diff options
Diffstat (limited to 'arch/powerpc/crypto/ghashp8-ppc.pl')
| -rw-r--r-- | arch/powerpc/crypto/ghashp8-ppc.pl | 243 |
1 files changed, 243 insertions, 0 deletions
diff --git a/arch/powerpc/crypto/ghashp8-ppc.pl b/arch/powerpc/crypto/ghashp8-ppc.pl new file mode 100644 index 000000000000..041e633c214f --- /dev/null +++ b/arch/powerpc/crypto/ghashp8-ppc.pl @@ -0,0 +1,243 @@ +#!/usr/bin/env perl +# SPDX-License-Identifier: GPL-2.0 + +# This code is taken from the OpenSSL project but the author (Andy Polyakov) +# has relicensed it under the GPLv2. Therefore this program is free software; +# you can redistribute it and/or modify it under the terms of the GNU General +# Public License version 2 as published by the Free Software Foundation. +# +# The original headers, including the original license headers, are +# included below for completeness. + +# ==================================================================== +# Written by Andy Polyakov <appro@openssl.org> for the OpenSSL +# project. The module is, however, dual licensed under OpenSSL and +# CRYPTOGAMS licenses depending on where you obtain it. For further +# details see https://www.openssl.org/~appro/cryptogams/. +# ==================================================================== +# +# GHASH for PowerISA v2.07. +# +# July 2014 +# +# Accurate performance measurements are problematic, because it's +# always virtualized setup with possibly throttled processor. +# Relative comparison is therefore more informative. This initial +# version is ~2.1x slower than hardware-assisted AES-128-CTR, ~12x +# faster than "4-bit" integer-only compiler-generated 64-bit code. +# "Initial version" means that there is room for futher improvement. + +$flavour=shift; +$output =shift; + +if ($flavour =~ /64/) { + $SIZE_T=8; + $LRSAVE=2*$SIZE_T; + $STU="stdu"; + $POP="ld"; + $PUSH="std"; +} elsif ($flavour =~ /32/) { + $SIZE_T=4; + $LRSAVE=$SIZE_T; + $STU="stwu"; + $POP="lwz"; + $PUSH="stw"; +} else { die "nonsense $flavour"; } + +$0 =~ m/(.*[\/\\])[^\/\\]+$/; $dir=$1; +( $xlate="${dir}ppc-xlate.pl" and -f $xlate ) or +( $xlate="${dir}../../perlasm/ppc-xlate.pl" and -f $xlate) or +die "can't locate ppc-xlate.pl"; + +open STDOUT,"| $^X $xlate $flavour $output" || die "can't call $xlate: $!"; + +my ($Xip,$Htbl,$inp,$len)=map("r$_",(3..6)); # argument block + +my ($Xl,$Xm,$Xh,$IN)=map("v$_",(0..3)); +my ($zero,$t0,$t1,$t2,$xC2,$H,$Hh,$Hl,$lemask)=map("v$_",(4..12)); +my $vrsave="r12"; + +$code=<<___; +.machine "any" + +.text + +.globl .gcm_init_p8 + lis r0,0xfff0 + li r8,0x10 + mfspr $vrsave,256 + li r9,0x20 + mtspr 256,r0 + li r10,0x30 + lvx_u $H,0,r4 # load H + le?xor r7,r7,r7 + le?addi r7,r7,0x8 # need a vperm start with 08 + le?lvsr 5,0,r7 + le?vspltisb 6,0x0f + le?vxor 5,5,6 # set a b-endian mask + le?vperm $H,$H,$H,5 + + vspltisb $xC2,-16 # 0xf0 + vspltisb $t0,1 # one + vaddubm $xC2,$xC2,$xC2 # 0xe0 + vxor $zero,$zero,$zero + vor $xC2,$xC2,$t0 # 0xe1 + vsldoi $xC2,$xC2,$zero,15 # 0xe1... + vsldoi $t1,$zero,$t0,1 # ...1 + vaddubm $xC2,$xC2,$xC2 # 0xc2... + vspltisb $t2,7 + vor $xC2,$xC2,$t1 # 0xc2....01 + vspltb $t1,$H,0 # most significant byte + vsl $H,$H,$t0 # H<<=1 + vsrab $t1,$t1,$t2 # broadcast carry bit + vand $t1,$t1,$xC2 + vxor $H,$H,$t1 # twisted H + + vsldoi $H,$H,$H,8 # twist even more ... + vsldoi $xC2,$zero,$xC2,8 # 0xc2.0 + vsldoi $Hl,$zero,$H,8 # ... and split + vsldoi $Hh,$H,$zero,8 + + stvx_u $xC2,0,r3 # save pre-computed table + stvx_u $Hl,r8,r3 + stvx_u $H, r9,r3 + stvx_u $Hh,r10,r3 + + mtspr 256,$vrsave + blr + .long 0 + .byte 0,12,0x14,0,0,0,2,0 + .long 0 +.size .gcm_init_p8,.-.gcm_init_p8 + +.globl .gcm_gmult_p8 + lis r0,0xfff8 + li r8,0x10 + mfspr $vrsave,256 + li r9,0x20 + mtspr 256,r0 + li r10,0x30 + lvx_u $IN,0,$Xip # load Xi + + lvx_u $Hl,r8,$Htbl # load pre-computed table + le?lvsl $lemask,r0,r0 + lvx_u $H, r9,$Htbl + le?vspltisb $t0,0x07 + lvx_u $Hh,r10,$Htbl + le?vxor $lemask,$lemask,$t0 + lvx_u $xC2,0,$Htbl + le?vperm $IN,$IN,$IN,$lemask + vxor $zero,$zero,$zero + + vpmsumd $Xl,$IN,$Hl # H.lo·Xi.lo + vpmsumd $Xm,$IN,$H # H.hi·Xi.lo+H.lo·Xi.hi + vpmsumd $Xh,$IN,$Hh # H.hi·Xi.hi + + vpmsumd $t2,$Xl,$xC2 # 1st phase + + vsldoi $t0,$Xm,$zero,8 + vsldoi $t1,$zero,$Xm,8 + vxor $Xl,$Xl,$t0 + vxor $Xh,$Xh,$t1 + + vsldoi $Xl,$Xl,$Xl,8 + vxor $Xl,$Xl,$t2 + + vsldoi $t1,$Xl,$Xl,8 # 2nd phase + vpmsumd $Xl,$Xl,$xC2 + vxor $t1,$t1,$Xh + vxor $Xl,$Xl,$t1 + + le?vperm $Xl,$Xl,$Xl,$lemask + stvx_u $Xl,0,$Xip # write out Xi + + mtspr 256,$vrsave + blr + .long 0 + .byte 0,12,0x14,0,0,0,2,0 + .long 0 +.size .gcm_gmult_p8,.-.gcm_gmult_p8 + +.globl .gcm_ghash_p8 + lis r0,0xfff8 + li r8,0x10 + mfspr $vrsave,256 + li r9,0x20 + mtspr 256,r0 + li r10,0x30 + lvx_u $Xl,0,$Xip # load Xi + + lvx_u $Hl,r8,$Htbl # load pre-computed table + le?lvsl $lemask,r0,r0 + lvx_u $H, r9,$Htbl + le?vspltisb $t0,0x07 + lvx_u $Hh,r10,$Htbl + le?vxor $lemask,$lemask,$t0 + lvx_u $xC2,0,$Htbl + le?vperm $Xl,$Xl,$Xl,$lemask + vxor $zero,$zero,$zero + + lvx_u $IN,0,$inp + addi $inp,$inp,16 + subi $len,$len,16 + le?vperm $IN,$IN,$IN,$lemask + vxor $IN,$IN,$Xl + b Loop + +.align 5 +Loop: + subic $len,$len,16 + vpmsumd $Xl,$IN,$Hl # H.lo·Xi.lo + subfe. r0,r0,r0 # borrow?-1:0 + vpmsumd $Xm,$IN,$H # H.hi·Xi.lo+H.lo·Xi.hi + and r0,r0,$len + vpmsumd $Xh,$IN,$Hh # H.hi·Xi.hi + add $inp,$inp,r0 + + vpmsumd $t2,$Xl,$xC2 # 1st phase + + vsldoi $t0,$Xm,$zero,8 + vsldoi $t1,$zero,$Xm,8 + vxor $Xl,$Xl,$t0 + vxor $Xh,$Xh,$t1 + + vsldoi $Xl,$Xl,$Xl,8 + vxor $Xl,$Xl,$t2 + lvx_u $IN,0,$inp + addi $inp,$inp,16 + + vsldoi $t1,$Xl,$Xl,8 # 2nd phase + vpmsumd $Xl,$Xl,$xC2 + le?vperm $IN,$IN,$IN,$lemask + vxor $t1,$t1,$Xh + vxor $IN,$IN,$t1 + vxor $IN,$IN,$Xl + beq Loop # did $len-=16 borrow? + + vxor $Xl,$Xl,$t1 + le?vperm $Xl,$Xl,$Xl,$lemask + stvx_u $Xl,0,$Xip # write out Xi + + mtspr 256,$vrsave + blr + .long 0 + .byte 0,12,0x14,0,0,0,4,0 + .long 0 +.size .gcm_ghash_p8,.-.gcm_ghash_p8 + +.asciz "GHASH for PowerISA 2.07, CRYPTOGAMS by <appro\@openssl.org>" +.align 2 +___ + +foreach (split("\n",$code)) { + if ($flavour =~ /le$/o) { # little-endian + s/le\?//o or + s/be\?/#be#/o; + } else { + s/le\?/#le#/o or + s/be\?//o; + } + print $_,"\n"; +} + +close STDOUT; # enforce flush |