 { - #address-cells = <1>; - #size-cells = <0>; - reg = <2>; - }; - - imux19: i2c@3 { - #address-cells = <1>; - #size-cells = <0>; - reg = <3>; - }; - - imux20: i2c@4 { - #address-cells = <1>; - #size-cells = <0>; - reg = <4>; - }; - - imux21: i2c@5 { - #address-cells = <1>; - #size-cells = <0>; - reg = <5>; - }; - - imux22: i2c@6 { - #address-cells = <1>; - #size-cells = <0>; - reg = <6>; - }; - - imux23: i2c@7 { - #address-cells = <1>; - #size-cells = <0>; - reg = <7>; - }; - }; -}; - -&i2c2 { - /* - * PCA9548 (2-0070) provides 8 channels connecting to SCM (System - * Controller Module). - */ - i2c-mux@70 { - compatible = "nxp,pca9548"; - #address-cells = <1>; - #size-cells = <0>; - reg = <0x70>; - i2c-mux-idle-disconnect; - - imux24: i2c@0 { - #address-cells = <1>; - #size-cells = <0>; - reg = <0>; - }; - - imux25: i2c@1 { - #address-cells = <1>; - #size-cells = <0>; - reg = <1>; - }; - - imux26: i2c@2 { - #address-cells = <1>; - #size-cells = <0>; - reg = <2>; - }; - - imux27: i2c@3 { - #address-cells = <1>; - #size-cells = <0>; - reg = <3>; - }; - - imux28: i2c@4 { - #address-cells = <1>; - #size-cells = <0>; - reg = <4>; - }; - - imux29: i2c@5 { - #address-cells = <1>; - #size-cells = <0>; - reg = <5>; - }; - - imux30: i2c@6 { - #address-cells = <1>; - #size-cells = <0>; - reg = <6>; - }; - - imux31: i2c@7 { - #address-cells = <1>; - #size-cells = <0>; - reg = <7>; - }; - }; -}; - -&i2c3 { - /* - * PCA9548 (3-0070) provides 8 channels connecting to SMB (Switch - * Main Board). - */ - i2c-mux@70 { - compatible = "nxp,pca9548"; - #address-cells = <1>; - #size-cells = <0>; - reg = <0x70>; - i2c-mux-idle-disconnect; - - imux32: i2c@0 { - #address-cells = <1>; - #size-cells = <0>; - reg = <0>; - }; - - imux33: i2c@1 { - #address-cells = <1>; - #size-cells = <0>; - reg = <1>; - }; - - imux34: i2c@2 { - #address-cells = <1>; - #size-cells = <0>; - reg = <2>; - }; - - imux35: i2c@3 { - #address-cells = <1>; - #size-cells = <0>; - reg = <3>; - }; - - imux36: i2c@4 { - #address-cells = <1>; - #size-cells = <0>; - reg = <4>; - }; - - imux37: i2c@5 { - #address-cells = <1>; - #size-cells = <0>; - reg = <5>; - }; - - imux38: i2c@6 { - #address-cells = <1>; - #size-cells = <0>; - reg = <6>; - }; - - imux39: i2c@7 { - #address-cells = <1>; - #size-cells = <0>; - reg = <7>; - }; - }; -}; - -&i2c6 { - lp5012@14 { - compatible = "ti,lp5012"; - reg = <0x14>; - #address-cells = <1>; - #size-cells = <0>; - - multi-led@0 { - #address-cells = <1>; - #size-cells = <0>; - reg = <0>; - color = <LED_COLOR_ID_MULTI>; - function = LED_FUNCTION_ACTIVITY; - label = "sys"; - - led@0 { - reg = <0>; - color = <LED_COLOR_ID_RED>; - }; - - led@1 { - reg = <1>; - color = <LED_COLOR_ID_BLUE>; - }; - - led@2 { - reg = <2>; - color = <LED_COLOR_ID_GREEN>; - }; - }; - - multi-led@1 { - #address-cells = <1>; - #size-cells = <0>; - reg = <1>; - color = <LED_COLOR_ID_MULTI>; - function = LED_FUNCTION_ACTIVITY; - label = "fan"; - - led@0 { - reg = <0>; - color = <LED_COLOR_ID_RED>; - }; - - led@1 { - reg = <1>; - color = <LED_COLOR_ID_BLUE>; - }; - - led@2 { - reg = <2>; - color = <LED_COLOR_ID_GREEN>; - }; - }; - - multi-led@2 { - #address-cells = <1>; - #size-cells = <0>; - reg = <2>; - color = <LED_COLOR_ID_MULTI>; - function = LED_FUNCTION_ACTIVITY; - label = "psu"; - - led@0 { - reg = <0>; - color = <LED_COLOR_ID_RED>; - }; - - led@1 { - reg = <1>; - color = <LED_COLOR_ID_BLUE>; - }; - - led@2 { - reg = <2>; - color = <LED_COLOR_ID_GREEN>; - }; - }; - - multi-led@3 { - #address-cells = <1>; - #size-cells = <0>; - reg = <3>; - color = <LED_COLOR_ID_MULTI>; - function = LED_FUNCTION_ACTIVITY; - label = "scm"; - - led@0 { - reg = <0>; - color = <LED_COLOR_ID_RED>; - }; - - led@1 { - reg = <1>; - color = <LED_COLOR_ID_BLUE>; - }; - - led@2 { - reg = <2>; - color = <LED_COLOR_ID_GREEN>; - }; - }; - }; -}; - -&i2c8 { - /* - * PCA9548 (8-0070) provides 8 channels connecting to PDB (Power - * Delivery Board). - */ - i2c-mux@70 { - compatible = "nxp,pca9548"; - #address-cells = <1>; - #size-cells = <0>; - reg = <0x70>; - i2c-mux-idle-disconnect; - - imux40: i2c@0 { - #address-cells = <1>; - #size-cells = <0>; - reg = <0>; - }; - - imux41: i2c@1 { - #address-cells = <1>; - #size-cells = <0>; - reg = <1>; - }; - - imux42: i2c@2 { - #address-cells = <1>; - #size-cells = <0>; - reg = <2>; - }; - - imux43: i2c@3 { - #address-cells = <1>; - #size-cells = <0>; - reg = <3>; - }; - - imux44: i2c@4 { - #address-cells = <1>; - #size-cells = <0>; - reg = <4>; - }; - - imux45: i2c@5 { - #address-cells = <1>; - #size-cells = <0>; - reg = <5>; - }; - - imux46: i2c@6 { - #address-cells = <1>; - #size-cells = <0>; - reg = <6>; - }; - - imux47: i2c@7 { - #address-cells = <1>; - #size-cells = <0>; - reg = <7>; - }; - - }; -}; - -&i2c15 { - /* - * PCA9548 (15-0076) provides 8 channels connecting to FCM (Fan - * Controller Module). - */ - i2c-mux@76 { - compatible = "nxp,pca9548"; - #address-cells = <1>; - #size-cells = <0>; - reg = <0x76>; - i2c-mux-idle-disconnect; - - imux48: i2c@0 { - #address-cells = <1>; - #size-cells = <0>; - reg = <0>; - }; - - imux49: i2c@1 { - #address-cells = <1>; - #size-cells = <0>; - reg = <1>; - }; - - imux50: i2c@2 { - #address-cells = <1>; - #size-cells = <0>; - reg = <2>; - }; - - imux51: i2c@3 { - #address-cells = <1>; - #size-cells = <0>; - reg = <3>; - }; - - imux52: i2c@4 { - #address-cells = <1>; - #size-cells = <0>; - reg = <4>; - }; - - imux53: i2c@5 { - #address-cells = <1>; - #size-cells = <0>; - reg = <5>; - }; - - imux54: i2c@6 { - #address-cells = <1>; - #size-cells = <0>; - reg = <6>; - }; - - imux55: i2c@7 { - #address-cells = <1>; - #size-cells = <0>; - reg = <7>; - }; - }; -}; diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-greatlakes.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-greatlakes.dts index 7a53f54833a0..998598c15fd0 100644 --- a/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-greatlakes.dts +++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-greatlakes.dts @@ -66,7 +66,7 @@ pinctrl-0 = <&pinctrl_rmii4_default>; no-hw-checksum; use-ncsi; - mlx,multi-host; + mellanox,multi-host; ncsi-ctrl,start-redo-probe; ncsi-ctrl,no-channel-monitor; ncsi-package = <1>; @@ -211,7 +211,6 @@ }; &adc0 { - ref_voltage = <2500>; status = "okay"; pinctrl-0 = <&pinctrl_adc0_default &pinctrl_adc1_default &pinctrl_adc2_default &pinctrl_adc3_default @@ -220,7 +219,6 @@ }; &adc1 { - ref_voltage = <2500>; status = "okay"; pinctrl-0 = <&pinctrl_adc8_default &pinctrl_adc10_default &pinctrl_adc11_default &pinctrl_adc12_default diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-harma.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-harma.dts new file mode 100644 index 000000000000..c118d473a76f --- /dev/null +++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-harma.dts @@ -0,0 +1,648 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +// Copyright 2023 Facebook Inc. + +/dts-v1/; +#include "aspeed-g6.dtsi" +#include <dt-bindings/gpio/aspeed-gpio.h> +#include <dt-bindings/i2c/i2c.h> + +/ { + model = "Facebook Harma"; + compatible = "facebook,harma-bmc", "aspeed,ast2600"; + + aliases { + serial0 = &uart1; + serial1 = &uart2; + serial2 = &uart4; + serial4 = &uart5; + + i2c20 = &imux20; + i2c21 = &imux21; + i2c22 = &imux22; + i2c23 = &imux23; + i2c24 = &imux24; + i2c25 = &imux25; + i2c26 = &imux26; + i2c27 = &imux27; + i2c28 = &imux28; + i2c29 = &imux29; + i2c30 = &imux30; + i2c31 = &imux31; + + spi1 = &spi_gpio; + }; + + chosen { + stdout-path = &uart5; + }; + + memory@80000000 { + device_type = "memory"; + reg = <0x80000000 0x80000000>; + }; + + iio-hwmon { + compatible = "iio-hwmon"; + io-channels = <&adc0 0>, <&adc0 1>, <&adc0 2>, <&adc0 3>, + <&adc0 4>, <&adc0 5>, <&adc0 6>, <&adc0 7>, + <&adc1 2>; + }; + + leds { + compatible = "gpio-leds"; + + led-0 { + label = "bmc_heartbeat_amber"; + gpios = <&gpio0 ASPEED_GPIO(P, 7) GPIO_ACTIVE_LOW>; + linux,default-trigger = "heartbeat"; + }; + + led-1 { + label = "fp_id_amber"; + default-state = "off"; + gpios = <&gpio0 13 GPIO_ACTIVE_HIGH>; + }; + + led-2 { + label = "power_blue"; + default-state = "off"; + gpios = <&gpio0 124 GPIO_ACTIVE_HIGH>; + }; + }; + + spi_gpio: spi-gpio { + status = "okay"; + compatible = "spi-gpio"; + #address-cells = <1>; + #size-cells = <0>; + + gpio-sck = <&gpio0 ASPEED_GPIO(Z, 3) GPIO_ACTIVE_HIGH>; + gpio-mosi = <&gpio0 ASPEED_GPIO(Z, 4) GPIO_ACTIVE_HIGH>; + gpio-miso = <&gpio0 ASPEED_GPIO(Z, 5) GPIO_ACTIVE_HIGH>; + num-chipselects = <1>; + cs-gpios = <&gpio0 ASPEED_GPIO(Z, 0) GPIO_ACTIVE_LOW>; + + tpmdev@0 { + compatible = "infineon,slb9670", "tcg,tpm_tis-spi"; + spi-max-frequency = <33000000>; + reg = <0>; + }; + }; +}; + +// HOST BIOS Debug +&uart1 { + status = "okay"; +}; + +// SOL Host Console +&uart2 { + status = "okay"; + pinctrl-0 = <>; +}; + +// SOL BMC Console +&uart4 { + status = "okay"; + pinctrl-0 = <>; +}; + +// BMC Debug Console +&uart5 { + status = "okay"; +}; + +// MTIA +&uart6 { + status = "okay"; +}; + +&uart_routing { + status = "okay"; +}; + +&wdt1 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_wdtrst1_default>; + aspeed,reset-type = "soc"; + aspeed,external-signal; + aspeed,ext-push-pull; + aspeed,ext-active-high; + aspeed,ext-pulse-duration = <256>; +}; + +&mac3 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_rmii4_default>; + use-ncsi; + mellanox,multi-host; +}; + +&rtc { + status = "okay"; +}; + +&fmc { + status = "okay"; + + flash@0 { + status = "okay"; + m25p,fast-read; + label = "bmc"; + spi-max-frequency = <50000000>; +#include "openbmc-flash-layout-128.dtsi" + }; + + flash@1 { + status = "okay"; + m25p,fast-read; + label = "alt-bmc"; + spi-max-frequency = <50000000>; + }; +}; + +// BIOS Flash +&spi2 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_spi2_default>; + + flash@0 { + status = "okay"; + m25p,fast-read; + label = "pnor"; + spi-max-frequency = <12000000>; + spi-tx-bus-width = <2>; + spi-rx-bus-width = <2>; + }; +}; + +&kcs2 { + status = "okay"; + aspeed,lpc-io-reg = <0xca8>; +}; + +&kcs3 { + status = "okay"; + aspeed,lpc-io-reg = <0xca2>; +}; + +&i2c0 { + status = "okay"; + + pwm@5e{ + compatible = "max31790"; + reg = <0x5e>; + #address-cells = <1>; + #size-cells = <0>; + }; +}; + +&i2c1 { + status = "okay"; + + temperature-sensor@4b { + compatible = "ti,tmp75"; + reg = <0x4b>; + }; + + // MB NIC FRU + eeprom@50 { + compatible = "atmel,24c64"; + reg = <0x50>; + }; +}; + +&i2c2 { + status = "okay"; + + pwm@5e{ + compatible = "max31790"; + reg = <0x5e>; + #address-cells = <1>; + #size-cells = <0>; + }; +}; + +&i2c3 { + status = "okay"; + + i2c-mux@70 { + compatible = "nxp,pca9543"; + reg = <0x70>; + #address-cells = <1>; + #size-cells = <0>; + + imux20: i2c@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + //Retimer Flash + eeprom@50 { + compatible = "atmel,24c2048"; + reg = <0x50>; + pagesize = <128>; + }; + }; + imux21: i2c@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + retimer@24 { + compatible = "asteralabs,pt5161l"; + reg = <0x24>; + }; + }; + }; +}; + +&i2c4 { + status = "okay"; + // PDB FRU + eeprom@52 { + compatible = "atmel,24c64"; + reg = <0x52>; + }; + + power-monitor@69 { + compatible = "pmbus"; + reg = <0x69>; + }; + + temperature-sensor@49 { + compatible = "ti,tmp75"; + reg = <0x49>; + }; + + power-monitor@22 { + compatible = "lltc,ltc4286"; + reg = <0x22>; + adi,vrange-low-enable; + shunt-resistor-micro-ohms = <500>; + }; +}; + +&i2c5 { + status = "okay"; +}; + +&i2c6 { + status = "okay"; + + i2c-mux@70 { + compatible = "nxp,pca9543"; + reg = <0x70>; + #address-cells = <1>; + #size-cells = <0>; + + imux22: i2c@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + }; + imux23: i2c@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + }; + }; +}; + +&i2c7 { + status = "okay"; +}; + +&i2c8 { + status = "okay"; +}; + +&i2c9 { + status = "okay"; + + gpio@30 { + compatible = "nxp,pca9555"; + reg = <0x30>; + gpio-controller; + #gpio-cells = <2>; + }; + gpio@31 { + compatible = "nxp,pca9555"; + reg = <0x31>; + gpio-controller; + #gpio-cells = <2>; + + gpio-line-names = + "","","","", + "","","presence-cmm","", + "","","","", + "","","",""; + }; + + i2c-mux@71 { + compatible = "nxp,pca9546"; + reg = <0x71>; + #address-cells = <1>; + #size-cells = <0>; + + imux24: i2c@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + }; + imux25: i2c@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + }; + imux26: i2c@2 { + #address-cells = <1>; + #size-cells = <0>; + reg = <2>; + }; + imux27: i2c@3 { + #address-cells = <1>; + #size-cells = <0>; + reg = <3>; + }; + }; + // PTTV FRU + eeprom@52 { + compatible = "atmel,24c64"; + reg = <0x52>; + }; +}; + +&i2c11 { + status = "okay"; +}; + +&i2c12 { + status = "okay"; + retimer@24 { + compatible = "asteralabs,pt5161l"; + reg = <0x24>; + }; +}; + +&i2c13 { + status = "okay"; + + i2c-mux@70 { + compatible = "nxp,pca9545"; + reg = <0x70>; + #address-cells = <1>; + #size-cells = <0>; + + imux28: i2c@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + }; + imux29: i2c@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + //MB FRU + eeprom@54 { + compatible = "atmel,24c64"; + reg = <0x54>; + }; + }; + imux30: i2c@2 { + #address-cells = <1>; + #size-cells = <0>; + reg = <2>; + }; + imux31: i2c@3 { + #address-cells = <1>; + #size-cells = <0>; + reg = <3>; + }; + }; +}; + +// To Debug card +&i2c14 { + status = "okay"; + multi-master; + + ipmb@10 { + compatible = "ipmb-dev"; + reg = <(0x10 | I2C_OWN_SLAVE_ADDRESS)>; + i2c-protocol; + }; +}; + +&i2c15 { + status = "okay"; + + // SCM FRU + eeprom@50 { + compatible = "atmel,24c64"; + reg = <0x50>; + }; + + // BSM FRU + eeprom@56 { + compatible = "atmel,24c64"; + reg = <0x56>; + }; +}; + +&adc0 { + aspeed,int-vref-microvolt = <2500000>; + status = "okay"; + pinctrl-0 = <&pinctrl_adc0_default &pinctrl_adc1_default + &pinctrl_adc2_default &pinctrl_adc3_default + &pinctrl_adc4_default &pinctrl_adc5_default + &pinctrl_adc6_default &pinctrl_adc7_default>; +}; + +&adc1 { + aspeed,int-vref-microvolt = <2500000>; + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_adc10_default>; +}; + +&ehci0 { + status = "okay"; +}; + +&gpio0 { + pinctrl-names = "default"; + gpio-line-names = + /*A0-A7*/ "","","","","","","","", + /*B0-B7*/ "","","","", + "bmc-spi-mux-select-0","led-identify","","", + /*C0-C7*/ "reset-cause-platrst","","","","", + "cpu0-err-alert","","", + /*D0-D7*/ "","","sol-uart-select","","","","","", + /*E0-E7*/ "","","","","","","","", + /*F0-F7*/ "","","","","","","","", + /*G0-G7*/ "","","","","","","","", + /*H0-H7*/ "","","","","","","","", + /*I0-I7*/ "","","","","","","","", + /*J0-J7*/ "","","","","","","","", + /*K0-K7*/ "","","","","","","","", + /*L0-L7*/ "","","","", + "leakage-detect-alert","","","", + /*M0-M7*/ "","","","","","","","", + /*N0-N7*/ "led-postcode-0","led-postcode-1", + "led-postcode-2","led-postcode-3", + "led-postcode-4","led-postcode-5", + "led-postcode-6","led-postcode-7", + /*O0-O7*/ "","","","","","","","", + /*P0-P7*/ "power-button","power-host-control", + "reset-button","","led-power","","","", + /*Q0-Q7*/ "","","","","","","","", + /*R0-R7*/ "","","","","","","","", + /*S0-S7*/ "","","","","","","","", + /*T0-T7*/ "","","","","","","","", + /*U0-U7*/ "","","","","","","led-identify-gate","", + /*V0-V7*/ "","","","", + "rtc-battery-voltage-read-enable","","","", + /*W0-W7*/ "","","","","","","","", + /*X0-X7*/ "","","","","","","","", + /*Y0-Y7*/ "","","","","","","","", + /*Z0-Z7*/ "","","","","","","presence-post-card",""; +}; + +&gpio1 { + gpio-line-names = + /*18A0-18A7*/ "ac-power-button","","","","","","","", + /*18B0-18B7*/ "","","","","","","","", + /*18C0-18C7*/ "","","","","","","","", + /*18D0-18D7*/ "","","","","","","","", + /*18E0-18E3*/ "","","","","","","",""; +}; + +&sgpiom0 { + status = "okay"; + max-ngpios = <128>; + ngpios = <128>; + bus-frequency = <2000000>; + gpio-line-names = + /*in - out - in - out */ + /*A0-A3 line 0-7*/ + "presence-scm-cable","power-config-disable-e1s-0", + "","", + "","power-config-disable-e1s-1", + "","", + /*A4-A7 line 8-15*/ + "","power-config-asic-module-enable", + "","power-config-asic-power-good", + "","power-config-pdb-power-good", + "presence-cpu","smi-control-n", + /*B0-B3 line 16-23*/ + "","nmi-control-n", + "","nmi-control-sync-flood-n", + "","", + "","", + /*B4-B7 line 24-31*/ + "","FM_CPU_SP5R1", + "reset-cause-rsmrst","FM_CPU_SP5R2", + "","FM_CPU_SP5R3", + "","FM_CPU_SP5R4", + /*C0-C3 line 32-39*/ + "","FM_CPU0_SA0", + "","FM_CPU0_SA1", + "","rt-cpu0-p0-enable", + "","rt-cpu0-p1-enable", + /*C4-C7 line 40-47*/ + "","smb-rt-rom-p0-select", + "","smb-rt-rom-p1-select", + "","i3c-cpu-mux0-oe-n", + "","i3c-cpu-mux0-select", + /*D0-D3 line 48-55*/ + "","i3c-cpu-mux1-oe-n", + "","i3c-cpu-mux1-select", + "","reset-control-bmc", + "","reset-control-cpu0-p0-mux", + /*D4-D7 line 56-63*/ + "","reset-control-cpu0-p1-mux", + "","reset-control-e1s-mux", + "power-host-good","reset-control-mb-mux", + "host0-ready","reset-control-smb-e1s-0", + /*E0-E3 line 64-71*/ + "","reset-control-smb-e1s-1", + "post-end-n","reset-control-srst", + "presence-e1s-0","reset-control-usb-hub", + "","reset-control", + /*E4-E7 line 72-79*/ + "presence-e1s-1","reset-control-cpu-kbrst", + "","reset-control-platrst", + "","bmc-jtag-mux-select-0", + "","bmc-jtag-mux-select-1", + /*F0-F3 line 80-87*/ + "","bmc-jtag-select", + "","bmc-ready-n", + "","bmc-ready-sgpio", + "","rt-cpu0-p0-force-enable", + /*F4-F7 line 88-95*/ + "presence-asic-modules-0","rt-cpu0-p1-force-enable", + "presence-asic-modules-1","bios-debug-msg-disable", + "","uart-control-buffer-select", + "","ac-control-n", + /*G0-G3 line 96-103*/ + "FM_CPU_CORETYPE2","", + "FM_CPU_CORETYPE1","", + "FM_CPU_CORETYPE0","", + "FM_BOARD_REV_ID5","", + /*G4-G7 line 104-111*/ + "FM_BOARD_REV_ID4","", + "FM_BOARD_REV_ID3","", + "FM_BOARD_REV_ID2","", + "FM_BOARD_REV_ID1","", + /*H0-H3 line 112-119*/ + "FM_BOARD_REV_ID0","", + "","","","","","", + /*H4-H7 line 120-127*/ + "","", + "reset-control-pcie-expansion-3","", + "reset-control-pcie-expansion-2","", + "reset-control-pcie-expansion-1","", + /*I0-I3 line 128-135*/ + "reset-control-pcie-expansion-0","", + "FM_EXP_SLOT_ID1","", + "FM_EXP_SLOT_ID0","", + "","", + /*I4-I7 line 136-143*/ + "","","","","","","","", + /*J0-J3 line 144-151*/ + "","","","","","","","", + /*J4-J7 line 152-159*/ + "SLOT_ID_BCB_0","", + "SLOT_ID_BCB_1","", + "SLOT_ID_BCB_2","", + "SLOT_ID_BCB_3","", + /*K0-K3 line 160-167*/ + "","","","","","","P0_I3C_APML_ALERT_L","", + /*K4-K7 line 168-175*/ + "","","","","","","irq-uv-detect-alert","", + /*L0-L3 line 176-183*/ + "irq-hsc-alert","", + "cpu0-prochot-alert","", + "cpu0-thermtrip-alert","", + "reset-cause-pcie","", + /*L4-L7 line 184-191*/ + "pvdd11-ocp-alert","","","","","","","", + /*M0-M3 line 192-199*/ + "","","","","","","","", + /*M4-M7 line 200-207*/ + "","","","","","","","", + /*N0-N3 line 208-215*/ + "","","","","","","","", + /*N4-N7 line 216-223*/ + "","","","","","","","", + /*O0-O3 line 224-231*/ + "","","","","","","","", + /*O4-O7 line 232-239*/ + "","","","","","","","", + /*P0-P3 line 240-247*/ + "","","","","","","","", + /*P4-P7 line 248-255*/ + "","","","","","","",""; +}; diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-minerva-cmc.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-minerva-cmc.dts deleted file mode 100644 index f04ef9063520..000000000000 --- a/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-minerva-cmc.dts +++ /dev/null @@ -1,265 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0+ -// Copyright (c) 2023 Facebook Inc. -/dts-v1/; - -#include "aspeed-g6.dtsi" -#include <dt-bindings/gpio/aspeed-gpio.h> -#include <dt-bindings/i2c/i2c.h> - -/ { - model = "Facebook Minerva CMC"; - compatible = "facebook,minerva-cmc", "aspeed,ast2600"; - - aliases { - serial5 = &uart5; - }; - - chosen { - stdout-path = "serial5:57600n8"; - }; - - memory@80000000 { - device_type = "memory"; - reg = <0x80000000 0x80000000>; - }; - - iio-hwmon { - compatible = "iio-hwmon"; - io-channels = <&adc0 0>, <&adc0 1>, <&adc0 2>, <&adc0 3>, - <&adc0 4>, <&adc0 5>, <&adc0 6>, <&adc0 7>, - <&adc1 2>; - }; -}; - -&uart6 { - status = "okay"; -}; - -&wdt1 { - status = "okay"; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_wdtrst1_default>; - aspeed,reset-type = "soc"; - aspeed,external-signal; - aspeed,ext-push-pull; - aspeed,ext-active-high; - aspeed,ext-pulse-duration = <256>; -}; - -&mac3 { - status = "okay"; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_rmii4_default>; - use-ncsi; - mlx,multi-host; -}; - -&fmc { - status = "okay"; - flash@0 { - status = "okay"; - m25p,fast-read; - label = "bmc"; - spi-max-frequency = <50000000>; -#include "openbmc-flash-layout-128.dtsi" - }; - flash@1 { - status = "okay"; - m25p,fast-read; - label = "alt-bmc"; - spi-max-frequency = <50000000>; - }; -}; - -&rtc { - status = "okay"; -}; - -&sgpiom1 { - status = "okay"; - ngpios = <128>; - bus-frequency = <2000000>; -}; - -&i2c0 { - status = "okay"; -}; - -&i2c1 { - status = "okay"; - - temperature-sensor@4b { - compatible = "ti,tmp75"; - reg = <0x4B>; - }; - - eeprom@51 { - compatible = "atmel,24c128"; - reg = <0x51>; - }; -}; - -&i2c2 { - status = "okay"; - - i2c-mux@77 { - compatible = "nxp,pca9548"; - reg = <0x77>; - #address-cells = <1>; - #size-cells = <0>; - i2c-mux-idle-disconnect; - - i2c@0 { - #address-cells = <1>; - #size-cells = <0>; - reg = <0>; - - eeprom@50 { - compatible = "atmel,24c128"; - reg = <0x50>; - }; - }; - - i2c@1 { - #address-cells = <1>; - #size-cells = <0>; - reg = <1>; - - eeprom@50 { - compatible = "atmel,24c128"; - reg = <0x50>; - }; - }; - - i2c@2 { - #address-cells = <1>; - #size-cells = <0>; - reg = <2>; - - eeprom@50 { - compatible = "atmel,24c128"; - reg = <0x50>; - }; - }; - - i2c@3 { - #address-cells = <1>; - #size-cells = <0>; - reg = <3>; - - eeprom@50 { - compatible = "atmel,24c128"; - reg = <0x50>; - }; - }; - - i2c@4 { - #address-cells = <1>; - #size-cells = <0>; - reg = <4>; - - eeprom@50 { - compatible = "atmel,24c128"; - reg = <0x50>; - }; - }; - - i2c@5 { - #address-cells = <1>; - #size-cells = <0>; - reg = <5>; - - eeprom@50 { - compatible = "atmel,24c128"; - reg = <0x50>; - }; - }; - }; -}; - -&i2c3 { - status = "okay"; -}; - -&i2c4 { - status = "okay"; -}; - -&i2c5 { - status = "okay"; -}; - -&i2c6 { - status = "okay"; -}; - -&i2c7 { - status = "okay"; -}; - -&i2c8 { - status = "okay"; -}; - -&i2c9 { - status = "okay"; -}; - -&i2c10 { - status = "okay"; -}; - -&i2c11 { - status = "okay"; -}; - -&i2c12 { - status = "okay"; -}; - -&i2c13 { - status = "okay"; -}; - -&i2c14 { - status = "okay"; - multi-master; - - ipmb@10 { - compatible = "ipmb-dev"; - reg = <(0x10 | I2C_OWN_SLAVE_ADDRESS)>; - i2c-protocol; - }; -}; - -&i2c15 { - status = "okay"; - - eeprom@50 { - compatible = "atmel,24c128"; - reg = <0x50>; - }; -}; - -&adc0 { - aspeed,int-vref-microvolt = <2500000>; - status = "okay"; - pinctrl-0 = <&pinctrl_adc0_default &pinctrl_adc1_default - &pinctrl_adc2_default &pinctrl_adc3_default - &pinctrl_adc4_default &pinctrl_adc5_default - &pinctrl_adc6_default &pinctrl_adc7_default>; -}; - -&adc1 { - aspeed,int-vref-microvolt = <2500000>; - status = "okay"; - pinctrl-0 = <&pinctrl_adc10_default>; -}; - -&ehci1 { - status = "okay"; -}; - -&uhci { - status = "okay"; -}; diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-minerva.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-minerva.dts new file mode 100644 index 000000000000..942e53d5c714 --- /dev/null +++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-minerva.dts @@ -0,0 +1,543 @@ +// SPDX-License-Identifier: GPL-2.0+ +// Copyright (c) 2023 Facebook Inc. +/dts-v1/; + +#include "aspeed-g6.dtsi" +#include <dt-bindings/gpio/aspeed-gpio.h> +#include <dt-bindings/i2c/i2c.h> + +/ { + model = "Facebook Minerva CMM"; + compatible = "facebook,minerva-cmc", "aspeed,ast2600"; + + aliases { + serial5 = &uart5; + /* + * PCA9548 (2-0077) provides 8 channels connecting to + * 6 pcs of FCB (Fan Controller Board). + */ + i2c16 = &imux16; + i2c17 = &imux17; + i2c18 = &imux18; + i2c19 = &imux19; + i2c20 = &imux20; + i2c21 = &imux21; + }; + + chosen { + stdout-path = "serial5:57600n8"; + }; + + memory@80000000 { + device_type = "memory"; + reg = <0x80000000 0x80000000>; + }; + + iio-hwmon { + compatible = "iio-hwmon"; + io-channels = <&adc0 0>, <&adc0 1>, <&adc0 2>, <&adc0 3>, + <&adc0 4>, <&adc0 5>, <&adc0 6>, <&adc0 7>, + <&adc1 2>; + }; + + leds { + compatible = "gpio-leds"; + + led-fan-fault { + label = "led-fan-fault"; + gpios = <&leds_gpio 9 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + }; +}; + +&uart6 { + status = "okay"; +}; + +&wdt1 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_wdtrst1_default>; + aspeed,reset-type = "soc"; + aspeed,external-signal; + aspeed,ext-push-pull; + aspeed,ext-active-high; + aspeed,ext-pulse-duration = <256>; +}; + +&mac3 { + status = "okay"; + phy-mode = "rmii"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_rmii4_default>; + fixed-link { + speed = <100>; + full-duplex; + }; +}; + +&fmc { + status = "okay"; + flash@0 { + status = "okay"; + m25p,fast-read; + label = "bmc"; + spi-max-frequency = <50000000>; +#include "openbmc-flash-layout-128.dtsi" + }; + flash@1 { + status = "okay"; + m25p,fast-read; + label = "alt-bmc"; + spi-max-frequency = <50000000>; + }; +}; + +&rtc { + status = "okay"; +}; + +&sgpiom0 { + status = "okay"; + ngpios = <128>; + bus-frequency = <2000000>; +}; + +&i2c0 { + status = "okay"; + + power-monitor@40 { + compatible = "ti,ina230"; + reg = <0x40>; + shunt-resistor = <1000>; + }; + + power-monitor@41 { + compatible = "ti,ina230"; + reg = <0x41>; + shunt-resistor = <1000>; + }; + + power-monitor@67 { + compatible = "adi,ltc2945"; + reg = <0x67>; + }; + + power-monitor@68 { + compatible = "adi,ltc2945"; + reg = <0x68>; + }; + + leds_gpio: gpio@19 { + compatible = "nxp,pca9555"; + reg = <0x19>; + gpio-controller; + #gpio-cells = <2>; + }; +}; + +&i2c1 { + status = "okay"; + + temperature-sensor@4b { + compatible = "ti,tmp75"; + reg = <0x4b>; + }; + + temperature-sensor@48 { + compatible = "ti,tmp75"; + reg = <0x48>; + }; + + eeprom@54 { + compatible = "atmel,24c128"; + reg = <0x54>; + }; +}; + +&i2c2 { + status = "okay"; + + i2c-mux@77 { + compatible = "nxp,pca9548"; + reg = <0x77>; + #address-cells = <1>; + #size-cells = <0>; + i2c-mux-idle-disconnect; + + imux16: i2c@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + + eeprom@50 { + compatible = "atmel,24c128"; + reg = <0x50>; + }; + + pwm@5e{ + compatible = "max31790"; + reg = <0x5e>; + #address-cells = <1>; + #size-cells = <0>; + }; + }; + + imux17: i2c@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + + eeprom@50 { + compatible = "atmel,24c128"; + reg = <0x50>; + }; + + pwm@5e{ + compatible = "max31790"; + reg = <0x5e>; + #address-cells = <1>; + #size-cells = <0>; + }; + }; + + imux18: i2c@2 { + #address-cells = <1>; + #size-cells = <0>; + reg = <2>; + + eeprom@50 { + compatible = "atmel,24c128"; + reg = <0x50>; + }; + + pwm@5e{ + compatible = "max31790"; + reg = <0x5e>; + #address-cells = <1>; + #size-cells = <0>; + }; + }; + + imux19: i2c@3 { + #address-cells = <1>; + #size-cells = <0>; + reg = <3>; + + eeprom@50 { + compatible = "atmel,24c128"; + reg = <0x50>; + }; + + pwm@5e{ + compatible = "max31790"; + reg = <0x5e>; + #address-cells = <1>; + #size-cells = <0>; + }; + }; + + imux20: i2c@4 { + #address-cells = <1>; + #size-cells = <0>; + reg = <4>; + + eeprom@50 { + compatible = "atmel,24c128"; + reg = <0x50>; + }; + + pwm@5e{ + compatible = "max31790"; + reg = <0x5e>; + #address-cells = <1>; + #size-cells = <0>; + }; + }; + + imux21: i2c@5 { + #address-cells = <1>; + #size-cells = <0>; + reg = <5>; + + eeprom@50 { + compatible = "atmel,24c128"; + reg = <0x50>; + }; + + pwm@5e{ + compatible = "max31790"; + reg = <0x5e>; + #address-cells = <1>; + #size-cells = <0>; + }; + }; + }; +}; + +&i2c3 { + status = "okay"; +}; + +&i2c4 { + status = "okay"; +}; + +&i2c5 { + status = "okay"; +}; + +&i2c6 { + status = "okay"; +}; + +&i2c7 { + status = "okay"; +}; + +&i2c8 { + status = "okay"; +}; + +&i2c9 { + status = "okay"; +}; + +&i2c10 { + status = "okay"; +}; + +&i2c11 { + status = "okay"; +}; + +&i2c12 { + status = "okay"; +}; + +&i2c13 { + status = "okay"; +}; + +&i2c14 { + status = "okay"; + multi-master; + + ipmb@10 { + compatible = "ipmb-dev"; + reg = <(0x10 | I2C_OWN_SLAVE_ADDRESS)>; + i2c-protocol; + }; +}; + +&i2c15 { + status = "okay"; + + eeprom@50 { + compatible = "atmel,24c128"; + reg = <0x50>; + }; +}; + +&adc0 { + aspeed,int-vref-microvolt = <2500000>; + status = "okay"; + pinctrl-0 = <&pinctrl_adc0_default &pinctrl_adc1_default + &pinctrl_adc2_default &pinctrl_adc3_default + &pinctrl_adc4_default &pinctrl_adc5_default + &pinctrl_adc6_default &pinctrl_adc7_default>; +}; + +&adc1 { + aspeed,int-vref-microvolt = <2500000>; + status = "okay"; + pinctrl-0 = <&pinctrl_adc10_default>; +}; + +&ehci1 { + status = "okay"; +}; + +&uhci { + status = "okay"; +}; + +&gpio0 { + gpio-line-names = + /*A0-A7*/ "","","","","","","","", + /*B0-B7*/ "","","","","","","","", + /*C0-C7*/ "","","","","BLADE_UART_SEL2","","","", + /*D0-D7*/ "","","","","","","","", + /*E0-E7*/ "","","","","","","","", + /*F0-F7*/ "","","","","","","","", + /*G0-G7*/ "","","","","","","","", + /*H0-H7*/ "","","","","","","","", + /*I0-I7*/ "","","","","","","","", + /*J0-J7*/ "","","","","","","","", + /*K0-K7*/ "","","","","","","","", + /*L0-L7*/ "","","","","BLADE_UART_SEL0","","","", + /*M0-M7*/ "","","","","","BLADE_UART_SEL1","","", + /*N0-N7*/ "","","","","","","","", + /*O0-O7*/ "","","","","","","","", + /*P0-P7*/ "","","","","","","","", + /*Q0-Q7*/ "","","","","","","","", + /*R0-R7*/ "","","","","","","","", + /*S0-S7*/ "","","","","","","","", + /*T0-T7*/ "","","","","","","","", + /*U0-U7*/ "","","","","","","","", + /*V0-V7*/ "","","","","BAT_DETECT","","","", + /*W0-W7*/ "","","","","","","","", + /*X0-X7*/ "","","BLADE_UART_SEL3","","","","","", + /*Y0-Y7*/ "","","","","","","","", + /*Z0-Z7*/ "","","","","","","",""; +}; + +&sgpiom0 { + gpio-line-names = + /*"input pin","output pin"*/ + /*A0 - A7*/ + "PRSNT_MTIA_BLADE0_N","PWREN_MTIA_BLADE0_EN", + "PRSNT_MTIA_BLADE1_N","PWREN_MTIA_BLADE1_EN", + "PRSNT_MTIA_BLADE2_N","PWREN_MTIA_BLADE2_EN", + "PRSNT_MTIA_BLADE3_N","PWREN_MTIA_BLADE3_EN", + "PRSNT_MTIA_BLADE4_N","PWREN_MTIA_BLADE4_EN", + "PRSNT_MTIA_BLADE5_N","PWREN_MTIA_BLADE5_EN", + "PRSNT_MTIA_BLADE6_N","PWREN_MTIA_BLADE6_EN", + "PRSNT_MTIA_BLADE7_N","PWREN_MTIA_BLADE7_EN", + /*B0 - B7*/ + "PRSNT_MTIA_BLADE8_N","PWREN_MTIA_BLADE8_EN", + "PRSNT_MTIA_BLADE9_N","PWREN_MTIA_BLADE9_EN", + "PRSNT_MTIA_BLADE10_N","PWREN_MTIA_BLADE10_EN", + "PRSNT_MTIA_BLADE11_N","PWREN_MTIA_BLADE11_EN", + "PRSNT_MTIA_BLADE12_N","PWREN_MTIA_BLADE12_EN", + "PRSNT_MTIA_BLADE13_N","PWREN_MTIA_BLADE13_EN", + "PRSNT_MTIA_BLADE14_N","PWREN_MTIA_BLADE14_EN", + "PRSNT_MTIA_BLADE15_N","PWREN_MTIA_BLADE15_EN", + /*C0 - C7*/ + "PRSNT_NW_BLADE0_N","PWREN_NW_BLADE0_EN", + "PRSNT_NW_BLADE1_N","PWREN_NW_BLADE1_EN", + "PRSNT_NW_BLADE2_N","PWREN_NW_BLADE2_EN", + "PRSNT_NW_BLADE3_N","PWREN_NW_BLADE3_EN", + "PRSNT_NW_BLADE4_N","PWREN_NW_BLADE4_EN", + "PRSNT_NW_BLADE5_N","PWREN_NW_BLADE5_EN", + "PRSNT_FCB_TOP_0_N","PWREN_MTIA_BLADE0_HSC_EN", + "PRSNT_FCB_TOP_1_N","PWREN_MTIA_BLADE1_HSC_EN", + /*D0 - D7*/ + "PRSNT_FCB_MIDDLE_0_N","PWREN_MTIA_BLADE2_HSC_EN", + "PRSNT_FCB_MIDDLE_1_N","PWREN_MTIA_BLADE3_HSC_EN", + "PRSNT_FCB_BOTTOM_0_N","PWREN_MTIA_BLADE4_HSC_EN", + "PRSNT_FCB_BOTTOM_1_N","PWREN_MTIA_BLADE5_HSC_EN", + "PWRGD_MTIA_BLADE0_PWROK_L_BUF","PWREN_MTIA_BLADE6_HSC_EN", + "PWRGD_MTIA_BLADE1_PWROK_L_BUF","PWREN_MTIA_BLADE7_HSC_EN", + "PWRGD_MTIA_BLADE2_PWROK_L_BUF","PWREN_MTIA_BLADE8_HSC_EN", + "PWRGD_MTIA_BLADE3_PWROK_L_BUF","PWREN_MTIA_BLADE9_HSC_EN", + /*E0 - E7*/ + "PWRGD_MTIA_BLADE4_PWROK_L_BUF","PWREN_MTIA_BLADE10_HSC_EN", + "PWRGD_MTIA_BLADE5_PWROK_L_BUF","PWREN_MTIA_BLADE11_HSC_EN", + "PWRGD_MTIA_BLADE6_PWROK_L_BUF","PWREN_MTIA_BLADE12_HSC_EN", + "PWRGD_MTIA_BLADE7_PWROK_L_BUF","PWREN_MTIA_BLADE13_HSC_EN", + "PWRGD_MTIA_BLADE8_PWROK_L_BUF","PWREN_MTIA_BLADE14_HSC_EN", + "PWRGD_MTIA_BLADE9_PWROK_L_BUF","PWREN_MTIA_BLADE15_HSC_EN", + "PWRGD_MTIA_BLADE10_PWROK_L_BUF","PWREN_NW_BLADE0_HSC_EN", + "PWRGD_MTIA_BLADE11_PWROK_L_BUF","PWREN_NW_BLADE1_HSC_EN", + /*F0 - F7*/ + "PWRGD_MTIA_BLADE12_PWROK_L_BUF","PWREN_NW_BLADE2_HSC_EN", + "PWRGD_MTIA_BLADE13_PWROK_L_BUF","PWREN_NW_BLADE3_HSC_EN", + "PWRGD_MTIA_BLADE14_PWROK_L_BUF","PWREN_NW_BLADE4_HSC_EN", + "PWRGD_MTIA_BLADE15_PWROK_L_BUF","PWREN_NW_BLADE5_HSC_EN", + "PWRGD_NW_BLADE0_PWROK_L_BUF","PWREN_FCB_TOP_L_EN", + "PWRGD_NW_BLADE1_PWROK_L_BUF","PWREN_FCB_TOP_R_EN", + "PWRGD_NW_BLADE2_PWROK_L_BUF","PWREN_FCB_MIDDLE_L_EN", + "PWRGD_NW_BLADE3_PWROK_L_BUF","PWREN_FCB_MIDDLE_R_EN", + /*G0 - G7*/ + "PWRGD_NW_BLADE4_PWROK_L_BUF","PWREN_FCB_BOTTOM_L_EN", + "PWRGD_NW_BLADE5_PWROK_L_BUF","PWREN_FCB_BOTTOM_R_EN", + "PWRGD_FCB_TOP_0_PWROK_L_BUF","FM_CMM_AC_CYCLE_N", + "PWRGD_FCB_TOP_1_PWROK_L_BUF","MGMT_SFP_TX_DIS", + "PWRGD_FCB_MIDDLE_0_PWROK_L_BUF","", + "PWRGD_FCB_MIDDLE_1_PWROK_L_BUF","RST_I2CRST_MTIA_BLADE0_1_N", + "PWRGD_FCB_BOTTOM_0_PWROK_L_BUF","RST_I2CRST_MTIA_BLADE2_3_N", + "PWRGD_FCB_BOTTOM_1_PWROK_L_BUF","RST_I2CRST_MTIA_BLADE4_5_N", + /*H0 - H7*/ + "LEAK_DETECT_MTIA_BLADE0_N_BUF","RST_I2CRST_MTIA_BLADE6_7_N", + "LEAK_DETECT_MTIA_BLADE1_N_BUF","RST_I2CRST_MTIA_BLADE8_9_N", + "LEAK_DETECT_MTIA_BLADE2_N_BUF","RST_I2CRST_MTIA_BLADE10_11_N", + "LEAK_DETECT_MTIA_BLADE3_N_BUF","RST_I2CRST_MTIA_BLADE12_13_N", + "LEAK_DETECT_MTIA_BLADE4_N_BUF","RST_I2CRST_MTIA_BLADE14_15_N", + "LEAK_DETECT_MTIA_BLADE5_N_BUF","RST_I2CRST_NW_BLADE0_1_2_N", + "LEAK_DETECT_MTIA_BLADE6_N_BUF","RST_I2CRST_NW_BLADE3_4_5_N", + "LEAK_DETECT_MTIA_BLADE7_N_BUF","RST_I2CRST_FCB_N", + /*I0 - I7*/ + "LEAK_DETECT_MTIA_BLADE8_N_BUF","RST_I2CRST_FCB_B_L_N", + "LEAK_DETECT_MTIA_BLADE9_N_BUF","RST_I2CRST_FCB_B_R_N", + "LEAK_DETECT_MTIA_BLADE10_N_BUF","RST_I2CRST_FCB_M_L_N", + "LEAK_DETECT_MTIA_BLADE11_N_BUF","RST_I2CRST_FCB_M_R_N", + "LEAK_DETECT_MTIA_BLADE12_N_BUF","RST_I2CRST_FCB_T_L_N", + "LEAK_DETECT_MTIA_BLADE13_N_BUF","RST_I2CRST_FCB_T_R_N", + "LEAK_DETECT_MTIA_BLADE14_N_BUF","BMC_READY", + "LEAK_DETECT_MTIA_BLADE15_N_BUF","wFM_88E6393X_BIN_UPDATE_EN_N", + /*J0 - J7*/ + "LEAK_DETECT_NW_BLADE0_N_BUF","WATER_VALVE_CLOSED_N", + "LEAK_DETECT_NW_BLADE1_N_BUF","", + "LEAK_DETECT_NW_BLADE2_N_BUF","", + "LEAK_DETECT_NW_BLADE3_N_BUF","", + "LEAK_DETECT_NW_BLADE4_N_BUF","", + "LEAK_DETECT_NW_BLADE5_N_BUF","", + "MTIA_BLADE0_STATUS_LED","", + "MTIA_BLADE1_STATUS_LED","", + /*K0 - K7*/ + "MTIA_BLADE2_STATUS_LED","", + "MTIA_BLADE3_STATUS_LED","", + "MTIA_BLADE4_STATUS_LED","", + "MTIA_BLADE5_STATUS_LED","", + "MTIA_BLADE6_STATUS_LED","", + "MTIA_BLADE7_STATUS_LED","", + "MTIA_BLADE8_STATUS_LED","", + "MTIA_BLADE9_STATUS_LED","", + /*L0 - L7*/ + "MTIA_BLADE10_STATUS_LED","", + "MTIA_BLADE11_STATUS_LED","", + "MTIA_BLADE12_STATUS_LED","", + "MTIA_BLADE13_STATUS_LED","", + "MTIA_BLADE14_STATUS_LED","", + "MTIA_BLADE15_STATUS_LED","", + "NW_BLADE0_STATUS_LED","", + "NW_BLADE1_STATUS_LED","", + /*M0 - M7*/ + "NW_BLADE2_STATUS_LED","", + "NW_BLADE3_STATUS_LED","", + "NW_BLADE4_STATUS_LED","", + "NW_BLADE5_STATUS_LED","", + "RPU_READY","", + "IT_GEAR_RPU_LINK_N","", + "IT_GEAR_LEAK","", + "WATER_VALVE_CLOSED_N","", + /*N0 - N7*/ + "VALVE_STS0","", + "VALVE_STS1","", + "VALVE_STS2","", + "VALVE_STS3","", + "CR_TOGGLE_BOOT_BUF_N","", + "CMM_LC_RDY_LED_N","", + "CMM_LC_UNRDY_LED_N","", + "CMM_CABLE_CARTRIDGE_PRSNT_BOT_N","", + /*O0 - O7*/ + "CMM_CABLE_CARTRIDGE_PRSNT_TOP_N","", + "BOT_BCB_CABLE_PRSNT_N","", + "TOP_BCB_CABLE_PRSNT_N","", + "CHASSIS0_LEAK_Q_N","", + "CHASSIS1_LEAK_Q_N","", + "LEAK0_DETECT","", + "LEAK1_DETECT","", + "MGMT_SFP_PRSNT_N","", + /*P0 - P7*/ + "MGMT_SFP_TX_FAULT","", + "MGMT_SFP_RX_LOS","", + "","", + "","", + "","", + "","", + "","", + "",""; +}; diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-yosemite4.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-yosemite4.dts index 64075cc41d92..98477792aa00 100644 --- a/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-yosemite4.dts +++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-yosemite4.dts @@ -88,7 +88,7 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_rmii3_default>; use-ncsi; - mlx,multi-host; + mellanox,multi-host; }; &mac3 { @@ -96,7 +96,7 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_rmii4_default>; use-ncsi; - mlx,multi-host; + mellanox,multi-host; }; &fmc { @@ -369,7 +369,14 @@ &i2c13 { status = "okay"; - bus-frequency = <400000>; + bus-frequency = <100000>; + multi-master; + + ipmb@10 { + compatible = "ipmb-dev"; + reg = <(0x10 | I2C_OWN_SLAVE_ADDRESS)>; + i2c-protocol; + }; }; &i2c14 { @@ -596,7 +603,6 @@ }; &adc0 { - ref_voltage = <2500>; status = "okay"; pinctrl-0 = <&pinctrl_adc0_default &pinctrl_adc1_default &pinctrl_adc2_default &pinctrl_adc3_default @@ -605,7 +611,6 @@ }; &adc1 { - ref_voltage = <2500>; status = "okay"; pinctrl-0 = <&pinctrl_adc8_default &pinctrl_adc9_default>; }; diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-yosemitev2.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-yosemitev2.dts index 6bf2ff85a40e..5143f85fbd70 100644 --- a/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-yosemitev2.dts +++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-yosemitev2.dts @@ -95,7 +95,7 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_rmii1_default>; use-ncsi; - mlx,multi-host; + mellanox,multi-host; }; &adc { diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-bonnell.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-bonnell.dts index cad1b9aac97b..6fdda42575df 100644 --- a/arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-bonnell.dts +++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-bonnell.dts @@ -488,7 +488,7 @@ #gpio-cells = <2>; led@0 { - label = "nvme0"; + label = "nvme3"; reg = <0>; retain-state-shutdown; default-state = "keep"; @@ -496,7 +496,7 @@ }; led@1 { - label = "nvme1"; + label = "nvme2"; reg = <1>; retain-state-shutdown; default-state = "keep"; @@ -504,7 +504,7 @@ }; led@2 { - label = "nvme2"; + label = "nvme1"; reg = <2>; retain-state-shutdown; default-state = "keep"; @@ -512,7 +512,7 @@ }; led@3 { - label = "nvme3"; + label = "nvme0"; reg = <3>; retain-state-shutdown; default-state = "keep"; diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-system1.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-system1.dts new file mode 100644 index 000000000000..dcbc16308ab5 --- /dev/null +++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-system1.dts @@ -0,0 +1,1623 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +// Copyright 2023 IBM Corp. +/dts-v1/; + +#include "aspeed-g6.dtsi" +#include <dt-bindings/gpio/aspeed-gpio.h> +#include <dt-bindings/i2c/i2c.h> +#include <dt-bindings/leds/leds-pca955x.h> + +/ { + model = "System1"; + compatible = "ibm,system1-bmc", "aspeed,ast2600"; + + aliases { + i2c16 = &i2c8mux1chn0; + i2c17 = &i2c8mux1chn1; + i2c18 = &i2c8mux1chn2; + i2c19 = &i2c8mux1chn3; + i2c20 = &i2c8mux1chn4; + i2c21 = &i2c8mux1chn5; + i2c22 = &i2c8mux1chn6; + i2c23 = &i2c8mux1chn7; + i2c24 = &i2c3mux0chn0; + i2c25 = &i2c3mux0chn1; + i2c26 = &i2c3mux0chn2; + i2c27 = &i2c3mux0chn3; + i2c28 = &i2c3mux0chn4; + i2c29 = &i2c3mux0chn5; + i2c30 = &i2c3mux0chn6; + i2c31 = &i2c3mux0chn7; + i2c32 = &i2c6mux0chn0; + i2c33 = &i2c6mux0chn1; + i2c34 = &i2c6mux0chn2; + i2c35 = &i2c6mux0chn3; + i2c36 = &i2c6mux0chn4; + i2c37 = &i2c6mux0chn5; + i2c38 = &i2c6mux0chn6; + i2c39 = &i2c6mux0chn7; + i2c40 = &i2c7mux0chn0; + i2c41 = &i2c7mux0chn1; + i2c42 = &i2c7mux0chn2; + i2c43 = &i2c7mux0chn3; + i2c44 = &i2c7mux0chn4; + i2c45 = &i2c7mux0chn5; + i2c46 = &i2c7mux0chn6; + i2c47 = &i2c7mux0chn7; + i2c48 = &i2c8mux0chn0; + i2c49 = &i2c8mux0chn1; + i2c50 = &i2c8mux0chn2; + i2c51 = &i2c8mux0chn3; + i2c52 = &i2c8mux0chn4; + i2c53 = &i2c8mux0chn5; + i2c54 = &i2c8mux0chn6; + i2c55 = &i2c8mux0chn7; + i2c56 = &i2c14mux0chn0; + i2c57 = &i2c14mux0chn1; + i2c58 = &i2c14mux0chn2; + i2c59 = &i2c14mux0chn3; + i2c60 = &i2c14mux0chn4; + i2c61 = &i2c14mux0chn5; + i2c62 = &i2c14mux0chn6; + i2c63 = &i2c14mux0chn7; + i2c64 = &i2c15mux0chn0; + i2c65 = &i2c15mux0chn1; + i2c66 = &i2c15mux0chn2; + i2c67 = &i2c15mux0chn3; + i2c68 = &i2c15mux0chn4; + i2c69 = &i2c15mux0chn5; + i2c70 = &i2c15mux0chn6; + i2c71 = &i2c15mux0chn7; + }; + + chosen { + stdout-path = "uart5:115200n8"; + }; + + memory@80000000 { + device_type = "memory"; + reg = <0x80000000 0x40000000>; + }; + + reserved-memory { + #address-cells = <1>; + #size-cells = <1>; + ranges; + + eventlog: tcg-event-log@b3d00000 { + no-map; + reg = <0xb3d00000 0x100000>; + }; + + ramoops@b3e00000 { + compatible = "ramoops"; + reg = <0xb3e00000 0x200000>; /* 16 * (4 * 0x8000) */ + record-size = <0x8000>; + console-size = <0x8000>; + ftrace-size = <0x8000>; + pmsg-size = <0x8000>; + max-reason = <3>; /* KMSG_DUMP_EMERG */ + }; + + /* LPC FW cycle bridge region requires natural alignment */ + flash_memory: region@b4000000 { + no-map; + reg = <0xb4000000 0x04000000>; /* 64M */ + }; + + /* VGA region is dictated by hardware strapping */ + vga_memory: region@bf000000 { + no-map; + compatible = "shared-dma-pool"; + reg = <0xbf000000 0x01000000>; /* 16M */ + }; + }; + + leds { + compatible = "gpio-leds"; + + led-0 { + gpios = <&gpio0 ASPEED_GPIO(L, 7) GPIO_ACTIVE_HIGH>; + }; + + led-1 { + gpios = <&gpio0 ASPEED_GPIO(P, 7) GPIO_ACTIVE_HIGH>; + }; + + led-2 { + gpios = <&gpio0 ASPEED_GPIO(S, 6) GPIO_ACTIVE_HIGH>; + }; + + led-3 { + gpios = <&gpio0 ASPEED_GPIO(S, 7) GPIO_ACTIVE_HIGH>; + }; + + led-4 { + gpios = <&pca3 5 GPIO_ACTIVE_LOW>; + }; + + led-5 { + gpios = <&pca3 6 GPIO_ACTIVE_LOW>; + }; + + led-6 { + gpios = <&pca3 7 GPIO_ACTIVE_LOW>; + }; + + led-7 { + gpios = <&pca3 8 GPIO_ACTIVE_LOW>; + }; + + led-8 { + gpios = <&pca3 9 GPIO_ACTIVE_LOW>; + }; + + led-9 { + gpios = <&pca3 10 GPIO_ACTIVE_LOW>; + }; + + led-a { + gpios = <&pca3 11 GPIO_ACTIVE_LOW>; + }; + + led-b { + gpios = <&pca4 4 GPIO_ACTIVE_HIGH>; + }; + + led-c { + gpios = <&pca4 5 GPIO_ACTIVE_HIGH>; + }; + + led-d { + gpios = <&pca4 6 GPIO_ACTIVE_HIGH>; + }; + + led-e { + gpios = <&pca4 7 GPIO_ACTIVE_HIGH>; + }; + }; + + gpio-keys-polled { + compatible = "gpio-keys-polled"; + poll-interval = <1000>; + + event-nvme0-presence { + label = "nvme0-presence"; + gpios = <&pca4 0 GPIO_ACTIVE_LOW>; + linux,code = <0>; + }; + + event-nvme1-presence { + label = "nvme1-presence"; + gpios = <&pca4 1 GPIO_ACTIVE_LOW>; + linux,code = <1>; + }; + + event-nvme2-presence { + label = "nvme2-presence"; + gpios = <&pca4 2 GPIO_ACTIVE_LOW>; + linux,code = <2>; + }; + + event-nvme3-presence { + label = "nvme3-presence"; + gpios = <&pca4 3 GPIO_ACTIVE_LOW>; + linux,code = <3>; + }; + }; + + iio-hwmon { + compatible = "iio-hwmon"; + io-channels = <&p12v_vd 0>, <&p5v_aux_vd 0>, + <&p5v_bmc_aux_vd 0>, <&p3v3_aux_vd 0>, + <&p3v3_bmc_aux_vd 0>, <&p1v8_bmc_aux_vd 0>, + <&adc1 4>, <&adc0 2>, <&adc1 0>, + <&p2v5_aux_vd 0>, <&adc1 7>; + }; + + p12v_vd: voltage-divider1 { + compatible = "voltage-divider"; + io-channels = <&adc1 3>; + #io-channel-cells = <1>; + + /* + * Scale the system voltage by 1127/127 to fit the ADC range. + * Use small nominator to prevent integer overflow. + */ + output-ohms = <15>; + full-ohms = <133>; + }; + + p5v_aux_vd: voltage-divider2 { + compatible = "voltage-divider"; + io-channels = <&adc1 5>; + #io-channel-cells = <1>; + + /* + * Scale the system voltage by 1365/365 to fit the ADC range. + * Use small nominator to prevent integer overflow. + */ + output-ohms = <50>; + full-ohms = <187>; + }; + + p5v_bmc_aux_vd: voltage-divider3 { + compatible = "voltage-divider"; + io-channels = <&adc0 3>; + #io-channel-cells = <1>; + + /* + * Scale the system voltage by 1365/365 to fit the ADC range. + * Use small nominator to prevent integer overflow. + */ + output-ohms = <50>; + full-ohms = <187>; + }; + + p3v3_aux_vd: voltage-divider4 { + compatible = "voltage-divider"; + io-channels = <&adc1 2>; + #io-channel-cells = <1>; + + /* + * Scale the system voltage by 1698/698 to fit the ADC range. + * Use small nominator to prevent integer overflow. + */ + output-ohms = <14>; + full-ohms = <34>; + }; + + p3v3_bmc_aux_vd: voltage-divider5 { + compatible = "voltage-divider"; + io-channels = <&adc0 7>; + #io-channel-cells = <1>; + + /* + * Scale the system voltage by 1698/698 to fit the ADC range. + * Use small nominator to prevent integer overflow. + */ + output-ohms = <14>; + full-ohms = <34>; + }; + + p1v8_bmc_aux_vd: voltage-divider6 { + compatible = "voltage-divider"; + io-channels = <&adc0 6>; + #io-channel-cells = <1>; + + /* + * Scale the system voltage by 4000/3000 to fit the ADC range. + * Use small nominator to prevent integer overflow. + */ + output-ohms = <3>; + full-ohms = <4>; + }; + + p2v5_aux_vd: voltage-divider7 { + compatible = "voltage-divider"; + io-channels = <&adc1 1>; + #io-channel-cells = <1>; + + /* + * Scale the system voltage by 2100/1100 to fit the ADC range. + * Use small nominator to prevent integer overflow. + */ + output-ohms = <11>; + full-ohms = <21>; + }; + + p1v8_bmc_aux: fixedregulator-p1v8-bmc-aux { + compatible = "regulator-fixed"; + regulator-name = "p1v8_bmc_aux"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; +}; + +&adc0 { + status = "okay"; + vref-supply = <&p1v8_bmc_aux>; + + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_adc0_default + &pinctrl_adc1_default + &pinctrl_adc2_default + &pinctrl_adc3_default + &pinctrl_adc4_default + &pinctrl_adc5_default + &pinctrl_adc6_default + &pinctrl_adc7_default>; +}; + +&adc1 { + status = "okay"; + vref-supply = <&p1v8_bmc_aux>; + aspeed,battery-sensing; + + aspeed,int-vref-microvolt = <2500000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_adc8_default + &pinctrl_adc9_default + &pinctrl_adc10_default + &pinctrl_adc11_default + &pinctrl_adc12_default + &pinctrl_adc13_default + &pinctrl_adc14_default + &pinctrl_adc15_default>; +}; + +&ehci1 { + status = "okay"; +}; + +&uhci { + status = "okay"; +}; + +&gpio0 { + gpio-line-names = + /*A0-A7*/ "","","","","","","","", + /*B0-B7*/ "","","","","bmc-tpm-reset","","","", + /*C0-C7*/ "","","","","","","","", + /*D0-D7*/ "","","","","","","","", + /*E0-E7*/ "","","","","","","","", + /*F0-F7*/ "","","","","","","","", + /*G0-G7*/ "","","","","","","","", + /*H0-H7*/ "","","","","","","","", + /*I0-I7*/ "","","","","","","","", + /*J0-J7*/ "","","","","","","","", + /*K0-K7*/ "","","","","","","","", + /*L0-L7*/ "","","","","","","","bmc-ready", + /*M0-M7*/ "","","","","","","","", + /*N0-N7*/ "","","","","","","","", + /*O0-O7*/ "","","","","","","","", + /*P0-P7*/ "","","","","","","","bmc-hb", + /*Q0-Q7*/ "","","","","","","","", + /*R0-R7*/ "","","","","","","","", + /*S0-S7*/ "","","","","","","rear-enc-fault0","rear-enc-id0", + /*T0-T7*/ "","","","","","","","", + /*U0-U7*/ "","","","","","","","", + /*V0-V7*/ "","rtc-battery-voltage-read-enable","","power-chassis-control","","","","", + /*W0-W7*/ "","","","","","","","", + /*X0-X7*/ "","power-chassis-good","","","","","","", + /*Y0-Y7*/ "","","","","","","","", + /*Z0-Z7*/ "","","","","","","",""; +}; + +&emmc_controller { + status = "okay"; +}; + +&pinctrl_emmc_default { + bias-disable; +}; + +&emmc { + status = "okay"; + clk-phase-mmc-hs200 = <180>, <180>; +}; + +&ibt { + status = "okay"; +}; + +&uart2 { + status = "okay"; +}; + +&vuart1 { + status = "okay"; +}; + +&vuart2 { + status = "okay"; +}; + +&lpc_ctrl { + status = "okay"; + memory-region = <&flash_memory>; +}; + +&mac2 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_rmii3_default>; + clocks = <&syscon ASPEED_CLK_GATE_MAC3CLK>, + <&syscon ASPEED_CLK_MAC3RCLK>; + clock-names = "MACCLK", "RCLK"; + use-ncsi; +}; + +&mac3 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_rmii4_default>; + clocks = <&syscon ASPEED_CLK_GATE_MAC4CLK>, + <&syscon ASPEED_CLK_MAC4RCLK>; + clock-names = "MACCLK", "RCLK"; + use-ncsi; +}; + +&wdt1 { + aspeed,reset-type = "none"; + aspeed,external-signal; + aspeed,ext-push-pull; + aspeed,ext-active-high; + + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_wdtrst1_default>; +}; + +&wdt2 { + status = "okay"; +}; + +&kcs2 { + status = "okay"; + aspeed,lpc-io-reg = <0xca8 0xcac>; +}; + +&kcs3 { + status = "okay"; + aspeed,lpc-io-reg = <0xca2>; + aspeed,lpc-interrupts = <11 IRQ_TYPE_LEVEL_LOW>; +}; + +&i2c0 { + status = "okay"; + + eeprom@50 { + compatible = "atmel,24c64"; + reg = <0x50>; + }; + + regulator@60 { + compatible = "maxim,max8952"; + reg = <0x60>; + + max8952,default-mode = <0>; + max8952,dvs-mode-microvolt = <1250000>, <1200000>, + <1050000>, <950000>; + max8952,sync-freq = <0>; + max8952,ramp-speed = <0>; + + regulator-name = "VR_v77_1v4"; + regulator-min-microvolt = <770000>; + regulator-max-microvolt = <1400000>; + regulator-always-on; + regulator-boot-on; + }; +}; + +&i2c1 { + status = "okay"; + + regulator@42 { + compatible = "infineon,ir38263"; + reg = <0x42>; + }; + + led-controller@60 { + compatible = "nxp,pca9552"; + reg = <0x60>; + #address-cells = <1>; + #size-cells = <0>; + + gpio-controller; + #gpio-cells = <2>; + + led@0 { + label = "nic1-perst"; + reg = <0>; + retain-state-shutdown; + default-state = "keep"; + type = <PCA955X_TYPE_LED>; + }; + + led@1 { + label = "bmc-perst"; + reg = <1>; + retain-state-shutdown; + default-state = "keep"; + type = <PCA955X_TYPE_LED>; + }; + + led@2 { + label = "reset-M2-SSD1-2-perst"; + reg = <2>; + retain-state-shutdown; + default-state = "keep"; + type = <PCA955X_TYPE_LED>; + }; + + led@3 { + label = "pcie-perst1"; + reg = <3>; + retain-state-shutdown; + default-state = "keep"; + type = <PCA955X_TYPE_LED>; + }; + + led@4 { + label = "pcie-perst2"; + reg = <4>; + retain-state-shutdown; + default-state = "keep"; + type = <PCA955X_TYPE_LED>; + }; + + led@5 { + label = "pcie-perst3"; + reg = <5>; + retain-state-shutdown; + default-state = "keep"; + type = <PCA955X_TYPE_LED>; + }; + + led@6 { + label = "pcie-perst4"; + reg = <6>; + retain-state-shutdown; + default-state = "keep"; + type = <PCA955X_TYPE_LED>; + }; + + led@7 { + label = "pcie-perst5"; + reg = <7>; + retain-state-shutdown; + default-state = "keep"; + type = <PCA955X_TYPE_LED>; + }; + + led@8 { + label = "pcie-perst6"; + reg = <8>; + retain-state-shutdown; + default-state = "keep"; + type = <PCA955X_TYPE_LED>; + }; + + led@9 { + label = "pcie-perst7"; + reg = <9>; + retain-state-shutdown; + default-state = "keep"; + type = <PCA955X_TYPE_LED>; + }; + + led@10 { + label = "pcie-perst8"; + reg = <10>; + retain-state-shutdown; + default-state = "keep"; + type = <PCA955X_TYPE_LED>; + }; + + led@11 { + label = "PV-cp0-sw1stk4-perst"; + reg = <11>; + retain-state-shutdown; + default-state = "keep"; + type = <PCA955X_TYPE_LED>; + }; + + led@12 { + label = "PV-cp0-sw1stk5-perst"; + reg = <12>; + retain-state-shutdown; + default-state = "keep"; + type = <PCA955X_TYPE_LED>; + }; + + led@13 { + label = "pe-cp-drv0-perst"; + reg = <13>; + retain-state-shutdown; + default-state = "keep"; + type = <PCA955X_TYPE_LED>; + }; + + led@14 { + label = "pe-cp-drv1-perst"; + reg = <14>; + retain-state-shutdown; + default-state = "keep"; + type = <PCA955X_TYPE_LED>; + }; + + led@15 { + label = "lom-perst"; + reg = <15>; + retain-state-shutdown; + default-state = "keep"; + type = <PCA955X_TYPE_LED>; + }; + }; + + gpio@74 { + compatible = "nxp,pca9539"; + reg = <0x74>; + + gpio-controller; + #gpio-cells = <2>; + + gpio-line-names = + "PLUG_DETECT_PCIE_J101_N", + "PLUG_DETECT_PCIE_J102_N", + "PLUG_DETECT_PCIE_J103_N", + "PLUG_DETECT_PCIE_J104_N", + "PLUG_DETECT_PCIE_J105_N", + "PLUG_DETECT_PCIE_J106_N", + "PLUG_DETECT_PCIE_J107_N", + "PLUG_DETECT_PCIE_J108_N", + "PLUG_DETECT_M2_SSD1_N", + "PLUG_DETECT_NIC1_N", + "SEL_SMB_DIMM_CPU0", + "presence-ps2", + "presence-ps3", + "", "", + "PWRBRD_PLUG_DETECT2_N"; + }; +}; + +&i2c2 { + status = "okay"; + + power-supply@58 { + compatible = "ibm,cffps"; + reg = <0x58>; + }; + + power-supply@59 { + compatible = "ibm,cffps"; + reg = <0x59>; + }; + + power-supply@5a { + compatible = "ibm,cffps"; + reg = <0x5a>; + }; + + power-supply@5b { + compatible = "ibm,cffps"; + reg = <0x5b>; + }; +}; + +&i2c3 { + status = "okay"; + + i2c-mux@70 { + compatible = "nxp,pca9548"; + reg = <0x70>; + #address-cells = <1>; + #size-cells = <0>; + i2c-mux-idle-disconnect; + + i2c3mux0chn0: i2c@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + }; + + i2c3mux0chn1: i2c@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + }; + + i2c3mux0chn2: i2c@2 { + #address-cells = <1>; + #size-cells = <0>; + reg = <2>; + }; + + i2c3mux0chn3: i2c@3 { + #address-cells = <1>; + #size-cells = <0>; + reg = <3>; + }; + + i2c3mux0chn4: i2c@4 { + #address-cells = <1>; + #size-cells = <0>; + reg = <4>; + }; + + i2c3mux0chn5: i2c@5 { + #address-cells = <1>; + #size-cells = <0>; + reg = <5>; + }; + + i2c3mux0chn6: i2c@6 { + #address-cells = <1>; + #size-cells = <0>; + reg = <6>; + }; + + i2c3mux0chn7: i2c@7 { + #address-cells = <1>; + #size-cells = <0>; + reg = <7>; + }; + }; +}; + +&i2c4 { + status = "okay"; +}; + +&i2c5 { + status = "okay"; + + regulator@42 { + compatible = "infineon,ir38263"; + reg = <0x42>; + }; + + regulator@43 { + compatible = "infineon,ir38060"; + reg = <0x43>; + }; +}; + +&i2c6 { + status = "okay"; + + fan-controller@52 { + compatible = "maxim,max31785a"; + reg = <0x52>; + }; + + fan-controller@54 { + compatible = "maxim,max31785a"; + reg = <0x54>; + }; + + eeprom@55 { + compatible = "atmel,24c64"; + reg = <0x55>; + }; + + i2c-mux@70 { + compatible = "nxp,pca9548"; + reg = <0x70>; + #address-cells = <1>; + #size-cells = <0>; + i2c-mux-idle-disconnect; + + i2c6mux0chn0: i2c@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + }; + + i2c6mux0chn1: i2c@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + }; + + i2c6mux0chn2: i2c@2 { + #address-cells = <1>; + #size-cells = <0>; + reg = <2>; + }; + + i2c6mux0chn3: i2c@3 { + #address-cells = <1>; + #size-cells = <0>; + reg = <3>; + }; + + i2c6mux0chn4: i2c@4 { + #address-cells = <1>; + #size-cells = <0>; + reg = <4>; + + humidity-sensor@40 { + compatible = "ti,hdc1080"; + reg = <0x40>; + }; + + temperature-sensor@48 { + compatible = "ti,tmp275"; + reg = <0x48>; + }; + + eeprom@50 { + compatible = "atmel,24c32"; + reg = <0x50>; + }; + + led-controller@60 { + compatible = "nxp,pca9551"; + reg = <0x60>; + #address-cells = <1>; + #size-cells = <0>; + + gpio-controller; + #gpio-cells = <2>; + + led@0 { + label = "enclosure-id-led"; + reg = <0>; + retain-state-shutdown; + default-state = "keep"; + type = <PCA955X_TYPE_LED>; + }; + + led@1 { + label = "attention-led"; + reg = <1>; + retain-state-shutdown; + default-state = "keep"; + type = <PCA955X_TYPE_LED>; + }; + + led@2 { + label = "enclosure-fault-rollup-led"; + reg = <2>; + retain-state-shutdown; + default-state = "keep"; + type = <PCA955X_TYPE_LED>; + }; + + led@3 { + label = "power-on-led"; + reg = <3>; + retain-state-shutdown; + default-state = "keep"; + type = <PCA955X_TYPE_LED>; + }; + }; + + temperature-sensor@76 { + compatible = "infineon,dps310"; + reg = <0x76>; + }; + }; + + i2c6mux0chn5: i2c@5 { + #address-cells = <1>; + #size-cells = <0>; + reg = <5>; + }; + + i2c6mux0chn6: i2c@6 { + #address-cells = <1>; + #size-cells = <0>; + reg = <6>; + }; + + i2c6mux0chn7: i2c@7 { + #address-cells = <1>; + #size-cells = <0>; + reg = <7>; + }; + }; + + pca3: gpio@74 { + compatible = "nxp,pca9539"; + reg = <0x74>; + + gpio-controller; + #gpio-cells = <2>; + }; + + pca4: gpio@77 { + compatible = "nxp,pca9539"; + reg = <0x77>; + + gpio-controller; + #gpio-cells = <2>; + + gpio-line-names = + "PE_NVMED0_EXP_PRSNT_N", + "PE_NVMED1_EXP_PRSNT_N", + "PE_NVMED2_EXP_PRSNT_N", + "PE_NVMED3_EXP_PRSNT_N", + "LED_FAULT_NVMED0", + "LED_FAULT_NVMED1", + "LED_FAULT_NVMED2", + "LED_FAULT_NVMED3", + "FAN0_PRESENCE_R_N", + "FAN1_PRESENCE_R_N", + "FAN2_PRESENCE_R_N", + "FAN3_PRESENCE_R_N", + "FAN4_PRESENCE_R_N", + "FAN5_PRESENCE_N", + "FAN6_PRESENCE_N", + ""; + }; +}; + +&i2c7 { + status = "okay"; + + i2c-mux@70 { + compatible = "nxp,pca9548"; + reg = <0x70>; + #address-cells = <1>; + #size-cells = <0>; + i2c-mux-idle-disconnect; + + i2c7mux0chn0: i2c@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + }; + + i2c7mux0chn1: i2c@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + }; + + i2c7mux0chn2: i2c@2 { + #address-cells = <1>; + #size-cells = <0>; + reg = <2>; + }; + + i2c7mux0chn3: i2c@3 { + #address-cells = <1>; + #size-cells = <0>; + reg = <3>; + + regulator@58 { + compatible = "mps,mp2973"; + reg = <0x58>; + }; + }; + + i2c7mux0chn4: i2c@4 { + #address-cells = <1>; + #size-cells = <0>; + reg = <4>; + }; + + i2c7mux0chn5: i2c@5 { + #address-cells = <1>; + #size-cells = <0>; + reg = <5>; + + regulator@40 { + compatible = "infineon,tda38640"; + reg = <0x40>; + }; + }; + + i2c7mux0chn6: i2c@6 { + #address-cells = <1>; + #size-cells = <0>; + reg = <6>; + }; + + i2c7mux0chn7: i2c@7 { + #address-cells = <1>; + #size-cells = <0>; + reg = <7>; + }; + }; +}; + +&i2c8 { + status = "okay"; + + i2c-mux@71 { + compatible = "nxp,pca9548"; + reg = <0x71>; + #address-cells = <1>; + #size-cells = <0>; + i2c-mux-idle-disconnect; + + i2c8mux0chn0: i2c@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + + regulator@58 { + compatible = "mps,mp2971"; + reg = <0x58>; + }; + }; + + i2c8mux0chn1: i2c@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + + regulator@40 { + compatible = "infineon,tda38640"; + reg = <0x40>; + }; + + regulator@41 { + compatible = "infineon,tda38640"; + reg = <0x41>; + }; + + regulator@58 { + compatible = "mps,mp2971"; + reg = <0x58>; + }; + + regulator@5b { + compatible = "mps,mp2971"; + reg = <0x5b>; + }; + }; + + i2c8mux0chn2: i2c@2 { + #address-cells = <1>; + #size-cells = <0>; + reg = <2>; + }; + + i2c8mux0chn3: i2c@3 { + #address-cells = <1>; + #size-cells = <0>; + reg = <3>; + }; + + i2c8mux0chn4: i2c@4 { + #address-cells = <1>; + #size-cells = <0>; + reg = <4>; + + i2c-mux@70 { + compatible = "nxp,pca9548"; + reg = <0x70>; + #address-cells = <1>; + #size-cells = <0>; + i2c-mux-idle-disconnect; + + i2c8mux1chn0: i2c@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + }; + + i2c8mux1chn1: i2c@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + }; + + i2c8mux1chn2: i2c@2 { + #address-cells = <1>; + #size-cells = <0>; + reg = <2>; + }; + + i2c8mux1chn3: i2c@3 { + #address-cells = <1>; + #size-cells = <0>; + reg = <3>; + }; + + i2c8mux1chn4: i2c@4 { + #address-cells = <1>; + #size-cells = <0>; + reg = <4>; + }; + + i2c8mux1chn5: i2c@5 { + #address-cells = <1>; + #size-cells = <0>; + reg = <5>; + }; + + i2c8mux1chn6: i2c@6 { + #address-cells = <1>; + #size-cells = <0>; + reg = <6>; + }; + + i2c8mux1chn7: i2c@7 { + #address-cells = <1>; + #size-cells = <0>; + reg = <7>; + }; + }; + }; + + i2c8mux0chn5: i2c@5 { + #address-cells = <1>; + #size-cells = <0>; + reg = <5>; + }; + + i2c8mux0chn6: i2c@6 { + #address-cells = <1>; + #size-cells = <0>; + reg = <6>; + + temperature-sensor@4c { + compatible = "ti,tmp423"; + reg = <0x4c>; + }; + }; + + i2c8mux0chn7: i2c@7 { + #address-cells = <1>; + #size-cells = <0>; + reg = <7>; + + regulator@40 { + compatible = "infineon,ir38060"; + reg = <0x40>; + }; + }; + }; +}; + +&i2c9 { + status = "okay"; + + regulator@40 { + compatible = "infineon,ir38263"; + reg = <0x40>; + }; + + regulator@41 { + compatible = "infineon,ir38263"; + reg = <0x41>; + }; + + eeprom@50 { + compatible = "atmel,24c64"; + reg = <0x50>; + }; + + regulator@60 { + compatible = "maxim,max8952"; + reg = <0x60>; + + max8952,default-mode = <0>; + max8952,dvs-mode-microvolt = <1250000>, <1200000>, + <1050000>, <950000>; + max8952,sync-freq = <0>; + max8952,ramp-speed = <0>; + + regulator-name = "VR_v77_1v4"; + regulator-min-microvolt = <770000>; + regulator-max-microvolt = <1400000>; + regulator-always-on; + regulator-boot-on; + }; +}; + +&i2c11 { + status = "okay"; + + tpm@2e { + compatible = "tcg,tpm-tis-i2c"; + reg = <0x2e>; + memory-region = <&eventlog>; + }; +}; + +&i2c12 { + status = "okay"; +}; + +&i2c13 { + status = "okay"; + + regulator@41 { + compatible = "infineon,ir38263"; + reg = <0x41>; + }; + + led-controller@61 { + compatible = "nxp,pca9552"; + reg = <0x61>; + #address-cells = <1>; + #size-cells = <0>; + + gpio-controller; + #gpio-cells = <2>; + + led@0 { + label = "efuse-12v-slots"; + reg = <0>; + retain-state-shutdown; + default-state = "keep"; + type = <PCA955X_TYPE_LED>; + }; + + led@1 { + label = "efuse-3p3v-slot"; + reg = <1>; + retain-state-shutdown; + default-state = "keep"; + type = <PCA955X_TYPE_LED>; + }; + + led@3 { + label = "nic2-pert"; + reg = <3>; + retain-state-shutdown; + default-state = "keep"; + type = <PCA955X_TYPE_LED>; + }; + + led@4 { + label = "pcie-perst9"; + reg = <4>; + retain-state-shutdown; + default-state = "keep"; + type = <PCA955X_TYPE_LED>; + }; + + led@5 { + label = "pcie-perst10"; + reg = <5>; + retain-state-shutdown; + default-state = "keep"; + type = <PCA955X_TYPE_LED>; + }; + + led@6 { + label = "pcie-perst11"; + reg = <6>; + retain-state-shutdown; + default-state = "keep"; + type = <PCA955X_TYPE_LED>; + }; + + led@7 { + label = "pcie-perst12"; + reg = <7>; + retain-state-shutdown; + default-state = "keep"; + type = <PCA955X_TYPE_LED>; + }; + + led@8 { + label = "pcie-perst13"; + reg = <8>; + retain-state-shutdown; + default-state = "keep"; + type = <PCA955X_TYPE_LED>; + }; + + led@9 { + label = "pcie-perst14"; + reg = <9>; + retain-state-shutdown; + default-state = "keep"; + type = <PCA955X_TYPE_LED>; + }; + + led@10 { + label = "pcie-perst15"; + reg = <10>; + retain-state-shutdown; + default-state = "keep"; + type = <PCA955X_TYPE_LED>; + }; + + led@11 { + label = "pcie-perst16"; + reg = <11>; + retain-state-shutdown; + default-state = "keep"; + type = <PCA955X_TYPE_LED>; + }; + + led@12 { + label = "PV-cp1-sw1stk4-perst"; + reg = <12>; + retain-state-shutdown; + default-state = "keep"; + type = <PCA955X_TYPE_LED>; + }; + + led@13 { + label = "PV-cp1-sw1stk5-perst"; + reg = <13>; + retain-state-shutdown; + default-state = "keep"; + type = <PCA955X_TYPE_LED>; + }; + + led@14 { + label = "pe-cp-drv2-perst"; + reg = <14>; + retain-state-shutdown; + default-state = "keep"; + type = <PCA955X_TYPE_LED>; + }; + + led@15 { + label = "pe-cp-drv3-perst"; + reg = <15>; + retain-state-shutdown; + default-state = "keep"; + type = <PCA955X_TYPE_LED>; + }; + }; + + gpio@75 { + compatible = "nxp,pca9539"; + reg = <0x75>; + + gpio-controller; + #gpio-cells = <2>; + + gpio-line-names = + "PLUG_DETECT_PCIE_J109_N", + "PLUG_DETECT_PCIE_J110_N", + "PLUG_DETECT_PCIE_J111_N", + "PLUG_DETECT_PCIE_J112_N", + "PLUG_DETECT_PCIE_J113_N", + "PLUG_DETECT_PCIE_J114_N", + "PLUG_DETECT_PCIE_J115_N", + "PLUG_DETECT_PCIE_J116_N", + "PLUG_DETECT_M2_SSD2_N", + "PLUG_DETECT_NIC2_N", + "SEL_SMB_DIMM_CPU1", + "presence-ps0", + "presence-ps1", + "", "", + "PWRBRD_PLUG_DETECT1_N"; + }; + + gpio@76 { + compatible = "nxp,pca9539"; + reg = <0x76>; + + gpio-controller; + #gpio-cells = <2>; + + gpio-line-names = + "SW1_BOOTRCVRYB1_N", + "SW1_BOOTRCVRYB0_N", + "SW2_BOOTRCVRYB1_N", + "SW2_BOOTRCVRYB0_N", + "SW3_4_BOOTRCVRYB1_N", + "SW3_4_BOOTRCVRYB0_N", + "SW5_BOOTRCVRYB1_N", + "SW5_BOOTRCVRYB0_N", + "SW6_BOOTRCVRYB1_N", + "SW6_BOOTRCVRYB0_N", + "SW1_RESET_N", + "SW3_RESET_N", + "SW4_RESET_N", + "SW2_RESET_N", + "SW5_RESET_N", + "SW6_RESET_N"; + }; +}; + +&i2c14 { + status = "okay"; + + i2c-mux@70 { + compatible = "nxp,pca9548"; + reg = <0x70>; + #address-cells = <1>; + #size-cells = <0>; + i2c-mux-idle-disconnect; + + i2c14mux0chn0: i2c@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + }; + + i2c14mux0chn1: i2c@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + }; + + i2c14mux0chn2: i2c@2 { + #address-cells = <1>; + #size-cells = <0>; + reg = <2>; + }; + + i2c14mux0chn3: i2c@3 { + #address-cells = <1>; + #size-cells = <0>; + reg = <3>; + + regulator@58 { + compatible = "mps,mp2973"; + reg = <0x58>; + }; + }; + + i2c14mux0chn4: i2c@4 { + #address-cells = <1>; + #size-cells = <0>; + reg = <4>; + }; + + i2c14mux0chn5: i2c@5 { + #address-cells = <1>; + #size-cells = <0>; + reg = <5>; + + regulator@40 { + compatible = "infineon,tda38640"; + reg = <0x40>; + }; + }; + + i2c14mux0chn6: i2c@6 { + #address-cells = <1>; + #size-cells = <0>; + reg = <6>; + }; + + i2c14mux0chn7: i2c@7 { + #address-cells = <1>; + #size-cells = <0>; + reg = <7>; + }; + }; +}; + +&i2c15 { + status = "okay"; + + i2c-mux@71 { + compatible = "nxp,pca9548"; + reg = <0x71>; + #address-cells = <1>; + #size-cells = <0>; + i2c-mux-idle-disconnect; + + i2c15mux0chn0: i2c@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + + regulator@58 { + compatible = "mps,mp2971"; + reg = <0x58>; + }; + }; + + i2c15mux0chn1: i2c@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + + regulator@40 { + compatible = "infineon,tda38640"; + reg = <0x40>; + }; + + regulator@41 { + compatible = "infineon,tda38640"; + reg = <0x41>; + }; + + regulator@58 { + compatible = "mps,mp2971"; + reg = <0x58>; + }; + + regulator@5b { + compatible = "mps,mp2971"; + reg = <0x5b>; + }; + }; + + i2c15mux0chn2: i2c@2 { + #address-cells = <1>; + #size-cells = <0>; + reg = <2>; + }; + + i2c15mux0chn3: i2c@3 { + #address-cells = <1>; + #size-cells = <0>; + reg = <3>; + }; + + i2c15mux0chn4: i2c@4 { + #address-cells = <1>; + #size-cells = <0>; + reg = <4>; + + i2c-mux@70 { + compatible = "nxp,pca9548"; + reg = <0x70>; + #address-cells = <1>; + #size-cells = <0>; + i2c-mux-idle-disconnect; + + i2c15mux1chn0: i2c@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + }; + + i2c15mux1chn1: i2c@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + }; + + i2c15mux1chn2: i2c@2 { + #address-cells = <1>; + #size-cells = <0>; + reg = <2>; + }; + + i2c15mux1chn3: i2c@3 { + #address-cells = <1>; + #size-cells = <0>; + reg = <3>; + }; + + i2c15mux1chn4: i2c@4 { + #address-cells = <1>; + #size-cells = <0>; + reg = <4>; + }; + + i2c15mux1chn5: i2c@5 { + #address-cells = <1>; + #size-cells = <0>; + reg = <5>; + }; + + i2c15mux1chn6: i2c@6 { + #address-cells = <1>; + #size-cells = <0>; + reg = <6>; + }; + + i2c15mux1chn7: i2c@7 { + #address-cells = <1>; + #size-cells = <0>; + reg = <7>; + }; + }; + }; + + i2c15mux0chn5: i2c@5 { + #address-cells = <1>; + #size-cells = <0>; + reg = <5>; + }; + + i2c15mux0chn6: i2c@6 { + #address-cells = <1>; + #size-cells = <0>; + reg = <6>; + + temperature-sensor@4c { + compatible = "ti,tmp423"; + reg = <0x4c>; + }; + }; + + i2c15mux0chn7: i2c@7 { + #address-cells = <1>; + #size-cells = <0>; + reg = <7>; + + regulator@40 { + compatible = "infineon,ir38060"; + reg = <0x40>; + }; + + temperature-sensor@4c { + compatible = "ti,tmp423"; + reg = <0x4c>; + }; + }; + }; +}; diff --git a/arch/arm/boot/dts/aspeed/aspeed-g6.dtsi b/arch/arm/boot/dts/aspeed/aspeed-g6.dtsi index 29f94696d8b1..7fb421153596 100644 --- a/arch/arm/boot/dts/aspeed/aspeed-g6.dtsi +++ b/arch/arm/boot/dts/aspeed/aspeed-g6.dtsi @@ -867,22 +867,26 @@ }; fsim0: fsi@1e79b000 { + #interrupt-cells = <1>; compatible = "aspeed,ast2600-fsi-master", "fsi-master"; reg = <0x1e79b000 0x94>; interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_fsi1_default>; clocks = <&syscon ASPEED_CLK_GATE_FSICLK>; + interrupt-controller; status = "disabled"; }; fsim1: fsi@1e79b100 { + #interrupt-cells = <1>; compatible = "aspeed,ast2600-fsi-master", "fsi-master"; reg = <0x1e79b100 0x94>; interrupts = <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_fsi2_default>; clocks = <&syscon ASPEED_CLK_GATE_FSICLK>; + interrupt-controller; status = "disabled"; }; diff --git a/arch/arm/boot/dts/aspeed/ibm-power10-dual.dtsi b/arch/arm/boot/dts/aspeed/ibm-power10-dual.dtsi index cc466910bb52..07ce3b2bc62a 100644 --- a/arch/arm/boot/dts/aspeed/ibm-power10-dual.dtsi +++ b/arch/arm/boot/dts/aspeed/ibm-power10-dual.dtsi @@ -165,10 +165,12 @@ }; fsi_hub0: hub@3400 { + #interrupt-cells = <1>; compatible = "fsi-master-hub"; reg = <0x3400 0x400>; #address-cells = <2>; #size-cells = <0>; + interrupt-controller; }; }; }; diff --git a/arch/arm64/boot/dts/amlogic/Makefile b/arch/arm64/boot/dts/amlogic/Makefile index 1ab160bf928a..0f29517da5ec 100644 --- a/arch/arm64/boot/dts/amlogic/Makefile +++ b/arch/arm64/boot/dts/amlogic/Makefile @@ -1,4 +1,6 @@ # SPDX-License-Identifier: GPL-2.0 +dtb-$(CONFIG_ARCH_MESON) += amlogic-a4-a113l2-ba400.dtb +dtb-$(CONFIG_ARCH_MESON) += amlogic-a5-a113x2-av400.dtb dtb-$(CONFIG_ARCH_MESON) += amlogic-c3-c302x-aw409.dtb dtb-$(CONFIG_ARCH_MESON) += amlogic-t7-a311d2-an400.dtb dtb-$(CONFIG_ARCH_MESON) += amlogic-t7-a311d2-khadas-vim4.dtb @@ -16,7 +18,9 @@ dtb-$(CONFIG_ARCH_MESON) += meson-g12a-u200.dtb dtb-$(CONFIG_ARCH_MESON) += meson-g12a-x96-max.dtb dtb-$(CONFIG_ARCH_MESON) += meson-g12b-a311d-bananapi-m2s.dtb dtb-$(CONFIG_ARCH_MESON) += meson-g12b-a311d-khadas-vim3.dtb +dtb-$(CONFIG_ARCH_MESON) += meson-g12b-a311d-khadas-vim3-ts050.dtb dtb-$(CONFIG_ARCH_MESON) += meson-g12b-bananapi-cm4-cm4io.dtb +dtb-$(CONFIG_ARCH_MESON) += meson-g12b-bananapi-cm4-mnt-reform2.dtb dtb-$(CONFIG_ARCH_MESON) += meson-g12b-gsking-x.dtb dtb-$(CONFIG_ARCH_MESON) += meson-g12b-gtking-pro.dtb dtb-$(CONFIG_ARCH_MESON) += meson-g12b-gtking.dtb @@ -76,6 +80,7 @@ dtb-$(CONFIG_ARCH_MESON) += meson-sm1-bananapi-m2-pro.dtb dtb-$(CONFIG_ARCH_MESON) += meson-sm1-bananapi-m5.dtb dtb-$(CONFIG_ARCH_MESON) += meson-sm1-h96-max.dtb dtb-$(CONFIG_ARCH_MESON) += meson-sm1-khadas-vim3l.dtb +dtb-$(CONFIG_ARCH_MESON) += meson-sm1-khadas-vim3l-ts050.dtb dtb-$(CONFIG_ARCH_MESON) += meson-sm1-s905d3-libretech-cc.dtb dtb-$(CONFIG_ARCH_MESON) += meson-sm1-odroid-c4.dtb dtb-$(CONFIG_ARCH_MESON) += meson-sm1-odroid-hc4.dtb @@ -86,3 +91,5 @@ dtb-$(CONFIG_ARCH_MESON) += meson-sm1-x96-air.dtb # Overlays meson-g12a-fbx8am-brcm-dtbs := meson-g12a-fbx8am.dtb meson-g12a-fbx8am-brcm.dtbo meson-g12a-fbx8am-realtek-dtbs := meson-g12a-fbx8am.dtb meson-g12a-fbx8am-realtek.dtbo +meson-g12b-a311d-khadas-vim3-ts050-dtbs := meson-g12b-a311d-khadas-vim3.dtb meson-khadas-vim3-ts050.dtbo +meson-sm1-khadas-vim3l-ts050-dtbs := meson-sm1-khadas-vim3l.dtb meson-khadas-vim3-ts050.dtbo diff --git a/arch/arm64/boot/dts/amlogic/amlogic-a4-a113l2-ba400.dts b/arch/arm64/boot/dts/amlogic/amlogic-a4-a113l2-ba400.dts new file mode 100644 index 000000000000..ad3127e695d9 --- /dev/null +++ b/arch/arm64/boot/dts/amlogic/amlogic-a4-a113l2-ba400.dts @@ -0,0 +1,42 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (c) 2024 Amlogic, Inc. All rights reserved. + */ + +/dts-v1/; + +#include "amlogic-a4.dtsi" + +/ { + model = "Amlogic A113L2 ba400 Development Board"; + compatible = "amlogic,ba400", "amlogic,a4"; + interrupt-parent = <&gic>; + #address-cells = <2>; + #size-cells = <2>; + + aliases { + serial0 = &uart_b; + }; + + memory@0 { + device_type = "memory"; + reg = <0x0 0x0 0x0 0x40000000>; + }; + + reserved-memory { + #address-cells = <2>; + #size-cells = <2>; + ranges; + + /* 10 MiB reserved for ARM Trusted Firmware */ + secmon_reserved: secmon@5000000 { + compatible = "shared-dma-pool"; + reg = <0x0 0x05000000 0x0 0xa00000>; + no-map; + }; + }; +}; + +&uart_b { + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/amlogic/amlogic-a4-common.dtsi b/arch/arm64/boot/dts/amlogic/amlogic-a4-common.dtsi new file mode 100644 index 000000000000..b6106ad4a072 --- /dev/null +++ b/arch/arm64/boot/dts/amlogic/amlogic-a4-common.dtsi @@ -0,0 +1,66 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (c) 2024 Amlogic, Inc. All rights reserved. + */ + +#include <dt-bindings/interrupt-controller/irq.h> +#include <dt-bindings/interrupt-controller/arm-gic.h> +#include <dt-bindings/gpio/gpio.h> +/ { + timer { + compatible = "arm,armv8-timer"; + interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>; + }; + + psci { + compatible = "arm,psci-1.0"; + method = "smc"; + }; + + xtal: xtal-clk { + compatible = "fixed-clock"; + clock-frequency = <24000000>; + clock-output-names = "xtal"; + #clock-cells = <0>; + }; + + soc { + compatible = "simple-bus"; + #address-cells = <2>; + #size-cells = <2>; + ranges; + + gic: interrupt-controller@fff01000 { + compatible = "arm,gic-400"; + reg = <0x0 0xfff01000 0 0x1000>, + <0x0 0xfff02000 0 0x2000>, + <0x0 0xfff04000 0 0x2000>, + <0x0 0xfff06000 0 0x2000>; + #interrupt-cells = <3>; + #address-cells = <0>; + interrupt-controller; + interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>; + }; + + apb: bus@fe000000 { + compatible = "simple-bus"; + reg = <0x0 0xfe000000 0x0 0x480000>; + #address-cells = <2>; + #size-cells = <2>; + ranges = <0x0 0x0 0x0 0xfe000000 0x0 0x480000>; + + uart_b: serial@7a000 { + compatible = "amlogic,a4-uart", + "amlogic,meson-s4-uart"; + reg = <0x0 0x7a000 0x0 0x18>; + interrupts = <GIC_SPI 169 IRQ_TYPE_EDGE_RISING>; + clocks = <&xtal>, <&xtal>, <&xtal>; + clock-names = "xtal", "pclk", "baud"; + status = "disabled"; + }; + }; + }; +}; diff --git a/arch/arm64/boot/dts/amlogic/amlogic-a4.dtsi b/arch/arm64/boot/dts/amlogic/amlogic-a4.dtsi new file mode 100644 index 000000000000..73ca1d7eed81 --- /dev/null +++ b/arch/arm64/boot/dts/amlogic/amlogic-a4.dtsi @@ -0,0 +1,40 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (c) 2024 Amlogic, Inc. All rights reserved. + */ + +#include "amlogic-a4-common.dtsi" +/ { + cpus { + #address-cells = <2>; + #size-cells = <0>; + + cpu0: cpu@0 { + device_type = "cpu"; + compatible = "arm,cortex-a53"; + reg = <0x0 0x0>; + enable-method = "psci"; + }; + + cpu1: cpu@1 { + device_type = "cpu"; + compatible = "arm,cortex-a53"; + reg = <0x0 0x1>; + enable-method = "psci"; + }; + + cpu2: cpu@2 { + device_type = "cpu"; + compatible = "arm,cortex-a53"; + reg = <0x0 0x2>; + enable-method = "psci"; + }; + + cpu3: cpu@3 { + device_type = "cpu"; + compatible = "arm,cortex-a53"; + reg = <0x0 0x3>; + enable-method = "psci"; + }; + }; +}; diff --git a/arch/arm64/boot/dts/amlogic/amlogic-a5-a113x2-av400.dts b/arch/arm64/boot/dts/amlogic/amlogic-a5-a113x2-av400.dts new file mode 100644 index 000000000000..11d8b88c1ce5 --- /dev/null +++ b/arch/arm64/boot/dts/amlogic/amlogic-a5-a113x2-av400.dts @@ -0,0 +1,42 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (c) 2024 Amlogic, Inc. All rights reserved. + */ + +/dts-v1/; + +#include "amlogic-a5.dtsi" + +/ { + model = "Amlogic A113X2 av400 Development Board"; + compatible = "amlogic,av400", "amlogic,a5"; + interrupt-parent = <&gic>; + #address-cells = <2>; + #size-cells = <2>; + + aliases { + serial0 = &uart_b; + }; + + memory@0 { + device_type = "memory"; + reg = <0x0 0x0 0x0 0x40000000>; + }; + + reserved-memory { + #address-cells = <2>; + #size-cells = <2>; + ranges; + + /* 10 MiB reserved for ARM Trusted Firmware */ + secmon_reserved: secmon@5000000 { + compatible = "shared-dma-pool"; + reg = <0x0 0x05000000 0x0 0xa00000>; + no-map; + }; + }; +}; + +&uart_b { + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/amlogic/amlogic-a5.dtsi b/arch/arm64/boot/dts/amlogic/amlogic-a5.dtsi new file mode 100644 index 000000000000..43f68a7da2f7 --- /dev/null +++ b/arch/arm64/boot/dts/amlogic/amlogic-a5.dtsi @@ -0,0 +1,40 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (c) 2024 Amlogic, Inc. All rights reserved. + */ + +#include "amlogic-a4-common.dtsi" +/ { + cpus { + #address-cells = <2>; + #size-cells = <0>; + + cpu0: cpu@0 { + device_type = "cpu"; + compatible = "arm,cortex-a55"; + reg = <0x0 0x0>; + enable-method = "psci"; + }; + + cpu1: cpu@100 { + device_type = "cpu"; + compatible = "arm,cortex-a55"; + reg = <0x0 0x100>; + enable-method = "psci"; + }; + + cpu2: cpu@200 { + device_type = "cpu"; + compatible = "arm,cortex-a55"; + reg = <0x0 0x200>; + enable-method = "psci"; + }; + + cpu3: cpu@300 { + device_type = "cpu"; + compatible = "arm,cortex-a55"; + reg = <0x0 0x300>; + enable-method = "psci"; + }; + }; +}; diff --git a/arch/arm64/boot/dts/amlogic/amlogic-t7-reset.h b/arch/arm64/boot/dts/amlogic/amlogic-t7-reset.h new file mode 100644 index 000000000000..ec90a11df508 --- /dev/null +++ b/arch/arm64/boot/dts/amlogic/amlogic-t7-reset.h @@ -0,0 +1,197 @@ +/* SPDX-License-Identifier: (GPL-2.0-only OR MIT) */ +/* + * Copyright (c) 2024 Amlogic, Inc. All rights reserved. + */ + +#ifndef __DTS_AMLOGIC_T7_RESET_H +#define __DTS_AMLOGIC_T7_RESET_H + +/* RESET0 */ +/* 0-3 */ +#define RESET_USB 4 +#define RESET_U2DRD 5 +#define RESET_U3DRD 6 +#define RESET_U3DRD_PIPE0 7 +#define RESET_U2PHY20 8 +#define RESET_U2PHY21 9 +#define RESET_GDC 10 +#define RESET_HDMI20_AES 11 +#define RESET_HDMIRX 12 +#define RESET_HDMIRX_APB 13 +#define RESET_DEWARP 14 +/* 15 */ +#define RESET_HDMITX_CAPB3 16 +#define RESET_BRG_VCBUG_DEC 17 +#define RESET_VCBUS 18 +#define RESET_VID_PLL_DIV 19 +#define RESET_VDI6 20 +#define RESET_GE2D 21 +#define RESET_HDMITXPHY 22 +#define RESET_VID_LOCK 23 +#define RESET_VENC0 24 +#define RESET_VDAC 25 +#define RESET_VENC2 26 +#define RESET_VENC1 27 +#define RESET_RDMA 28 +#define RESET_HDMITX 29 +#define RESET_VIU 30 +#define RESET_VENC 31 + +/* RESET1 */ +#define RESET_AUDIO 32 +#define RESET_MALI_CAPB3 33 +#define RESET_MALI 34 +#define RESET_DDR_APB 35 +#define RESET_DDR 36 +#define RESET_DOS_CAPB3 37 +#define RESET_DOS 38 +#define RESET_COMBO_DPHY_CHAN2 39 +#define RESET_DEBUG_B 40 +#define RESET_DEBUG_A 41 +#define RESET_DSP_B 42 +#define RESET_DSP_A 43 +#define RESET_PCIE_A 44 +#define RESET_PCIE_PHY 45 +#define RESET_PCIE_APB 46 +#define RESET_ANAKIN 47 +#define RESET_ETH 48 +#define RESET_EDP0_CTRL 49 +#define RESET_EDP1_CTRL 50 +#define RESET_COMBO_DPHY_CHAN0 51 +#define RESET_COMBO_DPHY_CHAN1 52 +#define RESET_DSI_LVDS_EDP_TOP 53 +#define RESET_PCIE1_PHY 54 +#define RESET_PCIE1_APB 55 +#define RESET_DDR_1 56 +/* 57 */ +#define RESET_EDP1_PIPELINE 58 +#define RESET_EDP0_PIPELINE 59 +#define RESET_MIPI_DSI1_PHY 60 +#define RESET_MIPI_DSI0_PHY 61 +#define RESET_MIPI_DSI_A_HOST 62 +#define RESET_MIPI_DSI_B_HOST 63 + +/* RESET2 */ +#define RESET_DEVICE_MMC_ARB 64 +#define RESET_IR_CTRL 65 +#define RESET_TS_A73 66 +#define RESET_TS_A53 67 +#define RESET_SPICC_2 68 +#define RESET_SPICC_3 69 +#define RESET_SPICC_4 70 +#define RESET_SPICC_5 71 +#define RESET_SMART_CARD 72 +#define RESET_SPICC_0 73 +#define RESET_SPICC_1 74 +#define RESET_RSA 75 +/* 76-79 */ +#define RESET_MSR_CLK 80 +#define RESET_SPIFC 81 +#define RESET_SAR_ADC 82 +#define RESET_BT 83 +/* 84-87 */ +#define RESET_ACODEC 88 +#define RESET_CEC 89 +#define RESET_AFIFO 90 +#define RESET_WATCHDOG 91 +/* 92-95 */ + +/* RESET3 */ +#define RESET_BRG_NIC1_GPV 96 +#define RESET_BRG_NIC2_GPV 97 +#define RESET_BRG_NIC3_GPV 98 +#define RESET_BRG_NIC4_GPV 99 +#define RESET_BRG_NIC5_GPV 100 +/* 101-121 */ +#define RESET_MIPI_ISP 122 +#define RESET_BRG_ADB_MALI_1 123 +#define RESET_BRG_ADB_MALI_0 124 +#define RESET_BRG_ADB_A73 125 +#define RESET_BRG_ADB_A53 126 +#define RESET_BRG_CCI 127 + +/* RESET4 */ +#define RESET_PWM_AO_AB 128 +#define RESET_PWM_AO_CD 129 +#define RESET_PWM_AO_EF 130 +#define RESET_PWM_AO_GH 131 +#define RESET_PWM_AB 132 +#define RESET_PWM_CD 133 +#define RESET_PWM_EF 134 +/* 135-137 */ +#define RESET_UART_A 138 +#define RESET_UART_B 139 +#define RESET_UART_C 140 +#define RESET_UART_D 141 +#define RESET_UART_E 142 +#define RESET_UART_F 143 +#define RESET_I2C_S_A 144 +#define RESET_I2C_M_A 145 +#define RESET_I2C_M_B 146 +#define RESET_I2C_M_C 147 +#define RESET_I2C_M_D 148 +#define RESET_I2C_M_E 149 +#define RESET_I2C_M_F 150 +#define RESET_I2C_M_AO_A 151 +#define RESET_SD_EMMC_A 152 +#define RESET_SD_EMMC_B 153 +#define RESET_SD_EMMC_C 154 +#define RESET_I2C_M_AO_B 155 +#define RESET_TS_GPU 156 +#define RESET_TS_NNA 157 +#define RESET_TS_VPN 158 +#define RESET_TS_HEVC 159 + +/* RESET5 */ +#define RESET_BRG_NOC_DDR_1 160 +#define RESET_BRG_NOC_DDR_0 161 +#define RESET_BRG_NOC_MAIN 162 +#define RESET_BRG_NOC_ALL 163 +/* 164-167 */ +#define RESET_BRG_NIC2_SYS 168 +#define RESET_BRG_NIC2_MAIN 169 +#define RESET_BRG_NIC2_HDMI 170 +#define RESET_BRG_NIC2_ALL 171 +#define RESET_BRG_NIC3_WAVE 172 +#define RESET_BRG_NIC3_VDEC 173 +#define RESET_BRG_NIC3_HEVCF 174 +#define RESET_BRG_NIC3_HEVCB 175 +#define RESET_BRG_NIC3_HCODEC 176 +#define RESET_BRG_NIC3_GE2D 177 +#define RESET_BRG_NIC3_GDC 178 +#define RESET_BRG_NIC3_AMLOGIC 179 +#define RESET_BRG_NIC3_MAIN 180 +#define RESET_BRG_NIC3_ALL 181 +#define RESET_BRG_NIC5_VPU 182 +/* 183-185 */ +#define RESET_BRG_NIC4_DSPB 186 +#define RESET_BRG_NIC4_DSPA 187 +#define RESET_BRG_NIC4_VAPB 188 +#define RESET_BRG_NIC4_CLK81 189 +#define RESET_BRG_NIC4_MAIN 190 +#define RESET_BRG_NIC4_ALL 191 + +/* RESET6 */ +#define RESET_BRG_VDEC_PIPEL 192 +#define RESET_BRG_HEVCF_DMC_PIPEL 193 +#define RESET_BRG_NIC2TONIC4_PIPEL 194 +#define RESET_BRG_HDMIRXTONIC2_PIPEL 195 +#define RESET_BRG_SECTONIC4_PIPEL 196 +#define RESET_BRG_VPUTONOC_PIPEL 197 +#define RESET_BRG_NIC4TONOC_PIPEL 198 +#define RESET_BRG_NIC3TONOC_PIPEL 199 +#define RESET_BRG_NIC2TONOC_PIPEL 200 +#define RESET_BRG_NNATONOC_PIPEL 201 +#define RESET_BRG_FRISP3_PIPEL 202 +#define RESET_BRG_FRISP2_PIPEL 203 +#define RESET_BRG_FRISP1_PIPEL 204 +#define RESET_BRG_FRISP0_PIPEL 205 +/* 206-217 */ +#define RESET_BRG_AMPIPE_NAND 218 +#define RESET_BRG_AMPIPE_ETH 219 +/* 220 */ +#define RESET_BRG_AM2AXI0 221 +#define RESET_BRG_AM2AXI1 222 +#define RESET_BRG_AM2AXI2 223 + +#endif /* ___DTS_AMLOGIC_T7_RESET_H */ diff --git a/arch/arm64/boot/dts/amlogic/amlogic-t7.dtsi b/arch/arm64/boot/dts/amlogic/amlogic-t7.dtsi index 5248bdf824ea..c23efc6c7ac0 100644 --- a/arch/arm64/boot/dts/amlogic/amlogic-t7.dtsi +++ b/arch/arm64/boot/dts/amlogic/amlogic-t7.dtsi @@ -5,6 +5,7 @@ #include <dt-bindings/interrupt-controller/arm-gic.h> #include <dt-bindings/power/amlogic,t7-pwrc.h> +#include "amlogic-t7-reset.h" / { interrupt-parent = <&gic>; @@ -149,6 +150,12 @@ #size-cells = <2>; ranges = <0x0 0x0 0x0 0xfe000000 0x0 0x480000>; + reset: reset-controller@2000 { + compatible = "amlogic,t7-reset"; + reg = <0x0 0x2000 0x0 0x98>; + #reset-cells = <1>; + }; + watchdog@2100 { compatible = "amlogic,t7-wdt"; reg = <0x0 0x2100 0x0 0x10>; diff --git a/arch/arm64/boot/dts/amlogic/meson-g12-common.dtsi b/arch/arm64/boot/dts/amlogic/meson-g12-common.dtsi index 9d5eab6595d0..b058ed78faf0 100644 --- a/arch/arm64/boot/dts/amlogic/meson-g12-common.dtsi +++ b/arch/arm64/boot/dts/amlogic/meson-g12-common.dtsi @@ -1663,9 +1663,28 @@ <250000000>, <0>; /* Do Nothing */ }; + + mipi_analog_dphy: phy { + compatible = "amlogic,g12a-mipi-dphy-analog"; + #phy-cells = <0>; + status = "disabled"; + }; }; }; + mipi_dphy: phy@44000 { + compatible = "amlogic,axg-mipi-dphy"; + reg = <0x0 0x44000 0x0 0x2000>; + clocks = <&clkc CLKID_MIPI_DSI_PHY>; + clock-names = "pclk"; + resets = <&reset RESET_MIPI_DSI_PHY>; + reset-names = "phy"; + phys = <&mipi_analog_dphy>; + phy-names = "analog"; + #phy-cells = <0>; + status = "disabled"; + }; + usb3_pcie_phy: phy@46000 { compatible = "amlogic,g12a-usb3-pcie-phy"; reg = <0x0 0x46000 0x0 0x2000>; @@ -2152,6 +2171,15 @@ remote-endpoint = <&hdmi_tx_in>; }; }; + + /* DPI output port */ + dpi_port: port@2 { + reg = <2>; + + dpi_out: endpoint { + remote-endpoint = <&mipi_dsi_in>; + }; + }; }; gic: interrupt-controller@ffc01000 { @@ -2189,6 +2217,48 @@ amlogic,channel-interrupts = <64 65 66 67 68 69 70 71>; }; + mipi_dsi: dsi@7000 { + compatible = "amlogic,meson-g12a-dw-mipi-dsi"; + reg = <0x0 0x7000 0x0 0x1000>; + resets = <&reset RESET_MIPI_DSI_HOST>; + reset-names = "top"; + clocks = <&clkc CLKID_MIPI_DSI_HOST>, + <&clkc CLKID_MIPI_DSI_PXCLK>, + <&clkc CLKID_CTS_ENCL>; + clock-names = "pclk", "bit", "px"; + phys = <&mipi_dphy>; + phy-names = "dphy"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + + assigned-clocks = <&clkc CLKID_MIPI_DSI_PXCLK_SEL>, + <&clkc CLKID_CTS_ENCL_SEL>, + <&clkc CLKID_VCLK2_SEL>; + assigned-clock-parents = <&clkc CLKID_GP0_PLL>, + <&clkc CLKID_VCLK2_DIV1>, + <&clkc CLKID_GP0_PLL>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + /* VPU VENC Input */ + mipi_dsi_venc_port: port@0 { + reg = <0>; + + mipi_dsi_in: endpoint { + remote-endpoint = <&dpi_out>; + }; + }; + + /* DSI Output */ + mipi_dsi_panel_port: port@1 { + reg = <1>; + }; + }; + }; + watchdog: watchdog@f0d0 { compatible = "amlogic,meson-gxbb-wdt"; reg = <0x0 0xf0d0 0x0 0x10>; diff --git a/arch/arm64/boot/dts/amlogic/meson-g12b-bananapi-cm4-mnt-reform2.dts b/arch/arm64/boot/dts/amlogic/meson-g12b-bananapi-cm4-mnt-reform2.dts new file mode 100644 index 000000000000..003efed529ba --- /dev/null +++ b/arch/arm64/boot/dts/amlogic/meson-g12b-bananapi-cm4-mnt-reform2.dts @@ -0,0 +1,384 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (c) 2023 Neil Armstrong <neil.armstrong@linaro.org> + * Copyright 2023 MNT Research GmbH + */ + +/dts-v1/; + +#include "meson-g12b-bananapi-cm4.dtsi" +#include <dt-bindings/input/input.h> +#include <dt-bindings/leds/common.h> +#include <dt-bindings/sound/meson-g12a-tohdmitx.h> + +/ { + model = "MNT Reform 2 with BPI-CM4 Module"; + compatible = "mntre,reform2-cm4", "bananapi,bpi-cm4", "amlogic,a311d", "amlogic,g12b"; + chassis-type = "laptop"; + + aliases { + ethernet0 = ðmac; + i2c0 = &i2c1; + i2c1 = &i2c3; + }; + + hdmi_connector: hdmi-connector { + compatible = "hdmi-connector"; + type = "a"; + + port { + hdmi_connector_in: endpoint { + remote-endpoint = <&hdmi_tx_tmds_out>; + }; + }; + }; + + leds { + compatible = "gpio-leds"; + + led-blue { + color = <LED_COLOR_ID_BLUE>; + function = LED_FUNCTION_STATUS; + gpios = <&gpio_ao GPIOAO_7 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "heartbeat"; + }; + + led-green { + color = <LED_COLOR_ID_GREEN>; + function = LED_FUNCTION_STATUS; + gpios = <&gpio_ao GPIOAO_2 GPIO_ACTIVE_HIGH>; + }; + }; + + sound { + compatible = "amlogic,axg-sound-card"; + model = "MNT-REFORM2-BPI-CM4"; + audio-widgets = "Headphone", "Headphone Jack", + "Speaker", "External Speaker", + "Microphone", "Mic Jack"; + audio-aux-devs = <&tdmout_a>, <&tdmout_b>, <&tdmin_b>; + audio-routing = "TDMOUT_A IN 0", "FRDDR_A OUT 0", + "TDMOUT_A IN 1", "FRDDR_B OUT 0", + "TDMOUT_A IN 2", "FRDDR_C OUT 0", + "TDM_A Playback", "TDMOUT_A OUT", + "TDMOUT_B IN 0", "FRDDR_A OUT 1", + "TDMOUT_B IN 1", "FRDDR_B OUT 1", + "TDMOUT_B IN 2", "FRDDR_C OUT 1", + "TDM_B Playback", "TDMOUT_B OUT", + "TDMIN_B IN 1", "TDM_B Capture", + "TDMIN_B IN 4", "TDM_B Loopback", + "TODDR_A IN 1", "TDMIN_B OUT", + "TODDR_B IN 1", "TDMIN_B OUT", + "TODDR_C IN 1", "TDMIN_B OUT", + "Headphone Jack", "HP_L", + "Headphone Jack", "HP_R", + "External Speaker", "SPK_LP", + "External Speaker", "SPK_LN", + "External Speaker", "SPK_RP", + "External Speaker", "SPK_RN", + "LINPUT1", "Mic Jack", + "Mic Jack", "MICB"; + + assigned-clocks = <&clkc CLKID_MPLL2>, + <&clkc CLKID_MPLL0>, + <&clkc CLKID_MPLL1>; + assigned-clock-parents = <0>, <0>, <0>; + assigned-clock-rates = <294912000>, + <270950400>, + <393216000>; + + dai-link-0 { + sound-dai = <&frddr_a>; + }; + + dai-link-1 { + sound-dai = <&frddr_b>; + }; + + dai-link-2 { + sound-dai = <&frddr_c>; + }; + + dai-link-3 { + sound-dai = <&toddr_a>; + }; + + dai-link-4 { + sound-dai = <&toddr_b>; + }; + + dai-link-5 { + sound-dai = <&toddr_c>; + }; + + /* 8ch hdmi interface */ + dai-link-6 { + sound-dai = <&tdmif_a>; + dai-format = "i2s"; + dai-tdm-slot-tx-mask-0 = <1 1>; + dai-tdm-slot-tx-mask-1 = <1 1>; + dai-tdm-slot-tx-mask-2 = <1 1>; + dai-tdm-slot-tx-mask-3 = <1 1>; + mclk-fs = <256>; + + codec { + sound-dai = <&tohdmitx TOHDMITX_I2S_IN_A>; + }; + }; + + /* Analog Audio */ + dai-link-7 { + sound-dai = <&tdmif_b>; + dai-format = "i2s"; + dai-tdm-slot-tx-mask-0 = <1 1>; + mclk-fs = <256>; + + codec { + sound-dai = <&wm8960>; + }; + }; + + /* hdmi glue */ + dai-link-8 { + sound-dai = <&tohdmitx TOHDMITX_I2S_OUT>; + + codec { + sound-dai = <&hdmi_tx>; + }; + }; + }; + + reg_main_1v8: regulator-main-1v8 { + compatible = "regulator-fixed"; + regulator-name = "1V8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + vin-supply = <®_main_3v3>; + }; + + reg_main_1v2: regulator-main-1v2 { + compatible = "regulator-fixed"; + regulator-name = "1V2"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + vin-supply = <®_main_5v>; + }; + + reg_main_3v3: regulator-main-3v3 { + compatible = "regulator-fixed"; + regulator-name = "3V3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + + reg_main_5v: regulator-main-5v { + compatible = "regulator-fixed"; + regulator-name = "5V"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + }; + + reg_main_usb: regulator-main-usb { + compatible = "regulator-fixed"; + regulator-name = "USB_PWR"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + vin-supply = <®_main_5v>; + }; + + backlight: backlight { + compatible = "pwm-backlight"; + pwms = <&pwm_AO_ab 0 10000 0>; + power-supply = <®_main_usb>; + enable-gpios = <&gpio 58 GPIO_ACTIVE_HIGH>; + brightness-levels = <0 32 64 128 160 200 255>; + default-brightness-level = <6>; + }; + + panel { + compatible = "innolux,n125hce-gn1"; + power-supply = <®_main_3v3>; + backlight = <&backlight>; + no-hpd; + + port { + panel_in: endpoint { + remote-endpoint = <&edp_bridge_out>; + }; + }; + }; + + clock_12288: clock_12288 { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <12288000>; + }; +}; + +&mipi_analog_dphy { + status = "okay"; +}; + +&mipi_dphy { + status = "okay"; +}; + +&mipi_dsi { + status = "okay"; + + assigned-clocks = <&clkc CLKID_GP0_PLL>, + <&clkc CLKID_MIPI_DSI_PXCLK_SEL>, + <&clkc CLKID_MIPI_DSI_PXCLK>, + <&clkc CLKID_CTS_ENCL_SEL>, + <&clkc CLKID_VCLK2_SEL>; + assigned-clock-parents = <0>, + <&clkc CLKID_GP0_PLL>, + <0>, + <&clkc CLKID_VCLK2_DIV1>, + <&clkc CLKID_GP0_PLL>; + assigned-clock-rates = <936000000>, + <0>, + <936000000>, + <0>, + <0>; +}; + +&mipi_dsi_panel_port { + mipi_dsi_out: endpoint { + remote-endpoint = <&edp_bridge_in>; + }; +}; + +&cecb_AO { + status = "okay"; +}; + +ðmac { + status = "okay"; +}; + +&hdmi_tx { + status = "okay"; +}; + +&hdmi_tx_tmds_port { + hdmi_tx_tmds_out: endpoint { + remote-endpoint = <&hdmi_connector_in>; + }; +}; + +&pwm_AO_ab { + pinctrl-names = "default"; + pinctrl-0 = <&pwm_ao_a_pins>; + status = "okay"; +}; + +&i2c0 { + status = "okay"; +}; + +&i2c3 { + status = "okay"; + + edp_bridge: bridge@2c { + compatible = "ti,sn65dsi86"; + reg = <0x2c>; + enable-gpios = <&gpio GPIOX_10 GPIO_ACTIVE_HIGH>; // PIN_24 / GPIO8 + vccio-supply = <®_main_1v8>; + vpll-supply = <®_main_1v8>; + vcca-supply = <®_main_1v2>; + vcc-supply = <®_main_1v2>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + edp_bridge_in: endpoint { + remote-endpoint = <&mipi_dsi_out>; + }; + }; + + port@1 { + reg = <1>; + + edp_bridge_out: endpoint { + remote-endpoint = <&panel_in>; + }; + }; + }; + }; +}; + +&i2c2 { + status = "okay"; + + wm8960: codec@1a { + compatible = "wlf,wm8960"; + reg = <0x1a>; + clocks = <&clock_12288>; + clock-names = "mclk"; + #sound-dai-cells = <0>; + wlf,shared-lrclk; + }; + + rtc@68 { + compatible = "nxp,pcf8523"; + reg = <0x68>; + }; +}; + +&pcie { + status = "okay"; +}; + +&sd_emmc_b { + status = "okay"; +}; + +&tdmif_a { + status = "okay"; +}; + +&tdmout_a { + status = "okay"; +}; + +&tdmif_b { + pinctrl-0 = <&tdm_b_dout0_pins>, <&tdm_b_fs_pins>, <&tdm_b_sclk_pins>, <&tdm_b_din1_pins>; + pinctrl-names = "default"; + + assigned-clocks = <&clkc_audio AUD_CLKID_TDM_SCLK_PAD1>, + <&clkc_audio AUD_CLKID_TDM_LRCLK_PAD1>; + assigned-clock-parents = <&clkc_audio AUD_CLKID_MST_B_SCLK>, + <&clkc_audio AUD_CLKID_MST_B_LRCLK>; + assigned-clock-rates = <0>, <0>; +}; + +&tdmin_b { + status = "okay"; +}; + +&toddr_a { + status = "okay"; +}; + +&toddr_b { + status = "okay"; +}; + +&toddr_c { + status = "okay"; +}; + +&tohdmitx { + status = "okay"; +}; + +&usb { + dr_mode = "host"; + + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/amlogic/meson-khadas-vim3-ts050.dtso b/arch/arm64/boot/dts/amlogic/meson-khadas-vim3-ts050.dtso new file mode 100644 index 000000000000..a41b4e619580 --- /dev/null +++ b/arch/arm64/boot/dts/amlogic/meson-khadas-vim3-ts050.dtso @@ -0,0 +1,108 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (c) 2019 BayLibre, SAS + * Author: Neil Armstrong <narmstrong@baylibre.com> + */ + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/clock/g12a-clkc.h> +#include <dt-bindings/interrupt-controller/irq.h> +#include <dt-bindings/interrupt-controller/arm-gic.h> +#include <dt-bindings/interrupt-controller/amlogic,meson-g12a-gpio-intc.h> + +/dts-v1/; +/plugin/; + +/* + * Enable Khadas TS050 DSI Panel + Touch Controller + * on Khadas VIM3 (A311D) and VIM3L (S905D3) + */ + +&{/} { + panel_backlight: backlight { + compatible = "pwm-backlight"; + pwms = <&pwm_AO_cd 0 25000 0>; + brightness-levels = <0 255>; + num-interpolated-steps = <255>; + default-brightness-level = <200>; + }; +}; + +&i2c3 { + #address-cells = <1>; + #size-cells = <0>; + pinctrl-0 = <&i2c3_sda_a_pins>, <&i2c3_sck_a_pins>; + pinctrl-names = "default"; + status = "okay"; + + touch-controller@38 { + compatible = "edt,edt-ft5206"; + reg = <0x38>; + interrupt-parent = <&gpio_intc>; + interrupts = <IRQID_GPIOA_5 IRQ_TYPE_EDGE_FALLING>; + reset-gpios = <&gpio_expander 6 GPIO_ACTIVE_LOW>; + touchscreen-size-x = <1080>; + touchscreen-size-y = <1920>; + status = "okay"; + }; +}; + +&mipi_dsi { + #address-cells = <1>; + #size-cells = <0>; + status = "okay"; + + assigned-clocks = <&clkc CLKID_GP0_PLL>, + <&clkc CLKID_MIPI_DSI_PXCLK_SEL>, + <&clkc CLKID_MIPI_DSI_PXCLK>, + <&clkc CLKID_CTS_ENCL_SEL>, + <&clkc CLKID_VCLK2_SEL>; + assigned-clock-parents = <0>, + <&clkc CLKID_GP0_PLL>, + <0>, + <&clkc CLKID_VCLK2_DIV1>, + <&clkc CLKID_GP0_PLL>; + assigned-clock-rates = <960000000>, + <0>, + <960000000>, + <0>, + <0>; + + panel@0 { + compatible = "khadas,ts050"; + reset-gpios = <&gpio_expander 0 GPIO_ACTIVE_LOW>; + enable-gpios = <&gpio_expander 1 GPIO_ACTIVE_HIGH>; + power-supply = <&vcc_3v3>; + backlight = <&panel_backlight>; + reg = <0>; + + port { + mipi_in_panel: endpoint { + remote-endpoint = <&mipi_out_panel>; + }; + }; + }; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@1 { + mipi_out_panel: endpoint { + remote-endpoint = <&mipi_in_panel>; + }; + }; + }; +}; + +&mipi_analog_dphy { + status = "okay"; +}; + +&mipi_dphy { + status = "okay"; +}; + +&pwm_AO_cd { + pinctrl-0 = <&pwm_ao_c_6_pins>, <&pwm_ao_d_e_pins>; +}; diff --git a/arch/arm64/boot/dts/amlogic/meson-s4.dtsi b/arch/arm64/boot/dts/amlogic/meson-s4.dtsi index ce90b35686a2..10896f9df682 100644 --- a/arch/arm64/boot/dts/amlogic/meson-s4.dtsi +++ b/arch/arm64/boot/dts/amlogic/meson-s4.dtsi @@ -65,10 +65,15 @@ #clock-cells = <0>; }; - pwrc: power-controller { - compatible = "amlogic,meson-s4-pwrc"; - #power-domain-cells = <1>; - status = "okay"; + firmware { + sm: secure-monitor { + compatible = "amlogic,meson-gxbb-sm"; + + pwrc: power-controller { + compatible = "amlogic,meson-s4-pwrc"; + #power-domain-cells = <1>; + }; + }; }; soc { diff --git a/arch/riscv/boot/dts/microchip/mpfs-icicle-kit.dts b/arch/riscv/boot/dts/microchip/mpfs-icicle-kit.dts index 222a39d90f85..f80df225f72b 100644 --- a/arch/riscv/boot/dts/microchip/mpfs-icicle-kit.dts +++ b/arch/riscv/boot/dts/microchip/mpfs-icicle-kit.dts @@ -100,6 +100,38 @@ &i2c1 { status = "okay"; + + power-monitor@10 { + compatible = "microchip,pac1934"; + reg = <0x10>; + + #address-cells = <1>; + #size-cells = <0>; + + channel@1 { + reg = <0x1>; + shunt-resistor-micro-ohms = <10000>; + label = "VDDREG"; + }; + + channel@2 { + reg = <0x2>; + shunt-resistor-micro-ohms = <10000>; + label = "VDDA25"; + }; + + channel@3 { + reg = <0x3>; + shunt-resistor-micro-ohms = <10000>; + label = "VDD25"; + }; + + channel@4 { + reg = <0x4>; + shunt-resistor-micro-ohms = <10000>; + label = "VDDA_REG"; + }; + }; }; &i2c2 { diff --git a/arch/riscv/boot/dts/starfive/Makefile b/arch/riscv/boot/dts/starfive/Makefile index 0141504c0f5c..2fa0cd7f31c3 100644 --- a/arch/riscv/boot/dts/starfive/Makefile +++ b/arch/riscv/boot/dts/starfive/Makefile @@ -8,5 +8,6 @@ DTC_FLAGS_jh7110-starfive-visionfive-2-v1.3b := -@ dtb-$(CONFIG_ARCH_STARFIVE) += jh7100-beaglev-starlight.dtb dtb-$(CONFIG_ARCH_STARFIVE) += jh7100-starfive-visionfive-v1.dtb +dtb-$(CONFIG_ARCH_STARFIVE) += jh7110-milkv-mars.dtb dtb-$(CONFIG_ARCH_STARFIVE) += jh7110-starfive-visionfive-2-v1.2a.dtb dtb-$(CONFIG_ARCH_STARFIVE) += jh7110-starfive-visionfive-2-v1.3b.dtb diff --git a/arch/riscv/boot/dts/starfive/jh7100.dtsi b/arch/riscv/boot/dts/starfive/jh7100.dtsi index 9a2e9583af88..7de0732b8eab 100644 --- a/arch/riscv/boot/dts/starfive/jh7100.dtsi +++ b/arch/riscv/boot/dts/starfive/jh7100.dtsi @@ -13,7 +13,7 @@ #address-cells = <2>; #size-cells = <2>; - cpus { + cpus: cpus { #address-cells = <1>; #size-cells = <0>; diff --git a/arch/riscv/boot/dts/starfive/jh7110-common.dtsi b/arch/riscv/boot/dts/starfive/jh7110-common.dtsi new file mode 100644 index 000000000000..8ff6ea64f048 --- /dev/null +++ b/arch/riscv/boot/dts/starfive/jh7110-common.dtsi @@ -0,0 +1,599 @@ +// SPDX-License-Identifier: GPL-2.0 OR MIT +/* + * Copyright (C) 2022 StarFive Technology Co., Ltd. + * Copyright (C) 2022 Emil Renner Berthing <kernel@esmil.dk> + */ + +/dts-v1/; +#include "jh7110.dtsi" +#include "jh7110-pinfunc.h" +#include <dt-bindings/gpio/gpio.h> + +/ { + aliases { + ethernet0 = &gmac0; + i2c0 = &i2c0; + i2c2 = &i2c2; + i2c5 = &i2c5; + i2c6 = &i2c6; + mmc0 = &mmc0; + mmc1 = &mmc1; + serial0 = &uart0; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + memory@40000000 { + device_type = "memory"; + reg = <0x0 0x40000000 0x1 0x0>; + }; + + gpio-restart { + compatible = "gpio-restart"; + gpios = <&sysgpio 35 GPIO_ACTIVE_HIGH>; + priority = <224>; + }; + + pwmdac_codec: audio-codec { + compatible = "linux,spdif-dit"; + #sound-dai-cells = <0>; + }; + + sound { + compatible = "simple-audio-card"; + simple-audio-card,name = "StarFive-PWMDAC-Sound-Card"; + #address-cells = <1>; + #size-cells = <0>; + + simple-audio-card,dai-link@0 { + reg = <0>; + format = "left_j"; + bitclock-master = <&sndcpu0>; + frame-master = <&sndcpu0>; + + sndcpu0: cpu { + sound-dai = <&pwmdac>; + }; + + codec { + sound-dai = <&pwmdac_codec>; + }; + }; + }; +}; + +&cpus { + timebase-frequency = <4000000>; +}; + +&dvp_clk { + clock-frequency = <74250000>; +}; + +&gmac0_rgmii_rxin { + clock-frequency = <125000000>; +}; + +&gmac0_rmii_refin { + clock-frequency = <50000000>; +}; + +&gmac1_rgmii_rxin { + clock-frequency = <125000000>; +}; + +&gmac1_rmii_refin { + clock-frequency = <50000000>; +}; + +&hdmitx0_pixelclk { + clock-frequency = <297000000>; +}; + +&i2srx_bclk_ext { + clock-frequency = <12288000>; +}; + +&i2srx_lrck_ext { + clock-frequency = <192000>; +}; + +&i2stx_bclk_ext { + clock-frequency = <12288000>; +}; + +&i2stx_lrck_ext { + clock-frequency = <192000>; +}; + +&mclk_ext { + clock-frequency = <12288000>; +}; + +&osc { + clock-frequency = <24000000>; +}; + +&rtc_osc { + clock-frequency = <32768>; +}; + +&tdm_ext { + clock-frequency = <49152000>; +}; + +&camss { + assigned-clocks = <&ispcrg JH7110_ISPCLK_DOM4_APB_FUNC>, + <&ispcrg JH7110_ISPCLK_MIPI_RX0_PXL>; + assigned-clock-rates = <49500000>, <198000000>; + status = "okay"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + }; + + port@1 { + reg = <1>; + + camss_from_csi2rx: endpoint { + remote-endpoint = <&csi2rx_to_camss>; + }; + }; + }; +}; + +&csi2rx { + assigned-clocks = <&ispcrg JH7110_ISPCLK_VIN_SYS>; + assigned-clock-rates = <297000000>; + status = "okay"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + /* remote MIPI sensor endpoint */ + }; + + port@1 { + reg = <1>; + + csi2rx_to_camss: endpoint { + remote-endpoint = <&camss_from_csi2rx>; + }; + }; + }; +}; + +&gmac0 { + phy-handle = <&phy0>; + phy-mode = "rgmii-id"; + status = "okay"; + + mdio { + #address-cells = <1>; + #size-cells = <0>; + compatible = "snps,dwmac-mdio"; + + phy0: ethernet-phy@0 { + reg = <0>; + }; + }; +}; + +&i2c0 { + clock-frequency = <100000>; + i2c-sda-hold-time-ns = <300>; + i2c-sda-falling-time-ns = <510>; + i2c-scl-falling-time-ns = <510>; + pinctrl-names = "default"; + pinctrl-0 = <&i2c0_pins>; + status = "okay"; +}; + +&i2c2 { + clock-frequency = <100000>; + i2c-sda-hold-time-ns = <300>; + i2c-sda-falling-time-ns = <510>; + i2c-scl-falling-time-ns = <510>; + pinctrl-names = "default"; + pinctrl-0 = <&i2c2_pins>; + status = "okay"; +}; + +&i2c5 { + clock-frequency = <100000>; + i2c-sda-hold-time-ns = <300>; + i2c-sda-falling-time-ns = <510>; + i2c-scl-falling-time-ns = <510>; + pinctrl-names = "default"; + pinctrl-0 = <&i2c5_pins>; + status = "okay"; + + axp15060: pmic@36 { + compatible = "x-powers,axp15060"; + reg = <0x36>; + interrupt-controller; + #interrupt-cells = <1>; + + regulators { + vcc_3v3: dcdc1 { + regulator-boot-on; + regulator-always-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-name = "vcc_3v3"; + }; + + vdd_cpu: dcdc2 { + regulator-always-on; + regulator-min-microvolt = <500000>; + regulator-max-microvolt = <1540000>; + regulator-name = "vdd-cpu"; + }; + + emmc_vdd: aldo4 { + regulator-boot-on; + regulator-always-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-name = "emmc_vdd"; + }; + }; + }; +}; + +&i2c6 { + clock-frequency = <100000>; + i2c-sda-hold-time-ns = <300>; + i2c-sda-falling-time-ns = <510>; + i2c-scl-falling-time-ns = <510>; + pinctrl-names = "default"; + pinctrl-0 = <&i2c6_pins>; + status = "okay"; +}; + +&mmc0 { + max-frequency = <100000000>; + assigned-clocks = <&syscrg JH7110_SYSCLK_SDIO0_SDCARD>; + assigned-clock-rates = <50000000>; + bus-width = <8>; + cap-mmc-highspeed; + mmc-ddr-1_8v; + mmc-hs200-1_8v; + cap-mmc-hw-reset; + post-power-on-delay-ms = <200>; + pinctrl-names = "default"; + pinctrl-0 = <&mmc0_pins>; + vmmc-supply = <&vcc_3v3>; + vqmmc-supply = <&emmc_vdd>; + status = "okay"; +}; + +&mmc1 { + max-frequency = <100000000>; + assigned-clocks = <&syscrg JH7110_SYSCLK_SDIO1_SDCARD>; + assigned-clock-rates = <50000000>; + bus-width = <4>; + no-sdio; + no-mmc; + cd-gpios = <&sysgpio 41 GPIO_ACTIVE_LOW>; + disable-wp; + cap-sd-highspeed; + post-power-on-delay-ms = <200>; + pinctrl-names = "default"; + pinctrl-0 = <&mmc1_pins>; + status = "okay"; +}; + +&pwmdac { + pinctrl-names = "default"; + pinctrl-0 = <&pwmdac_pins>; + status = "okay"; +}; + +&qspi { + #address-cells = <1>; + #size-cells = <0>; + status = "okay"; + + nor_flash: flash@0 { + compatible = "jedec,spi-nor"; + reg = <0>; + cdns,read-delay = <5>; + spi-max-frequency = <12000000>; + cdns,tshsl-ns = <1>; + cdns,tsd2d-ns = <1>; + cdns,tchsh-ns = <1>; + cdns,tslch-ns = <1>; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + spl@0 { + reg = <0x0 0x80000>; + }; + uboot-env@f0000 { + reg = <0xf0000 0x10000>; + }; + uboot@100000 { + reg = <0x100000 0x400000>; + }; + reserved-data@600000 { + reg = <0x600000 0xa00000>; + }; + }; + }; +}; + +&pwm { + pinctrl-names = "default"; + pinctrl-0 = <&pwm_pins>; + status = "okay"; +}; + +&spi0 { + pinctrl-names = "default"; + pinctrl-0 = <&spi0_pins>; + status = "okay"; + + spi_dev0: spi@0 { + compatible = "rohm,dh2228fv"; + reg = <0>; + spi-max-frequency = <10000000>; + }; +}; + +&sysgpio { + i2c0_pins: i2c0-0 { + i2c-pins { + pinmux = <GPIOMUX(57, GPOUT_LOW, + GPOEN_SYS_I2C0_CLK, + GPI_SYS_I2C0_CLK)>, + <GPIOMUX(58, GPOUT_LOW, + GPOEN_SYS_I2C0_DATA, + GPI_SYS_I2C0_DATA)>; + bias-disable; /* external pull-up */ + input-enable; + input-schmitt-enable; + }; + }; + + i2c2_pins: i2c2-0 { + i2c-pins { + pinmux = <GPIOMUX(3, GPOUT_LOW, + GPOEN_SYS_I2C2_CLK, + GPI_SYS_I2C2_CLK)>, + <GPIOMUX(2, GPOUT_LOW, + GPOEN_SYS_I2C2_DATA, + GPI_SYS_I2C2_DATA)>; + bias-disable; /* external pull-up */ + input-enable; + input-schmitt-enable; + }; + }; + + i2c5_pins: i2c5-0 { + i2c-pins { + pinmux = <GPIOMUX(19, GPOUT_LOW, + GPOEN_SYS_I2C5_CLK, + GPI_SYS_I2C5_CLK)>, + <GPIOMUX(20, GPOUT_LOW, + GPOEN_SYS_I2C5_DATA, + GPI_SYS_I2C5_DATA)>; + bias-disable; /* external pull-up */ + input-enable; + input-schmitt-enable; + }; + }; + + i2c6_pins: i2c6-0 { + i2c-pins { + pinmux = <GPIOMUX(16, GPOUT_LOW, + GPOEN_SYS_I2C6_CLK, + GPI_SYS_I2C6_CLK)>, + <GPIOMUX(17, GPOUT_LOW, + GPOEN_SYS_I2C6_DATA, + GPI_SYS_I2C6_DATA)>; + bias-disable; /* external pull-up */ + input-enable; + input-schmitt-enable; + }; + }; + + mmc0_pins: mmc0-0 { + rst-pins { + pinmux = <GPIOMUX(62, GPOUT_SYS_SDIO0_RST, + GPOEN_ENABLE, + GPI_NONE)>; + bias-pull-up; + drive-strength = <12>; + input-disable; + input-schmitt-disable; + slew-rate = <0>; + }; + + mmc-pins { + pinmux = <PINMUX(64, 0)>, + <PINMUX(65, 0)>, + <PINMUX(66, 0)>, + <PINMUX(67, 0)>, + <PINMUX(68, 0)>, + <PINMUX(69, 0)>, + <PINMUX(70, 0)>, + <PINMUX(71, 0)>, + <PINMUX(72, 0)>, + <PINMUX(73, 0)>; + bias-pull-up; + drive-strength = <12>; + input-enable; + }; + }; + + mmc1_pins: mmc1-0 { + clk-pins { + pinmux = <GPIOMUX(10, GPOUT_SYS_SDIO1_CLK, + GPOEN_ENABLE, + GPI_NONE)>; + bias-pull-up; + drive-strength = <12>; + input-disable; + input-schmitt-disable; + slew-rate = <0>; + }; + + mmc-pins { + pinmux = <GPIOMUX(9, GPOUT_SYS_SDIO1_CMD, + GPOEN_SYS_SDIO1_CMD, + GPI_SYS_SDIO1_CMD)>, + <GPIOMUX(11, GPOUT_SYS_SDIO1_DATA0, + GPOEN_SYS_SDIO1_DATA0, + GPI_SYS_SDIO1_DATA0)>, + <GPIOMUX(12, GPOUT_SYS_SDIO1_DATA1, + GPOEN_SYS_SDIO1_DATA1, + GPI_SYS_SDIO1_DATA1)>, + <GPIOMUX(7, GPOUT_SYS_SDIO1_DATA2, + GPOEN_SYS_SDIO1_DATA2, + GPI_SYS_SDIO1_DATA2)>, + <GPIOMUX(8, GPOUT_SYS_SDIO1_DATA3, + GPOEN_SYS_SDIO1_DATA3, + GPI_SYS_SDIO1_DATA3)>; + bias-pull-up; + drive-strength = <12>; + input-enable; + input-schmitt-enable; + slew-rate = <0>; + }; + }; + + pwmdac_pins: pwmdac-0 { + pwmdac-pins { + pinmux = <GPIOMUX(33, GPOUT_SYS_PWMDAC_LEFT, + GPOEN_ENABLE, + GPI_NONE)>, + <GPIOMUX(34, GPOUT_SYS_PWMDAC_RIGHT, + GPOEN_ENABLE, + GPI_NONE)>; + bias-disable; + drive-strength = <2>; + input-disable; + input-schmitt-disable; + slew-rate = <0>; + }; + }; + + pwm_pins: pwm-0 { + pwm-pins { + pinmux = <GPIOMUX(46, GPOUT_SYS_PWM_CHANNEL0, + GPOEN_SYS_PWM0_CHANNEL0, + GPI_NONE)>, + <GPIOMUX(59, GPOUT_SYS_PWM_CHANNEL1, + GPOEN_SYS_PWM0_CHANNEL1, + GPI_NONE)>; + bias-disable; + drive-strength = <12>; + input-disable; + input-schmitt-disable; + slew-rate = <0>; + }; + }; + + spi0_pins: spi0-0 { + mosi-pins { + pinmux = <GPIOMUX(52, GPOUT_SYS_SPI0_TXD, + GPOEN_ENABLE, + GPI_NONE)>; + bias-disable; + input-disable; + input-schmitt-disable; + }; + + miso-pins { + pinmux = <GPIOMUX(53, GPOUT_LOW, + GPOEN_DISABLE, + GPI_SYS_SPI0_RXD)>; + bias-pull-up; + input-enable; + input-schmitt-enable; + }; + + sck-pins { + pinmux = <GPIOMUX(48, GPOUT_SYS_SPI0_CLK, + GPOEN_ENABLE, + GPI_SYS_SPI0_CLK)>; + bias-disable; + input-disable; + input-schmitt-disable; + }; + + ss-pins { + pinmux = <GPIOMUX(49, GPOUT_SYS_SPI0_FSS, + GPOEN_ENABLE, + GPI_SYS_SPI0_FSS)>; + bias-disable; + input-disable; + input-schmitt-disable; + }; + }; + + uart0_pins: uart0-0 { + tx-pins { + pinmux = <GPIOMUX(5, GPOUT_SYS_UART0_TX, + GPOEN_ENABLE, + GPI_NONE)>; + bias-disable; + drive-strength = <12>; + input-disable; + input-schmitt-disable; + slew-rate = <0>; + }; + + rx-pins { + pinmux = <GPIOMUX(6, GPOUT_LOW, + GPOEN_DISABLE, + GPI_SYS_UART0_RX)>; + bias-disable; /* external pull-up */ + drive-strength = <2>; + input-enable; + input-schmitt-enable; + slew-rate = <0>; + }; + }; +}; + +&uart0 { + pinctrl-names = "default"; + pinctrl-0 = <&uart0_pins>; + status = "okay"; +}; + +&usb0 { + dr_mode = "peripheral"; + status = "okay"; +}; + +&U74_1 { + cpu-supply = <&vdd_cpu>; +}; + +&U74_2 { + cpu-supply = <&vdd_cpu>; +}; + +&U74_3 { + cpu-supply = <&vdd_cpu>; +}; + +&U74_4 { + cpu-supply = <&vdd_cpu>; +}; diff --git a/arch/riscv/boot/dts/starfive/jh7110-milkv-mars.dts b/arch/riscv/boot/dts/starfive/jh7110-milkv-mars.dts new file mode 100644 index 000000000000..fa0eac78e0ba --- /dev/null +++ b/arch/riscv/boot/dts/starfive/jh7110-milkv-mars.dts @@ -0,0 +1,30 @@ +// SPDX-License-Identifier: GPL-2.0 OR MIT +/* + * Copyright (C) 2023 Jisheng Zhang <jszhang@kernel.org> + */ + +/dts-v1/; +#include "jh7110-common.dtsi" + +/ { + model = "Milk-V Mars"; + compatible = "milkv,mars", "starfive,jh7110"; +}; + +&gmac0 { + starfive,tx-use-rgmii-clk; + assigned-clocks = <&aoncrg JH7110_AONCLK_GMAC0_TX>; + assigned-clock-parents = <&aoncrg JH7110_AONCLK_GMAC0_RMII_RTX>; +}; + + +&phy0 { + motorcomm,tx-clk-adj-enabled; + motorcomm,tx-clk-10-inverted; + motorcomm,tx-clk-100-inverted; + motorcomm,tx-clk-1000-inverted; + motorcomm,rx-clk-drv-microamp = <3970>; + motorcomm,rx-data-drv-microamp = <2910>; + rx-internal-delay-ps = <1500>; + tx-internal-delay-ps = <1500>; +}; diff --git a/arch/riscv/boot/dts/starfive/jh7110-starfive-visionfive-2.dtsi b/arch/riscv/boot/dts/starfive/jh7110-starfive-visionfive-2.dtsi index 45b58b6f3df8..9d70f21c86fc 100644 --- a/arch/riscv/boot/dts/starfive/jh7110-starfive-visionfive-2.dtsi +++ b/arch/riscv/boot/dts/starfive/jh7110-starfive-visionfive-2.dtsi @@ -5,188 +5,11 @@ */ /dts-v1/; -#include "jh7110.dtsi" -#include "jh7110-pinfunc.h" -#include <dt-bindings/gpio/gpio.h> +#include "jh7110-common.dtsi" / { aliases { - ethernet0 = &gmac0; ethernet1 = &gmac1; - i2c0 = &i2c0; - i2c2 = &i2c2; - i2c5 = &i2c5; - i2c6 = &i2c6; - mmc0 = &mmc0; - mmc1 = &mmc1; - serial0 = &uart0; - }; - - chosen { - stdout-path = "serial0:115200n8"; - }; - - cpus { - timebase-frequency = <4000000>; - }; - - memory@40000000 { - device_type = "memory"; - reg = <0x0 0x40000000 0x1 0x0>; - }; - - gpio-restart { - compatible = "gpio-restart"; - gpios = <&sysgpio 35 GPIO_ACTIVE_HIGH>; - priority = <224>; - }; - - pwmdac_codec: pwmdac-codec { - compatible = "linux,spdif-dit"; - #sound-dai-cells = <0>; - }; - - sound-pwmdac { - compatible = "simple-audio-card"; - simple-audio-card,name = "StarFive-PWMDAC-Sound-Card"; - #address-cells = <1>; - #size-cells = <0>; - - simple-audio-card,dai-link@0 { - reg = <0>; - format = "left_j"; - bitclock-master = <&sndcpu0>; - frame-master = <&sndcpu0>; - - sndcpu0: cpu { - sound-dai = <&pwmdac>; - }; - - codec { - sound-dai = <&pwmdac_codec>; - }; - }; - }; -}; - -&dvp_clk { - clock-frequency = <74250000>; -}; - -&gmac0_rgmii_rxin { - clock-frequency = <125000000>; -}; - -&gmac0_rmii_refin { - clock-frequency = <50000000>; -}; - -&gmac1_rgmii_rxin { - clock-frequency = <125000000>; -}; - -&gmac1_rmii_refin { - clock-frequency = <50000000>; -}; - -&hdmitx0_pixelclk { - clock-frequency = <297000000>; -}; - -&i2srx_bclk_ext { - clock-frequency = <12288000>; -}; - -&i2srx_lrck_ext { - clock-frequency = <192000>; -}; - -&i2stx_bclk_ext { - clock-frequency = <12288000>; -}; - -&i2stx_lrck_ext { - clock-frequency = <192000>; -}; - -&mclk_ext { - clock-frequency = <12288000>; -}; - -&osc { - clock-frequency = <24000000>; -}; - -&rtc_osc { - clock-frequency = <32768>; -}; - -&tdm_ext { - clock-frequency = <49152000>; -}; - -&camss { - assigned-clocks = <&ispcrg JH7110_ISPCLK_DOM4_APB_FUNC>, - <&ispcrg JH7110_ISPCLK_MIPI_RX0_PXL>; - assigned-clock-rates = <49500000>, <198000000>; - status = "okay"; - - ports { - #address-cells = <1>; - #size-cells = <0>; - - port@0 { - reg = <0>; - }; - - port@1 { - reg = <1>; - - camss_from_csi2rx: endpoint { - remote-endpoint = <&csi2rx_to_camss>; - }; - }; - }; -}; - -&csi2rx { - assigned-clocks = <&ispcrg JH7110_ISPCLK_VIN_SYS>; - assigned-clock-rates = <297000000>; - status = "okay"; - - ports { - #address-cells = <1>; - #size-cells = <0>; - - port@0 { - reg = <0>; - - /* remote MIPI sensor endpoint */ - }; - - port@1 { - reg = <1>; - - csi2rx_to_camss: endpoint { - remote-endpoint = <&camss_from_csi2rx>; - }; - }; - }; -}; - -&gmac0 { - phy-handle = <&phy0>; - phy-mode = "rgmii-id"; - status = "okay"; - - mdio { - #address-cells = <1>; - #size-cells = <0>; - compatible = "snps,dwmac-mdio"; - - phy0: ethernet-phy@0 { - reg = <0>; - }; }; }; @@ -206,510 +29,6 @@ }; }; -&i2c0 { - clock-frequency = <100000>; - i2c-sda-hold-time-ns = <300>; - i2c-sda-falling-time-ns = <510>; - i2c-scl-falling-time-ns = <510>; - pinctrl-names = "default"; - pinctrl-0 = <&i2c0_pins>; - status = "okay"; -}; - -&i2c2 { - clock-frequency = <100000>; - i2c-sda-hold-time-ns = <300>; - i2c-sda-falling-time-ns = <510>; - i2c-scl-falling-time-ns = <510>; - pinctrl-names = "default"; - pinctrl-0 = <&i2c2_pins>; - status = "okay"; -}; - -&i2c5 { - clock-frequency = <100000>; - i2c-sda-hold-time-ns = <300>; - i2c-sda-falling-time-ns = <510>; - i2c-scl-falling-time-ns = <510>; - pinctrl-names = "default"; - pinctrl-0 = <&i2c5_pins>; - status = "okay"; - - axp15060: pmic@36 { - compatible = "x-powers,axp15060"; - reg = <0x36>; - interrupts = <0>; - interrupt-controller; - #interrupt-cells = <1>; - - regulators { - vcc_3v3: dcdc1 { - regulator-boot-on; - regulator-always-on; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - regulator-name = "vcc_3v3"; - }; - - vdd_cpu: dcdc2 { - regulator-always-on; - regulator-min-microvolt = <500000>; - regulator-max-microvolt = <1540000>; - regulator-name = "vdd-cpu"; - }; - - emmc_vdd: aldo4 { - regulator-boot-on; - regulator-always-on; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-name = "emmc_vdd"; - }; - }; - }; -}; - -&i2c6 { - clock-frequency = <100000>; - i2c-sda-hold-time-ns = <300>; - i2c-sda-falling-time-ns = <510>; - i2c-scl-falling-time-ns = <510>; - pinctrl-names = "default"; - pinctrl-0 = <&i2c6_pins>; - status = "okay"; -}; - -&i2srx { - pinctrl-names = "default"; - pinctrl-0 = <&i2srx_pins>; - status = "okay"; -}; - -&i2stx0 { - pinctrl-names = "default"; - pinctrl-0 = <&mclk_ext_pins>; - status = "okay"; -}; - -&i2stx1 { - pinctrl-names = "default"; - pinctrl-0 = <&i2stx1_pins>; - status = "okay"; -}; - &mmc0 { - max-frequency = <100000000>; - assigned-clocks = <&syscrg JH7110_SYSCLK_SDIO0_SDCARD>; - assigned-clock-rates = <50000000>; - bus-width = <8>; - cap-mmc-highspeed; - mmc-ddr-1_8v; - mmc-hs200-1_8v; non-removable; - cap-mmc-hw-reset; - post-power-on-delay-ms = <200>; - pinctrl-names = "default"; - pinctrl-0 = <&mmc0_pins>; - vmmc-supply = <&vcc_3v3>; - vqmmc-supply = <&emmc_vdd>; - status = "okay"; -}; - -&mmc1 { - max-frequency = <100000000>; - assigned-clocks = <&syscrg JH7110_SYSCLK_SDIO1_SDCARD>; - assigned-clock-rates = <50000000>; - bus-width = <4>; - no-sdio; - no-mmc; - broken-cd; - cap-sd-highspeed; - post-power-on-delay-ms = <200>; - pinctrl-names = "default"; - pinctrl-0 = <&mmc1_pins>; - status = "okay"; -}; - -&pwmdac { - pinctrl-names = "default"; - pinctrl-0 = <&pwmdac_pins>; - status = "okay"; -}; - -&qspi { - #address-cells = <1>; - #size-cells = <0>; - status = "okay"; - - nor_flash: flash@0 { - compatible = "jedec,spi-nor"; - reg = <0>; - cdns,read-delay = <5>; - spi-max-frequency = <12000000>; - cdns,tshsl-ns = <1>; - cdns,tsd2d-ns = <1>; - cdns,tchsh-ns = <1>; - cdns,tslch-ns = <1>; - - partitions { - compatible = "fixed-partitions"; - #address-cells = <1>; - #size-cells = <1>; - - spl@0 { - reg = <0x0 0x80000>; - }; - uboot-env@f0000 { - reg = <0xf0000 0x10000>; - }; - uboot@100000 { - reg = <0x100000 0x400000>; - }; - reserved-data@600000 { - reg = <0x600000 0xa00000>; - }; - }; - }; -}; - -&pwm { - pinctrl-names = "default"; - pinctrl-0 = <&pwm_pins>; - status = "okay"; -}; - -&spi0 { - pinctrl-names = "default"; - pinctrl-0 = <&spi0_pins>; - status = "okay"; - - spi_dev0: spi@0 { - compatible = "rohm,dh2228fv"; - reg = <0>; - spi-max-frequency = <10000000>; - }; -}; - -&sysgpio { - i2c0_pins: i2c0-0 { - i2c-pins { - pinmux = <GPIOMUX(57, GPOUT_LOW, - GPOEN_SYS_I2C0_CLK, - GPI_SYS_I2C0_CLK)>, - <GPIOMUX(58, GPOUT_LOW, - GPOEN_SYS_I2C0_DATA, - GPI_SYS_I2C0_DATA)>; - bias-disable; /* external pull-up */ - input-enable; - input-schmitt-enable; - }; - }; - - i2c2_pins: i2c2-0 { - i2c-pins { - pinmux = <GPIOMUX(3, GPOUT_LOW, - GPOEN_SYS_I2C2_CLK, - GPI_SYS_I2C2_CLK)>, - <GPIOMUX(2, GPOUT_LOW, - GPOEN_SYS_I2C2_DATA, - GPI_SYS_I2C2_DATA)>; - bias-disable; /* external pull-up */ - input-enable; - input-schmitt-enable; - }; - }; - - i2c5_pins: i2c5-0 { - i2c-pins { - pinmux = <GPIOMUX(19, GPOUT_LOW, - GPOEN_SYS_I2C5_CLK, - GPI_SYS_I2C5_CLK)>, - <GPIOMUX(20, GPOUT_LOW, - GPOEN_SYS_I2C5_DATA, - GPI_SYS_I2C5_DATA)>; - bias-disable; /* external pull-up */ - input-enable; - input-schmitt-enable; - }; - }; - - i2c6_pins: i2c6-0 { - i2c-pins { - pinmux = <GPIOMUX(16, GPOUT_LOW, - GPOEN_SYS_I2C6_CLK, - GPI_SYS_I2C6_CLK)>, - <GPIOMUX(17, GPOUT_LOW, - GPOEN_SYS_I2C6_DATA, - GPI_SYS_I2C6_DATA)>; - bias-disable; /* external pull-up */ - input-enable; - input-schmitt-enable; - }; - }; - - i2srx_pins: i2srx-0 { - clk-sd-pins { - pinmux = <GPIOMUX(38, GPOUT_LOW, - GPOEN_DISABLE, - GPI_SYS_I2SRX_BCLK)>, - <GPIOMUX(63, GPOUT_LOW, - GPOEN_DISABLE, - GPI_SYS_I2SRX_LRCK)>, - <GPIOMUX(38, GPOUT_LOW, - GPOEN_DISABLE, - GPI_SYS_I2STX1_BCLK)>, - <GPIOMUX(63, GPOUT_LOW, - GPOEN_DISABLE, - GPI_SYS_I2STX1_LRCK)>, - <GPIOMUX(61, GPOUT_LOW, - GPOEN_DISABLE, - GPI_SYS_I2SRX_SDIN0)>; - input-enable; - }; - }; - - i2stx1_pins: i2stx1-0 { - sd-pins { - pinmux = <GPIOMUX(44, GPOUT_SYS_I2STX1_SDO0, - GPOEN_ENABLE, - GPI_NONE)>; - bias-disable; - input-disable; - }; - }; - - mclk_ext_pins: mclk-ext-0 { - mclk-ext-pins { - pinmux = <GPIOMUX(4, GPOUT_LOW, - GPOEN_DISABLE, - GPI_SYS_MCLK_EXT)>; - input-enable; - }; - }; - - mmc0_pins: mmc0-0 { - rst-pins { - pinmux = <GPIOMUX(62, GPOUT_SYS_SDIO0_RST, - GPOEN_ENABLE, - GPI_NONE)>; - bias-pull-up; - drive-strength = <12>; - input-disable; - input-schmitt-disable; - slew-rate = <0>; - }; - - mmc-pins { - pinmux = <PINMUX(64, 0)>, - <PINMUX(65, 0)>, - <PINMUX(66, 0)>, - <PINMUX(67, 0)>, - <PINMUX(68, 0)>, - <PINMUX(69, 0)>, - <PINMUX(70, 0)>, - <PINMUX(71, 0)>, - <PINMUX(72, 0)>, - <PINMUX(73, 0)>; - bias-pull-up; - drive-strength = <12>; - input-enable; - }; - }; - - mmc1_pins: mmc1-0 { - clk-pins { - pinmux = <GPIOMUX(10, GPOUT_SYS_SDIO1_CLK, - GPOEN_ENABLE, - GPI_NONE)>; - bias-pull-up; - drive-strength = <12>; - input-disable; - input-schmitt-disable; - slew-rate = <0>; - }; - - mmc-pins { - pinmux = <GPIOMUX(9, GPOUT_SYS_SDIO1_CMD, - GPOEN_SYS_SDIO1_CMD, - GPI_SYS_SDIO1_CMD)>, - <GPIOMUX(11, GPOUT_SYS_SDIO1_DATA0, - GPOEN_SYS_SDIO1_DATA0, - GPI_SYS_SDIO1_DATA0)>, - <GPIOMUX(12, GPOUT_SYS_SDIO1_DATA1, - GPOEN_SYS_SDIO1_DATA1, - GPI_SYS_SDIO1_DATA1)>, - <GPIOMUX(7, GPOUT_SYS_SDIO1_DATA2, - GPOEN_SYS_SDIO1_DATA2, - GPI_SYS_SDIO1_DATA2)>, - <GPIOMUX(8, GPOUT_SYS_SDIO1_DATA3, - GPOEN_SYS_SDIO1_DATA3, - GPI_SYS_SDIO1_DATA3)>; - bias-pull-up; - drive-strength = <12>; - input-enable; - input-schmitt-enable; - slew-rate = <0>; - }; - }; - - pwmdac_pins: pwmdac-0 { - pwmdac-pins { - pinmux = <GPIOMUX(33, GPOUT_SYS_PWMDAC_LEFT, - GPOEN_ENABLE, - GPI_NONE)>, - <GPIOMUX(34, GPOUT_SYS_PWMDAC_RIGHT, - GPOEN_ENABLE, - GPI_NONE)>; - bias-disable; - drive-strength = <2>; - input-disable; - input-schmitt-disable; - slew-rate = <0>; - }; - }; - - pwm_pins: pwm-0 { - pwm-pins { - pinmux = <GPIOMUX(46, GPOUT_SYS_PWM_CHANNEL0, - GPOEN_SYS_PWM0_CHANNEL0, - GPI_NONE)>, - <GPIOMUX(59, GPOUT_SYS_PWM_CHANNEL1, - GPOEN_SYS_PWM0_CHANNEL1, - GPI_NONE)>; - bias-disable; - drive-strength = <12>; - input-disable; - input-schmitt-disable; - slew-rate = <0>; - }; - }; - - spi0_pins: spi0-0 { - mosi-pins { - pinmux = <GPIOMUX(52, GPOUT_SYS_SPI0_TXD, - GPOEN_ENABLE, - GPI_NONE)>; - bias-disable; - input-disable; - input-schmitt-disable; - }; - - miso-pins { - pinmux = <GPIOMUX(53, GPOUT_LOW, - GPOEN_DISABLE, - GPI_SYS_SPI0_RXD)>; - bias-pull-up; - input-enable; - input-schmitt-enable; - }; - - sck-pins { - pinmux = <GPIOMUX(48, GPOUT_SYS_SPI0_CLK, - GPOEN_ENABLE, - GPI_SYS_SPI0_CLK)>; - bias-disable; - input-disable; - input-schmitt-disable; - }; - - ss-pins { - pinmux = <GPIOMUX(49, GPOUT_SYS_SPI0_FSS, - GPOEN_ENABLE, - GPI_SYS_SPI0_FSS)>; - bias-disable; - input-disable; - input-schmitt-disable; - }; - }; - - tdm_pins: tdm-0 { - tx-pins { - pinmux = <GPIOMUX(44, GPOUT_SYS_TDM_TXD, - GPOEN_ENABLE, - GPI_NONE)>; - bias-pull-up; - drive-strength = <2>; - input-disable; - input-schmitt-disable; - slew-rate = <0>; - }; - - rx-pins { - pinmux = <GPIOMUX(61, GPOUT_HIGH, - GPOEN_DISABLE, - GPI_SYS_TDM_RXD)>; - input-enable; - }; - - sync-pins { - pinmux = <GPIOMUX(63, GPOUT_HIGH, - GPOEN_DISABLE, - GPI_SYS_TDM_SYNC)>; - input-enable; - }; - - pcmclk-pins { - pinmux = <GPIOMUX(38, GPOUT_HIGH, - GPOEN_DISABLE, - GPI_SYS_TDM_CLK)>; - input-enable; - }; - }; - - uart0_pins: uart0-0 { - tx-pins { - pinmux = <GPIOMUX(5, GPOUT_SYS_UART0_TX, - GPOEN_ENABLE, - GPI_NONE)>; - bias-disable; - drive-strength = <12>; - input-disable; - input-schmitt-disable; - slew-rate = <0>; - }; - - rx-pins { - pinmux = <GPIOMUX(6, GPOUT_LOW, - GPOEN_DISABLE, - GPI_SYS_UART0_RX)>; - bias-disable; /* external pull-up */ - drive-strength = <2>; - input-enable; - input-schmitt-enable; - slew-rate = <0>; - }; - }; -}; - -&tdm { - pinctrl-names = "default"; - pinctrl-0 = <&tdm_pins>; - status = "okay"; -}; - -&uart0 { - pinctrl-names = "default"; - pinctrl-0 = <&uart0_pins>; - status = "okay"; -}; - -&usb0 { - dr_mode = "peripheral"; - status = "okay"; -}; - -&U74_1 { - cpu-supply = <&vdd_cpu>; -}; - -&U74_2 { - cpu-supply = <&vdd_cpu>; -}; - -&U74_3 { - cpu-supply = <&vdd_cpu>; -}; - -&U74_4 { - cpu-supply = <&vdd_cpu>; }; diff --git a/arch/riscv/boot/dts/starfive/jh7110.dtsi b/arch/riscv/boot/dts/starfive/jh7110.dtsi index 4a5708f7fcf7..18047195c600 100644 --- a/arch/riscv/boot/dts/starfive/jh7110.dtsi +++ b/arch/riscv/boot/dts/starfive/jh7110.dtsi @@ -15,7 +15,7 @@ #address-cells = <2>; #size-cells = <2>; - cpus { + cpus: cpus { #address-cells = <1>; #size-cells = <0>; diff --git a/arch/riscv/boot/dts/thead/th1520.dtsi b/arch/riscv/boot/dts/thead/th1520.dtsi index 8b915e206f3a..d2fa25839012 100644 --- a/arch/riscv/boot/dts/thead/th1520.dtsi +++ b/arch/riscv/boot/dts/thead/th1520.dtsi @@ -193,6 +193,33 @@ status = "disabled"; }; + emmc: mmc@ffe7080000 { + compatible = "thead,th1520-dwcmshc"; + reg = <0xff 0xe7080000 0x0 0x10000>; + interrupts = <62 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&sdhci_clk>; + clock-names = "core"; + status = "disabled"; + }; + + sdio0: mmc@ffe7090000 { + compatible = "thead,th1520-dwcmshc"; + reg = <0xff 0xe7090000 0x0 0x10000>; + interrupts = <64 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&sdhci_clk>; + clock-names = "core"; + status = "disabled"; + }; + + sdio1: mmc@ffe70a0000 { + compatible = "thead,th1520-dwcmshc"; + reg = <0xff 0xe70a0000 0x0 0x10000>; + interrupts = <71 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&sdhci_clk>; + clock-names = "core"; + status = "disabled"; + }; + uart1: serial@ffe7f00000 { compatible = "snps,dw-apb-uart"; reg = <0xff 0xe7f00000 0x0 0x100>; @@ -311,33 +338,6 @@ status = "disabled"; }; - emmc: mmc@ffe7080000 { - compatible = "thead,th1520-dwcmshc"; - reg = <0xff 0xe7080000 0x0 0x10000>; - interrupts = <62 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&sdhci_clk>; - clock-names = "core"; - status = "disabled"; - }; - - sdio0: mmc@ffe7090000 { - compatible = "thead,th1520-dwcmshc"; - reg = <0xff 0xe7090000 0x0 0x10000>; - interrupts = <64 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&sdhci_clk>; - clock-names = "core"; - status = "disabled"; - }; - - sdio1: mmc@ffe70a0000 { - compatible = "thead,th1520-dwcmshc"; - reg = <0xff 0xe70a0000 0x0 0x10000>; - interrupts = <71 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&sdhci_clk>; - clock-names = "core"; - status = "disabled"; - }; - timer0: timer@ffefc32000 { compatible = "snps,dw-apb-timer"; reg = <0xff 0xefc32000 0x0 0x14>; |