diff options
Diffstat (limited to 'arch/mips/lantiq/xway/reset.c')
| -rw-r--r-- | arch/mips/lantiq/xway/reset.c | 106 |
1 files changed, 0 insertions, 106 deletions
diff --git a/arch/mips/lantiq/xway/reset.c b/arch/mips/lantiq/xway/reset.c index 5cb9309b0047..be5fd29de523 100644 --- a/arch/mips/lantiq/xway/reset.c +++ b/arch/mips/lantiq/xway/reset.c @@ -27,18 +27,6 @@ #define RCU_RST_REQ 0x0010 /* reset status register */ #define RCU_RST_STAT 0x0014 -/* vr9 gphy registers */ -#define RCU_GFS_ADD0_XRX200 0x0020 -#define RCU_GFS_ADD1_XRX200 0x0068 -/* xRX300 gphy registers */ -#define RCU_GFS_ADD0_XRX300 0x0020 -#define RCU_GFS_ADD1_XRX300 0x0058 -#define RCU_GFS_ADD2_XRX300 0x00AC -/* xRX330 gphy registers */ -#define RCU_GFS_ADD0_XRX330 0x0020 -#define RCU_GFS_ADD1_XRX330 0x0058 -#define RCU_GFS_ADD2_XRX330 0x00AC -#define RCU_GFS_ADD3_XRX330 0x0264 /* xbar BE flag */ #define RCU_AHB_ENDIAN 0x004C @@ -48,15 +36,6 @@ #define RCU_RD_GPHY0_XRX200 BIT(31) #define RCU_RD_SRST BIT(30) #define RCU_RD_GPHY1_XRX200 BIT(29) -/* xRX300 bits */ -#define RCU_RD_GPHY0_XRX300 BIT(31) -#define RCU_RD_GPHY1_XRX300 BIT(29) -#define RCU_RD_GPHY2_XRX300 BIT(28) -/* xRX330 bits */ -#define RCU_RD_GPHY0_XRX330 BIT(31) -#define RCU_RD_GPHY1_XRX330 BIT(29) -#define RCU_RD_GPHY2_XRX330 BIT(28) -#define RCU_RD_GPHY3_XRX330 BIT(10) /* reset cause */ #define RCU_STAT_SHIFT 26 @@ -98,7 +77,6 @@ /* remapped base addr of the reset control unit */ static void __iomem *ltq_rcu_membase; static struct device_node *ltq_rcu_np; -static DEFINE_SPINLOCK(ltq_rcu_lock); static void ltq_rcu_w32(uint32_t val, uint32_t reg_off) { @@ -110,90 +88,6 @@ static uint32_t ltq_rcu_r32(uint32_t reg_off) return ltq_r32(ltq_rcu_membase + reg_off); } -static void ltq_rcu_w32_mask(uint32_t clr, uint32_t set, uint32_t reg_off) -{ - unsigned long flags; - - spin_lock_irqsave(<q_rcu_lock, flags); - ltq_rcu_w32((ltq_rcu_r32(reg_off) & ~(clr)) | (set), reg_off); - spin_unlock_irqrestore(<q_rcu_lock, flags); -} - -struct ltq_gphy_reset { - u32 rd; - u32 addr; -}; - -/* reset / boot a gphy */ -static struct ltq_gphy_reset xrx200_gphy[] = { - {RCU_RD_GPHY0_XRX200, RCU_GFS_ADD0_XRX200}, - {RCU_RD_GPHY1_XRX200, RCU_GFS_ADD1_XRX200}, -}; - -/* reset / boot a gphy */ -static struct ltq_gphy_reset xrx300_gphy[] = { - {RCU_RD_GPHY0_XRX300, RCU_GFS_ADD0_XRX300}, - {RCU_RD_GPHY1_XRX300, RCU_GFS_ADD1_XRX300}, - {RCU_RD_GPHY2_XRX300, RCU_GFS_ADD2_XRX300}, -}; - -/* reset / boot a gphy */ -static struct ltq_gphy_reset xrx330_gphy[] = { - {RCU_RD_GPHY0_XRX330, RCU_GFS_ADD0_XRX330}, - {RCU_RD_GPHY1_XRX330, RCU_GFS_ADD1_XRX330}, - {RCU_RD_GPHY2_XRX330, RCU_GFS_ADD2_XRX330}, - {RCU_RD_GPHY3_XRX330, RCU_GFS_ADD3_XRX330}, -}; - -static void xrx200_gphy_boot_addr(struct ltq_gphy_reset *phy_regs, - dma_addr_t dev_addr) -{ - ltq_rcu_w32_mask(0, phy_regs->rd, RCU_RST_REQ); - ltq_rcu_w32(dev_addr, phy_regs->addr); - ltq_rcu_w32_mask(phy_regs->rd, 0, RCU_RST_REQ); -} - -/* reset and boot a gphy. these phys only exist on xrx200 SoC */ -int xrx200_gphy_boot(struct device *dev, unsigned int id, dma_addr_t dev_addr) -{ - struct clk *clk; - - if (!of_device_is_compatible(ltq_rcu_np, "lantiq,rcu-xrx200")) { - dev_err(dev, "this SoC has no GPHY\n"); - return -EINVAL; - } - - if (of_machine_is_compatible("lantiq,vr9")) { - clk = clk_get_sys("1f203000.rcu", "gphy"); - if (IS_ERR(clk)) - return PTR_ERR(clk); - clk_enable(clk); - } - - dev_info(dev, "booting GPHY%u firmware at %X\n", id, dev_addr); - - if (of_machine_is_compatible("lantiq,vr9")) { - if (id >= ARRAY_SIZE(xrx200_gphy)) { - dev_err(dev, "%u is an invalid gphy id\n", id); - return -EINVAL; - } - xrx200_gphy_boot_addr(&xrx200_gphy[id], dev_addr); - } else if (of_machine_is_compatible("lantiq,ar10")) { - if (id >= ARRAY_SIZE(xrx300_gphy)) { - dev_err(dev, "%u is an invalid gphy id\n", id); - return -EINVAL; - } - xrx200_gphy_boot_addr(&xrx300_gphy[id], dev_addr); - } else if (of_machine_is_compatible("lantiq,grx390")) { - if (id >= ARRAY_SIZE(xrx330_gphy)) { - dev_err(dev, "%u is an invalid gphy id\n", id); - return -EINVAL; - } - xrx200_gphy_boot_addr(&xrx330_gphy[id], dev_addr); - } - return 0; -} - static void ltq_machine_restart(char *command) { u32 val = ltq_rcu_r32(RCU_RST_REQ); |