1 files changed, 0 insertions, 66 deletions
diff --git a/arch/blackfin/mach-common/arch_checks.c b/arch/blackfin/mach-common/arch_checks.c
deleted file mode 100644
index d8643fdd0fcf..000000000000
--- a/arch/blackfin/mach-common/arch_checks.c
+++ /dev/null
@@ -1,66 +0,0 @@
-/*
- * Do some checking to make sure things are OK
- *
- * Copyright 2007-2010 Analog Devices Inc.
- *
- * Licensed under the GPL-2 or later.
- */
-
-#include <asm/fixed_code.h>
-#include <mach/anomaly.h>
-#include <asm/clocks.h>
-
-#ifdef CONFIG_BFIN_KERNEL_CLOCK
-
-# if (CONFIG_VCO_HZ > CONFIG_MAX_VCO_HZ)
-#  error "VCO selected is more than maximum value. Please change the VCO multipler"
-# endif
-
-# if (CONFIG_SCLK_HZ > CONFIG_MAX_SCLK_HZ)
-# error "Sclk value selected is more than maximum. Please select a proper value for SCLK multiplier"
-# endif
-
-# if (CONFIG_SCLK_HZ < CONFIG_MIN_SCLK_HZ)
-# error "Sclk value selected is less than minimum. Please select a proper value for SCLK multiplier"
-# endif
-
-# if (ANOMALY_05000273) && (CONFIG_SCLK_HZ * 2 > CONFIG_CCLK_HZ)
-# error "ANOMALY 05000273, please make sure CCLK is at least 2x SCLK"
-# endif
-
-# if (CONFIG_SCLK_HZ > CONFIG_CCLK_HZ) && (CONFIG_SCLK_HZ != CONFIG_CLKIN_HZ) && (CONFIG_CCLK_HZ != CONFIG_CLKIN_HZ)
-# error "Please select sclk less than cclk"
-# endif
-
-#endif /* CONFIG_BFIN_KERNEL_CLOCK */
-
-#if CONFIG_BOOT_LOAD < FIXED_CODE_END
-# error "The kernel load address must be after the fixed code section"
-#endif
-
-#if (CONFIG_BOOT_LOAD & 0x3)
-# error "The kernel load address must be 4 byte aligned"
-#endif
-
-/* The entire kernel must be able to make a 24bit pcrel call to start of L1 */
-#if ((0xffffffff - L1_CODE_START + 1) + CONFIG_BOOT_LOAD) > 0x1000000
-# error "The kernel load address is too high; keep it below 10meg for safety"
-#endif
-
-#if ANOMALY_05000263 && defined(CONFIG_MPU)
-# error the MPU will not function safely while Anomaly 05000263 applies
-#endif
-
-#if ANOMALY_05000448
-# error You are using a part with anomaly 05000448, this issue causes random memory read/write failures - that means random crashes.
-#endif
-
-/* if 220 exists, can not set External Memory WB and L2 not_cached, either External Memory not_cached and L2 WB */
-#if ANOMALY_05000220 && \
-	(defined(CONFIG_BFIN_EXTMEM_WRITEBACK) || defined(CONFIG_BFIN_L2_WRITEBACK))
-# error "Anomaly 05000220 does not allow you to use Write Back cache with L2 or External Memory"
-#endif
-
-#if ANOMALY_05000491 && !defined(CONFIG_ICACHE_FLUSH_L1)
-# error You need IFLUSH in L1 inst while Anomaly 05000491 applies
-#endif