diff options
Diffstat (limited to 'arch/powerpc/boot')
29 files changed, 96 insertions, 1773 deletions
diff --git a/arch/powerpc/boot/Makefile b/arch/powerpc/boot/Makefile index c53a1b8bba8b..b88fd27a45f0 100644 --- a/arch/powerpc/boot/Makefile +++ b/arch/powerpc/boot/Makefile @@ -70,16 +70,14 @@ BOOTCFLAGS += -I$(objtree)/$(obj) -I$(srctree)/$(obj) DTC_FLAGS ?= -p 1024 $(obj)/4xx.o: BOOTCFLAGS += -mcpu=405 -$(obj)/ebony.o: BOOTCFLAGS += -mcpu=405 +$(obj)/ebony.o: BOOTCFLAGS += -mcpu=440 $(obj)/cuboot-hotfoot.o: BOOTCFLAGS += -mcpu=405 -$(obj)/cuboot-taishan.o: BOOTCFLAGS += -mcpu=405 -$(obj)/cuboot-katmai.o: BOOTCFLAGS += -mcpu=405 +$(obj)/cuboot-taishan.o: BOOTCFLAGS += -mcpu=440 +$(obj)/cuboot-katmai.o: BOOTCFLAGS += -mcpu=440 $(obj)/cuboot-acadia.o: BOOTCFLAGS += -mcpu=405 -$(obj)/treeboot-walnut.o: BOOTCFLAGS += -mcpu=405 $(obj)/treeboot-iss4xx.o: BOOTCFLAGS += -mcpu=405 $(obj)/treeboot-currituck.o: BOOTCFLAGS += -mcpu=405 $(obj)/treeboot-akebono.o: BOOTCFLAGS += -mcpu=405 -$(obj)/virtex405-head.o: BOOTAFLAGS += -mcpu=405 # The pre-boot decompressors pull in a lot of kernel headers and other source # files. This creates a bit of a dependency headache since we need to copy @@ -119,7 +117,7 @@ src-wlib-y := string.S crt0.S stdio.c decompress.c main.c \ elf_util.c $(zlib-y) devtree.c stdlib.c \ oflib.c ofconsole.c cuboot.c -src-wlib-$(CONFIG_PPC_MPC52XX) += mpc52xx-psc.c +src-wlib-$(CONFIG_PPC_MPC52xx) += mpc52xx-psc.c src-wlib-$(CONFIG_PPC64_BOOT_WRAPPER) += opal-calls.S opal.c ifndef CONFIG_PPC64_BOOT_WRAPPER src-wlib-y += crtsavres.S @@ -129,14 +127,12 @@ src-wlib-$(CONFIG_44x) += 4xx.c ebony.c bamboo.c src-wlib-$(CONFIG_PPC_8xx) += mpc8xx.c planetcore.c fsl-soc.c src-wlib-$(CONFIG_PPC_82xx) += pq2.c fsl-soc.c planetcore.c src-wlib-$(CONFIG_EMBEDDED6xx) += ugecon.c fsl-soc.c -src-wlib-$(CONFIG_XILINX_VIRTEX) += uartlite.c src-wlib-$(CONFIG_CPM) += cpm-serial.c src-plat-y := of.c epapr.c -src-plat-$(CONFIG_40x) += fixed-head.S ep405.c cuboot-hotfoot.c \ - treeboot-walnut.c cuboot-acadia.c \ - cuboot-kilauea.c simpleboot.c \ - virtex405-head.S virtex.c +src-plat-$(CONFIG_40x) += fixed-head.S cuboot-hotfoot.c \ + cuboot-acadia.c \ + cuboot-kilauea.c simpleboot.c src-plat-$(CONFIG_44x) += treeboot-ebony.c cuboot-ebony.c treeboot-bamboo.c \ cuboot-bamboo.c cuboot-sam440ep.c \ cuboot-sequoia.c cuboot-rainier.c \ @@ -144,7 +140,7 @@ src-plat-$(CONFIG_44x) += treeboot-ebony.c cuboot-ebony.c treeboot-bamboo.c \ cuboot-warp.c cuboot-yosemite.c \ treeboot-iss4xx.c treeboot-currituck.c \ treeboot-akebono.c \ - simpleboot.c fixed-head.S virtex.c + simpleboot.c fixed-head.S src-plat-$(CONFIG_PPC_8xx) += cuboot-8xx.c fixed-head.S ep88xc.c redboot-8xx.c src-plat-$(CONFIG_PPC_MPC52xx) += cuboot-52xx.c src-plat-$(CONFIG_PPC_82xx) += cuboot-pq2.c fixed-head.S ep8248e.c cuboot-824x.c @@ -279,9 +275,7 @@ image-$(CONFIG_EPAPR_BOOT) += zImage.epapr # # Board ports in arch/powerpc/platform/40x/Kconfig -image-$(CONFIG_EP405) += dtbImage.ep405 image-$(CONFIG_HOTFOOT) += cuImage.hotfoot -image-$(CONFIG_WALNUT) += treeImage.walnut image-$(CONFIG_ACADIA) += cuImage.acadia image-$(CONFIG_OBS600) += uImage.obs600 @@ -372,6 +366,8 @@ initrd-y := $(patsubst zImage%, zImage.initrd%, \ $(patsubst treeImage%, treeImage.initrd%, $(image-y))))) initrd-y := $(filter-out $(image-y), $(initrd-y)) targets += $(image-y) $(initrd-y) +targets += $(foreach x, dtbImage uImage cuImage simpleImage treeImage, \ + $(patsubst $(x).%, dts/%.dtb, $(filter $(x).%, $(image-y)))) $(addprefix $(obj)/, $(initrd-y)): $(obj)/ramdisk.image.gz diff --git a/arch/powerpc/boot/dts/Makefile b/arch/powerpc/boot/dts/Makefile index 1cbc0e4ce857..fb335d05aae8 100644 --- a/arch/powerpc/boot/dts/Makefile +++ b/arch/powerpc/boot/dts/Makefile @@ -4,4 +4,3 @@ subdir-y += fsl dtstree := $(srctree)/$(src) dtb-$(CONFIG_OF_ALL_DTBS) := $(patsubst $(dtstree)/%.dts,%.dtb, $(wildcard $(dtstree)/*.dts)) -dtb-$(CONFIG_XILINX_VIRTEX440_GENERIC_BOARD) += virtex440-ml507.dtb virtex440-ml510.dtb diff --git a/arch/powerpc/boot/dts/akebono.dts b/arch/powerpc/boot/dts/akebono.dts index cd9d66041a3f..df18f8dc4642 100644 --- a/arch/powerpc/boot/dts/akebono.dts +++ b/arch/powerpc/boot/dts/akebono.dts @@ -248,7 +248,7 @@ }; }; - PCIE0: pciex@10100000000 { + PCIE0: pcie@10100000000 { device_type = "pci"; #interrupt-cells = <1>; #size-cells = <2>; @@ -288,7 +288,7 @@ 0x0 0x0 0x0 0x4 &MPIC 48 0x2 /* int D */>; }; - PCIE1: pciex@20100000000 { + PCIE1: pcie@20100000000 { device_type = "pci"; #interrupt-cells = <1>; #size-cells = <2>; @@ -328,7 +328,7 @@ 0x0 0x0 0x0 0x4 &MPIC 56 0x2 /* int D */>; }; - PCIE2: pciex@18100000000 { + PCIE2: pcie@18100000000 { device_type = "pci"; #interrupt-cells = <1>; #size-cells = <2>; @@ -368,7 +368,7 @@ 0x0 0x0 0x0 0x4 &MPIC 64 0x2 /* int D */>; }; - PCIE3: pciex@28100000000 { + PCIE3: pcie@28100000000 { device_type = "pci"; #interrupt-cells = <1>; #size-cells = <2>; diff --git a/arch/powerpc/boot/dts/bluestone.dts b/arch/powerpc/boot/dts/bluestone.dts index cc965a1816b6..aa1ae94cd776 100644 --- a/arch/powerpc/boot/dts/bluestone.dts +++ b/arch/powerpc/boot/dts/bluestone.dts @@ -325,7 +325,7 @@ }; }; - PCIE0: pciex@d00000000 { + PCIE0: pcie@d00000000 { device_type = "pci"; #interrupt-cells = <1>; #size-cells = <2>; diff --git a/arch/powerpc/boot/dts/canyonlands.dts b/arch/powerpc/boot/dts/canyonlands.dts index 0d6ac92d0f5e..c5fbb08e0a6e 100644 --- a/arch/powerpc/boot/dts/canyonlands.dts +++ b/arch/powerpc/boot/dts/canyonlands.dts @@ -461,7 +461,7 @@ interrupt-map = < 0x0 0x0 0x0 0x0 &UIC1 0x0 0x8 >; }; - PCIE0: pciex@d00000000 { + PCIE0: pcie@d00000000 { device_type = "pci"; #interrupt-cells = <1>; #size-cells = <2>; @@ -503,7 +503,7 @@ 0x0 0x0 0x0 0x4 &UIC3 0xf 0x4 /* swizzled int D */>; }; - PCIE1: pciex@d20000000 { + PCIE1: pcie@d20000000 { device_type = "pci"; #interrupt-cells = <1>; #size-cells = <2>; diff --git a/arch/powerpc/boot/dts/currituck.dts b/arch/powerpc/boot/dts/currituck.dts index b6d87b9c2cef..aea8af810106 100644 --- a/arch/powerpc/boot/dts/currituck.dts +++ b/arch/powerpc/boot/dts/currituck.dts @@ -122,7 +122,7 @@ }; }; - PCIE0: pciex@10100000000 { // 4xGBIF1 + PCIE0: pcie@10100000000 { // 4xGBIF1 device_type = "pci"; #interrupt-cells = <1>; #size-cells = <2>; @@ -160,7 +160,7 @@ 0x0 0x0 0x0 0x4 &MPIC 49 0x2 /* int D */>; }; - PCIE1: pciex@30100000000 { // 4xGBIF0 + PCIE1: pcie@30100000000 { // 4xGBIF0 device_type = "pci"; #interrupt-cells = <1>; #size-cells = <2>; @@ -197,7 +197,7 @@ 0x0 0x0 0x0 0x4 &MPIC 41 0x2 /* int D */>; }; - PCIE2: pciex@38100000000 { // 2xGBIF0 + PCIE2: pcie@38100000000 { // 2xGBIF0 device_type = "pci"; #interrupt-cells = <1>; #size-cells = <2>; diff --git a/arch/powerpc/boot/dts/ep405.dts b/arch/powerpc/boot/dts/ep405.dts deleted file mode 100644 index 4ac9c5ab6e6b..000000000000 --- a/arch/powerpc/boot/dts/ep405.dts +++ /dev/null @@ -1,230 +0,0 @@ -/* - * Device Tree Source for EP405 - * - * Copyright 2007 IBM Corp. - * Benjamin Herrenschmidt <benh@kernel.crashing.org> - * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without - * any warranty of any kind, whether express or implied. - */ - -/dts-v1/; - -/ { - #address-cells = <1>; - #size-cells = <1>; - model = "ep405"; - compatible = "ep405"; - dcr-parent = <&{/cpus/cpu@0}>; - - aliases { - ethernet0 = &EMAC; - serial0 = &UART0; - serial1 = &UART1; - }; - - cpus { - #address-cells = <1>; - #size-cells = <0>; - - cpu@0 { - device_type = "cpu"; - model = "PowerPC,405GP"; - reg = <0x00000000>; - clock-frequency = <200000000>; /* Filled in by zImage */ - timebase-frequency = <0>; /* Filled in by zImage */ - i-cache-line-size = <32>; - d-cache-line-size = <32>; - i-cache-size = <16384>; - d-cache-size = <16384>; - dcr-controller; - dcr-access-method = "native"; - }; - }; - - memory { - device_type = "memory"; - reg = <0x00000000 0x00000000>; /* Filled in by zImage */ - }; - - UIC0: interrupt-controller { - compatible = "ibm,uic"; - interrupt-controller; - cell-index = <0>; - dcr-reg = <0x0c0 0x009>; - #address-cells = <0>; - #size-cells = <0>; - #interrupt-cells = <2>; - }; - - plb { - compatible = "ibm,plb3"; - #address-cells = <1>; - #size-cells = <1>; - ranges; - clock-frequency = <0>; /* Filled in by zImage */ - - SDRAM0: memory-controller { - compatible = "ibm,sdram-405gp"; - dcr-reg = <0x010 0x002>; - }; - - MAL: mcmal { - compatible = "ibm,mcmal-405gp", "ibm,mcmal"; - dcr-reg = <0x180 0x062>; - num-tx-chans = <1>; - num-rx-chans = <1>; - interrupt-parent = <&UIC0>; - interrupts = < - 0xb 0x4 /* TXEOB */ - 0xc 0x4 /* RXEOB */ - 0xa 0x4 /* SERR */ - 0xd 0x4 /* TXDE */ - 0xe 0x4 /* RXDE */>; - }; - - POB0: opb { - compatible = "ibm,opb-405gp", "ibm,opb"; - #address-cells = <1>; - #size-cells = <1>; - ranges = <0xef600000 0xef600000 0x00a00000>; - dcr-reg = <0x0a0 0x005>; - clock-frequency = <0>; /* Filled in by zImage */ - - UART0: serial@ef600300 { - device_type = "serial"; - compatible = "ns16550"; - reg = <0xef600300 0x00000008>; - virtual-reg = <0xef600300>; - clock-frequency = <0>; /* Filled in by zImage */ - current-speed = <9600>; - interrupt-parent = <&UIC0>; - interrupts = <0x0 0x4>; - }; - - UART1: serial@ef600400 { - device_type = "serial"; - compatible = "ns16550"; - reg = <0xef600400 0x00000008>; - virtual-reg = <0xef600400>; - clock-frequency = <0>; /* Filled in by zImage */ - current-speed = <9600>; - interrupt-parent = <&UIC0>; - interrupts = <0x1 0x4>; - }; - - IIC: i2c@ef600500 { - compatible = "ibm,iic-405gp", "ibm,iic"; - reg = <0xef600500 0x00000011>; - interrupt-parent = <&UIC0>; - interrupts = <0x2 0x4>; - }; - - GPIO: gpio@ef600700 { - compatible = "ibm,gpio-405gp"; - reg = <0xef600700 0x00000020>; - }; - - EMAC: ethernet@ef600800 { - linux,network-index = <0x0>; - device_type = "network"; - compatible = "ibm,emac-405gp", "ibm,emac"; - interrupt-parent = <&UIC0>; - interrupts = < - 0xf 0x4 /* Ethernet */ - 0x9 0x4 /* Ethernet Wake Up */>; - local-mac-address = [000000000000]; /* Filled in by zImage */ - reg = <0xef600800 0x00000070>; - mal-device = <&MAL>; - mal-tx-channel = <0>; - mal-rx-channel = <0>; - cell-index = <0>; - max-frame-size = <1500>; - rx-fifo-size = <4096>; - tx-fifo-size = <2048>; - phy-mode = "rmii"; - phy-map = <0x00000000>; - }; - - }; - - EBC0: ebc { - compatible = "ibm,ebc-405gp", "ibm,ebc"; - dcr-reg = <0x012 0x002>; - #address-cells = <2>; - #size-cells = <1>; - - - /* The ranges property is supplied by the bootwrapper - * and is based on the firmware's configuration of the - * EBC bridge - */ - clock-frequency = <0>; /* Filled in by zImage */ - - /* NVRAM and RTC */ - nvrtc@4,200000 { - compatible = "ds1742"; - reg = <0x00000004 0x00200000 0x00000000>; /* size fixed up by zImage */ - }; - - /* "BCSR" CPLD contains a PCI irq controller */ - bcsr@4,0 { - compatible = "ep405-bcsr"; - reg = <0x00000004 0x00000000 0x00000010>; - interrupt-controller; - /* Routing table */ - irq-routing = [ 00 /* SYSERR */ - 01 /* STTM */ - 01 /* RTC */ - 01 /* FENET */ - 02 /* NB PCIIRQ mux ? */ - 03 /* SB Winbond 8259 ? */ - 04 /* Serial Ring */ - 05 /* USB (ep405pc) */ - 06 /* XIRQ 0 */ - 06 /* XIRQ 1 */ - 06 /* XIRQ 2 */ - 06 /* XIRQ 3 */ - 06 /* XIRQ 4 */ - 06 /* XIRQ 5 */ - 06 /* XIRQ 6 */ - 07]; /* Reserved */ - }; - }; - - PCI0: pci@ec000000 { - device_type = "pci"; - #interrupt-cells = <1>; - #size-cells = <2>; - #address-cells = <3>; - compatible = "ibm,plb405gp-pci", "ibm,plb-pci"; - primary; - reg = <0xeec00000 0x00000008 /* Config space access */ - 0xeed80000 0x00000004 /* IACK */ - 0xeed80000 0x00000004 /* Special cycle */ - 0xef480000 0x00000040>; /* Internal registers */ - - /* Outbound ranges, one memory and one IO, - * later cannot be changed. Chip supports a second - * IO range but we don't use it for now - */ - ranges = <0x02000000 0x00000000 0x80000000 0x80000000 0x00000000 0x20000000 - 0x01000000 0x00000000 0x00000000 0xe8000000 0x00000000 0x00010000>; - - /* Inbound 2GB range starting at 0 */ - dma-ranges = <0x42000000 0x0 0x0 0x0 0x0 0x80000000>; - - /* That's all I know about IRQs on that thing ... */ - interrupt-map-mask = <0xf800 0x0 0x0 0x0>; - interrupt-map = < - /* USB */ - 0x7000 0x0 0x0 0x0 &UIC0 0x1e 0x8 /* IRQ5 */ - >; - }; - }; - - chosen { - stdout-path = "/plb/opb/serial@ef600300"; - }; -}; diff --git a/arch/powerpc/boot/dts/fsl/p4080ds.dts b/arch/powerpc/boot/dts/fsl/p4080ds.dts index 65e20152e22f..969b32c4f2d5 100644 --- a/arch/powerpc/boot/dts/fsl/p4080ds.dts +++ b/arch/powerpc/boot/dts/fsl/p4080ds.dts @@ -125,11 +125,11 @@ i2c@118100 { eeprom@51 { - compatible = "atmel,24c256"; + compatible = "atmel,spd"; reg = <0x51>; }; eeprom@52 { - compatible = "atmel,24c256"; + compatible = "atmel,spd"; reg = <0x52>; }; rtc@68 { @@ -143,6 +143,45 @@ }; }; + i2c@118000 { + zl2006@21 { + compatible = "zl2006"; + reg = <0x21>; + }; + zl2006@22 { + compatible = "zl2006"; + reg = <0x22>; + }; + zl2006@23 { + compatible = "zl2006"; + reg = <0x23>; + }; + zl2006@24 { + compatible = "zl2006"; + reg = <0x24>; + }; + eeprom@50 { + compatible = "atmel,24c64"; + reg = <0x50>; + }; + eeprom@55 { + compatible = "atmel,24c64"; + reg = <0x55>; + }; + eeprom@56 { + compatible = "atmel,24c64"; + reg = <0x56>; + }; + eeprom@57 { + compatible = "atmel,24c02"; + reg = <0x57>; + }; + }; + + i2c@119100 { + /* 0x6E: ICS9FG108 */ + }; + usb0: usb@210000 { phy_type = "ulpi"; }; diff --git a/arch/powerpc/boot/dts/glacier.dts b/arch/powerpc/boot/dts/glacier.dts index a7a802f4ffdd..e84ff1afb58c 100644 --- a/arch/powerpc/boot/dts/glacier.dts +++ b/arch/powerpc/boot/dts/glacier.dts @@ -489,7 +489,7 @@ interrupt-map = < 0x0 0x0 0x0 0x0 &UIC1 0x0 0x8 >; }; - PCIE0: pciex@d00000000 { + PCIE0: pcie@d00000000 { device_type = "pci"; #interrupt-cells = <1>; #size-cells = <2>; @@ -531,7 +531,7 @@ 0x0 0x0 0x0 0x4 &UIC3 0xf 0x4 /* swizzled int D */>; }; - PCIE1: pciex@d20000000 { + PCIE1: pcie@d20000000 { device_type = "pci"; #interrupt-cells = <1>; #size-cells = <2>; diff --git a/arch/powerpc/boot/dts/haleakala.dts b/arch/powerpc/boot/dts/haleakala.dts index cb16dad43c92..f81ce8786d59 100644 --- a/arch/powerpc/boot/dts/haleakala.dts +++ b/arch/powerpc/boot/dts/haleakala.dts @@ -237,7 +237,7 @@ }; }; - PCIE0: pciex@a0000000 { + PCIE0: pcie@a0000000 { device_type = "pci"; #interrupt-cells = <1>; #size-cells = <2>; diff --git a/arch/powerpc/boot/dts/icon.dts b/arch/powerpc/boot/dts/icon.dts index 2e6e3a7b2604..fbaa60b8f87a 100644 --- a/arch/powerpc/boot/dts/icon.dts +++ b/arch/powerpc/boot/dts/icon.dts @@ -315,7 +315,7 @@ interrupt-map = <0x0 0x0 0x0 0x0 &UIC1 19 0x8>; }; - PCIE0: pciex@d00000000 { + PCIE0: pcie@d00000000 { device_type = "pci"; #interrupt-cells = <1>; #size-cells = <2>; @@ -356,7 +356,7 @@ 0x0 0x0 0x0 0x4 &UIC3 0x3 0x4 /* swizzled int D */>; }; - PCIE1: pciex@d20000000 { + PCIE1: pcie@d20000000 { device_type = "pci"; #interrupt-cells = <1>; #size-cells = <2>; diff --git a/arch/powerpc/boot/dts/katmai.dts b/arch/powerpc/boot/dts/katmai.dts index 02629e119b87..a8f353229fb7 100644 --- a/arch/powerpc/boot/dts/katmai.dts +++ b/arch/powerpc/boot/dts/katmai.dts @@ -319,7 +319,7 @@ >; }; - PCIE0: pciex@d00000000 { + PCIE0: pcie@d00000000 { device_type = "pci"; #interrupt-cells = <1>; #size-cells = <2>; @@ -360,7 +360,7 @@ 0x0 0x0 0x0 0x4 &UIC3 0x3 0x4 /* swizzled int D */>; }; - PCIE1: pciex@d20000000 { + PCIE1: pcie@d20000000 { device_type = "pci"; #interrupt-cells = <1>; #size-cells = <2>; @@ -401,7 +401,7 @@ 0x0 0x0 0x0 0x4 &UIC3 0x7 0x4 /* swizzled int D */>; }; - PCIE2: pciex@d40000000 { + PCIE2: pcie@d40000000 { device_type = "pci"; #interrupt-cells = <1>; #size-cells = <2>; diff --git a/arch/powerpc/boot/dts/kilauea.dts b/arch/powerpc/boot/dts/kilauea.dts index 2a3413221cc1..a709fb47a180 100644 --- a/arch/powerpc/boot/dts/kilauea.dts +++ b/arch/powerpc/boot/dts/kilauea.dts @@ -322,7 +322,7 @@ }; }; - PCIE0: pciex@a0000000 { + PCIE0: pcie@a0000000 { device_type = "pci"; #interrupt-cells = <1>; #size-cells = <2>; @@ -363,7 +363,7 @@ 0x0 0x0 0x0 0x4 &UIC2 0x3 0x4 /* swizzled int D */>; }; - PCIE1: pciex@c0000000 { + PCIE1: pcie@c0000000 { device_type = "pci"; #interrupt-cells = <1>; #size-cells = <2>; diff --git a/arch/powerpc/boot/dts/makalu.dts b/arch/powerpc/boot/dts/makalu.dts index bf8fe1629392..c473cd911bca 100644 --- a/arch/powerpc/boot/dts/makalu.dts +++ b/arch/powerpc/boot/dts/makalu.dts @@ -268,7 +268,7 @@ }; }; - PCIE0: pciex@a0000000 { + PCIE0: pcie@a0000000 { device_type = "pci"; #interrupt-cells = <1>; #size-cells = <2>; @@ -309,7 +309,7 @@ 0x0 0x0 0x0 0x4 &UIC2 0x3 0x4 /* swizzled int D */>; }; - PCIE1: pciex@c0000000 { + PCIE1: pcie@c0000000 { device_type = "pci"; #interrupt-cells = <1>; #size-cells = <2>; diff --git a/arch/powerpc/boot/dts/pcm032.dts b/arch/powerpc/boot/dts/pcm032.dts index c259c6b3ac5a..780e13d99e7b 100644 --- a/arch/powerpc/boot/dts/pcm032.dts +++ b/arch/powerpc/boot/dts/pcm032.dts @@ -3,9 +3,7 @@ * phyCORE-MPC5200B-IO (pcm032) board Device Tree Source * * Copyright (C) 2006-2009 Pengutronix - * Sascha Hauer <s.hauer@pengutronix.de> - * Juergen Beisert <j.beisert@pengutronix.de> - * Wolfram Sang <w.sang@pengutronix.de> + * Sascha Hauer, Juergen Beisert, Wolfram Sang <kernel@pengutronix.de> */ /include/ "mpc5200b.dtsi" diff --git a/arch/powerpc/boot/dts/redwood.dts b/arch/powerpc/boot/dts/redwood.dts index f3e046fb49e2..f38035a1f4a1 100644 --- a/arch/powerpc/boot/dts/redwood.dts +++ b/arch/powerpc/boot/dts/redwood.dts @@ -235,7 +235,7 @@ has-new-stacr-staopc; }; }; - PCIE0: pciex@d00000000 { + PCIE0: pcie@d00000000 { device_type = "pci"; #interrupt-cells = <1>; #size-cells = <2>; @@ -276,7 +276,7 @@ 0x0 0x0 0x0 0x4 &UIC3 0x3 0x4 /* swizzled int D */>; }; - PCIE1: pciex@d20000000 { + PCIE1: pcie@d20000000 { device_type = "pci"; #interrupt-cells = <1>; #size-cells = <2>; @@ -317,7 +317,7 @@ 0x0 0x0 0x0 0x4 &UIC3 0x7 0x4 /* swizzled int D */>; }; - PCIE2: pciex@d40000000 { + PCIE2: pcie@d40000000 { device_type = "pci"; #interrupt-cells = <1>; #size-cells = <2>; diff --git a/arch/powerpc/boot/dts/virtex440-ml507.dts b/arch/powerpc/boot/dts/virtex440-ml507.dts deleted file mode 100644 index 66f1c6312de6..000000000000 --- a/arch/powerpc/boot/dts/virtex440-ml507.dts +++ /dev/null @@ -1,406 +0,0 @@ -/* - * This file supports the Xilinx ML507 board with the 440 processor. - * A reference design for the FPGA is provided at http://git.xilinx.com. - * - * (C) Copyright 2008 Xilinx, Inc. - * - * This file is licensed under the terms of the GNU General Public License - * version 2. This program is licensed "as is" without any warranty of any - * kind, whether express or implied. - * - * --- - * - * Device Tree Generator version: 1.1 - * - * CAUTION: This file is automatically generated by libgen. - * Version: Xilinx EDK 10.1.03 EDK_K_SP3.6 - * - * XPS project directory: ml507_ppc440_emb_ref - */ - -/dts-v1/; - -/ { - #address-cells = <1>; - #size-cells = <1>; - compatible = "xlnx,virtex440"; - dcr-parent = <&ppc440_0>; - model = "testing"; - DDR2_SDRAM: memory@0 { - device_type = "memory"; - reg = < 0 0x10000000 >; - } ; - chosen { - bootargs = "console=ttyS0 root=/dev/ram"; - stdout-path = &RS232_Uart_1; - } ; - cpus { - #address-cells = <1>; - #cpus = <1>; - #size-cells = <0>; - ppc440_0: cpu@0 { - clock-frequency = <400000000>; - compatible = "PowerPC,440", "ibm,ppc440"; - d-cache-line-size = <0x20>; - d-cache-size = <0x8000>; - dcr-access-method = "native"; - dcr-controller ; - device_type = "cpu"; - i-cache-line-size = <0x20>; - i-cache-size = <0x8000>; - model = "PowerPC,440"; - reg = <0>; - timebase-frequency = <400000000>; - xlnx,apu-control = <1>; - xlnx,apu-udi-0 = <0>; - xlnx,apu-udi-1 = <0>; - xlnx,apu-udi-10 = <0>; - xlnx,apu-udi-11 = <0>; - xlnx,apu-udi-12 = <0>; - xlnx,apu-udi-13 = <0>; - xlnx,apu-udi-14 = <0>; - xlnx,apu-udi-15 = <0>; - xlnx,apu-udi-2 = <0>; - xlnx,apu-udi-3 = <0>; - xlnx,apu-udi-4 = <0>; - xlnx,apu-udi-5 = <0>; - xlnx,apu-udi-6 = <0>; - xlnx,apu-udi-7 = <0>; - xlnx,apu-udi-8 = <0>; - xlnx,apu-udi-9 = <0>; - xlnx,dcr-autolock-enable = <1>; - xlnx,dcu-rd-ld-cache-plb-prio = <0>; - xlnx,dcu-rd-noncache-plb-prio = <0>; - xlnx,dcu-rd-touch-plb-prio = <0>; - xlnx,dcu-rd-urgent-plb-prio = <0>; - xlnx,dcu-wr-flush-plb-prio = <0>; - xlnx,dcu-wr-store-plb-prio = <0>; - xlnx,dcu-wr-urgent-plb-prio = <0>; - xlnx,dma0-control = <0>; - xlnx,dma0-plb-prio = <0>; - xlnx,dma0-rxchannelctrl = <0x1010000>; - xlnx,dma0-rxirqtimer = <0x3ff>; - xlnx,dma0-txchannelctrl = <0x1010000>; - xlnx,dma0-txirqtimer = <0x3ff>; - xlnx,dma1-control = <0>; - xlnx,dma1-plb-prio = <0>; - xlnx,dma1-rxchannelctrl = <0x1010000>; - xlnx,dma1-rxirqtimer = <0x3ff>; - xlnx,dma1-txchannelctrl = <0x1010000>; - xlnx,dma1-txirqtimer = <0x3ff>; - xlnx,dma2-control = <0>; - xlnx,dma2-plb-prio = <0>; - xlnx,dma2-rxchannelctrl = <0x1010000>; - xlnx,dma2-rxirqtimer = <0x3ff>; - xlnx,dma2-txchannelctrl = <0x1010000>; - xlnx,dma2-txirqtimer = <0x3ff>; - xlnx,dma3-control = <0>; - xlnx,dma3-plb-prio = <0>; - xlnx,dma3-rxchannelctrl = <0x1010000>; - xlnx,dma3-rxirqtimer = <0x3ff>; - xlnx,dma3-txchannelctrl = <0x1010000>; - xlnx,dma3-txirqtimer = <0x3ff>; - xlnx,endian-reset = <0>; - xlnx,generate-plb-timespecs = <1>; - xlnx,icu-rd-fetch-plb-prio = <0>; - xlnx,icu-rd-spec-plb-prio = <0>; - xlnx,icu-rd-touch-plb-prio = <0>; - xlnx,interconnect-imask = <0xffffffff>; - xlnx,mplb-allow-lock-xfer = <1>; - xlnx,mplb-arb-mode = <0>; - xlnx,mplb-awidth = <0x20>; - xlnx,mplb-counter = <0x500>; - xlnx,mplb-dwidth = <0x80>; - xlnx,mplb-max-burst = <8>; - xlnx,mplb-native-dwidth = <0x80>; - xlnx,mplb-p2p = <0>; - xlnx,mplb-prio-dcur = <2>; - xlnx,mplb-prio-dcuw = <3>; - xlnx,mplb-prio-icu = <4>; - xlnx,mplb-prio-splb0 = <1>; - xlnx,mplb-prio-splb1 = <0>; - xlnx,mplb-read-pipe-enable = <1>; - xlnx,mplb-sync-tattribute = <0>; - xlnx,mplb-wdog-enable = <1>; - xlnx,mplb-write-pipe-enable = <1>; - xlnx,mplb-write-post-enable = <1>; - xlnx,num-dma = <1>; - xlnx,pir = <0xf>; - xlnx,ppc440mc-addr-base = <0>; - xlnx,ppc440mc-addr-high = <0xfffffff>; - xlnx,ppc440mc-arb-mode = <0>; - xlnx,ppc440mc-bank-conflict-mask = <0xc00000>; - xlnx,ppc440mc-control = <0xf810008f>; - xlnx,ppc440mc-max-burst = <8>; - xlnx,ppc440mc-prio-dcur = <2>; - xlnx,ppc440mc-prio-dcuw = <3>; - xlnx,ppc440mc-prio-icu = <4>; - xlnx,ppc440mc-prio-splb0 = <1>; - xlnx,ppc440mc-prio-splb1 = <0>; - xlnx,ppc440mc-row-conflict-mask = <0x3ffe00>; - xlnx,ppcdm-asyncmode = <0>; - xlnx,ppcds-asyncmode = <0>; - xlnx,user-reset = <0>; - DMA0: sdma@80 { - compatible = "xlnx,ll-dma-1.00.a"; - dcr-reg = < 0x80 0x11 >; - interrupt-parent = <&xps_intc_0>; - interrupts = < 10 2 11 2 >; - } ; - } ; - } ; - plb_v46_0: plb@0 { - #address-cells = <1>; - #size-cells = <1>; - compatible = "xlnx,plb-v46-1.03.a", "simple-bus"; - ranges ; - DIP_Switches_8Bit: gpio@81460000 { - compatible = "xlnx,xps-gpio-1.00.a"; - interrupt-parent = <&xps_intc_0>; - interrupts = < 7 2 >; - reg = < 0x81460000 0x10000 >; - xlnx,all-inputs = <1>; - xlnx,all-inputs-2 = <0>; - xlnx,dout-default = <0>; - xlnx,dout-default-2 = <0>; - xlnx,family = "virtex5"; - xlnx,gpio-width = <8>; - xlnx,interrupt-present = <1>; - xlnx,is-bidir = <1>; - xlnx,is-bidir-2 = <1>; - xlnx,is-dual = <0>; - xlnx,tri-default = <0xffffffff>; - xlnx,tri-default-2 = <0xffffffff>; - } ; - FLASH: flash@fc000000 { - bank-width = <2>; - compatible = "xlnx,xps-mch-emc-2.00.a", "cfi-flash"; - reg = < 0xfc000000 0x2000000 >; - xlnx,family = "virtex5"; - xlnx,include-datawidth-matching-0 = <0x1>; - xlnx,include-datawidth-matching-1 = <0x0>; - xlnx,include-datawidth-matching-2 = <0x0>; - xlnx,include-datawidth-matching-3 = <0x0>; - xlnx,include-negedge-ioregs = <0x0>; - xlnx,include-plb-ipif = <0x1>; - xlnx,include-wrbuf = <0x1>; - xlnx,max-mem-width = <0x10>; - xlnx,mch-native-dwidth = <0x20>; - xlnx,mch-plb-clk-period-ps = <0x2710>; - xlnx,mch-splb-awidth = <0x20>; - xlnx,mch0-accessbuf-depth = <0x10>; - xlnx,mch0-protocol = <0x0>; - xlnx,mch0-rddatabuf-depth = <0x10>; - xlnx,mch1-accessbuf-depth = <0x10>; - xlnx,mch1-protocol = <0x0>; - xlnx,mch1-rddatabuf-depth = <0x10>; - xlnx,mch2-accessbuf-depth = <0x10>; - xlnx,mch2-protocol = <0x0>; - xlnx,mch2-rddatabuf-depth = <0x10>; - xlnx,mch3-accessbuf-depth = <0x10>; - xlnx,mch3-protocol = <0x0>; - xlnx,mch3-rddatabuf-depth = <0x10>; - xlnx,mem0-width = <0x10>; - xlnx,mem1-width = <0x20>; - xlnx,mem2-width = <0x20>; - xlnx,mem3-width = <0x20>; - xlnx,num-banks-mem = <0x1>; - xlnx,num-channels = <0x2>; - xlnx,priority-mode = <0x0>; - xlnx,synch-mem-0 = <0x0>; - xlnx,synch-mem-1 = <0x0>; - xlnx,synch-mem-2 = <0x0>; - xlnx,synch-mem-3 = <0x0>; - xlnx,synch-pipedelay-0 = <0x2>; - xlnx,synch-pipedelay-1 = <0x2>; - xlnx,synch-pipedelay-2 = <0x2>; - xlnx,synch-pipedelay-3 = <0x2>; - xlnx,tavdv-ps-mem-0 = <0x1adb0>; - xlnx,tavdv-ps-mem-1 = <0x3a98>; - xlnx,tavdv-ps-mem-2 = <0x3a98>; - xlnx,tavdv-ps-mem-3 = <0x3a98>; - xlnx,tcedv-ps-mem-0 = <0x1adb0>; - xlnx,tcedv-ps-mem-1 = <0x3a98>; - xlnx,tcedv-ps-mem-2 = <0x3a98>; - xlnx,tcedv-ps-mem-3 = <0x3a98>; - xlnx,thzce-ps-mem-0 = <0x88b8>; - xlnx,thzce-ps-mem-1 = <0x1b58>; - xlnx,thzce-ps-mem-2 = <0x1b58>; - xlnx,thzce-ps-mem-3 = <0x1b58>; - xlnx,thzoe-ps-mem-0 = <0x1b58>; - xlnx,thzoe-ps-mem-1 = <0x1b58>; - xlnx,thzoe-ps-mem-2 = <0x1b58>; - xlnx,thzoe-ps-mem-3 = <0x1b58>; - xlnx,tlzwe-ps-mem-0 = <0x88b8>; - xlnx,tlzwe-ps-mem-1 = <0x0>; - xlnx,tlzwe-ps-mem-2 = <0x0>; - xlnx,tlzwe-ps-mem-3 = <0x0>; - xlnx,twc-ps-mem-0 = <0x2af8>; - xlnx,twc-ps-mem-1 = <0x3a98>; - xlnx,twc-ps-mem-2 = <0x3a98>; - xlnx,twc-ps-mem-3 = <0x3a98>; - xlnx,twp-ps-mem-0 = <0x11170>; - xlnx,twp-ps-mem-1 = <0x2ee0>; - xlnx,twp-ps-mem-2 = <0x2ee0>; - xlnx,twp-ps-mem-3 = <0x2ee0>; - xlnx,xcl0-linesize = <0x4>; - xlnx,xcl0-writexfer = <0x1>; - xlnx,xcl1-linesize = <0x4>; - xlnx,xcl1-writexfer = <0x1>; - xlnx,xcl2-linesize = <0x4>; - xlnx,xcl2-writexfer = <0x1>; - xlnx,xcl3-linesize = <0x4>; - xlnx,xcl3-writexfer = <0x1>; - } ; - Hard_Ethernet_MAC: xps-ll-temac@81c00000 { - #address-cells = <1>; - #size-cells = <1>; - compatible = "xlnx,compound"; - ethernet@81c00000 { - #address-cells = <1>; - #size-cells = <0>; - compatible = "xlnx,xps-ll-temac-1.01.b"; - device_type = "network"; - interrupt-parent = <&xps_intc_0>; - interrupts = < 5 2 >; - llink-connected = <&DMA0>; - local-mac-address = [ 02 00 00 00 00 00 ]; - reg = < 0x81c00000 0x40 >; - xlnx,bus2core-clk-ratio = <1>; - xlnx,phy-type = <1>; - xlnx,phyaddr = <1>; - xlnx,rxcsum = <1>; - xlnx,rxfifo = <0x1000>; - xlnx,temac-type = <0>; - xlnx,txcsum = <1>; - xlnx,txfifo = <0x1000>; - phy-handle = <&phy7>; - clock-frequency = <100000000>; - phy7: phy@7 { - compatible = "marvell,88e1111"; - reg = <7>; - } ; - } ; - } ; - IIC_EEPROM: i2c@81600000 { - compatible = "xlnx,xps-iic-2.00.a"; - interrupt-parent = <&xps_intc_0>; - interrupts = < 6 2 >; - reg = < 0x81600000 0x10000 >; - xlnx,clk-freq = <0x5f5e100>; - xlnx,family = "virtex5"; - xlnx,gpo-width = <0x1>; - xlnx,iic-freq = <0x186a0>; - xlnx,scl-inertial-delay = <0x0>; - xlnx,sda-inertial-delay = <0x0>; - xlnx,ten-bit-adr = <0x0>; - } ; - LEDs_8Bit: gpio@81400000 { - compatible = "xlnx,xps-gpio-1.00.a"; - reg = < 0x81400000 0x10000 >; - xlnx,all-inputs = <0>; - xlnx,all-inputs-2 = <0>; - xlnx,dout-default = <0>; - xlnx,dout-default-2 = <0>; - xlnx,family = "virtex5"; - xlnx,gpio-width = <8>; - xlnx,interrupt-present = <0>; - xlnx,is-bidir = <1>; - xlnx,is-bidir-2 = <1>; - xlnx,is-dual = <0>; - xlnx,tri-default = <0xffffffff>; - xlnx,tri-default-2 = <0xffffffff>; - } ; - LEDs_Positions: gpio@81420000 { - compatible = "xlnx,xps-gpio-1.00.a"; - reg = < 0x81420000 0x10000 >; - xlnx,all-inputs = <0>; - xlnx,all-inputs-2 = <0>; - xlnx,dout-default = <0>; - xlnx,dout-default-2 = <0>; - xlnx,family = "virtex5"; - xlnx,gpio-width = <5>; - xlnx,interrupt-present = <0>; - xlnx,is-bidir = <1>; - xlnx,is-bidir-2 = <1>; - xlnx,is-dual = <0>; - xlnx,tri-default = <0xffffffff>; - xlnx,tri-default-2 = <0xffffffff>; - } ; - Push_Buttons_5Bit: gpio@81440000 { - compatible = "xlnx,xps-gpio-1.00.a"; - interrupt-parent = <&xps_intc_0>; - interrupts = < 8 2 >; - reg = < 0x81440000 0x10000 >; - xlnx,all-inputs = <1>; - xlnx,all-inputs-2 = <0>; - xlnx,dout-default = <0>; - xlnx,dout-default-2 = <0>; - xlnx,family = "virtex5"; - xlnx,gpio-width = <5>; - xlnx,interrupt-present = <1>; - xlnx,is-bidir = <1>; - xlnx,is-bidir-2 = <1>; - xlnx,is-dual = <0>; - xlnx,tri-default = <0xffffffff>; - xlnx,tri-default-2 = <0xffffffff>; - } ; - RS232_Uart_1: serial@83e00000 { - clock-frequency = <100000000>; - compatible = "xlnx,xps-uart16550-2.00.b", "ns16550"; - current-speed = <9600>; - device_type = "serial"; - interrupt-parent = <&xps_intc_0>; - interrupts = < 9 2 >; - reg = < 0x83e00000 0x10000 >; - reg-offset = <0x1003>; - reg-shift = <2>; - xlnx,family = "virtex5"; - xlnx,has-external-rclk = <0>; - xlnx,has-external-xin = <0>; - xlnx,is-a-16550 = <1>; - } ; - SysACE_CompactFlash: sysace@83600000 { - compatible = "xlnx,xps-sysace-1.00.a"; - interrupt-parent = <&xps_intc_0>; - interrupts = < 4 2 >; - reg = < 0x83600000 0x10000 >; - xlnx,family = "virtex5"; - xlnx,mem-width = <0x10>; - } ; - xps_bram_if_cntlr_1: xps-bram-if-cntlr@ffff0000 { - compatible = "xlnx,xps-bram-if-cntlr-1.00.a"; - reg = < 0xffff0000 0x10000 >; - xlnx,family = "virtex5"; - } ; - xps_intc_0: interrupt-controller@81800000 { - #interrupt-cells = <2>; - compatible = "xlnx,xps-intc-1.00.a"; - interrupt-controller ; - reg = < 0x81800000 0x10000 >; - xlnx,num-intr-inputs = <0xc>; - } ; - xps_timebase_wdt_1: xps-timebase-wdt@83a00000 { - compatible = "xlnx,xps-timebase-wdt-1.00.b"; - interrupt-parent = <&xps_intc_0>; - interrupts = < 2 0 1 2 >; - reg = < 0x83a00000 0x10000 >; - xlnx,family = "virtex5"; - xlnx,wdt-enable-once = <0>; - xlnx,wdt-interval = <0x1e>; - } ; - xps_timer_1: timer@83c00000 { - compatible = "xlnx,xps-timer-1.00.a"; - interrupt-parent = <&xps_intc_0>; - interrupts = < 3 2 >; - reg = < 0x83c00000 0x10000 >; - xlnx,count-width = <0x20>; - xlnx,family = "virtex5"; - xlnx,gen0-assert = <1>; - xlnx,gen1-assert = <1>; - xlnx,one-timer-only = <1>; - xlnx,trig0-assert = <1>; - xlnx,trig1-assert = <1>; - } ; - } ; -} ; diff --git a/arch/powerpc/boot/dts/virtex440-ml510.dts b/arch/powerpc/boot/dts/virtex440-ml510.dts deleted file mode 100644 index 3b736ca26ddc..000000000000 --- a/arch/powerpc/boot/dts/virtex440-ml510.dts +++ /dev/null @@ -1,466 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0 -/* - * Xilinx ML510 Reference Design support - * - * This DTS file was created for the ml510_bsb1_pcores_ppc440 reference design. - * The reference design contains a bug which prevent PCI DMA from working - * properly. A description of the bug is given in the plbv46_pci section. It - * needs to be fixed by the user until Xilinx updates their reference design. - * - * Copyright 2009, Roderick Colenbrander - */ - -/dts-v1/; -/ { - #address-cells = <1>; - #size-cells = <1>; - compatible = "xlnx,ml510-ref-design", "xlnx,virtex440"; - dcr-parent = <&ppc440_0>; - DDR2_SDRAM_DIMM0: memory@0 { - device_type = "memory"; - reg = < 0x0 0x20000000 >; - } ; - alias { - ethernet0 = &Hard_Ethernet_MAC; - serial0 = &RS232_Uart_1; - } ; - chosen { - bootargs = "console=ttyS0 root=/dev/ram"; - stdout-path = "/plb@0/serial@83e00000"; - } ; - cpus { - #address-cells = <1>; - #cpus = <0x1>; - #size-cells = <0>; - ppc440_0: cpu@0 { - #address-cells = <1>; - #size-cells = <1>; - clock-frequency = <300000000>; - compatible = "PowerPC,440", "ibm,ppc440"; - d-cache-line-size = <0x20>; - d-cache-size = <0x8000>; - dcr-access-method = "native"; - dcr-controller ; - device_type = "cpu"; - i-cache-line-size = <0x20>; - i-cache-size = <0x8000>; - model = "PowerPC,440"; - reg = <0>; - timebase-frequency = <300000000>; - xlnx,apu-control = <0x2000>; - xlnx,apu-udi-0 = <0x0>; - xlnx,apu-udi-1 = <0x0>; - xlnx,apu-udi-10 = <0x0>; - xlnx,apu-udi-11 = <0x0>; - xlnx,apu-udi-12 = <0x0>; - xlnx,apu-udi-13 = <0x0>; - xlnx,apu-udi-14 = <0x0>; - xlnx,apu-udi-15 = <0x0>; - xlnx,apu-udi-2 = <0x0>; - xlnx,apu-udi-3 = <0x0>; - xlnx,apu-udi-4 = <0x0>; - xlnx,apu-udi-5 = <0x0>; - xlnx,apu-udi-6 = <0x0>; - xlnx,apu-udi-7 = <0x0>; - xlnx,apu-udi-8 = <0x0>; - xlnx,apu-udi-9 = <0x0>; - xlnx,dcr-autolock-enable = <0x1>; - xlnx,dcu-rd-ld-cache-plb-prio = <0x0>; - xlnx,dcu-rd-noncache-plb-prio = <0x0>; - xlnx,dcu-rd-touch-plb-prio = <0x0>; - xlnx,dcu-rd-urgent-plb-prio = <0x0>; - xlnx,dcu-wr-flush-plb-prio = <0x0>; - xlnx,dcu-wr-store-plb-prio = <0x0>; - xlnx,dcu-wr-urgent-plb-prio = <0x0>; - xlnx,dma0-control = <0x0>; - xlnx,dma0-plb-prio = <0x0>; - xlnx,dma0-rxchannelctrl = <0x1010000>; - xlnx,dma0-rxirqtimer = <0x3ff>; - xlnx,dma0-txchannelctrl = <0x1010000>; - xlnx,dma0-txirqtimer = <0x3ff>; - xlnx,dma1-control = <0x0>; - xlnx,dma1-plb-prio = <0x0>; - xlnx,dma1-rxchannelctrl = <0x1010000>; - xlnx,dma1-rxirqtimer = <0x3ff>; - xlnx,dma1-txchannelctrl = <0x1010000>; - xlnx,dma1-txirqtimer = <0x3ff>; - xlnx,dma2-control = <0x0>; - xlnx,dma2-plb-prio = <0x0>; - xlnx,dma2-rxchannelctrl = <0x1010000>; - xlnx,dma2-rxirqtimer = <0x3ff>; - xlnx,dma2-txchannelctrl = <0x1010000>; - xlnx,dma2-txirqtimer = <0x3ff>; - xlnx,dma3-control = <0x0>; - xlnx,dma3-plb-prio = <0x0>; - xlnx,dma3-rxchannelctrl = <0x1010000>; - xlnx,dma3-rxirqtimer = <0x3ff>; - xlnx,dma3-txchannelctrl = <0x1010000>; - xlnx,dma3-txirqtimer = <0x3ff>; - xlnx,endian-reset = <0x0>; - xlnx,generate-plb-timespecs = <0x1>; - xlnx,icu-rd-fetch-plb-prio = <0x0>; - xlnx,icu-rd-spec-plb-prio = <0x0>; - xlnx,icu-rd-touch-plb-prio = <0x0>; - xlnx,interconnect-imask = <0xffffffff>; - xlnx,mplb-allow-lock-xfer = <0x1>; - xlnx,mplb-arb-mode = <0x0>; - xlnx,mplb-awidth = <0x20>; - xlnx,mplb-counter = <0x500>; - xlnx,mplb-dwidth = <0x80>; - xlnx,mplb-max-burst = <0x8>; - xlnx,mplb-native-dwidth = <0x80>; - xlnx,mplb-p2p = <0x0>; - xlnx,mplb-prio-dcur = <0x2>; - xlnx,mplb-prio-dcuw = <0x3>; - xlnx,mplb-prio-icu = <0x4>; - xlnx,mplb-prio-splb0 = <0x1>; - xlnx,mplb-prio-splb1 = <0x0>; - xlnx,mplb-read-pipe-enable = <0x1>; - xlnx,mplb-sync-tattribute = <0x0>; - xlnx,mplb-wdog-enable = <0x1>; - xlnx,mplb-write-pipe-enable = <0x1>; - xlnx,mplb-write-post-enable = <0x1>; - xlnx,num-dma = <0x0>; - xlnx,pir = <0xf>; - xlnx,ppc440mc-addr-base = <0x0>; - xlnx,ppc440mc-addr-high = <0x1fffffff>; - xlnx,ppc440mc-arb-mode = <0x0>; - xlnx,ppc440mc-bank-conflict-mask = <0x1800000>; - xlnx,ppc440mc-control = <0xf810008f>; - xlnx,ppc440mc-max-burst = <0x8>; - xlnx,ppc440mc-prio-dcur = <0x2>; - xlnx,ppc440mc-prio-dcuw = <0x3>; - xlnx,ppc440mc-prio-icu = <0x4>; - xlnx,ppc440mc-prio-splb0 = <0x1>; - xlnx,ppc440mc-prio-splb1 = <0x0>; - xlnx,ppc440mc-row-conflict-mask = <0x7ffe00>; - xlnx,ppcdm-asyncmode = <0x0>; - xlnx,ppcds-asyncmode = <0x0>; - xlnx,user-reset = <0x0>; - } ; - } ; - plb_v46_0: plb@0 { - #address-cells = <1>; - #size-cells = <1>; - compatible = "xlnx,plb-v46-1.03.a", "simple-bus"; - ranges ; - FLASH: flash@fc000000 { - bank-width = <2>; - compatible = "xlnx,xps-mch-emc-2.00.a", "cfi-flash"; - reg = < 0xfc000000 0x2000000 >; - xlnx,family = "virtex5"; - xlnx,include-datawidth-matching-0 = <0x1>; - xlnx,include-datawidth-matching-1 = <0x0>; - xlnx,include-datawidth-matching-2 = <0x0>; - xlnx,include-datawidth-matching-3 = <0x0>; - xlnx,include-negedge-ioregs = <0x0>; - xlnx,include-plb-ipif = <0x1>; - xlnx,include-wrbuf = <0x1>; - xlnx,max-mem-width = <0x10>; - xlnx,mch-native-dwidth = <0x20>; - xlnx,mch-plb-clk-period-ps = <0x2710>; - xlnx,mch-splb-awidth = <0x20>; - xlnx,mch0-accessbuf-depth = <0x10>; - xlnx,mch0-protocol = <0x0>; - xlnx,mch0-rddatabuf-depth = <0x10>; - xlnx,mch1-accessbuf-depth = <0x10>; - xlnx,mch1-protocol = <0x0>; - xlnx,mch1-rddatabuf-depth = <0x10>; - xlnx,mch2-accessbuf-depth = <0x10>; - xlnx,mch2-protocol = <0x0>; - xlnx,mch2-rddatabuf-depth = <0x10>; - xlnx,mch3-accessbuf-depth = <0x10>; - xlnx,mch3-protocol = <0x0>; - xlnx,mch3-rddatabuf-depth = <0x10>; - xlnx,mem0-width = <0x10>; - xlnx,mem1-width = <0x20>; - xlnx,mem2-width = <0x20>; - xlnx,mem3-width = <0x20>; - xlnx,num-banks-mem = <0x1>; - xlnx,num-channels = <0x2>; - xlnx,priority-mode = <0x0>; - xlnx,synch-mem-0 = <0x0>; - xlnx,synch-mem-1 = <0x0>; - xlnx,synch-mem-2 = <0x0>; - xlnx,synch-mem-3 = <0x0>; - xlnx,synch-pipedelay-0 = <0x2>; - xlnx,synch-pipedelay-1 = <0x2>; - xlnx,synch-pipedelay-2 = <0x2>; - xlnx,synch-pipedelay-3 = <0x2>; - xlnx,tavdv-ps-mem-0 = <0x1adb0>; - xlnx,tavdv-ps-mem-1 = <0x3a98>; - xlnx,tavdv-ps-mem-2 = <0x3a98>; - xlnx,tavdv-ps-mem-3 = <0x3a98>; - xlnx,tcedv-ps-mem-0 = <0x1adb0>; - xlnx,tcedv-ps-mem-1 = <0x3a98>; - xlnx,tcedv-ps-mem-2 = <0x3a98>; - xlnx,tcedv-ps-mem-3 = <0x3a98>; - xlnx,thzce-ps-mem-0 = <0x88b8>; - xlnx,thzce-ps-mem-1 = <0x1b58>; - xlnx,thzce-ps-mem-2 = <0x1b58>; - xlnx,thzce-ps-mem-3 = <0x1b58>; - xlnx,thzoe-ps-mem-0 = <0x1b58>; - xlnx,thzoe-ps-mem-1 = <0x1b58>; - xlnx,thzoe-ps-mem-2 = <0x1b58>; - xlnx,thzoe-ps-mem-3 = <0x1b58>; - xlnx,tlzwe-ps-mem-0 = <0x88b8>; - xlnx,tlzwe-ps-mem-1 = <0x0>; - xlnx,tlzwe-ps-mem-2 = <0x0>; - xlnx,tlzwe-ps-mem-3 = <0x0>; - xlnx,twc-ps-mem-0 = <0x1adb0>; - xlnx,twc-ps-mem-1 = <0x3a98>; - xlnx,twc-ps-mem-2 = <0x3a98>; - xlnx,twc-ps-mem-3 = <0x3a98>; - xlnx,twp-ps-mem-0 = <0x11170>; - xlnx,twp-ps-mem-1 = <0x2ee0>; - xlnx,twp-ps-mem-2 = <0x2ee0>; - xlnx,twp-ps-mem-3 = <0x2ee0>; - xlnx,xcl0-linesize = <0x4>; - xlnx,xcl0-writexfer = <0x1>; - xlnx,xcl1-linesize = <0x4>; - xlnx,xcl1-writexfer = <0x1>; - xlnx,xcl2-linesize = <0x4>; - xlnx,xcl2-writexfer = <0x1>; - xlnx,xcl3-linesize = <0x4>; - xlnx,xcl3-writexfer = <0x1>; - } ; - Hard_Ethernet_MAC: xps-ll-temac@81c00000 { - #address-cells = <1>; - #size-cells = <1>; - compatible = "xlnx,compound"; - ethernet@81c00000 { - compatible = "xlnx,xps-ll-temac-1.01.b"; - device_type = "network"; - interrupt-parent = <&xps_intc_0>; - interrupts = < 8 2 >; - llink-connected = <&Hard_Ethernet_MAC_fifo>; - local-mac-address = [ 02 00 00 00 00 00 ]; - reg = < 0x81c00000 0x40 >; - xlnx,bus2core-clk-ratio = <0x1>; - xlnx,phy-type = <0x3>; - xlnx,phyaddr = <0x1>; - xlnx,rxcsum = <0x0>; - xlnx,rxfifo = <0x8000>; - xlnx,temac-type = <0x0>; - xlnx,txcsum = <0x0>; - xlnx,txfifo = <0x8000>; - } ; - } ; - Hard_Ethernet_MAC_fifo: xps-ll-fifo@81a00000 { - compatible = "xlnx,xps-ll-fifo-1.01.a"; - interrupt-parent = <&xps_intc_0>; - interrupts = < 6 2 >; - reg = < 0x81a00000 0x10000 >; - xlnx,family = "virtex5"; - } ; - IIC_EEPROM: i2c@81600000 { - compatible = "xlnx,xps-iic-2.00.a"; - interrupt-parent = <&xps_intc_0>; - interrupts = < 9 2 >; - reg = < 0x81600000 0x10000 >; - xlnx,clk-freq = <0x5f5e100>; - xlnx,family = "virtex5"; - xlnx,gpo-width = <0x1>; - xlnx,iic-freq = <0x186a0>; - xlnx,scl-inertial-delay = <0x5>; - xlnx,sda-inertial-delay = <0x5>; - xlnx,ten-bit-adr = <0x0>; - } ; - LCD_OPTIONAL: gpio@81420000 { - compatible = "xlnx,xps-gpio-1.00.a"; - reg = < 0x81420000 0x10000 >; - xlnx,all-inputs = <0x0>; - xlnx,all-inputs-2 = <0x0>; - xlnx,dout-default = <0x0>; - xlnx,dout-default-2 = <0x0>; - xlnx,family = "virtex5"; - xlnx,gpio-width = <0xb>; - xlnx,interrupt-present = <0x0>; - xlnx,is-bidir = <0x1>; - xlnx,is-bidir-2 = <0x1>; - xlnx,is-dual = <0x0>; - xlnx,tri-default = <0xffffffff>; - xlnx,tri-default-2 = <0xffffffff>; - } ; - LEDs_4Bit: gpio@81400000 { - compatible = "xlnx,xps-gpio-1.00.a"; - reg = < 0x81400000 0x10000 >; - xlnx,all-inputs = <0x0>; - xlnx,all-inputs-2 = <0x0>; - xlnx,dout-default = <0x0>; - xlnx,dout-default-2 = <0x0>; - xlnx,family = "virtex5"; - xlnx,gpio-width = <0x4>; - xlnx,interrupt-present = <0x0>; - xlnx,is-bidir = <0x1>; - xlnx,is-bidir-2 = <0x1>; - xlnx,is-dual = <0x0>; - xlnx,tri-default = <0xffffffff>; - xlnx,tri-default-2 = <0xffffffff>; - } ; - RS232_Uart_1: serial@83e00000 { - clock-frequency = <100000000>; - compatible = "xlnx,xps-uart16550-2.00.b", "ns16550"; - current-speed = <9600>; - device_type = "serial"; - interrupt-parent = <&xps_intc_0>; - interrupts = < 11 2 >; - reg = < 0x83e00000 0x10000 >; - reg-offset = <0x1003>; - reg-shift = <2>; - xlnx,family = "virtex5"; - xlnx,has-external-rclk = <0x0>; - xlnx,has-external-xin = <0x0>; - xlnx,is-a-16550 = <0x1>; - } ; - SPI_EEPROM: xps-spi@feff8000 { - compatible = "xlnx,xps-spi-2.00.b"; - interrupt-parent = <&xps_intc_0>; - interrupts = < 10 2 >; - reg = < 0xfeff8000 0x80 >; - xlnx,family = "virtex5"; - xlnx,fifo-exist = <0x1>; - xlnx,num-ss-bits = <0x1>; - xlnx,num-transfer-bits = <0x8>; - xlnx,sck-ratio = <0x80>; - } ; - SysACE_CompactFlash: sysace@83600000 { - compatible = "xlnx,xps-sysace-1.00.a"; - interrupt-parent = <&xps_intc_0>; - interrupts = < 7 2 >; - reg = < 0x83600000 0x10000 >; - xlnx,family = "virtex5"; - xlnx,mem-width = <0x10>; - } ; - plbv46_pci_0: plbv46-pci@85e00000 { - #size-cells = <2>; - #address-cells = <3>; - compatible = "xlnx,plbv46-pci-1.03.a"; - device_type = "pci"; - reg = < 0x85e00000 0x10000 >; - - /* - * The default ML510 BSB has C_IPIFBAR2PCIBAR_0 set to - * 0 which means that a read/write to the memory mapped - * i/o region (which starts at 0xa0000000) for pci - * bar 0 on the plb side translates to 0. - * It is important to set this value to 0xa0000000, so - * that inbound and outbound pci transactions work - * properly including DMA. - */ - ranges = <0x02000000 0 0xa0000000 0xa0000000 0 0x20000000 - 0x01000000 0 0x00000000 0xf0000000 0 0x00010000>; - - #interrupt-cells = <1>; - interrupt-parent = <&xps_intc_0>; - interrupt-map-mask = <0xff00 0x0 0x0 0x7>; - interrupt-map = < - /* IRQ mapping for pci slots and ALI M1533 - * periperhals. In total there are 5 interrupt - * lines connected to a xps_intc controller. - * Four of them are PCI IRQ A, B, C, D and - * which correspond to respectively xpx_intc - * 5, 4, 3 and 2. The fifth interrupt line is - * connected to the south bridge and this one - * uses irq 1 and is active high instead of - * active low. - * - * The M1533 contains various peripherals - * including AC97 audio, a modem, USB, IDE and - * some power management stuff. The modem - * isn't connected on the ML510 and the power - * management core also isn't used. - */ - - /* IDSEL 0x16 / dev=6, bus=0 / PCI slot 3 */ - 0x3000 0 0 1 &xps_intc_0 3 2 - 0x3000 0 0 2 &xps_intc_0 2 2 - 0x3000 0 0 3 &xps_intc_0 5 2 - 0x3000 0 0 4 &xps_intc_0 4 2 - - /* IDSEL 0x13 / dev=3, bus=1 / PCI slot 4 */ - /* - 0x11800 0 0 1 &xps_intc_0 5 0 2 - 0x11800 0 0 2 &xps_intc_0 4 0 2 - 0x11800 0 0 3 &xps_intc_0 3 0 2 - 0x11800 0 0 4 &xps_intc_0 2 0 2 - */ - - /* According to the datasheet + schematic - * ABCD [FPGA] of slot 5 is mapped to DABC. - * Testing showed that at least A maps to B, - * the mapping of the other pins is a guess - * and for that reason the lines have been - * commented out. - */ - /* IDSEL 0x15 / dev=5, bus=0 / PCI slot 5 */ - 0x2800 0 0 1 &xps_intc_0 4 2 - /* - 0x2800 0 0 2 &xps_intc_0 3 2 - 0x2800 0 0 3 &xps_intc_0 2 2 - 0x2800 0 0 4 &xps_intc_0 5 2 - */ - - /* IDSEL 0x12 / dev=2, bus=1 / PCI slot 6 */ - /* - 0x11000 0 0 1 &xps_intc_0 4 0 2 - 0x11000 0 0 2 &xps_intc_0 3 0 2 - 0x11000 0 0 3 &xps_intc_0 2 0 2 - 0x11000 0 0 4 &xps_intc_0 5 0 2 - */ - - /* IDSEL 0x11 / dev=1, bus=0 / AC97 audio */ - 0x0800 0 0 1 &i8259 7 2 - - /* IDSEL 0x1b / dev=11, bus=0 / IDE */ - 0x5800 0 0 1 &i8259 14 2 - - /* IDSEL 0x1f / dev 15, bus=0 / 2x USB 1.1 */ - 0x7800 0 0 1 &i8259 7 2 - >; - ali_m1533 { - #size-cells = <1>; - #address-cells = <2>; - i8259: interrupt-controller@20 { - reg = <1 0x20 2 - 1 0xa0 2 - 1 0x4d0 2>; - interrupt-controller; - device_type = "interrupt-controller"; - #address-cells = <0>; - #interrupt-cells = <2>; - compatible = "chrp,iic"; - - /* south bridge irq is active high */ - interrupts = <1 3>; - interrupt-parent = <&xps_intc_0>; - }; - }; - } ; - xps_bram_if_cntlr_1: xps-bram-if-cntlr@ffff0000 { - compatible = "xlnx,xps-bram-if-cntlr-1.00.a"; - reg = < 0xffff0000 0x10000 >; - xlnx,family = "virtex5"; - } ; - xps_intc_0: interrupt-controller@81800000 { - #interrupt-cells = <0x2>; - compatible = "xlnx,xps-intc-1.00.a"; - interrupt-controller ; - reg = < 0x81800000 0x10000 >; - xlnx,num-intr-inputs = <0xc>; - } ; - xps_tft_0: tft@86e00000 { - compatible = "xlnx,xps-tft-1.00.a"; - reg = < 0x86e00000 0x10000 >; - xlnx,dcr-splb-slave-if = <0x1>; - xlnx,default-tft-base-addr = <0x0>; - xlnx,family = "virtex5"; - xlnx,i2c-slave-addr = <0x76>; - xlnx,mplb-awidth = <0x20>; - xlnx,mplb-dwidth = <0x80>; - xlnx,mplb-native-dwidth = <0x40>; - xlnx,mplb-smallest-slave = <0x20>; - xlnx,tft-interface = <0x1>; - } ; - } ; -} ; diff --git a/arch/powerpc/boot/dts/walnut.dts b/arch/powerpc/boot/dts/walnut.dts deleted file mode 100644 index 0872862c9363..000000000000 --- a/arch/powerpc/boot/dts/walnut.dts +++ /dev/null @@ -1,246 +0,0 @@ -/* - * Device Tree Source for IBM Walnut - * - * Copyright 2007 IBM Corp. - * Josh Boyer <jwboyer@linux.vnet.ibm.com> - * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without - * any warranty of any kind, whether express or implied. - */ - -/dts-v1/; - -/ { - #address-cells = <1>; - #size-cells = <1>; - model = "ibm,walnut"; - compatible = "ibm,walnut"; - dcr-parent = <&{/cpus/cpu@0}>; - - aliases { - ethernet0 = &EMAC; - serial0 = &UART0; - serial1 = &UART1; - }; - - cpus { - #address-cells = <1>; - #size-cells = <0>; - - cpu@0 { - device_type = "cpu"; - model = "PowerPC,405GP"; - reg = <0x00000000>; - clock-frequency = <200000000>; /* Filled in by zImage */ - timebase-frequency = <0>; /* Filled in by zImage */ - i-cache-line-size = <32>; - d-cache-line-size = <32>; - i-cache-size = <16384>; - d-cache-size = <16384>; - dcr-controller; - dcr-access-method = "native"; - }; - }; - - memory { - device_type = "memory"; - reg = <0x00000000 0x00000000>; /* Filled in by zImage */ - }; - - UIC0: interrupt-controller { - compatible = "ibm,uic"; - interrupt-controller; - cell-index = <0>; - dcr-reg = <0x0c0 0x009>; - #address-cells = <0>; - #size-cells = <0>; - #interrupt-cells = <2>; - }; - - plb { - compatible = "ibm,plb3"; - #address-cells = <1>; - #size-cells = <1>; - ranges; - clock-frequency = <0>; /* Filled in by zImage */ - - SDRAM0: memory-controller { - compatible = "ibm,sdram-405gp"; - dcr-reg = <0x010 0x002>; - }; - - MAL: mcmal { - compatible = "ibm,mcmal-405gp", "ibm,mcmal"; - dcr-reg = <0x180 0x062>; - num-tx-chans = <1>; - num-rx-chans = <1>; - interrupt-parent = <&UIC0>; - interrupts = < - 0xb 0x4 /* TXEOB */ - 0xc 0x4 /* RXEOB */ - 0xa 0x4 /* SERR */ - 0xd 0x4 /* TXDE */ - 0xe 0x4 /* RXDE */>; - }; - - POB0: opb { - compatible = "ibm,opb-405gp", "ibm,opb"; - #address-cells = <1>; - #size-cells = <1>; - ranges = <0xef600000 0xef600000 0x00a00000>; - dcr-reg = <0x0a0 0x005>; - clock-frequency = <0>; /* Filled in by zImage */ - - UART0: serial@ef600300 { - device_type = "serial"; - compatible = "ns16550"; - reg = <0xef600300 0x00000008>; - virtual-reg = <0xef600300>; - clock-frequency = <0>; /* Filled in by zImage */ - current-speed = <9600>; - interrupt-parent = <&UIC0>; - interrupts = <0x0 0x4>; - }; - - UART1: serial@ef600400 { - device_type = "serial"; - compatible = "ns16550"; - reg = <0xef600400 0x00000008>; - virtual-reg = <0xef600400>; - clock-frequency = <0>; /* Filled in by zImage */ - current-speed = <9600>; - interrupt-parent = <&UIC0>; - interrupts = <0x1 0x4>; - }; - - IIC: i2c@ef600500 { - compatible = "ibm,iic-405gp", "ibm,iic"; - reg = <0xef600500 0x00000011>; - interrupt-parent = <&UIC0>; - interrupts = <0x2 0x4>; - }; - - GPIO: gpio@ef600700 { - compatible = "ibm,gpio-405gp"; - reg = <0xef600700 0x00000020>; - }; - - EMAC: ethernet@ef600800 { - device_type = "network"; - compatible = "ibm,emac-405gp", "ibm,emac"; - interrupt-parent = <&UIC0>; - interrupts = < - 0xf 0x4 /* Ethernet */ - 0x9 0x4 /* Ethernet Wake Up */>; - local-mac-address = [000000000000]; /* Filled in by zImage */ - reg = <0xef600800 0x00000070>; - mal-device = <&MAL>; - mal-tx-channel = <0>; - mal-rx-channel = <0>; - cell-index = <0>; - max-frame-size = <1500>; - rx-fifo-size = <4096>; - tx-fifo-size = <2048>; - phy-mode = "rmii"; - phy-map = <0x00000001>; - }; - - }; - - EBC0: ebc { - compatible = "ibm,ebc-405gp", "ibm,ebc"; - dcr-reg = <0x012 0x002>; - #address-cells = <2>; - #size-cells = <1>; - /* The ranges property is supplied by the bootwrapper - * and is based on the firmware's configuration of the - * EBC bridge - */ - clock-frequency = <0>; /* Filled in by zImage */ - - sram@0,0 { - reg = <0x00000000 0x00000000 0x00080000>; - }; - - flash@0,80000 { - compatible = "jedec-flash"; - bank-width = <1>; - reg = <0x00000000 0x00080000 0x00080000>; - #address-cells = <1>; - #size-cells = <1>; - partition@0 { - label = "OpenBIOS"; - reg = <0x00000000 0x00080000>; - read-only; - }; - }; - - nvram@1,0 { - /* NVRAM and RTC */ - compatible = "ds1743-nvram"; - #bytes = <0x2000>; - reg = <0x00000001 0x00000000 0x00002000>; - }; - - keyboard@2,0 { - compatible = "intel,82C42PC"; - reg = <0x00000002 0x00000000 0x00000002>; - }; - - ir@3,0 { - compatible = "ti,TIR2000PAG"; - reg = <0x00000003 0x00000000 0x00000010>; - }; - - fpga@7,0 { - compatible = "Walnut-FPGA"; - reg = <0x00000007 0x00000000 0x00000010>; - virtual-reg = <0xf0300005>; - }; - }; - - PCI0: pci@ec000000 { - device_type = "pci"; - #interrupt-cells = <1>; - #size-cells = <2>; - #address-cells = <3>; - compatible = "ibm,plb405gp-pci", "ibm,plb-pci"; - primary; - reg = <0xeec00000 0x00000008 /* Config space access */ - 0xeed80000 0x00000004 /* IACK */ - 0xeed80000 0x00000004 /* Special cycle */ - 0xef480000 0x00000040>; /* Internal registers */ - - /* Outbound ranges, one memory and one IO, - * later cannot be changed. Chip supports a second - * IO range but we don't use it for now - */ - ranges = <0x02000000 0x00000000 0x80000000 0x80000000 0x00000000 0x20000000 - 0x01000000 0x00000000 0x00000000 0xe8000000 0x00000000 0x00010000>; - - /* Inbound 2GB range starting at 0 */ - dma-ranges = <0x42000000 0x0 0x0 0x0 0x0 0x80000000>; - - /* Walnut has all 4 IRQ pins tied together per slot */ - interrupt-map-mask = <0xf800 0x0 0x0 0x0>; - interrupt-map = < - /* IDSEL 1 */ - 0x800 0x0 0x0 0x0 &UIC0 0x1c 0x8 - - /* IDSEL 2 */ - 0x1000 0x0 0x0 0x0 &UIC0 0x1d 0x8 - - /* IDSEL 3 */ - 0x1800 0x0 0x0 0x0 &UIC0 0x1e 0x8 - - /* IDSEL 4 */ - 0x2000 0x0 0x0 0x0 &UIC0 0x1f 0x8 - >; - }; - }; - - chosen { - stdout-path = "/plb/opb/serial@ef600300"; - }; -}; diff --git a/arch/powerpc/boot/ep405.c b/arch/powerpc/boot/ep405.c deleted file mode 100644 index f9ad1e6a844e..000000000000 --- a/arch/powerpc/boot/ep405.c +++ /dev/null @@ -1,71 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-only -/* - * Embedded Planet EP405 with PlanetCore firmware - * - * (c) Benjamin Herrenschmidt <benh@kernel.crashing.org>, IBM Corp,\ - * - * Based on ep88xc.c by - * - * Scott Wood <scottwood@freescale.com> - * - * Copyright (c) 2007 Freescale Semiconductor, Inc. - */ - -#include "ops.h" -#include "stdio.h" -#include "planetcore.h" -#include "dcr.h" -#include "4xx.h" -#include "io.h" - -static char *table; -static u64 mem_size; - -static void platform_fixups(void) -{ - u64 val; - void *nvrtc; - - dt_fixup_memory(0, mem_size); - planetcore_set_mac_addrs(table); - - if (!planetcore_get_decimal(table, PLANETCORE_KEY_CRYSTAL_HZ, &val)) { - printf("No PlanetCore crystal frequency key.\r\n"); - return; - } - ibm405gp_fixup_clocks(val, 0xa8c000); - ibm4xx_quiesce_eth((u32 *)0xef600800, NULL); - ibm4xx_fixup_ebc_ranges("/plb/ebc"); - - if (!planetcore_get_decimal(table, PLANETCORE_KEY_KB_NVRAM, &val)) { - printf("No PlanetCore NVRAM size key.\r\n"); - return; - } - nvrtc = finddevice("/plb/ebc/nvrtc@4,200000"); - if (nvrtc != NULL) { - u32 reg[3] = { 4, 0x200000, 0}; - getprop(nvrtc, "reg", reg, 3); - reg[2] = (val << 10) & 0xffffffff; - setprop(nvrtc, "reg", reg, 3); - } -} - -void platform_init(unsigned long r3, unsigned long r4, unsigned long r5, - unsigned long r6, unsigned long r7) -{ - table = (char *)r3; - planetcore_prepare_table(table); - - if (!planetcore_get_decimal(table, PLANETCORE_KEY_MB_RAM, &mem_size)) - return; - - mem_size *= 1024 * 1024; - simple_alloc_init(_end, mem_size - (unsigned long)_end, 32, 64); - - fdt_init(_dtb_start); - - planetcore_set_stdout_path(table); - - serial_console_init(); - platform_ops.fixups = platform_fixups; -} diff --git a/arch/powerpc/boot/main.c b/arch/powerpc/boot/main.c index a9d209135975..cae31a6e8f02 100644 --- a/arch/powerpc/boot/main.c +++ b/arch/powerpc/boot/main.c @@ -104,7 +104,7 @@ static struct addr_range prep_initrd(struct addr_range vmlinux, void *chosen, { /* If we have an image attached to us, it overrides anything * supplied by the loader. */ - if (_initrd_end > _initrd_start) { + if (&_initrd_end > &_initrd_start) { printf("Attached initrd image at 0x%p-0x%p\n\r", _initrd_start, _initrd_end); initrd_addr = (unsigned long)_initrd_start; @@ -152,7 +152,7 @@ static void prep_esm_blob(struct addr_range vmlinux, void *chosen) unsigned long esm_blob_addr, esm_blob_size; /* Do we have an ESM (Enter Secure Mode) blob? */ - if (_esm_blob_end <= _esm_blob_start) + if (&_esm_blob_end <= &_esm_blob_start) return; printf("Attached ESM blob at 0x%p-0x%p\n\r", diff --git a/arch/powerpc/boot/ops.h b/arch/powerpc/boot/ops.h index e0606766480f..6455fc9a244f 100644 --- a/arch/powerpc/boot/ops.h +++ b/arch/powerpc/boot/ops.h @@ -88,7 +88,6 @@ int serial_console_init(void); int ns16550_console_init(void *devp, struct serial_console_data *scdp); int cpm_console_init(void *devp, struct serial_console_data *scdp); int mpc5200_psc_console_init(void *devp, struct serial_console_data *scdp); -int uartlite_console_init(void *devp, struct serial_console_data *scdp); int opal_console_init(void *devp, struct serial_console_data *scdp); void *simple_alloc_init(char *base, unsigned long heap_size, unsigned long granularity, unsigned long max_allocs); diff --git a/arch/powerpc/boot/ps3.c b/arch/powerpc/boot/ps3.c index c52552a681c5..6e4efbdb6b7c 100644 --- a/arch/powerpc/boot/ps3.c +++ b/arch/powerpc/boot/ps3.c @@ -127,7 +127,7 @@ void platform_init(void) ps3_repository_read_rm_size(&rm_size); dt_fixup_memory(0, rm_size); - if (_initrd_end > _initrd_start) { + if (&_initrd_end > &_initrd_start) { setprop_val(chosen, "linux,initrd-start", (u32)(_initrd_start)); setprop_val(chosen, "linux,initrd-end", (u32)(_initrd_end)); } diff --git a/arch/powerpc/boot/serial.c b/arch/powerpc/boot/serial.c index 9457863147f9..9a19e5905485 100644 --- a/arch/powerpc/boot/serial.c +++ b/arch/powerpc/boot/serial.c @@ -128,15 +128,10 @@ int serial_console_init(void) dt_is_compatible(devp, "fsl,cpm2-smc-uart")) rc = cpm_console_init(devp, &serial_cd); #endif -#ifdef CONFIG_PPC_MPC52XX +#ifdef CONFIG_PPC_MPC52xx else if (dt_is_compatible(devp, "fsl,mpc5200-psc-uart")) rc = mpc5200_psc_console_init(devp, &serial_cd); #endif -#ifdef CONFIG_XILINX_VIRTEX - else if (dt_is_compatible(devp, "xlnx,opb-uartlite-1.00.b") || - dt_is_compatible(devp, "xlnx,xps-uartlite-1.00.a")) - rc = uartlite_console_init(devp, &serial_cd); -#endif #ifdef CONFIG_PPC64_BOOT_WRAPPER else if (dt_is_compatible(devp, "ibm,opal-console-raw")) rc = opal_console_init(devp, &serial_cd); diff --git a/arch/powerpc/boot/treeboot-walnut.c b/arch/powerpc/boot/treeboot-walnut.c deleted file mode 100644 index 623f58e7f7c9..000000000000 --- a/arch/powerpc/boot/treeboot-walnut.c +++ /dev/null @@ -1,81 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-only -/* - * Old U-boot compatibility for Walnut - * - * Author: Josh Boyer <jwboyer@linux.vnet.ibm.com> - * - * Copyright 2007 IBM Corporation - * Based on cuboot-83xx.c, which is: - * Copyright (c) 2007 Freescale Semiconductor, Inc. - */ - -#include "ops.h" -#include "stdio.h" -#include "dcr.h" -#include "4xx.h" -#include "io.h" - -BSS_STACK(4096); - -static void walnut_flashsel_fixup(void) -{ - void *devp, *sram; - u32 reg_flash[3] = {0x0, 0x0, 0x80000}; - u32 reg_sram[3] = {0x0, 0x0, 0x80000}; - u8 *fpga; - u8 fpga_brds1 = 0x0; - - devp = finddevice("/plb/ebc/fpga"); - if (!devp) - fatal("Couldn't locate FPGA node\n\r"); - - if (getprop(devp, "virtual-reg", &fpga, sizeof(fpga)) != sizeof(fpga)) - fatal("no virtual-reg property\n\r"); - - fpga_brds1 = in_8(fpga); - - devp = finddevice("/plb/ebc/flash"); - if (!devp) - fatal("Couldn't locate flash node\n\r"); - - if (getprop(devp, "reg", reg_flash, sizeof(reg_flash)) != sizeof(reg_flash)) - fatal("flash reg property has unexpected size\n\r"); - - sram = finddevice("/plb/ebc/sram"); - if (!sram) - fatal("Couldn't locate sram node\n\r"); - - if (getprop(sram, "reg", reg_sram, sizeof(reg_sram)) != sizeof(reg_sram)) - fatal("sram reg property has unexpected size\n\r"); - - if (fpga_brds1 & 0x1) { - reg_flash[1] ^= 0x80000; - reg_sram[1] ^= 0x80000; - } - - setprop(devp, "reg", reg_flash, sizeof(reg_flash)); - setprop(sram, "reg", reg_sram, sizeof(reg_sram)); -} - -#define WALNUT_OPENBIOS_MAC_OFF 0xfffffe0b -static void walnut_fixups(void) -{ - ibm4xx_sdram_fixup_memsize(); - ibm405gp_fixup_clocks(33330000, 0xa8c000); - ibm4xx_quiesce_eth((u32 *)0xef600800, NULL); - ibm4xx_fixup_ebc_ranges("/plb/ebc"); - walnut_flashsel_fixup(); - dt_fixup_mac_address_by_alias("ethernet0", (u8 *) WALNUT_OPENBIOS_MAC_OFF); -} - -void platform_init(void) -{ - unsigned long end_of_ram = 0x2000000; - unsigned long avail_ram = end_of_ram - (unsigned long) _end; - - simple_alloc_init(_end, avail_ram, 32, 32); - platform_ops.fixups = walnut_fixups; - platform_ops.exit = ibm40x_dbcr_reset; - fdt_init(_dtb_start); - serial_console_init(); -} diff --git a/arch/powerpc/boot/uartlite.c b/arch/powerpc/boot/uartlite.c deleted file mode 100644 index 46bed69b4169..000000000000 --- a/arch/powerpc/boot/uartlite.c +++ /dev/null @@ -1,79 +0,0 @@ -/* - * Xilinx UARTLITE bootloader driver - * - * Copyright (C) 2007 Secret Lab Technologies Ltd. - * - * This file is licensed under the terms of the GNU General Public License - * version 2. This program is licensed "as is" without any warranty of any - * kind, whether express or implied. - */ - -#include <stdarg.h> -#include <stddef.h> -#include "types.h" -#include "string.h" -#include "stdio.h" -#include "io.h" -#include "ops.h" - -#define ULITE_RX 0x00 -#define ULITE_TX 0x04 -#define ULITE_STATUS 0x08 -#define ULITE_CONTROL 0x0c - -#define ULITE_STATUS_RXVALID 0x01 -#define ULITE_STATUS_TXFULL 0x08 - -#define ULITE_CONTROL_RST_RX 0x02 - -static void * reg_base; - -static int uartlite_open(void) -{ - /* Clear the RX FIFO */ - out_be32(reg_base + ULITE_CONTROL, ULITE_CONTROL_RST_RX); - return 0; -} - -static void uartlite_putc(unsigned char c) -{ - u32 reg = ULITE_STATUS_TXFULL; - while (reg & ULITE_STATUS_TXFULL) /* spin on TXFULL bit */ - reg = in_be32(reg_base + ULITE_STATUS); - out_be32(reg_base + ULITE_TX, c); -} - -static unsigned char uartlite_getc(void) -{ - u32 reg = 0; - while (!(reg & ULITE_STATUS_RXVALID)) /* spin waiting for RXVALID bit */ - reg = in_be32(reg_base + ULITE_STATUS); - return in_be32(reg_base + ULITE_RX); -} - -static u8 uartlite_tstc(void) -{ - u32 reg = in_be32(reg_base + ULITE_STATUS); - return reg & ULITE_STATUS_RXVALID; -} - -int uartlite_console_init(void *devp, struct serial_console_data *scdp) -{ - int n; - unsigned long reg_phys; - - n = getprop(devp, "virtual-reg", ®_base, sizeof(reg_base)); - if (n != sizeof(reg_base)) { - if (!dt_xlate_reg(devp, 0, ®_phys, NULL)) - return -1; - - reg_base = (void *)reg_phys; - } - - scdp->open = uartlite_open; - scdp->putc = uartlite_putc; - scdp->getc = uartlite_getc; - scdp->tstc = uartlite_tstc; - scdp->close = NULL; - return 0; -} diff --git a/arch/powerpc/boot/virtex.c b/arch/powerpc/boot/virtex.c deleted file mode 100644 index f731cbb4bff0..000000000000 --- a/arch/powerpc/boot/virtex.c +++ /dev/null @@ -1,97 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-only -/* - * The platform specific code for virtex devices since a boot loader is not - * always used. - * - * (C) Copyright 2008 Xilinx, Inc. - */ - -#include "ops.h" -#include "io.h" -#include "stdio.h" - -#define UART_DLL 0 /* Out: Divisor Latch Low */ -#define UART_DLM 1 /* Out: Divisor Latch High */ -#define UART_FCR 2 /* Out: FIFO Control Register */ -#define UART_FCR_CLEAR_RCVR 0x02 /* Clear the RCVR FIFO */ -#define UART_FCR_CLEAR_XMIT 0x04 /* Clear the XMIT FIFO */ -#define UART_LCR 3 /* Out: Line Control Register */ -#define UART_MCR 4 /* Out: Modem Control Register */ -#define UART_MCR_RTS 0x02 /* RTS complement */ -#define UART_MCR_DTR 0x01 /* DTR complement */ -#define UART_LCR_DLAB 0x80 /* Divisor latch access bit */ -#define UART_LCR_WLEN8 0x03 /* Wordlength: 8 bits */ - -static int virtex_ns16550_console_init(void *devp) -{ - unsigned char *reg_base; - u32 reg_shift, reg_offset, clk, spd; - u16 divisor; - int n; - - if (dt_get_virtual_reg(devp, (void **)®_base, 1) < 1) - return -1; - - n = getprop(devp, "reg-offset", ®_offset, sizeof(reg_offset)); - if (n == sizeof(reg_offset)) - reg_base += reg_offset; - - n = getprop(devp, "reg-shift", ®_shift, sizeof(reg_shift)); - if (n != sizeof(reg_shift)) - reg_shift = 0; - - n = getprop(devp, "current-speed", (void *)&spd, sizeof(spd)); - if (n != sizeof(spd)) - spd = 9600; - - /* should there be a default clock rate?*/ - n = getprop(devp, "clock-frequency", (void *)&clk, sizeof(clk)); - if (n != sizeof(clk)) - return -1; - - divisor = clk / (16 * spd); - - /* Access baud rate */ - out_8(reg_base + (UART_LCR << reg_shift), UART_LCR_DLAB); - - /* Baud rate based on input clock */ - out_8(reg_base + (UART_DLL << reg_shift), divisor & 0xFF); - out_8(reg_base + (UART_DLM << reg_shift), divisor >> 8); - - /* 8 data, 1 stop, no parity */ - out_8(reg_base + (UART_LCR << reg_shift), UART_LCR_WLEN8); - - /* RTS/DTR */ - out_8(reg_base + (UART_MCR << reg_shift), UART_MCR_RTS | UART_MCR_DTR); - - /* Clear transmitter and receiver */ - out_8(reg_base + (UART_FCR << reg_shift), - UART_FCR_CLEAR_XMIT | UART_FCR_CLEAR_RCVR); - return 0; -} - -/* For virtex, the kernel may be loaded without using a bootloader and if so - some UARTs need more setup than is provided in the normal console init -*/ -int platform_specific_init(void) -{ - void *devp; - char devtype[MAX_PROP_LEN]; - char path[MAX_PATH_LEN]; - - devp = finddevice("/chosen"); - if (devp == NULL) - return -1; - - if (getprop(devp, "linux,stdout-path", path, MAX_PATH_LEN) > 0) { - devp = finddevice(path); - if (devp == NULL) - return -1; - - if ((getprop(devp, "device_type", devtype, sizeof(devtype)) > 0) - && !strcmp(devtype, "serial") - && (dt_is_compatible(devp, "ns16550"))) - virtex_ns16550_console_init(devp); - } - return 0; -} diff --git a/arch/powerpc/boot/virtex405-head.S b/arch/powerpc/boot/virtex405-head.S deleted file mode 100644 index 00bab7d7c48c..000000000000 --- a/arch/powerpc/boot/virtex405-head.S +++ /dev/null @@ -1,31 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0 */ -#include "ppc_asm.h" - - .text - .global _zimage_start -_zimage_start: - - /* PPC errata 213: needed by Virtex-4 FX */ - mfccr0 0 - oris 0,0,0x50000000@h - mtccr0 0 - - /* - * Invalidate the data cache if the data cache is turned off. - * - The 405 core does not invalidate the data cache on power-up - * or reset but does turn off the data cache. We cannot assume - * that the cache contents are valid. - * - If the data cache is turned on this must have been done by - * a bootloader and we assume that the cache contents are - * valid. - */ - mfdccr r9 - cmplwi r9,0 - bne 2f - lis r9,0 - li r8,256 - mtctr r8 -1: dccci r0,r9 - addi r9,r9,0x20 - bdnz 1b -2: b _zimage_start_lib diff --git a/arch/powerpc/boot/wrapper b/arch/powerpc/boot/wrapper index ed6266367bc0..cd58a62e810d 100755 --- a/arch/powerpc/boot/wrapper +++ b/arch/powerpc/boot/wrapper @@ -29,6 +29,7 @@ set -e # Allow for verbose output if [ "$V" = 1 ]; then set -x + map="-Map wrapper.map" fi # defaults @@ -323,14 +324,6 @@ adder875-redboot) platformo="$object/fixed-head.o $object/redboot-8xx.o" binary=y ;; -simpleboot-virtex405-*) - platformo="$object/virtex405-head.o $object/simpleboot.o $object/virtex.o" - binary=y - ;; -simpleboot-virtex440-*) - platformo="$object/fixed-head.o $object/simpleboot.o $object/virtex.o" - binary=y - ;; simpleboot-*) platformo="$object/fixed-head.o $object/simpleboot.o" binary=y @@ -500,7 +493,7 @@ if [ "$platform" != "miboot" ]; then text_start="-Ttext $link_address" fi #link everything - ${CROSS}ld -m $format -T $lds $text_start $pie $nodl -o "$ofile" \ + ${CROSS}ld -m $format -T $lds $text_start $pie $nodl -o "$ofile" $map \ $platformo $tmp $object/wrapper.a rm $tmp fi @@ -570,7 +563,18 @@ ps3) count=$overlay_size bs=1 odir="$(dirname "$ofile.bin")" - rm -f "$odir/otheros.bld" - gzip -n --force -9 --stdout "$ofile.bin" > "$odir/otheros.bld" + + # The ps3's flash loader has a size limit of 16 MiB for the uncompressed + # image. If a compressed image that exceeded this limit is written to + # flash the loader will decompress that image until the 16 MiB limit is + # reached, then enter the system reset vector of the partially decompressed + # image. No warning is issued. + rm -f "$odir"/{otheros,otheros-too-big}.bld + size=$(${CROSS}nm --no-sort --radix=d "$ofile" | egrep ' _end$' | cut -d' ' -f1) + bld="otheros.bld" + if [ $size -gt $((0x1000000)) ]; then + bld="otheros-too-big.bld" + fi + gzip -n --force -9 --stdout "$ofile.bin" > "$odir/$bld" ;; esac |