diff options
Diffstat (limited to 'arch/mips/pnx833x/stb22x/board.c')
| -rw-r--r-- | arch/mips/pnx833x/stb22x/board.c | 120 |
1 files changed, 0 insertions, 120 deletions
diff --git a/arch/mips/pnx833x/stb22x/board.c b/arch/mips/pnx833x/stb22x/board.c deleted file mode 100644 index 93d8e7b73427..000000000000 --- a/arch/mips/pnx833x/stb22x/board.c +++ /dev/null @@ -1,120 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-or-later -/* - * board.c: STB225 board support. - * - * Copyright 2008 NXP Semiconductors - * Chris Steel <chris.steel@nxp.com> - * Daniel Laird <daniel.j.laird@nxp.com> - * - * Based on software written by: - * Nikita Youshchenko <yoush@debian.org>, based on PNX8550 code. - */ -#include <linux/init.h> -#include <asm/bootinfo.h> -#include <linux/mm.h> -#include <pnx833x.h> -#include <gpio.h> - -/* endianess twiddlers */ -#define PNX8335_DEBUG0 0x4400 -#define PNX8335_DEBUG1 0x4404 -#define PNX8335_DEBUG2 0x4408 -#define PNX8335_DEBUG3 0x440c -#define PNX8335_DEBUG4 0x4410 -#define PNX8335_DEBUG5 0x4414 -#define PNX8335_DEBUG6 0x4418 -#define PNX8335_DEBUG7 0x441c - -int prom_argc; -char **prom_argv, **prom_envp; - -extern void prom_init_cmdline(void); -extern char *prom_getenv(char *envname); - -const char *get_system_type(void) -{ - return "NXP STB22x"; -} - -static inline unsigned long env_or_default(char *env, unsigned long dfl) -{ - char *str = prom_getenv(env); - return str ? simple_strtol(str, 0, 0) : dfl; -} - -void __init prom_init(void) -{ - unsigned long memsize; - - prom_argc = fw_arg0; - prom_argv = (char **)fw_arg1; - prom_envp = (char **)fw_arg2; - - prom_init_cmdline(); - - memsize = env_or_default("memsize", 0x02000000); - add_memory_region(0, memsize, BOOT_MEM_RAM); -} - -void __init pnx833x_board_setup(void) -{ - pnx833x_gpio_select_function_alt(4); - pnx833x_gpio_select_output(4); - pnx833x_gpio_select_function_alt(5); - pnx833x_gpio_select_input(5); - pnx833x_gpio_select_function_alt(6); - pnx833x_gpio_select_input(6); - pnx833x_gpio_select_function_alt(7); - pnx833x_gpio_select_output(7); - - pnx833x_gpio_select_function_alt(25); - pnx833x_gpio_select_function_alt(26); - - pnx833x_gpio_select_function_alt(27); - pnx833x_gpio_select_function_alt(28); - pnx833x_gpio_select_function_alt(29); - pnx833x_gpio_select_function_alt(30); - pnx833x_gpio_select_function_alt(31); - pnx833x_gpio_select_function_alt(32); - pnx833x_gpio_select_function_alt(33); - -#if IS_ENABLED(CONFIG_MTD_NAND_PLATFORM) - /* Setup MIU for NAND access on CS0... - * - * (it seems that we must also configure CS1 for reliable operation, - * otherwise the first read ID command will fail if it's read as 4 bytes - * but pass if it's read as 1 word.) - */ - - /* Setup MIU CS0 & CS1 timing */ - PNX833X_MIU_SEL0 = 0; - PNX833X_MIU_SEL1 = 0; - PNX833X_MIU_SEL0_TIMING = 0x50003081; - PNX833X_MIU_SEL1_TIMING = 0x50003081; - - /* Setup GPIO 00 for use as MIU CS1 (CS0 is not multiplexed, so does not need this) */ - pnx833x_gpio_select_function_alt(0); - - /* Setup GPIO 04 to input NAND read/busy signal */ - pnx833x_gpio_select_function_io(4); - pnx833x_gpio_select_input(4); - - /* Setup GPIO 05 to disable NAND write protect */ - pnx833x_gpio_select_function_io(5); - pnx833x_gpio_select_output(5); - pnx833x_gpio_write(1, 5); - -#elif IS_ENABLED(CONFIG_MTD_CFI) - - /* Set up MIU for 16-bit NOR access on CS0 and CS1... */ - - /* Setup MIU CS0 & CS1 timing */ - PNX833X_MIU_SEL0 = 1; - PNX833X_MIU_SEL1 = 1; - PNX833X_MIU_SEL0_TIMING = 0x6A08D082; - PNX833X_MIU_SEL1_TIMING = 0x6A08D082; - - /* Setup GPIO 00 for use as MIU CS1 (CS0 is not multiplexed, so does not need this) */ - pnx833x_gpio_select_function_alt(0); -#endif -} |