diff options
Diffstat (limited to 'arch/arm64')
131 files changed, 5218 insertions, 391 deletions
diff --git a/arch/arm64/Kconfig.platforms b/arch/arm64/Kconfig.platforms index 1d03ef54295a..084f70c2ba48 100644 --- a/arch/arm64/Kconfig.platforms +++ b/arch/arm64/Kconfig.platforms @@ -104,6 +104,7 @@ config ARCH_MESON select PINCTRL_MESON select COMMON_CLK_AMLOGIC select COMMON_CLK_GXBB + select MESON_IRQ_GPIO help This enables support for the Amlogic S905 SoCs. @@ -187,6 +188,12 @@ config ARCH_R8A7796 help This enables support for the Renesas R-Car M3-W SoC. +config ARCH_R8A77970 + bool "Renesas R-Car V3M SoC Platform" + depends on ARCH_RENESAS + help + This enables support for the Renesas R-Car V3M SoC. + config ARCH_R8A77995 bool "Renesas R-Car D3 SoC Platform" depends on ARCH_RENESAS diff --git a/arch/arm64/boot/dts/actions/s900-bubblegum-96.dts b/arch/arm64/boot/dts/actions/s900-bubblegum-96.dts index a0c3484dbd12..21ca80f9941c 100644 --- a/arch/arm64/boot/dts/actions/s900-bubblegum-96.dts +++ b/arch/arm64/boot/dts/actions/s900-bubblegum-96.dts @@ -24,6 +24,12 @@ device_type = "memory"; reg = <0x0 0x0 0x0 0x80000000>; }; + + uart5_clk: uart5-clk { + compatible = "fixed-clock"; + clock-frequency = <921600>; + #clock-cells = <0>; + }; }; &timer { @@ -32,4 +38,5 @@ &uart5 { status = "okay"; + clocks = <&uart5_clk>; }; diff --git a/arch/arm64/boot/dts/allwinner/Makefile b/arch/arm64/boot/dts/allwinner/Makefile index 7d3acb355ff3..f505227b0250 100644 --- a/arch/arm64/boot/dts/allwinner/Makefile +++ b/arch/arm64/boot/dts/allwinner/Makefile @@ -9,3 +9,4 @@ dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h5-orangepi-pc2.dtb dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h5-orangepi-prime.dtb dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h5-orangepi-zero-plus2.dtb dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h5-nanopi-neo2.dtb +dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h5-nanopi-neo-plus2.dtb diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-bananapi-m64.dts b/arch/arm64/boot/dts/allwinner/sun50i-a64-bananapi-m64.dts index d347f52e27f6..45bdbfb96126 100644 --- a/arch/arm64/boot/dts/allwinner/sun50i-a64-bananapi-m64.dts +++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-bananapi-m64.dts @@ -51,6 +51,7 @@ compatible = "sinovoip,bananapi-m64", "allwinner,sun50i-a64"; aliases { + ethernet0 = &emac; serial0 = &uart0; serial1 = &uart1; }; @@ -69,6 +70,14 @@ status = "okay"; }; +&emac { + pinctrl-names = "default"; + pinctrl-0 = <&rgmii_pins>; + phy-mode = "rgmii"; + phy-handle = <&ext_rgmii_phy>; + status = "okay"; +}; + &i2c1 { pinctrl-names = "default"; pinctrl-0 = <&i2c1_pins>; @@ -79,6 +88,13 @@ bias-pull-up; }; +&mdio { + ext_rgmii_phy: ethernet-phy@1 { + compatible = "ethernet-phy-ieee802.3-c22"; + reg = <1>; + }; +}; + &mmc0 { pinctrl-names = "default"; pinctrl-0 = <&mmc0_pins>; diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-pine64-plus.dts b/arch/arm64/boot/dts/allwinner/sun50i-a64-pine64-plus.dts index f82ccf332c0f..24f1aac366d6 100644 --- a/arch/arm64/boot/dts/allwinner/sun50i-a64-pine64-plus.dts +++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-pine64-plus.dts @@ -48,3 +48,18 @@ /* TODO: Camera, touchscreen, etc. */ }; + +&emac { + pinctrl-names = "default"; + pinctrl-0 = <&rgmii_pins>; + phy-mode = "rgmii"; + phy-handle = <&ext_rgmii_phy>; + status = "okay"; +}; + +&mdio { + ext_rgmii_phy: ethernet-phy@1 { + compatible = "ethernet-phy-ieee802.3-c22"; + reg = <1>; + }; +}; diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-pine64.dts b/arch/arm64/boot/dts/allwinner/sun50i-a64-pine64.dts index d06e34b5d192..806442d3e846 100644 --- a/arch/arm64/boot/dts/allwinner/sun50i-a64-pine64.dts +++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-pine64.dts @@ -51,6 +51,7 @@ compatible = "pine64,pine64", "allwinner,sun50i-a64"; aliases { + ethernet0 = &emac; serial0 = &uart0; serial1 = &uart1; serial2 = &uart2; @@ -71,6 +72,15 @@ status = "okay"; }; +&emac { + pinctrl-names = "default"; + pinctrl-0 = <&rmii_pins>; + phy-mode = "rmii"; + phy-handle = <&ext_rmii_phy1>; + status = "okay"; + +}; + &i2c1 { pinctrl-names = "default"; pinctrl-0 = <&i2c1_pins>; @@ -81,6 +91,13 @@ bias-pull-up; }; +&mdio { + ext_rmii_phy1: ethernet-phy@1 { + compatible = "ethernet-phy-ieee802.3-c22"; + reg = <1>; + }; +}; + &mmc0 { pinctrl-names = "default"; pinctrl-0 = <&mmc0_pins>; diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-sopine-baseboard.dts b/arch/arm64/boot/dts/allwinner/sun50i-a64-sopine-baseboard.dts index 17ccc12b58df..0eb2acedf8c3 100644 --- a/arch/arm64/boot/dts/allwinner/sun50i-a64-sopine-baseboard.dts +++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-sopine-baseboard.dts @@ -53,6 +53,7 @@ "allwinner,sun50i-a64"; aliases { + ethernet0 = &emac; serial0 = &uart0; }; @@ -76,6 +77,21 @@ status = "okay"; }; +&emac { + pinctrl-names = "default"; + pinctrl-0 = <&rgmii_pins>; + phy-mode = "rgmii"; + phy-handle = <&ext_rgmii_phy>; + status = "okay"; +}; + +&mdio { + ext_rgmii_phy: ethernet-phy@1 { + compatible = "ethernet-phy-ieee802.3-c22"; + reg = <1>; + }; +}; + &mmc2 { pinctrl-names = "default"; pinctrl-0 = <&mmc2_pins>; diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi b/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi index 8c8db1b057df..d783d164b9c3 100644 --- a/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi +++ b/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi @@ -136,6 +136,17 @@ reg = <0x01c00000 0x1000>; }; + dma: dma-controller@1c02000 { + compatible = "allwinner,sun50i-a64-dma"; + reg = <0x01c02000 0x1000>; + interrupts = <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&ccu CLK_BUS_DMA>; + dma-channels = <8>; + dma-requests = <27>; + resets = <&ccu RST_BUS_DMA>; + #dma-cells = <1>; + }; + mmc0: mmc@1c0f000 { compatible = "allwinner,sun50i-a64-mmc"; reg = <0x01c0f000 0x1000>; @@ -178,7 +189,7 @@ #size-cells = <0>; }; - usb_otg: usb@01c19000 { + usb_otg: usb@1c19000 { compatible = "allwinner,sun8i-a33-musb"; reg = <0x01c19000 0x0400>; clocks = <&ccu CLK_BUS_OTG>; @@ -191,7 +202,7 @@ status = "disabled"; }; - usbphy: phy@01c19400 { + usbphy: phy@1c19400 { compatible = "allwinner,sun50i-a64-usb-phy"; reg = <0x01c19400 0x14>, <0x01c1a800 0x4>, @@ -211,7 +222,7 @@ #phy-cells = <1>; }; - ehci0: usb@01c1a000 { + ehci0: usb@1c1a000 { compatible = "allwinner,sun50i-a64-ehci", "generic-ehci"; reg = <0x01c1a000 0x100>; interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>; @@ -223,7 +234,7 @@ status = "disabled"; }; - ohci0: usb@01c1a400 { + ohci0: usb@1c1a400 { compatible = "allwinner,sun50i-a64-ohci", "generic-ohci"; reg = <0x01c1a400 0x100>; interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>; @@ -233,7 +244,7 @@ status = "disabled"; }; - ehci1: usb@01c1b000 { + ehci1: usb@1c1b000 { compatible = "allwinner,sun50i-a64-ehci", "generic-ehci"; reg = <0x01c1b000 0x100>; interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>; @@ -247,7 +258,7 @@ status = "disabled"; }; - ohci1: usb@01c1b400 { + ohci1: usb@1c1b400 { compatible = "allwinner,sun50i-a64-ohci", "generic-ohci"; reg = <0x01c1b400 0x100>; interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>; @@ -259,7 +270,7 @@ status = "disabled"; }; - ccu: clock@01c20000 { + ccu: clock@1c20000 { compatible = "allwinner,sun50i-a64-ccu"; reg = <0x01c20000 0x400>; clocks = <&osc24M>, <&osc32k>; @@ -325,7 +336,17 @@ drive-strength = <40>; }; - uart0_pins_a: uart0@0 { + spi0_pins: spi0 { + pins = "PC0", "PC1", "PC2", "PC3"; + function = "spi0"; + }; + + spi1_pins: spi1 { + pins = "PD0", "PD1", "PD2", "PD3"; + function = "spi1"; + }; + + uart0_pins_a: uart0 { pins = "PB8", "PB9"; function = "uart0"; }; @@ -449,6 +470,62 @@ #size-cells = <0>; }; + + spi0: spi@1c68000 { + compatible = "allwinner,sun8i-h3-spi"; + reg = <0x01c68000 0x1000>; + interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&ccu CLK_BUS_SPI0>, <&ccu CLK_SPI0>; + clock-names = "ahb", "mod"; + dmas = <&dma 23>, <&dma 23>; + dma-names = "rx", "tx"; + pinctrl-names = "default"; + pinctrl-0 = <&spi0_pins>; + resets = <&ccu RST_BUS_SPI0>; + status = "disabled"; + num-cs = <1>; + #address-cells = <1>; + #size-cells = <0>; + }; + + spi1: spi@1c69000 { + compatible = "allwinner,sun8i-h3-spi"; + reg = <0x01c69000 0x1000>; + interrupts = <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&ccu CLK_BUS_SPI1>, <&ccu CLK_SPI1>; + clock-names = "ahb", "mod"; + dmas = <&dma 24>, <&dma 24>; + dma-names = "rx", "tx"; + pinctrl-names = "default"; + pinctrl-0 = <&spi1_pins>; + resets = <&ccu RST_BUS_SPI1>; + status = "disabled"; + num-cs = <1>; + #address-cells = <1>; + #size-cells = <0>; + }; + + emac: ethernet@1c30000 { + compatible = "allwinner,sun50i-a64-emac"; + syscon = <&syscon>; + reg = <0x01c30000 0x10000>; + interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "macirq"; + resets = <&ccu RST_BUS_EMAC>; + reset-names = "stmmaceth"; + clocks = <&ccu CLK_BUS_EMAC>; + clock-names = "stmmaceth"; + status = "disabled"; + #address-cells = <1>; + #size-cells = <0>; + + mdio: mdio { + compatible = "snps,dwmac-mdio"; + #address-cells = <1>; + #size-cells = <0>; + }; + }; + gic: interrupt-controller@1c81000 { compatible = "arm,gic-400"; reg = <0x01c81000 0x1000>, @@ -486,7 +563,7 @@ #reset-cells = <1>; }; - r_pio: pinctrl@01f02c00 { + r_pio: pinctrl@1f02c00 { compatible = "allwinner,sun50i-a64-r-pinctrl"; reg = <0x01f02c00 0x400>; interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>; @@ -497,7 +574,7 @@ interrupt-controller; #interrupt-cells = <3>; - r_rsb_pins: rsb@0 { + r_rsb_pins: rsb { pins = "PL0", "PL1"; function = "s_rsb"; }; diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h5-nanopi-neo-plus2.dts b/arch/arm64/boot/dts/allwinner/sun50i-h5-nanopi-neo-plus2.dts new file mode 100644 index 000000000000..7c028af58f47 --- /dev/null +++ b/arch/arm64/boot/dts/allwinner/sun50i-h5-nanopi-neo-plus2.dts @@ -0,0 +1,193 @@ +/* + * Copyright (C) 2017 Antony Antony <antony@phenome.org> + * Copyright (C) 2016 ARM Ltd. + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/dts-v1/; +#include "sun50i-h5.dtsi" + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/input.h> +#include <dt-bindings/pinctrl/sun4i-a10.h> + +/ { + model = "FriendlyARM NanoPi NEO Plus2"; + compatible = "friendlyarm,nanopi-neo-plus2", "allwinner,sun50i-h5"; + + aliases { + serial0 = &uart0; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + leds { + compatible = "gpio-leds"; + + pwr { + label = "nanopi:green:pwr"; + gpios = <&r_pio 0 10 GPIO_ACTIVE_HIGH>; + default-state = "on"; + }; + + status { + label = "nanopi:red:status"; + gpios = <&pio 0 20 GPIO_ACTIVE_HIGH>; + }; + }; + + reg_gmac_3v3: gmac-3v3 { + compatible = "regulator-fixed"; + pinctrl-names = "default"; + regulator-name = "gmac-3v3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + startup-delay-us = <100000>; + enable-active-high; + gpio = <&pio 3 6 GPIO_ACTIVE_HIGH>; + }; + + reg_vcc3v3: vcc3v3 { + compatible = "regulator-fixed"; + regulator-name = "vcc3v3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + + vdd_cpux: gpio-regulator { + compatible = "regulator-gpio"; + pinctrl-names = "default"; + regulator-name = "vdd-cpux"; + regulator-type = "voltage"; + regulator-boot-on; + regulator-always-on; + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <1300000>; + regulator-ramp-delay = <50>; /* 4ms */ + gpios = <&r_pio 0 6 GPIO_ACTIVE_HIGH>; + gpios-states = <0x1>; + states = <1100000 0x0 + 1300000 0x1>; + }; + + wifi_pwrseq: wifi_pwrseq { + compatible = "mmc-pwrseq-simple"; + pinctrl-names = "default"; + reset-gpios = <&r_pio 0 7 GPIO_ACTIVE_LOW>; /* PL7 */ + post-power-on-delay-ms = <200>; + }; +}; + +&codec { + allwinner,audio-routing = + "Line Out", "LINEOUT", + "MIC1", "Mic", + "Mic", "MBIAS"; + status = "okay"; +}; + +&ehci0 { + status = "okay"; +}; + +&ehci3 { + status = "okay"; +}; + +&mmc0 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin>; + vmmc-supply = <®_vcc3v3>; + bus-width = <4>; + cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>; /* PF6 */ + status = "okay"; +}; + +&mmc1 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc1_pins_a>; + vmmc-supply = <®_vcc3v3>; + vqmmc-supply = <®_vcc3v3>; + mmc-pwrseq = <&wifi_pwrseq>; + bus-width = <4>; + non-removable; + status = "okay"; + + brcmf: wifi@1 { + reg = <1>; + compatible = "brcm,bcm4329-fmac"; + }; +}; + +&mmc2 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc2_8bit_pins>; + vmmc-supply = <®_vcc3v3>; + bus-width = <8>; + non-removable; + cap-mmc-hw-reset; + status = "okay"; +}; + +&ohci0 { + status = "okay"; +}; + +&ohci3 { + status = "okay"; +}; + +&uart0 { + pinctrl-names = "default"; + pinctrl-0 = <&uart0_pins_a>; + status = "okay"; +}; + +&usb_otg { + dr_mode = "host"; + status = "okay"; +}; + +&usbphy { + /* USB Type-A ports' VBUS is always on */ + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h5-nanopi-neo2.dts b/arch/arm64/boot/dts/allwinner/sun50i-h5-nanopi-neo2.dts index 1c2387bd5df6..6eb8092d8e57 100644 --- a/arch/arm64/boot/dts/allwinner/sun50i-h5-nanopi-neo2.dts +++ b/arch/arm64/boot/dts/allwinner/sun50i-h5-nanopi-neo2.dts @@ -50,6 +50,7 @@ compatible = "friendlyarm,nanopi-neo2", "allwinner,sun50i-h5"; aliases { + ethernet0 = &emac; serial0 = &uart0; }; @@ -108,6 +109,22 @@ status = "okay"; }; +&emac { + pinctrl-names = "default"; + pinctrl-0 = <&emac_rgmii_pins>; + phy-supply = <®_gmac_3v3>; + phy-handle = <&ext_rgmii_phy>; + phy-mode = "rgmii"; + status = "okay"; +}; + +&external_mdio { + ext_rgmii_phy: ethernet-phy@7 { + compatible = "ethernet-phy-ieee802.3-c22"; + reg = <7>; + }; +}; + &mmc0 { pinctrl-names = "default"; pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin>; diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h5-orangepi-pc2.dts b/arch/arm64/boot/dts/allwinner/sun50i-h5-orangepi-pc2.dts index 4f77c8470f6c..a0ca925175aa 100644 --- a/arch/arm64/boot/dts/allwinner/sun50i-h5-orangepi-pc2.dts +++ b/arch/arm64/boot/dts/allwinner/sun50i-h5-orangepi-pc2.dts @@ -59,6 +59,7 @@ }; aliases { + ethernet0 = &emac; serial0 = &uart0; }; @@ -136,6 +137,22 @@ status = "okay"; }; +&emac { + pinctrl-names = "default"; + pinctrl-0 = <&emac_rgmii_pins>; + phy-supply = <®_gmac_3v3>; + phy-handle = <&ext_rgmii_phy>; + phy-mode = "rgmii"; + status = "okay"; +}; + +&external_mdio { + ext_rgmii_phy: ethernet-phy@1 { + compatible = "ethernet-phy-ieee802.3-c22"; + reg = <1>; + }; +}; + &ir { pinctrl-names = "default"; pinctrl-0 = <&ir_pins_a>; diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h5-orangepi-prime.dts b/arch/arm64/boot/dts/allwinner/sun50i-h5-orangepi-prime.dts index 6be06873e5af..b47790650144 100644 --- a/arch/arm64/boot/dts/allwinner/sun50i-h5-orangepi-prime.dts +++ b/arch/arm64/boot/dts/allwinner/sun50i-h5-orangepi-prime.dts @@ -54,6 +54,7 @@ compatible = "xunlong,orangepi-prime", "allwinner,sun50i-h5"; aliases { + ethernet0 = &emac; serial0 = &uart0; }; @@ -143,6 +144,22 @@ status = "okay"; }; +&emac { + pinctrl-names = "default"; + pinctrl-0 = <&emac_rgmii_pins>; + phy-supply = <®_gmac_3v3>; + phy-handle = <&ext_rgmii_phy>; + phy-mode = "rgmii"; + status = "okay"; +}; + +&external_mdio { + ext_rgmii_phy: ethernet-phy@1 { + compatible = "ethernet-phy-ieee802.3-c22"; + reg = <1>; + }; +}; + &ir { pinctrl-names = "default"; pinctrl-0 = <&ir_pins_a>; diff --git a/arch/arm64/boot/dts/altera/socfpga_stratix10.dtsi b/arch/arm64/boot/dts/altera/socfpga_stratix10.dtsi index c2b9bcb0ef61..7c9bdc7ab50b 100644 --- a/arch/arm64/boot/dts/altera/socfpga_stratix10.dtsi +++ b/arch/arm64/boot/dts/altera/socfpga_stratix10.dtsi @@ -15,6 +15,8 @@ */ /dts-v1/; +#include <dt-bindings/reset/altr,rst-mgr-s10.h> +#include <dt-bindings/gpio/gpio.h> / { compatible = "altr,socfpga-stratix10"; @@ -75,10 +77,10 @@ compatible = "arm,gic-400", "arm,cortex-a15-gic"; #interrupt-cells = <3>; interrupt-controller; - reg = <0x0 0xfffc1000 0x1000>, - <0x0 0xfffc2000 0x2000>, - <0x0 0xfffc4000 0x2000>, - <0x0 0xfffc6000 0x2000>; + reg = <0x0 0xfffc1000 0x0 0x1000>, + <0x0 0xfffc2000 0x0 0x2000>, + <0x0 0xfffc4000 0x0 0x2000>, + <0x0 0xfffc6000 0x0 0x2000>; }; soc { @@ -100,6 +102,8 @@ interrupts = <0 90 4>; interrupt-names = "macirq"; mac-address = [00 00 00 00 00 00]; + resets = <&rst EMAC0_RESET>; + reset-names = "stmmaceth"; status = "disabled"; }; @@ -109,6 +113,8 @@ interrupts = <0 91 4>; interrupt-names = "macirq"; mac-address = [00 00 00 00 00 00]; + resets = <&rst EMAC1_RESET>; + reset-names = "stmmaceth"; status = "disabled"; }; @@ -118,6 +124,8 @@ interrupts = <0 92 4>; interrupt-names = "macirq"; mac-address = [00 00 00 00 00 00]; + resets = <&rst EMAC2_RESET>; + reset-names = "stmmaceth"; status = "disabled"; }; @@ -126,6 +134,7 @@ #size-cells = <0>; compatible = "snps,dw-apb-gpio"; reg = <0xffc03200 0x100>; + resets = <&rst GPIO0_RESET>; status = "disabled"; porta: gpio-controller@0 { @@ -145,6 +154,7 @@ #size-cells = <0>; compatible = "snps,dw-apb-gpio"; reg = <0xffc03300 0x100>; + resets = <&rst GPIO1_RESET>; status = "disabled"; portb: gpio-controller@0 { @@ -155,7 +165,7 @@ reg = <0>; interrupt-controller; #interrupt-cells = <2>; - interrupts = <0 110 4>; + interrupts = <0 111 4>; }; }; @@ -165,6 +175,7 @@ compatible = "snps,designware-i2c"; reg = <0xffc02800 0x100>; interrupts = <0 103 4>; + resets = <&rst I2C0_RESET>; status = "disabled"; }; @@ -174,6 +185,7 @@ compatible = "snps,designware-i2c"; reg = <0xffc02900 0x100>; interrupts = <0 104 4>; + resets = <&rst I2C1_RESET>; status = "disabled"; }; @@ -183,6 +195,7 @@ compatible = "snps,designware-i2c"; reg = <0xffc02a00 0x100>; interrupts = <0 105 4>; + resets = <&rst I2C2_RESET>; status = "disabled"; }; @@ -192,6 +205,7 @@ compatible = "snps,designware-i2c"; reg = <0xffc02b00 0x100>; interrupts = <0 106 4>; + resets = <&rst I2C3_RESET>; status = "disabled"; }; @@ -201,6 +215,7 @@ compatible = "snps,designware-i2c"; reg = <0xffc02c00 0x100>; interrupts = <0 107 4>; + resets = <&rst I2C4_RESET>; status = "disabled"; }; @@ -211,6 +226,8 @@ reg = <0xff808000 0x1000>; interrupts = <0 96 4>; fifo-depth = <0x400>; + resets = <&rst SDMMC_RESET>; + reset-names = "reset"; status = "disabled"; }; @@ -223,6 +240,7 @@ #reset-cells = <1>; compatible = "altr,rst-mgr"; reg = <0xffd11000 0x1000>; + altr,modrst-offset = <0x20>; }; spi0: spi@ffda4000 { @@ -291,6 +309,7 @@ interrupts = <0 108 4>; reg-shift = <2>; reg-io-width = <4>; + resets = <&rst UART0_RESET>; status = "disabled"; }; @@ -300,6 +319,7 @@ interrupts = <0 109 4>; reg-shift = <2>; reg-io-width = <4>; + resets = <&rst UART1_RESET>; status = "disabled"; }; @@ -315,6 +335,8 @@ interrupts = <0 93 4>; phys = <&usbphy0>; phy-names = "usb2-phy"; + resets = <&rst USB0_RESET>; + reset-names = "dwc2"; status = "disabled"; }; @@ -324,6 +346,8 @@ interrupts = <0 94 4>; phys = <&usbphy0>; phy-names = "usb2-phy"; + resets = <&rst USB1_RESET>; + reset-names = "dwc2"; status = "disabled"; }; @@ -331,6 +355,7 @@ compatible = "snps,dw-wdt"; reg = <0xffd00200 0x100>; interrupts = <0 117 4>; + resets = <&rst WATCHDOG0_RESET>; status = "disabled"; }; @@ -338,6 +363,7 @@ compatible = "snps,dw-wdt"; reg = <0xffd00300 0x100>; interrupts = <0 118 4>; + resets = <&rst WATCHDOG1_RESET>; status = "disabled"; }; @@ -345,6 +371,7 @@ compatible = "snps,dw-wdt"; reg = <0xffd00400 0x100>; interrupts = <0 125 4>; + resets = <&rst WATCHDOG2_RESET>; status = "disabled"; }; @@ -352,6 +379,7 @@ compatible = "snps,dw-wdt"; reg = <0xffd00500 0x100>; interrupts = <0 126 4>; + resets = <&rst WATCHDOG3_RESET>; status = "disabled"; }; }; diff --git a/arch/arm64/boot/dts/altera/socfpga_stratix10_socdk.dts b/arch/arm64/boot/dts/altera/socfpga_stratix10_socdk.dts index 41ea2dba2fce..a37c46112876 100644 --- a/arch/arm64/boot/dts/altera/socfpga_stratix10_socdk.dts +++ b/arch/arm64/boot/dts/altera/socfpga_stratix10_socdk.dts @@ -14,7 +14,7 @@ * this program. If not, see <http://www.gnu.org/licenses/>. */ -/include/ "socfpga_stratix10.dtsi" +#include "socfpga_stratix10.dtsi" / { model = "SoCFPGA Stratix 10 SoCDK"; @@ -27,6 +27,24 @@ stdout-path = "serial0:115200n8"; }; + leds { + compatible = "gpio-leds"; + hps0 { + label = "hps_led0"; + gpios = <&portb 20 GPIO_ACTIVE_HIGH>; + }; + + hps1 { + label = "hps_led1"; + gpios = <&portb 19 GPIO_ACTIVE_HIGH>; + }; + + hps2 { + label = "hps_led2"; + gpios = <&portb 21 GPIO_ACTIVE_HIGH>; + }; + }; + memory { device_type = "memory"; /* We expect the bootloader to fill in the reg */ @@ -34,6 +52,48 @@ }; }; +&gpio1 { + status = "okay"; +}; + +&gmac0 { + status = "okay"; + phy-mode = "rgmii"; + phy-handle = <&phy0>; + + max-frame-size = <3800>; + + mdio0 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "snps,dwmac-mdio"; + phy0: ethernet-phy@0 { + reg = <4>; + + txd0-skew-ps = <0>; /* -420ps */ + txd1-skew-ps = <0>; /* -420ps */ + txd2-skew-ps = <0>; /* -420ps */ + txd3-skew-ps = <0>; /* -420ps */ + rxd0-skew-ps = <420>; /* 0ps */ + rxd1-skew-ps = <420>; /* 0ps */ + rxd2-skew-ps = <420>; /* 0ps */ + rxd3-skew-ps = <420>; /* 0ps */ + txen-skew-ps = <0>; /* -420ps */ + txc-skew-ps = <1860>; /* 960ps */ + rxdv-skew-ps = <420>; /* 0ps */ + rxc-skew-ps = <1680>; /* 780ps */ + }; + }; +}; + +&mmc { + status = "okay"; + num-slots = <1>; + cap-sd-highspeed; + broken-cd; + bus-width = <4>; +}; + &uart0 { status = "okay"; }; diff --git a/arch/arm64/boot/dts/amlogic/Makefile b/arch/arm64/boot/dts/amlogic/Makefile index f84b83bb9809..34dd0e9b5cbb 100644 --- a/arch/arm64/boot/dts/amlogic/Makefile +++ b/arch/arm64/boot/dts/amlogic/Makefile @@ -1,4 +1,5 @@ # SPDX-License-Identifier: GPL-2.0 +dtb-$(CONFIG_ARCH_MESON) += meson-axg-s400.dtb dtb-$(CONFIG_ARCH_MESON) += meson-gxbb-nanopi-k2.dtb dtb-$(CONFIG_ARCH_MESON) += meson-gxbb-nexbox-a95x.dtb dtb-$(CONFIG_ARCH_MESON) += meson-gxbb-odroidc2.dtb @@ -16,7 +17,9 @@ dtb-$(CONFIG_ARCH_MESON) += meson-gxl-s905x-nexbox-a95x.dtb dtb-$(CONFIG_ARCH_MESON) += meson-gxl-s905x-p212.dtb dtb-$(CONFIG_ARCH_MESON) += meson-gxl-s905d-p230.dtb dtb-$(CONFIG_ARCH_MESON) += meson-gxl-s905d-p231.dtb +dtb-$(CONFIG_ARCH_MESON) += meson-gxm-khadas-vim2.dtb dtb-$(CONFIG_ARCH_MESON) += meson-gxm-nexbox-a1.dtb dtb-$(CONFIG_ARCH_MESON) += meson-gxm-q200.dtb dtb-$(CONFIG_ARCH_MESON) += meson-gxm-q201.dtb dtb-$(CONFIG_ARCH_MESON) += meson-gxm-rbox-pro.dtb +dtb-$(CONFIG_ARCH_MESON) += meson-gxm-vega-s96.dtb diff --git a/arch/arm64/boot/dts/amlogic/meson-axg-s400.dts b/arch/arm64/boot/dts/amlogic/meson-axg-s400.dts new file mode 100644 index 000000000000..70eca1f8736a --- /dev/null +++ b/arch/arm64/boot/dts/amlogic/meson-axg-s400.dts @@ -0,0 +1,22 @@ +/* + * Copyright (c) 2017 Amlogic, Inc. All rights reserved. + * + * SPDX-License-Identifier: (GPL-2.0+ OR MIT) + */ + +/dts-v1/; + +#include "meson-axg.dtsi" + +/ { + compatible = "amlogic,s400", "amlogic,a113d", "amlogic,meson-axg"; + model = "Amlogic Meson AXG S400 Development Board"; + + aliases { + serial0 = &uart_AO; + }; +}; + +&uart_AO { + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/amlogic/meson-axg.dtsi b/arch/arm64/boot/dts/amlogic/meson-axg.dtsi new file mode 100644 index 000000000000..b932a784b02a --- /dev/null +++ b/arch/arm64/boot/dts/amlogic/meson-axg.dtsi @@ -0,0 +1,204 @@ +/* + * Copyright (c) 2017 Amlogic, Inc. All rights reserved. + * + * SPDX-License-Identifier: (GPL-2.0+ OR MIT) + */ + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/interrupt-controller/irq.h> +#include <dt-bindings/interrupt-controller/arm-gic.h> + +/ { + compatible = "amlogic,meson-axg"; + + interrupt-parent = <&gic>; + #address-cells = <2>; + #size-cells = <2>; + + reserved-memory { + #address-cells = <2>; + #size-cells = <2>; + ranges; + + /* 16 MiB reserved for Hardware ROM Firmware */ + hwrom_reserved: hwrom@0 { + reg = <0x0 0x0 0x0 0x1000000>; + no-map; + }; + + /* Alternate 3 MiB reserved for ARM Trusted Firmware (BL31) */ + secmon_reserved: secmon@5000000 { + reg = <0x0 0x05000000 0x0 0x300000>; + no-map; + }; + }; + + cpus { + #address-cells = <0x2>; + #size-cells = <0x0>; + + cpu0: cpu@0 { + device_type = "cpu"; + compatible = "arm,cortex-a53", "arm,armv8"; + reg = <0x0 0x0>; + enable-method = "psci"; + next-level-cache = <&l2>; + }; + + cpu1: cpu@1 { + device_type = "cpu"; + compatible = "arm,cortex-a53", "arm,armv8"; + reg = <0x0 0x1>; + enable-method = "psci"; + next-level-cache = <&l2>; + }; + + cpu2: cpu@2 { + device_type = "cpu"; + compatible = "arm,cortex-a53", "arm,armv8"; + reg = <0x0 0x2>; + enable-method = "psci"; + next-level-cache = <&l2>; + }; + + cpu3: cpu@3 { + device_type = "cpu"; + compatible = "arm,cortex-a53", "arm,armv8"; + reg = <0x0 0x3>; + enable-method = "psci"; + next-level-cache = <&l2>; + }; + + l2: l2-cache0 { + compatible = "cache"; + }; + }; + + arm-pmu { + compatible = "arm,cortex-a53-pmu"; + interrupts = <GIC_SPI 137 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 153 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 154 IRQ_TYPE_LEVEL_HIGH>; + interrupt-affinity = <&cpu0>, <&cpu1>, <&cpu2>, <&cpu3>; + }; + + psci { + compatible = "arm,psci-1.0"; + method = "smc"; + }; + + timer { + compatible = "arm,armv8-timer"; + interrupts = <GIC_PPI 13 + (GIC_CPU_MASK_RAW(0xff) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 14 + (GIC_CPU_MASK_RAW(0xff) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 11 + (GIC_CPU_MASK_RAW(0xff) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 10 + (GIC_CPU_MASK_RAW(0xff) | IRQ_TYPE_LEVEL_LOW)>; + }; + + xtal: xtal-clk { + compatible = "fixed-clock"; + clock-frequency = <24000000>; + clock-output-names = "xtal"; + #clock-cells = <0>; + }; + + soc { + compatible = "simple-bus"; + #address-cells = <2>; + #size-cells = <2>; + ranges; + + cbus: cbus@ffd00000 { + compatible = "simple-bus"; + reg = <0x0 0xffd00000 0x0 0x25000>; + #address-cells = <2>; + #size-cells = <2>; + ranges = <0x0 0x0 0x0 0xffd00000 0x0 0x25000>; + + uart_A: serial@24000 { + compatible = "amlogic,meson-gx-uart", "amlogic,meson-uart"; + reg = <0x0 0x24000 0x0 0x14>; + interrupts = <GIC_SPI 26 IRQ_TYPE_EDGE_RISING>; + status = "disabled"; + }; + + uart_B: serial@23000 { + compatible = "amlogic,meson-gx-uart", "amlogic,meson-uart"; + reg = <0x0 0x23000 0x0 0x14>; + interrupts = <GIC_SPI 75 IRQ_TYPE_EDGE_RISING>; + status = "disabled"; + }; + }; + + gic: interrupt-controller@ffc01000 { + compatible = "arm,gic-400"; + reg = <0x0 0xffc01000 0 0x1000>, + <0x0 0xffc02000 0 0x2000>, + <0x0 0xffc04000 0 0x2000>, + <0x0 0xffc06000 0 0x2000>; + interrupt-controller; + interrupts = <GIC_PPI 9 + (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_HIGH)>; + #interrupt-cells = <3>; + #address-cells = <0>; + }; + + mailbox: mailbox@ff63dc00 { + compatible = "amlogic,meson-gx-mhu", "amlogic,meson-gxbb-mhu"; + reg = <0 0xff63dc00 0 0x400>; + interrupts = <GIC_SPI 208 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 209 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 210 IRQ_TYPE_EDGE_RISING>; + #mbox-cells = <1>; + }; + + sram: sram@fffc0000 { + compatible = "amlogic,meson-axg-sram", "mmio-sram"; + reg = <0x0 0xfffc0000 0x0 0x20000>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x0 0xfffc0000 0x20000>; + + cpu_scp_lpri: scp-shmem@0 { + compatible = "amlogic,meson-axg-scp-shmem"; + reg = <0x13000 0x400>; + }; + + cpu_scp_hpri: scp-shmem@200 { + compatible = "amlogic,meson-axg-scp-shmem"; + reg = <0x13400 0x400>; + }; + }; + + aobus: aobus@ff800000 { + compatible = "simple-bus"; + reg = <0x0 0xff800000 0x0 0x100000>; + #address-cells = <2>; + #size-cells = <2>; + ranges = <0x0 0x0 0x0 0xff800000 0x0 0x100000>; + + uart_AO: serial@3000 { + compatible = "amlogic,meson-gx-uart", "amlogic,meson-ao-uart"; + reg = <0x0 0x3000 0x0 0x18>; + interrupts = <GIC_SPI 193 IRQ_TYPE_EDGE_RISING>; + clocks = <&xtal>, <&xtal>, <&xtal>; + clock-names = "xtal", "pclk", "baud"; + status = "disabled"; + }; + + uart_AO_B: serial@4000 { + compatible = "amlogic,meson-gx-uart", "amlogic,meson-ao-uart"; + reg = <0x0 0x4000 0x0 0x18>; + interrupts = <GIC_SPI 197 IRQ_TYPE_EDGE_RISING>; + clocks = <&xtal>, <&xtal>, <&xtal>; + clock-names = "xtal", "pclk", "baud"; + status = "disabled"; + }; + }; + }; +}; diff --git a/arch/arm64/boot/dts/amlogic/meson-gx-p23x-q20x.dtsi b/arch/arm64/boot/dts/amlogic/meson-gx-p23x-q20x.dtsi index 4157987f4a3d..7d4b95e49993 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gx-p23x-q20x.dtsi +++ b/arch/arm64/boot/dts/amlogic/meson-gx-p23x-q20x.dtsi @@ -213,7 +213,7 @@ /* eMMC */ &sd_emmc_c { status = "okay"; - pinctrl-0 = <&emmc_pins>; + pinctrl-0 = <&emmc_pins>, <&emmc_ds_pins>; pinctrl-1 = <&emmc_clk_gate_pins>; pinctrl-names = "default", "clk-gate"; diff --git a/arch/arm64/boot/dts/amlogic/meson-gx.dtsi b/arch/arm64/boot/dts/amlogic/meson-gx.dtsi index f175db846286..ab7ce1644cdc 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gx.dtsi +++ b/arch/arm64/boot/dts/amlogic/meson-gx.dtsi @@ -218,6 +218,15 @@ #size-cells = <2>; ranges = <0x0 0x0 0x0 0xc1100000 0x0 0x100000>; + gpio_intc: interrupt-controller@9880 { + compatible = "amlogic,meson-gpio-intc"; + reg = <0x0 0x9880 0x0 0x10>; + interrupt-controller; + #interrupt-cells = <2>; + amlogic,channel-interrupts = <64 65 66 67 68 69 70 71>; + status = "disabled"; + }; + reset: reset-controller@4404 { compatible = "amlogic,meson-gx-reset", "amlogic,meson-gxbb-reset"; reg = <0x0 0x04404 0x0 0x20>; @@ -225,18 +234,16 @@ }; uart_A: serial@84c0 { - compatible = "amlogic,meson-gx-uart", "amlogic,meson-uart"; + compatible = "amlogic,meson-gx-uart"; reg = <0x0 0x84c0 0x0 0x14>; interrupts = <GIC_SPI 26 IRQ_TYPE_EDGE_RISING>; - clocks = <&xtal>; status = "disabled"; }; uart_B: serial@84dc { - compatible = "amlogic,meson-gx-uart", "amlogic,meson-uart"; + compatible = "amlogic,meson-gx-uart"; reg = <0x0 0x84dc 0x0 0x14>; interrupts = <GIC_SPI 75 IRQ_TYPE_EDGE_RISING>; - clocks = <&xtal>; status = "disabled"; }; @@ -279,10 +286,9 @@ }; uart_C: serial@8700 { - compatible = "amlogic,meson-gx-uart", "amlogic,meson-uart"; + compatible = "amlogic,meson-gx-uart"; reg = <0x0 0x8700 0x0 0x14>; interrupts = <GIC_SPI 93 IRQ_TYPE_EDGE_RISING>; - clocks = <&xtal>; status = "disabled"; }; @@ -391,14 +397,14 @@ }; uart_AO: serial@4c0 { - compatible = "amlogic,meson-gx-uart", "amlogic,meson-ao-uart", "amlogic,meson-uart"; + compatible = "amlogic,meson-gx-uart", "amlogic,meson-ao-uart"; reg = <0x0 0x004c0 0x0 0x14>; interrupts = <GIC_SPI 193 IRQ_TYPE_EDGE_RISING>; status = "disabled"; }; uart_AO_B: serial@4e0 { - compatible = "amlogic,meson-gx-uart", "amlogic,meson-ao-uart", "amlogic,meson-uart"; + compatible = "amlogic,meson-gx-uart", "amlogic,meson-ao-uart"; reg = <0x0 0x004e0 0x0 0x14>; interrupts = <GIC_SPI 197 IRQ_TYPE_EDGE_RISING>; status = "disabled"; diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb-nanopi-k2.dts b/arch/arm64/boot/dts/amlogic/meson-gxbb-nanopi-k2.dts index 4b17a76959b2..4a4251001bfd 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gxbb-nanopi-k2.dts +++ b/arch/arm64/boot/dts/amlogic/meson-gxbb-nanopi-k2.dts @@ -168,6 +168,8 @@ eth_phy0: ethernet-phy@0 { /* Realtek RTL8211F (0x001cc916) */ reg = <0>; + interrupt-parent = <&gpio_intc>; + interrupts = <29 IRQ_TYPE_LEVEL_LOW>; }; }; }; @@ -183,7 +185,9 @@ "VCCK En", "CON1 Header Pin31", "I2S Header Pin6", "IR In", "I2S Header Pin7", "I2S Header Pin3", "I2S Header Pin4", - "I2S Header Pin5", "HDMI CEC", "SYS LED"; + "I2S Header Pin5", "HDMI CEC", "SYS LED", + /* GPIO_TEST_N */ + ""; }; &pinctrl_periphs { @@ -229,11 +233,9 @@ "Bluetooth UART TX", "Bluetooth UART RX", "Bluetooth UART CTS", "Bluetooth UART RTS", "", "", "", "WIFI 32K", "Bluetooth Enable", - "Bluetooth WAKE HOST", + "Bluetooth WAKE HOST", "", /* Bank GPIOCLK */ - "", "CON1 Header Pin35", "", "", - /* GPIO_TEST_N */ - ""; + "", "CON1 Header Pin35", "", ""; }; &pwm_ef { @@ -302,7 +304,7 @@ /* eMMC */ &sd_emmc_c { status = "disabled"; - pinctrl-0 = <&emmc_pins>; + pinctrl-0 = <&emmc_pins>, <&emmc_ds_pins>; pinctrl-1 = <&emmc_clk_gate_pins>; pinctrl-names = "default", "clk-gate"; diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb-nexbox-a95x.dts b/arch/arm64/boot/dts/amlogic/meson-gxbb-nexbox-a95x.dts index 38dfdde5c147..818954b1d57f 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gxbb-nexbox-a95x.dts +++ b/arch/arm64/boot/dts/amlogic/meson-gxbb-nexbox-a95x.dts @@ -88,6 +88,18 @@ }; }; + usb_pwr: regulator-usb-pwrs { + compatible = "regulator-fixed"; + + regulator-name = "USB_PWR"; + + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + + gpio = <&gpio GPIODV_24 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + vddio_card: gpio-regulator { compatible = "regulator-gpio"; @@ -272,7 +284,7 @@ /* eMMC */ &sd_emmc_c { status = "okay"; - pinctrl-0 = <&emmc_pins>; + pinctrl-0 = <&emmc_pins>, <&emmc_ds_pins>; pinctrl-1 = <&emmc_clk_gate_pins>; pinctrl-names = "default", "clk-gate"; @@ -294,3 +306,20 @@ pinctrl-0 = <&uart_ao_a_pins>; pinctrl-names = "default"; }; + +&usb0_phy { + status = "okay"; + phy-supply = <&usb_pwr>; +}; + +&usb1_phy { + status = "okay"; +}; + +&usb0 { + status = "okay"; +}; + +&usb1 { + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb-odroidc2.dts b/arch/arm64/boot/dts/amlogic/meson-gxbb-odroidc2.dts index 1ffa1c238a72..f8d221463c60 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gxbb-odroidc2.dts +++ b/arch/arm64/boot/dts/amlogic/meson-gxbb-odroidc2.dts @@ -157,6 +157,8 @@ eth_phy0: ethernet-phy@0 { reg = <0>; + interrupt-parent = <&gpio_intc>; + interrupts = <29 IRQ_TYPE_LEVEL_LOW>; eee-broken-1000t; }; }; @@ -194,7 +196,9 @@ "USB HUB nRESET", "USB OTG Power En", "J7 Header Pin2", "IR In", "J7 Header Pin4", "J7 Header Pin6", "J7 Header Pin5", "J7 Header Pin7", - "HDMI CEC", "SYS LED"; + "HDMI CEC", "SYS LED", + /* GPIO_TEST_N */ + ""; }; &pinctrl_periphs { @@ -233,11 +237,9 @@ "J2 Header Pin12", "J2 Header Pin13", "J2 Header Pin8", "J2 Header Pin10", "", "", "", "", "", - "J2 Header Pin11", "", "J2 Header Pin7", + "J2 Header Pin11", "", "J2 Header Pin7", "", /* Bank GPIOCLK */ - "", "", "", "", - /* GPIO_TEST_N */ - ""; + "", "", "", ""; }; &saradc { @@ -271,7 +273,7 @@ /* eMMC */ &sd_emmc_c { status = "okay"; - pinctrl-0 = <&emmc_pins>; + pinctrl-0 = <&emmc_pins>, <&emmc_ds_pins>; pinctrl-1 = <&emmc_clk_gate_pins>; pinctrl-names = "default", "clk-gate"; @@ -301,6 +303,7 @@ &usb1_phy { status = "okay"; + phy-supply = <&usb_otg_pwr>; }; &usb0 { diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb-p200.dts b/arch/arm64/boot/dts/amlogic/meson-gxbb-p200.dts index 2054a474e0a9..9bf16bb7c491 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gxbb-p200.dts +++ b/arch/arm64/boot/dts/amlogic/meson-gxbb-p200.dts @@ -117,6 +117,8 @@ eth_phy0: ethernet-phy@3 { /* Micrel KSZ9031 (0x00221620) */ reg = <3>; + interrupt-parent = <&gpio_intc>; + interrupts = <29 IRQ_TYPE_LEVEL_LOW>; }; }; }; diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb-p20x.dtsi b/arch/arm64/boot/dts/amlogic/meson-gxbb-p20x.dtsi index 23c08c3afd0a..932158a778ef 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gxbb-p20x.dtsi +++ b/arch/arm64/boot/dts/amlogic/meson-gxbb-p20x.dtsi @@ -242,7 +242,7 @@ /* eMMC */ &sd_emmc_c { status = "okay"; - pinctrl-0 = <&emmc_pins>; + pinctrl-0 = <&emmc_pins>, <&emmc_ds_pins>; pinctrl-1 = <&emmc_clk_gate_pins>; pinctrl-names = "default", "clk-gate"; diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb-vega-s95.dtsi b/arch/arm64/boot/dts/amlogic/meson-gxbb-vega-s95.dtsi index f2bc6dea1fc6..1fe8e24cf675 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gxbb-vega-s95.dtsi +++ b/arch/arm64/boot/dts/amlogic/meson-gxbb-vega-s95.dtsi @@ -199,7 +199,7 @@ /* eMMC */ &sd_emmc_c { status = "okay"; - pinctrl-0 = <&emmc_pins>; + pinctrl-0 = <&emmc_pins>, <&emmc_ds_pins>; pinctrl-1 = <&emmc_clk_gate_pins>; pinctrl-names = "default", "clk-gate"; diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi b/arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi index af834cdbba79..ead895a4e9a5 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi +++ b/arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi @@ -323,6 +323,12 @@ clock-names = "stmmaceth", "clkin0", "clkin1"; }; +&gpio_intc { + compatible = "amlogic,meson-gpio-intc", + "amlogic,meson-gxbb-gpio-intc"; + status = "okay"; +}; + &hdmi_tx { compatible = "amlogic,meson-gxbb-dw-hdmi", "amlogic,meson-gx-dw-hdmi"; resets = <&reset RESET_HDMITX_CAPB3>, @@ -379,15 +385,21 @@ reg-names = "mux", "pull", "pull-enable", "gpio"; gpio-controller; #gpio-cells = <2>; - gpio-ranges = <&pinctrl_periphs 0 14 120>; + gpio-ranges = <&pinctrl_periphs 0 0 119>; }; emmc_pins: emmc { mux { groups = "emmc_nand_d07", "emmc_cmd", - "emmc_clk", - "emmc_ds"; + "emmc_clk"; + function = "emmc"; + }; + }; + + emmc_ds_pins: emmc-ds { + mux { + groups = "emmc_ds"; function = "emmc"; }; }; diff --git a/arch/arm64/boot/dts/amlogic/meson-gxl-s905d-p230.dts b/arch/arm64/boot/dts/amlogic/meson-gxl-s905d-p230.dts index 6827f235d7cf..4f3f03fc31b0 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gxl-s905d-p230.dts +++ b/arch/arm64/boot/dts/amlogic/meson-gxl-s905d-p230.dts @@ -128,6 +128,8 @@ compatible = "ethernet-phy-id001c.c916", "ethernet-phy-ieee802.3-c22"; reg = <0>; max-speed = <1000>; + interrupt-parent = <&gpio_intc>; + interrupts = <29 IRQ_TYPE_LEVEL_LOW>; }; }; diff --git a/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-hwacom-amazetv.dts b/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-hwacom-amazetv.dts index 977b4240f3c1..e82582574160 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-hwacom-amazetv.dts +++ b/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-hwacom-amazetv.dts @@ -141,7 +141,7 @@ /* eMMC */ &sd_emmc_c { status = "okay"; - pinctrl-0 = <&emmc_pins>; + pinctrl-0 = <&emmc_pins>, <&emmc_ds_pins>; pinctrl-1 = <&emmc_clk_gate_pins>; pinctrl-names = "default", "clk-gate"; diff --git a/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-khadas-vim.dts b/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-khadas-vim.dts index edc512ad0bac..71a6e1ce7ad5 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-khadas-vim.dts +++ b/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-khadas-vim.dts @@ -122,7 +122,9 @@ "J9 Header Pin33", "IR In", "HDMI CEC", - "SYS LED"; + "SYS LED", + /* GPIO_TEST_N */ + ""; }; &pinctrl_periphs { @@ -163,9 +165,7 @@ "WIFI 32K", "Bluetooth Enable", "Bluetooth WAKE HOST", /* Bank GPIOCLK */ - "", "J9 Header Pin39", - /* GPIO_TEST_N */ - ""; + "", "J9 Header Pin39"; }; &pwm_AO_ab { diff --git a/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-libretech-cc.dts b/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-libretech-cc.dts index 64c54c92e214..dc9c3b8216c2 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-libretech-cc.dts +++ b/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-libretech-cc.dts @@ -96,6 +96,13 @@ regulator-settling-time-down-us = <50000>; }; + vddio_ao18: regulator-vddio_ao18 { + compatible = "regulator-fixed"; + regulator-name = "VDDIO_AO18"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + vddio_boot: regulator-vddio_boot { compatible = "regulator-fixed"; regulator-name = "VDDIO_BOOT"; @@ -121,6 +128,11 @@ status = "okay"; }; +&internal_phy { + pinctrl-0 = <ð_link_led_pins>, <ð_act_led_pins>; + pinctrl-names = "default"; +}; + &ir { status = "okay"; pinctrl-0 = <&remote_input_ao_pins>; @@ -149,7 +161,9 @@ "7J1 Header Pin12", "IR In", "9J3 Switch HDMI CEC/7J1 Header Pin11", - "7J1 Header Pin13"; + "7J1 Header Pin13", + /* GPIO_TEST_N */ + "7J1 Header Pin15"; }; &pinctrl_periphs { @@ -191,9 +205,12 @@ "7J1 Header Pin32", "7J1 Header Pin29", "7J1 Header Pin31", /* Bank GPIOCLK */ - "7J1 Header Pin7", "", - /* GPIO_TEST_N */ - "7J1 Header Pin15"; + "7J1 Header Pin7", ""; +}; + +&saradc { + status = "okay"; + vref-supply = <&vddio_ao18>; }; /* SD card */ @@ -221,7 +238,7 @@ /* eMMC */ &sd_emmc_c { status = "okay"; - pinctrl-0 = <&emmc_pins>; + pinctrl-0 = <&emmc_pins>, <&emmc_ds_pins>; pinctrl-1 = <&emmc_clk_gate_pins>; pinctrl-names = "default", "clk-gate"; diff --git a/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-nexbox-a95x.dts b/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-nexbox-a95x.dts index 1b8f32867aa1..271f14279180 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-nexbox-a95x.dts +++ b/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-nexbox-a95x.dts @@ -229,7 +229,7 @@ /* eMMC */ &sd_emmc_c { status = "okay"; - pinctrl-0 = <&emmc_pins>; + pinctrl-0 = <&emmc_pins>, <&emmc_ds_pins>; pinctrl-1 = <&emmc_clk_gate_pins>; pinctrl-names = "default", "clk-gate"; diff --git a/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-p212.dtsi b/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-p212.dtsi index 129af9068814..ff09df1fd5a3 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-p212.dtsi +++ b/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-p212.dtsi @@ -135,7 +135,7 @@ /* eMMC */ &sd_emmc_c { status = "okay"; - pinctrl-0 = <&emmc_pins>; + pinctrl-0 = <&emmc_pins>, <&emmc_ds_pins>; pinctrl-1 = <&emmc_clk_gate_pins>; pinctrl-names = "default", "clk-gate"; diff --git a/arch/arm64/boot/dts/amlogic/meson-gxl.dtsi b/arch/arm64/boot/dts/amlogic/meson-gxl.dtsi index d8dd3298b15c..8ed981f59e5a 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gxl.dtsi +++ b/arch/arm64/boot/dts/amlogic/meson-gxl.dtsi @@ -49,6 +49,14 @@ / { compatible = "amlogic,meson-gxl"; + + reserved-memory { + /* Alternate 3 MiB reserved for ARM Trusted Firmware (BL31) */ + secmon_reserved_alt: secmon@5000000 { + reg = <0x0 0x05000000 0x0 0x300000>; + no-map; + }; + }; }; ðmac { @@ -217,6 +225,12 @@ compatible = "amlogic,meson-gxl-aoclkc", "amlogic,meson-gx-aoclkc"; }; +&gpio_intc { + compatible = "amlogic,meson-gpio-intc", + "amlogic,meson-gxl-gpio-intc"; + status = "okay"; +}; + &hdmi_tx { compatible = "amlogic,meson-gxl-dw-hdmi", "amlogic,meson-gx-dw-hdmi"; resets = <&reset RESET_HDMITX_CAPB3>, @@ -268,15 +282,21 @@ reg-names = "mux", "pull", "pull-enable", "gpio"; gpio-controller; #gpio-cells = <2>; - gpio-ranges = <&pinctrl_periphs 0 10 101>; + gpio-ranges = <&pinctrl_periphs 0 0 100>; }; emmc_pins: emmc { mux { groups = "emmc_nand_d07", "emmc_cmd", - "emmc_clk", - "emmc_ds"; + "emmc_clk"; + function = "emmc"; + }; + }; + + emmc_ds_pins: emmc-ds { + mux { + groups = "emmc_ds"; function = "emmc"; }; }; diff --git a/arch/arm64/boot/dts/amlogic/meson-gxm-khadas-vim2.dts b/arch/arm64/boot/dts/amlogic/meson-gxm-khadas-vim2.dts new file mode 100644 index 000000000000..34a41b26a4ed --- /dev/null +++ b/arch/arm64/boot/dts/amlogic/meson-gxm-khadas-vim2.dts @@ -0,0 +1,400 @@ +/* + * Copyright (c) 2017 Martin Blumenstingl <martin.blumenstingl@googlemail.com>. + * Copyright (c) 2017 BayLibre, SAS + * Author: Neil Armstrong <narmstrong@baylibre.com> + * + * SPDX-License-Identifier: (GPL-2.0+ OR MIT) + */ + +/dts-v1/; + +#include <dt-bindings/input/input.h> +#include <dt-bindings/thermal/thermal.h> + +#include "meson-gxm.dtsi" + +/ { + compatible = "khadas,vim2", "amlogic,s912", "amlogic,meson-gxm"; + model = "Khadas VIM2"; + + aliases { + serial0 = &uart_AO; + serial1 = &uart_A; + serial2 = &uart_AO_B; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + memory@0 { + device_type = "memory"; + reg = <0x0 0x0 0x0 0x80000000>; + }; + + adc-keys { + compatible = "adc-keys"; + io-channels = <&saradc 0>; + io-channel-names = "buttons"; + keyup-threshold-microvolt = <1710000>; + + button-function { + label = "Function"; + linux,code = <KEY_FN>; + press-threshold-microvolt = <10000>; + }; + }; + + emmc_pwrseq: emmc-pwrseq { + compatible = "mmc-pwrseq-emmc"; + reset-gpios = <&gpio BOOT_9 GPIO_ACTIVE_LOW>; + }; + + gpio_fan: gpio-fan { + compatible = "gpio-fan"; + gpios = <&gpio GPIODV_14 GPIO_ACTIVE_HIGH + &gpio GPIODV_15 GPIO_ACTIVE_HIGH>; + /* Dummy RPM values since fan is optional */ + gpio-fan,speed-map = <0 0 + 1 1 + 2 2 + 3 3>; + cooling-min-level = <0>; + cooling-max-level = <3>; + #cooling-cells = <2>; + }; + + gpio-keys-polled { + compatible = "gpio-keys-polled"; + #address-cells = <1>; + #size-cells = <0>; + poll-interval = <100>; + + button@0 { + label = "power"; + linux,code = <KEY_POWER>; + gpios = <&gpio_ao GPIOAO_2 GPIO_ACTIVE_LOW>; + }; + }; + + hdmi-connector { + compatible = "hdmi-connector"; + type = "a"; + + port { + hdmi_connector_in: endpoint { + remote-endpoint = <&hdmi_tx_tmds_out>; + }; + }; + }; + + pwmleds { + compatible = "pwm-leds"; + + power { + label = "vim:red:power"; + pwms = <&pwm_AO_ab 1 7812500 0>; + max-brightness = <255>; + linux,default-trigger = "default-on"; + }; + }; + + sdio_pwrseq: sdio-pwrseq { + compatible = "mmc-pwrseq-simple"; + reset-gpios = <&gpio GPIOX_6 GPIO_ACTIVE_LOW>; + clocks = <&wifi32k>; + clock-names = "ext_clock"; + }; + + thermal-zones { + cpu-thermal { + polling-delay-passive = <250>; /* milliseconds */ + polling-delay = <1000>; /* milliseconds */ + + thermal-sensors = <&scpi_sensors 0>; + + trips { + cpu_alert0: cpu-alert0 { + temperature = <70000>; /* millicelsius */ + hysteresis = <2000>; /* millicelsius */ + type = "active"; + }; + + cpu_alert1: cpu-alert1 { + temperature = <80000>; /* millicelsius */ + hysteresis = <2000>; /* millicelsius */ + type = "passive"; + }; + }; + + cooling-maps { + map0 { + trip = <&cpu_alert0>; + cooling-device = <&gpio_fan THERMAL_NO_LIMIT 1>; + }; + + map1 { + trip = <&cpu_alert1>; + cooling-device = <&gpio_fan 2 THERMAL_NO_LIMIT>; + }; + + map2 { + trip = <&cpu_alert1>; + cooling-device = + <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + + map3 { + trip = <&cpu_alert1>; + cooling-device = + <&cpu4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; + }; + }; + + vcc_3v3: regulator-vcc_3v3 { + compatible = "regulator-fixed"; + regulator-name = "VCC_3V3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + + vddio_ao18: regulator-vddio_ao18 { + compatible = "regulator-fixed"; + regulator-name = "VDDIO_AO18"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + vddio_boot: regulator-vddio_boot { + compatible = "regulator-fixed"; + regulator-name = "VDDIO_BOOT"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + vddao_3v3: regulator-vddao_3v3 { + compatible = "regulator-fixed"; + regulator-name = "VDDAO_3V3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + + wifi32k: wifi32k { + compatible = "pwm-clock"; + #clock-cells = <0>; + clock-frequency = <32768>; + pwms = <&pwm_ef 0 30518 0>; /* PWM_E at 32.768KHz */ + }; +}; + +&cec_AO { + status = "okay"; + pinctrl-0 = <&ao_cec_pins>; + pinctrl-names = "default"; + hdmi-phandle = <&hdmi_tx>; +}; + +&cpu0 { + cooling-min-level = <0>; + cooling-max-level = <6>; + #cooling-cells = <2>; +}; + +&cpu4 { + cooling-min-level = <0>; + cooling-max-level = <4>; + #cooling-cells = <2>; +}; + +ðmac { + pinctrl-0 = <ð_pins>; + pinctrl-names = "default"; + + /* Select external PHY by default */ + phy-handle = <&external_phy>; + + amlogic,tx-delay-ns = <2>; + + /* External PHY reset is shared with internal PHY Led signals */ + snps,reset-gpio = <&gpio GPIOZ_14 0>; + snps,reset-delays-us = <0 10000 1000000>; + snps,reset-active-low; + + /* External PHY is in RGMII */ + phy-mode = "rgmii"; + + status = "okay"; +}; + +&external_mdio { + external_phy: ethernet-phy@0 { + /* Realtek RTL8211F (0x001cc916) */ + reg = <0>; + }; +}; + +&hdmi_tx { + status = "okay"; + pinctrl-0 = <&hdmi_hpd_pins>, <&hdmi_i2c_pins>; + pinctrl-names = "default"; +}; + +&hdmi_tx_tmds_port { + hdmi_tx_tmds_out: endpoint { + remote-endpoint = <&hdmi_connector_in>; + }; +}; + +&i2c_A { + status = "okay"; + pinctrl-0 = <&i2c_a_pins>; + pinctrl-names = "default"; +}; + +&i2c_B { + status = "okay"; + pinctrl-0 = <&i2c_b_pins>; + pinctrl-names = "default"; + + rtc: rtc@51 { + /* has to be enabled manually when a battery is connected: */ + status = "disabled"; + compatible = "haoyu,hym8563"; + reg = <0x51>; + #clock-cells = <0>; + clock-frequency = <32768>; + clock-output-names = "xin32k"; + }; +}; + +&ir { + status = "okay"; + pinctrl-0 = <&remote_input_ao_pins>; + pinctrl-names = "default"; + linux,rc-map-name = "rc-geekbox"; +}; + +&pwm_AO_ab { + status = "okay"; + pinctrl-0 = <&pwm_ao_a_3_pins>, <&pwm_ao_b_pins>; + pinctrl-names = "default"; + clocks = <&clkc CLKID_FCLK_DIV4>; + clock-names = "clkin0"; +}; + +&pwm_ef { + status = "okay"; + pinctrl-0 = <&pwm_e_pins>, <&pwm_f_clk_pins>; + pinctrl-names = "default"; + clocks = <&clkc CLKID_FCLK_DIV4>; + clock-names = "clkin0"; +}; + +&sd_emmc_a { + status = "okay"; + pinctrl-0 = <&sdio_pins>; + pinctrl-names = "default"; + #address-cells = <1>; + #size-cells = <0>; + + bus-width = <4>; + max-frequency = <100000000>; + + non-removable; + disable-wp; + + mmc-pwrseq = <&sdio_pwrseq>; + + vmmc-supply = <&vddao_3v3>; + vqmmc-supply = <&vddio_boot>; + + brcmf: wifi@1 { + reg = <1>; + compatible = "brcm,bcm4329-fmac"; + }; +}; + +/* SD card */ +&sd_emmc_b { + status = "okay"; + pinctrl-0 = <&sdcard_pins>; + pinctrl-names = "default"; + + bus-width = <4>; + cap-sd-highspeed; + max-frequency = <100000000>; + disable-wp; + + cd-gpios = <&gpio CARD_6 GPIO_ACTIVE_HIGH>; + cd-inverted; + + vmmc-supply = <&vddao_3v3>; + vqmmc-supply = <&vddio_boot>; +}; + +/* eMMC */ +&sd_emmc_c { + status = "okay"; + pinctrl-0 = <&emmc_pins>, <&emmc_ds_pins>; + pinctrl-names = "default"; + + bus-width = <8>; + cap-sd-highspeed; + cap-mmc-highspeed; + max-frequency = <200000000>; + non-removable; + disable-wp; + mmc-ddr-1_8v; + mmc-hs200-1_8v; + mmc-hs400-1_8v; + + mmc-pwrseq = <&emmc_pwrseq>; + vmmc-supply = <&vcc_3v3>; + vqmmc-supply = <&vddio_boot>; +}; + +/* + * EMMC_DS pin is shared between SPI NOR CS and eMMC Data Strobe + * Remove emmc_ds_pins from sd_emmc_c pinctrl-0 then spifc can be enabled + */ +&spifc { + status = "disabled"; + pinctrl-0 = <&nor_pins>; + pinctrl-names = "default"; + + w25q32: spi-flash@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "winbond,w25q16", "jedec,spi-nor"; + reg = <0>; + spi-max-frequency = <3000000>; + }; +}; + +/* This one is connected to the Bluetooth module */ +&uart_A { + status = "okay"; + pinctrl-0 = <&uart_a_pins>; + pinctrl-names = "default"; +}; + +/* This is brought out on the Linux_RX (18) and Linux_TX (19) pins: */ +&uart_AO { + status = "okay"; + pinctrl-0 = <&uart_ao_a_pins>; + pinctrl-names = "default"; +}; + +/* This is brought out on the UART_RX_AO_B (15) and UART_TX_AO_B (16) pins: */ +&uart_AO_B { + status = "okay"; + pinctrl-0 = <&uart_ao_b_pins>; + pinctrl-names = "default"; +}; + +&saradc { + status = "okay"; + vref-supply = <&vddio_ao18>; +}; diff --git a/arch/arm64/boot/dts/amlogic/meson-gxm-nexbox-a1.dts b/arch/arm64/boot/dts/amlogic/meson-gxm-nexbox-a1.dts index 22c697732f66..e7a228f6cc7e 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gxm-nexbox-a1.dts +++ b/arch/arm64/boot/dts/amlogic/meson-gxm-nexbox-a1.dts @@ -193,7 +193,7 @@ /* eMMC */ &sd_emmc_c { status = "okay"; - pinctrl-0 = <&emmc_pins>; + pinctrl-0 = <&emmc_pins>, <&emmc_ds_pins>; pinctrl-1 = <&emmc_clk_gate_pins>; pinctrl-names = "default", "clk-gate"; diff --git a/arch/arm64/boot/dts/amlogic/meson-gxm-q200.dts b/arch/arm64/boot/dts/amlogic/meson-gxm-q200.dts index b65776b01911..66c6da7e112c 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gxm-q200.dts +++ b/arch/arm64/boot/dts/amlogic/meson-gxm-q200.dts @@ -110,6 +110,8 @@ compatible = "ethernet-phy-id001c.c916", "ethernet-phy-ieee802.3-c22"; reg = <0>; max-speed = <1000>; + interrupt-parent = <&gpio_intc>; + interrupts = <29 IRQ_TYPE_LEVEL_LOW>; }; }; diff --git a/arch/arm64/boot/dts/amlogic/meson-gxm-rbox-pro.dts b/arch/arm64/boot/dts/amlogic/meson-gxm-rbox-pro.dts index 470f72bb863c..a5e9b955d5ed 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gxm-rbox-pro.dts +++ b/arch/arm64/boot/dts/amlogic/meson-gxm-rbox-pro.dts @@ -216,7 +216,7 @@ /* eMMC */ &sd_emmc_c { status = "okay"; - pinctrl-0 = <&emmc_pins>; + pinctrl-0 = <&emmc_pins>, <&emmc_ds_pins>; pinctrl-names = "default"; bus-width = <8>; diff --git a/arch/arm64/boot/dts/amlogic/meson-gxm-vega-s96.dts b/arch/arm64/boot/dts/amlogic/meson-gxm-vega-s96.dts new file mode 100644 index 000000000000..dc37eecb9514 --- /dev/null +++ b/arch/arm64/boot/dts/amlogic/meson-gxm-vega-s96.dts @@ -0,0 +1,38 @@ +/* + * Copyright (c) 2017 BayLibre, SAS. + * Author: Neil Armstrong <narmstrong@baylibre.com> + * Copyright (c) 2017 Oleg <balbes-150@yandex.ru> + * + * SPDX-License-Identifier: (GPL-2.0+ OR MIT) + */ + +/dts-v1/; + +#include "meson-gxm.dtsi" +#include "meson-gx-p23x-q20x.dtsi" + +/ { + compatible = "tronsmart,vega-s96", "amlogic,s912", "amlogic,meson-gxm"; + model = "Tronsmart Vega S96"; + +}; + +ðmac { + pinctrl-0 = <ð_pins>; + pinctrl-names = "default"; + + /* Select external PHY by default */ + phy-handle = <&external_phy>; + + amlogic,tx-delay-ns = <2>; + + /* External PHY is in RGMII */ + phy-mode = "rgmii"; +}; + +&external_mdio { + external_phy: ethernet-phy@0 { + /* Realtek RTL8211F (0x001cc916) */ + reg = <0>; + }; +}; diff --git a/arch/arm64/boot/dts/apm/apm-shadowcat.dtsi b/arch/arm64/boot/dts/apm/apm-shadowcat.dtsi index c9ffffb96e43..d8ecd1661461 100644 --- a/arch/arm64/boot/dts/apm/apm-shadowcat.dtsi +++ b/arch/arm64/boot/dts/apm/apm-shadowcat.dtsi @@ -19,7 +19,7 @@ #address-cells = <2>; #size-cells = <0>; - cpu@000 { + cpu@0 { device_type = "cpu"; compatible = "apm,strega", "arm,armv8"; reg = <0x0 0x000>; @@ -29,7 +29,7 @@ #clock-cells = <1>; clocks = <&pmd0clk 0>; }; - cpu@001 { + cpu@1 { device_type = "cpu"; compatible = "apm,strega", "arm,armv8"; reg = <0x0 0x001>; @@ -125,7 +125,7 @@ <0x0 0x780a0000 0x0 0x20000>, /* GIC CPU */ <0x0 0x780c0000 0x0 0x10000>, /* GIC VCPU Control */ <0x0 0x780e0000 0x0 0x20000>; /* GIC VCPU */ - v2m0: v2m@00000 { + v2m0: v2m@0 { compatible = "arm,gic-v2m-frame"; msi-controller; reg = <0x0 0x0 0x0 0x1000>; diff --git a/arch/arm64/boot/dts/apm/apm-storm.dtsi b/arch/arm64/boot/dts/apm/apm-storm.dtsi index c09a36fed917..00e82b8e9a19 100644 --- a/arch/arm64/boot/dts/apm/apm-storm.dtsi +++ b/arch/arm64/boot/dts/apm/apm-storm.dtsi @@ -19,7 +19,7 @@ #address-cells = <2>; #size-cells = <0>; - cpu@000 { + cpu@0 { device_type = "cpu"; compatible = "apm,potenza", "arm,armv8"; reg = <0x0 0x000>; @@ -27,7 +27,7 @@ cpu-release-addr = <0x1 0x0000fff8>; next-level-cache = <&xgene_L2_0>; }; - cpu@001 { + cpu@1 { device_type = "cpu"; compatible = "apm,potenza", "arm,armv8"; reg = <0x0 0x001>; diff --git a/arch/arm64/boot/dts/arm/Makefile b/arch/arm64/boot/dts/arm/Makefile index 4256bae99925..5b45144b371a 100644 --- a/arch/arm64/boot/dts/arm/Makefile +++ b/arch/arm64/boot/dts/arm/Makefile @@ -1,5 +1,7 @@ # SPDX-License-Identifier: GPL-2.0 -dtb-$(CONFIG_ARCH_VEXPRESS) += foundation-v8.dtb foundation-v8-gicv3.dtb +dtb-$(CONFIG_ARCH_VEXPRESS) += \ + foundation-v8.dtb foundation-v8-psci.dtb \ + foundation-v8-gicv3.dtb foundation-v8-gicv3-psci.dtb dtb-$(CONFIG_ARCH_VEXPRESS) += juno.dtb juno-r1.dtb juno-r2.dtb dtb-$(CONFIG_ARCH_VEXPRESS) += rtsm_ve-aemv8a.dtb dtb-$(CONFIG_ARCH_VEXPRESS) += vexpress-v2f-1xv7-ca53x2.dtb diff --git a/arch/arm64/boot/dts/arm/foundation-v8-gicv2.dtsi b/arch/arm64/boot/dts/arm/foundation-v8-gicv2.dtsi new file mode 100644 index 000000000000..851abf34fc80 --- /dev/null +++ b/arch/arm64/boot/dts/arm/foundation-v8-gicv2.dtsi @@ -0,0 +1,19 @@ +/* + * ARM Ltd. + * + * ARMv8 Foundation model DTS (GICv2 configuration) + */ + +/ { + gic: interrupt-controller@2c001000 { + compatible = "arm,cortex-a15-gic", "arm,cortex-a9-gic"; + #interrupt-cells = <3>; + #address-cells = <2>; + interrupt-controller; + reg = <0x0 0x2c001000 0 0x1000>, + <0x0 0x2c002000 0 0x2000>, + <0x0 0x2c004000 0 0x2000>, + <0x0 0x2c006000 0 0x2000>; + interrupts = <1 9 0xf04>; + }; +}; diff --git a/arch/arm64/boot/dts/arm/foundation-v8-gicv3-psci.dts b/arch/arm64/boot/dts/arm/foundation-v8-gicv3-psci.dts new file mode 100644 index 000000000000..e096e670bec3 --- /dev/null +++ b/arch/arm64/boot/dts/arm/foundation-v8-gicv3-psci.dts @@ -0,0 +1,9 @@ +/* + * ARM Ltd. + * + * ARMv8 Foundation model DTS (GICv3+PSCI configuration) + */ + +#include "foundation-v8.dtsi" +#include "foundation-v8-gicv3.dtsi" +#include "foundation-v8-psci.dtsi" diff --git a/arch/arm64/boot/dts/arm/foundation-v8-gicv3.dts b/arch/arm64/boot/dts/arm/foundation-v8-gicv3.dts index 4825cdbdcf46..c87380e87f59 100644 --- a/arch/arm64/boot/dts/arm/foundation-v8-gicv3.dts +++ b/arch/arm64/boot/dts/arm/foundation-v8-gicv3.dts @@ -6,26 +6,5 @@ */ #include "foundation-v8.dtsi" - -/ { - gic: interrupt-controller@2f000000 { - compatible = "arm,gic-v3"; - #interrupt-cells = <3>; - #address-cells = <2>; - #size-cells = <2>; - ranges; - interrupt-controller; - reg = <0x0 0x2f000000 0x0 0x10000>, - <0x0 0x2f100000 0x0 0x200000>, - <0x0 0x2c000000 0x0 0x2000>, - <0x0 0x2c010000 0x0 0x2000>, - <0x0 0x2c02f000 0x0 0x2000>; - interrupts = <1 9 4>; - - its: its@2f020000 { - compatible = "arm,gic-v3-its"; - msi-controller; - reg = <0x0 0x2f020000 0x0 0x20000>; - }; - }; -}; +#include "foundation-v8-gicv3.dtsi" +#include "foundation-v8-spin-table.dtsi" diff --git a/arch/arm64/boot/dts/arm/foundation-v8-gicv3.dtsi b/arch/arm64/boot/dts/arm/foundation-v8-gicv3.dtsi new file mode 100644 index 000000000000..91fc5c60d88b --- /dev/null +++ b/arch/arm64/boot/dts/arm/foundation-v8-gicv3.dtsi @@ -0,0 +1,28 @@ +/* + * ARM Ltd. + * + * ARMv8 Foundation model DTS (GICv3 configuration) + */ + +/ { + gic: interrupt-controller@2f000000 { + compatible = "arm,gic-v3"; + #interrupt-cells = <3>; + #address-cells = <2>; + #size-cells = <2>; + ranges; + interrupt-controller; + reg = <0x0 0x2f000000 0x0 0x10000>, + <0x0 0x2f100000 0x0 0x200000>, + <0x0 0x2c000000 0x0 0x2000>, + <0x0 0x2c010000 0x0 0x2000>, + <0x0 0x2c02f000 0x0 0x2000>; + interrupts = <1 9 4>; + + its: its@2f020000 { + compatible = "arm,gic-v3-its"; + msi-controller; + reg = <0x0 0x2f020000 0x0 0x20000>; + }; + }; +}; diff --git a/arch/arm64/boot/dts/arm/foundation-v8-psci.dts b/arch/arm64/boot/dts/arm/foundation-v8-psci.dts new file mode 100644 index 000000000000..723f23c7cd31 --- /dev/null +++ b/arch/arm64/boot/dts/arm/foundation-v8-psci.dts @@ -0,0 +1,9 @@ +/* + * ARM Ltd. + * + * ARMv8 Foundation model DTS (GICv2+PSCI configuration) + */ + +#include "foundation-v8.dtsi" +#include "foundation-v8-gicv2.dtsi" +#include "foundation-v8-psci.dtsi" diff --git a/arch/arm64/boot/dts/arm/foundation-v8-psci.dtsi b/arch/arm64/boot/dts/arm/foundation-v8-psci.dtsi new file mode 100644 index 000000000000..16cdf395728b --- /dev/null +++ b/arch/arm64/boot/dts/arm/foundation-v8-psci.dtsi @@ -0,0 +1,28 @@ +/* + * ARM Ltd. + * + * ARMv8 Foundation model DTS (PSCI configuration) + */ + +/ { + psci { + compatible = "arm,psci-1.0"; + method = "smc"; + }; +}; + +&cpu0 { + enable-method = "psci"; +}; + +&cpu1 { + enable-method = "psci"; +}; + +&cpu2 { + enable-method = "psci"; +}; + +&cpu3 { + enable-method = "psci"; +}; diff --git a/arch/arm64/boot/dts/arm/foundation-v8-spin-table.dtsi b/arch/arm64/boot/dts/arm/foundation-v8-spin-table.dtsi new file mode 100644 index 000000000000..4d4186ba0e8c --- /dev/null +++ b/arch/arm64/boot/dts/arm/foundation-v8-spin-table.dtsi @@ -0,0 +1,25 @@ +/* + * ARM Ltd. + * + * ARMv8 Foundation model DTS (spin table configuration) + */ + +&cpu0 { + enable-method = "spin-table"; + cpu-release-addr = <0x0 0x8000fff8>; +}; + +&cpu1 { + enable-method = "spin-table"; + cpu-release-addr = <0x0 0x8000fff8>; +}; + +&cpu2 { + enable-method = "spin-table"; + cpu-release-addr = <0x0 0x8000fff8>; +}; + +&cpu3 { + enable-method = "spin-table"; + cpu-release-addr = <0x0 0x8000fff8>; +}; diff --git a/arch/arm64/boot/dts/arm/foundation-v8.dts b/arch/arm64/boot/dts/arm/foundation-v8.dts index 8a9136f4ab74..b17347d75ec6 100644 --- a/arch/arm64/boot/dts/arm/foundation-v8.dts +++ b/arch/arm64/boot/dts/arm/foundation-v8.dts @@ -6,17 +6,5 @@ */ #include "foundation-v8.dtsi" - -/ { - gic: interrupt-controller@2c001000 { - compatible = "arm,cortex-a15-gic", "arm,cortex-a9-gic"; - #interrupt-cells = <3>; - #address-cells = <2>; - interrupt-controller; - reg = <0x0 0x2c001000 0 0x1000>, - <0x0 0x2c002000 0 0x2000>, - <0x0 0x2c004000 0 0x2000>, - <0x0 0x2c006000 0 0x2000>; - interrupts = <1 9 0xf04>; - }; -}; +#include "foundation-v8-gicv2.dtsi" +#include "foundation-v8-spin-table.dtsi" diff --git a/arch/arm64/boot/dts/arm/foundation-v8.dtsi b/arch/arm64/boot/dts/arm/foundation-v8.dtsi index f0b67e439f58..e080277d27ae 100644 --- a/arch/arm64/boot/dts/arm/foundation-v8.dtsi +++ b/arch/arm64/boot/dts/arm/foundation-v8.dtsi @@ -29,36 +29,28 @@ #address-cells = <2>; #size-cells = <0>; - cpu@0 { + cpu0: cpu@0 { device_type = "cpu"; compatible = "arm,armv8"; reg = <0x0 0x0>; - enable-method = "spin-table"; - cpu-release-addr = <0x0 0x8000fff8>; next-level-cache = <&L2_0>; }; - cpu@1 { + cpu1: cpu@1 { device_type = "cpu"; compatible = "arm,armv8"; reg = <0x0 0x1>; - enable-method = "spin-table"; - cpu-release-addr = <0x0 0x8000fff8>; next-level-cache = <&L2_0>; }; - cpu@2 { + cpu2: cpu@2 { device_type = "cpu"; compatible = "arm,armv8"; reg = <0x0 0x2>; - enable-method = "spin-table"; - cpu-release-addr = <0x0 0x8000fff8>; next-level-cache = <&L2_0>; }; - cpu@3 { + cpu3: cpu@3 { device_type = "cpu"; compatible = "arm,armv8"; reg = <0x0 0x3>; - enable-method = "spin-table"; - cpu-release-addr = <0x0 0x8000fff8>; next-level-cache = <&L2_0>; }; @@ -98,7 +90,7 @@ timeout-sec = <30>; }; - smb@08000000 { + smb@8000000 { compatible = "arm,vexpress,v2m-p1", "simple-bus"; arm,v2m-memory-map = "rs1"; #address-cells = <2>; /* SMB chipselect number and offset */ @@ -190,12 +182,12 @@ #size-cells = <1>; ranges = <0 3 0 0x200000>; - v2m_sysreg: sysreg@010000 { + v2m_sysreg: sysreg@10000 { compatible = "arm,vexpress-sysreg"; reg = <0x010000 0x1000>; }; - v2m_serial0: uart@090000 { + v2m_serial0: uart@90000 { compatible = "arm,pl011", "arm,primecell"; reg = <0x090000 0x1000>; interrupts = <5>; @@ -203,7 +195,7 @@ clock-names = "uartclk", "apb_pclk"; }; - v2m_serial1: uart@0a0000 { + v2m_serial1: uart@a0000 { compatible = "arm,pl011", "arm,primecell"; reg = <0x0a0000 0x1000>; interrupts = <6>; @@ -211,7 +203,7 @@ clock-names = "uartclk", "apb_pclk"; }; - v2m_serial2: uart@0b0000 { + v2m_serial2: uart@b0000 { compatible = "arm,pl011", "arm,primecell"; reg = <0x0b0000 0x1000>; interrupts = <7>; @@ -219,7 +211,7 @@ clock-names = "uartclk", "apb_pclk"; }; - v2m_serial3: uart@0c0000 { + v2m_serial3: uart@c0000 { compatible = "arm,pl011", "arm,primecell"; reg = <0x0c0000 0x1000>; interrupts = <8>; @@ -227,7 +219,7 @@ clock-names = "uartclk", "apb_pclk"; }; - virtio-block@0130000 { + virtio-block@130000 { compatible = "virtio,mmio"; reg = <0x130000 0x200>; interrupts = <42>; diff --git a/arch/arm64/boot/dts/arm/rtsm_ve-aemv8a.dts b/arch/arm64/boot/dts/arm/rtsm_ve-aemv8a.dts index 7810632d3438..06c8117e812a 100644 --- a/arch/arm64/boot/dts/arm/rtsm_ve-aemv8a.dts +++ b/arch/arm64/boot/dts/arm/rtsm_ve-aemv8a.dts @@ -105,7 +105,7 @@ <0 63 4>; }; - smb@08000000 { + smb@8000000 { compatible = "simple-bus"; #address-cells = <2>; diff --git a/arch/arm64/boot/dts/arm/rtsm_ve-motherboard.dtsi b/arch/arm64/boot/dts/arm/rtsm_ve-motherboard.dtsi index e18fe006cc2a..1134e5d8df18 100644 --- a/arch/arm64/boot/dts/arm/rtsm_ve-motherboard.dtsi +++ b/arch/arm64/boot/dts/arm/rtsm_ve-motherboard.dtsi @@ -61,14 +61,14 @@ #size-cells = <1>; ranges = <0 3 0 0x200000>; - v2m_sysreg: sysreg@010000 { + v2m_sysreg: sysreg@10000 { compatible = "arm,vexpress-sysreg"; reg = <0x010000 0x1000>; gpio-controller; #gpio-cells = <2>; }; - v2m_sysctl: sysctl@020000 { + v2m_sysctl: sysctl@20000 { compatible = "arm,sp810", "arm,primecell"; reg = <0x020000 0x1000>; clocks = <&v2m_refclk32khz>, <&v2m_refclk1mhz>, <&v2m_clk24mhz>; @@ -79,7 +79,7 @@ assigned-clock-parents = <&v2m_refclk1mhz>, <&v2m_refclk1mhz>, <&v2m_refclk1mhz>, <&v2m_refclk1mhz>; }; - aaci@040000 { + aaci@40000 { compatible = "arm,pl041", "arm,primecell"; reg = <0x040000 0x1000>; interrupts = <11>; @@ -87,7 +87,7 @@ clock-names = "apb_pclk"; }; - mmci@050000 { + mmci@50000 { compatible = "arm,pl180", "arm,primecell"; reg = <0x050000 0x1000>; interrupts = <9 10>; @@ -99,7 +99,7 @@ clock-names = "mclk", "apb_pclk"; }; - kmi@060000 { + kmi@60000 { compatible = "arm,pl050", "arm,primecell"; reg = <0x060000 0x1000>; interrupts = <12>; @@ -107,7 +107,7 @@ clock-names = "KMIREFCLK", "apb_pclk"; }; - kmi@070000 { + kmi@70000 { compatible = "arm,pl050", "arm,primecell"; reg = <0x070000 0x1000>; interrupts = <13>; @@ -115,7 +115,7 @@ clock-names = "KMIREFCLK", "apb_pclk"; }; - v2m_serial0: uart@090000 { + v2m_serial0: uart@90000 { compatible = "arm,pl011", "arm,primecell"; reg = <0x090000 0x1000>; interrupts = <5>; @@ -123,7 +123,7 @@ clock-names = "uartclk", "apb_pclk"; }; - v2m_serial1: uart@0a0000 { + v2m_serial1: uart@a0000 { compatible = "arm,pl011", "arm,primecell"; reg = <0x0a0000 0x1000>; interrupts = <6>; @@ -131,7 +131,7 @@ clock-names = "uartclk", "apb_pclk"; }; - v2m_serial2: uart@0b0000 { + v2m_serial2: uart@b0000 { compatible = "arm,pl011", "arm,primecell"; reg = <0x0b0000 0x1000>; interrupts = <7>; @@ -139,7 +139,7 @@ clock-names = "uartclk", "apb_pclk"; }; - v2m_serial3: uart@0c0000 { + v2m_serial3: uart@c0000 { compatible = "arm,pl011", "arm,primecell"; reg = <0x0c0000 0x1000>; interrupts = <8>; @@ -147,7 +147,7 @@ clock-names = "uartclk", "apb_pclk"; }; - wdt@0f0000 { + wdt@f0000 { compatible = "arm,sp805", "arm,primecell"; reg = <0x0f0000 0x1000>; interrupts = <0>; @@ -220,7 +220,7 @@ }; }; - virtio-block@0130000 { + virtio-block@130000 { compatible = "virtio,mmio"; reg = <0x130000 0x200>; interrupts = <42>; diff --git a/arch/arm64/boot/dts/arm/vexpress-v2f-1xv7-ca53x2.dts b/arch/arm64/boot/dts/arm/vexpress-v2f-1xv7-ca53x2.dts index 2cb604957808..1c9eadc2d71e 100644 --- a/arch/arm64/boot/dts/arm/vexpress-v2f-1xv7-ca53x2.dts +++ b/arch/arm64/boot/dts/arm/vexpress-v2f-1xv7-ca53x2.dts @@ -129,7 +129,7 @@ }; }; - smb@08000000 { + smb@8000000 { compatible = "simple-bus"; #address-cells = <2>; diff --git a/arch/arm64/boot/dts/broadcom/northstar2/ns2-xmc.dts b/arch/arm64/boot/dts/broadcom/northstar2/ns2-xmc.dts index ab4ae1a32fab..f00c21e0767e 100644 --- a/arch/arm64/boot/dts/broadcom/northstar2/ns2-xmc.dts +++ b/arch/arm64/boot/dts/broadcom/northstar2/ns2-xmc.dts @@ -114,7 +114,7 @@ reg = <0x04000000 0x06400000>; /* 100MB */ }; - partition@0a400000{ + partition@a400000{ label = "ncustfs"; reg = <0x0a400000 0x35c00000>; /* 860MB */ }; diff --git a/arch/arm64/boot/dts/broadcom/northstar2/ns2.dtsi b/arch/arm64/boot/dts/broadcom/northstar2/ns2.dtsi index 35c8457e3d1f..4a2a6af8e752 100644 --- a/arch/arm64/boot/dts/broadcom/northstar2/ns2.dtsi +++ b/arch/arm64/boot/dts/broadcom/northstar2/ns2.dtsi @@ -77,7 +77,7 @@ next-level-cache = <&CLUSTER0_L2>; }; - CLUSTER0_L2: l2-cache@000 { + CLUSTER0_L2: l2-cache@0 { compatible = "cache"; }; }; @@ -367,7 +367,7 @@ #size-cells = <1>; ranges = <0 0x652e0000 0x80000>; - v2m0: v2m@00000 { + v2m0: v2m@0 { compatible = "arm,gic-v2m-frame"; interrupt-parent = <&gic>; msi-controller; diff --git a/arch/arm64/boot/dts/broadcom/stingray/stingray-clock.dtsi b/arch/arm64/boot/dts/broadcom/stingray/stingray-clock.dtsi index cbc43376e25e..3a4d4524b5ed 100644 --- a/arch/arm64/boot/dts/broadcom/stingray/stingray-clock.dtsi +++ b/arch/arm64/boot/dts/broadcom/stingray/stingray-clock.dtsi @@ -46,7 +46,7 @@ clock-mult = <1>; }; - genpll0: genpll0@0001d104 { + genpll0: genpll0@1d104 { #clock-cells = <1>; compatible = "brcm,sr-genpll0"; reg = <0x0001d104 0x32>, @@ -58,7 +58,7 @@ "clk_paxc_axi"; }; - genpll3: genpll3@0001d1e0 { + genpll3: genpll3@1d1e0 { #clock-cells = <1>; compatible = "brcm,sr-genpll3"; reg = <0x0001d1e0 0x32>, @@ -68,7 +68,7 @@ "clk_sdio"; }; - genpll4: genpll4@0001d214 { + genpll4: genpll4@1d214 { #clock-cells = <1>; compatible = "brcm,sr-genpll4"; reg = <0x0001d214 0x32>, @@ -80,7 +80,7 @@ "clk_bridge_fscpu"; }; - genpll5: genpll5@0001d248 { + genpll5: genpll5@1d248 { #clock-cells = <1>; compatible = "brcm,sr-genpll5"; reg = <0x0001d248 0x32>, @@ -90,7 +90,7 @@ "crypto_ae_clk", "raid_ae_clk"; }; - lcpll0: lcpll0@0001d0c4 { + lcpll0: lcpll0@1d0c4 { #clock-cells = <1>; compatible = "brcm,sr-lcpll0"; reg = <0x0001d0c4 0x3c>, @@ -101,7 +101,7 @@ "clk_sata_500"; }; - lcpll1: lcpll1@0001d138 { + lcpll1: lcpll1@1d138 { #clock-cells = <1>; compatible = "brcm,sr-lcpll1"; reg = <0x0001d138 0x3c>, diff --git a/arch/arm64/boot/dts/broadcom/stingray/stingray-fs4.dtsi b/arch/arm64/boot/dts/broadcom/stingray/stingray-fs4.dtsi index 8bf1dc6b46ca..9666969c8c88 100644 --- a/arch/arm64/boot/dts/broadcom/stingray/stingray-fs4.dtsi +++ b/arch/arm64/boot/dts/broadcom/stingray/stingray-fs4.dtsi @@ -36,7 +36,7 @@ #size-cells = <1>; ranges = <0x0 0x0 0x67000000 0x00800000>; - crypto_mbox: crypto_mbox@00000000 { + crypto_mbox: crypto_mbox@0 { compatible = "brcm,iproc-flexrm-mbox"; reg = <0x00000000 0x200000>; msi-parent = <&gic_its 0x4100>; @@ -44,7 +44,7 @@ dma-coherent; }; - raid_mbox: raid_mbox@00400000 { + raid_mbox: raid_mbox@400000 { compatible = "brcm,iproc-flexrm-mbox"; reg = <0x00400000 0x200000>; dma-coherent; diff --git a/arch/arm64/boot/dts/broadcom/stingray/stingray-pinctrl.dtsi b/arch/arm64/boot/dts/broadcom/stingray/stingray-pinctrl.dtsi index 15214d05fec1..8a3a770e8f2c 100644 --- a/arch/arm64/boot/dts/broadcom/stingray/stingray-pinctrl.dtsi +++ b/arch/arm64/boot/dts/broadcom/stingray/stingray-pinctrl.dtsi @@ -32,7 +32,7 @@ #include <dt-bindings/pinctrl/brcm,pinctrl-stingray.h> - pinconf: pinconf@00140000 { + pinconf: pinconf@140000 { compatible = "pinconf-single"; reg = <0x00140000 0x250>; pinctrl-single,register-width = <32>; @@ -40,7 +40,7 @@ /* pinconf functions */ }; - pinmux: pinmux@0014029c { + pinmux: pinmux@14029c { compatible = "pinctrl-single"; reg = <0x0014029c 0x250>; #address-cells = <1>; diff --git a/arch/arm64/boot/dts/broadcom/stingray/stingray-sata.dtsi b/arch/arm64/boot/dts/broadcom/stingray/stingray-sata.dtsi index a774709388df..4b5465da81d8 100644 --- a/arch/arm64/boot/dts/broadcom/stingray/stingray-sata.dtsi +++ b/arch/arm64/boot/dts/broadcom/stingray/stingray-sata.dtsi @@ -36,7 +36,7 @@ #size-cells = <1>; ranges = <0x0 0x0 0x67d00000 0x00800000>; - sata0: ahci@00210000 { + sata0: ahci@210000 { compatible = "brcm,iproc-ahci", "generic-ahci"; reg = <0x00210000 0x1000>; reg-names = "ahci"; @@ -52,7 +52,7 @@ }; }; - sata_phy0: sata_phy@00212100 { + sata_phy0: sata_phy@212100 { compatible = "brcm,iproc-sr-sata-phy"; reg = <0x00212100 0x1000>; reg-names = "phy"; @@ -66,7 +66,7 @@ }; }; - sata1: ahci@00310000 { + sata1: ahci@310000 { compatible = "brcm,iproc-ahci", "generic-ahci"; reg = <0x00310000 0x1000>; reg-names = "ahci"; @@ -82,7 +82,7 @@ }; }; - sata_phy1: sata_phy@00312100 { + sata_phy1: sata_phy@312100 { compatible = "brcm,iproc-sr-sata-phy"; reg = <0x00312100 0x1000>; reg-names = "phy"; @@ -96,7 +96,7 @@ }; }; - sata2: ahci@00120000 { + sata2: ahci@120000 { compatible = "brcm,iproc-ahci", "generic-ahci"; reg = <0x00120000 0x1000>; reg-names = "ahci"; @@ -112,7 +112,7 @@ }; }; - sata_phy2: sata_phy@00122100 { + sata_phy2: sata_phy@122100 { compatible = "brcm,iproc-sr-sata-phy"; reg = <0x00122100 0x1000>; reg-names = "phy"; @@ -126,7 +126,7 @@ }; }; - sata3: ahci@00130000 { + sata3: ahci@130000 { compatible = "brcm,iproc-ahci", "generic-ahci"; reg = <0x00130000 0x1000>; reg-names = "ahci"; @@ -142,7 +142,7 @@ }; }; - sata_phy3: sata_phy@00132100 { + sata_phy3: sata_phy@132100 { compatible = "brcm,iproc-sr-sata-phy"; reg = <0x00132100 0x1000>; reg-names = "phy"; @@ -156,7 +156,7 @@ }; }; - sata4: ahci@00330000 { + sata4: ahci@330000 { compatible = "brcm,iproc-ahci", "generic-ahci"; reg = <0x00330000 0x1000>; reg-names = "ahci"; @@ -172,7 +172,7 @@ }; }; - sata_phy4: sata_phy@00332100 { + sata_phy4: sata_phy@332100 { compatible = "brcm,iproc-sr-sata-phy"; reg = <0x00332100 0x1000>; reg-names = "phy"; @@ -186,7 +186,7 @@ }; }; - sata5: ahci@00400000 { + sata5: ahci@400000 { compatible = "brcm,iproc-ahci", "generic-ahci"; reg = <0x00400000 0x1000>; reg-names = "ahci"; @@ -202,7 +202,7 @@ }; }; - sata_phy5: sata_phy@00402100 { + sata_phy5: sata_phy@402100 { compatible = "brcm,iproc-sr-sata-phy"; reg = <0x00402100 0x1000>; reg-names = "phy"; @@ -216,7 +216,7 @@ }; }; - sata6: ahci@00410000 { + sata6: ahci@410000 { compatible = "brcm,iproc-ahci", "generic-ahci"; reg = <0x00410000 0x1000>; reg-names = "ahci"; @@ -232,7 +232,7 @@ }; }; - sata_phy6: sata_phy@00412100 { + sata_phy6: sata_phy@412100 { compatible = "brcm,iproc-sr-sata-phy"; reg = <0x00412100 0x1000>; reg-names = "phy"; @@ -246,7 +246,7 @@ }; }; - sata7: ahci@00420000 { + sata7: ahci@420000 { compatible = "brcm,iproc-ahci", "generic-ahci"; reg = <0x00420000 0x1000>; reg-names = "ahci"; @@ -262,7 +262,7 @@ }; }; - sata_phy7: sata_phy@00422100 { + sata_phy7: sata_phy@422100 { compatible = "brcm,iproc-sr-sata-phy"; reg = <0x00422100 0x1000>; reg-names = "phy"; diff --git a/arch/arm64/boot/dts/broadcom/stingray/stingray.dtsi b/arch/arm64/boot/dts/broadcom/stingray/stingray.dtsi index e6f75c633623..99aaff0b6d72 100644 --- a/arch/arm64/boot/dts/broadcom/stingray/stingray.dtsi +++ b/arch/arm64/boot/dts/broadcom/stingray/stingray.dtsi @@ -42,7 +42,7 @@ #address-cells = <2>; #size-cells = <0>; - cpu@000 { + cpu@0 { device_type = "cpu"; compatible = "arm,cortex-a72", "arm,armv8"; reg = <0x0 0x0>; @@ -50,7 +50,7 @@ next-level-cache = <&CLUSTER0_L2>; }; - cpu@001 { + cpu@1 { device_type = "cpu"; compatible = "arm,cortex-a72", "arm,armv8"; reg = <0x0 0x1>; @@ -106,7 +106,7 @@ next-level-cache = <&CLUSTER3_L2>; }; - CLUSTER0_L2: l2-cache@000 { + CLUSTER0_L2: l2-cache@0 { compatible = "cache"; }; @@ -152,13 +152,13 @@ #size-cells = <1>; ranges = <0x0 0x0 0x61000000 0x05000000>; - ccn: ccn@00000000 { + ccn: ccn@0 { compatible = "arm,ccn-502"; reg = <0x00000000 0x900000>; interrupts = <GIC_SPI 799 IRQ_TYPE_LEVEL_HIGH>; }; - gic: interrupt-controller@02c00000 { + gic: interrupt-controller@2c00000 { compatible = "arm,gic-v3"; #interrupt-cells = <3>; #address-cells = <1>; @@ -177,7 +177,7 @@ }; }; - smmu: mmu@03000000 { + smmu: mmu@3000000 { compatible = "arm,mmu-500"; reg = <0x03000000 0x80000>; #global-interrupts = <1>; @@ -258,7 +258,7 @@ #include "stingray-clock.dtsi" - gpio_crmu: gpio@00024800 { + gpio_crmu: gpio@24800 { compatible = "brcm,iproc-gpio"; reg = <0x00024800 0x4c>; ngpios = <6>; @@ -278,7 +278,7 @@ #include "stingray-pinctrl.dtsi" - mdio_mux_iproc: mdio-mux@0002023c { + mdio_mux_iproc: mdio-mux@2023c { compatible = "brcm,mdio-mux-iproc"; reg = <0x0002023c 0x14>; #address-cells = <1>; @@ -309,7 +309,7 @@ }; }; - pwm: pwm@00010000 { + pwm: pwm@10000 { compatible = "brcm,iproc-pwm"; reg = <0x00010000 0x1000>; clocks = <&crmu_ref25m>; @@ -317,7 +317,7 @@ status = "disabled"; }; - timer0: timer@00030000 { + timer0: timer@30000 { compatible = "arm,sp804", "arm,primecell"; reg = <0x00030000 0x1000>; interrupts = <GIC_SPI 179 IRQ_TYPE_LEVEL_HIGH>; @@ -328,7 +328,7 @@ status = "disabled"; }; - timer1: timer@00040000 { + timer1: timer@40000 { compatible = "arm,sp804", "arm,primecell"; reg = <0x00040000 0x1000>; interrupts = <GIC_SPI 180 IRQ_TYPE_LEVEL_HIGH>; @@ -338,7 +338,7 @@ clock-names = "timer1", "timer2", "apb_pclk"; }; - timer2: timer@00050000 { + timer2: timer@50000 { compatible = "arm,sp804", "arm,primecell"; reg = <0x00050000 0x1000>; interrupts = <GIC_SPI 181 IRQ_TYPE_LEVEL_HIGH>; @@ -349,7 +349,7 @@ status = "disabled"; }; - timer3: timer@00060000 { + timer3: timer@60000 { compatible = "arm,sp804", "arm,primecell"; reg = <0x00060000 0x1000>; interrupts = <GIC_SPI 182 IRQ_TYPE_LEVEL_HIGH>; @@ -360,7 +360,7 @@ status = "disabled"; }; - timer4: timer@00070000 { + timer4: timer@70000 { compatible = "arm,sp804", "arm,primecell"; reg = <0x00070000 0x1000>; interrupts = <GIC_SPI 207 IRQ_TYPE_LEVEL_HIGH>; @@ -371,7 +371,7 @@ status = "disabled"; }; - timer5: timer@00080000 { + timer5: timer@80000 { compatible = "arm,sp804", "arm,primecell"; reg = <0x00080000 0x1000>; interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>; @@ -382,7 +382,7 @@ status = "disabled"; }; - timer6: timer@00090000 { + timer6: timer@90000 { compatible = "arm,sp804", "arm,primecell"; reg = <0x00090000 0x1000>; interrupts = <GIC_SPI 209 IRQ_TYPE_LEVEL_HIGH>; @@ -393,7 +393,7 @@ status = "disabled"; }; - timer7: timer@000a0000 { + timer7: timer@a0000 { compatible = "arm,sp804", "arm,primecell"; reg = <0x000a0000 0x1000>; interrupts = <GIC_SPI 210 IRQ_TYPE_LEVEL_HIGH>; @@ -404,7 +404,7 @@ status = "disabled"; }; - i2c0: i2c@000b0000 { + i2c0: i2c@b0000 { compatible = "brcm,iproc-i2c"; reg = <0x000b0000 0x100>; #address-cells = <1>; @@ -414,7 +414,7 @@ status = "disabled"; }; - wdt0: watchdog@000c0000 { + wdt0: watchdog@c0000 { compatible = "arm,sp805", "arm,primecell"; reg = <0x000c0000 0x1000>; interrupts = <GIC_SPI 189 IRQ_TYPE_LEVEL_HIGH>; @@ -422,7 +422,7 @@ clock-names = "wdogclk", "apb_pclk"; }; - gpio_hsls: gpio@000d0000 { + gpio_hsls: gpio@d0000 { compatible = "brcm,iproc-gpio"; reg = <0x000d0000 0x864>; ngpios = <151>; @@ -448,7 +448,7 @@ <&pinmux 151 91 4>; }; - i2c1: i2c@000e0000 { + i2c1: i2c@e0000 { compatible = "brcm,iproc-i2c"; reg = <0x000e0000 0x100>; #address-cells = <1>; @@ -458,7 +458,7 @@ status = "disabled"; }; - uart0: uart@00100000 { + uart0: uart@100000 { device_type = "serial"; compatible = "snps,dw-apb-uart"; reg = <0x00100000 0x1000>; @@ -469,7 +469,7 @@ status = "disabled"; }; - uart1: uart@00110000 { + uart1: uart@110000 { device_type = "serial"; compatible = "snps,dw-apb-uart"; reg = <0x00110000 0x1000>; @@ -480,7 +480,7 @@ status = "disabled"; }; - uart2: uart@00120000 { + uart2: uart@120000 { device_type = "serial"; compatible = "snps,dw-apb-uart"; reg = <0x00120000 0x1000>; @@ -491,7 +491,7 @@ status = "disabled"; }; - uart3: uart@00130000 { + uart3: uart@130000 { device_type = "serial"; compatible = "snps,dw-apb-uart"; reg = <0x00130000 0x1000>; @@ -502,7 +502,7 @@ status = "disabled"; }; - ssp0: ssp@00180000 { + ssp0: ssp@180000 { compatible = "arm,pl022", "arm,primecell"; reg = <0x00180000 0x1000>; interrupts = <GIC_SPI 187 IRQ_TYPE_LEVEL_HIGH>; @@ -514,7 +514,7 @@ status = "disabled"; }; - ssp1: ssp@00190000 { + ssp1: ssp@190000 { compatible = "arm,pl022", "arm,primecell"; reg = <0x00190000 0x1000>; interrupts = <GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>; @@ -526,12 +526,12 @@ status = "disabled"; }; - hwrng: hwrng@00220000 { + hwrng: hwrng@220000 { compatible = "brcm,iproc-rng200"; reg = <0x00220000 0x28>; }; - dma0: dma@00310000 { + dma0: dma@310000 { compatible = "arm,pl330", "arm,primecell"; reg = <0x00310000 0x1000>; interrupts = <GIC_SPI 193 IRQ_TYPE_LEVEL_HIGH>, @@ -551,7 +551,7 @@ iommus = <&smmu 0x6000 0x0000>; }; - enet: ethernet@00340000{ + enet: ethernet@340000{ compatible = "brcm,amac"; reg = <0x00340000 0x1000>; reg-names = "amac_base"; @@ -560,7 +560,7 @@ status= "disabled"; }; - nand: nand@00360000 { + nand: nand@360000 { compatible = "brcm,nand-iproc", "brcm,brcmnand-v6.1"; reg = <0x00360000 0x600>, <0x0050a408 0x600>, @@ -573,7 +573,7 @@ status = "disabled"; }; - sdio0: sdhci@003f1000 { + sdio0: sdhci@3f1000 { compatible = "brcm,sdhci-iproc"; reg = <0x003f1000 0x100>; interrupts = <GIC_SPI 204 IRQ_TYPE_LEVEL_HIGH>; @@ -583,7 +583,7 @@ status = "disabled"; }; - sdio1: sdhci@003f2000 { + sdio1: sdhci@3f2000 { compatible = "brcm,sdhci-iproc"; reg = <0x003f2000 0x100>; interrupts = <GIC_SPI 205 IRQ_TYPE_LEVEL_HIGH>; diff --git a/arch/arm64/boot/dts/cavium/thunder-88xx.dts b/arch/arm64/boot/dts/cavium/thunder-88xx.dts index 800ba65991f7..5ec2bfa5f714 100644 --- a/arch/arm64/boot/dts/cavium/thunder-88xx.dts +++ b/arch/arm64/boot/dts/cavium/thunder-88xx.dts @@ -60,7 +60,7 @@ serial1 = &uaa1; }; - memory@00000000 { + memory@0 { device_type = "memory"; reg = <0x0 0x00000000 0x0 0x80000000>; }; diff --git a/arch/arm64/boot/dts/cavium/thunder-88xx.dtsi b/arch/arm64/boot/dts/cavium/thunder-88xx.dtsi index 04dc8a8d1539..1a9103b269cb 100644 --- a/arch/arm64/boot/dts/cavium/thunder-88xx.dtsi +++ b/arch/arm64/boot/dts/cavium/thunder-88xx.dtsi @@ -62,97 +62,97 @@ #address-cells = <2>; #size-cells = <0>; - cpu@000 { + cpu@0 { device_type = "cpu"; compatible = "cavium,thunder", "arm,armv8"; reg = <0x0 0x000>; enable-method = "psci"; }; - cpu@001 { + cpu@1 { device_type = "cpu"; compatible = "cavium,thunder", "arm,armv8"; reg = <0x0 0x001>; enable-method = "psci"; }; - cpu@002 { + cpu@2 { device_type = "cpu"; compatible = "cavium,thunder", "arm,armv8"; reg = <0x0 0x002>; enable-method = "psci"; }; - cpu@003 { + cpu@3 { device_type = "cpu"; compatible = "cavium,thunder", "arm,armv8"; reg = <0x0 0x003>; enable-method = "psci"; }; - cpu@004 { + cpu@4 { device_type = "cpu"; compatible = "cavium,thunder", "arm,armv8"; reg = <0x0 0x004>; enable-method = "psci"; }; - cpu@005 { + cpu@5 { device_type = "cpu"; compatible = "cavium,thunder", "arm,armv8"; reg = <0x0 0x005>; enable-method = "psci"; }; - cpu@006 { + cpu@6 { device_type = "cpu"; compatible = "cavium,thunder", "arm,armv8"; reg = <0x0 0x006>; enable-method = "psci"; }; - cpu@007 { + cpu@7 { device_type = "cpu"; compatible = "cavium,thunder", "arm,armv8"; reg = <0x0 0x007>; enable-method = "psci"; }; - cpu@008 { + cpu@8 { device_type = "cpu"; compatible = "cavium,thunder", "arm,armv8"; reg = <0x0 0x008>; enable-method = "psci"; }; - cpu@009 { + cpu@9 { device_type = "cpu"; compatible = "cavium,thunder", "arm,armv8"; reg = <0x0 0x009>; enable-method = "psci"; }; - cpu@00a { + cpu@a { device_type = "cpu"; compatible = "cavium,thunder", "arm,armv8"; reg = <0x0 0x00a>; enable-method = "psci"; }; - cpu@00b { + cpu@b { device_type = "cpu"; compatible = "cavium,thunder", "arm,armv8"; reg = <0x0 0x00b>; enable-method = "psci"; }; - cpu@00c { + cpu@c { device_type = "cpu"; compatible = "cavium,thunder", "arm,armv8"; reg = <0x0 0x00c>; enable-method = "psci"; }; - cpu@00d { + cpu@d { device_type = "cpu"; compatible = "cavium,thunder", "arm,armv8"; reg = <0x0 0x00d>; enable-method = "psci"; }; - cpu@00e { + cpu@e { device_type = "cpu"; compatible = "cavium,thunder", "arm,armv8"; reg = <0x0 0x00e>; enable-method = "psci"; }; - cpu@00f { + cpu@f { device_type = "cpu"; compatible = "cavium,thunder", "arm,armv8"; reg = <0x0 0x00f>; diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1012a-qds.dts b/arch/arm64/boot/dts/freescale/fsl-ls1012a-qds.dts index 8c013b54db14..cdc4aee75227 100644 --- a/arch/arm64/boot/dts/freescale/fsl-ls1012a-qds.dts +++ b/arch/arm64/boot/dts/freescale/fsl-ls1012a-qds.dts @@ -93,6 +93,39 @@ }; }; +&dspi { + bus-num = <0>; + status = "okay"; + + flash@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "n25q128a11", "jedec,spi-nor"; + reg = <0>; + spi-max-frequency = <10000000>; + }; + + flash@1 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "sst25wf040b", "jedec,spi-nor"; + spi-cpol; + spi-cpha; + reg = <1>; + spi-max-frequency = <10000000>; + }; + + flash@2 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "en25s64", "jedec,spi-nor"; + spi-cpol; + spi-cpha; + reg = <2>; + spi-max-frequency = <10000000>; + }; +}; + &duart0 { status = "okay"; }; diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1012a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1012a.dtsi index fe1ea5d707a8..82b272fb41b9 100644 --- a/arch/arm64/boot/dts/freescale/fsl-ls1012a.dtsi +++ b/arch/arm64/boot/dts/freescale/fsl-ls1012a.dtsi @@ -355,6 +355,19 @@ status = "disabled"; }; + dspi: dspi@2100000 { + compatible = "fsl,ls1012a-dspi", "fsl,ls1021a-v1.0-dspi"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x0 0x2100000 0x0 0x10000>; + interrupts = <0 64 IRQ_TYPE_LEVEL_HIGH>; + clock-names = "dspi"; + clocks = <&clockgen 4 0>; + spi-num-chipselects = <5>; + big-endian; + status = "disabled"; + }; + duart0: serial@21c0500 { compatible = "fsl,ns16550", "ns16550a"; reg = <0x00 0x21c0500 0x0 0x100>; @@ -503,4 +516,11 @@ <0000 0 0 4 &gic 0 113 IRQ_TYPE_LEVEL_HIGH>; }; }; + + firmware { + optee { + compatible = "linaro,optee-tz"; + method = "smc"; + }; + }; }; diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi index d16b9cc1e825..380e7c713395 100644 --- a/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi +++ b/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi @@ -376,14 +376,14 @@ qman: qman@1880000 { compatible = "fsl,qman"; reg = <0x0 0x1880000 0x0 0x10000>; - interrupts = <0 45 0x4>; + interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>; memory-region = <&qman_fqd &qman_pfdr>; }; bman: bman@1890000 { compatible = "fsl,bman"; reg = <0x0 0x1890000 0x0 0x10000>; - interrupts = <0 45 0x4>; + interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>; memory-region = <&bman_fbpr>; }; @@ -749,6 +749,13 @@ }; }; + firmware { + optee { + compatible = "linaro,optee-tz"; + method = "smc"; + }; + }; + }; #include "qoriq-qman-portals.dtsi" diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi index e8a478ca1485..06b5e12d04d8 100644 --- a/arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi +++ b/arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi @@ -281,7 +281,7 @@ qman: qman@1880000 { compatible = "fsl,qman"; reg = <0x0 0x1880000 0x0 0x10000>; - interrupts = <0 45 0x4>; + interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>; memory-region = <&qman_fqd &qman_pfdr>; }; @@ -289,7 +289,7 @@ bman: bman@1890000 { compatible = "fsl,bman"; reg = <0x0 0x1890000 0x0 0x10000>; - interrupts = <0 45 0x4>; + interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>; memory-region = <&bman_fbpr>; }; @@ -764,6 +764,13 @@ no-map; }; }; + + firmware { + optee { + compatible = "linaro,optee-tz"; + method = "smc"; + }; + }; }; #include "qoriq-qman-portals.dtsi" diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi index 33797b373674..bd80e9a2e67c 100644 --- a/arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi +++ b/arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi @@ -147,6 +147,15 @@ <0x0 0x0c0d0000 0 0x1000>, /* GICH */ <0x0 0x0c0e0000 0 0x20000>; /* GICV */ interrupts = <1 9 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <2>; + #size-cells = <2>; + ranges; + + its: gic-its@6020000 { + compatible = "arm,gic-v3-its"; + msi-controller; + reg = <0x0 0x6020000 0 0x20000>; + }; }; timer { @@ -434,6 +443,85 @@ interrupts = <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>; }; }; + + pcie@3400000 { + compatible = "fsl,ls1088a-pcie", "snps,dw-pcie"; + reg = <0x00 0x03400000 0x0 0x00100000 /* controller registers */ + 0x20 0x00000000 0x0 0x00002000>; /* configuration space */ + reg-names = "regs", "config"; + interrupts = <0 108 IRQ_TYPE_LEVEL_HIGH>; /* aer interrupt */ + interrupt-names = "aer"; + #address-cells = <3>; + #size-cells = <2>; + device_type = "pci"; + dma-coherent; + num-lanes = <4>; + bus-range = <0x0 0xff>; + ranges = <0x81000000 0x0 0x00000000 0x20 0x00010000 0x0 0x00010000 /* downstream I/O */ + 0x82000000 0x0 0x40000000 0x20 0x40000000 0x0 0x40000000>; /* non-prefetchable memory */ + msi-parent = <&its>; + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 0 7>; + interrupt-map = <0000 0 0 1 &gic 0 0 0 109 IRQ_TYPE_LEVEL_HIGH>, + <0000 0 0 2 &gic 0 0 0 110 IRQ_TYPE_LEVEL_HIGH>, + <0000 0 0 3 &gic 0 0 0 111 IRQ_TYPE_LEVEL_HIGH>, + <0000 0 0 4 &gic 0 0 0 112 IRQ_TYPE_LEVEL_HIGH>; + }; + + pcie@3500000 { + compatible = "fsl,ls1088a-pcie", "snps,dw-pcie"; + reg = <0x00 0x03500000 0x0 0x00100000 /* controller registers */ + 0x28 0x00000000 0x0 0x00002000>; /* configuration space */ + reg-names = "regs", "config"; + interrupts = <0 113 IRQ_TYPE_LEVEL_HIGH>; /* aer interrupt */ + interrupt-names = "aer"; + #address-cells = <3>; + #size-cells = <2>; + device_type = "pci"; + dma-coherent; + num-lanes = <4>; + bus-range = <0x0 0xff>; + ranges = <0x81000000 0x0 0x00000000 0x28 0x00010000 0x0 0x00010000 /* downstream I/O */ + 0x82000000 0x0 0x40000000 0x28 0x40000000 0x0 0x40000000>; /* non-prefetchable memory */ + msi-parent = <&its>; + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 0 7>; + interrupt-map = <0000 0 0 1 &gic 0 0 0 114 IRQ_TYPE_LEVEL_HIGH>, + <0000 0 0 2 &gic 0 0 0 115 IRQ_TYPE_LEVEL_HIGH>, + <0000 0 0 3 &gic 0 0 0 116 IRQ_TYPE_LEVEL_HIGH>, + <0000 0 0 4 &gic 0 0 0 117 IRQ_TYPE_LEVEL_HIGH>; + }; + + pcie@3600000 { + compatible = "fsl,ls1088a-pcie", "snps,dw-pcie"; + reg = <0x00 0x03600000 0x0 0x00100000 /* controller registers */ + 0x30 0x00000000 0x0 0x00002000>; /* configuration space */ + reg-names = "regs", "config"; + interrupts = <0 118 IRQ_TYPE_LEVEL_HIGH>; /* aer interrupt */ + interrupt-names = "aer"; + #address-cells = <3>; + #size-cells = <2>; + device_type = "pci"; + dma-coherent; + num-lanes = <8>; + bus-range = <0x0 0xff>; + ranges = <0x81000000 0x0 0x00000000 0x30 0x00010000 0x0 0x00010000 /* downstream I/O */ + 0x82000000 0x0 0x40000000 0x30 0x40000000 0x0 0x40000000>; /* non-prefetchable memory */ + msi-parent = <&its>; + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 0 7>; + interrupt-map = <0000 0 0 1 &gic 0 0 0 119 IRQ_TYPE_LEVEL_HIGH>, + <0000 0 0 2 &gic 0 0 0 120 IRQ_TYPE_LEVEL_HIGH>, + <0000 0 0 3 &gic 0 0 0 121 IRQ_TYPE_LEVEL_HIGH>, + <0000 0 0 4 &gic 0 0 0 122 IRQ_TYPE_LEVEL_HIGH>; + }; + }; + + firmware { + optee { + compatible = "linaro,optee-tz"; + method = "smc"; + }; }; }; diff --git a/arch/arm64/boot/dts/freescale/fsl-ls2088a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls2088a.dtsi index 6aa319dae396..aeaef01d375f 100644 --- a/arch/arm64/boot/dts/freescale/fsl-ls2088a.dtsi +++ b/arch/arm64/boot/dts/freescale/fsl-ls2088a.dtsi @@ -151,6 +151,7 @@ }; &pcie1 { + compatible = "fsl,ls2088a-pcie", "snps,dw-pcie"; reg = <0x00 0x03400000 0x0 0x00100000 /* controller registers */ 0x20 0x00000000 0x0 0x00002000>; /* configuration space */ @@ -159,6 +160,7 @@ }; &pcie2 { + compatible = "fsl,ls2088a-pcie", "snps,dw-pcie"; reg = <0x00 0x03500000 0x0 0x00100000 /* controller registers */ 0x28 0x00000000 0x0 0x00002000>; /* configuration space */ @@ -167,6 +169,7 @@ }; &pcie3 { + compatible = "fsl,ls2088a-pcie", "snps,dw-pcie"; reg = <0x00 0x03600000 0x0 0x00100000 /* controller registers */ 0x30 0x00000000 0x0 0x00002000>; /* configuration space */ @@ -175,6 +178,7 @@ }; &pcie4 { + compatible = "fsl,ls2088a-pcie", "snps,dw-pcie"; reg = <0x00 0x03700000 0x0 0x00100000 /* controller registers */ 0x38 0x00000000 0x0 0x00002000>; /* configuration space */ diff --git a/arch/arm64/boot/dts/freescale/fsl-ls208xa.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls208xa.dtsi index 4fb9a0966a84..f3a40af33af8 100644 --- a/arch/arm64/boot/dts/freescale/fsl-ls208xa.dtsi +++ b/arch/arm64/boot/dts/freescale/fsl-ls208xa.dtsi @@ -786,4 +786,11 @@ interrupts = <0 18 0x4>; little-endian; }; + + firmware { + optee { + compatible = "linaro,optee-tz"; + method = "smc"; + }; + }; }; diff --git a/arch/arm64/boot/dts/hisilicon/hi3660-hikey960.dts b/arch/arm64/boot/dts/hisilicon/hi3660-hikey960.dts index e9f87cb61ade..97d768730952 100644 --- a/arch/arm64/boot/dts/hisilicon/hi3660-hikey960.dts +++ b/arch/arm64/boot/dts/hisilicon/hi3660-hikey960.dts @@ -197,6 +197,325 @@ }; }; +/* + * Legend: proper name = the GPIO line is used as GPIO + * NC = not connected (pin out but not routed from the chip to + * anything the board) + * "[PER]" = pin is muxed for [peripheral] (not GPIO) + * "" = no idea, schematic doesn't say, could be + * unrouted (not connected to any external pin) + * LSEC = Low Speed External Connector + * HSEC = High Speed External Connector + * + * Line names are taken from "HiKey 960 Board ver A" schematics + * from Huawei. The 40 pin low speed expansion connector is named + * J2002 63453-140LF. + * + * For the lines routed to the external connectors the + * lines are named after the 96Boards CE Specification 1.0, + * Appendix "Expansion Connector Signal Description". + * + * When the 96Board naming of a line and the schematic name of + * the same line are in conflict, the 96Board specification + * takes precedence, which means that the external UART on the + * LSEC is named UART0 while the schematic and SoC names this + * UART3. This is only for the informational lines i.e. "[FOO]", + * the GPIO named lines "GPIO-A" thru "GPIO-L" are the only + * ones actually used for GPIO. + */ +&gpio0 { + /* GPIO_000-GPIO_007 */ + gpio-line-names = + "", + "TP901", /* TEST_MODE connected to TP901 */ + "[PMU0_SSI]", + "[PMU1_SSI]", + "[PMU2_SSI]", + "[PMU0_CLKOUT]", + "[JTAG_TCK]", + "[JTAG_TMS]"; +}; + +&gpio1 { + /* GPIO_008-GPIO_015 */ + gpio-line-names = + "[JTAG_TRST_N]", + "[JTAG_TDI]", + "[JTAG_TDO]", + "NC", "NC", + "[I2C3_SCL]", + "[I2C3_SDA]", + "NC"; +}; + +&gpio2 { + /* GPIO_016-GPIO_023 */ + gpio-line-names = + "NC", "NC", "NC", + "GPIO-J", /* LSEC pin 32: GPIO_019 */ + "GPIO_020_HDMI_SEL", + "GPIO-L", /* LSEC pin 34: GPIO_021 */ + "GPIO_022_UFSBUCK_INT_N", + "GPIO-G"; /* LSEC pin 29: LCD_TE0 */ +}; + +&gpio3 { + /* GPIO_024-GPIO_031 */ + /* The rail from pin BK36 is named LCD_TE0, we assume to be muxed as GPIO for GPIO-G */ + gpio-line-names = + "[CSI0_MCLK]", /* HSEC pin 15: ISP_CCLK0_MCAM */ + "[CSI1_MCLK]", /* HSEC pin 17: ISP_CCLK1_SCAM */ + "NC", + "[I2C2_SCL]", /* HSEC pin 32: ISP_SCL0 */ + "[I2C2_SDA]", /* HSEC pin 34: ISP_SDA0 */ + "[I2C3_SCL]", /* HSEC pin 36: ISP_SCL1 */ + "[I2C3_SDA]", /* HSEC pin 38: ISP_SDA1 */ + "NC"; +}; + +&gpio4 { + /* GPIO_032-GPIO_039 */ + gpio-line-names = + "NC", "NC", + "PWR_BTN_N", /* LSEC pin 4: GPIO_034_PWRON_DET */ + "GPIO_035_PMU2_EN", + "GPIO_036_USB_HUB_RESET", + "NC", "NC", "NC"; +}; + +&gpio5 { + /* GPIO_040-GPIO_047 */ + gpio-line-names = + "GPIO-H", /* LSEC pin 30: GPIO_040_LCD_RST_N */ + "GPIO_041_HDMI_PD", + "TP904", /* Test point */ + "TP905", /* Test point */ + "NC", "NC", + "GPIO_046_HUB_VDD33_EN", + "GPIO_047_PMU1_EN"; +}; + +&gpio6 { + /* GPIO_048-GPIO_055 */ + gpio-line-names = + "NC", "NC", "NC", + "GPIO_051_WIFI_EN", + "GPIO-I", /* LSEC pin 31: GPIO_052_CAM0_RST_N */ + /* + * These two pins should be used for SD(IO) data according to the + * 96boards specification but seems to be repurposed for a IRDA UART. + * They are however named according to the spec. + */ + "[SD_DAT1]", /* HSEC pin 3: UART0_IRDA_RXD */ + "[SD_DAT2]", /* HSEC pin 5: UART0_IRDA_TXD */ + "[UART1_RXD]"; /* LSEC pin 13: DEBUG_UART6_RXD */ +}; + +&gpio7 { + /* GPIO_056-GPIO_063 */ + gpio-line-names = + "[UART1_TXD]", /* LSEC pin 11: DEBUG_UART6_TXD */ + "[UART0_CTS]", /* LSEC pin 3: UART3_CTS_N */ + "[UART0_RTS]", /* LSEC pin 9: UART3_RTS_N */ + "[UART0_RXD]", /* LSEC pin 7: UART3_RXD */ + "[UART0_TXD]", /* LSEC pin 5: UART3_TXD */ + "[SOC_BT_UART4_CTS_N]", + "[SOC_BT_UART4_RTS_N]", + "[SOC_BT_UART4_RXD]"; +}; + +&gpio8 { + /* GPIO_064-GPIO_071 */ + gpio-line-names = + "[SOC_BT_UART4_TXD]", + "NC", + "[PMU_HKADC_SSI]", + "NC", + "GPIO_068_SEL", + "NC", "NC", "NC"; + +}; + +&gpio9 { + /* GPIO_072-GPIO_079 */ + gpio-line-names = + "NC", "NC", "NC", + "GPIO-K", /* LSEC pin 33: GPIO_075_CAM1_RST_N */ + "NC", "NC", "NC", "NC"; +}; + +&gpio10 { + /* GPIO_080-GPIO_087 */ + gpio-line-names = "NC", "NC", "NC", "NC", "NC", "NC", "NC", "NC"; +}; + +&gpio11 { + /* GPIO_088-GPIO_095 */ + gpio-line-names = + "NC", + "[PCIE_PERST_N]", + "NC", "NC", "NC", "NC", "NC", "NC"; +}; + +&gpio12 { + /* GPIO_096-GPIO_103 */ + gpio-line-names = "NC", "NC", "NC", "", "", "", "", "NC"; +}; + +&gpio13 { + /* GPIO_104-GPIO_111 */ + gpio-line-names = "NC", "NC", "NC", "NC", "NC", "NC", "NC", "NC"; +}; + +&gpio14 { + /* GPIO_112-GPIO_119 */ + gpio-line-names = "NC", "NC", "NC", "NC", "NC", "NC", "NC", "NC"; +}; + +&gpio15 { + /* GPIO_120-GPIO_127 */ + gpio-line-names = + "NC", "NC", "NC", "NC", "NC", "NC", + "GPIO_126_BT_EN", + "TP902"; /* GPIO_127_JTAG_SEL0 */ +}; + +&gpio16 { + /* GPIO_128-GPIO_135 */ + gpio-line-names = "", "", "", "", "", "", "", ""; +}; + +&gpio17 { + /* GPIO_136-GPIO_143 */ + gpio-line-names = "", "", "", "", "", "", "", ""; +}; + +&gpio18 { + /* GPIO_144-GPIO_151 */ + gpio-line-names = + "[UFS_REF_CLK]", + "[UFS_RST_N]", + "[SPI1_SCLK]", /* HSEC pin 9: GPIO_146_SPI3_CLK */ + "[SPI1_DIN]", /* HSEC pin 11: GPIO_147_SPI3_DI */ + "[SPI1_DOUT]", /* HSEC pin 1: GPIO_148_SPI3_DO */ + "[SPI1_CS]", /* HSEC pin 7: GPIO_149_SPI3_CS0_N */ + "GPIO_150_USER_LED1", + "GPIO_151_USER_LED2"; +}; + +&gpio19 { + /* GPIO_152-GPIO_159 */ + gpio-line-names = "NC", "NC", "NC", "NC", "", "", "", ""; +}; + +&gpio20 { + /* GPIO_160-GPIO_167 */ + gpio-line-names = + "[SD_CLK]", + "[SD_CMD]", + "[SD_DATA0]", + "[SD_DATA1]", + "[SD_DATA2]", + "[SD_DATA3]", + "", ""; +}; + +&gpio21 { + /* GPIO_168-GPIO_175 */ + gpio-line-names = + "[WL_SDIO_CLK]", + "[WL_SDIO_CMD]", + "[WL_SDIO_DATA0]", + "[WL_SDIO_DATA1]", + "[WL_SDIO_DATA2]", + "[WL_SDIO_DATA3]", + "", ""; +}; + +&gpio22 { + /* GPIO_176-GPIO_183 */ + gpio-line-names = + "[GPIO_176_PMU_PWR_HOLD]", + "NA", + "[SYSCLK_EN]", + "GPIO_179_WL_WAKEUP_AP", + "GPIO_180_HDMI_INT", + "NA", + "GPIO-F", /* LSEC pin 28: LCD_BL_PWM */ + "[I2C0_SCL]"; /* LSEC pin 15 */ +}; + +&gpio23 { + /* GPIO_184-GPIO_191 */ + gpio-line-names = + "[I2C0_SDA]", /* LSEC pin 17 */ + "[I2C1_SCL]", /* Actual SoC I2C1 */ + "[I2C1_SDA]", /* Actual SoC I2C1 */ + "[I2C1_SCL]", /* LSEC pin 19: I2C7_SCL */ + "[I2C1_SDA]", /* LSEC pin 21: I2C7_SDA */ + "GPIO_189_USER_LED3", + "GPIO_190_USER_LED4", + ""; +}; + +&gpio24 { + /* GPIO_192-GPIO_199 */ + gpio-line-names = + "[PCM_DI]", /* LSEC pin 22: GPIO_192_I2S0_DI */ + "[PCM_DO]", /* LSEC pin 20: GPIO_193_I2S0_DO */ + "[PCM_CLK]", /* LSEC pin 18: GPIO_194_I2S0_XCLK */ + "[PCM_FS]", /* LSEC pin 16: GPIO_195_I2S0_XFS */ + "[GPIO_196_I2S2_DI]", + "[GPIO_197_I2S2_DO]", + "[GPIO_198_I2S2_XCLK]", + "[GPIO_199_I2S2_XFS]"; +}; + +&gpio25 { + /* GPIO_200-GPIO_207 */ + gpio-line-names = + "NC", + "NC", + "GPIO_202_VBUS_TYPEC", + "GPIO_203_SD_DET", + "GPIO_204_PMU12_IRQ_N", + "GPIO_205_WIFI_ACTIVE", + "GPIO_206_USBSW_SEL", + "GPIO_207_BT_ACTIVE"; +}; + +&gpio26 { + /* GPIO_208-GPIO_215 */ + gpio-line-names = + "GPIO-A", /* LSEC pin 23: GPIO_208 */ + "GPIO-B", /* LSEC pin 24: GPIO_209 */ + "GPIO-C", /* LSEC pin 25: GPIO_210 */ + "GPIO-D", /* LSEC pin 26: GPIO_211 */ + "GPIO-E", /* LSEC pin 27: GPIO_212 */ + "[PCIE_CLKREQ_N]", + "[PCIE_WAKE_N]", + "[SPI0_CLK]"; /* LSEC pin 8: SPI2_CLK */ +}; + +&gpio27 { + /* GPIO_216-GPIO_223 */ + gpio-line-names = + "[SPI0_DIN]", /* LSEC pin 10: SPI2_DI */ + "[SPI0_DOUT]", /* LSEC pin 14: SPI2_DO */ + "[SPI0_CS]", /* LSEC pin 12: SPI2_CS0_N */ + "GPIO_219_CC_INT", + "NC", + "NC", + "[PMU_INT]", + ""; +}; + +&gpio28 { + /* GPIO_224-GPIO_231 */ + gpio-line-names = + "", "", "", "", "", "", "", ""; +}; + &i2c0 { /* On Low speed expansion */ label = "LS-I2C0"; diff --git a/arch/arm64/boot/dts/hisilicon/hi3660.dtsi b/arch/arm64/boot/dts/hisilicon/hi3660.dtsi index 13ae69f5a327..ab0b95ba5ae5 100644 --- a/arch/arm64/boot/dts/hisilicon/hi3660.dtsi +++ b/arch/arm64/boot/dts/hisilicon/hi3660.dtsi @@ -979,5 +979,12 @@ clocks = <&crg_ctrl HI3660_OSC32K>; clock-names = "apb_pclk"; }; + + tsensor: tsensor@fff30000 { + compatible = "hisilicon,hi3660-tsensor"; + reg = <0x0 0xfff30000 0x0 0x1000>; + interrupts = <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>; + #thermal-sensor-cells = <1>; + }; }; }; diff --git a/arch/arm64/boot/dts/hisilicon/hi3798cv200-poplar.dts b/arch/arm64/boot/dts/hisilicon/hi3798cv200-poplar.dts index b9142871d6fe..a6fd13389f8d 100644 --- a/arch/arm64/boot/dts/hisilicon/hi3798cv200-poplar.dts +++ b/arch/arm64/boot/dts/hisilicon/hi3798cv200-poplar.dts @@ -78,17 +78,17 @@ &gpio1 { status = "okay"; - gpio-line-names = "LS-GPIO-E", "", + gpio-line-names = "GPIO-E", "", "", "", - "", "LS-GPIO-F", - "", "LS-GPIO-J"; + "", "GPIO-F", + "", "GPIO-J"; }; &gpio2 { status = "okay"; - gpio-line-names = "LS-GPIO-H", "LS-GPIO-I", - "LS-GPIO-L", "LS-GPIO-G", - "LS-GPIO-K", "", + gpio-line-names = "GPIO-H", "GPIO-I", + "GPIO-L", "GPIO-G", + "GPIO-K", "", "", ""; }; @@ -96,15 +96,15 @@ status = "okay"; gpio-line-names = "", "", "", "", - "LS-GPIO-C", "", - "", "LS-GPIO-B"; + "GPIO-C", "", + "", "GPIO-B"; }; &gpio4 { status = "okay"; gpio-line-names = "", "", "", "", - "", "LS-GPIO-D", + "", "GPIO-D", "", ""; }; @@ -112,7 +112,7 @@ status = "okay"; gpio-line-names = "", "USER-LED-1", "USER-LED-2", "", - "", "LS-GPIO-A", + "", "GPIO-A", "", ""; }; diff --git a/arch/arm64/boot/dts/hisilicon/hi6220-coresight.dtsi b/arch/arm64/boot/dts/hisilicon/hi6220-coresight.dtsi new file mode 100644 index 000000000000..7afee5d5087b --- /dev/null +++ b/arch/arm64/boot/dts/hisilicon/hi6220-coresight.dtsi @@ -0,0 +1,381 @@ +/* + * dtsi file for Hisilicon Hi6220 coresight + * + * Copyright (C) 2017 Hisilicon Ltd. + * + * Author: Pengcheng Li <lipengcheng8@huawei.com> + * Leo Yan <leo.yan@linaro.org> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * publishhed by the Free Software Foundation. + * + */ + +/ { + soc { + funnel@f6401000 { + compatible = "arm,coresight-funnel", "arm,primecell"; + reg = <0 0xf6401000 0 0x1000>; + clocks = <&acpu_sctrl HI6220_ACPU_SFT_AT_S>; + clock-names = "apb_pclk"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + soc_funnel_out: endpoint { + remote-endpoint = + <&etf_in>; + }; + }; + + port@1 { + reg = <0>; + soc_funnel_in: endpoint { + slave-mode; + remote-endpoint = + <&acpu_funnel_out>; + }; + }; + }; + }; + + etf@f6402000 { + compatible = "arm,coresight-tmc", "arm,primecell"; + reg = <0 0xf6402000 0 0x1000>; + clocks = <&acpu_sctrl HI6220_ACPU_SFT_AT_S>; + clock-names = "apb_pclk"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + etf_in: endpoint { + slave-mode; + remote-endpoint = + <&soc_funnel_out>; + }; + }; + + port@1 { + reg = <0>; + etf_out: endpoint { + remote-endpoint = + <&replicator_in>; + }; + }; + }; + }; + + replicator { + compatible = "arm,coresight-replicator"; + clocks = <&acpu_sctrl HI6220_ACPU_SFT_AT_S>; + clock-names = "apb_pclk"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + replicator_in: endpoint { + slave-mode; + remote-endpoint = + <&etf_out>; + }; + }; + + port@1 { + reg = <0>; + replicator_out0: endpoint { + remote-endpoint = + <&etr_in>; + }; + }; + + port@2 { + reg = <1>; + replicator_out1: endpoint { + remote-endpoint = + <&tpiu_in>; + }; + }; + }; + }; + + etr@f6404000 { + compatible = "arm,coresight-tmc", "arm,primecell"; + reg = <0 0xf6404000 0 0x1000>; + clocks = <&acpu_sctrl HI6220_ACPU_SFT_AT_S>; + clock-names = "apb_pclk"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + etr_in: endpoint { + slave-mode; + remote-endpoint = + <&replicator_out0>; + }; + }; + }; + }; + + tpiu@f6405000 { + compatible = "arm,coresight-tpiu", "arm,primecell"; + reg = <0 0xf6405000 0 0x1000>; + clocks = <&acpu_sctrl HI6220_ACPU_SFT_AT_S>; + clock-names = "apb_pclk"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + tpiu_in: endpoint { + slave-mode; + remote-endpoint = + <&replicator_out1>; + }; + }; + }; + }; + + funnel@f6501000 { + compatible = "arm,coresight-funnel", "arm,primecell"; + reg = <0 0xf6501000 0 0x1000>; + clocks = <&acpu_sctrl HI6220_ACPU_SFT_AT_S>; + clock-names = "apb_pclk"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + acpu_funnel_out: endpoint { + remote-endpoint = + <&soc_funnel_in>; + }; + }; + + port@1 { + reg = <0>; + acpu_funnel_in0: endpoint { + slave-mode; + remote-endpoint = + <&etm0_out>; + }; + }; + + port@2 { + reg = <1>; + acpu_funnel_in1: endpoint { + slave-mode; + remote-endpoint = + <&etm1_out>; + }; + }; + + port@3 { + reg = <2>; + acpu_funnel_in2: endpoint { + slave-mode; + remote-endpoint = + <&etm2_out>; + }; + }; + + port@4 { + reg = <3>; + acpu_funnel_in3: endpoint { + slave-mode; + remote-endpoint = + <&etm3_out>; + }; + }; + + port@5 { + reg = <4>; + acpu_funnel_in4: endpoint { + slave-mode; + remote-endpoint = + <&etm4_out>; + }; + }; + + port@6 { + reg = <5>; + acpu_funnel_in5: endpoint { + slave-mode; + remote-endpoint = + <&etm5_out>; + }; + }; + + port@7 { + reg = <6>; + acpu_funnel_in6: endpoint { + slave-mode; + remote-endpoint = + <&etm6_out>; + }; + }; + + port@8 { + reg = <7>; + acpu_funnel_in7: endpoint { + slave-mode; + remote-endpoint = + <&etm7_out>; + }; + }; + }; + }; + + etm@f659c000 { + compatible = "arm,coresight-etm4x", "arm,primecell"; + reg = <0 0xf659c000 0 0x1000>; + + clocks = <&acpu_sctrl HI6220_ACPU_SFT_AT_S>; + clock-names = "apb_pclk"; + + cpu = <&cpu0>; + + port { + etm0_out: endpoint { + remote-endpoint = + <&acpu_funnel_in0>; + }; + }; + }; + + etm@f659d000 { + compatible = "arm,coresight-etm4x", "arm,primecell"; + reg = <0 0xf659d000 0 0x1000>; + + clocks = <&acpu_sctrl HI6220_ACPU_SFT_AT_S>; + clock-names = "apb_pclk"; + + cpu = <&cpu1>; + + port { + etm1_out: endpoint { + remote-endpoint = + <&acpu_funnel_in1>; + }; + }; + }; + + etm@f659e000 { + compatible = "arm,coresight-etm4x", "arm,primecell"; + reg = <0 0xf659e000 0 0x1000>; + + clocks = <&acpu_sctrl HI6220_ACPU_SFT_AT_S>; + clock-names = "apb_pclk"; + + cpu = <&cpu2>; + + port { + etm2_out: endpoint { + remote-endpoint = + <&acpu_funnel_in2>; + }; + }; + }; + + etm@f659f000 { + compatible = "arm,coresight-etm4x", "arm,primecell"; + reg = <0 0xf659f000 0 0x1000>; + + clocks = <&acpu_sctrl HI6220_ACPU_SFT_AT_S>; + clock-names = "apb_pclk"; + + cpu = <&cpu3>; + + port { + etm3_out: endpoint { + remote-endpoint = + <&acpu_funnel_in3>; + }; + }; + }; + + etm@f65dc000 { + compatible = "arm,coresight-etm4x", "arm,primecell"; + reg = <0 0xf65dc000 0 0x1000>; + + clocks = <&acpu_sctrl HI6220_ACPU_SFT_AT_S>; + clock-names = "apb_pclk"; + + cpu = <&cpu4>; + + port { + etm4_out: endpoint { + remote-endpoint = + <&acpu_funnel_in4>; + }; + }; + }; + + etm@f65dd000 { + compatible = "arm,coresight-etm4x", "arm,primecell"; + reg = <0 0xf65dd000 0 0x1000>; + + clocks = <&acpu_sctrl HI6220_ACPU_SFT_AT_S>; + clock-names = "apb_pclk"; + + cpu = <&cpu5>; + + port { + etm5_out: endpoint { + remote-endpoint = + <&acpu_funnel_in5>; + }; + }; + }; + + etm@f65de000 { + compatible = "arm,coresight-etm4x", "arm,primecell"; + reg = <0 0xf65de000 0 0x1000>; + + clocks = <&acpu_sctrl HI6220_ACPU_SFT_AT_S>; + clock-names = "apb_pclk"; + + cpu = <&cpu6>; + + port { + etm6_out: endpoint { + remote-endpoint = + <&acpu_funnel_in6>; + }; + }; + }; + + etm@f65df000 { + compatible = "arm,coresight-etm4x", "arm,primecell"; + reg = <0 0xf65df000 0 0x1000>; + + clocks = <&acpu_sctrl HI6220_ACPU_SFT_AT_S>; + clock-names = "apb_pclk"; + + cpu = <&cpu7>; + + port { + etm7_out: endpoint { + remote-endpoint = + <&acpu_funnel_in7>; + }; + }; + }; + }; +}; diff --git a/arch/arm64/boot/dts/hisilicon/hi6220.dtsi b/arch/arm64/boot/dts/hisilicon/hi6220.dtsi index ff1dc89f599e..6a180d1926e8 100644 --- a/arch/arm64/boot/dts/hisilicon/hi6220.dtsi +++ b/arch/arm64/boot/dts/hisilicon/hi6220.dtsi @@ -987,3 +987,5 @@ }; }; }; + +#include "hi6220-coresight.dtsi" diff --git a/arch/arm64/boot/dts/hisilicon/hip05-d02.dts b/arch/arm64/boot/dts/hisilicon/hip05-d02.dts index abba750b87f8..3bbd017f088f 100644 --- a/arch/arm64/boot/dts/hisilicon/hip05-d02.dts +++ b/arch/arm64/boot/dts/hisilicon/hip05-d02.dts @@ -18,7 +18,7 @@ model = "Hisilicon Hip05 D02 Development Board"; compatible = "hisilicon,hip05-d02"; - memory@00000000 { + memory@0 { device_type = "memory"; reg = <0x0 0x00000000 0x0 0x80000000>; }; diff --git a/arch/arm64/boot/dts/hisilicon/hip06-d03.dts b/arch/arm64/boot/dts/hisilicon/hip06-d03.dts index 7c4114a67753..9af633021a42 100644 --- a/arch/arm64/boot/dts/hisilicon/hip06-d03.dts +++ b/arch/arm64/boot/dts/hisilicon/hip06-d03.dts @@ -17,7 +17,7 @@ model = "Hisilicon Hip06 D03 Development Board"; compatible = "hisilicon,hip06-d03"; - memory@00000000 { + memory@0 { device_type = "memory"; reg = <0x0 0x00000000 0x0 0x40000000>; }; diff --git a/arch/arm64/boot/dts/marvell/armada-3720-db.dts b/arch/arm64/boot/dts/marvell/armada-3720-db.dts index 9df0f06ce607..0f3468e777f7 100644 --- a/arch/arm64/boot/dts/marvell/armada-3720-db.dts +++ b/arch/arm64/boot/dts/marvell/armada-3720-db.dts @@ -94,6 +94,16 @@ 3300000 0x0>; enable-active-high; }; + + vcc_sd_reg2: regulator-vmcc { + compatible = "regulator-fixed"; + regulator-name = "vcc_sd2"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + enable-active-high; + gpio = <&gpio_exp 4 GPIO_ACTIVE_HIGH>; + }; }; /* Gigabit module on CON19(V2.0)/CON21(V1.4) */ @@ -179,6 +189,7 @@ bus-width = <4>; marvell,pad-type = "sd"; vqmmc-supply = <&vcc_sd_reg1>; + vmmc-supply = <&vcc_sd_reg2>; status = "okay"; }; @@ -216,7 +227,7 @@ /* * Exported on the micro USB connector CON30(V2.0)/CON32(V1.4) through - * an FTDI + * an FTDI (also on CON24(V2.0)/CON26(V1.4)). */ &uart0 { pinctrl-names = "default"; @@ -224,6 +235,13 @@ status = "okay"; }; +/* CON26(V2.0)/CON28(V1.4) */ +&uart1 { + pinctrl-names = "default"; + pinctrl-0 = <&uart2_pins>; + status = "okay"; +}; + /* CON27(V2.0)/CON29(V1.4) */ &usb2 { status = "okay"; diff --git a/arch/arm64/boot/dts/marvell/armada-3720-espressobin.dts b/arch/arm64/boot/dts/marvell/armada-3720-espressobin.dts index 2ce52ba74f73..bdfb5553ddb5 100644 --- a/arch/arm64/boot/dts/marvell/armada-3720-espressobin.dts +++ b/arch/arm64/boot/dts/marvell/armada-3720-espressobin.dts @@ -98,9 +98,21 @@ /* Exported on the micro USB connector J5 through an FTDI */ &uart0 { + pinctrl-names = "default"; + pinctrl-0 = <&uart1_pins>; status = "okay"; }; +/* + * Connector J17 and J18 expose a number of different features. Some pins are + * multiplexed. This is the case for instance for the following features: + * - UART1 (pin 24 = RX, pin 26 = TX). See armada-3720-db.dts for an example of + * how to enable it. Beware that the signals are 1.8V TTL. + * - I2C + * - SPI + * - MMC + */ + /* J7 */ &usb3 { status = "okay"; diff --git a/arch/arm64/boot/dts/marvell/armada-37xx.dtsi b/arch/arm64/boot/dts/marvell/armada-37xx.dtsi index 8c0cf7efac65..90c26d616a54 100644 --- a/arch/arm64/boot/dts/marvell/armada-37xx.dtsi +++ b/arch/arm64/boot/dts/marvell/armada-37xx.dtsi @@ -55,6 +55,7 @@ aliases { serial0 = &uart0; + serial1 = &uart1; }; cpus { @@ -134,8 +135,24 @@ uart0: serial@12000 { compatible = "marvell,armada-3700-uart"; - reg = <0x12000 0x400>; - interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>; + reg = <0x12000 0x200>; + clocks = <&xtalclk>; + interrupts = + <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "uart-sum", "uart-tx", "uart-rx"; + status = "disabled"; + }; + + uart1: serial@12200 { + compatible = "marvell,armada-3700-uart-ext"; + reg = <0x12200 0x30>; + clocks = <&xtalclk>; + interrupts = + <GIC_SPI 30 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 31 IRQ_TYPE_EDGE_RISING>; + interrupt-names = "uart-tx", "uart-rx"; status = "disabled"; }; @@ -183,7 +200,6 @@ <GIC_SPI 153 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 154 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>; - }; xtalclk: xtal-clk { diff --git a/arch/arm64/boot/dts/marvell/armada-7040-db.dts b/arch/arm64/boot/dts/marvell/armada-7040-db.dts index 9c3bdf87e543..52b5341cb270 100644 --- a/arch/arm64/boot/dts/marvell/armada-7040-db.dts +++ b/arch/arm64/boot/dts/marvell/armada-7040-db.dts @@ -56,7 +56,7 @@ stdout-path = "serial0:115200n8"; }; - memory@00000000 { + memory@0 { device_type = "memory"; reg = <0x0 0x0 0x0 0x80000000>; }; @@ -124,6 +124,8 @@ &uart0 { status = "okay"; + pinctrl-0 = <&uart0_pins>; + pinctrl-names = "default"; }; @@ -141,9 +143,49 @@ gpio-controller; #gpio-cells = <2>; reg = <0x21>; + /* + * IO0_0: USB3_PWR_EN0 IO1_0: USB_3_1_Dev_Detect + * IO0_1: USB3_PWR_EN1 IO1_1: USB2_1_current_limit + * IO0_2: DDR3_4_Detect IO1_2: Hcon_IO_RstN + * IO0_3: USB2_DEVICE_DETECT + * IO0_4: GPIO_0 IO1_4: SD_Status + * IO0_5: GPIO_1 IO1_5: LDO_5V_Enable + * IO0_6: IHB_5V_Enable IO1_6: PWR_EN_eMMC + * IO0_7: IO1_7: SDIO_Vcntrl + */ }; }; +&cpm_nand { + /* + * SPI on CPM and NAND have common pins on this board. We can + * use only one at a time. To enable the NAND (whihch will + * disable the SPI), the "status = "okay";" line have to be + * added here. + */ + num-cs = <1>; + pinctrl-0 = <&nand_pins>, <&nand_rb>; + pinctrl-names = "default"; + nand-ecc-strength = <4>; + nand-ecc-step-size = <512>; + marvell,nand-enable-arbiter; + nand-on-flash-bbt; + + partition@0 { + label = "U-Boot"; + reg = <0 0x200000>; + }; + partition@200000 { + label = "Linux"; + reg = <0x200000 0xe00000>; + }; + partition@1000000 { + label = "Filesystem"; + reg = <0x1000000 0x3f000000>; + }; +}; + + &cpm_spi1 { status = "okay"; @@ -197,7 +239,7 @@ status = "okay"; bus-width = <4>; no-1-8-v; - non-removable; + cd-gpios = <&expander0 12 GPIO_ACTIVE_LOW>; }; &cpm_mdio { @@ -215,10 +257,21 @@ status = "okay"; }; +&cpm_eth0 { + status = "okay"; + /* Network PHY */ + phy-mode = "10gbase-kr"; + /* Generic PHY, providing serdes lanes */ + phys = <&cpm_comphy2 0>; +}; + &cpm_eth1 { status = "okay"; + /* Network PHY */ phy = <&phy0>; phy-mode = "sgmii"; + /* Generic PHY, providing serdes lanes */ + phys = <&cpm_comphy0 1>; }; &cpm_eth2 { diff --git a/arch/arm64/boot/dts/marvell/armada-70x0.dtsi b/arch/arm64/boot/dts/marvell/armada-70x0.dtsi index 860b6ae9dcc5..0e1a1e5be399 100644 --- a/arch/arm64/boot/dts/marvell/armada-70x0.dtsi +++ b/arch/arm64/boot/dts/marvell/armada-70x0.dtsi @@ -64,5 +64,19 @@ &cpm_syscon0 { cpm_pinctrl: pinctrl { compatible = "marvell,armada-7k-pinctrl"; + + nand_pins: nand-pins { + marvell,pins = + "mpp15", "mpp16", "mpp17", "mpp18", + "mpp19", "mpp20", "mpp21", "mpp22", + "mpp23", "mpp24", "mpp25", "mpp26", + "mpp27"; + marvell,function = "dev"; + }; + + nand_rb: nand-rb { + marvell,pins = "mpp13"; + marvell,function = "nf"; + }; }; }; diff --git a/arch/arm64/boot/dts/marvell/armada-8040-db.dts b/arch/arm64/boot/dts/marvell/armada-8040-db.dts index 0d7b2ae46610..d97b72bed662 100644 --- a/arch/arm64/boot/dts/marvell/armada-8040-db.dts +++ b/arch/arm64/boot/dts/marvell/armada-8040-db.dts @@ -56,7 +56,7 @@ stdout-path = "serial0:115200n8"; }; - memory@00000000 { + memory@0 { device_type = "memory"; reg = <0x0 0x0 0x0 0x80000000>; }; @@ -139,8 +139,14 @@ /* Accessible over the mini-USB CON9 connector on the main board */ &uart0 { status = "okay"; + pinctrl-0 = <&uart0_pins>; + pinctrl-names = "default"; }; +/* CON6 on CP0 expansion */ +&cpm_pcie0 { + status = "okay"; +}; /* CON5 on CP0 expansion */ &cpm_pcie2 { @@ -200,12 +206,27 @@ status = "okay"; }; +&cpm_eth0 { + status = "okay"; + phy-mode = "10gbase-kr"; +}; + &cpm_eth2 { status = "okay"; phy = <&phy1>; phy-mode = "rgmii-id"; }; +/* CON6 on CP1 expansion */ +&cps_pcie0 { + status = "okay"; +}; + +/* CON7 on CP1 expansion */ +&cps_pcie1 { + status = "okay"; +}; + /* CON5 on CP1 expansion */ &cps_pcie2 { status = "okay"; @@ -216,6 +237,37 @@ clock-frequency = <100000>; }; +&cps_spi1 { + status = "okay"; + + spi-flash@0 { + #address-cells = <0x1>; + #size-cells = <0x1>; + compatible = "jedec,spi-nor"; + reg = <0x0>; + spi-max-frequency = <20000000>; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "Boot"; + reg = <0x0 0x200000>; + }; + partition@200000 { + label = "Filesystem"; + reg = <0x200000 0xd00000>; + }; + partition@f00000 { + label = "Boot_2nd"; + reg = <0xf00000 0x100000>; + }; + }; + }; +}; + /* CON4 on CP1 expansion */ &cps_sata0 { status = "okay"; @@ -244,6 +296,11 @@ status = "okay"; }; +&cps_eth0 { + status = "okay"; + phy-mode = "10gbase-kr"; +}; + &cps_eth1 { status = "okay"; phy = <&phy0>; diff --git a/arch/arm64/boot/dts/marvell/armada-8040-mcbin.dts b/arch/arm64/boot/dts/marvell/armada-8040-mcbin.dts index acf5c7d16d79..b3350827ee55 100644 --- a/arch/arm64/boot/dts/marvell/armada-8040-mcbin.dts +++ b/arch/arm64/boot/dts/marvell/armada-8040-mcbin.dts @@ -57,7 +57,7 @@ stdout-path = "serial0:115200n8"; }; - memory@00000000 { + memory@0 { device_type = "memory"; reg = <0x0 0x0 0x0 0x80000000>; }; @@ -101,6 +101,8 @@ &uart0 { status = "okay"; + pinctrl-0 = <&uart0_pins>; + pinctrl-names = "default"; }; &ap_sdhci0 { @@ -222,8 +224,11 @@ &cpm_eth0 { status = "okay"; + /* Network PHY */ phy = <&phy0>; phy-mode = "10gbase-kr"; + /* Generic PHY, providing serdes lanes */ + phys = <&cpm_comphy4 0>; }; &cpm_sata0 { @@ -257,15 +262,21 @@ &cps_eth0 { status = "okay"; + /* Network PHY */ phy = <&phy8>; phy-mode = "10gbase-kr"; + /* Generic PHY, providing serdes lanes */ + phys = <&cps_comphy4 0>; }; &cps_eth1 { /* CPS Lane 0 - J5 (Gigabit RJ45) */ status = "okay"; + /* Network PHY */ phy = <&ge_phy>; phy-mode = "sgmii"; + /* Generic PHY, providing serdes lanes */ + phys = <&cps_comphy0 1>; }; &cps_pinctrl { diff --git a/arch/arm64/boot/dts/marvell/armada-8080-db.dts b/arch/arm64/boot/dts/marvell/armada-8080-db.dts index 707af833832b..85b58a19a9fb 100644 --- a/arch/arm64/boot/dts/marvell/armada-8080-db.dts +++ b/arch/arm64/boot/dts/marvell/armada-8080-db.dts @@ -55,7 +55,7 @@ stdout-path = "serial0:115200n8"; }; - memory@00000000 { + memory@0 { device_type = "memory"; reg = <0x0 0x0 0x0 0x80000000>; }; diff --git a/arch/arm64/boot/dts/marvell/armada-ap806-dual.dtsi b/arch/arm64/boot/dts/marvell/armada-ap806-dual.dtsi index 95a1ff60f6c1..b98ea137371d 100644 --- a/arch/arm64/boot/dts/marvell/armada-ap806-dual.dtsi +++ b/arch/arm64/boot/dts/marvell/armada-ap806-dual.dtsi @@ -54,13 +54,13 @@ #address-cells = <1>; #size-cells = <0>; - cpu@000 { + cpu@0 { device_type = "cpu"; compatible = "arm,cortex-a72", "arm,armv8"; reg = <0x000>; enable-method = "psci"; }; - cpu@001 { + cpu@1 { device_type = "cpu"; compatible = "arm,cortex-a72", "arm,armv8"; reg = <0x001>; diff --git a/arch/arm64/boot/dts/marvell/armada-ap806-quad.dtsi b/arch/arm64/boot/dts/marvell/armada-ap806-quad.dtsi index ba43a4357b89..116164ff260f 100644 --- a/arch/arm64/boot/dts/marvell/armada-ap806-quad.dtsi +++ b/arch/arm64/boot/dts/marvell/armada-ap806-quad.dtsi @@ -54,13 +54,13 @@ #address-cells = <1>; #size-cells = <0>; - cpu@000 { + cpu@0 { device_type = "cpu"; compatible = "arm,cortex-a72", "arm,armv8"; reg = <0x000>; enable-method = "psci"; }; - cpu@001 { + cpu@1 { device_type = "cpu"; compatible = "arm,cortex-a72", "arm,armv8"; reg = <0x001>; diff --git a/arch/arm64/boot/dts/marvell/armada-ap806.dtsi b/arch/arm64/boot/dts/marvell/armada-ap806.dtsi index 30d48ecf46e0..1c4dd8ab9ad5 100644 --- a/arch/arm64/boot/dts/marvell/armada-ap806.dtsi +++ b/arch/arm64/boot/dts/marvell/armada-ap806.dtsi @@ -241,6 +241,12 @@ }; + watchdog: watchdog@600000 { + compatible = "arm,sbsa-gwdt"; + reg = <0x610000 0x1000>, <0x600000 0x1000>; + interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>; + }; + ap_sdhci0: sdhci@6e0000 { compatible = "marvell,armada-ap806-sdhci"; reg = <0x6e0000 0x300>; @@ -263,6 +269,11 @@ ap_pinctrl: pinctrl { compatible = "marvell,ap806-pinctrl"; + + uart0_pins: uart0-pins { + marvell,pins = "mpp11", "mpp19"; + marvell,function = "uart0"; + }; }; ap_gpio: gpio@1040 { diff --git a/arch/arm64/boot/dts/marvell/armada-ap810-ap0-octa-core.dtsi b/arch/arm64/boot/dts/marvell/armada-ap810-ap0-octa-core.dtsi index bf1b22b70384..7f0661e12f5e 100644 --- a/arch/arm64/boot/dts/marvell/armada-ap810-ap0-octa-core.dtsi +++ b/arch/arm64/boot/dts/marvell/armada-ap810-ap0-octa-core.dtsi @@ -52,13 +52,13 @@ #size-cells = <0>; compatible = "marvell,armada-ap810-octa"; - cpu@000 { + cpu@0 { device_type = "cpu"; compatible = "arm,cortex-a72", "arm,armv8"; reg = <0x000>; enable-method = "psci"; }; - cpu@001 { + cpu@1 { device_type = "cpu"; compatible = "arm,cortex-a72", "arm,armv8"; reg = <0x001>; diff --git a/arch/arm64/boot/dts/marvell/armada-cp110-master.dtsi b/arch/arm64/boot/dts/marvell/armada-cp110-master.dtsi index f2aa2a81de4d..e3b64d03fbd8 100644 --- a/arch/arm64/boot/dts/marvell/armada-cp110-master.dtsi +++ b/arch/arm64/boot/dts/marvell/armada-cp110-master.dtsi @@ -74,9 +74,10 @@ <ICU_GRP_NSR 43 IRQ_TYPE_LEVEL_HIGH>, <ICU_GRP_NSR 47 IRQ_TYPE_LEVEL_HIGH>, <ICU_GRP_NSR 51 IRQ_TYPE_LEVEL_HIGH>, - <ICU_GRP_NSR 55 IRQ_TYPE_LEVEL_HIGH>; + <ICU_GRP_NSR 55 IRQ_TYPE_LEVEL_HIGH>, + <ICU_GRP_NSR 129 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "tx-cpu0", "tx-cpu1", "tx-cpu2", - "tx-cpu3", "rx-shared"; + "tx-cpu3", "rx-shared", "link"; port-id = <0>; gop-port-id = <0>; status = "disabled"; @@ -87,9 +88,10 @@ <ICU_GRP_NSR 44 IRQ_TYPE_LEVEL_HIGH>, <ICU_GRP_NSR 48 IRQ_TYPE_LEVEL_HIGH>, <ICU_GRP_NSR 52 IRQ_TYPE_LEVEL_HIGH>, - <ICU_GRP_NSR 56 IRQ_TYPE_LEVEL_HIGH>; + <ICU_GRP_NSR 56 IRQ_TYPE_LEVEL_HIGH>, + <ICU_GRP_NSR 128 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "tx-cpu0", "tx-cpu1", "tx-cpu2", - "tx-cpu3", "rx-shared"; + "tx-cpu3", "rx-shared", "link"; port-id = <1>; gop-port-id = <2>; status = "disabled"; @@ -100,15 +102,54 @@ <ICU_GRP_NSR 45 IRQ_TYPE_LEVEL_HIGH>, <ICU_GRP_NSR 49 IRQ_TYPE_LEVEL_HIGH>, <ICU_GRP_NSR 53 IRQ_TYPE_LEVEL_HIGH>, - <ICU_GRP_NSR 57 IRQ_TYPE_LEVEL_HIGH>; + <ICU_GRP_NSR 57 IRQ_TYPE_LEVEL_HIGH>, + <ICU_GRP_NSR 127 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "tx-cpu0", "tx-cpu1", "tx-cpu2", - "tx-cpu3", "rx-shared"; + "tx-cpu3", "rx-shared", "link"; port-id = <2>; gop-port-id = <3>; status = "disabled"; }; }; + cpm_comphy: phy@120000 { + compatible = "marvell,comphy-cp110"; + reg = <0x120000 0x6000>; + marvell,system-controller = <&cpm_syscon0>; + #address-cells = <1>; + #size-cells = <0>; + + cpm_comphy0: phy@0 { + reg = <0>; + #phy-cells = <1>; + }; + + cpm_comphy1: phy@1 { + reg = <1>; + #phy-cells = <1>; + }; + + cpm_comphy2: phy@2 { + reg = <2>; + #phy-cells = <1>; + }; + + cpm_comphy3: phy@3 { + reg = <3>; + #phy-cells = <1>; + }; + + cpm_comphy4: phy@4 { + reg = <4>; + #phy-cells = <1>; + }; + + cpm_comphy5: phy@5 { + reg = <5>; + #phy-cells = <1>; + }; + }; + cpm_mdio: mdio@12a200 { #address-cells = <1>; #size-cells = <0>; @@ -143,7 +184,7 @@ cpm_syscon0: system-controller@440000 { compatible = "syscon", "simple-mfd"; - reg = <0x440000 0x1000>; + reg = <0x440000 0x2000>; cpm_clk: clock { compatible = "marvell,cp110-clock"; @@ -274,12 +315,14 @@ * this controller is only usable on the CPM * for A7K and on the CPS for A8K. */ - compatible = "marvell,armada370-nand"; + compatible = "marvell,armada-8k-nand", + "marvell,armada370-nand"; reg = <0x720000 0x54>; #address-cells = <1>; #size-cells = <1>; interrupts = <ICU_GRP_NSR 115 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cpm_clk 1 2>; + marvell,system-controller = <&cpm_syscon0>; status = "disabled"; }; diff --git a/arch/arm64/boot/dts/marvell/armada-cp110-slave.dtsi b/arch/arm64/boot/dts/marvell/armada-cp110-slave.dtsi index 4fe70323abb3..0d51096c69f8 100644 --- a/arch/arm64/boot/dts/marvell/armada-cp110-slave.dtsi +++ b/arch/arm64/boot/dts/marvell/armada-cp110-slave.dtsi @@ -74,9 +74,10 @@ <ICU_GRP_NSR 43 IRQ_TYPE_LEVEL_HIGH>, <ICU_GRP_NSR 47 IRQ_TYPE_LEVEL_HIGH>, <ICU_GRP_NSR 51 IRQ_TYPE_LEVEL_HIGH>, - <ICU_GRP_NSR 55 IRQ_TYPE_LEVEL_HIGH>; + <ICU_GRP_NSR 55 IRQ_TYPE_LEVEL_HIGH>, + <ICU_GRP_NSR 129 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "tx-cpu0", "tx-cpu1", "tx-cpu2", - "tx-cpu3", "rx-shared"; + "tx-cpu3", "rx-shared", "link"; port-id = <0>; gop-port-id = <0>; status = "disabled"; @@ -87,9 +88,10 @@ <ICU_GRP_NSR 44 IRQ_TYPE_LEVEL_HIGH>, <ICU_GRP_NSR 48 IRQ_TYPE_LEVEL_HIGH>, <ICU_GRP_NSR 52 IRQ_TYPE_LEVEL_HIGH>, - <ICU_GRP_NSR 56 IRQ_TYPE_LEVEL_HIGH>; + <ICU_GRP_NSR 56 IRQ_TYPE_LEVEL_HIGH>, + <ICU_GRP_NSR 128 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "tx-cpu0", "tx-cpu1", "tx-cpu2", - "tx-cpu3", "rx-shared"; + "tx-cpu3", "rx-shared", "link"; port-id = <1>; gop-port-id = <2>; status = "disabled"; @@ -100,15 +102,54 @@ <ICU_GRP_NSR 45 IRQ_TYPE_LEVEL_HIGH>, <ICU_GRP_NSR 49 IRQ_TYPE_LEVEL_HIGH>, <ICU_GRP_NSR 53 IRQ_TYPE_LEVEL_HIGH>, - <ICU_GRP_NSR 57 IRQ_TYPE_LEVEL_HIGH>; + <ICU_GRP_NSR 57 IRQ_TYPE_LEVEL_HIGH>, + <ICU_GRP_NSR 127 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "tx-cpu0", "tx-cpu1", "tx-cpu2", - "tx-cpu3", "rx-shared"; + "tx-cpu3", "rx-shared", "link"; port-id = <2>; gop-port-id = <3>; status = "disabled"; }; }; + cps_comphy: phy@120000 { + compatible = "marvell,comphy-cp110"; + reg = <0x120000 0x6000>; + marvell,system-controller = <&cps_syscon0>; + #address-cells = <1>; + #size-cells = <0>; + + cps_comphy0: phy@0 { + reg = <0>; + #phy-cells = <1>; + }; + + cps_comphy1: phy@1 { + reg = <1>; + #phy-cells = <1>; + }; + + cps_comphy2: phy@2 { + reg = <2>; + #phy-cells = <1>; + }; + + cps_comphy3: phy@3 { + reg = <3>; + #phy-cells = <1>; + }; + + cps_comphy4: phy@4 { + reg = <4>; + #phy-cells = <1>; + }; + + cps_comphy5: phy@5 { + reg = <5>; + #phy-cells = <1>; + }; + }; + cps_mdio: mdio@12a200 { #address-cells = <1>; #size-cells = <0>; @@ -143,7 +184,7 @@ cps_syscon0: system-controller@440000 { compatible = "syscon", "simple-mfd"; - reg = <0x440000 0x1000>; + reg = <0x440000 0x2000>; cps_clk: clock { compatible = "marvell,cp110-clock"; @@ -275,7 +316,8 @@ * this controller is only usable on the CPM * for A7K and on the CPS for A8K. */ - compatible = "marvell,armada370-nand"; + compatible = "marvell,armada370-nand", + "marvell,armada370-nand"; reg = <0x720000 0x54>; #address-cells = <1>; #size-cells = <1>; diff --git a/arch/arm64/boot/dts/marvell/berlin4ct.dtsi b/arch/arm64/boot/dts/marvell/berlin4ct.dtsi index d6b800fd26d0..d2f88b92d8e2 100644 --- a/arch/arm64/boot/dts/marvell/berlin4ct.dtsi +++ b/arch/arm64/boot/dts/marvell/berlin4ct.dtsi @@ -167,7 +167,7 @@ ranges = <0 0xe80000 0x10000>; interrupt-parent = <&aic>; - gpio0: gpio@0400 { + gpio0: gpio@400 { compatible = "snps,dw-apb-gpio"; reg = <0x0400 0x400>; #address-cells = <1>; @@ -185,7 +185,7 @@ }; }; - gpio1: gpio@0800 { + gpio1: gpio@800 { compatible = "snps,dw-apb-gpio"; reg = <0x0800 0x400>; #address-cells = <1>; @@ -203,7 +203,7 @@ }; }; - gpio2: gpio@0c00 { + gpio2: gpio@c00 { compatible = "snps,dw-apb-gpio"; reg = <0x0c00 0x400>; #address-cells = <1>; diff --git a/arch/arm64/boot/dts/mediatek/mt2712e.dtsi b/arch/arm64/boot/dts/mediatek/mt2712e.dtsi index 57d0396b7faa..5d4e406bb35d 100644 --- a/arch/arm64/boot/dts/mediatek/mt2712e.dtsi +++ b/arch/arm64/boot/dts/mediatek/mt2712e.dtsi @@ -39,6 +39,7 @@ device_type = "cpu"; compatible = "arm,cortex-a35"; reg = <0x000>; + cpu-idle-states = <&CPU_SLEEP_0 &CLUSTER_SLEEP_0>; }; cpu1: cpu@1 { @@ -46,6 +47,7 @@ compatible = "arm,cortex-a35"; reg = <0x001>; enable-method = "psci"; + cpu-idle-states = <&CPU_SLEEP_0 &CLUSTER_SLEEP_0>; }; cpu2: cpu@200 { @@ -53,6 +55,29 @@ compatible = "arm,cortex-a72"; reg = <0x200>; enable-method = "psci"; + cpu-idle-states = <&CPU_SLEEP_0 &CLUSTER_SLEEP_0>; + }; + + idle-states { + entry-method = "arm,psci"; + + CPU_SLEEP_0: cpu-sleep-0 { + compatible = "arm,idle-state"; + local-timer-stop; + entry-latency-us = <100>; + exit-latency-us = <80>; + min-residency-us = <2000>; + arm,psci-suspend-param = <0x0010000>; + }; + + CLUSTER_SLEEP_0: cluster-sleep-0 { + compatible = "arm,idle-state"; + local-timer-stop; + entry-latency-us = <350>; + exit-latency-us = <80>; + min-residency-us = <3000>; + arm,psci-suspend-param = <0x1010000>; + }; }; }; diff --git a/arch/arm64/boot/dts/nvidia/tegra186-p2771-0000.dts b/arch/arm64/boot/dts/nvidia/tegra186-p2771-0000.dts index c71d762bf697..42a23997dcdb 100644 --- a/arch/arm64/boot/dts/nvidia/tegra186-p2771-0000.dts +++ b/arch/arm64/boot/dts/nvidia/tegra186-p2771-0000.dts @@ -50,6 +50,30 @@ vmmc-supply = <&vdd_sd>; }; + pcie@10003000 { + status = "okay"; + + dvdd-pex-supply = <&vdd_pex>; + hvdd-pex-pll-supply = <&vdd_1v8>; + hvdd-pex-supply = <&vdd_1v8>; + vddio-pexctl-aud-supply = <&vdd_1v8>; + + pci@1,0 { + nvidia,num-lanes = <4>; + status = "okay"; + }; + + pci@2,0 { + nvidia,num-lanes = <0>; + status = "disabled"; + }; + + pci@3,0 { + nvidia,num-lanes = <1>; + status = "disabled"; + }; + }; + gpio-keys { compatible = "gpio-keys"; diff --git a/arch/arm64/boot/dts/nvidia/tegra186.dtsi b/arch/arm64/boot/dts/nvidia/tegra186.dtsi index a9c3eef6c4e0..46d1f287fb0f 100644 --- a/arch/arm64/boot/dts/nvidia/tegra186.dtsi +++ b/arch/arm64/boot/dts/nvidia/tegra186.dtsi @@ -5,6 +5,7 @@ #include <dt-bindings/mailbox/tegra186-hsp.h> #include <dt-bindings/power/tegra186-powergate.h> #include <dt-bindings/reset/tegra186-reset.h> +#include <dt-bindings/thermal/tegra186-bpmp-thermal.h> / { compatible = "nvidia,tegra186"; @@ -356,6 +357,116 @@ nvidia,bpmp = <&bpmp>; }; + pcie@10003000 { + compatible = "nvidia,tegra186-pcie"; + power-domains = <&bpmp TEGRA186_POWER_DOMAIN_PCX>; + device_type = "pci"; + reg = <0x0 0x10003000 0x0 0x00000800 /* PADS registers */ + 0x0 0x10003800 0x0 0x00000800 /* AFI registers */ + 0x0 0x40000000 0x0 0x10000000>; /* configuration space */ + reg-names = "pads", "afi", "cs"; + + interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>, /* controller interrupt */ + <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>; /* MSI interrupt */ + interrupt-names = "intr", "msi"; + + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 0 0>; + interrupt-map = <0 0 0 0 &gic GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>; + + bus-range = <0x00 0xff>; + #address-cells = <3>; + #size-cells = <2>; + + ranges = <0x82000000 0 0x10000000 0x0 0x10000000 0 0x00001000 /* port 0 configuration space */ + 0x82000000 0 0x10001000 0x0 0x10001000 0 0x00001000 /* port 1 configuration space */ + 0x82000000 0 0x10004000 0x0 0x10004000 0 0x00001000 /* port 2 configuration space */ + 0x81000000 0 0x0 0x0 0x50000000 0 0x00010000 /* downstream I/O (64 KiB) */ + 0x82000000 0 0x50100000 0x0 0x50100000 0 0x07F00000 /* non-prefetchable memory (127 MiB) */ + 0xc2000000 0 0x58000000 0x0 0x58000000 0 0x28000000>; /* prefetchable memory (640 MiB) */ + + clocks = <&bpmp TEGRA186_CLK_AFI>, + <&bpmp TEGRA186_CLK_PCIE>, + <&bpmp TEGRA186_CLK_PLLE>; + clock-names = "afi", "pex", "pll_e"; + + resets = <&bpmp TEGRA186_RESET_AFI>, + <&bpmp TEGRA186_RESET_PCIE>, + <&bpmp TEGRA186_RESET_PCIEXCLK>; + reset-names = "afi", "pex", "pcie_x"; + + status = "disabled"; + + pci@1,0 { + device_type = "pci"; + assigned-addresses = <0x82000800 0 0x10000000 0 0x1000>; + reg = <0x000800 0 0 0 0>; + status = "disabled"; + + #address-cells = <3>; + #size-cells = <2>; + ranges; + + nvidia,num-lanes = <2>; + }; + + pci@2,0 { + device_type = "pci"; + assigned-addresses = <0x82001000 0 0x10001000 0 0x1000>; + reg = <0x001000 0 0 0 0>; + status = "disabled"; + + #address-cells = <3>; + #size-cells = <2>; + ranges; + + nvidia,num-lanes = <1>; + }; + + pci@3,0 { + device_type = "pci"; + assigned-addresses = <0x82001800 0 0x10004000 0 0x1000>; + reg = <0x001800 0 0 0 0>; + status = "disabled"; + + #address-cells = <3>; + #size-cells = <2>; + ranges; + + nvidia,num-lanes = <1>; + }; + }; + + host1x@13e00000 { + compatible = "nvidia,tegra186-host1x", "simple-bus"; + reg = <0x0 0x13e00000 0x0 0x10000>, + <0x0 0x13e10000 0x0 0x10000>; + reg-names = "hypervisor", "vm"; + interrupts = <GIC_SPI 265 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 263 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&bpmp TEGRA186_CLK_HOST1X>; + clock-names = "host1x"; + resets = <&bpmp TEGRA186_RESET_HOST1X>; + reset-names = "host1x"; + + #address-cells = <1>; + #size-cells = <1>; + + ranges = <0x15000000 0x0 0x15000000 0x01000000>; + + vic@15340000 { + compatible = "nvidia,tegra186-vic"; + reg = <0x15340000 0x40000>; + interrupts = <GIC_SPI 206 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&bpmp TEGRA186_CLK_VIC>; + clock-names = "vic"; + resets = <&bpmp TEGRA186_RESET_VIC>; + reset-names = "vic"; + + power-domains = <&bpmp TEGRA186_POWER_DOMAIN_VIC>; + }; + }; + gpu@17000000 { compatible = "nvidia,gp10b"; reg = <0x0 0x17000000 0x0 0x1000000>, @@ -444,6 +555,7 @@ shmem = <&cpu_bpmp_tx &cpu_bpmp_rx>; #clock-cells = <1>; #reset-cells = <1>; + #power-domain-cells = <1>; bpmp_i2c: i2c { compatible = "nvidia,tegra186-bpmp-i2c"; @@ -452,6 +564,108 @@ #size-cells = <0>; status = "disabled"; }; + + bpmp_thermal: thermal { + compatible = "nvidia,tegra186-bpmp-thermal"; + #thermal-sensor-cells = <1>; + }; + }; + + thermal-zones { + a57 { + polling-delay = <0>; + polling-delay-passive = <1000>; + + thermal-sensors = + <&bpmp_thermal TEGRA186_BPMP_THERMAL_ZONE_CPU>; + + trips { + critical { + temperature = <101000>; + hysteresis = <0>; + type = "critical"; + }; + }; + + cooling-maps { + }; + }; + + denver { + polling-delay = <0>; + polling-delay-passive = <1000>; + + thermal-sensors = + <&bpmp_thermal TEGRA186_BPMP_THERMAL_ZONE_AUX>; + + trips { + critical { + temperature = <101000>; + hysteresis = <0>; + type = "critical"; + }; + }; + + cooling-maps { + }; + }; + + gpu { + polling-delay = <0>; + polling-delay-passive = <1000>; + + thermal-sensors = + <&bpmp_thermal TEGRA186_BPMP_THERMAL_ZONE_GPU>; + + trips { + critical { + temperature = <101000>; + hysteresis = <0>; + type = "critical"; + }; + }; + + cooling-maps { + }; + }; + + pll { + polling-delay = <0>; + polling-delay-passive = <1000>; + + thermal-sensors = + <&bpmp_thermal TEGRA186_BPMP_THERMAL_ZONE_PLLX>; + + trips { + critical { + temperature = <101000>; + hysteresis = <0>; + type = "critical"; + }; + }; + + cooling-maps { + }; + }; + + always_on { + polling-delay = <0>; + polling-delay-passive = <1000>; + + thermal-sensors = + <&bpmp_thermal TEGRA186_BPMP_THERMAL_ZONE_AO>; + + trips { + critical { + temperature = <101000>; + hysteresis = <0>; + type = "critical"; + }; + }; + + cooling-maps { + }; + }; }; timer { diff --git a/arch/arm64/boot/dts/qcom/apq8016-sbc.dtsi b/arch/arm64/boot/dts/qcom/apq8016-sbc.dtsi index 1d63e6b879de..33a3297eb284 100644 --- a/arch/arm64/boot/dts/qcom/apq8016-sbc.dtsi +++ b/arch/arm64/boot/dts/qcom/apq8016-sbc.dtsi @@ -19,6 +19,30 @@ #include <dt-bindings/input/input.h> #include <dt-bindings/sound/apq8016-lpass.h> +/* + * GPIO name legend: proper name = the GPIO line is used as GPIO + * NC = not connected (pin out but not routed from the chip to + * anything the board) + * "[PER]" = pin is muxed for [peripheral] (not GPIO) + * LSEC = Low Speed External Connector + * HSEC = High Speed External Connector + * + * Line names are taken from the schematic "DragonBoard410c" + * dated monday, august 31, 2015. Page 5 in particular. + * + * For the lines routed to the external connectors the + * lines are named after the 96Boards CE Specification 1.0, + * Appendix "Expansion Connector Signal Description". + * + * When the 96Board naming of a line and the schematic name of + * the same line are in conflict, the 96Board specification + * takes precedence, which means that the external UART on the + * LSEC is named UART0 while the schematic and SoC names this + * UART3. This is only for the informational lines i.e. "[FOO]", + * the GPIO named lines "GPIO-A" thru "GPIO-L" are the only + * ones actually used for GPIO. + */ + / { aliases { serial0 = &blsp1_uart2; @@ -47,6 +71,132 @@ }; soc { + pinctrl@1000000 { + gpio-line-names = + "[UART0_TX]", /* GPIO_0, LSEC pin 5 */ + "[UART0_RX]", /* GPIO_1, LSEC pin 7 */ + "[UART0_CTS_N]", /* GPIO_2, LSEC pin 3 */ + "[UART0_RTS_N]", /* GPIO_3, LSEC pin 9 */ + "[UART1_TX]", /* GPIO_4, LSEC pin 11 */ + "[UART1_RX]", /* GPIO_5, LSEC pin 13 */ + "[I2C0_SDA]", /* GPIO_8, LSEC pin 17 */ + "[I2C0_SCL]", /* GPIO_7, LSEC pin 15 */ + "[SPI1_DOUT]", /* SPI1_MOSI, HSEC pin 1 */ + "[SPI1_DIN]", /* SPI1_MISO, HSEC pin 11 */ + "[SPI1_CS]", /* SPI1_CS_N, HSEC pin 7 */ + "[SPI1_SCLK]", /* SPI1_CLK, HSEC pin 9 */ + "GPIO-B", /* LS_EXP_GPIO_B, LSEC pin 24 */ + "GPIO-C", /* LS_EXP_GPIO_C, LSEC pin 25 */ + "[I2C3_SDA]", /* HSEC pin 38 */ + "[I2C3_SCL]", /* HSEC pin 36 */ + "[SPI0_MOSI]", /* LSEC pin 14 */ + "[SPI0_MISO]", /* LSEC pin 10 */ + "[SPI0_CS_N]", /* LSEC pin 12 */ + "[SPI0_CLK]", /* LSEC pin 8 */ + "HDMI_HPD_N", /* GPIO 20 */ + "USR_LED_1_CTRL", + "[I2C1_SDA]", /* GPIO_22, LSEC pin 21 */ + "[I2C1_SCL]", /* GPIO_23, LSEC pin 19 */ + "GPIO-G", /* LS_EXP_GPIO_G, LSEC pin 29 */ + "GPIO-H", /* LS_EXP_GPIO_H, LSEC pin 30 */ + "[CSI0_MCLK]", /* HSEC pin 15 */ + "[CSI1_MCLK]", /* HSEC pin 17 */ + "GPIO-K", /* LS_EXP_GPIO_K, LSEC pin 33 */ + "[I2C2_SDA]", /* HSEC pin 34 */ + "[I2C2_SCL]", /* HSEC pin 32 */ + "DSI2HDMI_INT_N", + "DSI_SW_SEL_APQ", + "GPIO-L", /* LS_EXP_GPIO_L, LSEC pin 34 */ + "GPIO-J", /* LS_EXP_GPIO_J, LSEC pin 32 */ + "GPIO-I", /* LS_EXP_GPIO_I, LSEC pin 31 */ + "GPIO-A", /* LS_EXP_GPIO_A, LSEC pin 23 */ + "FORCED_USB_BOOT", + "SD_CARD_DET_N", + "[WCSS_BT_SSBI]", + "[WCSS_WLAN_DATA_2]", /* GPIO 40 */ + "[WCSS_WLAN_DATA_1]", + "[WCSS_WLAN_DATA_0]", + "[WCSS_WLAN_SET]", + "[WCSS_WLAN_CLK]", + "[WCSS_FM_SSBI]", + "[WCSS_FM_SDI]", + "[WCSS_BT_DAT_CTL]", + "[WCSS_BT_DAT_STB]", + "NC", + "NC", /* GPIO 50 */ + "NC", + "NC", + "NC", + "NC", + "NC", + "NC", + "NC", + "NC", + "NC", + "NC", /* GPIO 60 */ + "NC", + "NC", + "[CDC_PDM0_CLK]", + "[CDC_PDM0_SYNC]", + "[CDC_PDM0_TX0]", + "[CDC_PDM0_RX0]", + "[CDC_PDM0_RX1]", + "[CDC_PDM0_RX2]", + "GPIO-D", /* LS_EXP_GPIO_D, LSEC pin 26 */ + "NC", /* GPIO 70 */ + "NC", + "NC", + "NC", + "NC", /* GPIO 74 */ + "NC", + "NC", + "NC", + "NC", + "NC", + "BOOT_CONFIG_0", /* GPIO 80 */ + "BOOT_CONFIG_1", + "BOOT_CONFIG_2", + "BOOT_CONFIG_3", + "NC", + "NC", + "BOOT_CONFIG_5", + "NC", + "NC", + "NC", + "NC", /* GPIO 90 */ + "NC", + "NC", + "NC", + "NC", + "NC", + "NC", + "NC", + "NC", + "NC", + "NC", /* GPIO 100 */ + "NC", + "NC", + "NC", + "SSBI_GPS", + "NC", + "NC", + "KEY_VOLP_N", + "NC", + "NC", + "[LS_EXP_MI2S_WS]", /* GPIO 110 */ + "NC", + "NC", + "[LS_EXP_MI2S_SCK]", + "[LS_EXP_MI2S_DATA0]", + "GPIO-E", /* LS_EXP_GPIO_E, LSEC pin 27 */ + "NC", + "[DSI2HDMI_MI2S_WS]", + "[DSI2HDMI_MI2S_SCK]", + "[DSI2HDMI_MI2S_DATA0]", + "USR_LED_2_CTRL", /* GPIO 120 */ + "SB_HS_ID"; + }; + dma@7884000 { status = "okay"; }; @@ -192,7 +342,7 @@ }; }; - sdhci@07824000 { + sdhci@7824000 { vmmc-supply = <&pm8916_l8>; vqmmc-supply = <&pm8916_l5>; @@ -202,7 +352,7 @@ status = "okay"; }; - sdhci@07864000 { + sdhci@7864000 { vmmc-supply = <&pm8916_l11>; vqmmc-supply = <&pm8916_l12>; @@ -232,7 +382,7 @@ }; }; - lpass@07708000 { + lpass@7708000 { status = "okay"; }; @@ -329,6 +479,25 @@ }; }; + spmi@200f000 { + pm8916@0 { + gpios@c000 { + gpio-line-names = + "USR_LED_3_CTRL", + "USR_LED_4_CTRL", + "USB_HUB_RESET_N_PM", + "USB_SW_SEL_PM"; + }; + mpps@a000 { + gpio-line-names = + "VDD_PX_BIAS", + "WLAN_LED_CTRL", + "BT_LED_CTRL", + "GPIO-F"; /* LS_EXP_GPIO_F, LSEC pin 28 */ + }; + }; + }; + wcnss@a21b000 { status = "okay"; }; @@ -379,6 +548,8 @@ status = "okay"; clocks = <&gcc GCC_CODEC_DIGCODEC_CLK>; clock-names = "mclk"; + qcom,mbhc-vthreshold-low = <75 150 237 450 500>; + qcom,mbhc-vthreshold-high = <75 150 237 450 500>; }; &smd_rpm_regulators { diff --git a/arch/arm64/boot/dts/qcom/apq8096-db820c.dtsi b/arch/arm64/boot/dts/qcom/apq8096-db820c.dtsi index 789f3e87321e..492a011f14f6 100644 --- a/arch/arm64/boot/dts/qcom/apq8096-db820c.dtsi +++ b/arch/arm64/boot/dts/qcom/apq8096-db820c.dtsi @@ -51,31 +51,31 @@ pinctrl-1 = <&blsp2_uart2_4pins_sleep>; }; - i2c@07577000 { + i2c@7577000 { /* On Low speed expansion */ label = "LS-I2C0"; status = "okay"; }; - i2c@075b6000 { + i2c@75b6000 { /* On Low speed expansion */ label = "LS-I2C1"; status = "okay"; }; - spi@07575000 { + spi@7575000 { /* On Low speed expansion */ label = "LS-SPI0"; status = "okay"; }; - i2c@075b5000 { + i2c@75b5000 { /* On High speed expansion */ label = "HS-I2C2"; status = "okay"; }; - spi@075ba000{ + spi@75ba000{ /* On High speed expansion */ label = "HS-SPI1"; status = "okay"; @@ -138,6 +138,22 @@ pinctrl-names = "default"; pinctrl-0 = <&usb2_vbus_det_gpio>; }; + + agnoc@0 { + qcom,pcie@00600000 { + perst-gpio = <&msmgpio 35 GPIO_ACTIVE_LOW>; + }; + + qcom,pcie@00608000 { + status = "okay"; + perst-gpio = <&msmgpio 130 GPIO_ACTIVE_LOW>; + }; + + qcom,pcie@00610000 { + status = "okay"; + perst-gpio = <&msmgpio 114 GPIO_ACTIVE_LOW>; + }; + }; }; @@ -173,9 +189,15 @@ regulator-min-microvolt = <1300000>; regulator-max-microvolt = <1300000>; }; + + /** + * 1.8v required on LS expansion + * for mezzanine boards + */ s4 { regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; + regulator-always-on; }; s5 { regulator-min-microvolt = <2150000>; diff --git a/arch/arm64/boot/dts/qcom/msm8916.dtsi b/arch/arm64/boot/dts/qcom/msm8916.dtsi index dc3817593e14..6b2127a6ced1 100644 --- a/arch/arm64/boot/dts/qcom/msm8916.dtsi +++ b/arch/arm64/boot/dts/qcom/msm8916.dtsi @@ -69,8 +69,11 @@ }; rmtfs@86700000 { + compatible = "qcom,rmtfs-mem"; reg = <0x0 0x86700000 0x0 0xe0000>; no-map; + + qcom,client-id = <1>; }; rfsa@867e00000 { @@ -257,6 +260,8 @@ clocks = <&gcc GCC_CRYPTO_CLK>, <&gcc GCC_CRYPTO_AXI_CLK>, <&gcc GCC_CRYPTO_AHB_CLK>; clock-names = "core", "bus", "iface"; #reset-cells = <1>; + + qcom,dload-mode = <&tcsr 0x6100>; }; }; @@ -495,7 +500,7 @@ status = "disabled"; }; - lpass: lpass@07708000 { + lpass: lpass@7708000 { status = "disabled"; compatible = "qcom,lpass-cpu-apq8016"; clocks = <&gcc GCC_ULTAUDIO_AHBFABRIC_IXFABRIC_CLK>, @@ -530,7 +535,7 @@ #sound-dai-cells = <1>; }; - sdhc_1: sdhci@07824000 { + sdhc_1: sdhci@7824000 { compatible = "qcom,sdhci-msm-v4"; reg = <0x07824900 0x11c>, <0x07824000 0x800>; reg-names = "hc_mem", "core_mem"; @@ -547,7 +552,7 @@ status = "disabled"; }; - sdhc_2: sdhci@07864000 { + sdhc_2: sdhci@7864000 { compatible = "qcom,sdhci-msm-v4"; reg = <0x07864900 0x11c>, <0x07864000 0x800>; reg-names = "hc_mem", "core_mem"; @@ -814,7 +819,7 @@ mdp: mdp@1a01000 { compatible = "qcom,mdp5"; - reg = <0x1a01000 0x90000>; + reg = <0x1a01000 0x89000>; reg-names = "mdp_phys"; interrupt-parent = <&mdss>; diff --git a/arch/arm64/boot/dts/qcom/msm8996-pins.dtsi b/arch/arm64/boot/dts/qcom/msm8996-pins.dtsi index 659940434842..c5c42e94f387 100644 --- a/arch/arm64/boot/dts/qcom/msm8996-pins.dtsi +++ b/arch/arm64/boot/dts/qcom/msm8996-pins.dtsi @@ -300,4 +300,199 @@ drive-strength = <2>; /* 2 MA */ }; }; + + pcie0_clkreq_default: pcie0_clkreq_default { + mux { + pins = "gpio36"; + function = "pci_e0"; + }; + + config { + pins = "gpio36"; + drive-strength = <2>; + bias-pull-up; + }; + }; + + pcie0_perst_default: pcie0_perst_default { + mux { + pins = "gpio35"; + function = "gpio"; + }; + + config { + pins = "gpio35"; + drive-strength = <2>; + bias-pull-down; + }; + }; + + pcie0_wake_default: pcie0_wake_default { + mux { + pins = "gpio37"; + function = "gpio"; + }; + + config { + pins = "gpio37"; + drive-strength = <2>; + bias-pull-up; + }; + }; + + pcie0_clkreq_sleep: pcie0_clkreq_sleep { + mux { + pins = "gpio36"; + function = "gpio"; + }; + + config { + pins = "gpio36"; + drive-strength = <2>; + bias-disable; + }; + }; + + pcie0_wake_sleep: pcie0_wake_sleep { + mux { + pins = "gpio37"; + function = "gpio"; + }; + + config { + pins = "gpio37"; + drive-strength = <2>; + bias-disable; + }; + }; + + pcie1_clkreq_default: pcie1_clkreq_default { + mux { + pins = "gpio131"; + function = "pci_e1"; + }; + + config { + pins = "gpio131"; + drive-strength = <2>; + bias-pull-up; + }; + }; + + pcie1_perst_default: pcie1_perst_default { + mux { + pins = "gpio130"; + function = "gpio"; + }; + + config { + pins = "gpio130"; + drive-strength = <2>; + bias-pull-down; + }; + }; + + pcie1_wake_default: pcie1_wake_default { + mux { + pins = "gpio132"; + function = "gpio"; + }; + + config { + pins = "gpio132"; + drive-strength = <2>; + bias-pull-down; + }; + }; + + pcie1_clkreq_sleep: pcie1_clkreq_sleep { + mux { + pins = "gpio131"; + function = "gpio"; + }; + + config { + pins = "gpio131"; + drive-strength = <2>; + bias-disable; + }; + }; + + pcie1_wake_sleep: pcie1_wake_sleep { + mux { + pins = "gpio132"; + function = "gpio"; + }; + + config { + pins = "gpio132"; + drive-strength = <2>; + bias-disable; + }; + }; + + pcie2_clkreq_default: pcie2_clkreq_default { + mux { + pins = "gpio115"; + function = "pci_e2"; + }; + + config { + pins = "gpio115"; + drive-strength = <2>; + bias-pull-up; + }; + }; + + pcie2_perst_default: pcie2_perst_default { + mux { + pins = "gpio114"; + function = "gpio"; + }; + + config { + pins = "gpio114"; + drive-strength = <2>; + bias-pull-down; + }; + }; + + pcie2_wake_default: pcie2_wake_default { + mux { + pins = "gpio116"; + function = "gpio"; + }; + + config { + pins = "gpio116"; + drive-strength = <2>; + bias-pull-down; + }; + }; + + pcie2_clkreq_sleep: pcie2_clkreq_sleep { + mux { + pins = "gpio115"; + function = "gpio"; + }; + + config { + pins = "gpio115"; + drive-strength = <2>; + bias-disable; + }; + }; + + pcie2_wake_sleep: pcie2_wake_sleep { + mux { + pins = "gpio116"; + function = "gpio"; + }; + + config { + pins = "gpio116"; + drive-strength = <2>; + bias-disable; + }; + }; }; diff --git a/arch/arm64/boot/dts/qcom/msm8996.dtsi b/arch/arm64/boot/dts/qcom/msm8996.dtsi index 887b61c872dd..4b2afcc4fdf4 100644 --- a/arch/arm64/boot/dts/qcom/msm8996.dtsi +++ b/arch/arm64/boot/dts/qcom/msm8996.dtsi @@ -13,6 +13,7 @@ #include <dt-bindings/interrupt-controller/arm-gic.h> #include <dt-bindings/clock/qcom,gcc-msm8996.h> #include <dt-bindings/clock/qcom,mmcc-msm8996.h> +#include <dt-bindings/clock/qcom,rpmcc.h> / { model = "Qualcomm Technologies, Inc. MSM8996"; @@ -261,6 +262,8 @@ firmware { scm { compatible = "qcom,scm-msm8996"; + + qcom,dload-mode = <&tcsr 0x13000>; }; }; @@ -289,6 +292,11 @@ compatible = "qcom,rpm-msm8996"; qcom,glink-channels = "rpm_requests"; + rpmcc: qcom,rpmcc { + compatible = "qcom,rpmcc-msm8996"; + #clock-cells = <1>; + }; + pm8994-regulators { compatible = "qcom,rpm-pm8994-regulators"; @@ -358,6 +366,11 @@ reg = <0x740000 0x20000>; }; + tcsr: syscon@7a0000 { + compatible = "qcom,tcsr-msm8996", "syscon"; + reg = <0x7a0000 0x18000>; + }; + intc: interrupt-controller@9bc0000 { compatible = "arm,gic-v3"; #interrupt-cells = <3>; @@ -395,7 +408,7 @@ #clock-cells = <1>; }; - blsp1_spi0: spi@07575000 { + blsp1_spi0: spi@7575000 { compatible = "qcom,spi-qup-v2.2.1"; reg = <0x07575000 0x600>; interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>; @@ -410,7 +423,7 @@ status = "disabled"; }; - blsp2_i2c0: i2c@075b5000 { + blsp2_i2c0: i2c@75b5000 { compatible = "qcom,i2c-qup-v2.2.1"; reg = <0x075b5000 0x1000>; interrupts = <GIC_SPI 101 0>; @@ -441,7 +454,7 @@ status = "disabled"; }; - blsp2_i2c1: i2c@075b6000 { + blsp2_i2c1: i2c@75b6000 { compatible = "qcom,i2c-qup-v2.2.1"; reg = <0x075b6000 0x1000>; interrupts = <GIC_SPI 102 0>; @@ -466,7 +479,7 @@ status = "disabled"; }; - blsp1_i2c2: i2c@07577000 { + blsp1_i2c2: i2c@7577000 { compatible = "qcom,i2c-qup-v2.2.1"; reg = <0x07577000 0x1000>; interrupts = <GIC_SPI 97 0>; @@ -481,7 +494,7 @@ status = "disabled"; }; - blsp2_spi5: spi@075ba000{ + blsp2_spi5: spi@75ba000{ compatible = "qcom,spi-qup-v2.2.1"; reg = <0x075ba000 0x600>; interrupts = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>; @@ -522,7 +535,7 @@ #interrupt-cells = <2>; }; - timer@09840000 { + timer@9840000 { #address-cells = <1>; #size-cells = <1>; ranges; @@ -819,6 +832,172 @@ phy-names = "usb2-phy", "usb3-phy"; }; }; + + agnoc@0 { + power-domains = <&gcc AGGRE0_NOC_GDSC>; + compatible = "simple-pm-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges; + + pcie0: qcom,pcie@00600000 { + compatible = "qcom,pcie-msm8996", "snps,dw-pcie"; + status = "disabled"; + power-domains = <&gcc PCIE0_GDSC>; + bus-range = <0x00 0xff>; + num-lanes = <1>; + + reg = <0x00600000 0x2000>, + <0x0c000000 0xf1d>, + <0x0c000f20 0xa8>, + <0x0c100000 0x100000>; + reg-names = "parf", "dbi", "elbi","config"; + + phys = <&pciephy_0>; + phy-names = "pciephy"; + + #address-cells = <3>; + #size-cells = <2>; + ranges = <0x01000000 0x0 0x0c200000 0x0c200000 0x0 0x100000>, + <0x02000000 0x0 0x0c300000 0x0c300000 0x0 0xd00000>; + + interrupts = <GIC_SPI 405 IRQ_TYPE_NONE>; + interrupt-names = "msi"; + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 0 0x7>; + interrupt-map = <0 0 0 1 &intc 0 244 IRQ_TYPE_LEVEL_HIGH>, /* int_a */ + <0 0 0 2 &intc 0 245 IRQ_TYPE_LEVEL_HIGH>, /* int_b */ + <0 0 0 3 &intc 0 247 IRQ_TYPE_LEVEL_HIGH>, /* int_c */ + <0 0 0 4 &intc 0 248 IRQ_TYPE_LEVEL_HIGH>; /* int_d */ + + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&pcie0_clkreq_default &pcie0_perst_default &pcie0_wake_default>; + pinctrl-1 = <&pcie0_clkreq_sleep &pcie0_perst_default &pcie0_wake_sleep>; + + + vdda-supply = <&pm8994_l28>; + + linux,pci-domain = <0>; + + clocks = <&gcc GCC_PCIE_0_PIPE_CLK>, + <&gcc GCC_PCIE_0_AUX_CLK>, + <&gcc GCC_PCIE_0_CFG_AHB_CLK>, + <&gcc GCC_PCIE_0_MSTR_AXI_CLK>, + <&gcc GCC_PCIE_0_SLV_AXI_CLK>; + + clock-names = "pipe", + "aux", + "cfg", + "bus_master", + "bus_slave"; + + }; + + pcie1: qcom,pcie@00608000 { + compatible = "qcom,pcie-msm8996", "snps,dw-pcie"; + power-domains = <&gcc PCIE1_GDSC>; + bus-range = <0x00 0xff>; + num-lanes = <1>; + + status = "disabled"; + + reg = <0x00608000 0x2000>, + <0x0d000000 0xf1d>, + <0x0d000f20 0xa8>, + <0x0d100000 0x100000>; + + reg-names = "parf", "dbi", "elbi","config"; + + phys = <&pciephy_1>; + phy-names = "pciephy"; + + #address-cells = <3>; + #size-cells = <2>; + ranges = <0x01000000 0x0 0x0d200000 0x0d200000 0x0 0x100000>, + <0x02000000 0x0 0x0d300000 0x0d300000 0x0 0xd00000>; + + interrupts = <GIC_SPI 413 IRQ_TYPE_NONE>; + interrupt-names = "msi"; + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 0 0x7>; + interrupt-map = <0 0 0 1 &intc 0 272 IRQ_TYPE_LEVEL_HIGH>, /* int_a */ + <0 0 0 2 &intc 0 273 IRQ_TYPE_LEVEL_HIGH>, /* int_b */ + <0 0 0 3 &intc 0 274 IRQ_TYPE_LEVEL_HIGH>, /* int_c */ + <0 0 0 4 &intc 0 275 IRQ_TYPE_LEVEL_HIGH>; /* int_d */ + + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&pcie1_clkreq_default &pcie1_perst_default &pcie1_wake_default>; + pinctrl-1 = <&pcie1_clkreq_sleep &pcie1_perst_default &pcie1_wake_sleep>; + + + vdda-supply = <&pm8994_l28>; + linux,pci-domain = <1>; + + clocks = <&gcc GCC_PCIE_1_PIPE_CLK>, + <&gcc GCC_PCIE_1_AUX_CLK>, + <&gcc GCC_PCIE_1_CFG_AHB_CLK>, + <&gcc GCC_PCIE_1_MSTR_AXI_CLK>, + <&gcc GCC_PCIE_1_SLV_AXI_CLK>; + + clock-names = "pipe", + "aux", + "cfg", + "bus_master", + "bus_slave"; + }; + + pcie2: qcom,pcie@00610000 { + compatible = "qcom,pcie-msm8996", "snps,dw-pcie"; + power-domains = <&gcc PCIE2_GDSC>; + bus-range = <0x00 0xff>; + num-lanes = <1>; + status = "disabled"; + reg = <0x00610000 0x2000>, + <0x0e000000 0xf1d>, + <0x0e000f20 0xa8>, + <0x0e100000 0x100000>; + + reg-names = "parf", "dbi", "elbi","config"; + + phys = <&pciephy_2>; + phy-names = "pciephy"; + + #address-cells = <3>; + #size-cells = <2>; + ranges = <0x01000000 0x0 0x0e200000 0x0e200000 0x0 0x100000>, + <0x02000000 0x0 0x0e300000 0x0e300000 0x0 0x1d00000>; + + device_type = "pci"; + + interrupts = <GIC_SPI 421 IRQ_TYPE_NONE>; + interrupt-names = "msi"; + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 0 0x7>; + interrupt-map = <0 0 0 1 &intc 0 142 IRQ_TYPE_LEVEL_HIGH>, /* int_a */ + <0 0 0 2 &intc 0 143 IRQ_TYPE_LEVEL_HIGH>, /* int_b */ + <0 0 0 3 &intc 0 144 IRQ_TYPE_LEVEL_HIGH>, /* int_c */ + <0 0 0 4 &intc 0 145 IRQ_TYPE_LEVEL_HIGH>; /* int_d */ + + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&pcie2_clkreq_default &pcie2_perst_default &pcie2_wake_default>; + pinctrl-1 = <&pcie2_clkreq_sleep &pcie2_perst_default &pcie2_wake_sleep >; + + vdda-supply = <&pm8994_l28>; + + linux,pci-domain = <2>; + clocks = <&gcc GCC_PCIE_2_PIPE_CLK>, + <&gcc GCC_PCIE_2_AUX_CLK>, + <&gcc GCC_PCIE_2_CFG_AHB_CLK>, + <&gcc GCC_PCIE_2_MSTR_AXI_CLK>, + <&gcc GCC_PCIE_2_SLV_AXI_CLK>; + + clock-names = "pipe", + "aux", + "cfg", + "bus_master", + "bus_slave"; + }; + }; }; adsp-pil { diff --git a/arch/arm64/boot/dts/realtek/Makefile b/arch/arm64/boot/dts/realtek/Makefile index 6e2ae59a3745..c108d73f8766 100644 --- a/arch/arm64/boot/dts/realtek/Makefile +++ b/arch/arm64/boot/dts/realtek/Makefile @@ -1 +1,3 @@ +dtb-$(CONFIG_ARCH_REALTEK) += rtd1295-mele-v9.dtb +dtb-$(CONFIG_ARCH_REALTEK) += rtd1295-probox2-ava.dtb dtb-$(CONFIG_ARCH_REALTEK) += rtd1295-zidoo-x9s.dtb diff --git a/arch/arm64/boot/dts/realtek/rtd1295-mele-v9.dts b/arch/arm64/boot/dts/realtek/rtd1295-mele-v9.dts new file mode 100644 index 000000000000..bd584e99fff9 --- /dev/null +++ b/arch/arm64/boot/dts/realtek/rtd1295-mele-v9.dts @@ -0,0 +1,31 @@ +/* + * Copyright (c) 2017 Andreas Färber + * + * SPDX-License-Identifier: (GPL-2.0+ OR MIT) + */ + +/dts-v1/; + +#include "rtd1295.dtsi" + +/ { + compatible = "mele,v9", "realtek,rtd1295"; + model = "MeLE V9"; + + memory@0 { + device_type = "memory"; + reg = <0x0 0x80000000>; + }; + + aliases { + serial0 = &uart0; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; +}; + +&uart0 { + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/realtek/rtd1295-probox2-ava.dts b/arch/arm64/boot/dts/realtek/rtd1295-probox2-ava.dts new file mode 100644 index 000000000000..8e2b0e75298a --- /dev/null +++ b/arch/arm64/boot/dts/realtek/rtd1295-probox2-ava.dts @@ -0,0 +1,31 @@ +/* + * Copyright (c) 2017 Andreas Färber + * + * SPDX-License-Identifier: (GPL-2.0+ OR MIT) + */ + +/dts-v1/; + +#include "rtd1295.dtsi" + +/ { + compatible = "probox2,ava", "realtek,rtd1295"; + model = "PROBOX2 AVA"; + + memory@0 { + device_type = "memory"; + reg = <0x0 0x80000000>; + }; + + aliases { + serial0 = &uart0; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; +}; + +&uart0 { + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/realtek/rtd1295-zidoo-x9s.dts b/arch/arm64/boot/dts/realtek/rtd1295-zidoo-x9s.dts index 6efa8091bb30..da19faab29d5 100644 --- a/arch/arm64/boot/dts/realtek/rtd1295-zidoo-x9s.dts +++ b/arch/arm64/boot/dts/realtek/rtd1295-zidoo-x9s.dts @@ -6,12 +6,6 @@ /dts-v1/; -/memreserve/ 0x0000000000000000 0x0000000000030000; -/memreserve/ 0x000000000001f000 0x0000000000001000; -/memreserve/ 0x0000000000030000 0x00000000000d0000; -/memreserve/ 0x0000000001b00000 0x00000000004be000; -/memreserve/ 0x0000000001ffe000 0x0000000000004000; - #include "rtd1295.dtsi" / { diff --git a/arch/arm64/boot/dts/realtek/rtd1295.dtsi b/arch/arm64/boot/dts/realtek/rtd1295.dtsi index d8f84666c8ce..8d9ac05d17dc 100644 --- a/arch/arm64/boot/dts/realtek/rtd1295.dtsi +++ b/arch/arm64/boot/dts/realtek/rtd1295.dtsi @@ -6,13 +6,10 @@ * SPDX-License-Identifier: (GPL-2.0+ OR MIT) */ -#include <dt-bindings/interrupt-controller/arm-gic.h> +#include "rtd129x.dtsi" / { compatible = "realtek,rtd1295"; - interrupt-parent = <&gic>; - #address-cells = <1>; - #size-cells = <1>; cpus { #address-cells = <2>; @@ -62,12 +59,6 @@ }; }; - arm-pmu { - compatible = "arm,cortex-a53-pmu"; - interrupts = <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>; - interrupt-affinity = <&cpu0>, <&cpu1>, <&cpu2>, <&cpu3>; - }; - timer { compatible = "arm,armv8-timer"; interrupts = <GIC_PPI 13 @@ -79,53 +70,8 @@ <GIC_PPI 10 (GIC_CPU_MASK_RAW(0xf) | IRQ_TYPE_LEVEL_LOW)>; }; +}; - soc { - compatible = "simple-bus"; - #address-cells = <1>; - #size-cells = <1>; - /* Exclude up to 2 GiB of RAM */ - ranges = <0x80000000 0x80000000 0x80000000>; - - uart0: serial@98007800 { - compatible = "snps,dw-apb-uart"; - reg = <0x98007800 0x400>, - <0x98007000 0x100>; - reg-shift = <2>; - reg-io-width = <4>; - clock-frequency = <27000000>; - status = "disabled"; - }; - - uart1: serial@9801b200 { - compatible = "snps,dw-apb-uart"; - reg = <0x9801b200 0x100>, - <0x9801b00c 0x100>; - reg-shift = <2>; - reg-io-width = <4>; - clock-frequency = <432000000>; - status = "disabled"; - }; - - uart2: serial@9801b400 { - compatible = "snps,dw-apb-uart"; - reg = <0x9801b400 0x100>, - <0x9801b00c 0x100>; - reg-shift = <2>; - reg-io-width = <4>; - clock-frequency = <432000000>; - status = "disabled"; - }; - - gic: interrupt-controller@ff011000 { - compatible = "arm,gic-400"; - reg = <0xff011000 0x1000>, - <0xff012000 0x2000>, - <0xff014000 0x2000>, - <0xff016000 0x2000>; - interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>; - interrupt-controller; - #interrupt-cells = <3>; - }; - }; +&arm_pmu { + interrupt-affinity = <&cpu0>, <&cpu1>, <&cpu2>, <&cpu3>; }; diff --git a/arch/arm64/boot/dts/realtek/rtd129x.dtsi b/arch/arm64/boot/dts/realtek/rtd129x.dtsi new file mode 100644 index 000000000000..b9cb92466fc7 --- /dev/null +++ b/arch/arm64/boot/dts/realtek/rtd129x.dtsi @@ -0,0 +1,72 @@ +/* + * Realtek RTD1293/RTD1295/RTD1296 SoC + * + * Copyright (c) 2016-2017 Andreas Färber + * + * SPDX-License-Identifier: (GPL-2.0+ OR MIT) + */ + +/memreserve/ 0x0000000000000000 0x0000000000030000; +/memreserve/ 0x000000000001f000 0x0000000000001000; +/memreserve/ 0x0000000000030000 0x00000000000d0000; +/memreserve/ 0x0000000001b00000 0x00000000004be000; +/memreserve/ 0x0000000001ffe000 0x0000000000004000; + +#include <dt-bindings/interrupt-controller/arm-gic.h> + +/ { + interrupt-parent = <&gic>; + #address-cells = <1>; + #size-cells = <1>; + + arm_pmu: arm-pmu { + compatible = "arm,cortex-a53-pmu"; + interrupts = <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>; + }; + + soc { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + /* Exclude up to 2 GiB of RAM */ + ranges = <0x80000000 0x80000000 0x80000000>; + + uart0: serial@98007800 { + compatible = "snps,dw-apb-uart"; + reg = <0x98007800 0x400>; + reg-shift = <2>; + reg-io-width = <4>; + clock-frequency = <27000000>; + status = "disabled"; + }; + + uart1: serial@9801b200 { + compatible = "snps,dw-apb-uart"; + reg = <0x9801b200 0x100>; + reg-shift = <2>; + reg-io-width = <4>; + clock-frequency = <432000000>; + status = "disabled"; + }; + + uart2: serial@9801b400 { + compatible = "snps,dw-apb-uart"; + reg = <0x9801b400 0x100>; + reg-shift = <2>; + reg-io-width = <4>; + clock-frequency = <432000000>; + status = "disabled"; + }; + + gic: interrupt-controller@ff011000 { + compatible = "arm,gic-400"; + reg = <0xff011000 0x1000>, + <0xff012000 0x2000>, + <0xff014000 0x2000>, + <0xff016000 0x2000>; + interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>; + interrupt-controller; + #interrupt-cells = <3>; + }; + }; +}; diff --git a/arch/arm64/boot/dts/renesas/Makefile b/arch/arm64/boot/dts/renesas/Makefile index 6b282283f1bf..646198d82903 100644 --- a/arch/arm64/boot/dts/renesas/Makefile +++ b/arch/arm64/boot/dts/renesas/Makefile @@ -1,6 +1,10 @@ # SPDX-License-Identifier: GPL-2.0 dtb-$(CONFIG_ARCH_R8A7795) += r8a7795-salvator-x.dtb r8a7795-h3ulcb.dtb +dtb-$(CONFIG_ARCH_R8A7795) += r8a7795-h3ulcb-kf.dtb dtb-$(CONFIG_ARCH_R8A7795) += r8a7795-salvator-xs.dtb dtb-$(CONFIG_ARCH_R8A7795) += r8a7795-es1-salvator-x.dtb r8a7795-es1-h3ulcb.dtb +dtb-$(CONFIG_ARCH_R8A7795) += r8a7795-es1-h3ulcb-kf.dtb dtb-$(CONFIG_ARCH_R8A7796) += r8a7796-salvator-x.dtb r8a7796-m3ulcb.dtb +dtb-$(CONFIG_ARCH_R8A7796) += r8a7796-m3ulcb-kf.dtb +dtb-$(CONFIG_ARCH_R8A77970) += r8a77970-eagle.dtb dtb-$(CONFIG_ARCH_R8A77995) += r8a77995-draak.dtb diff --git a/arch/arm64/boot/dts/renesas/r8a7795-es1-h3ulcb-kf.dts b/arch/arm64/boot/dts/renesas/r8a7795-es1-h3ulcb-kf.dts new file mode 100644 index 000000000000..009cb1cb0dde --- /dev/null +++ b/arch/arm64/boot/dts/renesas/r8a7795-es1-h3ulcb-kf.dts @@ -0,0 +1,19 @@ +/* + * Device Tree Source for the H3ULCB Kingfisher board + * + * Copyright (C) 2017 Renesas Electronics Corp. + * Copyright (C) 2017 Cogent Embedded, Inc. + * + * This file is licensed under the terms of the GNU General Public License + * version 2. This program is licensed "as is" without any warranty of any + * kind, whether express or implied. + */ + +#include "r8a7795-es1-h3ulcb.dts" +#include "ulcb-kf.dtsi" + +/ { + model = "Renesas H3ULCB Kingfisher board based on r8a7795 ES1.x"; + compatible = "shimafuji,kingfisher", "renesas,h3ulcb", + "renesas,r8a7795"; +}; diff --git a/arch/arm64/boot/dts/renesas/r8a7795-es1.dtsi b/arch/arm64/boot/dts/renesas/r8a7795-es1.dtsi index aaa5e67a963e..655dd30639c5 100644 --- a/arch/arm64/boot/dts/renesas/r8a7795-es1.dtsi +++ b/arch/arm64/boot/dts/renesas/r8a7795-es1.dtsi @@ -11,7 +11,7 @@ #include "r8a7795.dtsi" &soc { - xhci1: usb@ee0400000 { + xhci1: usb@ee040000 { compatible = "renesas,xhci-r8a7795", "renesas,rcar-gen3-xhci"; reg = <0 0xee040000 0 0xc00>; interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>; diff --git a/arch/arm64/boot/dts/renesas/r8a7795-h3ulcb-kf.dts b/arch/arm64/boot/dts/renesas/r8a7795-h3ulcb-kf.dts new file mode 100644 index 000000000000..4403227c0f97 --- /dev/null +++ b/arch/arm64/boot/dts/renesas/r8a7795-h3ulcb-kf.dts @@ -0,0 +1,19 @@ +/* + * Device Tree Source for the H3ULCB Kingfisher board + * + * Copyright (C) 2017 Renesas Electronics Corp. + * Copyright (C) 2017 Cogent Embedded, Inc. + * + * This file is licensed under the terms of the GNU General Public License + * version 2. This program is licensed "as is" without any warranty of any + * kind, whether express or implied. + */ + +#include "r8a7795-h3ulcb.dts" +#include "ulcb-kf.dtsi" + +/ { + model = "Renesas H3ULCB Kingfisher board based on r8a7795 ES2.0+"; + compatible = "shimafuji,kingfisher", "renesas,h3ulcb", + "renesas,r8a7795"; +}; diff --git a/arch/arm64/boot/dts/renesas/r8a7795.dtsi b/arch/arm64/boot/dts/renesas/r8a7795.dtsi index 2938195b9571..15ef292a8d9f 100644 --- a/arch/arm64/boot/dts/renesas/r8a7795.dtsi +++ b/arch/arm64/boot/dts/renesas/r8a7795.dtsi @@ -220,7 +220,7 @@ gpio0: gpio@e6050000 { compatible = "renesas,gpio-r8a7795", - "renesas,gpio-rcar"; + "renesas,rcar-gen3-gpio"; reg = <0 0xe6050000 0 0x50>; interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>; #gpio-cells = <2>; @@ -235,7 +235,7 @@ gpio1: gpio@e6051000 { compatible = "renesas,gpio-r8a7795", - "renesas,gpio-rcar"; + "renesas,rcar-gen3-gpio"; reg = <0 0xe6051000 0 0x50>; interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>; #gpio-cells = <2>; @@ -250,7 +250,7 @@ gpio2: gpio@e6052000 { compatible = "renesas,gpio-r8a7795", - "renesas,gpio-rcar"; + "renesas,rcar-gen3-gpio"; reg = <0 0xe6052000 0 0x50>; interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>; #gpio-cells = <2>; @@ -265,7 +265,7 @@ gpio3: gpio@e6053000 { compatible = "renesas,gpio-r8a7795", - "renesas,gpio-rcar"; + "renesas,rcar-gen3-gpio"; reg = <0 0xe6053000 0 0x50>; interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>; #gpio-cells = <2>; @@ -280,7 +280,7 @@ gpio4: gpio@e6054000 { compatible = "renesas,gpio-r8a7795", - "renesas,gpio-rcar"; + "renesas,rcar-gen3-gpio"; reg = <0 0xe6054000 0 0x50>; interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>; #gpio-cells = <2>; @@ -295,7 +295,7 @@ gpio5: gpio@e6055000 { compatible = "renesas,gpio-r8a7795", - "renesas,gpio-rcar"; + "renesas,rcar-gen3-gpio"; reg = <0 0xe6055000 0 0x50>; interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>; #gpio-cells = <2>; @@ -310,7 +310,7 @@ gpio6: gpio@e6055400 { compatible = "renesas,gpio-r8a7795", - "renesas,gpio-rcar"; + "renesas,rcar-gen3-gpio"; reg = <0 0xe6055400 0 0x50>; interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>; #gpio-cells = <2>; @@ -325,7 +325,7 @@ gpio7: gpio@e6055800 { compatible = "renesas,gpio-r8a7795", - "renesas,gpio-rcar"; + "renesas,rcar-gen3-gpio"; reg = <0 0xe6055800 0 0x50>; interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>; #gpio-cells = <2>; @@ -1471,6 +1471,17 @@ status = "disabled"; }; + usb3_peri0: usb@ee020000 { + compatible = "renesas,r8a7795-usb3-peri", + "renesas,rcar-gen3-usb3-peri"; + reg = <0 0xee020000 0 0x400>; + interrupts = <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 328>; + power-domains = <&sysc R8A7795_PD_ALWAYS_ON>; + resets = <&cpg 328>; + status = "disabled"; + }; + usb_dmac0: dma-controller@e65a0000 { compatible = "renesas,r8a7795-usb-dmac", "renesas,usb-dmac"; @@ -2014,7 +2025,7 @@ renesas,fcp = <&fcpf1>; }; - hdmi0: hdmi0@fead0000 { + hdmi0: hdmi@fead0000 { compatible = "renesas,r8a7795-hdmi", "renesas,rcar-gen3-hdmi"; reg = <0 0xfead0000 0 0x10000>; interrupts = <GIC_SPI 389 IRQ_TYPE_LEVEL_HIGH>; @@ -2039,7 +2050,7 @@ }; }; - hdmi1: hdmi1@feae0000 { + hdmi1: hdmi@feae0000 { compatible = "renesas,r8a7795-hdmi", "renesas,rcar-gen3-hdmi"; reg = <0 0xfeae0000 0 0x10000>; interrupts = <GIC_SPI 436 IRQ_TYPE_LEVEL_HIGH>; diff --git a/arch/arm64/boot/dts/renesas/r8a7796-m3ulcb-kf.dts b/arch/arm64/boot/dts/renesas/r8a7796-m3ulcb-kf.dts new file mode 100644 index 000000000000..de2390f009e7 --- /dev/null +++ b/arch/arm64/boot/dts/renesas/r8a7796-m3ulcb-kf.dts @@ -0,0 +1,19 @@ +/* + * Device Tree Source for the M3ULCB Kingfisher board + * + * Copyright (C) 2017 Renesas Electronics Corp. + * Copyright (C) 2017 Cogent Embedded, Inc. + * + * This file is licensed under the terms of the GNU General Public License + * version 2. This program is licensed "as is" without any warranty of any + * kind, whether express or implied. + */ + +#include "r8a7796-m3ulcb.dts" +#include "ulcb-kf.dtsi" + +/ { + model = "Renesas M3ULCB Kingfisher board based on r8a7796"; + compatible = "shimafuji,kingfisher", "renesas,m3ulcb", + "renesas,r8a7796"; +}; diff --git a/arch/arm64/boot/dts/renesas/r8a7796.dtsi b/arch/arm64/boot/dts/renesas/r8a7796.dtsi index 369092e17e34..f2b2e40c655e 100644 --- a/arch/arm64/boot/dts/renesas/r8a7796.dtsi +++ b/arch/arm64/boot/dts/renesas/r8a7796.dtsi @@ -214,7 +214,7 @@ gpio0: gpio@e6050000 { compatible = "renesas,gpio-r8a7796", - "renesas,gpio-rcar"; + "renesas,rcar-gen3-gpio"; reg = <0 0xe6050000 0 0x50>; interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>; #gpio-cells = <2>; @@ -229,7 +229,7 @@ gpio1: gpio@e6051000 { compatible = "renesas,gpio-r8a7796", - "renesas,gpio-rcar"; + "renesas,rcar-gen3-gpio"; reg = <0 0xe6051000 0 0x50>; interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>; #gpio-cells = <2>; @@ -244,7 +244,7 @@ gpio2: gpio@e6052000 { compatible = "renesas,gpio-r8a7796", - "renesas,gpio-rcar"; + "renesas,rcar-gen3-gpio"; reg = <0 0xe6052000 0 0x50>; interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>; #gpio-cells = <2>; @@ -259,7 +259,7 @@ gpio3: gpio@e6053000 { compatible = "renesas,gpio-r8a7796", - "renesas,gpio-rcar"; + "renesas,rcar-gen3-gpio"; reg = <0 0xe6053000 0 0x50>; interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>; #gpio-cells = <2>; @@ -274,7 +274,7 @@ gpio4: gpio@e6054000 { compatible = "renesas,gpio-r8a7796", - "renesas,gpio-rcar"; + "renesas,rcar-gen3-gpio"; reg = <0 0xe6054000 0 0x50>; interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>; #gpio-cells = <2>; @@ -289,7 +289,7 @@ gpio5: gpio@e6055000 { compatible = "renesas,gpio-r8a7796", - "renesas,gpio-rcar"; + "renesas,rcar-gen3-gpio"; reg = <0 0xe6055000 0 0x50>; interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>; #gpio-cells = <2>; @@ -304,7 +304,7 @@ gpio6: gpio@e6055400 { compatible = "renesas,gpio-r8a7796", - "renesas,gpio-rcar"; + "renesas,rcar-gen3-gpio"; reg = <0 0xe6055400 0 0x50>; interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>; #gpio-cells = <2>; @@ -319,7 +319,7 @@ gpio7: gpio@e6055800 { compatible = "renesas,gpio-r8a7796", - "renesas,gpio-rcar"; + "renesas,rcar-gen3-gpio"; reg = <0 0xe6055800 0 0x50>; interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>; #gpio-cells = <2>; @@ -383,6 +383,22 @@ #power-domain-cells = <1>; }; + intc_ex: interrupt-controller@e61c0000 { + compatible = "renesas,intc-ex-r8a7796", "renesas,irqc"; + #interrupt-cells = <2>; + interrupt-controller; + reg = <0 0xe61c0000 0 0x200>; + interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 161 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 407>; + power-domains = <&sysc R8A7796_PD_ALWAYS_ON>; + resets = <&cpg 407>; + }; + i2c_dvfs: i2c@e60b0000 { #address-cells = <1>; #size-cells = <0>; @@ -1279,6 +1295,17 @@ status = "disabled"; }; + usb3_peri0: usb@ee020000 { + compatible = "renesas,r8a7796-usb3-peri", + "renesas,rcar-gen3-usb3-peri"; + reg = <0 0xee020000 0 0x400>; + interrupts = <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 328>; + power-domains = <&sysc R8A7796_PD_ALWAYS_ON>; + resets = <&cpg 328>; + status = "disabled"; + }; + ohci0: usb@ee080000 { compatible = "generic-ohci"; reg = <0 0xee080000 0 0x100>; @@ -1659,6 +1686,16 @@ /* placeholder */ }; + fdp1@fe940000 { + compatible = "renesas,fdp1"; + reg = <0 0xfe940000 0 0x2400>; + interrupts = <GIC_SPI 262 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 119>; + power-domains = <&sysc R8A7796_PD_A3VC>; + resets = <&cpg 119>; + renesas,fcp = <&fcpf0>; + }; + fcpf0: fcp@fe950000 { compatible = "renesas,fcpf"; reg = <0 0xfe950000 0 0x200>; diff --git a/arch/arm64/boot/dts/renesas/r8a77970-eagle.dts b/arch/arm64/boot/dts/renesas/r8a77970-eagle.dts new file mode 100644 index 000000000000..a711e77cc6a5 --- /dev/null +++ b/arch/arm64/boot/dts/renesas/r8a77970-eagle.dts @@ -0,0 +1,57 @@ +/* + * Device Tree Source for the Eagle board + * + * Copyright (C) 2016-2017 Renesas Electronics Corp. + * Copyright (C) 2017 Cogent Embedded, Inc. + * + * This file is licensed under the terms of the GNU General Public License + * version 2. This program is licensed "as is" without any warranty of any + * kind, whether express or implied. + */ + +/dts-v1/; +#include "r8a77970.dtsi" + +/ { + model = "Renesas Eagle board based on r8a77970"; + compatible = "renesas,eagle", "renesas,r8a77970"; + + aliases { + serial0 = &scif0; + ethernet0 = &avb; + }; + + chosen { + bootargs = "ignore_loglevel rw root=/dev/nfs ip=dhcp"; + stdout-path = "serial0:115200n8"; + }; + + memory@48000000 { + device_type = "memory"; + /* first 128MB is reserved for secure area. */ + reg = <0x0 0x48000000 0x0 0x38000000>; + }; +}; + +&extal_clk { + clock-frequency = <16666666>; +}; + +&extalr_clk { + clock-frequency = <32768>; +}; + +&scif0 { + status = "okay"; +}; + +&avb { + renesas,no-ether-link; + phy-handle = <&phy0>; + status = "okay"; + + phy0: ethernet-phy@0 { + rxc-skew-ps = <1500>; + reg = <0>; + }; +}; diff --git a/arch/arm64/boot/dts/renesas/r8a77970.dtsi b/arch/arm64/boot/dts/renesas/r8a77970.dtsi new file mode 100644 index 000000000000..97e6981938e7 --- /dev/null +++ b/arch/arm64/boot/dts/renesas/r8a77970.dtsi @@ -0,0 +1,382 @@ +/* + * Device Tree Source for the r8a77970 SoC + * + * Copyright (C) 2016-2017 Renesas Electronics Corp. + * Copyright (C) 2017 Cogent Embedded, Inc. + * + * This file is licensed under the terms of the GNU General Public License + * version 2. This program is licensed "as is" without any warranty of any + * kind, whether express or implied. + */ + +#include <dt-bindings/interrupt-controller/irq.h> +#include <dt-bindings/interrupt-controller/arm-gic.h> +#include <dt-bindings/clock/renesas-cpg-mssr.h> + +/ { + compatible = "renesas,r8a77970"; + #address-cells = <2>; + #size-cells = <2>; + + psci { + compatible = "arm,psci-1.0", "arm,psci-0.2"; + method = "smc"; + }; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + a53_0: cpu@0 { + device_type = "cpu"; + compatible = "arm,cortex-a53", "arm,armv8"; + reg = <0>; + clocks = <&cpg CPG_CORE 0>; + power-domains = <&sysc 5>; + next-level-cache = <&L2_CA53>; + enable-method = "psci"; + }; + + L2_CA53: cache-controller { + compatible = "cache"; + power-domains = <&sysc 21>; + cache-unified; + cache-level = <2>; + }; + }; + + extal_clk: extal { + compatible = "fixed-clock"; + #clock-cells = <0>; + /* This value must be overridden by the board */ + clock-frequency = <0>; + }; + + extalr_clk: extalr { + compatible = "fixed-clock"; + #clock-cells = <0>; + /* This value must be overridden by the board */ + clock-frequency = <0>; + }; + + /* External SCIF clock - to be overridden by boards that provide it */ + scif_clk: scif { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <0>; + }; + + soc { + compatible = "simple-bus"; + interrupt-parent = <&gic>; + + #address-cells = <2>; + #size-cells = <2>; + ranges; + + gic: interrupt-controller@f1010000 { + compatible = "arm,gic-400"; + #interrupt-cells = <3>; + #address-cells = <0>; + interrupt-controller; + reg = <0 0xf1010000 0 0x1000>, + <0 0xf1020000 0 0x20000>, + <0 0xf1040000 0 0x20000>, + <0 0xf1060000 0 0x20000>; + interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(1) | + IRQ_TYPE_LEVEL_HIGH)>; + clocks = <&cpg CPG_MOD 408>; + clock-names = "clk"; + power-domains = <&sysc 32>; + resets = <&cpg 408>; + }; + + timer { + compatible = "arm,armv8-timer"; + interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(1) | + IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(1) | + IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(1) | + IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(1) | + IRQ_TYPE_LEVEL_LOW)>; + }; + + cpg: clock-controller@e6150000 { + compatible = "renesas,r8a77970-cpg-mssr"; + reg = <0 0xe6150000 0 0x1000>; + clocks = <&extal_clk>, <&extalr_clk>; + clock-names = "extal", "extalr"; + #clock-cells = <2>; + #power-domain-cells = <0>; + #reset-cells = <1>; + }; + + rst: reset-controller@e6160000 { + compatible = "renesas,r8a77970-rst"; + reg = <0 0xe6160000 0 0x200>; + }; + + sysc: system-controller@e6180000 { + compatible = "renesas,r8a77970-sysc"; + reg = <0 0xe6180000 0 0x440>; + #power-domain-cells = <1>; + }; + + intc_ex: interrupt-controller@e61c0000 { + compatible = "renesas,intc-ex-r8a77970", "renesas,irqc"; + #interrupt-cells = <2>; + interrupt-controller; + reg = <0 0xe61c0000 0 0x200>; + interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 161 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 407>; + power-domains = <&sysc 32>; + resets = <&cpg 407>; + }; + + prr: chipid@fff00044 { + compatible = "renesas,prr"; + reg = <0 0xfff00044 0 4>; + }; + + dmac1: dma-controller@e7300000 { + compatible = "renesas,dmac-r8a77970", + "renesas,rcar-dmac"; + reg = <0 0xe7300000 0 0x10000>; + interrupts = <GIC_SPI 220 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 216 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 217 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 218 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 219 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 308 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 309 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 310 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 311 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "error", + "ch0", "ch1", "ch2", "ch3", + "ch4", "ch5", "ch6", "ch7"; + clocks = <&cpg CPG_MOD 218>; + clock-names = "fck"; + power-domains = <&sysc 32>; + resets = <&cpg 218>; + #dma-cells = <1>; + dma-channels = <8>; + }; + + dmac2: dma-controller@e7310000 { + compatible = "renesas,dmac-r8a77970", + "renesas,rcar-dmac"; + reg = <0 0xe7310000 0 0x10000>; + interrupts = <GIC_SPI 307 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 312 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 313 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 314 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 315 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 316 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 317 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 318 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 319 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "error", + "ch0", "ch1", "ch2", "ch3", + "ch4", "ch5", "ch6", "ch7"; + clocks = <&cpg CPG_MOD 217>; + clock-names = "fck"; + power-domains = <&sysc 32>; + resets = <&cpg 217>; + #dma-cells = <1>; + dma-channels = <8>; + }; + + hscif0: serial@e6540000 { + compatible = "renesas,hscif-r8a77970", + "renesas,rcar-gen3-hscif", + "renesas,hscif"; + reg = <0 0xe6540000 0 96>; + interrupts = <GIC_SPI 154 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 520>, + <&cpg CPG_CORE 9>, + <&scif_clk>; + clock-names = "fck", "brg_int", "scif_clk"; + dmas = <&dmac1 0x31>, <&dmac1 0x30>, + <&dmac2 0x31>, <&dmac2 0x30>; + dma-names = "tx", "rx", "tx", "rx"; + power-domains = <&sysc 32>; + resets = <&cpg 520>; + status = "disabled"; + }; + + hscif1: serial@e6550000 { + compatible = "renesas,hscif-r8a77970", + "renesas,rcar-gen3-hscif", + "renesas,hscif"; + reg = <0 0xe6550000 0 96>; + interrupts = <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 519>, + <&cpg CPG_CORE 9>, + <&scif_clk>; + clock-names = "fck", "brg_int", "scif_clk"; + dmas = <&dmac1 0x33>, <&dmac1 0x32>, + <&dmac2 0x33>, <&dmac2 0x32>; + dma-names = "tx", "rx", "tx", "rx"; + power-domains = <&sysc 32>; + resets = <&cpg 519>; + status = "disabled"; + }; + + hscif2: serial@e6560000 { + compatible = "renesas,hscif-r8a77970", + "renesas,rcar-gen3-hscif", + "renesas,hscif"; + reg = <0 0xe6560000 0 96>; + interrupts = <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 518>, + <&cpg CPG_CORE 9>, + <&scif_clk>; + clock-names = "fck", "brg_int", "scif_clk"; + dmas = <&dmac1 0x35>, <&dmac1 0x34>, + <&dmac2 0x35>, <&dmac2 0x34>; + dma-names = "tx", "rx", "tx", "rx"; + power-domains = <&sysc 32>; + resets = <&cpg 518>; + status = "disabled"; + }; + + hscif3: serial@e66a0000 { + compatible = "renesas,hscif-r8a77970", + "renesas,rcar-gen3-hscif", "renesas,hscif"; + reg = <0 0xe66a0000 0 96>; + interrupts = <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 517>, + <&cpg CPG_CORE 9>, + <&scif_clk>; + clock-names = "fck", "brg_int", "scif_clk"; + dmas = <&dmac1 0x37>, <&dmac1 0x36>, + <&dmac2 0x37>, <&dmac2 0x36>; + dma-names = "tx", "rx", "tx", "rx"; + power-domains = <&sysc 32>; + resets = <&cpg 517>; + status = "disabled"; + }; + + scif0: serial@e6e60000 { + compatible = "renesas,scif-r8a77970", + "renesas,rcar-gen3-scif", + "renesas,scif"; + reg = <0 0xe6e60000 0 64>; + interrupts = <GIC_SPI 152 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 207>, + <&cpg CPG_CORE 9>, + <&scif_clk>; + clock-names = "fck", "brg_int", "scif_clk"; + dmas = <&dmac1 0x51>, <&dmac1 0x50>, + <&dmac2 0x51>, <&dmac2 0x50>; + dma-names = "tx", "rx", "tx", "rx"; + power-domains = <&sysc 32>; + resets = <&cpg 207>; + status = "disabled"; + }; + + scif1: serial@e6e68000 { + compatible = "renesas,scif-r8a77970", + "renesas,rcar-gen3-scif", + "renesas,scif"; + reg = <0 0xe6e68000 0 64>; + interrupts = <GIC_SPI 153 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 206>, + <&cpg CPG_CORE 9>, + <&scif_clk>; + clock-names = "fck", "brg_int", "scif_clk"; + dmas = <&dmac1 0x53>, <&dmac1 0x52>, + <&dmac2 0x53>, <&dmac2 0x52>; + dma-names = "tx", "rx", "tx", "rx"; + power-domains = <&sysc 32>; + resets = <&cpg 206>; + status = "disabled"; + }; + + scif3: serial@e6c50000 { + compatible = "renesas,scif-r8a77970", + "renesas,rcar-gen3-scif", + "renesas,scif"; + reg = <0 0xe6c50000 0 64>; + interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 204>, + <&cpg CPG_CORE 9>, + <&scif_clk>; + clock-names = "fck", "brg_int", "scif_clk"; + dmas = <&dmac1 0x57>, <&dmac1 0x56>, + <&dmac2 0x57>, <&dmac2 0x56>; + dma-names = "tx", "rx", "tx", "rx"; + power-domains = <&sysc 32>; + resets = <&cpg 204>; + status = "disabled"; + }; + + scif4: serial@e6c40000 { + compatible = "renesas,scif-r8a77970", + "renesas,rcar-gen3-scif", "renesas,scif"; + reg = <0 0xe6c40000 0 64>; + interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 203>, + <&cpg CPG_CORE 9>, + <&scif_clk>; + clock-names = "fck", "brg_int", "scif_clk"; + dmas = <&dmac1 0x59>, <&dmac1 0x58>, + <&dmac2 0x59>, <&dmac2 0x58>; + dma-names = "tx", "rx", "tx", "rx"; + power-domains = <&sysc 32>; + resets = <&cpg 203>; + status = "disabled"; + }; + + avb: ethernet@e6800000 { + compatible = "renesas,etheravb-r8a77970", + "renesas,etheravb-rcar-gen3"; + reg = <0 0xe6800000 0 0x800>, <0 0xe6a00000 0 0x10000>; + interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "ch0", "ch1", "ch2", "ch3", + "ch4", "ch5", "ch6", "ch7", + "ch8", "ch9", "ch10", "ch11", + "ch12", "ch13", "ch14", "ch15", + "ch16", "ch17", "ch18", "ch19", + "ch20", "ch21", "ch22", "ch23", + "ch24"; + clocks = <&cpg CPG_MOD 812>; + power-domains = <&sysc 32>; + resets = <&cpg 812>; + phy-mode = "rgmii-id"; + #address-cells = <1>; + #size-cells = <0>; + }; + }; +}; diff --git a/arch/arm64/boot/dts/renesas/r8a77995-draak.dts b/arch/arm64/boot/dts/renesas/r8a77995-draak.dts index d144370051d5..09de73b11db8 100644 --- a/arch/arm64/boot/dts/renesas/r8a77995-draak.dts +++ b/arch/arm64/boot/dts/renesas/r8a77995-draak.dts @@ -11,6 +11,7 @@ /dts-v1/; #include "r8a77995.dtsi" +#include <dt-bindings/gpio/gpio.h> / { model = "Renesas Draak board based on r8a77995"; @@ -18,6 +19,7 @@ aliases { serial0 = &scif2; + ethernet0 = &avb; }; chosen { @@ -36,7 +38,83 @@ clock-frequency = <48000000>; }; +&pfc { + avb0_pins: avb { + mux { + groups = "avb0_link", "avb0_mdc", "avb0_mii"; + function = "avb0"; + }; + }; + + pwm0_pins: pwm0 { + groups = "pwm0_c"; + function = "pwm0"; + }; + + pwm1_pins: pwm1 { + groups = "pwm1_c"; + function = "pwm1"; + }; + + scif2_pins: scif2 { + groups = "scif2_data"; + function = "scif2"; + }; + + usb0_pins: usb0 { + groups = "usb0"; + function = "usb0"; + }; +}; + +&ehci0 { + status = "okay"; +}; + +&ohci0 { + status = "okay"; +}; + +&avb { + pinctrl-0 = <&avb0_pins>; + pinctrl-names = "default"; + renesas,no-ether-link; + phy-handle = <&phy0>; + status = "okay"; + + phy0: ethernet-phy@0 { + rxc-skew-ps = <1500>; + reg = <0>; + interrupt-parent = <&gpio5>; + interrupts = <19 IRQ_TYPE_LEVEL_LOW>; + }; +}; + &scif2 { + pinctrl-0 = <&scif2_pins>; + pinctrl-names = "default"; + + status = "okay"; +}; + +&usb2_phy0 { + pinctrl-0 = <&usb0_pins>; + pinctrl-names = "default"; + + status = "okay"; +}; + +&pwm0 { + pinctrl-0 = <&pwm0_pins>; + pinctrl-names = "default"; + + status = "okay"; +}; + +&pwm1 { + pinctrl-0 = <&pwm1_pins>; + pinctrl-names = "default"; + status = "okay"; }; diff --git a/arch/arm64/boot/dts/renesas/r8a77995.dtsi b/arch/arm64/boot/dts/renesas/r8a77995.dtsi index d0f95b78c022..788e3afae6e3 100644 --- a/arch/arm64/boot/dts/renesas/r8a77995.dtsi +++ b/arch/arm64/boot/dts/renesas/r8a77995.dtsi @@ -9,8 +9,9 @@ * kind, whether express or implied. */ -#include <dt-bindings/clock/renesas-cpg-mssr.h> +#include <dt-bindings/clock/r8a77995-cpg-mssr.h> #include <dt-bindings/interrupt-controller/arm-gic.h> +#include <dt-bindings/power/r8a77995-sysc.h> / { compatible = "renesas,r8a77995"; @@ -30,14 +31,14 @@ compatible = "arm,cortex-a53", "arm,armv8"; reg = <0x0>; device_type = "cpu"; - power-domains = <&sysc 5>; + power-domains = <&sysc R8A77995_PD_CA53_CPU0>; next-level-cache = <&L2_CA53>; enable-method = "psci"; }; L2_CA53: cache-controller-1 { compatible = "cache"; - power-domains = <&sysc 21>; + power-domains = <&sysc R8A77995_PD_CA53_SCU>; cache-unified; cache-level = <2>; }; @@ -76,7 +77,7 @@ (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_HIGH)>; clocks = <&cpg CPG_MOD 408>; clock-names = "clk"; - power-domains = <&sysc 32>; + power-domains = <&sysc R8A77995_PD_ALWAYS_ON>; resets = <&cpg 408>; }; @@ -97,7 +98,7 @@ "renesas,rcar-gen3-wdt"; reg = <0 0xe6020000 0 0x0c>; clocks = <&cpg CPG_MOD 402>; - power-domains = <&sysc 32>; + power-domains = <&sysc R8A77995_PD_ALWAYS_ON>; resets = <&cpg 402>; status = "disabled"; }; @@ -122,7 +123,7 @@ reg = <0 0xe6160000 0 0x0200>; }; - pfc: pfc@e6060000 { + pfc: pin-controller@e6060000 { compatible = "renesas,pfc-r8a77995"; reg = <0 0xe6060000 0 0x508>; }; @@ -138,18 +139,268 @@ #power-domain-cells = <1>; }; + intc_ex: interrupt-controller@e61c0000 { + compatible = "renesas,intc-ex-r8a77995", "renesas,irqc"; + #interrupt-cells = <2>; + interrupt-controller; + reg = <0 0xe61c0000 0 0x200>; + interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 161 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 407>; + power-domains = <&sysc R8A77995_PD_ALWAYS_ON>; + resets = <&cpg 407>; + }; + + gpio0: gpio@e6050000 { + compatible = "renesas,gpio-r8a77995", + "renesas,rcar-gen3-gpio", + "renesas,gpio-rcar"; + reg = <0 0xe6050000 0 0x50>; + interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>; + #gpio-cells = <2>; + gpio-controller; + gpio-ranges = <&pfc 0 0 9>; + #interrupt-cells = <2>; + interrupt-controller; + clocks = <&cpg CPG_MOD 912>; + power-domains = <&sysc R8A77995_PD_ALWAYS_ON>; + resets = <&cpg 912>; + }; + + gpio1: gpio@e6051000 { + compatible = "renesas,gpio-r8a77995", + "renesas,rcar-gen3-gpio", + "renesas,gpio-rcar"; + reg = <0 0xe6051000 0 0x50>; + interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>; + #gpio-cells = <2>; + gpio-controller; + gpio-ranges = <&pfc 0 32 32>; + #interrupt-cells = <2>; + interrupt-controller; + clocks = <&cpg CPG_MOD 911>; + power-domains = <&sysc R8A77995_PD_ALWAYS_ON>; + resets = <&cpg 911>; + }; + + gpio2: gpio@e6052000 { + compatible = "renesas,gpio-r8a77995", + "renesas,rcar-gen3-gpio", + "renesas,gpio-rcar"; + reg = <0 0xe6052000 0 0x50>; + interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>; + #gpio-cells = <2>; + gpio-controller; + gpio-ranges = <&pfc 0 64 32>; + #interrupt-cells = <2>; + interrupt-controller; + clocks = <&cpg CPG_MOD 910>; + power-domains = <&sysc R8A77995_PD_ALWAYS_ON>; + resets = <&cpg 910>; + }; + + gpio3: gpio@e6053000 { + compatible = "renesas,gpio-r8a77995", + "renesas,rcar-gen3-gpio", + "renesas,gpio-rcar"; + reg = <0 0xe6053000 0 0x50>; + interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>; + #gpio-cells = <2>; + gpio-controller; + gpio-ranges = <&pfc 0 96 10>; + #interrupt-cells = <2>; + interrupt-controller; + clocks = <&cpg CPG_MOD 909>; + power-domains = <&sysc R8A77995_PD_ALWAYS_ON>; + resets = <&cpg 909>; + }; + + gpio4: gpio@e6054000 { + compatible = "renesas,gpio-r8a77995", + "renesas,rcar-gen3-gpio", + "renesas,gpio-rcar"; + reg = <0 0xe6054000 0 0x50>; + interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>; + #gpio-cells = <2>; + gpio-controller; + gpio-ranges = <&pfc 0 128 32>; + #interrupt-cells = <2>; + interrupt-controller; + clocks = <&cpg CPG_MOD 908>; + power-domains = <&sysc R8A77995_PD_ALWAYS_ON>; + resets = <&cpg 908>; + }; + + gpio5: gpio@e6055000 { + compatible = "renesas,gpio-r8a77995", + "renesas,rcar-gen3-gpio", + "renesas,gpio-rcar"; + reg = <0 0xe6055000 0 0x50>; + interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>; + #gpio-cells = <2>; + gpio-controller; + gpio-ranges = <&pfc 0 160 21>; + #interrupt-cells = <2>; + interrupt-controller; + clocks = <&cpg CPG_MOD 907>; + power-domains = <&sysc R8A77995_PD_ALWAYS_ON>; + resets = <&cpg 907>; + }; + + gpio6: gpio@e6055400 { + compatible = "renesas,gpio-r8a77995", + "renesas,rcar-gen3-gpio", + "renesas,gpio-rcar"; + reg = <0 0xe6055400 0 0x50>; + interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>; + #gpio-cells = <2>; + gpio-controller; + gpio-ranges = <&pfc 0 192 14>; + #interrupt-cells = <2>; + interrupt-controller; + clocks = <&cpg CPG_MOD 906>; + power-domains = <&sysc R8A77995_PD_ALWAYS_ON>; + resets = <&cpg 906>; + }; + + avb: ethernet@e6800000 { + compatible = "renesas,etheravb-r8a77995", + "renesas,etheravb-rcar-gen3"; + reg = <0 0xe6800000 0 0x800>, <0 0xe6a00000 0 0x10000>; + interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "ch0", "ch1", "ch2", "ch3", + "ch4", "ch5", "ch6", "ch7", + "ch8", "ch9", "ch10", "ch11", + "ch12", "ch13", "ch14", "ch15", + "ch16", "ch17", "ch18", "ch19", + "ch20", "ch21", "ch22", "ch23", + "ch24"; + clocks = <&cpg CPG_MOD 812>; + power-domains = <&sysc R8A77995_PD_ALWAYS_ON>; + resets = <&cpg 812>; + phy-mode = "rgmii-txid"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + scif2: serial@e6e88000 { compatible = "renesas,scif-r8a77995", "renesas,rcar-gen3-scif", "renesas,scif"; reg = <0 0xe6e88000 0 64>; interrupts = <GIC_SPI 164 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cpg CPG_MOD 310>, - <&cpg CPG_CORE 16>, + <&cpg CPG_CORE R8A77995_CLK_S3D1C>, <&scif_clk>; clock-names = "fck", "brg_int", "scif_clk"; - power-domains = <&sysc 32>; + power-domains = <&sysc R8A77995_PD_ALWAYS_ON>; resets = <&cpg 310>; status = "disabled"; }; + + pwm0: pwm@e6e30000 { + compatible = "renesas,pwm-r8a77995", "renesas,pwm-rcar"; + reg = <0 0xe6e30000 0 0x8>; + #pwm-cells = <2>; + clocks = <&cpg CPG_MOD 523>; + power-domains = <&sysc R8A77995_PD_ALWAYS_ON>; + resets = <&cpg 523>; + status = "disabled"; + }; + + pwm1: pwm@e6e31000 { + compatible = "renesas,pwm-r8a77995", "renesas,pwm-rcar"; + reg = <0 0xe6e31000 0 0x8>; + #pwm-cells = <2>; + clocks = <&cpg CPG_MOD 523>; + power-domains = <&sysc R8A77995_PD_ALWAYS_ON>; + resets = <&cpg 523>; + status = "disabled"; + }; + + pwm2: pwm@e6e32000 { + compatible = "renesas,pwm-r8a77995", "renesas,pwm-rcar"; + reg = <0 0xe6e32000 0 0x8>; + #pwm-cells = <2>; + clocks = <&cpg CPG_MOD 523>; + power-domains = <&sysc R8A77995_PD_ALWAYS_ON>; + resets = <&cpg 523>; + status = "disabled"; + }; + + pwm3: pwm@e6e33000 { + compatible = "renesas,pwm-r8a77995", "renesas,pwm-rcar"; + reg = <0 0xe6e33000 0 0x8>; + #pwm-cells = <2>; + clocks = <&cpg CPG_MOD 523>; + power-domains = <&sysc R8A77995_PD_ALWAYS_ON>; + resets = <&cpg 523>; + status = "disabled"; + }; + + ehci0: usb@ee080100 { + compatible = "generic-ehci"; + reg = <0 0xee080100 0 0x100>; + interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 703>; + phys = <&usb2_phy0>; + phy-names = "usb"; + companion = <&ohci0>; + power-domains = <&sysc R8A77995_PD_ALWAYS_ON>; + resets = <&cpg 703>; + status = "disabled"; + }; + + ohci0: usb@ee080000 { + compatible = "generic-ohci"; + reg = <0 0xee080000 0 0x100>; + interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 703>; + phys = <&usb2_phy0>; + phy-names = "usb"; + power-domains = <&sysc R8A77995_PD_ALWAYS_ON>; + resets = <&cpg 703>; + status = "disabled"; + }; + + usb2_phy0: usb-phy@ee080200 { + compatible = "renesas,usb2-phy-r8a77995", + "renesas,rcar-gen3-usb2-phy"; + reg = <0 0xee080200 0 0x700>; + interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 703>; + power-domains = <&sysc R8A77995_PD_ALWAYS_ON>; + resets = <&cpg 703>; + #phy-cells = <0>; + status = "disabled"; + }; }; }; diff --git a/arch/arm64/boot/dts/renesas/salvator-common.dtsi b/arch/arm64/boot/dts/renesas/salvator-common.dtsi index d9d885006a8e..a298df74ca6c 100644 --- a/arch/arm64/boot/dts/renesas/salvator-common.dtsi +++ b/arch/arm64/boot/dts/renesas/salvator-common.dtsi @@ -52,7 +52,7 @@ */ compatible = "fixed-clock"; #clock-cells = <0>; - clock-frequency = <11289600>; + clock-frequency = <12288000>; }; backlight: backlight { @@ -282,6 +282,7 @@ }; &ehci0 { + dr_mode = "otg"; status = "okay"; }; @@ -294,6 +295,7 @@ }; &hsusb { + dr_mode = "otg"; status = "okay"; }; @@ -356,6 +358,7 @@ }; &ohci0 { + dr_mode = "otg"; status = "okay"; }; @@ -381,8 +384,7 @@ avb_pins: avb { mux { - groups = "avb_link", "avb_phy_int", "avb_mdc", - "avb_mii"; + groups = "avb_link", "avb_mdc", "avb_mii"; function = "avb"; }; @@ -496,6 +498,11 @@ bias-pull-down; }; }; + + usb30_pins: usb30 { + groups = "usb30"; + function = "usb30"; + }; }; &pwm1 { @@ -631,5 +638,8 @@ }; &xhci0 { + pinctrl-0 = <&usb30_pins>; + pinctrl-names = "default"; + status = "okay"; }; diff --git a/arch/arm64/boot/dts/renesas/ulcb-kf.dtsi b/arch/arm64/boot/dts/renesas/ulcb-kf.dtsi new file mode 100644 index 000000000000..657ad1041965 --- /dev/null +++ b/arch/arm64/boot/dts/renesas/ulcb-kf.dtsi @@ -0,0 +1,169 @@ +/* + * Device Tree Source for the Kingfisher (ULCB extension) board + * + * Copyright (C) 2017 Renesas Electronics Corp. + * Copyright (C) 2017 Cogent Embedded, Inc. + * + * This file is licensed under the terms of the GNU General Public License + * version 2. This program is licensed "as is" without any warranty of any + * kind, whether express or implied. + */ + +/ { + aliases { + serial1 = &hscif0; + serial2 = &scif1; + }; +}; + +&can0 { + pinctrl-0 = <&can0_pins>; + pinctrl-names = "default"; + status = "okay"; +}; + +&can1 { + pinctrl-0 = <&can1_pins>; + pinctrl-names = "default"; + status = "okay"; +}; + +&ehci0 { + status = "okay"; +}; + +&hscif0 { + pinctrl-0 = <&hscif0_pins>; + pinctrl-names = "default"; + uart-has-rtscts; + + status = "okay"; +}; + +&hsusb { + status = "okay"; +}; + +&i2c2 { + gpio_exp_74: gpio@74 { + compatible = "ti,tca9539"; + reg = <0x74>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + interrupt-parent = <&gpio6>; + interrupts = <8 IRQ_TYPE_EDGE_FALLING>; + + hub_pwen { + gpio-hog; + gpios = <6 GPIO_ACTIVE_HIGH>; + output-high; + line-name = "HUB pwen"; + }; + + hub_rst { + gpio-hog; + gpios = <7 GPIO_ACTIVE_HIGH>; + output-high; + line-name = "HUB rst"; + }; + }; + + gpio_exp_75: gpio@75 { + compatible = "ti,tca9539"; + reg = <0x75>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + interrupt-parent = <&gpio6>; + interrupts = <4 IRQ_TYPE_EDGE_FALLING>; + }; + + i2cswitch2: i2c-switch@71 { + compatible = "nxp,pca9548"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x71>; + reset-gpios = <&gpio5 3 GPIO_ACTIVE_LOW>; + }; +}; + +&i2c4 { + gpio_exp_76: gpio@76 { + compatible = "ti,tca9539"; + reg = <0x76>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + interrupt-parent = <&gpio7>; + interrupts = <3 IRQ_TYPE_EDGE_FALLING>; + }; + + gpio_exp_77: gpio@77 { + compatible = "ti,tca9539"; + reg = <0x77>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + interrupt-parent = <&gpio5>; + interrupts = <9 IRQ_TYPE_EDGE_FALLING>; + }; + + i2cswitch4: i2c-switch@71 { + compatible = "nxp,pca9548"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x71>; + reset-gpios= <&gpio3 15 GPIO_ACTIVE_LOW>; + }; +}; + +&ohci0 { + status = "okay"; +}; + +&pcie_bus_clk { + clock-frequency = <100000000>; +}; + +&pciec0 { + status = "okay"; +}; + +&pciec1 { + status = "okay"; +}; + +&pfc { + can0_pins: can0 { + groups = "can0_data_a"; + function = "can0"; + }; + + can1_pins: can1 { + groups = "can1_data"; + function = "can1"; + }; + + hscif0_pins: hscif0 { + groups = "hscif0_data", "hscif0_ctrl"; + function = "hscif0"; + }; + + scif1_pins: scif1 { + groups = "scif1_data_b", "scif1_ctrl"; + function = "scif1"; + }; +}; + +&scif1 { + pinctrl-0 = <&scif1_pins>; + pinctrl-names = "default"; + uart-has-rtscts; + + status = "okay"; +}; + +&xhci0 { + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/renesas/ulcb.dtsi b/arch/arm64/boot/dts/renesas/ulcb.dtsi index 1b868df2393f..0d85b315ce71 100644 --- a/arch/arm64/boot/dts/renesas/ulcb.dtsi +++ b/arch/arm64/boot/dts/renesas/ulcb.dtsi @@ -31,7 +31,7 @@ */ compatible = "fixed-clock"; #clock-cells = <0>; - clock-frequency = <11289600>; + clock-frequency = <12288000>; }; hdmi0-out { @@ -157,6 +157,10 @@ }; }; +&du { + status = "okay"; +}; + &ehci1 { status = "okay"; }; @@ -250,8 +254,7 @@ avb_pins: avb { mux { - groups = "avb_link", "avb_phy_int", "avb_mdc", - "avb_mii"; + groups = "avb_link", "avb_mdc", "avb_mii"; function = "avb"; }; diff --git a/arch/arm64/boot/dts/rockchip/rk3328-evb.dts b/arch/arm64/boot/dts/rockchip/rk3328-evb.dts index 8e6a65431756..3d551e3e6c23 100644 --- a/arch/arm64/boot/dts/rockchip/rk3328-evb.dts +++ b/arch/arm64/boot/dts/rockchip/rk3328-evb.dts @@ -60,6 +60,31 @@ regulator-max-microvolt = <12000000>; }; + sdio_pwrseq: sdio-pwrseq { + compatible = "mmc-pwrseq-simple"; + pinctrl-names = "default"; + pinctrl-0 = <&wifi_enable_h>; + + /* + * On the module itself this is one of these (depending + * on the actual card populated): + * - SDIO_RESET_L_WL_REG_ON + * - PDN (power down when low) + */ + reset-gpios = <&gpio1 18 GPIO_ACTIVE_LOW>; + }; + + vcc_sd: sdmmc-regulator { + compatible = "regulator-fixed"; + gpio = <&gpio0 30 GPIO_ACTIVE_LOW>; + pinctrl-names = "default"; + pinctrl-0 = <&sdmmc0m1_gpio>; + regulator-name = "vcc_sd"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + vin-supply = <&vcc_io>; + }; + vcc_sys: vcc-sys { compatible = "regulator-fixed"; regulator-name = "vcc_sys"; @@ -78,6 +103,19 @@ }; }; +&cpu0 { + cpu-supply = <&vdd_arm>; +}; + +&emmc { + bus-width = <8>; + cap-mmc-highspeed; + non-removable; + pinctrl-names = "default"; + pinctrl-0 = <&emmc_clk &emmc_cmd &emmc_bus8>; + status = "okay"; +}; + &gmac2phy { phy-supply = <&vcc_phy>; clock_in_out = "output"; @@ -85,7 +123,7 @@ assigned-clock-rate = <50000000>; assigned-clocks = <&cru SCLK_MAC2PHY>; assigned-clock-parents = <&cru SCLK_MAC2PHY_SRC>; - status = "okay"; + }; &i2c1 { @@ -203,6 +241,38 @@ rockchip,pins = <2 RK_PA6 RK_FUNC_GPIO &pcfg_pull_up>; }; }; + + sdio-pwrseq { + wifi_enable_h: wifi-enable-h { + rockchip,pins = + <1 18 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; +}; + +&sdio { + bus-width = <4>; + cap-sd-highspeed; + cap-sdio-irq; + keep-power-in-suspend; + max-frequency = <150000000>; + mmc-pwrseq = <&sdio_pwrseq>; + non-removable; + pinctrl-names = "default"; + pinctrl-0 = <&sdmmc1_bus4 &sdmmc1_cmd &sdmmc1_clk>; + status = "okay"; +}; + +&sdmmc { + bus-width = <4>; + cap-mmc-highspeed; + cap-sd-highspeed; + disable-wp; + max-frequency = <150000000>; + pinctrl-names = "default"; + pinctrl-0 = <&sdmmc0_clk &sdmmc0_cmd &sdmmc0_dectn &sdmmc0_bus4>; + vmmc-supply = <&vcc_sd>; + status = "okay"; }; &tsadc { diff --git a/arch/arm64/boot/dts/rockchip/rk3368.dtsi b/arch/arm64/boot/dts/rockchip/rk3368.dtsi index 1070c8264c13..aa4d07046a7b 100644 --- a/arch/arm64/boot/dts/rockchip/rk3368.dtsi +++ b/arch/arm64/boot/dts/rockchip/rk3368.dtsi @@ -786,6 +786,22 @@ status = "disabled"; }; + efuse256: efuse@ffb00000 { + compatible = "rockchip,rk3368-efuse"; + reg = <0x0 0xffb00000 0x0 0x20>; + #address-cells = <1>; + #size-cells = <1>; + clocks = <&cru PCLK_EFUSE256>; + clock-names = "pclk_efuse"; + + cpu_leakage: cpu-leakage@17 { + reg = <0x17 0x1>; + }; + temp_adjust: temp-adjust@1f { + reg = <0x1f 0x1>; + }; + }; + gic: interrupt-controller@ffb71000 { compatible = "arm,gic-400"; interrupt-controller; diff --git a/arch/arm64/boot/dts/rockchip/rk3399-firefly.dts b/arch/arm64/boot/dts/rockchip/rk3399-firefly.dts index fef82274a39d..4f28628aa091 100644 --- a/arch/arm64/boot/dts/rockchip/rk3399-firefly.dts +++ b/arch/arm64/boot/dts/rockchip/rk3399-firefly.dts @@ -49,6 +49,10 @@ model = "Firefly-RK3399 Board"; compatible = "firefly,firefly-rk3399", "rockchip,rk3399"; + chosen { + stdout-path = "serial2:1500000n8"; + }; + backlight: backlight { compatible = "pwm-backlight"; enable-gpios = <&gpio1 RK_PB5 GPIO_ACTIVE_HIGH>; @@ -255,6 +259,13 @@ status = "okay"; }; +&hdmi { + ddc-i2c-bus = <&i2c3>; + pinctrl-names = "default"; + pinctrl-0 = <&hdmi_cec>; + status = "okay"; +}; + &i2c0 { clock-frequency = <400000>; i2c-scl-rising-time-ns = <168>; @@ -728,3 +739,19 @@ status = "okay"; dr_mode = "host"; }; + +&vopb { + status = "okay"; +}; + +&vopb_mmu { + status = "okay"; +}; + +&vopl { + status = "okay"; +}; + +&vopl_mmu { + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/rockchip/rk3399-gru-kevin.dts b/arch/arm64/boot/dts/rockchip/rk3399-gru-kevin.dts index a3d3cea7dc4f..0384e3121f18 100644 --- a/arch/arm64/boot/dts/rockchip/rk3399-gru-kevin.dts +++ b/arch/arm64/boot/dts/rockchip/rk3399-gru-kevin.dts @@ -249,6 +249,10 @@ ap_i2c_dig: &i2c2 { pinctrl-0 = <&trackpad_int_l>; interrupt-parent = <&gpio1>; interrupts = <4 IRQ_TYPE_LEVEL_LOW>; + linux,gpio-keymap = <KEY_RESERVED + KEY_RESERVED + KEY_RESERVED + BTN_LEFT>; wakeup-source; }; }; diff --git a/arch/arm64/boot/dts/rockchip/rk3399-gru.dtsi b/arch/arm64/boot/dts/rockchip/rk3399-gru.dtsi index 199a5118b20d..5772c52fbfd3 100644 --- a/arch/arm64/boot/dts/rockchip/rk3399-gru.dtsi +++ b/arch/arm64/boot/dts/rockchip/rk3399-gru.dtsi @@ -514,7 +514,8 @@ sound { compatible = "rockchip,rk3399-gru-sound"; rockchip,cpu = <&i2s0 &i2s2>; - rockchip,codec = <&max98357a &headsetcodec &codec>; + rockchip,codec = <&max98357a &headsetcodec + &codec &wacky_spi_audio>; }; }; diff --git a/arch/arm64/boot/dts/rockchip/rk3399.dtsi b/arch/arm64/boot/dts/rockchip/rk3399.dtsi index ab7629c5b856..d340b58ab184 100644 --- a/arch/arm64/boot/dts/rockchip/rk3399.dtsi +++ b/arch/arm64/boot/dts/rockchip/rk3399.dtsi @@ -1204,6 +1204,17 @@ status = "disabled"; }; + rga: rga@ff680000 { + compatible = "rockchip,rk3399-rga"; + reg = <0x0 0xff680000 0x0 0x10000>; + interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH 0>; + clocks = <&cru ACLK_RGA>, <&cru HCLK_RGA>, <&cru SCLK_RGA_CORE>; + clock-names = "aclk", "hclk", "sclk"; + resets = <&cru SRST_RGA_CORE>, <&cru SRST_A_RGA>, <&cru SRST_H_RGA>; + reset-names = "core", "axi", "ahb"; + power-domains = <&power RK3399_PD_RGA>; + }; + efuse0: efuse@ff690000 { compatible = "rockchip,rk3399-efuse"; reg = <0x0 0xff690000 0x0 0x80>; @@ -1601,8 +1612,12 @@ compatible = "rockchip,rk3399-dw-hdmi"; reg = <0x0 0xff940000 0x0 0x20000>; interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH 0>; - clocks = <&cru PCLK_HDMI_CTRL>, <&cru SCLK_HDMI_SFR>, <&cru PLL_VPLL>, <&cru PCLK_VIO_GRF>; - clock-names = "iahb", "isfr", "vpll", "grf"; + clocks = <&cru PCLK_HDMI_CTRL>, + <&cru SCLK_HDMI_SFR>, + <&cru PLL_VPLL>, + <&cru PCLK_VIO_GRF>, + <&cru SCLK_HDMI_CEC>; + clock-names = "iahb", "isfr", "vpll", "grf", "cec"; power-domains = <&power RK3399_PD_HDCP>; reg-io-width = <4>; rockchip,grf = <&grf>; diff --git a/arch/arm64/boot/dts/socionext/uniphier-ld11-ref.dts b/arch/arm64/boot/dts/socionext/uniphier-ld11-ref.dts index ffb473ad2e0f..dd7193acc7df 100644 --- a/arch/arm64/boot/dts/socionext/uniphier-ld11-ref.dts +++ b/arch/arm64/boot/dts/socionext/uniphier-ld11-ref.dts @@ -40,13 +40,22 @@ }; ðsc { - interrupts = <0 48 4>; + interrupt-parent = <&gpio>; + interrupts = <0 8>; }; &serial0 { status = "okay"; }; +&gpio { + xirq0 { + gpio-hog; + gpios = <120 0>; + input; + }; +}; + &i2c0 { status = "okay"; }; diff --git a/arch/arm64/boot/dts/socionext/uniphier-ld11.dtsi b/arch/arm64/boot/dts/socionext/uniphier-ld11.dtsi index 09c429cb6d61..1c63d0ab8a58 100644 --- a/arch/arm64/boot/dts/socionext/uniphier-ld11.dtsi +++ b/arch/arm64/boot/dts/socionext/uniphier-ld11.dtsi @@ -7,6 +7,8 @@ * SPDX-License-Identifier: (GPL-2.0+ OR MIT) */ +#include <dt-bindings/gpio/gpio.h> + /memreserve/ 0x80000000 0x02000000; / { @@ -49,7 +51,7 @@ }; }; - cluster0_opp: opp_table { + cluster0_opp: opp-table { compatible = "operating-points-v2"; opp-shared; @@ -96,6 +98,11 @@ }; }; + emmc_pwrseq: emmc-pwrseq { + compatible = "mmc-pwrseq-emmc"; + reset-gpios = <&gpio 26 GPIO_ACTIVE_LOW>; + }; + timer { compatible = "arm,armv8-timer"; interrupts = <1 13 4>, @@ -118,6 +125,7 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_uart0>; clocks = <&peri_clk 0>; + resets = <&peri_rst 0>; }; serial1: serial@54006900 { @@ -128,6 +136,7 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_uart1>; clocks = <&peri_clk 1>; + resets = <&peri_rst 1>; }; serial2: serial@54006a00 { @@ -138,6 +147,7 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_uart2>; clocks = <&peri_clk 2>; + resets = <&peri_rst 2>; }; serial3: serial@54006b00 { @@ -148,6 +158,32 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_uart3>; clocks = <&peri_clk 3>; + resets = <&peri_rst 3>; + }; + + gpio: gpio@55000000 { + compatible = "socionext,uniphier-gpio"; + reg = <0x55000000 0x200>; + interrupt-parent = <&aidet>; + interrupt-controller; + #interrupt-cells = <2>; + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = <&pinctrl 0 0 0>, + <&pinctrl 43 0 0>, + <&pinctrl 51 0 0>, + <&pinctrl 96 0 0>, + <&pinctrl 160 0 0>, + <&pinctrl 184 0 0>; + gpio-ranges-group-names = "gpio_range0", + "gpio_range1", + "gpio_range2", + "gpio_range3", + "gpio_range4", + "gpio_range5"; + ngpios = <200>; + socionext,interrupt-ranges = <0 48 16>, <16 154 5>, + <21 217 3>; }; adamv@57920000 { @@ -171,6 +207,7 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_i2c0>; clocks = <&peri_clk 4>; + resets = <&peri_rst 4>; clock-frequency = <100000>; }; @@ -184,6 +221,7 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_i2c1>; clocks = <&peri_clk 5>; + resets = <&peri_rst 5>; clock-frequency = <100000>; }; @@ -194,6 +232,7 @@ #size-cells = <0>; interrupts = <0 43 4>; clocks = <&peri_clk 6>; + resets = <&peri_rst 6>; clock-frequency = <400000>; }; @@ -207,6 +246,7 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_i2c3>; clocks = <&peri_clk 7>; + resets = <&peri_rst 7>; clock-frequency = <100000>; }; @@ -220,6 +260,7 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_i2c4>; clocks = <&peri_clk 8>; + resets = <&peri_rst 8>; clock-frequency = <100000>; }; @@ -230,6 +271,7 @@ #size-cells = <0>; interrupts = <0 25 4>; clocks = <&peri_clk 9>; + resets = <&peri_rst 9>; clock-frequency = <400000>; }; @@ -282,9 +324,11 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_emmc>; clocks = <&sys_clk 4>; + resets = <&sys_rst 4>; bus-width = <8>; mmc-ddr-1_8v; mmc-hs200-1_8v; + mmc-pwrseq = <&emmc_pwrseq>; cdns,phy-input-delay-legacy = <4>; cdns,phy-input-delay-mmc-highspeed = <2>; cdns,phy-input-delay-mmc-ddr = <3>; @@ -358,6 +402,24 @@ }; }; + soc-glue@5f900000 { + compatible = "socionext,uniphier-ld11-soc-glue-debug", + "simple-mfd"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x5f900000 0x2000>; + + efuse@100 { + compatible = "socionext,uniphier-efuse"; + reg = <0x100 0x28>; + }; + + efuse@200 { + compatible = "socionext,uniphier-efuse"; + reg = <0x200 0x68>; + }; + }; + aidet: aidet@5fc20000 { compatible = "socionext,uniphier-ld11-aidet"; reg = <0x5fc20000 0x200>; @@ -403,6 +465,7 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_nand>; clocks = <&sys_clk 2>; + resets = <&sys_rst 2>; }; }; }; diff --git a/arch/arm64/boot/dts/socionext/uniphier-ld20-ref.dts b/arch/arm64/boot/dts/socionext/uniphier-ld20-ref.dts index 1ca0c8620dc5..d99e3731358c 100644 --- a/arch/arm64/boot/dts/socionext/uniphier-ld20-ref.dts +++ b/arch/arm64/boot/dts/socionext/uniphier-ld20-ref.dts @@ -40,13 +40,22 @@ }; ðsc { - interrupts = <0 48 4>; + interrupt-parent = <&gpio>; + interrupts = <0 8>; }; &serial0 { status = "okay"; }; +&gpio { + xirq0 { + gpio-hog; + gpios = <120 0>; + input; + }; +}; + &i2c0 { status = "okay"; }; diff --git a/arch/arm64/boot/dts/socionext/uniphier-ld20.dtsi b/arch/arm64/boot/dts/socionext/uniphier-ld20.dtsi index a29c279b6e8e..5c81070944cc 100644 --- a/arch/arm64/boot/dts/socionext/uniphier-ld20.dtsi +++ b/arch/arm64/boot/dts/socionext/uniphier-ld20.dtsi @@ -7,6 +7,9 @@ * SPDX-License-Identifier: (GPL-2.0+ OR MIT) */ +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/thermal/thermal.h> + /memreserve/ 0x80000000 0x02000000; / { @@ -46,6 +49,7 @@ clocks = <&sys_clk 32>; enable-method = "psci"; operating-points-v2 = <&cluster0_opp>; + #cooling-cells = <2>; }; cpu1: cpu@1 { @@ -64,6 +68,7 @@ clocks = <&sys_clk 33>; enable-method = "psci"; operating-points-v2 = <&cluster1_opp>; + #cooling-cells = <2>; }; cpu3: cpu@101 { @@ -76,7 +81,7 @@ }; }; - cluster0_opp: opp_table0 { + cluster0_opp: opp-table0 { compatible = "operating-points-v2"; opp-shared; @@ -114,7 +119,7 @@ }; }; - cluster1_opp: opp_table1 { + cluster1_opp: opp-table1 { compatible = "operating-points-v2"; opp-shared; @@ -165,6 +170,11 @@ }; }; + emmc_pwrseq: emmc-pwrseq { + compatible = "mmc-pwrseq-emmc"; + reset-gpios = <&gpio 26 GPIO_ACTIVE_LOW>; + }; + timer { compatible = "arm,armv8-timer"; interrupts = <1 13 4>, @@ -173,6 +183,40 @@ <1 10 4>; }; + thermal-zones { + cpu-thermal { + polling-delay-passive = <250>; /* 250ms */ + polling-delay = <1000>; /* 1000ms */ + thermal-sensors = <&pvtctl>; + + trips { + cpu_crit: cpu-crit { + temperature = <110000>; /* 110C */ + hysteresis = <2000>; + type = "critical"; + }; + cpu_alert: cpu-alert { + temperature = <100000>; /* 100C */ + hysteresis = <2000>; + type = "passive"; + }; + }; + + cooling-maps { + map0 { + trip = <&cpu_alert>; + cooling-device = <&cpu0 + THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + map1 { + trip = <&cpu_alert>; + cooling-device = <&cpu2 + THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; + }; + }; + soc@0 { compatible = "simple-bus"; #address-cells = <1>; @@ -187,6 +231,7 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_uart0>; clocks = <&peri_clk 0>; + resets = <&peri_rst 0>; }; serial1: serial@54006900 { @@ -197,6 +242,7 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_uart1>; clocks = <&peri_clk 1>; + resets = <&peri_rst 1>; }; serial2: serial@54006a00 { @@ -207,6 +253,7 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_uart2>; clocks = <&peri_clk 2>; + resets = <&peri_rst 2>; }; serial3: serial@54006b00 { @@ -217,6 +264,26 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_uart3>; clocks = <&peri_clk 3>; + resets = <&peri_rst 3>; + }; + + gpio: gpio@55000000 { + compatible = "socionext,uniphier-gpio"; + reg = <0x55000000 0x200>; + interrupt-parent = <&aidet>; + interrupt-controller; + #interrupt-cells = <2>; + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = <&pinctrl 0 0 0>, + <&pinctrl 96 0 0>, + <&pinctrl 160 0 0>; + gpio-ranges-group-names = "gpio_range0", + "gpio_range1", + "gpio_range2"; + ngpios = <205>; + socionext,interrupt-ranges = <0 48 16>, <16 154 5>, + <21 217 3>; }; adamv@57920000 { @@ -240,6 +307,7 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_i2c0>; clocks = <&peri_clk 4>; + resets = <&peri_rst 4>; clock-frequency = <100000>; }; @@ -253,6 +321,7 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_i2c1>; clocks = <&peri_clk 5>; + resets = <&peri_rst 5>; clock-frequency = <100000>; }; @@ -263,6 +332,7 @@ #size-cells = <0>; interrupts = <0 43 4>; clocks = <&peri_clk 6>; + resets = <&peri_rst 6>; clock-frequency = <400000>; }; @@ -276,6 +346,7 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_i2c3>; clocks = <&peri_clk 7>; + resets = <&peri_rst 7>; clock-frequency = <100000>; }; @@ -289,6 +360,7 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_i2c4>; clocks = <&peri_clk 8>; + resets = <&peri_rst 8>; clock-frequency = <100000>; }; @@ -299,6 +371,7 @@ #size-cells = <0>; interrupts = <0 25 4>; clocks = <&peri_clk 9>; + resets = <&peri_rst 9>; clock-frequency = <400000>; }; @@ -356,9 +429,11 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_emmc>; clocks = <&sys_clk 4>; + resets = <&sys_rst 4>; bus-width = <8>; mmc-ddr-1_8v; mmc-hs200-1_8v; + mmc-pwrseq = <&emmc_pwrseq>; cdns,phy-input-delay-legacy = <4>; cdns,phy-input-delay-mmc-highspeed = <2>; cdns,phy-input-delay-mmc-ddr = <3>; @@ -376,6 +451,24 @@ }; }; + soc-glue@5f900000 { + compatible = "socionext,uniphier-ld20-soc-glue-debug", + "simple-mfd"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x5f900000 0x2000>; + + efuse@100 { + compatible = "socionext,uniphier-efuse"; + reg = <0x100 0x28>; + }; + + efuse@200 { + compatible = "socionext,uniphier-efuse"; + reg = <0x200 0x68>; + }; + }; + aidet: aidet@5fc20000 { compatible = "socionext,uniphier-ld20-aidet"; reg = <0x5fc20000 0x200>; @@ -410,6 +503,13 @@ watchdog { compatible = "socionext,uniphier-wdt"; }; + + pvtctl: pvtctl { + compatible = "socionext,uniphier-ld20-thermal"; + interrupts = <0 3 4>; + #thermal-sensor-cells = <0>; + socionext,tmod-calibration = <0x0f22 0x68ee>; + }; }; nand: nand@68000000 { @@ -421,6 +521,7 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_nand>; clocks = <&sys_clk 2>; + resets = <&sys_rst 2>; }; }; }; diff --git a/arch/arm64/boot/dts/socionext/uniphier-pxs3-ref.dts b/arch/arm64/boot/dts/socionext/uniphier-pxs3-ref.dts index d65f746a3f9d..864feeb35180 100644 --- a/arch/arm64/boot/dts/socionext/uniphier-pxs3-ref.dts +++ b/arch/arm64/boot/dts/socionext/uniphier-pxs3-ref.dts @@ -38,7 +38,8 @@ }; ðsc { - interrupts = <0 52 4>; + interrupt-parent = <&gpio>; + interrupts = <0 8>; }; &serial0 { @@ -60,3 +61,7 @@ &i2c3 { status = "okay"; }; + +&nand { + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/socionext/uniphier-pxs3.dtsi b/arch/arm64/boot/dts/socionext/uniphier-pxs3.dtsi index 384729fa740f..48e733136db4 100644 --- a/arch/arm64/boot/dts/socionext/uniphier-pxs3.dtsi +++ b/arch/arm64/boot/dts/socionext/uniphier-pxs3.dtsi @@ -7,6 +7,8 @@ * SPDX-License-Identifier: (GPL-2.0+ OR MIT) */ +#include <dt-bindings/gpio/gpio.h> + /memreserve/ 0x80000000 0x02000000; / { @@ -73,7 +75,7 @@ }; }; - cluster0_opp: opp_table { + cluster0_opp: opp-table { compatible = "operating-points-v2"; opp-shared; @@ -124,6 +126,11 @@ }; }; + emmc_pwrseq: emmc-pwrseq { + compatible = "mmc-pwrseq-emmc"; + reset-gpios = <&gpio 47 GPIO_ACTIVE_LOW>; + }; + timer { compatible = "arm,armv8-timer"; interrupts = <1 13 4>, @@ -146,6 +153,7 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_uart0>; clocks = <&peri_clk 0>; + resets = <&peri_rst 0>; }; serial1: serial@54006900 { @@ -156,6 +164,7 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_uart1>; clocks = <&peri_clk 1>; + resets = <&peri_rst 1>; }; serial2: serial@54006a00 { @@ -166,6 +175,7 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_uart2>; clocks = <&peri_clk 2>; + resets = <&peri_rst 2>; }; serial3: serial@54006b00 { @@ -176,6 +186,26 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_uart3>; clocks = <&peri_clk 3>; + resets = <&peri_rst 3>; + }; + + gpio: gpio@55000000 { + compatible = "socionext,uniphier-gpio"; + reg = <0x55000000 0x200>; + interrupt-parent = <&aidet>; + interrupt-controller; + #interrupt-cells = <2>; + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = <&pinctrl 0 0 0>, + <&pinctrl 96 0 0>, + <&pinctrl 160 0 0>; + gpio-ranges-group-names = "gpio_range0", + "gpio_range1", + "gpio_range2"; + ngpios = <286>; + socionext,interrupt-ranges = <0 48 16>, <16 154 5>, + <21 217 3>; }; i2c0: i2c@58780000 { @@ -188,6 +218,7 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_i2c0>; clocks = <&peri_clk 4>; + resets = <&peri_rst 4>; clock-frequency = <100000>; }; @@ -201,6 +232,7 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_i2c1>; clocks = <&peri_clk 5>; + resets = <&peri_rst 5>; clock-frequency = <100000>; }; @@ -214,6 +246,7 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_i2c2>; clocks = <&peri_clk 6>; + resets = <&peri_rst 6>; clock-frequency = <100000>; }; @@ -227,6 +260,7 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_i2c3>; clocks = <&peri_clk 7>; + resets = <&peri_rst 7>; clock-frequency = <100000>; }; @@ -238,6 +272,7 @@ #size-cells = <0>; interrupts = <0 26 4>; clocks = <&peri_clk 10>; + resets = <&peri_rst 10>; clock-frequency = <400000>; }; @@ -295,9 +330,11 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_emmc>; clocks = <&sys_clk 4>; + resets = <&sys_rst 4>; bus-width = <8>; mmc-ddr-1_8v; mmc-hs200-1_8v; + mmc-pwrseq = <&emmc_pwrseq>; cdns,phy-input-delay-legacy = <4>; cdns,phy-input-delay-mmc-highspeed = <2>; cdns,phy-input-delay-mmc-ddr = <3>; @@ -315,6 +352,24 @@ }; }; + soc-glue@5f900000 { + compatible = "socionext,uniphier-pxs3-soc-glue-debug", + "simple-mfd"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x5f900000 0x2000>; + + efuse@100 { + compatible = "socionext,uniphier-efuse"; + reg = <0x100 0x28>; + }; + + efuse@200 { + compatible = "socionext,uniphier-efuse"; + reg = <0x200 0x68>; + }; + }; + aidet: aidet@5fc20000 { compatible = "socionext,uniphier-pxs3-aidet"; reg = <0x5fc20000 0x200>; @@ -360,6 +415,7 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_nand>; clocks = <&sys_clk 2>; + resets = <&sys_rst 2>; }; }; }; |