diff options
Diffstat (limited to 'arch/arm64/boot')
272 files changed, 28644 insertions, 2755 deletions
diff --git a/arch/arm64/boot/dts/Makefile b/arch/arm64/boot/dts/Makefile index 639e01a4d855..1ba04e31a438 100644 --- a/arch/arm64/boot/dts/Makefile +++ b/arch/arm64/boot/dts/Makefile @@ -27,6 +27,7 @@ subdir-y += rockchip subdir-y += socionext subdir-y += sprd subdir-y += synaptics +subdir-y += tesla subdir-y += ti subdir-y += toshiba subdir-y += xilinx diff --git a/arch/arm64/boot/dts/altera/socfpga_stratix10.dtsi b/arch/arm64/boot/dts/altera/socfpga_stratix10.dtsi index 3ec301bd08a9..884bda106399 100644 --- a/arch/arm64/boot/dts/altera/socfpga_stratix10.dtsi +++ b/arch/arm64/boot/dts/altera/socfpga_stratix10.dtsi @@ -77,6 +77,16 @@ method = "smc"; }; + /* Local timer */ + timer { + compatible = "arm,armv8-timer"; + interrupts = <1 13 0xf08>, + <1 14 0xf08>, + <1 11 0xf08>, + <1 10 0xf08>; + interrupt-parent = <&intc>; + }; + intc: interrupt-controller@fffc1000 { compatible = "arm,gic-400", "arm,cortex-a15-gic"; #interrupt-cells = <3>; @@ -286,7 +296,7 @@ status = "disabled"; }; - mmc: dwmmc0@ff808000 { + mmc: mmc@ff808000 { #address-cells = <1>; #size-cells = <0>; compatible = "altr,socfpga-dw-mshc"; @@ -323,7 +333,7 @@ reg = <0xffe00000 0x100000>; }; - pdma: pdma@ffda0000 { + pdma: dma-controller@ffda0000 { compatible = "arm,pl330", "arm,primecell"; reg = <0xffda0000 0x1000>; interrupts = <0 81 4>, @@ -406,15 +416,6 @@ reg = <0xffd12000 0x228>; }; - /* Local timer */ - timer { - compatible = "arm,armv8-timer"; - interrupts = <1 13 0xf08>, - <1 14 0xf08>, - <1 11 0xf08>, - <1 10 0xf08>; - }; - timer0: timer0@ffc03000 { compatible = "snps,dw-apb-timer"; interrupts = <0 113 4>; @@ -484,6 +485,7 @@ resets = <&rst USB0_RESET>, <&rst USB0_OCP_RESET>; reset-names = "dwc2", "dwc2-ecc"; clocks = <&clkmgr STRATIX10_USB_CLK>; + clock-names = "otg"; iommus = <&smmu 6>; status = "disabled"; }; diff --git a/arch/arm64/boot/dts/altera/socfpga_stratix10_socdk.dts b/arch/arm64/boot/dts/altera/socfpga_stratix10_socdk.dts index 46e558ab7729..5159cd5771dc 100644 --- a/arch/arm64/boot/dts/altera/socfpga_stratix10_socdk.dts +++ b/arch/arm64/boot/dts/altera/socfpga_stratix10_socdk.dts @@ -7,6 +7,7 @@ / { model = "SoCFPGA Stratix 10 SoCDK"; + compatible = "altr,socfpga-stratix10-socdk", "altr,socfpga-stratix10"; aliases { serial0 = &uart0; @@ -43,7 +44,7 @@ reg = <0 0 0 0>; }; - ref_033v: 033-v-ref { + ref_033v: regulator-v-ref { compatible = "regulator-fixed"; regulator-name = "0.33V"; regulator-min-microvolt = <330000>; diff --git a/arch/arm64/boot/dts/altera/socfpga_stratix10_socdk_nand.dts b/arch/arm64/boot/dts/altera/socfpga_stratix10_socdk_nand.dts index bbc3db42d6e8..0ab676c639a1 100644 --- a/arch/arm64/boot/dts/altera/socfpga_stratix10_socdk_nand.dts +++ b/arch/arm64/boot/dts/altera/socfpga_stratix10_socdk_nand.dts @@ -7,6 +7,7 @@ / { model = "SoCFPGA Stratix 10 SoCDK"; + compatible = "altr,socfpga-stratix10-socdk", "altr,socfpga-stratix10"; aliases { serial0 = &uart0; @@ -43,7 +44,7 @@ reg = <0 0 0 0>; }; - ref_033v: 033-v-ref { + ref_033v: regulator-v-ref { compatible = "regulator-fixed"; regulator-name = "0.33V"; regulator-min-microvolt = <330000>; diff --git a/arch/arm64/boot/dts/amlogic/Makefile b/arch/arm64/boot/dts/amlogic/Makefile index 5148cd9e5146..0eec18678311 100644 --- a/arch/arm64/boot/dts/amlogic/Makefile +++ b/arch/arm64/boot/dts/amlogic/Makefile @@ -36,6 +36,7 @@ dtb-$(CONFIG_ARCH_MESON) += meson-gxl-s905d-p230.dtb dtb-$(CONFIG_ARCH_MESON) += meson-gxl-s905d-p231.dtb dtb-$(CONFIG_ARCH_MESON) += meson-gxl-s905d-phicomm-n1.dtb dtb-$(CONFIG_ARCH_MESON) += meson-gxl-s905d-sml5442tw.dtb +dtb-$(CONFIG_ARCH_MESON) += meson-gxl-s905d-vero4k-plus.dtb dtb-$(CONFIG_ARCH_MESON) += meson-gxl-s805x-p241.dtb dtb-$(CONFIG_ARCH_MESON) += meson-gxl-s905w-p281.dtb dtb-$(CONFIG_ARCH_MESON) += meson-gxl-s905w-tx3-mini.dtb @@ -51,9 +52,15 @@ dtb-$(CONFIG_ARCH_MESON) += meson-gxm-rbox-pro.dtb dtb-$(CONFIG_ARCH_MESON) += meson-gxm-s912-libretech-pc.dtb dtb-$(CONFIG_ARCH_MESON) += meson-gxm-vega-s96.dtb dtb-$(CONFIG_ARCH_MESON) += meson-gxm-wetek-core2.dtb +dtb-$(CONFIG_ARCH_MESON) += meson-sm1-a95xf3-air.dtb +dtb-$(CONFIG_ARCH_MESON) += meson-sm1-a95xf3-air-gbit.dtb dtb-$(CONFIG_ARCH_MESON) += meson-sm1-bananapi-m5.dtb +dtb-$(CONFIG_ARCH_MESON) += meson-sm1-h96-max.dtb dtb-$(CONFIG_ARCH_MESON) += meson-sm1-khadas-vim3l.dtb dtb-$(CONFIG_ARCH_MESON) += meson-sm1-odroid-c4.dtb dtb-$(CONFIG_ARCH_MESON) += meson-sm1-odroid-hc4.dtb dtb-$(CONFIG_ARCH_MESON) += meson-sm1-sei610.dtb +dtb-$(CONFIG_ARCH_MESON) += meson-sm1-x96-air.dtb +dtb-$(CONFIG_ARCH_MESON) += meson-sm1-x96-air-gbit.dtb dtb-$(CONFIG_ARCH_MESON) += meson-a1-ad401.dtb +dtb-$(CONFIG_ARCH_MESON) += meson-s4-s805x2-aq222.dtb diff --git a/arch/arm64/boot/dts/amlogic/meson-g12-common.dtsi b/arch/arm64/boot/dts/amlogic/meson-g12-common.dtsi index f84d4b489e0b..45947c1031c4 100644 --- a/arch/arm64/boot/dts/amlogic/meson-g12-common.dtsi +++ b/arch/arm64/boot/dts/amlogic/meson-g12-common.dtsi @@ -845,6 +845,22 @@ }; }; + pwm_f_z_pins: pwm-f-z { + mux { + groups = "pwm_f_z"; + function = "pwm_f"; + bias-disable; + }; + }; + + pwm_f_a_pins: pwm-f-a { + mux { + groups = "pwm_f_a"; + function = "pwm_f"; + bias-disable; + }; + }; + pwm_f_x_pins: pwm-f-x { mux { groups = "pwm_f_x"; @@ -1887,6 +1903,33 @@ }; }; + uart_ao_b_2_3_pins: uart-ao-b-2-3 { + mux { + groups = "uart_ao_b_tx_2", + "uart_ao_b_rx_3"; + function = "uart_ao_b"; + bias-disable; + }; + }; + + uart_ao_b_8_9_pins: uart-ao-b-8-9 { + mux { + groups = "uart_ao_b_tx_8", + "uart_ao_b_rx_9"; + function = "uart_ao_b"; + bias-disable; + }; + }; + + uart_ao_b_cts_rts_pins: uart-ao-b-cts-rts { + mux { + groups = "uart_ao_b_cts", + "uart_ao_b_rts"; + function = "uart_ao_b"; + bias-disable; + }; + }; + pwm_a_e_pins: pwm-a-e { mux { groups = "pwm_a_e"; diff --git a/arch/arm64/boot/dts/amlogic/meson-gxl-s905d-vero4k-plus.dts b/arch/arm64/boot/dts/amlogic/meson-gxl-s905d-vero4k-plus.dts new file mode 100644 index 000000000000..4b0ff707e21b --- /dev/null +++ b/arch/arm64/boot/dts/amlogic/meson-gxl-s905d-vero4k-plus.dts @@ -0,0 +1,117 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Author: Christian Hewitt <christianshewitt@gmail.com> + */ + +/dts-v1/; + +#include "meson-gxl-s905d.dtsi" +#include "meson-gx-p23x-q20x.dtsi" +#include <dt-bindings/input/input.h> +#include <dt-bindings/leds/common.h> + +/ { + compatible = "osmc,vero4k-plus", "amlogic,s905d", "amlogic,meson-gxl"; + model = "OSMC Vero 4K Plus"; + + gpio-keys-polled { + compatible = "gpio-keys-polled"; + #address-cells = <1>; + #size-cells = <0>; + poll-interval = <20>; + + button@0 { + label = "power"; + linux,code = <KEY_POWER>; + gpios = <&gpio_ao GPIOAO_2 GPIO_ACTIVE_HIGH>; + }; + }; + + leds { + compatible = "gpio-leds"; + + led-standby { + color = <LED_COLOR_ID_RED>; + function = LED_FUNCTION_POWER; + gpios = <&gpio_ao GPIOAO_9 GPIO_ACTIVE_LOW>; + default-state = "off"; + panic-indicator; + }; + }; +}; + +ðmac { + pinctrl-0 = <ð_pins>; + pinctrl-names = "default"; + + phy-mode = "rgmii-txid"; + phy-handle = <&external_phy>; + + amlogic,tx-delay-ns = <0>; +}; + +&external_mdio { + external_phy: ethernet-phy@0 { + /* Realtek RTL8211F (0x001cc916) */ + pinctrl-0 = <ð_phy_irq_pin>; + pinctrl-names = "default"; + + reg = <0>; + max-speed = <1000>; + + reset-assert-us = <10000>; + reset-deassert-us = <80000>; + reset-gpios = <&gpio GPIOZ_14 GPIO_ACTIVE_LOW>; + + interrupt-parent = <&gpio_intc>; + interrupts = <25 IRQ_TYPE_LEVEL_LOW>; + }; +}; + +&pinctrl_periphs { + /* Ensure the phy irq pin is properly configured as input */ + eth_phy_irq_pin: eth-phy-irq { + mux { + groups = "GPIOZ_15"; + function = "gpio_periphs"; + bias-disable; + output-disable; + }; + }; +}; + +&sd_emmc_a { + brcmf: wifi@1 { + reg = <1>; + compatible = "brcm,bcm4329-fmac"; + }; +}; + +&uart_A { + status = "okay"; + pinctrl-0 = <&uart_a_pins>, <&uart_a_cts_rts_pins>; + pinctrl-names = "default"; + uart-has-rtscts; + + bluetooth { + compatible = "brcm,bcm43438-bt"; + shutdown-gpios = <&gpio GPIOX_17 GPIO_ACTIVE_HIGH>; + max-speed = <2000000>; + clocks = <&wifi32k>; + clock-names = "lpo"; + }; +}; + +&usb { + dr_mode = "host"; +}; + +&usb2_phy0 { + /* HDMI_5V also supplies the USB VBUS */ + phy-supply = <&hdmi_5v>; +}; + +&usb2_phy0 { + /* HDMI_5V also supplies the USB VBUS */ + phy-supply = <&hdmi_5v>; +}; diff --git a/arch/arm64/boot/dts/amlogic/meson-s4-s805x2-aq222.dts b/arch/arm64/boot/dts/amlogic/meson-s4-s805x2-aq222.dts new file mode 100644 index 000000000000..8ffbcb2b1ac5 --- /dev/null +++ b/arch/arm64/boot/dts/amlogic/meson-s4-s805x2-aq222.dts @@ -0,0 +1,30 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (c) 2021 Amlogic, Inc. All rights reserved. + */ + +/dts-v1/; + +#include "meson-s4.dtsi" + +/ { + model = "Amlogic Meson S4 AQ222 Development Board"; + compatible = "amlogic,aq222", "amlogic,s4"; + interrupt-parent = <&gic>; + #address-cells = <2>; + #size-cells = <2>; + + aliases { + serial0 = &uart_B; + }; + + memory@0 { + device_type = "memory"; + reg = <0x0 0x0 0x0 0x40000000>; + }; + +}; + +&uart_B { + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/amlogic/meson-s4.dtsi b/arch/arm64/boot/dts/amlogic/meson-s4.dtsi new file mode 100644 index 000000000000..bf9ae1e1016b --- /dev/null +++ b/arch/arm64/boot/dts/amlogic/meson-s4.dtsi @@ -0,0 +1,99 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (c) 2021 Amlogic, Inc. All rights reserved. + */ + +#include <dt-bindings/interrupt-controller/irq.h> +#include <dt-bindings/interrupt-controller/arm-gic.h> + +/ { + cpus { + #address-cells = <2>; + #size-cells = <0>; + + cpu0: cpu@0 { + device_type = "cpu"; + compatible = "arm,cortex-a35","arm,armv8"; + reg = <0x0 0x0>; + enable-method = "psci"; + }; + + cpu1: cpu@1 { + device_type = "cpu"; + compatible = "arm,cortex-a35","arm,armv8"; + reg = <0x0 0x1>; + enable-method = "psci"; + }; + + cpu2: cpu@2 { + device_type = "cpu"; + compatible = "arm,cortex-a35","arm,armv8"; + reg = <0x0 0x2>; + enable-method = "psci"; + }; + + cpu3: cpu@3 { + device_type = "cpu"; + compatible = "arm,cortex-a35","arm,armv8"; + reg = <0x0 0x3>; + enable-method = "psci"; + }; + }; + + timer { + compatible = "arm,armv8-timer"; + interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>; + }; + + psci { + compatible = "arm,psci-1.0"; + method = "smc"; + }; + + xtal: xtal-clk { + compatible = "fixed-clock"; + clock-frequency = <24000000>; + clock-output-names = "xtal"; + #clock-cells = <0>; + }; + + soc { + compatible = "simple-bus"; + #address-cells = <2>; + #size-cells = <2>; + ranges; + + gic: interrupt-controller@fff01000 { + compatible = "arm,gic-400"; + #interrupt-cells = <3>; + #address-cells = <0>; + interrupt-controller; + reg = <0x0 0xfff01000 0 0x1000>, + <0x0 0xfff02000 0 0x2000>, + <0x0 0xfff04000 0 0x2000>, + <0x0 0xfff06000 0 0x2000>; + interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>; + }; + + apb4: apb4@fe000000 { + compatible = "simple-bus"; + reg = <0x0 0xfe000000 0x0 0x480000>; + #address-cells = <2>; + #size-cells = <2>; + ranges = <0x0 0x0 0x0 0xfe000000 0x0 0x480000>; + + uart_B: serial@7a000 { + compatible = "amlogic,meson-s4-uart", + "amlogic,meson-ao-uart"; + reg = <0x0 0x7a000 0x0 0x18>; + interrupts = <GIC_SPI 169 IRQ_TYPE_EDGE_RISING>; + status = "disabled"; + clocks = <&xtal>, <&xtal>, <&xtal>; + clock-names = "xtal", "pclk", "baud"; + }; + }; + }; +}; diff --git a/arch/arm64/boot/dts/amlogic/meson-sm1-a95xf3-air-gbit.dts b/arch/arm64/boot/dts/amlogic/meson-sm1-a95xf3-air-gbit.dts new file mode 100644 index 000000000000..d1debccdc1c2 --- /dev/null +++ b/arch/arm64/boot/dts/amlogic/meson-sm1-a95xf3-air-gbit.dts @@ -0,0 +1,129 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (c) 2019 BayLibre SAS. All rights reserved. + * Copyright (c) 2020 Christian Hewitt <christianshewitt@gmail.com> + */ + +/dts-v1/; + +#include "meson-sm1-ac2xx.dtsi" +#include <dt-bindings/sound/meson-g12a-tohdmitx.h> + +/ { + compatible = "cyx,a95xf3-air-gbit", "amlogic,sm1"; + model = "Shenzhen CYX Industrial Co., Ltd A95XF3-AIR"; + + sound { + compatible = "amlogic,axg-sound-card"; + model = "A95XF3-AIR"; + audio-aux-devs = <&tdmout_b>; + audio-routing = "TDMOUT_B IN 0", "FRDDR_A OUT 1", + "TDMOUT_B IN 1", "FRDDR_B OUT 1", + "TDMOUT_B IN 2", "FRDDR_C OUT 1", + "TDM_B Playback", "TDMOUT_B OUT"; + + assigned-clocks = <&clkc CLKID_MPLL2>, + <&clkc CLKID_MPLL0>, + <&clkc CLKID_MPLL1>; + assigned-clock-parents = <0>, <0>, <0>; + assigned-clock-rates = <294912000>, + <270950400>, + <393216000>; + status = "okay"; + + dai-link-0 { + sound-dai = <&frddr_a>; + }; + + dai-link-1 { + sound-dai = <&frddr_b>; + }; + + dai-link-2 { + sound-dai = <&frddr_c>; + }; + + /* 8ch hdmi interface */ + dai-link-3 { + sound-dai = <&tdmif_b>; + dai-format = "i2s"; + dai-tdm-slot-tx-mask-0 = <1 1>; + dai-tdm-slot-tx-mask-1 = <1 1>; + dai-tdm-slot-tx-mask-2 = <1 1>; + dai-tdm-slot-tx-mask-3 = <1 1>; + mclk-fs = <256>; + + codec { + sound-dai = <&tohdmitx TOHDMITX_I2S_IN_B>; + }; + }; + + /* hdmi glue */ + dai-link-4 { + sound-dai = <&tohdmitx TOHDMITX_I2S_OUT>; + + codec { + sound-dai = <&hdmi_tx>; + }; + }; + }; +}; + +&arb { + status = "okay"; +}; + +&clkc_audio { + status = "okay"; +}; + +ðmac { + status = "okay"; + + pinctrl-0 = <ð_pins>, <ð_rgmii_pins>; + pinctrl-names = "default"; + phy-mode = "rgmii-txid"; + phy-handle = <&external_phy>; + + rx-internal-delay-ps = <800>; +}; + +&ext_mdio { + external_phy: ethernet-phy@0 { + /* Realtek RTL8211F (0x001cc916) */ + reg = <0>; + max-speed = <1000>; + + reset-assert-us = <10000>; + reset-deassert-us = <80000>; + reset-gpios = <&gpio GPIOZ_15 (GPIO_ACTIVE_LOW | GPIO_OPEN_DRAIN)>; + + interrupt-parent = <&gpio_intc>; + /* MAC_INTR on GPIOZ_14 */ + interrupts = <26 IRQ_TYPE_LEVEL_LOW>; + }; +}; + +&frddr_a { + status = "okay"; +}; + +&frddr_b { + status = "okay"; +}; + +&frddr_c { + status = "okay"; +}; + +&tdmif_b { + status = "okay"; +}; + +&tdmout_b { + status = "okay"; +}; + +&tohdmitx { + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/amlogic/meson-sm1-a95xf3-air.dts b/arch/arm64/boot/dts/amlogic/meson-sm1-a95xf3-air.dts new file mode 100644 index 000000000000..c94f2870b78b --- /dev/null +++ b/arch/arm64/boot/dts/amlogic/meson-sm1-a95xf3-air.dts @@ -0,0 +1,108 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (c) 2019 BayLibre SAS. All rights reserved. + * Copyright (c) 2020 Christian Hewitt <christianshewitt@gmail.com> + */ + +/dts-v1/; + +#include "meson-sm1-ac2xx.dtsi" +#include <dt-bindings/sound/meson-g12a-tohdmitx.h> + +/ { + compatible = "cyx,a95xf3-air", "amlogic,sm1"; + model = "Shenzhen CYX Industrial Co., Ltd A95XF3-AIR"; + + sound { + compatible = "amlogic,axg-sound-card"; + model = "A95XF3-AIR"; + audio-aux-devs = <&tdmout_b>; + audio-routing = "TDMOUT_B IN 0", "FRDDR_A OUT 1", + "TDMOUT_B IN 1", "FRDDR_B OUT 1", + "TDMOUT_B IN 2", "FRDDR_C OUT 1", + "TDM_B Playback", "TDMOUT_B OUT"; + + assigned-clocks = <&clkc CLKID_MPLL2>, + <&clkc CLKID_MPLL0>, + <&clkc CLKID_MPLL1>; + assigned-clock-parents = <0>, <0>, <0>; + assigned-clock-rates = <294912000>, + <270950400>, + <393216000>; + status = "okay"; + + dai-link-0 { + sound-dai = <&frddr_a>; + }; + + dai-link-1 { + sound-dai = <&frddr_b>; + }; + + dai-link-2 { + sound-dai = <&frddr_c>; + }; + + /* 8ch hdmi interface */ + dai-link-3 { + sound-dai = <&tdmif_b>; + dai-format = "i2s"; + dai-tdm-slot-tx-mask-0 = <1 1>; + dai-tdm-slot-tx-mask-1 = <1 1>; + dai-tdm-slot-tx-mask-2 = <1 1>; + dai-tdm-slot-tx-mask-3 = <1 1>; + mclk-fs = <256>; + + codec { + sound-dai = <&tohdmitx TOHDMITX_I2S_IN_B>; + }; + }; + + /* hdmi glue */ + dai-link-4 { + sound-dai = <&tohdmitx TOHDMITX_I2S_OUT>; + + codec { + sound-dai = <&hdmi_tx>; + }; + }; + }; +}; + +&arb { + status = "okay"; +}; + +&clkc_audio { + status = "okay"; +}; + +ðmac { + status = "okay"; + phy-handle = <&internal_ephy>; + phy-mode = "rmii"; +}; + +&frddr_a { + status = "okay"; +}; + +&frddr_b { + status = "okay"; +}; + +&frddr_c { + status = "okay"; +}; + +&tdmif_b { + status = "okay"; +}; + +&tdmout_b { + status = "okay"; +}; + +&tohdmitx { + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/amlogic/meson-sm1-ac2xx.dtsi b/arch/arm64/boot/dts/amlogic/meson-sm1-ac2xx.dtsi new file mode 100644 index 000000000000..46a34731f7e2 --- /dev/null +++ b/arch/arm64/boot/dts/amlogic/meson-sm1-ac2xx.dtsi @@ -0,0 +1,300 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (c) 2019 BayLibre SAS. All rights reserved. + * Copyright (c) 2020 Christian Hewitt <christianshewitt@gmail.com> + * + * AC200/AC202 = S905D3 + * AC213/AC214 = S905X3 + * + */ + +#include "meson-sm1.dtsi" +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/gpio/meson-g12a-gpio.h> +#include <dt-bindings/input/input.h> + +/ { + aliases { + serial0 = &uart_AO; + ethernet0 = ðmac; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + emmc_pwrseq: emmc-pwrseq { + compatible = "mmc-pwrseq-emmc"; + reset-gpios = <&gpio BOOT_12 GPIO_ACTIVE_LOW>; + }; + + cvbs-connector { + compatible = "composite-video-connector"; + + port { + cvbs_connector_in: endpoint { + remote-endpoint = <&cvbs_vdac_out>; + }; + }; + }; + + hdmi-connector { + compatible = "hdmi-connector"; + type = "a"; + + port { + hdmi_connector_in: endpoint { + remote-endpoint = <&hdmi_tx_tmds_out>; + }; + }; + }; + + memory@0 { + device_type = "memory"; + reg = <0x0 0x0 0x0 0x40000000>; + }; + + ao_5v: regulator-ao_5v { + compatible = "regulator-fixed"; + regulator-name = "AO_5V"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + vin-supply = <&dc_in>; + regulator-always-on; + }; + + dc_in: regulator-dc_in { + compatible = "regulator-fixed"; + regulator-name = "DC_IN"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-always-on; + }; + + emmc_1v8: regulator-emmc_1v8 { + compatible = "regulator-fixed"; + regulator-name = "EMMC_1V8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + vin-supply = <&vddao_3v3>; + regulator-always-on; + }; + + vddao_3v3: regulator-vddao_3v3 { + compatible = "regulator-fixed"; + regulator-name = "VDDAO_3V3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + vin-supply = <&dc_in>; + regulator-always-on; + }; + + vddcpu: regulator-vddcpu { + compatible = "pwm-regulator"; + + regulator-name = "VDDCPU"; + regulator-min-microvolt = <690000>; + regulator-max-microvolt = <1050000>; + + vin-supply = <&dc_in>; + + pwms = <&pwm_AO_cd 1 1500 0>; + pwm-dutycycle-range = <100 0>; + + regulator-boot-on; + regulator-always-on; + }; + + vddio_ao1v8: regulator-vddio_ao1v8 { + compatible = "regulator-fixed"; + regulator-name = "VDDIO_AO1V8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + vin-supply = <&vddao_3v3>; + regulator-always-on; + }; + + sdio_pwrseq: sdio-pwrseq { + compatible = "mmc-pwrseq-simple"; + reset-gpios = <&gpio GPIOX_6 GPIO_ACTIVE_LOW>; + clocks = <&wifi32k>; + clock-names = "ext_clock"; + }; + + wifi32k: wifi32k { + compatible = "pwm-clock"; + #clock-cells = <0>; + clock-frequency = <32768>; + pwms = <&pwm_ef 0 30518 0>; /* PWM_E at 32.768KHz */ + }; +}; + +&cec_AO { + pinctrl-0 = <&cec_ao_a_h_pins>; + pinctrl-names = "default"; + status = "disabled"; + hdmi-phandle = <&hdmi_tx>; +}; + +&cecb_AO { + pinctrl-0 = <&cec_ao_b_h_pins>; + pinctrl-names = "default"; + status = "okay"; + hdmi-phandle = <&hdmi_tx>; +}; + +&cpu0 { + cpu-supply = <&vddcpu>; + operating-points-v2 = <&cpu_opp_table>; + clocks = <&clkc CLKID_CPU_CLK>; + clock-latency = <50000>; +}; + +&cpu1 { + cpu-supply = <&vddcpu>; + operating-points-v2 = <&cpu_opp_table>; + clocks = <&clkc CLKID_CPU1_CLK>; + clock-latency = <50000>; +}; + +&cpu2 { + cpu-supply = <&vddcpu>; + operating-points-v2 = <&cpu_opp_table>; + clocks = <&clkc CLKID_CPU2_CLK>; + clock-latency = <50000>; +}; + +&cpu3 { + cpu-supply = <&vddcpu>; + operating-points-v2 = <&cpu_opp_table>; + clocks = <&clkc CLKID_CPU3_CLK>; + clock-latency = <50000>; +}; + +&cvbs_vdac_port { + cvbs_vdac_out: endpoint { + remote-endpoint = <&cvbs_connector_in>; + }; +}; + +&hdmi_tx { + status = "okay"; + pinctrl-0 = <&hdmitx_hpd_pins>, <&hdmitx_ddc_pins>; + pinctrl-names = "default"; +}; + +&hdmi_tx_tmds_port { + hdmi_tx_tmds_out: endpoint { + remote-endpoint = <&hdmi_connector_in>; + }; +}; + +&ir { + status = "okay"; + pinctrl-0 = <&remote_input_ao_pins>; + pinctrl-names = "default"; +}; + +&pwm_AO_ab { + status = "okay"; + pinctrl-0 = <&pwm_ao_a_pins>; + pinctrl-names = "default"; + clocks = <&xtal>; + clock-names = "clkin0"; +}; + +&pwm_AO_cd { + pinctrl-0 = <&pwm_ao_d_e_pins>; + pinctrl-names = "default"; + clocks = <&xtal>; + clock-names = "clkin1"; + status = "okay"; +}; + +&pwm_ef { + status = "okay"; + pinctrl-0 = <&pwm_e_pins>; + pinctrl-names = "default"; + clocks = <&xtal>; + clock-names = "clkin0"; +}; + +&saradc { + status = "okay"; + vref-supply = <&vddio_ao1v8>; +}; + +/* SDIO */ +&sd_emmc_a { + status = "okay"; + pinctrl-0 = <&sdio_pins>; + pinctrl-1 = <&sdio_clk_gate_pins>; + pinctrl-names = "default", "clk-gate"; + #address-cells = <1>; + #size-cells = <0>; + + bus-width = <4>; + cap-sd-highspeed; + sd-uhs-sdr104; + max-frequency = <200000000>; + + non-removable; + disable-wp; + + /* WiFi firmware requires power to be kept while in suspend */ + keep-power-in-suspend; + + mmc-pwrseq = <&sdio_pwrseq>; + + vmmc-supply = <&vddao_3v3>; + vqmmc-supply = <&vddio_ao1v8>; +}; + +/* SD Card */ +&sd_emmc_b { + status = "okay"; + pinctrl-0 = <&sdcard_c_pins>; + pinctrl-1 = <&sdcard_clk_gate_c_pins>; + pinctrl-names = "default", "clk-gate"; + + bus-width = <4>; + cap-sd-highspeed; + /* CRC errors are observed at 50MHz */ + max-frequency = <35000000>; + disable-wp; + + cd-gpios = <&gpio GPIOC_6 GPIO_ACTIVE_LOW>; + vmmc-supply = <&vddao_3v3>; + vqmmc-supply = <&vddao_3v3>; +}; + +/* eMMC */ +&sd_emmc_c { + status = "okay"; + pinctrl-0 = <&emmc_ctrl_pins>, <&emmc_data_8b_pins>, <&emmc_ds_pins>; + pinctrl-1 = <&emmc_clk_gate_pins>; + pinctrl-names = "default", "clk-gate"; + + bus-width = <8>; + cap-mmc-highspeed; + mmc-ddr-1_8v; + mmc-hs200-1_8v; + max-frequency = <200000000>; + non-removable; + disable-wp; + + mmc-pwrseq = <&emmc_pwrseq>; + vmmc-supply = <&vddao_3v3>; + vqmmc-supply = <&emmc_1v8>; +}; + +&uart_AO { + status = "okay"; + pinctrl-0 = <&uart_ao_a_pins>; + pinctrl-names = "default"; +}; + +&usb { + status = "okay"; + dr_mode = "otg"; +}; diff --git a/arch/arm64/boot/dts/amlogic/meson-sm1-h96-max.dts b/arch/arm64/boot/dts/amlogic/meson-sm1-h96-max.dts new file mode 100644 index 000000000000..0f6660e68e72 --- /dev/null +++ b/arch/arm64/boot/dts/amlogic/meson-sm1-h96-max.dts @@ -0,0 +1,145 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (c) 2019 BayLibre SAS. All rights reserved. + * Copyright (c) 2020 Christian Hewitt <christianshewitt@gmail.com> + */ + +/dts-v1/; + +#include "meson-sm1-ac2xx.dtsi" +#include <dt-bindings/sound/meson-g12a-tohdmitx.h> + +/ { + compatible = "haochuangyi,h96-max", "amlogic,sm1"; + model = "Shenzhen Haochuangyi Technology Co., Ltd H96 Max"; + + sound { + compatible = "amlogic,axg-sound-card"; + model = "H96-MAX"; + audio-aux-devs = <&tdmout_b>; + audio-routing = "TDMOUT_B IN 0", "FRDDR_A OUT 1", + "TDMOUT_B IN 1", "FRDDR_B OUT 1", + "TDMOUT_B IN 2", "FRDDR_C OUT 1", + "TDM_B Playback", "TDMOUT_B OUT"; + + assigned-clocks = <&clkc CLKID_MPLL2>, + <&clkc CLKID_MPLL0>, + <&clkc CLKID_MPLL1>; + assigned-clock-parents = <0>, <0>, <0>; + assigned-clock-rates = <294912000>, + <270950400>, + <393216000>; + status = "okay"; + + dai-link-0 { + sound-dai = <&frddr_a>; + }; + + dai-link-1 { + sound-dai = <&frddr_b>; + }; + + dai-link-2 { + sound-dai = <&frddr_c>; + }; + + /* 8ch hdmi interface */ + dai-link-3 { + sound-dai = <&tdmif_b>; + dai-format = "i2s"; + dai-tdm-slot-tx-mask-0 = <1 1>; + dai-tdm-slot-tx-mask-1 = <1 1>; + dai-tdm-slot-tx-mask-2 = <1 1>; + dai-tdm-slot-tx-mask-3 = <1 1>; + mclk-fs = <256>; + + codec { + sound-dai = <&tohdmitx TOHDMITX_I2S_IN_B>; + }; + }; + + /* hdmi glue */ + dai-link-4 { + sound-dai = <&tohdmitx TOHDMITX_I2S_OUT>; + + codec { + sound-dai = <&hdmi_tx>; + }; + }; + }; +}; + +&arb { + status = "okay"; +}; + +&clkc_audio { + status = "okay"; +}; + +ðmac { + status = "okay"; + + pinctrl-0 = <ð_pins>, <ð_rgmii_pins>; + pinctrl-names = "default"; + phy-mode = "rgmii-txid"; + phy-handle = <&external_phy>; + + rx-internal-delay-ps = <800>; +}; + +&ext_mdio { + external_phy: ethernet-phy@0 { + /* Realtek RTL8211F (0x001cc916) */ + reg = <0>; + max-speed = <1000>; + + reset-assert-us = <10000>; + reset-deassert-us = <80000>; + reset-gpios = <&gpio GPIOZ_15 (GPIO_ACTIVE_LOW | GPIO_OPEN_DRAIN)>; + + interrupt-parent = <&gpio_intc>; + /* MAC_INTR on GPIOZ_14 */ + interrupts = <26 IRQ_TYPE_LEVEL_LOW>; + }; +}; + +&frddr_a { + status = "okay"; +}; + +&frddr_b { + status = "okay"; +}; + +&frddr_c { + status = "okay"; +}; + +&tdmif_b { + status = "okay"; +}; + +&tdmout_b { + status = "okay"; +}; + +&tohdmitx { + status = "okay"; +}; + +&uart_A { + status = "okay"; + + pinctrl-0 = <&uart_a_pins>, <&uart_a_cts_rts_pins>; + pinctrl-names = "default"; + uart-has-rtscts; + + bluetooth { + compatible = "brcm,bcm43438-bt"; + shutdown-gpios = <&gpio GPIOX_17 GPIO_ACTIVE_HIGH>; + max-speed = <2000000>; + clocks = <&wifi32k>; + clock-names = "lpo"; + }; +}; diff --git a/arch/arm64/boot/dts/amlogic/meson-sm1-x96-air-gbit.dts b/arch/arm64/boot/dts/amlogic/meson-sm1-x96-air-gbit.dts new file mode 100644 index 000000000000..7e1a74046ba5 --- /dev/null +++ b/arch/arm64/boot/dts/amlogic/meson-sm1-x96-air-gbit.dts @@ -0,0 +1,133 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (c) 2019 BayLibre SAS. All rights reserved. + * Copyright (c) 2020 Christian Hewitt <christianshewitt@gmail.com> + */ + +/dts-v1/; + +#include "meson-sm1-ac2xx.dtsi" +#include <dt-bindings/sound/meson-g12a-tohdmitx.h> + +/ { + compatible = "amediatech,x96-air-gbit", "amlogic,sm1"; + model = "Shenzhen Amediatech Technology Co., Ltd X96 Air"; + + sound { + compatible = "amlogic,axg-sound-card"; + model = "X96-AIR"; + audio-aux-devs = <&tdmout_b>; + audio-routing = "TDMOUT_B IN 0", "FRDDR_A OUT 1", + "TDMOUT_B IN 1", "FRDDR_B OUT 1", + "TDMOUT_B IN 2", "FRDDR_C OUT 1", + "TDM_B Playback", "TDMOUT_B OUT"; + + assigned-clocks = <&clkc CLKID_MPLL2>, + <&clkc CLKID_MPLL0>, + <&clkc CLKID_MPLL1>; + assigned-clock-parents = <0>, <0>, <0>; + assigned-clock-rates = <294912000>, + <270950400>, + <393216000>; + status = "okay"; + + dai-link-0 { + sound-dai = <&frddr_a>; + }; + + dai-link-1 { + sound-dai = <&frddr_b>; + }; + + dai-link-2 { + sound-dai = <&frddr_c>; + }; + + /* 8ch hdmi interface */ + dai-link-3 { + sound-dai = <&tdmif_b>; + dai-format = "i2s"; + dai-tdm-slot-tx-mask-0 = <1 1>; + dai-tdm-slot-tx-mask-1 = <1 1>; + dai-tdm-slot-tx-mask-2 = <1 1>; + dai-tdm-slot-tx-mask-3 = <1 1>; + mclk-fs = <256>; + + codec { + sound-dai = <&tohdmitx TOHDMITX_I2S_IN_B>; + }; + }; + + /* hdmi glue */ + dai-link-4 { + sound-dai = <&tohdmitx TOHDMITX_I2S_OUT>; + + codec { + sound-dai = <&hdmi_tx>; + }; + }; + }; +}; + +&arb { + status = "okay"; +}; + +&clkc_audio { + status = "okay"; +}; + +ðmac { + status = "okay"; + + pinctrl-0 = <ð_pins>, <ð_rgmii_pins>; + pinctrl-names = "default"; + phy-mode = "rgmii-txid"; + phy-handle = <&external_phy>; + + rx-internal-delay-ps = <800>; +}; + +&ext_mdio { + external_phy: ethernet-phy@0 { + /* Realtek RTL8211F (0x001cc916) */ + reg = <0>; + max-speed = <1000>; + + reset-assert-us = <10000>; + reset-deassert-us = <80000>; + reset-gpios = <&gpio GPIOZ_15 (GPIO_ACTIVE_LOW | GPIO_OPEN_DRAIN)>; + + interrupt-parent = <&gpio_intc>; + /* MAC_INTR on GPIOZ_14 */ + interrupts = <26 IRQ_TYPE_LEVEL_LOW>; + }; +}; + +&frddr_a { + status = "okay"; +}; + +&frddr_b { + status = "okay"; +}; + +&frddr_c { + status = "okay"; +}; + +&ir { + linux,rc-map-name = "rc-x96max"; +}; + +&tdmif_b { + status = "okay"; +}; + +&tdmout_b { + status = "okay"; +}; + +&tohdmitx { + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/amlogic/meson-sm1-x96-air.dts b/arch/arm64/boot/dts/amlogic/meson-sm1-x96-air.dts new file mode 100644 index 000000000000..cd93d798f2a3 --- /dev/null +++ b/arch/arm64/boot/dts/amlogic/meson-sm1-x96-air.dts @@ -0,0 +1,112 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (c) 2019 BayLibre SAS. All rights reserved. + * Copyright (c) 2020 Christian Hewitt <christianshewitt@gmail.com> + */ + +/dts-v1/; + +#include "meson-sm1-ac2xx.dtsi" +#include <dt-bindings/sound/meson-g12a-tohdmitx.h> + +/ { + compatible = "amediatech,x96-air", "amlogic,sm1"; + model = "Shenzhen Amediatech Technology Co., Ltd X96 Air"; + + sound { + compatible = "amlogic,axg-sound-card"; + model = "X96-AIR"; + audio-aux-devs = <&tdmout_b>; + audio-routing = "TDMOUT_B IN 0", "FRDDR_A OUT 1", + "TDMOUT_B IN 1", "FRDDR_B OUT 1", + "TDMOUT_B IN 2", "FRDDR_C OUT 1", + "TDM_B Playback", "TDMOUT_B OUT"; + + assigned-clocks = <&clkc CLKID_MPLL2>, + <&clkc CLKID_MPLL0>, + <&clkc CLKID_MPLL1>; + assigned-clock-parents = <0>, <0>, <0>; + assigned-clock-rates = <294912000>, + <270950400>, + <393216000>; + status = "okay"; + + dai-link-0 { + sound-dai = <&frddr_a>; + }; + + dai-link-1 { + sound-dai = <&frddr_b>; + }; + + dai-link-2 { + sound-dai = <&frddr_c>; + }; + + /* 8ch hdmi interface */ + dai-link-3 { + sound-dai = <&tdmif_b>; + dai-format = "i2s"; + dai-tdm-slot-tx-mask-0 = <1 1>; + dai-tdm-slot-tx-mask-1 = <1 1>; + dai-tdm-slot-tx-mask-2 = <1 1>; + dai-tdm-slot-tx-mask-3 = <1 1>; + mclk-fs = <256>; + + codec { + sound-dai = <&tohdmitx TOHDMITX_I2S_IN_B>; + }; + }; + + /* hdmi glue */ + dai-link-4 { + sound-dai = <&tohdmitx TOHDMITX_I2S_OUT>; + + codec { + sound-dai = <&hdmi_tx>; + }; + }; + }; +}; + +&arb { + status = "okay"; +}; + +&clkc_audio { + status = "okay"; +}; + +ðmac { + status = "okay"; + phy-handle = <&internal_ephy>; + phy-mode = "rmii"; +}; + +&frddr_a { + status = "okay"; +}; + +&frddr_b { + status = "okay"; +}; + +&frddr_c { + status = "okay"; +}; + +&ir { + linux,rc-map-name = "rc-beelink-gs1"; +}; + +&tdmif_b { + status = "okay"; +}; + +&tdmout_b { + status = "okay"; +}; + +&tohdmitx { + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/amlogic/meson-sm1.dtsi b/arch/arm64/boot/dts/amlogic/meson-sm1.dtsi index 3d8b1f4f2001..3c07a89bfd27 100644 --- a/arch/arm64/boot/dts/amlogic/meson-sm1.dtsi +++ b/arch/arm64/boot/dts/amlogic/meson-sm1.dtsi @@ -356,6 +356,33 @@ status = "disabled"; }; + spdifin: audio-controller@400 { + compatible = "amlogic,g12a-spdifin", + "amlogic,axg-spdifin"; + reg = <0x0 0x400 0x0 0x30>; + #sound-dai-cells = <0>; + sound-name-prefix = "SPDIFIN"; + interrupts = <GIC_SPI 151 IRQ_TYPE_EDGE_RISING>; + clocks = <&clkc_audio AUD_CLKID_SPDIFIN>, + <&clkc_audio AUD_CLKID_SPDIFIN_CLK>; + clock-names = "pclk", "refclk"; + resets = <&clkc_audio AUD_RESET_SPDIFIN>; + status = "disabled"; + }; + + spdifout_a: audio-controller@480 { + compatible = "amlogic,g12a-spdifout", + "amlogic,axg-spdifout"; + reg = <0x0 0x480 0x0 0x50>; + #sound-dai-cells = <0>; + sound-name-prefix = "SPDIFOUT_A"; + clocks = <&clkc_audio AUD_CLKID_SPDIFOUT>, + <&clkc_audio AUD_CLKID_SPDIFOUT_CLK>; + clock-names = "pclk", "mclk"; + resets = <&clkc_audio AUD_RESET_SPDIFOUT>; + status = "disabled"; + }; + tdmout_a: audio-controller@500 { compatible = "amlogic,sm1-tdmout"; reg = <0x0 0x500 0x0 0x40>; diff --git a/arch/arm64/boot/dts/arm/Makefile b/arch/arm64/boot/dts/arm/Makefile index 800da2e84f3f..4382b73baef5 100644 --- a/arch/arm64/boot/dts/arm/Makefile +++ b/arch/arm64/boot/dts/arm/Makefile @@ -2,7 +2,7 @@ dtb-$(CONFIG_ARCH_VEXPRESS) += \ foundation-v8.dtb foundation-v8-psci.dtb \ foundation-v8-gicv3.dtb foundation-v8-gicv3-psci.dtb -dtb-$(CONFIG_ARCH_VEXPRESS) += juno.dtb juno-r1.dtb juno-r2.dtb +dtb-$(CONFIG_ARCH_VEXPRESS) += juno.dtb juno-r1.dtb juno-r2.dtb juno-scmi.dtb juno-r1-scmi.dtb juno-r2-scmi.dtb dtb-$(CONFIG_ARCH_VEXPRESS) += rtsm_ve-aemv8a.dtb dtb-$(CONFIG_ARCH_VEXPRESS) += vexpress-v2f-1xv7-ca53x2.dtb dtb-$(CONFIG_ARCH_VEXPRESS) += fvp-base-revc.dtb diff --git a/arch/arm64/boot/dts/arm/juno-base.dtsi b/arch/arm64/boot/dts/arm/juno-base.dtsi index a2635b14da30..446c8f476eec 100644 --- a/arch/arm64/boot/dts/arm/juno-base.dtsi +++ b/arch/arm64/boot/dts/arm/juno-base.dtsi @@ -671,7 +671,7 @@ dma-coherent; }; - dma@7ff00000 { + dma-controller@7ff00000 { compatible = "arm,pl330", "arm,primecell"; reg = <0x0 0x7ff00000 0 0x1000>; #dma-cells = <1>; diff --git a/arch/arm64/boot/dts/arm/juno-r1-scmi.dts b/arch/arm64/boot/dts/arm/juno-r1-scmi.dts new file mode 100644 index 000000000000..190a0fba4ad6 --- /dev/null +++ b/arch/arm64/boot/dts/arm/juno-r1-scmi.dts @@ -0,0 +1,23 @@ +#include "juno-r1.dts" +#include "juno-scmi.dtsi" + +/ { + funnel@20130000 { + power-domains = <&scmi_devpd 8>; + }; + + etf@20140000 { + power-domains = <&scmi_devpd 0>; + }; + + funnel@20150000 { + power-domains = <&scmi_devpd 0>; + }; +}; + +&A57_0 { + clocks = <&scmi_dvfs 0>; +}; +&A57_1 { + clocks = <&scmi_dvfs 0>; +}; diff --git a/arch/arm64/boot/dts/arm/juno-r2-scmi.dts b/arch/arm64/boot/dts/arm/juno-r2-scmi.dts new file mode 100644 index 000000000000..dbf13770084f --- /dev/null +++ b/arch/arm64/boot/dts/arm/juno-r2-scmi.dts @@ -0,0 +1,23 @@ +#include "juno-r2.dts" +#include "juno-scmi.dtsi" + +/ { + funnel@20130000 { + power-domains = <&scmi_devpd 8>; + }; + + etf@20140000 { + power-domains = <&scmi_devpd 0>; + }; + + funnel@20150000 { + power-domains = <&scmi_devpd 0>; + }; +}; + +&A72_0 { + clocks = <&scmi_dvfs 0>; +}; +&A72_1 { + clocks = <&scmi_dvfs 0>; +}; diff --git a/arch/arm64/boot/dts/arm/juno-scmi.dts b/arch/arm64/boot/dts/arm/juno-scmi.dts new file mode 100644 index 000000000000..41588fa46d31 --- /dev/null +++ b/arch/arm64/boot/dts/arm/juno-scmi.dts @@ -0,0 +1,9 @@ +#include "juno.dts" +#include "juno-scmi.dtsi" + +&A57_0 { + clocks = <&scmi_dvfs 0>; +}; +&A57_1 { + clocks = <&scmi_dvfs 0>; +}; diff --git a/arch/arm64/boot/dts/arm/juno-scmi.dtsi b/arch/arm64/boot/dts/arm/juno-scmi.dtsi new file mode 100644 index 000000000000..d72dcff9bf06 --- /dev/null +++ b/arch/arm64/boot/dts/arm/juno-scmi.dtsi @@ -0,0 +1,199 @@ +/ { + etf@20010000 { + power-domains = <&scmi_devpd 8>; + }; + + tpiu@20030000 { + power-domains = <&scmi_devpd 8>; + }; + + funnel@20040000 { + power-domains = <&scmi_devpd 8>; + }; + + etr@20070000 { + power-domains = <&scmi_devpd 8>; + }; + + stm@20100000 { + power-domains = <&scmi_devpd 8>; + }; + + replicator@20120000 { + power-domains = <&scmi_devpd 8>; + }; + + funnel@220c0000 { + power-domains = <&scmi_devpd 8>; + }; + + funnel@230c0000 { + power-domains = <&scmi_devpd 8>; + }; + + hdlcd@7ff50000 { + clocks = <&scmi_clk 3>; + }; + + hdlcd@7ff60000 { + clocks = <&scmi_clk 3>; + }; + + /delete-node/ scpi; + + firmware { + scmi { + compatible = "arm,scmi"; + mbox-names = "tx", "rx"; + mboxes = <&mailbox 0 0 &mailbox 0 1>; + shmem = <&cpu_scp_lpri0 &cpu_scp_lpri1>; + #address-cells = <1>; + #size-cells = <0>; + + scmi_devpd: protocol@11 { + reg = <0x11>; + #power-domain-cells = <1>; + }; + + scmi_dvfs: protocol@13 { + reg = <0x13>; + #clock-cells = <1>; + mbox-names = "tx", "rx"; + mboxes = <&mailbox 1 0 &mailbox 1 1>; + shmem = <&cpu_scp_hpri0 &cpu_scp_hpri1>; + }; + + scmi_clk: protocol@14 { + reg = <0x14>; + #clock-cells = <1>; + }; + + scmi_sensors0: protocol@15 { + reg = <0x15>; + #thermal-sensor-cells = <1>; + }; + }; + }; + + thermal-zones { + pmic { + thermal-sensors = <&scmi_sensors0 0>; + }; + + soc { + thermal-sensors = <&scmi_sensors0 3>; + }; + + big-cluster { + thermal-sensors = <&scmi_sensors0 21>; + }; + + little-cluster { + thermal-sensors = <&scmi_sensors0 22>; + }; + + gpu0 { + thermal-sensors = <&scmi_sensors0 23>; + }; + + gpu1 { + thermal-sensors = <&scmi_sensors0 24>; + }; + }; + +}; + +&A53_0 { + clocks = <&scmi_dvfs 1>; +}; +&A53_1 { + clocks = <&scmi_dvfs 1>; +}; +&A53_2 { + clocks = <&scmi_dvfs 1>; +}; +&A53_3 { + clocks = <&scmi_dvfs 1>; +}; + +&cpu_debug0 { + power-domains = <&scmi_devpd 8>; +}; +&cpu_debug1 { + power-domains = <&scmi_devpd 8>; +}; +&cpu_debug2 { + power-domains = <&scmi_devpd 8>; +}; +&cpu_debug3 { + power-domains = <&scmi_devpd 8>; +}; +&cpu_debug4 { + power-domains = <&scmi_devpd 8>; +}; +&cpu_debug5 { + power-domains = <&scmi_devpd 8>; +}; + +&etm0 { + power-domains = <&scmi_devpd 8>; +}; +&etm1 { + power-domains = <&scmi_devpd 8>; +}; +&etm2 { + power-domains = <&scmi_devpd 8>; +}; +&etm3 { + power-domains = <&scmi_devpd 8>; +}; +&etm4 { + power-domains = <&scmi_devpd 8>; +}; +&etm5 { + power-domains = <&scmi_devpd 8>; +}; + +&gpu { + clocks = <&scmi_dvfs 2>; + power-domains = <&scmi_devpd 9>; +}; + +&mailbox { + compatible = "arm,mhu-doorbell", "arm,primecell"; + #mbox-cells = <2>; + mbox-name = "ARM-MHU"; +}; + +&smmu_etr { + power-domains = <&scmi_devpd 8>; +}; + +&smmu_gpu { + power-domains = <&scmi_devpd 9>; +}; + +&sram { + /delete-node/ scp-sram@0; + /delete-node/ scp-sram@200; + + cpu_scp_lpri0: scp-sram@0 { + compatible = "arm,scmi-shmem"; + reg = <0x0 0x80>; + }; + + cpu_scp_lpri1: scp-sram@80 { + compatible = "arm,scmi-shmem"; + reg = <0x80 0x80>; + }; + + cpu_scp_hpri0: scp-sram@100 { + compatible = "arm,scmi-shmem"; + reg = <0x100 0x80>; + }; + + cpu_scp_hpri1: scp-sram@180 { + compatible = "arm,scmi-shmem"; + reg = <0x180 0x80>; + }; +}; diff --git a/arch/arm64/boot/dts/broadcom/Makefile b/arch/arm64/boot/dts/broadcom/Makefile index c6882032a428..5082fcd1fea5 100644 --- a/arch/arm64/boot/dts/broadcom/Makefile +++ b/arch/arm64/boot/dts/broadcom/Makefile @@ -5,7 +5,8 @@ dtb-$(CONFIG_ARCH_BCM2835) += bcm2711-rpi-400.dtb \ bcm2837-rpi-3-a-plus.dtb \ bcm2837-rpi-3-b.dtb \ bcm2837-rpi-3-b-plus.dtb \ - bcm2837-rpi-cm3-io3.dtb + bcm2837-rpi-cm3-io3.dtb \ + bcm2837-rpi-zero-2-w.dtb subdir-y += bcm4908 subdir-y += northstar2 diff --git a/arch/arm64/boot/dts/broadcom/bcm2837-rpi-zero-2-w.dts b/arch/arm64/boot/dts/broadcom/bcm2837-rpi-zero-2-w.dts new file mode 100644 index 000000000000..307ae693e4a0 --- /dev/null +++ b/arch/arm64/boot/dts/broadcom/bcm2837-rpi-zero-2-w.dts @@ -0,0 +1,2 @@ +// SPDX-License-Identifier: GPL-2.0 +#include "arm/bcm2837-rpi-zero-2-w.dts" diff --git a/arch/arm64/boot/dts/broadcom/bcm4908/bcm4908.dtsi b/arch/arm64/boot/dts/broadcom/bcm4908/bcm4908.dtsi index 984c737fa627..a4be040a00c0 100644 --- a/arch/arm64/boot/dts/broadcom/bcm4908/bcm4908.dtsi +++ b/arch/arm64/boot/dts/broadcom/bcm4908/bcm4908.dtsi @@ -273,9 +273,18 @@ #size-cells = <1>; ranges = <0x00 0x00 0xff800000 0x3000>; - timer: timer@400 { - compatible = "brcm,bcm6328-timer", "syscon"; - reg = <0x400 0x3c>; + twd: timer-mfd@400 { + compatible = "brcm,bcm4908-twd", "simple-mfd", "syscon"; + reg = <0x400 0x4c>; + ranges = <0x0 0x400 0x4c>; + + #address-cells = <1>; + #size-cells = <1>; + + watchdog@28 { + compatible = "brcm,bcm6345-wdt"; + reg = <0x28 0x8>; + }; }; gpio0: gpio-controller@500 { @@ -287,6 +296,141 @@ gpio-controller; }; + pinctrl@560 { + compatible = "brcm,bcm4908-pinctrl"; + reg = <0x560 0x10>; + + pins_led_0_a: led_0-a-pins { + function = "led_0"; + groups = "led_0_grp_a"; + }; + + pins_led_1_a: led_1-a-pins { + function = "led_1"; + groups = "led_1_grp_a"; + }; + + pins_led_2_a: led_2-a-pins { + function = "led_2"; + groups = "led_2_grp_a"; + }; + + pins_led_3_a: led_3-a-pins { + function = "led_3"; + groups = "led_3_grp_a"; + }; + + pins_led_4_a: led_4-a-pins { + function = "led_4"; + groups = "led_4_grp_a"; + }; + + pins_led_5_a: led_5-a-pins { + function = "led_5"; + groups = "led_5_grp_a"; + }; + + pins_led_6_a: led_6-a-pins { + function = "led_6"; + groups = "led_6_grp_a"; + }; + + pins_led_7_a: led_7-a-pins { + function = "led_7"; + groups = "led_7_grp_a"; + }; + + pins_led_8_a: led_8-a-pins { + function = "led_8"; + groups = "led_8_grp_a"; + }; + + pins_led_9_a: led_9-a-pins { + function = "led_9"; + groups = "led_9_grp_a"; + }; + + pins_led_21_a: led_21-a-pins { + function = "led_21"; + groups = "led_21_grp_a"; + }; + + pins_led_22_a: led_22-a-pins { + function = "led_22"; + groups = "led_22_grp_a"; + }; + + pins_led_26_a: led_26-a-pins { + function = "led_26"; + groups = "led_26_grp_a"; + }; + + pins_led_27_a: led_27-a-pins { + function = "led_27"; + groups = "led_27_grp_a"; + }; + + pins_led_28_a: led_28-a-pins { + function = "led_28"; + groups = "led_28_grp_a"; + }; + + pins_led_29_a: led_29-a-pins { + function = "led_29"; + groups = "led_29_grp_a"; + }; + + pins_led_30_a: led_30-a-pins { + function = "led_30"; + groups = "led_30_grp_a"; + }; + + pins_hs_uart: hs_uart-pins { + function = "hs_uart"; + groups = "hs_uart_grp"; + }; + + pins_i2c_a: i2c-a-pins { + function = "i2c"; + groups = "i2c_grp_a"; + }; + + pins_i2c_b: i2c-b-pins { + function = "i2c"; + groups = "i2c_grp_b"; + }; + + pins_i2s: i2s-pins { + function = "i2s"; + groups = "i2s_grp"; + }; + + pins_nand_ctrl: nand_ctrl-pins { + function = "nand_ctrl"; + groups = "nand_ctrl_grp"; + }; + + pins_nand_data: nand_data-pins { + function = "nand_data"; + groups = "nand_data_grp"; + }; + + pins_emmc_ctrl: emmc_ctrl-pins { + function = "emmc_ctrl"; + groups = "emmc_ctrl_grp"; + }; + + pins_usb0_pwr: usb0_pwr-pins { + function = "usb0_pwr"; + groups = "usb0_pwr_grp"; + }; + + pins_usb1_pwr: usb1_pwr-pins { + function = "usb1_pwr"; + groups = "usb1_pwr_grp"; + }; + }; + uart0: serial@640 { compatible = "brcm,bcm6345-uart"; reg = <0x640 0x18>; @@ -312,6 +456,15 @@ }; }; + i2c@2100 { + compatible = "brcm,brcmper-i2c"; + reg = <0x2100 0x58>; + clock-frequency = <97500>; + pinctrl-names = "default"; + pinctrl-0 = <&pins_i2c_a>; + status = "disabled"; + }; + misc@2600 { compatible = "brcm,misc", "simple-mfd"; reg = <0x2600 0xe4>; @@ -330,7 +483,7 @@ reboot { compatible = "syscon-reboot"; - regmap = <&timer>; + regmap = <&twd>; offset = <0x34>; mask = <1>; }; diff --git a/arch/arm64/boot/dts/broadcom/northstar2/ns2-svk.dts b/arch/arm64/boot/dts/broadcom/northstar2/ns2-svk.dts index ec19fbf928a1..12a4b1c03390 100644 --- a/arch/arm64/boot/dts/broadcom/northstar2/ns2-svk.dts +++ b/arch/arm64/boot/dts/broadcom/northstar2/ns2-svk.dts @@ -111,8 +111,8 @@ compatible = "silabs,si3226x"; reg = <0>; spi-max-frequency = <5000000>; - spi-cpha = <1>; - spi-cpol = <1>; + spi-cpha; + spi-cpol; pl022,hierarchy = <0>; pl022,interface = <0>; pl022,slave-tx-disable = <0>; @@ -135,8 +135,8 @@ at25,byte-len = <0x8000>; at25,addr-mode = <2>; at25,page-size = <64>; - spi-cpha = <1>; - spi-cpol = <1>; + spi-cpha; + spi-cpol; pl022,hierarchy = <0>; pl022,interface = <0>; pl022,slave-tx-disable = <0>; diff --git a/arch/arm64/boot/dts/broadcom/northstar2/ns2.dtsi b/arch/arm64/boot/dts/broadcom/northstar2/ns2.dtsi index 2cfeaf3b0a87..f59fa3979a04 100644 --- a/arch/arm64/boot/dts/broadcom/northstar2/ns2.dtsi +++ b/arch/arm64/boot/dts/broadcom/northstar2/ns2.dtsi @@ -276,7 +276,7 @@ mboxes = <&pdc3 0>; }; - dma0: dma@61360000 { + dma0: dma-controller@61360000 { compatible = "arm,pl330", "arm,primecell"; reg = <0x61360000 0x1000>; interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>, @@ -644,7 +644,7 @@ reg = <0x66180000 0x1000>; interrupts = <GIC_SPI 404 IRQ_TYPE_LEVEL_HIGH>; clocks = <&iprocslow>, <&iprocslow>; - clock-names = "spiclk", "apb_pclk"; + clock-names = "sspclk", "apb_pclk"; #address-cells = <1>; #size-cells = <0>; status = "disabled"; @@ -655,7 +655,7 @@ reg = <0x66190000 0x1000>; interrupts = <GIC_SPI 405 IRQ_TYPE_LEVEL_HIGH>; clocks = <&iprocslow>, <&iprocslow>; - clock-names = "spiclk", "apb_pclk"; + clock-names = "sspclk", "apb_pclk"; #address-cells = <1>; #size-cells = <0>; status = "disabled"; @@ -687,7 +687,7 @@ }; }; - sata: ahci@663f2000 { + sata: sata@663f2000 { compatible = "brcm,iproc-ahci", "generic-ahci"; reg = <0x663f2000 0x1000>; dma-coherent; diff --git a/arch/arm64/boot/dts/broadcom/stingray/stingray.dtsi b/arch/arm64/boot/dts/broadcom/stingray/stingray.dtsi index 7b04dfe67bef..7f1b8efd0883 100644 --- a/arch/arm64/boot/dts/broadcom/stingray/stingray.dtsi +++ b/arch/arm64/boot/dts/broadcom/stingray/stingray.dtsi @@ -519,7 +519,7 @@ reg = <0x00180000 0x1000>; interrupts = <GIC_SPI 187 IRQ_TYPE_LEVEL_HIGH>; clocks = <&hsls_div2_clk>, <&hsls_div2_clk>; - clock-names = "spiclk", "apb_pclk"; + clock-names = "sspclk", "apb_pclk"; num-cs = <1>; #address-cells = <1>; #size-cells = <0>; @@ -531,7 +531,7 @@ reg = <0x00190000 0x1000>; interrupts = <GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>; clocks = <&hsls_div2_clk>, <&hsls_div2_clk>; - clock-names = "spiclk", "apb_pclk"; + clock-names = "sspclk", "apb_pclk"; num-cs = <1>; #address-cells = <1>; #size-cells = <0>; @@ -543,7 +543,7 @@ reg = <0x00220000 0x28>; }; - dma0: dma@310000 { + dma0: dma-controller@310000 { compatible = "arm,pl330", "arm,primecell"; reg = <0x00310000 0x1000>; interrupts = <GIC_SPI 193 IRQ_TYPE_LEVEL_HIGH>, diff --git a/arch/arm64/boot/dts/exynos/Makefile b/arch/arm64/boot/dts/exynos/Makefile index b41e86df0a84..6e4ba69268e5 100644 --- a/arch/arm64/boot/dts/exynos/Makefile +++ b/arch/arm64/boot/dts/exynos/Makefile @@ -1,6 +1,8 @@ # SPDX-License-Identifier: GPL-2.0 dtb-$(CONFIG_ARCH_EXYNOS) += \ - exynos5433-tm2.dtb \ - exynos5433-tm2e.dtb \ - exynos7-espresso.dtb \ + exynos5433-tm2.dtb \ + exynos5433-tm2e.dtb \ + exynos7-espresso.dtb \ + exynos7885-jackpotlte.dtb \ + exynos850-e850-96.dtb \ exynosautov9-sadk.dtb diff --git a/arch/arm64/boot/dts/exynos/exynos5433-pinctrl.dtsi b/arch/arm64/boot/dts/exynos/exynos5433-pinctrl.dtsi index 32a6518517e5..4b46af3e164d 100644 --- a/arch/arm64/boot/dts/exynos/exynos5433-pinctrl.dtsi +++ b/arch/arm64/boot/dts/exynos/exynos5433-pinctrl.dtsi @@ -11,16 +11,25 @@ #include <dt-bindings/pinctrl/samsung.h> -#define PIN(_func, _pin, _pull, _drv) \ - _pin { \ +#define PIN(_pin, _func, _pull, _drv) \ + pin- ## _pin { \ samsung,pins = #_pin; \ samsung,pin-function = <EXYNOS_PIN_FUNC_ ##_func>; \ samsung,pin-pud = <EXYNOS_PIN_PULL_ ##_pull>; \ samsung,pin-drv = <EXYNOS5433_PIN_DRV_ ##_drv>; \ } +#define PIN_IN(_pin, _pull, _drv) \ + PIN(_pin, INPUT, _pull, _drv) + +#define PIN_OT(_pin, _pull, _drv) \ + PIN(_pin, OUTPUT, _pull, _drv) + +#define PIN_F2(_pin, _pull, _drv) \ + PIN(_pin, 2, _pull, _drv) + &pinctrl_alive { - gpa0: gpa0 { + gpa0: gpa0-gpio-bank { gpio-controller; #gpio-cells = <2>; @@ -37,7 +46,7 @@ #interrupt-cells = <2>; }; - gpa1: gpa1 { + gpa1: gpa1-gpio-bank { gpio-controller; #gpio-cells = <2>; @@ -54,7 +63,7 @@ #interrupt-cells = <2>; }; - gpa2: gpa2 { + gpa2: gpa2-gpio-bank { gpio-controller; #gpio-cells = <2>; @@ -62,7 +71,7 @@ #interrupt-cells = <2>; }; - gpa3: gpa3 { + gpa3: gpa3-gpio-bank { gpio-controller; #gpio-cells = <2>; @@ -70,7 +79,7 @@ #interrupt-cells = <2>; }; - gpf1: gpf1 { + gpf1: gpf1-gpio-bank { gpio-controller; #gpio-cells = <2>; @@ -78,7 +87,7 @@ #interrupt-cells = <2>; }; - gpf2: gpf2 { + gpf2: gpf2-gpio-bank { gpio-controller; #gpio-cells = <2>; @@ -86,7 +95,7 @@ #interrupt-cells = <2>; }; - gpf3: gpf3 { + gpf3: gpf3-gpio-bank { gpio-controller; #gpio-cells = <2>; @@ -94,7 +103,7 @@ #interrupt-cells = <2>; }; - gpf4: gpf4 { + gpf4: gpf4-gpio-bank { gpio-controller; #gpio-cells = <2>; @@ -102,7 +111,7 @@ #interrupt-cells = <2>; }; - gpf5: gpf5 { + gpf5: gpf5-gpio-bank { gpio-controller; #gpio-cells = <2>; @@ -112,7 +121,7 @@ }; &pinctrl_aud { - gpz0: gpz0 { + gpz0: gpz0-gpio-bank { gpio-controller; #gpio-cells = <2>; @@ -120,7 +129,7 @@ #interrupt-cells = <2>; }; - gpz1: gpz1 { + gpz1: gpz1-gpio-bank { gpio-controller; #gpio-cells = <2>; @@ -128,7 +137,7 @@ #interrupt-cells = <2>; }; - i2s0_bus: i2s0-bus { + i2s0_bus: i2s0-bus-pins { samsung,pins = "gpz0-0", "gpz0-1", "gpz0-2", "gpz0-3", "gpz0-4", "gpz0-5", "gpz0-6"; samsung,pin-function = <EXYNOS_PIN_FUNC_2>; @@ -136,14 +145,14 @@ samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR1>; }; - pcm0_bus: pcm0-bus { + pcm0_bus: pcm0-bus-pins { samsung,pins = "gpz1-0", "gpz1-1", "gpz1-2", "gpz1-3"; samsung,pin-function = <EXYNOS_PIN_FUNC_3>; samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR1>; }; - uart_aud_bus: uart-aud-bus { + uart_aud_bus: uart-aud-bus-pins { samsung,pins = "gpz1-3", "gpz1-2", "gpz1-1", "gpz1-0"; samsung,pin-function = <EXYNOS_PIN_FUNC_2>; samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; @@ -152,7 +161,7 @@ }; &pinctrl_cpif { - gpv6: gpv6 { + gpv6: gpv6-gpio-bank { gpio-controller; #gpio-cells = <2>; @@ -162,7 +171,7 @@ }; &pinctrl_ese { - gpj2: gpj2 { + gpj2: gpj2-gpio-bank { gpio-controller; #gpio-cells = <2>; @@ -172,7 +181,7 @@ }; &pinctrl_finger { - gpd5: gpd5 { + gpd5: gpd5-gpio-bank { gpio-controller; #gpio-cells = <2>; @@ -180,14 +189,14 @@ #interrupt-cells = <2>; }; - spi2_bus: spi2-bus { + spi2_bus: spi2-bus-pins { samsung,pins = "gpd5-0", "gpd5-2", "gpd5-3"; samsung,pin-function = <EXYNOS_PIN_FUNC_2>; samsung,pin-pud = <EXYNOS_PIN_PULL_UP>; samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR1>; }; - hs_i2c6_bus: hs-i2c6-bus { + hs_i2c6_bus: hs-i2c6-bus-pins { samsung,pins = "gpd5-3", "gpd5-2"; samsung,pin-function = <EXYNOS_PIN_FUNC_4>; samsung,pin-pud = <EXYNOS_PIN_PULL_UP>; @@ -196,7 +205,7 @@ }; &pinctrl_fsys { - gph1: gph1 { + gph1: gph1-gpio-bank { gpio-controller; #gpio-cells = <2>; @@ -204,7 +213,7 @@ #interrupt-cells = <2>; }; - gpr4: gpr4 { + gpr4: gpr4-gpio-bank { gpio-controller; #gpio-cells = <2>; @@ -212,7 +221,7 @@ #interrupt-cells = <2>; }; - gpr0: gpr0 { + gpr0: gpr0-gpio-bank { gpio-controller; #gpio-cells = <2>; @@ -220,7 +229,7 @@ #interrupt-cells = <2>; }; - gpr1: gpr1 { + gpr1: gpr1-gpio-bank { gpio-controller; #gpio-cells = <2>; @@ -228,7 +237,7 @@ #interrupt-cells = <2>; }; - gpr2: gpr2 { + gpr2: gpr2-gpio-bank { gpio-controller; #gpio-cells = <2>; @@ -236,7 +245,7 @@ #interrupt-cells = <2>; }; - gpr3: gpr3 { + gpr3: gpr3-gpio-bank { gpio-controller; #gpio-cells = <2>; @@ -244,139 +253,139 @@ #interrupt-cells = <2>; }; - sd0_clk: sd0-clk { + sd0_clk: sd0-clk-pins { samsung,pins = "gpr0-0"; samsung,pin-function = <EXYNOS_PIN_FUNC_2>; samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR4>; }; - sd0_cmd: sd0-cmd { + sd0_cmd: sd0-cmd-pins { samsung,pins = "gpr0-1"; samsung,pin-function = <EXYNOS_PIN_FUNC_2>; samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR4>; }; - sd0_rdqs: sd0-rdqs { + sd0_rdqs: sd0-rdqs-pins { samsung,pins = "gpr0-2"; samsung,pin-function = <EXYNOS_PIN_FUNC_2>; samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>; samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR4>; }; - sd0_qrdy: sd0-qrdy { + sd0_qrdy: sd0-qrdy-pins { samsung,pins = "gpr0-3"; samsung,pin-function = <EXYNOS_PIN_FUNC_2>; samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>; samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR4>; }; - sd0_bus1: sd0-bus-width1 { + sd0_bus1: sd0-bus-width1-pins { samsung,pins = "gpr1-0"; samsung,pin-function = <EXYNOS_PIN_FUNC_2>; samsung,pin-pud = <EXYNOS_PIN_PULL_UP>; samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR4>; }; - sd0_bus4: sd0-bus-width4 { + sd0_bus4: sd0-bus-width4-pins { samsung,pins = "gpr1-1", "gpr1-2", "gpr1-3"; samsung,pin-function = <EXYNOS_PIN_FUNC_2>; samsung,pin-pud = <EXYNOS_PIN_PULL_UP>; samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR4>; }; - sd0_bus8: sd0-bus-width8 { + sd0_bus8: sd0-bus-width8-pins { samsung,pins = "gpr1-4", "gpr1-5", "gpr1-6", "gpr1-7"; samsung,pin-function = <EXYNOS_PIN_FUNC_2>; samsung,pin-pud = <EXYNOS_PIN_PULL_UP>; samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR4>; }; - sd1_clk: sd1-clk { + sd1_clk: sd1-clk-pins { samsung,pins = "gpr2-0"; samsung,pin-function = <EXYNOS_PIN_FUNC_2>; samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR4>; }; - sd1_cmd: sd1-cmd { + sd1_cmd: sd1-cmd-pins { samsung,pins = "gpr2-1"; samsung,pin-function = <EXYNOS_PIN_FUNC_2>; samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR4>; }; - sd1_bus1: sd1-bus-width1 { + sd1_bus1: sd1-bus-width1-pins { samsung,pins = "gpr3-0"; samsung,pin-function = <EXYNOS_PIN_FUNC_2>; samsung,pin-pud = <EXYNOS_PIN_PULL_UP>; samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR4>; }; - sd1_bus4: sd1-bus-width4 { + sd1_bus4: sd1-bus-width4-pins { samsung,pins = "gpr3-1", "gpr3-2", "gpr3-3"; samsung,pin-function = <EXYNOS_PIN_FUNC_2>; samsung,pin-pud = <EXYNOS_PIN_PULL_UP>; samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR4>; }; - sd1_bus8: sd1-bus-width8 { + sd1_bus8: sd1-bus-width8-pins { samsung,pins = "gpr3-4", "gpr3-5", "gpr3-6", "gpr3-7"; samsung,pin-function = <EXYNOS_PIN_FUNC_2>; samsung,pin-pud = <EXYNOS_PIN_PULL_UP>; samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR4>; }; - pcie_bus: pcie_bus { + pcie_bus: pcie-bus-pins { samsung,pins = "gpr3-4", "gpr3-5", "gpr3-6"; samsung,pin-function = <EXYNOS_PIN_FUNC_3>; samsung,pin-pud = <EXYNOS_PIN_PULL_UP>; }; - sd2_clk: sd2-clk { + sd2_clk: sd2-clk-pins { samsung,pins = "gpr4-0"; samsung,pin-function = <EXYNOS_PIN_FUNC_2>; samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR4>; }; - sd2_cmd: sd2-cmd { + sd2_cmd: sd2-cmd-pins { samsung,pins = "gpr4-1"; samsung,pin-function = <EXYNOS_PIN_FUNC_2>; samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR4>; }; - sd2_cd: sd2-cd { + sd2_cd: sd2-cd-pins { samsung,pins = "gpr4-2"; samsung,pin-function = <EXYNOS_PIN_FUNC_2>; samsung,pin-pud = <EXYNOS_PIN_PULL_UP>; samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR4>; }; - sd2_bus1: sd2-bus-width1 { + sd2_bus1: sd2-bus-width1-pins { samsung,pins = "gpr4-3"; samsung,pin-function = <EXYNOS_PIN_FUNC_2>; samsung,pin-pud = <EXYNOS_PIN_PULL_UP>; samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR4>; }; - sd2_bus4: sd2-bus-width4 { + sd2_bus4: sd2-bus-width4-pins { samsung,pins = "gpr4-4", "gpr4-5", "gpr4-6"; samsung,pin-function = <EXYNOS_PIN_FUNC_2>; samsung,pin-pud = <EXYNOS_PIN_PULL_UP>; samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR4>; }; - sd2_clk_output: sd2-clk-output { + sd2_clk_output: sd2-clk-output-pins { samsung,pins = "gpr4-0"; samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>; samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR3>; }; - sd2_cmd_output: sd2-cmd-output { + sd2_cmd_output: sd2-cmd-output-pins { samsung,pins = "gpr4-1"; samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>; samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; @@ -385,7 +394,7 @@ }; &pinctrl_imem { - gpf0: gpf0 { + gpf0: gpf0-gpio-bank { gpio-controller; #gpio-cells = <2>; @@ -395,7 +404,7 @@ }; &pinctrl_nfc { - gpj0: gpj0 { + gpj0: gpj0-gpio-bank { gpio-controller; #gpio-cells = <2>; @@ -403,7 +412,7 @@ #interrupt-cells = <2>; }; - hs_i2c4_bus: hs-i2c4-bus { + hs_i2c4_bus: hs-i2c4-bus-pins { samsung,pins = "gpj0-1", "gpj0-0"; samsung,pin-function = <EXYNOS_PIN_FUNC_4>; samsung,pin-pud = <EXYNOS_PIN_PULL_UP>; @@ -412,7 +421,7 @@ }; &pinctrl_peric { - gpv7: gpv7 { + gpv7: gpv7-gpio-bank { gpio-controller; #gpio-cells = <2>; @@ -420,7 +429,7 @@ #interrupt-cells = <2>; }; - gpb0: gpb0 { + gpb0: gpb0-gpio-bank { gpio-controller; #gpio-cells = <2>; @@ -428,7 +437,7 @@ #interrupt-cells = <2>; }; - gpc0: gpc0 { + gpc0: gpc0-gpio-bank { gpio-controller; #gpio-cells = <2>; @@ -436,7 +445,7 @@ #interrupt-cells = <2>; }; - gpc1: gpc1 { + gpc1: gpc1-gpio-bank { gpio-controller; #gpio-cells = <2>; @@ -444,7 +453,7 @@ #interrupt-cells = <2>; }; - gpc2: gpc2 { + gpc2: gpc2-gpio-bank { gpio-controller; #gpio-cells = <2>; @@ -452,7 +461,7 @@ #interrupt-cells = <2>; }; - gpc3: gpc3 { + gpc3: gpc3-gpio-bank { gpio-controller; #gpio-cells = <2>; @@ -460,7 +469,7 @@ #interrupt-cells = <2>; }; - gpg0: gpg0 { + gpg0: gpg0-gpio-bank { gpio-controller; #gpio-cells = <2>; @@ -468,7 +477,7 @@ #interrupt-cells = <2>; }; - gpd0: gpd0 { + gpd0: gpd0-gpio-bank { gpio-controller; #gpio-cells = <2>; @@ -476,7 +485,7 @@ #interrupt-cells = <2>; }; - gpd1: gpd1 { + gpd1: gpd1-gpio-bank { gpio-controller; #gpio-cells = <2>; @@ -484,7 +493,7 @@ #interrupt-cells = <2>; }; - gpd2: gpd2 { + gpd2: gpd2-gpio-bank { gpio-controller; #gpio-cells = <2>; @@ -492,7 +501,7 @@ #interrupt-cells = <2>; }; - gpd4: gpd4 { + gpd4: gpd4-gpio-bank { gpio-controller; #gpio-cells = <2>; @@ -500,7 +509,7 @@ #interrupt-cells = <2>; }; - gpd8: gpd8 { + gpd8: gpd8-gpio-bank { gpio-controller; #gpio-cells = <2>; @@ -508,7 +517,7 @@ #interrupt-cells = <2>; }; - gpd6: gpd6 { + gpd6: gpd6-gpio-bank { gpio-controller; #gpio-cells = <2>; @@ -516,7 +525,7 @@ #interrupt-cells = <2>; }; - gpd7: gpd7 { + gpd7: gpd7-gpio-bank { gpio-controller; #gpio-cells = <2>; @@ -524,7 +533,7 @@ #interrupt-cells = <2>; }; - gpg1: gpg1 { + gpg1: gpg1-gpio-bank { gpio-controller; #gpio-cells = <2>; @@ -532,7 +541,7 @@ #interrupt-cells = <2>; }; - gpg2: gpg2 { + gpg2: gpg2-gpio-bank { gpio-controller; #gpio-cells = <2>; @@ -540,7 +549,7 @@ #interrupt-cells = <2>; }; - gpg3: gpg3 { + gpg3: gpg3-gpio-bank { gpio-controller; #gpio-cells = <2>; @@ -548,21 +557,21 @@ #interrupt-cells = <2>; }; - hs_i2c8_bus: hs-i2c8-bus { + hs_i2c8_bus: hs-i2c8-bus-pins { samsung,pins = "gpb0-1", "gpb0-0"; samsung,pin-function = <EXYNOS_PIN_FUNC_4>; samsung,pin-pud = <EXYNOS_PIN_PULL_UP>; samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR1>; }; - hs_i2c9_bus: hs-i2c9-bus { + hs_i2c9_bus: hs-i2c9-bus-pins { samsung,pins = "gpb0-3", "gpb0-2"; samsung,pin-function = <EXYNOS_PIN_FUNC_4>; samsung,pin-pud = <EXYNOS_PIN_PULL_UP>; samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR1>; }; - i2s1_bus: i2s1-bus { + i2s1_bus: i2s1-bus-pins { samsung,pins = "gpd4-0", "gpd4-1", "gpd4-2", "gpd4-3", "gpd4-4"; samsung,pin-function = <EXYNOS_PIN_FUNC_2>; @@ -570,7 +579,7 @@ samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR1>; }; - pcm1_bus: pcm1-bus { + pcm1_bus: pcm1-bus-pins { samsung,pins = "gpd4-0", "gpd4-1", "gpd4-2", "gpd4-3", "gpd4-4"; samsung,pin-function = <EXYNOS_PIN_FUNC_3>; @@ -578,193 +587,193 @@ samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR1>; }; - spdif_bus: spdif-bus { + spdif_bus: spdif-bus-pins { samsung,pins = "gpd4-3", "gpd4-4"; samsung,pin-function = <EXYNOS_PIN_FUNC_4>; samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR1>; }; - fimc_is_spi_pin0: fimc-is-spi-pin0 { + fimc_is_spi_pin0: fimc-is-spi-pin0-pins { samsung,pins = "gpc3-3", "gpc3-2", "gpc3-1", "gpc3-0"; samsung,pin-function = <EXYNOS_PIN_FUNC_2>; samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR1>; }; - fimc_is_spi_pin1: fimc-is-spi-pin1 { + fimc_is_spi_pin1: fimc-is-spi-pin1-pins { samsung,pins = "gpc3-7", "gpc3-6", "gpc3-5", "gpc3-4"; samsung,pin-function = <EXYNOS_PIN_FUNC_2>; samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR1>; }; - uart0_bus: uart0-bus { + uart0_bus: uart0-bus-pins { samsung,pins = "gpd0-3", "gpd0-2", "gpd0-1", "gpd0-0"; samsung,pin-function = <EXYNOS_PIN_FUNC_2>; samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; }; - hs_i2c2_bus: hs-i2c2-bus { + hs_i2c2_bus: hs-i2c2-bus-pins { samsung,pins = "gpd0-3", "gpd0-2"; samsung,pin-function = <EXYNOS_PIN_FUNC_3>; samsung,pin-pud = <EXYNOS_PIN_PULL_UP>; samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR1>; }; - uart2_bus: uart2-bus { + uart2_bus: uart2-bus-pins { samsung,pins = "gpd1-5", "gpd1-4"; samsung,pin-function = <EXYNOS_PIN_FUNC_2>; samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; }; - uart1_bus: uart1-bus { + uart1_bus: uart1-bus-pins { samsung,pins = "gpd1-3", "gpd1-2", "gpd1-1", "gpd1-0"; samsung,pin-function = <EXYNOS_PIN_FUNC_2>; samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; }; - hs_i2c3_bus: hs-i2c3-bus { + hs_i2c3_bus: hs-i2c3-bus-pins { samsung,pins = "gpd1-3", "gpd1-2"; samsung,pin-function = <EXYNOS_PIN_FUNC_3>; samsung,pin-pud = <EXYNOS_PIN_PULL_UP>; samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR1>; }; - hs_i2c0_bus: hs-i2c0-bus { + hs_i2c0_bus: hs-i2c0-bus-pins { samsung,pins = "gpd2-1", "gpd2-0"; samsung,pin-function = <EXYNOS_PIN_FUNC_2>; samsung,pin-pud = <EXYNOS_PIN_PULL_UP>; samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR1>; }; - hs_i2c1_bus: hs-i2c1-bus { + hs_i2c1_bus: hs-i2c1-bus-pins { samsung,pins = "gpd2-3", "gpd2-2"; samsung,pin-function = <EXYNOS_PIN_FUNC_2>; samsung,pin-pud = <EXYNOS_PIN_PULL_UP>; samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR1>; }; - pwm0_out: pwm0-out { + pwm0_out: pwm0-out-pins { samsung,pins = "gpd2-4"; samsung,pin-function = <EXYNOS_PIN_FUNC_2>; samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR1>; }; - pwm1_out: pwm1-out { + pwm1_out: pwm1-out-pins { samsung,pins = "gpd2-5"; samsung,pin-function = <EXYNOS_PIN_FUNC_2>; samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR1>; }; - pwm2_out: pwm2-out { + pwm2_out: pwm2-out-pins { samsung,pins = "gpd2-6"; samsung,pin-function = <EXYNOS_PIN_FUNC_2>; samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR1>; }; - pwm3_out: pwm3-out { + pwm3_out: pwm3-out-pins { samsung,pins = "gpd2-7"; samsung,pin-function = <EXYNOS_PIN_FUNC_2>; samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR1>; }; - spi1_bus: spi1-bus { + spi1_bus: spi1-bus-pins { samsung,pins = "gpd6-2", "gpd6-4", "gpd6-5"; samsung,pin-function = <EXYNOS_PIN_FUNC_2>; samsung,pin-pud = <EXYNOS_PIN_PULL_UP>; samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR1>; }; - hs_i2c7_bus: hs-i2c7-bus { + hs_i2c7_bus: hs-i2c7-bus-pins { samsung,pins = "gpd2-7", "gpd2-6"; samsung,pin-function = <EXYNOS_PIN_FUNC_4>; samsung,pin-pud = <EXYNOS_PIN_PULL_UP>; samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR1>; }; - spi0_bus: spi0-bus { + spi0_bus: spi0-bus-pins { samsung,pins = "gpd8-0", "gpd6-0", "gpd6-1"; samsung,pin-function = <EXYNOS_PIN_FUNC_2>; samsung,pin-pud = <EXYNOS_PIN_PULL_UP>; samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR1>; }; - hs_i2c10_bus: hs-i2c10-bus { + hs_i2c10_bus: hs-i2c10-bus-pins { samsung,pins = "gpg3-1", "gpg3-0"; samsung,pin-function = <EXYNOS_PIN_FUNC_4>; samsung,pin-pud = <EXYNOS_PIN_PULL_UP>; samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR1>; }; - hs_i2c11_bus: hs-i2c11-bus { + hs_i2c11_bus: hs-i2c11-bus-pins { samsung,pins = "gpg3-3", "gpg3-2"; samsung,pin-function = <EXYNOS_PIN_FUNC_4>; samsung,pin-pud = <EXYNOS_PIN_PULL_UP>; samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR1>; }; - spi3_bus: spi3-bus { + spi3_bus: spi3-bus-pins { samsung,pins = "gpg3-4", "gpg3-6", "gpg3-7"; samsung,pin-function = <EXYNOS_PIN_FUNC_3>; samsung,pin-pud = <EXYNOS_PIN_PULL_UP>; samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR1>; }; - spi4_bus: spi4-bus { + spi4_bus: spi4-bus-pins { samsung,pins = "gpv7-1", "gpv7-3", "gpv7-4"; samsung,pin-function = <EXYNOS_PIN_FUNC_3>; samsung,pin-pud = <EXYNOS_PIN_PULL_UP>; samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR1>; }; - fimc_is_uart: fimc-is-uart { + fimc_is_uart: fimc-is-uart-pins { samsung,pins = "gpc1-1", "gpc0-7"; samsung,pin-function = <EXYNOS_PIN_FUNC_3>; samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR1>; }; - fimc_is_ch0_i2c: fimc-is-ch0_i2c { + fimc_is_ch0_i2c: fimc-is-ch0-i2c-pins { samsung,pins = "gpc2-1", "gpc2-0"; samsung,pin-function = <EXYNOS_PIN_FUNC_2>; samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR1>; }; - fimc_is_ch0_mclk: fimc-is-ch0_mclk { + fimc_is_ch0_mclk: fimc-is-ch0-mclk-pins { samsung,pins = "gpd7-0"; samsung,pin-function = <EXYNOS_PIN_FUNC_2>; samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR1>; }; - fimc_is_ch1_i2c: fimc-is-ch1-i2c { + fimc_is_ch1_i2c: fimc-is-ch1-i2c-pins { samsung,pins = "gpc2-3", "gpc2-2"; samsung,pin-function = <EXYNOS_PIN_FUNC_2>; samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR1>; }; - fimc_is_ch1_mclk: fimc-is-ch1-mclk { + fimc_is_ch1_mclk: fimc-is-ch1-mclk-pins { samsung,pins = "gpd7-1"; samsung,pin-function = <EXYNOS_PIN_FUNC_2>; samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR1>; }; - fimc_is_ch2_i2c: fimc-is-ch2-i2c { + fimc_is_ch2_i2c: fimc-is-ch2-i2c-pins { samsung,pins = "gpc2-5", "gpc2-4"; samsung,pin-function = <EXYNOS_PIN_FUNC_2>; samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR1>; }; - fimc_is_ch2_mclk: fimc-is-ch2-mclk { + fimc_is_ch2_mclk: fimc-is-ch2-mclk-pins { samsung,pins = "gpd7-2"; samsung,pin-function = <EXYNOS_PIN_FUNC_2>; samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; @@ -773,7 +782,7 @@ }; &pinctrl_touch { - gpj1: gpj1 { + gpj1: gpj1-gpio-bank { gpio-controller; #gpio-cells = <2>; @@ -781,7 +790,7 @@ #interrupt-cells = <2>; }; - hs_i2c5_bus: hs-i2c5-bus { + hs_i2c5_bus: hs-i2c5-bus-pins { samsung,pins = "gpj1-1", "gpj1-0"; samsung,pin-function = <EXYNOS_PIN_FUNC_4>; samsung,pin-pud = <EXYNOS_PIN_PULL_UP>; diff --git a/arch/arm64/boot/dts/exynos/exynos5433-tm2-common.dtsi b/arch/arm64/boot/dts/exynos/exynos5433-tm2-common.dtsi index cbcc01a66aab..91c9bd1b47dd 100644 --- a/arch/arm64/boot/dts/exynos/exynos5433-tm2-common.dtsi +++ b/arch/arm64/boot/dts/exynos/exynos5433-tm2-common.dtsi @@ -858,10 +858,10 @@ interrupts = <5 IRQ_TYPE_EDGE_FALLING>; reg = <0x66>; - muic: max77843-muic { + muic: extcon { compatible = "maxim,max77843-muic"; - musb_con: musb-connector { + musb_con: connector { compatible = "samsung,usb-connector-11pin", "usb-b-connector"; label = "micro-USB"; @@ -871,6 +871,17 @@ #address-cells = <1>; #size-cells = <0>; + port@0 { + /* + * TODO: The DTS this is based on does not have + * port@0 which is a required property. The ports + * look incomplete and need fixing. + * Add a disabled port just to satisfy dtschema. + */ + reg = <0>; + status = "disabled"; + }; + port@3 { reg = <3>; musb_con_to_mhl: endpoint { @@ -910,7 +921,7 @@ }; }; - haptic: max77843-haptic { + haptic: motor-driver { compatible = "maxim,max77843-haptic"; haptic-supply = <&ldo38_reg>; pwms = <&pwm 0 33670 0>; @@ -1011,80 +1022,80 @@ pinctrl-0 = <&initial_alive>; initial_alive: initial-state { - PIN(INPUT, gpa0-0, DOWN, FAST_SR1); - PIN(INPUT, gpa0-1, NONE, FAST_SR1); - PIN(INPUT, gpa0-2, DOWN, FAST_SR1); - PIN(INPUT, gpa0-3, NONE, FAST_SR1); - PIN(INPUT, gpa0-4, NONE, FAST_SR1); - PIN(INPUT, gpa0-5, DOWN, FAST_SR1); - PIN(INPUT, gpa0-6, NONE, FAST_SR1); - PIN(INPUT, gpa0-7, NONE, FAST_SR1); - - PIN(INPUT, gpa1-0, UP, FAST_SR1); - PIN(INPUT, gpa1-1, UP, FAST_SR1); - PIN(INPUT, gpa1-2, NONE, FAST_SR1); - PIN(INPUT, gpa1-3, DOWN, FAST_SR1); - PIN(INPUT, gpa1-4, DOWN, FAST_SR1); - PIN(INPUT, gpa1-5, NONE, FAST_SR1); - PIN(INPUT, gpa1-6, NONE, FAST_SR1); - PIN(INPUT, gpa1-7, NONE, FAST_SR1); - - PIN(INPUT, gpa2-0, NONE, FAST_SR1); - PIN(INPUT, gpa2-1, NONE, FAST_SR1); - PIN(INPUT, gpa2-2, NONE, FAST_SR1); - PIN(INPUT, gpa2-3, DOWN, FAST_SR1); - PIN(INPUT, gpa2-4, NONE, FAST_SR1); - PIN(INPUT, gpa2-5, DOWN, FAST_SR1); - PIN(INPUT, gpa2-6, DOWN, FAST_SR1); - PIN(INPUT, gpa2-7, NONE, FAST_SR1); - - PIN(INPUT, gpa3-0, DOWN, FAST_SR1); - PIN(INPUT, gpa3-1, DOWN, FAST_SR1); - PIN(INPUT, gpa3-2, NONE, FAST_SR1); - PIN(INPUT, gpa3-3, DOWN, FAST_SR1); - PIN(INPUT, gpa3-4, NONE, FAST_SR1); - PIN(INPUT, gpa3-5, DOWN, FAST_SR1); - PIN(INPUT, gpa3-6, DOWN, FAST_SR1); - PIN(INPUT, gpa3-7, DOWN, FAST_SR1); - - PIN(INPUT, gpf1-0, NONE, FAST_SR1); - PIN(INPUT, gpf1-1, NONE, FAST_SR1); - PIN(INPUT, gpf1-2, DOWN, FAST_SR1); - PIN(INPUT, gpf1-4, UP, FAST_SR1); - PIN(OUTPUT, gpf1-5, NONE, FAST_SR1); - PIN(INPUT, gpf1-6, DOWN, FAST_SR1); - PIN(INPUT, gpf1-7, DOWN, FAST_SR1); - - PIN(INPUT, gpf2-0, DOWN, FAST_SR1); - PIN(INPUT, gpf2-1, DOWN, FAST_SR1); - PIN(INPUT, gpf2-2, DOWN, FAST_SR1); - PIN(INPUT, gpf2-3, DOWN, FAST_SR1); - - PIN(INPUT, gpf3-0, DOWN, FAST_SR1); - PIN(INPUT, gpf3-1, DOWN, FAST_SR1); - PIN(INPUT, gpf3-2, NONE, FAST_SR1); - PIN(INPUT, gpf3-3, DOWN, FAST_SR1); - - PIN(INPUT, gpf4-0, DOWN, FAST_SR1); - PIN(INPUT, gpf4-1, DOWN, FAST_SR1); - PIN(INPUT, gpf4-2, DOWN, FAST_SR1); - PIN(INPUT, gpf4-3, DOWN, FAST_SR1); - PIN(INPUT, gpf4-4, DOWN, FAST_SR1); - PIN(INPUT, gpf4-5, DOWN, FAST_SR1); - PIN(INPUT, gpf4-6, DOWN, FAST_SR1); - PIN(INPUT, gpf4-7, DOWN, FAST_SR1); - - PIN(INPUT, gpf5-0, DOWN, FAST_SR1); - PIN(INPUT, gpf5-1, DOWN, FAST_SR1); - PIN(INPUT, gpf5-2, DOWN, FAST_SR1); - PIN(INPUT, gpf5-3, DOWN, FAST_SR1); - PIN(OUTPUT, gpf5-4, NONE, FAST_SR1); - PIN(INPUT, gpf5-5, DOWN, FAST_SR1); - PIN(INPUT, gpf5-6, DOWN, FAST_SR1); - PIN(INPUT, gpf5-7, DOWN, FAST_SR1); + PIN_IN(gpa0-0, DOWN, FAST_SR1); + PIN_IN(gpa0-1, NONE, FAST_SR1); + PIN_IN(gpa0-2, DOWN, FAST_SR1); + PIN_IN(gpa0-3, NONE, FAST_SR1); + PIN_IN(gpa0-4, NONE, FAST_SR1); + PIN_IN(gpa0-5, DOWN, FAST_SR1); + PIN_IN(gpa0-6, NONE, FAST_SR1); + PIN_IN(gpa0-7, NONE, FAST_SR1); + + PIN_IN(gpa1-0, UP, FAST_SR1); + PIN_IN(gpa1-1, UP, FAST_SR1); + PIN_IN(gpa1-2, NONE, FAST_SR1); + PIN_IN(gpa1-3, DOWN, FAST_SR1); + PIN_IN(gpa1-4, DOWN, FAST_SR1); + PIN_IN(gpa1-5, NONE, FAST_SR1); + PIN_IN(gpa1-6, NONE, FAST_SR1); + PIN_IN(gpa1-7, NONE, FAST_SR1); + + PIN_IN(gpa2-0, NONE, FAST_SR1); + PIN_IN(gpa2-1, NONE, FAST_SR1); + PIN_IN(gpa2-2, NONE, FAST_SR1); + PIN_IN(gpa2-3, DOWN, FAST_SR1); + PIN_IN(gpa2-4, NONE, FAST_SR1); + PIN_IN(gpa2-5, DOWN, FAST_SR1); + PIN_IN(gpa2-6, DOWN, FAST_SR1); + PIN_IN(gpa2-7, NONE, FAST_SR1); + + PIN_IN(gpa3-0, DOWN, FAST_SR1); + PIN_IN(gpa3-1, DOWN, FAST_SR1); + PIN_IN(gpa3-2, NONE, FAST_SR1); + PIN_IN(gpa3-3, DOWN, FAST_SR1); + PIN_IN(gpa3-4, NONE, FAST_SR1); + PIN_IN(gpa3-5, DOWN, FAST_SR1); + PIN_IN(gpa3-6, DOWN, FAST_SR1); + PIN_IN(gpa3-7, DOWN, FAST_SR1); + + PIN_IN(gpf1-0, NONE, FAST_SR1); + PIN_IN(gpf1-1, NONE, FAST_SR1); + PIN_IN(gpf1-2, DOWN, FAST_SR1); + PIN_IN(gpf1-4, UP, FAST_SR1); + PIN_OT(gpf1-5, NONE, FAST_SR1); + PIN_IN(gpf1-6, DOWN, FAST_SR1); + PIN_IN(gpf1-7, DOWN, FAST_SR1); + + PIN_IN(gpf2-0, DOWN, FAST_SR1); + PIN_IN(gpf2-1, DOWN, FAST_SR1); + PIN_IN(gpf2-2, DOWN, FAST_SR1); + PIN_IN(gpf2-3, DOWN, FAST_SR1); + + PIN_IN(gpf3-0, DOWN, FAST_SR1); + PIN_IN(gpf3-1, DOWN, FAST_SR1); + PIN_IN(gpf3-2, NONE, FAST_SR1); + PIN_IN(gpf3-3, DOWN, FAST_SR1); + + PIN_IN(gpf4-0, DOWN, FAST_SR1); + PIN_IN(gpf4-1, DOWN, FAST_SR1); + PIN_IN(gpf4-2, DOWN, FAST_SR1); + PIN_IN(gpf4-3, DOWN, FAST_SR1); + PIN_IN(gpf4-4, DOWN, FAST_SR1); + PIN_IN(gpf4-5, DOWN, FAST_SR1); + PIN_IN(gpf4-6, DOWN, FAST_SR1); + PIN_IN(gpf4-7, DOWN, FAST_SR1); + + PIN_IN(gpf5-0, DOWN, FAST_SR1); + PIN_IN(gpf5-1, DOWN, FAST_SR1); + PIN_IN(gpf5-2, DOWN, FAST_SR1); + PIN_IN(gpf5-3, DOWN, FAST_SR1); + PIN_OT(gpf5-4, NONE, FAST_SR1); + PIN_IN(gpf5-5, DOWN, FAST_SR1); + PIN_IN(gpf5-6, DOWN, FAST_SR1); + PIN_IN(gpf5-7, DOWN, FAST_SR1); }; - te_irq: te-irq { + te_irq: te-irq-pins { samsung,pins = "gpf1-3"; samsung,pin-function = <0xf>; }; @@ -1095,8 +1106,8 @@ pinctrl-0 = <&initial_cpif>; initial_cpif: initial-state { - PIN(INPUT, gpv6-0, DOWN, FAST_SR1); - PIN(INPUT, gpv6-1, DOWN, FAST_SR1); + PIN_IN(gpv6-0, DOWN, FAST_SR1); + PIN_IN(gpv6-1, DOWN, FAST_SR1); }; }; @@ -1104,13 +1115,16 @@ pinctrl-names = "default"; pinctrl-0 = <&initial_ese>; - pcie_wlanen: pcie-wlanen { - PIN(INPUT, gpj2-0, UP, FAST_SR4); + pcie_wlanen: pcie-wlanen-pins { + samsung,pins = "gpj2-0"; + samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>; + samsung,pin-pud = <EXYNOS_PIN_PULL_UP>; + samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR4>; }; initial_ese: initial-state { - PIN(INPUT, gpj2-1, DOWN, FAST_SR1); - PIN(INPUT, gpj2-2, DOWN, FAST_SR1); + PIN_IN(gpj2-1, DOWN, FAST_SR1); + PIN_IN(gpj2-2, DOWN, FAST_SR1); }; }; @@ -1119,11 +1133,11 @@ pinctrl-0 = <&initial_fsys>; initial_fsys: initial-state { - PIN(INPUT, gpr3-0, NONE, FAST_SR1); - PIN(INPUT, gpr3-1, DOWN, FAST_SR1); - PIN(INPUT, gpr3-2, DOWN, FAST_SR1); - PIN(INPUT, gpr3-3, DOWN, FAST_SR1); - PIN(INPUT, gpr3-7, NONE, FAST_SR1); + PIN_IN(gpr3-0, NONE, FAST_SR1); + PIN_IN(gpr3-1, DOWN, FAST_SR1); + PIN_IN(gpr3-2, DOWN, FAST_SR1); + PIN_IN(gpr3-3, DOWN, FAST_SR1); + PIN_IN(gpr3-7, NONE, FAST_SR1); }; }; @@ -1132,14 +1146,14 @@ pinctrl-0 = <&initial_imem>; initial_imem: initial-state { - PIN(INPUT, gpf0-0, UP, FAST_SR1); - PIN(INPUT, gpf0-1, UP, FAST_SR1); - PIN(INPUT, gpf0-2, DOWN, FAST_SR1); - PIN(INPUT, gpf0-3, UP, FAST_SR1); - PIN(INPUT, gpf0-4, DOWN, FAST_SR1); - PIN(INPUT, gpf0-5, NONE, FAST_SR1); - PIN(INPUT, gpf0-6, DOWN, FAST_SR1); - PIN(INPUT, gpf0-7, UP, FAST_SR1); + PIN_IN(gpf0-0, UP, FAST_SR1); + PIN_IN(gpf0-1, UP, FAST_SR1); + PIN_IN(gpf0-2, DOWN, FAST_SR1); + PIN_IN(gpf0-3, UP, FAST_SR1); + PIN_IN(gpf0-4, DOWN, FAST_SR1); + PIN_IN(gpf0-5, NONE, FAST_SR1); + PIN_IN(gpf0-6, DOWN, FAST_SR1); + PIN_IN(gpf0-7, UP, FAST_SR1); }; }; @@ -1148,7 +1162,7 @@ pinctrl-0 = <&initial_nfc>; initial_nfc: initial-state { - PIN(INPUT, gpj0-2, DOWN, FAST_SR1); + PIN_IN(gpj0-2, DOWN, FAST_SR1); }; }; @@ -1157,53 +1171,53 @@ pinctrl-0 = <&initial_peric>; initial_peric: initial-state { - PIN(INPUT, gpv7-0, DOWN, FAST_SR1); - PIN(INPUT, gpv7-1, DOWN, FAST_SR1); - PIN(INPUT, gpv7-2, NONE, FAST_SR1); - PIN(INPUT, gpv7-3, DOWN, FAST_SR1); - PIN(INPUT, gpv7-4, DOWN, FAST_SR1); - PIN(INPUT, gpv7-5, DOWN, FAST_SR1); + PIN_IN(gpv7-0, DOWN, FAST_SR1); + PIN_IN(gpv7-1, DOWN, FAST_SR1); + PIN_IN(gpv7-2, NONE, FAST_SR1); + PIN_IN(gpv7-3, DOWN, FAST_SR1); + PIN_IN(gpv7-4, DOWN, FAST_SR1); + PIN_IN(gpv7-5, DOWN, FAST_SR1); - PIN(INPUT, gpb0-4, DOWN, FAST_SR1); + PIN_IN(gpb0-4, DOWN, FAST_SR1); - PIN(INPUT, gpc0-2, DOWN, FAST_SR1); - PIN(INPUT, gpc0-5, DOWN, FAST_SR1); - PIN(INPUT, gpc0-7, DOWN, FAST_SR1); + PIN_IN(gpc0-2, DOWN, FAST_SR1); + PIN_IN(gpc0-5, DOWN, FAST_SR1); + PIN_IN(gpc0-7, DOWN, FAST_SR1); - PIN(INPUT, gpc1-1, DOWN, FAST_SR1); + PIN_IN(gpc1-1, DOWN, FAST_SR1); - PIN(INPUT, gpc3-4, NONE, FAST_SR1); - PIN(INPUT, gpc3-5, NONE, FAST_SR1); - PIN(INPUT, gpc3-6, NONE, FAST_SR1); - PIN(INPUT, gpc3-7, NONE, FAST_SR1); + PIN_IN(gpc3-4, NONE, FAST_SR1); + PIN_IN(gpc3-5, NONE, FAST_SR1); + PIN_IN(gpc3-6, NONE, FAST_SR1); + PIN_IN(gpc3-7, NONE, FAST_SR1); - PIN(OUTPUT, gpg0-0, NONE, FAST_SR1); - PIN(2, gpg0-1, DOWN, FAST_SR1); + PIN_OT(gpg0-0, NONE, FAST_SR1); + PIN_F2(gpg0-1, DOWN, FAST_SR1); - PIN(INPUT, gpd2-5, DOWN, FAST_SR1); + PIN_IN(gpd2-5, DOWN, FAST_SR1); - PIN(INPUT, gpd4-0, NONE, FAST_SR1); - PIN(INPUT, gpd4-1, DOWN, FAST_SR1); - PIN(INPUT, gpd4-2, DOWN, FAST_SR1); - PIN(INPUT, gpd4-3, DOWN, FAST_SR1); - PIN(INPUT, gpd4-4, DOWN, FAST_SR1); + PIN_IN(gpd4-0, NONE, FAST_SR1); + PIN_IN(gpd4-1, DOWN, FAST_SR1); + PIN_IN(gpd4-2, DOWN, FAST_SR1); + PIN_IN(gpd4-3, DOWN, FAST_SR1); + PIN_IN(gpd4-4, DOWN, FAST_SR1); - PIN(INPUT, gpd6-3, DOWN, FAST_SR1); + PIN_IN(gpd6-3, DOWN, FAST_SR1); - PIN(INPUT, gpd8-1, UP, FAST_SR1); + PIN_IN(gpd8-1, UP, FAST_SR1); - PIN(INPUT, gpg1-0, DOWN, FAST_SR1); - PIN(INPUT, gpg1-1, DOWN, FAST_SR1); - PIN(INPUT, gpg1-2, DOWN, FAST_SR1); - PIN(INPUT, gpg1-3, DOWN, FAST_SR1); - PIN(INPUT, gpg1-4, DOWN, FAST_SR1); + PIN_IN(gpg1-0, DOWN, FAST_SR1); + PIN_IN(gpg1-1, DOWN, FAST_SR1); + PIN_IN(gpg1-2, DOWN, FAST_SR1); + PIN_IN(gpg1-3, DOWN, FAST_SR1); + PIN_IN(gpg1-4, DOWN, FAST_SR1); - PIN(INPUT, gpg2-0, DOWN, FAST_SR1); - PIN(INPUT, gpg2-1, DOWN, FAST_SR1); + PIN_IN(gpg2-0, DOWN, FAST_SR1); + PIN_IN(gpg2-1, DOWN, FAST_SR1); - PIN(INPUT, gpg3-0, DOWN, FAST_SR1); - PIN(INPUT, gpg3-1, DOWN, FAST_SR1); - PIN(INPUT, gpg3-5, DOWN, FAST_SR1); + PIN_IN(gpg3-0, DOWN, FAST_SR1); + PIN_IN(gpg3-1, DOWN, FAST_SR1); + PIN_IN(gpg3-5, DOWN, FAST_SR1); }; }; @@ -1212,7 +1226,7 @@ pinctrl-0 = <&initial_touch>; initial_touch: initial-state { - PIN(INPUT, gpj1-2, DOWN, FAST_SR1); + PIN_IN(gpj1-2, DOWN, FAST_SR1); }; }; diff --git a/arch/arm64/boot/dts/exynos/exynos5433.dtsi b/arch/arm64/boot/dts/exynos/exynos5433.dtsi index bfe4ed8a23d6..661567d2dd7a 100644 --- a/arch/arm64/boot/dts/exynos/exynos5433.dtsi +++ b/arch/arm64/boot/dts/exynos/exynos5433.dtsi @@ -1858,7 +1858,7 @@ status = "disabled"; }; - pdma0: pdma@15610000 { + pdma0: dma-controller@15610000 { compatible = "arm,pl330", "arm,primecell"; reg = <0x15610000 0x1000>; interrupts = <GIC_SPI 228 IRQ_TYPE_LEVEL_HIGH>; @@ -1869,7 +1869,7 @@ #dma-requests = <32>; }; - pdma1: pdma@15600000 { + pdma1: dma-controller@15600000 { compatible = "arm,pl330", "arm,primecell"; reg = <0x15600000 0x1000>; interrupts = <GIC_SPI 246 IRQ_TYPE_LEVEL_HIGH>; @@ -1885,13 +1885,12 @@ reg = <0x11400000 0x100>, <0x11500000 0x08>; clocks = <&cmu_aud CLK_PCLK_SFR0_CTRL>; clock-names = "sfr0_ctrl"; - samsung,pmu-syscon = <&pmu_system_controller>; power-domains = <&pd_aud>; #address-cells = <1>; #size-cells = <1>; ranges; - adma: adma@11420000 { + adma: dma-controller@11420000 { compatible = "arm,pl330", "arm,primecell"; reg = <0x11420000 0x1000>; interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>; diff --git a/arch/arm64/boot/dts/exynos/exynos7-espresso.dts b/arch/arm64/boot/dts/exynos/exynos7-espresso.dts index 125c03f351d9..0895e818d3c1 100644 --- a/arch/arm64/boot/dts/exynos/exynos7-espresso.dts +++ b/arch/arm64/boot/dts/exynos/exynos7-espresso.dts @@ -354,7 +354,7 @@ }; &pinctrl_alive { - pmic_irq: pmic-irq { + pmic_irq: pmic-irq-pins { samsung,pins = "gpa0-2"; samsung,pin-pud = <EXYNOS_PIN_PULL_UP>; samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>; @@ -393,14 +393,14 @@ }; &pinctrl_bus1 { - usb30_vbus_en: usb30-vbus-en { + usb30_vbus_en: usb30-vbus-en-pins { samsung,pins = "gph1-1"; samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>; samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>; }; - usb3drd_boost_en: usb3drd-boost-en { + usb3drd_boost_en: usb3drd-boost-en-pins { samsung,pins = "gpf4-1"; samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>; samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; @@ -412,6 +412,11 @@ status = "okay"; }; +&usbdrd { + vdd10-supply = <&ldo4_reg>; + vdd33-supply = <&ldo6_reg>; +}; + &usbdrd_phy { vbus-supply = <&usb30_vbus_reg>; vbus-boost-supply = <&usb3drd_boost_5v>; diff --git a/arch/arm64/boot/dts/exynos/exynos7-pinctrl.dtsi b/arch/arm64/boot/dts/exynos/exynos7-pinctrl.dtsi index 472dd649aa7e..be9b971f3697 100644 --- a/arch/arm64/boot/dts/exynos/exynos7-pinctrl.dtsi +++ b/arch/arm64/boot/dts/exynos/exynos7-pinctrl.dtsi @@ -12,7 +12,7 @@ #include <dt-bindings/pinctrl/samsung.h> &pinctrl_alive { - gpa0: gpa0 { + gpa0: gpa0-gpio-bank { gpio-controller; #gpio-cells = <2>; @@ -29,7 +29,7 @@ <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>; }; - gpa1: gpa1 { + gpa1: gpa1-gpio-bank { gpio-controller; #gpio-cells = <2>; @@ -46,7 +46,7 @@ <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>; }; - gpa2: gpa2 { + gpa2: gpa2-gpio-bank { gpio-controller; #gpio-cells = <2>; @@ -54,7 +54,7 @@ #interrupt-cells = <2>; }; - gpa3: gpa3 { + gpa3: gpa3-gpio-bank { gpio-controller; #gpio-cells = <2>; @@ -64,7 +64,7 @@ }; &pinctrl_bus0 { - gpb0: gpb0 { + gpb0: gpb0-gpio-bank { gpio-controller; #gpio-cells = <2>; @@ -72,7 +72,7 @@ #interrupt-cells = <2>; }; - gpc0: gpc0 { + gpc0: gpc0-gpio-bank { gpio-controller; #gpio-cells = <2>; @@ -80,7 +80,7 @@ #interrupt-cells = <2>; }; - gpc1: gpc1 { + gpc1: gpc1-gpio-bank { gpio-controller; #gpio-cells = <2>; @@ -88,7 +88,7 @@ #interrupt-cells = <2>; }; - gpc2: gpc2 { + gpc2: gpc2-gpio-bank { gpio-controller; #gpio-cells = <2>; @@ -96,7 +96,7 @@ #interrupt-cells = <2>; }; - gpc3: gpc3 { + gpc3: gpc3-gpio-bank { gpio-controller; #gpio-cells = <2>; @@ -104,7 +104,7 @@ #interrupt-cells = <2>; }; - gpd0: gpd0 { + gpd0: gpd0-gpio-bank { gpio-controller; #gpio-cells = <2>; @@ -112,7 +112,7 @@ #interrupt-cells = <2>; }; - gpd1: gpd1 { + gpd1: gpd1-gpio-bank { gpio-controller; #gpio-cells = <2>; @@ -120,7 +120,7 @@ #interrupt-cells = <2>; }; - gpd2: gpd2 { + gpd2: gpd2-gpio-bank { gpio-controller; #gpio-cells = <2>; @@ -128,7 +128,7 @@ #interrupt-cells = <2>; }; - gpd4: gpd4 { + gpd4: gpd4-gpio-bank { gpio-controller; #gpio-cells = <2>; @@ -136,7 +136,7 @@ #interrupt-cells = <2>; }; - gpd5: gpd5 { + gpd5: gpd5-gpio-bank { gpio-controller; #gpio-cells = <2>; @@ -144,7 +144,7 @@ #interrupt-cells = <2>; }; - gpd6: gpd6 { + gpd6: gpd6-gpio-bank { gpio-controller; #gpio-cells = <2>; @@ -152,7 +152,7 @@ #interrupt-cells = <2>; }; - gpd7: gpd7 { + gpd7: gpd7-gpio-bank { gpio-controller; #gpio-cells = <2>; @@ -160,7 +160,7 @@ #interrupt-cells = <2>; }; - gpd8: gpd8 { + gpd8: gpd8-gpio-bank { gpio-controller; #gpio-cells = <2>; @@ -168,7 +168,7 @@ #interrupt-cells = <2>; }; - gpg0: gpg0 { + gpg0: gpg0-gpio-bank { gpio-controller; #gpio-cells = <2>; @@ -176,7 +176,7 @@ #interrupt-cells = <2>; }; - gpg3: gpg3 { + gpg3: gpg3-gpio-bank { gpio-controller; #gpio-cells = <2>; @@ -184,161 +184,161 @@ #interrupt-cells = <2>; }; - hs_i2c10_bus: hs-i2c10-bus { + hs_i2c10_bus: hs-i2c10-bus-pins { samsung,pins = "gpb0-1", "gpb0-0"; samsung,pin-function = <EXYNOS_PIN_FUNC_2>; samsung,pin-pud = <EXYNOS_PIN_PULL_UP>; samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>; }; - hs_i2c11_bus: hs-i2c11-bus { + hs_i2c11_bus: hs-i2c11-bus-pins { samsung,pins = "gpb0-3", "gpb0-2"; samsung,pin-function = <EXYNOS_PIN_FUNC_2>; samsung,pin-pud = <EXYNOS_PIN_PULL_UP>; samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>; }; - hs_i2c2_bus: hs-i2c2-bus { + hs_i2c2_bus: hs-i2c2-bus-pins { samsung,pins = "gpd0-3", "gpd0-2"; samsung,pin-function = <EXYNOS_PIN_FUNC_3>; samsung,pin-pud = <EXYNOS_PIN_PULL_UP>; samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>; }; - uart0_data: uart0-data { + uart0_data: uart0-data-pins { samsung,pins = "gpd0-0", "gpd0-1"; samsung,pin-function = <EXYNOS_PIN_FUNC_2>; samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>; }; - uart0_fctl: uart0-fctl { + uart0_fctl: uart0-fctl-pins { samsung,pins = "gpd0-2", "gpd0-3"; samsung,pin-function = <EXYNOS_PIN_FUNC_2>; samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>; }; - uart2_data: uart2-data { + uart2_data: uart2-data-pins { samsung,pins = "gpd1-4", "gpd1-5"; samsung,pin-function = <EXYNOS_PIN_FUNC_2>; samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>; }; - hs_i2c3_bus: hs-i2c3-bus { + hs_i2c3_bus: hs-i2c3-bus-pins { samsung,pins = "gpd1-3", "gpd1-2"; samsung,pin-function = <EXYNOS_PIN_FUNC_3>; samsung,pin-pud = <EXYNOS_PIN_PULL_UP>; samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>; }; - uart1_data: uart1-data { + uart1_data: uart1-data-pins { samsung,pins = "gpd1-0", "gpd1-1"; samsung,pin-function = <EXYNOS_PIN_FUNC_2>; samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>; }; - uart1_fctl: uart1-fctl { + uart1_fctl: uart1-fctl-pins { samsung,pins = "gpd1-2", "gpd1-3"; samsung,pin-function = <EXYNOS_PIN_FUNC_2>; samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>; }; - hs_i2c0_bus: hs-i2c0-bus { + hs_i2c0_bus: hs-i2c0-bus-pins { samsung,pins = "gpd2-1", "gpd2-0"; samsung,pin-function = <EXYNOS_PIN_FUNC_2>; samsung,pin-pud = <EXYNOS_PIN_PULL_UP>; samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>; }; - hs_i2c1_bus: hs-i2c1-bus { + hs_i2c1_bus: hs-i2c1-bus-pins { samsung,pins = "gpd2-3", "gpd2-2"; samsung,pin-function = <EXYNOS_PIN_FUNC_2>; samsung,pin-pud = <EXYNOS_PIN_PULL_UP>; samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>; }; - hs_i2c9_bus: hs-i2c9-bus { + hs_i2c9_bus: hs-i2c9-bus-pins { samsung,pins = "gpd2-7", "gpd2-6"; samsung,pin-function = <EXYNOS_PIN_FUNC_3>; samsung,pin-pud = <EXYNOS_PIN_PULL_UP>; samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>; }; - pwm0_out: pwm0-out { + pwm0_out: pwm0-out-pins { samsung,pins = "gpd2-4"; samsung,pin-function = <EXYNOS_PIN_FUNC_2>; samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>; }; - pwm1_out: pwm1-out { + pwm1_out: pwm1-out-pins { samsung,pins = "gpd2-5"; samsung,pin-function = <EXYNOS_PIN_FUNC_2>; samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>; }; - pwm2_out: pwm2-out { + pwm2_out: pwm2-out-pins { samsung,pins = "gpd2-6"; samsung,pin-function = <EXYNOS_PIN_FUNC_2>; samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>; }; - pwm3_out: pwm3-out { + pwm3_out: pwm3-out-pins { samsung,pins = "gpd2-7"; samsung,pin-function = <EXYNOS_PIN_FUNC_2>; samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>; }; - hs_i2c8_bus: hs-i2c8-bus { + hs_i2c8_bus: hs-i2c8-bus-pins { samsung,pins = "gpd5-3", "gpd5-2"; samsung,pin-function = <EXYNOS_PIN_FUNC_3>; samsung,pin-pud = <EXYNOS_PIN_PULL_UP>; samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>; }; - uart3_data: uart3-data { + uart3_data: uart3-data-pins { samsung,pins = "gpd5-0", "gpd5-1"; samsung,pin-function = <EXYNOS_PIN_FUNC_3>; samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>; }; - spi2_bus: spi2-bus { + spi2_bus: spi2-bus-pins { samsung,pins = "gpd5-0", "gpd5-1", "gpd5-2", "gpd5-3"; samsung,pin-function = <EXYNOS_PIN_FUNC_2>; samsung,pin-pud = <EXYNOS_PIN_PULL_UP>; samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>; }; - spi1_bus: spi1-bus { + spi1_bus: spi1-bus-pins { samsung,pins = "gpd6-2", "gpd6-3", "gpd6-4", "gpd6-5"; samsung,pin-function = <EXYNOS_PIN_FUNC_2>; samsung,pin-pud = <EXYNOS_PIN_PULL_UP>; samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>; }; - spi0_bus: spi0-bus { + spi0_bus: spi0-bus-pins { samsung,pins = "gpd8-0", "gpd8-1", "gpd6-0", "gpd6-1"; samsung,pin-function = <EXYNOS_PIN_FUNC_2>; samsung,pin-pud = <EXYNOS_PIN_PULL_UP>; samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>; }; - hs_i2c4_bus: hs-i2c4-bus { + hs_i2c4_bus: hs-i2c4-bus-pins { samsung,pins = "gpg3-1", "gpg3-0"; samsung,pin-function = <EXYNOS_PIN_FUNC_2>; samsung,pin-pud = <EXYNOS_PIN_PULL_UP>; samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>; }; - hs_i2c5_bus: hs-i2c5-bus { + hs_i2c5_bus: hs-i2c5-bus-pins { samsung,pins = "gpg3-3", "gpg3-2"; samsung,pin-function = <EXYNOS_PIN_FUNC_2>; samsung,pin-pud = <EXYNOS_PIN_PULL_UP>; @@ -347,7 +347,7 @@ }; &pinctrl_nfc { - gpj0: gpj0 { + gpj0: gpj0-gpio-bank { gpio-controller; #gpio-cells = <2>; @@ -355,7 +355,7 @@ #interrupt-cells = <2>; }; - hs_i2c6_bus: hs-i2c6-bus { + hs_i2c6_bus: hs-i2c6-bus-pins { samsung,pins = "gpj0-1", "gpj0-0"; samsung,pin-function = <EXYNOS_PIN_FUNC_2>; samsung,pin-pud = <EXYNOS_PIN_PULL_UP>; @@ -364,7 +364,7 @@ }; &pinctrl_touch { - gpj1: gpj1 { + gpj1: gpj1-gpio-bank { gpio-controller; #gpio-cells = <2>; @@ -372,7 +372,7 @@ #interrupt-cells = <2>; }; - hs_i2c7_bus: hs-i2c7-bus { + hs_i2c7_bus: hs-i2c7-bus-pins { samsung,pins = "gpj1-1", "gpj1-0"; samsung,pin-function = <EXYNOS_PIN_FUNC_2>; samsung,pin-pud = <EXYNOS_PIN_PULL_UP>; @@ -381,7 +381,7 @@ }; &pinctrl_ff { - gpg4: gpg4 { + gpg4: gpg4-gpio-bank { gpio-controller; #gpio-cells = <2>; @@ -389,7 +389,7 @@ #interrupt-cells = <2>; }; - spi3_bus: spi3-bus { + spi3_bus: spi3-bus-pins { samsung,pins = "gpg4-0", "gpg4-1", "gpg4-2", "gpg4-3"; samsung,pin-function = <EXYNOS_PIN_FUNC_2>; samsung,pin-pud = <EXYNOS_PIN_PULL_UP>; @@ -398,7 +398,7 @@ }; &pinctrl_ese { - gpv7: gpv7 { + gpv7: gpv7-gpio-bank { gpio-controller; #gpio-cells = <2>; @@ -406,7 +406,7 @@ #interrupt-cells = <2>; }; - spi4_bus: spi4-bus { + spi4_bus: spi4-bus-pins { samsung,pins = "gpv7-0", "gpv7-1", "gpv7-2", "gpv7-3"; samsung,pin-function = <EXYNOS_PIN_FUNC_2>; samsung,pin-pud = <EXYNOS_PIN_PULL_UP>; @@ -415,7 +415,7 @@ }; &pinctrl_fsys0 { - gpr4: gpr4 { + gpr4: gpr4-gpio-bank { gpio-controller; #gpio-cells = <2>; @@ -423,35 +423,35 @@ #interrupt-cells = <2>; }; - sd2_clk: sd2-clk { + sd2_clk: sd2-clk-pins { samsung,pins = "gpr4-0"; samsung,pin-function = <EXYNOS_PIN_FUNC_2>; samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>; }; - sd2_cmd: sd2-cmd { + sd2_cmd: sd2-cmd-pins { samsung,pins = "gpr4-1"; samsung,pin-function = <EXYNOS_PIN_FUNC_2>; samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>; }; - sd2_cd: sd2-cd { + sd2_cd: sd2-cd-pins { samsung,pins = "gpr4-2"; samsung,pin-function = <EXYNOS_PIN_FUNC_2>; samsung,pin-pud = <EXYNOS_PIN_PULL_UP>; samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>; }; - sd2_bus1: sd2-bus-width1 { + sd2_bus1: sd2-bus-width1-pins { samsung,pins = "gpr4-3"; samsung,pin-function = <EXYNOS_PIN_FUNC_2>; samsung,pin-pud = <EXYNOS_PIN_PULL_UP>; samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>; }; - sd2_bus4: sd2-bus-width4 { + sd2_bus4: sd2-bus-width4-pins { samsung,pins = "gpr4-4", "gpr4-5", "gpr4-6"; samsung,pin-function = <EXYNOS_PIN_FUNC_2>; samsung,pin-pud = <EXYNOS_PIN_PULL_UP>; @@ -460,7 +460,7 @@ }; &pinctrl_fsys1 { - gpr0: gpr0 { + gpr0: gpr0-gpio-bank { gpio-controller; #gpio-cells = <2>; @@ -468,7 +468,7 @@ #interrupt-cells = <2>; }; - gpr1: gpr1 { + gpr1: gpr1-gpio-bank { gpio-controller; #gpio-cells = <2>; @@ -476,7 +476,7 @@ #interrupt-cells = <2>; }; - gpr2: gpr2 { + gpr2: gpr2-gpio-bank { gpio-controller; #gpio-cells = <2>; @@ -484,7 +484,7 @@ #interrupt-cells = <2>; }; - gpr3: gpr3 { + gpr3: gpr3-gpio-bank { gpio-controller; #gpio-cells = <2>; @@ -492,105 +492,105 @@ #interrupt-cells = <2>; }; - sd0_clk: sd0-clk { + sd0_clk: sd0-clk-pins { samsung,pins = "gpr0-0"; samsung,pin-function = <EXYNOS_PIN_FUNC_2>; samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; samsung,pin-drv = <EXYNOS7_FSYS1_PIN_DRV_LV2>; }; - sd0_cmd: sd0-cmd { + sd0_cmd: sd0-cmd-pins { samsung,pins = "gpr0-1"; samsung,pin-function = <EXYNOS_PIN_FUNC_2>; samsung,pin-pud = <EXYNOS_PIN_PULL_UP>; samsung,pin-drv = <EXYNOS7_FSYS1_PIN_DRV_LV2>; }; - sd0_ds: sd0-ds { + sd0_ds: sd0-ds-pins { samsung,pins = "gpr0-2"; samsung,pin-function = <EXYNOS_PIN_FUNC_2>; samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>; samsung,pin-drv = <EXYNOS7_FSYS1_PIN_DRV_LV2>; }; - sd0_qrdy: sd0-qrdy { + sd0_qrdy: sd0-qrdy-pins { samsung,pins = "gpr0-3"; samsung,pin-function = <EXYNOS_PIN_FUNC_2>; samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>; samsung,pin-drv = <EXYNOS7_FSYS1_PIN_DRV_LV2>; }; - sd0_bus1: sd0-bus-width1 { + sd0_bus1: sd0-bus-width1-pins { samsung,pins = "gpr1-0"; samsung,pin-function = <EXYNOS_PIN_FUNC_2>; samsung,pin-pud = <EXYNOS_PIN_PULL_UP>; samsung,pin-drv = <EXYNOS7_FSYS1_PIN_DRV_LV2>; }; - sd0_bus4: sd0-bus-width4 { + sd0_bus4: sd0-bus-width4-pins { samsung,pins = "gpr1-1", "gpr1-2", "gpr1-3"; samsung,pin-function = <EXYNOS_PIN_FUNC_2>; samsung,pin-pud = <EXYNOS_PIN_PULL_UP>; samsung,pin-drv = <EXYNOS7_FSYS1_PIN_DRV_LV2>; }; - sd0_bus8: sd0-bus-width8 { + sd0_bus8: sd0-bus-width8-pins { samsung,pins = "gpr1-4", "gpr1-5", "gpr1-6", "gpr1-7"; samsung,pin-function = <EXYNOS_PIN_FUNC_2>; samsung,pin-pud = <EXYNOS_PIN_PULL_UP>; samsung,pin-drv = <EXYNOS7_FSYS1_PIN_DRV_LV2>; }; - sd1_clk: sd1-clk { + sd1_clk: sd1-clk-pins { samsung,pins = "gpr2-0"; samsung,pin-function = <EXYNOS_PIN_FUNC_2>; samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; samsung,pin-drv = <EXYNOS7_FSYS1_PIN_DRV_LV3>; }; - sd1_cmd: sd1-cmd { + sd1_cmd: sd1-cmd-pins { samsung,pins = "gpr2-1"; samsung,pin-function = <EXYNOS_PIN_FUNC_2>; samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; samsung,pin-drv = <EXYNOS7_FSYS1_PIN_DRV_LV3>; }; - sd1_ds: sd1-ds { + sd1_ds: sd1-ds-pins { samsung,pins = "gpr2-2"; samsung,pin-function = <EXYNOS_PIN_FUNC_2>; samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>; samsung,pin-drv = <EXYNOS7_FSYS1_PIN_DRV_LV4>; }; - sd1_qrdy: sd1-qrdy { + sd1_qrdy: sd1-qrdy-pins { samsung,pins = "gpr2-3"; samsung,pin-function = <EXYNOS_PIN_FUNC_2>; samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>; samsung,pin-drv = <EXYNOS7_FSYS1_PIN_DRV_LV4>; }; - sd1_int: sd1-int { + sd1_int: sd1-int-pins { samsung,pins = "gpr2-4"; samsung,pin-function = <EXYNOS_PIN_FUNC_2>; samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>; samsung,pin-drv = <EXYNOS7_FSYS1_PIN_DRV_LV4>; }; - sd1_bus1: sd1-bus-width1 { + sd1_bus1: sd1-bus-width1-pins { samsung,pins = "gpr3-0"; samsung,pin-function = <EXYNOS_PIN_FUNC_2>; samsung,pin-pud = <EXYNOS_PIN_PULL_UP>; samsung,pin-drv = <EXYNOS7_FSYS1_PIN_DRV_LV3>; }; - sd1_bus4: sd1-bus-width4 { + sd1_bus4: sd1-bus-width4-pins { samsung,pins = "gpr3-1", "gpr3-2", "gpr3-3"; samsung,pin-function = <EXYNOS_PIN_FUNC_2>; samsung,pin-pud = <EXYNOS_PIN_PULL_UP>; samsung,pin-drv = <EXYNOS7_FSYS1_PIN_DRV_LV3>; }; - sd1_bus8: sd1-bus-width8 { + sd1_bus8: sd1-bus-width8-pins { samsung,pins = "gpr3-4", "gpr3-5", "gpr3-6", "gpr3-7"; samsung,pin-function = <EXYNOS_PIN_FUNC_2>; samsung,pin-pud = <EXYNOS_PIN_PULL_UP>; @@ -599,7 +599,7 @@ }; &pinctrl_bus1 { - gpf0: gpf0 { + gpf0: gpf0-gpio-bank { gpio-controller; #gpio-cells = <2>; @@ -607,7 +607,7 @@ #interrupt-cells = <2>; }; - gpf1: gpf1 { + gpf1: gpf1-gpio-bank { gpio-controller; #gpio-cells = <2>; @@ -615,7 +615,7 @@ #interrupt-cells = <2>; }; - gpf2: gpf2 { + gpf2: gpf2-gpio-bank { gpio-controller; #gpio-cells = <2>; @@ -623,7 +623,7 @@ #interrupt-cells = <2>; }; - gpf3: gpf3 { + gpf3: gpf3-gpio-bank { gpio-controller; #gpio-cells = <2>; @@ -631,7 +631,7 @@ #interrupt-cells = <2>; }; - gpf4: gpf4 { + gpf4: gpf4-gpio-bank { gpio-controller; #gpio-cells = <2>; @@ -639,7 +639,7 @@ #interrupt-cells = <2>; }; - gpf5: gpf5 { + gpf5: gpf5-gpio-bank { gpio-controller; #gpio-cells = <2>; @@ -647,7 +647,7 @@ #interrupt-cells = <2>; }; - gpg1: gpg1 { + gpg1: gpg1-gpio-bank { gpio-controller; #gpio-cells = <2>; @@ -655,7 +655,7 @@ #interrupt-cells = <2>; }; - gpg2: gpg2 { + gpg2: gpg2-gpio-bank { gpio-controller; #gpio-cells = <2>; @@ -663,7 +663,7 @@ #interrupt-cells = <2>; }; - gph1: gph1 { + gph1: gph1-gpio-bank { gpio-controller; #gpio-cells = <2>; @@ -671,7 +671,7 @@ #interrupt-cells = <2>; }; - gpv6: gpv6 { + gpv6: gpv6-gpio-bank { gpio-controller; #gpio-cells = <2>; @@ -679,21 +679,21 @@ #interrupt-cells = <2>; }; - spi5_bus: spi5-bus { + spi5_bus: spi5-bus-pins { samsung,pins = "gpf2-0", "gpf2-1", "gpf2-2", "gpf2-3"; samsung,pin-function = <EXYNOS_PIN_FUNC_2>; samsung,pin-pud = <EXYNOS_PIN_PULL_UP>; samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>; }; - ufs_refclk_out: ufs-refclk-out { + ufs_refclk_out: ufs-refclk-out-pins { samsung,pins = "gpg2-4"; samsung,pin-function = <EXYNOS_PIN_FUNC_2>; samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; samsung,pin-drv = <EXYNOS4_PIN_DRV_LV2>; }; - ufs_rst_n: ufs-rst-n { + ufs_rst_n: ufs-rst-n-pins { samsung,pins = "gph1-5"; samsung,pin-function = <EXYNOS_PIN_FUNC_2>; samsung,pin-pud = <EXYNOS_PIN_PULL_UP>; diff --git a/arch/arm64/boot/dts/exynos/exynos7.dtsi b/arch/arm64/boot/dts/exynos/exynos7.dtsi index c3efbc8add38..e38bb02a2152 100644 --- a/arch/arm64/boot/dts/exynos/exynos7.dtsi +++ b/arch/arm64/boot/dts/exynos/exynos7.dtsi @@ -142,7 +142,7 @@ <0x11006000 0x2000>; }; - pdma0: pdma@10e10000 { + pdma0: dma-controller@10e10000 { compatible = "arm,pl330", "arm,primecell"; reg = <0x10E10000 0x1000>; interrupts = <GIC_SPI 225 IRQ_TYPE_LEVEL_HIGH>; @@ -153,7 +153,7 @@ #dma-requests = <32>; }; - pdma1: pdma@10eb0000 { + pdma1: dma-controller@10eb0000 { compatible = "arm,pl330", "arm,primecell"; reg = <0x10EB0000 0x1000>; interrupts = <GIC_SPI 226 IRQ_TYPE_LEVEL_HIGH>; @@ -177,10 +177,11 @@ clocks = <&fin_pll>, <&clock_topc DOUT_SCLK_BUS0_PLL>, <&clock_topc DOUT_SCLK_BUS1_PLL>, <&clock_topc DOUT_SCLK_CC_PLL>, - <&clock_topc DOUT_SCLK_MFC_PLL>; + <&clock_topc DOUT_SCLK_MFC_PLL>, + <&clock_topc DOUT_SCLK_AUD_PLL>; clock-names = "fin_pll", "dout_sclk_bus0_pll", "dout_sclk_bus1_pll", "dout_sclk_cc_pll", - "dout_sclk_mfc_pll"; + "dout_sclk_mfc_pll", "dout_sclk_aud_pll"; }; clock_top1: clock-controller@105e0000 { @@ -218,12 +219,32 @@ compatible = "samsung,exynos7-clock-peric1"; reg = <0x14c80000 0xd00>; #clock-cells = <1>; - clocks = <&fin_pll>, <&clock_top0 DOUT_ACLK_PERIC1>, + clocks = <&fin_pll>, + <&clock_top0 DOUT_ACLK_PERIC1>, <&clock_top0 CLK_SCLK_UART1>, <&clock_top0 CLK_SCLK_UART2>, - <&clock_top0 CLK_SCLK_UART3>; - clock-names = "fin_pll", "dout_aclk_peric1_66", - "sclk_uart1", "sclk_uart2", "sclk_uart3"; + <&clock_top0 CLK_SCLK_UART3>, + <&clock_top0 CLK_SCLK_SPI0>, + <&clock_top0 CLK_SCLK_SPI1>, + <&clock_top0 CLK_SCLK_SPI2>, + <&clock_top0 CLK_SCLK_SPI3>, + <&clock_top0 CLK_SCLK_SPI4>, + <&clock_top0 CLK_SCLK_I2S1>, + <&clock_top0 CLK_SCLK_PCM1>, + <&clock_top0 CLK_SCLK_SPDIF>; + clock-names = "fin_pll", + "dout_aclk_peric1_66", + "sclk_uart1", + "sclk_uart2", + "sclk_uart3", + "sclk_spi0", + "sclk_spi1", + "sclk_spi2", + "sclk_spi3", + "sclk_spi4", + "sclk_i2s1", + "sclk_pcm1", + "sclk_spdif"; }; clock_peris: clock-controller@10040000 { @@ -663,16 +684,15 @@ reg = <0x15500000 0x100>; clocks = <&clock_fsys0 ACLK_USBDRD300>, <&clock_fsys0 OSCCLK_PHY_CLKOUT_USB30_PHY>, - <&clock_fsys0 PHYCLK_USBDRD300_UDRD30_PIPE_PCLK_USER>, <&clock_fsys0 PHYCLK_USBDRD300_UDRD30_PHYCLK_USER>, + <&clock_fsys0 PHYCLK_USBDRD300_UDRD30_PIPE_PCLK_USER>, <&clock_fsys0 SCLK_USBDRD300_REFCLK>; - clock-names = "phy", "ref", "phy_pipe", - "phy_utmi", "itp"; + clock-names = "phy", "ref", "phy_utmi", "phy_pipe", "itp"; samsung,pmu-syscon = <&pmu_system_controller>; #phy-cells = <1>; }; - usbdrd3 { + usbdrd: usb { compatible = "samsung,exynos7-dwusb3"; clocks = <&clock_fsys0 ACLK_USBDRD300>, <&clock_fsys0 SCLK_USBDRD300_SUSPENDCLK>, diff --git a/arch/arm64/boot/dts/exynos/exynos7885-jackpotlte.dts b/arch/arm64/boot/dts/exynos/exynos7885-jackpotlte.dts new file mode 100644 index 000000000000..4cf9aa25f618 --- /dev/null +++ b/arch/arm64/boot/dts/exynos/exynos7885-jackpotlte.dts @@ -0,0 +1,92 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Samsung Galaxy A8 2018 (jackpotlte/SM-A530F) device tree source + * + * Copyright (c) 2021 Samsung Electronics Co., Ltd. + * Copyright (c) 2021 Dávid Virág + */ + +/dts-v1/; +#include "exynos7885.dtsi" +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/input.h> +#include <dt-bindings/interrupt-controller/irq.h> + +/ { + model = "Samsung Galaxy A8 (2018)"; + compatible = "samsung,jackpotlte", "samsung,exynos7885"; + chassis-type = "handset"; + + aliases { + serial0 = &serial_0; + serial1 = &serial_1; + serial2 = &serial_2; + }; + + chosen { + stdout-path = &serial_2; + }; + + memory@80000000 { + device_type = "memory"; + reg = <0x0 0x80000000 0x3da00000>, + <0x0 0xc0000000 0x40000000>, + <0x8 0x80000000 0x40000000>; + }; + + gpio-keys { + compatible = "gpio-keys"; + pinctrl-names = "default"; + pinctrl-0 = <&key_volup &key_voldown &key_power>; + + volup-key { + label = "Volume Up"; + linux,code = <KEY_VOLUMEUP>; + gpios = <&gpa1 5 GPIO_ACTIVE_LOW>; + }; + + voldown-key { + label = "Volume Down"; + linux,code = <KEY_VOLUMEDOWN>; + gpios = <&gpa1 6 GPIO_ACTIVE_LOW>; + }; + + power-key { + label = "Power"; + linux,code = <KEY_POWER>; + gpios = <&gpa1 7 GPIO_ACTIVE_LOW>; + wakeup-source; + }; + }; +}; + +&oscclk { + clock-frequency = <26000000>; +}; + +&pinctrl_alive { + key_volup: key-volup-pins { + samsung,pins = "gpa1-5"; + samsung,pin-function = <EXYNOS_PIN_FUNC_F>; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>; + }; + + key_voldown: key-voldown-pins { + samsung,pins = "gpa1-6"; + samsung,pin-function = <EXYNOS_PIN_FUNC_F>; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>; + }; + + key_power: key-power-pins { + samsung,pins = "gpa1-7"; + samsung,pin-function = <EXYNOS_PIN_FUNC_F>; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>; + }; +}; + +&serial_2 { + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/exynos/exynos7885-pinctrl.dtsi b/arch/arm64/boot/dts/exynos/exynos7885-pinctrl.dtsi new file mode 100644 index 000000000000..a50c1dbd5545 --- /dev/null +++ b/arch/arm64/boot/dts/exynos/exynos7885-pinctrl.dtsi @@ -0,0 +1,855 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Samsung Exynos7885 SoC pin-mux and pin-config device tree source + * + * Copyright (c) 2017 Samsung Electronics Co., Ltd. + * Copyright (c) 2021 Dávid Virág + * + * Samsung's Exynos7885 SoC pin-mux and pin-config options are listed as + * device tree nodes in this file. + */ + +#include <dt-bindings/pinctrl/samsung.h> +#include <dt-bindings/interrupt-controller/arm-gic.h> + +&pinctrl_alive { + etc0: etc0-gpio-bank { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + etc1: etc1-gpio-bank { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpa0: gpa0-gpio-bank { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + interrupt-parent = <&gic>; + interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>; + }; + + gpa1: gpa1-gpio-bank { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + interrupt-parent = <&gic>; + interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>; + }; + + gpa2: gpa2-gpio-bank { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpq0: gpq0-gpio-bank { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + sim1_det_gpio: sim1-det-gpio-pins { + samsung,pins = "gpa2-5"; + samsung,pin-function = <EXYNOS_PIN_FUNC_F>; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + }; + + sim0_det_gpio: sim0-det-gpio-pins { + samsung,pins = "gpa2-6"; + samsung,pin-function = <EXYNOS_PIN_FUNC_F>; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + }; + + speedy_bus: speedy-bus-pins { + samsung,pins = "gpq0-2"; + samsung,pin-function = <EXYNOS_PIN_FUNC_2>; + samsung,pin-con-pdn = <EXYNOS_PIN_PDN_PREV>; + samsung,pin-pud = <EXYNOS_PIN_PULL_UP>; + samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>; + }; + + /* UART_DEBUG */ + uart2_bus: uart2-bus-pins { + samsung,pins = "gpq0-4", "gpq0-3"; + samsung,pin-function = <EXYNOS_PIN_FUNC_2>; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + }; +}; + +&pinctrl_dispaud { + gpb0: gpb0-gpio-bank { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpb1: gpb1-gpio-bank { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpb2: gpb2-gpio-bank { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + aud_codec_mclk: aud-codec-mclk-pins { + samsung,pins = "gpb0-0"; + samsung,pin-function = <EXYNOS_PIN_FUNC_2>; + samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>; + }; + + aud_codec_mclk_idle: aud-codec-mclk-idle-pins { + samsung,pins = "gpb0-0"; + samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>; + samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>; + }; + + aud_codec_bus: aud-codec-bus-pins { + samsung,pins = "gpb0-1", "gpb0-2", "gpb0-3", "gpb0-4"; + samsung,pin-function = <EXYNOS_PIN_FUNC_2>; + samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>; + }; + + aud_codec_bus_idle: aud-codec-bus-idle-pins { + samsung,pins = "gpb0-1", "gpb0-2", "gpb0-3", "gpb0-4"; + samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>; + samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>; + }; + + aud_loopback_bus: aud-loopback-bus-pins { + samsung,pins = "gpb1-0"; + samsung,pin-function = <EXYNOS_PIN_FUNC_2>; + samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>; + }; + + aud_loopback_bus_idle: aud-loopback-bus-idle-pins { + samsung,pins = "gpb1-0"; + samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>; + samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>; + }; + + aud_fm_bus: aud-fm-bus-pins { + samsung,pins = "gpb1-1", "gpb1-2", "gpb1-3"; + samsung,pin-function = <EXYNOS_PIN_FUNC_2>; + samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>; + }; + + aud_fm_bus_idle: aud-fm-bus-idle-pins { + samsung,pins = "gpb1-1", "gpb1-2", "gpb1-3"; + samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>; + samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>; + }; + + aud_spk_bus: aud-spk-bus-pins { + samsung,pins = "gpb2-0", "gpb2-1", "gpb2-2", "gpb2-3"; + samsung,pin-function = <EXYNOS_PIN_FUNC_2>; + samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>; + }; + + aud_spk_bus_idle: aud-spk-bus-idle-pins { + samsung,pins = "gpb2-0", "gpb2-1", "gpb2-2", "gpb2-3"; + samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>; + samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>; + }; +}; + +&pinctrl_fsys { + gpf0: gpf0-gpio-bank { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpf2: gpf2-gpio-bank { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpf3: gpf3-gpio-bank { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpf4: gpf4-gpio-bank { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + sd0_clk: sd0-clk-pins { + samsung,pins = "gpf0-0"; + samsung,pin-function = <EXYNOS_PIN_FUNC_2>; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV4>; + }; + + sd0_clk_fast_slew_rate_1x: sd0-clk-fast-slew-rate-1x-pins { + samsung,pins = "gpf0-0"; + samsung,pin-function = <EXYNOS_PIN_FUNC_2>; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>; + }; + + sd0_clk_fast_slew_rate_2x: sd0-clk-fast-slew-rate-2x-pins { + samsung,pins = "gpf0-0"; + samsung,pin-function = <EXYNOS_PIN_FUNC_2>; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV2>; + }; + + sd0_clk_fast_slew_rate_3x: sd0-clk-fast-slew-rate-3x-pins { + samsung,pins = "gpf0-0"; + samsung,pin-function = <EXYNOS_PIN_FUNC_2>; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV3>; + }; + + sd0_clk_fast_slew_rate_4x: sd0-clk-fast-slew-rate-4x-pins { + samsung,pins = "gpf0-0"; + samsung,pin-function = <EXYNOS_PIN_FUNC_2>; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV4>; + }; + + sd0_cmd: sd0-cmd-pins { + samsung,pins = "gpf0-1"; + samsung,pin-function = <EXYNOS_PIN_FUNC_2>; + samsung,pin-pud = <EXYNOS_PIN_PULL_UP>; + samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV4>; + }; + + sd0_rdqs: sd0-rdqs-pins { + samsung,pins = "gpf0-2"; + samsung,pin-function = <EXYNOS_PIN_FUNC_2>; + samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>; + samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV4>; + }; + + sd0_bus1: sd0-bus-width1-pins { + samsung,pins = "gpf2-0"; + samsung,pin-function = <EXYNOS_PIN_FUNC_2>; + samsung,pin-pud = <EXYNOS_PIN_PULL_UP>; + samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV4>; + }; + + sd0_bus4: sd0-bus-width4-pins { + samsung,pins = "gpf2-1", "gpf2-2", "gpf2-3"; + samsung,pin-function = <EXYNOS_PIN_FUNC_2>; + samsung,pin-pud = <EXYNOS_PIN_PULL_UP>; + samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV4>; + }; + + sd0_bus8: sd0-bus-width8-pins { + samsung,pins = "gpf2-4", "gpf2-5", "gpf2-6", "gpf2-7"; + samsung,pin-function = <EXYNOS_PIN_FUNC_2>; + samsung,pin-pud = <EXYNOS_PIN_PULL_UP>; + samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV4>; + }; + + sd1_clk: sd1-clk-pins { + samsung,pins = "gpf3-0"; + samsung,pin-function = <EXYNOS_PIN_FUNC_2>; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV3>; + }; + + sd1_clk_fast_slew_rate_1x: sd1-clk-fast-slew-rate-1x-pins { + samsung,pins = "gpf3-0"; + samsung,pin-function = <EXYNOS_PIN_FUNC_2>; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>; + }; + + sd1_clk_fast_slew_rate_2x: sd1-clk-fast-slew-rate-2x-pins { + samsung,pins = "gpf3-0"; + samsung,pin-function = <EXYNOS_PIN_FUNC_2>; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV2>; + }; + + sd1_clk_fast_slew_rate_3x: sd1-clk-fast-slew-rate-3x-pins { + samsung,pins = "gpf3-0"; + samsung,pin-function = <EXYNOS_PIN_FUNC_2>; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV3>; + }; + + sd1_clk_fast_slew_rate_4x: sd1-clk-fast-slew-rate-4x-pins { + samsung,pins = "gpf3-0"; + samsung,pin-function = <EXYNOS_PIN_FUNC_2>; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV4>; + }; + + sd1_cmd: sd1-cmd-pins { + samsung,pins = "gpf3-1"; + samsung,pin-function = <EXYNOS_PIN_FUNC_2>; + samsung,pin-pud = <EXYNOS_PIN_PULL_UP>; + samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV3>; + }; + + sd1_bus1: sd1-bus-width1-pins { + samsung,pins = "gpf3-2"; + samsung,pin-function = <EXYNOS_PIN_FUNC_2>; + samsung,pin-pud = <EXYNOS_PIN_PULL_UP>; + samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV3>; + }; + + sd1_bus4: sd1-bus-width4-pins { + samsung,pins = "gpf3-3", "gpf3-5"; + samsung,pin-function = <EXYNOS_PIN_FUNC_2>; + samsung,pin-pud = <EXYNOS_PIN_PULL_UP>; + samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV3>; + }; + + sd2_clk: sd2-clk-pins { + samsung,pins = "gpf4-0"; + samsung,pin-function = <EXYNOS_PIN_FUNC_2>; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV3>; + }; + + sd2_clk_fast_slew_rate_1x: sd2-clk-fast-slew-rate-1x-pins { + samsung,pins = "gpf4-0"; + samsung,pin-function = <EXYNOS_PIN_FUNC_2>; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>; + }; + + sd2_clk_fast_slew_rate_2x: sd2-clk-fast-slew-rate-2x-pins { + samsung,pins = "gpf4-0"; + samsung,pin-function = <EXYNOS_PIN_FUNC_2>; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV2>; + }; + + sd2_clk_fast_slew_rate_3x: sd2-clk-fast-slew-rate-3x-pins { + samsung,pins = "gpf4-0"; + samsung,pin-function = <EXYNOS_PIN_FUNC_2>; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV3>; + }; + + sd2_clk_fast_slew_rate_4x: sd2-clk-fast-slew-rate-4x-pins { + samsung,pins = "gpf4-0"; + samsung,pin-function = <EXYNOS_PIN_FUNC_2>; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV4>; + }; + + sd2_cmd: sd2-cmd-pins { + samsung,pins = "gpf4-1"; + samsung,pin-function = <EXYNOS_PIN_FUNC_2>; + samsung,pin-pud = <EXYNOS_PIN_PULL_UP>; + samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV3>; + }; + + sd2_bus1: sd2-bus-width1-pins { + samsung,pins = "gpf4-2"; + samsung,pin-function = <EXYNOS_PIN_FUNC_2>; + samsung,pin-pud = <EXYNOS_PIN_PULL_UP>; + samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV3>; + }; + + sd2_bus4: sd2-bus-width4-pins { + samsung,pins = "gpf4-3", "gpf4-4", "gpf4-5"; + samsung,pin-function = <EXYNOS_PIN_FUNC_2>; + samsung,pin-pud = <EXYNOS_PIN_PULL_UP>; + samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV3>; + }; +}; + +&pinctrl_top { + gpc0: gpc0-gpio-bank { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpc1: gpc1-gpio-bank { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpc2: gpc2-gpio-bank { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpg0: gpg0-gpio-bank { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpg1: gpg1-gpio-bank { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpg2: gpg2-gpio-bank { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpg3: gpg3-gpio-bank { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpg4: gpg4-gpio-bank { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpp0: gpp0-gpio-bank { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpp1: gpp1-gpio-bank { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpp2: gpp2-gpio-bank { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpp3: gpp3-gpio-bank { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpp4: gpp4-gpio-bank { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpp5: gpp5-gpio-bank { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpp6: gpp6-gpio-bank { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpp7: gpp7-gpio-bank { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpp8: gpp8-gpio-bank { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + hs_i2c0_bus: hs-i2c0-bus-pins { + samsung,pins = "gpc1-1", "gpc1-0"; + samsung,pin-function = <EXYNOS_PIN_FUNC_2>; + samsung,pin-con-pdn = <EXYNOS_PIN_PDN_OUT1>; + samsung,pin-pud-pdn = <EXYNOS_PIN_PULL_UP>; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>; + }; + + hs_i2c1_bus: hs-i2c1-bus-pins { + samsung,pins = "gpc1-3", "gpc1-2"; + samsung,pin-function = <EXYNOS_PIN_FUNC_2>; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>; + samsung,pin-con-pdn = <EXYNOS_PIN_PDN_OUT1>; + samsung,pin-pud-pdn = <EXYNOS_PIN_PULL_UP>; + }; + + hs_i2c2_bus: hs-i2c2-bus-pins { + samsung,pins = "gpc1-5", "gpc1-4"; + samsung,pin-function = <EXYNOS_PIN_FUNC_2>; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>; + samsung,pin-con-pdn = <EXYNOS_PIN_PDN_OUT1>; + samsung,pin-pud-pdn = <EXYNOS_PIN_PULL_UP>; + }; + + hs_i2c3_bus: hs-i2c3-bus-pins { + samsung,pins = "gpc1-7", "gpc1-6"; + samsung,pin-function = <EXYNOS_PIN_FUNC_2>; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>; + samsung,pin-con-pdn = <EXYNOS_PIN_PDN_OUT1>; + samsung,pin-pud-pdn = <EXYNOS_PIN_PULL_UP>; + }; + + /* USI0 UART */ + uart3_bus_single: uart3-bus-single-pins { + samsung,pins = "gpc2-3", "gpc2-2", "gpc2-1", "gpc2-0"; + samsung,pin-function = <EXYNOS_PIN_FUNC_2>; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + }; + + /* USI0 UART_HSI2C1 */ + uart3_bus_dual: uart3-bus-dual-pins { + samsung,pins = "gpc2-1", "gpc2-0"; + samsung,pin-function = <EXYNOS_PIN_FUNC_2>; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + }; + + /* USI0 HSI2C0 */ + hs_i2c4_bus: hs-i2c4-bus-pins { + samsung,pins = "gpc2-1", "gpc2-0"; + samsung,pin-function = <EXYNOS_PIN_FUNC_2>; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>; + samsung,pin-con-pdn = <EXYNOS_PIN_PDN_OUT1>; + samsung,pin-pud-pdn = <EXYNOS_PIN_PULL_UP>; + }; + + /* USI0 HSI2C1 */ + hs_i2c5_bus: hs-i2c5-bus-pins { + samsung,pins = "gpc2-3", "gpc2-2"; + samsung,pin-function = <EXYNOS_PIN_FUNC_2>; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>; + samsung,pin-con-pdn = <EXYNOS_PIN_PDN_OUT1>; + samsung,pin-pud-pdn = <EXYNOS_PIN_PULL_UP>; + }; + + /* USI0 SPI */ + spi2_bus: spi2-bus-pins { + samsung,pins = "gpc2-1", "gpc2-0", "gpc2-3"; + samsung,pin-function = <EXYNOS_PIN_FUNC_2>; + samsung,pin-pud = <EXYNOS_PIN_PULL_UP>; + samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>; + }; + + spi2_cs: spi2-cs-pins { + samsung,pins = "gpc2-2"; + samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>; + samsung,pin-pud = <EXYNOS_PIN_PULL_UP>; + samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>; + }; + + /* USI1 UART */ + uart4_bus_single: uart4-bus-single-pins { + samsung,pins = "gpc2-7", "gpc2-6", "gpc2-5", "gpc2-4"; + samsung,pin-function = <EXYNOS_PIN_FUNC_2>; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + }; + + /* USI1 UART_HSI2C1*/ + uart4_bus_dual: uart4-bus-dual-pins { + samsung,pins = "gpc2-5", "gpc2-4"; + samsung,pin-function = <EXYNOS_PIN_FUNC_2>; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + }; + + /* USI1 HSI2C0 */ + hs_i2c6_bus: hs-i2c6-bus-pins { + samsung,pins = "gpc2-5", "gpc2-4"; + samsung,pin-function = <EXYNOS_PIN_FUNC_2>; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>; + samsung,pin-con-pdn = <EXYNOS_PIN_PDN_OUT1>; + samsung,pin-pud-pdn = <EXYNOS_PIN_PULL_UP>; + }; + + /* USI1 HSI2C1 */ + hs_i2c7_bus: hs-i2c7-bus-pins { + samsung,pins = "gpc2-7", "gpc2-6"; + samsung,pin-function = <EXYNOS_PIN_FUNC_2>; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>; + samsung,pin-con-pdn = <EXYNOS_PIN_PDN_OUT1>; + samsung,pin-pud-pdn = <EXYNOS_PIN_PULL_UP>; + }; + + /* USI1 SPI */ + spi3_bus: spi3-bus-pins { + samsung,pins = "gpc2-5", "gpc2-4", "gpc2-7"; + samsung,pin-function = <EXYNOS_PIN_FUNC_2>; + samsung,pin-pud = <EXYNOS_PIN_PULL_UP>; + samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>; + }; + + spi3_cs: spi3-cs-pins { + samsung,pins = "gpc2-6"; + samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>; + samsung,pin-pud = <EXYNOS_PIN_PULL_UP>; + samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>; + }; + + fm_lna_en: fm-lna-en-pins { + samsung,pins = "gpg0-2"; + samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>; + samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>; + samsung,pin-con-pdn = <EXYNOS_PIN_PDN_PREV>; + samsung,pin-pud-pdn = <EXYNOS_PIN_PULL_UP>; + samsung,pin-val = <1>; + }; + + uart1_bus: uart1-bus-pins { + samsung,pins = "gpg1-3", "gpg1-2", "gpg1-1", "gpg1-0"; + samsung,pin-function = <EXYNOS_PIN_FUNC_2>; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + }; + + i2c7_bus: i2c7-bus-pins { + samsung,pins = "gpg1-5", "gpg1-4"; + samsung,pin-function = <EXYNOS_PIN_FUNC_2>; + samsung,pin-pud = <EXYNOS_PIN_PULL_UP>; + samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>; + }; + + aud_dmic_on: aud-dmic-on-pins { + samsung,pins = "gpg2-1"; + samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>; + samsung,pin-con-pdn = <EXYNOS_PIN_PDN_PREV>; + samsung,pin-val = <1>; + }; + + aud_dmic_off: aud-dmic-off-pins { + samsung,pins = "gpg2-1"; + samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>; + samsung,pin-con-pdn = <EXYNOS_PIN_PDN_PREV>; + samsung,pin-val = <0>; + }; + + /* UART_HEALTH */ + uart0_bus: uart0-bus-pins { + samsung,pins = "gpp0-3", "gpp0-2", "gpp0-1", "gpp0-0"; + samsung,pin-function = <EXYNOS_PIN_FUNC_2>; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + }; + + i2c0_bus: i2c0-bus-pins { + samsung,pins = "gpp1-1", "gpp1-0"; + samsung,pin-function = <EXYNOS_PIN_FUNC_2>; + samsung,pin-con-pdn = <EXYNOS_PIN_PDN_PREV>; + samsung,pin-pud = <EXYNOS_PIN_PULL_UP>; + samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>; + }; + + i2c1_bus: i2c1-bus-pins { + samsung,pins = "gpp1-3", "gpp1-2"; + samsung,pin-function = <EXYNOS_PIN_FUNC_2>; + samsung,pin-con-pdn = <EXYNOS_PIN_PDN_PREV>; + samsung,pin-pud = <EXYNOS_PIN_PULL_UP>; + samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>; + }; + + i2c2_bus: i2c2-bus-pins { + samsung,pins = "gpp2-1", "gpp2-0"; + samsung,pin-function = <EXYNOS_PIN_FUNC_2>; + samsung,pin-pud = <EXYNOS_PIN_PULL_UP>; + samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>; + }; + + i2c3_bus: i2c3-bus-pins { + samsung,pins = "gpp3-1", "gpp3-0"; + samsung,pin-function = <EXYNOS_PIN_FUNC_2>; + samsung,pin-pud = <EXYNOS_PIN_PULL_UP>; + samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>; + }; + + i2c4_bus: i2c4-bus-pins { + samsung,pins = "gpp4-1", "gpp4-0"; + samsung,pin-function = <EXYNOS_PIN_FUNC_2>; + samsung,pin-pud = <EXYNOS_PIN_PULL_UP>; + samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>; + }; + + i2c5_bus: i2c5-bus-pins { + samsung,pins = "gpp4-3", "gpp4-2"; + samsung,pin-function = <EXYNOS_PIN_FUNC_2>; + samsung,pin-pud = <EXYNOS_PIN_PULL_UP>; + samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>; + }; + + i2c6_bus: i2c6-bus-pins { + samsung,pins = "gpp4-5", "gpp4-4"; + samsung,pin-function = <EXYNOS_PIN_FUNC_2>; + samsung,pin-pud = <EXYNOS_PIN_PULL_UP>; + samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>; + }; + + /* SPI_ESE */ + spi0_bus: spi0-bus-pins { + samsung,pins = "gpp5-3", "gpp5-2", "gpp5-0"; + samsung,pin-function = <EXYNOS_PIN_FUNC_2>; + samsung,pin-pud = <EXYNOS_PIN_PULL_UP>; + samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>; + }; + + spi0_cs: spi0-cs-pins { + samsung,pins = "gpp5-1"; + samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>; + samsung,pin-pud = <EXYNOS_PIN_PULL_UP>; + samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>; + }; + + /* SPI_FP */ + spi1_bus: spi1-bus-pins { + samsung,pins = "gpp6-3", "gpp6-2", "gpp6-0"; + samsung,pin-function = <EXYNOS_PIN_FUNC_2>; + samsung,pin-pud = <EXYNOS_PIN_PULL_UP>; + samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>; + }; + + spi1_cs: spi1-cs-pins { + samsung,pins = "gpp6-1"; + samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>; + samsung,pin-pud = <EXYNOS_PIN_PULL_UP>; + samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>; + }; + + /* USI2 UART */ + uart5_bus_single: uart5-bus-single-pins { + samsung,pins = "gpp8-1", "gpp8-0", "gpp7-1", "gpp7-0"; + samsung,pin-function = <EXYNOS_PIN_FUNC_2>; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + }; + + /* USI2 UART_HSI2C1 */ + uart5_bus_dual: uart5-bus-dual-pins { + samsung,pins = "gpp7-1", "gpp7-0"; + samsung,pin-function = <EXYNOS_PIN_FUNC_2>; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + }; + + /* USI2 HSI2C0 */ + hs_i2c8_bus: hs-i2c8-bus-pins { + samsung,pins = "gpp7-1", "gpp7-0"; + samsung,pin-function = <EXYNOS_PIN_FUNC_2>; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>; + samsung,pin-con-pdn = <EXYNOS_PIN_PDN_OUT1>; + samsung,pin-pud-pdn = <EXYNOS_PIN_PULL_UP>; + }; + + /* USI2 HSI2C1 */ + hs_i2c9_bus: hs-i2c9-bus-pins { + samsung,pins = "gpp8-1", "gpp8-0"; + samsung,pin-function = <EXYNOS_PIN_FUNC_2>; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>; + samsung,pin-con-pdn = <EXYNOS_PIN_PDN_OUT1>; + samsung,pin-pud-pdn = <EXYNOS_PIN_PULL_UP>; + }; + + /* USI2 SPI */ + spi4_bus: spi4-bus-pins { + samsung,pins = "gpp7-1", "gpp7-0", "gpp8-1"; + samsung,pin-function = <EXYNOS_PIN_FUNC_2>; + samsung,pin-pud = <EXYNOS_PIN_PULL_UP>; + samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>; + }; + + spi4_cs: spi4-cs-pins { + samsung,pins = "gpp8-0"; + samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>; + samsung,pin-pud = <EXYNOS_PIN_PULL_UP>; + samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>; + }; +}; diff --git a/arch/arm64/boot/dts/exynos/exynos7885.dtsi b/arch/arm64/boot/dts/exynos/exynos7885.dtsi new file mode 100644 index 000000000000..3170661f5b67 --- /dev/null +++ b/arch/arm64/boot/dts/exynos/exynos7885.dtsi @@ -0,0 +1,423 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Samsung Exynos7885 SoC device tree source + * + * Copyright (c) 2021 Samsung Electronics Co., Ltd. + * Copyright (c) 2021 Dávid Virág + */ + +#include <dt-bindings/clock/exynos7885.h> +#include <dt-bindings/interrupt-controller/arm-gic.h> + +/ { + compatible = "samsung,exynos7885"; + #address-cells = <2>; + #size-cells = <1>; + + interrupt-parent = <&gic>; + + aliases { + pinctrl0 = &pinctrl_alive; + pinctrl1 = &pinctrl_dispaud; + pinctrl2 = &pinctrl_fsys; + pinctrl3 = &pinctrl_top; + }; + + arm-a53-pmu { + compatible = "arm,cortex-a53-pmu"; + interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 218 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 219 IRQ_TYPE_LEVEL_HIGH>; + interrupt-affinity = <&cpu0>, + <&cpu1>, + <&cpu2>, + <&cpu3>, + <&cpu4>, + <&cpu5>; + }; + + arm-a73-pmu { + compatible = "arm,cortex-a73-pmu"; + interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>; + interrupt-affinity = <&cpu6>, + <&cpu7>; + }; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu-map { + cluster0 { + core0 { + cpu = <&cpu0>; + }; + core1 { + cpu = <&cpu1>; + }; + core2 { + cpu = <&cpu2>; + }; + core3 { + cpu = <&cpu3>; + }; + core4 { + cpu = <&cpu4>; + }; + core5 { + cpu = <&cpu5>; + }; + }; + + cluster1 { + core0 { + cpu = <&cpu6>; + }; + core1 { + cpu = <&cpu7>; + }; + }; + }; + + cpu0: cpu@100 { + device_type = "cpu"; + compatible = "arm,cortex-a53"; + reg = <0x100>; + enable-method = "psci"; + }; + + cpu1: cpu@101 { + device_type = "cpu"; + compatible = "arm,cortex-a53"; + reg = <0x101>; + enable-method = "psci"; + }; + + cpu2: cpu@102 { + device_type = "cpu"; + compatible = "arm,cortex-a53"; + reg = <0x102>; + enable-method = "psci"; + }; + + cpu3: cpu@103 { + device_type = "cpu"; + compatible = "arm,cortex-a53"; + reg = <0x103>; + enable-method = "psci"; + }; + + cpu4: cpu@200 { + device_type = "cpu"; + compatible = "arm,cortex-a53"; + reg = <0x200>; + enable-method = "psci"; + }; + + cpu5: cpu@201 { + device_type = "cpu"; + compatible = "arm,cortex-a53"; + reg = <0x201>; + enable-method = "psci"; + }; + + cpu6: cpu@0 { + device_type = "cpu"; + compatible = "arm,cortex-a73"; + reg = <0x0>; + enable-method = "psci"; + }; + + cpu7: cpu@1 { + device_type = "cpu"; + compatible = "arm,cortex-a73"; + reg = <0x1>; + enable-method = "psci"; + }; + }; + + psci { + compatible = "arm,psci"; + method = "smc"; + cpu_suspend = <0xc4000001>; + cpu_off = <0x84000002>; + cpu_on = <0xc4000003>; + }; + + timer { + compatible = "arm,armv8-timer"; + /* Hypervisor Virtual Timer interrupt is not wired to GIC */ + interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>; + }; + + fixed-rate-clocks { + oscclk: osc-clock { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-output-names = "oscclk"; + }; + }; + + soc: soc@0 { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x0 0x0 0x20000000>; + + chipid@10000000 { + compatible = "samsung,exynos850-chipid"; + reg = <0x10000000 0x24>; + }; + + gic: interrupt-controller@12301000 { + compatible = "arm,gic-400"; + #interrupt-cells = <3>; + #address-cells = <0>; + interrupt-controller; + reg = <0x12301000 0x1000>, + <0x12302000 0x2000>, + <0x12304000 0x2000>, + <0x12306000 0x2000>; + interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(8) | + IRQ_TYPE_LEVEL_HIGH)>; + }; + + cmu_peri: clock-controller@10010000 { + compatible = "samsung,exynos7885-cmu-peri"; + reg = <0x10010000 0x8000>; + #clock-cells = <1>; + + clocks = <&oscclk>, + <&cmu_top CLK_DOUT_PERI_BUS>, + <&cmu_top CLK_DOUT_PERI_SPI0>, + <&cmu_top CLK_DOUT_PERI_SPI1>, + <&cmu_top CLK_DOUT_PERI_UART0>, + <&cmu_top CLK_DOUT_PERI_UART1>, + <&cmu_top CLK_DOUT_PERI_UART2>, + <&cmu_top CLK_DOUT_PERI_USI0>, + <&cmu_top CLK_DOUT_PERI_USI1>, + <&cmu_top CLK_DOUT_PERI_USI2>; + clock-names = "oscclk", + "dout_peri_bus", + "dout_peri_spi0", + "dout_peri_spi1", + "dout_peri_uart0", + "dout_peri_uart1", + "dout_peri_uart2", + "dout_peri_usi0", + "dout_peri_usi1", + "dout_peri_usi2"; + }; + + cmu_core: clock-controller@12000000 { + compatible = "samsung,exynos7885-cmu-core"; + reg = <0x12000000 0x8000>; + #clock-cells = <1>; + + clocks = <&oscclk>, + <&cmu_top CLK_DOUT_CORE_BUS>, + <&cmu_top CLK_DOUT_CORE_CCI>, + <&cmu_top CLK_DOUT_CORE_G3D>; + clock-names = "oscclk", + "dout_core_bus", + "dout_core_cci", + "dout_core_g3d"; + }; + + cmu_top: clock-controller@12060000 { + compatible = "samsung,exynos7885-cmu-top"; + reg = <0x12060000 0x8000>; + #clock-cells = <1>; + + clocks = <&oscclk>; + clock-names = "oscclk"; + }; + + pinctrl_alive: pinctrl@11cb0000 { + compatible = "samsung,exynos7885-pinctrl"; + reg = <0x11cb0000 0x1000>; + + wakeup-interrupt-controller { + compatible = "samsung,exynos7-wakeup-eint"; + interrupt-parent = <&gic>; + interrupts = <GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH>; + }; + }; + + pinctrl_fsys: pinctrl@13430000 { + compatible = "samsung,exynos7885-pinctrl"; + reg = <0x13430000 0x1000>; + interrupts = <GIC_SPI 150 IRQ_TYPE_LEVEL_HIGH>; + }; + + pinctrl_top: pinctrl@139b0000 { + compatible = "samsung,exynos7885-pinctrl"; + reg = <0x139b0000 0x1000>; + interrupts = <GIC_SPI 266 IRQ_TYPE_LEVEL_HIGH>; + }; + + pinctrl_dispaud: pinctrl@148f0000 { + compatible = "samsung,exynos7885-pinctrl"; + reg = <0x148f0000 0x1000>; + interrupts = <GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH>; + }; + + pmu_system_controller: system-controller@11c80000 { + compatible = "samsung,exynos7-pmu", "syscon"; + reg = <0x11c80000 0x10000>; + }; + + serial_0: serial@13800000 { + compatible = "samsung,exynos5433-uart"; + reg = <0x13800000 0x100>; + interrupts = <GIC_SPI 246 IRQ_TYPE_LEVEL_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&uart0_bus>; + clocks = <&cmu_peri CLK_GOUT_UART0_EXT_UCLK>, + <&cmu_peri CLK_GOUT_UART0_PCLK>; + clock-names = "uart", "clk_uart_baud0"; + samsung,uart-fifosize = <64>; + status = "disabled"; + }; + + serial_1: serial@13810000 { + compatible = "samsung,exynos5433-uart"; + reg = <0x13810000 0x100>; + interrupts = <GIC_SPI 247 IRQ_TYPE_LEVEL_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&uart1_bus>; + clocks = <&cmu_peri CLK_GOUT_UART1_EXT_UCLK>, + <&cmu_peri CLK_GOUT_UART1_PCLK>; + clock-names = "uart", "clk_uart_baud0"; + samsung,uart-fifosize = <256>; + status = "disabled"; + }; + + serial_2: serial@13820000 { + compatible = "samsung,exynos5433-uart"; + reg = <0x13820000 0x100>; + interrupts = <GIC_SPI 279 IRQ_TYPE_LEVEL_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&uart2_bus>; + clocks = <&cmu_peri CLK_GOUT_UART2_EXT_UCLK>, + <&cmu_peri CLK_GOUT_UART2_PCLK>; + clock-names = "uart", "clk_uart_baud0"; + samsung,uart-fifosize = <256>; + status = "disabled"; + }; + + i2c_0: i2c@13830000 { + compatible = "samsung,s3c2440-i2c"; + reg = <0x13830000 0x100>; + interrupts = <GIC_SPI 248 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + pinctrl-names = "default"; + pinctrl-0 = <&i2c0_bus>; + clocks = <&cmu_peri CLK_GOUT_I2C0_PCLK>; + clock-names = "i2c"; + status = "disabled"; + }; + + i2c_1: i2c@13840000 { + compatible = "samsung,s3c2440-i2c"; + reg = <0x13840000 0x100>; + interrupts = <GIC_SPI 249 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + pinctrl-names = "default"; + pinctrl-0 = <&i2c1_bus>; + clocks = <&cmu_peri CLK_GOUT_I2C1_PCLK>; + clock-names = "i2c"; + status = "disabled"; + }; + + i2c_2: i2c@13850000 { + compatible = "samsung,s3c2440-i2c"; + reg = <0x13850000 0x100>; + interrupts = <GIC_SPI 250 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + pinctrl-names = "default"; + pinctrl-0 = <&i2c2_bus>; + clocks = <&cmu_peri CLK_GOUT_I2C2_PCLK>; + clock-names = "i2c"; + status = "disabled"; + }; + + i2c_3: i2c@13860000 { + compatible = "samsung,s3c2440-i2c"; + reg = <0x13860000 0x100>; + interrupts = <GIC_SPI 251 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + pinctrl-names = "default"; + pinctrl-0 = <&i2c3_bus>; + clocks = <&cmu_peri CLK_GOUT_I2C3_PCLK>; + clock-names = "i2c"; + status = "disabled"; + }; + + i2c_4: i2c@13870000 { + compatible = "samsung,s3c2440-i2c"; + reg = <0x13870000 0x100>; + interrupts = <GIC_SPI 252 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + pinctrl-names = "default"; + pinctrl-0 = <&i2c4_bus>; + clocks = <&cmu_peri CLK_GOUT_I2C4_PCLK>; + clock-names = "i2c"; + status = "disabled"; + }; + + i2c_5: i2c@13880000 { + compatible = "samsung,s3c2440-i2c"; + reg = <0x13880000 0x100>; + interrupts = <GIC_SPI 253 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + pinctrl-names = "default"; + pinctrl-0 = <&i2c5_bus>; + clocks = <&cmu_peri CLK_GOUT_I2C5_PCLK>; + clock-names = "i2c"; + status = "disabled"; + }; + + i2c_6: i2c@13890000 { + compatible = "samsung,s3c2440-i2c"; + reg = <0x13890000 0x100>; + interrupts = <GIC_SPI 254 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + pinctrl-names = "default"; + pinctrl-0 = <&i2c6_bus>; + clocks = <&cmu_peri CLK_GOUT_I2C6_PCLK>; + clock-names = "i2c"; + status = "disabled"; + }; + + i2c_7: i2c@11cd0000 { + compatible = "samsung,s3c2440-i2c"; + reg = <0x11cd0000 0x100>; + interrupts = <GIC_SPI 255 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + pinctrl-names = "default"; + pinctrl-0 = <&i2c7_bus>; + clocks = <&cmu_peri CLK_GOUT_I2C7_PCLK>; + clock-names = "i2c"; + status = "disabled"; + }; + }; +}; + +#include "exynos7885-pinctrl.dtsi" +#include "arm/exynos-syscon-restart.dtsi" diff --git a/arch/arm64/boot/dts/exynos/exynos850-e850-96.dts b/arch/arm64/boot/dts/exynos/exynos850-e850-96.dts new file mode 100644 index 000000000000..7b5a61d22cc5 --- /dev/null +++ b/arch/arm64/boot/dts/exynos/exynos850-e850-96.dts @@ -0,0 +1,195 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * WinLink E850-96 board device tree source + * + * Copyright (C) 2018 Samsung Electronics Co., Ltd. + * Copyright (C) 2021 Linaro Ltd. + * + * Device tree source file for WinLink's E850-96 board which is based on + * Samsung Exynos850 SoC. + */ + +/dts-v1/; + +#include "exynos850.dtsi" +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/input.h> +#include <dt-bindings/leds/common.h> + +/ { + model = "WinLink E850-96 board"; + compatible = "winlink,e850-96", "samsung,exynos850"; + + chosen { + stdout-path = &serial_0; + }; + + /* + * RAM: 4 GiB (eMCP): + * - 2 GiB at 0x80000000 + * - 2 GiB at 0x880000000 + * + * 0xbab00000..0xbfffffff: secure memory (85 MiB). + */ + memory@80000000 { + device_type = "memory"; + reg = <0x0 0x80000000 0x3ab00000>, + <0x0 0xc0000000 0x40000000>, + <0x8 0x80000000 0x80000000>; + }; + + gpio-keys { + compatible = "gpio-keys"; + pinctrl-names = "default"; + pinctrl-0 = <&key_voldown_pins &key_volup_pins>; + + volume-down-key { + label = "Volume Down"; + linux,code = <KEY_VOLUMEDOWN>; + gpios = <&gpa1 0 GPIO_ACTIVE_LOW>; + }; + + volume-up-key { + label = "Volume Up"; + linux,code = <KEY_VOLUMEUP>; + gpios = <&gpa0 7 GPIO_ACTIVE_LOW>; + }; + }; + + leds { + compatible = "gpio-leds"; + + /* HEART_BEAT_LED */ + user_led1: led-1 { + label = "yellow:user1"; + gpios = <&gpg2 2 GPIO_ACTIVE_HIGH>; + color = <LED_COLOR_ID_YELLOW>; + function = LED_FUNCTION_HEARTBEAT; + linux,default-trigger = "heartbeat"; + }; + + /* eMMC_LED */ + user_led2: led-2 { + label = "yellow:user2"; + gpios = <&gpg2 3 GPIO_ACTIVE_HIGH>; + color = <LED_COLOR_ID_YELLOW>; + linux,default-trigger = "mmc0"; + }; + + /* SD_LED */ + user_led3: led-3 { + label = "white:user3"; + gpios = <&gpg2 4 GPIO_ACTIVE_HIGH>; + color = <LED_COLOR_ID_WHITE>; + function = LED_FUNCTION_SD; + linux,default-trigger = "mmc2"; + }; + + /* WIFI_LED */ + wlan_active_led: led-4 { + label = "yellow:wlan"; + gpios = <&gpg2 6 GPIO_ACTIVE_HIGH>; + color = <LED_COLOR_ID_YELLOW>; + function = LED_FUNCTION_WLAN; + linux,default-trigger = "phy0tx"; + default-state = "off"; + }; + + /* BLUETOOTH_LED */ + bt_active_led: led-5 { + label = "blue:bt"; + gpios = <&gpg2 7 GPIO_ACTIVE_HIGH>; + color = <LED_COLOR_ID_BLUE>; + function = LED_FUNCTION_BLUETOOTH; + linux,default-trigger = "hci0rx"; + default-state = "off"; + }; + }; + + /* + * RTC clock (XrtcXTI); external, must be 32.768 kHz. + * + * TODO: Remove this once RTC clock is implemented properly as part of + * PMIC driver. + */ + rtcclk: clock-rtcclk { + compatible = "fixed-clock"; + clock-output-names = "rtcclk"; + #clock-cells = <0>; + clock-frequency = <32768>; + }; +}; + +&cmu_hsi { + clocks = <&oscclk>, <&rtcclk>, + <&cmu_top CLK_DOUT_HSI_BUS>, + <&cmu_top CLK_DOUT_HSI_MMC_CARD>, + <&cmu_top CLK_DOUT_HSI_USB20DRD>; + clock-names = "oscclk", "rtcclk", "dout_hsi_bus", + "dout_hsi_mmc_card", "dout_hsi_usb20drd"; +}; + +&mmc_0 { + status = "okay"; + mmc-hs200-1_8v; + mmc-hs400-1_8v; + cap-mmc-highspeed; + non-removable; + mmc-hs400-enhanced-strobe; + card-detect-delay = <200>; + clock-frequency = <800000000>; + bus-width = <8>; + samsung,dw-mshc-ciu-div = <3>; + samsung,dw-mshc-sdr-timing = <0 4>; + samsung,dw-mshc-ddr-timing = <2 4>; + samsung,dw-mshc-hs400-timing = <0 2>; + + pinctrl-names = "default"; + pinctrl-0 = <&sd0_clk_pins &sd0_cmd_pins &sd0_rdqs_pins &sd0_nreset_pins + &sd0_bus1_pins &sd0_bus4_pins &sd0_bus8_pins>; +}; + +&oscclk { + clock-frequency = <26000000>; +}; + +&pinctrl_alive { + key_voldown_pins: key-voldown-pins { + samsung,pins = "gpa1-0"; + samsung,pin-function = <EXYNOS_PIN_FUNC_EINT>; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>; + }; + + key_volup_pins: key-volup-pins { + samsung,pins = "gpa0-7"; + samsung,pin-function = <EXYNOS_PIN_FUNC_EINT>; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>; + }; +}; + +&rtc { + status = "okay"; + clocks = <&cmu_apm CLK_GOUT_RTC_PCLK>, <&rtcclk>; + clock-names = "rtc", "rtc_src"; +}; + +&serial_0 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&uart1_pins>; +}; + +&usi_uart { + samsung,clkreq-on; /* needed for UART mode */ + status = "okay"; +}; + +&watchdog_cl0 { + status = "okay"; +}; + +&watchdog_cl1 { + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/exynos/exynos850-pinctrl.dtsi b/arch/arm64/boot/dts/exynos/exynos850-pinctrl.dtsi new file mode 100644 index 000000000000..f43e4a206282 --- /dev/null +++ b/arch/arm64/boot/dts/exynos/exynos850-pinctrl.dtsi @@ -0,0 +1,663 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Samsung's Exynos850 SoC pin-mux and pin-config device tree source + * + * Copyright (C) 2017 Samsung Electronics Co., Ltd. + * Copyright (C) 2021 Linaro Ltd. + * + * Samsung's Exynos850 SoC pin-mux and pin-config options are listed as device + * tree nodes in this file. + */ + +#include <dt-bindings/interrupt-controller/arm-gic.h> +#include <dt-bindings/pinctrl/samsung.h> + +&pinctrl_alive { + gpa0: gpa0-gpio-bank { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + interrupt-parent = <&gic>; + interrupts = <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>; + }; + + gpa1: gpa1-gpio-bank { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + interrupt-parent = <&gic>; + interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>; + }; + + gpa2: gpa2-gpio-bank { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + interrupt-parent = <&gic>; + interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>; + }; + + gpa3: gpa3-gpio-bank { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + interrupt-parent = <&gic>; + interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>; + }; + + gpa4: gpa4-gpio-bank { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + interrupt-parent = <&gic>; + interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>; + }; + + gpq0: gpq0-gpio-bank { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + /* I2C5 (also called CAM_PMIC_I2C in TRM) */ + i2c5_pins: i2c5-pins { + samsung,pins = "gpa3-5", "gpa3-6"; + samsung,pin-function = <EXYNOS_PIN_FUNC_3>; + samsung,pin-pud = <EXYNOS_PIN_PULL_UP>; + samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>; + }; + + /* I2C6 (also called MOTOR_I2C in TRM) */ + i2c6_pins: i2c6-pins { + samsung,pins = "gpa3-7", "gpa4-0"; + samsung,pin-function = <EXYNOS_PIN_FUNC_3>; + samsung,pin-pud = <EXYNOS_PIN_PULL_UP>; + samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>; + }; + + /* USI: UART_DEBUG_0 pins */ + uart0_pins: uart0-pins { + samsung,pins = "gpq0-0", "gpq0-1"; + samsung,pin-function = <EXYNOS_PIN_FUNC_2>; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + }; + + /* USI: UART_DEBUG_1 pins */ + uart1_pins: uart1-pins { + samsung,pins = "gpa3-7", "gpa4-0"; + samsung,pin-function = <EXYNOS_PIN_FUNC_2>; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + }; +}; + +&pinctrl_cmgp { + gpm0: gpm0-gpio-bank { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + interrupt-parent = <&gic>; + interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>; + }; + + gpm1: gpm1-gpio-bank { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + interrupt-parent = <&gic>; + interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>; + }; + + gpm2: gpm2-gpio-bank { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + interrupt-parent = <&gic>; + interrupts = <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>; + }; + + gpm3: gpm3-gpio-bank { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + interrupt-parent = <&gic>; + interrupts = <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>; + }; + + gpm4: gpm4-gpio-bank { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + interrupt-parent = <&gic>; + interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>; + }; + + gpm5: gpm5-gpio-bank { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + interrupt-parent = <&gic>; + interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>; + }; + + gpm6: gpm6-gpio-bank { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + interrupt-parent = <&gic>; + interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>; + }; + + gpm7: gpm7-gpio-bank { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + interrupt-parent = <&gic>; + interrupts = <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>; + }; + + /* USI_CMGP0: HSI2C function */ + hsi2c3_pins: hsi2c3-pins { + samsung,pins = "gpm0-0", "gpm1-0"; + samsung,pin-function = <EXYNOS_PIN_FUNC_2>; + samsung,pin-pud = <EXYNOS_PIN_PULL_UP>; + samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>; + }; + + /* USI_CMGP0: UART function (4 pins, Auto Flow Control) */ + uart1_single_pins: uart1-single-pins { + samsung,pins = "gpm0-0", "gpm1-0", "gpm2-0", "gpm3-0"; + samsung,pin-function = <EXYNOS_PIN_FUNC_2>; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + }; + + /* USI_CMGP0: UART function (2 pins, Non-Auto Flow Control) */ + uart1_dual_pins: uart1-dual-pins { + samsung,pins = "gpm0-0", "gpm1-0"; + samsung,pin-function = <EXYNOS_PIN_FUNC_2>; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + }; + + /* USI_CMGP0: SPI function */ + spi1_pins: spi1-pins { + samsung,pins = "gpm0-0", "gpm1-0", "gpm2-0", "gpm3-0"; + samsung,pin-function = <EXYNOS_PIN_FUNC_2>; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>; + }; + + /* USI_CMGP1: HSI2C function */ + hsi2c4_pins: hsi2c4-pins { + samsung,pins = "gpm4-0", "gpm5-0"; + samsung,pin-function = <EXYNOS_PIN_FUNC_2>; + samsung,pin-pud = <EXYNOS_PIN_PULL_UP>; + samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>; + }; + + /* USI_CMGP1: UART function (4 pins, Auto Flow Control) */ + uart2_single_pins: uart2-single-pins { + samsung,pins = "gpm4-0", "gpm5-0", "gpm6-0", "gpm7-0"; + samsung,pin-function = <EXYNOS_PIN_FUNC_2>; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + }; + + /* USI_CMGP1: UART function (2 pins, Non-Auto Flow Control) */ + uart2_dual_pins: uart2-dual-pins { + samsung,pins = "gpm4-0", "gpm5-0"; + samsung,pin-function = <EXYNOS_PIN_FUNC_2>; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + }; + + /* USI_CMGP1: SPI function */ + spi2_pins: spi2-pins { + samsung,pins = "gpm4-0", "gpm5-0", "gpm6-0", "gpm7-0"; + samsung,pin-function = <EXYNOS_PIN_FUNC_2>; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>; + }; +}; + +&pinctrl_aud { + gpb0: gpb0-gpio-bank { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpb1: gpb1-gpio-bank { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + aud_codec_mclk_pins: aud-codec-mclk-pins { + samsung,pins = "gpb0-0"; + samsung,pin-function = <EXYNOS_PIN_FUNC_2>; + samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>; + }; + + aud_codec_mclk_idle_pins: aud-codec-mclk-idle-pins { + samsung,pins = "gpb0-0"; + samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>; + samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>; + }; + + aud_i2s0_pins: aud-i2s0-pins { + samsung,pins = "gpb0-1", "gpb0-2", "gpb0-3", "gpb0-4"; + samsung,pin-function = <EXYNOS_PIN_FUNC_2>; + samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>; + }; + + aud_i2s0_idle_pins: aud-i2s0-idle-pins { + samsung,pins = "gpb0-1", "gpb0-2", "gpb0-3", "gpb0-4"; + samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>; + samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>; + }; + + aud_i2s1_pins: aud-i2s1-pins { + samsung,pins = "gpb1-0", "gpb1-1", "gpb1-2", "gpb1-3"; + samsung,pin-function = <EXYNOS_PIN_FUNC_2>; + samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>; + }; + + aud_i2s1_idle_pins: aud-i2s1-idle-pins { + samsung,pins = "gpb1-0", "gpb1-1", "gpb1-2", "gpb1-3"; + samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>; + samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>; + }; + + aud_fm_pins: aud-fm-pins { + samsung,pins = "gpb1-4"; + samsung,pin-function = <EXYNOS_PIN_FUNC_2>; + samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>; + }; + + aud_fm_idle_pins: aud-fm-idle-pins { + samsung,pins = "gpb1-4"; + samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>; + samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>; + }; +}; + +&pinctrl_hsi { + gpf2: gpf2-gpio-bank { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + sd2_clk_pins: sd2-clk-pins { + samsung,pins = "gpf2-0"; + samsung,pin-function = <EXYNOS_PIN_FUNC_2>; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + samsung,pin-drv = <EXYNOS850_HSI_PIN_DRV_LV2>; + }; + + sd2_cmd_pins: sd2-cmd-pins { + samsung,pins = "gpf2-1"; + samsung,pin-function = <EXYNOS_PIN_FUNC_2>; + samsung,pin-pud = <EXYNOS_PIN_PULL_UP>; + samsung,pin-drv = <EXYNOS850_HSI_PIN_DRV_LV2>; + }; + + sd2_bus1_pins: sd2-bus1-pins { + samsung,pins = "gpf2-2"; + samsung,pin-function = <EXYNOS_PIN_FUNC_2>; + samsung,pin-pud = <EXYNOS_PIN_PULL_UP>; + samsung,pin-drv = <EXYNOS850_HSI_PIN_DRV_LV2>; + }; + + sd2_bus4_pins: sd2-bus4-pins { + samsung,pins = "gpf2-3", "gpf2-4", "gpf2-5"; + samsung,pin-function = <EXYNOS_PIN_FUNC_2>; + samsung,pin-pud = <EXYNOS_PIN_PULL_UP>; + samsung,pin-drv = <EXYNOS850_HSI_PIN_DRV_LV2>; + }; + + sd2_pdn_pins: sd2-pdn-pins { + samsung,pins = "gpf2-0", "gpf2-1", "gpf2-2", "gpf2-3", + "gpf2-4", "gpf2-5"; + samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>; + samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>; + }; +}; + +&pinctrl_core { + gpf0: gpf0-gpio-bank { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpf1: gpf1-gpio-bank { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + sd0_clk_pins: sd0-clk-pins { + samsung,pins = "gpf0-0"; + samsung,pin-function = <EXYNOS_PIN_FUNC_2>; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV4>; + }; + + sd0_cmd_pins: sd0-cmd-pins { + samsung,pins = "gpf0-1"; + samsung,pin-function = <EXYNOS_PIN_FUNC_2>; + samsung,pin-pud = <EXYNOS_PIN_PULL_UP>; + samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV4>; + }; + + sd0_rdqs_pins: sd0-rdqs-pins { + samsung,pins = "gpf0-2"; + samsung,pin-function = <EXYNOS_PIN_FUNC_2>; + samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>; + samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV4>; + }; + + sd0_nreset_pins: sd0-nreset-pins { + samsung,pins = "gpf0-3"; + samsung,pin-function = <EXYNOS_PIN_FUNC_2>; + samsung,pin-pud = <EXYNOS_PIN_PULL_UP>; + samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV4>; + }; + + sd0_bus1_pins: sd0-bus1-pins { + samsung,pins = "gpf1-0"; + samsung,pin-function = <EXYNOS_PIN_FUNC_2>; + samsung,pin-pud = <EXYNOS_PIN_PULL_UP>; + samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV4>; + }; + + sd0_bus4_pins: sd0-bus4-pins { + samsung,pins = "gpf1-1", "gpf1-2", "gpf1-3"; + samsung,pin-function = <EXYNOS_PIN_FUNC_2>; + samsung,pin-pud = <EXYNOS_PIN_PULL_UP>; + samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV4>; + }; + + sd0_bus8_pins: sd0-bus8-pins { + samsung,pins = "gpf1-4", "gpf1-5", "gpf1-6", "gpf1-7"; + samsung,pin-function = <EXYNOS_PIN_FUNC_2>; + samsung,pin-pud = <EXYNOS_PIN_PULL_UP>; + samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV4>; + }; +}; + +&pinctrl_peri { + gpc0: gpc0-gpio-bank { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpc1: gpc1-gpio-bank { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpg0: gpg0-gpio-bank { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpg1: gpg1-gpio-bank { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpg2: gpg2-gpio-bank { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpg3: gpg3-gpio-bank { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpp0: gpp0-gpio-bank { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + gpp1: gpp1-gpio-bank { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpp2: gpp2-gpio-bank { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + sensor_mclk0_in_pins: sensor-mclk0-in-pins { + samsung,pins = "gpc0-0"; + samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV3>; + }; + + sensor_mclk0_out_pins: sensor-mclk0-out-pins { + samsung,pins = "gpc0-0"; + samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>; + samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>; + samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV3>; + }; + + sensor_mclk0_fn_pins: sensor-mclk0-fn-pins { + samsung,pins = "gpc0-0"; + samsung,pin-function = <EXYNOS_PIN_FUNC_2>; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV3>; + }; + + sensor_mclk1_in_pins: sensor-mclk1-in-pins { + samsung,pins = "gpc0-1"; + samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV3>; + }; + + sensor_mclk1_out_pins: sensor-mclk1-out-pins { + samsung,pins = "gpc0-1"; + samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>; + samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>; + samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV3>; + }; + + sensor_mclk1_fn_pins: sensor-mclk1-fn-pins { + samsung,pins = "gpc0-1"; + samsung,pin-function = <EXYNOS_PIN_FUNC_2>; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV3>; + }; + + sensor_mclk2_in_pins: sensor-mclk2-in-pins { + samsung,pins = "gpc0-2"; + samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV3>; + }; + + sensor_mclk2_out_pins: sensor-mclk2-out-pins { + samsung,pins = "gpc0-2"; + samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>; + samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>; + samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV3>; + }; + + sensor_mclk2_fn_pins: sensor-mclk2-fn-pins { + samsung,pins = "gpc0-2"; + samsung,pin-function = <EXYNOS_PIN_FUNC_2>; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV3>; + }; + + /* USI: HSI2C0 */ + hsi2c0_pins: hsi2c0-pins { + samsung,pins = "gpc1-0", "gpc1-1"; + samsung,pin-function = <EXYNOS_PIN_FUNC_2>; + samsung,pin-pud = <EXYNOS_PIN_PULL_UP>; + samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>; + }; + + /* USI: HSI2C1 */ + hsi2c1_pins: hsi2c1-pins { + samsung,pins = "gpc1-2", "gpc1-3"; + samsung,pin-function = <EXYNOS_PIN_FUNC_2>; + samsung,pin-pud = <EXYNOS_PIN_PULL_UP>; + samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>; + }; + + /* USI: HSI2C2 */ + hsi2c2_pins: hsi2c2-pins { + samsung,pins = "gpc1-4", "gpc1-5"; + samsung,pin-function = <EXYNOS_PIN_FUNC_2>; + samsung,pin-pud = <EXYNOS_PIN_PULL_UP>; + samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>; + }; + + /* USI: SPI */ + spi0_pins: spi0-pins { + samsung,pins = "gpp2-0", "gpp2-1", "gpp2-2", "gpp2-3"; + samsung,pin-function = <EXYNOS_PIN_FUNC_2>; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>; + }; + + i2c0_pins: i2c0-pins { + samsung,pins = "gpp0-0", "gpp0-1"; + samsung,pin-function = <EXYNOS_PIN_FUNC_2>; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>; + }; + + i2c1_pins: i2c1-pins { + samsung,pins = "gpp0-2", "gpp0-3"; + samsung,pin-function = <EXYNOS_PIN_FUNC_2>; + samsung,pin-pud = <EXYNOS_PIN_PULL_UP>; + samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>; + }; + + i2c2_pins: i2c2-pins { + samsung,pins = "gpp0-4", "gpp0-5"; + samsung,pin-function = <EXYNOS_PIN_FUNC_2>; + samsung,pin-pud = <EXYNOS_PIN_PULL_UP>; + samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>; + }; + + i2c3_pins: i2c3-pins { + samsung,pins = "gpp1-0", "gpp1-1"; + samsung,pin-function = <EXYNOS_PIN_FUNC_2>; + samsung,pin-pud = <EXYNOS_PIN_PULL_UP>; + samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>; + }; + + i2c4_pins: i2c4-pins { + samsung,pins = "gpp1-2", "gpp1-3"; + samsung,pin-function = <EXYNOS_PIN_FUNC_2>; + samsung,pin-pud = <EXYNOS_PIN_PULL_UP>; + samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>; + }; + + xclkout_pins: xclkout-pins { + samsung,pins = "gpq0-2"; + samsung,pin-function = <EXYNOS_PIN_FUNC_2>; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + }; +}; diff --git a/arch/arm64/boot/dts/exynos/exynos850.dtsi b/arch/arm64/boot/dts/exynos/exynos850.dtsi new file mode 100644 index 000000000000..d1700e96fee2 --- /dev/null +++ b/arch/arm64/boot/dts/exynos/exynos850.dtsi @@ -0,0 +1,701 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Samsung Exynos850 SoC device tree source + * + * Copyright (C) 2018 Samsung Electronics Co., Ltd. + * Copyright (C) 2021 Linaro Ltd. + * + * Samsung Exynos850 SoC device nodes are listed in this file. + * Exynos850 based board files can include this file and provide + * values for board specific bindings. + */ + +#include <dt-bindings/clock/exynos850.h> +#include <dt-bindings/interrupt-controller/arm-gic.h> +#include <dt-bindings/soc/samsung,exynos-usi.h> + +/ { + /* Also known under engineering name Exynos3830 */ + compatible = "samsung,exynos850"; + #address-cells = <2>; + #size-cells = <1>; + + interrupt-parent = <&gic>; + + aliases { + pinctrl0 = &pinctrl_alive; + pinctrl1 = &pinctrl_cmgp; + pinctrl2 = &pinctrl_aud; + pinctrl3 = &pinctrl_hsi; + pinctrl4 = &pinctrl_core; + pinctrl5 = &pinctrl_peri; + mmc0 = &mmc_0; + serial0 = &serial_0; + serial1 = &serial_1; + serial2 = &serial_2; + i2c0 = &i2c_0; + i2c1 = &i2c_1; + i2c2 = &i2c_2; + i2c3 = &i2c_3; + i2c4 = &i2c_4; + i2c5 = &i2c_5; + i2c6 = &i2c_6; + i2c7 = &hsi2c_0; + i2c8 = &hsi2c_1; + i2c9 = &hsi2c_2; + i2c10 = &hsi2c_3; + i2c11 = &hsi2c_4; + }; + + arm-pmu { + compatible = "arm,cortex-a55-pmu"; + interrupts = <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>; + interrupt-affinity = <&cpu0>, <&cpu1>, <&cpu2>, <&cpu3>, + <&cpu4>, <&cpu5>, <&cpu6>, <&cpu7>; + }; + + /* Main system clock (XTCXO); external, must be 26 MHz */ + oscclk: clock-oscclk { + compatible = "fixed-clock"; + clock-output-names = "oscclk"; + #clock-cells = <0>; + }; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu-map { + cluster0 { + core0 { + cpu = <&cpu0>; + }; + core1 { + cpu = <&cpu1>; + }; + core2 { + cpu = <&cpu2>; + }; + core3 { + cpu = <&cpu3>; + }; + }; + + cluster1 { + core0 { + cpu = <&cpu4>; + }; + core1 { + cpu = <&cpu5>; + }; + core2 { + cpu = <&cpu6>; + }; + core3 { + cpu = <&cpu7>; + }; + }; + }; + + cpu0: cpu@0 { + device_type = "cpu"; + compatible = "arm,cortex-a55"; + reg = <0x0>; + enable-method = "psci"; + }; + cpu1: cpu@1 { + device_type = "cpu"; + compatible = "arm,cortex-a55"; + reg = <0x1>; + enable-method = "psci"; + }; + cpu2: cpu@2 { + device_type = "cpu"; + compatible = "arm,cortex-a55"; + reg = <0x2>; + enable-method = "psci"; + }; + cpu3: cpu@3 { + device_type = "cpu"; + compatible = "arm,cortex-a55"; + reg = <0x3>; + enable-method = "psci"; + }; + cpu4: cpu@100 { + device_type = "cpu"; + compatible = "arm,cortex-a55"; + reg = <0x100>; + enable-method = "psci"; + }; + cpu5: cpu@101 { + device_type = "cpu"; + compatible = "arm,cortex-a55"; + reg = <0x101>; + enable-method = "psci"; + }; + cpu6: cpu@102 { + device_type = "cpu"; + compatible = "arm,cortex-a55"; + reg = <0x102>; + enable-method = "psci"; + }; + cpu7: cpu@103 { + device_type = "cpu"; + compatible = "arm,cortex-a55"; + reg = <0x103>; + enable-method = "psci"; + }; + }; + + psci { + compatible = "arm,psci-1.0"; + method = "smc"; + }; + + timer { + compatible = "arm,armv8-timer"; + /* Hypervisor Virtual Timer interrupt is not wired to GIC */ + interrupts = + <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>; + }; + + soc: soc@0 { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x0 0x0 0x20000000>; + + chipid@10000000 { + compatible = "samsung,exynos850-chipid"; + reg = <0x10000000 0x100>; + }; + + timer@10040000 { + compatible = "samsung,exynos4210-mct"; + reg = <0x10040000 0x800>; + interrupts = <GIC_SPI 203 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 204 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 205 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 206 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 207 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 209 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 210 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 211 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 212 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 213 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 214 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&oscclk>, <&cmu_peri CLK_GOUT_MCT_PCLK>; + clock-names = "fin_pll", "mct"; + }; + + gic: interrupt-controller@12a01000 { + compatible = "arm,gic-400"; + #interrupt-cells = <3>; + #address-cells = <0>; + reg = <0x12a01000 0x1000>, + <0x12a02000 0x2000>, + <0x12a04000 0x2000>, + <0x12a06000 0x2000>; + interrupt-controller; + interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(8) | + IRQ_TYPE_LEVEL_HIGH)>; + }; + + pmu_system_controller: system-controller@11860000 { + compatible = "samsung,exynos850-pmu", "syscon"; + reg = <0x11860000 0x10000>; + clocks = <&cmu_apm CLK_GOUT_PMU_ALIVE_PCLK>; + + reboot: syscon-reboot { + compatible = "syscon-reboot"; + regmap = <&pmu_system_controller>; + offset = <0x3a00>; /* SYSTEM_CONFIGURATION */ + mask = <0x2>; /* SWRESET_SYSTEM */ + value = <0x2>; /* reset value */ + }; + }; + + watchdog_cl0: watchdog@10050000 { + compatible = "samsung,exynos850-wdt"; + reg = <0x10050000 0x100>; + interrupts = <GIC_SPI 228 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cmu_peri CLK_GOUT_WDT0_PCLK>, <&oscclk>; + clock-names = "watchdog", "watchdog_src"; + samsung,syscon-phandle = <&pmu_system_controller>; + samsung,cluster-index = <0>; + status = "disabled"; + }; + + watchdog_cl1: watchdog@10060000 { + compatible = "samsung,exynos850-wdt"; + reg = <0x10060000 0x100>; + interrupts = <GIC_SPI 229 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cmu_peri CLK_GOUT_WDT1_PCLK>, <&oscclk>; + clock-names = "watchdog", "watchdog_src"; + samsung,syscon-phandle = <&pmu_system_controller>; + samsung,cluster-index = <1>; + status = "disabled"; + }; + + cmu_peri: clock-controller@10030000 { + compatible = "samsung,exynos850-cmu-peri"; + reg = <0x10030000 0x8000>; + #clock-cells = <1>; + + clocks = <&oscclk>, <&cmu_top CLK_DOUT_PERI_BUS>, + <&cmu_top CLK_DOUT_PERI_UART>, + <&cmu_top CLK_DOUT_PERI_IP>; + clock-names = "oscclk", "dout_peri_bus", + "dout_peri_uart", "dout_peri_ip"; + }; + + cmu_apm: clock-controller@11800000 { + compatible = "samsung,exynos850-cmu-apm"; + reg = <0x11800000 0x8000>; + #clock-cells = <1>; + + clocks = <&oscclk>, <&cmu_top CLK_DOUT_CLKCMU_APM_BUS>; + clock-names = "oscclk", "dout_clkcmu_apm_bus"; + }; + + cmu_cmgp: clock-controller@11c00000 { + compatible = "samsung,exynos850-cmu-cmgp"; + reg = <0x11c00000 0x8000>; + #clock-cells = <1>; + + clocks = <&oscclk>, <&cmu_apm CLK_GOUT_CLKCMU_CMGP_BUS>; + clock-names = "oscclk", "gout_clkcmu_cmgp_bus"; + }; + + cmu_core: clock-controller@12000000 { + compatible = "samsung,exynos850-cmu-core"; + reg = <0x12000000 0x8000>; + #clock-cells = <1>; + + clocks = <&oscclk>, <&cmu_top CLK_DOUT_CORE_BUS>, + <&cmu_top CLK_DOUT_CORE_CCI>, + <&cmu_top CLK_DOUT_CORE_MMC_EMBD>, + <&cmu_top CLK_DOUT_CORE_SSS>; + clock-names = "oscclk", "dout_core_bus", + "dout_core_cci", "dout_core_mmc_embd", + "dout_core_sss"; + }; + + cmu_top: clock-controller@120e0000 { + compatible = "samsung,exynos850-cmu-top"; + reg = <0x120e0000 0x8000>; + #clock-cells = <1>; + + clocks = <&oscclk>; + clock-names = "oscclk"; + }; + + cmu_dpu: clock-controller@13000000 { + compatible = "samsung,exynos850-cmu-dpu"; + reg = <0x13000000 0x8000>; + #clock-cells = <1>; + + clocks = <&oscclk>, <&cmu_top CLK_DOUT_DPU>; + clock-names = "oscclk", "dout_dpu"; + }; + + cmu_hsi: clock-controller@13400000 { + compatible = "samsung,exynos850-cmu-hsi"; + reg = <0x13400000 0x8000>; + #clock-cells = <1>; + + clocks = <&oscclk>, + <&cmu_top CLK_DOUT_HSI_BUS>, + <&cmu_top CLK_DOUT_HSI_MMC_CARD>, + <&cmu_top CLK_DOUT_HSI_USB20DRD>; + clock-names = "oscclk", "dout_hsi_bus", + "dout_hsi_mmc_card", "dout_hsi_usb20drd"; + }; + + pinctrl_alive: pinctrl@11850000 { + compatible = "samsung,exynos850-pinctrl"; + reg = <0x11850000 0x1000>; + + wakeup-interrupt-controller { + compatible = "samsung,exynos850-wakeup-eint"; + }; + }; + + pinctrl_cmgp: pinctrl@11c30000 { + compatible = "samsung,exynos850-pinctrl"; + reg = <0x11c30000 0x1000>; + + wakeup-interrupt-controller { + compatible = "samsung,exynos850-wakeup-eint"; + }; + }; + + pinctrl_core: pinctrl@12070000 { + compatible = "samsung,exynos850-pinctrl"; + reg = <0x12070000 0x1000>; + interrupts = <GIC_SPI 451 IRQ_TYPE_LEVEL_HIGH>; + }; + + pinctrl_hsi: pinctrl@13430000 { + compatible = "samsung,exynos850-pinctrl"; + reg = <0x13430000 0x1000>; + interrupts = <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>; + }; + + pinctrl_peri: pinctrl@139b0000 { + compatible = "samsung,exynos850-pinctrl"; + reg = <0x139b0000 0x1000>; + interrupts = <GIC_SPI 192 IRQ_TYPE_LEVEL_HIGH>; + }; + + pinctrl_aud: pinctrl@14a60000 { + compatible = "samsung,exynos850-pinctrl"; + reg = <0x14a60000 0x1000>; + }; + + rtc: rtc@11a30000 { + compatible = "samsung,s3c6410-rtc"; + reg = <0x11a30000 0x100>; + interrupts = <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cmu_apm CLK_GOUT_RTC_PCLK>; + clock-names = "rtc"; + status = "disabled"; + }; + + mmc_0: mmc@12100000 { + compatible = "samsung,exynos7-dw-mshc-smu"; + reg = <0x12100000 0x2000>; + interrupts = <GIC_SPI 452 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&cmu_core CLK_GOUT_MMC_EMBD_ACLK>, + <&cmu_core CLK_GOUT_MMC_EMBD_SDCLKIN>; + clock-names = "biu", "ciu"; + fifo-depth = <0x40>; + status = "disabled"; + }; + + i2c_0: i2c@13830000 { + compatible = "samsung,s3c2440-i2c"; + reg = <0x13830000 0x100>; + interrupts = <GIC_SPI 196 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + pinctrl-names = "default"; + pinctrl-0 = <&i2c0_pins>; + clocks = <&cmu_peri CLK_GOUT_I2C0_PCLK>; + clock-names = "i2c"; + status = "disabled"; + }; + + i2c_1: i2c@13840000 { + compatible = "samsung,s3c2440-i2c"; + reg = <0x13840000 0x100>; + interrupts = <GIC_SPI 197 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + pinctrl-names = "default"; + pinctrl-0 = <&i2c1_pins>; + clocks = <&cmu_peri CLK_GOUT_I2C1_PCLK>; + clock-names = "i2c"; + status = "disabled"; + }; + + i2c_2: i2c@13850000 { + compatible = "samsung,s3c2440-i2c"; + reg = <0x13850000 0x100>; + interrupts = <GIC_SPI 198 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + pinctrl-names = "default"; + pinctrl-0 = <&i2c2_pins>; + clocks = <&cmu_peri CLK_GOUT_I2C2_PCLK>; + clock-names = "i2c"; + status = "disabled"; + }; + + i2c_3: i2c@13860000 { + compatible = "samsung,s3c2440-i2c"; + reg = <0x13860000 0x100>; + interrupts = <GIC_SPI 199 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + pinctrl-names = "default"; + pinctrl-0 = <&i2c3_pins>; + clocks = <&cmu_peri CLK_GOUT_I2C3_PCLK>; + clock-names = "i2c"; + status = "disabled"; + }; + + i2c_4: i2c@13870000 { + compatible = "samsung,s3c2440-i2c"; + reg = <0x13870000 0x100>; + interrupts = <GIC_SPI 200 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + pinctrl-names = "default"; + pinctrl-0 = <&i2c4_pins>; + clocks = <&cmu_peri CLK_GOUT_I2C4_PCLK>; + clock-names = "i2c"; + status = "disabled"; + }; + + /* I2C_5 (also called CAM_PMIC_I2C in TRM) */ + i2c_5: i2c@13880000 { + compatible = "samsung,s3c2440-i2c"; + reg = <0x13880000 0x100>; + interrupts = <GIC_SPI 201 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + pinctrl-names = "default"; + pinctrl-0 = <&i2c5_pins>; + clocks = <&cmu_peri CLK_GOUT_I2C5_PCLK>; + clock-names = "i2c"; + status = "disabled"; + }; + + /* I2C_6 (also called MOTOR_I2C in TRM) */ + i2c_6: i2c@13890000 { + compatible = "samsung,s3c2440-i2c"; + reg = <0x13890000 0x100>; + interrupts = <GIC_SPI 202 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + pinctrl-names = "default"; + pinctrl-0 = <&i2c6_pins>; + clocks = <&cmu_peri CLK_GOUT_I2C6_PCLK>; + clock-names = "i2c"; + status = "disabled"; + }; + + sysreg_peri: syscon@10020000 { + compatible = "samsung,exynos850-sysreg", "syscon"; + reg = <0x10020000 0x10000>; + clocks = <&cmu_peri CLK_GOUT_SYSREG_PERI_PCLK>; + }; + + sysreg_cmgp: syscon@11c20000 { + compatible = "samsung,exynos850-sysreg", "syscon"; + reg = <0x11c20000 0x10000>; + clocks = <&cmu_cmgp CLK_GOUT_SYSREG_CMGP_PCLK>; + }; + + usi_uart: usi@138200c0 { + compatible = "samsung,exynos850-usi"; + reg = <0x138200c0 0x20>; + samsung,sysreg = <&sysreg_peri 0x1010>; + samsung,mode = <USI_V2_UART>; + #address-cells = <1>; + #size-cells = <1>; + ranges; + clocks = <&cmu_peri CLK_GOUT_UART_PCLK>, + <&cmu_peri CLK_GOUT_UART_IPCLK>; + clock-names = "pclk", "ipclk"; + status = "disabled"; + + serial_0: serial@13820000 { + compatible = "samsung,exynos850-uart"; + reg = <0x13820000 0xc0>; + interrupts = <GIC_SPI 227 IRQ_TYPE_LEVEL_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&uart0_pins>; + clocks = <&cmu_peri CLK_GOUT_UART_PCLK>, + <&cmu_peri CLK_GOUT_UART_IPCLK>; + clock-names = "uart", "clk_uart_baud0"; + status = "disabled"; + }; + }; + + usi_hsi2c_0: usi@138a00c0 { + compatible = "samsung,exynos850-usi"; + reg = <0x138a00c0 0x20>; + samsung,sysreg = <&sysreg_peri 0x1020>; + samsung,mode = <USI_V2_I2C>; + #address-cells = <1>; + #size-cells = <1>; + ranges; + clocks = <&cmu_peri CLK_GOUT_HSI2C0_PCLK>, + <&cmu_peri CLK_GOUT_HSI2C0_IPCLK>; + clock-names = "pclk", "ipclk"; + status = "disabled"; + + hsi2c_0: i2c@138a0000 { + compatible = "samsung,exynosautov9-hsi2c"; + reg = <0x138a0000 0xc0>; + interrupts = <GIC_SPI 193 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + pinctrl-names = "default"; + pinctrl-0 = <&hsi2c0_pins>; + clocks = <&cmu_peri CLK_GOUT_HSI2C0_IPCLK>, + <&cmu_peri CLK_GOUT_HSI2C0_PCLK>; + clock-names = "hsi2c", "hsi2c_pclk"; + status = "disabled"; + }; + }; + + usi_hsi2c_1: usi@138b00c0 { + compatible = "samsung,exynos850-usi"; + reg = <0x138b00c0 0x20>; + samsung,sysreg = <&sysreg_peri 0x1030>; + samsung,mode = <USI_V2_I2C>; + #address-cells = <1>; + #size-cells = <1>; + ranges; + clocks = <&cmu_peri CLK_GOUT_HSI2C1_PCLK>, + <&cmu_peri CLK_GOUT_HSI2C1_IPCLK>; + clock-names = "pclk", "ipclk"; + status = "disabled"; + + hsi2c_1: i2c@138b0000 { + compatible = "samsung,exynosautov9-hsi2c"; + reg = <0x138b0000 0xc0>; + interrupts = <GIC_SPI 194 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + pinctrl-names = "default"; + pinctrl-0 = <&hsi2c1_pins>; + clocks = <&cmu_peri CLK_GOUT_HSI2C1_IPCLK>, + <&cmu_peri CLK_GOUT_HSI2C1_PCLK>; + clock-names = "hsi2c", "hsi2c_pclk"; + status = "disabled"; + }; + }; + + usi_hsi2c_2: usi@138c00c0 { + compatible = "samsung,exynos850-usi"; + reg = <0x138c00c0 0x20>; + samsung,sysreg = <&sysreg_peri 0x1040>; + samsung,mode = <USI_V2_I2C>; + #address-cells = <1>; + #size-cells = <1>; + ranges; + clocks = <&cmu_peri CLK_GOUT_HSI2C2_PCLK>, + <&cmu_peri CLK_GOUT_HSI2C2_IPCLK>; + clock-names = "pclk", "ipclk"; + status = "disabled"; + + hsi2c_2: i2c@138c0000 { + compatible = "samsung,exynosautov9-hsi2c"; + reg = <0x138c0000 0xc0>; + interrupts = <GIC_SPI 195 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + pinctrl-names = "default"; + pinctrl-0 = <&hsi2c2_pins>; + clocks = <&cmu_peri CLK_GOUT_HSI2C2_IPCLK>, + <&cmu_peri CLK_GOUT_HSI2C2_PCLK>; + clock-names = "hsi2c", "hsi2c_pclk"; + status = "disabled"; + }; + }; + + usi_spi_0: usi@139400c0 { + compatible = "samsung,exynos850-usi"; + reg = <0x139400c0 0x20>; + samsung,sysreg = <&sysreg_peri 0x1050>; + samsung,mode = <USI_V2_SPI>; + #address-cells = <1>; + #size-cells = <1>; + ranges; + clocks = <&cmu_peri CLK_GOUT_SPI0_PCLK>, + <&cmu_peri CLK_GOUT_SPI0_IPCLK>; + clock-names = "pclk", "ipclk"; + status = "disabled"; + }; + + usi_cmgp0: usi@11d000c0 { + compatible = "samsung,exynos850-usi"; + reg = <0x11d000c0 0x20>; + samsung,sysreg = <&sysreg_cmgp 0x2000>; + samsung,mode = <USI_V2_I2C>; + #address-cells = <1>; + #size-cells = <1>; + ranges; + clocks = <&cmu_cmgp CLK_GOUT_CMGP_USI0_PCLK>, + <&cmu_cmgp CLK_GOUT_CMGP_USI0_IPCLK>; + clock-names = "pclk", "ipclk"; + status = "disabled"; + + hsi2c_3: i2c@11d00000 { + compatible = "samsung,exynosautov9-hsi2c"; + reg = <0x11d00000 0xc0>; + interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + pinctrl-names = "default"; + pinctrl-0 = <&hsi2c3_pins>; + clocks = <&cmu_cmgp CLK_GOUT_CMGP_USI0_IPCLK>, + <&cmu_cmgp CLK_GOUT_CMGP_USI0_PCLK>; + clock-names = "hsi2c", "hsi2c_pclk"; + status = "disabled"; + }; + + serial_1: serial@11d00000 { + compatible = "samsung,exynos850-uart"; + reg = <0x11d00000 0xc0>; + interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&uart1_single_pins>; + clocks = <&cmu_cmgp CLK_GOUT_CMGP_USI0_PCLK>, + <&cmu_cmgp CLK_GOUT_CMGP_USI0_IPCLK>; + clock-names = "uart", "clk_uart_baud0"; + status = "disabled"; + }; + }; + + usi_cmgp1: usi@11d200c0 { + compatible = "samsung,exynos850-usi"; + reg = <0x11d200c0 0x20>; + samsung,sysreg = <&sysreg_cmgp 0x2010>; + samsung,mode = <USI_V2_I2C>; + #address-cells = <1>; + #size-cells = <1>; + ranges; + clocks = <&cmu_cmgp CLK_GOUT_CMGP_USI1_PCLK>, + <&cmu_cmgp CLK_GOUT_CMGP_USI1_IPCLK>; + clock-names = "pclk", "ipclk"; + status = "disabled"; + + hsi2c_4: i2c@11d20000 { + compatible = "samsung,exynosautov9-hsi2c"; + reg = <0x11d20000 0xc0>; + interrupts = <GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + pinctrl-names = "default"; + pinctrl-0 = <&hsi2c4_pins>; + clocks = <&cmu_cmgp CLK_GOUT_CMGP_USI1_IPCLK>, + <&cmu_cmgp CLK_GOUT_CMGP_USI1_PCLK>; + clock-names = "hsi2c", "hsi2c_pclk"; + status = "disabled"; + }; + + serial_2: serial@11d20000 { + compatible = "samsung,exynos850-uart"; + reg = <0x11d20000 0xc0>; + interrupts = <GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&uart2_single_pins>; + clocks = <&cmu_cmgp CLK_GOUT_CMGP_USI1_PCLK>, + <&cmu_cmgp CLK_GOUT_CMGP_USI1_IPCLK>; + clock-names = "uart", "clk_uart_baud0"; + status = "disabled"; + }; + }; + }; +}; + +#include "exynos850-pinctrl.dtsi" diff --git a/arch/arm64/boot/dts/exynos/exynosautov9-pinctrl.dtsi b/arch/arm64/boot/dts/exynos/exynosautov9-pinctrl.dtsi index 2407b03b5404..ef0349d1c3d0 100644 --- a/arch/arm64/boot/dts/exynos/exynosautov9-pinctrl.dtsi +++ b/arch/arm64/boot/dts/exynos/exynosautov9-pinctrl.dtsi @@ -11,7 +11,7 @@ #include <dt-bindings/pinctrl/samsung.h> &pinctrl_alive { - gpa0: gpa0 { + gpa0: gpa0-gpio-bank { gpio-controller; #gpio-cells = <2>; interrupt-controller; @@ -27,7 +27,7 @@ <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>; }; - gpa1: gpa1 { + gpa1: gpa1-gpio-bank { gpio-controller; #gpio-cells = <2>; interrupt-controller; @@ -47,7 +47,7 @@ samsung,pin-function = <EXYNOS_PIN_FUNC_2>; }; - gpq0: gpq0 { + gpq0: gpq0-gpio-bank { gpio-controller; #gpio-cells = <2>; @@ -69,7 +69,7 @@ }; &pinctrl_aud { - gpb0: gpb0 { + gpb0: gpb0-gpio-bank { gpio-controller; #gpio-cells = <2>; @@ -77,7 +77,7 @@ #interrupt-cells = <2>; }; - gpb1: gpb1 { + gpb1: gpb1-gpio-bank { gpio-controller; #gpio-cells = <2>; @@ -85,7 +85,7 @@ #interrupt-cells = <2>; }; - gpb2: gpb2 { + gpb2: gpb2-gpio-bank { gpio-controller; #gpio-cells = <2>; @@ -93,7 +93,7 @@ #interrupt-cells = <2>; }; - gpb3: gpb3 { + gpb3: gpb3-gpio-bank { gpio-controller; #gpio-cells = <2>; @@ -199,7 +199,7 @@ }; &pinctrl_fsys0 { - gpf0: gpf0 { + gpf0: gpf0-gpio-bank { gpio-controller; #gpio-cells = <2>; @@ -207,7 +207,7 @@ #interrupt-cells = <2>; }; - gpf1: gpf1 { + gpf1: gpf1-gpio-bank { gpio-controller; #gpio-cells = <2>; @@ -355,7 +355,7 @@ }; &pinctrl_fsys1 { - gpf8: gpf8 { + gpf8: gpf8-gpio-bank { gpio-controller; #gpio-cells = <2>; @@ -393,7 +393,7 @@ }; &pinctrl_fsys2 { - gpf2: gpf2 { + gpf2: gpf2-gpio-bank { gpio-controller; #gpio-cells = <2>; @@ -401,7 +401,7 @@ #interrupt-cells = <2>; }; - gpf3: gpf3 { + gpf3: gpf3-gpio-bank { gpio-controller; #gpio-cells = <2>; @@ -409,7 +409,7 @@ #interrupt-cells = <2>; }; - gpf4: gpf4 { + gpf4: gpf4-gpio-bank { gpio-controller; #gpio-cells = <2>; @@ -417,7 +417,7 @@ #interrupt-cells = <2>; }; - gpf5: gpf5 { + gpf5: gpf5-gpio-bank { gpio-controller; #gpio-cells = <2>; @@ -425,7 +425,7 @@ #interrupt-cells = <2>; }; - gpf6: gpf6 { + gpf6: gpf6-gpio-bank { gpio-controller; #gpio-cells = <2>; @@ -499,7 +499,7 @@ }; &pinctrl_peric0 { - gpp0: gpp0 { + gpp0: gpp0-gpio-bank { gpio-controller; #gpio-cells = <2>; @@ -507,7 +507,7 @@ #interrupt-cells = <2>; }; - gpp1: gpp1 { + gpp1: gpp1-gpio-bank { gpio-controller; #gpio-cells = <2>; @@ -515,7 +515,7 @@ #interrupt-cells = <2>; }; - gpp2: gpp2 { + gpp2: gpp2-gpio-bank { gpio-controller; #gpio-cells = <2>; @@ -523,7 +523,7 @@ #interrupt-cells = <2>; }; - gpg0: gpg0 { + gpg0: gpg0-gpio-bank { gpio-controller; #gpio-cells = <2>; @@ -833,7 +833,7 @@ }; &pinctrl_peric1 { - gpp3: gpp3 { + gpp3: gpp3-gpio-bank { gpio-controller; #gpio-cells = <2>; @@ -841,7 +841,7 @@ #interrupt-cells = <2>; }; - gpp4: gpp4 { + gpp4: gpp4-gpio-bank { gpio-controller; #gpio-cells = <2>; @@ -849,7 +849,7 @@ #interrupt-cells = <2>; }; - gpp5: gpp5 { + gpp5: gpp5-gpio-bank { gpio-controller; #gpio-cells = <2>; @@ -857,7 +857,7 @@ #interrupt-cells = <2>; }; - gpg1: gpg1 { + gpg1: gpg1-gpio-bank { gpio-controller; #gpio-cells = <2>; @@ -865,7 +865,7 @@ #interrupt-cells = <2>; }; - gpg2: gpg2 { + gpg2: gpg2-gpio-bank { gpio-controller; #gpio-cells = <2>; @@ -873,7 +873,7 @@ #interrupt-cells = <2>; }; - gpg3: gpg3 { + gpg3: gpg3-gpio-bank { gpio-controller; #gpio-cells = <2>; diff --git a/arch/arm64/boot/dts/exynos/exynosautov9.dtsi b/arch/arm64/boot/dts/exynos/exynosautov9.dtsi index de8fcb82eaec..807d500d6022 100644 --- a/arch/arm64/boot/dts/exynos/exynosautov9.dtsi +++ b/arch/arm64/boot/dts/exynos/exynosautov9.dtsi @@ -208,7 +208,7 @@ reg = <0x10450000 0x1000>; wakeup-interrupt-controller { - compatible = "samsung,exynos7-wakeup-eint"; + compatible = "samsung,exynosautov9-wakeup-eint"; }; }; diff --git a/arch/arm64/boot/dts/freescale/Makefile b/arch/arm64/boot/dts/freescale/Makefile index 6d8f0a532587..7f51b537df40 100644 --- a/arch/arm64/boot/dts/freescale/Makefile +++ b/arch/arm64/boot/dts/freescale/Makefile @@ -1,14 +1,5 @@ # SPDX-License-Identifier: GPL-2.0 -# required for overlay support -DTC_FLAGS_fsl-ls1028a-qds := -@ -DTC_FLAGS_fsl-ls1028a-qds-13bb := -@ -DTC_FLAGS_fsl-ls1028a-qds-65bb := -@ -DTC_FLAGS_fsl-ls1028a-qds-7777 := -@ -DTC_FLAGS_fsl-ls1028a-qds-85bb := -@ -DTC_FLAGS_fsl-ls1028a-qds-899b := -@ -DTC_FLAGS_fsl-ls1028a-qds-9999 := -@ - dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1012a-frdm.dtb dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1012a-frwy.dtb dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1012a-oxalis.dtb @@ -21,12 +12,6 @@ dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1028a-kontron-sl28-var2.dtb dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1028a-kontron-sl28-var3-ads2.dtb dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1028a-kontron-sl28-var4.dtb dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1028a-qds.dtb -dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1028a-qds-13bb.dtb -dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1028a-qds-65bb.dtb -dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1028a-qds-7777.dtb -dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1028a-qds-85bb.dtb -dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1028a-qds-899b.dtb -dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1028a-qds-9999.dtb dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1028a-rdb.dtb dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1043a-qds.dtb dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1043a-rdb.dtb @@ -49,9 +34,24 @@ dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-lx2160a-qds.dtb dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-lx2160a-rdb.dtb dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-lx2162a-qds.dtb +fsl-ls1028a-qds-13bb-dtbs := fsl-ls1028a-qds.dtb fsl-ls1028a-qds-13bb.dtbo +fsl-ls1028a-qds-65bb-dtbs := fsl-ls1028a-qds.dtb fsl-ls1028a-qds-65bb.dtbo +fsl-ls1028a-qds-7777-dtbs := fsl-ls1028a-qds.dtb fsl-ls1028a-qds-7777.dtbo +fsl-ls1028a-qds-85bb-dtbs := fsl-ls1028a-qds.dtb fsl-ls1028a-qds-85bb.dtbo +fsl-ls1028a-qds-899b-dtbs := fsl-ls1028a-qds.dtb fsl-ls1028a-qds-899b.dtbo +fsl-ls1028a-qds-9999-dtbs := fsl-ls1028a-qds.dtb fsl-ls1028a-qds-9999.dtbo + +dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1028a-qds-13bb.dtb +dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1028a-qds-65bb.dtb +dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1028a-qds-7777.dtb +dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1028a-qds-85bb.dtb +dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1028a-qds-899b.dtb +dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1028a-qds-9999.dtb + dtb-$(CONFIG_ARCH_MXC) += imx8mm-beacon-kit.dtb -dtb-$(CONFIG_ARCH_MXC) += imx8mm-evk.dtb dtb-$(CONFIG_ARCH_MXC) += imx8mm-ddr4-evk.dtb +dtb-$(CONFIG_ARCH_MXC) += imx8mm-emcon-avari.dtb +dtb-$(CONFIG_ARCH_MXC) += imx8mm-evk.dtb dtb-$(CONFIG_ARCH_MXC) += imx8mm-icore-mx8mm-ctouch2.dtb dtb-$(CONFIG_ARCH_MXC) += imx8mm-icore-mx8mm-edimm2.2.dtb dtb-$(CONFIG_ARCH_MXC) += imx8mm-kontron-n801x-s.dtb @@ -63,6 +63,11 @@ dtb-$(CONFIG_ARCH_MXC) += imx8mm-venice-gw72xx-0x.dtb dtb-$(CONFIG_ARCH_MXC) += imx8mm-venice-gw73xx-0x.dtb dtb-$(CONFIG_ARCH_MXC) += imx8mm-venice-gw7901.dtb dtb-$(CONFIG_ARCH_MXC) += imx8mm-venice-gw7902.dtb +dtb-$(CONFIG_ARCH_MXC) += imx8mm-venice-gw7903.dtb +dtb-$(CONFIG_ARCH_MXC) += imx8mm-verdin-nonwifi-dahlia.dtb +dtb-$(CONFIG_ARCH_MXC) += imx8mm-verdin-nonwifi-dev.dtb +dtb-$(CONFIG_ARCH_MXC) += imx8mm-verdin-wifi-dahlia.dtb +dtb-$(CONFIG_ARCH_MXC) += imx8mm-verdin-wifi-dev.dtb dtb-$(CONFIG_ARCH_MXC) += imx8mn-beacon-kit.dtb dtb-$(CONFIG_ARCH_MXC) += imx8mn-bsh-smm-s2.dtb dtb-$(CONFIG_ARCH_MXC) += imx8mn-bsh-smm-s2pro.dtb @@ -94,6 +99,24 @@ dtb-$(CONFIG_ARCH_MXC) += imx8qxp-colibri-eval-v3.dtb dtb-$(CONFIG_ARCH_MXC) += imx8qxp-mek.dtb dtb-$(CONFIG_ARCH_MXC) += imx8ulp-evk.dtb +imx8mm-venice-gw72xx-0x-imx219-dtbs := imx8mm-venice-gw73xx-0x.dtb imx8mm-venice-gw73xx-0x-imx219.dtbo +imx8mm-venice-gw72xx-0x-rs232-rts-dtbs := imx8mm-venice-gw72xx-0x.dtb imx8mm-venice-gw72xx-0x-rs232-rts.dtbo +imx8mm-venice-gw72xx-0x-rs422-dtbs := imx8mm-venice-gw72xx-0x.dtb imx8mm-venice-gw72xx-0x-rs422.dtbo +imx8mm-venice-gw72xx-0x-rs485-dtbs := imx8mm-venice-gw72xx-0x.dtb imx8mm-venice-gw72xx-0x-rs485.dtbo +imx8mm-venice-gw73xx-0x-imx219-dtbs := imx8mm-venice-gw73xx-0x.dtb imx8mm-venice-gw73xx-0x-imx219.dtbo +imx8mm-venice-gw73xx-0x-rs232-rts-dtbs := imx8mm-venice-gw73xx-0x.dtb imx8mm-venice-gw73xx-0x-rs232-rts.dtbo +imx8mm-venice-gw73xx-0x-rs422-dtbs := imx8mm-venice-gw73xx-0x.dtb imx8mm-venice-gw73xx-0x-rs422.dtbo +imx8mm-venice-gw73xx-0x-rs485-dtbs := imx8mm-venice-gw73xx-0x.dtb imx8mm-venice-gw73xx-0x-rs485.dtbo + +dtb-$(CONFIG_ARCH_MXC) += imx8mm-venice-gw72xx-0x-imx219.dtb +dtb-$(CONFIG_ARCH_MXC) += imx8mm-venice-gw72xx-0x-rs232-rts.dtb +dtb-$(CONFIG_ARCH_MXC) += imx8mm-venice-gw72xx-0x-rs422.dtb +dtb-$(CONFIG_ARCH_MXC) += imx8mm-venice-gw72xx-0x-rs485.dtb +dtb-$(CONFIG_ARCH_MXC) += imx8mm-venice-gw73xx-0x-imx219.dtb +dtb-$(CONFIG_ARCH_MXC) += imx8mm-venice-gw73xx-0x-rs232-rts.dtb +dtb-$(CONFIG_ARCH_MXC) += imx8mm-venice-gw73xx-0x-rs422.dtb +dtb-$(CONFIG_ARCH_MXC) += imx8mm-venice-gw73xx-0x-rs485.dtb + dtb-$(CONFIG_ARCH_S32) += s32g274a-evb.dtb dtb-$(CONFIG_ARCH_S32) += s32g274a-rdb2.dtb dtb-$(CONFIG_ARCH_S32) += s32v234-evb.dtb diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1028a-qds-13bb.dts b/arch/arm64/boot/dts/freescale/fsl-ls1028a-qds-13bb.dts index f748a2c12a70..f826392c23fa 100644 --- a/arch/arm64/boot/dts/freescale/fsl-ls1028a-qds-13bb.dts +++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a-qds-13bb.dts @@ -12,102 +12,80 @@ /dts-v1/; /plugin/; -/ { - fragment@0 { - target = <&mdio_slot1>; - - __overlay__ { - #address-cells = <1>; - #size-cells = <0>; - - slot1_sgmii: ethernet-phy@2 { - /* AQR112 */ - reg = <0x2>; - compatible = "ethernet-phy-ieee802.3-c45"; - }; - }; - }; - - fragment@1 { - target = <&enetc_port0>; - - __overlay__ { - phy-handle = <&slot1_sgmii>; - phy-mode = "usxgmii"; - managed = "in-band-status"; - status = "okay"; - }; +&mdio_slot1 { + #address-cells = <1>; + #size-cells = <0>; + + slot1_sgmii: ethernet-phy@2 { + /* AQR112 */ + reg = <0x2>; + compatible = "ethernet-phy-ieee802.3-c45"; }; +}; - fragment@2 { - target = <&mdio_slot2>; - - __overlay__ { - #address-cells = <1>; - #size-cells = <0>; - - /* 4 ports on AQR412 */ - slot2_qxgmii0: ethernet-phy@0 { - reg = <0x0>; - compatible = "ethernet-phy-ieee802.3-c45"; - }; - - slot2_qxgmii1: ethernet-phy@1 { - reg = <0x1>; - compatible = "ethernet-phy-ieee802.3-c45"; - }; +&enetc_port0 { + phy-handle = <&slot1_sgmii>; + phy-mode = "usxgmii"; + managed = "in-band-status"; + status = "okay"; +}; - slot2_qxgmii2: ethernet-phy@2 { - reg = <0x2>; - compatible = "ethernet-phy-ieee802.3-c45"; - }; +&mdio_slot2 { + #address-cells = <1>; + #size-cells = <0>; - slot2_qxgmii3: ethernet-phy@3 { - reg = <0x3>; - compatible = "ethernet-phy-ieee802.3-c45"; - }; - }; + /* 4 ports on AQR412 */ + slot2_qxgmii0: ethernet-phy@0 { + reg = <0x0>; + compatible = "ethernet-phy-ieee802.3-c45"; }; - fragment@3 { - target = <&mscc_felix_ports>; + slot2_qxgmii1: ethernet-phy@1 { + reg = <0x1>; + compatible = "ethernet-phy-ieee802.3-c45"; + }; - __overlay__ { - port@0 { - status = "okay"; - phy-handle = <&slot2_qxgmii0>; - phy-mode = "usxgmii"; - managed = "in-band-status"; - }; + slot2_qxgmii2: ethernet-phy@2 { + reg = <0x2>; + compatible = "ethernet-phy-ieee802.3-c45"; + }; - port@1 { - status = "okay"; - phy-handle = <&slot2_qxgmii1>; - phy-mode = "usxgmii"; - managed = "in-band-status"; - }; + slot2_qxgmii3: ethernet-phy@3 { + reg = <0x3>; + compatible = "ethernet-phy-ieee802.3-c45"; + }; +}; - port@2 { - status = "okay"; - phy-handle = <&slot2_qxgmii2>; - phy-mode = "usxgmii"; - managed = "in-band-status"; - }; +&mscc_felix_ports { + port@0 { + status = "okay"; + phy-handle = <&slot2_qxgmii0>; + phy-mode = "usxgmii"; + managed = "in-band-status"; + }; - port@3 { - status = "okay"; - phy-handle = <&slot2_qxgmii3>; - phy-mode = "usxgmii"; - managed = "in-band-status"; - }; - }; + port@1 { + status = "okay"; + phy-handle = <&slot2_qxgmii1>; + phy-mode = "usxgmii"; + managed = "in-band-status"; }; - fragment@4 { - target = <&mscc_felix>; + port@2 { + status = "okay"; + phy-handle = <&slot2_qxgmii2>; + phy-mode = "usxgmii"; + managed = "in-band-status"; + }; - __overlay__ { - status = "okay"; - }; + port@3 { + status = "okay"; + phy-handle = <&slot2_qxgmii3>; + phy-mode = "usxgmii"; + managed = "in-band-status"; }; }; + +&mscc_felix { + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1028a-qds-65bb.dts b/arch/arm64/boot/dts/freescale/fsl-ls1028a-qds-65bb.dts index 8ffb707a1576..40d34c8384a5 100644 --- a/arch/arm64/boot/dts/freescale/fsl-ls1028a-qds-65bb.dts +++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a-qds-65bb.dts @@ -11,98 +11,76 @@ /dts-v1/; /plugin/; -/ { - fragment@0 { - target = <&mdio_slot1>; - - __overlay__ { - #address-cells = <1>; - #size-cells = <0>; - - slot1_sgmii: ethernet-phy@2 { - /* AQR112 */ - reg = <0x2>; - compatible = "ethernet-phy-ieee802.3-c45"; - }; - }; - }; - - fragment@1 { - target = <&enetc_port0>; - - __overlay__ { - phy-handle = <&slot1_sgmii>; - phy-mode = "2500base-x"; - managed = "in-band-status"; - status = "okay"; - }; +&mdio_slot1 { + #address-cells = <1>; + #size-cells = <0>; + + slot1_sgmii: ethernet-phy@2 { + /* AQR112 */ + reg = <0x2>; + compatible = "ethernet-phy-ieee802.3-c45"; }; +}; - fragment@2 { - target = <&mdio_slot2>; - - __overlay__ { - #address-cells = <1>; - #size-cells = <0>; - - /* 4 ports on VSC8514 */ - slot2_qsgmii0: ethernet-phy@8 { - reg = <0x8>; - }; - - slot2_qsgmii1: ethernet-phy@9 { - reg = <0x9>; - }; +&enetc_port0 { + phy-handle = <&slot1_sgmii>; + phy-mode = "2500base-x"; + managed = "in-band-status"; + status = "okay"; +}; - slot2_qsgmii2: ethernet-phy@a { - reg = <0xa>; - }; +&mdio_slot2 { + #address-cells = <1>; + #size-cells = <0>; - slot2_qsgmii3: ethernet-phy@b { - reg = <0xb>; - }; - }; + /* 4 ports on VSC8514 */ + slot2_qsgmii0: ethernet-phy@8 { + reg = <0x8>; }; - fragment@3 { - target = <&mscc_felix_ports>; + slot2_qsgmii1: ethernet-phy@9 { + reg = <0x9>; + }; - __overlay__ { - port@0 { - status = "okay"; - phy-handle = <&slot2_qsgmii0>; - phy-mode = "qsgmii"; - managed = "in-band-status"; - }; + slot2_qsgmii2: ethernet-phy@a { + reg = <0xa>; + }; - port@1 { - status = "okay"; - phy-handle = <&slot2_qsgmii1>; - phy-mode = "qsgmii"; - managed = "in-band-status"; - }; + slot2_qsgmii3: ethernet-phy@b { + reg = <0xb>; + }; +}; - port@2 { - status = "okay"; - phy-handle = <&slot2_qsgmii2>; - phy-mode = "qsgmii"; - managed = "in-band-status"; - }; +&mscc_felix_ports { + port@0 { + status = "okay"; + phy-handle = <&slot2_qsgmii0>; + phy-mode = "qsgmii"; + managed = "in-band-status"; + }; - port@3 { - status = "okay"; - phy-handle = <&slot2_qsgmii3>; - phy-mode = "qsgmii"; - managed = "in-band-status"; - }; - }; + port@1 { + status = "okay"; + phy-handle = <&slot2_qsgmii1>; + phy-mode = "qsgmii"; + managed = "in-band-status"; }; - fragment@4 { - target = <&mscc_felix>; + port@2 { + status = "okay"; + phy-handle = <&slot2_qsgmii2>; + phy-mode = "qsgmii"; + managed = "in-band-status"; + }; - __overlay__ { - status = "okay"; - }; + port@3 { + status = "okay"; + phy-handle = <&slot2_qsgmii3>; + phy-mode = "qsgmii"; + managed = "in-band-status"; }; }; + +&mscc_felix { + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1028a-qds-7777.dts b/arch/arm64/boot/dts/freescale/fsl-ls1028a-qds-7777.dts index eb6a1e674f10..1dff68d7484b 100644 --- a/arch/arm64/boot/dts/freescale/fsl-ls1028a-qds-7777.dts +++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a-qds-7777.dts @@ -12,71 +12,58 @@ /dts-v1/; /plugin/; -/ { - fragment@0 { - target = <&mdio_slot1>; +&mdio_slot1 { + #address-cells = <1>; + #size-cells = <0>; - __overlay__ { - #address-cells = <1>; - #size-cells = <0>; - - /* 4 ports on AQR412 */ - slot1_sxgmii0: ethernet-phy@0 { - reg = <0x0>; - compatible = "ethernet-phy-ieee802.3-c45"; - }; - - slot1_sxgmii1: ethernet-phy@1 { - reg = <0x1>; - compatible = "ethernet-phy-ieee802.3-c45"; - }; - - slot1_sxgmii2: ethernet-phy@2 { - reg = <0x2>; - compatible = "ethernet-phy-ieee802.3-c45"; - }; + /* 4 ports on AQR412 */ + slot1_sxgmii0: ethernet-phy@0 { + reg = <0x0>; + compatible = "ethernet-phy-ieee802.3-c45"; + }; - slot1_sxgmii3: ethernet-phy@3 { - reg = <0x3>; - compatible = "ethernet-phy-ieee802.3-c45"; - }; - }; + slot1_sxgmii1: ethernet-phy@1 { + reg = <0x1>; + compatible = "ethernet-phy-ieee802.3-c45"; }; - fragment@1 { - target = <&mscc_felix_ports>; + slot1_sxgmii2: ethernet-phy@2 { + reg = <0x2>; + compatible = "ethernet-phy-ieee802.3-c45"; + }; - __overlay__ { - port@0 { - status = "okay"; - phy-handle = <&slot1_sxgmii0>; - phy-mode = "2500base-x"; - }; + slot1_sxgmii3: ethernet-phy@3 { + reg = <0x3>; + compatible = "ethernet-phy-ieee802.3-c45"; + }; +}; - port@1 { - status = "okay"; - phy-handle = <&slot1_sxgmii1>; - phy-mode = "2500base-x"; - }; +&mscc_felix_ports { + port@0 { + status = "okay"; + phy-handle = <&slot1_sxgmii0>; + phy-mode = "2500base-x"; + }; - port@2 { - status = "okay"; - phy-handle = <&slot1_sxgmii2>; - phy-mode = "2500base-x"; - }; + port@1 { + status = "okay"; + phy-handle = <&slot1_sxgmii1>; + phy-mode = "2500base-x"; + }; - port@3 { - status = "okay"; - phy-handle = <&slot1_sxgmii3>; - phy-mode = "2500base-x"; - }; - }; + port@2 { + status = "okay"; + phy-handle = <&slot1_sxgmii2>; + phy-mode = "2500base-x"; }; - fragment@2 { - target = <&mscc_felix>; - __overlay__ { - status = "okay"; - }; + port@3 { + status = "okay"; + phy-handle = <&slot1_sxgmii3>; + phy-mode = "2500base-x"; }; }; + +&mscc_felix { + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1028a-qds-85bb.dts b/arch/arm64/boot/dts/freescale/fsl-ls1028a-qds-85bb.dts index 8e90c3088ba1..19424d349713 100644 --- a/arch/arm64/boot/dts/freescale/fsl-ls1028a-qds-85bb.dts +++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a-qds-85bb.dts @@ -11,97 +11,75 @@ /dts-v1/; /plugin/; -/ { - fragment@0 { - target = <&mdio_slot1>; +&mdio_slot1 { + #address-cells = <1>; + #size-cells = <0>; - __overlay__ { - #address-cells = <1>; - #size-cells = <0>; - - slot1_sgmii: ethernet-phy@1c { - /* 1st port on VSC8234 */ - reg = <0x1c>; - }; - }; + slot1_sgmii: ethernet-phy@1c { + /* 1st port on VSC8234 */ + reg = <0x1c>; }; +}; - fragment@1 { - target = <&enetc_port0>; - - __overlay__ { - phy-handle = <&slot1_sgmii>; - phy-mode = "sgmii"; - managed = "in-band-status"; - status = "okay"; - }; - }; - - fragment@2 { - target = <&mdio_slot2>; - - __overlay__ { - #address-cells = <1>; - #size-cells = <0>; - - /* 4 ports on VSC8514 */ - slot2_qsgmii0: ethernet-phy@8 { - reg = <0x8>; - }; - - slot2_qsgmii1: ethernet-phy@9 { - reg = <0x9>; - }; +&enetc_port0 { + phy-handle = <&slot1_sgmii>; + phy-mode = "sgmii"; + managed = "in-band-status"; + status = "okay"; +}; - slot2_qsgmii2: ethernet-phy@a { - reg = <0xa>; - }; +&mdio_slot2 { + #address-cells = <1>; + #size-cells = <0>; - slot2_qsgmii3: ethernet-phy@b { - reg = <0xb>; - }; - }; + /* 4 ports on VSC8514 */ + slot2_qsgmii0: ethernet-phy@8 { + reg = <0x8>; }; - fragment@3 { - target = <&mscc_felix_ports>; + slot2_qsgmii1: ethernet-phy@9 { + reg = <0x9>; + }; - __overlay__ { - port@0 { - status = "okay"; - phy-handle = <&slot2_qsgmii0>; - phy-mode = "qsgmii"; - managed = "in-band-status"; - }; + slot2_qsgmii2: ethernet-phy@a { + reg = <0xa>; + }; - port@1 { - status = "okay"; - phy-handle = <&slot2_qsgmii1>; - phy-mode = "qsgmii"; - managed = "in-band-status"; - }; + slot2_qsgmii3: ethernet-phy@b { + reg = <0xb>; + }; +}; - port@2 { - status = "okay"; - phy-handle = <&slot2_qsgmii2>; - phy-mode = "qsgmii"; - managed = "in-band-status"; - }; +&mscc_felix_ports { + port@0 { + status = "okay"; + phy-handle = <&slot2_qsgmii0>; + phy-mode = "qsgmii"; + managed = "in-band-status"; + }; - port@3 { - status = "okay"; - phy-handle = <&slot2_qsgmii3>; - phy-mode = "qsgmii"; - managed = "in-band-status"; - }; - }; + port@1 { + status = "okay"; + phy-handle = <&slot2_qsgmii1>; + phy-mode = "qsgmii"; + managed = "in-band-status"; }; - fragment@4 { - target = <&mscc_felix>; + port@2 { + status = "okay"; + phy-handle = <&slot2_qsgmii2>; + phy-mode = "qsgmii"; + managed = "in-band-status"; + }; - __overlay__ { - status = "okay"; - }; + port@3 { + status = "okay"; + phy-handle = <&slot2_qsgmii3>; + phy-mode = "qsgmii"; + managed = "in-band-status"; }; }; + +&mscc_felix { + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1028a-qds-899b.dts b/arch/arm64/boot/dts/freescale/fsl-ls1028a-qds-899b.dts index 5d0a094e6c44..fb85847f778f 100644 --- a/arch/arm64/boot/dts/freescale/fsl-ls1028a-qds-899b.dts +++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a-qds-899b.dts @@ -11,65 +11,51 @@ /dts-v1/; /plugin/; -/ { - fragment@0 { - target = <&mdio_slot1>; - __overlay__ { - #address-cells = <1>; - #size-cells = <0>; +&mdio_slot1 { + #address-cells = <1>; + #size-cells = <0>; - /* VSC8234 */ - slot1_sgmii0: ethernet-phy@1c { - reg = <0x1c>; - }; - - slot1_sgmii1: ethernet-phy@1d { - reg = <0x1d>; - }; + /* VSC8234 */ + slot1_sgmii0: ethernet-phy@1c { + reg = <0x1c>; + }; - slot1_sgmii2: ethernet-phy@1e { - reg = <0x1e>; - }; + slot1_sgmii1: ethernet-phy@1d { + reg = <0x1d>; + }; - slot1_sgmii3: ethernet-phy@1f { - reg = <0x1f>; - }; - }; + slot1_sgmii2: ethernet-phy@1e { + reg = <0x1e>; }; - fragment@1 { - target = <&enetc_port0>; - __overlay__ { - phy-handle = <&slot1_sgmii0>; - phy-mode = "sgmii"; - managed = "in-band-status"; - status = "okay"; - }; + slot1_sgmii3: ethernet-phy@1f { + reg = <0x1f>; }; +}; - fragment@2 { - target = <&mscc_felix_ports>; - __overlay__ { - port@1 { - status = "okay"; - phy-handle = <&slot1_sgmii1>; - phy-mode = "sgmii"; - managed = "in-band-status"; - }; +&enetc_port0 { + phy-handle = <&slot1_sgmii0>; + phy-mode = "sgmii"; + managed = "in-band-status"; + status = "okay"; +}; - port@2 { - status = "okay"; - phy-handle = <&slot1_sgmii2>; - phy-mode = "sgmii"; - managed = "in-band-status"; - }; - }; +&mscc_felix_ports { + port@1 { + status = "okay"; + phy-handle = <&slot1_sgmii1>; + phy-mode = "sgmii"; + managed = "in-band-status"; }; - fragment@3 { - target = <&mscc_felix>; - __overlay__ { - status = "okay"; - }; + port@2 { + status = "okay"; + phy-handle = <&slot1_sgmii2>; + phy-mode = "sgmii"; + managed = "in-band-status"; }; }; + +&mscc_felix { + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1028a-qds-9999.dts b/arch/arm64/boot/dts/freescale/fsl-ls1028a-qds-9999.dts index 1ef743c48e84..63e46fad22bd 100644 --- a/arch/arm64/boot/dts/freescale/fsl-ls1028a-qds-9999.dts +++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a-qds-9999.dts @@ -11,69 +11,58 @@ /dts-v1/; /plugin/; -/ { - fragment@0 { - target = <&mdio_slot1>; - __overlay__ { - #address-cells = <1>; - #size-cells = <0>; +&mdio_slot1 { + #address-cells = <1>; + #size-cells = <0>; - /* VSC8234 */ - slot1_sgmii0: ethernet-phy@1c { - reg = <0x1c>; - }; - - slot1_sgmii1: ethernet-phy@1d { - reg = <0x1d>; - }; + /* VSC8234 */ + slot1_sgmii0: ethernet-phy@1c { + reg = <0x1c>; + }; - slot1_sgmii2: ethernet-phy@1e { - reg = <0x1e>; - }; + slot1_sgmii1: ethernet-phy@1d { + reg = <0x1d>; + }; - slot1_sgmii3: ethernet-phy@1f { - reg = <0x1f>; - }; - }; + slot1_sgmii2: ethernet-phy@1e { + reg = <0x1e>; }; - fragment@1 { - target = <&mscc_felix_ports>; - __overlay__ { - port@0 { - status = "okay"; - phy-handle = <&slot1_sgmii0>; - phy-mode = "sgmii"; - managed = "in-band-status"; - }; + slot1_sgmii3: ethernet-phy@1f { + reg = <0x1f>; + }; +}; - port@1 { - status = "okay"; - phy-handle = <&slot1_sgmii1>; - phy-mode = "sgmii"; - managed = "in-band-status"; - }; +&mscc_felix_ports { + port@0 { + status = "okay"; + phy-handle = <&slot1_sgmii0>; + phy-mode = "sgmii"; + managed = "in-band-status"; + }; - port@2 { - status = "okay"; - phy-handle = <&slot1_sgmii2>; - phy-mode = "sgmii"; - managed = "in-band-status"; - }; + port@1 { + status = "okay"; + phy-handle = <&slot1_sgmii1>; + phy-mode = "sgmii"; + managed = "in-band-status"; + }; - port@3 { - status = "okay"; - phy-handle = <&slot1_sgmii3>; - phy-mode = "sgmii"; - managed = "in-band-status"; - }; - }; + port@2 { + status = "okay"; + phy-handle = <&slot1_sgmii2>; + phy-mode = "sgmii"; + managed = "in-band-status"; }; - fragment@2 { - target = <&mscc_felix>; - __overlay__ { - status = "okay"; - }; + port@3 { + status = "okay"; + phy-handle = <&slot1_sgmii3>; + phy-mode = "sgmii"; + managed = "in-band-status"; }; }; + +&mscc_felix { + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1028a-qds.dts b/arch/arm64/boot/dts/freescale/fsl-ls1028a-qds.dts index 177bc1405f0f..19d3952dbffe 100644 --- a/arch/arm64/boot/dts/freescale/fsl-ls1028a-qds.dts +++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a-qds.dts @@ -107,6 +107,30 @@ reg = <5>; }; }; + + mdio_slot1: mdio@4 { + #address-cells = <1>; + #size-cells = <0>; + reg = <4>; + }; + + mdio_slot2: mdio@5 { + #address-cells = <1>; + #size-cells = <0>; + reg = <5>; + }; + + mdio_slot3: mdio@6 { + #address-cells = <1>; + #size-cells = <0>; + reg = <6>; + }; + + mdio_slot4: mdio@7 { + #address-cells = <1>; + #size-cells = <0>; + reg = <7>; + }; }; }; diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi index 5bb8c26e0825..088271d49139 100644 --- a/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi +++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi @@ -224,6 +224,17 @@ little-endian; }; + efuse@1e80000 { + compatible = "fsl,ls1028a-sfp"; + reg = <0x0 0x1e80000 0x0 0x10000>; + #address-cells = <1>; + #size-cells = <1>; + + ls1028a_uid: unique-id@1c { + reg = <0x1c 0x8>; + }; + }; + scfg: syscon@1fc0000 { compatible = "fsl,ls1028a-scfg", "syscon"; reg = <0x0 0x1fc0000 0x0 0x10000>; diff --git a/arch/arm64/boot/dts/freescale/imx8-ss-lsio.dtsi b/arch/arm64/boot/dts/freescale/imx8-ss-lsio.dtsi index ee4e585a9c39..6446e6df7a9a 100644 --- a/arch/arm64/boot/dts/freescale/imx8-ss-lsio.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8-ss-lsio.dtsi @@ -141,6 +141,22 @@ lsio_subsys: bus@5d000000 { status = "disabled"; }; + lsio_mu5: mailbox@5d200000 { + reg = <0x5d200000 0x10000>; + interrupts = <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>; + #mbox-cells = <2>; + power-domains = <&pd IMX_SC_R_MU_5A>; + status = "disabled"; + }; + + lsio_mu6: mailbox@5d210000 { + reg = <0x5d210000 0x10000>; + interrupts = <GIC_SPI 185 IRQ_TYPE_LEVEL_HIGH>; + #mbox-cells = <2>; + power-domains = <&pd IMX_SC_R_MU_6A>; + status = "disabled"; + }; + lsio_mu13: mailbox@5d280000 { reg = <0x5d280000 0x10000>; interrupts = <GIC_SPI 192 IRQ_TYPE_LEVEL_HIGH>; diff --git a/arch/arm64/boot/dts/freescale/imx8mm-beacon-baseboard.dtsi b/arch/arm64/boot/dts/freescale/imx8mm-beacon-baseboard.dtsi index 0da311898e01..ec3f2c177035 100644 --- a/arch/arm64/boot/dts/freescale/imx8mm-beacon-baseboard.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8mm-beacon-baseboard.dtsi @@ -3,6 +3,8 @@ * Copyright 2020 Compass Electronics Group, LLC */ +#include <dt-bindings/phy/phy-imx8-pcie.h> + / { leds { compatible = "gpio-leds"; @@ -34,6 +36,19 @@ }; }; + pcie0_refclk: pcie0-refclk { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <100000000>; + }; + + pcie0_refclk_gated: pcie0-refclk-gated { + compatible = "gpio-gate-clock"; + clocks = <&pcie0_refclk>; + #clock-cells = <0>; + enable-gpios = <&pca6416_1 2 GPIO_ACTIVE_LOW>; + }; + reg_audio: regulator-audio { compatible = "regulator-fixed"; regulator-name = "3v3_aud"; @@ -64,6 +79,16 @@ startup-delay-us = <100000>; }; + reg_pcie0: regulator-pcie { + compatible = "regulator-fixed"; + regulator-name = "pci_pwr_en"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + enable-active-high; + gpio = <&pca6416_1 1 GPIO_ACTIVE_HIGH>; + startup-delay-us = <100000>; + }; + reg_usdhc2_vmmc: regulator-usdhc2 { compatible = "regulator-fixed"; regulator-name = "VSD_3V3"; @@ -202,6 +227,32 @@ }; }; +&pcie_phy { + fsl,refclk-pad-mode = <IMX8_PCIE_REFCLK_PAD_INPUT>; + fsl,tx-deemph-gen1 = <0x2d>; + fsl,tx-deemph-gen2 = <0xf>; + fsl,clkreq-unsupported; + clocks = <&pcie0_refclk_gated>; + clock-names = "ref"; + status = "okay"; +}; + +&pcie0 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pcie0>; + reset-gpio = <&gpio4 21 GPIO_ACTIVE_LOW>; + clocks = <&clk IMX8MM_CLK_PCIE1_ROOT>, <&clk IMX8MM_CLK_PCIE1_AUX>, + <&pcie0_refclk_gated>; + clock-names = "pcie", "pcie_aux", "pcie_bus"; + assigned-clocks = <&clk IMX8MM_CLK_PCIE1_AUX>, + <&clk IMX8MM_CLK_PCIE1_CTRL>; + assigned-clock-rates = <10000000>, <250000000>; + assigned-clock-parents = <&clk IMX8MM_SYS_PLL2_50M>, + <&clk IMX8MM_SYS_PLL2_250M>; + vpcie-supply = <®_pcie0>; + status = "okay"; +}; + &sai3 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_sai3>; @@ -308,6 +359,12 @@ >; }; + pinctrl_pcie0: pcie0grp { + fsl,pins = < + MX8MM_IOMUXC_SAI2_RXFS_GPIO4_IO21 0x41 + >; + }; + pinctrl_sai3: sai3grp { fsl,pins = < MX8MM_IOMUXC_SAI3_TXFS_SAI3_TX_SYNC 0xd6 diff --git a/arch/arm64/boot/dts/freescale/imx8mm-emcon-avari.dts b/arch/arm64/boot/dts/freescale/imx8mm-emcon-avari.dts new file mode 100644 index 000000000000..b2e8967e9687 --- /dev/null +++ b/arch/arm64/boot/dts/freescale/imx8mm-emcon-avari.dts @@ -0,0 +1,23 @@ +// SPDX-License-Identifier: (GPL-2.0 or MIT) +// +// Copyright (c) 2021 emtrion GmbH +// Author: Frank Erdrich <frank.erdrich@emtrion.com> +// + +/dts-v1/; + +#include "imx8mm-emcon.dtsi" +#include "imx8mm-emcon-avari.dtsi" + +/ { + model = "emtrion SoM emCON-MX8M mini on Avari"; + compatible = "emtrion,emcon-mx8mm-avari", "fsl,imx8mm"; +}; + +&lvds_backlight { + status = "okay"; +}; + +&pwm1 { + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/freescale/imx8mm-emcon-avari.dtsi b/arch/arm64/boot/dts/freescale/imx8mm-emcon-avari.dtsi new file mode 100644 index 000000000000..5028f232b6bd --- /dev/null +++ b/arch/arm64/boot/dts/freescale/imx8mm-emcon-avari.dtsi @@ -0,0 +1,139 @@ +// SPDX-License-Identifier: (GPL-2.0 or MIT) +// +// Copyright (C) 2021 emtrion GmbH +// Author: Frank Erdrich <frank.erdrich@emtrion.com> +// + +/ { + aliases { + boardid = &boardID; + mmc0 = &usdhc1; + mmc1 = &usdhc2; + }; + + chosen { + stdout-path = &uart1; + }; + + reg_wall_5p0: regulator-wall5p0 { + compatible = "regulator-fixed"; + regulator-name = "Main-Supply"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-always-on; + regulator-boot-on; + }; + + reg_base3p3: regulator-base3p3 { + compatible = "regulator-fixed"; + vin-supply = <®_wall_5p0>; + regulator-name = "3V3-avari"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + regulator-boot-on; + }; + + reg_base1p5: regulator-base1p5 { + compatible = "regulator-fixed"; + vin-supply = <®_base3p3>; + regulator-name = "1V5-avari"; + regulator-min-microvolt = <1500000>; + regulator-max-microvolt = <1500000>; + regulator-always-on; + regulator-boot-on; + }; + + reg_usb_otg: regulator-otgvbus { + compatible = "regulator-fixed"; + vin-supply = <®_wall_5p0>; + regulator-name = "OTG_VBUS"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + gpio = <&gpio1 8 GPIO_ACTIVE_LOW>; + regulator-always-on; + }; + + clk_codec: clock-codec { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <12000000>; + }; + + sound { + compatible = "simple-audio-card"; + simple-audio-card,name = "SGTL5000-Card"; + simple-audio-card,format = "i2s"; + simple-audio-card,bitclock-master = <&codec_dai>; + simple-audio-card,frame-master = <&codec_dai>; + simple-audio-card,widgets = "Headphone", "Headphone Jack"; + simple-audio-card,routing = "Headphone Jack", "HP_OUT"; + + cpu_dai: simple-audio-card,cpu { + sound-dai = <&sai2>; + }; + + codec_dai: simple-audio-card,codec { + sound-dai = <&sgtl5000>; + }; + }; +}; + +&ecspi1 { + status = "okay"; +}; + +&i2c2 { + status = "okay"; +}; + +&i2c1 { + clock-frequency = <100000>; + status = "okay"; + + sgtl5000: audio-codec@a { + compatible = "fsl,sgtl5000"; + reg = <0x0a>; + #sound-dai-cells = <0>; + clocks = <&clk_codec>; + VDDA-supply = <®_base3p3>; + VDDIO-supply = <®_base3p3>; + }; + + boardID: gpio@3a { + compatible = "nxp,pca8574"; + reg = <0x3a>; + gpio-controller; + #gpio-cells = <1>; + }; +}; + +&sai2 { + status = "okay"; +}; + +&uart2 { + uart-has-rtscts; + status = "okay"; +}; + +&uart3 { + status = "okay"; +}; + +&uart4 { + status = "okay"; +}; + +&usbotg1 { + status = "okay"; +}; + +&usbotg2 { + dr_mode = "host"; + status = "disabled"; +}; + +&usdhc2 { + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/freescale/imx8mm-emcon.dtsi b/arch/arm64/boot/dts/freescale/imx8mm-emcon.dtsi new file mode 100644 index 000000000000..7c4af71baab9 --- /dev/null +++ b/arch/arm64/boot/dts/freescale/imx8mm-emcon.dtsi @@ -0,0 +1,627 @@ +// SPDX-License-Identifier: (GPL-2.0 or MIT) +// +// Copyright 2018 NXP +// Copyright (C) 2021 emtrion GmbH +// + +/dts-v1/; + +#include "imx8mm.dtsi" + +/ { + chosen { + stdout-path = &uart1; + }; + + som_leds: leds { + compatible = "gpio-leds"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_gpio_led>; + + green { + label = "som:green"; + gpios = <&gpio3 4 GPIO_ACTIVE_HIGH>; + default-state = "on"; + linux,default-trigger = "heartbeat"; + }; + + red { + label = "som:red"; + gpios = <&gpio5 10 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + }; + + lvds_backlight: lvds-backlight { + compatible = "pwm-backlight"; + enable-gpios = <&gpio3 23 GPIO_ACTIVE_HIGH>; + pwms = <&pwm1 0 50000 0>; + brightness-levels = < + 0 4 8 16 32 64 80 96 112 + 128 144 160 176 250 + >; + default-brightness-level = <9>; + status = "disabled"; + }; + + reg_usdhc1_vmmc: regulator-emmc { + compatible = "regulator-fixed"; + regulator-name = "eMMC"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + + reg_usdhc2_vmmc: regulator-usdhc2 { + compatible = "regulator-fixed"; + regulator-name = "sdcard_3V3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; +}; + +&A53_0 { + cpu-supply = <&buck2_reg>; +}; + +&ecspi1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ecspi1 &pinctrl_ecspi1_cs>; + cs-gpios = <&gpio5 9 GPIO_ACTIVE_LOW>, + <&gpio5 13 GPIO_ACTIVE_LOW>; + status = "okay"; +}; + +&fec1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_fec1>; + phy-mode = "rgmii-id"; + phy-handle = <ðphy0>; + fsl,magic-packet; + status = "okay"; + + mdio { + #address-cells = <1>; + #size-cells = <0>; + + ethphy0: ethernet-phy@0 { + compatible = "ethernet-phy-ieee802.3-c22"; + reg = <0>; + reset-gpios = <&gpio1 9 GPIO_ACTIVE_LOW>; + reset-assert-us = <10000>; + }; + }; +}; + +&flexspi { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_flexspi0>; + pinctrl-1 = <&pinctrl_flexspi1>; + status = "okay"; + + flash0: spi-flash@0 { + reg = <0>; + #address-cells = <1>; + #size-cells = <1>; + compatible = "jedec,spi-nor"; + spi-max-frequency = <40000000>; + }; +}; + +&iomuxc { + pinctrl-names = "default"; + + pinctrl_csi_pwn: csi-pwn-grp { + fsl,pins = < + MX8MM_IOMUXC_GPIO1_IO07_GPIO1_IO7 0x19 + >; + }; + + pinctrl_ecspi1: ecspi1-grp { + fsl,pins = < + MX8MM_IOMUXC_ECSPI1_SCLK_ECSPI1_SCLK 0x82 + MX8MM_IOMUXC_ECSPI1_MOSI_ECSPI1_MOSI 0x82 + MX8MM_IOMUXC_ECSPI1_MISO_ECSPI1_MISO 0x82 + >; + }; + + pinctrl_ecspi1_cs: ecspi1-cs { + fsl,pins = < + MX8MM_IOMUXC_ECSPI1_SS0_GPIO5_IO9 0x40000 + MX8MM_IOMUXC_ECSPI2_SS0_GPIO5_IO13 0x40000 + >; + }; + + pinctrl_fec1: fec1-grp { + fsl,pins = < + MX8MM_IOMUXC_ENET_MDC_ENET1_MDC 0x3 + MX8MM_IOMUXC_ENET_MDIO_ENET1_MDIO 0x3 + MX8MM_IOMUXC_ENET_TD3_ENET1_RGMII_TD3 0x1f + MX8MM_IOMUXC_ENET_TD2_ENET1_RGMII_TD2 0x1f + MX8MM_IOMUXC_ENET_TD1_ENET1_RGMII_TD1 0x1f + MX8MM_IOMUXC_ENET_TD0_ENET1_RGMII_TD0 0x1f + MX8MM_IOMUXC_ENET_RD3_ENET1_RGMII_RD3 0x91 + MX8MM_IOMUXC_ENET_RD2_ENET1_RGMII_RD2 0x91 + MX8MM_IOMUXC_ENET_RD1_ENET1_RGMII_RD1 0x91 + MX8MM_IOMUXC_ENET_RD0_ENET1_RGMII_RD0 0x91 + MX8MM_IOMUXC_ENET_TXC_ENET1_RGMII_TXC 0x1f + MX8MM_IOMUXC_ENET_RXC_ENET1_RGMII_RXC 0x91 + MX8MM_IOMUXC_ENET_RX_CTL_ENET1_RGMII_RX_CTL 0x91 + MX8MM_IOMUXC_ENET_TX_CTL_ENET1_RGMII_TX_CTL 0x1f + MX8MM_IOMUXC_GPIO1_IO09_GPIO1_IO9 0x19 + >; + }; + + pinctrl_flexspi0: flexspi0-grp { + fsl,pins = < + MX8MM_IOMUXC_NAND_ALE_QSPI_A_SCLK 0x1c2 + MX8MM_IOMUXC_NAND_CE0_B_QSPI_A_SS0_B 0x82 + MX8MM_IOMUXC_NAND_DATA00_QSPI_A_DATA0 0x82 + MX8MM_IOMUXC_NAND_DATA01_QSPI_A_DATA1 0x82 + MX8MM_IOMUXC_NAND_DATA02_QSPI_A_DATA2 0x82 + MX8MM_IOMUXC_NAND_DATA03_QSPI_A_DATA3 0x82 + MX8MM_IOMUXC_NAND_DQS_QSPI_A_DQS 0x82 + >; + }; + + pinctrl_flexspi1: flexspi1-grp { + fsl,pins = < + MX8MM_IOMUXC_NAND_CLE_QSPI_B_SCLK 0x1c2 + MX8MM_IOMUXC_NAND_CE2_B_QSPI_B_SS0_B 0x82 + MX8MM_IOMUXC_NAND_DATA04_QSPI_B_DATA0 0x82 + MX8MM_IOMUXC_NAND_DATA05_QSPI_B_DATA1 0x82 + MX8MM_IOMUXC_NAND_DATA06_QSPI_B_DATA2 0x82 + MX8MM_IOMUXC_NAND_DATA07_QSPI_B_DATA3 0x82 + >; + }; + + pinctrl_gpio_led: gpio-led-grp { + fsl,pins = < + MX8MM_IOMUXC_ECSPI2_SCLK_GPIO5_IO10 0x19 + MX8MM_IOMUXC_NAND_CE3_B_GPIO3_IO4 0x19 + >; + }; + + pinctrl_i2c1: i2c1-grp { + fsl,pins = < + MX8MM_IOMUXC_I2C1_SCL_I2C1_SCL 0x400001c3 + MX8MM_IOMUXC_I2C1_SDA_I2C1_SDA 0x400001c3 + >; + }; + + pinctrl_i2c2: i2c2grp { + fsl,pins = < + MX8MM_IOMUXC_I2C2_SCL_I2C2_SCL 0x400001c3 + MX8MM_IOMUXC_I2C2_SDA_I2C2_SDA 0x400001c3 + >; + }; + + pinctrl_i2c3: i2c3-grp { + fsl,pins = < + MX8MM_IOMUXC_I2C3_SCL_I2C3_SCL 0x400001c3 + MX8MM_IOMUXC_I2C3_SDA_I2C3_SDA 0x400001c3 + >; + }; + + pinctrl_lvds: lvds-grp { + fsl,pins = < + MX8MM_IOMUXC_SAI5_MCLK_GPIO3_IO25 0x06 + >; + }; + + pinctrl_pcie0: pcie0-grp { + fsl,pins = < + MX8MM_IOMUXC_SAI5_RXC_GPIO3_IO20 0x41 + MX8MM_IOMUXC_SAI5_RXFS_GPIO3_IO19 0x41 + >; + }; + + pinctrl_pmic: pmic-irq { + fsl,pins = < + MX8MM_IOMUXC_NAND_CE1_B_GPIO3_IO2 0x41 + >; + }; + + pinctrl_pwm1: pwm1-grp { + fsl,pins = < + MX8MM_IOMUXC_GPIO1_IO01_PWM1_OUT 0x06 + >; + }; + + pinctrl_sai2: sai2-grp { + fsl,pins = < + MX8MM_IOMUXC_SAI2_MCLK_SAI2_MCLK 0xd6 + MX8MM_IOMUXC_SAI2_RXC_SAI2_RX_BCLK 0xd6 + MX8MM_IOMUXC_SAI2_RXD0_SAI2_RX_DATA0 0xd6 + MX8MM_IOMUXC_SAI2_RXFS_SAI2_RX_SYNC 0xd6 + MX8MM_IOMUXC_SAI2_TXC_SAI2_TX_BCLK 0xd6 + MX8MM_IOMUXC_SAI2_TXD0_SAI2_TX_DATA0 0xd6 + MX8MM_IOMUXC_SAI2_TXFS_SAI2_TX_SYNC 0xd6 + >; + }; + + pinctrl_spdif1: spdif1-grp { + fsl,pins = < + MX8MM_IOMUXC_SPDIF_TX_SPDIF1_OUT 0xd6 + MX8MM_IOMUXC_SPDIF_RX_SPDIF1_IN 0xd6 + >; + }; + + pinctrl_uart1: uart1-grp { + fsl,pins = < + MX8MM_IOMUXC_UART1_RXD_UART1_DCE_RX 0x140 + MX8MM_IOMUXC_UART1_TXD_UART1_DCE_TX 0x140 + >; + }; + + pinctrl_uart2: uart2-grp { + fsl,pins = < + MX8MM_IOMUXC_UART2_RXD_UART2_DCE_RX 0x140 + MX8MM_IOMUXC_UART2_TXD_UART2_DCE_TX 0x140 + + /* rts and cts */ + MX8MM_IOMUXC_SAI3_RXC_UART2_DCE_CTS_B 0x140 + MX8MM_IOMUXC_SAI3_RXD_UART2_DCE_RTS_B 0x140 + >; + }; + + pinctrl_uart3: uart3-grp { + fsl,pins = < + MX8MM_IOMUXC_UART3_RXD_UART3_DCE_RX 0x140 + MX8MM_IOMUXC_UART3_TXD_UART3_DCE_TX 0x140 + >; + }; + + pinctrl_uart4: uart4-grp { + fsl,pins = < + MX8MM_IOMUXC_UART4_RXD_UART4_DCE_RX 0x140 + MX8MM_IOMUXC_UART4_TXD_UART4_DCE_TX 0x140 + >; + }; + + pinctrl_usdhc1: usdhc1-grp { + fsl,pins = < + MX8MM_IOMUXC_SD1_CLK_USDHC1_CLK 0x190 + MX8MM_IOMUXC_SD1_CMD_USDHC1_CMD 0x1d0 + MX8MM_IOMUXC_SD1_DATA0_USDHC1_DATA0 0x1d0 + MX8MM_IOMUXC_SD1_DATA1_USDHC1_DATA1 0x1d0 + MX8MM_IOMUXC_SD1_DATA2_USDHC1_DATA2 0x1d0 + MX8MM_IOMUXC_SD1_DATA3_USDHC1_DATA3 0x1d0 + MX8MM_IOMUXC_SD1_DATA4_USDHC1_DATA4 0x1d0 + MX8MM_IOMUXC_SD1_DATA5_USDHC1_DATA5 0x1d0 + MX8MM_IOMUXC_SD1_DATA6_USDHC1_DATA6 0x1d0 + MX8MM_IOMUXC_SD1_DATA7_USDHC1_DATA7 0x1d0 + >; + }; + + pinctrl_usdhc1_100mhz: usdhc1-100mhz-grp { + fsl,pins = < + MX8MM_IOMUXC_SD1_CLK_USDHC1_CLK 0x194 + MX8MM_IOMUXC_SD1_CMD_USDHC1_CMD 0x1d4 + MX8MM_IOMUXC_SD1_DATA0_USDHC1_DATA0 0x1d4 + MX8MM_IOMUXC_SD1_DATA1_USDHC1_DATA1 0x1d4 + MX8MM_IOMUXC_SD1_DATA2_USDHC1_DATA2 0x1d4 + MX8MM_IOMUXC_SD1_DATA3_USDHC1_DATA3 0x1d4 + MX8MM_IOMUXC_SD1_DATA4_USDHC1_DATA4 0x1d4 + MX8MM_IOMUXC_SD1_DATA5_USDHC1_DATA5 0x1d4 + MX8MM_IOMUXC_SD1_DATA6_USDHC1_DATA6 0x1d4 + MX8MM_IOMUXC_SD1_DATA7_USDHC1_DATA7 0x1d4 + >; + }; + + pinctrl_usdhc1_200mhz: usdhc1-200mhz-grp { + fsl,pins = < + MX8MM_IOMUXC_SD1_CLK_USDHC1_CLK 0x196 + MX8MM_IOMUXC_SD1_CMD_USDHC1_CMD 0x1d6 + MX8MM_IOMUXC_SD1_DATA0_USDHC1_DATA0 0x1d6 + MX8MM_IOMUXC_SD1_DATA1_USDHC1_DATA1 0x1d6 + MX8MM_IOMUXC_SD1_DATA2_USDHC1_DATA2 0x1d6 + MX8MM_IOMUXC_SD1_DATA3_USDHC1_DATA3 0x1d6 + MX8MM_IOMUXC_SD1_DATA4_USDHC1_DATA4 0x1d6 + MX8MM_IOMUXC_SD1_DATA5_USDHC1_DATA5 0x1d6 + MX8MM_IOMUXC_SD1_DATA6_USDHC1_DATA6 0x1d6 + MX8MM_IOMUXC_SD1_DATA7_USDHC1_DATA7 0x1d6 + >; + }; + + pinctrl_usdhc1_gpio: usdhc1-gpio-grp { + fsl,pins = < + MX8MM_IOMUXC_SD1_RESET_B_USDHC1_RESET_B 0x41 + MX8MM_IOMUXC_GPIO1_IO03_GPIO1_IO3 0x1c4 + >; + }; + + pinctrl_usdhc2: usdhc2-grp { + fsl,pins = < + MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK 0x190 + MX8MM_IOMUXC_SD2_CMD_USDHC2_CMD 0x1d0 + MX8MM_IOMUXC_SD2_DATA0_USDHC2_DATA0 0x1d0 + MX8MM_IOMUXC_SD2_DATA1_USDHC2_DATA1 0x1d0 + MX8MM_IOMUXC_SD2_DATA2_USDHC2_DATA2 0x1d0 + MX8MM_IOMUXC_SD2_DATA3_USDHC2_DATA3 0x1d0 + MX8MM_IOMUXC_GPIO1_IO04_USDHC2_VSELECT 0x1d0 + >; + }; + + pinctrl_usdhc2_100mhz: usdhc2-100mhz-grp { + fsl,pins = < + MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK 0x194 + MX8MM_IOMUXC_SD2_CMD_USDHC2_CMD 0x1d4 + MX8MM_IOMUXC_SD2_DATA0_USDHC2_DATA0 0x1d4 + MX8MM_IOMUXC_SD2_DATA1_USDHC2_DATA1 0x1d4 + MX8MM_IOMUXC_SD2_DATA2_USDHC2_DATA2 0x1d4 + MX8MM_IOMUXC_SD2_DATA3_USDHC2_DATA3 0x1d4 + MX8MM_IOMUXC_GPIO1_IO04_USDHC2_VSELECT 0x1d0 + >; + }; + + pinctrl_usdhc2_200mhz: usdhc2-200mhz-grp { + fsl,pins = < + MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK 0x196 + MX8MM_IOMUXC_SD2_CMD_USDHC2_CMD 0x1d6 + MX8MM_IOMUXC_SD2_DATA0_USDHC2_DATA0 0x1d6 + MX8MM_IOMUXC_SD2_DATA1_USDHC2_DATA1 0x1d6 + MX8MM_IOMUXC_SD2_DATA2_USDHC2_DATA2 0x1d6 + MX8MM_IOMUXC_SD2_DATA3_USDHC2_DATA3 0x1d6 + MX8MM_IOMUXC_GPIO1_IO04_USDHC2_VSELECT 0x1d0 + >; + }; + + /* no reset for sdhc2 interface */ + pinctrl_usdhc2_gpio: usdhc2-gpio-grp { + fsl,pins = < + MX8MM_IOMUXC_SD2_CD_B_GPIO2_IO12 0x1c4 + MX8MM_IOMUXC_SD2_WP_USDHC2_WP 0x1c4 + >; + }; + + pinctrl_wdog: wdog-grp { + fsl,pins = < + MX8MM_IOMUXC_GPIO1_IO02_WDOG1_WDOG_B 0xc6 + >; + }; +}; + +&i2c1 { + clock-frequency = <400000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c1>; + status = "okay"; +}; + +&i2c2 { + clock-frequency = <400000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c2>; + status = "okay"; +}; + +&i2c3 { + clock-frequency = <400000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c3>; + status = "okay"; + + bd71847: pmic@4b { + compatible = "rohm,bd71847"; + reg = <0x4b>; + pinctrl-0 = <&pinctrl_pmic>; + interrupt-parent = <&gpio3>; + interrupts = <2 IRQ_TYPE_LEVEL_LOW>; + rohm,reset-snvs-powered; + + regulators { + buck1_reg: BUCK1 { + regulator-name = "BUCK1"; + regulator-min-microvolt = <700000>; + regulator-max-microvolt = <1300000>; + regulator-boot-on; + regulator-always-on; + regulator-ramp-delay = <1250>; + }; + + buck2_reg: BUCK2 { + regulator-name = "BUCK2"; + regulator-min-microvolt = <700000>; + regulator-max-microvolt = <1300000>; + regulator-boot-on; + regulator-always-on; + regulator-ramp-delay = <1250>; + rohm,dvs-run-voltage = <1000000>; + rohm,dvs-idle-voltage = <900000>; + }; + + buck3_reg: BUCK3 { + // BUCK5 in datasheet + regulator-name = "BUCK3"; + regulator-min-microvolt = <700000>; + regulator-max-microvolt = <1350000>; + regulator-boot-on; + regulator-always-on; + }; + + buck4_reg: BUCK4 { + // BUCK6 in datasheet + regulator-name = "BUCK4"; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + regulator-always-on; + }; + + buck5_reg: BUCK5 { + // BUCK7 in datasheet + regulator-name = "BUCK5"; + regulator-min-microvolt = <1605000>; + regulator-max-microvolt = <1995000>; + regulator-boot-on; + regulator-always-on; + }; + + buck6_reg: BUCK6 { + // BUCK8 in datasheet + regulator-name = "BUCK6"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <1400000>; + regulator-boot-on; + regulator-always-on; + }; + + ldo1_reg: LDO1 { + regulator-name = "LDO1"; + regulator-min-microvolt = <1600000>; + regulator-max-microvolt = <1900000>; + regulator-boot-on; + regulator-always-on; + }; + + ldo2_reg: LDO2 { + regulator-name = "LDO2"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <900000>; + regulator-boot-on; + regulator-always-on; + }; + + ldo3_reg: LDO3 { + regulator-name = "LDO3"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + regulator-always-on; + }; + + ldo4_reg: LDO4 { + regulator-name = "LDO4"; + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <1800000>; + regulator-boot-on; + regulator-always-on; + }; + + ldo6_reg: LDO6 { + regulator-name = "LDO6"; + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <1800000>; + regulator-boot-on; + regulator-always-on; + }; + }; + }; + + rv1805: rtc@69 { + compatible = "abracon,ab1805"; + reg = <0x69>; + }; +}; + +&mu { + status = "okay"; +}; + +&pwm1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pwm1>; +}; + +&sai2 { + #sound-dai-cells = <0>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_sai2>; + assigned-clocks = <&clk IMX8MM_CLK_SAI2>; + assigned-clock-parents = <&clk IMX8MM_AUDIO_PLL1_OUT>; + assigned-clock-rates = <12000000>; + status = "disabled"; +}; + +&spdif1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_spdif1>; + assigned-clocks = <&clk IMX8MM_CLK_SPDIF1>; + assigned-clock-parents = <&clk IMX8MM_AUDIO_PLL1_OUT>; + assigned-clock-rates = <24576000>; + clocks = <&clk IMX8MM_CLK_AUDIO_AHB>, <&clk IMX8MM_CLK_24M>, + <&clk IMX8MM_CLK_SPDIF1>, <&clk IMX8MM_CLK_DUMMY>, + <&clk IMX8MM_CLK_DUMMY>, <&clk IMX8MM_CLK_DUMMY>, + <&clk IMX8MM_CLK_AUDIO_AHB>, <&clk IMX8MM_CLK_DUMMY>, + <&clk IMX8MM_CLK_DUMMY>, <&clk IMX8MM_CLK_DUMMY>, + <&clk IMX8MM_AUDIO_PLL1_OUT>, <&clk IMX8MM_AUDIO_PLL2_OUT>; + clock-names = "core", "rxtx0", "rxtx1", "rxtx2", "rxtx3", + "rxtx4", "rxtx5", "rxtx6", "rxtx7", "spba", "pll8k", "pll11k"; + status = "disabled"; +}; + +&uart1 { /* console */ + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart1>; + assigned-clocks = <&clk IMX8MM_CLK_UART1>; + assigned-clock-parents = <&clk IMX8MM_SYS_PLL1_80M>; + status = "okay"; +}; + +&uart2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart2>; + assigned-clocks = <&clk IMX8MM_CLK_UART2>; + assigned-clock-parents = <&clk IMX8MM_SYS_PLL1_80M>; + status = "okay"; +}; + +&uart3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart3>; + assigned-clocks = <&clk IMX8MM_CLK_UART3>; + assigned-clock-parents = <&clk IMX8MM_SYS_PLL1_80M>; + status = "okay"; +}; + +&uart4 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart4>; + assigned-clocks = <&clk IMX8MM_CLK_UART4>; + assigned-clock-parents = <&clk IMX8MM_SYS_PLL1_80M>; + status = "okay"; +}; + +&usbotg1 { + dr_mode = "otg"; + over-current-active-low; + status = "okay"; +}; + +&usbotg2 { + dr_mode = "host"; + disable-over-current; + status = "disabled"; +}; + +&usdhc1 { + pinctrl-names = "default", "state_100mhz", "state_200mhz"; + pinctrl-0 = <&pinctrl_usdhc1>, <&pinctrl_usdhc1_gpio>; + pinctrl-1 = <&pinctrl_usdhc1_100mhz>, <&pinctrl_usdhc1_gpio>; + pinctrl-2 = <&pinctrl_usdhc1_200mhz>, <&pinctrl_usdhc1_gpio>; + bus-width = <8>; + vmmc-supply = <®_usdhc1_vmmc>; + keep-power-in-suspend; + non-removable; + status = "okay"; +}; + +&usdhc2 { + pinctrl-names = "default", "state_100mhz", "state_200mhz"; + pinctrl-0 = <&pinctrl_usdhc2>, <&pinctrl_usdhc2_gpio>; + pinctrl-1 = <&pinctrl_usdhc2_100mhz>, <&pinctrl_usdhc2_gpio>; + pinctrl-2 = <&pinctrl_usdhc2_200mhz>, <&pinctrl_usdhc2_gpio>; + cd-gpios = <&gpio2 12 GPIO_ACTIVE_LOW>; + wp-gpios = <&gpio2 20 GPIO_ACTIVE_HIGH>; + bus-width = <4>; + vmmc-supply = <®_usdhc2_vmmc>; + no-1-8-v; + status = "okay"; +}; + +&wdog1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_wdog>; + fsl,ext-reset-output; + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/freescale/imx8mm-evk.dtsi b/arch/arm64/boot/dts/freescale/imx8mm-evk.dtsi index 3bac87b7e142..6d67df7692f1 100644 --- a/arch/arm64/boot/dts/freescale/imx8mm-evk.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8mm-evk.dtsi @@ -5,6 +5,7 @@ /dts-v1/; +#include <dt-bindings/phy/phy-imx8-pcie.h> #include <dt-bindings/usb/pd.h> #include "imx8mm.dtsi" @@ -30,6 +31,23 @@ }; }; + pcie0_refclk: pcie0-refclk { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <100000000>; + }; + + reg_pcie0: regulator-pcie { + compatible = "regulator-fixed"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pcie0_reg>; + regulator-name = "MPCIE_3V3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpio = <&gpio1 5 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + reg_usdhc2_vmmc: regulator-usdhc2 { compatible = "regulator-fixed"; pinctrl-names = "default"; @@ -296,6 +314,30 @@ }; }; +&pcie_phy { + fsl,refclk-pad-mode = <IMX8_PCIE_REFCLK_PAD_INPUT>; + fsl,tx-deemph-gen1 = <0x2d>; + fsl,tx-deemph-gen2 = <0xf>; + clocks = <&pcie0_refclk>; + status = "okay"; +}; + +&pcie0 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pcie0>; + reset-gpio = <&gpio4 21 GPIO_ACTIVE_LOW>; + clocks = <&clk IMX8MM_CLK_PCIE1_ROOT>, <&clk IMX8MM_CLK_PCIE1_AUX>, + <&pcie0_refclk>; + clock-names = "pcie", "pcie_aux", "pcie_bus"; + assigned-clocks = <&clk IMX8MM_CLK_PCIE1_AUX>, + <&clk IMX8MM_CLK_PCIE1_CTRL>; + assigned-clock-rates = <10000000>, <250000000>; + assigned-clock-parents = <&clk IMX8MM_SYS_PLL2_50M>, + <&clk IMX8MM_SYS_PLL2_250M>; + vpcie-supply = <®_pcie0>; + status = "okay"; +}; + &sai3 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_sai3>; @@ -413,6 +455,19 @@ >; }; + pinctrl_pcie0: pcie0grp { + fsl,pins = < + MX8MM_IOMUXC_I2C4_SCL_PCIE1_CLKREQ_B 0x61 + MX8MM_IOMUXC_SAI2_RXFS_GPIO4_IO21 0x41 + >; + }; + + pinctrl_pcie0_reg: pcie0reggrp { + fsl,pins = < + MX8MM_IOMUXC_GPIO1_IO05_GPIO1_IO5 0x41 + >; + }; + pinctrl_pmic: pmicirqgrp { fsl,pins = < MX8MM_IOMUXC_GPIO1_IO03_GPIO1_IO3 0x141 diff --git a/arch/arm64/boot/dts/freescale/imx8mm-pinfunc.h b/arch/arm64/boot/dts/freescale/imx8mm-pinfunc.h index a003e6af3353..83c8f715cd90 100644 --- a/arch/arm64/boot/dts/freescale/imx8mm-pinfunc.h +++ b/arch/arm64/boot/dts/freescale/imx8mm-pinfunc.h @@ -248,6 +248,7 @@ #define MX8MM_IOMUXC_NAND_RE_B_GPIO3_IO15 0x130 0x398 0x000 0x5 0x0 #define MX8MM_IOMUXC_NAND_RE_B_SIM_M_HADDR11 0x130 0x398 0x000 0x7 0x0 #define MX8MM_IOMUXC_NAND_READY_B_RAWNAND_READY_B 0x134 0x39C 0x000 0x0 0x0 +#define MX8MM_IOMUXC_NAND_READY_B_SD3_RESET_B 0x134 0x39C 0x000 0x2 0x0 #define MX8MM_IOMUXC_NAND_READY_B_GPIO3_IO16 0x134 0x39C 0x000 0x5 0x0 #define MX8MM_IOMUXC_NAND_READY_B_SIM_M_HADDR12 0x134 0x39C 0x000 0x7 0x0 #define MX8MM_IOMUXC_NAND_WE_B_RAWNAND_WE_B 0x138 0x3A0 0x000 0x0 0x0 @@ -279,7 +280,7 @@ #define MX8MM_IOMUXC_SAI5_RXD2_SAI1_TX_DATA4 0x150 0x3B8 0x000 0x1 0x0 #define MX8MM_IOMUXC_SAI5_RXD2_SAI1_TX_SYNC 0x150 0x3B8 0x4CC 0x2 0x1 #define MX8MM_IOMUXC_SAI5_RXD2_SAI5_TX_BCLK 0x150 0x3B8 0x4E8 0x3 0x0 -#define MX8MM_IOMUXC_SAI5_RXD2_PDM_DATA2 0x150 0x3B8 0x53c 0x4 0x0 +#define MX8MM_IOMUXC_SAI5_RXD2_PDM_DATA2 0x150 0x3B8 0x53C 0x4 0x0 #define MX8MM_IOMUXC_SAI5_RXD2_GPIO3_IO23 0x150 0x3B8 0x000 0x5 0x0 #define MX8MM_IOMUXC_SAI5_RXD3_SAI5_RX_DATA3 0x154 0x3BC 0x4E0 0x0 0x0 #define MX8MM_IOMUXC_SAI5_RXD3_SAI1_TX_DATA5 0x154 0x3BC 0x000 0x1 0x0 @@ -486,7 +487,7 @@ #define MX8MM_IOMUXC_SAI3_TXFS_SAI3_TX_SYNC 0x1D8 0x440 0x000 0x0 0x0 #define MX8MM_IOMUXC_SAI3_TXFS_GPT1_CAPTURE2 0x1D8 0x440 0x000 0x1 0x0 #define MX8MM_IOMUXC_SAI3_TXFS_SAI5_RX_DATA1 0x1D8 0x440 0x4D8 0x2 0x2 -#define MX8MM_IOMUXC_SAI3_TXFS_UART2_DCE_RX 0x1D8 0x440 0x4Fc 0x4 0x2 +#define MX8MM_IOMUXC_SAI3_TXFS_UART2_DCE_RX 0x1D8 0x440 0x4FC 0x4 0x2 #define MX8MM_IOMUXC_SAI3_TXFS_UART2_DTE_TX 0x1D8 0x440 0x000 0x4 0x0 #define MX8MM_IOMUXC_SAI3_TXFS_GPIO4_IO31 0x1D8 0x440 0x000 0x5 0x0 #define MX8MM_IOMUXC_SAI3_TXFS_TPSMP_HDATA1 0x1D8 0x440 0x000 0x7 0x0 @@ -494,7 +495,7 @@ #define MX8MM_IOMUXC_SAI3_TXC_GPT1_COMPARE2 0x1DC 0x444 0x000 0x1 0x0 #define MX8MM_IOMUXC_SAI3_TXC_SAI5_RX_DATA2 0x1DC 0x444 0x4DC 0x2 0x2 #define MX8MM_IOMUXC_SAI3_TXC_UART2_DCE_TX 0x1DC 0x444 0x000 0x4 0x0 -#define MX8MM_IOMUXC_SAI3_TXC_UART2_DTE_RX 0x1DC 0x444 0x4Fc 0x4 0x3 +#define MX8MM_IOMUXC_SAI3_TXC_UART2_DTE_RX 0x1DC 0x444 0x4FC 0x4 0x3 #define MX8MM_IOMUXC_SAI3_TXC_GPIO5_IO0 0x1DC 0x444 0x000 0x5 0x0 #define MX8MM_IOMUXC_SAI3_TXC_TPSMP_HDATA2 0x1DC 0x444 0x000 0x7 0x0 #define MX8MM_IOMUXC_SAI3_TXD_SAI3_TX_DATA0 0x1E0 0x448 0x000 0x0 0x0 diff --git a/arch/arm64/boot/dts/freescale/imx8mm-prt8mm.dts b/arch/arm64/boot/dts/freescale/imx8mm-prt8mm.dts new file mode 100644 index 000000000000..9fbbbb556c0b --- /dev/null +++ b/arch/arm64/boot/dts/freescale/imx8mm-prt8mm.dts @@ -0,0 +1,304 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright 2020 Protonic Holland + * Copyright 2019 NXP + */ + +/dts-v1/; + +#include <dt-bindings/usb/pd.h> +#include "imx8mm.dtsi" + +/ { + model = "Protonic PRT8MM"; + compatible = "prt,prt8mm", "fsl,imx8mm"; + + chosen { + stdout-path = &uart4; + }; + + memory@40000000 { + device_type = "memory"; + reg = <0x0 0x40000000 0 0x40000000>; + }; + + leds { + compatible = "gpio-leds"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_gpio_leds>; + + debug-led0 { + label = "DEBUG_LED0"; + gpios = <&gpio3 0 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "heartbeat"; + }; + + debug-led1 { + label = "DEBUG_LED1"; + gpios = <&gpio3 1 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "cpu"; + }; + }; + + sound-ssm2518 { + compatible = "simple-audio-card"; + simple-audio-card,name = "ssm2518-audio"; + simple-audio-card,format = "i2s"; + simple-audio-card,frame-master = <&cpudai>; + simple-audio-card,bitclock-master = <&cpudai>; + + cpudai: simple-audio-card,cpu { + sound-dai = <&sai3>; + }; + + simple-audio-card,codec { + sound-dai = <&ssm2518>; + clocks = <&clk IMX8MM_CLK_SAI3_ROOT>; + }; + }; +}; + +&i2c1 { + clock-frequency = <400000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c1>; + status = "okay"; + + ssm2518: audio-codec@34 { + compatible = "adi,ssm2518"; + reg = <0x34>; + #sound-dai-cells = <0>; + }; +}; + +&i2c2 { + clock-frequency = <400000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c2>; + status = "okay"; + + regulator@60 { + compatible = "fcs,fan53555"; + reg = <0x60>; + regulator-name = "0V9_CORE"; + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <980000>; + regulator-boot-on; + regulator-always-on; + }; +}; + +&i2c3 { + clock-frequency = <400000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c3>; + status = "okay"; + + rtc@51 { + compatible = "nxp,pcf85363"; + reg = <0x51>; + }; + + touchscreeen@5d { + compatible = "goodix,gt911"; + reg = <0x5d>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_touchscreen>; + interrupt-parent = <&gpio1>; + interrupts = <8 IRQ_TYPE_NONE>; + irq-gpios = <&gpio1 8 GPIO_ACTIVE_HIGH>; + reset-gpios = <&gpio1 9 GPIO_ACTIVE_HIGH>; + }; + + temp-sense@70 { + compatible = "ti,tmp103"; + reg = <0x70>; + }; +}; + +&sai3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_sai3>; + assigned-clocks = <&clk IMX8MM_CLK_SAI3>; + assigned-clock-parents = <&clk IMX8MM_AUDIO_PLL1_OUT>; + assigned-clock-rates = <12288000>; + fsl,sai-mclk-direction-output; + fsl,sai-asynchronous; + status = "okay"; +}; + +&snvs_pwrkey { + status = "okay"; +}; + +&uart4 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart4>; + status = "okay"; +}; + +&usbotg1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usbotg1>; + dr_mode = "host"; + disable-over-current; + power-active-high; + status = "okay"; +}; + +&usdhc2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usdhc2>; + assigned-clocks = <&clk IMX8MM_CLK_USDHC2>; + assigned-clock-rates = <100000000>; + cd-gpios = <&gpio2 12 GPIO_ACTIVE_LOW>; + bus-width = <4>; + status = "okay"; +}; + +&usdhc3 { + pinctrl-names = "default", "state_100mhz", "state_200mhz"; + pinctrl-0 = <&pinctrl_usdhc3>; + pinctrl-1 = <&pinctrl_usdhc3_100mhz>; + pinctrl-2 = <&pinctrl_usdhc3_200mhz>; + assigned-clocks = <&clk IMX8MM_CLK_USDHC3_ROOT>; + assigned-clock-rates = <400000000>; + bus-width = <8>; + non-removable; + no-sdio; + no-sd; + status = "okay"; +}; + +&wdog1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_wdog>; + fsl,ext-reset-output; + status = "okay"; +}; + +&iomuxc { + pinctrl_gpio_leds: ledsgrp { + fsl,pins = < + MX8MM_IOMUXC_NAND_ALE_GPIO3_IO0 0x00 + MX8MM_IOMUXC_NAND_CE0_B_GPIO3_IO1 0x00 + >; + }; + + pinctrl_i2c1: i2c1grp { + fsl,pins = < + MX8MM_IOMUXC_I2C1_SCL_I2C1_SCL 0x400000c3 + MX8MM_IOMUXC_I2C1_SDA_I2C1_SDA 0x400000c3 + >; + }; + + pinctrl_i2c2: i2c2grp { + fsl,pins = < + MX8MM_IOMUXC_I2C2_SCL_I2C2_SCL 0x400000c3 + MX8MM_IOMUXC_I2C2_SDA_I2C2_SDA 0x400000c3 + >; + }; + + pinctrl_i2c3: i2c3grp { + fsl,pins = < + MX8MM_IOMUXC_I2C3_SCL_I2C3_SCL 0x400000c3 + MX8MM_IOMUXC_I2C3_SDA_I2C3_SDA 0x400000c3 + >; + }; + + pinctrl_sai3: sai3grp { + fsl,pins = < + MX8MM_IOMUXC_SAI3_TXFS_SAI3_TX_SYNC 0xd6 + MX8MM_IOMUXC_SAI3_TXC_SAI3_TX_BCLK 0xd6 + MX8MM_IOMUXC_SAI3_MCLK_SAI3_MCLK 0xd6 + MX8MM_IOMUXC_SAI3_TXD_SAI3_TX_DATA0 0xd6 + >; + }; + + pinctrl_touchscreen: tsgrp { + fsl,pins = < + MX8MM_IOMUXC_GPIO1_IO08_GPIO1_IO8 0x80 + MX8MM_IOMUXC_GPIO1_IO09_GPIO1_IO9 0x80 + >; + }; + + pinctrl_uart4: uart4grp { + fsl,pins = < + MX8MM_IOMUXC_UART4_RXD_UART4_DCE_RX 0x040 + MX8MM_IOMUXC_UART4_TXD_UART4_DCE_TX 0x040 + >; + }; + + pinctrl_usbotg1: usbotg1grp { + fsl,pins = < + MX8MM_IOMUXC_GPIO1_IO12_USB1_OTG_PWR 0x000 + MX8MM_IOMUXC_GPIO1_IO13_USB1_OTG_OC 0x000 + >; + }; + + pinctrl_usdhc2: usdhc2grp { + fsl,pins = < + MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK 0x190 + MX8MM_IOMUXC_SD2_CMD_USDHC2_CMD 0x1d0 + MX8MM_IOMUXC_SD2_DATA0_USDHC2_DATA0 0x1d0 + MX8MM_IOMUXC_SD2_DATA1_USDHC2_DATA1 0x1d0 + MX8MM_IOMUXC_SD2_DATA2_USDHC2_DATA2 0x1d0 + MX8MM_IOMUXC_SD2_DATA3_USDHC2_DATA3 0x1d0 + MX8MM_IOMUXC_SD2_CD_B_GPIO2_IO12 0x0d4 + >; + }; + + pinctrl_usdhc3: usdhc3grp { + fsl,pins = < + MX8MM_IOMUXC_NAND_WE_B_USDHC3_CLK 0x190 + MX8MM_IOMUXC_NAND_WP_B_USDHC3_CMD 0x1d0 + MX8MM_IOMUXC_NAND_DATA04_USDHC3_DATA0 0x1d0 + MX8MM_IOMUXC_NAND_DATA05_USDHC3_DATA1 0x1d0 + MX8MM_IOMUXC_NAND_DATA06_USDHC3_DATA2 0x1d0 + MX8MM_IOMUXC_NAND_DATA07_USDHC3_DATA3 0x1d0 + MX8MM_IOMUXC_NAND_RE_B_USDHC3_DATA4 0x1d0 + MX8MM_IOMUXC_NAND_CE2_B_USDHC3_DATA5 0x1d0 + MX8MM_IOMUXC_NAND_CE3_B_USDHC3_DATA6 0x1d0 + MX8MM_IOMUXC_NAND_CLE_USDHC3_DATA7 0x1d0 + MX8MM_IOMUXC_NAND_CE1_B_USDHC3_STROBE 0x190 + >; + }; + + pinctrl_usdhc3_100mhz: usdhc3grp100mhz { + fsl,pins = < + MX8MM_IOMUXC_NAND_WE_B_USDHC3_CLK 0x194 + MX8MM_IOMUXC_NAND_WP_B_USDHC3_CMD 0x1d4 + MX8MM_IOMUXC_NAND_DATA04_USDHC3_DATA0 0x1d4 + MX8MM_IOMUXC_NAND_DATA05_USDHC3_DATA1 0x1d4 + MX8MM_IOMUXC_NAND_DATA06_USDHC3_DATA2 0x1d4 + MX8MM_IOMUXC_NAND_DATA07_USDHC3_DATA3 0x1d4 + MX8MM_IOMUXC_NAND_RE_B_USDHC3_DATA4 0x1d4 + MX8MM_IOMUXC_NAND_CE2_B_USDHC3_DATA5 0x1d4 + MX8MM_IOMUXC_NAND_CE3_B_USDHC3_DATA6 0x1d4 + MX8MM_IOMUXC_NAND_CLE_USDHC3_DATA7 0x1d4 + MX8MM_IOMUXC_NAND_CE1_B_USDHC3_STROBE 0x194 + >; + }; + + pinctrl_usdhc3_200mhz: usdhc3grp200mhz { + fsl,pins = < + MX8MM_IOMUXC_NAND_WE_B_USDHC3_CLK 0x196 + MX8MM_IOMUXC_NAND_WP_B_USDHC3_CMD 0x1d6 + MX8MM_IOMUXC_NAND_DATA04_USDHC3_DATA0 0x1d6 + MX8MM_IOMUXC_NAND_DATA05_USDHC3_DATA1 0x1d6 + MX8MM_IOMUXC_NAND_DATA06_USDHC3_DATA2 0x1d6 + MX8MM_IOMUXC_NAND_DATA07_USDHC3_DATA3 0x1d6 + MX8MM_IOMUXC_NAND_RE_B_USDHC3_DATA4 0x1d6 + MX8MM_IOMUXC_NAND_CE2_B_USDHC3_DATA5 0x1d6 + MX8MM_IOMUXC_NAND_CE3_B_USDHC3_DATA6 0x1d6 + MX8MM_IOMUXC_NAND_CLE_USDHC3_DATA7 0x1d6 + MX8MM_IOMUXC_NAND_CE1_B_USDHC3_STROBE 0x196 + >; + }; + + pinctrl_wdog: wdoggrp { + fsl,pins = < + MX8MM_IOMUXC_GPIO1_IO02_WDOG1_WDOG_B 0xc6 + >; + }; +}; diff --git a/arch/arm64/boot/dts/freescale/imx8mm-tqma8mqml-mba8mx.dts b/arch/arm64/boot/dts/freescale/imx8mm-tqma8mqml-mba8mx.dts index 7844878788f4..286d2df01cfa 100644 --- a/arch/arm64/boot/dts/freescale/imx8mm-tqma8mqml-mba8mx.dts +++ b/arch/arm64/boot/dts/freescale/imx8mm-tqma8mqml-mba8mx.dts @@ -5,6 +5,7 @@ /dts-v1/; +#include <dt-bindings/phy/phy-imx8-pcie.h> #include "imx8mm-tqma8mqml.dtsi" #include "mba8mx.dtsi" @@ -58,6 +59,24 @@ }; }; +&pcie_phy { + clocks = <&pcie0_refclk>; + status = "okay"; +}; + +&pcie0 { + reset-gpio = <&expander0 14 GPIO_ACTIVE_LOW>; + clocks = <&clk IMX8MM_CLK_PCIE1_ROOT>, <&clk IMX8MM_CLK_PCIE1_AUX>, + <&pcie0_refclk>; + clock-names = "pcie", "pcie_aux", "pcie_bus"; + assigned-clocks = <&clk IMX8MM_CLK_PCIE1_AUX>, + <&clk IMX8MM_CLK_PCIE1_CTRL>; + assigned-clock-rates = <10000000>, <250000000>; + assigned-clock-parents = <&clk IMX8MM_SYS_PLL2_50M>, + <&clk IMX8MM_SYS_PLL2_250M>; + status = "okay"; +}; + &sai3 { assigned-clocks = <&clk IMX8MM_CLK_SAI3>; assigned-clock-parents = <&clk IMX8MM_AUDIO_PLL1_OUT>; diff --git a/arch/arm64/boot/dts/freescale/imx8mm-tqma8mqml.dtsi b/arch/arm64/boot/dts/freescale/imx8mm-tqma8mqml.dtsi index 284e62acc0b4..16ee9b5179e6 100644 --- a/arch/arm64/boot/dts/freescale/imx8mm-tqma8mqml.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8mm-tqma8mqml.dtsi @@ -227,6 +227,11 @@ }; }; +&pcie_phy { + fsl,refclk-pad-mode = <IMX8_PCIE_REFCLK_PAD_INPUT>; + fsl,clkreq-unsupported; +}; + &usdhc3 { pinctrl-names = "default", "state_100mhz", "state_200mhz"; pinctrl-0 = <&pinctrl_usdhc3>; diff --git a/arch/arm64/boot/dts/freescale/imx8mm-venice-gw71xx.dtsi b/arch/arm64/boot/dts/freescale/imx8mm-venice-gw71xx.dtsi index 28012279f6f6..73addc0b8e57 100644 --- a/arch/arm64/boot/dts/freescale/imx8mm-venice-gw71xx.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8mm-venice-gw71xx.dtsi @@ -5,6 +5,7 @@ #include <dt-bindings/gpio/gpio.h> #include <dt-bindings/leds/common.h> +#include <dt-bindings/phy/phy-imx8-pcie.h> / { aliases { @@ -33,6 +34,12 @@ }; }; + pcie0_refclk: pcie0-refclk { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <100000000>; + }; + pps { compatible = "pps-gpio"; pinctrl-names = "default"; @@ -61,6 +68,20 @@ status = "okay"; }; +&gpio1 { + gpio-line-names = "", "", "", "", "", "", "pci_usb_sel", "dio0", + "", "dio1", "", "", "", "", "", "", + "", "", "", "", "", "", "", "", + "", "", "", "", "", "", "", ""; +}; + +&gpio4 { + gpio-line-names = "", "", "", "dio2", "dio3", "", "", "pci_wdis#", + "", "", "", "", "", "", "", "", + "", "", "", "", "", "", "", "", + "", "", "", "", "", "", "", ""; +}; + &i2c2 { clock-frequency = <400000>; pinctrl-names = "default"; @@ -87,6 +108,28 @@ status = "okay"; }; +&pcie_phy { + fsl,refclk-pad-mode = <IMX8_PCIE_REFCLK_PAD_INPUT>; + fsl,clkreq-unsupported; + clocks = <&pcie0_refclk>; + status = "okay"; +}; + +&pcie0 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pcie0>; + reset-gpio = <&gpio4 6 GPIO_ACTIVE_LOW>; + clocks = <&clk IMX8MM_CLK_PCIE1_ROOT>, <&clk IMX8MM_CLK_PCIE1_AUX>, + <&pcie0_refclk>; + clock-names = "pcie", "pcie_aux", "pcie_bus"; + assigned-clocks = <&clk IMX8MM_CLK_PCIE1_AUX>, + <&clk IMX8MM_CLK_PCIE1_CTRL>; + assigned-clock-rates = <10000000>, <250000000>; + assigned-clock-parents = <&clk IMX8MM_SYS_PLL2_50M>, + <&clk IMX8MM_SYS_PLL2_250M>; + status = "okay"; +}; + /* GPS */ &uart1 { pinctrl-names = "default"; @@ -148,6 +191,12 @@ >; }; + pinctrl_pcie0: pcie0grp { + fsl,pins = < + MX8MM_IOMUXC_SAI1_RXD4_GPIO4_IO6 0x41 + >; + }; + pinctrl_pps: ppsgrp { fsl,pins = < MX8MM_IOMUXC_GPIO1_IO15_GPIO1_IO15 0x41 diff --git a/arch/arm64/boot/dts/freescale/imx8mm-venice-gw72xx-0x-imx219.dts b/arch/arm64/boot/dts/freescale/imx8mm-venice-gw72xx-0x-imx219.dts new file mode 100644 index 000000000000..4eaf8aabcbff --- /dev/null +++ b/arch/arm64/boot/dts/freescale/imx8mm-venice-gw72xx-0x-imx219.dts @@ -0,0 +1,93 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright 2022 Gateworks Corporation + */ + +#include <dt-bindings/gpio/gpio.h> + +#include "imx8mm-pinfunc.h" + +/dts-v1/; +/plugin/; + +&{/} { + compatible = "gw,imx8mm-gw72xx-0x", "fsl,imx8mm"; + + reg_cam: regulator-cam { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_reg_cam>; + compatible = "regulator-fixed"; + regulator-name = "reg_cam"; + gpio = <&gpio1 1 GPIO_ACTIVE_HIGH>; + enable-active-high; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + cam24m: cam24m { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <24000000>; + clock-output-names = "cam24m"; + }; +}; + +&csi { + status = "okay"; +}; + +&i2c3 { + #address-cells = <1>; + #size-cells = <0>; + + imx219: sensor@10 { + compatible = "sony,imx219"; + reg = <0x10>; + clocks = <&cam24m>; + VDIG-supply = <®_cam>; + + port { + /* MIPI CSI-2 bus endpoint */ + imx219_to_mipi_csi2: endpoint { + remote-endpoint = <&imx8mm_mipi_csi_in>; + clock-lanes = <0>; + data-lanes = <1 2>; + link-frequencies = /bits/ 64 <456000000>; + }; + }; + }; +}; + +&mipi_csi { + status = "okay"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + imx8mm_mipi_csi_in: endpoint { + remote-endpoint = <&imx219_to_mipi_csi2>; + data-lanes = <1 2>; + }; + }; + + port@1 { + reg = <1>; + + imx8mm_mipi_csi_out: endpoint { + remote-endpoint = <&csi_in>; + }; + }; + }; +}; + +&iomuxc { + pinctrl_reg_cam: regcamgrp { + fsl,pins = < + MX8MM_IOMUXC_GPIO1_IO01_GPIO1_IO1 0x41 + >; + }; +}; diff --git a/arch/arm64/boot/dts/freescale/imx8mm-venice-gw72xx-0x-rs232-rts.dts b/arch/arm64/boot/dts/freescale/imx8mm-venice-gw72xx-0x-rs232-rts.dts new file mode 100644 index 000000000000..3ea73a6886ff --- /dev/null +++ b/arch/arm64/boot/dts/freescale/imx8mm-venice-gw72xx-0x-rs232-rts.dts @@ -0,0 +1,53 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright 2022 Gateworks Corporation + * + * GW72xx RS232 with RTS/CTS hardware flow control: + * - GPIO4_0 rs485_en needs to be driven low (in-active) + * - UART4_TX becomes RTS + * - UART4_RX becomes CTS + */ + +#include <dt-bindings/gpio/gpio.h> + +#include "imx8mm-pinfunc.h" + +/dts-v1/; +/plugin/; + +&{/} { + compatible = "gw,imx8mm-gw72xx-0x"; +}; + +&gpio4 { + rs485_en { + gpio-hog; + gpios = <0 GPIO_ACTIVE_HIGH>; + output-low; + line-name = "rs485_en"; + }; +}; + +&uart2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart2>; + rts-gpios = <&gpio5 29 GPIO_ACTIVE_LOW>; + cts-gpios = <&gpio5 28 GPIO_ACTIVE_LOW>; + uart-has-rtscts; + status = "okay"; +}; + +&uart4 { + status = "disabled"; +}; + +&iomuxc { + pinctrl_uart2: uart2grp { + fsl,pins = < + MX8MM_IOMUXC_UART2_RXD_UART2_DCE_RX 0x140 + MX8MM_IOMUXC_UART2_TXD_UART2_DCE_TX 0x140 + MX8MM_IOMUXC_UART4_TXD_GPIO5_IO29 0x140 + MX8MM_IOMUXC_UART4_RXD_GPIO5_IO28 0x140 + >; + }; +}; diff --git a/arch/arm64/boot/dts/freescale/imx8mm-venice-gw72xx-0x-rs422.dts b/arch/arm64/boot/dts/freescale/imx8mm-venice-gw72xx-0x-rs422.dts new file mode 100644 index 000000000000..c3cd9f2b0db3 --- /dev/null +++ b/arch/arm64/boot/dts/freescale/imx8mm-venice-gw72xx-0x-rs422.dts @@ -0,0 +1,61 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright 2022 Gateworks Corporation + * + * GW72xx RS422 (RS485 full duplex): + * - GPIO1_0 rs485_term selects on-chip termination + * - GPIO4_0 rs485_en needs to be driven high (active) + * - GPIO4_2 rs485_hd needs to be driven low (in-active) + * - UART4_TX is DE for RS485 transmitter + * - RS485_EN needs to be pulled high + * - RS485_HALF needs to be low + */ + +#include <dt-bindings/gpio/gpio.h> + +#include "imx8mm-pinfunc.h" + +/dts-v1/; +/plugin/; + +&{/} { + compatible = "gw,imx8mm-gw72xx-0x"; +}; + +&gpio4 { + rs485_en { + gpio-hog; + gpios = <0 GPIO_ACTIVE_HIGH>; + output-high; + line-name = "rs485_en"; + }; + + rs485_hd { + gpio-hog; + gpios = <2 GPIO_ACTIVE_HIGH>; + output-low; + line-name = "rs485_hd"; + }; +}; + +&uart2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart2>; + rts-gpios = <&gpio5 29 GPIO_ACTIVE_HIGH>; + linux,rs485-enabled-at-boot-time; + status = "okay"; +}; + +&uart4 { + status = "disabled"; +}; + +&iomuxc { + pinctrl_uart2: uart2grp { + fsl,pins = < + MX8MM_IOMUXC_UART2_RXD_UART2_DCE_RX 0x140 + MX8MM_IOMUXC_UART2_TXD_UART2_DCE_TX 0x140 + MX8MM_IOMUXC_UART4_TXD_GPIO5_IO29 0x140 + >; + }; +}; diff --git a/arch/arm64/boot/dts/freescale/imx8mm-venice-gw72xx-0x-rs485.dts b/arch/arm64/boot/dts/freescale/imx8mm-venice-gw72xx-0x-rs485.dts new file mode 100644 index 000000000000..cc0a287226ab --- /dev/null +++ b/arch/arm64/boot/dts/freescale/imx8mm-venice-gw72xx-0x-rs485.dts @@ -0,0 +1,61 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright 2022 Gateworks Corporation + * + * GW72xx RS485 HD: + * - GPIO1_0 rs485_term selects on-chip termination + * - GPIO4_0 rs485_en needs to be driven high (active) + * - GPIO4_2 rs485_hd needs to be driven high (active) + * - UART4_TX is DE for RS485 transmitter + * - RS485_EN needs to be pulled high + * - RS485_HALF needs to be pulled high + */ + +#include <dt-bindings/gpio/gpio.h> + +#include "imx8mm-pinfunc.h" + +/dts-v1/; +/plugin/; + +&{/} { + compatible = "gw,imx8mm-gw72xx-0x"; +}; + +&gpio4 { + rs485_en { + gpio-hog; + gpios = <0 GPIO_ACTIVE_HIGH>; + output-high; + line-name = "rs485_en"; + }; + + rs485_hd { + gpio-hog; + gpios = <2 GPIO_ACTIVE_HIGH>; + output-high; + line-name = "rs485_hd"; + }; +}; + +&uart2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart2>; + rts-gpios = <&gpio5 29 GPIO_ACTIVE_HIGH>; + linux,rs485-enabled-at-boot-time; + status = "okay"; +}; + +&uart4 { + status = "disabled"; +}; + +&iomuxc { + pinctrl_uart2: uart2grp { + fsl,pins = < + MX8MM_IOMUXC_UART2_RXD_UART2_DCE_RX 0x140 + MX8MM_IOMUXC_UART2_TXD_UART2_DCE_TX 0x140 + MX8MM_IOMUXC_UART4_TXD_GPIO5_IO29 0x140 + >; + }; +}; diff --git a/arch/arm64/boot/dts/freescale/imx8mm-venice-gw72xx.dtsi b/arch/arm64/boot/dts/freescale/imx8mm-venice-gw72xx.dtsi index 27afa46a253a..1e7badb2a82e 100644 --- a/arch/arm64/boot/dts/freescale/imx8mm-venice-gw72xx.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8mm-venice-gw72xx.dtsi @@ -5,9 +5,11 @@ #include <dt-bindings/gpio/gpio.h> #include <dt-bindings/leds/common.h> +#include <dt-bindings/phy/phy-imx8-pcie.h> / { aliases { + ethernet1 = ð1; usb0 = &usbotg1; usb1 = &usbotg2; }; @@ -33,6 +35,12 @@ }; }; + pcie0_refclk: pcie0-refclk { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <100000000>; + }; + pps { compatible = "pps-gpio"; pinctrl-names = "default"; @@ -80,6 +88,22 @@ status = "okay"; }; +&gpio1 { + gpio-line-names = "rs485_term", "mipi_gpio4", "", "", + "", "", "pci_usb_sel", "dio0", + "", "dio1", "", "", "", "", "", "", + "", "", "", "", "", "", "", "", + "", "", "", "", "", "", "", ""; +}; + +&gpio4 { + gpio-line-names = "rs485_en", "mipi_gpio3", "rs485_hd", "mipi_gpio2", + "mipi_gpio1", "", "", "pci_wdis#", + "", "", "", "", "", "", "", "", + "", "", "", "", "", "", "", "", + "", "", "", "", "", "", "", ""; +}; + &i2c2 { clock-frequency = <400000>; pinctrl-names = "default"; @@ -106,6 +130,54 @@ status = "okay"; }; +&pcie_phy { + fsl,refclk-pad-mode = <IMX8_PCIE_REFCLK_PAD_INPUT>; + fsl,clkreq-unsupported; + clocks = <&pcie0_refclk>; + status = "okay"; +}; + +&pcie0 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pcie0>; + reset-gpio = <&gpio4 6 GPIO_ACTIVE_LOW>; + clocks = <&clk IMX8MM_CLK_PCIE1_ROOT>, <&clk IMX8MM_CLK_PCIE1_AUX>, + <&pcie0_refclk>; + clock-names = "pcie", "pcie_aux", "pcie_bus"; + assigned-clocks = <&clk IMX8MM_CLK_PCIE1_AUX>, + <&clk IMX8MM_CLK_PCIE1_CTRL>; + assigned-clock-rates = <10000000>, <250000000>; + assigned-clock-parents = <&clk IMX8MM_SYS_PLL2_50M>, + <&clk IMX8MM_SYS_PLL2_250M>; + status = "okay"; + + pcie@0,0 { + reg = <0x0000 0 0 0 0>; + #address-cells = <1>; + #size-cells = <0>; + + pcie@1,0 { + reg = <0x0000 0 0 0 0>; + #address-cells = <1>; + #size-cells = <0>; + + pcie@2,3 { + reg = <0x1800 0 0 0 0>; + #address-cells = <1>; + #size-cells = <0>; + + eth1: pcie@5,0 { + reg = <0x0000 0 0 0 0>; + #address-cells = <1>; + #size-cells = <0>; + + local-mac-address = [00 00 00 00 00 00]; + }; + }; + }; + }; +}; + /* off-board header */ &sai3 { pinctrl-names = "default"; @@ -198,6 +270,12 @@ >; }; + pinctrl_pcie0: pcie0grp { + fsl,pins = < + MX8MM_IOMUXC_SAI1_RXD4_GPIO4_IO6 0x41 + >; + }; + pinctrl_pps: ppsgrp { fsl,pins = < MX8MM_IOMUXC_GPIO1_IO15_GPIO1_IO15 0x41 diff --git a/arch/arm64/boot/dts/freescale/imx8mm-venice-gw73xx-0x-imx219.dts b/arch/arm64/boot/dts/freescale/imx8mm-venice-gw73xx-0x-imx219.dts new file mode 100644 index 000000000000..f3ece4b7fbbd --- /dev/null +++ b/arch/arm64/boot/dts/freescale/imx8mm-venice-gw73xx-0x-imx219.dts @@ -0,0 +1,93 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright 2022 Gateworks Corporation + */ + +#include <dt-bindings/gpio/gpio.h> + +#include "imx8mm-pinfunc.h" + +/dts-v1/; +/plugin/; + +&{/} { + compatible = "gw,imx8mm-gw73xx-0x", "fsl,imx8mm"; + + reg_cam: regulator-cam { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_reg_cam>; + compatible = "regulator-fixed"; + regulator-name = "reg_cam"; + gpio = <&gpio1 1 GPIO_ACTIVE_HIGH>; + enable-active-high; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + cam24m: cam24m { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <24000000>; + clock-output-names = "cam24m"; + }; +}; + +&csi { + status = "okay"; +}; + +&i2c3 { + #address-cells = <1>; + #size-cells = <0>; + + imx219: sensor@10 { + compatible = "sony,imx219"; + reg = <0x10>; + clocks = <&cam24m>; + VDIG-supply = <®_cam>; + + port { + /* MIPI CSI-2 bus endpoint */ + imx219_to_mipi_csi2: endpoint { + remote-endpoint = <&imx8mm_mipi_csi_in>; + clock-lanes = <0>; + data-lanes = <1 2>; + link-frequencies = /bits/ 64 <456000000>; + }; + }; + }; +}; + +&mipi_csi { + status = "okay"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + imx8mm_mipi_csi_in: endpoint { + remote-endpoint = <&imx219_to_mipi_csi2>; + data-lanes = <1 2>; + }; + }; + + port@1 { + reg = <1>; + + imx8mm_mipi_csi_out: endpoint { + remote-endpoint = <&csi_in>; + }; + }; + }; +}; + +&iomuxc { + pinctrl_reg_cam: regcamgrp { + fsl,pins = < + MX8MM_IOMUXC_GPIO1_IO01_GPIO1_IO1 0x41 + >; + }; +}; diff --git a/arch/arm64/boot/dts/freescale/imx8mm-venice-gw73xx-0x-rs232-rts.dts b/arch/arm64/boot/dts/freescale/imx8mm-venice-gw73xx-0x-rs232-rts.dts new file mode 100644 index 000000000000..2fa635e1c1a8 --- /dev/null +++ b/arch/arm64/boot/dts/freescale/imx8mm-venice-gw73xx-0x-rs232-rts.dts @@ -0,0 +1,53 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright 2022 Gateworks Corporation + * + * GW73xx RS232 with RTS/CTS hardware flow control: + * - GPIO4_0 rs485_en needs to be driven low (in-active) + * - UART4_TX becomes RTS + * - UART4_RX becomes CTS + */ + +#include <dt-bindings/gpio/gpio.h> + +#include "imx8mm-pinfunc.h" + +/dts-v1/; +/plugin/; + +&{/} { + compatible = "gw,imx8mm-gw73xx-0x"; +}; + +&gpio4 { + rs485_en { + gpio-hog; + gpios = <0 GPIO_ACTIVE_HIGH>; + output-low; + line-name = "rs485_en"; + }; +}; + +&uart2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart2>; + rts-gpios = <&gpio5 29 GPIO_ACTIVE_LOW>; + cts-gpios = <&gpio5 28 GPIO_ACTIVE_LOW>; + uart-has-rtscts; + status = "okay"; +}; + +&uart4 { + status = "disabled"; +}; + +&iomuxc { + pinctrl_uart2: uart2grp { + fsl,pins = < + MX8MM_IOMUXC_UART2_RXD_UART2_DCE_RX 0x140 + MX8MM_IOMUXC_UART2_TXD_UART2_DCE_TX 0x140 + MX8MM_IOMUXC_UART4_TXD_GPIO5_IO29 0x140 + MX8MM_IOMUXC_UART4_RXD_GPIO5_IO28 0x140 + >; + }; +}; diff --git a/arch/arm64/boot/dts/freescale/imx8mm-venice-gw73xx-0x-rs422.dts b/arch/arm64/boot/dts/freescale/imx8mm-venice-gw73xx-0x-rs422.dts new file mode 100644 index 000000000000..3e6404340d52 --- /dev/null +++ b/arch/arm64/boot/dts/freescale/imx8mm-venice-gw73xx-0x-rs422.dts @@ -0,0 +1,61 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright 2021 Gateworks Corporation + * + * GW73xx RS422 (RS485 full duplex): + * - GPIO1_0 rs485_term selects on-chip termination + * - GPIO4_0 rs485_en needs to be driven high (active) + * - GPIO4_2 rs485_hd needs to be driven low (in-active) + * - UART4_TX is DE for RS485 transmitter + * - RS485_EN needs to be pulled high + * - RS485_HALF needs to be low + */ + +#include <dt-bindings/gpio/gpio.h> + +#include "imx8mm-pinfunc.h" + +/dts-v1/; +/plugin/; + +&{/} { + compatible = "gw,imx8mm-gw73xx-0x"; +}; + +&gpio4 { + rs485_en { + gpio-hog; + gpios = <0 GPIO_ACTIVE_HIGH>; + output-high; + line-name = "rs485_en"; + }; + + rs485_hd { + gpio-hog; + gpios = <2 GPIO_ACTIVE_HIGH>; + output-low; + line-name = "rs485_hd"; + }; +}; + +&uart2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart2>; + rts-gpios = <&gpio5 29 GPIO_ACTIVE_HIGH>; + linux,rs485-enabled-at-boot-time; + status = "okay"; +}; + +&uart4 { + status = "disabled"; +}; + +&iomuxc { + pinctrl_uart2: uart2grp { + fsl,pins = < + MX8MM_IOMUXC_UART2_RXD_UART2_DCE_RX 0x140 + MX8MM_IOMUXC_UART2_TXD_UART2_DCE_TX 0x140 + MX8MM_IOMUXC_UART4_TXD_GPIO5_IO29 0x140 + >; + }; +}; diff --git a/arch/arm64/boot/dts/freescale/imx8mm-venice-gw73xx-0x-rs485.dts b/arch/arm64/boot/dts/freescale/imx8mm-venice-gw73xx-0x-rs485.dts new file mode 100644 index 000000000000..2c71ab9854cb --- /dev/null +++ b/arch/arm64/boot/dts/freescale/imx8mm-venice-gw73xx-0x-rs485.dts @@ -0,0 +1,61 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright 2021 Gateworks Corporation + * + * GW73xx RS485 HD: + * - GPIO1_0 rs485_term selects on-chip termination + * - GPIO4_0 rs485_en needs to be driven high (active) + * - GPIO4_2 rs485_hd needs to be driven high (active) + * - UART4_TX is DE for RS485 transmitter + * - RS485_EN needs to be pulled high + * - RS485_HALF needs to be pulled high + */ + +#include <dt-bindings/gpio/gpio.h> + +#include "imx8mm-pinfunc.h" + +/dts-v1/; +/plugin/; + +&{/} { + compatible = "gw,imx8mm-gw73xx-0x"; +}; + +&gpio4 { + rs485_en { + gpio-hog; + gpios = <0 GPIO_ACTIVE_HIGH>; + output-high; + line-name = "rs485_en"; + }; + + rs485_hd { + gpio-hog; + gpios = <2 GPIO_ACTIVE_HIGH>; + output-high; + line-name = "rs485_hd"; + }; +}; + +&uart2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart2>; + rts-gpios = <&gpio5 29 GPIO_ACTIVE_HIGH>; + linux,rs485-enabled-at-boot-time; + status = "okay"; +}; + +&uart4 { + status = "disabled"; +}; + +&iomuxc { + pinctrl_uart2: uart2grp { + fsl,pins = < + MX8MM_IOMUXC_UART2_RXD_UART2_DCE_RX 0x140 + MX8MM_IOMUXC_UART2_TXD_UART2_DCE_TX 0x140 + MX8MM_IOMUXC_UART4_TXD_GPIO5_IO29 0x140 + >; + }; +}; diff --git a/arch/arm64/boot/dts/freescale/imx8mm-venice-gw73xx.dtsi b/arch/arm64/boot/dts/freescale/imx8mm-venice-gw73xx.dtsi index a59e849c7be2..426483ec1f88 100644 --- a/arch/arm64/boot/dts/freescale/imx8mm-venice-gw73xx.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8mm-venice-gw73xx.dtsi @@ -5,9 +5,11 @@ #include <dt-bindings/gpio/gpio.h> #include <dt-bindings/leds/common.h> +#include <dt-bindings/phy/phy-imx8-pcie.h> / { aliases { + ethernet1 = ð1; usb0 = &usbotg1; usb1 = &usbotg2; }; @@ -33,6 +35,12 @@ }; }; + pcie0_refclk: pcie0-refclk { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <100000000>; + }; + pps { compatible = "pps-gpio"; pinctrl-names = "default"; @@ -100,6 +108,22 @@ status = "okay"; }; +&gpio1 { + gpio-line-names = "rs485_term", "mipi_gpio4", "", "", + "", "", "pci_usb_sel", "dio0", + "", "dio1", "", "", "", "", "", "", + "", "", "", "", "", "", "", "", + "", "", "", "", "", "", "", ""; +}; + +&gpio4 { + gpio-line-names = "rs485_en", "mipi_gpio3", "rs485_hd", "mipi_gpio2", + "mipi_gpio1", "", "", "pci_wdis#", + "", "", "", "", "", "", "", "", + "", "", "", "", "", "", "", "", + "", "", "", "", "", "", "", ""; +}; + &i2c2 { clock-frequency = <400000>; pinctrl-names = "default"; @@ -126,6 +150,54 @@ status = "okay"; }; +&pcie_phy { + fsl,refclk-pad-mode = <IMX8_PCIE_REFCLK_PAD_INPUT>; + fsl,clkreq-unsupported; + clocks = <&pcie0_refclk>; + status = "okay"; +}; + +&pcie0 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pcie0>; + reset-gpio = <&gpio4 6 GPIO_ACTIVE_LOW>; + clocks = <&clk IMX8MM_CLK_PCIE1_ROOT>, <&clk IMX8MM_CLK_PCIE1_AUX>, + <&pcie0_refclk>; + clock-names = "pcie", "pcie_aux", "pcie_bus"; + assigned-clocks = <&clk IMX8MM_CLK_PCIE1_AUX>, + <&clk IMX8MM_CLK_PCIE1_CTRL>; + assigned-clock-rates = <10000000>, <250000000>; + assigned-clock-parents = <&clk IMX8MM_SYS_PLL2_50M>, + <&clk IMX8MM_SYS_PLL2_250M>; + status = "okay"; + + pcie@0,0 { + reg = <0x0000 0 0 0 0>; + #address-cells = <1>; + #size-cells = <0>; + + pcie@1,0 { + reg = <0x0000 0 0 0 0>; + #address-cells = <1>; + #size-cells = <0>; + + pcie@2,4 { + reg = <0x2000 0 0 0 0>; + #address-cells = <1>; + #size-cells = <0>; + + eth1: pcie@6,0 { + reg = <0x0000 0 0 0 0>; + #address-cells = <1>; + #size-cells = <0>; + + local-mac-address = [00 00 00 00 00 00]; + }; + }; + }; + }; +}; + /* off-board header */ &sai3 { pinctrl-names = "default"; @@ -241,6 +313,12 @@ >; }; + pinctrl_pcie0: pcie0grp { + fsl,pins = < + MX8MM_IOMUXC_SAI1_RXD4_GPIO4_IO6 0x41 + >; + }; + pinctrl_pps: ppsgrp { fsl,pins = < MX8MM_IOMUXC_GPIO1_IO15_GPIO1_IO15 0x41 diff --git a/arch/arm64/boot/dts/freescale/imx8mm-venice-gw7901.dts b/arch/arm64/boot/dts/freescale/imx8mm-venice-gw7901.dts index 21c546c4628d..7e7231046215 100644 --- a/arch/arm64/boot/dts/freescale/imx8mm-venice-gw7901.dts +++ b/arch/arm64/boot/dts/freescale/imx8mm-venice-gw7901.dts @@ -8,6 +8,7 @@ #include <dt-bindings/gpio/gpio.h> #include <dt-bindings/input/linux-event-codes.h> #include <dt-bindings/leds/common.h> +#include <dt-bindings/phy/phy-imx8-pcie.h> #include "imx8mm.dtsi" @@ -179,6 +180,12 @@ }; }; + pcie0_refclk: pcie0-refclk { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <100000000>; + }; + reg_3p3v: regulator-3p3v { compatible = "regulator-fixed"; regulator-name = "3P3V"; @@ -286,6 +293,29 @@ }; }; +&gpio1 { + gpio-line-names = "uart1_rs422#", "", "", "uart1_rs485#", + "", "uart1_rs232#", "dig1_in", "dig1_out", + "", "", "", "", "", "", "", "", + "", "", "", "", "", "", "", "", + "", "", "", "", "", "", "", ""; +}; + +&gpio4 { + gpio-line-names = "", "", "", "", + "", "", "uart3_rs232#", "uart3_rs422#", + "uart3_rs485#", "", "", "", "", "", "", "", + "", "", "", "", "", "", "", "", + "", "", "", "uart4_rs485#", "", "sim1det#", "sim2det#", ""; +}; + +&gpio5 { + gpio-line-names = "", "", "", "dig2_out", "dig2_in", "sim2sel", "", "", + "", "", "uart4_rs232#", "", "", "uart4_rs422#", "", "", + "", "", "", "", "", "", "", "", + "", "", "", "", "", "", "", ""; +}; + &gpu_2d { status = "disabled"; }; @@ -644,6 +674,28 @@ status = "okay"; }; +&pcie_phy { + fsl,refclk-pad-mode = <IMX8_PCIE_REFCLK_PAD_INPUT>; + fsl,clkreq-unsupported; + clocks = <&pcie0_refclk>; + status = "okay"; +}; + +&pcie0 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pcie0>; + reset-gpio = <&gpio5 2 GPIO_ACTIVE_LOW>; + clocks = <&clk IMX8MM_CLK_PCIE1_ROOT>, <&clk IMX8MM_CLK_PCIE1_AUX>, + <&pcie0_refclk>; + clock-names = "pcie", "pcie_aux", "pcie_bus"; + assigned-clocks = <&clk IMX8MM_CLK_PCIE1_AUX>, + <&clk IMX8MM_CLK_PCIE1_CTRL>; + assigned-clock-rates = <10000000>, <250000000>; + assigned-clock-parents = <&clk IMX8MM_SYS_PLL2_50M>, + <&clk IMX8MM_SYS_PLL2_250M>; + status = "okay"; +}; + &pgc_gpu { status = "disabled"; }; @@ -820,6 +872,13 @@ >; }; + pinctrl_pcie0: pciegrp { + fsl,pins = < + MX8MM_IOMUXC_SAI3_TXFS_GPIO4_IO31 0x40000041 /* WDIS# */ + MX8MM_IOMUXC_SAI3_MCLK_GPIO5_IO2 0x41 + >; + }; + pinctrl_pmic: pmicgrp { fsl,pins = < MX8MM_IOMUXC_SAI5_RXC_GPIO3_IO20 0x41 diff --git a/arch/arm64/boot/dts/freescale/imx8mm-venice-gw7902.dts b/arch/arm64/boot/dts/freescale/imx8mm-venice-gw7902.dts index d52686f4c059..edf0c7aaaef0 100644 --- a/arch/arm64/boot/dts/freescale/imx8mm-venice-gw7902.dts +++ b/arch/arm64/boot/dts/freescale/imx8mm-venice-gw7902.dts @@ -9,6 +9,7 @@ #include <dt-bindings/input/linux-event-codes.h> #include <dt-bindings/leds/common.h> #include <dt-bindings/net/ti-dp83867.h> +#include <dt-bindings/phy/phy-imx8-pcie.h> #include "imx8mm.dtsi" @@ -17,6 +18,7 @@ compatible = "gw,imx8mm-gw7902", "fsl,imx8mm"; aliases { + ethernet1 = ð1; usb0 = &usbotg1; usb1 = &usbotg2; }; @@ -128,6 +130,12 @@ }; }; + pcie0_refclk: pcie0-refclk { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <100000000>; + }; + pps { compatible = "pps-gpio"; pinctrl-names = "default"; @@ -252,6 +260,43 @@ }; }; +&gpio1 { + gpio-line-names = "", "", "", "", "", "", "", "", + "", "", "", "", "", "m2_reset", "", "m2_wdis#", + "", "", "", "", "", "", "", "", + "", "", "", "", "", "", "", ""; +}; + +&gpio2 { + gpio-line-names = "", "", "", "", "", "", "", "", + "uart2_en#", "", "", "", "", "", "", "", + "", "", "", "", "", "", "", "", + "", "", "", "", "", "", "", ""; +}; + +&gpio3 { + gpio-line-names = "", "m2_gdis#", "", "", "", "", "", "m2_off#", + "", "", "", "", "", "", "", "", + "", "", "", "", "", "", "", "", + "", "", "", "", "", "", "", ""; +}; + +&gpio4 { + gpio-line-names = "", "", "", "", "", "", "", "", + "", "", "", "amp_gpio3", "amp_gpio2", "", "amp_gpio1", "", + "", "", "", "", "amp_gpio4", "app_gpio1", "", "uart1_rs485", + "", "uart1_term", "uart1_half", "app_gpio2", + "mipi_gpio1", "", "", ""; +}; + +&gpio5 { + gpio-line-names = "", "", "", "mipi_gpio4", + "mipi_gpio3", "mipi_gpio2", "", "", + "", "", "", "", "", "", "", "", + "", "", "", "", "", "", "", "", + "", "", "", "", "", "", "", ""; +}; + &i2c1 { clock-frequency = <100000>; pinctrl-names = "default"; @@ -547,6 +592,42 @@ status = "okay"; }; +&pcie_phy { + fsl,refclk-pad-mode = <IMX8_PCIE_REFCLK_PAD_INPUT>; + fsl,clkreq-unsupported; + clocks = <&clk IMX8MM_CLK_DUMMY>; + status = "okay"; +}; + +&pcie0 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pcie0>; + reset-gpio = <&gpio4 5 GPIO_ACTIVE_LOW>; + clocks = <&clk IMX8MM_CLK_PCIE1_ROOT>, <&clk IMX8MM_CLK_PCIE1_AUX>, + <&clk IMX8MM_CLK_DUMMY>, <&pcie0_refclk>; + clock-names = "pcie", "pcie_aux", "pcie_phy", "pcie_bus"; + assigned-clocks = <&clk IMX8MM_CLK_PCIE1_AUX>, + <&clk IMX8MM_CLK_PCIE1_CTRL>; + assigned-clock-rates = <10000000>, <250000000>; + assigned-clock-parents = <&clk IMX8MM_SYS_PLL2_50M>, + <&clk IMX8MM_SYS_PLL2_250M>; + status = "okay"; + + pcie@0,0 { + reg = <0x0000 0 0 0 0>; + #address-cells = <1>; + #size-cells = <0>; + + eth1: pcie@1,0 { + reg = <0x0000 0 0 0 0>; + #address-cells = <1>; + #size-cells = <0>; + + local-mac-address = [00 00 00 00 00 00]; + }; + }; +}; + /* off-board header */ &sai3 { pinctrl-names = "default"; @@ -647,7 +728,7 @@ pinctrl_hog: hoggrp { fsl,pins = < MX8MM_IOMUXC_NAND_CE0_B_GPIO3_IO1 0x40000159 /* M2_GDIS# */ - MX8MM_IOMUXC_GPIO1_IO13_GPIO1_IO13 0x40000041 /* M2_RST# */ + MX8MM_IOMUXC_GPIO1_IO13_GPIO1_IO13 0x40000041 /* M2_RESET */ MX8MM_IOMUXC_NAND_DATA01_GPIO3_IO7 0x40000119 /* M2_OFF# */ MX8MM_IOMUXC_GPIO1_IO15_GPIO1_IO15 0x40000159 /* M2_WDIS# */ MX8MM_IOMUXC_SAI1_TXD2_GPIO4_IO14 0x40000041 /* AMP GPIO1 */ @@ -737,6 +818,12 @@ >; }; + pinctrl_pcie0: pciegrp { + fsl,pins = < + MX8MM_IOMUXC_SAI1_RXD3_GPIO4_IO5 0x41 + >; + }; + pinctrl_pmic: pmicgrp { fsl,pins = < MX8MM_IOMUXC_NAND_DATA02_GPIO3_IO8 0x41 diff --git a/arch/arm64/boot/dts/freescale/imx8mm-venice-gw7903.dts b/arch/arm64/boot/dts/freescale/imx8mm-venice-gw7903.dts new file mode 100644 index 000000000000..1deb2ea8fcc9 --- /dev/null +++ b/arch/arm64/boot/dts/freescale/imx8mm-venice-gw7903.dts @@ -0,0 +1,836 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright 2022 Gateworks Corporation + */ + +/dts-v1/; + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/linux-event-codes.h> +#include <dt-bindings/leds/common.h> +#include <dt-bindings/phy/phy-imx8-pcie.h> + +#include "imx8mm.dtsi" + +/ { + model = "Gateworks Venice GW7903 i.MX8MM board"; + compatible = "gw,imx8mm-gw7903", "fsl,imx8mm"; + + aliases { + ethernet0 = &fec1; + usb0 = &usbotg1; + }; + + chosen { + stdout-path = &uart2; + }; + + memory@40000000 { + device_type = "memory"; + reg = <0x0 0x40000000 0 0x80000000>; + }; + + gpio-keys { + compatible = "gpio-keys"; + + user-pb { + label = "user_pb"; + gpios = <&gpio 2 GPIO_ACTIVE_LOW>; + linux,code = <BTN_0>; + }; + + user-pb1x { + label = "user_pb1x"; + linux,code = <BTN_1>; + interrupt-parent = <&gsc>; + interrupts = <0>; + }; + + key-erased { + label = "key_erased"; + linux,code = <BTN_2>; + interrupt-parent = <&gsc>; + interrupts = <1>; + }; + + eeprom-wp { + label = "eeprom_wp"; + linux,code = <BTN_3>; + interrupt-parent = <&gsc>; + interrupts = <2>; + }; + + switch-hold { + label = "switch_hold"; + linux,code = <BTN_5>; + interrupt-parent = <&gsc>; + interrupts = <7>; + }; + }; + + led-controller { + compatible = "gpio-leds"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_gpio_leds>; + + led-0 { + function = LED_FUNCTION_STATUS; + color = <LED_COLOR_ID_RED>; + label = "led01_red"; + gpios = <&gpio5 5 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + + led-1 { + function = LED_FUNCTION_STATUS; + color = <LED_COLOR_ID_GREEN>; + label = "led01_grn"; + gpios = <&gpio4 30 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + + led-2 { + function = LED_FUNCTION_STATUS; + color = <LED_COLOR_ID_RED>; + label = "led02_red"; + gpios = <&gpio5 2 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + + led-3 { + function = LED_FUNCTION_STATUS; + color = <LED_COLOR_ID_GREEN>; + label = "led02_grn"; + gpios = <&gpio1 14 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + + led-4 { + function = LED_FUNCTION_STATUS; + color = <LED_COLOR_ID_RED>; + label = "led03_red"; + gpios = <&gpio1 9 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + + led-5 { + function = LED_FUNCTION_STATUS; + color = <LED_COLOR_ID_GREEN>; + label = "led03_grn"; + gpios = <&gpio5 3 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + + led-6 { + function = LED_FUNCTION_STATUS; + color = <LED_COLOR_ID_RED>; + label = "led04_red"; + gpios = <&gpio4 29 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + + led-7 { + function = LED_FUNCTION_STATUS; + color = <LED_COLOR_ID_GREEN>; + label = "led04_grn"; + gpios = <&gpio4 28 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + + led-8 { + function = LED_FUNCTION_STATUS; + color = <LED_COLOR_ID_RED>; + label = "led05_red"; + gpios = <&gpio1 13 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + + led-9 { + function = LED_FUNCTION_STATUS; + color = <LED_COLOR_ID_GREEN>; + label = "led05_grn"; + gpios = <&gpio4 31 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + + led-a { + function = LED_FUNCTION_STATUS; + color = <LED_COLOR_ID_RED>; + label = "led06_red"; + gpios = <&gpio5 4 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + + led-b { + function = LED_FUNCTION_STATUS; + color = <LED_COLOR_ID_GREEN>; + label = "led06_grn"; + gpios = <&gpio1 8 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + }; + + pcie0_refclk: pcie0-refclk { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <100000000>; + }; + + reg_3p3v: regulator-3p3v { + compatible = "regulator-fixed"; + regulator-name = "3P3V"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; +}; + +&A53_0 { + cpu-supply = <&buck2>; +}; + +&A53_1 { + cpu-supply = <&buck2>; +}; + +&A53_2 { + cpu-supply = <&buck2>; +}; + +&A53_3 { + cpu-supply = <&buck2>; +}; + +&ddrc { + operating-points-v2 = <&ddrc_opp_table>; + + ddrc_opp_table: opp-table { + compatible = "operating-points-v2"; + + opp-25M { + opp-hz = /bits/ 64 <25000000>; + }; + + opp-100M { + opp-hz = /bits/ 64 <100000000>; + }; + + opp-750M { + opp-hz = /bits/ 64 <750000000>; + }; + }; +}; + +&fec1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_fec1>; + phy-mode = "rgmii-id"; + phy-handle = <ðphy0>; + local-mac-address = [00 00 00 00 00 00]; + status = "okay"; + + mdio { + #address-cells = <1>; + #size-cells = <0>; + + ethphy0: ethernet-phy@0 { + compatible = "ethernet-phy-ieee802.3-c22"; + reg = <0>; + rx-internal-delay-ps = <2000>; + tx-internal-delay-ps = <2500>; + }; + }; +}; + +&gpio1 { + gpio-line-names = "", "", "", "", "", "", "", "", + "", "", "rs422_en#", "rs485_en#", "rs232_en#", "", "", "", + "", "", "", "", "", "", "", "", + "", "", "", "", "", "", "", ""; +}; + +&gpio2 { + gpio-line-names = "dig2_in", "dig2_out#", "", "", "", "", "", "", + "dig1_out#", "dig1_in", "", "", "", "", "", "", + "", "", "", "", "", "", "", "", + "", "", "", "", "", "", "", ""; +}; + +&gpio5 { + gpio-line-names = "", "", "", "", "", "", "", "sim1_det#", + "sim2_det#", "sim2_sel", "", "", "pci_wdis#", "", "", "", + "", "", "", "", "", "", "", "", + "", "", "", "", "", "", "", ""; +}; + +&i2c1 { + clock-frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c1>; + status = "okay"; + + gsc: gsc@20 { + compatible = "gw,gsc"; + reg = <0x20>; + pinctrl-0 = <&pinctrl_gsc>; + interrupt-parent = <&gpio4>; + interrupts = <26 IRQ_TYPE_EDGE_FALLING>; + interrupt-controller; + #interrupt-cells = <1>; + + adc { + compatible = "gw,gsc-adc"; + #address-cells = <1>; + #size-cells = <0>; + + channel@6 { + gw,mode = <0>; + reg = <0x06>; + label = "temp"; + }; + + channel@8 { + gw,mode = <1>; + reg = <0x08>; + label = "vdd_bat"; + }; + + channel@82 { + gw,mode = <2>; + reg = <0x82>; + label = "vin"; + gw,voltage-divider-ohms = <22100 1000>; + gw,voltage-offset-microvolt = <700000>; + }; + + channel@84 { + gw,mode = <2>; + reg = <0x84>; + label = "vdd_5p0"; + gw,voltage-divider-ohms = <10000 10000>; + }; + + channel@86 { + gw,mode = <2>; + reg = <0x86>; + label = "vdd_3p3"; + gw,voltage-divider-ohms = <10000 10000>; + }; + + channel@88 { + gw,mode = <2>; + reg = <0x88>; + label = "vdd_0p9"; + }; + + channel@8c { + gw,mode = <2>; + reg = <0x8c>; + label = "vdd_soc"; + }; + + channel@8e { + gw,mode = <2>; + reg = <0x8e>; + label = "vdd_arm"; + }; + + channel@90 { + gw,mode = <2>; + reg = <0x90>; + label = "vdd_1p8"; + }; + + channel@92 { + gw,mode = <2>; + reg = <0x92>; + label = "vdd_dram"; + }; + + channel@a2 { + gw,mode = <2>; + reg = <0xa2>; + label = "vdd_gsc"; + gw,voltage-divider-ohms = <10000 10000>; + }; + }; + }; + + gpio: gpio@23 { + compatible = "nxp,pca9555"; + reg = <0x23>; + gpio-controller; + #gpio-cells = <2>; + interrupt-parent = <&gsc>; + interrupts = <4>; + }; + + eeprom@50 { + compatible = "atmel,24c02"; + reg = <0x50>; + pagesize = <16>; + }; + + eeprom@51 { + compatible = "atmel,24c02"; + reg = <0x51>; + pagesize = <16>; + }; + + eeprom@52 { + compatible = "atmel,24c02"; + reg = <0x52>; + pagesize = <16>; + }; + + eeprom@53 { + compatible = "atmel,24c02"; + reg = <0x53>; + pagesize = <16>; + }; + + rtc@68 { + compatible = "dallas,ds1672"; + reg = <0x68>; + }; +}; + +&i2c2 { + clock-frequency = <400000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c2>; + status = "okay"; + + pmic@4b { + compatible = "rohm,bd71847"; + reg = <0x4b>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pmic>; + interrupt-parent = <&gpio3>; + interrupts = <8 IRQ_TYPE_LEVEL_LOW>; + rohm,reset-snvs-powered; + #clock-cells = <0>; + clocks = <&osc_32k 0>; + clock-output-names = "clk-32k-out"; + + regulators { + /* vdd_soc: 0.805-0.900V (typ=0.8V) */ + BUCK1 { + regulator-name = "buck1"; + regulator-min-microvolt = <700000>; + regulator-max-microvolt = <1300000>; + regulator-boot-on; + regulator-always-on; + regulator-ramp-delay = <1250>; + }; + + /* vdd_arm: 0.805-1.0V (typ=0.9V) */ + buck2: BUCK2 { + regulator-name = "buck2"; + regulator-min-microvolt = <700000>; + regulator-max-microvolt = <1300000>; + regulator-boot-on; + regulator-always-on; + regulator-ramp-delay = <1250>; + rohm,dvs-run-voltage = <1000000>; + rohm,dvs-idle-voltage = <900000>; + }; + + /* vdd_0p9: 0.805-1.0V (typ=0.9V) */ + BUCK3 { + regulator-name = "buck3"; + regulator-min-microvolt = <700000>; + regulator-max-microvolt = <1350000>; + regulator-boot-on; + regulator-always-on; + }; + + /* vdd_3p3 */ + BUCK4 { + regulator-name = "buck4"; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + regulator-always-on; + }; + + /* vdd_1p8 */ + BUCK5 { + regulator-name = "buck5"; + regulator-min-microvolt = <1605000>; + regulator-max-microvolt = <1995000>; + regulator-boot-on; + regulator-always-on; + }; + + /* vdd_dram */ + BUCK6 { + regulator-name = "buck6"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <1400000>; + regulator-boot-on; + regulator-always-on; + }; + + /* nvcc_snvs_1p8 */ + LDO1 { + regulator-name = "ldo1"; + regulator-min-microvolt = <1600000>; + regulator-max-microvolt = <1900000>; + regulator-boot-on; + regulator-always-on; + }; + + /* vdd_snvs_0p8 */ + LDO2 { + regulator-name = "ldo2"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <900000>; + regulator-boot-on; + regulator-always-on; + }; + + /* vdda_1p8 */ + LDO3 { + regulator-name = "ldo3"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + regulator-always-on; + }; + + LDO4 { + regulator-name = "ldo4"; + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <1800000>; + regulator-boot-on; + regulator-always-on; + }; + + LDO6 { + regulator-name = "ldo6"; + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <1800000>; + regulator-boot-on; + regulator-always-on; + }; + }; + }; +}; + +&i2c3 { + clock-frequency = <400000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c3>; + status = "okay"; + + accelerometer@19 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_accel>; + compatible = "st,lis2de12"; + reg = <0x19>; + st,drdy-int-pin = <1>; + interrupt-parent = <&gpio1>; + interrupts = <15 IRQ_TYPE_LEVEL_LOW>; + interrupt-names = "INT1"; + }; +}; + +&pcie_phy { + fsl,refclk-pad-mode = <IMX8_PCIE_REFCLK_PAD_INPUT>; + fsl,clkreq-unsupported; + clocks = <&pcie0_refclk>; + status = "okay"; +}; + +&pcie0 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pcie0>; + reset-gpio = <&gpio5 11 GPIO_ACTIVE_LOW>; + clocks = <&clk IMX8MM_CLK_PCIE1_ROOT>, <&clk IMX8MM_CLK_PCIE1_AUX>, + <&pcie0_refclk>; + clock-names = "pcie", "pcie_aux", "pcie_bus"; + assigned-clocks = <&clk IMX8MM_CLK_PCIE1_AUX>, + <&clk IMX8MM_CLK_PCIE1_CTRL>; + assigned-clock-rates = <10000000>, <250000000>; + assigned-clock-parents = <&clk IMX8MM_SYS_PLL2_50M>, + <&clk IMX8MM_SYS_PLL2_250M>; + status = "okay"; +}; + +&pgc_mipi { + status = "disabled"; +}; + +/* off-board RS232/RS485/RS422 */ +&uart1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart1>; + cts-gpios = <&gpio1 3 GPIO_ACTIVE_LOW>; + rts-gpios = <&gpio1 5 GPIO_ACTIVE_LOW>; + dtr-gpios = <&gpio1 0 GPIO_ACTIVE_LOW>; + dsr-gpios = <&gpio1 1 GPIO_ACTIVE_LOW>; + dcd-gpios = <&gpio3 24 GPIO_ACTIVE_LOW>; + uart-has-rtscts; + status = "okay"; +}; + +/* console */ +&uart2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart2>; + status = "okay"; +}; + +&usbotg1 { + dr_mode = "host"; + disable-over-current; + status = "okay"; +}; + +/* microSD */ +&usdhc2 { + pinctrl-names = "default", "state_100mhz", "state_200mhz"; + pinctrl-0 = <&pinctrl_usdhc2>, <&pinctrl_usdhc2_gpio>; + pinctrl-1 = <&pinctrl_usdhc2_100mhz>, <&pinctrl_usdhc2_gpio>; + pinctrl-2 = <&pinctrl_usdhc2_200mhz>, <&pinctrl_usdhc2_gpio>; + cd-gpios = <&gpio2 12 GPIO_ACTIVE_LOW>; + bus-width = <4>; + vmmc-supply = <®_3p3v>; + status = "okay"; +}; + +/* eMMC */ +&usdhc3 { + pinctrl-names = "default", "state_100mhz", "state_200mhz"; + pinctrl-0 = <&pinctrl_usdhc3>; + pinctrl-1 = <&pinctrl_usdhc3_100mhz>; + pinctrl-2 = <&pinctrl_usdhc3_200mhz>; + bus-width = <8>; + non-removable; + status = "okay"; +}; + +&wdog1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_wdog>; + fsl,ext-reset-output; + status = "okay"; +}; + +&iomuxc { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_hog>; + + pinctrl_hog: hoggrp { + fsl,pins = < + MX8MM_IOMUXC_GPIO1_IO10_GPIO1_IO10 0x40000041 /* RS422# */ + MX8MM_IOMUXC_GPIO1_IO11_GPIO1_IO11 0x40000041 /* RS485# */ + MX8MM_IOMUXC_GPIO1_IO12_GPIO1_IO12 0x40000041 /* RS232# */ + MX8MM_IOMUXC_SD1_DATA7_GPIO2_IO9 0x40000041 /* DIG1_IN */ + MX8MM_IOMUXC_SD1_DATA6_GPIO2_IO8 0x40000041 /* DIG1_OUT */ + MX8MM_IOMUXC_SD1_CLK_GPIO2_IO0 0x40000041 /* DIG2_IN */ + MX8MM_IOMUXC_SD1_CMD_GPIO2_IO1 0x40000041 /* DIG2_OUT */ + MX8MM_IOMUXC_ECSPI1_MOSI_GPIO5_IO7 0x40000041 /* SIM1DET# */ + MX8MM_IOMUXC_ECSPI1_MISO_GPIO5_IO8 0x40000041 /* SIM2DET# */ + MX8MM_IOMUXC_ECSPI1_SS0_GPIO5_IO9 0x40000041 /* SIM2SEL */ + MX8MM_IOMUXC_ECSPI2_MISO_GPIO5_IO12 0x40000041 /* PCI_WDIS# */ + >; + }; + + pinctrl_accel: accelgrp { + fsl,pins = < + MX8MM_IOMUXC_GPIO1_IO15_GPIO1_IO15 0x159 + >; + }; + + pinctrl_fec1: fec1grp { + fsl,pins = < + MX8MM_IOMUXC_ENET_MDC_ENET1_MDC 0x3 + MX8MM_IOMUXC_ENET_MDIO_ENET1_MDIO 0x3 + MX8MM_IOMUXC_ENET_TD3_ENET1_RGMII_TD3 0x1f + MX8MM_IOMUXC_ENET_TD2_ENET1_RGMII_TD2 0x1f + MX8MM_IOMUXC_ENET_TD1_ENET1_RGMII_TD1 0x1f + MX8MM_IOMUXC_ENET_TD0_ENET1_RGMII_TD0 0x1f + MX8MM_IOMUXC_ENET_RD3_ENET1_RGMII_RD3 0x91 + MX8MM_IOMUXC_ENET_RD2_ENET1_RGMII_RD2 0x91 + MX8MM_IOMUXC_ENET_RD1_ENET1_RGMII_RD1 0x91 + MX8MM_IOMUXC_ENET_RD0_ENET1_RGMII_RD0 0x91 + MX8MM_IOMUXC_ENET_TXC_ENET1_RGMII_TXC 0x1f + MX8MM_IOMUXC_ENET_RXC_ENET1_RGMII_RXC 0x91 + MX8MM_IOMUXC_ENET_RX_CTL_ENET1_RGMII_RX_CTL 0x91 + MX8MM_IOMUXC_ENET_TX_CTL_ENET1_RGMII_TX_CTL 0x1f + MX8MM_IOMUXC_SAI2_TXFS_GPIO4_IO24 0x19 /* IRQ# */ + MX8MM_IOMUXC_SAI2_TXC_GPIO4_IO25 0x19 /* RST# */ + >; + }; + + pinctrl_gsc: gscgrp { + fsl,pins = < + MX8MM_IOMUXC_SAI2_TXD0_GPIO4_IO26 0x159 + >; + }; + + pinctrl_i2c1: i2c1grp { + fsl,pins = < + MX8MM_IOMUXC_I2C1_SCL_I2C1_SCL 0x400001c3 + MX8MM_IOMUXC_I2C1_SDA_I2C1_SDA 0x400001c3 + >; + }; + + pinctrl_i2c2: i2c2grp { + fsl,pins = < + MX8MM_IOMUXC_I2C2_SCL_I2C2_SCL 0x400001c3 + MX8MM_IOMUXC_I2C2_SDA_I2C2_SDA 0x400001c3 + >; + }; + + pinctrl_i2c3: i2c3grp { + fsl,pins = < + MX8MM_IOMUXC_I2C3_SCL_I2C3_SCL 0x400001c3 + MX8MM_IOMUXC_I2C3_SDA_I2C3_SDA 0x400001c3 + >; + }; + + pinctrl_gpio_leds: gpioledgrp { + fsl,pins = < + MX8MM_IOMUXC_SPDIF_EXT_CLK_GPIO5_IO5 0x19 + MX8MM_IOMUXC_SAI3_RXD_GPIO4_IO30 0x19 + MX8MM_IOMUXC_SAI3_MCLK_GPIO5_IO2 0x19 + MX8MM_IOMUXC_GPIO1_IO14_GPIO1_IO14 0x19 + MX8MM_IOMUXC_GPIO1_IO09_GPIO1_IO9 0x19 + MX8MM_IOMUXC_SPDIF_TX_GPIO5_IO3 0x19 + MX8MM_IOMUXC_SAI3_RXC_GPIO4_IO29 0x19 + MX8MM_IOMUXC_SAI3_RXFS_GPIO4_IO28 0x19 + MX8MM_IOMUXC_GPIO1_IO13_GPIO1_IO13 0x19 + MX8MM_IOMUXC_SAI3_TXFS_GPIO4_IO31 0x19 + MX8MM_IOMUXC_SPDIF_RX_GPIO5_IO4 0x19 + MX8MM_IOMUXC_GPIO1_IO08_GPIO1_IO8 0x19 + >; + }; + + pinctrl_pcie0: pciegrp { + fsl,pins = < + MX8MM_IOMUXC_ECSPI2_MOSI_GPIO5_IO11 0x41 + >; + }; + + pinctrl_pmic: pmicgrp { + fsl,pins = < + MX8MM_IOMUXC_NAND_DATA02_GPIO3_IO8 0x41 + >; + }; + + pinctrl_uart1: uart1grp { + fsl,pins = < + MX8MM_IOMUXC_UART1_RXD_UART1_DCE_RX 0x140 + MX8MM_IOMUXC_UART1_TXD_UART1_DCE_TX 0x140 + MX8MM_IOMUXC_GPIO1_IO00_GPIO1_IO0 0x140 + MX8MM_IOMUXC_GPIO1_IO01_GPIO1_IO1 0x140 + MX8MM_IOMUXC_GPIO1_IO03_GPIO1_IO3 0x140 + MX8MM_IOMUXC_GPIO1_IO05_GPIO1_IO5 0x140 + MX8MM_IOMUXC_SAI5_RXD3_GPIO3_IO24 0x140 + >; + }; + + pinctrl_uart2: uart2grp { + fsl,pins = < + MX8MM_IOMUXC_UART2_RXD_UART2_DCE_RX 0x140 + MX8MM_IOMUXC_UART2_TXD_UART2_DCE_TX 0x140 + >; + }; + + pinctrl_usdhc2: usdhc2grp { + fsl,pins = < + MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK 0x190 + MX8MM_IOMUXC_SD2_CMD_USDHC2_CMD 0x1d0 + MX8MM_IOMUXC_SD2_DATA0_USDHC2_DATA0 0x1d0 + MX8MM_IOMUXC_SD2_DATA1_USDHC2_DATA1 0x1d0 + MX8MM_IOMUXC_SD2_DATA2_USDHC2_DATA2 0x1d0 + MX8MM_IOMUXC_SD2_DATA3_USDHC2_DATA3 0x1d0 + >; + }; + + pinctrl_usdhc2_100mhz: usdhc2-100mhzgrp { + fsl,pins = < + MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK 0x194 + MX8MM_IOMUXC_SD2_CMD_USDHC2_CMD 0x1d4 + MX8MM_IOMUXC_SD2_DATA0_USDHC2_DATA0 0x1d4 + MX8MM_IOMUXC_SD2_DATA1_USDHC2_DATA1 0x1d4 + MX8MM_IOMUXC_SD2_DATA2_USDHC2_DATA2 0x1d4 + MX8MM_IOMUXC_SD2_DATA3_USDHC2_DATA3 0x1d4 + >; + }; + + pinctrl_usdhc2_200mhz: usdhc2-200mhzgrp { + fsl,pins = < + MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK 0x196 + MX8MM_IOMUXC_SD2_CMD_USDHC2_CMD 0x1d6 + MX8MM_IOMUXC_SD2_DATA0_USDHC2_DATA0 0x1d6 + MX8MM_IOMUXC_SD2_DATA1_USDHC2_DATA1 0x1d6 + MX8MM_IOMUXC_SD2_DATA2_USDHC2_DATA2 0x1d6 + MX8MM_IOMUXC_SD2_DATA3_USDHC2_DATA3 0x1d6 + >; + }; + + pinctrl_usdhc2_gpio: usdhc2-gpiogrp { + fsl,pins = < + MX8MM_IOMUXC_SD2_CD_B_GPIO2_IO12 0x1c4 + MX8MM_IOMUXC_GPIO1_IO04_USDHC2_VSELECT 0x1d0 + >; + }; + + pinctrl_usdhc3: usdhc3grp { + fsl,pins = < + MX8MM_IOMUXC_NAND_WE_B_USDHC3_CLK 0x190 + MX8MM_IOMUXC_NAND_WP_B_USDHC3_CMD 0x1d0 + MX8MM_IOMUXC_NAND_DATA04_USDHC3_DATA0 0x1d0 + MX8MM_IOMUXC_NAND_DATA05_USDHC3_DATA1 0x1d0 + MX8MM_IOMUXC_NAND_DATA06_USDHC3_DATA2 0x1d0 + MX8MM_IOMUXC_NAND_DATA07_USDHC3_DATA3 0x1d0 + MX8MM_IOMUXC_NAND_RE_B_USDHC3_DATA4 0x1d0 + MX8MM_IOMUXC_NAND_CE2_B_USDHC3_DATA5 0x1d0 + MX8MM_IOMUXC_NAND_CE3_B_USDHC3_DATA6 0x1d0 + MX8MM_IOMUXC_NAND_CLE_USDHC3_DATA7 0x1d0 + MX8MM_IOMUXC_NAND_CE1_B_USDHC3_STROBE 0x190 + >; + }; + + pinctrl_usdhc3_100mhz: usdhc3-100mhzgrp { + fsl,pins = < + MX8MM_IOMUXC_NAND_WE_B_USDHC3_CLK 0x194 + MX8MM_IOMUXC_NAND_WP_B_USDHC3_CMD 0x1d4 + MX8MM_IOMUXC_NAND_DATA04_USDHC3_DATA0 0x1d4 + MX8MM_IOMUXC_NAND_DATA05_USDHC3_DATA1 0x1d4 + MX8MM_IOMUXC_NAND_DATA06_USDHC3_DATA2 0x1d4 + MX8MM_IOMUXC_NAND_DATA07_USDHC3_DATA3 0x1d4 + MX8MM_IOMUXC_NAND_RE_B_USDHC3_DATA4 0x1d4 + MX8MM_IOMUXC_NAND_CE2_B_USDHC3_DATA5 0x1d4 + MX8MM_IOMUXC_NAND_CE3_B_USDHC3_DATA6 0x1d4 + MX8MM_IOMUXC_NAND_CLE_USDHC3_DATA7 0x1d4 + MX8MM_IOMUXC_NAND_CE1_B_USDHC3_STROBE 0x194 + >; + }; + + pinctrl_usdhc3_200mhz: usdhc3-200mhzgrp { + fsl,pins = < + MX8MM_IOMUXC_NAND_WE_B_USDHC3_CLK 0x196 + MX8MM_IOMUXC_NAND_WP_B_USDHC3_CMD 0x1d6 + MX8MM_IOMUXC_NAND_DATA04_USDHC3_DATA0 0x1d6 + MX8MM_IOMUXC_NAND_DATA05_USDHC3_DATA1 0x1d6 + MX8MM_IOMUXC_NAND_DATA06_USDHC3_DATA2 0x1d6 + MX8MM_IOMUXC_NAND_DATA07_USDHC3_DATA3 0x1d6 + MX8MM_IOMUXC_NAND_RE_B_USDHC3_DATA4 0x1d6 + MX8MM_IOMUXC_NAND_CE2_B_USDHC3_DATA5 0x1d6 + MX8MM_IOMUXC_NAND_CE3_B_USDHC3_DATA6 0x1d6 + MX8MM_IOMUXC_NAND_CLE_USDHC3_DATA7 0x1d6 + MX8MM_IOMUXC_NAND_CE1_B_USDHC3_STROBE 0x196 + >; + }; + + pinctrl_wdog: wdoggrp { + fsl,pins = < + MX8MM_IOMUXC_GPIO1_IO02_WDOG1_WDOG_B 0xc6 + >; + }; +}; diff --git a/arch/arm64/boot/dts/freescale/imx8mm-verdin-dahlia.dtsi b/arch/arm64/boot/dts/freescale/imx8mm-verdin-dahlia.dtsi new file mode 100644 index 000000000000..aca5ae0d307d --- /dev/null +++ b/arch/arm64/boot/dts/freescale/imx8mm-verdin-dahlia.dtsi @@ -0,0 +1,150 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT +/* + * Copyright 2022 Toradex + */ + +/ { + sound_card: sound-card { + compatible = "simple-audio-card"; + simple-audio-card,bitclock-master = <&dailink_master>; + simple-audio-card,format = "i2s"; + simple-audio-card,frame-master = <&dailink_master>; + simple-audio-card,name = "imx8mm-wm8904"; + simple-audio-card,routing = + "Headphone Jack", "HPOUTL", + "Headphone Jack", "HPOUTR", + "IN2L", "Line In Jack", + "IN2R", "Line In Jack", + "Headphone Jack", "MICBIAS", + "IN1L", "Headphone Jack"; + simple-audio-card,widgets = + "Microphone", "Headphone Jack", + "Headphone", "Headphone Jack", + "Line", "Line In Jack"; + + dailink_master: simple-audio-card,codec { + clocks = <&clk IMX8MM_CLK_SAI2_ROOT>; + sound-dai = <&wm8904_1a>; + }; + + simple-audio-card,cpu { + sound-dai = <&sai2>; + }; + }; +}; + +/* Verdin SPI_1 */ +&ecspi2 { + status = "okay"; +}; + +/* EEPROM on display adapter boards */ +&eeprom_display_adapter { + status = "okay"; +}; + +/* EEPROM on Verdin Development board */ +&eeprom_carrier_board { + status = "okay"; +}; + +&fec1 { + status = "okay"; +}; + +/* Verdin QSPI_1 */ +&flexspi { + status = "okay"; +}; + +/* Current measurement into module VCC */ +&hwmon { + status = "okay"; +}; + +&hwmon_temp { + vs-supply = <®_1p8v>; + status = "okay"; +}; + +&i2c3 { + status = "okay"; +}; + +/* Verdin I2C_1 */ +&i2c4 { + status = "okay"; + + /* Audio Codec */ + wm8904_1a: audio-codec@1a { + compatible = "wlf,wm8904"; + AVDD-supply = <®_3p3v>; + clocks = <&clk IMX8MM_CLK_SAI2_ROOT>; + clock-names = "mclk"; + CPVDD-supply = <®_3p3v>; + DBVDD-supply = <®_3p3v>; + DCVDD-supply = <®_3p3v>; + MICVDD-supply = <®_3p3v>; + reg = <0x1a>; + #sound-dai-cells = <0>; + }; +}; + +/* Verdin PCIE_1 */ +&pcie0 { + status = "okay"; +}; + +&pcie_phy { + status = "okay"; +}; + +/* Verdin PWM_3_DSI */ +&pwm1 { + status = "okay"; +}; + +/* Verdin PWM_1 */ +&pwm2 { + status = "okay"; +}; + +/* Verdin PWM_2 */ +&pwm3 { + status = "okay"; +}; + +/* VERDIN I2S_1 */ +&sai2 { + status = "okay"; +}; + +/* Verdin UART_3 */ +&uart1 { + status = "okay"; +}; + +/* Verdin UART_1 */ +&uart2 { + status = "okay"; +}; + +/* Verdin UART_2 */ +&uart3 { + status = "okay"; +}; + +/* Verdin USB_1 */ +&usbotg1 { + status = "okay"; +}; + +/* Verdin USB_2 */ +&usbotg2 { + status = "okay"; +}; + +/* Verdin SD_1 */ +&usdhc2 { + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/freescale/imx8mm-verdin-dev.dtsi b/arch/arm64/boot/dts/freescale/imx8mm-verdin-dev.dtsi new file mode 100644 index 000000000000..73cc3fafa018 --- /dev/null +++ b/arch/arm64/boot/dts/freescale/imx8mm-verdin-dev.dtsi @@ -0,0 +1,67 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT +/* + * Copyright 2022 Toradex + */ + +#include "imx8mm-verdin-dahlia.dtsi" + +/ { + sound_card: sound-card { + compatible = "simple-audio-card"; + simple-audio-card,bitclock-master = <&dailink_master>; + simple-audio-card,format = "i2s"; + simple-audio-card,frame-master = <&dailink_master>; + simple-audio-card,name = "imx8mm-nau8822"; + simple-audio-card,routing = + "Headphones", "LHP", + "Headphones", "RHP", + "Speaker", "LSPK", + "Speaker", "RSPK", + "Line Out", "AUXOUT1", + "Line Out", "AUXOUT2", + "LAUX", "Line In", + "RAUX", "Line In", + "LMICP", "Mic In", + "RMICP", "Mic In"; + simple-audio-card,widgets = + "Headphones", "Headphones", + "Line Out", "Line Out", + "Speaker", "Speaker", + "Microphone", "Mic In", + "Line", "Line In"; + + dailink_master: simple-audio-card,codec { + clocks = <&clk IMX8MM_CLK_SAI2_ROOT>; + sound-dai = <&nau8822_1a>; + }; + + simple-audio-card,cpu { + sound-dai = <&sai2>; + }; + }; +}; + +&gpio_expander_21 { + status = "okay"; +}; + +/* Verdin I2C_1 */ +&i2c4 { + /* Audio Codec */ + nau8822_1a: audio-codec@1a { + compatible = "nuvoton,nau8822"; + reg = <0x1a>; + }; +}; + +/* Verdin UART_1, connector X50 through RS485 transceiver */ +&uart2 { + linux,rs485-enabled-at-boot-time; + rs485-rts-active-low; + rs485-rx-during-tx; +}; + +/* Limit frequency on dev board due to long traces and bad signal integrity */ +&usdhc2 { + max-frequency = <100000000>; +}; diff --git a/arch/arm64/boot/dts/freescale/imx8mm-verdin-nonwifi-dahlia.dts b/arch/arm64/boot/dts/freescale/imx8mm-verdin-nonwifi-dahlia.dts new file mode 100644 index 000000000000..d64ff378a152 --- /dev/null +++ b/arch/arm64/boot/dts/freescale/imx8mm-verdin-nonwifi-dahlia.dts @@ -0,0 +1,18 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT +/* + * Copyright 2022 Toradex + */ + +/dts-v1/; + +#include "imx8mm-verdin.dtsi" +#include "imx8mm-verdin-nonwifi.dtsi" +#include "imx8mm-verdin-dahlia.dtsi" + +/ { + model = "Toradex Verdin iMX8M Mini on Dahlia Board"; + compatible = "toradex,verdin-imx8mm-nonwifi-dahlia", + "toradex,verdin-imx8mm-nonwifi", + "toradex,verdin-imx8mm", + "fsl,imx8mm"; +}; diff --git a/arch/arm64/boot/dts/freescale/imx8mm-verdin-nonwifi-dev.dts b/arch/arm64/boot/dts/freescale/imx8mm-verdin-nonwifi-dev.dts new file mode 100644 index 000000000000..6ae71ecac8de --- /dev/null +++ b/arch/arm64/boot/dts/freescale/imx8mm-verdin-nonwifi-dev.dts @@ -0,0 +1,18 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT +/* + * Copyright 2022 Toradex + */ + +/dts-v1/; + +#include "imx8mm-verdin.dtsi" +#include "imx8mm-verdin-nonwifi.dtsi" +#include "imx8mm-verdin-dev.dtsi" + +/ { + model = "Toradex Verdin iMX8M Mini on Verdin Development Board"; + compatible = "toradex,verdin-imx8mm-nonwifi-dev", + "toradex,verdin-imx8mm-nonwifi", + "toradex,verdin-imx8mm", + "fsl,imx8mm"; +}; diff --git a/arch/arm64/boot/dts/freescale/imx8mm-verdin-nonwifi.dtsi b/arch/arm64/boot/dts/freescale/imx8mm-verdin-nonwifi.dtsi new file mode 100644 index 000000000000..1e0f87c7a609 --- /dev/null +++ b/arch/arm64/boot/dts/freescale/imx8mm-verdin-nonwifi.dtsi @@ -0,0 +1,75 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT +/* + * Copyright 2022 Toradex + */ + +&gpio3 { + gpio-line-names = "SODIMM_52", + "SODIMM_54", + "SODIMM_64", + "SODIMM_21", + "SODIMM_206", + "SODIMM_76", + "SODIMM_56", + "SODIMM_58", + "SODIMM_60", + "SODIMM_62", + "SODIMM_162", + "SODIMM_164", + "SODIMM_166", + "SODIMM_168", + "SODIMM_66", + "SODIMM_17", + "", + "SODIMM_156", + "SODIMM_160", + "SODIMM_244", + "", + "SODIMM_48", + "SODIMM_44", + "SODIMM_42", + "SODIMM_46"; +}; + +&gpio4 { + gpio-line-names = "SODIMM_102", + "SODIMM_90", + "SODIMM_92", + "SODIMM_94", + "SODIMM_96", + "SODIMM_100", + "SODIMM_148", + "SODIMM_152", + "SODIMM_154", + "SODIMM_174", + "SODIMM_120", + "SODIMM_104", + "SODIMM_106", + "SODIMM_108", + "SODIMM_112", + "SODIMM_114", + "SODIMM_116", + "SODIMM_150", + "SODIMM_118", + "", + "SODIMM_88", + "SODIMM_149", + "SODIMM_147", + "SODIMM_36", + "SODIMM_32", + "SODIMM_30", + "SODIMM_34", + "SODIMM_38", + "SODIMM_252", + "SODIMM_133", + "SODIMM_135", + "SODIMM_129"; +}; + +&usdhc3 { + bus-width = <4>; + pinctrl-names = "default", "state_100mhz", "state_200mhz"; + pinctrl-0 = <&pinctrl_usdhc3>; + pinctrl-1 = <&pinctrl_usdhc3_100mhz>; + pinctrl-2 = <&pinctrl_usdhc3_200mhz>; +}; diff --git a/arch/arm64/boot/dts/freescale/imx8mm-verdin-wifi-dahlia.dts b/arch/arm64/boot/dts/freescale/imx8mm-verdin-wifi-dahlia.dts new file mode 100644 index 000000000000..d424c475cba1 --- /dev/null +++ b/arch/arm64/boot/dts/freescale/imx8mm-verdin-wifi-dahlia.dts @@ -0,0 +1,18 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT +/* + * Copyright 2022 Toradex + */ + +/dts-v1/; + +#include "imx8mm-verdin.dtsi" +#include "imx8mm-verdin-wifi.dtsi" +#include "imx8mm-verdin-dahlia.dtsi" + +/ { + model = "Toradex Verdin iMX8M Mini WB on Dahlia Board"; + compatible = "toradex,verdin-imx8mm-wifi-dahlia", + "toradex,verdin-imx8mm-wifi", + "toradex,verdin-imx8mm", + "fsl,imx8mm"; +}; diff --git a/arch/arm64/boot/dts/freescale/imx8mm-verdin-wifi-dev.dts b/arch/arm64/boot/dts/freescale/imx8mm-verdin-wifi-dev.dts new file mode 100644 index 000000000000..ef952021832e --- /dev/null +++ b/arch/arm64/boot/dts/freescale/imx8mm-verdin-wifi-dev.dts @@ -0,0 +1,18 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT +/* + * Copyright 2022 Toradex + */ + +/dts-v1/; + +#include "imx8mm-verdin.dtsi" +#include "imx8mm-verdin-wifi.dtsi" +#include "imx8mm-verdin-dev.dtsi" + +/ { + model = "Toradex Verdin iMX8M Mini WB on Verdin Development Board"; + compatible = "toradex,verdin-imx8mm-wifi-dev", + "toradex,verdin-imx8mm-wifi", + "toradex,verdin-imx8mm", + "fsl,imx8mm"; +}; diff --git a/arch/arm64/boot/dts/freescale/imx8mm-verdin-wifi.dtsi b/arch/arm64/boot/dts/freescale/imx8mm-verdin-wifi.dtsi new file mode 100644 index 000000000000..3e06a6ce3406 --- /dev/null +++ b/arch/arm64/boot/dts/freescale/imx8mm-verdin-wifi.dtsi @@ -0,0 +1,94 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT +/* + * Copyright 2022 Toradex + */ + +/ { + reg_wifi_en: regulator-wifi-en { + compatible = "regulator-fixed"; + enable-active-high; + gpio = <&gpio3 25 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_wifi_pwr_en>; + regulator-max-microvolt = <3300000>; + regulator-min-microvolt = <3300000>; + regulator-name = "PDn_AW-CM276NF"; + startup-delay-us = <2000>; + }; +}; + +/* On-module Wi-Fi */ +&usdhc3 { + bus-width = <4>; + keep-power-in-suspend; + non-removable; + pinctrl-names = "default", "state_100mhz", "state_200mhz"; + pinctrl-0 = <&pinctrl_usdhc3>, <&pinctrl_wifi_ctrl>; + pinctrl-1 = <&pinctrl_usdhc3_100mhz>, <&pinctrl_wifi_ctrl>; + pinctrl-2 = <&pinctrl_usdhc3_200mhz>, <&pinctrl_wifi_ctrl>; + vmmc-supply = <®_wifi_en>; + status = "okay"; +}; + +&gpio3 { + gpio-line-names = "SODIMM_52", + "SODIMM_54", + "SODIMM_64", + "SODIMM_21", + "SODIMM_206", + "SODIMM_76", + "SODIMM_56", + "SODIMM_58", + "SODIMM_60", + "SODIMM_62", + "", + "", + "", + "", + "SODIMM_66", + "SODIMM_17", + "", + "", + "", + "SODIMM_244", + "", + "SODIMM_48", + "SODIMM_44", + "SODIMM_42", + "SODIMM_46"; +}; + +&gpio4 { + gpio-line-names = "SODIMM_102", + "SODIMM_90", + "SODIMM_92", + "SODIMM_94", + "SODIMM_96", + "SODIMM_100", + "", + "", + "", + "", + "SODIMM_120", + "SODIMM_104", + "SODIMM_106", + "SODIMM_108", + "SODIMM_112", + "SODIMM_114", + "SODIMM_116", + "", + "SODIMM_118", + "", + "SODIMM_88", + "SODIMM_149", + "SODIMM_147", + "SODIMM_36", + "SODIMM_32", + "SODIMM_30", + "SODIMM_34", + "SODIMM_38", + "SODIMM_252", + "SODIMM_133", + "SODIMM_135", + "SODIMM_129"; +}; diff --git a/arch/arm64/boot/dts/freescale/imx8mm-verdin.dtsi b/arch/arm64/boot/dts/freescale/imx8mm-verdin.dtsi new file mode 100644 index 000000000000..0d84d29e70f1 --- /dev/null +++ b/arch/arm64/boot/dts/freescale/imx8mm-verdin.dtsi @@ -0,0 +1,1264 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT +/* + * Copyright 2022 Toradex + */ + +#include "dt-bindings/phy/phy-imx8-pcie.h" +#include "dt-bindings/pwm/pwm.h" +#include "imx8mm.dtsi" + +/ { + chosen { + stdout-path = &uart1; + }; + + aliases { + rtc0 = &rtc_i2c; + rtc1 = &snvs_rtc; + }; + + backlight: backlight { + compatible = "pwm-backlight"; + brightness-levels = <0 45 63 88 119 158 203 255>; + default-brightness-level = <4>; + /* Verdin I2S_2_D_OUT (DSI_1_BKL_EN/DSI_1_BKL_EN_LVDS, SODIMM 46) */ + enable-gpios = <&gpio3 24 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2s_2_d_out_dsi_1_bkl_en>; + power-supply = <®_3p3v>; + /* Verdin PWM_3_DSI/PWM_3_DSI_LVDS (SODIMM 19) */ + pwms = <&pwm1 0 6666667 PWM_POLARITY_INVERTED>; + status = "disabled"; + }; + + /* Fixed clock dedicated to SPI CAN controller */ + clk20m: oscillator { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <20000000>; + }; + + gpio-keys { + compatible = "gpio-keys"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_gpio_keys>; + + wakeup { + debounce-interval = <10>; + /* Verdin CTRL_WAKE1_MICO# (SODIMM 252) */ + gpios = <&gpio4 28 GPIO_ACTIVE_LOW>; + label = "Wake-Up"; + linux,code = <KEY_WAKEUP>; + wakeup-source; + }; + }; + + /* Carrier Board Supplies */ + reg_1p8v: regulator-1p8v { + compatible = "regulator-fixed"; + regulator-max-microvolt = <1800000>; + regulator-min-microvolt = <1800000>; + regulator-name = "+V1.8_SW"; + }; + + reg_3p3v: regulator-3p3v { + compatible = "regulator-fixed"; + regulator-max-microvolt = <3300000>; + regulator-min-microvolt = <3300000>; + regulator-name = "+V3.3_SW"; + }; + + reg_5p0v: regulator-5p0v { + compatible = "regulator-fixed"; + regulator-max-microvolt = <5000000>; + regulator-min-microvolt = <5000000>; + regulator-name = "+V5_SW"; + }; + + /* Non PMIC On-module Supplies */ + reg_ethphy: regulator-ethphy { + compatible = "regulator-fixed"; + enable-active-high; + gpio = <&gpio2 20 GPIO_ACTIVE_HIGH>; /* PMIC_EN_ETH */ + off-on-delay = <500000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_reg_eth>; + regulator-boot-on; + regulator-max-microvolt = <3300000>; + regulator-min-microvolt = <3300000>; + regulator-name = "+V3.3_ETH"; + startup-delay-us = <200000>; + }; + + reg_usb_otg1_vbus: regulator-usb-otg1 { + compatible = "regulator-fixed"; + enable-active-high; + /* Verdin USB_1_EN (SODIMM 155) */ + gpio = <&gpio1 12 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_reg_usb1_en>; + regulator-max-microvolt = <5000000>; + regulator-min-microvolt = <5000000>; + regulator-name = "usb_otg1_vbus"; + }; + + reg_usb_otg2_vbus: regulator-usb-otg2 { + compatible = "regulator-fixed"; + enable-active-high; + /* Verdin USB_2_EN (SODIMM 185) */ + gpio = <&gpio1 14 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_reg_usb2_en>; + regulator-max-microvolt = <5000000>; + regulator-min-microvolt = <5000000>; + regulator-name = "usb_otg2_vbus"; + }; + + reg_usdhc2_vmmc: regulator-usdhc2 { + compatible = "regulator-fixed"; + enable-active-high; + /* Verdin SD_1_PWR_EN (SODIMM 76) */ + gpio = <&gpio3 5 GPIO_ACTIVE_HIGH>; + off-on-delay = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usdhc2_pwr_en>; + regulator-max-microvolt = <3300000>; + regulator-min-microvolt = <3300000>; + regulator-name = "+V3.3_SD"; + startup-delay-us = <2000>; + }; + + reserved-memory { + #address-cells = <2>; + #size-cells = <2>; + ranges; + + /* Use the kernel configuration settings instead */ + /delete-node/ linux,cma; + }; +}; + +&A53_0 { + cpu-supply = <®_vdd_arm>; +}; + +&A53_1 { + cpu-supply = <®_vdd_arm>; +}; + +&A53_2 { + cpu-supply = <®_vdd_arm>; +}; + +&A53_3 { + cpu-supply = <®_vdd_arm>; +}; + +&ddrc { + operating-points-v2 = <&ddrc_opp_table>; + + ddrc_opp_table: opp-table { + compatible = "operating-points-v2"; + + opp-25M { + opp-hz = /bits/ 64 <25000000>; + }; + + opp-100M { + opp-hz = /bits/ 64 <100000000>; + }; + + opp-750M { + opp-hz = /bits/ 64 <750000000>; + }; + }; +}; + +/* Verdin SPI_1 */ +&ecspi2 { + #address-cells = <1>; + #size-cells = <0>; + cs-gpios = <&gpio5 13 GPIO_ACTIVE_LOW>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ecspi2>; +}; + +/* Verdin CAN_1 (On-module) */ +&ecspi3 { + #address-cells = <1>; + #size-cells = <0>; + cs-gpios = <&gpio5 25 GPIO_ACTIVE_LOW>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ecspi3>; + status = "okay"; + + can1: can@0 { + compatible = "microchip,mcp251xfd"; + clocks = <&clk20m>; + interrupts-extended = <&gpio1 6 IRQ_TYPE_EDGE_FALLING>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_can1_int>; + reg = <0>; + spi-max-frequency = <8500000>; + }; +}; + +/* Verdin ETH_1 (On-module PHY) */ +&fec1 { + fsl,magic-packet; + phy-handle = <ðphy0>; + phy-mode = "rgmii-id"; + phy-supply = <®_ethphy>; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&pinctrl_fec1>; + pinctrl-1 = <&pinctrl_fec1_sleep>; + + mdio { + #address-cells = <1>; + #size-cells = <0>; + + ethphy0: ethernet-phy@7 { + compatible = "ethernet-phy-ieee802.3-c22"; + interrupt-parent = <&gpio1>; + interrupts = <10 IRQ_TYPE_LEVEL_LOW>; + micrel,led-mode = <0>; + reg = <7>; + }; + }; +}; + +/* Verdin QSPI_1 */ +&flexspi { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_flexspi0>; +}; + +&gpio1 { + gpio-line-names = "SODIMM_216", + "SODIMM_19", + "", + "", + "", + "", + "", + "", + "SODIMM_220", + "SODIMM_222", + "", + "SODIMM_218", + "SODIMM_155", + "SODIMM_157", + "SODIMM_185", + "SODIMM_187"; +}; + +&gpio2 { + gpio-line-names = "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "SODIMM_84", + "SODIMM_78", + "SODIMM_74", + "SODIMM_80", + "SODIMM_82", + "SODIMM_70", + "SODIMM_72"; +}; + +&gpio5 { + gpio-line-names = "SODIMM_131", + "", + "SODIMM_91", + "SODIMM_16", + "SODIMM_15", + "SODIMM_208", + "SODIMM_137", + "SODIMM_139", + "SODIMM_141", + "SODIMM_143", + "SODIMM_196", + "SODIMM_200", + "SODIMM_198", + "SODIMM_202", + "", + "", + "SODIMM_55", + "SODIMM_53", + "SODIMM_95", + "SODIMM_93", + "SODIMM_14", + "SODIMM_12", + "", + "", + "", + "", + "SODIMM_210", + "SODIMM_212", + "SODIMM_151", + "SODIMM_153"; + + ctrl_sleep_moci-hog { + gpio-hog; + /* Verdin CTRL_SLEEP_MOCI# (SODIMM 256) */ + gpios = <1 GPIO_ACTIVE_HIGH>; + line-name = "CTRL_SLEEP_MOCI#"; + output-high; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ctrl_sleep_moci>; + }; +}; + +/* On-module I2C */ +&i2c1 { + clock-frequency = <400000>; + pinctrl-names = "default", "gpio"; + pinctrl-0 = <&pinctrl_i2c1>; + pinctrl-1 = <&pinctrl_i2c1_gpio>; + scl-gpios = <&gpio5 14 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + sda-gpios = <&gpio5 15 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + status = "okay"; + + pca9450: pmic@25 { + compatible = "nxp,pca9450a"; + interrupt-parent = <&gpio1>; + /* PMIC PCA9450 PMIC_nINT GPIO1_IO3 */ + interrupts = <3 IRQ_TYPE_LEVEL_LOW>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pmic>; + reg = <0x25>; + sd-vsel-gpios = <&gpio1 4 GPIO_ACTIVE_HIGH>; + + regulators { + reg_vdd_soc: BUCK1 { + nxp,dvs-run-voltage = <850000>; + nxp,dvs-standby-voltage = <800000>; + regulator-always-on; + regulator-boot-on; + regulator-max-microvolt = <850000>; + regulator-min-microvolt = <800000>; + regulator-name = "+VDD_SOC"; + regulator-ramp-delay = <3125>; + }; + + reg_vdd_arm: BUCK2 { + nxp,dvs-run-voltage = <950000>; + nxp,dvs-standby-voltage = <850000>; + regulator-always-on; + regulator-boot-on; + regulator-max-microvolt = <950000>; + regulator-min-microvolt = <850000>; + regulator-name = "+VDD_ARM"; + regulator-ramp-delay = <3125>; + }; + + reg_vdd_dram: BUCK3 { + regulator-always-on; + regulator-boot-on; + regulator-max-microvolt = <950000>; + regulator-min-microvolt = <850000>; + regulator-name = "+VDD_GPU_VPU_DDR"; + }; + + reg_vdd_3v3: BUCK4 { + regulator-always-on; + regulator-boot-on; + regulator-max-microvolt = <3300000>; + regulator-min-microvolt = <3300000>; + regulator-name = "+V3.3"; + }; + + reg_vdd_1v8: BUCK5 { + regulator-always-on; + regulator-boot-on; + regulator-max-microvolt = <1800000>; + regulator-min-microvolt = <1800000>; + regulator-name = "PWR_1V8_MOCI"; + }; + + reg_nvcc_dram: BUCK6 { + regulator-always-on; + regulator-boot-on; + regulator-max-microvolt = <1100000>; + regulator-min-microvolt = <1100000>; + regulator-name = "+VDD_DDR"; + }; + + reg_nvcc_snvs: LDO1 { + regulator-always-on; + regulator-boot-on; + regulator-max-microvolt = <1800000>; + regulator-min-microvolt = <1800000>; + regulator-name = "+V1.8_SNVS"; + }; + + reg_vdd_snvs: LDO2 { + regulator-always-on; + regulator-boot-on; + regulator-max-microvolt = <900000>; + regulator-min-microvolt = <800000>; + regulator-name = "+V0.8_SNVS"; + }; + + reg_vdda: LDO3 { + regulator-always-on; + regulator-boot-on; + regulator-max-microvolt = <1800000>; + regulator-min-microvolt = <1800000>; + regulator-name = "+V1.8A"; + }; + + reg_vdd_phy: LDO4 { + regulator-always-on; + regulator-boot-on; + regulator-max-microvolt = <900000>; + regulator-min-microvolt = <900000>; + regulator-name = "+V0.9_MIPI"; + }; + + reg_nvcc_sd: LDO5 { + regulator-max-microvolt = <3300000>; + regulator-min-microvolt = <1800000>; + regulator-name = "+V3.3_1.8_SD"; + }; + }; + }; + + rtc_i2c: rtc@32 { + compatible = "epson,rx8130"; + reg = <0x32>; + }; + + adc@49 { + compatible = "ti,ads1015"; + reg = <0x49>; + #address-cells = <1>; + #size-cells = <0>; + + /* Verdin I2C_1 (ADC_4 - ADC_3) */ + channel@0 { + reg = <0>; + ti,datarate = <4>; + ti,gain = <2>; + }; + + /* Verdin I2C_1 (ADC_4 - ADC_1) */ + channel@1 { + reg = <1>; + ti,datarate = <4>; + ti,gain = <2>; + }; + + /* Verdin I2C_1 (ADC_3 - ADC_1) */ + channel@2 { + reg = <2>; + ti,datarate = <4>; + ti,gain = <2>; + }; + + /* Verdin I2C_1 (ADC_2 - ADC_1) */ + channel@3 { + reg = <3>; + ti,datarate = <4>; + ti,gain = <2>; + }; + + /* Verdin I2C_1 ADC_4 */ + channel@4 { + reg = <4>; + ti,datarate = <4>; + ti,gain = <2>; + }; + + /* Verdin I2C_1 ADC_3 */ + channel@5 { + reg = <5>; + ti,datarate = <4>; + ti,gain = <2>; + }; + + /* Verdin I2C_1 ADC_2 */ + channel@6 { + reg = <6>; + ti,datarate = <4>; + ti,gain = <2>; + }; + + /* Verdin I2C_1 ADC_1 */ + channel@7 { + reg = <7>; + ti,datarate = <4>; + ti,gain = <2>; + }; + }; + + eeprom@50 { + compatible = "st,24c02"; + pagesize = <16>; + reg = <0x50>; + }; +}; + +/* Verdin I2C_2_DSI */ +&i2c2 { + clock-frequency = <10000>; + pinctrl-names = "default", "gpio"; + pinctrl-0 = <&pinctrl_i2c2>; + pinctrl-1 = <&pinctrl_i2c2_gpio>; + scl-gpios = <&gpio5 16 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + sda-gpios = <&gpio5 17 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + status = "disabled"; +}; + +/* Verdin I2C_3_HDMI N/A */ + +/* Verdin I2C_4_CSI */ +&i2c3 { + clock-frequency = <400000>; + pinctrl-names = "default", "gpio"; + pinctrl-0 = <&pinctrl_i2c3>; + pinctrl-1 = <&pinctrl_i2c3_gpio>; + scl-gpios = <&gpio5 18 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + sda-gpios = <&gpio5 19 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; +}; + +/* Verdin I2C_1 */ +&i2c4 { + clock-frequency = <400000>; + pinctrl-names = "default", "gpio"; + pinctrl-0 = <&pinctrl_i2c4>; + pinctrl-1 = <&pinctrl_i2c4_gpio>; + scl-gpios = <&gpio5 20 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + sda-gpios = <&gpio5 21 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + + gpio_expander_21: gpio-expander@21 { + compatible = "nxp,pcal6416"; + #gpio-cells = <2>; + gpio-controller; + reg = <0x21>; + vcc-supply = <®_3p3v>; + status = "disabled"; + }; + + lvds_ti_sn65dsi83: bridge@2c { + compatible = "ti,sn65dsi83"; + /* Verdin GPIO_9_DSI (SN65DSI84 IRQ, SODIMM 17, unused) */ + /* Verdin GPIO_10_DSI (SODIMM 21) */ + enable-gpios = <&gpio3 3 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_gpio_10_dsi>; + reg = <0x2c>; + status = "disabled"; + }; + + /* Current measurement into module VCC */ + hwmon: hwmon@40 { + compatible = "ti,ina219"; + reg = <0x40>; + shunt-resistor = <10000>; + status = "disabled"; + }; + + hdmi_lontium_lt8912: hdmi@48 { + compatible = "lontium,lt8912b"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_gpio_10_dsi>, <&pinctrl_pwm_3_dsi_hpd_gpio>; + reg = <0x48>; + /* Verdin GPIO_9_DSI (LT8912 INT, SODIMM 17, unused) */ + /* Verdin GPIO_10_DSI (SODIMM 21) */ + reset-gpios = <&gpio3 3 GPIO_ACTIVE_LOW>; + status = "disabled"; + }; + + atmel_mxt_ts: touch@4a { + compatible = "atmel,maxtouch"; + /* Verdin GPIO_9_DSI */ + /* (TOUCH_INT#, SODIMM 17, also routed to SN65dsi83 IRQ albeit currently unused) */ + interrupt-parent = <&gpio3>; + interrupts = <15 IRQ_TYPE_EDGE_FALLING>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_gpio_9_dsi>, <&pinctrl_i2s_2_bclk_touch_reset>; + reg = <0x4a>; + /* Verdin I2S_2_BCLK (TOUCH_RESET#, SODIMM 42) */ + reset-gpios = <&gpio3 23 GPIO_ACTIVE_HIGH>; + status = "disabled"; + }; + + /* Temperature sensor on carrier board */ + hwmon_temp: sensor@4f { + compatible = "ti,tmp75c"; + reg = <0x4f>; + status = "disabled"; + }; + + /* EEPROM on display adapter (MIPI DSI Display Adapter) */ + eeprom_display_adapter: eeprom@50 { + compatible = "st,24c02"; + pagesize = <16>; + reg = <0x50>; + status = "disabled"; + }; + + /* EEPROM on carrier board */ + eeprom_carrier_board: eeprom@57 { + compatible = "st,24c02"; + pagesize = <16>; + reg = <0x57>; + status = "disabled"; + }; +}; + +/* Verdin PCIE_1 */ +&pcie0 { + assigned-clocks = <&clk IMX8MM_CLK_PCIE1_AUX>, + <&clk IMX8MM_CLK_PCIE1_CTRL>; + assigned-clock-parents = <&clk IMX8MM_SYS_PLL2_50M>, + <&clk IMX8MM_SYS_PLL2_250M>; + assigned-clock-rates = <10000000>, <250000000>; + clocks = <&clk IMX8MM_CLK_PCIE1_ROOT>, <&clk IMX8MM_CLK_PCIE1_AUX>, + <&clk IMX8MM_CLK_PCIE1_PHY>; + clock-names = "pcie", "pcie_aux", "pcie_bus"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pcie0>; + /* PCIE_1_RESET# (SODIMM 244) */ + reset-gpio = <&gpio3 19 GPIO_ACTIVE_LOW>; +}; + +&pcie_phy { + clocks = <&clk IMX8MM_CLK_PCIE1_PHY>; + fsl,clkreq-unsupported; + fsl,refclk-pad-mode = <IMX8_PCIE_REFCLK_PAD_OUTPUT>; + fsl,tx-deemph-gen1 = <0x2d>; + fsl,tx-deemph-gen2 = <0xf>; +}; + +/* Verdin PWM_3_DSI */ +&pwm1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pwm_1>; + #pwm-cells = <3>; +}; + +/* Verdin PWM_1 */ +&pwm2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pwm_2>; + #pwm-cells = <3>; +}; + +/* Verdin PWM_2 */ +&pwm3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pwm_3>; + #pwm-cells = <3>; +}; + +/* VERDIN I2S_1 */ +&sai2 { + #sound-dai-cells = <0>; + assigned-clock-parents = <&clk IMX8MM_AUDIO_PLL1_OUT>; + assigned-clock-rates = <24576000>; + assigned-clocks = <&clk IMX8MM_CLK_SAI2>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_sai2>; +}; + +&snvs_pwrkey { + status = "okay"; +}; + +/* Verdin UART_3, used as the Linux console */ +&uart1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart1>; +}; + +/* Verdin UART_1 */ +&uart2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart2>; + uart-has-rtscts; +}; + +/* Verdin UART_2 */ +&uart3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart3>; + uart-has-rtscts; +}; + +/* Verdin UART_4 */ +/* + * Resource allocated to M4 by default, must not be accessed from Cortex-A35 or you get an OOPS + */ +&uart4 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart4>; +}; + +/* Verdin USB_1 */ +&usbotg1 { + adp-disable; + dr_mode = "otg"; + hnp-disable; + over-current-active-low; + samsung,picophy-dc-vol-level-adjust = <7>; + samsung,picophy-pre-emp-curr-control = <3>; + srp-disable; + vbus-supply = <®_usb_otg1_vbus>; +}; + +/* Verdin USB_2 */ +&usbotg2 { + dr_mode = "host"; + over-current-active-low; + samsung,picophy-dc-vol-level-adjust = <7>; + samsung,picophy-pre-emp-curr-control = <3>; + vbus-supply = <®_usb_otg2_vbus>; +}; + +&usbphynop1 { + vcc-supply = <®_vdd_3v3>; +}; + +&usbphynop2 { + vcc-supply = <®_vdd_3v3>; +}; + +/* On-module eMMC */ +&usdhc1 { + bus-width = <8>; + keep-power-in-suspend; + non-removable; + pinctrl-names = "default", "state_100mhz", "state_200mhz"; + pinctrl-0 = <&pinctrl_usdhc1>; + pinctrl-1 = <&pinctrl_usdhc1_100mhz>; + pinctrl-2 = <&pinctrl_usdhc1_200mhz>; + status = "okay"; +}; + +/* Verdin SD_1 */ +&usdhc2 { + bus-width = <4>; + cd-gpios = <&gpio2 12 GPIO_ACTIVE_LOW>; + disable-wp; + pinctrl-names = "default", "state_100mhz", "state_200mhz"; + pinctrl-0 = <&pinctrl_usdhc2>, <&pinctrl_usdhc2_cd>; + pinctrl-1 = <&pinctrl_usdhc2_100mhz>, <&pinctrl_usdhc2_cd>; + pinctrl-2 = <&pinctrl_usdhc2_200mhz>, <&pinctrl_usdhc2_cd>; + vmmc-supply = <®_usdhc2_vmmc>; +}; + +&wdog1 { + fsl,ext-reset-output; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_wdog>; + status = "okay"; +}; + +&iomuxc { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_gpio1>, <&pinctrl_gpio2>, + <&pinctrl_gpio3>, <&pinctrl_gpio4>, + <&pinctrl_gpio7>, <&pinctrl_gpio8>, + <&pinctrl_gpio_hog1>, <&pinctrl_gpio_hog2>, <&pinctrl_gpio_hog3>, + <&pinctrl_pmic_tpm_ena>; + + pinctrl_can1_int: can1intgrp { + fsl,pins = + <MX8MM_IOMUXC_GPIO1_IO06_GPIO1_IO6 0x1c4>; /* CAN_1_SPI_INT#_1.8V */ + }; + + pinctrl_can2_int: can2intgrp { + fsl,pins = + <MX8MM_IOMUXC_GPIO1_IO07_GPIO1_IO7 0x1c4>; /* CAN_2_SPI_INT#_1.8V */ + }; + + pinctrl_ctrl_sleep_moci: ctrlsleepmocigrp { + fsl,pins = + <MX8MM_IOMUXC_SAI3_TXD_GPIO5_IO1 0x1c4>; /* SODIMM 256 */ + }; + + pinctrl_ecspi2: ecspi2grp { + fsl,pins = + <MX8MM_IOMUXC_ECSPI2_SCLK_ECSPI2_SCLK 0x4>, /* SODIMM 196 */ + <MX8MM_IOMUXC_ECSPI2_MOSI_ECSPI2_MOSI 0x4>, /* SODIMM 200 */ + <MX8MM_IOMUXC_ECSPI2_MISO_ECSPI2_MISO 0x1c4>, /* SODIMM 198 */ + <MX8MM_IOMUXC_ECSPI2_SS0_GPIO5_IO13 0x1c4>; /* SODIMM 202 */ + }; + + pinctrl_ecspi3: ecspi3grp { + fsl,pins = + <MX8MM_IOMUXC_UART1_RXD_ECSPI3_SCLK 0x4>, /* CAN_SPI_SCK_1.8V */ + <MX8MM_IOMUXC_UART1_TXD_ECSPI3_MOSI 0x4>, /* CAN_SPI_MOSI_1.8V */ + <MX8MM_IOMUXC_UART2_RXD_ECSPI3_MISO 0x1c4>, /* CAN_SPI_MISO_1.8V */ + <MX8MM_IOMUXC_UART2_TXD_GPIO5_IO25 0x1c4>, /* CAN_1_SPI_CS_1.8V# */ + <MX8MM_IOMUXC_GPIO1_IO05_GPIO1_IO5 0x1c4>; /* CAN_2_SPI_CS#_1.8V */ + }; + + pinctrl_fec1: fec1grp { + fsl,pins = + <MX8MM_IOMUXC_ENET_MDC_ENET1_MDC 0x3>, + <MX8MM_IOMUXC_ENET_MDIO_ENET1_MDIO 0x3>, + <MX8MM_IOMUXC_ENET_TD3_ENET1_RGMII_TD3 0x1f>, + <MX8MM_IOMUXC_ENET_TD2_ENET1_RGMII_TD2 0x1f>, + <MX8MM_IOMUXC_ENET_TD1_ENET1_RGMII_TD1 0x1f>, + <MX8MM_IOMUXC_ENET_TD0_ENET1_RGMII_TD0 0x1f>, + <MX8MM_IOMUXC_ENET_RD3_ENET1_RGMII_RD3 0x91>, + <MX8MM_IOMUXC_ENET_RD2_ENET1_RGMII_RD2 0x91>, + <MX8MM_IOMUXC_ENET_RD1_ENET1_RGMII_RD1 0x91>, + <MX8MM_IOMUXC_ENET_RD0_ENET1_RGMII_RD0 0x91>, + <MX8MM_IOMUXC_ENET_TXC_ENET1_RGMII_TXC 0x1f>, + <MX8MM_IOMUXC_ENET_RXC_ENET1_RGMII_RXC 0x91>, + <MX8MM_IOMUXC_ENET_RX_CTL_ENET1_RGMII_RX_CTL 0x91>, + <MX8MM_IOMUXC_ENET_TX_CTL_ENET1_RGMII_TX_CTL 0x1f>, + <MX8MM_IOMUXC_GPIO1_IO10_GPIO1_IO10 0x1c4>; + }; + + pinctrl_fec1_sleep: fec1-sleepgrp { + fsl,pins = + <MX8MM_IOMUXC_ENET_MDC_ENET1_MDC 0x3>, + <MX8MM_IOMUXC_ENET_MDIO_ENET1_MDIO 0x3>, + <MX8MM_IOMUXC_ENET_TD3_GPIO1_IO18 0x1f>, + <MX8MM_IOMUXC_ENET_TD2_GPIO1_IO19 0x1f>, + <MX8MM_IOMUXC_ENET_TD1_GPIO1_IO20 0x1f>, + <MX8MM_IOMUXC_ENET_TD0_GPIO1_IO21 0x1f>, + <MX8MM_IOMUXC_ENET_RD3_ENET1_RGMII_RD3 0x91>, + <MX8MM_IOMUXC_ENET_RD2_ENET1_RGMII_RD2 0x91>, + <MX8MM_IOMUXC_ENET_RD1_ENET1_RGMII_RD1 0x91>, + <MX8MM_IOMUXC_ENET_RD0_ENET1_RGMII_RD0 0x91>, + <MX8MM_IOMUXC_ENET_TXC_GPIO1_IO23 0x1f>, + <MX8MM_IOMUXC_ENET_RXC_ENET1_RGMII_RXC 0x91>, + <MX8MM_IOMUXC_ENET_RX_CTL_ENET1_RGMII_RX_CTL 0x91>, + <MX8MM_IOMUXC_ENET_TX_CTL_GPIO1_IO22 0x1f>, + <MX8MM_IOMUXC_GPIO1_IO10_GPIO1_IO10 0x184>; + }; + + pinctrl_flexspi0: flexspi0grp { + fsl,pins = + <MX8MM_IOMUXC_NAND_ALE_QSPI_A_SCLK 0x1c2>, /* SODIMM 52 */ + <MX8MM_IOMUXC_NAND_CE0_B_QSPI_A_SS0_B 0x82>, /* SODIMM 54 */ + <MX8MM_IOMUXC_NAND_CE1_B_QSPI_A_SS1_B 0x82>, /* SODIMM 64 */ + <MX8MM_IOMUXC_NAND_DQS_QSPI_A_DQS 0x82>, /* SODIMM 66 */ + <MX8MM_IOMUXC_NAND_DATA00_QSPI_A_DATA0 0x82>, /* SODIMM 56 */ + <MX8MM_IOMUXC_NAND_DATA01_QSPI_A_DATA1 0x82>, /* SODIMM 58 */ + <MX8MM_IOMUXC_NAND_DATA02_QSPI_A_DATA2 0x82>, /* SODIMM 60 */ + <MX8MM_IOMUXC_NAND_DATA03_QSPI_A_DATA3 0x82>; /* SODIMM 62 */ + }; + + pinctrl_gpio1: gpio1grp { + fsl,pins = + <MX8MM_IOMUXC_NAND_CE3_B_GPIO3_IO4 0x184>; /* SODIMM 206 */ + }; + + pinctrl_gpio2: gpio2grp { + fsl,pins = + <MX8MM_IOMUXC_SPDIF_EXT_CLK_GPIO5_IO5 0x1c4>; /* SODIMM 208 */ + }; + + pinctrl_gpio3: gpio3grp { + fsl,pins = + <MX8MM_IOMUXC_UART3_RXD_GPIO5_IO26 0x184>; /* SODIMM 210 */ + }; + + pinctrl_gpio4: gpio4grp { + fsl,pins = + <MX8MM_IOMUXC_UART3_TXD_GPIO5_IO27 0x184>; /* SODIMM 212 */ + }; + + pinctrl_gpio5: gpio5grp { + fsl,pins = + <MX8MM_IOMUXC_GPIO1_IO00_GPIO1_IO0 0x184>; /* SODIMM 216 */ + }; + + pinctrl_gpio6: gpio6grp { + fsl,pins = + <MX8MM_IOMUXC_GPIO1_IO11_GPIO1_IO11 0x184>; /* SODIMM 218 */ + }; + + pinctrl_gpio7: gpio7grp { + fsl,pins = + <MX8MM_IOMUXC_GPIO1_IO08_GPIO1_IO8 0x184>; /* SODIMM 220 */ + }; + + pinctrl_gpio8: gpio8grp { + fsl,pins = + <MX8MM_IOMUXC_GPIO1_IO09_GPIO1_IO9 0x184>; /* SODIMM 222 */ + }; + + /* Verdin GPIO_9_DSI (pulled-up as active-low) */ + pinctrl_gpio_9_dsi: gpio9dsigrp { + fsl,pins = + <MX8MM_IOMUXC_NAND_RE_B_GPIO3_IO15 0x1c4>; /* SODIMM 17 */ + }; + + /* Verdin GPIO_10_DSI */ + pinctrl_gpio_10_dsi: gpio10dsigrp { + fsl,pins = + <MX8MM_IOMUXC_NAND_CE2_B_GPIO3_IO3 0x1c4>; /* SODIMM 21 */ + }; + + pinctrl_gpio_hog1: gpiohog1grp { + fsl,pins = + <MX8MM_IOMUXC_SAI1_MCLK_GPIO4_IO20 0x1c4>, /* SODIMM 88 */ + <MX8MM_IOMUXC_SAI1_RXC_GPIO4_IO1 0x1c4>, /* SODIMM 90 */ + <MX8MM_IOMUXC_SAI1_RXD0_GPIO4_IO2 0x1c4>, /* SODIMM 92 */ + <MX8MM_IOMUXC_SAI1_RXD1_GPIO4_IO3 0x1c4>, /* SODIMM 94 */ + <MX8MM_IOMUXC_SAI1_RXD2_GPIO4_IO4 0x1c4>, /* SODIMM 96 */ + <MX8MM_IOMUXC_SAI1_RXD3_GPIO4_IO5 0x1c4>, /* SODIMM 100 */ + <MX8MM_IOMUXC_SAI1_RXFS_GPIO4_IO0 0x1c4>, /* SODIMM 102 */ + <MX8MM_IOMUXC_SAI1_TXC_GPIO4_IO11 0x1c4>, /* SODIMM 104 */ + <MX8MM_IOMUXC_SAI1_TXD0_GPIO4_IO12 0x1c4>, /* SODIMM 106 */ + <MX8MM_IOMUXC_SAI1_TXD1_GPIO4_IO13 0x1c4>, /* SODIMM 108 */ + <MX8MM_IOMUXC_SAI1_TXD2_GPIO4_IO14 0x1c4>, /* SODIMM 112 */ + <MX8MM_IOMUXC_SAI1_TXD3_GPIO4_IO15 0x1c4>, /* SODIMM 114 */ + <MX8MM_IOMUXC_SAI1_TXD4_GPIO4_IO16 0x1c4>, /* SODIMM 116 */ + <MX8MM_IOMUXC_SAI1_TXD6_GPIO4_IO18 0x1c4>, /* SODIMM 118 */ + <MX8MM_IOMUXC_SAI1_TXFS_GPIO4_IO10 0x1c4>; /* SODIMM 120 */ + }; + + pinctrl_gpio_hog2: gpiohog2grp { + fsl,pins = + <MX8MM_IOMUXC_SAI3_MCLK_GPIO5_IO2 0x1c4>; /* SODIMM 91 */ + }; + + pinctrl_gpio_hog3: gpiohog3grp { + fsl,pins = + <MX8MM_IOMUXC_GPIO1_IO13_GPIO1_IO13 0x1c4>, /* SODIMM 157 */ + <MX8MM_IOMUXC_GPIO1_IO15_GPIO1_IO15 0x1c4>; /* SODIMM 187 */ + }; + + pinctrl_gpio_keys: gpiokeysgrp { + fsl,pins = + <MX8MM_IOMUXC_SAI3_RXFS_GPIO4_IO28 0x1c4>; /* SODIMM 252 */ + }; + + /* On-module I2C */ + pinctrl_i2c1: i2c1grp { + fsl,pins = + <MX8MM_IOMUXC_I2C1_SCL_I2C1_SCL 0x400001c6>, /* PMIC_I2C_SCL */ + <MX8MM_IOMUXC_I2C1_SDA_I2C1_SDA 0x400001c6>; /* PMIC_I2C_SDA */ + }; + + pinctrl_i2c1_gpio: i2c1gpiogrp { + fsl,pins = + <MX8MM_IOMUXC_I2C1_SCL_GPIO5_IO14 0x400001c6>, /* PMIC_I2C_SCL */ + <MX8MM_IOMUXC_I2C1_SDA_GPIO5_IO15 0x400001c6>; /* PMIC_I2C_SDA */ + }; + + /* Verdin I2C_4_CSI */ + pinctrl_i2c2: i2c2grp { + fsl,pins = + <MX8MM_IOMUXC_I2C2_SCL_I2C2_SCL 0x400001c6>, /* SODIMM 55 */ + <MX8MM_IOMUXC_I2C2_SDA_I2C2_SDA 0x400001c6>; /* SODIMM 53 */ + }; + + pinctrl_i2c2_gpio: i2c2gpiogrp { + fsl,pins = + <MX8MM_IOMUXC_I2C2_SCL_GPIO5_IO16 0x400001c6>, /* SODIMM 55 */ + <MX8MM_IOMUXC_I2C2_SDA_GPIO5_IO17 0x400001c6>; /* SODIMM 53 */ + }; + + /* Verdin I2C_2_DSI */ + pinctrl_i2c3: i2c3grp { + fsl,pins = + <MX8MM_IOMUXC_I2C3_SCL_I2C3_SCL 0x400001c6>, /* SODIMM 95 */ + <MX8MM_IOMUXC_I2C3_SDA_I2C3_SDA 0x400001c6>; /* SODIMM 93 */ + }; + + pinctrl_i2c3_gpio: i2c3gpiogrp { + fsl,pins = + <MX8MM_IOMUXC_I2C3_SCL_GPIO5_IO18 0x400001c6>, /* SODIMM 95 */ + <MX8MM_IOMUXC_I2C3_SDA_GPIO5_IO19 0x400001c6>; /* SODIMM 93 */ + }; + + /* Verdin I2C_1 */ + pinctrl_i2c4: i2c4grp { + fsl,pins = + <MX8MM_IOMUXC_I2C4_SCL_I2C4_SCL 0x400001c6>, /* SODIMM 14 */ + <MX8MM_IOMUXC_I2C4_SDA_I2C4_SDA 0x400001c6>; /* SODIMM 12 */ + }; + + pinctrl_i2c4_gpio: i2c4gpiogrp { + fsl,pins = + <MX8MM_IOMUXC_I2C4_SCL_GPIO5_IO20 0x400001c6>, /* SODIMM 14 */ + <MX8MM_IOMUXC_I2C4_SDA_GPIO5_IO21 0x400001c6>; /* SODIMM 12 */ + }; + + /* Verdin I2S_2_BCLK (TOUCH_RESET#) */ + pinctrl_i2s_2_bclk_touch_reset: i2s2bclktouchresetgrp { + fsl,pins = + <MX8MM_IOMUXC_SAI5_RXD2_GPIO3_IO23 0x184>; /* SODIMM 42 */ + }; + + /* Verdin I2S_2_D_OUT shared with SAI5 */ + pinctrl_i2s_2_d_out_dsi_1_bkl_en: i2s2doutdsi1bklengrp { + fsl,pins = + <MX8MM_IOMUXC_SAI5_RXD3_GPIO3_IO24 0x184>; /* SODIMM 46 */ + }; + + pinctrl_pcie0: pcie0grp { + fsl,pins = + <MX8MM_IOMUXC_SAI5_RXFS_GPIO3_IO19 0x6>, /* SODIMM 244 */ + /* PMIC_EN_PCIe_CLK, unused */ + <MX8MM_IOMUXC_SD2_RESET_B_GPIO2_IO19 0x6>; + }; + + pinctrl_pmic: pmicirqgrp { + fsl,pins = + <MX8MM_IOMUXC_GPIO1_IO03_GPIO1_IO3 0x41>; /* PMIC_INT# */ + }; + + /* Verdin PWM_3_DSI shared with GPIO1_IO1 */ + pinctrl_pwm_1: pwm1grp { + fsl,pins = + <MX8MM_IOMUXC_GPIO1_IO01_PWM1_OUT 0x6>; /* SODIMM 19 */ + }; + + pinctrl_pwm_2: pwm2grp { + fsl,pins = + <MX8MM_IOMUXC_SPDIF_RX_PWM2_OUT 0x6>; /* SODIMM 15 */ + }; + + pinctrl_pwm_3: pwm3grp { + fsl,pins = + <MX8MM_IOMUXC_SPDIF_TX_PWM3_OUT 0x6>; /* SODIMM 16 */ + }; + + /* Verdin PWM_3_DSI (pulled-down as active-high) shared with PWM1_OUT */ + pinctrl_pwm_3_dsi_hpd_gpio: pwm3dsihpdgpiogrp { + fsl,pins = + <MX8MM_IOMUXC_GPIO1_IO01_GPIO1_IO1 0x184>; /* SODIMM 19 */ + }; + + pinctrl_reg_eth: regethgrp { + fsl,pins = + <MX8MM_IOMUXC_SD2_WP_GPIO2_IO20 0x184>; /* PMIC_EN_ETH */ + }; + + pinctrl_reg_usb1_en: regusb1engrp { + fsl,pins = + <MX8MM_IOMUXC_GPIO1_IO12_GPIO1_IO12 0x184>; /* SODIMM 155 */ + }; + + pinctrl_reg_usb2_en: regusb2engrp { + fsl,pins = + <MX8MM_IOMUXC_GPIO1_IO14_GPIO1_IO14 0x184>; /* SODIMM 185 */ + }; + + pinctrl_sai2: sai2grp { + fsl,pins = + <MX8MM_IOMUXC_SAI2_TXFS_SAI2_TX_SYNC 0xd6>, /* SODIMM 32 */ + <MX8MM_IOMUXC_SAI2_TXC_SAI2_TX_BCLK 0xd6>, /* SODIMM 30 */ + <MX8MM_IOMUXC_SAI2_MCLK_SAI2_MCLK 0xd6>, /* SODIMM 38 */ + <MX8MM_IOMUXC_SAI2_RXD0_SAI2_RX_DATA0 0xd6>, /* SODIMM 36 */ + <MX8MM_IOMUXC_SAI2_TXD0_SAI2_TX_DATA0 0xd6>; /* SODIMM 34 */ + }; + + pinctrl_sai5: sai5grp { + fsl,pins = + <MX8MM_IOMUXC_SAI5_RXD0_SAI5_RX_DATA0 0xd6>, /* SODIMM 48 */ + <MX8MM_IOMUXC_SAI5_RXD1_SAI5_TX_SYNC 0xd6>, /* SODIMM 44 */ + <MX8MM_IOMUXC_SAI5_RXD2_SAI5_TX_BCLK 0xd6>, /* SODIMM 42 */ + <MX8MM_IOMUXC_SAI5_RXD3_SAI5_TX_DATA0 0xd6>; /* SODIMM 46 */ + }; + + /* control signal for optional ATTPM20P or SE050 */ + pinctrl_pmic_tpm_ena: pmictpmenagrp { + fsl,pins = + <MX8MM_IOMUXC_SAI1_TXD7_GPIO4_IO19 0x1c4>; /* PMIC_TPM_ENA */ + }; + + pinctrl_tsp: tspgrp { + fsl,pins = + <MX8MM_IOMUXC_SAI1_RXD4_GPIO4_IO6 0x140>, /* SODIMM 148 */ + <MX8MM_IOMUXC_SAI1_RXD5_GPIO4_IO7 0x140>, /* SODIMM 152 */ + <MX8MM_IOMUXC_SAI1_RXD6_GPIO4_IO8 0x140>, /* SODIMM 154 */ + <MX8MM_IOMUXC_SAI1_RXD7_GPIO4_IO9 0x140>, /* SODIMM 174 */ + <MX8MM_IOMUXC_SAI1_TXD5_GPIO4_IO17 0x140>; /* SODIMM 150 */ + }; + + pinctrl_uart1: uart1grp { + fsl,pins = + <MX8MM_IOMUXC_SAI2_RXFS_UART1_DCE_TX 0x1c4>, /* SODIMM 149 */ + <MX8MM_IOMUXC_SAI2_RXC_UART1_DCE_RX 0x1c4>; /* SODIMM 147 */ + }; + + pinctrl_uart2: uart2grp { + fsl,pins = + <MX8MM_IOMUXC_SAI3_TXFS_UART2_DCE_RX 0x1c4>, /* SODIMM 129 */ + <MX8MM_IOMUXC_SAI3_TXC_UART2_DCE_TX 0x1c4>, /* SODIMM 131 */ + <MX8MM_IOMUXC_SAI3_RXC_UART2_DCE_CTS_B 0x1c4>, /* SODIMM 133 */ + <MX8MM_IOMUXC_SAI3_RXD_UART2_DCE_RTS_B 0x1c4>; /* SODIMM 135 */ + }; + + pinctrl_uart3: uart3grp { + fsl,pins = + <MX8MM_IOMUXC_ECSPI1_SCLK_UART3_DCE_RX 0x1c4>, /* SODIMM 137 */ + <MX8MM_IOMUXC_ECSPI1_MOSI_UART3_DCE_TX 0x1c4>, /* SODIMM 139 */ + <MX8MM_IOMUXC_ECSPI1_MISO_UART3_DCE_CTS_B 0x1c4>, /* SODIMM 141 */ + <MX8MM_IOMUXC_ECSPI1_SS0_UART3_DCE_RTS_B 0x1c4>; /* SODIMM 143 */ + }; + + pinctrl_uart4: uart4grp { + fsl,pins = + <MX8MM_IOMUXC_UART4_RXD_UART4_DCE_RX 0x1c4>, /* SODIMM 151 */ + <MX8MM_IOMUXC_UART4_TXD_UART4_DCE_TX 0x1c4>; /* SODIMM 153 */ + }; + + pinctrl_usdhc1: usdhc1grp { + fsl,pins = + <MX8MM_IOMUXC_SD1_CLK_USDHC1_CLK 0x190>, + <MX8MM_IOMUXC_SD1_CMD_USDHC1_CMD 0x1d0>, + <MX8MM_IOMUXC_SD1_DATA0_USDHC1_DATA0 0x1d0>, + <MX8MM_IOMUXC_SD1_DATA1_USDHC1_DATA1 0x1d0>, + <MX8MM_IOMUXC_SD1_DATA2_USDHC1_DATA2 0x1d0>, + <MX8MM_IOMUXC_SD1_DATA3_USDHC1_DATA3 0x1d0>, + <MX8MM_IOMUXC_SD1_DATA4_USDHC1_DATA4 0x1d0>, + <MX8MM_IOMUXC_SD1_DATA5_USDHC1_DATA5 0x1d0>, + <MX8MM_IOMUXC_SD1_DATA6_USDHC1_DATA6 0x1d0>, + <MX8MM_IOMUXC_SD1_DATA7_USDHC1_DATA7 0x1d0>, + <MX8MM_IOMUXC_SD1_RESET_B_USDHC1_RESET_B 0x1d1>, + <MX8MM_IOMUXC_SD1_STROBE_USDHC1_STROBE 0x190>; + }; + + pinctrl_usdhc1_100mhz: usdhc1-100mhzgrp { + fsl,pins = + <MX8MM_IOMUXC_SD1_CLK_USDHC1_CLK 0x194>, + <MX8MM_IOMUXC_SD1_CMD_USDHC1_CMD 0x1d4>, + <MX8MM_IOMUXC_SD1_DATA0_USDHC1_DATA0 0x1d4>, + <MX8MM_IOMUXC_SD1_DATA1_USDHC1_DATA1 0x1d4>, + <MX8MM_IOMUXC_SD1_DATA2_USDHC1_DATA2 0x1d4>, + <MX8MM_IOMUXC_SD1_DATA3_USDHC1_DATA3 0x1d4>, + <MX8MM_IOMUXC_SD1_DATA4_USDHC1_DATA4 0x1d4>, + <MX8MM_IOMUXC_SD1_DATA5_USDHC1_DATA5 0x1d4>, + <MX8MM_IOMUXC_SD1_DATA6_USDHC1_DATA6 0x1d4>, + <MX8MM_IOMUXC_SD1_DATA7_USDHC1_DATA7 0x1d4>, + <MX8MM_IOMUXC_SD1_RESET_B_USDHC1_RESET_B 0x1d1>, + <MX8MM_IOMUXC_SD1_STROBE_USDHC1_STROBE 0x194>; + }; + + pinctrl_usdhc1_200mhz: usdhc1-200mhzgrp { + fsl,pins = + <MX8MM_IOMUXC_SD1_CLK_USDHC1_CLK 0x196>, + <MX8MM_IOMUXC_SD1_CMD_USDHC1_CMD 0x1d6>, + <MX8MM_IOMUXC_SD1_DATA0_USDHC1_DATA0 0x1d6>, + <MX8MM_IOMUXC_SD1_DATA1_USDHC1_DATA1 0x1d6>, + <MX8MM_IOMUXC_SD1_DATA2_USDHC1_DATA2 0x1d6>, + <MX8MM_IOMUXC_SD1_DATA3_USDHC1_DATA3 0x1d6>, + <MX8MM_IOMUXC_SD1_DATA4_USDHC1_DATA4 0x1d6>, + <MX8MM_IOMUXC_SD1_DATA5_USDHC1_DATA5 0x1d6>, + <MX8MM_IOMUXC_SD1_DATA6_USDHC1_DATA6 0x1d6>, + <MX8MM_IOMUXC_SD1_DATA7_USDHC1_DATA7 0x1d6>, + <MX8MM_IOMUXC_SD1_RESET_B_USDHC1_RESET_B 0x1d1>, + <MX8MM_IOMUXC_SD1_STROBE_USDHC1_STROBE 0x196>; + }; + + pinctrl_usdhc2_cd: usdhc2cdgrp { + fsl,pins = + <MX8MM_IOMUXC_SD2_CD_B_GPIO2_IO12 0x1c4>; /* SODIMM 84 */ + }; + + pinctrl_usdhc2_pwr_en: usdhc2pwrengrp { + fsl,pins = + <MX8MM_IOMUXC_NAND_CLE_GPIO3_IO5 0x184>; /* SODIMM 76 */ + }; + + pinctrl_usdhc2: usdhc2grp { + fsl,pins = + <MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK 0x190>, /* SODIMM 78 */ + <MX8MM_IOMUXC_SD2_CMD_USDHC2_CMD 0x1d0>, /* SODIMM 74 */ + <MX8MM_IOMUXC_SD2_DATA0_USDHC2_DATA0 0x1d0>, /* SODIMM 80 */ + <MX8MM_IOMUXC_SD2_DATA1_USDHC2_DATA1 0x1d0>, /* SODIMM 82 */ + <MX8MM_IOMUXC_SD2_DATA2_USDHC2_DATA2 0x1d0>, /* SODIMM 70 */ + <MX8MM_IOMUXC_SD2_DATA3_USDHC2_DATA3 0x1d0>, /* SODIMM 72 */ + <MX8MM_IOMUXC_GPIO1_IO04_USDHC2_VSELECT 0x1d0>; + }; + + pinctrl_usdhc2_100mhz: usdhc2-100mhzgrp { + fsl,pins = + <MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK 0x194>, + <MX8MM_IOMUXC_SD2_CMD_USDHC2_CMD 0x1d4>, + <MX8MM_IOMUXC_SD2_DATA0_USDHC2_DATA0 0x1d4>, + <MX8MM_IOMUXC_SD2_DATA1_USDHC2_DATA1 0x1d4>, + <MX8MM_IOMUXC_SD2_DATA2_USDHC2_DATA2 0x1d4>, + <MX8MM_IOMUXC_SD2_DATA3_USDHC2_DATA3 0x1d4>, + <MX8MM_IOMUXC_GPIO1_IO04_USDHC2_VSELECT 0x1d0>; + }; + + pinctrl_usdhc2_200mhz: usdhc2-200mhzgrp { + fsl,pins = + <MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK 0x196>, + <MX8MM_IOMUXC_SD2_CMD_USDHC2_CMD 0x1d6>, + <MX8MM_IOMUXC_SD2_DATA0_USDHC2_DATA0 0x1d6>, + <MX8MM_IOMUXC_SD2_DATA1_USDHC2_DATA1 0x1d6>, + <MX8MM_IOMUXC_SD2_DATA2_USDHC2_DATA2 0x1d6>, + <MX8MM_IOMUXC_SD2_DATA3_USDHC2_DATA3 0x1d6>, + <MX8MM_IOMUXC_GPIO1_IO04_USDHC2_VSELECT 0x1d0>; + }; + + /* On-module Wi-Fi/BT or type specific SDHC interface */ + /* (e.g. on X52 extension slot of Verdin Development Board) */ + pinctrl_usdhc3: usdhc3grp { + fsl,pins = + <MX8MM_IOMUXC_NAND_WE_B_USDHC3_CLK 0x190>, + <MX8MM_IOMUXC_NAND_WP_B_USDHC3_CMD 0x1d0>, + <MX8MM_IOMUXC_NAND_DATA04_USDHC3_DATA0 0x1d0>, + <MX8MM_IOMUXC_NAND_DATA05_USDHC3_DATA1 0x1d0>, + <MX8MM_IOMUXC_NAND_DATA06_USDHC3_DATA2 0x1d0>, + <MX8MM_IOMUXC_NAND_DATA07_USDHC3_DATA3 0x1d0>; + }; + + pinctrl_usdhc3_100mhz: usdhc3-100mhzgrp { + fsl,pins = + <MX8MM_IOMUXC_NAND_WE_B_USDHC3_CLK 0x194>, + <MX8MM_IOMUXC_NAND_WP_B_USDHC3_CMD 0x1d4>, + <MX8MM_IOMUXC_NAND_DATA04_USDHC3_DATA0 0x1d4>, + <MX8MM_IOMUXC_NAND_DATA05_USDHC3_DATA1 0x1d4>, + <MX8MM_IOMUXC_NAND_DATA06_USDHC3_DATA2 0x1d4>, + <MX8MM_IOMUXC_NAND_DATA07_USDHC3_DATA3 0x1d4>; + }; + + pinctrl_usdhc3_200mhz: usdhc3-200mhzgrp { + fsl,pins = + <MX8MM_IOMUXC_NAND_WE_B_USDHC3_CLK 0x196>, + <MX8MM_IOMUXC_NAND_WP_B_USDHC3_CMD 0x1d6>, + <MX8MM_IOMUXC_NAND_DATA04_USDHC3_DATA0 0x1d6>, + <MX8MM_IOMUXC_NAND_DATA05_USDHC3_DATA1 0x1d6>, + <MX8MM_IOMUXC_NAND_DATA06_USDHC3_DATA2 0x1d6>, + <MX8MM_IOMUXC_NAND_DATA07_USDHC3_DATA3 0x1d6>; + }; + + pinctrl_wdog: wdoggrp { + fsl,pins = + <MX8MM_IOMUXC_GPIO1_IO02_WDOG1_WDOG_B 0xc6>; /* PMIC_WDI */ + }; + + pinctrl_wifi_ctrl: wifictrlgrp { + fsl,pins = + <MX8MM_IOMUXC_NAND_READY_B_GPIO3_IO16 0x1c4>, /* WIFI_WKUP_BT */ + <MX8MM_IOMUXC_SAI1_RXD7_GPIO4_IO9 0x1c4>, /* WIFI_W_WKUP_HOST */ + <MX8MM_IOMUXC_SAI5_RXC_GPIO3_IO20 0x1c4>; /* WIFI_WKUP_WLAN */ + }; + + pinctrl_wifi_i2s: bti2sgrp { + fsl,pins = + <MX8MM_IOMUXC_SAI1_RXD4_SAI6_TX_BCLK 0xd6>, /* WIFI_TX_BCLK */ + <MX8MM_IOMUXC_SAI1_RXD5_SAI6_TX_DATA0 0xd6>, /* WIFI_TX_DATA0 */ + <MX8MM_IOMUXC_SAI1_RXD6_SAI6_TX_SYNC 0xd6>, /* WIFI_TX_SYNC */ + <MX8MM_IOMUXC_SAI1_TXD5_SAI6_RX_DATA0 0xd6>; /* WIFI_RX_DATA0 */ + }; + + pinctrl_wifi_pwr_en: wifipwrengrp { + fsl,pins = + <MX8MM_IOMUXC_SAI5_MCLK_GPIO3_IO25 0x184>; /* PMIC_EN_WIFI */ + }; +}; diff --git a/arch/arm64/boot/dts/freescale/imx8mm.dtsi b/arch/arm64/boot/dts/freescale/imx8mm.dtsi index 0c7a72c51a31..1ee05677c2dd 100644 --- a/arch/arm64/boot/dts/freescale/imx8mm.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8mm.dtsi @@ -548,7 +548,7 @@ }; gpr: iomuxc-gpr@30340000 { - compatible = "fsl,imx8mm-iomuxc-gpr", "syscon"; + compatible = "fsl,imx8mm-iomuxc-gpr", "fsl,imx6q-iomuxc-gpr", "syscon"; reg = <0x30340000 0x10000>; }; @@ -1210,6 +1210,19 @@ reg = <0x32e50200 0x200>; }; + pcie_phy: pcie-phy@32f00000 { + compatible = "fsl,imx8mm-pcie-phy"; + reg = <0x32f00000 0x10000>; + clocks = <&clk IMX8MM_CLK_PCIE1_PHY>; + clock-names = "ref"; + assigned-clocks = <&clk IMX8MM_CLK_PCIE1_PHY>; + assigned-clock-rates = <100000000>; + assigned-clock-parents = <&clk IMX8MM_SYS_PLL2_100M>; + resets = <&src IMX8MQ_RESET_PCIEPHY>; + reset-names = "pciephy"; + #phy-cells = <0>; + status = "disabled"; + }; }; dma_apbh: dma-controller@33000000 { @@ -1241,6 +1254,37 @@ status = "disabled"; }; + pcie0: pcie@33800000 { + compatible = "fsl,imx8mm-pcie"; + reg = <0x33800000 0x400000>, <0x1ff00000 0x80000>; + reg-names = "dbi", "config"; + #address-cells = <3>; + #size-cells = <2>; + device_type = "pci"; + bus-range = <0x00 0xff>; + ranges = <0x81000000 0 0x00000000 0x1ff80000 0 0x00010000 /* downstream I/O 64KB */ + 0x82000000 0 0x18000000 0x18000000 0 0x07f00000>; /* non-prefetchable memory */ + num-lanes = <1>; + num-viewport = <4>; + interrupts = <GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "msi"; + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 0 0x7>; + interrupt-map = <0 0 0 1 &gic GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>, + <0 0 0 2 &gic GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH>, + <0 0 0 3 &gic GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>, + <0 0 0 4 &gic GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>; + fsl,max-link-speed = <2>; + linux,pci-domain = <0>; + power-domains = <&pgc_pcie>; + resets = <&src IMX8MQ_RESET_PCIE_CTRL_APPS_EN>, + <&src IMX8MQ_RESET_PCIE_CTRL_APPS_TURNOFF>; + reset-names = "apps", "turnoff"; + phys = <&pcie_phy>; + phy-names = "pcie-phy"; + status = "disabled"; + }; + gpu_3d: gpu@38000000 { compatible = "vivante,gc"; reg = <0x38000000 0x8000>; @@ -1272,6 +1316,22 @@ power-domains = <&pgc_gpu>; }; + vpu_g1: video-codec@38300000 { + compatible = "nxp,imx8mm-vpu-g1"; + reg = <0x38300000 0x10000>; + interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk IMX8MM_CLK_VPU_G1_ROOT>; + power-domains = <&vpu_blk_ctrl IMX8MM_VPUBLK_PD_G1>; + }; + + vpu_g2: video-codec@38310000 { + compatible = "nxp,imx8mq-vpu-g2"; + reg = <0x38310000 0x10000>; + interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk IMX8MM_CLK_VPU_G2_ROOT>; + power-domains = <&vpu_blk_ctrl IMX8MM_VPUBLK_PD_G2>; + }; + vpu_blk_ctrl: blk-ctrl@38330000 { compatible = "fsl,imx8mm-vpu-blk-ctrl", "syscon"; reg = <0x38330000 0x100>; @@ -1282,6 +1342,12 @@ <&clk IMX8MM_CLK_VPU_G2_ROOT>, <&clk IMX8MM_CLK_VPU_H1_ROOT>; clock-names = "g1", "g2", "h1"; + assigned-clocks = <&clk IMX8MM_CLK_VPU_G1>, + <&clk IMX8MM_CLK_VPU_G2>; + assigned-clock-parents = <&clk IMX8MM_VPU_PLL_OUT>, + <&clk IMX8MM_VPU_PLL_OUT>; + assigned-clock-rates = <600000000>, + <600000000>; #power-domain-cells = <1>; }; diff --git a/arch/arm64/boot/dts/freescale/imx8mn-venice-gw7902.dts b/arch/arm64/boot/dts/freescale/imx8mn-venice-gw7902.dts index 236f425e1570..3c0e63d2e82d 100644 --- a/arch/arm64/boot/dts/freescale/imx8mn-venice-gw7902.dts +++ b/arch/arm64/boot/dts/freescale/imx8mn-venice-gw7902.dts @@ -220,6 +220,10 @@ }; }; +&disp_blk_ctrl { + status = "disabled"; +}; + /* off-board header */ &ecspi2 { pinctrl-names = "default"; @@ -251,6 +255,47 @@ }; }; +&gpio1 { + gpio-line-names = "", "", "", "", "", "", "", "", + "", "", "", "", "", "m2_reset", "", "m2_wdis#", + "", "", "", "", "", "", "", "", + "", "", "", "", "", "", "", ""; +}; + +&gpio2 { + gpio-line-names = "", "", "", "", "", "", "", "", + "uart2_en#", "", "", "", "", "", "", "", + "", "", "", "", "", "", "", "", + "", "", "", "", "", "", "", ""; +}; + +&gpio3 { + gpio-line-names = "", "m2_gdis#", "", "", "", "", "", "m2_off#", + "", "", "", "", "", "", "", "", + "", "", "", "", "", "", "", "", + "", "", "", "", "", "", "", ""; +}; + +&gpio4 { + gpio-line-names = "", "", "", "", "", "", "", "", + "", "", "", "", "", "", "", "", + "", "", "", "", "", "app_gpio1", "", "uart1_rs485", + "", "uart1_term", "uart1_half", "app_gpio2", + "mipi_gpio1", "", "", ""; +}; + +&gpio5 { + gpio-line-names = "", "", "", "mipi_gpio4", + "mipi_gpio3", "mipi_gpio2", "", "", + "", "", "", "", "", "", "", "", + "", "", "", "", "", "", "", "", + "", "", "", "", "", "", "", ""; +}; + +&gpu { + status = "disabled"; +}; + &i2c1 { clock-frequency = <100000>; pinctrl-names = "default"; @@ -546,6 +591,10 @@ status = "okay"; }; +&pgc_gpumix { + status = "disabled"; +}; + /* off-board header */ &sai3 { pinctrl-names = "default"; @@ -633,7 +682,7 @@ pinctrl_hog: hoggrp { fsl,pins = < MX8MN_IOMUXC_NAND_CE0_B_GPIO3_IO1 0x40000159 /* M2_GDIS# */ - MX8MN_IOMUXC_GPIO1_IO13_GPIO1_IO13 0x40000041 /* M2_RST# */ + MX8MN_IOMUXC_GPIO1_IO13_GPIO1_IO13 0x40000041 /* M2_RESET */ MX8MN_IOMUXC_NAND_DATA01_GPIO3_IO7 0x40000119 /* M2_OFF# */ MX8MN_IOMUXC_GPIO1_IO15_GPIO1_IO15 0x40000159 /* M2_WDIS# */ MX8MN_IOMUXC_SAI2_RXFS_GPIO4_IO21 0x40000041 /* APP GPIO1 */ diff --git a/arch/arm64/boot/dts/freescale/imx8mn.dtsi b/arch/arm64/boot/dts/freescale/imx8mn.dtsi index b8d49d5f2668..99f0f5026674 100644 --- a/arch/arm64/boot/dts/freescale/imx8mn.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8mn.dtsi @@ -4,6 +4,8 @@ */ #include <dt-bindings/clock/imx8mn-clock.h> +#include <dt-bindings/power/imx8mn-power.h> +#include <dt-bindings/reset/imx8mq-reset.h> #include <dt-bindings/gpio/gpio.h> #include <dt-bindings/input/input.h> #include <dt-bindings/interrupt-controller/arm-gic.h> @@ -640,6 +642,53 @@ interrupts = <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>; #reset-cells = <1>; }; + + gpc: gpc@303a0000 { + compatible = "fsl,imx8mn-gpc"; + reg = <0x303a0000 0x10000>; + interrupt-parent = <&gic>; + interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>; + + pgc { + #address-cells = <1>; + #size-cells = <0>; + + pgc_hsiomix: power-domain@0 { + #power-domain-cells = <0>; + reg = <IMX8MN_POWER_DOMAIN_HSIOMIX>; + clocks = <&clk IMX8MN_CLK_USB_BUS>; + }; + + pgc_otg1: power-domain@1 { + #power-domain-cells = <0>; + reg = <IMX8MN_POWER_DOMAIN_OTG1>; + power-domains = <&pgc_hsiomix>; + }; + + pgc_gpumix: power-domain@2 { + #power-domain-cells = <0>; + reg = <IMX8MN_POWER_DOMAIN_GPUMIX>; + clocks = <&clk IMX8MN_CLK_GPU_CORE_ROOT>, + <&clk IMX8MN_CLK_GPU_SHADER>, + <&clk IMX8MN_CLK_GPU_BUS_ROOT>, + <&clk IMX8MN_CLK_GPU_AHB>; + resets = <&src IMX8MQ_RESET_GPU_RESET>; + }; + + pgc_dispmix: power-domain@3 { + #power-domain-cells = <0>; + reg = <IMX8MN_POWER_DOMAIN_DISPMIX>; + clocks = <&clk IMX8MN_CLK_DISP_AXI_ROOT>, + <&clk IMX8MN_CLK_DISP_APB_ROOT>; + }; + + pgc_mipi: power-domain@4 { + #power-domain-cells = <0>; + reg = <IMX8MN_POWER_DOMAIN_MIPI>; + power-domains = <&pgc_dispmix>; + }; + }; + }; }; aips2: bus@30400000 { @@ -989,6 +1038,34 @@ #size-cells = <1>; ranges; + disp_blk_ctrl: blk-ctrl@32e28000 { + compatible = "fsl,imx8mn-disp-blk-ctrl", "syscon"; + reg = <0x32e28000 0x100>; + power-domains = <&pgc_dispmix>, <&pgc_dispmix>, + <&pgc_dispmix>, <&pgc_mipi>, + <&pgc_mipi>; + power-domain-names = "bus", "isi", + "lcdif", "mipi-dsi", + "mipi-csi"; + clocks = <&clk IMX8MN_CLK_DISP_AXI>, + <&clk IMX8MN_CLK_DISP_APB>, + <&clk IMX8MN_CLK_DISP_AXI_ROOT>, + <&clk IMX8MN_CLK_DISP_APB_ROOT>, + <&clk IMX8MN_CLK_DISP_AXI_ROOT>, + <&clk IMX8MN_CLK_DISP_APB_ROOT>, + <&clk IMX8MN_CLK_DISP_PIXEL_ROOT>, + <&clk IMX8MN_CLK_DSI_CORE>, + <&clk IMX8MN_CLK_DSI_PHY_REF>, + <&clk IMX8MN_CLK_CSI1_PHY_REF>, + <&clk IMX8MN_CLK_CAMERA_PIXEL_ROOT>; + clock-names = "disp_axi", "disp_apb", + "disp_axi_root", "disp_apb_root", + "lcdif-axi", "lcdif-apb", "lcdif-pix", + "dsi-pclk", "dsi-ref", + "csi-aclk", "csi-pclk"; + #power-domain-cells = <1>; + }; + usbotg1: usb@32e40000 { compatible = "fsl,imx8mn-usb", "fsl,imx7d-usb"; reg = <0x32e40000 0x200>; @@ -999,6 +1076,7 @@ assigned-clock-parents = <&clk IMX8MN_SYS_PLL2_500M>; phys = <&usbphynop1>; fsl,usbmisc = <&usbmisc1 0>; + power-domains = <&pgc_otg1>; status = "disabled"; }; @@ -1038,6 +1116,32 @@ status = "disabled"; }; + gpu: gpu@38000000 { + compatible = "vivante,gc"; + reg = <0x38000000 0x8000>; + interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk IMX8MN_CLK_GPU_AHB>, + <&clk IMX8MN_CLK_GPU_BUS_ROOT>, + <&clk IMX8MN_CLK_GPU_CORE_ROOT>, + <&clk IMX8MN_CLK_GPU_SHADER>; + clock-names = "reg", "bus", "core", "shader"; + assigned-clocks = <&clk IMX8MN_CLK_GPU_CORE>, + <&clk IMX8MN_CLK_GPU_SHADER>, + <&clk IMX8MN_CLK_GPU_AXI>, + <&clk IMX8MN_CLK_GPU_AHB>, + <&clk IMX8MN_GPU_PLL>; + assigned-clock-parents = <&clk IMX8MN_GPU_PLL_OUT>, + <&clk IMX8MN_GPU_PLL_OUT>, + <&clk IMX8MN_SYS_PLL1_800M>, + <&clk IMX8MN_SYS_PLL1_800M>; + assigned-clock-rates = <400000000>, + <400000000>, + <800000000>, + <400000000>, + <1200000000>; + power-domains = <&pgc_gpumix>; + }; + gic: interrupt-controller@38800000 { compatible = "arm,gic-v3"; reg = <0x38800000 0x10000>, diff --git a/arch/arm64/boot/dts/freescale/imx8mp-evk.dts b/arch/arm64/boot/dts/freescale/imx8mp-evk.dts index 2eb943210678..4c3ac4214a2c 100644 --- a/arch/arm64/boot/dts/freescale/imx8mp-evk.dts +++ b/arch/arm64/boot/dts/freescale/imx8mp-evk.dts @@ -294,9 +294,46 @@ reg = <0x20>; gpio-controller; #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pca6416_int>; + interrupt-parent = <&gpio1>; + interrupts = <12 IRQ_TYPE_LEVEL_LOW>; + gpio-line-names = "EXT_PWREN1", + "EXT_PWREN2", + "CAN1/I2C5_SEL", + "PDM/CAN2_SEL", + "FAN_EN", + "PWR_MEAS_IO1", + "PWR_MEAS_IO2", + "EXP_P0_7", + "EXP_P1_0", + "EXP_P1_1", + "EXP_P1_2", + "EXP_P1_3", + "EXP_P1_4", + "EXP_P1_5", + "EXP_P1_6", + "EXP_P1_7"; }; }; +/* I2C on expansion connector J22. */ +&i2c5 { + clock-frequency = <100000>; /* Lower clock speed for external bus. */ + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c5>; + status = "disabled"; /* can1 pins conflict with i2c5 */ + + /* GPIO 2 of PCA6416 is used to switch between CAN1 and I2C5 functions: + * LOW: CAN1 (default, pull-down) + * HIGH: I2C5 + * You need to set it to high to enable I2C5 (for example, add gpio-hog + * in pca6416 node). + */ +}; + &snvs_pwrkey { status = "okay"; }; @@ -442,12 +479,25 @@ >; }; + pinctrl_i2c5: i2c5grp { + fsl,pins = < + MX8MP_IOMUXC_SPDIF_RX__I2C5_SDA 0x400001c3 + MX8MP_IOMUXC_SPDIF_TX__I2C5_SCL 0x400001c3 + >; + }; + pinctrl_pmic: pmicgrp { fsl,pins = < MX8MP_IOMUXC_GPIO1_IO03__GPIO1_IO03 0x000001c0 >; }; + pinctrl_pca6416_int: pca6416_int_grp { + fsl,pins = < + MX8MP_IOMUXC_GPIO1_IO12__GPIO1_IO12 0x146 /* Input pull-up. */ + >; + }; + pinctrl_reg_usdhc2_vmmc: regusdhc2vmmcgrp { fsl,pins = < MX8MP_IOMUXC_SD2_RESET_B__GPIO2_IO19 0x41 diff --git a/arch/arm64/boot/dts/freescale/imx8mp-phycore-som.dtsi b/arch/arm64/boot/dts/freescale/imx8mp-phycore-som.dtsi index fc178eebf8aa..79b290a002c1 100644 --- a/arch/arm64/boot/dts/freescale/imx8mp-phycore-som.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8mp-phycore-som.dtsi @@ -60,6 +60,7 @@ ti,tx-internal-delay = <DP83867_RGMIIDCTL_2_00_NS>; ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>; ti,clk-output-sel = <DP83867_CLK_O_SEL_OFF>; + ti,min-output-impedance; enet-phy-lane-no-swap; }; }; @@ -113,6 +114,8 @@ regulator-boot-on; regulator-always-on; regulator-ramp-delay = <3125>; + nxp,dvs-run-voltage = <950000>; + nxp,dvs-standby-voltage = <850000>; }; buck4: BUCK4 { @@ -167,14 +170,14 @@ regulator-compatible = "LDO4"; regulator-min-microvolt = <800000>; regulator-max-microvolt = <3300000>; - regulator-boot-on; - regulator-always-on; }; ldo5: LDO5 { regulator-compatible = "LDO5"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <3300000>; + regulator-boot-on; + regulator-always-on; }; }; }; @@ -194,6 +197,8 @@ /* eMMC */ &usdhc3 { + assigned-clocks = <&clk IMX8MP_CLK_USDHC3_ROOT>; + assigned-clock-rates = <400000000>; pinctrl-names = "default", "state_100mhz", "state_200mhz"; pinctrl-0 = <&pinctrl_usdhc3>; pinctrl-1 = <&pinctrl_usdhc3_100mhz>; @@ -221,12 +226,12 @@ MX8MP_IOMUXC_SAI1_RXD7__ENET1_RGMII_RD3 0x91 MX8MP_IOMUXC_SAI1_TXC__ENET1_RGMII_RXC 0x91 MX8MP_IOMUXC_SAI1_TXFS__ENET1_RGMII_RX_CTL 0x91 - MX8MP_IOMUXC_SAI1_TXD0__ENET1_RGMII_TD0 0x1f - MX8MP_IOMUXC_SAI1_TXD1__ENET1_RGMII_TD1 0x1f - MX8MP_IOMUXC_SAI1_TXD2__ENET1_RGMII_TD2 0x1f - MX8MP_IOMUXC_SAI1_TXD3__ENET1_RGMII_TD3 0x1f - MX8MP_IOMUXC_SAI1_TXD4__ENET1_RGMII_TX_CTL 0x1f - MX8MP_IOMUXC_SAI1_TXD5__ENET1_RGMII_TXC 0x1f + MX8MP_IOMUXC_SAI1_TXD0__ENET1_RGMII_TD0 0x12 + MX8MP_IOMUXC_SAI1_TXD1__ENET1_RGMII_TD1 0x12 + MX8MP_IOMUXC_SAI1_TXD2__ENET1_RGMII_TD2 0x14 + MX8MP_IOMUXC_SAI1_TXD3__ENET1_RGMII_TD3 0x14 + MX8MP_IOMUXC_SAI1_TXD4__ENET1_RGMII_TX_CTL 0x14 + MX8MP_IOMUXC_SAI1_TXD5__ENET1_RGMII_TXC 0x14 MX8MP_IOMUXC_GPIO1_IO15__GPIO1_IO15 0x11 >; }; @@ -298,21 +303,21 @@ fsl,pins = < MX8MP_IOMUXC_NAND_WE_B__USDHC3_CLK 0x196 MX8MP_IOMUXC_NAND_WP_B__USDHC3_CMD 0x1d6 - MX8MP_IOMUXC_NAND_DATA04__USDHC3_DATA0 0x1d6 - MX8MP_IOMUXC_NAND_DATA05__USDHC3_DATA1 0x1d6 - MX8MP_IOMUXC_NAND_DATA06__USDHC3_DATA2 0x1d6 - MX8MP_IOMUXC_NAND_DATA07__USDHC3_DATA3 0x1d6 - MX8MP_IOMUXC_NAND_RE_B__USDHC3_DATA4 0x1d6 - MX8MP_IOMUXC_NAND_CE2_B__USDHC3_DATA5 0x1d6 - MX8MP_IOMUXC_NAND_CE3_B__USDHC3_DATA6 0x1d6 - MX8MP_IOMUXC_NAND_CLE__USDHC3_DATA7 0x1d6 + MX8MP_IOMUXC_NAND_DATA04__USDHC3_DATA0 0x1d2 + MX8MP_IOMUXC_NAND_DATA05__USDHC3_DATA1 0x1d2 + MX8MP_IOMUXC_NAND_DATA06__USDHC3_DATA2 0x1d2 + MX8MP_IOMUXC_NAND_DATA07__USDHC3_DATA3 0x1d2 + MX8MP_IOMUXC_NAND_RE_B__USDHC3_DATA4 0x1d2 + MX8MP_IOMUXC_NAND_CE2_B__USDHC3_DATA5 0x1d2 + MX8MP_IOMUXC_NAND_CE3_B__USDHC3_DATA6 0x1d2 + MX8MP_IOMUXC_NAND_CLE__USDHC3_DATA7 0x1d2 MX8MP_IOMUXC_NAND_CE1_B__USDHC3_STROBE 0x196 >; }; pinctrl_wdog: wdoggrp { fsl,pins = < - MX8MP_IOMUXC_GPIO1_IO02__WDOG1_WDOG_B 0xc6 + MX8MP_IOMUXC_GPIO1_IO02__WDOG1_WDOG_B 0xe6 >; }; }; diff --git a/arch/arm64/boot/dts/freescale/imx8mp.dtsi b/arch/arm64/boot/dts/freescale/imx8mp.dtsi index 6b840c05dd77..3f8703f3ba5b 100644 --- a/arch/arm64/boot/dts/freescale/imx8mp.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8mp.dtsi @@ -958,6 +958,7 @@ assigned-clocks = <&clk IMX8MP_CLK_USB_PHY_REF>; assigned-clock-parents = <&clk IMX8MP_CLK_24M>; #phy-cells = <0>; + status = "disabled"; }; usb3_1: usb@32f10108 { diff --git a/arch/arm64/boot/dts/freescale/imx8mq-evk.dts b/arch/arm64/boot/dts/freescale/imx8mq-evk.dts index a1b7582f3ecf..99fed35168eb 100644 --- a/arch/arm64/boot/dts/freescale/imx8mq-evk.dts +++ b/arch/arm64/boot/dts/freescale/imx8mq-evk.dts @@ -27,6 +27,17 @@ clock-frequency = <100000000>; }; + reg_pcie1: regulator-pcie { + compatible = "regulator-fixed"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pcie1_reg>; + regulator-name = "MPCIE_3V3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpio = <&gpio5 10 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + reg_usdhc2_vmmc: regulator-vsd-3v3 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_reg_usdhc2>; @@ -123,6 +134,7 @@ &ddrc { operating-points-v2 = <&ddrc_opp_table>; + status = "okay"; ddrc_opp_table: opp-table { compatible = "operating-points-v2"; @@ -327,6 +339,20 @@ status = "okay"; }; +&pcie1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pcie1>; + reset-gpio = <&gpio5 12 GPIO_ACTIVE_LOW>; + clocks = <&clk IMX8MQ_CLK_PCIE2_ROOT>, + <&clk IMX8MQ_CLK_PCIE2_AUX>, + <&clk IMX8MQ_CLK_PCIE2_PHY>, + <&pcie0_refclk>; + clock-names = "pcie", "pcie_aux", "pcie_phy", "pcie_bus"; + vpcie-supply = <®_pcie1>; + vph-supply = <&vgen5_reg>; + status = "okay"; +}; + &pgc_gpu { power-supply = <&sw1a_reg>; }; @@ -482,6 +508,19 @@ >; }; + pinctrl_pcie1: pcie1grp { + fsl,pins = < + MX8MQ_IOMUXC_I2C4_SDA_PCIE2_CLKREQ_B 0x76 + MX8MQ_IOMUXC_ECSPI2_MISO_GPIO5_IO12 0x16 + >; + }; + + pinctrl_pcie1_reg: pcie1reggrp { + fsl,pins = < + MX8MQ_IOMUXC_ECSPI2_SCLK_GPIO5_IO10 0x16 + >; + }; + pinctrl_qspi: qspigrp { fsl,pins = < MX8MQ_IOMUXC_NAND_ALE_QSPI_A_SCLK 0x82 diff --git a/arch/arm64/boot/dts/freescale/imx8mq-librem5.dtsi b/arch/arm64/boot/dts/freescale/imx8mq-librem5.dtsi index 2d4a472af6a9..05c16376b4d8 100644 --- a/arch/arm64/boot/dts/freescale/imx8mq-librem5.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8mq-librem5.dtsi @@ -278,6 +278,7 @@ &ddrc { operating-points-v2 = <&ddrc_opp_table>; + status = "okay"; ddrc_opp_table: opp-table { compatible = "operating-points-v2"; diff --git a/arch/arm64/boot/dts/freescale/imx8mq-mnt-reform2.dts b/arch/arm64/boot/dts/freescale/imx8mq-mnt-reform2.dts index fa721a13de20..94a13cb500e6 100644 --- a/arch/arm64/boot/dts/freescale/imx8mq-mnt-reform2.dts +++ b/arch/arm64/boot/dts/freescale/imx8mq-mnt-reform2.dts @@ -14,6 +14,30 @@ compatible = "mntre,reform2", "boundary,imx8mq-nitrogen8m-som", "fsl,imx8mq"; chassis-type = "laptop"; + backlight: backlight { + compatible = "pwm-backlight"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_backlight>; + pwms = <&pwm2 0 10000>; + power-supply = <®_main_usb>; + enable-gpios = <&gpio1 10 GPIO_ACTIVE_HIGH>; + brightness-levels = <0 32 64 128 160 200 255>; + default-brightness-level = <6>; + }; + + panel { + compatible = "innolux,n125hce-gn1", "simple-panel"; + power-supply = <®_main_3v3>; + backlight = <&backlight>; + no-hpd; + + port { + panel_in: endpoint { + remote-endpoint = <&edp_bridge_out>; + }; + }; + }; + pcie1_refclk: clock-pcie1-refclk { compatible = "fixed-clock"; #clock-cells = <0>; @@ -42,6 +66,22 @@ vin-supply = <®_main_5v>; }; + reg_main_1v8: regulator-main-1v8 { + compatible = "regulator-fixed"; + regulator-name = "1V8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + vin-supply = <®_main_3v3>; + }; + + reg_main_1v2: regulator-main-1v2 { + compatible = "regulator-fixed"; + regulator-name = "1V2"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + vin-supply = <®_main_5v>; + }; + sound { compatible = "fsl,imx-audio-wm8960"; audio-cpu = <&sai2>; @@ -61,6 +101,13 @@ }; }; +&dphy { + assigned-clocks = <&clk IMX8MQ_CLK_DSI_PHY_REF>; + assigned-clock-parents = <&clk IMX8MQ_SYS1_PLL_800M>; + assigned-clock-rates = <25000000>; + status = "okay"; +}; + &fec1 { status = "okay"; }; @@ -84,6 +131,67 @@ }; }; +&i2c4 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c4>; + clock-frequency = <400000>; + status = "okay"; + + edp_bridge: bridge@2c { + compatible = "ti,sn65dsi86"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_edp_bridge>; + reg = <0x2c>; + enable-gpios = <&gpio3 20 GPIO_ACTIVE_HIGH>; + vccio-supply = <®_main_1v8>; + vpll-supply = <®_main_1v8>; + vcca-supply = <®_main_1v2>; + vcc-supply = <®_main_1v2>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + edp_bridge_in: endpoint { + remote-endpoint = <&mipi_dsi_out>; + }; + }; + + port@1 { + reg = <1>; + + edp_bridge_out: endpoint { + remote-endpoint = <&panel_in>; + }; + }; + }; + }; +}; + +&lcdif { + assigned-clocks = <&clk IMX8MQ_CLK_LCDIF_PIXEL>; + assigned-clock-parents = <&clk IMX8MQ_SYS1_PLL_800M>; + /delete-property/assigned-clock-rates; + status = "okay"; +}; + +&mipi_dsi { + status = "okay"; + + ports { + port@1 { + reg = <1>; + + mipi_dsi_out: endpoint { + remote-endpoint = <&edp_bridge_in>; + }; + }; + }; +}; + &pcie1 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_pcie1>; @@ -96,6 +204,13 @@ status = "okay"; }; +&pwm2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pwm2>; + status = "okay"; +}; + + ®_1p8v { vin-supply = <®_main_5v>; }; @@ -169,10 +284,29 @@ }; &iomuxc { + pinctrl_backlight: backlightgrp { + fsl,pins = < + MX8MQ_IOMUXC_GPIO1_IO10_GPIO1_IO10 0x3 + >; + }; + + pinctrl_edp_bridge: edpbridgegrp { + fsl,pins = < + MX8MQ_IOMUXC_SAI5_RXC_GPIO3_IO20 0x1 + >; + }; + pinctrl_i2c3: i2c3grp { fsl,pins = < - MX8MQ_IOMUXC_I2C3_SCL_I2C3_SCL 0x4000007f - MX8MQ_IOMUXC_I2C3_SDA_I2C3_SDA 0x4000007f + MX8MQ_IOMUXC_I2C3_SCL_I2C3_SCL 0x40000022 + MX8MQ_IOMUXC_I2C3_SDA_I2C3_SDA 0x40000022 + >; + }; + + pinctrl_i2c4: i2c4grp { + fsl,pins = < + MX8MQ_IOMUXC_I2C4_SCL_I2C4_SCL 0x40000022 + MX8MQ_IOMUXC_I2C4_SDA_I2C4_SDA 0x40000022 >; }; @@ -182,6 +316,12 @@ >; }; + pinctrl_pwm2: pwm2grp { + fsl,pins = < + MX8MQ_IOMUXC_SPDIF_RX_PWM2_OUT 0x3 + >; + }; + pinctrl_sai2: sai2grp { fsl,pins = < MX8MQ_IOMUXC_SAI2_RXD0_SAI2_RX_DATA0 0xd6 diff --git a/arch/arm64/boot/dts/freescale/imx8mq-tqma8mq.dtsi b/arch/arm64/boot/dts/freescale/imx8mq-tqma8mq.dtsi index 8aedcddfeab8..38ffcd145b33 100644 --- a/arch/arm64/boot/dts/freescale/imx8mq-tqma8mq.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8mq-tqma8mq.dtsi @@ -272,10 +272,6 @@ status = "okay"; }; -&vpu { - status = "okay"; -}; - /* Attention: wdog reset forcing POR needs baseboard support */ &wdog1 { status = "okay"; diff --git a/arch/arm64/boot/dts/freescale/imx8mq.dtsi b/arch/arm64/boot/dts/freescale/imx8mq.dtsi index e92ebb6147e6..5b3e849f554d 100644 --- a/arch/arm64/boot/dts/freescale/imx8mq.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8mq.dtsi @@ -737,7 +737,21 @@ pgc_vpu: power-domain@6 { #power-domain-cells = <0>; reg = <IMX8M_POWER_DOMAIN_VPU>; - clocks = <&clk IMX8MQ_CLK_VPU_DEC_ROOT>; + clocks = <&clk IMX8MQ_CLK_VPU_DEC_ROOT>, + <&clk IMX8MQ_CLK_VPU_G1_ROOT>, + <&clk IMX8MQ_CLK_VPU_G2_ROOT>; + assigned-clocks = <&clk IMX8MQ_CLK_VPU_G1>, + <&clk IMX8MQ_CLK_VPU_G2>, + <&clk IMX8MQ_CLK_VPU_BUS>, + <&clk IMX8MQ_VPU_PLL_BYPASS>; + assigned-clock-parents = <&clk IMX8MQ_VPU_PLL_OUT>, + <&clk IMX8MQ_VPU_PLL_OUT>, + <&clk IMX8MQ_SYS1_PLL_800M>, + <&clk IMX8MQ_VPU_PLL>; + assigned-clock-rates = <600000000>, + <600000000>, + <800000000>, + <0>; }; pgc_disp: power-domain@7 { @@ -1457,30 +1471,31 @@ status = "disabled"; }; - vpu: video-codec@38300000 { - compatible = "nxp,imx8mq-vpu"; - reg = <0x38300000 0x10000>, - <0x38310000 0x10000>, - <0x38320000 0x10000>; - reg-names = "g1", "g2", "ctrl"; - interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>; - interrupt-names = "g1", "g2"; + vpu_g1: video-codec@38300000 { + compatible = "nxp,imx8mq-vpu-g1"; + reg = <0x38300000 0x10000>; + interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk IMX8MQ_CLK_VPU_G1_ROOT>; + power-domains = <&vpu_blk_ctrl IMX8MQ_VPUBLK_PD_G1>; + }; + + vpu_g2: video-codec@38310000 { + compatible = "nxp,imx8mq-vpu-g2"; + reg = <0x38310000 0x10000>; + interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk IMX8MQ_CLK_VPU_G2_ROOT>; + power-domains = <&vpu_blk_ctrl IMX8MQ_VPUBLK_PD_G2>; + }; + + vpu_blk_ctrl: blk-ctrl@38320000 { + compatible = "fsl,imx8mq-vpu-blk-ctrl"; + reg = <0x38320000 0x100>; + power-domains = <&pgc_vpu>, <&pgc_vpu>, <&pgc_vpu>; + power-domain-names = "bus", "g1", "g2"; clocks = <&clk IMX8MQ_CLK_VPU_G1_ROOT>, - <&clk IMX8MQ_CLK_VPU_G2_ROOT>, - <&clk IMX8MQ_CLK_VPU_DEC_ROOT>; - clock-names = "g1", "g2", "bus"; - assigned-clocks = <&clk IMX8MQ_CLK_VPU_G1>, - <&clk IMX8MQ_CLK_VPU_G2>, - <&clk IMX8MQ_CLK_VPU_BUS>, - <&clk IMX8MQ_VPU_PLL_BYPASS>; - assigned-clock-parents = <&clk IMX8MQ_VPU_PLL_OUT>, - <&clk IMX8MQ_VPU_PLL_OUT>, - <&clk IMX8MQ_SYS1_PLL_800M>, - <&clk IMX8MQ_VPU_PLL>; - assigned-clock-rates = <600000000>, <600000000>, - <800000000>, <0>; - power-domains = <&pgc_vpu>; + <&clk IMX8MQ_CLK_VPU_G2_ROOT>; + clock-names = "g1", "g2"; + #power-domain-cells = <1>; }; pcie0: pcie@33800000 { @@ -1579,6 +1594,7 @@ <&clk IMX8MQ_DRAM_PLL_OUT>, <&clk IMX8MQ_CLK_DRAM_ALT>, <&clk IMX8MQ_CLK_DRAM_APB>; + status = "disabled"; }; ddr-pmu@3d800000 { diff --git a/arch/arm64/boot/dts/freescale/imx8qm-ss-conn.dtsi b/arch/arm64/boot/dts/freescale/imx8qm-ss-conn.dtsi index 42637a45701c..ec1639174e2e 100644 --- a/arch/arm64/boot/dts/freescale/imx8qm-ss-conn.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8qm-ss-conn.dtsi @@ -19,3 +19,7 @@ &usdhc2 { compatible = "fsl,imx8qm-usdhc", "fsl,imx8qxp-usdhc", "fsl,imx7d-usdhc"; }; + +&usdhc3 { + compatible = "fsl,imx8qm-usdhc", "fsl,imx8qxp-usdhc", "fsl,imx7d-usdhc"; +}; diff --git a/arch/arm64/boot/dts/freescale/imx8qm-ss-lsio.dtsi b/arch/arm64/boot/dts/freescale/imx8qm-ss-lsio.dtsi index 30896610c654..669aa14ce9f7 100644 --- a/arch/arm64/boot/dts/freescale/imx8qm-ss-lsio.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8qm-ss-lsio.dtsi @@ -56,6 +56,14 @@ compatible = "fsl,imx8-mu-scu", "fsl,imx8qm-mu", "fsl,imx6sx-mu"; }; +&lsio_mu5 { + compatible = "fsl,imx8qm-mu", "fsl,imx6sx-mu"; +}; + +&lsio_mu6 { + compatible = "fsl,imx8qm-mu", "fsl,imx6sx-mu"; +}; + &lsio_mu13 { compatible = "fsl,imx8qm-mu", "fsl,imx6sx-mu"; }; diff --git a/arch/arm64/boot/dts/freescale/imx8qm.dtsi b/arch/arm64/boot/dts/freescale/imx8qm.dtsi index 4a7c017b5f31..be8c76a0554c 100644 --- a/arch/arm64/boot/dts/freescale/imx8qm.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8qm.dtsi @@ -20,6 +20,9 @@ mmc1 = &usdhc2; mmc2 = &usdhc3; serial0 = &lpuart0; + serial1 = &lpuart1; + serial2 = &lpuart2; + serial3 = &lpuart3; }; cpus { @@ -54,7 +57,7 @@ A53_0: cpu@0 { device_type = "cpu"; - compatible = "arm,cortex-a53", "arm,armv8"; + compatible = "arm,cortex-a53"; reg = <0x0 0x0>; enable-method = "psci"; i-cache-size = <0x8000>; @@ -68,7 +71,7 @@ A53_1: cpu@1 { device_type = "cpu"; - compatible = "arm,cortex-a53", "arm,armv8"; + compatible = "arm,cortex-a53"; reg = <0x0 0x1>; enable-method = "psci"; i-cache-size = <0x8000>; @@ -82,7 +85,7 @@ A53_2: cpu@2 { device_type = "cpu"; - compatible = "arm,cortex-a53", "arm,armv8"; + compatible = "arm,cortex-a53"; reg = <0x0 0x2>; enable-method = "psci"; i-cache-size = <0x8000>; @@ -96,7 +99,7 @@ A53_3: cpu@3 { device_type = "cpu"; - compatible = "arm,cortex-a53", "arm,armv8"; + compatible = "arm,cortex-a53"; reg = <0x0 0x3>; enable-method = "psci"; i-cache-size = <0x8000>; @@ -110,7 +113,7 @@ A72_0: cpu@100 { device_type = "cpu"; - compatible = "arm,cortex-a72", "arm,armv8"; + compatible = "arm,cortex-a72"; reg = <0x0 0x100>; enable-method = "psci"; i-cache-size = <0xC000>; @@ -124,7 +127,7 @@ A72_1: cpu@101 { device_type = "cpu"; - compatible = "arm,cortex-a72", "arm,armv8"; + compatible = "arm,cortex-a72"; reg = <0x0 0x101>; enable-method = "psci"; next-level-cache = <&A72_L2>; @@ -201,6 +204,9 @@ compatible = "fsl,imx8qm-iomuxc"; }; + rtc: rtc { + compatible = "fsl,imx8qxp-sc-rtc"; + }; }; /* sorted in register address */ diff --git a/arch/arm64/boot/dts/freescale/imx8qxp-ss-adma.dtsi b/arch/arm64/boot/dts/freescale/imx8qxp-ss-adma.dtsi index dc1daa8dc72f..7bae516004bf 100644 --- a/arch/arm64/boot/dts/freescale/imx8qxp-ss-adma.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8qxp-ss-adma.dtsi @@ -5,19 +5,19 @@ */ &lpuart0 { - compatible = "fsl,imx8qxp-lpuart", "fsl,imx7ulp-lpuart"; + compatible = "fsl,imx8qxp-lpuart"; }; &lpuart1 { - compatible = "fsl,imx8qxp-lpuart", "fsl,imx7ulp-lpuart"; + compatible = "fsl,imx8qxp-lpuart"; }; &lpuart2 { - compatible = "fsl,imx8qxp-lpuart", "fsl,imx7ulp-lpuart"; + compatible = "fsl,imx8qxp-lpuart"; }; &lpuart3 { - compatible = "fsl,imx8qxp-lpuart", "fsl,imx7ulp-lpuart"; + compatible = "fsl,imx8qxp-lpuart"; }; &i2c0 { diff --git a/arch/arm64/boot/dts/freescale/imx8qxp-ss-lsio.dtsi b/arch/arm64/boot/dts/freescale/imx8qxp-ss-lsio.dtsi index 11395479ffc0..8e2152c6eb88 100644 --- a/arch/arm64/boot/dts/freescale/imx8qxp-ss-lsio.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8qxp-ss-lsio.dtsi @@ -56,6 +56,14 @@ compatible = "fsl,imx8-mu-scu", "fsl,imx8qxp-mu", "fsl,imx6sx-mu"; }; +&lsio_mu5 { + compatible = "fsl,imx8qxp-mu", "fsl,imx6sx-mu"; +}; + +&lsio_mu6 { + compatible = "fsl,imx8qxp-mu", "fsl,imx6sx-mu"; +}; + &lsio_mu13 { compatible = "fsl,imx8qxp-mu", "fsl,imx6sx-mu"; }; diff --git a/arch/arm64/boot/dts/freescale/mba8mx.dtsi b/arch/arm64/boot/dts/freescale/mba8mx.dtsi index ce6d5bdba0a8..c2f0f1a1566c 100644 --- a/arch/arm64/boot/dts/freescale/mba8mx.dtsi +++ b/arch/arm64/boot/dts/freescale/mba8mx.dtsi @@ -66,6 +66,12 @@ }; }; + pcie0_refclk: pcie0-refclk { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <100000000>; + }; + reg_hub_vbus: regulator-hub-vbus { compatible = "regulator-fixed"; regulator-name = "MBA8MX_HUB_VBUS"; diff --git a/arch/arm64/boot/dts/intel/socfpga_agilex.dtsi b/arch/arm64/boot/dts/intel/socfpga_agilex.dtsi index f4270cf18996..c78371703e76 100644 --- a/arch/arm64/boot/dts/intel/socfpga_agilex.dtsi +++ b/arch/arm64/boot/dts/intel/socfpga_agilex.dtsi @@ -300,7 +300,7 @@ status = "disabled"; }; - mmc: dwmmc0@ff808000 { + mmc: mmc@ff808000 { #address-cells = <1>; #size-cells = <0>; compatible = "altr,socfpga-dw-mshc"; @@ -337,7 +337,7 @@ reg = <0xffe00000 0x40000>; }; - pdma: pdma@ffda0000 { + pdma: dma-controller@ffda0000 { compatible = "arm,pl330", "arm,primecell"; reg = <0xffda0000 0x1000>; interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>, @@ -510,6 +510,7 @@ resets = <&rst USB0_RESET>, <&rst USB0_OCP_RESET>; reset-names = "dwc2", "dwc2-ecc"; clocks = <&clkmgr AGILEX_USB_CLK>; + clock-names = "otg"; iommus = <&smmu 6>; status = "disabled"; }; diff --git a/arch/arm64/boot/dts/intel/socfpga_agilex_socdk.dts b/arch/arm64/boot/dts/intel/socfpga_agilex_socdk.dts index 0f7a0ba344be..26cd3c121757 100644 --- a/arch/arm64/boot/dts/intel/socfpga_agilex_socdk.dts +++ b/arch/arm64/boot/dts/intel/socfpga_agilex_socdk.dts @@ -6,6 +6,7 @@ / { model = "SoCFPGA Agilex SoCDK"; + compatible = "intel,socfpga-agilex-socdk", "intel,socfpga-agilex"; aliases { serial0 = &uart0; @@ -20,17 +21,17 @@ leds { compatible = "gpio-leds"; - hps0 { + led0 { label = "hps_led0"; gpios = <&portb 20 GPIO_ACTIVE_HIGH>; }; - hps1 { + led1 { label = "hps_led1"; gpios = <&portb 19 GPIO_ACTIVE_HIGH>; }; - hps2 { + led2 { label = "hps_led2"; gpios = <&portb 21 GPIO_ACTIVE_HIGH>; }; diff --git a/arch/arm64/boot/dts/intel/socfpga_agilex_socdk_nand.dts b/arch/arm64/boot/dts/intel/socfpga_agilex_socdk_nand.dts index 57f83481f551..51f83f96ec65 100644 --- a/arch/arm64/boot/dts/intel/socfpga_agilex_socdk_nand.dts +++ b/arch/arm64/boot/dts/intel/socfpga_agilex_socdk_nand.dts @@ -6,6 +6,7 @@ / { model = "SoCFPGA Agilex SoCDK"; + compatible = "intel,socfpga-agilex-socdk", "intel,socfpga-agilex"; aliases { serial0 = &uart0; diff --git a/arch/arm64/boot/dts/intel/socfpga_n5x_socdk.dts b/arch/arm64/boot/dts/intel/socfpga_n5x_socdk.dts index f3c1310dae0a..62c66e52b656 100644 --- a/arch/arm64/boot/dts/intel/socfpga_n5x_socdk.dts +++ b/arch/arm64/boot/dts/intel/socfpga_n5x_socdk.dts @@ -6,6 +6,7 @@ / { model = "eASIC N5X SoCDK"; + compatible = "intel,n5x-socdk", "intel,socfpga-agilex"; aliases { serial0 = &uart0; @@ -23,6 +24,15 @@ /* We expect the bootloader to fill in the reg */ reg = <0 0 0 0>; }; + + soc { + sdram_edac: memory-controller@f87f8000 { + compatible = "snps,ddrc-3.80a"; + reg = <0xf87f8000 0x400>; + interrupts = <0 175 4>; + status = "okay"; + }; + }; }; &clkmgr { diff --git a/arch/arm64/boot/dts/lg/lg1312.dtsi b/arch/arm64/boot/dts/lg/lg1312.dtsi index 081fe7a9f605..bec97480a960 100644 --- a/arch/arm64/boot/dts/lg/lg1312.dtsi +++ b/arch/arm64/boot/dts/lg/lg1312.dtsi @@ -182,12 +182,13 @@ clocks = <&clk_bus>; clock-names = "apb_pclk"; }; - dmac0: dma@c1128000 { + dmac0: dma-controller@c1128000 { compatible = "arm,pl330", "arm,primecell"; reg = <0x0 0xc1128000 0x1000>; interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clk_bus>; clock-names = "apb_pclk"; + #dma-cells = <1>; }; gpio0: gpio@fd400000 { #gpio-cells = <2>; diff --git a/arch/arm64/boot/dts/lg/lg1313.dtsi b/arch/arm64/boot/dts/lg/lg1313.dtsi index 604bb6975337..ada3d4dc6305 100644 --- a/arch/arm64/boot/dts/lg/lg1313.dtsi +++ b/arch/arm64/boot/dts/lg/lg1313.dtsi @@ -182,12 +182,13 @@ clocks = <&clk_bus>; clock-names = "apb_pclk"; }; - dmac0: dma@c1128000 { + dmac0: dma-controller@c1128000 { compatible = "arm,pl330", "arm,primecell"; reg = <0x0 0xc1128000 0x1000>; interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clk_bus>; clock-names = "apb_pclk"; + #dma-cells = <1>; }; gpio0: gpio@fd400000 { #gpio-cells = <2>; diff --git a/arch/arm64/boot/dts/marvell/armada-37xx.dtsi b/arch/arm64/boot/dts/marvell/armada-37xx.dtsi index fb78ef613b29..30233de58bb3 100644 --- a/arch/arm64/boot/dts/marvell/armada-37xx.dtsi +++ b/arch/arm64/boot/dts/marvell/armada-37xx.dtsi @@ -489,6 +489,7 @@ bus-range = <0x00 0xff>; interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>; #interrupt-cells = <1>; + clocks = <&sb_periph_clk 13>; msi-parent = <&pcie0>; msi-controller; /* diff --git a/arch/arm64/boot/dts/mediatek/mt6358.dtsi b/arch/arm64/boot/dts/mediatek/mt6358.dtsi index 95145076b7e6..98f3b0e0c9f6 100644 --- a/arch/arm64/boot/dts/mediatek/mt6358.dtsi +++ b/arch/arm64/boot/dts/mediatek/mt6358.dtsi @@ -2,6 +2,7 @@ /* * Copyright (c) 2020 MediaTek Inc. */ +#include <dt-bindings/input/input.h> &pwrap { pmic: mt6358 { @@ -357,5 +358,16 @@ mt6358rtc: mt6358rtc { compatible = "mediatek,mt6358-rtc"; }; + + mt6358keys: mt6358keys { + compatible = "mediatek,mt6358-keys"; + power { + linux,keycodes = <KEY_POWER>; + wakeup-source; + }; + home { + linux,keycodes = <KEY_HOME>; + }; + }; }; }; diff --git a/arch/arm64/boot/dts/mediatek/mt7986a-rfb.dts b/arch/arm64/boot/dts/mediatek/mt7986a-rfb.dts index 5cd760abff51..21e420829572 100644 --- a/arch/arm64/boot/dts/mediatek/mt7986a-rfb.dts +++ b/arch/arm64/boot/dts/mediatek/mt7986a-rfb.dts @@ -19,7 +19,8 @@ stdout-path = "serial0:115200n8"; }; - memory { + memory@40000000 { + device_type = "memory"; reg = <0 0x40000000 0 0x40000000>; }; }; diff --git a/arch/arm64/boot/dts/mediatek/mt7986a.dtsi b/arch/arm64/boot/dts/mediatek/mt7986a.dtsi index b8da76b6ba47..694acf8f5b70 100644 --- a/arch/arm64/boot/dts/mediatek/mt7986a.dtsi +++ b/arch/arm64/boot/dts/mediatek/mt7986a.dtsi @@ -6,16 +6,18 @@ #include <dt-bindings/interrupt-controller/irq.h> #include <dt-bindings/interrupt-controller/arm-gic.h> +#include <dt-bindings/clock/mt7986-clk.h> / { interrupt-parent = <&gic>; #address-cells = <2>; #size-cells = <2>; - system_clk: dummy40m { + clk40m: oscillator@0 { compatible = "fixed-clock"; clock-frequency = <40000000>; #clock-cells = <0>; + clock-output-names = "clkxtal"; }; cpus { @@ -98,6 +100,18 @@ interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>; }; + infracfg: infracfg@10001000 { + compatible = "mediatek,mt7986-infracfg", "syscon"; + reg = <0 0x10001000 0 0x1000>; + #clock-cells = <1>; + }; + + topckgen: topckgen@1001b000 { + compatible = "mediatek,mt7986-topckgen", "syscon"; + reg = <0 0x1001B000 0 0x1000>; + #clock-cells = <1>; + }; + watchdog: watchdog@1001c000 { compatible = "mediatek,mt7986-wdt", "mediatek,mt6589-wdt"; @@ -107,6 +121,12 @@ status = "disabled"; }; + apmixedsys: apmixedsys@1001e000 { + compatible = "mediatek,mt7986-apmixedsys"; + reg = <0 0x1001E000 0 0x1000>; + #clock-cells = <1>; + }; + pio: pinctrl@1001f000 { compatible = "mediatek,mt7986a-pinctrl"; reg = <0 0x1001f000 0 0x1000>, @@ -128,11 +148,25 @@ #interrupt-cells = <2>; }; + sgmiisys0: syscon@10060000 { + compatible = "mediatek,mt7986-sgmiisys_0", + "syscon"; + reg = <0 0x10060000 0 0x1000>; + #clock-cells = <1>; + }; + + sgmiisys1: syscon@10070000 { + compatible = "mediatek,mt7986-sgmiisys_1", + "syscon"; + reg = <0 0x10070000 0 0x1000>; + #clock-cells = <1>; + }; + trng: trng@1020f000 { compatible = "mediatek,mt7986-rng", "mediatek,mt7623-rng"; reg = <0 0x1020f000 0 0x100>; - clocks = <&system_clk>; + clocks = <&infracfg CLK_INFRA_TRNG_CK>; clock-names = "rng"; status = "disabled"; }; @@ -142,7 +176,13 @@ "mediatek,mt6577-uart"; reg = <0 0x11002000 0 0x400>; interrupts = <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&system_clk>; + clocks = <&infracfg CLK_INFRA_UART0_SEL>, + <&infracfg CLK_INFRA_UART0_CK>; + clock-names = "baud", "bus"; + assigned-clocks = <&topckgen CLK_TOP_UART_SEL>, + <&infracfg CLK_INFRA_UART0_SEL>; + assigned-clock-parents = <&topckgen CLK_TOP_XTAL>, + <&topckgen CLK_TOP_UART_SEL>; status = "disabled"; }; @@ -151,7 +191,11 @@ "mediatek,mt6577-uart"; reg = <0 0x11003000 0 0x400>; interrupts = <GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&system_clk>; + clocks = <&infracfg CLK_INFRA_UART1_SEL>, + <&infracfg CLK_INFRA_UART1_CK>; + clock-names = "baud", "bus"; + assigned-clocks = <&infracfg CLK_INFRA_UART1_SEL>; + assigned-clock-parents = <&topckgen CLK_TOP_F26M_SEL>; status = "disabled"; }; @@ -160,10 +204,24 @@ "mediatek,mt6577-uart"; reg = <0 0x11004000 0 0x400>; interrupts = <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&system_clk>; + clocks = <&infracfg CLK_INFRA_UART2_SEL>, + <&infracfg CLK_INFRA_UART2_CK>; + clock-names = "baud", "bus"; + assigned-clocks = <&infracfg CLK_INFRA_UART2_SEL>; + assigned-clock-parents = <&topckgen CLK_TOP_F26M_SEL>; status = "disabled"; }; + ethsys: syscon@15000000 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "mediatek,mt7986-ethsys", + "syscon"; + reg = <0 0x15000000 0 0x1000>; + #clock-cells = <1>; + #reset-cells = <1>; + }; + }; }; diff --git a/arch/arm64/boot/dts/mediatek/mt7986b-rfb.dts b/arch/arm64/boot/dts/mediatek/mt7986b-rfb.dts index 5fb752edd754..d73467ea3641 100644 --- a/arch/arm64/boot/dts/mediatek/mt7986b-rfb.dts +++ b/arch/arm64/boot/dts/mediatek/mt7986b-rfb.dts @@ -19,7 +19,8 @@ stdout-path = "serial0:115200n8"; }; - memory { + memory@40000000 { + device_type = "memory"; reg = <0 0x40000000 0 0x40000000>; }; }; diff --git a/arch/arm64/boot/dts/mediatek/mt8183.dtsi b/arch/arm64/boot/dts/mediatek/mt8183.dtsi index 00f2ddd245e1..4b08691ed39e 100644 --- a/arch/arm64/boot/dts/mediatek/mt8183.dtsi +++ b/arch/arm64/boot/dts/mediatek/mt8183.dtsi @@ -1594,6 +1594,18 @@ power-domains = <&spm MT8183_POWER_DOMAIN_VENC>; }; + venc_jpg: venc_jpg@17030000 { + compatible = "mediatek,mt8183-jpgenc", "mediatek,mtk-jpgenc"; + reg = <0 0x17030000 0 0x1000>; + interrupts = <GIC_SPI 249 IRQ_TYPE_LEVEL_LOW>; + mediatek,larb = <&larb4>; + iommus = <&iommu M4U_PORT_JPGENC_RDMA>, + <&iommu M4U_PORT_JPGENC_BSDMA>; + power-domains = <&spm MT8183_POWER_DOMAIN_VENC>; + clocks = <&vencsys CLK_VENC_JPGENC>; + clock-names = "jpgenc"; + }; + ipu_conn: syscon@19000000 { compatible = "mediatek,mt8183-ipu_conn", "syscon"; reg = <0 0x19000000 0 0x1000>; diff --git a/arch/arm64/boot/dts/mediatek/mt8192.dtsi b/arch/arm64/boot/dts/mediatek/mt8192.dtsi index 53d790c335f9..411feb294613 100644 --- a/arch/arm64/boot/dts/mediatek/mt8192.dtsi +++ b/arch/arm64/boot/dts/mediatek/mt8192.dtsi @@ -9,6 +9,7 @@ #include <dt-bindings/interrupt-controller/arm-gic.h> #include <dt-bindings/interrupt-controller/irq.h> #include <dt-bindings/pinctrl/mt8192-pinfunc.h> +#include <dt-bindings/power/mt8192-power.h> / { compatible = "mediatek,mt8192"; @@ -301,6 +302,212 @@ #interrupt-cells = <2>; }; + scpsys: syscon@10006000 { + compatible = "syscon", "simple-mfd"; + reg = <0 0x10006000 0 0x1000>; + #power-domain-cells = <1>; + + /* System Power Manager */ + spm: power-controller { + compatible = "mediatek,mt8192-power-controller"; + #address-cells = <1>; + #size-cells = <0>; + #power-domain-cells = <1>; + + /* power domain of the SoC */ + power-domain@MT8192_POWER_DOMAIN_AUDIO { + reg = <MT8192_POWER_DOMAIN_AUDIO>; + clocks = <&topckgen CLK_TOP_AUD_INTBUS_SEL>, + <&infracfg CLK_INFRA_AUDIO_26M_B>, + <&infracfg CLK_INFRA_AUDIO>; + clock-names = "audio", "audio1", "audio2"; + mediatek,infracfg = <&infracfg>; + #power-domain-cells = <0>; + }; + + power-domain@MT8192_POWER_DOMAIN_CONN { + reg = <MT8192_POWER_DOMAIN_CONN>; + clocks = <&infracfg CLK_INFRA_PMIC_CONN>; + clock-names = "conn"; + mediatek,infracfg = <&infracfg>; + #power-domain-cells = <0>; + }; + + power-domain@MT8192_POWER_DOMAIN_MFG0 { + reg = <MT8192_POWER_DOMAIN_MFG0>; + clocks = <&topckgen CLK_TOP_MFG_PLL_SEL>; + clock-names = "mfg"; + #address-cells = <1>; + #size-cells = <0>; + #power-domain-cells = <1>; + + power-domain@MT8192_POWER_DOMAIN_MFG1 { + reg = <MT8192_POWER_DOMAIN_MFG1>; + mediatek,infracfg = <&infracfg>; + #address-cells = <1>; + #size-cells = <0>; + #power-domain-cells = <1>; + + power-domain@MT8192_POWER_DOMAIN_MFG2 { + reg = <MT8192_POWER_DOMAIN_MFG2>; + #power-domain-cells = <0>; + }; + + power-domain@MT8192_POWER_DOMAIN_MFG3 { + reg = <MT8192_POWER_DOMAIN_MFG3>; + #power-domain-cells = <0>; + }; + + power-domain@MT8192_POWER_DOMAIN_MFG4 { + reg = <MT8192_POWER_DOMAIN_MFG4>; + #power-domain-cells = <0>; + }; + + power-domain@MT8192_POWER_DOMAIN_MFG5 { + reg = <MT8192_POWER_DOMAIN_MFG5>; + #power-domain-cells = <0>; + }; + + power-domain@MT8192_POWER_DOMAIN_MFG6 { + reg = <MT8192_POWER_DOMAIN_MFG6>; + #power-domain-cells = <0>; + }; + }; + }; + + power-domain@MT8192_POWER_DOMAIN_DISP { + reg = <MT8192_POWER_DOMAIN_DISP>; + clocks = <&topckgen CLK_TOP_DISP_SEL>, + <&mmsys CLK_MM_SMI_INFRA>, + <&mmsys CLK_MM_SMI_COMMON>, + <&mmsys CLK_MM_SMI_GALS>, + <&mmsys CLK_MM_SMI_IOMMU>; + clock-names = "disp", "disp-0", "disp-1", "disp-2", + "disp-3"; + mediatek,infracfg = <&infracfg>; + #address-cells = <1>; + #size-cells = <0>; + #power-domain-cells = <1>; + + power-domain@MT8192_POWER_DOMAIN_IPE { + reg = <MT8192_POWER_DOMAIN_IPE>; + clocks = <&topckgen CLK_TOP_IPE_SEL>, + <&ipesys CLK_IPE_LARB19>, + <&ipesys CLK_IPE_LARB20>, + <&ipesys CLK_IPE_SMI_SUBCOM>, + <&ipesys CLK_IPE_GALS>; + clock-names = "ipe", "ipe-0", "ipe-1", "ipe-2", + "ipe-3"; + mediatek,infracfg = <&infracfg>; + #power-domain-cells = <0>; + }; + + power-domain@MT8192_POWER_DOMAIN_ISP { + reg = <MT8192_POWER_DOMAIN_ISP>; + clocks = <&topckgen CLK_TOP_IMG1_SEL>, + <&imgsys CLK_IMG_LARB9>, + <&imgsys CLK_IMG_GALS>; + clock-names = "isp", "isp-0", "isp-1"; + mediatek,infracfg = <&infracfg>; + #power-domain-cells = <0>; + }; + + power-domain@MT8192_POWER_DOMAIN_ISP2 { + reg = <MT8192_POWER_DOMAIN_ISP2>; + clocks = <&topckgen CLK_TOP_IMG2_SEL>, + <&imgsys2 CLK_IMG2_LARB11>, + <&imgsys2 CLK_IMG2_GALS>; + clock-names = "isp2", "isp2-0", "isp2-1"; + mediatek,infracfg = <&infracfg>; + #power-domain-cells = <0>; + }; + + power-domain@MT8192_POWER_DOMAIN_MDP { + reg = <MT8192_POWER_DOMAIN_MDP>; + clocks = <&topckgen CLK_TOP_MDP_SEL>, + <&mdpsys CLK_MDP_SMI0>; + clock-names = "mdp", "mdp-0"; + mediatek,infracfg = <&infracfg>; + #power-domain-cells = <0>; + }; + + power-domain@MT8192_POWER_DOMAIN_VENC { + reg = <MT8192_POWER_DOMAIN_VENC>; + clocks = <&topckgen CLK_TOP_VENC_SEL>, + <&vencsys CLK_VENC_SET1_VENC>; + clock-names = "venc", "venc-0"; + mediatek,infracfg = <&infracfg>; + #power-domain-cells = <0>; + }; + + power-domain@MT8192_POWER_DOMAIN_VDEC { + reg = <MT8192_POWER_DOMAIN_VDEC>; + clocks = <&topckgen CLK_TOP_VDEC_SEL>, + <&vdecsys_soc CLK_VDEC_SOC_VDEC>, + <&vdecsys_soc CLK_VDEC_SOC_LAT>, + <&vdecsys_soc CLK_VDEC_SOC_LARB1>; + clock-names = "vdec", "vdec-0", "vdec-1", "vdec-2"; + mediatek,infracfg = <&infracfg>; + #address-cells = <1>; + #size-cells = <0>; + #power-domain-cells = <1>; + + power-domain@MT8192_POWER_DOMAIN_VDEC2 { + reg = <MT8192_POWER_DOMAIN_VDEC2>; + clocks = <&vdecsys CLK_VDEC_VDEC>, + <&vdecsys CLK_VDEC_LAT>, + <&vdecsys CLK_VDEC_LARB1>; + clock-names = "vdec2-0", "vdec2-1", + "vdec2-2"; + #power-domain-cells = <0>; + }; + }; + + power-domain@MT8192_POWER_DOMAIN_CAM { + reg = <MT8192_POWER_DOMAIN_CAM>; + clocks = <&topckgen CLK_TOP_CAM_SEL>, + <&camsys CLK_CAM_LARB13>, + <&camsys CLK_CAM_LARB14>, + <&camsys CLK_CAM_CCU_GALS>, + <&camsys CLK_CAM_CAM2MM_GALS>; + clock-names = "cam", "cam-0", "cam-1", "cam-2", + "cam-3"; + mediatek,infracfg = <&infracfg>; + #address-cells = <1>; + #size-cells = <0>; + #power-domain-cells = <1>; + + power-domain@MT8192_POWER_DOMAIN_CAM_RAWA { + reg = <MT8192_POWER_DOMAIN_CAM_RAWA>; + clocks = <&camsys_rawa CLK_CAM_RAWA_LARBX>; + clock-names = "cam_rawa-0"; + #power-domain-cells = <0>; + }; + + power-domain@MT8192_POWER_DOMAIN_CAM_RAWB { + reg = <MT8192_POWER_DOMAIN_CAM_RAWB>; + clocks = <&camsys_rawb CLK_CAM_RAWB_LARBX>; + clock-names = "cam_rawb-0"; + #power-domain-cells = <0>; + }; + + power-domain@MT8192_POWER_DOMAIN_CAM_RAWC { + reg = <MT8192_POWER_DOMAIN_CAM_RAWC>; + clocks = <&camsys_rawc CLK_CAM_RAWC_LARBX>; + clock-names = "cam_rawc-0"; + #power-domain-cells = <0>; + }; + }; + }; + }; + }; + + watchdog: watchdog@10007000 { + compatible = "mediatek,mt8192-wdt"; + reg = <0 0x10007000 0 0x100>; + #reset-cells = <1>; + }; + apmixedsys: syscon@1000c000 { compatible = "mediatek,mt8192-apmixedsys", "syscon"; reg = <0 0x1000c000 0 0x1000>; @@ -312,7 +519,7 @@ "mediatek,mt6765-timer"; reg = <0 0x10017000 0 0x1000>; interrupts = <GIC_SPI 233 IRQ_TYPE_LEVEL_HIGH 0>; - clocks = <&clk26m>; + clocks = <&topckgen CLK_TOP_CSW_F26M_D2>; clock-names = "clk13m"; }; @@ -327,7 +534,7 @@ "mediatek,mt6577-uart"; reg = <0 0x11002000 0 0x1000>; interrupts = <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH 0>; - clocks = <&clk26m>, <&clk26m>; + clocks = <&clk26m>, <&infracfg CLK_INFRA_UART0>; clock-names = "baud", "bus"; status = "disabled"; }; @@ -337,7 +544,7 @@ "mediatek,mt6577-uart"; reg = <0 0x11003000 0 0x1000>; interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH 0>; - clocks = <&clk26m>, <&clk26m>; + clocks = <&clk26m>, <&infracfg CLK_INFRA_UART1>; clock-names = "baud", "bus"; status = "disabled"; }; @@ -355,9 +562,9 @@ #size-cells = <0>; reg = <0 0x1100a000 0 0x1000>; interrupts = <GIC_SPI 159 IRQ_TYPE_LEVEL_HIGH 0>; - clocks = <&clk26m>, - <&clk26m>, - <&clk26m>; + clocks = <&topckgen CLK_TOP_MAINPLL_D5_D4>, + <&topckgen CLK_TOP_SPI_SEL>, + <&infracfg CLK_INFRA_SPI0>; clock-names = "parent-clk", "sel-clk", "spi-clk"; status = "disabled"; }; @@ -369,9 +576,9 @@ #size-cells = <0>; reg = <0 0x11010000 0 0x1000>; interrupts = <GIC_SPI 160 IRQ_TYPE_LEVEL_HIGH 0>; - clocks = <&clk26m>, - <&clk26m>, - <&clk26m>; + clocks = <&topckgen CLK_TOP_MAINPLL_D5_D4>, + <&topckgen CLK_TOP_SPI_SEL>, + <&infracfg CLK_INFRA_SPI1>; clock-names = "parent-clk", "sel-clk", "spi-clk"; status = "disabled"; }; @@ -383,9 +590,9 @@ #size-cells = <0>; reg = <0 0x11012000 0 0x1000>; interrupts = <GIC_SPI 161 IRQ_TYPE_LEVEL_HIGH 0>; - clocks = <&clk26m>, - <&clk26m>, - <&clk26m>; + clocks = <&topckgen CLK_TOP_MAINPLL_D5_D4>, + <&topckgen CLK_TOP_SPI_SEL>, + <&infracfg CLK_INFRA_SPI2>; clock-names = "parent-clk", "sel-clk", "spi-clk"; status = "disabled"; }; @@ -397,9 +604,9 @@ #size-cells = <0>; reg = <0 0x11013000 0 0x1000>; interrupts = <GIC_SPI 162 IRQ_TYPE_LEVEL_HIGH 0>; - clocks = <&clk26m>, - <&clk26m>, - <&clk26m>; + clocks = <&topckgen CLK_TOP_MAINPLL_D5_D4>, + <&topckgen CLK_TOP_SPI_SEL>, + <&infracfg CLK_INFRA_SPI3>; clock-names = "parent-clk", "sel-clk", "spi-clk"; status = "disabled"; }; @@ -411,9 +618,9 @@ #size-cells = <0>; reg = <0 0x11018000 0 0x1000>; interrupts = <GIC_SPI 163 IRQ_TYPE_LEVEL_HIGH 0>; - clocks = <&clk26m>, - <&clk26m>, - <&clk26m>; + clocks = <&topckgen CLK_TOP_MAINPLL_D5_D4>, + <&topckgen CLK_TOP_SPI_SEL>, + <&infracfg CLK_INFRA_SPI4>; clock-names = "parent-clk", "sel-clk", "spi-clk"; status = "disabled"; }; @@ -425,9 +632,9 @@ #size-cells = <0>; reg = <0 0x11019000 0 0x1000>; interrupts = <GIC_SPI 164 IRQ_TYPE_LEVEL_HIGH 0>; - clocks = <&clk26m>, - <&clk26m>, - <&clk26m>; + clocks = <&topckgen CLK_TOP_MAINPLL_D5_D4>, + <&topckgen CLK_TOP_SPI_SEL>, + <&infracfg CLK_INFRA_SPI5>; clock-names = "parent-clk", "sel-clk", "spi-clk"; status = "disabled"; }; @@ -439,9 +646,9 @@ #size-cells = <0>; reg = <0 0x1101d000 0 0x1000>; interrupts = <GIC_SPI 165 IRQ_TYPE_LEVEL_HIGH 0>; - clocks = <&clk26m>, - <&clk26m>, - <&clk26m>; + clocks = <&topckgen CLK_TOP_MAINPLL_D5_D4>, + <&topckgen CLK_TOP_SPI_SEL>, + <&infracfg CLK_INFRA_SPI6>; clock-names = "parent-clk", "sel-clk", "spi-clk"; status = "disabled"; }; @@ -453,9 +660,9 @@ #size-cells = <0>; reg = <0 0x1101e000 0 0x1000>; interrupts = <GIC_SPI 166 IRQ_TYPE_LEVEL_HIGH 0>; - clocks = <&clk26m>, - <&clk26m>, - <&clk26m>; + clocks = <&topckgen CLK_TOP_MAINPLL_D5_D4>, + <&topckgen CLK_TOP_SPI_SEL>, + <&infracfg CLK_INFRA_SPI7>; clock-names = "parent-clk", "sel-clk", "spi-clk"; status = "disabled"; }; @@ -464,10 +671,12 @@ compatible = "mediatek,mt8192-nor"; reg = <0 0x11234000 0 0xe0>; interrupts = <GIC_SPI 431 IRQ_TYPE_LEVEL_HIGH 0>; - clocks = <&clk26m>, - <&clk26m>, - <&clk26m>; + clocks = <&topckgen CLK_TOP_SFLASH_SEL>, + <&infracfg CLK_INFRA_FLASHIF_SFLASH>, + <&infracfg CLK_INFRA_FLASHIF_TOP_H_133M>; clock-names = "spi", "sf", "axi"; + assigned-clocks = <&topckgen CLK_TOP_SFLASH_SEL>; + assigned-clock-parents = <&clk26m>; #address-cells = <1>; #size-cells = <0>; status = "disable"; @@ -484,7 +693,8 @@ reg = <0 0x11cb0000 0 0x1000>, <0 0x10217300 0 0x80>; interrupts = <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH 0>; - clocks = <&clk26m>, <&clk26m>; + clocks = <&imp_iic_wrap_e CLK_IMP_IIC_WRAP_E_I2C3>, + <&infracfg CLK_INFRA_AP_DMA>; clock-names = "main", "dma"; clock-div = <1>; #address-cells = <1>; @@ -503,7 +713,8 @@ reg = <0 0x11d00000 0 0x1000>, <0 0x10217600 0 0x180>; interrupts = <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH 0>; - clocks = <&clk26m>, <&clk26m>; + clocks = <&imp_iic_wrap_s CLK_IMP_IIC_WRAP_S_I2C7>, + <&infracfg CLK_INFRA_AP_DMA>; clock-names = "main", "dma"; clock-div = <1>; #address-cells = <1>; @@ -516,7 +727,8 @@ reg = <0 0x11d01000 0 0x1000>, <0 0x10217780 0 0x180>; interrupts = <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH 0>; - clocks = <&clk26m>, <&clk26m>; + clocks = <&imp_iic_wrap_s CLK_IMP_IIC_WRAP_S_I2C8>, + <&infracfg CLK_INFRA_AP_DMA>; clock-names = "main", "dma"; clock-div = <1>; #address-cells = <1>; @@ -529,7 +741,8 @@ reg = <0 0x11d02000 0 0x1000>, <0 0x10217900 0 0x180>; interrupts = <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH 0>; - clocks = <&clk26m>, <&clk26m>; + clocks = <&imp_iic_wrap_s CLK_IMP_IIC_WRAP_S_I2C9>, + <&infracfg CLK_INFRA_AP_DMA>; clock-names = "main", "dma"; clock-div = <1>; #address-cells = <1>; @@ -548,7 +761,8 @@ reg = <0 0x11d20000 0 0x1000>, <0 0x10217100 0 0x80>; interrupts = <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH 0>; - clocks = <&clk26m>, <&clk26m>; + clocks = <&imp_iic_wrap_ws CLK_IMP_IIC_WRAP_WS_I2C1>, + <&infracfg CLK_INFRA_AP_DMA>; clock-names = "main", "dma"; clock-div = <1>; #address-cells = <1>; @@ -561,7 +775,8 @@ reg = <0 0x11d21000 0 0x1000>, <0 0x10217180 0 0x180>; interrupts = <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH 0>; - clocks = <&clk26m>, <&clk26m>; + clocks = <&imp_iic_wrap_ws CLK_IMP_IIC_WRAP_WS_I2C2>, + <&infracfg CLK_INFRA_AP_DMA>; clock-names = "main", "dma"; clock-div = <1>; #address-cells = <1>; @@ -574,7 +789,8 @@ reg = <0 0x11d22000 0 0x1000>, <0 0x10217380 0 0x180>; interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH 0>; - clocks = <&clk26m>, <&clk26m>; + clocks = <&imp_iic_wrap_ws CLK_IMP_IIC_WRAP_WS_I2C4>, + <&infracfg CLK_INFRA_AP_DMA>; clock-names = "main", "dma"; clock-div = <1>; #address-cells = <1>; @@ -593,7 +809,8 @@ reg = <0 0x11e00000 0 0x1000>, <0 0x10217500 0 0x80>; interrupts = <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH 0>; - clocks = <&clk26m>, <&clk26m>; + clocks = <&imp_iic_wrap_w CLK_IMP_IIC_WRAP_W_I2C5>, + <&infracfg CLK_INFRA_AP_DMA>; clock-names = "main", "dma"; clock-div = <1>; #address-cells = <1>; @@ -612,7 +829,8 @@ reg = <0 0x11f00000 0 0x1000>, <0 0x10217080 0 0x80>; interrupts = <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH 0>; - clocks = <&clk26m>, <&clk26m>; + clocks = <&imp_iic_wrap_n CLK_IMP_IIC_WRAP_N_I2C0>, + <&infracfg CLK_INFRA_AP_DMA>; clock-names = "main", "dma"; clock-div = <1>; #address-cells = <1>; @@ -625,7 +843,8 @@ reg = <0 0x11f01000 0 0x1000>, <0 0x10217580 0 0x80>; interrupts = <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH 0>; - clocks = <&clk26m>, <&clk26m>; + clocks = <&imp_iic_wrap_n CLK_IMP_IIC_WRAP_N_I2C6>, + <&infracfg CLK_INFRA_AP_DMA>; clock-names = "main", "dma"; clock-div = <1>; #address-cells = <1>; diff --git a/arch/arm64/boot/dts/nvidia/Makefile b/arch/arm64/boot/dts/nvidia/Makefile index ea3f338fd013..bc34c9d8846a 100644 --- a/arch/arm64/boot/dts/nvidia/Makefile +++ b/arch/arm64/boot/dts/nvidia/Makefile @@ -1,4 +1,15 @@ # SPDX-License-Identifier: GPL-2.0 + +# Enables support for device-tree overlays +DTC_FLAGS_tegra210-p2371-2180 := -@ +DTC_FLAGS_tegra210-p3450-0000 := -@ +DTC_FLAGS_tegra186-p2771-0000 := -@ +DTC_FLAGS_tegra186-p3509-0000+p3636-0001 := -@ +DTC_FLAGS_tegra194-p2972-0000 := -@ +DTC_FLAGS_tegra194-p3509-0000+p3668-0000 := -@ +DTC_FLAGS_tegra194-p3509-0000+p3668-0001 := -@ +DTC_FLAGS_tegra234-p3737-0000+p3701-0000 := -@ + dtb-$(CONFIG_ARCH_TEGRA_132_SOC) += tegra132-norrin.dtb dtb-$(CONFIG_ARCH_TEGRA_210_SOC) += tegra210-p2371-0000.dtb dtb-$(CONFIG_ARCH_TEGRA_210_SOC) += tegra210-p2371-2180.dtb diff --git a/arch/arm64/boot/dts/nvidia/tegra186.dtsi b/arch/arm64/boot/dts/nvidia/tegra186.dtsi index c91afff1b757..e9b40f5d79ec 100644 --- a/arch/arm64/boot/dts/nvidia/tegra186.dtsi +++ b/arch/arm64/boot/dts/nvidia/tegra186.dtsi @@ -73,6 +73,48 @@ snps,rxpbl = <8>; }; + gpcdma: dma-controller@2600000 { + compatible = "nvidia,tegra186-gpcdma"; + reg = <0x0 0x2600000 0x0 0x210000>; + resets = <&bpmp TEGRA186_RESET_GPCDMA>; + reset-names = "gpcdma"; + interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>; + #dma-cells = <1>; + iommus = <&smmu TEGRA186_SID_GPCDMA_0>; + dma-coherent; + status = "okay"; + }; + aconnect@2900000 { compatible = "nvidia,tegra186-aconnect", "nvidia,tegra210-aconnect"; @@ -1938,14 +1980,14 @@ }; pmu_denver { - compatible = "nvidia,denver-pmu", "arm,armv8-pmuv3"; + compatible = "nvidia,denver-pmu"; interrupts = <GIC_SPI 320 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 321 IRQ_TYPE_LEVEL_HIGH>; interrupt-affinity = <&denver_0 &denver_1>; }; pmu_a57 { - compatible = "arm,cortex-a57-pmu", "arm,armv8-pmuv3"; + compatible = "arm,cortex-a57-pmu"; interrupts = <GIC_SPI 296 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 297 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 298 IRQ_TYPE_LEVEL_HIGH>, diff --git a/arch/arm64/boot/dts/nvidia/tegra194-p3509-0000.dtsi b/arch/arm64/boot/dts/nvidia/tegra194-p3509-0000.dtsi index 1323fa9b8301..32ce7904f44f 100644 --- a/arch/arm64/boot/dts/nvidia/tegra194-p3509-0000.dtsi +++ b/arch/arm64/boot/dts/nvidia/tegra194-p3509-0000.dtsi @@ -1826,6 +1826,10 @@ pads { usb2 { lanes { + usb2-0 { + status = "okay"; + }; + usb2-1 { status = "okay"; }; @@ -1846,6 +1850,20 @@ }; ports { + usb2-0 { + mode = "otg"; + status = "okay"; + usb-role-switch; + connector { + compatible = "gpio-usb-b-connector", + "usb-b-connector"; + label = "micro-USB"; + type = "micro"; + vbus-gpio = <&gpio TEGRA194_MAIN_GPIO(Z, 1) + GPIO_ACTIVE_LOW>; + }; + }; + usb2-1 { mode = "host"; status = "okay"; @@ -1874,6 +1892,13 @@ phy-names = "usb2-1", "usb2-2", "usb3-2"; }; + usb@3550000 { + status = "okay"; + + phys = <&{/bus@0/padctl@3520000/pads/usb2/lanes/usb2-0}>; + phy-names = "usb2-0"; + }; + spi@3270000 { status = "okay"; diff --git a/arch/arm64/boot/dts/nvidia/tegra194.dtsi b/arch/arm64/boot/dts/nvidia/tegra194.dtsi index aaa00da5351d..751ebe5e9506 100644 --- a/arch/arm64/boot/dts/nvidia/tegra194.dtsi +++ b/arch/arm64/boot/dts/nvidia/tegra194.dtsi @@ -115,6 +115,49 @@ snps,rxpbl = <8>; }; + gpcdma: dma-controller@2600000 { + compatible = "nvidia,tegra194-gpcdma", + "nvidia,tegra186-gpcdma"; + reg = <0x2600000 0x210000>; + resets = <&bpmp TEGRA194_RESET_GPCDMA>; + reset-names = "gpcdma"; + interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>; + #dma-cells = <1>; + iommus = <&smmu TEGRA194_SID_GPCDMA_0>; + dma-coherent; + status = "okay"; + }; + aconnect@2900000 { compatible = "nvidia,tegra194-aconnect", "nvidia,tegra210-aconnect"; @@ -243,6 +286,10 @@ "rx19", "tx19", "rx20", "tx20"; status = "disabled"; + interconnects = <&mc TEGRA194_MEMORY_CLIENT_APEDMAR &emc>, + <&mc TEGRA194_MEMORY_CLIENT_APEDMAW &emc>; + interconnect-names = "dma-mem", "write"; + iommus = <&smmu TEGRA194_SID_APE>; }; tegra_i2s1: i2s@2901000 { @@ -2839,7 +2886,7 @@ }; pmu { - compatible = "arm,armv8-pmuv3"; + compatible = "nvidia,carmel-pmu"; interrupts = <GIC_SPI 384 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 385 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 386 IRQ_TYPE_LEVEL_HIGH>, @@ -2876,11 +2923,6 @@ * for 8x and 11.025x sample rate streams. */ assigned-clock-rates = <258000000>; - - interconnects = <&mc TEGRA194_MEMORY_CLIENT_APEDMAR &emc>, - <&mc TEGRA194_MEMORY_CLIENT_APEDMAW &emc>; - interconnect-names = "dma-mem", "write"; - iommus = <&smmu TEGRA194_SID_APE>; }; tcu: serial { diff --git a/arch/arm64/boot/dts/nvidia/tegra234-p3737-0000+p3701-0000.dts b/arch/arm64/boot/dts/nvidia/tegra234-p3737-0000+p3701-0000.dts index efbbb878ba5a..34d6a01ee1c6 100644 --- a/arch/arm64/boot/dts/nvidia/tegra234-p3737-0000+p3701-0000.dts +++ b/arch/arm64/boot/dts/nvidia/tegra234-p3737-0000+p3701-0000.dts @@ -1,6 +1,9 @@ // SPDX-License-Identifier: GPL-2.0 /dts-v1/; +#include <dt-bindings/input/linux-event-codes.h> +#include <dt-bindings/input/gpio-keys.h> + #include "tegra234-p3701-0000.dtsi" #include "tegra234-p3737-0000.dtsi" @@ -11,6 +14,1744 @@ aliases { mmc3 = "/bus@0/mmc@3460000"; serial0 = &tcu; + serial1 = &uarta; + }; + + bus@0 { + aconnect@2900000 { + status = "okay"; + + ahub@2900800 { + status = "okay"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0x0>; + + xbar_admaif0: endpoint { + remote-endpoint = <&admaif0>; + }; + }; + + port@1 { + reg = <0x1>; + + xbar_admaif1: endpoint { + remote-endpoint = <&admaif1>; + }; + }; + + port@2 { + reg = <0x2>; + + xbar_admaif2: endpoint { + remote-endpoint = <&admaif2>; + }; + }; + + port@3 { + reg = <0x3>; + + xbar_admaif3: endpoint { + remote-endpoint = <&admaif3>; + }; + }; + + port@4 { + reg = <0x4>; + + xbar_admaif4: endpoint { + remote-endpoint = <&admaif4>; + }; + }; + + port@5 { + reg = <0x5>; + + xbar_admaif5: endpoint { + remote-endpoint = <&admaif5>; + }; + }; + + port@6 { + reg = <0x6>; + + xbar_admaif6: endpoint { + remote-endpoint = <&admaif6>; + }; + }; + + port@7 { + reg = <0x7>; + + xbar_admaif7: endpoint { + remote-endpoint = <&admaif7>; + }; + }; + + port@8 { + reg = <0x8>; + + xbar_admaif8: endpoint { + remote-endpoint = <&admaif8>; + }; + }; + + port@9 { + reg = <0x9>; + + xbar_admaif9: endpoint { + remote-endpoint = <&admaif9>; + }; + }; + + port@a { + reg = <0xa>; + + xbar_admaif10: endpoint { + remote-endpoint = <&admaif10>; + }; + }; + + port@b { + reg = <0xb>; + + xbar_admaif11: endpoint { + remote-endpoint = <&admaif11>; + }; + }; + + port@c { + reg = <0xc>; + + xbar_admaif12: endpoint { + remote-endpoint = <&admaif12>; + }; + }; + + port@d { + reg = <0xd>; + + xbar_admaif13: endpoint { + remote-endpoint = <&admaif13>; + }; + }; + + port@e { + reg = <0xe>; + + xbar_admaif14: endpoint { + remote-endpoint = <&admaif14>; + }; + }; + + port@f { + reg = <0xf>; + + xbar_admaif15: endpoint { + remote-endpoint = <&admaif15>; + }; + }; + + port@10 { + reg = <0x10>; + + xbar_admaif16: endpoint { + remote-endpoint = <&admaif16>; + }; + }; + + port@11 { + reg = <0x11>; + + xbar_admaif17: endpoint { + remote-endpoint = <&admaif17>; + }; + }; + + port@12 { + reg = <0x12>; + + xbar_admaif18: endpoint { + remote-endpoint = <&admaif18>; + }; + }; + + port@13 { + reg = <0x13>; + + xbar_admaif19: endpoint { + remote-endpoint = <&admaif19>; + }; + }; + + xbar_i2s1_port: port@14 { + reg = <0x14>; + + xbar_i2s1: endpoint { + remote-endpoint = <&i2s1_cif>; + }; + }; + + xbar_i2s2_port: port@15 { + reg = <0x15>; + + xbar_i2s2: endpoint { + remote-endpoint = <&i2s2_cif>; + }; + }; + + xbar_i2s4_port: port@17 { + reg = <0x17>; + + xbar_i2s4: endpoint { + remote-endpoint = <&i2s4_cif>; + }; + }; + + xbar_i2s6_port: port@19 { + reg = <0x19>; + + xbar_i2s6: endpoint { + remote-endpoint = <&i2s6_cif>; + }; + }; + + xbar_dmic3_port: port@1c { + reg = <0x1c>; + + xbar_dmic3: endpoint { + remote-endpoint = <&dmic3_cif>; + }; + }; + + xbar_sfc1_in_port: port@20 { + reg = <0x20>; + + xbar_sfc1_in: endpoint { + remote-endpoint = <&sfc1_cif_in>; + }; + }; + + port@21 { + reg = <0x21>; + + xbar_sfc1_out: endpoint { + remote-endpoint = <&sfc1_cif_out>; + }; + }; + + xbar_sfc2_in_port: port@22 { + reg = <0x22>; + + xbar_sfc2_in: endpoint { + remote-endpoint = <&sfc2_cif_in>; + }; + }; + + port@23 { + reg = <0x23>; + + xbar_sfc2_out: endpoint { + remote-endpoint = <&sfc2_cif_out>; + }; + }; + + xbar_sfc3_in_port: port@24 { + reg = <0x24>; + + xbar_sfc3_in: endpoint { + remote-endpoint = <&sfc3_cif_in>; + }; + }; + + port@25 { + reg = <0x25>; + + xbar_sfc3_out: endpoint { + remote-endpoint = <&sfc3_cif_out>; + }; + }; + + xbar_sfc4_in_port: port@26 { + reg = <0x26>; + + xbar_sfc4_in: endpoint { + remote-endpoint = <&sfc4_cif_in>; + }; + }; + + port@27 { + reg = <0x27>; + + xbar_sfc4_out: endpoint { + remote-endpoint = <&sfc4_cif_out>; + }; + }; + + xbar_mvc1_in_port: port@28 { + reg = <0x28>; + + xbar_mvc1_in: endpoint { + remote-endpoint = <&mvc1_cif_in>; + }; + }; + + port@29 { + reg = <0x29>; + + xbar_mvc1_out: endpoint { + remote-endpoint = <&mvc1_cif_out>; + }; + }; + + xbar_mvc2_in_port: port@2a { + reg = <0x2a>; + + xbar_mvc2_in: endpoint { + remote-endpoint = <&mvc2_cif_in>; + }; + }; + + port@2b { + reg = <0x2b>; + + xbar_mvc2_out: endpoint { + remote-endpoint = <&mvc2_cif_out>; + }; + }; + + xbar_amx1_in1_port: port@2c { + reg = <0x2c>; + + xbar_amx1_in1: endpoint { + remote-endpoint = <&amx1_in1>; + }; + }; + + xbar_amx1_in2_port: port@2d { + reg = <0x2d>; + + xbar_amx1_in2: endpoint { + remote-endpoint = <&amx1_in2>; + }; + }; + + xbar_amx1_in3_port: port@2e { + reg = <0x2e>; + + xbar_amx1_in3: endpoint { + remote-endpoint = <&amx1_in3>; + }; + }; + + xbar_amx1_in4_port: port@2f { + reg = <0x2f>; + + xbar_amx1_in4: endpoint { + remote-endpoint = <&amx1_in4>; + }; + }; + + port@30 { + reg = <0x30>; + + xbar_amx1_out: endpoint { + remote-endpoint = <&amx1_out>; + }; + }; + + xbar_amx2_in1_port: port@31 { + reg = <0x31>; + + xbar_amx2_in1: endpoint { + remote-endpoint = <&amx2_in1>; + }; + }; + + xbar_amx2_in2_port: port@32 { + reg = <0x32>; + + xbar_amx2_in2: endpoint { + remote-endpoint = <&amx2_in2>; + }; + }; + + xbar_amx2_in3_port: port@33 { + reg = <0x33>; + + xbar_amx2_in3: endpoint { + remote-endpoint = <&amx2_in3>; + }; + }; + + xbar_amx2_in4_port: port@34 { + reg = <0x34>; + + xbar_amx2_in4: endpoint { + remote-endpoint = <&amx2_in4>; + }; + }; + + port@35 { + reg = <0x35>; + + xbar_amx2_out: endpoint { + remote-endpoint = <&amx2_out>; + }; + }; + + xbar_amx3_in1_port: port@36 { + reg = <0x36>; + + xbar_amx3_in1: endpoint { + remote-endpoint = <&amx3_in1>; + }; + }; + + xbar_amx3_in2_port: port@37 { + reg = <0x37>; + + xbar_amx3_in2: endpoint { + remote-endpoint = <&amx3_in2>; + }; + }; + + xbar_amx3_in3_port: port@38 { + reg = <0x38>; + + xbar_amx3_in3: endpoint { + remote-endpoint = <&amx3_in3>; + }; + }; + + xbar_amx3_in4_port: port@39 { + reg = <0x39>; + + xbar_amx3_in4: endpoint { + remote-endpoint = <&amx3_in4>; + }; + }; + + port@3a { + reg = <0x3a>; + + xbar_amx3_out: endpoint { + remote-endpoint = <&amx3_out>; + }; + }; + + xbar_amx4_in1_port: port@3b { + reg = <0x3b>; + + xbar_amx4_in1: endpoint { + remote-endpoint = <&amx4_in1>; + }; + }; + + xbar_amx4_in2_port: port@3c { + reg = <0x3c>; + + xbar_amx4_in2: endpoint { + remote-endpoint = <&amx4_in2>; + }; + }; + + xbar_amx4_in3_port: port@3d { + reg = <0x3d>; + + xbar_amx4_in3: endpoint { + remote-endpoint = <&amx4_in3>; + }; + }; + + xbar_amx4_in4_port: port@3e { + reg = <0x3e>; + + xbar_amx4_in4: endpoint { + remote-endpoint = <&amx4_in4>; + }; + }; + + port@3f { + reg = <0x3f>; + + xbar_amx4_out: endpoint { + remote-endpoint = <&amx4_out>; + }; + }; + + xbar_adx1_in_port: port@40 { + reg = <0x40>; + + xbar_adx1_in: endpoint { + remote-endpoint = <&adx1_in>; + }; + }; + + port@41 { + reg = <0x41>; + + xbar_adx1_out1: endpoint { + remote-endpoint = <&adx1_out1>; + }; + }; + + port@42 { + reg = <0x42>; + + xbar_adx1_out2: endpoint { + remote-endpoint = <&adx1_out2>; + }; + }; + + port@43 { + reg = <0x43>; + + xbar_adx1_out3: endpoint { + remote-endpoint = <&adx1_out3>; + }; + }; + + port@44 { + reg = <0x44>; + + xbar_adx1_out4: endpoint { + remote-endpoint = <&adx1_out4>; + }; + }; + + xbar_adx2_in_port: port@45 { + reg = <0x45>; + + xbar_adx2_in: endpoint { + remote-endpoint = <&adx2_in>; + }; + }; + + port@46 { + reg = <0x46>; + + xbar_adx2_out1: endpoint { + remote-endpoint = <&adx2_out1>; + }; + }; + + port@47 { + reg = <0x47>; + + xbar_adx2_out2: endpoint { + remote-endpoint = <&adx2_out2>; + }; + }; + + port@48 { + reg = <0x48>; + + xbar_adx2_out3: endpoint { + remote-endpoint = <&adx2_out3>; + }; + }; + + port@49 { + reg = <0x49>; + + xbar_adx2_out4: endpoint { + remote-endpoint = <&adx2_out4>; + }; + }; + + xbar_adx3_in_port: port@4a { + reg = <0x4a>; + + xbar_adx3_in: endpoint { + remote-endpoint = <&adx3_in>; + }; + }; + + port@4b { + reg = <0x4b>; + + xbar_adx3_out1: endpoint { + remote-endpoint = <&adx3_out1>; + }; + }; + + port@4c { + reg = <0x4c>; + + xbar_adx3_out2: endpoint { + remote-endpoint = <&adx3_out2>; + }; + }; + + port@4d { + reg = <0x4d>; + + xbar_adx3_out3: endpoint { + remote-endpoint = <&adx3_out3>; + }; + }; + + port@4e { + reg = <0x4e>; + + xbar_adx3_out4: endpoint { + remote-endpoint = <&adx3_out4>; + }; + }; + + xbar_adx4_in_port: port@4f { + reg = <0x4f>; + + xbar_adx4_in: endpoint { + remote-endpoint = <&adx4_in>; + }; + }; + + port@50 { + reg = <0x50>; + + xbar_adx4_out1: endpoint { + remote-endpoint = <&adx4_out1>; + }; + }; + + port@51 { + reg = <0x51>; + + xbar_adx4_out2: endpoint { + remote-endpoint = <&adx4_out2>; + }; + }; + + port@52 { + reg = <0x52>; + + xbar_adx4_out3: endpoint { + remote-endpoint = <&adx4_out3>; + }; + }; + + port@53 { + reg = <0x53>; + + xbar_adx4_out4: endpoint { + remote-endpoint = <&adx4_out4>; + }; + }; + + xbar_mix_in1_port: port@54 { + reg = <0x54>; + + xbar_mix_in1: endpoint { + remote-endpoint = <&mix_in1>; + }; + }; + + xbar_mix_in2_port: port@55 { + reg = <0x55>; + + xbar_mix_in2: endpoint { + remote-endpoint = <&mix_in2>; + }; + }; + + xbar_mix_in3_port: port@56 { + reg = <0x56>; + + xbar_mix_in3: endpoint { + remote-endpoint = <&mix_in3>; + }; + }; + + xbar_mix_in4_port: port@57 { + reg = <0x57>; + + xbar_mix_in4: endpoint { + remote-endpoint = <&mix_in4>; + }; + }; + + xbar_mix_in5_port: port@58 { + reg = <0x58>; + + xbar_mix_in5: endpoint { + remote-endpoint = <&mix_in5>; + }; + }; + + xbar_mix_in6_port: port@59 { + reg = <0x59>; + + xbar_mix_in6: endpoint { + remote-endpoint = <&mix_in6>; + }; + }; + + xbar_mix_in7_port: port@5a { + reg = <0x5a>; + + xbar_mix_in7: endpoint { + remote-endpoint = <&mix_in7>; + }; + }; + + xbar_mix_in8_port: port@5b { + reg = <0x5b>; + + xbar_mix_in8: endpoint { + remote-endpoint = <&mix_in8>; + }; + }; + + xbar_mix_in9_port: port@5c { + reg = <0x5c>; + + xbar_mix_in9: endpoint { + remote-endpoint = <&mix_in9>; + }; + }; + + xbar_mix_in10_port: port@5d { + reg = <0x5d>; + + xbar_mix_in10: endpoint { + remote-endpoint = <&mix_in10>; + }; + }; + + port@5e { + reg = <0x5e>; + + xbar_mix_out1: endpoint { + remote-endpoint = <&mix_out1>; + }; + }; + + port@5f { + reg = <0x5f>; + + xbar_mix_out2: endpoint { + remote-endpoint = <&mix_out2>; + }; + }; + + port@60 { + reg = <0x60>; + + xbar_mix_out3: endpoint { + remote-endpoint = <&mix_out3>; + }; + }; + + port@61 { + reg = <0x61>; + + xbar_mix_out4: endpoint { + remote-endpoint = <&mix_out4>; + }; + }; + + port@62 { + reg = <0x62>; + + xbar_mix_out5: endpoint { + remote-endpoint = <&mix_out5>; + }; + }; + }; + + i2s@2901000 { + status = "okay"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + i2s1_cif: endpoint { + remote-endpoint = <&xbar_i2s1>; + }; + }; + + i2s1_port: port@1 { + reg = <1>; + + i2s1_dap: endpoint { + dai-format = "i2s"; + /* placeholder for external codec */ + }; + }; + }; + }; + + i2s@2901100 { + status = "okay"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + i2s2_cif: endpoint { + remote-endpoint = <&xbar_i2s2>; + }; + }; + + i2s2_port: port@1 { + reg = <1>; + + i2s2_dap: endpoint { + dai-format = "i2s"; + /* placeholder for external codec */ + }; + }; + }; + }; + + i2s@2901300 { + status = "okay"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + i2s4_cif: endpoint { + remote-endpoint = <&xbar_i2s4>; + }; + }; + + i2s4_port: port@1 { + reg = <1>; + + i2s4_dap: endpoint { + dai-format = "i2s"; + /* placeholder for external codec */ + }; + }; + }; + }; + + i2s@2901500 { + status = "okay"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + i2s6_cif: endpoint { + remote-endpoint = <&xbar_i2s6>; + }; + }; + + i2s6_port: port@1 { + reg = <1>; + + i2s6_dap: endpoint { + dai-format = "i2s"; + /* placeholder for external codec */ + }; + }; + }; + }; + + sfc@2902000 { + status = "okay"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + sfc1_cif_in: endpoint { + remote-endpoint = <&xbar_sfc1_in>; + }; + }; + + sfc1_out_port: port@1 { + reg = <1>; + + sfc1_cif_out: endpoint { + remote-endpoint = <&xbar_sfc1_out>; + }; + }; + }; + }; + + sfc@2902200 { + status = "okay"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + sfc2_cif_in: endpoint { + remote-endpoint = <&xbar_sfc2_in>; + }; + }; + + sfc2_out_port: port@1 { + reg = <1>; + + sfc2_cif_out: endpoint { + remote-endpoint = <&xbar_sfc2_out>; + }; + }; + }; + }; + + sfc@2902400 { + status = "okay"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + sfc3_cif_in: endpoint { + remote-endpoint = <&xbar_sfc3_in>; + }; + }; + + sfc3_out_port: port@1 { + reg = <1>; + + sfc3_cif_out: endpoint { + remote-endpoint = <&xbar_sfc3_out>; + }; + }; + }; + }; + + sfc@2902600 { + status = "okay"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + sfc4_cif_in: endpoint { + remote-endpoint = <&xbar_sfc4_in>; + }; + }; + + sfc4_out_port: port@1 { + reg = <1>; + + sfc4_cif_out: endpoint { + remote-endpoint = <&xbar_sfc4_out>; + }; + }; + }; + }; + + amx@2903000 { + status = "okay"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + amx1_in1: endpoint { + remote-endpoint = <&xbar_amx1_in1>; + }; + }; + + port@1 { + reg = <1>; + + amx1_in2: endpoint { + remote-endpoint = <&xbar_amx1_in2>; + }; + }; + + port@2 { + reg = <2>; + + amx1_in3: endpoint { + remote-endpoint = <&xbar_amx1_in3>; + }; + }; + + port@3 { + reg = <3>; + + amx1_in4: endpoint { + remote-endpoint = <&xbar_amx1_in4>; + }; + }; + + amx1_out_port: port@4 { + reg = <4>; + + amx1_out: endpoint { + remote-endpoint = <&xbar_amx1_out>; + }; + }; + }; + }; + + amx@2903100 { + status = "okay"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + amx2_in1: endpoint { + remote-endpoint = <&xbar_amx2_in1>; + }; + }; + + port@1 { + reg = <1>; + + amx2_in2: endpoint { + remote-endpoint = <&xbar_amx2_in2>; + }; + }; + + port@2 { + reg = <2>; + + amx2_in3: endpoint { + remote-endpoint = <&xbar_amx2_in3>; + }; + }; + + port@3 { + reg = <3>; + + amx2_in4: endpoint { + remote-endpoint = <&xbar_amx2_in4>; + }; + }; + + amx2_out_port: port@4 { + reg = <4>; + + amx2_out: endpoint { + remote-endpoint = <&xbar_amx2_out>; + }; + }; + }; + }; + + amx@2903200 { + status = "okay"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + amx3_in1: endpoint { + remote-endpoint = <&xbar_amx3_in1>; + }; + }; + + port@1 { + reg = <1>; + + amx3_in2: endpoint { + remote-endpoint = <&xbar_amx3_in2>; + }; + }; + + port@2 { + reg = <2>; + + amx3_in3: endpoint { + remote-endpoint = <&xbar_amx3_in3>; + }; + }; + + port@3 { + reg = <3>; + + amx3_in4: endpoint { + remote-endpoint = <&xbar_amx3_in4>; + }; + }; + + amx3_out_port: port@4 { + reg = <4>; + + amx3_out: endpoint { + remote-endpoint = <&xbar_amx3_out>; + }; + }; + }; + }; + + amx@2903300 { + status = "okay"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + amx4_in1: endpoint { + remote-endpoint = <&xbar_amx4_in1>; + }; + }; + + port@1 { + reg = <1>; + + amx4_in2: endpoint { + remote-endpoint = <&xbar_amx4_in2>; + }; + }; + + port@2 { + reg = <2>; + + amx4_in3: endpoint { + remote-endpoint = <&xbar_amx4_in3>; + }; + }; + + port@3 { + reg = <3>; + + amx4_in4: endpoint { + remote-endpoint = <&xbar_amx4_in4>; + }; + }; + + amx4_out_port: port@4 { + reg = <4>; + + amx4_out: endpoint { + remote-endpoint = <&xbar_amx4_out>; + }; + }; + }; + }; + + adx@2903800 { + status = "okay"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + adx1_in: endpoint { + remote-endpoint = <&xbar_adx1_in>; + }; + }; + + adx1_out1_port: port@1 { + reg = <1>; + + adx1_out1: endpoint { + remote-endpoint = <&xbar_adx1_out1>; + }; + }; + + adx1_out2_port: port@2 { + reg = <2>; + + adx1_out2: endpoint { + remote-endpoint = <&xbar_adx1_out2>; + }; + }; + + adx1_out3_port: port@3 { + reg = <3>; + + adx1_out3: endpoint { + remote-endpoint = <&xbar_adx1_out3>; + }; + }; + + adx1_out4_port: port@4 { + reg = <4>; + + adx1_out4: endpoint { + remote-endpoint = <&xbar_adx1_out4>; + }; + }; + }; + }; + + adx@2903900 { + status = "okay"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + adx2_in: endpoint { + remote-endpoint = <&xbar_adx2_in>; + }; + }; + + adx2_out1_port: port@1 { + reg = <1>; + + adx2_out1: endpoint { + remote-endpoint = <&xbar_adx2_out1>; + }; + }; + + adx2_out2_port: port@2 { + reg = <2>; + + adx2_out2: endpoint { + remote-endpoint = <&xbar_adx2_out2>; + }; + }; + + adx2_out3_port: port@3 { + reg = <3>; + + adx2_out3: endpoint { + remote-endpoint = <&xbar_adx2_out3>; + }; + }; + + adx2_out4_port: port@4 { + reg = <4>; + + adx2_out4: endpoint { + remote-endpoint = <&xbar_adx2_out4>; + }; + }; + }; + }; + + adx@2903a00 { + status = "okay"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + adx3_in: endpoint { + remote-endpoint = <&xbar_adx3_in>; + }; + }; + + adx3_out1_port: port@1 { + reg = <1>; + + adx3_out1: endpoint { + remote-endpoint = <&xbar_adx3_out1>; + }; + }; + + adx3_out2_port: port@2 { + reg = <2>; + + adx3_out2: endpoint { + remote-endpoint = <&xbar_adx3_out2>; + }; + }; + + adx3_out3_port: port@3 { + reg = <3>; + + adx3_out3: endpoint { + remote-endpoint = <&xbar_adx3_out3>; + }; + }; + + adx3_out4_port: port@4 { + reg = <4>; + + adx3_out4: endpoint { + remote-endpoint = <&xbar_adx3_out4>; + }; + }; + }; + }; + + adx@2903b00 { + status = "okay"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + adx4_in: endpoint { + remote-endpoint = <&xbar_adx4_in>; + }; + }; + + adx4_out1_port: port@1 { + reg = <1>; + + adx4_out1: endpoint { + remote-endpoint = <&xbar_adx4_out1>; + }; + }; + + adx4_out2_port: port@2 { + reg = <2>; + + adx4_out2: endpoint { + remote-endpoint = <&xbar_adx4_out2>; + }; + }; + + adx4_out3_port: port@3 { + reg = <3>; + + adx4_out3: endpoint { + remote-endpoint = <&xbar_adx4_out3>; + }; + }; + + adx4_out4_port: port@4 { + reg = <4>; + + adx4_out4: endpoint { + remote-endpoint = <&xbar_adx4_out4>; + }; + }; + }; + }; + + dmic@2904200 { + status = "okay"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + dmic3_cif: endpoint { + remote-endpoint = <&xbar_dmic3>; + }; + }; + + dmic3_port: port@1 { + reg = <1>; + + dmic3_dap: endpoint { + /* placeholder for external codec */ + }; + }; + }; + }; + + mvc@290a000 { + status = "okay"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + mvc1_cif_in: endpoint { + remote-endpoint = <&xbar_mvc1_in>; + }; + }; + + mvc1_out_port: port@1 { + reg = <1>; + + mvc1_cif_out: endpoint { + remote-endpoint = <&xbar_mvc1_out>; + }; + }; + }; + }; + + mvc@290a200 { + status = "okay"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + mvc2_cif_in: endpoint { + remote-endpoint = <&xbar_mvc2_in>; + }; + }; + + mvc2_out_port: port@1 { + reg = <1>; + + mvc2_cif_out: endpoint { + remote-endpoint = <&xbar_mvc2_out>; + }; + }; + }; + }; + + amixer@290bb00 { + status = "okay"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0x0>; + + mix_in1: endpoint { + remote-endpoint = <&xbar_mix_in1>; + }; + }; + + port@1 { + reg = <0x1>; + + mix_in2: endpoint { + remote-endpoint = <&xbar_mix_in2>; + }; + }; + + port@2 { + reg = <0x2>; + + mix_in3: endpoint { + remote-endpoint = <&xbar_mix_in3>; + }; + }; + + port@3 { + reg = <0x3>; + + mix_in4: endpoint { + remote-endpoint = <&xbar_mix_in4>; + }; + }; + + port@4 { + reg = <0x4>; + + mix_in5: endpoint { + remote-endpoint = <&xbar_mix_in5>; + }; + }; + + port@5 { + reg = <0x5>; + + mix_in6: endpoint { + remote-endpoint = <&xbar_mix_in6>; + }; + }; + + port@6 { + reg = <0x6>; + + mix_in7: endpoint { + remote-endpoint = <&xbar_mix_in7>; + }; + }; + + port@7 { + reg = <0x7>; + + mix_in8: endpoint { + remote-endpoint = <&xbar_mix_in8>; + }; + }; + + port@8 { + reg = <0x8>; + + mix_in9: endpoint { + remote-endpoint = <&xbar_mix_in9>; + }; + }; + + port@9 { + reg = <0x9>; + + mix_in10: endpoint { + remote-endpoint = <&xbar_mix_in10>; + }; + }; + + mix_out1_port: port@a { + reg = <0xa>; + + mix_out1: endpoint { + remote-endpoint = <&xbar_mix_out1>; + }; + }; + + mix_out2_port: port@b { + reg = <0xb>; + + mix_out2: endpoint { + remote-endpoint = <&xbar_mix_out2>; + }; + }; + + mix_out3_port: port@c { + reg = <0xc>; + + mix_out3: endpoint { + remote-endpoint = <&xbar_mix_out3>; + }; + }; + + mix_out4_port: port@d { + reg = <0xd>; + + mix_out4: endpoint { + remote-endpoint = <&xbar_mix_out4>; + }; + }; + + mix_out5_port: port@e { + reg = <0xe>; + + mix_out5: endpoint { + remote-endpoint = <&xbar_mix_out5>; + }; + }; + }; + }; + + admaif@290f000 { + status = "okay"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + admaif0_port: port@0 { + reg = <0x0>; + + admaif0: endpoint { + remote-endpoint = <&xbar_admaif0>; + }; + }; + + admaif1_port: port@1 { + reg = <0x1>; + + admaif1: endpoint { + remote-endpoint = <&xbar_admaif1>; + }; + }; + + admaif2_port: port@2 { + reg = <0x2>; + + admaif2: endpoint { + remote-endpoint = <&xbar_admaif2>; + }; + }; + + admaif3_port: port@3 { + reg = <0x3>; + + admaif3: endpoint { + remote-endpoint = <&xbar_admaif3>; + }; + }; + + admaif4_port: port@4 { + reg = <0x4>; + + admaif4: endpoint { + remote-endpoint = <&xbar_admaif4>; + }; + }; + + admaif5_port: port@5 { + reg = <0x5>; + + admaif5: endpoint { + remote-endpoint = <&xbar_admaif5>; + }; + }; + + admaif6_port: port@6 { + reg = <0x6>; + + admaif6: endpoint { + remote-endpoint = <&xbar_admaif6>; + }; + }; + + admaif7_port: port@7 { + reg = <0x7>; + + admaif7: endpoint { + remote-endpoint = <&xbar_admaif7>; + }; + }; + + admaif8_port: port@8 { + reg = <0x8>; + + admaif8: endpoint { + remote-endpoint = <&xbar_admaif8>; + }; + }; + + admaif9_port: port@9 { + reg = <0x9>; + + admaif9: endpoint { + remote-endpoint = <&xbar_admaif9>; + }; + }; + + admaif10_port: port@a { + reg = <0xa>; + + admaif10: endpoint { + remote-endpoint = <&xbar_admaif10>; + }; + }; + + admaif11_port: port@b { + reg = <0xb>; + + admaif11: endpoint { + remote-endpoint = <&xbar_admaif11>; + }; + }; + + admaif12_port: port@c { + reg = <0xc>; + + admaif12: endpoint { + remote-endpoint = <&xbar_admaif12>; + }; + }; + + admaif13_port: port@d { + reg = <0xd>; + + admaif13: endpoint { + remote-endpoint = <&xbar_admaif13>; + }; + }; + + admaif14_port: port@e { + reg = <0xe>; + + admaif14: endpoint { + remote-endpoint = <&xbar_admaif14>; + }; + }; + + admaif15_port: port@f { + reg = <0xf>; + + admaif15: endpoint { + remote-endpoint = <&xbar_admaif15>; + }; + }; + + admaif16_port: port@10 { + reg = <0x10>; + + admaif16: endpoint { + remote-endpoint = <&xbar_admaif16>; + }; + }; + + admaif17_port: port@11 { + reg = <0x11>; + + admaif17: endpoint { + remote-endpoint = <&xbar_admaif17>; + }; + }; + + admaif18_port: port@12 { + reg = <0x12>; + + admaif18: endpoint { + remote-endpoint = <&xbar_admaif18>; + }; + }; + + admaif19_port: port@13 { + reg = <0x13>; + + admaif19: endpoint { + remote-endpoint = <&xbar_admaif19>; + }; + }; + }; + }; + }; + + dma-controller@2930000 { + status = "okay"; + }; + + interrupt-controller@2a40000 { + status = "okay"; + }; + }; + + serial@3100000 { + compatible = "nvidia,tegra194-hsuart"; + status = "okay"; + }; + + hda@3510000 { + nvidia,model = "NVIDIA Jetson AGX Orin HDA"; + }; }; chosen { @@ -18,7 +1759,90 @@ stdout-path = "serial0:115200n8"; }; + gpio-keys { + compatible = "gpio-keys"; + status = "okay"; + + force-recovery { + label = "Force Recovery"; + gpios = <&gpio TEGRA234_MAIN_GPIO(G, 0) GPIO_ACTIVE_LOW>; + linux,input-type = <EV_KEY>; + linux,code = <BTN_1>; + }; + + power-key { + label = "Power"; + gpios = <&gpio_aon TEGRA234_AON_GPIO(EE, 4) GPIO_ACTIVE_LOW>; + linux,input-type = <EV_KEY>; + linux,code = <KEY_POWER>; + wakeup-event-action = <EV_ACT_ASSERTED>; + wakeup-source; + }; + + suspend { + label = "Suspend"; + gpios = <&gpio TEGRA234_MAIN_GPIO(G, 2) GPIO_ACTIVE_LOW>; + linux,input-type = <EV_KEY>; + linux,code = <KEY_SLEEP>; + }; + }; + serial { status = "okay"; }; + + sound { + status = "okay"; + + compatible = "nvidia,tegra186-audio-graph-card"; + + dais = /* ADMAIF (FE) Ports */ + <&admaif0_port>, <&admaif1_port>, <&admaif2_port>, <&admaif3_port>, + <&admaif4_port>, <&admaif5_port>, <&admaif6_port>, <&admaif7_port>, + <&admaif8_port>, <&admaif9_port>, <&admaif10_port>, <&admaif11_port>, + <&admaif12_port>, <&admaif13_port>, <&admaif14_port>, <&admaif15_port>, + <&admaif16_port>, <&admaif17_port>, <&admaif18_port>, <&admaif19_port>, + /* XBAR Ports */ + <&xbar_i2s1_port>, <&xbar_i2s2_port>, <&xbar_i2s4_port>, + <&xbar_i2s6_port>, <&xbar_dmic3_port>, + <&xbar_sfc1_in_port>, <&xbar_sfc2_in_port>, + <&xbar_sfc3_in_port>, <&xbar_sfc4_in_port>, + <&xbar_mvc1_in_port>, <&xbar_mvc2_in_port>, + <&xbar_amx1_in1_port>, <&xbar_amx1_in2_port>, + <&xbar_amx1_in3_port>, <&xbar_amx1_in4_port>, + <&xbar_amx2_in1_port>, <&xbar_amx2_in2_port>, + <&xbar_amx2_in3_port>, <&xbar_amx2_in4_port>, + <&xbar_amx3_in1_port>, <&xbar_amx3_in2_port>, + <&xbar_amx3_in3_port>, <&xbar_amx3_in4_port>, + <&xbar_amx4_in1_port>, <&xbar_amx4_in2_port>, + <&xbar_amx4_in3_port>, <&xbar_amx4_in4_port>, + <&xbar_adx1_in_port>, <&xbar_adx2_in_port>, + <&xbar_adx3_in_port>, <&xbar_adx4_in_port>, + <&xbar_mix_in1_port>, <&xbar_mix_in2_port>, + <&xbar_mix_in3_port>, <&xbar_mix_in4_port>, + <&xbar_mix_in5_port>, <&xbar_mix_in6_port>, + <&xbar_mix_in7_port>, <&xbar_mix_in8_port>, + <&xbar_mix_in9_port>, <&xbar_mix_in10_port>, + /* HW accelerators */ + <&sfc1_out_port>, <&sfc2_out_port>, + <&sfc3_out_port>, <&sfc4_out_port>, + <&mvc1_out_port>, <&mvc2_out_port>, + <&amx1_out_port>, <&amx2_out_port>, + <&amx3_out_port>, <&amx4_out_port>, + <&adx1_out1_port>, <&adx1_out2_port>, + <&adx1_out3_port>, <&adx1_out4_port>, + <&adx2_out1_port>, <&adx2_out2_port>, + <&adx2_out3_port>, <&adx2_out4_port>, + <&adx3_out1_port>, <&adx3_out2_port>, + <&adx3_out3_port>, <&adx3_out4_port>, + <&adx4_out1_port>, <&adx4_out2_port>, + <&adx4_out3_port>, <&adx4_out4_port>, + <&mix_out1_port>, <&mix_out2_port>, <&mix_out3_port>, + <&mix_out4_port>, <&mix_out5_port>, + /* BE I/O Ports */ + <&i2s1_port>, <&i2s2_port>, <&i2s4_port>, <&i2s6_port>, + <&dmic3_port>; + + label = "NVIDIA Jetson AGX Orin APE"; + }; }; diff --git a/arch/arm64/boot/dts/nvidia/tegra234.dtsi b/arch/arm64/boot/dts/nvidia/tegra234.dtsi index 6b6f15804a1a..aaace605bdaa 100644 --- a/arch/arm64/boot/dts/nvidia/tegra234.dtsi +++ b/arch/arm64/boot/dts/nvidia/tegra234.dtsi @@ -1,9 +1,11 @@ // SPDX-License-Identifier: GPL-2.0 #include <dt-bindings/clock/tegra234-clock.h> +#include <dt-bindings/gpio/tegra234-gpio.h> #include <dt-bindings/interrupt-controller/arm-gic.h> #include <dt-bindings/mailbox/tegra186-hsp.h> #include <dt-bindings/memory/tegra234-mc.h> +#include <dt-bindings/power/tegra234-powergate.h> #include <dt-bindings/reset/tegra234-reset.h> / { @@ -19,6 +21,424 @@ ranges = <0x0 0x0 0x0 0x40000000>; + aconnect@2900000 { + compatible = "nvidia,tegra234-aconnect", + "nvidia,tegra210-aconnect"; + clocks = <&bpmp TEGRA234_CLK_APE>, + <&bpmp TEGRA234_CLK_APB2APE>; + clock-names = "ape", "apb2ape"; + power-domains = <&bpmp TEGRA234_POWER_DOMAIN_AUD>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x02900000 0x02900000 0x200000>; + status = "disabled"; + + tegra_ahub: ahub@2900800 { + compatible = "nvidia,tegra234-ahub"; + reg = <0x02900800 0x800>; + clocks = <&bpmp TEGRA234_CLK_AHUB>; + clock-names = "ahub"; + assigned-clocks = <&bpmp TEGRA234_CLK_AHUB>; + assigned-clock-parents = <&bpmp TEGRA234_CLK_PLLA_OUT0>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x02900800 0x02900800 0x11800>; + status = "disabled"; + + tegra_i2s1: i2s@2901000 { + compatible = "nvidia,tegra234-i2s", + "nvidia,tegra210-i2s"; + reg = <0x2901000 0x100>; + clocks = <&bpmp TEGRA234_CLK_I2S1>, + <&bpmp TEGRA234_CLK_I2S1_SYNC_INPUT>; + clock-names = "i2s", "sync_input"; + assigned-clocks = <&bpmp TEGRA234_CLK_I2S1>; + assigned-clock-parents = <&bpmp TEGRA234_CLK_PLLA_OUT0>; + assigned-clock-rates = <1536000>; + sound-name-prefix = "I2S1"; + status = "disabled"; + }; + + tegra_i2s2: i2s@2901100 { + compatible = "nvidia,tegra234-i2s", + "nvidia,tegra210-i2s"; + reg = <0x2901100 0x100>; + clocks = <&bpmp TEGRA234_CLK_I2S2>, + <&bpmp TEGRA234_CLK_I2S2_SYNC_INPUT>; + clock-names = "i2s", "sync_input"; + assigned-clocks = <&bpmp TEGRA234_CLK_I2S2>; + assigned-clock-parents = <&bpmp TEGRA234_CLK_PLLA_OUT0>; + assigned-clock-rates = <1536000>; + sound-name-prefix = "I2S2"; + status = "disabled"; + }; + + tegra_i2s3: i2s@2901200 { + compatible = "nvidia,tegra234-i2s", + "nvidia,tegra210-i2s"; + reg = <0x2901200 0x100>; + clocks = <&bpmp TEGRA234_CLK_I2S3>, + <&bpmp TEGRA234_CLK_I2S3_SYNC_INPUT>; + clock-names = "i2s", "sync_input"; + assigned-clocks = <&bpmp TEGRA234_CLK_I2S3>; + assigned-clock-parents = <&bpmp TEGRA234_CLK_PLLA_OUT0>; + assigned-clock-rates = <1536000>; + sound-name-prefix = "I2S3"; + status = "disabled"; + }; + + tegra_i2s4: i2s@2901300 { + compatible = "nvidia,tegra234-i2s", + "nvidia,tegra210-i2s"; + reg = <0x2901300 0x100>; + clocks = <&bpmp TEGRA234_CLK_I2S4>, + <&bpmp TEGRA234_CLK_I2S4_SYNC_INPUT>; + clock-names = "i2s", "sync_input"; + assigned-clocks = <&bpmp TEGRA234_CLK_I2S4>; + assigned-clock-parents = <&bpmp TEGRA234_CLK_PLLA_OUT0>; + assigned-clock-rates = <1536000>; + sound-name-prefix = "I2S4"; + status = "disabled"; + }; + + tegra_i2s5: i2s@2901400 { + compatible = "nvidia,tegra234-i2s", + "nvidia,tegra210-i2s"; + reg = <0x2901400 0x100>; + clocks = <&bpmp TEGRA234_CLK_I2S5>, + <&bpmp TEGRA234_CLK_I2S5_SYNC_INPUT>; + clock-names = "i2s", "sync_input"; + assigned-clocks = <&bpmp TEGRA234_CLK_I2S5>; + assigned-clock-parents = <&bpmp TEGRA234_CLK_PLLA_OUT0>; + assigned-clock-rates = <1536000>; + sound-name-prefix = "I2S5"; + status = "disabled"; + }; + + tegra_i2s6: i2s@2901500 { + compatible = "nvidia,tegra234-i2s", + "nvidia,tegra210-i2s"; + reg = <0x2901500 0x100>; + clocks = <&bpmp TEGRA234_CLK_I2S6>, + <&bpmp TEGRA234_CLK_I2S6_SYNC_INPUT>; + clock-names = "i2s", "sync_input"; + assigned-clocks = <&bpmp TEGRA234_CLK_I2S6>; + assigned-clock-parents = <&bpmp TEGRA234_CLK_PLLA_OUT0>; + assigned-clock-rates = <1536000>; + sound-name-prefix = "I2S6"; + status = "disabled"; + }; + + tegra_sfc1: sfc@2902000 { + compatible = "nvidia,tegra234-sfc", + "nvidia,tegra210-sfc"; + reg = <0x2902000 0x200>; + sound-name-prefix = "SFC1"; + status = "disabled"; + }; + + tegra_sfc2: sfc@2902200 { + compatible = "nvidia,tegra234-sfc", + "nvidia,tegra210-sfc"; + reg = <0x2902200 0x200>; + sound-name-prefix = "SFC2"; + status = "disabled"; + }; + + tegra_sfc3: sfc@2902400 { + compatible = "nvidia,tegra234-sfc", + "nvidia,tegra210-sfc"; + reg = <0x2902400 0x200>; + sound-name-prefix = "SFC3"; + status = "disabled"; + }; + + tegra_sfc4: sfc@2902600 { + compatible = "nvidia,tegra234-sfc", + "nvidia,tegra210-sfc"; + reg = <0x2902600 0x200>; + sound-name-prefix = "SFC4"; + status = "disabled"; + }; + + tegra_amx1: amx@2903000 { + compatible = "nvidia,tegra234-amx", + "nvidia,tegra194-amx"; + reg = <0x2903000 0x100>; + sound-name-prefix = "AMX1"; + status = "disabled"; + }; + + tegra_amx2: amx@2903100 { + compatible = "nvidia,tegra234-amx", + "nvidia,tegra194-amx"; + reg = <0x2903100 0x100>; + sound-name-prefix = "AMX2"; + status = "disabled"; + }; + + tegra_amx3: amx@2903200 { + compatible = "nvidia,tegra234-amx", + "nvidia,tegra194-amx"; + reg = <0x2903200 0x100>; + sound-name-prefix = "AMX3"; + status = "disabled"; + }; + + tegra_amx4: amx@2903300 { + compatible = "nvidia,tegra234-amx", + "nvidia,tegra194-amx"; + reg = <0x2903300 0x100>; + sound-name-prefix = "AMX4"; + status = "disabled"; + }; + + tegra_adx1: adx@2903800 { + compatible = "nvidia,tegra234-adx", + "nvidia,tegra210-adx"; + reg = <0x2903800 0x100>; + sound-name-prefix = "ADX1"; + status = "disabled"; + }; + + tegra_adx2: adx@2903900 { + compatible = "nvidia,tegra234-adx", + "nvidia,tegra210-adx"; + reg = <0x2903900 0x100>; + sound-name-prefix = "ADX2"; + status = "disabled"; + }; + + tegra_adx3: adx@2903a00 { + compatible = "nvidia,tegra234-adx", + "nvidia,tegra210-adx"; + reg = <0x2903a00 0x100>; + sound-name-prefix = "ADX3"; + status = "disabled"; + }; + + tegra_adx4: adx@2903b00 { + compatible = "nvidia,tegra234-adx", + "nvidia,tegra210-adx"; + reg = <0x2903b00 0x100>; + sound-name-prefix = "ADX4"; + status = "disabled"; + }; + + + tegra_dmic1: dmic@2904000 { + compatible = "nvidia,tegra234-dmic", + "nvidia,tegra210-dmic"; + reg = <0x2904000 0x100>; + clocks = <&bpmp TEGRA234_CLK_DMIC1>; + clock-names = "dmic"; + assigned-clocks = <&bpmp TEGRA234_CLK_DMIC1>; + assigned-clock-parents = <&bpmp TEGRA234_CLK_PLLA_OUT0>; + assigned-clock-rates = <3072000>; + sound-name-prefix = "DMIC1"; + status = "disabled"; + }; + + tegra_dmic2: dmic@2904100 { + compatible = "nvidia,tegra234-dmic", + "nvidia,tegra210-dmic"; + reg = <0x2904100 0x100>; + clocks = <&bpmp TEGRA234_CLK_DMIC2>; + clock-names = "dmic"; + assigned-clocks = <&bpmp TEGRA234_CLK_DMIC2>; + assigned-clock-parents = <&bpmp TEGRA234_CLK_PLLA_OUT0>; + assigned-clock-rates = <3072000>; + sound-name-prefix = "DMIC2"; + status = "disabled"; + }; + + tegra_dmic3: dmic@2904200 { + compatible = "nvidia,tegra234-dmic", + "nvidia,tegra210-dmic"; + reg = <0x2904200 0x100>; + clocks = <&bpmp TEGRA234_CLK_DMIC3>; + clock-names = "dmic"; + assigned-clocks = <&bpmp TEGRA234_CLK_DMIC3>; + assigned-clock-parents = <&bpmp TEGRA234_CLK_PLLA_OUT0>; + assigned-clock-rates = <3072000>; + sound-name-prefix = "DMIC3"; + status = "disabled"; + }; + + tegra_dmic4: dmic@2904300 { + compatible = "nvidia,tegra234-dmic", + "nvidia,tegra210-dmic"; + reg = <0x2904300 0x100>; + clocks = <&bpmp TEGRA234_CLK_DMIC4>; + clock-names = "dmic"; + assigned-clocks = <&bpmp TEGRA234_CLK_DMIC4>; + assigned-clock-parents = <&bpmp TEGRA234_CLK_PLLA_OUT0>; + assigned-clock-rates = <3072000>; + sound-name-prefix = "DMIC4"; + status = "disabled"; + }; + + tegra_dspk1: dspk@2905000 { + compatible = "nvidia,tegra234-dspk", + "nvidia,tegra186-dspk"; + reg = <0x2905000 0x100>; + clocks = <&bpmp TEGRA234_CLK_DSPK1>; + clock-names = "dspk"; + assigned-clocks = <&bpmp TEGRA234_CLK_DSPK1>; + assigned-clock-parents = <&bpmp TEGRA234_CLK_PLLA_OUT0>; + assigned-clock-rates = <12288000>; + sound-name-prefix = "DSPK1"; + status = "disabled"; + }; + + tegra_dspk2: dspk@2905100 { + compatible = "nvidia,tegra234-dspk", + "nvidia,tegra186-dspk"; + reg = <0x2905100 0x100>; + clocks = <&bpmp TEGRA234_CLK_DSPK2>; + clock-names = "dspk"; + assigned-clocks = <&bpmp TEGRA234_CLK_DSPK2>; + assigned-clock-parents = <&bpmp TEGRA234_CLK_PLLA_OUT0>; + assigned-clock-rates = <12288000>; + sound-name-prefix = "DSPK2"; + status = "disabled"; + }; + + tegra_mvc1: mvc@290a000 { + compatible = "nvidia,tegra234-mvc", + "nvidia,tegra210-mvc"; + reg = <0x290a000 0x200>; + sound-name-prefix = "MVC1"; + status = "disabled"; + }; + + tegra_mvc2: mvc@290a200 { + compatible = "nvidia,tegra234-mvc", + "nvidia,tegra210-mvc"; + reg = <0x290a200 0x200>; + sound-name-prefix = "MVC2"; + status = "disabled"; + }; + + tegra_amixer: amixer@290bb00 { + compatible = "nvidia,tegra234-amixer", + "nvidia,tegra210-amixer"; + reg = <0x290bb00 0x800>; + sound-name-prefix = "MIXER1"; + status = "disabled"; + }; + + tegra_admaif: admaif@290f000 { + compatible = "nvidia,tegra234-admaif", + "nvidia,tegra186-admaif"; + reg = <0x0290f000 0x1000>; + dmas = <&adma 1>, <&adma 1>, + <&adma 2>, <&adma 2>, + <&adma 3>, <&adma 3>, + <&adma 4>, <&adma 4>, + <&adma 5>, <&adma 5>, + <&adma 6>, <&adma 6>, + <&adma 7>, <&adma 7>, + <&adma 8>, <&adma 8>, + <&adma 9>, <&adma 9>, + <&adma 10>, <&adma 10>, + <&adma 11>, <&adma 11>, + <&adma 12>, <&adma 12>, + <&adma 13>, <&adma 13>, + <&adma 14>, <&adma 14>, + <&adma 15>, <&adma 15>, + <&adma 16>, <&adma 16>, + <&adma 17>, <&adma 17>, + <&adma 18>, <&adma 18>, + <&adma 19>, <&adma 19>, + <&adma 20>, <&adma 20>; + dma-names = "rx1", "tx1", + "rx2", "tx2", + "rx3", "tx3", + "rx4", "tx4", + "rx5", "tx5", + "rx6", "tx6", + "rx7", "tx7", + "rx8", "tx8", + "rx9", "tx9", + "rx10", "tx10", + "rx11", "tx11", + "rx12", "tx12", + "rx13", "tx13", + "rx14", "tx14", + "rx15", "tx15", + "rx16", "tx16", + "rx17", "tx17", + "rx18", "tx18", + "rx19", "tx19", + "rx20", "tx20"; + interconnects = <&mc TEGRA234_MEMORY_CLIENT_APEDMAR &emc>, + <&mc TEGRA234_MEMORY_CLIENT_APEDMAW &emc>; + interconnect-names = "dma-mem", "write"; + iommus = <&smmu_niso0 TEGRA234_SID_APE>; + status = "disabled"; + }; + }; + + adma: dma-controller@2930000 { + compatible = "nvidia,tegra234-adma", + "nvidia,tegra186-adma"; + reg = <0x02930000 0x20000>; + interrupt-parent = <&agic>; + interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>; + #dma-cells = <1>; + clocks = <&bpmp TEGRA234_CLK_AHUB>; + clock-names = "d_audio"; + status = "disabled"; + }; + + agic: interrupt-controller@2a40000 { + compatible = "nvidia,tegra234-agic", + "nvidia,tegra210-agic"; + #interrupt-cells = <3>; + interrupt-controller; + reg = <0x02a41000 0x1000>, + <0x02a42000 0x2000>; + interrupts = <GIC_SPI 145 + (GIC_CPU_MASK_SIMPLE(4) | + IRQ_TYPE_LEVEL_HIGH)>; + clocks = <&bpmp TEGRA234_CLK_APE>; + clock-names = "clk"; + status = "disabled"; + }; + }; + misc@100000 { compatible = "nvidia,tegra234-misc"; reg = <0x00100000 0xf000>, @@ -144,6 +564,108 @@ status = "disabled"; }; + gen1_i2c: i2c@3160000 { + compatible = "nvidia,tegra194-i2c"; + reg = <0x3160000 0x100>; + status = "disabled"; + interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>; + clock-frequency = <400000>; + clocks = <&bpmp TEGRA234_CLK_I2C1 + &bpmp TEGRA234_CLK_PLLP_OUT0>; + assigned-clocks = <&bpmp TEGRA234_CLK_I2C1>; + assigned-clock-parents = <&bpmp TEGRA234_CLK_PLLP_OUT0>; + clock-names = "div-clk", "parent"; + resets = <&bpmp TEGRA234_RESET_I2C1>; + reset-names = "i2c"; + }; + + cam_i2c: i2c@3180000 { + compatible = "nvidia,tegra194-i2c"; + reg = <0x3180000 0x100>; + interrupts = <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + clock-frequency = <400000>; + clocks = <&bpmp TEGRA234_CLK_I2C3 + &bpmp TEGRA234_CLK_PLLP_OUT0>; + assigned-clocks = <&bpmp TEGRA234_CLK_I2C3>; + assigned-clock-parents = <&bpmp TEGRA234_CLK_PLLP_OUT0>; + clock-names = "div-clk", "parent"; + resets = <&bpmp TEGRA234_RESET_I2C3>; + reset-names = "i2c"; + }; + + dp_aux_ch1_i2c: i2c@3190000 { + compatible = "nvidia,tegra194-i2c"; + reg = <0x3190000 0x100>; + interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + clock-frequency = <100000>; + clocks = <&bpmp TEGRA234_CLK_I2C4 + &bpmp TEGRA234_CLK_PLLP_OUT0>; + assigned-clocks = <&bpmp TEGRA234_CLK_I2C4>; + assigned-clock-parents = <&bpmp TEGRA234_CLK_PLLP_OUT0>; + clock-names = "div-clk", "parent"; + resets = <&bpmp TEGRA234_RESET_I2C4>; + reset-names = "i2c"; + }; + + dp_aux_ch0_i2c: i2c@31b0000 { + compatible = "nvidia,tegra194-i2c"; + reg = <0x31b0000 0x100>; + interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + clock-frequency = <100000>; + clocks = <&bpmp TEGRA234_CLK_I2C6 + &bpmp TEGRA234_CLK_PLLP_OUT0>; + assigned-clocks = <&bpmp TEGRA234_CLK_I2C6>; + assigned-clock-parents = <&bpmp TEGRA234_CLK_PLLP_OUT0>; + clock-names = "div-clk", "parent"; + resets = <&bpmp TEGRA234_RESET_I2C6>; + reset-names = "i2c"; + }; + + dp_aux_ch2_i2c: i2c@31c0000 { + compatible = "nvidia,tegra194-i2c"; + reg = <0x31c0000 0x100>; + interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + clock-frequency = <100000>; + clocks = <&bpmp TEGRA234_CLK_I2C7 + &bpmp TEGRA234_CLK_PLLP_OUT0>; + assigned-clocks = <&bpmp TEGRA234_CLK_I2C7>; + assigned-clock-parents = <&bpmp TEGRA234_CLK_PLLP_OUT0>; + clock-names = "div-clk", "parent"; + resets = <&bpmp TEGRA234_RESET_I2C7>; + reset-names = "i2c"; + }; + + dp_aux_ch3_i2c: i2c@31e0000 { + compatible = "nvidia,tegra194-i2c"; + reg = <0x31e0000 0x100>; + interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + clock-frequency = <100000>; + clocks = <&bpmp TEGRA234_CLK_I2C9 + &bpmp TEGRA234_CLK_PLLP_OUT0>; + assigned-clocks = <&bpmp TEGRA234_CLK_I2C9>; + assigned-clock-parents = <&bpmp TEGRA234_CLK_PLLP_OUT0>; + clock-names = "div-clk", "parent"; + resets = <&bpmp TEGRA234_RESET_I2C9>; + reset-names = "i2c"; + }; + + pwm1: pwm@3280000 { + compatible = "nvidia,tegra194-pwm", + "nvidia,tegra186-pwm"; + reg = <0x3280000 0x10000>; + clocks = <&bpmp TEGRA234_CLK_PWM1>; + clock-names = "pwm"; + resets = <&bpmp TEGRA234_RESET_PWM1>; + reset-names = "pwm"; + status = "disabled"; + #pwm-cells = <2>; + }; + mmc@3460000 { compatible = "nvidia,tegra234-sdhci", "nvidia,tegra186-sdhci"; reg = <0x03460000 0x20000>; @@ -159,6 +681,7 @@ interconnects = <&mc TEGRA234_MEMORY_CLIENT_SDMMCRAB &emc>, <&mc TEGRA234_MEMORY_CLIENT_SDMMCWAB &emc>; interconnect-names = "dma-mem", "write"; + iommus = <&smmu_niso1 TEGRA234_SID_SDMMC4>; nvidia,pad-autocal-pull-up-offset-hs400 = <0x00>; nvidia,pad-autocal-pull-down-offset-hs400 = <0x00>; nvidia,pad-autocal-pull-up-offset-1v8-timeout = <0x0a>; @@ -172,6 +695,23 @@ status = "disabled"; }; + hda@3510000 { + compatible = "nvidia,tegra234-hda", "nvidia,tegra30-hda"; + reg = <0x3510000 0x10000>; + interrupts = <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&bpmp TEGRA234_CLK_AZA_BIT>, + <&bpmp TEGRA234_CLK_AZA_2XBIT>; + clock-names = "hda", "hda2codec_2x"; + resets = <&bpmp TEGRA234_RESET_HDA>, + <&bpmp TEGRA234_RESET_HDACODEC>; + reset-names = "hda", "hda2codec_2x"; + power-domains = <&bpmp TEGRA234_POWER_DOMAIN_DISP>; + interconnects = <&mc TEGRA234_MEMORY_CLIENT_HDAR &emc>, + <&mc TEGRA234_MEMORY_CLIENT_HDAW &emc>; + interconnect-names = "dma-mem", "write"; + status = "disabled"; + }; + fuse@3810000 { compatible = "nvidia,tegra234-efuse"; reg = <0x03810000 0x10000>; @@ -197,6 +737,148 @@ #mbox-cells = <2>; }; + smmu_niso1: iommu@8000000 { + compatible = "nvidia,tegra234-smmu", "nvidia,smmu-500"; + reg = <0x8000000 0x1000000>, + <0x7000000 0x1000000>; + interrupts = <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 242 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 242 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>; + stream-match-mask = <0x7f80>; + #global-interrupts = <2>; + #iommu-cells = <1>; + + nvidia,memory-controller = <&mc>; + status = "okay"; + }; + hsp_aon: hsp@c150000 { compatible = "nvidia,tegra234-hsp", "nvidia,tegra194-hsp"; reg = <0x0c150000 0x90000>; @@ -212,6 +894,37 @@ #mbox-cells = <2>; }; + gen2_i2c: i2c@c240000 { + compatible = "nvidia,tegra194-i2c"; + reg = <0xc240000 0x100>; + interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + clock-frequency = <100000>; + clocks = <&bpmp TEGRA234_CLK_I2C2 + &bpmp TEGRA234_CLK_PLLP_OUT0>; + clock-names = "div-clk", "parent"; + assigned-clocks = <&bpmp TEGRA234_CLK_I2C2>; + assigned-clock-parents = <&bpmp TEGRA234_CLK_PLLP_OUT0>; + resets = <&bpmp TEGRA234_RESET_I2C2>; + reset-names = "i2c"; + }; + + gen8_i2c: i2c@c250000 { + compatible = "nvidia,tegra194-i2c"; + reg = <0xc250000 0x100>; + nvidia,hw-instance-id = <0x7>; + interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + clock-frequency = <400000>; + clocks = <&bpmp TEGRA234_CLK_I2C8 + &bpmp TEGRA234_CLK_PLLP_OUT0>; + clock-names = "div-clk", "parent"; + assigned-clocks = <&bpmp TEGRA234_CLK_I2C8>; + assigned-clock-parents = <&bpmp TEGRA234_CLK_PLLP_OUT0>; + resets = <&bpmp TEGRA234_RESET_I2C8>; + reset-names = "i2c"; + }; + rtc@c2a0000 { compatible = "nvidia,tegra234-rtc", "nvidia,tegra20-rtc"; reg = <0x0c2a0000 0x10000>; @@ -261,6 +974,288 @@ #interrupt-cells = <3>; interrupt-controller; }; + + smmu_iso: iommu@10000000{ + compatible = "nvidia,tegra234-smmu", "nvidia,smmu-500"; + reg = <0x10000000 0x1000000>; + interrupts = <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>; + stream-match-mask = <0x7f80>; + #global-interrupts = <1>; + #iommu-cells = <1>; + + nvidia,memory-controller = <&mc>; + status = "okay"; + }; + + smmu_niso0: iommu@12000000 { + compatible = "nvidia,tegra234-smmu", "nvidia,smmu-500"; + reg = <0x12000000 0x1000000>, + <0x11000000 0x1000000>; + interrupts = <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 232 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 232 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>; + stream-match-mask = <0x7f80>; + #global-interrupts = <2>; + #iommu-cells = <1>; + + nvidia,memory-controller = <&mc>; + status = "okay"; + }; }; sram@40000000 { @@ -296,6 +1291,7 @@ <&mc TEGRA234_MEMORY_CLIENT_BPMPDMAR &emc>, <&mc TEGRA234_MEMORY_CLIENT_BPMPDMAW &emc>; interconnect-names = "read", "write", "dma-mem", "dma-write"; + iommus = <&smmu_niso1 TEGRA234_SID_BPMP>; bpmp_i2c: i2c { compatible = "nvidia,tegra186-bpmp-i2c"; @@ -692,6 +1688,20 @@ status = "disabled"; }; + sound { + status = "disabled"; + + clocks = <&bpmp TEGRA234_CLK_PLLA>, + <&bpmp TEGRA234_CLK_PLLA_OUT0>; + clock-names = "pll_a", "plla_out0"; + assigned-clocks = <&bpmp TEGRA234_CLK_PLLA>, + <&bpmp TEGRA234_CLK_PLLA_OUT0>, + <&bpmp TEGRA234_CLK_AUD_MCLK>; + assigned-clock-parents = <0>, + <&bpmp TEGRA234_CLK_PLLA>, + <&bpmp TEGRA234_CLK_PLLA_OUT0>; + }; + timer { compatible = "arm,armv8-timer"; interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, diff --git a/arch/arm64/boot/dts/qcom/Makefile b/arch/arm64/boot/dts/qcom/Makefile index f7232052d286..f9e6343acd03 100644 --- a/arch/arm64/boot/dts/qcom/Makefile +++ b/arch/arm64/boot/dts/qcom/Makefile @@ -18,10 +18,11 @@ dtb-$(CONFIG_ARCH_QCOM) += msm8916-samsung-a5u-eur.dtb dtb-$(CONFIG_ARCH_QCOM) += msm8916-samsung-j5.dtb dtb-$(CONFIG_ARCH_QCOM) += msm8916-samsung-serranove.dtb dtb-$(CONFIG_ARCH_QCOM) += msm8916-wingtech-wt88047.dtb -dtb-$(CONFIG_ARCH_QCOM) += msm8992-bullhead-rev-101.dtb +dtb-$(CONFIG_ARCH_QCOM) += msm8992-lg-bullhead-rev-10.dtb +dtb-$(CONFIG_ARCH_QCOM) += msm8992-lg-bullhead-rev-101.dtb dtb-$(CONFIG_ARCH_QCOM) += msm8992-msft-lumia-octagon-talkman.dtb dtb-$(CONFIG_ARCH_QCOM) += msm8992-xiaomi-libra.dtb -dtb-$(CONFIG_ARCH_QCOM) += msm8994-angler-rev-101.dtb +dtb-$(CONFIG_ARCH_QCOM) += msm8994-huawei-angler-rev-101.dtb dtb-$(CONFIG_ARCH_QCOM) += msm8994-msft-lumia-octagon-cityman.dtb dtb-$(CONFIG_ARCH_QCOM) += msm8994-sony-xperia-kitakami-ivy.dtb dtb-$(CONFIG_ARCH_QCOM) += msm8994-sony-xperia-kitakami-karin.dtb @@ -82,7 +83,8 @@ dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-pompom-r3.dtb dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-pompom-r3-lte.dtb dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-r1.dtb dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-r1-lte.dtb -dtb-$(CONFIG_ARCH_QCOM) += sc7280-herobrine.dtb +dtb-$(CONFIG_ARCH_QCOM) += sc7280-herobrine-herobrine-r0.dtb +dtb-$(CONFIG_ARCH_QCOM) += sc7280-herobrine-herobrine-r1.dtb dtb-$(CONFIG_ARCH_QCOM) += sc7280-idp.dtb dtb-$(CONFIG_ARCH_QCOM) += sc7280-idp2.dtb dtb-$(CONFIG_ARCH_QCOM) += sc7280-crd.dtb @@ -90,6 +92,7 @@ dtb-$(CONFIG_ARCH_QCOM) += sdm630-sony-xperia-ganges-kirin.dtb dtb-$(CONFIG_ARCH_QCOM) += sdm630-sony-xperia-nile-discovery.dtb dtb-$(CONFIG_ARCH_QCOM) += sdm630-sony-xperia-nile-pioneer.dtb dtb-$(CONFIG_ARCH_QCOM) += sdm630-sony-xperia-nile-voyager.dtb +dtb-$(CONFIG_ARCH_QCOM) += sdm632-fairphone-fp3.dtb dtb-$(CONFIG_ARCH_QCOM) += sdm636-sony-xperia-ganges-mermaid.dtb dtb-$(CONFIG_ARCH_QCOM) += sdm660-xiaomi-lavender.dtb dtb-$(CONFIG_ARCH_QCOM) += sdm845-cheza-r1.dtb @@ -103,7 +106,9 @@ dtb-$(CONFIG_ARCH_QCOM) += sdm845-sony-xperia-tama-akari.dtb dtb-$(CONFIG_ARCH_QCOM) += sdm845-sony-xperia-tama-akatsuki.dtb dtb-$(CONFIG_ARCH_QCOM) += sdm845-sony-xperia-tama-apollo.dtb dtb-$(CONFIG_ARCH_QCOM) += sdm845-xiaomi-beryllium.dtb +dtb-$(CONFIG_ARCH_QCOM) += sdm845-shift-axolotl.dtb dtb-$(CONFIG_ARCH_QCOM) += sdm850-lenovo-yoga-c630.dtb +dtb-$(CONFIG_ARCH_QCOM) += sdm850-samsung-w737.dtb dtb-$(CONFIG_ARCH_QCOM) += sm6125-sony-xperia-seine-pdx201.dtb dtb-$(CONFIG_ARCH_QCOM) += sm6350-sony-xperia-lena-pdx213.dtb dtb-$(CONFIG_ARCH_QCOM) += sm7225-fairphone-fp4.dtb @@ -121,4 +126,5 @@ dtb-$(CONFIG_ARCH_QCOM) += sm8350-microsoft-surface-duo2.dtb dtb-$(CONFIG_ARCH_QCOM) += sm8350-mtp.dtb dtb-$(CONFIG_ARCH_QCOM) += sm8350-sony-xperia-sagami-pdx214.dtb dtb-$(CONFIG_ARCH_QCOM) += sm8350-sony-xperia-sagami-pdx215.dtb +dtb-$(CONFIG_ARCH_QCOM) += sm8450-hdk.dtb dtb-$(CONFIG_ARCH_QCOM) += sm8450-qrd.dtb diff --git a/arch/arm64/boot/dts/qcom/apq8016-sbc.dts b/arch/arm64/boot/dts/qcom/apq8016-sbc.dts index a5320d6d30e7..7c1eab605c15 100644 --- a/arch/arm64/boot/dts/qcom/apq8016-sbc.dts +++ b/arch/arm64/boot/dts/qcom/apq8016-sbc.dts @@ -253,7 +253,6 @@ port@0 { reg = <0>; csiphy0_ep: endpoint { - clock-lanes = <1>; data-lanes = <0 2>; remote-endpoint = <&ov5640_ep>; status = "okay"; @@ -289,7 +288,6 @@ port { ov5640_ep: endpoint { - clock-lanes = <1>; data-lanes = <0 2>; remote-endpoint = <&csiphy0_ep>; }; @@ -351,12 +349,12 @@ pinctrl-0 = <&cdc_pdm_lines_act &ext_sec_tlmm_lines_act &ext_mclk_tlmm_lines_act>; pinctrl-1 = <&cdc_pdm_lines_sus &ext_sec_tlmm_lines_sus &ext_mclk_tlmm_lines_sus>; pinctrl-names = "default", "sleep"; - qcom,model = "DB410c"; - qcom,audio-routing = + model = "DB410c"; + audio-routing = "AMIC2", "MIC BIAS Internal2", "AMIC3", "MIC BIAS External1"; - external-dai-link@0 { + quaternary-dai-link { link-name = "ADV7533"; cpu { sound-dai = <&lpass MI2S_QUATERNARY>; @@ -366,7 +364,7 @@ }; }; - internal-codec-playback-dai-link@0 { + primary-dai-link { link-name = "WCD"; cpu { sound-dai = <&lpass MI2S_PRIMARY>; @@ -376,7 +374,7 @@ }; }; - internal-codec-capture-dai-link@0 { + tertiary-dai-link { link-name = "WCD-Capture"; cpu { sound-dai = <&lpass MI2S_TERTIARY>; diff --git a/arch/arm64/boot/dts/qcom/ipq6018.dtsi b/arch/arm64/boot/dts/qcom/ipq6018.dtsi index 66ec5615651d..4e7efa97724b 100644 --- a/arch/arm64/boot/dts/qcom/ipq6018.dtsi +++ b/arch/arm64/boot/dts/qcom/ipq6018.dtsi @@ -373,6 +373,8 @@ intc: interrupt-controller@b000000 { compatible = "qcom,msm-qgic2"; + #address-cells = <2>; + #size-cells = <2>; interrupt-controller; #interrupt-cells = <0x3>; reg = <0x0 0x0b000000 0x0 0x1000>, /*GICD*/ @@ -380,6 +382,13 @@ <0x0 0x0b001000 0x0 0x1000>, /*GICH*/ <0x0 0x0b004000 0x0 0x1000>; /*GICV*/ interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>; + ranges = <0 0 0 0xb00a000 0 0xffd>; + + v2m@0 { + compatible = "arm,gic-v2m-frame"; + msi-controller; + reg = <0x0 0x0 0x0 0xffd>; + }; }; pcie_phy: phy@84000 { @@ -425,6 +434,7 @@ linux,pci-domain = <0>; bus-range = <0x00 0xff>; num-lanes = <1>; + max-link-speed = <3>; #address-cells = <3>; #size-cells = <2>; @@ -520,7 +530,6 @@ ranges; compatible = "arm,armv7-timer-mem"; reg = <0x0 0x0b120000 0x0 0x1000>; - clock-frequency = <19200000>; frame@b120000 { frame-number = <0>; @@ -748,7 +757,7 @@ snps,hird-threshold = /bits/ 8 <0x0>; snps,dis_u2_susphy_quirk; snps,dis_u3_susphy_quirk; - snps,ref-clock-period-ns = <0x32>; + snps,ref-clock-period-ns = <0x29>; dr_mode = "host"; }; }; diff --git a/arch/arm64/boot/dts/qcom/ipq8074.dtsi b/arch/arm64/boot/dts/qcom/ipq8074.dtsi index e6cc261201ef..d80b1cefab10 100644 --- a/arch/arm64/boot/dts/qcom/ipq8074.dtsi +++ b/arch/arm64/boot/dts/qcom/ipq8074.dtsi @@ -76,6 +76,25 @@ method = "smc"; }; + reserved-memory { + #address-cells = <2>; + #size-cells = <2>; + ranges; + + smem@4ab00000 { + compatible = "qcom,smem"; + reg = <0x0 0x4ab00000 0x0 0x00100000>; + no-map; + + hwlocks = <&tcsr_mutex 0>; + }; + + memory@4ac00000 { + no-map; + reg = <0x0 0x4ac00000 0x0 0x00400000>; + }; + }; + firmware { scm { compatible = "qcom,scm-ipq8074", "qcom,scm"; @@ -331,6 +350,12 @@ #reset-cells = <0x1>; }; + tcsr_mutex: hwlock@1905000 { + compatible = "qcom,tcsr-mutex"; + reg = <0x01905000 0x20000>; + #hwlock-cells = <1>; + }; + spmi_bus: spmi@200f000 { compatible = "qcom,spmi-pmic-arb"; reg = <0x0200f000 0x001000>, @@ -609,9 +634,18 @@ intc: interrupt-controller@b000000 { compatible = "qcom,msm-qgic2"; + #address-cells = <1>; + #size-cells = <1>; interrupt-controller; #interrupt-cells = <0x3>; reg = <0x0b000000 0x1000>, <0x0b002000 0x1000>; + ranges = <0 0xb00a000 0xffd>; + + v2m@0 { + compatible = "arm,gic-v2m-frame"; + msi-controller; + reg = <0x0 0xffd>; + }; }; timer { @@ -636,7 +670,6 @@ ranges; compatible = "arm,armv7-timer-mem"; reg = <0x0b120000 0x1000>; - clock-frequency = <19200000>; frame@b120000 { frame-number = <0>; diff --git a/arch/arm64/boot/dts/qcom/msm8916-longcheer-l8150.dts b/arch/arm64/boot/dts/qcom/msm8916-longcheer-l8150.dts index 852de624f5af..b3836dde8a54 100644 --- a/arch/arm64/boot/dts/qcom/msm8916-longcheer-l8150.dts +++ b/arch/arm64/boot/dts/qcom/msm8916-longcheer-l8150.dts @@ -151,6 +151,21 @@ vddio-supply = <&pm8916_l6>; }; + light-sensor@23 { + compatible = "liteon,ltr559"; + reg = <0x23>; + proximity-near-level = <75>; + + interrupt-parent = <&msmgpio>; + interrupts = <115 IRQ_TYPE_EDGE_FALLING>; + + pinctrl-names = "default"; + pinctrl-0 = <&light_int_default>; + + vdd-supply = <&pm8916_l17>; + vio-supply = <&pm8916_l6>; + }; + gyroscope@68 { compatible = "bosch,bmg160"; reg = <0x68>; @@ -392,6 +407,14 @@ bias-disable; }; + light_int_default: light-int-default { + pins = "gpio115"; + function = "gpio"; + + drive-strength = <2>; + bias-disable; + }; + magn_int_default: magn-int-default { pins = "gpio113"; function = "gpio"; diff --git a/arch/arm64/boot/dts/qcom/msm8916-samsung-j5.dts b/arch/arm64/boot/dts/qcom/msm8916-samsung-j5.dts index 687bea438a57..6c408d61de75 100644 --- a/arch/arm64/boot/dts/qcom/msm8916-samsung-j5.dts +++ b/arch/arm64/boot/dts/qcom/msm8916-samsung-j5.dts @@ -41,7 +41,7 @@ }; home-key { - lable = "Home Key"; + label = "Home Key"; gpios = <&msmgpio 109 GPIO_ACTIVE_LOW>; linux,code = <KEY_HOMEPAGE>; }; diff --git a/arch/arm64/boot/dts/qcom/msm8916.dtsi b/arch/arm64/boot/dts/qcom/msm8916.dtsi index 41897eb3736a..0a0be43529f6 100644 --- a/arch/arm64/boot/dts/qcom/msm8916.dtsi +++ b/arch/arm64/boot/dts/qcom/msm8916.dtsi @@ -1731,8 +1731,10 @@ clock-names = "ref", "sleep"; resets = <&gcc GCC_USB2A_PHY_BCR>, <&usb 0>; reset-names = "phy", "por"; - qcom,init-seq = /bits/ 8 <0x0 0x44 - 0x1 0x6b 0x2 0x24 0x3 0x13>; + qcom,init-seq = /bits/ 8 <0x0 0x44>, + <0x1 0x6b>, + <0x2 0x24>, + <0x3 0x13>; }; }; }; diff --git a/arch/arm64/boot/dts/qcom/msm8953.dtsi b/arch/arm64/boot/dts/qcom/msm8953.dtsi new file mode 100644 index 000000000000..431228faacdd --- /dev/null +++ b/arch/arm64/boot/dts/qcom/msm8953.dtsi @@ -0,0 +1,1326 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* Copyright (c) 2022, The Linux Foundation. All rights reserved. */ + +#include <dt-bindings/clock/qcom,gcc-msm8953.h> +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/interrupt-controller/arm-gic.h> +#include <dt-bindings/power/qcom-rpmpd.h> +#include <dt-bindings/thermal/thermal.h> + +/ { + interrupt-parent = <&intc>; + + #address-cells = <2>; + #size-cells = <2>; + + chosen { }; + + clocks { + sleep_clk: sleep-clk { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <32768>; + }; + + xo_board: xo-board { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <19200000>; + clock-output-names = "xo"; + }; + }; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + CPU0: cpu@0 { + device_type = "cpu"; + compatible = "arm,cortex-a53"; + reg = <0x0>; + enable-method = "psci"; + capacity-dmips-mhz = <1024>; + next-level-cache = <&L2_0>; + #cooling-cells = <2>; + + l1-icache { + compatible = "cache"; + }; + l1-dcache { + compatible = "cache"; + }; + }; + + CPU1: cpu@1 { + device_type = "cpu"; + compatible = "arm,cortex-a53"; + reg = <0x1>; + enable-method = "psci"; + capacity-dmips-mhz = <1024>; + next-level-cache = <&L2_0>; + #cooling-cells = <2>; + + l1-icache { + compatible = "cache"; + }; + l1-dcache { + compatible = "cache"; + }; + }; + + CPU2: cpu@2 { + device_type = "cpu"; + compatible = "arm,cortex-a53"; + reg = <0x2>; + enable-method = "psci"; + capacity-dmips-mhz = <1024>; + next-level-cache = <&L2_0>; + #cooling-cells = <2>; + + l1-icache { + compatible = "cache"; + }; + l1-dcache { + compatible = "cache"; + }; + }; + + CPU3: cpu@3 { + device_type = "cpu"; + compatible = "arm,cortex-a53"; + reg = <0x3>; + enable-method = "psci"; + capacity-dmips-mhz = <1024>; + next-level-cache = <&L2_0>; + #cooling-cells = <2>; + + l1-icache { + compatible = "cache"; + }; + l1-dcache { + compatible = "cache"; + }; + }; + + CPU4: cpu@100 { + device_type = "cpu"; + compatible = "arm,cortex-a53"; + reg = <0x100>; + enable-method = "psci"; + capacity-dmips-mhz = <1024>; + next-level-cache = <&L2_1>; + #cooling-cells = <2>; + + l1-icache { + compatible = "cache"; + }; + l1-dcache { + compatible = "cache"; + }; + }; + + CPU5: cpu@101 { + device_type = "cpu"; + compatible = "arm,cortex-a53"; + reg = <0x101>; + enable-method = "psci"; + capacity-dmips-mhz = <1024>; + next-level-cache = <&L2_1>; + #cooling-cells = <2>; + + l1-icache { + compatible = "cache"; + }; + l1-dcache { + compatible = "cache"; + }; + }; + + CPU6: cpu@102 { + device_type = "cpu"; + compatible = "arm,cortex-a53"; + reg = <0x102>; + enable-method = "psci"; + capacity-dmips-mhz = <1024>; + next-level-cache = <&L2_1>; + #cooling-cells = <2>; + + l1-icache { + compatible = "cache"; + }; + l1-dcache { + compatible = "cache"; + }; + }; + + CPU7: cpu@103 { + device_type = "cpu"; + compatible = "arm,cortex-a53"; + reg = <0x103>; + enable-method = "psci"; + capacity-dmips-mhz = <1024>; + next-level-cache = <&L2_1>; + #cooling-cells = <2>; + + l1-icache { + compatible = "cache"; + }; + l1-dcache { + compatible = "cache"; + }; + }; + + cpu-map { + cluster0 { + core0 { + cpu = <&CPU0>; + }; + core1 { + cpu = <&CPU1>; + }; + core2 { + cpu = <&CPU2>; + }; + core3 { + cpu = <&CPU3>; + }; + }; + + cluster1 { + core0 { + cpu = <&CPU4>; + }; + core1 { + cpu = <&CPU5>; + }; + core2 { + cpu = <&CPU6>; + }; + core3 { + cpu = <&CPU7>; + }; + }; + }; + + L2_0: l2-cache_0 { + compatible = "cache"; + cache-level = <2>; + }; + + L2_1: l2-cache_1 { + compatible = "cache"; + cache-level = <2>; + }; + }; + + firmware { + scm: scm { + compatible = "qcom,scm-msm8953"; + clocks = <&gcc GCC_CRYPTO_CLK>, + <&gcc GCC_CRYPTO_AXI_CLK>, + <&gcc GCC_CRYPTO_AHB_CLK>; + clock-names = "core", "bus", "iface"; + #reset-cells = <1>; + }; + }; + + memory { + device_type = "memory"; + /* We expect the bootloader to fill in the reg */ + reg = <0 0 0 0>; + }; + + pmu { + compatible = "arm,cortex-a53-pmu"; + interrupts = <GIC_PPI 7 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_HIGH)>; + }; + + psci { + compatible = "arm,psci-1.0"; + method = "smc"; + }; + + reserved-memory { + #address-cells = <2>; + #size-cells = <2>; + ranges; + + zap_shader_region: memory@81800000 { + compatible = "shared-dma-pool"; + reg = <0x0 0x81800000 0x0 0x2000>; + no-map; + }; + + memory@85b00000 { + reg = <0x0 0x85b00000 0x0 0x800000>; + no-map; + }; + + smem_mem: memory@86300000 { + compatible = "qcom,smem"; + reg = <0x0 0x86300000 0x0 0x100000>; + qcom,rpm-msg-ram = <&rpm_msg_ram>; + hwlocks = <&tcsr_mutex 3>; + no-map; + }; + + memory@86400000 { + reg = <0x0 0x86400000 0x0 0x400000>; + no-map; + }; + + mpss_mem: memory@86c00000 { + reg = <0x0 0x86c00000 0x0 0x6a00000>; + no-map; + }; + + adsp_fw_mem: memory@8d600000 { + reg = <0x0 0x8d600000 0x0 0x1100000>; + no-map; + }; + + wcnss_fw_mem: memory@8e700000 { + reg = <0x0 0x8e700000 0x0 0x700000>; + no-map; + }; + + memory@90000000 { + reg = <0 0x90000000 0 0x1000>; + no-map; + }; + + memory@90001000 { + reg = <0x0 0x90001000 0x0 0x13ff000>; + no-map; + }; + + venus_mem: memory@91400000 { + reg = <0x0 0x91400000 0x0 0x700000>; + no-map; + }; + + mba_mem: memory@92000000 { + reg = <0x0 0x92000000 0x0 0x100000>; + no-map; + }; + + memory@f2d00000 { + compatible = "qcom,rmtfs-mem"; + reg = <0x0 0xf2d00000 0x0 0x180000>; + no-map; + + qcom,client-id = <1>; + }; + }; + + smd { + compatible = "qcom,smd"; + + rpm { + interrupts = <GIC_SPI 168 IRQ_TYPE_EDGE_RISING>; + qcom,ipc = <&apcs 8 0>; + qcom,smd-edge = <15>; + + rpm_requests: rpm_requests { + compatible = "qcom,rpm-msm8953"; + qcom,smd-channels = "rpm_requests"; + + rpmcc: rpmcc { + compatible = "qcom,rpmcc-msm8953"; + clocks = <&xo_board>; + clock-names = "xo"; + #clock-cells = <1>; + }; + + rpmpd: power-controller { + compatible = "qcom,msm8953-rpmpd"; + #power-domain-cells = <1>; + operating-points-v2 = <&rpmpd_opp_table>; + + clocks = <&xo_board>; + clock-names = "ref"; + + rpmpd_opp_table: opp-table { + compatible = "operating-points-v2"; + + rpmpd_opp_ret: opp1 { + opp-level = <RPM_SMD_LEVEL_RETENTION>; + }; + + rpmpd_opp_ret_plus: opp2 { + opp-level = <RPM_SMD_LEVEL_RETENTION_PLUS>; + }; + + rpmpd_opp_min_svs: opp3 { + opp-level = <RPM_SMD_LEVEL_MIN_SVS>; + }; + + rpmpd_opp_low_svs: opp4 { + opp-level = <RPM_SMD_LEVEL_LOW_SVS>; + }; + + rpmpd_opp_svs: opp5 { + opp-level = <RPM_SMD_LEVEL_SVS>; + }; + + rpmpd_opp_svs_plus: opp6 { + opp-level = <RPM_SMD_LEVEL_SVS_PLUS>; + }; + + rpmpd_opp_nom: opp7 { + opp-level = <RPM_SMD_LEVEL_NOM>; + }; + + rpmpd_opp_nom_plus: opp8 { + opp-level = <RPM_SMD_LEVEL_NOM_PLUS>; + }; + + rpmpd_opp_turbo: opp9 { + opp-level = <RPM_SMD_LEVEL_TURBO>; + }; + }; + }; + }; + }; + }; + + smsm { + compatible = "qcom,smsm"; + + #address-cells = <1>; + #size-cells = <0>; + + qcom,ipc-1 = <&apcs 8 13>; + qcom,ipc-3 = <&apcs 8 19>; + + apps_smsm: apps@0 { + reg = <0>; + + #qcom,smem-state-cells = <1>; + }; + }; + + soc: soc@0 { + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0 0 0xffffffff>; + compatible = "simple-bus"; + + rpm_msg_ram: sram@60000 { + compatible = "qcom,rpm-msg-ram"; + reg = <0x60000 0x8000>; + }; + + hsusb_phy: phy@79000 { + compatible = "qcom,msm8953-qusb2-phy"; + reg = <0x79000 0x180>; + #phy-cells = <0>; + + clocks = <&gcc GCC_USB_PHY_CFG_AHB_CLK>, + <&gcc GCC_QUSB_REF_CLK>; + clock-names = "cfg_ahb", "ref"; + + qcom,tcsr-syscon = <&tcsr_phy_clk_scheme_sel>; + + resets = <&gcc GCC_QUSB2_PHY_BCR>; + + status = "disabled"; + }; + + rng@e3000 { + compatible = "qcom,prng"; + reg = <0x000e3000 0x1000>; + clocks = <&gcc GCC_PRNG_AHB_CLK>; + clock-names = "core"; + }; + + tsens0: thermal-sensor@4a9000 { + compatible = "qcom,msm8953-tsens", "qcom,tsens-v2"; + reg = <0x4a9000 0x1000>, /* TM */ + <0x4a8000 0x1000>; /* SROT */ + #qcom,sensors = <16>; + interrupts = <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 314 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "uplow", "critical"; + #thermal-sensor-cells = <1>; + }; + + restart@4ab000 { + compatible = "qcom,pshold"; + reg = <0x4ab000 0x4>; + }; + + tlmm: pinctrl@1000000 { + compatible = "qcom,msm8953-pinctrl"; + reg = <0x1000000 0x300000>; + interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>; + gpio-controller; + gpio-ranges = <&tlmm 0 0 155>; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + + uart_console_active: uart-console-active-pins { + pins = "gpio4", "gpio5"; + function = "blsp_uart2"; + drive-strength = <2>; + bias-disable; + }; + + uart_console_sleep: uart-console-sleep-pins { + pins = "gpio4", "gpio5"; + function = "blsp_uart2"; + drive-strength = <2>; + bias-pull-down; + }; + + sdc1_clk_on: sdc1-clk-on-pins { + pins = "sdc1_clk"; + bias-disable; + drive-strength = <16>; + }; + + sdc1_clk_off: sdc1-clk-off-pins { + pins = "sdc1_clk"; + bias-disable; + drive-strength = <2>; + }; + + sdc1_cmd_on: sdc1-cmd-on-pins { + pins = "sdc1_cmd"; + bias-disable; + drive-strength = <10>; + }; + + sdc1_cmd_off: sdc1-cmd-off-pins { + pins = "sdc1_cmd"; + bias-disable; + drive-strength = <2>; + }; + + sdc1_data_on: sdc1-data-on-pins { + pins = "sdc1_data"; + bias-pull-up; + drive-strength = <10>; + }; + + sdc1_data_off: sdc1-data-off-pins { + pins = "sdc1_data"; + bias-pull-up; + drive-strength = <2>; + }; + + sdc1_rclk_on: sdc1-rclk-on-pins { + pins = "sdc1_rclk"; + bias-pull-down; + }; + + sdc1_rclk_off: sdc1-rclk-off-pins { + pins = "sdc1_rclk"; + bias-pull-down; + }; + + sdc2_clk_on: sdc2-clk-on-pins { + pins = "sdc2_clk"; + drive-strength = <16>; + bias-disable; + }; + + sdc2_clk_off: sdc2-clk-off-pins { + pins = "sdc2_clk"; + bias-disable; + drive-strength = <2>; + }; + + sdc2_cmd_on: sdc2-cmd-on-pins { + pins = "sdc2_cmd"; + bias-pull-up; + drive-strength = <10>; + }; + + sdc2_cmd_off: sdc2-cmd-off-pins { + pins = "sdc2_cmd"; + bias-pull-up; + drive-strength = <2>; + }; + + sdc2_data_on: sdc2-data-on-pins { + pins = "sdc2_data"; + bias-pull-up; + drive-strength = <10>; + }; + + sdc2_data_off: sdc2-data-off-pins { + pins = "sdc2_data"; + bias-pull-up; + drive-strength = <2>; + }; + + sdc2_cd_on: cd-on-pins { + pins = "gpio133"; + function = "gpio"; + drive-strength = <2>; + bias-pull-up; + }; + + sdc2_cd_off: cd-off-pins { + pins = "gpio133"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + + gpio_key_default: gpio-key-default-pins { + pins = "gpio85"; + function = "gpio"; + drive-strength = <2>; + bias-pull-up; + }; + + i2c_1_default: i2c-1-default-pins { + pins = "gpio2", "gpio3"; + function = "blsp_i2c1"; + drive-strength = <2>; + bias-disable; + }; + + i2c_1_sleep: i2c-1-sleep-pins { + pins = "gpio2", "gpio3"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + + i2c_2_default: i2c-2-default-pins { + pins = "gpio6", "gpio7"; + function = "blsp_i2c2"; + drive-strength = <2>; + bias-disable; + }; + + i2c_2_sleep: i2c-2-sleep-pins { + pins = "gpio6", "gpio7"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + + i2c_3_default: i2c-3-default-pins { + pins = "gpio10", "gpio11"; + function = "blsp_i2c3"; + drive-strength = <2>; + bias-disable; + }; + + i2c_3_sleep: i2c-3-sleep-pins { + pins = "gpio10", "gpio11"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + + i2c_4_default: i2c-4-default-pins { + pins = "gpio14", "gpio15"; + function = "blsp_i2c4"; + drive-strength = <2>; + bias-disable; + }; + + i2c_4_sleep: i2c-4-sleep-pins { + pins = "gpio14", "gpio15"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + + i2c_5_default: i2c-5-default-pins { + pins = "gpio18", "gpio19"; + function = "blsp_i2c5"; + drive-strength = <2>; + bias-disable; + }; + + i2c_5_sleep: i2c-5-sleep-pins { + pins = "gpio18", "gpio19"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + + i2c_6_default: i2c-6-default-pins { + pins = "gpio22", "gpio23"; + function = "blsp_i2c6"; + drive-strength = <2>; + bias-disable; + }; + + i2c_6_sleep: i2c-6-sleep-pins { + pins = "gpio22", "gpio23"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + + i2c_7_default: i2c-7-default-pins { + pins = "gpio135", "gpio136"; + function = "blsp_i2c7"; + drive-strength = <2>; + bias-disable; + }; + + i2c_7_sleep: i2c-7-sleep-pins { + pins = "gpio135", "gpio136"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + + i2c_8_default: i2c-8-default-pins { + pins = "gpio98", "gpio99"; + function = "blsp_i2c8"; + drive-strength = <2>; + bias-disable; + }; + + i2c_8_sleep: i2c-8-sleep-pins { + pins = "gpio98", "gpio99"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + }; + + gcc: clock-controller@1800000 { + compatible = "qcom,gcc-msm8953"; + reg = <0x1800000 0x80000>; + #clock-cells = <1>; + #reset-cells = <1>; + #power-domain-cells = <1>; + clocks = <&xo_board>, + <&sleep_clk>, + <0>, + <0>, + <0>, + <0>; + clock-names = "xo", + "sleep", + "dsi0pll", + "dsi0pllbyte", + "dsi1pll", + "dsi1pllbyte"; + }; + + tcsr_mutex: hwlock@1905000 { + compatible = "qcom,tcsr-mutex"; + reg = <0x1905000 0x20000>; + #hwlock-cells = <1>; + }; + + tcsr: syscon@1937000 { + compatible = "qcom,tcsr-msm8953", "syscon"; + reg = <0x1937000 0x30000>; + }; + + tcsr_phy_clk_scheme_sel: syscon@193f044 { + compatible = "syscon"; + reg = <0x193f044 0x4>; + }; + + spmi_bus: spmi@200f000 { + compatible = "qcom,spmi-pmic-arb"; + reg = <0x200f000 0x1000>, + <0x2400000 0x800000>, + <0x2c00000 0x800000>, + <0x3800000 0x200000>, + <0x200a000 0x2100>; + reg-names = "core", "chnls", "obsrvr", "intr", "cnfg"; + interrupt-names = "periph_irq"; + interrupts = <GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>; + qcom,ee = <0>; + qcom,channel = <0>; + interrupt-controller; + + #interrupt-cells = <4>; + #address-cells = <2>; + #size-cells = <0>; + }; + + usb3: usb@70f8800 { + compatible = "qcom,msm8953-dwc3", "qcom,dwc3"; + reg = <0x70f8800 0x400>; + #address-cells = <1>; + #size-cells = <1>; + ranges; + + interrupts = <GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 220 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "hs_phy_irq", "ss_phy_irq"; + + clocks = <&gcc GCC_USB_PHY_CFG_AHB_CLK>, + <&gcc GCC_USB30_MASTER_CLK>, + <&gcc GCC_PCNOC_USB3_AXI_CLK>, + <&gcc GCC_USB30_MOCK_UTMI_CLK>, + <&gcc GCC_USB30_SLEEP_CLK>; + clock-names = "cfg_noc", "core", "iface", + "mock_utmi", "sleep"; + + assigned-clocks = <&gcc GCC_USB30_MOCK_UTMI_CLK>, + <&gcc GCC_USB30_MASTER_CLK>; + assigned-clock-rates = <19200000>, <133330000>; + + power-domains = <&gcc USB30_GDSC>; + + qcom,select-utmi-as-pipe-clk; + + status = "disabled"; + + usb3_dwc3: usb@7000000 { + compatible = "snps,dwc3"; + reg = <0x07000000 0xcc00>; + interrupts = <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>; + phys = <&hsusb_phy>; + phy-names = "usb2-phy"; + + snps,usb2-gadget-lpm-disable; + snps,dis-u1-entry-quirk; + snps,dis-u2-entry-quirk; + snps,is-utmi-l1-suspend; + snps,hird-threshold = /bits/ 8 <0x00>; + + maximum-speed = "high-speed"; + phy_mode = "utmi"; + }; + }; + + sdhc_1: sdhci@7824900 { + compatible = "qcom,msm8953-sdhci", "qcom,sdhci-msm-v4"; + + reg = <0x7824900 0x500>, <0x7824000 0x800>; + reg-names = "hc_mem", "core_mem"; + + interrupts = <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "hc_irq", "pwr_irq"; + + clocks = <&gcc GCC_SDCC1_AHB_CLK>, + <&gcc GCC_SDCC1_APPS_CLK>, + <&xo_board>; + clock-names = "iface", "core", "xo"; + + power-domains = <&rpmpd MSM8953_VDDCX>; + operating-points-v2 = <&sdhc1_opp_table>; + + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&sdc1_clk_on &sdc1_cmd_on &sdc1_data_on &sdc1_rclk_on>; + pinctrl-1 = <&sdc1_clk_off &sdc1_cmd_off &sdc1_data_off &sdc1_rclk_off>; + + mmc-hs400-1_8v; + mmc-hs200-1_8v; + mmc-ddr-1_8v; + bus-width = <8>; + non-removable; + + status = "disabled"; + + sdhc1_opp_table: opp-table-sdhc1 { + compatible = "operating-points-v2"; + + opp-25000000 { + opp-hz = /bits/ 64 <25000000>; + required-opps = <&rpmpd_opp_low_svs>; + }; + + opp-50000000 { + opp-hz = /bits/ 64 <50000000>; + required-opps = <&rpmpd_opp_svs>; + }; + + opp-100000000 { + opp-hz = /bits/ 64 <100000000>; + required-opps = <&rpmpd_opp_svs>; + }; + + opp-192000000 { + opp-hz = /bits/ 64 <192000000>; + required-opps = <&rpmpd_opp_nom>; + }; + + opp-384000000 { + opp-hz = /bits/ 64 <384000000>; + required-opps = <&rpmpd_opp_nom>; + }; + }; + }; + + sdhc_2: sdhci@7864900 { + compatible = "qcom,msm8953-sdhci", "qcom,sdhci-msm-v4"; + + reg = <0x7864900 0x500>, <0x7864000 0x800>; + reg-names = "hc_mem", "core_mem"; + + interrupts = <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 221 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "hc_irq", "pwr_irq"; + + clocks = <&gcc GCC_SDCC2_AHB_CLK>, + <&gcc GCC_SDCC2_APPS_CLK>, + <&xo_board>; + clock-names = "iface", "core", "xo"; + + power-domains = <&rpmpd MSM8953_VDDCX>; + operating-points-v2 = <&sdhc2_opp_table>; + + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&sdc2_clk_on &sdc2_cmd_on &sdc2_data_on>; + pinctrl-1 = <&sdc2_clk_off &sdc2_cmd_off &sdc2_data_off>; + + bus-width = <4>; + + status = "disabled"; + + sdhc2_opp_table: opp-table-sdhc2 { + compatible = "operating-points-v2"; + + opp-25000000 { + opp-hz = /bits/ 64 <25000000>; + required-opps = <&rpmpd_opp_low_svs>; + }; + + opp-50000000 { + opp-hz = /bits/ 64 <50000000>; + required-opps = <&rpmpd_opp_svs>; + }; + + opp-100000000 { + opp-hz = /bits/ 64 <100000000>; + required-opps = <&rpmpd_opp_svs>; + }; + + opp-177770000 { + opp-hz = /bits/ 64 <177770000>; + required-opps = <&rpmpd_opp_nom>; + }; + + opp-200000000 { + opp-hz = /bits/ 64 <200000000>; + required-opps = <&rpmpd_opp_nom>; + }; + }; + }; + + uart_0: serial@78af000 { + compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm"; + reg = <0x78af000 0x200>; + interrupts = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GCC_BLSP1_UART1_APPS_CLK>, + <&gcc GCC_BLSP1_AHB_CLK>; + clock-names = "core", "iface"; + + status = "disabled"; + }; + + i2c_1: i2c@78b5000 { + compatible = "qcom,i2c-qup-v2.2.1"; + reg = <0x78b5000 0x600>; + interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>; + clock-names = "iface", "core"; + clocks = <&gcc GCC_BLSP1_AHB_CLK>, + <&gcc GCC_BLSP1_QUP1_I2C_APPS_CLK>; + + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&i2c_1_default>; + pinctrl-1 = <&i2c_1_sleep>; + + #address-cells = <1>; + #size-cells = <0>; + + status = "disabled"; + }; + + i2c_2: i2c@78b6000 { + compatible = "qcom,i2c-qup-v2.2.1"; + reg = <0x78b6000 0x600>; + interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>; + clock-names = "iface", "core"; + clocks = <&gcc GCC_BLSP1_AHB_CLK>, + <&gcc GCC_BLSP1_QUP2_I2C_APPS_CLK>; + + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&i2c_2_default>; + pinctrl-1 = <&i2c_2_sleep>; + + #address-cells = <1>; + #size-cells = <0>; + + status = "disabled"; + }; + + i2c_3: i2c@78b7000 { + compatible = "qcom,i2c-qup-v2.2.1"; + reg = <0x78b7000 0x600>; + interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>; + clock-names = "iface", "core"; + clocks = <&gcc GCC_BLSP1_AHB_CLK>, + <&gcc GCC_BLSP1_QUP3_I2C_APPS_CLK>; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&i2c_3_default>; + pinctrl-1 = <&i2c_3_sleep>; + + #address-cells = <1>; + #size-cells = <0>; + + status = "disabled"; + }; + + i2c_4: i2c@78b8000 { + compatible = "qcom,i2c-qup-v2.2.1"; + reg = <0x78b8000 0x600>; + interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>; + clock-names = "iface", "core"; + clocks = <&gcc GCC_BLSP1_AHB_CLK>, + <&gcc GCC_BLSP1_QUP4_I2C_APPS_CLK>; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&i2c_4_default>; + pinctrl-1 = <&i2c_4_sleep>; + + #address-cells = <1>; + #size-cells = <0>; + + status = "disabled"; + }; + + i2c_5: i2c@7af5000 { + compatible = "qcom,i2c-qup-v2.2.1"; + reg = <0x7af5000 0x600>; + interrupts = <GIC_SPI 299 IRQ_TYPE_LEVEL_HIGH>; + clock-names = "iface", "core"; + clocks = <&gcc GCC_BLSP2_AHB_CLK>, + <&gcc GCC_BLSP2_QUP1_I2C_APPS_CLK>; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&i2c_5_default>; + pinctrl-1 = <&i2c_5_sleep>; + + #address-cells = <1>; + #size-cells = <0>; + + status = "disabled"; + }; + + i2c_6: i2c@7af6000 { + compatible = "qcom,i2c-qup-v2.2.1"; + reg = <0x7af6000 0x600>; + interrupts = <GIC_SPI 300 IRQ_TYPE_LEVEL_HIGH>; + clock-names = "iface", "core"; + clocks = <&gcc GCC_BLSP2_AHB_CLK>, + <&gcc GCC_BLSP2_QUP2_I2C_APPS_CLK>; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&i2c_6_default>; + pinctrl-1 = <&i2c_6_sleep>; + + #address-cells = <1>; + #size-cells = <0>; + + status = "disabled"; + }; + + i2c_7: i2c@7af7000 { + compatible = "qcom,i2c-qup-v2.2.1"; + reg = <0x7af7000 0x600>; + interrupts = <GIC_SPI 301 IRQ_TYPE_LEVEL_HIGH>; + clock-names = "iface", "core"; + clocks = <&gcc GCC_BLSP2_AHB_CLK>, + <&gcc GCC_BLSP2_QUP3_I2C_APPS_CLK>; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&i2c_7_default>; + pinctrl-1 = <&i2c_7_sleep>; + + #address-cells = <1>; + #size-cells = <0>; + + status = "disabled"; + }; + + i2c_8: i2c@7af8000 { + compatible = "qcom,i2c-qup-v2.2.1"; + reg = <0x7af8000 0x600>; + interrupts = <GIC_SPI 302 IRQ_TYPE_LEVEL_HIGH>; + clock-names = "iface", "core"; + clocks = <&gcc GCC_BLSP2_AHB_CLK>, + <&gcc GCC_BLSP2_QUP4_I2C_APPS_CLK>; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&i2c_8_default>; + pinctrl-1 = <&i2c_8_sleep>; + + #address-cells = <1>; + #size-cells = <0>; + + status = "disabled"; + }; + + intc: interrupt-controller@b000000 { + compatible = "qcom,msm-qgic2"; + interrupt-controller; + #interrupt-cells = <3>; + reg = <0x0b000000 0x1000>, <0x0b002000 0x1000>; + }; + + apcs: mailbox@b011000 { + compatible = "qcom,msm8953-apcs-kpss-global", "syscon"; + reg = <0xb011000 0x1000>; + #mbox-cells = <1>; + }; + + timer@b120000 { + compatible = "arm,armv7-timer-mem"; + reg = <0xb120000 0x1000>; + #address-cells = <0x01>; + #size-cells = <0x01>; + ranges; + + frame@b121000 { + frame-number = <0>; + interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>; + reg = <0xb121000 0x1000>, + <0xb122000 0x1000>; + }; + + frame@b123000 { + frame-number = <1>; + interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>; + reg = <0xb123000 0x1000>; + status = "disabled"; + }; + + frame@b124000 { + frame-number = <2>; + interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>; + reg = <0xb124000 0x1000>; + status = "disabled"; + }; + + frame@b125000 { + frame-number = <3>; + interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>; + reg = <0xb125000 0x1000>; + status = "disabled"; + }; + + frame@b126000 { + frame-number = <4>; + interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>; + reg = <0xb126000 0x1000>; + status = "disabled"; + }; + + frame@b127000 { + frame-number = <5>; + interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>; + reg = <0xb127000 0x1000>; + status = "disabled"; + }; + + frame@b128000 { + frame-number = <6>; + interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>; + reg = <0xb128000 0x1000>; + status = "disabled"; + }; + }; + }; + + thermal-zones { + cpu0-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + thermal-sensors = <&tsens0 9>; + trips { + cpu0_alert: trip-point0 { + temperature = <80000>; + hysteresis = <2000>; + type = "passive"; + }; + cpu0_crit: crit { + temperature = <100000>; + hysteresis = <2000>; + type = "critical"; + }; + }; + cooling-maps { + map0 { + trip = <&cpu0_alert>; + cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; + }; + cpu1-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + thermal-sensors = <&tsens0 10>; + trips { + cpu1_alert: trip-point0 { + temperature = <80000>; + hysteresis = <2000>; + type = "passive"; + }; + cpu1_crit: crit { + temperature = <100000>; + hysteresis = <2000>; + type = "critical"; + }; + }; + cooling-maps { + map0 { + trip = <&cpu1_alert>; + cooling-device = <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; + }; + cpu2-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + thermal-sensors = <&tsens0 11>; + trips { + cpu2_alert: trip-point0 { + temperature = <80000>; + hysteresis = <2000>; + type = "passive"; + }; + cpu2_crit: crit { + temperature = <100000>; + hysteresis = <2000>; + type = "critical"; + }; + }; + cooling-maps { + map0 { + trip = <&cpu2_alert>; + cooling-device = <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; + }; + cpu3-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + thermal-sensors = <&tsens0 12>; + trips { + cpu3_alert: trip-point0 { + temperature = <80000>; + hysteresis = <2000>; + type = "passive"; + }; + cpu3_crit: crit { + temperature = <100000>; + hysteresis = <2000>; + type = "critical"; + }; + }; + cooling-maps { + map0 { + trip = <&cpu3_alert>; + cooling-device = <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; + }; + cpu4-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + thermal-sensors = <&tsens0 4>; + trips { + cpu4_alert: trip-point0 { + temperature = <80000>; + hysteresis = <2000>; + type = "passive"; + }; + cpu4_crit: crit { + temperature = <100000>; + hysteresis = <2000>; + type = "critical"; + }; + }; + cooling-maps { + map0 { + trip = <&cpu4_alert>; + cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; + }; + cpu5-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + thermal-sensors = <&tsens0 5>; + trips { + cpu5_alert: trip-point0 { + temperature = <80000>; + hysteresis = <2000>; + type = "passive"; + }; + cpu5_crit: crit { + temperature = <100000>; + hysteresis = <2000>; + type = "critical"; + }; + }; + cooling-maps { + map0 { + trip = <&cpu5_alert>; + cooling-device = <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; + }; + cpu6-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + thermal-sensors = <&tsens0 6>; + trips { + cpu6_alert: trip-point0 { + temperature = <80000>; + hysteresis = <2000>; + type = "passive"; + }; + cpu6_crit: crit { + temperature = <100000>; + hysteresis = <2000>; + type = "critical"; + }; + }; + cooling-maps { + map0 { + trip = <&cpu6_alert>; + cooling-device = <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; + }; + cpu7-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + thermal-sensors = <&tsens0 7>; + trips { + cpu7_alert: trip-point0 { + temperature = <80000>; + hysteresis = <2000>; + type = "passive"; + }; + cpu7_crit: crit { + temperature = <100000>; + hysteresis = <2000>; + type = "critical"; + }; + }; + cooling-maps { + map0 { + trip = <&cpu7_alert>; + cooling-device = <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; + }; + }; + + timer { + compatible = "arm,armv8-timer"; + interrupts = <GIC_PPI 2 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 3 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 4 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 1 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>; + }; +}; diff --git a/arch/arm64/boot/dts/qcom/msm8992-lg-bullhead-rev-10.dts b/arch/arm64/boot/dts/qcom/msm8992-lg-bullhead-rev-10.dts new file mode 100644 index 000000000000..7e6bce4af441 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/msm8992-lg-bullhead-rev-10.dts @@ -0,0 +1,14 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* Copyright (c) Jean Thomas <virgule@jeanthomas.me> + */ + +/dts-v1/; + +#include "msm8992-lg-bullhead.dtsi" + +/ { + model = "LG Nexus 5X rev 1.0"; + + /* required for bootloader to select correct board */ + qcom,board-id = <0xa64 0>; +}; diff --git a/arch/arm64/boot/dts/qcom/msm8992-lg-bullhead-rev-101.dts b/arch/arm64/boot/dts/qcom/msm8992-lg-bullhead-rev-101.dts new file mode 100644 index 000000000000..e6a5ebd30e2f --- /dev/null +++ b/arch/arm64/boot/dts/qcom/msm8992-lg-bullhead-rev-101.dts @@ -0,0 +1,14 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* Copyright (c) Jean Thomas <virgule@jeanthomas.me> + */ + +/dts-v1/; + +#include "msm8992-lg-bullhead.dtsi" + +/ { + model = "LG Nexus 5X rev 1.01"; + + /* required for bootloader to select correct board */ + qcom,board-id = <0xb64 0>; +}; diff --git a/arch/arm64/boot/dts/qcom/msm8992-bullhead-rev-101.dts b/arch/arm64/boot/dts/qcom/msm8992-lg-bullhead.dtsi index 4da6c44bf532..3b0cc85d6674 100644 --- a/arch/arm64/boot/dts/qcom/msm8992-bullhead-rev-101.dts +++ b/arch/arm64/boot/dts/qcom/msm8992-lg-bullhead.dtsi @@ -18,9 +18,7 @@ compatible = "lg,bullhead", "qcom,msm8992"; chassis-type = "handset"; - /* required for bootloader to select correct board */ qcom,msm-id = <251 0>, <252 0>; - qcom,board-id = <0xb64 0>; qcom,pmic-id = <0x10009 0x1000A 0x0 0x0>; /* Bullhead firmware doesn't support PSCI */ diff --git a/arch/arm64/boot/dts/qcom/msm8994-angler-rev-101.dts b/arch/arm64/boot/dts/qcom/msm8994-huawei-angler-rev-101.dts index 0e3dd48f0dbf..0e3dd48f0dbf 100644 --- a/arch/arm64/boot/dts/qcom/msm8994-angler-rev-101.dts +++ b/arch/arm64/boot/dts/qcom/msm8994-huawei-angler-rev-101.dts diff --git a/arch/arm64/boot/dts/qcom/msm8994.dtsi b/arch/arm64/boot/dts/qcom/msm8994.dtsi index 5a9a5ed0565f..8c1dc5155b71 100644 --- a/arch/arm64/boot/dts/qcom/msm8994.dtsi +++ b/arch/arm64/boot/dts/qcom/msm8994.dtsi @@ -444,7 +444,7 @@ }; sdhc1: sdhci@f9824900 { - compatible = "qcom,sdhci-msm-v4"; + compatible = "qcom,msm8994-sdhci", "qcom,sdhci-msm-v4"; reg = <0xf9824900 0x1a0>, <0xf9824000 0x800>; reg-names = "hc_mem", "core_mem"; @@ -467,7 +467,7 @@ }; sdhc2: sdhci@f98a4900 { - compatible = "qcom,sdhci-msm-v4"; + compatible = "qcom,msm8994-sdhci", "qcom,sdhci-msm-v4"; reg = <0xf98a4900 0x11c>, <0xf98a4000 0x800>; reg-names = "hc_mem", "core_mem"; @@ -713,6 +713,9 @@ #reset-cells = <1>; #power-domain-cells = <1>; reg = <0xfc400000 0x2000>; + + clock-names = "xo", "sleep_clk"; + clocks = <&xo_board>, <&sleep_clk>; }; rpm_msg_ram: sram@fc428000 { diff --git a/arch/arm64/boot/dts/qcom/msm8996-mtp.dts b/arch/arm64/boot/dts/qcom/msm8996-mtp.dts index 7d9fc35bc7a0..6a1699a96c99 100644 --- a/arch/arm64/boot/dts/qcom/msm8996-mtp.dts +++ b/arch/arm64/boot/dts/qcom/msm8996-mtp.dts @@ -9,7 +9,7 @@ / { model = "Qualcomm Technologies, Inc. MSM 8996 MTP"; - compatible = "qcom,msm8996-mtp"; + compatible = "qcom,msm8996-mtp", "qcom,msm8996"; aliases { serial0 = &blsp2_uart2; diff --git a/arch/arm64/boot/dts/qcom/msm8996.dtsi b/arch/arm64/boot/dts/qcom/msm8996.dtsi index 91bc974aeb0a..f0f81c23c16f 100644 --- a/arch/arm64/boot/dts/qcom/msm8996.dtsi +++ b/arch/arm64/boot/dts/qcom/msm8996.dtsi @@ -134,7 +134,7 @@ }; }; - cluster0_opp: opp_table0 { + cluster0_opp: opp-table-cluster0 { compatible = "operating-points-v2-kryo-cpu"; nvmem-cells = <&speedbin_efuse>; opp-shared; @@ -222,7 +222,7 @@ }; }; - cluster1_opp: opp_table1 { + cluster1_opp: opp-table-cluster1 { compatible = "operating-points-v2-kryo-cpu"; nvmem-cells = <&speedbin_efuse>; opp-shared; @@ -679,8 +679,10 @@ #power-domain-cells = <1>; reg = <0x00300000 0x90000>; - clocks = <&rpmcc RPM_SMD_LN_BB_CLK>; - clock-names = "cxo2"; + clocks = <&rpmcc RPM_SMD_BB_CLK1>, + <&rpmcc RPM_SMD_LN_BB_CLK>, + <&sleep_clk>; + clock-names = "cxo", "cxo2", "sleep_clk"; }; tsens0: thermal-sensor@4a9000 { @@ -713,7 +715,7 @@ clock-names = "bam_clk"; #dma-cells = <1>; qcom,ee = <0>; - qcom,controlled-remotely = <1>; + qcom,controlled-remotely; }; crypto: crypto@67a000 { @@ -887,7 +889,7 @@ #clock-cells = <1>; #phy-cells = <0>; - clocks = <&mmcc MDSS_AHB_CLK>, <&xo_board>; + clocks = <&mmcc MDSS_AHB_CLK>, <&rpmcc RPM_SMD_BB_CLK1>; clock-names = "iface", "ref"; status = "disabled"; }; @@ -1546,7 +1548,7 @@ reg = <0x00290000 0x10000>; }; - spmi_bus: qcom,spmi@400f000 { + spmi_bus: spmi@400f000 { compatible = "qcom,spmi-pmic-arb"; reg = <0x0400f000 0x1000>, <0x04400000 0x800000>, @@ -2593,7 +2595,7 @@ reg = <0x06400000 0x90000>; clock-names = "xo"; - clocks = <&xo_board>; + clocks = <&rpmcc RPM_SMD_BB_CLK1>; #clock-cells = <1>; }; @@ -2693,7 +2695,7 @@ }; sdhc1: sdhci@7464900 { - compatible = "qcom,sdhci-msm-v4"; + compatible = "qcom,msm8996-sdhci", "qcom,sdhci-msm-v4"; reg = <0x07464900 0x11c>, <0x07464000 0x800>; reg-names = "hc_mem", "core_mem"; @@ -2704,7 +2706,7 @@ clock-names = "iface", "core", "xo"; clocks = <&gcc GCC_SDCC1_AHB_CLK>, <&gcc GCC_SDCC1_APPS_CLK>, - <&xo_board>; + <&rpmcc RPM_SMD_BB_CLK1>; pinctrl-names = "default", "sleep"; pinctrl-0 = <&sdc1_state_on>; @@ -2716,7 +2718,7 @@ }; sdhc2: sdhci@74a4900 { - compatible = "qcom,sdhci-msm-v4"; + compatible = "qcom,msm8996-sdhci", "qcom,sdhci-msm-v4"; reg = <0x074a4900 0x314>, <0x074a4000 0x800>; reg-names = "hc_mem", "core_mem"; @@ -2727,7 +2729,7 @@ clock-names = "iface", "core", "xo"; clocks = <&gcc GCC_SDCC2_AHB_CLK>, <&gcc GCC_SDCC2_APPS_CLK>, - <&xo_board>; + <&rpmcc RPM_SMD_BB_CLK1>; pinctrl-names = "default", "sleep"; pinctrl-0 = <&sdc2_state_on>; @@ -3028,7 +3030,7 @@ interrupt-names = "wdog", "fatal", "ready", "handover", "stop-ack"; - clocks = <&xo_board>; + clocks = <&rpmcc RPM_SMD_BB_CLK1>; clock-names = "xo"; memory-region = <&adsp_region>; @@ -3054,7 +3056,7 @@ power-domains = <&gcc HLOS1_VOTE_LPASS_ADSP_GDSC>; compatible = "qcom,apr-v2"; qcom,smd-channels = "apr_audio_svc"; - qcom,apr-domain = <APR_DOMAIN_ADSP>; + qcom,domain = <APR_DOMAIN_ADSP>; #address-cells = <1>; #size-cells = <0>; @@ -3273,7 +3275,7 @@ }; }; - gpu-thermal-top { + gpu-top-thermal { polling-delay-passive = <250>; polling-delay = <1000>; @@ -3295,7 +3297,7 @@ }; }; - gpu-thermal-bottom { + gpu-bottom-thermal { polling-delay-passive = <250>; polling-delay = <1000>; diff --git a/arch/arm64/boot/dts/qcom/msm8998.dtsi b/arch/arm64/boot/dts/qcom/msm8998.dtsi index f273bc1ff629..2fda21e810c9 100644 --- a/arch/arm64/boot/dts/qcom/msm8998.dtsi +++ b/arch/arm64/boot/dts/qcom/msm8998.dtsi @@ -138,15 +138,9 @@ cpu-idle-states = <&LITTLE_CPU_SLEEP_0 &LITTLE_CPU_SLEEP_1>; next-level-cache = <&L2_0>; L2_0: l2-cache { - compatible = "arm,arch-cache"; + compatible = "cache"; cache-level = <2>; }; - L1_I_0: l1-icache { - compatible = "arm,arch-cache"; - }; - L1_D_0: l1-dcache { - compatible = "arm,arch-cache"; - }; }; CPU1: cpu@1 { @@ -157,12 +151,6 @@ capacity-dmips-mhz = <1024>; cpu-idle-states = <&LITTLE_CPU_SLEEP_0 &LITTLE_CPU_SLEEP_1>; next-level-cache = <&L2_0>; - L1_I_1: l1-icache { - compatible = "arm,arch-cache"; - }; - L1_D_1: l1-dcache { - compatible = "arm,arch-cache"; - }; }; CPU2: cpu@2 { @@ -173,12 +161,6 @@ capacity-dmips-mhz = <1024>; cpu-idle-states = <&LITTLE_CPU_SLEEP_0 &LITTLE_CPU_SLEEP_1>; next-level-cache = <&L2_0>; - L1_I_2: l1-icache { - compatible = "arm,arch-cache"; - }; - L1_D_2: l1-dcache { - compatible = "arm,arch-cache"; - }; }; CPU3: cpu@3 { @@ -189,12 +171,6 @@ capacity-dmips-mhz = <1024>; cpu-idle-states = <&LITTLE_CPU_SLEEP_0 &LITTLE_CPU_SLEEP_1>; next-level-cache = <&L2_0>; - L1_I_3: l1-icache { - compatible = "arm,arch-cache"; - }; - L1_D_3: l1-dcache { - compatible = "arm,arch-cache"; - }; }; CPU4: cpu@100 { @@ -206,15 +182,9 @@ cpu-idle-states = <&BIG_CPU_SLEEP_0 &BIG_CPU_SLEEP_1>; next-level-cache = <&L2_1>; L2_1: l2-cache { - compatible = "arm,arch-cache"; + compatible = "cache"; cache-level = <2>; }; - L1_I_100: l1-icache { - compatible = "arm,arch-cache"; - }; - L1_D_100: l1-dcache { - compatible = "arm,arch-cache"; - }; }; CPU5: cpu@101 { @@ -225,12 +195,6 @@ capacity-dmips-mhz = <1536>; cpu-idle-states = <&BIG_CPU_SLEEP_0 &BIG_CPU_SLEEP_1>; next-level-cache = <&L2_1>; - L1_I_101: l1-icache { - compatible = "arm,arch-cache"; - }; - L1_D_101: l1-dcache { - compatible = "arm,arch-cache"; - }; }; CPU6: cpu@102 { @@ -241,12 +205,6 @@ capacity-dmips-mhz = <1536>; cpu-idle-states = <&BIG_CPU_SLEEP_0 &BIG_CPU_SLEEP_1>; next-level-cache = <&L2_1>; - L1_I_102: l1-icache { - compatible = "arm,arch-cache"; - }; - L1_D_102: l1-dcache { - compatible = "arm,arch-cache"; - }; }; CPU7: cpu@103 { @@ -257,12 +215,6 @@ capacity-dmips-mhz = <1536>; cpu-idle-states = <&BIG_CPU_SLEEP_0 &BIG_CPU_SLEEP_1>; next-level-cache = <&L2_1>; - L1_I_103: l1-icache { - compatible = "arm,arch-cache"; - }; - L1_D_103: l1-dcache { - compatible = "arm,arch-cache"; - }; }; cpu-map { @@ -674,7 +626,7 @@ }; }; - gpu-thermal-bottom { + gpu-bottom-thermal { polling-delay-passive = <250>; polling-delay = <1000>; @@ -689,7 +641,7 @@ }; }; - gpu-thermal-top { + gpu-top-thermal { polling-delay-passive = <250>; polling-delay = <1000>; diff --git a/arch/arm64/boot/dts/qcom/pm6150l.dtsi b/arch/arm64/boot/dts/qcom/pm6150l.dtsi index 3ca2860bb0cf..7aa2ef90cb6a 100644 --- a/arch/arm64/boot/dts/qcom/pm6150l.dtsi +++ b/arch/arm64/boot/dts/qcom/pm6150l.dtsi @@ -52,5 +52,15 @@ reg = <0x5 SPMI_USID>; #address-cells = <1>; #size-cells = <0>; + + pm6150l_wled: leds@d800 { + compatible = "qcom,pm6150l-wled"; + reg = <0xd800>, <0xd900>; + interrupts = <0x5 0xd8 0x1 IRQ_TYPE_EDGE_RISING>; + interrupt-names = "ovp"; + label = "backlight"; + + status = "disabled"; + }; }; }; diff --git a/arch/arm64/boot/dts/qcom/pm8953.dtsi b/arch/arm64/boot/dts/qcom/pm8953.dtsi new file mode 100644 index 000000000000..741c538a9cee --- /dev/null +++ b/arch/arm64/boot/dts/qcom/pm8953.dtsi @@ -0,0 +1,90 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* Copyright (c) 2022, The Linux Foundation. All rights reserved. */ + +#include <dt-bindings/iio/qcom,spmi-vadc.h> +#include <dt-bindings/interrupt-controller/irq.h> +#include <dt-bindings/input/linux-event-codes.h> +#include <dt-bindings/spmi/spmi.h> + +&spmi_bus { + pmic@0 { + compatible = "qcom,pm8953", "qcom,spmi-pmic"; + reg = <0 SPMI_USID>; + #address-cells = <1>; + #size-cells = <0>; + + pm8953_pon: pon@800 { + compatible = "qcom,pm8916-pon"; + reg = <0x800>; + mode-bootloader = <0x2>; + mode-recovery = <0x1>; + + pwrkey { + compatible = "qcom,pm8941-pwrkey"; + interrupts = <0x00 0x08 0 IRQ_TYPE_EDGE_BOTH>; + debounce = <15625>; + bias-pull-up; + linux,code = <KEY_POWER>; + }; + + pm8953_resin: resin { + compatible = "qcom,pm8941-resin"; + interrupts = <0x00 0x08 1 IRQ_TYPE_EDGE_BOTH>; + debounce = <15625>; + bias-pull-up; + status = "disabled"; + }; + }; + + temp-alarm@2400 { + compatible = "qcom,spmi-temp-alarm"; + reg = <0x2400>; + interrupts = <0x0 0x24 0x0 IRQ_TYPE_EDGE_RISING>; + io-channels = <&pm8953_vadc VADC_DIE_TEMP>; + io-channel-names = "thermal"; + #thermal-sensor-cells = <0>; + }; + + pm8953_vadc: vadc@3100 { + compatible = "qcom,spmi-vadc"; + reg = <0x3100>; + interrupts = <0x00 0x31 0x00 0x01>; + #address-cells = <1>; + #size-cells = <0>; + #io-channel-cells = <1>; + + adc-chan@8 { + reg = <VADC_DIE_TEMP>; + }; + adc-chan@9 { + reg = <VADC_REF_625MV>; + }; + adc-chan@a { + reg = <VADC_REF_1250MV>; + }; + adc-chan@c { + reg = <VADC_SPARE1>; + }; + adc-chan@e { + reg = <VADC_GND_REF>; + }; + adc-chan@f { + reg = <VADC_VDD_VADC>; + }; + }; + + rtc@6000 { + compatible = "qcom,pm8941-rtc"; + reg = <0x6000>, <0x6100>; + reg-names = "rtc", "alarm"; + interrupts = <0x0 0x61 0x1 IRQ_TYPE_EDGE_RISING>; + }; + }; + + pmic@1 { + compatible = "qcom,pm8953", "qcom,spmi-pmic"; + reg = <1 SPMI_USID>; + #address-cells = <1>; + #size-cells = <0>; + }; +}; diff --git a/arch/arm64/boot/dts/qcom/pms405.dtsi b/arch/arm64/boot/dts/qcom/pms405.dtsi index 172be177fc8f..98d173a377d5 100644 --- a/arch/arm64/boot/dts/qcom/pms405.dtsi +++ b/arch/arm64/boot/dts/qcom/pms405.dtsi @@ -32,7 +32,7 @@ &spmi_bus { pms405_0: pms405@0 { - compatible = "qcom,spmi-pmic"; + compatible = "qcom,pms405", "qcom,spmi-pmic"; reg = <0x0 SPMI_USID>; #address-cells = <1>; #size-cells = <0>; @@ -139,7 +139,7 @@ }; pms405_1: pms405@1 { - compatible = "qcom,spmi-pmic"; + compatible = "qcom,pms405", "qcom,spmi-pmic"; reg = <0x1 SPMI_USID>; pms405_spmi_regulators: regulators { diff --git a/arch/arm64/boot/dts/qcom/qcs404.dtsi b/arch/arm64/boot/dts/qcom/qcs404.dtsi index 6db753b49326..3f06f7cd3cf2 100644 --- a/arch/arm64/boot/dts/qcom/qcs404.dtsi +++ b/arch/arm64/boot/dts/qcom/qcs404.dtsi @@ -110,7 +110,7 @@ }; }; - cpu_opp_table: cpu-opp-table { + cpu_opp_table: opp-table-cpu { compatible = "operating-points-v2-kryo-cpu"; opp-shared; @@ -128,7 +128,7 @@ }; }; - cpr_opp_table: cpr-opp-table { + cpr_opp_table: opp-table-cpr { compatible = "operating-points-v2-qcom-level"; cpr_opp1: opp1 { diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-coachz.dtsi b/arch/arm64/boot/dts/qcom/sc7180-trogdor-coachz.dtsi index 14ed09f30a73..c81805ef2250 100644 --- a/arch/arm64/boot/dts/qcom/sc7180-trogdor-coachz.dtsi +++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-coachz.dtsi @@ -142,6 +142,22 @@ ap_ts_pen_1v8: &i2c4 { }; }; +&pp1800_uf_cam { + status = "okay"; +}; + +&pp1800_wf_cam { + status = "okay"; +}; + +&pp2800_uf_cam { + status = "okay"; +}; + +&pp2800_wf_cam { + status = "okay"; +}; + &pp3300_dx_edp { gpio = <&tlmm 67 GPIO_ACTIVE_HIGH>; }; diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-homestar.dtsi b/arch/arm64/boot/dts/qcom/sc7180-trogdor-homestar.dtsi index f32369af1351..bff2b556cc75 100644 --- a/arch/arm64/boot/dts/qcom/sc7180-trogdor-homestar.dtsi +++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-homestar.dtsi @@ -146,6 +146,22 @@ ap_ts_pen_1v8: &i2c4 { }; }; +&pp1800_uf_cam { + status = "okay"; +}; + +&pp1800_wf_cam { + status = "okay"; +}; + +&pp2800_uf_cam { + status = "okay"; +}; + +&pp2800_wf_cam { + status = "okay"; +}; + &pp3300_dx_edp { gpio = <&tlmm 67 GPIO_ACTIVE_HIGH>; }; diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor.dtsi b/arch/arm64/boot/dts/qcom/sc7180-trogdor.dtsi index bd5909ffb3dc..732e1181af48 100644 --- a/arch/arm64/boot/dts/qcom/sc7180-trogdor.dtsi +++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor.dtsi @@ -144,6 +144,100 @@ vin-supply = <&ppvar_sys>; }; + pp1800_ec: + pp1800_sensors: + pp1800_ldo: pp1800-ldo-regulator { + compatible = "regulator-fixed"; + regulator-name = "pp1800_ldo"; + + /* EC turns on with hibernate_l; always on for AP */ + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + + /* + * Actually should be pp1800_h1 but we don't have any need to + * model that so we use the parent of pp1800_h1. + */ + vin-supply = <&pp3300_a>; + }; + + pp1800_uf_cam: pp1800-uf-cam-regulator { + compatible = "regulator-fixed"; + regulator-name = "pp1800_uf_cam"; + status = "disabled"; + + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + + gpio = <&tlmm 6 GPIO_ACTIVE_HIGH>; + enable-active-high; + pinctrl-names = "default"; + pinctrl-0 = <&uf_cam_en>; + + vin-supply = <&pp1800_ldo>; + regulator-enable-ramp-delay = <1000>; + }; + + pp1800_wf_cam: pp1800-wf-cam-regulator { + compatible = "regulator-fixed"; + regulator-name = "pp1800_wf_cam"; + status = "disabled"; + + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + + gpio = <&tlmm 7 GPIO_ACTIVE_HIGH>; + enable-active-high; + pinctrl-names = "default"; + pinctrl-0 = <&wf_cam_en>; + + vin-supply = <&pp1800_ldo>; + regulator-enable-ramp-delay = <1000>; + }; + + pp2800_uf_cam: pp2800-uf-cam-regulator { + compatible = "regulator-fixed"; + regulator-name = "pp2800_uf_cam"; + status = "disabled"; + + regulator-min-microvolt = <2850000>; + regulator-max-microvolt = <2850000>; + + gpio = <&tlmm 6 GPIO_ACTIVE_HIGH>; + enable-active-high; + /* + * The pinconf can only be referenced once so we put it on the + * first regulator and comment it out here. + * pinctrl-names = "default"; + * pinctrl-0 = <&uf_cam_en>; + */ + + vin-supply = <&pp3300_a>; + }; + + pp2800_vcm_wf_cam: + pp2800_wf_cam: pp2800-wf-cam-regulator { + compatible = "regulator-fixed"; + regulator-name = "pp2800_wf_cam"; + status = "disabled"; + + regulator-min-microvolt = <2850000>; + regulator-max-microvolt = <2850000>; + + gpio = <&tlmm 7 GPIO_ACTIVE_HIGH>; + enable-active-high; + /* + * The pinconf can only be referenced once so we put it on the + * first regulator and comment it out here. + * pinctrl-names = "default"; + * pinctrl-0 = <&wf_cam_en>; + */ + + vin-supply = <&pp3300_a>; + }; + pp3300_audio: pp3300_codec: pp3300-codec-regulator { compatible = "regulator-fixed"; @@ -190,7 +284,7 @@ vin-supply = <&pp3300_a>; }; - pp3300_hub: pp3300-hub { + pp3300_hub: pp3300-hub-regulator { compatible = "regulator-fixed"; regulator-name = "pp3300_hub"; @@ -543,7 +637,7 @@ pinctrl-0 = <&ap_ec_int_l>; spi-max-frequency = <3000000>; - cros_ec_pwm: ec-pwm { + cros_ec_pwm: pwm { compatible = "google,cros-ec-pwm"; #pwm-cells = <1>; }; @@ -1521,4 +1615,32 @@ ap_spi_fp: &spi10 { drive-strength = <2>; }; }; + + uf_cam_en: uf-cam-en { + pinmux { + pins = "gpio6"; + function = "gpio"; + }; + + pinconf { + pins = "gpio6"; + drive-strength = <2>; + /* External pull down */ + bias-disable; + }; + }; + + wf_cam_en: wf-cam-en { + pinmux { + pins = "gpio7"; + function = "gpio"; + }; + + pinconf { + pins = "gpio7"; + drive-strength = <2>; + /* External pull down */ + bias-disable; + }; + }; }; diff --git a/arch/arm64/boot/dts/qcom/sc7180.dtsi b/arch/arm64/boot/dts/qcom/sc7180.dtsi index 2151cd8c8c7a..e1c46b80f14a 100644 --- a/arch/arm64/boot/dts/qcom/sc7180.dtsi +++ b/arch/arm64/boot/dts/qcom/sc7180.dtsi @@ -1459,6 +1459,8 @@ "imem", "config"; + qcom,qmp = <&aoss_qmp>; + qcom,smem-states = <&ipa_smp2p_out 0>, <&ipa_smp2p_out 1>; qcom,smem-state-names = "ipa-clock-enabled-valid", diff --git a/arch/arm64/boot/dts/qcom/sc7280-chrome-common.dtsi b/arch/arm64/boot/dts/qcom/sc7280-chrome-common.dtsi new file mode 100644 index 000000000000..9f4a9c263c35 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/sc7280-chrome-common.dtsi @@ -0,0 +1,97 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * sc7280 fragment for devices with Chrome bootloader + * + * This file mainly tries to abstract out the memory protections put into + * place by the Chrome bootloader which are different than what's put into + * place by Qualcomm's typical bootloader. It also has a smattering of other + * things that will hold true for any conceivable Chrome design + * + * Copyright 2022 Google LLC. + */ + +/* + * Reserved memory changes + * + * Delete all unused memory nodes and define the peripheral memory regions + * required by the setup for Chrome boards. + */ + +/delete-node/ &hyp_mem; +/delete-node/ &xbl_mem; +/delete-node/ &reserved_xbl_uefi_log; +/delete-node/ &sec_apps_mem; + +/ { + reserved-memory { + adsp_mem: memory@86700000 { + reg = <0x0 0x86700000 0x0 0x2800000>; + no-map; + }; + + camera_mem: memory@8ad00000 { + reg = <0x0 0x8ad00000 0x0 0x500000>; + no-map; + }; + + venus_mem: memory@8b200000 { + reg = <0x0 0x8b200000 0x0 0x500000>; + no-map; + }; + + mpss_mem: memory@8b800000 { + reg = <0x0 0x8b800000 0x0 0xf600000>; + no-map; + }; + + wpss_mem: memory@9ae00000 { + reg = <0x0 0x9ae00000 0x0 0x1900000>; + no-map; + }; + + mba_mem: memory@9c700000 { + reg = <0x0 0x9c700000 0x0 0x200000>; + no-map; + }; + }; +}; + +/* The PMIC PON code isn't compatible w/ how Chrome EC/BIOS handle things. */ +&pmk8350_pon { + status = "disabled"; +}; + +/* + * Chrome designs always boot from SPI flash hooked up to the qspi. + * + * It's expected that all boards will support "dual SPI" at 37.5 MHz. + * If some boards need a different speed or have a package that allows + * Quad SPI together with WP then those boards can easily override. + */ +&qspi { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&qspi_clk>, <&qspi_cs0>, <&qspi_data01>; + + spi_flash: flash@0 { + compatible = "jedec,spi-nor"; + reg = <0>; + + spi-max-frequency = <37500000>; + spi-tx-bus-width = <2>; + spi-rx-bus-width = <2>; + }; +}; + +/* Modem setup is different on Chrome setups than typical Qualcomm setup */ +&remoteproc_mpss { + status = "okay"; + compatible = "qcom,sc7280-mss-pil"; + iommus = <&apps_smmu 0x124 0x0>, <&apps_smmu 0x488 0x7>; + memory-region = <&mba_mem>, <&mpss_mem>; +}; + +/* Increase the size from 2.5MB to 8MB */ +&rmtfs_mem { + reg = <0x0 0x9c900000 0x0 0x800000>; +}; diff --git a/arch/arm64/boot/dts/qcom/sc7280-crd.dts b/arch/arm64/boot/dts/qcom/sc7280-crd.dts index cd2755ce530d..e2efbdde53a3 100644 --- a/arch/arm64/boot/dts/qcom/sc7280-crd.dts +++ b/arch/arm64/boot/dts/qcom/sc7280-crd.dts @@ -23,6 +23,18 @@ }; }; +&apps_rsc { + pmg1110-regulators { + compatible = "qcom,pmg1110-rpmh-regulators"; + qcom,pmic-id = "k"; + + vreg_s1k_1p0: smps1 { + regulator-min-microvolt = <1010000>; + regulator-max-microvolt = <1170000>; + }; + }; +}; + ap_tp_i2c: &i2c0 { status = "okay"; clock-frequency = <400000>; diff --git a/arch/arm64/boot/dts/qcom/sc7280-herobrine-herobrine-r0.dts b/arch/arm64/boot/dts/qcom/sc7280-herobrine-herobrine-r0.dts new file mode 100644 index 000000000000..1779d96c30f6 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/sc7280-herobrine-herobrine-r0.dts @@ -0,0 +1,1352 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Google Herobrine board device tree source + * + * Copyright 2021 Google LLC. + */ + +/dts-v1/; + +#include <dt-bindings/iio/qcom,spmi-adc7-pmk8350.h> +#include <dt-bindings/iio/qcom,spmi-adc7-pmr735a.h> +#include <dt-bindings/input/gpio-keys.h> +#include <dt-bindings/input/input.h> +#include <dt-bindings/pinctrl/qcom,pmic-gpio.h> +#include <dt-bindings/regulator/qcom,rpmh-regulator.h> + +#include "sc7280.dtsi" + +/* PMICs depend on spmi_bus label and so must come after SoC */ +#include "pm7325.dtsi" +#include "pm8350c.dtsi" +#include "pmk8350.dtsi" + +#include "sc7280-chrome-common.dtsi" + +/ { + model = "Google Herobrine (rev0)"; + compatible = "google,herobrine-rev0", "qcom,sc7280"; +}; + +/ { + aliases { + serial0 = &uart5; + serial1 = &uart7; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + /* FIXED REGULATORS - parents above children */ + + /* This is the top level supply and variable voltage */ + ppvar_sys: ppvar-sys-regulator { + compatible = "regulator-fixed"; + regulator-name = "ppvar_sys"; + regulator-always-on; + regulator-boot-on; + }; + + /* This divides ppvar_sys by 2, so voltage is variable */ + src_vph_pwr: src-vph-pwr-regulator { + compatible = "regulator-fixed"; + regulator-name = "src_vph_pwr"; + + /* EC turns on with switchcap_on; always on for AP */ + regulator-always-on; + regulator-boot-on; + + vin-supply = <&ppvar_sys>; + }; + + pp5000_s3: pp5000-s3-regulator { + compatible = "regulator-fixed"; + regulator-name = "pp5000_s3"; + + /* EC turns on with en_pp5000_s3; always on for AP */ + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + + vin-supply = <&ppvar_sys>; + }; + + pp3300_z1: pp3300-z1-regulator { + compatible = "regulator-fixed"; + regulator-name = "pp3300_z1"; + + /* EC turns on with en_pp3300_z1; always on for AP */ + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + + vin-supply = <&ppvar_sys>; + }; + + pp3300_audio: + pp3300_codec: pp3300-codec-regulator { + compatible = "regulator-fixed"; + regulator-name = "pp3300_codec"; + + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + + gpio = <&tlmm 67 GPIO_ACTIVE_HIGH>; + enable-active-high; + pinctrl-names = "default"; + pinctrl-0 = <&en_pp3300_codec>; + + vin-supply = <&pp3300_z1>; + }; + + pp3300_cam: + pp3300_edp: + pp3300_ts: pp3300-edp-regulator { + compatible = "regulator-fixed"; + regulator-name = "pp3300_edp"; + + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + + gpio = <&tlmm 80 GPIO_ACTIVE_HIGH>; + enable-active-high; + pinctrl-names = "default"; + pinctrl-0 = <&en_pp3300_dx_edp>; + + vin-supply = <&pp3300_z1>; + }; + + pp3300_fp: + pp3300_fp_ls: + pp3300_mcu: pp3300-fp-regulator { + compatible = "regulator-fixed"; + regulator-name = "pp3300_fp"; + + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + + regulator-boot-on; + regulator-always-on; + + /* + * WARNING: it is intentional that GPIO 42 isn't listed here. + * The userspace script for updating the fingerprint firmware + * needs to control the FP regulators during a FW update, + * hence the signal can't be owned by the kernel regulator. + */ + + pinctrl-names = "default"; + pinctrl-0 = <&en_fp_rails>; + + vin-supply = <&pp3300_z1>; + }; + + pp3300_hub: pp3300-hub-regulator { + compatible = "regulator-fixed"; + regulator-name = "pp3300_hub"; + + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + + regulator-boot-on; + regulator-always-on; + + gpio = <&tlmm 24 GPIO_ACTIVE_HIGH>; + enable-active-high; + pinctrl-names = "default"; + pinctrl-0 = <&en_pp3300_hub>; + + vin-supply = <&pp3300_z1>; + }; + + pp3300_tp: pp3300-tp-regulator { + compatible = "regulator-fixed"; + regulator-name = "pp3300_tp"; + + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + + /* AP turns on with PP1800_L18B_S0; always on for AP */ + regulator-always-on; + regulator-boot-on; + + vin-supply = <&pp3300_z1>; + }; + + pp2850_uf_cam: pp2850-uf-cam-regulator { + compatible = "regulator-fixed"; + regulator-name = "pp2850_uf_cam"; + + regulator-min-microvolt = <2850000>; + regulator-max-microvolt = <2850000>; + + gpio = <&tlmm 6 GPIO_ACTIVE_HIGH>; + enable-active-high; + pinctrl-names = "default"; + pinctrl-0 = <&uf_cam_en>; + + vin-supply = <&pp3300_cam>; + }; + + pp2850_vcm_wf_cam: pp2850-vcm-wf-cam-regulator { + compatible = "regulator-fixed"; + regulator-name = "pp2850_vcm_wf_cam"; + + regulator-min-microvolt = <2850000>; + regulator-max-microvolt = <2850000>; + + gpio = <&tlmm 7 GPIO_ACTIVE_HIGH>; + enable-active-high; + pinctrl-names = "default"; + pinctrl-0 = <&wf_cam_en>; + + vin-supply = <&pp3300_cam>; + }; + + pp2850_wf_cam: pp2850-wf-cam-regulator { + compatible = "regulator-fixed"; + regulator-name = "pp2850_wf_cam"; + + regulator-min-microvolt = <2850000>; + regulator-max-microvolt = <2850000>; + + gpio = <&tlmm 7 GPIO_ACTIVE_HIGH>; + enable-active-high; + /* + * The pinconf can only be referenced once so we put it on the + * first regulator and comment it out here. + * + * pinctrl-names = "default"; + * pinctrl-0 = <&wf_cam_en>; + */ + + vin-supply = <&pp3300_cam>; + }; + + pp1800_fp: pp1800-fp-regulator { + compatible = "regulator-fixed"; + regulator-name = "pp1800_fp"; + + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + + regulator-boot-on; + regulator-always-on; + + /* + * WARNING: it is intentional that GPIO 42 isn't listed here. + * The userspace script for updating the fingerprint firmware + * needs to control the FP regulators during a FW update, + * hence the signal can't be owned by the kernel regulator. + */ + + pinctrl-names = "default"; + pinctrl-0 = <&en_fp_rails>; + + vin-supply = <&pp1800_l18b_s0>; + status = "disabled"; + }; + + pp1800_uf_cam: pp1800-uf-cam-regulator { + compatible = "regulator-fixed"; + regulator-name = "pp1800_uf_cam"; + + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + + gpio = <&tlmm 6 GPIO_ACTIVE_HIGH>; + enable-active-high; + /* + * The pinconf can only be referenced once so we put it on the + * first regulator and comment it out here. + * + * pinctrl-names = "default"; + * pinctrl-0 = <&uf_cam_en>; + */ + + vin-supply = <&pp1800_l19b>; + }; + + pp1800_wf_cam: pp1800-wf-cam-regulator { + compatible = "regulator-fixed"; + regulator-name = "pp1800_wf_cam"; + + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + + gpio = <&tlmm 7 GPIO_ACTIVE_HIGH>; + enable-active-high; + /* + * The pinconf can only be referenced once so we put it on the + * first regulator and comment it out here. + * + * pinctrl-names = "default"; + * pinctrl-0 = <&wf_cam_en>; + */ + + vin-supply = <&pp1800_l19b>; + }; + + pp1200_wf_cam: pp1200-wf-cam-regulator { + compatible = "regulator-fixed"; + regulator-name = "pp1200_wf_cam"; + + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + + gpio = <&tlmm 7 GPIO_ACTIVE_HIGH>; + enable-active-high; + /* + * The pinconf can only be referenced once so we put it on the + * first regulator and comment it out here. + * + * pinctrl-names = "default"; + * pinctrl-0 = <&wf_cam_en>; + */ + + vin-supply = <&pp1200_l6b>; + }; + + /* BOARD-SPECIFIC TOP LEVEL NODES */ + + gpio_keys: gpio-keys { + compatible = "gpio-keys"; + status = "disabled"; + pinctrl-names = "default"; + pinctrl-0 = <&pen_pdct_l>; + + pen_insert: pen-insert { + label = "Pen Insert"; + + /* Insert = low, eject = high */ + gpios = <&tlmm 39 GPIO_ACTIVE_LOW>; + linux,code = <SW_PEN_INSERTED>; + linux,input-type = <EV_SW>; + wakeup-event-action = <EV_ACT_DEASSERTED>; + wakeup-source; + }; + }; + + pwmleds { + compatible = "pwm-leds"; + status = "disabled"; + keyboard_backlight: keyboard-backlight { + status = "disabled"; + label = "cros_ec::kbd_backlight"; + pwms = <&cros_ec_pwm 0>; + max-brightness = <1023>; + }; + }; +}; + +&apps_rsc { + pm7325-regulators { + compatible = "qcom,pm7325-rpmh-regulators"; + qcom,pmic-id = "b"; + + vdd19_pmu_pcie_i: + vdd19_pmu_rfa_i: + vreg_s1b_wlan: + vreg_s1b: smps1 { + regulator-min-microvolt = <1856000>; + regulator-max-microvolt = <2040000>; + }; + + vdd_pmu_aon_i: + vreg_s7b_wlan: + vreg_s7b: smps7 { + regulator-min-microvolt = <535000>; + regulator-max-microvolt = <1120000>; + }; + + vdd13_pmu_pcie_i: + vdd13_pmu_rfa_i: + vreg_s8b_wlan: + vreg_s8b: smps8 { + regulator-min-microvolt = <1256000>; + regulator-max-microvolt = <1500000>; + }; + + vdda_usb_ss_dp_core: + vreg_l1b: ldo1 { + regulator-min-microvolt = <825000>; + regulator-max-microvolt = <925000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vdda_usb_hs0_3p1: + vreg_l2b: ldo2 { + regulator-min-microvolt = <2700000>; + regulator-max-microvolt = <3544000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + pp1200_l6b: + vdd_ufs_1p2: + vdd_vref: + vdda_csi01_1p2: + vdda_csi23_1p2: + vdda_csi4_1p2: + vdda_dsi0_1p2: + vdda_pcie0_1p2: + vdda_pcie1_1p2: + vdda_usb_ss_dp_1p2: + vdda_qlink0_1p2_ck: + vdda_qlink1_1p2_ck: + vreg_l6b_1p2: + vreg_l6b: ldo6 { + regulator-min-microvolt = <1120000>; + regulator-max-microvolt = <1408000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + pp2950_l7b: + vreg_l7b: ldo7 { + regulator-min-microvolt = <2960000>; + regulator-max-microvolt = <2960000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + codec_vcc: + pp1800_l18b_s0: + pp1800_ts: + vdd1: + vddpx_0: + vddpx_3: + vddpx_7: + vreg_l18b: ldo18 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2000000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + pp1800_l19b: + vddpx_ts: + vddpx_wl4otp: + vreg_l19b: ldo19 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + }; + + pm8350c-regulators { + compatible = "qcom,pm8350c-rpmh-regulators"; + qcom,pmic-id = "c"; + + vreg_s1c: smps1 { + regulator-min-microvolt = <2190000>; + regulator-max-microvolt = <2210000>; + }; + + vddpx_1: + vreg_s9c: smps9 { + regulator-min-microvolt = <1010000>; + regulator-max-microvolt = <1170000>; + }; + + pp1800_l1c: + pp1800_pen: + vdd_a_gfx_cs_1p1: + vdd_a_cxo_1p8: + vdd_qfprom: + vdda_apc_cs_1p8: + vdda_qrefs_1p8: + vdda_turing_q6_cs_1p8: + vdda_usb_hs0_1p8: + vreg_l1c: ldo1 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1980000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + dmic_vdd: + pp1800_alc5682: + pp1800_l2c: + pp1800_vreg_alc5682: + vreg_l2c: ldo2 { + regulator-min-microvolt = <1620000>; + regulator-max-microvolt = <1980000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + pp3300_sar: + pp3300_sensor: + vreg_l3c: ldo3 { + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <3540000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + ppvar_uim1: + vddpx_5: + vreg_l4c: ldo4 { + regulator-min-microvolt = <1620000>; + regulator-max-microvolt = <3300000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + pp2950_l5c: + uim_vcc: + vddpx_6: + vreg_l5c: ldo5 { + regulator-min-microvolt = <1620000>; + regulator-max-microvolt = <3300000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + ppvar_l6c: + vddpx_2: + vreg_l6c: ldo6 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2950000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l7c: ldo7 { + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3544000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + pp1800_prox: + pp1800_sar: + vreg_l8c: ldo8 { + regulator-min-microvolt = <1620000>; + regulator-max-microvolt = <2000000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + pp2950_l9c: + vreg_l9c: ldo9 { + regulator-min-microvolt = <2960000>; + regulator-max-microvolt = <2960000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vdd_a_gnss_0p9: + vdd_ufs_core: + vdd_usb_hs0_core: + vdd_vref_0p9: + vdda_csi01_0p9: + vdda_csi23_0p9: + vdda_csi4_0p9: + vdda_dsi0_pll_0p9: + vdda_dsi0_0p9: + vdda_pcie0_core: + vdda_pcie1_core: + vdda_qlink0_0p9: + vdda_qlink1_0p9: + vdda_qlink0_0p9_ck: + vdda_qlink1_0p9_ck: + vdda_qrefs_0p875: + vreg_l10c_0p8: + vreg_l10c: ldo10 { + regulator-min-microvolt = <720000>; + regulator-max-microvolt = <1050000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + pp2800_l11c: + vreg_l11c: ldo11 { + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <3544000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + pp1800_l12c: + vreg_l12c: ldo12 { + regulator-min-microvolt = <1650000>; + regulator-max-microvolt = <2000000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + pp3300_l13c: + vreg_l13c: ldo13 { + regulator-min-microvolt = <2700000>; + regulator-max-microvolt = <3544000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_bob: bob { + regulator-min-microvolt = <3008000>; + regulator-max-microvolt = <3960000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_AUTO>; + }; + }; +}; + +ap_tp_i2c: &i2c1 { + status = "okay"; + clock-frequency = <400000>; + + trackpad: trackpad@15 { + compatible = "elan,ekth3000"; + reg = <0x15>; + pinctrl-names = "default"; + pinctrl-0 = <&tp_int_odl>; + + interrupt-parent = <&tlmm>; + interrupts = <102 IRQ_TYPE_EDGE_FALLING>; + + vcc-supply = <&pp3300_z1>; + + wakeup-source; + }; +}; + +ap_h1_i2c: &i2c12 { + status = "okay"; + clock-frequency = <400000>; + + tpm@50 { + compatible = "google,cr50"; + reg = <0x50>; + + pinctrl-names = "default"; + pinctrl-0 = <&h1_ap_int_odl>; + + interrupt-parent = <&tlmm>; + interrupts = <54 IRQ_TYPE_EDGE_RISING>; + }; +}; + +ap_ts_pen: &i2c13 { + status = "okay"; + clock-frequency = <400000>; + + ap_ts: touchscreen@10 { + compatible = "hid-over-i2c"; + reg = <0x10>; + pinctrl-names = "default"; + pinctrl-0 = <&ts_int_l>, <&ts_reset_l>; + + interrupt-parent = <&tlmm>; + interrupts = <81 IRQ_TYPE_LEVEL_LOW>; + + post-power-on-delay-ms = <20>; + hid-descr-addr = <0x0001>; + + vdd-supply = <&pp3300_ts>; + }; +}; + +&pm7325_gpios { + status = "disabled"; /* No GPIOs are connected */ +}; + +&pmk8350_gpios { + status = "disabled"; /* No GPIOs are connected */ +}; + +&pmk8350_rtc { + status = "disabled"; +}; + +&pmk8350_vadc { + pmk8350_die_temp { + reg = <PMK8350_ADC7_DIE_TEMP>; + label = "pmk8350_die_temp"; + qcom,pre-scaling = <1 1>; + }; + + pmr735a_die_temp { + reg = <PMR735A_ADC7_DIE_TEMP>; + label = "pmr735a_die_temp"; + qcom,pre-scaling = <1 1>; + }; +}; + +&qfprom { + vcc-supply = <&vdd_qfprom>; +}; + +&qupv3_id_0 { + status = "okay"; +}; + +&qupv3_id_1 { + status = "okay"; +}; + +&sdhc_1 { + status = "okay"; + + vmmc-supply = <&pp2950_l7b>; + vqmmc-supply = <&pp1800_l19b>; +}; + +&sdhc_2 { + status = "okay"; + + pinctrl-0 = <&sdc2_clk>, <&sdc2_cmd>, <&sdc2_data>, <&sd_cd>; + pinctrl-1 = <&sdc2_clk_sleep>, <&sdc2_cmd_sleep>, <&sdc2_data_sleep>, <&sd_cd>; + vmmc-supply = <&pp2950_l9c>; + vqmmc-supply = <&ppvar_l6c>; + + cd-gpios = <&tlmm 91 GPIO_ACTIVE_LOW>; +}; + +ap_ec_spi: &spi8 { + status = "okay"; + + pinctrl-0 = <&qup_spi8_data_clk>, <&qup_spi8_cs_gpio_init_high>, <&qup_spi8_cs_gpio>; + cs-gpios = <&tlmm 35 GPIO_ACTIVE_LOW>; + + cros_ec: ec@0 { + compatible = "google,cros-ec-spi"; + reg = <0>; + interrupt-parent = <&tlmm>; + interrupts = <142 IRQ_TYPE_LEVEL_LOW>; + pinctrl-names = "default"; + pinctrl-0 = <&ap_ec_int_l>; + spi-max-frequency = <3000000>; + + cros_ec_pwm: pwm { + compatible = "google,cros-ec-pwm"; + #pwm-cells = <1>; + }; + + i2c_tunnel: i2c-tunnel { + compatible = "google,cros-ec-i2c-tunnel"; + google,remote-bus = <0>; + #address-cells = <1>; + #size-cells = <0>; + }; + + typec { + compatible = "google,cros-ec-typec"; + #address-cells = <1>; + #size-cells = <0>; + + usb_c0: connector@0 { + compatible = "usb-c-connector"; + reg = <0>; + label = "left"; + power-role = "dual"; + data-role = "host"; + try-power-role = "source"; + }; + + usb_c1: connector@1 { + compatible = "usb-c-connector"; + reg = <1>; + label = "right"; + power-role = "dual"; + data-role = "host"; + try-power-role = "source"; + }; + }; + }; +}; + +#include <arm/cros-ec-keyboard.dtsi> +#include <arm/cros-ec-sbs.dtsi> + +&keyboard_controller { + function-row-physmap = < + MATRIX_KEY(0x00, 0x02, 0) /* T1 */ + MATRIX_KEY(0x03, 0x02, 0) /* T2 */ + MATRIX_KEY(0x02, 0x02, 0) /* T3 */ + MATRIX_KEY(0x01, 0x02, 0) /* T4 */ + MATRIX_KEY(0x03, 0x04, 0) /* T5 */ + MATRIX_KEY(0x02, 0x04, 0) /* T6 */ + MATRIX_KEY(0x01, 0x04, 0) /* T7 */ + MATRIX_KEY(0x02, 0x09, 0) /* T8 */ + MATRIX_KEY(0x01, 0x09, 0) /* T9 */ + MATRIX_KEY(0x00, 0x04, 0) /* T10 */ + >; + linux,keymap = < + MATRIX_KEY(0x00, 0x02, KEY_BACK) + MATRIX_KEY(0x03, 0x02, KEY_REFRESH) + MATRIX_KEY(0x02, 0x02, KEY_ZOOM) + MATRIX_KEY(0x01, 0x02, KEY_SCALE) + MATRIX_KEY(0x03, 0x04, KEY_SYSRQ) + MATRIX_KEY(0x02, 0x04, KEY_BRIGHTNESSDOWN) + MATRIX_KEY(0x01, 0x04, KEY_BRIGHTNESSUP) + MATRIX_KEY(0x02, 0x09, KEY_MUTE) + MATRIX_KEY(0x01, 0x09, KEY_VOLUMEDOWN) + MATRIX_KEY(0x00, 0x04, KEY_VOLUMEUP) + + CROS_STD_MAIN_KEYMAP + >; +}; + +&uart5 { + compatible = "qcom,geni-debug-uart"; + status = "okay"; +}; + +&uart7 { + status = "okay"; +}; + +&usb_1 { + status = "okay"; +}; + +&usb_1_dwc3 { + dr_mode = "host"; +}; + +&usb_1_hsphy { + status = "okay"; + + vdda-pll-supply = <&vdd_usb_hs0_core>; + vdda33-supply = <&vdda_usb_hs0_3p1>; + vdda18-supply = <&vdda_usb_hs0_1p8>; +}; + +&usb_1_qmpphy { + status = "okay"; + + vdda-phy-supply = <&vdda_usb_ss_dp_1p2>; + vdda-pll-supply = <&vdda_usb_ss_dp_core>; +}; + +&usb_2 { + status = "okay"; +}; + +&usb_2_dwc3 { + dr_mode = "host"; +}; + +&usb_2_hsphy { + status = "okay"; + + vdda-pll-supply = <&vdd_usb_hs0_core>; + vdda33-supply = <&vdda_usb_hs0_3p1>; + vdda18-supply = <&vdda_usb_hs0_1p8>; +}; + +/* PINCTRL - additions to nodes defined in sc7280.dtsi */ + +&dp_hot_plug_det { + bias-disable; +}; + +&pcie1_clkreq_n { + bias-pull-up; + drive-strength = <2>; +}; + +&qspi_cs0 { + bias-disable; +}; + +&qspi_clk { + bias-disable; +}; + +&qspi_data01 { + /* High-Z when no transfers; nice to park the lines */ + bias-pull-up; +}; + +&qup_uart5_rx { + drive-strength = <2>; + bias-pull-up; +}; + +&qup_uart5_tx { + drive-strength = <2>; + bias-disable; +}; + +&qup_uart7_cts { + /* + * Configure a pull-down on CTS to match the pull of + * the Bluetooth module. + */ + bias-pull-down; +}; + +&qup_uart7_rts { + /* We'll drive RTS, so no pull */ + drive-strength = <2>; + bias-disable; +}; + +&qup_uart7_tx { + /* We'll drive TX, so no pull */ + drive-strength = <2>; + bias-disable; +}; + +&qup_uart7_rx { + /* + * Configure a pull-up on RX. This is needed to avoid + * garbage data when the TX pin of the Bluetooth module is + * in tri-state (module powered off or not driving the + * signal yet). + */ + bias-pull-up; +}; + +&sdc1_clk { + bias-disable; + drive-strength = <16>; +}; + +&sdc1_cmd { + bias-pull-up; + drive-strength = <10>; +}; + +&sdc1_data { + bias-pull-up; + drive-strength = <10>; +}; + +&sdc1_rclk { + bias-pull-down; +}; + +&sdc2_clk { + bias-disable; + drive-strength = <16>; +}; + +&sdc2_cmd { + bias-pull-up; + drive-strength = <10>; +}; + +&sdc2_data { + bias-pull-up; + drive-strength = <10>; +}; + +/* PINCTRL - board-specific pinctrl */ + +&pm8350c_gpios { + gpio-line-names = "AP_SUSPEND", + "", + "", + "AP_BL_EN", + "", + "SD_CD_ODL", + "", + "", + "AP_BL_PWM"; + + ap_bl_en: ap-bl-en { + pins = "gpio4"; + function = "normal"; + qcom,drive-strength = <PMIC_GPIO_STRENGTH_LOW>; + bias-disable; + + /* Force backlight to be disabled to match state at boot. */ + output-low; + }; +}; + +&tlmm { + gpio-line-names = "HP_I2C_SDA", /* 0 */ + "HP_I2C_SCL", + "SSD_RST_L", + "PE_WAKE_ODL", + "AP_TP_I2C_SDA", + "AP_TP_I2C_SCL", + "UF_CAM_EN", + "WF_CAM_EN", + "AP_SAR_SENSOR_SDA", + "AP_SAR_SENSOR_SCL", + + "", /* 10 */ + "", + "AP_SPI_MOSI", + "AP_SPI_MISO", + "AP_SPI_CLK", + "AP_SPI_CS0_L", + "", + "", + "EDP_HPD", + "", + + "UF_CAM_RST_L", /* 20 */ + "WF_CAM_RST_L", + "UART_AP_TX_DBG_RX", + "UART_DBG_TX_AP_RX", + "EN_PP3300_HUB", + "", + "HOST2WLAN_SOL", + "WLAN2HOST_SOL", + "BT_UART_CTS", + "BT_UART_RTS", + + "BT_UART_TXD", /* 30 */ + "BT_UART_RXD", + "AP_EC_SPI_MISO", + "AP_EC_SPI_MOSI", + "AP_EC_SPI_CLK", + "AP_EC_SPI_CS_L", + "", + "", + "", + "PEN_PDCT_L", + + "IO_BRD_ID0", /* 40 */ + "IO_BRD_ID1", + "EN_FP_RAILS", + "PEN_IRQ_L", + "AP_SPI_FP_MISO", + "AP_SPI_FP_MOSI", + "AP_SPI_FP_CLK", + "AP_SPI_FP_CS_L", + "AP_H1_SPI_MISO", + "AP_H1_SPI_MOSI", + + "AP_H1_SPI_CLK", /* 50 */ + "AP_H1_SPI_CS_L", + "AP_TS_PEN_I2C_SDA", + "AP_TS_PEN_I2C_SCL", + "H1_AP_INT_ODL", + "", + "LCM_RST_1V8_L", + "AMP_EN", + "", + "DP_HOT_PLUG_DET", + + "HUB_RST_L", /* 60 */ + "FP_TO_AP_IRQ_L", + "", + "", + "UF_CAM_MCLK", + "WF_CAM_MCLK", + "IO_BRD_ID2", + "EN_PP3300_CODEC", + "EC_IN_RW_ODL", + "UF_CAM_SDA", + + "UF_CAM_SCL", /* 70 */ + "WF_CAM_SDA", + "WF_CAM_SCL", + "AP_BRD_ID0", + "AP_BRD_ID1", + "AP_BRD_ID2", + "", + "FPMCU_BOOT0", + "FP_RST_L", + "PE_CLKREQ_ODL", + + "EN_EDP_PP3300", /* 80 */ + "TS_INT_L", + "FORCE_USB_BOOT", + "WCD_RST_L", + "WLAN_EN", + "BT_EN", + "WLAN_SW_CTRL", + "PCIE0_RESET_L", + "PCIE0_CLK_REQ_L", + "PCIE0_WAKE_L", + + "AS_EN", /* 90 */ + "SD_CD_ODL", + "", + /* + * AP_FLASH_WP_L is crossystem ABI. Schematics + * call it BIOS_FLASH_WP_L. + */ + "AP_FLASH_WP_L", + "BT_WLAN_SB_CLK", + "BT_WLAN_SB_DATA", + "HP_MCLK", + "HP_BCLK", + "HP_DOUT", + "HP_DIN", + + "HP_LRCLK", /* 100 */ + "HP_IRQ", + "TP_INT_ODL", + "", + "IO_SKU_ID2", + "TS_RESET_L", + "AMP_BCLK", + "AMP_DIN", + "AMP_LRCLK", + "UIM2_DATA", + + "UIM2_CLK", /* 110 */ + "UIM2_RST", + "UIM2_PRESENT", + "UIM1_DATA", + "UIM1_CLK", + "UIM1_RST", + "", + "RFFE0_CLK", + "RFFE0_DATA/BOOT_CONFIG_0", + "RFFE1_CLK", + + "RFFE1_DATA/BOOT_CONFIG_1", /* 120 */ + "RFFE2_CLK", + "RFFE2_DATA/BOOT_CONFIG_2", + "RFFE3_CLK", + "RFFE3_DATA/BOOT_CONFIG_3", + "RFFE4_CLK", + "RFFE4_DATA", + "WCI2_LTE_COEX_RXD", + "WCI2_LTE_COEX_TXD", + "IO_SKU_ID0", + + "IO_SKU_ID1", /* 130 */ + "", + "", + "QLINK0_REQ", + "QLINK0_EN", + "QLINK0_WMSS_RESET_L", + "QLINK1_REQ", + "QLINK1_EN", + "QLINK1_WMSS_RESET_L", + "FORCED_USB_BOOT_POL", + + "", /* 140 */ + "P_SENSOR_INT_L", + "AP_EC_INT_L", + "", + "WCD_SWR_TX_CLK", + "WCD_SWR_TX_DATA_0", + "WCD_SWR_TX_DATA_1", + "WCD_SWR_RX_CLK", + "WCD_SWR_RX_DATA_0", + "WCD_SWR_RX_DATA_1", + + "", /* 150 */ + "", + "", + "", + "", + "", + "", + "", + "WCD_SWR_TX_DATA_2", + "", + + "", /* 160 */ + "", + "", + "", + "", + "", + "", + "", + "", + "", + + "", /* 170 */ + "SENS_UART_TXD", + "SENS_UART_RXD", + "", + "", + ""; + + /* + * pinctrl settings for pins that have no real owners. + */ + pinctrl-names = "default"; + pinctrl-0 = <&bios_flash_wp_l>; + + amp_en: amp-en { + pins = "gpio57"; + function = "gpio"; + bias-pull-down; + }; + + ap_ec_int_l: ap-ec-int-l { + pins = "gpio142"; + input-enable; + bias-pull-up; + }; + + bios_flash_wp_l: bios-flash-wp-l { + pins = "gpio93"; + function = "gpio"; + input-enable; + bias-disable; + }; + + bt_en: bt-en { + pins = "gpio85"; + function = "gpio"; + drive-strength = <2>; + output-low; + bias-pull-down; + }; + + en_fp_rails: en-fp-rails { + pins = "gpio42"; + drive-strength = <2>; + output-high; + bias-disable; + }; + + en_pp3300_codec: en-pp3300-codec { + pins = "gpio67"; + drive-strength = <2>; + bias-disable; + }; + + en_pp3300_dx_edp: en-pp3300-dx-edp { + pins = "gpio80"; + function = "gpio"; + drive-strength = <2>; + /* Has external pulldown */ + bias-disable; + }; + + en_pp3300_hub: en-pp3300-hub { + pins = "gpio24"; + function = "gpio"; + drive-strength = <2>; + /* Has external pulldown */ + bias-disable; + }; + + fp_to_ap_irq_l: fp-to-ap-irq-l { + pins = "gpio61"; + function = "gpio"; + input-enable; + /* Has external pullup */ + bias-disable; + }; + + h1_ap_int_odl: h1-ap-int-odl { + pins = "gpio54"; + function = "gpio"; + input-enable; + bias-pull-up; + }; + + hp_irq: hp-irq { + pins = "gpio101"; + function = "gpio"; + bias-pull-up; + }; + + p_sensor_int_l: p-sensor-int-l { + pins = "gpio141"; + function = "gpio"; + input-enable; + bias-pull-up; + }; + + pen_irq_l: pen-irq-l { + pins = "gpio43"; + function = "gpio"; + /* Has external pullup */ + bias-disable; + }; + + pen_pdct_l: pen-pdct-l { + pins = "gpio39"; + function = "gpio"; + /* Has external pullup */ + bias-disable; + }; + + qup_spi8_cs_gpio_init_high: qup-spi8-cs-gpio-init-high { + pins = "gpio35"; + output-high; + }; + + qup_spi11_cs_gpio_init_high: qup-spi11-cs-gpio-init-high { + pins = "gpio47"; + output-high; + }; + + qup_spi12_cs_gpio_init_high: qup-spi12-cs-gpio-init-high { + pins = "gpio51"; + output-high; + }; + + qup_uart7_sleep_cts: qup-uart7-sleep-cts { + pins = "gpio28"; + function = "gpio"; + /* + * Configure a pull-down on CTS to match the pull of + * the Bluetooth module. + */ + bias-pull-down; + }; + + qup_uart7_sleep_rts: qup-uart7-sleep-rts { + pins = "gpio29"; + function = "gpio"; + /* + * Configure pull-down on RTS. As RTS is active low + * signal, pull it low to indicate the BT SoC that it + * can wakeup the system anytime from suspend state by + * pulling RX low (by sending wakeup bytes). + */ + bias-pull-down; + }; + + qup_uart7_sleep_rx: qup-uart7-sleep-rx { + pins = "gpio31"; + function = "gpio"; + /* + * Configure a pull-up on RX. This is needed to avoid + * garbage data when the TX pin of the Bluetooth module + * is floating which may cause spurious wakeups. + */ + bias-pull-up; + }; + + qup_uart7_sleep_tx: qup-uart7-sleep-tx { + pins = "gpio30"; + function = "gpio"; + /* + * Configure pull-up on TX when it isn't actively driven + * to prevent BT SoC from receiving garbage during sleep. + */ + bias-pull-up; + }; + + sd_cd: sd-cd { + pins = "gpio91"; + function = "gpio"; + bias-pull-up; + }; + + tp_int_odl: tp-int-odl { + pins = "gpio102"; + function = "gpio"; + /* Has external pullup */ + bias-disable; + }; + + ts_int_l: ts-int-l { + pins = "gpio81"; + function = "gpio"; + /* Has external pullup */ + bias-pull-up; + }; + + ts_reset_l: ts-reset-l { + pins = "gpio105"; + function = "gpio"; + /* Has external pullup */ + bias-disable; + drive-strength = <2>; + }; + + uf_cam_en: uf-cam-en { + pins = "gpio6"; + function = "gpio"; + drive-strength = <2>; + /* Has external pulldown */ + bias-disable; + }; + + wf_cam_en: wf-cam-en { + pins = "gpio7"; + function = "gpio"; + drive-strength = <2>; + /* Has external pulldown */ + bias-disable; + }; +}; diff --git a/arch/arm64/boot/dts/qcom/sc7280-herobrine-herobrine-r1.dts b/arch/arm64/boot/dts/qcom/sc7280-herobrine-herobrine-r1.dts new file mode 100644 index 000000000000..f95273052da0 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/sc7280-herobrine-herobrine-r1.dts @@ -0,0 +1,313 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Google Herobrine board device tree source + * + * Copyright 2022 Google LLC. + */ + +/dts-v1/; + +#include "sc7280-herobrine.dtsi" + +/ { + model = "Google Herobrine (rev1+)"; + compatible = "google,herobrine", "qcom,sc7280"; +}; + +/* ADDITIONS TO NODES DEFINED IN PARENT DEVICE TREE FILES */ + +&ap_spi_fp { + status = "okay"; +}; + +/* + * Although the trackpad is really part of the herobrine baseboard, we'll + * put the actual definition in the board device tree since different boards + * might hook up different trackpads (or no i2c trackpad at all in the case + * of tablets / detachables). + */ +ap_tp_i2c: &i2c0 { + status = "okay"; + clock-frequency = <400000>; + + trackpad: trackpad@15 { + compatible = "elan,ekth3000"; + reg = <0x15>; + pinctrl-names = "default"; + pinctrl-0 = <&tp_int_odl>; + + interrupt-parent = <&tlmm>; + interrupts = <7 IRQ_TYPE_EDGE_FALLING>; + + vcc-supply = <&pp3300_z1>; + + wakeup-source; + }; +}; + +/* + * The touchscreen connector might come off the Qcard, at least in the case of + * eDP. Like the trackpad, we'll put it in the board device tree file since + * different boards have different touchscreens. + */ +ts_i2c: &i2c13 { + status = "okay"; + clock-frequency = <400000>; + + ap_ts: touchscreen@5c { + compatible = "hid-over-i2c"; + reg = <0x5c>; + pinctrl-names = "default"; + pinctrl-0 = <&ts_int_conn>, <&ts_rst_conn>; + + interrupt-parent = <&tlmm>; + interrupts = <55 IRQ_TYPE_LEVEL_LOW>; + + post-power-on-delay-ms = <500>; + hid-descr-addr = <0x0000>; + + vdd-supply = <&ts_avdd>; + }; +}; + +/* For nvme */ +&pcie1 { + status = "okay"; +}; + +/* For nvme */ +&pcie1_phy { + status = "okay"; +}; + +/* For eMMC */ +&sdhc_1 { + status = "okay"; +}; + +/* For SD Card */ +&sdhc_2 { + status = "okay"; +}; + +/* PINCTRL - BOARD-SPECIFIC */ + +/* + * Methodology for gpio-line-names: + * - If a pin goes to herobrine board and is named it gets that name. + * - If a pin goes to herobrine board and is not named, it gets no name. + * - If a pin is totally internal to Qcard then it gets Qcard name. + * - If a pin is not hooked up on Qcard, it gets no name. + */ + +&pm8350c_gpios { + gpio-line-names = "FLASH_STROBE_1", /* 1 */ + "AP_SUSPEND", + "PM8008_1_RST_N", + "", + "", + "", + "PMIC_EDP_BL_EN", + "PMIC_EDP_BL_PWM", + ""; +}; + +&tlmm { + gpio-line-names = "AP_TP_I2C_SDA", /* 0 */ + "AP_TP_I2C_SCL", + "SSD_RST_L", + "PE_WAKE_ODL", + "AP_SAR_SDA", + "AP_SAR_SCL", + "PRB_SC_GPIO_6", + "TP_INT_ODL", + "HP_I2C_SDA", + "HP_I2C_SCL", + + "GNSS_L1_EN", /* 10 */ + "GNSS_L5_EN", + "SPI_AP_MOSI", + "SPI_AP_MISO", + "SPI_AP_CLK", + "SPI_AP_CS0_L", + /* + * AP_FLASH_WP is crossystem ABI. Schematics + * call it BIOS_FLASH_WP_OD. + */ + "AP_FLASH_WP", + "", + "AP_EC_INT_L", + "", + + "UF_CAM_RST_L", /* 20 */ + "WF_CAM_RST_L", + "UART_AP_TX_DBG_RX", + "UART_DBG_TX_AP_RX", + "", + "PM8008_IRQ_1", + "HOST2WLAN_SOL", + "WLAN2HOST_SOL", + "MOS_BT_UART_CTS", + "MOS_BT_UART_RFR", + + "MOS_BT_UART_TX", /* 30 */ + "MOS_BT_UART_RX", + "PRB_SC_GPIO_32", + "HUB_RST_L", + "", + "", + "AP_SPI_FP_MISO", + "AP_SPI_FP_MOSI", + "AP_SPI_FP_CLK", + "AP_SPI_FP_CS_L", + + "AP_EC_SPI_MISO", /* 40 */ + "AP_EC_SPI_MOSI", + "AP_EC_SPI_CLK", + "AP_EC_SPI_CS_L", + "LCM_RST_L", + "EARLY_EUD_N", + "", + "DP_HOT_PLUG_DET", + "IO_BRD_MLB_ID0", + "IO_BRD_MLB_ID1", + + "IO_BRD_MLB_ID2", /* 50 */ + "SSD_EN", + "TS_I2C_SDA_CONN", + "TS_I2C_CLK_CONN", + "TS_RST_CONN", + "TS_INT_CONN", + "AP_I2C_TPM_SDA", + "AP_I2C_TPM_SCL", + "PRB_SC_GPIO_58", + "PRB_SC_GPIO_59", + + "EDP_HOT_PLUG_DET_N", /* 60 */ + "FP_TO_AP_IRQ_L", + "", + "AMP_EN", + "CAM0_MCLK_GPIO_64", + "CAM1_MCLK_GPIO_65", + "WF_CAM_MCLK", + "PRB_SC_GPIO_67", + "FPMCU_BOOT0", + "UF_CAM_SDA", + + "UF_CAM_SCL", /* 70 */ + "", + "", + "WF_CAM_SDA", + "WF_CAM_SCL", + "", + "", + "EN_FP_RAILS", + "FP_RST_L", + "PCIE1_CLKREQ_ODL", + + "EN_PP3300_DX_EDP", /* 80 */ + "SC_GPIO_81", + "FORCED_USB_BOOT", + "WCD_RESET_N", + "MOS_WLAN_EN", + "MOS_BT_EN", + "MOS_SW_CTRL", + "MOS_PCIE0_RST", + "MOS_PCIE0_CLKREQ_N", + "MOS_PCIE0_WAKE_N", + + "MOS_LAA_AS_EN", /* 90 */ + "SD_CD_ODL", + "", + "", + "MOS_BT_WLAN_SLIMBUS_CLK", + "MOS_BT_WLAN_SLIMBUS_DAT0", + "HP_MCLK", + "HP_BCLK", + "HP_DOUT", + "HP_DIN", + + "HP_LRCLK", /* 100 */ + "HP_IRQ", + "", + "", + "GSC_AP_INT_ODL", + "EN_PP3300_CODEC", + "AMP_BCLK", + "AMP_DIN", + "AMP_LRCLK", + "UIM1_DATA_GPIO_109", + + "UIM1_CLK_GPIO_110", /* 110 */ + "UIM1_RESET_GPIO_111", + "PRB_SC_GPIO_112", + "UIM0_DATA", + "UIM0_CLK", + "UIM0_RST", + "UIM0_PRESENT_ODL", + "SDM_RFFE0_CLK", + "SDM_RFFE0_DATA", + "WF_CAM_EN", + + "FASTBOOT_SEL_0", /* 120 */ + "SC_GPIO_121", + "FASTBOOT_SEL_1", + "SC_GPIO_123", + "FASTBOOT_SEL_2", + "SM_RFFE4_CLK_GRFC_8", + "SM_RFFE4_DATA_GRFC_9", + "WLAN_COEX_UART1_RX", + "WLAN_COEX_UART1_TX", + "PRB_SC_GPIO_129", + + "LCM_ID0", /* 130 */ + "LCM_ID1", + "", + "SDR_QLINK_REQ", + "SDR_QLINK_EN", + "QLINK0_WMSS_RESET_N", + "SMR526_QLINK1_REQ", + "SMR526_QLINK1_EN", + "SMR526_QLINK1_WMSS_RESET_N", + "PRB_SC_GPIO_139", + + "SAR1_IRQ_ODL", /* 140 */ + "SAR0_IRQ_ODL", + "PRB_SC_GPIO_142", + "", + "WCD_SWR_TX_CLK", + "WCD_SWR_TX_DATA0", + "WCD_SWR_TX_DATA1", + "WCD_SWR_RX_CLK", + "WCD_SWR_RX_DATA0", + "WCD_SWR_RX_DATA1", + + "DMIC01_CLK", /* 150 */ + "DMIC01_DATA", + "DMIC23_CLK", + "DMIC23_DATA", + "", + "", + "EC_IN_RW_ODL", + "HUB_EN", + "WCD_SWR_TX_DATA2", + "", + + "", /* 160 */ + "", + "", + "", + "", + "", + "", + "", + "", + "", + + "", /* 170 */ + "MOS_BLE_UART_TX", + "MOS_BLE_UART_RX", + "", + "", + ""; +}; diff --git a/arch/arm64/boot/dts/qcom/sc7280-herobrine.dts b/arch/arm64/boot/dts/qcom/sc7280-herobrine.dts deleted file mode 100644 index 7a92679a688b..000000000000 --- a/arch/arm64/boot/dts/qcom/sc7280-herobrine.dts +++ /dev/null @@ -1,14 +0,0 @@ -// SPDX-License-Identifier: (GPL-2.0+ OR MIT) -/* - * Google Herobrine board device tree source - * - * Copyright 2021 Google LLC. - */ - -#include "sc7280-herobrine.dtsi" - -/ { - model = "Google Herobrine"; - compatible = "google,herobrine", - "qcom,sc7280"; -}; diff --git a/arch/arm64/boot/dts/qcom/sc7280-herobrine.dtsi b/arch/arm64/boot/dts/qcom/sc7280-herobrine.dtsi index 4619fa9fcacd..dc17f2079695 100644 --- a/arch/arm64/boot/dts/qcom/sc7280-herobrine.dtsi +++ b/arch/arm64/boot/dts/qcom/sc7280-herobrine.dtsi @@ -1,87 +1,37 @@ // SPDX-License-Identifier: (GPL-2.0+ OR MIT) /* - * Google Herobrine board device tree source + * Google Herobrine baseboard device tree source * - * Copyright 2021 Google LLC. + * The set of things in this file is a bit loosely defined. It's roughly + * defined as the set of things that the child boards happen to have in + * common. Since all of the child boards started from the same original + * design this is hopefully a large set of things but as more derivatives + * appear things may "bubble down" out of this file. For things that are + * part of the reference design but might not exist on child nodes we will + * follow the lead of the SoC dtsi files and leave their status as "disabled". + * + * Copyright 2022 Google LLC. */ -/dts-v1/; - -#include <dt-bindings/gpio/gpio.h> -#include <dt-bindings/iio/qcom,spmi-adc7-pmk8350.h> -#include <dt-bindings/iio/qcom,spmi-adc7-pmr735a.h> #include <dt-bindings/input/gpio-keys.h> #include <dt-bindings/input/input.h> -#include <dt-bindings/pinctrl/qcom,pmic-gpio.h> -#include <dt-bindings/regulator/qcom,rpmh-regulator.h> - -#include "sc7280.dtsi" - -/* PMICs depend on spmi_bus label and so must come after SoC */ -#include "pm7325.dtsi" -#include "pm8350c.dtsi" -#include "pmk8350.dtsi" - -/* - * Reserved memory changes - * - * Delete all unused memory nodes and define the peripheral memory regions - * required by the board dts. - * - */ - -/delete-node/ &hyp_mem; -/delete-node/ &xbl_mem; -/delete-node/ &sec_apps_mem; -/* Increase the size from 2MB to 8MB */ -&rmtfs_mem { - reg = <0x0 0x83600000 0x0 0x800000>; -}; +#include "sc7280-qcard.dtsi" +#include "sc7280-chrome-common.dtsi" / { - reserved-memory { - adsp_mem: memory@86700000 { - reg = <0x0 0x86700000 0x0 0x2800000>; - no-map; - }; - - camera_mem: memory@8ad00000 { - reg = <0x0 0x8ad00000 0x0 0x500000>; - no-map; - }; - - venus_mem: memory@8b200000 { - reg = <0x0 0x8b200000 0x0 0x500000>; - no-map; - }; - - mpss_mem: memory@8b800000 { - reg = <0x0 0x8b800000 0x0 0xf600000>; - no-map; - }; - - wpss_mem: memory@9ae00000 { - reg = <0x0 0x9ae00000 0x0 0x1900000>; - no-map; - }; - - mba_mem: memory@9c700000 { - reg = <0x0 0x9c700000 0x0 0x200000>; - no-map; - }; - }; - - aliases { - serial0 = &uart5; - serial1 = &uart7; - }; - chosen { stdout-path = "serial0:115200n8"; }; - /* FIXED REGULATORS - parents above children */ + /* + * FIXED REGULATORS + * + * Sort order: + * 1. parents above children. + * 2. higher voltage above lower voltage. + * 3. alphabetically by node name. + */ /* This is the top level supply and variable voltage */ ppvar_sys: ppvar-sys-regulator { @@ -103,11 +53,11 @@ vin-supply = <&ppvar_sys>; }; - pp5000_s3: pp5000-s3-regulator { + pp5000_s5: pp5000-s5-regulator { compatible = "regulator-fixed"; - regulator-name = "pp5000_s3"; + regulator-name = "pp5000_s5"; - /* EC turns on with en_pp5000_s3; always on for AP */ + /* EC turns on with en_pp5000_s5; always on for AP */ regulator-always-on; regulator-boot-on; regulator-min-microvolt = <5000000>; @@ -129,7 +79,6 @@ vin-supply = <&ppvar_sys>; }; - pp3300_audio: pp3300_codec: pp3300-codec-regulator { compatible = "regulator-fixed"; regulator-name = "pp3300_codec"; @@ -137,7 +86,7 @@ regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; - gpio = <&tlmm 67 GPIO_ACTIVE_HIGH>; + gpio = <&tlmm 105 GPIO_ACTIVE_HIGH>; enable-active-high; pinctrl-names = "default"; pinctrl-0 = <&en_pp3300_codec>; @@ -145,11 +94,9 @@ vin-supply = <&pp3300_z1>; }; - pp3300_cam: - pp3300_edp: - pp3300_ts: pp3300-edp-regulator { + pp3300_left_in_mlb: pp3300-left-in-mlb-regulator { compatible = "regulator-fixed"; - regulator-name = "pp3300_edp"; + regulator-name = "pp3300_left_in_mlb"; regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; @@ -162,9 +109,9 @@ vin-supply = <&pp3300_z1>; }; - pp3300_fp: + pp3300_mcu_fp: pp3300_fp_ls: - pp3300_mcu: pp3300-fp-regulator { + pp3300_fp_mcu: pp3300-fp-regulator { compatible = "regulator-fixed"; regulator-name = "pp3300_fp"; @@ -175,7 +122,7 @@ regulator-always-on; /* - * WARNING: it is intentional that GPIO 42 isn't listed here. + * WARNING: it is intentional that GPIO 77 isn't listed here. * The userspace script for updating the fingerprint firmware * needs to control the FP regulators during a FW update, * hence the signal can't be owned by the kernel regulator. @@ -197,10 +144,10 @@ regulator-boot-on; regulator-always-on; - gpio = <&tlmm 24 GPIO_ACTIVE_HIGH>; + gpio = <&tlmm 157 GPIO_ACTIVE_HIGH>; enable-active-high; pinctrl-names = "default"; - pinctrl-0 = <&en_pp3300_hub>; + pinctrl-0 = <&hub_en>; vin-supply = <&pp3300_z1>; }; @@ -219,44 +166,44 @@ vin-supply = <&pp3300_z1>; }; - pp2850_uf_cam: pp2850-uf-cam { + pp3300_ssd: pp3300-ssd-regulator { compatible = "regulator-fixed"; - regulator-name = "pp2850_uf_cam"; + regulator-name = "pp3300_ssd"; - regulator-min-microvolt = <2850000>; - regulator-max-microvolt = <2850000>; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; - gpio = <&tlmm 6 GPIO_ACTIVE_HIGH>; + gpio = <&tlmm 51 GPIO_ACTIVE_HIGH>; enable-active-high; pinctrl-names = "default"; - pinctrl-0 = <&uf_cam_en>; + pinctrl-0 = <&ssd_en>; - vin-supply = <&pp3300_cam>; + vin-supply = <&pp3300_z1>; }; - pp2850_vcm_wf_cam: pp2850-vcm-wf-cam { + pp2850_vcm_wf_cam: pp2850-vcm-wf-cam-regulator { compatible = "regulator-fixed"; regulator-name = "pp2850_vcm_wf_cam"; regulator-min-microvolt = <2850000>; regulator-max-microvolt = <2850000>; - gpio = <&tlmm 7 GPIO_ACTIVE_HIGH>; + gpio = <&tlmm 119 GPIO_ACTIVE_HIGH>; enable-active-high; pinctrl-names = "default"; pinctrl-0 = <&wf_cam_en>; - vin-supply = <&pp3300_cam>; + vin-supply = <&pp3300_z1>; }; - pp2850_wf_cam: pp2850-wf-cam { + pp2850_wf_cam: pp2850-wf-cam-regulator { compatible = "regulator-fixed"; regulator-name = "pp2850_wf_cam"; regulator-min-microvolt = <2850000>; regulator-max-microvolt = <2850000>; - gpio = <&tlmm 7 GPIO_ACTIVE_HIGH>; + gpio = <&tlmm 119 GPIO_ACTIVE_HIGH>; enable-active-high; /* * The pinconf can only be referenced once so we put it on the @@ -266,7 +213,7 @@ * pinctrl-0 = <&wf_cam_en>; */ - vin-supply = <&pp3300_cam>; + vin-supply = <&pp3300_z1>; }; pp1800_fp: pp1800-fp-regulator { @@ -280,7 +227,7 @@ regulator-always-on; /* - * WARNING: it is intentional that GPIO 42 isn't listed here. + * WARNING: it is intentional that GPIO 77 isn't listed here. * The userspace script for updating the fingerprint firmware * needs to control the FP regulators during a FW update, * hence the signal can't be owned by the kernel regulator. @@ -293,34 +240,14 @@ status = "disabled"; }; - pp1800_uf_cam: pp1800-uf-cam { - compatible = "regulator-fixed"; - regulator-name = "pp1800_uf_cam"; - - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - - gpio = <&tlmm 6 GPIO_ACTIVE_HIGH>; - enable-active-high; - /* - * The pinconf can only be referenced once so we put it on the - * first regulator and comment it out here. - * - * pinctrl-names = "default"; - * pinctrl-0 = <&uf_cam_en>; - */ - - vin-supply = <&pp1800_l19b>; - }; - - pp1800_wf_cam: pp1800-wf-cam { + pp1800_wf_cam: pp1800-wf-cam-regulator { compatible = "regulator-fixed"; regulator-name = "pp1800_wf_cam"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; - gpio = <&tlmm 7 GPIO_ACTIVE_HIGH>; + gpio = <&tlmm 119 GPIO_ACTIVE_HIGH>; enable-active-high; /* * The pinconf can only be referenced once so we put it on the @@ -330,17 +257,17 @@ * pinctrl-0 = <&wf_cam_en>; */ - vin-supply = <&pp1800_l19b>; + vin-supply = <&vreg_l19b_s0>; }; - pp1200_wf_cam: pp1200-wf-cam { + pp1200_wf_cam: pp1200-wf-cam-regulator { compatible = "regulator-fixed"; regulator-name = "pp1200_wf_cam"; regulator-min-microvolt = <1200000>; regulator-max-microvolt = <1200000>; - gpio = <&tlmm 7 GPIO_ACTIVE_HIGH>; + gpio = <&tlmm 119 GPIO_ACTIVE_HIGH>; enable-active-high; /* * The pinconf can only be referenced once so we put it on the @@ -350,29 +277,11 @@ * pinctrl-0 = <&wf_cam_en>; */ - vin-supply = <&pp1200_l6b>; + vin-supply = <&pp3300_z1>; }; /* BOARD-SPECIFIC TOP LEVEL NODES */ - gpio_keys: gpio-keys { - compatible = "gpio-keys"; - status = "disabled"; - pinctrl-names = "default"; - pinctrl-0 = <&pen_pdct_l>; - - pen_insert: pen-insert { - label = "Pen Insert"; - - /* Insert = low, eject = high */ - gpios = <&tlmm 39 GPIO_ACTIVE_LOW>; - linux,code = <SW_PEN_INSERTED>; - linux,input-type = <EV_SW>; - wakeup-event-action = <EV_ACT_DEASSERTED>; - wakeup-source; - }; - }; - pwmleds { compatible = "pwm-leds"; status = "disabled"; @@ -385,263 +294,54 @@ }; }; -&apps_rsc { - pm7325-regulators { - compatible = "qcom,pm7325-rpmh-regulators"; - qcom,pmic-id = "b"; - - vdd19_pmu_pcie_i: - vdd19_pmu_rfa_i: - vreg_s1b_wlan: - vreg_s1b: smps1 { - regulator-min-microvolt = <1856000>; - regulator-max-microvolt = <2040000>; - }; - - vdd_pmu_aon_i: - vreg_s7b_wlan: - vreg_s7b: smps7 { - regulator-min-microvolt = <535000>; - regulator-max-microvolt = <1120000>; - }; - - vdd13_pmu_pcie_i: - vdd13_pmu_rfa_i: - vreg_s8b_wlan: - vreg_s8b: smps8 { - regulator-min-microvolt = <1256000>; - regulator-max-microvolt = <1500000>; - }; - - vdda_usb_ss_dp_core: - vreg_l1b: ldo1 { - regulator-min-microvolt = <825000>; - regulator-max-microvolt = <925000>; - regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; - }; - - vdda_usb_hs0_3p1: - vreg_l2b: ldo2 { - regulator-min-microvolt = <2700000>; - regulator-max-microvolt = <3544000>; - regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; - }; - - pp1200_l6b: - vdd_ufs_1p2: - vdd_vref: - vdda_csi01_1p2: - vdda_csi23_1p2: - vdda_csi4_1p2: - vdda_dsi0_1p2: - vdda_pcie0_1p2: - vdda_pcie1_1p2: - vdda_usb_ss_dp_1p2: - vdda_qlink0_1p2_ck: - vdda_qlink1_1p2_ck: - vreg_l6b_1p2: - vreg_l6b: ldo6 { - regulator-min-microvolt = <1120000>; - regulator-max-microvolt = <1408000>; - regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; - }; - - pp2950_l7b: - vreg_l7b: ldo7 { - regulator-min-microvolt = <2960000>; - regulator-max-microvolt = <2960000>; - regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; - }; - - codec_vcc: - pp1800_l18b_s0: - pp1800_ts: - vdd1: - vddpx_0: - vddpx_3: - vddpx_7: - vreg_l18b: ldo18 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <2000000>; - regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; - }; - - pp1800_l19b: - vddpx_ts: - vddpx_wl4otp: - vreg_l19b: ldo19 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; - }; - }; - - pm8350c-regulators { - compatible = "qcom,pm8350c-rpmh-regulators"; - qcom,pmic-id = "c"; - - vreg_s1c: smps1 { - regulator-min-microvolt = <2190000>; - regulator-max-microvolt = <2210000>; - }; +/* + * BOARD-LOCAL NAMES FOR REGULATORS THAT CONNECT TO QCARD + * + * Names are only listed here if regulators go somewhere other than a + * testpoint. + */ - vddpx_1: - vreg_s9c: smps9 { - regulator-min-microvolt = <1010000>; - regulator-max-microvolt = <1170000>; - }; +/* From Qcard to our board; ordered by PMIC-ID / rail number */ - pp1800_l1c: - pp1800_pen: - vdd_a_gfx_cs_1p1: - vdd_a_cxo_1p8: - vdd_qfprom: - vdda_apc_cs_1p8: - vdda_qrefs_1p8: - vdda_turing_q6_cs_1p8: - vdda_usb_hs0_1p8: - vreg_l1c: ldo1 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1980000>; - regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; - }; +pp1256_s8b: &vreg_s8b_1p256 {}; - dmic_vdd: - pp1800_alc5682: - pp1800_l2c: - pp1800_vreg_alc5682: - vreg_l2c: ldo2 { - regulator-min-microvolt = <1620000>; - regulator-max-microvolt = <1980000>; - regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; - }; +pp1800_l18b_s0: &vreg_l18b_1p8 {}; +pp1800_l18b: &vreg_l18b_1p8 {}; - pp3300_sar: - pp3300_sensor: - vreg_l3c: ldo3 { - regulator-min-microvolt = <2800000>; - regulator-max-microvolt = <3540000>; - regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; - }; +vreg_l19b_s0: &vreg_l19b_1p8 {}; - ppvar_uim1: - vddpx_5: - vreg_l4c: ldo4 { - regulator-min-microvolt = <1620000>; - regulator-max-microvolt = <3300000>; - regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; - }; +pp1800_alc5682: &vreg_l2c_1p8 {}; +pp1800_l2c: &vreg_l2c_1p8 {}; - pp2950_l5c: - uim_vcc: - vddpx_6: - vreg_l5c: ldo5 { - regulator-min-microvolt = <1620000>; - regulator-max-microvolt = <3300000>; - regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; - }; +vreg_l4c: &vreg_l4c_1p8_3p0 {}; - ppvar_l6c: - vddpx_2: - vreg_l6c: ldo6 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <2950000>; - regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; - }; +ppvar_l6c: &vreg_l6c_2p96 {}; - vreg_l7c: ldo7 { - regulator-min-microvolt = <3000000>; - regulator-max-microvolt = <3544000>; - regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; - }; +pp3000_l7c: &vreg_l7c_3p0 {}; - pp1800_prox: - pp1800_sar: - vreg_l8c: ldo8 { - regulator-min-microvolt = <1620000>; - regulator-max-microvolt = <2000000>; - regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; - }; +pp1800_prox: &vreg_l8c_1p8 {}; +pp1800_l8c: &vreg_l8c_1p8 {}; - pp2950_l9c: - vreg_l9c: ldo9 { - regulator-min-microvolt = <2960000>; - regulator-max-microvolt = <2960000>; - regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; - }; +pp2950_l9c: &vreg_l9c_2p96 {}; - vdd_a_gnss_0p9: - vdd_ufs_core: - vdd_usb_hs0_core: - vdd_vref_0p9: - vdda_csi01_0p9: - vdda_csi23_0p9: - vdda_csi4_0p9: - vdda_dsi0_pll_0p9: - vdda_dsi0_0p9: - vdda_pcie0_core: - vdda_pcie1_core: - vdda_qlink0_0p9: - vdda_qlink1_0p9: - vdda_qlink0_0p9_ck: - vdda_qlink1_0p9_ck: - vdda_qrefs_0p875: - vreg_l10c_0p8: - vreg_l10c: ldo10 { - regulator-min-microvolt = <720000>; - regulator-max-microvolt = <1050000>; - regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; - }; +pp1800_lcm: &vreg_l12c_1p8 {}; +pp1800_mipi: &vreg_l12c_1p8 {}; +pp1800_l12c: &vreg_l12c_1p8 {}; - pp2800_l11c: - vreg_l11c: ldo11 { - regulator-min-microvolt = <2800000>; - regulator-max-microvolt = <3544000>; - regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; - }; +pp3300_lcm: &vreg_l13c_3p0 {}; +pp3300_mipi: &vreg_l13c_3p0 {}; +pp3300_l13c: &vreg_l13c_3p0 {}; - pp1800_l12c: - vreg_l12c: ldo12 { - regulator-min-microvolt = <1650000>; - regulator-max-microvolt = <2000000>; - regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; - }; +/* From our board to Qcard; ordered same as node definition above */ - pp3300_l13c: - vreg_l13c: ldo13 { - regulator-min-microvolt = <2700000>; - regulator-max-microvolt = <3544000>; - regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; - }; +vreg_edp_bl: &ppvar_sys {}; - vreg_bob: bob { - regulator-min-microvolt = <3008000>; - regulator-max-microvolt = <3960000>; - regulator-initial-mode = <RPMH_REGULATOR_MODE_AUTO>; - }; - }; -}; - -ap_tp_i2c: &i2c1 { - status = "okay"; - clock-frequency = <400000>; - - trackpad: trackpad@15 { - compatible = "elan,ekth3000"; - reg = <0x15>; - pinctrl-names = "default"; - pinctrl-0 = <&tp_int_odl>; - - interrupt-parent = <&tlmm>; - interrupts = <102 IRQ_TYPE_EDGE_FALLING>; +ts_avdd: &pp3300_left_in_mlb {}; +vreg_edp_3p3: &pp3300_left_in_mlb {}; - vcc-supply = <&pp3300_z1>; +/* ADDITIONS TO NODES DEFINED IN PARENT DEVICE TREE FILES */ - wakeup-source; - }; -}; - -ap_h1_i2c: &i2c12 { +ap_i2c_tpm: &i2c14 { status = "okay"; clock-frequency = <400000>; @@ -650,82 +350,26 @@ ap_h1_i2c: &i2c12 { reg = <0x50>; pinctrl-names = "default"; - pinctrl-0 = <&h1_ap_int_odl>; - - interrupt-parent = <&tlmm>; - interrupts = <54 IRQ_TYPE_EDGE_RISING>; - }; -}; - -ap_ts_pen: &i2c13 { - status = "okay"; - clock-frequency = <400000>; - - ap_ts: touchscreen@10 { - compatible = "hid-over-i2c"; - reg = <0x10>; - pinctrl-names = "default"; - pinctrl-0 = <&ts_int_l>, <&ts_reset_l>; + pinctrl-0 = <&gsc_ap_int_odl>; interrupt-parent = <&tlmm>; - interrupts = <81 IRQ_TYPE_LEVEL_LOW>; - - post-power-on-delay-ms = <20>; - hid-descr-addr = <0x0001>; - - vdd-supply = <&pp3300_ts>; + interrupts = <104 IRQ_TYPE_EDGE_RISING>; }; }; -&pm7325_gpios { - status = "disabled"; /* No GPIOs are connected */ -}; - -&pmk8350_gpios { - status = "disabled"; /* No GPIOs are connected */ -}; +/* NVMe drive, enabled on a per-board basis */ +&pcie1 { + pinctrl-names = "default"; + pinctrl-0 = <&pcie1_clkreq_n>, <&ssd_rst_l>, <&pe_wake_odl>; -&pmk8350_pon { - status = "disabled"; + perst-gpio = <&tlmm 2 GPIO_ACTIVE_LOW>; + vddpe-3v3-supply = <&pp3300_ssd>; }; &pmk8350_rtc { status = "disabled"; }; -&pmk8350_vadc { - pmk8350_die_temp { - reg = <PMK8350_ADC7_DIE_TEMP>; - label = "pmk8350_die_temp"; - qcom,pre-scaling = <1 1>; - }; - - pmr735a_die_temp { - reg = <PMR735A_ADC7_DIE_TEMP>; - label = "pmr735a_die_temp"; - qcom,pre-scaling = <1 1>; - }; -}; - -&qfprom { - vcc-supply = <&vdd_qfprom>; -}; - -&qspi { - status = "okay"; - pinctrl-names = "default"; - pinctrl-0 = <&qspi_clk>, <&qspi_cs0>, <&qspi_data01>; - - flash@0 { - compatible = "jedec,spi-nor"; - reg = <0>; - - spi-max-frequency = <37500000>; - spi-tx-bus-width = <2>; - spi-rx-bus-width = <2>; - }; -}; - &qupv3_id_0 { status = "okay"; }; @@ -734,44 +378,50 @@ ap_ts_pen: &i2c13 { status = "okay"; }; -&sdhc_1 { - status = "okay"; - - pinctrl-names = "default", "sleep"; - pinctrl-0 = <&sdc1_on>; - pinctrl-1 = <&sdc1_off>; - vmmc-supply = <&pp2950_l7b>; - vqmmc-supply = <&pp1800_l19b>; -}; - +/* SD Card, enabled on a per-board basis */ &sdhc_2 { - status = "okay"; + pinctrl-0 = <&sdc2_clk>, <&sdc2_cmd>, <&sdc2_data>, <&sd_cd_odl>; + pinctrl-1 = <&sdc2_clk_sleep>, <&sdc2_cmd_sleep>, <&sdc2_data_sleep>, <&sd_cd_odl>; - pinctrl-names = "default", "sleep"; - pinctrl-0 = <&sdc2_on>; - pinctrl-1 = <&sdc2_off>; vmmc-supply = <&pp2950_l9c>; vqmmc-supply = <&ppvar_l6c>; cd-gpios = <&tlmm 91 GPIO_ACTIVE_LOW>; }; -ap_ec_spi: &spi8 { +/* Fingerprint, enabled on a per-board basis */ +ap_spi_fp: &spi9 { + pinctrl-0 = <&qup_spi9_data_clk>, <&qup_spi9_cs_gpio_init_high>, <&qup_spi9_cs_gpio>; + + cs-gpios = <&tlmm 39 GPIO_ACTIVE_LOW>; + + cros_ec_fp: ec@0 { + compatible = "google,cros-ec-spi"; + reg = <0>; + interrupt-parent = <&tlmm>; + interrupts = <61 IRQ_TYPE_LEVEL_LOW>; + pinctrl-names = "default"; + pinctrl-0 = <&fp_to_ap_irq_l>, <&fp_rst_l>, <&fpmcu_boot0>; + spi-max-frequency = <3000000>; + }; +}; + +ap_ec_spi: &spi10 { status = "okay"; + pinctrl-0 = <&qup_spi10_data_clk>, <&qup_spi10_cs_gpio_init_high>, <&qup_spi10_cs_gpio>; - pinctrl-0 = <&qup_spi8_data_clk>, <&qup_spi8_cs_gpio_init_high>, <&qup_spi8_cs_gpio>; - cs-gpios = <&tlmm 35 GPIO_ACTIVE_LOW>; + cs-gpios = <&tlmm 43 GPIO_ACTIVE_LOW>; cros_ec: ec@0 { compatible = "google,cros-ec-spi"; reg = <0>; interrupt-parent = <&tlmm>; - interrupts = <142 IRQ_TYPE_LEVEL_LOW>; + interrupts = <18 IRQ_TYPE_LEVEL_LOW>; pinctrl-names = "default"; pinctrl-0 = <&ap_ec_int_l>; spi-max-frequency = <3000000>; - cros_ec_pwm: ec-pwm { + cros_ec_pwm: pwm { compatible = "google,cros-ec-pwm"; #pwm-cells = <1>; }; @@ -841,15 +491,6 @@ ap_ec_spi: &spi8 { >; }; -&uart5 { - compatible = "qcom,geni-debug-uart"; - status = "okay"; -}; - -&uart7 { - status = "okay"; -}; - &usb_1 { status = "okay"; }; @@ -860,17 +501,10 @@ ap_ec_spi: &spi8 { &usb_1_hsphy { status = "okay"; - - vdda-pll-supply = <&vdd_usb_hs0_core>; - vdda33-supply = <&vdda_usb_hs0_3p1>; - vdda18-supply = <&vdda_usb_hs0_1p8>; }; &usb_1_qmpphy { status = "okay"; - - vdda-phy-supply = <&vdda_usb_ss_dp_1p2>; - vdda-pll-supply = <&vdda_usb_ss_dp_core>; }; &usb_2 { @@ -883,530 +517,269 @@ ap_ec_spi: &spi8 { &usb_2_hsphy { status = "okay"; +}; + +/* PINCTRL - ADDITIONS TO NODES IN PARENT DEVICE TREE FILES */ - vdda-pll-supply = <&vdd_usb_hs0_core>; - vdda33-supply = <&vdda_usb_hs0_3p1>; - vdda18-supply = <&vdda_usb_hs0_1p8>; +&dp_hot_plug_det { + bias-disable; }; -/* PINCTRL - additions to nodes defined in sc7280.dtsi */ +&pcie1_clkreq_n { + bias-pull-up; + drive-strength = <2>; +}; &qspi_cs0 { bias-disable; + drive-strength = <8>; }; &qspi_clk { bias-disable; + drive-strength = <8>; }; &qspi_data01 { /* High-Z when no transfers; nice to park the lines */ bias-pull-up; + drive-strength = <8>; }; -&qup_uart5_rx { +/* For ap_tp_i2c */ +&qup_i2c0_data_clk { + /* Has external pull */ + bias-disable; drive-strength = <2>; - bias-pull-up; }; -&qup_uart5_tx { - drive-strength = <2>; +/* For ap_i2c_tpm */ +&qup_i2c14_data_clk { + /* Has external pull */ bias-disable; + drive-strength = <2>; }; -&qup_uart7_cts { - /* - * Configure a pull-down on CTS to match the pull of - * the Bluetooth module. - */ - bias-pull-down; +/* For ap_spi_fp */ +&qup_spi9_data_clk { + bias-disable; + drive-strength = <2>; }; -&qup_uart7_rts { - /* We'll drive RTS, so no pull */ - drive-strength = <2>; +/* For ap_spi_fp */ +&qup_spi9_cs_gpio { bias-disable; + drive-strength = <2>; }; -&qup_uart7_tx { - /* We'll drive TX, so no pull */ +/* For ap_ec_spi */ +&qup_spi10_data_clk { + bias-disable; drive-strength = <2>; +}; + +/* For ap_ec_spi */ +&qup_spi10_cs_gpio { bias-disable; + drive-strength = <2>; }; -&qup_uart7_rx { - /* - * Configure a pull-up on RX. This is needed to avoid - * garbage data when the TX pin of the Bluetooth module is - * in tri-state (module powered off or not driving the - * signal yet). - */ +/* For uart_dbg */ +&qup_uart5_rx { bias-pull-up; }; -&sdc1_on { - clk { - bias-disable; - drive-strength = <16>; - }; - - cmd { - bias-pull-up; - drive-strength = <10>; - }; - - data { - bias-pull-up; - drive-strength = <10>; - }; - - rclk { - bias-pull-down; - }; +/* For uart_dbg */ +&qup_uart5_tx { + bias-disable; + drive-strength = <2>; }; -&sdc2_on { - clk { - bias-disable; - drive-strength = <16>; - }; - - cmd { - bias-pull-up; - drive-strength = <10>; - }; +&sdc2_clk { + bias-disable; + drive-strength = <16>; +}; - data { - bias-pull-up; - drive-strength = <10>; - }; +&sdc2_cmd { + bias-pull-up; + drive-strength = <10>; +}; - sd-cd { - pins = "gpio91"; - bias-pull-up; - }; +&sdc2_data { + bias-pull-up; + drive-strength = <10>; }; /* PINCTRL - board-specific pinctrl */ -&pm8350c_gpios { - gpio-line-names = "AP_SUSPEND", - "", - "", - "AP_BL_EN", - "", - "SD_CD_ODL", - "", - "", - "AP_BL_PWM"; - - ap_bl_en: ap-bl-en { - pins = "gpio4"; - function = "normal"; - qcom,drive-strength = <PMIC_GPIO_STRENGTH_LOW>; - bias-disable; +&pm7325_gpios { + /* + * On a quick glance it might look like KYPD_VOL_UP_N is used, but + * that only passes through to a debug connector and not to the actual + * volume up key. + */ + status = "disabled"; /* No GPIOs are connected */ +}; - /* Force backlight to be disabled to match state at boot. */ - output-low; - }; +&pmk8350_gpios { + status = "disabled"; /* No GPIOs are connected */ }; &tlmm { - gpio-line-names = "HP_I2C_SDA", /* 0 */ - "HP_I2C_SCL", - "SSD_RST_L", - "PE_WAKE_ODL", - "AP_TP_I2C_SDA", - "AP_TP_I2C_SCL", - "UF_CAM_EN", - "WF_CAM_EN", - "AP_SAR_SENSOR_SDA", - "AP_SAR_SENSOR_SCL", - - "", /* 10 */ - "", - "AP_SPI_MOSI", - "AP_SPI_MISO", - "AP_SPI_CLK", - "AP_SPI_CS0_L", - "", - "", - "EDP_HPD", - "", - - "UF_CAM_RST_L", /* 20 */ - "WF_CAM_RST_L", - "UART_AP_TX_DBG_RX", - "UART_DBG_TX_AP_RX", - "EN_PP3300_HUB", - "", - "HOST2WLAN_SOL", - "WLAN2HOST_SOL", - "BT_UART_CTS", - "BT_UART_RTS", - - "BT_UART_TXD", /* 30 */ - "BT_UART_RXD", - "AP_EC_SPI_MISO", - "AP_EC_SPI_MOSI", - "AP_EC_SPI_CLK", - "AP_EC_SPI_CS_L", - "", - "", - "", - "PEN_PDCT_L", - - "IO_BRD_ID0", /* 40 */ - "IO_BRD_ID1", - "EN_FP_RAILS", - "PEN_IRQ_L", - "AP_SPI_FP_MISO", - "AP_SPI_FP_MOSI", - "AP_SPI_FP_CLK", - "AP_SPI_FP_CS_L", - "AP_H1_SPI_MISO", - "AP_H1_SPI_MOSI", - - "AP_H1_SPI_CLK", /* 50 */ - "AP_H1_SPI_CS_L", - "AP_TS_PEN_I2C_SDA", - "AP_TS_PEN_I2C_SCL", - "H1_AP_INT_ODL", - "", - "LCM_RST_1V8_L", - "AMP_EN", - "", - "DP_HOT_PLUG_DET", - - "HUB_RST_L", /* 60 */ - "FP_TO_AP_IRQ_L", - "", - "", - "UF_CAM_MCLK", - "WF_CAM_MCLK", - "IO_BRD_ID2", - "EN_PP3300_CODEC", - "EC_IN_RW_ODL", - "UF_CAM_SDA", - - "UF_CAM_SCL", /* 70 */ - "WF_CAM_SDA", - "WF_CAM_SCL", - "AP_BRD_ID0", - "AP_BRD_ID1", - "AP_BRD_ID2", - "", - "FPMCU_BOOT0", - "FP_RST_L", - "PE_CLKREQ_ODL", - - "EN_EDP_PP3300", /* 80 */ - "TS_INT_L", - "FORCE_USB_BOOT", - "WCD_RST_L", - "WLAN_EN", - "BT_EN", - "WLAN_SW_CTRL", - "PCIE0_RESET_L", - "PCIE0_CLK_REQ_L", - "PCIE0_WAKE_L", - - "AS_EN", /* 90 */ - "SD_CD_ODL", - "", - /* - * AP_FLASH_WP_L is crossystem ABI. Schematics - * call it BIOS_FLASH_WP_L. - */ - "AP_FLASH_WP_L", - "BT_WLAN_SB_CLK", - "BT_WLAN_SB_DATA", - "HP_MCLK", - "HP_BCLK", - "HP_DOUT", - "HP_DIN", - - "HP_LRCLK", /* 100 */ - "HP_IRQ", - "TP_INT_ODL", - "", - "IO_SKU_ID2", - "TS_RESET_L", - "AMP_BCLK", - "AMP_DIN", - "AMP_LRCLK", - "UIM2_DATA", - - "UIM2_CLK", /* 110 */ - "UIM2_RST", - "UIM2_PRESENT", - "UIM1_DATA", - "UIM1_CLK", - "UIM1_RST", - "", - "RFFE0_CLK", - "RFFE0_DATA/BOOT_CONFIG_0", - "RFFE1_CLK", - - "RFFE1_DATA/BOOT_CONFIG_1", /* 120 */ - "RFFE2_CLK", - "RFFE2_DATA/BOOT_CONFIG_2", - "RFFE3_CLK", - "RFFE3_DATA/BOOT_CONFIG_3", - "RFFE4_CLK", - "RFFE4_DATA", - "WCI2_LTE_COEX_RXD", - "WCI2_LTE_COEX_TXD", - "IO_SKU_ID0", - - "IO_SKU_ID1", /* 130 */ - "", - "", - "QLINK0_REQ", - "QLINK0_EN", - "QLINK0_WMSS_RESET_L", - "QLINK1_REQ", - "QLINK1_EN", - "QLINK1_WMSS_RESET_L", - "FORCED_USB_BOOT_POL", - - "", /* 140 */ - "P_SENSOR_INT_L", - "AP_EC_INT_L", - "", - "WCD_SWR_TX_CLK", - "WCD_SWR_TX_DATA_0", - "WCD_SWR_TX_DATA_1", - "WCD_SWR_RX_CLK", - "WCD_SWR_RX_DATA_0", - "WCD_SWR_RX_DATA_1", - - "", /* 150 */ - "", - "", - "", - "", - "", - "", - "", - "WCD_SWR_TX_DATA_2", - "", - - "", /* 160 */ - "", - "", - "", - "", - "", - "", - "", - "", - "", - - "", /* 170 */ - "SENS_UART_TXD", - "SENS_UART_RXD", - "", - "", - ""; - - /* - * pinctrl settings for pins that have no real owners. - */ + /* pinctrl settings for pins that have no real owners. */ pinctrl-names = "default"; - pinctrl-0 = <&bios_flash_wp_l>; + pinctrl-0 = <&bios_flash_wp_od>; amp_en: amp-en { - pins = "gpio57"; + pins = "gpio63"; function = "gpio"; - bias-pull-down; + bias-disable; + drive-strength = <2>; }; ap_ec_int_l: ap-ec-int-l { - pins = "gpio142"; - input-enable; + pins = "gpio18"; + function = "gpio"; bias-pull-up; }; - bios_flash_wp_l: bios-flash-wp-l { - pins = "gpio93"; + bios_flash_wp_od: bios-flash-wp-od { + pins = "gpio16"; function = "gpio"; - input-enable; + /* Has external pull */ bias-disable; }; - bt_en: bt-en { - pins = "gpio85"; - function = "gpio"; - drive-strength = <2>; - output-low; - bias-pull-down; - }; - en_fp_rails: en-fp-rails { - pins = "gpio42"; + pins = "gpio77"; + function = "gpio"; + bias-disable; drive-strength = <2>; output-high; - bias-disable; }; en_pp3300_codec: en-pp3300-codec { - pins = "gpio67"; - drive-strength = <2>; + pins = "gpio105"; + function = "gpio"; bias-disable; + drive-strength = <2>; }; en_pp3300_dx_edp: en-pp3300-dx-edp { pins = "gpio80"; function = "gpio"; - drive-strength = <2>; - /* Has external pulldown */ bias-disable; + drive-strength = <2>; }; - en_pp3300_hub: en-pp3300-hub { - pins = "gpio24"; + fp_rst_l: fp-rst-l { + pins = "gpio78"; function = "gpio"; - drive-strength = <2>; - /* Has external pulldown */ bias-disable; + drive-strength = <2>; + output-high; }; fp_to_ap_irq_l: fp-to-ap-irq-l { pins = "gpio61"; function = "gpio"; - input-enable; /* Has external pullup */ bias-disable; }; - h1_ap_int_odl: h1-ap-int-odl { - pins = "gpio54"; + fpmcu_boot0: fpmcu-boot0 { + pins = "gpio68"; function = "gpio"; - input-enable; - bias-pull-up; + bias-disable; + output-low; }; - hp_irq: hp-irq { - pins = "gpio101"; + gsc_ap_int_odl: gsc-ap-int-odl { + pins = "gpio104"; function = "gpio"; bias-pull-up; }; - p_sensor_int_l: p-sensor-int-l { - pins = "gpio141"; + hp_irq: hp-irq { + pins = "gpio101"; function = "gpio"; - input-enable; bias-pull-up; }; - pen_irq_l: pen-irq-l { - pins = "gpio43"; + hub_en: hub-en { + pins = "gpio157"; function = "gpio"; - /* Has external pullup */ bias-disable; + drive-strength = <2>; }; - pen_pdct_l: pen-pdct-l { - pins = "gpio39"; + pe_wake_odl: pe-wake-odl { + pins = "gpio3"; function = "gpio"; - /* Has external pullup */ + /* Has external pull */ bias-disable; + drive-strength = <2>; }; - qup_spi8_cs_gpio_init_high: qup-spi8-cs-gpio-init-high { - pins = "gpio35"; - output-high; - }; - - qup_spi11_cs_gpio_init_high: qup-spi11-cs-gpio-init-high { - pins = "gpio47"; - output-high; - }; - - qup_spi12_cs_gpio_init_high: qup-spi12-cs-gpio-init-high { - pins = "gpio51"; + /* For ap_spi_fp */ + qup_spi9_cs_gpio_init_high: qup-spi9-cs-gpio-init-high { + pins = "gpio39"; + function = "gpio"; output-high; }; - qup_uart7_sleep_cts: qup-uart7-sleep-cts { - pins = "gpio28"; + /* For ap_ec_spi */ + qup_spi10_cs_gpio_init_high: qup-spi10-cs-gpio-init-high { + pins = "gpio43"; function = "gpio"; - /* - * Configure a pull-down on CTS to match the pull of - * the Bluetooth module. - */ - bias-pull-down; + output-high; }; - qup_uart7_sleep_rts: qup-uart7-sleep-rts { - pins = "gpio29"; + sar0_irq_odl: sar0-irq-odl { + pins = "gpio141"; function = "gpio"; - /* - * Configure pull-down on RTS. As RTS is active low - * signal, pull it low to indicate the BT SoC that it - * can wakeup the system anytime from suspend state by - * pulling RX low (by sending wakeup bytes). - */ - bias-pull-down; + bias-pull-up; }; - qup_uart7_sleep_rx: qup-uart7-sleep-rx { - pins = "gpio31"; + sar1_irq_odl: sar0-irq-odl { + pins = "gpio140"; function = "gpio"; - /* - * Configure a pull-up on RX. This is needed to avoid - * garbage data when the TX pin of the Bluetooth module - * is floating which may cause spurious wakeups. - */ bias-pull-up; }; - qup_uart7_sleep_tx: qup-uart7-sleep-tx { - pins = "gpio30"; + sd_cd_odl: sd-cd-odl { + pins = "gpio91"; function = "gpio"; - /* - * Configure pull-up on TX when it isn't actively driven - * to prevent BT SoC from receiving garbage during sleep. - */ bias-pull-up; }; - tp_int_odl: tp-int-odl { - pins = "gpio102"; + ssd_en: ssd-en { + pins = "gpio51"; function = "gpio"; - /* Has external pullup */ bias-disable; + drive-strength = <2>; }; - ts_int_l: ts-int-l { - pins = "gpio81"; - function = "gpio"; - /* Has external pullup */ - bias-pull-up; - }; - - ts_reset_l: ts-reset-l { - pins = "gpio105"; + ssd_rst_l: ssd-rst-l { + pins = "gpio2"; function = "gpio"; - /* Has external pullup */ bias-disable; drive-strength = <2>; + output-low; }; - uf_cam_en: uf-cam-en { - pins = "gpio6"; + tp_int_odl: tp-int-odl { + pins = "gpio7"; function = "gpio"; - drive-strength = <2>; - /* Has external pulldown */ + /* Has external pullup */ bias-disable; }; wf_cam_en: wf-cam-en { - pins = "gpio7"; + pins = "gpio119"; function = "gpio"; - drive-strength = <2>; /* Has external pulldown */ bias-disable; + drive-strength = <2>; }; }; diff --git a/arch/arm64/boot/dts/qcom/sc7280-idp-ec-h1.dtsi b/arch/arm64/boot/dts/qcom/sc7280-idp-ec-h1.dtsi index 0896a6151817..a7c346aa3b02 100644 --- a/arch/arm64/boot/dts/qcom/sc7280-idp-ec-h1.dtsi +++ b/arch/arm64/boot/dts/qcom/sc7280-idp-ec-h1.dtsi @@ -20,7 +20,7 @@ ap_ec_spi: &spi10 { pinctrl-0 = <&ap_ec_int_l>; spi-max-frequency = <3000000>; - cros_ec_pwm: ec-pwm { + cros_ec_pwm: pwm { compatible = "google,cros-ec-pwm"; #pwm-cells = <1>; }; diff --git a/arch/arm64/boot/dts/qcom/sc7280-idp.dts b/arch/arm64/boot/dts/qcom/sc7280-idp.dts index 9b991ba5daaf..a7be133a782f 100644 --- a/arch/arm64/boot/dts/qcom/sc7280-idp.dts +++ b/arch/arm64/boot/dts/qcom/sc7280-idp.dts @@ -56,6 +56,10 @@ }; }; +&bluetooth { + vddio-supply = <&vreg_l19b_1p8>; +}; + &ipa { status = "okay"; modem-init; @@ -80,3 +84,19 @@ qcom,pre-scaling = <1 1>; }; }; + +&usb_2 { + status = "okay"; +}; + +&usb_2_dwc3 { + dr_mode = "host"; +}; + +&usb_2_hsphy { + status = "okay"; + + vdda-pll-supply = <&vreg_l10c_0p8>; + vdda33-supply = <&vreg_l2b_3p0>; + vdda18-supply = <&vreg_l1c_1p8>; +}; diff --git a/arch/arm64/boot/dts/qcom/sc7280-idp.dtsi b/arch/arm64/boot/dts/qcom/sc7280-idp.dtsi index d623d71d8bd4..ecbf2b89d896 100644 --- a/arch/arm64/boot/dts/qcom/sc7280-idp.dtsi +++ b/arch/arm64/boot/dts/qcom/sc7280-idp.dtsi @@ -5,7 +5,6 @@ * Copyright (c) 2021, The Linux Foundation. All rights reserved. */ -#include <dt-bindings/gpio/gpio.h> #include <dt-bindings/iio/qcom,spmi-adc7-pmk8350.h> #include <dt-bindings/input/linux-event-codes.h> #include "sc7280.dtsi" @@ -13,7 +12,14 @@ #include "pm8350c.dtsi" #include "pmk8350.dtsi" +#include "sc7280-chrome-common.dtsi" + / { + aliases { + bluetooth0 = &bluetooth; + serial1 = &uart7; + }; + gpio-keys { compatible = "gpio-keys"; label = "gpio-keys"; @@ -45,58 +51,6 @@ }; }; -/* - * Reserved memory changes - * - * Delete all unused memory nodes and define the peripheral memory regions - * required by the board dts. - * - */ - -/delete-node/ &hyp_mem; -/delete-node/ &xbl_mem; -/delete-node/ &reserved_xbl_uefi_log; -/delete-node/ &sec_apps_mem; - -/* Increase the size from 2.5MB to 8MB */ -&rmtfs_mem { - reg = <0x0 0x9c900000 0x0 0x800000>; -}; - -/ { - reserved-memory { - adsp_mem: memory@86700000 { - reg = <0x0 0x86700000 0x0 0x2800000>; - no-map; - }; - - camera_mem: memory@8ad00000 { - reg = <0x0 0x8ad00000 0x0 0x500000>; - no-map; - }; - - venus_mem: memory@8b200000 { - reg = <0x0 0x8b200000 0x0 0x500000>; - no-map; - }; - - mpss_mem: memory@8b800000 { - reg = <0x0 0x8b800000 0x0 0xf600000>; - no-map; - }; - - wpss_mem: memory@9ae00000 { - reg = <0x0 0x9ae00000 0x0 0x1900000>; - no-map; - }; - - mba_mem: memory@9c700000 { - reg = <0x0 0x9c700000 0x0 0x200000>; - no-map; - }; - }; -}; - &apps_rsc { pm7325-regulators { compatible = "qcom,pm7325-rpmh-regulators"; @@ -313,20 +267,6 @@ vcc-supply = <&vreg_l1c_1p8>; }; -&qspi { - status = "okay"; - pinctrl-names = "default"; - pinctrl-0 = <&qspi_clk>, <&qspi_cs0>, <&qspi_data01>; - - flash@0 { - compatible = "jedec,spi-nor"; - reg = <0>; - spi-max-frequency = <37500000>; - spi-tx-bus-width = <2>; - spi-rx-bus-width = <2>; - }; -}; - &qupv3_id_0 { status = "okay"; }; @@ -335,20 +275,9 @@ status = "okay"; }; -&remoteproc_mpss { - status = "okay"; - compatible = "qcom,sc7280-mss-pil"; - iommus = <&apps_smmu 0x124 0x0>, <&apps_smmu 0x488 0x7>; - memory-region = <&mba_mem &mpss_mem>; -}; - &sdhc_1 { status = "okay"; - pinctrl-names = "default", "sleep"; - pinctrl-0 = <&sdc1_on>; - pinctrl-1 = <&sdc1_off>; - non-removable; no-sd; no-sdio; @@ -360,9 +289,8 @@ &sdhc_2 { status = "okay"; - pinctrl-names = "default", "sleep"; - pinctrl-0 = <&sdc2_on>; - pinctrl-1 = <&sdc2_off>; + pinctrl-0 = <&sdc2_clk>, <&sdc2_cmd>, <&sdc2_data>, <&sd_cd>; + pinctrl-1 = <&sdc2_clk_sleep>, <&sdc2_cmd_sleep>, <&sdc2_data_sleep>, <&sd_cd>; vmmc-supply = <&vreg_l9c_2p9>; vqmmc-supply = <&vreg_l6c_2p9>; @@ -398,22 +326,6 @@ vdda-pll-supply = <&vreg_l1b_0p8>; }; -&usb_2 { - status = "okay"; -}; - -&usb_2_dwc3 { - dr_mode = "peripheral"; -}; - -&usb_2_hsphy { - status = "okay"; - - vdda-pll-supply = <&vreg_l10c_0p8>; - vdda33-supply = <&vreg_l2b_3p0>; - vdda18-supply = <&vreg_l1c_1p8>; -}; - &uart7 { status = "okay"; @@ -422,10 +334,31 @@ <&tlmm 31 IRQ_TYPE_EDGE_FALLING>; pinctrl-names = "default", "sleep"; pinctrl-1 = <&qup_uart7_sleep_cts>, <&qup_uart7_sleep_rts>, <&qup_uart7_sleep_tx>, <&qup_uart7_sleep_rx>; + + bluetooth: bluetooth { + compatible = "qcom,wcn6750-bt"; + pinctrl-names = "default"; + pinctrl-0 = <&bt_en>, <&sw_ctrl>; + enable-gpios = <&tlmm 85 GPIO_ACTIVE_HIGH>; + swctrl-gpios = <&tlmm 86 GPIO_ACTIVE_HIGH>; + vddaon-supply = <&vreg_s7b_0p9>; + vddbtcxmx-supply = <&vreg_s7b_0p9>; + vddrfacmn-supply = <&vreg_s7b_0p9>; + vddrfa0p8-supply = <&vreg_s7b_0p9>; + vddrfa1p7-supply = <&vreg_s1b_1p8>; + vddrfa1p2-supply = <&vreg_s8b_1p2>; + vddrfa2p2-supply = <&vreg_s1c_2p2>; + vddasd-supply = <&vreg_l11c_2p8>; + max-speed = <3200000>; + }; }; /* PINCTRL - additions to nodes defined in sc7280.dtsi */ +&dp_hot_plug_det { + bias-disable; +}; + &pm7325_gpios { key_vol_up_default: key-vol-up-default { pins = "gpio6"; @@ -437,6 +370,11 @@ }; }; +&pcie1_clkreq_n { + bias-pull-up; + drive-strength = <2>; +}; + &qspi_cs0 { bias-disable; }; @@ -490,7 +428,48 @@ bias-pull-up; }; +&sdc1_clk { + bias-disable; + drive-strength = <16>; +}; + +&sdc1_cmd { + bias-pull-up; + drive-strength = <10>; +}; + +&sdc1_data { + bias-pull-up; + drive-strength = <10>; +}; + +&sdc1_rclk { + bias-pull-down; +}; + +&sdc2_clk { + bias-disable; + drive-strength = <16>; +}; + +&sdc2_cmd { + bias-pull-up; + drive-strength = <10>; +}; + +&sdc2_data { + bias-pull-up; + drive-strength = <10>; +}; + &tlmm { + bt_en: bt-en { + pins = "gpio85"; + function = "gpio"; + output-low; + bias-disable; + }; + nvme_pwren: nvme-pwren { function = "gpio"; }; @@ -554,47 +533,17 @@ */ bias-pull-up; }; -}; - -&sdc1_on { - clk { - bias-disable; - drive-strength = <16>; - }; - - cmd { - bias-pull-up; - drive-strength = <10>; - }; - data { + sd_cd: sd-cd { + pins = "gpio91"; + function = "gpio"; bias-pull-up; - drive-strength = <10>; }; - rclk { + sw_ctrl: sw-ctrl { + pins = "gpio86"; + function = "gpio"; bias-pull-down; }; }; -&sdc2_on { - clk { - bias-disable; - drive-strength = <16>; - }; - - cmd { - bias-pull-up; - drive-strength = <10>; - }; - - data { - bias-pull-up; - drive-strength = <10>; - }; - - sd-cd { - pins = "gpio91"; - bias-pull-up; - }; -}; diff --git a/arch/arm64/boot/dts/qcom/sc7280-idp2.dts b/arch/arm64/boot/dts/qcom/sc7280-idp2.dts index 0382c770650a..73b9911dd802 100644 --- a/arch/arm64/boot/dts/qcom/sc7280-idp2.dts +++ b/arch/arm64/boot/dts/qcom/sc7280-idp2.dts @@ -23,6 +23,10 @@ }; }; +&bluetooth { + vddio-supply = <&vreg_l18b_1p8>; +}; + &nvme_pwren { pins = "gpio51"; }; diff --git a/arch/arm64/boot/dts/qcom/sc7280-qcard.dtsi b/arch/arm64/boot/dts/qcom/sc7280-qcard.dtsi new file mode 100644 index 000000000000..b833ba1e8f4a --- /dev/null +++ b/arch/arm64/boot/dts/qcom/sc7280-qcard.dtsi @@ -0,0 +1,547 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * sc7280 Qcard device tree source + * + * Qcard PCB has the processor, RAM, eMMC (if stuffed), and eDP connector (if + * stuffed) on it. This device tree tries to encapsulate all the things that + * all boards using Qcard will have in common. Given that there are stuffing + * options, some things may be left with status "disabled" and enabled in + * the actual board device tree files. + * + * Copyright 2022 Google LLC. + */ + +#include <dt-bindings/iio/qcom,spmi-adc7-pmk8350.h> +#include <dt-bindings/iio/qcom,spmi-adc7-pmr735a.h> +#include <dt-bindings/pinctrl/qcom,pmic-gpio.h> +#include <dt-bindings/regulator/qcom,rpmh-regulator.h> + +#include "sc7280.dtsi" + +/* PMICs depend on spmi_bus label and so must come after SoC */ +#include "pm7325.dtsi" +#include "pm8350c.dtsi" +#include "pmk8350.dtsi" + +/ { + aliases { + bluetooth0 = &bluetooth; + serial0 = &uart5; + serial1 = &uart7; + }; +}; + +&apps_rsc { + /* + * Regulators are given labels corresponding to the various names + * they are referred to on schematics. They are also given labels + * corresponding to named voltage inputs on the SoC or components + * bundled with the SoC (like radio companion chips). We totally + * ignore it when one regulator is the input to another regulator. + * That's handled automatically by the initial config given to + * RPMH by the firmware. + * + * Regulators that the HLOS (High Level OS) doesn't touch at all + * are left out of here since they are managed elsewhere. + */ + + pm7325-regulators { + compatible = "qcom,pm7325-rpmh-regulators"; + qcom,pmic-id = "b"; + + vdd19_pmu_pcie_i: + vdd19_pmu_rfa_i: + vreg_s1b_1p856: smps1 { + regulator-min-microvolt = <1856000>; + regulator-max-microvolt = <2040000>; + }; + + vdd_pmu_aon_i: + vdd09_pmu_rfa_i: + vdd095_mx_pmu: + vdd095_pmu: + vreg_s7b_0p952: smps7 { + regulator-min-microvolt = <535000>; + regulator-max-microvolt = <1120000>; + }; + + vdd13_pmu_rfa_i: + vdd13_pmu_pcie_i: + vreg_s8b_1p256: smps8 { + regulator-min-microvolt = <1256000>; + regulator-max-microvolt = <1500000>; + }; + + vdd_a_usbssdp_0_core: + vreg_l1b_0p912: ldo1 { + regulator-min-microvolt = <825000>; + regulator-max-microvolt = <925000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vdd_a_usbhs_3p1: + vreg_l2b_3p072: ldo2 { + regulator-min-microvolt = <2700000>; + regulator-max-microvolt = <3544000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vdd_a_csi_0_1_1p2: + vdd_a_csi_2_3_1p2: + vdd_a_csi_4_1p2: + vdd_a_dsi_0_1p2: + vdd_a_edp_0_1p2: + vdd_a_qlink_0_1p2: + vdd_a_qlink_1_1p2: + vdd_a_pcie_0_1p2: + vdd_a_pcie_1_1p2: + vdd_a_ufs_0_1p2: + vdd_a_usbssdp_0_1p2: + vreg_l6b_1p2: ldo6 { + regulator-min-microvolt = <1140000>; + regulator-max-microvolt = <1260000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + /* + * Despite the fact that this is named to be 2.5V on the + * schematic, it powers eMMC which doesn't accept 2.5V + */ + vreg_l7b_2p5: ldo7 { + regulator-min-microvolt = <2960000>; + regulator-max-microvolt = <2960000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vdd_px_wcd9385: + vdd_txrx: + vddpx_0: + vddpx_3: + vddpx_7: + vreg_l18b_1p8: ldo18 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2000000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vdd_1p8: + vdd_px_sdr735: + vdd_pxm: + vdd18_io: + vddio_px_1: + vddio_px_2: + vddio_px_3: + vddpx_ts: + vddpx_wl4otp: + vreg_l19b_1p8: ldo19 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + }; + + pm8350c-regulators { + compatible = "qcom,pm8350c-rpmh-regulators"; + qcom,pmic-id = "c"; + + vdd22_wlbtpa_ch0: + vdd22_wlbtpa_ch1: + vdd22_wlbtppa_ch0: + vdd22_wlbtppa_ch1: + vdd22_wlpa5g_ch0: + vdd22_wlpa5g_ch1: + vdd22_wlppa5g_ch0: + vdd22_wlppa5g_ch1: + vreg_s1c_2p2: smps1 { + regulator-min-microvolt = <2190000>; + regulator-max-microvolt = <2210000>; + }; + + lp4_vdd2_1p052: + vreg_s9c_0p676: smps9 { + regulator-min-microvolt = <1010000>; + regulator-max-microvolt = <1170000>; + }; + + vdda_apc_cs_1p8: + vdda_gfx_cs_1p8: + vdda_turing_q6_cs_1p8: + vdd_a_cxo_1p8: + vdd_a_qrefs_1p8: + vdd_a_usbhs_1p8: + vdd_qfprom: + vreg_l1c_1p8: ldo1 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1980000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l2c_1p8: ldo2 { + regulator-min-microvolt = <1620000>; + regulator-max-microvolt = <1980000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l3c_3p0: ldo3 { + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <3540000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vddpx_5: + vreg_l4c_1p8_3p0: ldo4 { + regulator-min-microvolt = <1620000>; + regulator-max-microvolt = <3300000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vddpx_6: + vreg_l5c_1p8_3p0: ldo5 { + regulator-min-microvolt = <1620000>; + regulator-max-microvolt = <3300000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vddpx_2: + vreg_l6c_2p96: ldo6 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2950000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l7c_3p0: ldo7 { + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3544000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l8c_1p8: ldo8 { + regulator-min-microvolt = <1620000>; + regulator-max-microvolt = <2000000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l9c_2p96: ldo9 { + regulator-min-microvolt = <2960000>; + regulator-max-microvolt = <2960000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vdd_a_csi_0_1_0p9: + vdd_a_csi_2_3_0p9: + vdd_a_csi_4_0p9: + vdd_a_dsi_0_0p9: + vdd_a_dsi_0_pll_0p9: + vdd_a_edp_0_0p9: + vdd_a_gnss_0p9: + vdd_a_pcie_0_core: + vdd_a_pcie_1_core: + vdd_a_qlink_0_0p9: + vdd_a_qlink_0_0p9_ck: + vdd_a_qlink_1_0p9: + vdd_a_qlink_1_0p9_ck: + vdd_a_qrefs_0p875_0: + vdd_a_qrefs_0p875_1: + vdd_a_qrefs_0p875_2: + vdd_a_qrefs_0p875_3: + vdd_a_qrefs_0p875_4_5: + vdd_a_qrefs_0p875_6: + vdd_a_qrefs_0p875_7: + vdd_a_qrefs_0p875_8: + vdd_a_qrefs_0p875_9: + vdd_a_ufs_0_core: + vdd_a_usbhs_core: + vreg_l10c_0p88: ldo10 { + regulator-min-microvolt = <720000>; + regulator-max-microvolt = <1050000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l11c_2p8: ldo11 { + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <3544000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l12c_1p8: ldo12 { + regulator-min-microvolt = <1650000>; + regulator-max-microvolt = <2000000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l13c_3p0: ldo13 { + regulator-min-microvolt = <2700000>; + regulator-max-microvolt = <3544000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vdd_flash: + vdd_iris_rgb: + vdd_mic_bias: + vreg_bob: bob { + regulator-min-microvolt = <3008000>; + regulator-max-microvolt = <3960000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_AUTO>; + }; + }; +}; + +/* ADDITIONS TO NODES DEFINED IN PARENT DEVICE TREE FILES */ + +&ipa { + status = "okay"; + modem-init; +}; + +&pcie1_phy { + vdda-phy-supply = <&vreg_l10c_0p88>; + vdda-pll-supply = <&vreg_l6b_1p2>; +}; + +&pmk8350_vadc { + pmk8350-die-temp@3 { + reg = <PMK8350_ADC7_DIE_TEMP>; + label = "pmk8350_die_temp"; + qcom,pre-scaling = <1 1>; + }; + + pmr735a-die-temp@403 { + reg = <PMR735A_ADC7_DIE_TEMP>; + label = "pmr735a_die_temp"; + qcom,pre-scaling = <1 1>; + }; +}; + +&qfprom { + vcc-supply = <&vdd_qfprom>; +}; + +/* For eMMC. NOTE: not all Qcards have eMMC stuffed */ +&sdhc_1 { + vmmc-supply = <&vreg_l7b_2p5>; + vqmmc-supply = <&vreg_l19b_1p8>; + + non-removable; + no-sd; + no-sdio; +}; + +uart_dbg: &uart5 { + compatible = "qcom,geni-debug-uart"; + status = "okay"; +}; + +mos_bt_uart: &uart7 { + status = "okay"; + + /delete-property/ interrupts; + interrupts-extended = <&intc GIC_SPI 608 IRQ_TYPE_LEVEL_HIGH>, + <&tlmm 31 IRQ_TYPE_EDGE_FALLING>; + pinctrl-names = "default", "sleep"; + pinctrl-1 = <&qup_uart7_sleep_cts>, <&qup_uart7_sleep_rts>, <&qup_uart7_sleep_tx>, <&qup_uart7_sleep_rx>; + + bluetooth: bluetooth { + compatible = "qcom,wcn6750-bt"; + pinctrl-names = "default"; + pinctrl-0 = <&mos_bt_en>; + enable-gpios = <&tlmm 85 GPIO_ACTIVE_HIGH>; + swctrl-gpios = <&tlmm 86 GPIO_ACTIVE_HIGH>; + vddaon-supply = <&vreg_s7b_0p952>; + vddbtcxmx-supply = <&vreg_s7b_0p952>; + vddrfacmn-supply = <&vreg_s7b_0p952>; + vddrfa0p8-supply = <&vreg_s7b_0p952>; + vddrfa1p7-supply = <&vdd19_pmu_rfa_i>; + vddrfa1p2-supply = <&vdd13_pmu_rfa_i>; + vddrfa2p2-supply = <&vreg_s1c_2p2>; + vddasd-supply = <&vreg_l11c_2p8>; + vddio-supply = <&vreg_l18b_1p8>; + max-speed = <3200000>; + }; +}; + +&usb_1_hsphy { + vdda-pll-supply = <&vdd_a_usbhs_core>; + vdda33-supply = <&vdd_a_usbhs_3p1>; + vdda18-supply = <&vdd_a_usbhs_1p8>; +}; + +&usb_1_qmpphy { + vdda-phy-supply = <&vdd_a_usbssdp_0_1p2>; + vdda-pll-supply = <&vdd_a_usbssdp_0_core>; +}; + +&usb_2_hsphy { + vdda-pll-supply = <&vdd_a_usbhs_core>; + vdda33-supply = <&vdd_a_usbhs_3p1>; + vdda18-supply = <&vdd_a_usbhs_1p8>; +}; + +/* + * PINCTRL - ADDITIONS TO NODES IN PARENT DEVICE TREE FILES + * + * NOTE: In general if pins leave the Qcard then the pinctrl goes in the + * baseboard or board device tree, not here. + */ + +/* + * For ts_i2c + * + * Technically this i2c bus actually leaves the Qcard, but it leaves directly + * via the eDP connector (it doesn't hit the baseboard). The external pulls + * are on Qcard. + */ +&qup_i2c13_data_clk { + /* Has external pull */ + bias-disable; + drive-strength = <2>; +}; + +/* For mos_bt_uart */ +&qup_uart7_cts { + /* Configure a pull-down on CTS to match the pull of the Bluetooth module. */ + bias-pull-down; +}; + +/* For mos_bt_uart */ +&qup_uart7_rts { + /* We'll drive RTS, so no pull */ + bias-disable; + drive-strength = <2>; +}; + +/* For mos_bt_uart */ +&qup_uart7_tx { + /* We'll drive TX, so no pull */ + bias-disable; + drive-strength = <2>; +}; + +/* For mos_bt_uart */ +&qup_uart7_rx { + /* + * Configure a pull-up on RX. This is needed to avoid + * garbage data when the TX pin of the Bluetooth module is + * in tri-state (module powered off or not driving the + * signal yet). + */ + bias-pull-up; +}; + +/* eMMC, if stuffed, is straight on the Qcard */ +&sdc1_clk { + bias-disable; + drive-strength = <16>; +}; + +&sdc1_cmd { + bias-pull-up; + drive-strength = <10>; +}; + +&sdc1_data { + bias-pull-up; + drive-strength = <10>; +}; + +&sdc1_rclk { + bias-pull-down; +}; + +/* + * PINCTRL - QCARD + * + * This has entries that are defined by Qcard even if they go to the main + * board. In cases where the pulls may be board dependent we defer those + * settings to the board device tree. Drive strengths tend to be assinged here + * but could conceivably be overwridden by board device trees. + */ + +&pm8350c_gpios { + pmic_edp_bl_en: pmic-edp-bl-en { + pins = "gpio7"; + function = "normal"; + bias-disable; + qcom,drive-strength = <PMIC_GPIO_STRENGTH_LOW>; + + /* Force backlight to be disabled to match state at boot. */ + output-low; + }; + + pmic_edp_bl_pwm: pmic-edp-bl-pwm { + pins = "gpio8"; + function = "func1"; + bias-disable; + qcom,drive-strength = <PMIC_GPIO_STRENGTH_LOW>; + output-low; + power-source = <0>; + }; +}; + +&tlmm { + mos_bt_en: mos-bt-en { + pins = "gpio85"; + function = "gpio"; + drive-strength = <2>; + output-low; + }; + + /* For mos_bt_uart */ + qup_uart7_sleep_cts: qup-uart7-sleep-cts { + pins = "gpio28"; + function = "gpio"; + /* + * Configure a pull-down on CTS to match the pull of + * the Bluetooth module. + */ + bias-pull-down; + }; + + /* For mos_bt_uart */ + qup_uart7_sleep_rts: qup-uart7-sleep-rts { + pins = "gpio29"; + function = "gpio"; + /* + * Configure pull-down on RTS. As RTS is active low + * signal, pull it low to indicate the BT SoC that it + * can wakeup the system anytime from suspend state by + * pulling RX low (by sending wakeup bytes). + */ + bias-pull-down; + }; + + /* For mos_bt_uart */ + qup_uart7_sleep_rx: qup-uart7-sleep-rx { + pins = "gpio31"; + function = "gpio"; + /* + * Configure a pull-up on RX. This is needed to avoid + * garbage data when the TX pin of the Bluetooth module + * is floating which may cause spurious wakeups. + */ + bias-pull-up; + }; + + /* For mos_bt_uart */ + qup_uart7_sleep_tx: qup-uart7-sleep-tx { + pins = "gpio30"; + function = "gpio"; + /* + * Configure pull-up on TX when it isn't actively driven + * to prevent BT SoC from receiving garbage during sleep. + */ + bias-pull-up; + }; + + ts_int_conn: ts-int-conn { + pins = "gpio55"; + function = "gpio"; + bias-pull-up; + }; + + ts_rst_conn: ts-rst-conn { + pins = "gpio54"; + function = "gpio"; + bias-pull-up; + drive-strength = <2>; + }; +}; diff --git a/arch/arm64/boot/dts/qcom/sc7280.dtsi b/arch/arm64/boot/dts/qcom/sc7280.dtsi index 937c2e0e93eb..f0b64be63c21 100644 --- a/arch/arm64/boot/dts/qcom/sc7280.dtsi +++ b/arch/arm64/boot/dts/qcom/sc7280.dtsi @@ -4,12 +4,14 @@ * * Copyright (c) 2020-2021, The Linux Foundation. All rights reserved. */ - +#include <dt-bindings/clock/qcom,camcc-sc7280.h> #include <dt-bindings/clock/qcom,dispcc-sc7280.h> #include <dt-bindings/clock/qcom,gcc-sc7280.h> #include <dt-bindings/clock/qcom,gpucc-sc7280.h> #include <dt-bindings/clock/qcom,rpmh.h> #include <dt-bindings/clock/qcom,videocc-sc7280.h> +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/interconnect/qcom,osm-l3.h> #include <dt-bindings/interconnect/qcom,sc7280.h> #include <dt-bindings/interrupt-controller/arm-gic.h> #include <dt-bindings/mailbox/qcom-ipcc.h> @@ -162,6 +164,9 @@ &LITTLE_CPU_SLEEP_1 &CLUSTER_SLEEP_0>; next-level-cache = <&L2_0>; + operating-points-v2 = <&cpu0_opp_table>; + interconnects = <&gem_noc MASTER_APPSS_PROC 3 &mc_virt SLAVE_EBI1 3>, + <&epss_l3 MASTER_EPSS_L3_APPS &epss_l3 SLAVE_EPSS_L3_SHARED>; qcom,freq-domain = <&cpufreq_hw 0>; #cooling-cells = <2>; L2_0: l2-cache { @@ -182,6 +187,9 @@ &LITTLE_CPU_SLEEP_1 &CLUSTER_SLEEP_0>; next-level-cache = <&L2_100>; + operating-points-v2 = <&cpu0_opp_table>; + interconnects = <&gem_noc MASTER_APPSS_PROC 3 &mc_virt SLAVE_EBI1 3>, + <&epss_l3 MASTER_EPSS_L3_APPS &epss_l3 SLAVE_EPSS_L3_SHARED>; qcom,freq-domain = <&cpufreq_hw 0>; #cooling-cells = <2>; L2_100: l2-cache { @@ -199,6 +207,9 @@ &LITTLE_CPU_SLEEP_1 &CLUSTER_SLEEP_0>; next-level-cache = <&L2_200>; + operating-points-v2 = <&cpu0_opp_table>; + interconnects = <&gem_noc MASTER_APPSS_PROC 3 &mc_virt SLAVE_EBI1 3>, + <&epss_l3 MASTER_EPSS_L3_APPS &epss_l3 SLAVE_EPSS_L3_SHARED>; qcom,freq-domain = <&cpufreq_hw 0>; #cooling-cells = <2>; L2_200: l2-cache { @@ -216,6 +227,9 @@ &LITTLE_CPU_SLEEP_1 &CLUSTER_SLEEP_0>; next-level-cache = <&L2_300>; + operating-points-v2 = <&cpu0_opp_table>; + interconnects = <&gem_noc MASTER_APPSS_PROC 3 &mc_virt SLAVE_EBI1 3>, + <&epss_l3 MASTER_EPSS_L3_APPS &epss_l3 SLAVE_EPSS_L3_SHARED>; qcom,freq-domain = <&cpufreq_hw 0>; #cooling-cells = <2>; L2_300: l2-cache { @@ -233,6 +247,9 @@ &BIG_CPU_SLEEP_1 &CLUSTER_SLEEP_0>; next-level-cache = <&L2_400>; + operating-points-v2 = <&cpu4_opp_table>; + interconnects = <&gem_noc MASTER_APPSS_PROC 3 &mc_virt SLAVE_EBI1 3>, + <&epss_l3 MASTER_EPSS_L3_APPS &epss_l3 SLAVE_EPSS_L3_SHARED>; qcom,freq-domain = <&cpufreq_hw 1>; #cooling-cells = <2>; L2_400: l2-cache { @@ -250,6 +267,9 @@ &BIG_CPU_SLEEP_1 &CLUSTER_SLEEP_0>; next-level-cache = <&L2_500>; + operating-points-v2 = <&cpu4_opp_table>; + interconnects = <&gem_noc MASTER_APPSS_PROC 3 &mc_virt SLAVE_EBI1 3>, + <&epss_l3 MASTER_EPSS_L3_APPS &epss_l3 SLAVE_EPSS_L3_SHARED>; qcom,freq-domain = <&cpufreq_hw 1>; #cooling-cells = <2>; L2_500: l2-cache { @@ -267,6 +287,9 @@ &BIG_CPU_SLEEP_1 &CLUSTER_SLEEP_0>; next-level-cache = <&L2_600>; + operating-points-v2 = <&cpu4_opp_table>; + interconnects = <&gem_noc MASTER_APPSS_PROC 3 &mc_virt SLAVE_EBI1 3>, + <&epss_l3 MASTER_EPSS_L3_APPS &epss_l3 SLAVE_EPSS_L3_SHARED>; qcom,freq-domain = <&cpufreq_hw 1>; #cooling-cells = <2>; L2_600: l2-cache { @@ -284,6 +307,9 @@ &BIG_CPU_SLEEP_1 &CLUSTER_SLEEP_0>; next-level-cache = <&L2_700>; + operating-points-v2 = <&cpu7_opp_table>; + interconnects = <&gem_noc MASTER_APPSS_PROC 3 &mc_virt SLAVE_EBI1 3>, + <&epss_l3 MASTER_EPSS_L3_APPS &epss_l3 SLAVE_EPSS_L3_SHARED>; qcom,freq-domain = <&cpufreq_hw 2>; #cooling-cells = <2>; L2_700: l2-cache { @@ -383,6 +409,211 @@ }; }; + cpu0_opp_table: cpu0-opp-table { + compatible = "operating-points-v2"; + opp-shared; + + cpu0_opp_300mhz: opp-300000000 { + opp-hz = /bits/ 64 <300000000>; + opp-peak-kBps = <800000 9600000>; + }; + + cpu0_opp_691mhz: opp-691200000 { + opp-hz = /bits/ 64 <691200000>; + opp-peak-kBps = <800000 17817600>; + }; + + cpu0_opp_806mhz: opp-806400000 { + opp-hz = /bits/ 64 <806400000>; + opp-peak-kBps = <800000 20889600>; + }; + + cpu0_opp_941mhz: opp-940800000 { + opp-hz = /bits/ 64 <940800000>; + opp-peak-kBps = <1804000 24576000>; + }; + + cpu0_opp_1152mhz: opp-1152000000 { + opp-hz = /bits/ 64 <1152000000>; + opp-peak-kBps = <2188000 27033600>; + }; + + cpu0_opp_1325mhz: opp-1324800000 { + opp-hz = /bits/ 64 <1324800000>; + opp-peak-kBps = <2188000 33792000>; + }; + + cpu0_opp_1517mhz: opp-1516800000 { + opp-hz = /bits/ 64 <1516800000>; + opp-peak-kBps = <3072000 38092800>; + }; + + cpu0_opp_1651mhz: opp-1651200000 { + opp-hz = /bits/ 64 <1651200000>; + opp-peak-kBps = <3072000 41779200>; + }; + + cpu0_opp_1805mhz: opp-1804800000 { + opp-hz = /bits/ 64 <1804800000>; + opp-peak-kBps = <4068000 48537600>; + }; + + cpu0_opp_1958mhz: opp-1958400000 { + opp-hz = /bits/ 64 <1958400000>; + opp-peak-kBps = <4068000 48537600>; + }; + + cpu0_opp_2016mhz: opp-2016000000 { + opp-hz = /bits/ 64 <2016000000>; + opp-peak-kBps = <6220000 48537600>; + }; + }; + + cpu4_opp_table: cpu4-opp-table { + compatible = "operating-points-v2"; + opp-shared; + + cpu4_opp_691mhz: opp-691200000 { + opp-hz = /bits/ 64 <691200000>; + opp-peak-kBps = <1804000 9600000>; + }; + + cpu4_opp_941mhz: opp-940800000 { + opp-hz = /bits/ 64 <940800000>; + opp-peak-kBps = <2188000 17817600>; + }; + + cpu4_opp_1229mhz: opp-1228800000 { + opp-hz = /bits/ 64 <1228800000>; + opp-peak-kBps = <4068000 24576000>; + }; + + cpu4_opp_1344mhz: opp-1344000000 { + opp-hz = /bits/ 64 <1344000000>; + opp-peak-kBps = <4068000 24576000>; + }; + + cpu4_opp_1517mhz: opp-1516800000 { + opp-hz = /bits/ 64 <1516800000>; + opp-peak-kBps = <4068000 24576000>; + }; + + cpu4_opp_1651mhz: opp-1651200000 { + opp-hz = /bits/ 64 <1651200000>; + opp-peak-kBps = <6220000 38092800>; + }; + + cpu4_opp_1901mhz: opp-1900800000 { + opp-hz = /bits/ 64 <1900800000>; + opp-peak-kBps = <6220000 44851200>; + }; + + cpu4_opp_2054mhz: opp-2054400000 { + opp-hz = /bits/ 64 <2054400000>; + opp-peak-kBps = <6220000 44851200>; + }; + + cpu4_opp_2112mhz: opp-2112000000 { + opp-hz = /bits/ 64 <2112000000>; + opp-peak-kBps = <6220000 44851200>; + }; + + cpu4_opp_2131mhz: opp-2131200000 { + opp-hz = /bits/ 64 <2131200000>; + opp-peak-kBps = <6220000 44851200>; + }; + + cpu4_opp_2208mhz: opp-2208000000 { + opp-hz = /bits/ 64 <2208000000>; + opp-peak-kBps = <6220000 44851200>; + }; + + cpu4_opp_2400mhz: opp-2400000000 { + opp-hz = /bits/ 64 <2400000000>; + opp-peak-kBps = <8532000 48537600>; + }; + + cpu4_opp_2611mhz: opp-2611200000 { + opp-hz = /bits/ 64 <2611200000>; + opp-peak-kBps = <8532000 48537600>; + }; + }; + + cpu7_opp_table: cpu7-opp-table { + compatible = "operating-points-v2"; + opp-shared; + + cpu7_opp_806mhz: opp-806400000 { + opp-hz = /bits/ 64 <806400000>; + opp-peak-kBps = <1804000 9600000>; + }; + + cpu7_opp_1056mhz: opp-1056000000 { + opp-hz = /bits/ 64 <1056000000>; + opp-peak-kBps = <2188000 17817600>; + }; + + cpu7_opp_1325mhz: opp-1324800000 { + opp-hz = /bits/ 64 <1324800000>; + opp-peak-kBps = <4068000 24576000>; + }; + + cpu7_opp_1517mhz: opp-1516800000 { + opp-hz = /bits/ 64 <1516800000>; + opp-peak-kBps = <4068000 24576000>; + }; + + cpu7_opp_1766mhz: opp-1766400000 { + opp-hz = /bits/ 64 <1766400000>; + opp-peak-kBps = <6220000 38092800>; + }; + + cpu7_opp_1862mhz: opp-1862400000 { + opp-hz = /bits/ 64 <1862400000>; + opp-peak-kBps = <6220000 38092800>; + }; + + cpu7_opp_2035mhz: opp-2035200000 { + opp-hz = /bits/ 64 <2035200000>; + opp-peak-kBps = <6220000 38092800>; + }; + + cpu7_opp_2112mhz: opp-2112000000 { + opp-hz = /bits/ 64 <2112000000>; + opp-peak-kBps = <6220000 44851200>; + }; + + cpu7_opp_2208mhz: opp-2208000000 { + opp-hz = /bits/ 64 <2208000000>; + opp-peak-kBps = <6220000 44851200>; + }; + + cpu7_opp_2381mhz: opp-2380800000 { + opp-hz = /bits/ 64 <2380800000>; + opp-peak-kBps = <6832000 44851200>; + }; + + cpu7_opp_2400mhz: opp-2400000000 { + opp-hz = /bits/ 64 <2400000000>; + opp-peak-kBps = <8532000 48537600>; + }; + + cpu7_opp_2515mhz: opp-2515200000 { + opp-hz = /bits/ 64 <2515200000>; + opp-peak-kBps = <8532000 48537600>; + }; + + cpu7_opp_2707mhz: opp-2707200000 { + opp-hz = /bits/ 64 <2707200000>; + opp-peak-kBps = <8532000 48537600>; + }; + + cpu7_opp_3014mhz: opp-3014400000 { + opp-hz = /bits/ 64 <3014400000>; + opp-peak-kBps = <8532000 48537600>; + }; + }; + memory@80000000 { device_type = "memory"; /* We expect the bootloader to fill in the size */ @@ -615,6 +846,9 @@ sdhc_1: sdhci@7c4000 { compatible = "qcom,sc7280-sdhci", "qcom,sdhci-msm-v5"; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&sdc1_clk>, <&sdc1_cmd>, <&sdc1_data>, <&sdc1_rclk>; + pinctrl-1 = <&sdc1_clk_sleep>, <&sdc1_cmd_sleep>, <&sdc1_data_sleep>, <&sdc1_rclk_sleep>; status = "disabled"; reg = <0 0x007c4000 0 0x1000>, @@ -1714,6 +1948,8 @@ interconnect-names = "memory", "config"; + qcom,qmp = <&aoss_qmp>; + qcom,smem-states = <&ipa_smp2p_out 0>, <&ipa_smp2p_out 1>; qcom,smem-state-names = "ipa-clock-enabled-valid", @@ -1790,7 +2026,7 @@ }; }; - gmu: gmu@3d69000 { + gmu: gmu@3d6a000 { compatible="qcom,adreno-gmu-635.0", "qcom,adreno-gmu"; reg = <0 0x03d6a000 0 0x34000>, <0 0x3de0000 0 0x10000>, @@ -2424,6 +2660,9 @@ sdhc_2: sdhci@8804000 { compatible = "qcom,sc7280-sdhci", "qcom,sdhci-msm-v5"; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&sdc2_clk>, <&sdc2_cmd>, <&sdc2_data>; + pinctrl-1 = <&sdc2_clk_sleep>, <&sdc2_cmd_sleep>, <&sdc2_data_sleep>; status = "disabled"; reg = <0 0x08804000 0 0x1000>; @@ -2761,13 +3000,31 @@ #power-domain-cells = <1>; }; + camcc: clock-controller@ad00000 { + compatible = "qcom,sc7280-camcc"; + reg = <0 0x0ad00000 0 0x10000>; + clocks = <&rpmhcc RPMH_CXO_CLK>, + <&rpmhcc RPMH_CXO_CLK_A>, + <&sleep_clk>; + clock-names = "bi_tcxo", "bi_tcxo_ao", "sleep_clk"; + #clock-cells = <1>; + #reset-cells = <1>; + #power-domain-cells = <1>; + }; + dispcc: clock-controller@af00000 { compatible = "qcom,sc7280-dispcc"; reg = <0 0xaf00000 0 0x20000>; clocks = <&rpmhcc RPMH_CXO_CLK>, <&gcc GCC_DISP_GPLL0_CLK_SRC>, - <0>, <0>, <0>, <0>, <0>, <0>; - clock-names = "bi_tcxo", "gcc_disp_gpll0_clk", + <&mdss_dsi_phy 0>, + <&mdss_dsi_phy 1>, + <&dp_phy 0>, + <&dp_phy 1>, + <&mdss_edp_phy 0>, + <&mdss_edp_phy 1>; + clock-names = "bi_tcxo", + "gcc_disp_gpll0_clk", "dsi0_phy_pll_out_byteclk", "dsi0_phy_pll_out_dsiclk", "dp_phy_pll_link_clk", @@ -2779,6 +3036,389 @@ #power-domain-cells = <1>; }; + mdss: display-subsystem@ae00000 { + compatible = "qcom,sc7280-mdss"; + reg = <0 0x0ae00000 0 0x1000>; + reg-names = "mdss"; + + power-domains = <&dispcc DISP_CC_MDSS_CORE_GDSC>; + + clocks = <&gcc GCC_DISP_AHB_CLK>, + <&dispcc DISP_CC_MDSS_AHB_CLK>, + <&dispcc DISP_CC_MDSS_MDP_CLK>; + clock-names = "iface", + "ahb", + "core"; + + assigned-clocks = <&dispcc DISP_CC_MDSS_MDP_CLK>; + assigned-clock-rates = <300000000>; + + interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>; + interrupt-controller; + #interrupt-cells = <1>; + + interconnects = <&mmss_noc MASTER_MDP0 0 &mc_virt SLAVE_EBI1 0>; + interconnect-names = "mdp0-mem"; + + iommus = <&apps_smmu 0x900 0x402>; + + #address-cells = <2>; + #size-cells = <2>; + ranges; + + status = "disabled"; + + mdss_mdp: display-controller@ae01000 { + compatible = "qcom,sc7280-dpu"; + reg = <0 0x0ae01000 0 0x8f030>, + <0 0x0aeb0000 0 0x2008>; + reg-names = "mdp", "vbif"; + + clocks = <&gcc GCC_DISP_HF_AXI_CLK>, + <&gcc GCC_DISP_SF_AXI_CLK>, + <&dispcc DISP_CC_MDSS_AHB_CLK>, + <&dispcc DISP_CC_MDSS_MDP_LUT_CLK>, + <&dispcc DISP_CC_MDSS_MDP_CLK>, + <&dispcc DISP_CC_MDSS_VSYNC_CLK>; + clock-names = "bus", + "nrt_bus", + "iface", + "lut", + "core", + "vsync"; + assigned-clocks = <&dispcc DISP_CC_MDSS_MDP_CLK>, + <&dispcc DISP_CC_MDSS_VSYNC_CLK>, + <&dispcc DISP_CC_MDSS_AHB_CLK>; + assigned-clock-rates = <300000000>, + <19200000>, + <19200000>; + operating-points-v2 = <&mdp_opp_table>; + power-domains = <&rpmhpd SC7280_CX>; + + interrupt-parent = <&mdss>; + interrupts = <0>; + + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + dpu_intf1_out: endpoint { + remote-endpoint = <&dsi0_in>; + }; + }; + + port@1 { + reg = <1>; + dpu_intf5_out: endpoint { + remote-endpoint = <&edp_in>; + }; + }; + + port@2 { + reg = <2>; + dpu_intf0_out: endpoint { + remote-endpoint = <&dp_in>; + }; + }; + }; + + mdp_opp_table: opp-table { + compatible = "operating-points-v2"; + + opp-200000000 { + opp-hz = /bits/ 64 <200000000>; + required-opps = <&rpmhpd_opp_low_svs>; + }; + + opp-300000000 { + opp-hz = /bits/ 64 <300000000>; + required-opps = <&rpmhpd_opp_svs>; + }; + + opp-380000000 { + opp-hz = /bits/ 64 <380000000>; + required-opps = <&rpmhpd_opp_svs_l1>; + }; + + opp-506666667 { + opp-hz = /bits/ 64 <506666667>; + required-opps = <&rpmhpd_opp_nom>; + }; + }; + }; + + mdss_dsi: dsi@ae94000 { + compatible = "qcom,mdss-dsi-ctrl"; + reg = <0 0x0ae94000 0 0x400>; + reg-names = "dsi_ctrl"; + + interrupt-parent = <&mdss>; + interrupts = <4>; + + clocks = <&dispcc DISP_CC_MDSS_BYTE0_CLK>, + <&dispcc DISP_CC_MDSS_BYTE0_INTF_CLK>, + <&dispcc DISP_CC_MDSS_PCLK0_CLK>, + <&dispcc DISP_CC_MDSS_ESC0_CLK>, + <&dispcc DISP_CC_MDSS_AHB_CLK>, + <&gcc GCC_DISP_HF_AXI_CLK>; + clock-names = "byte", + "byte_intf", + "pixel", + "core", + "iface", + "bus"; + + operating-points-v2 = <&dsi_opp_table>; + power-domains = <&rpmhpd SC7280_CX>; + + phys = <&mdss_dsi_phy>; + phy-names = "dsi"; + + #address-cells = <1>; + #size-cells = <0>; + + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + dsi0_in: endpoint { + remote-endpoint = <&dpu_intf1_out>; + }; + }; + + port@1 { + reg = <1>; + dsi0_out: endpoint { + }; + }; + }; + + dsi_opp_table: opp-table { + compatible = "operating-points-v2"; + + opp-187500000 { + opp-hz = /bits/ 64 <187500000>; + required-opps = <&rpmhpd_opp_low_svs>; + }; + + opp-300000000 { + opp-hz = /bits/ 64 <300000000>; + required-opps = <&rpmhpd_opp_svs>; + }; + + opp-358000000 { + opp-hz = /bits/ 64 <358000000>; + required-opps = <&rpmhpd_opp_svs_l1>; + }; + }; + }; + + mdss_dsi_phy: phy@ae94400 { + compatible = "qcom,sc7280-dsi-phy-7nm"; + reg = <0 0x0ae94400 0 0x200>, + <0 0x0ae94600 0 0x280>, + <0 0x0ae94900 0 0x280>; + reg-names = "dsi_phy", + "dsi_phy_lane", + "dsi_pll"; + + #clock-cells = <1>; + #phy-cells = <0>; + + clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>, + <&rpmhcc RPMH_CXO_CLK>; + clock-names = "iface", "ref"; + + status = "disabled"; + }; + + mdss_edp: edp@aea0000 { + compatible = "qcom,sc7280-edp"; + pinctrl-names = "default"; + pinctrl-0 = <&edp_hot_plug_det>; + + reg = <0 0xaea0000 0 0x200>, + <0 0xaea0200 0 0x200>, + <0 0xaea0400 0 0xc00>, + <0 0xaea1000 0 0x400>; + + interrupt-parent = <&mdss>; + interrupts = <14>; + + clocks = <&rpmhcc RPMH_CXO_CLK>, + <&gcc GCC_EDP_CLKREF_EN>, + <&dispcc DISP_CC_MDSS_AHB_CLK>, + <&dispcc DISP_CC_MDSS_EDP_AUX_CLK>, + <&dispcc DISP_CC_MDSS_EDP_LINK_CLK>, + <&dispcc DISP_CC_MDSS_EDP_LINK_INTF_CLK>, + <&dispcc DISP_CC_MDSS_EDP_PIXEL_CLK>; + clock-names = "core_xo", + "core_ref", + "core_iface", + "core_aux", + "ctrl_link", + "ctrl_link_iface", + "stream_pixel"; + #clock-cells = <1>; + assigned-clocks = <&dispcc DISP_CC_MDSS_EDP_LINK_CLK_SRC>, + <&dispcc DISP_CC_MDSS_EDP_PIXEL_CLK_SRC>; + assigned-clock-parents = <&mdss_edp_phy 0>, <&mdss_edp_phy 1>; + + phys = <&mdss_edp_phy>; + phy-names = "dp"; + + operating-points-v2 = <&edp_opp_table>; + power-domains = <&rpmhpd SC7280_CX>; + + #address-cells = <1>; + #size-cells = <0>; + + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + edp_in: endpoint { + remote-endpoint = <&dpu_intf5_out>; + }; + }; + + port@1 { + reg = <1>; + edp_out: endpoint { }; + }; + }; + + edp_opp_table: opp-table { + compatible = "operating-points-v2"; + + opp-160000000 { + opp-hz = /bits/ 64 <160000000>; + required-opps = <&rpmhpd_opp_low_svs>; + }; + + opp-270000000 { + opp-hz = /bits/ 64 <270000000>; + required-opps = <&rpmhpd_opp_svs>; + }; + + opp-540000000 { + opp-hz = /bits/ 64 <540000000>; + required-opps = <&rpmhpd_opp_nom>; + }; + + opp-810000000 { + opp-hz = /bits/ 64 <810000000>; + required-opps = <&rpmhpd_opp_nom>; + }; + }; + }; + + mdss_edp_phy: phy@aec2a00 { + compatible = "qcom,sc7280-edp-phy"; + + reg = <0 0xaec2a00 0 0x19c>, + <0 0xaec2200 0 0xa0>, + <0 0xaec2600 0 0xa0>, + <0 0xaec2000 0 0x1c0>; + + clocks = <&rpmhcc RPMH_CXO_CLK>, + <&gcc GCC_EDP_CLKREF_EN>; + clock-names = "aux", + "cfg_ahb"; + + #clock-cells = <1>; + #phy-cells = <0>; + + status = "disabled"; + }; + + mdss_dp: displayport-controller@ae90000 { + compatible = "qcom,sc7280-dp"; + + reg = <0 0x0ae90000 0 0x1400>; + + interrupt-parent = <&mdss>; + interrupts = <12>; + + clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>, + <&dispcc DISP_CC_MDSS_DP_AUX_CLK>, + <&dispcc DISP_CC_MDSS_DP_LINK_CLK>, + <&dispcc DISP_CC_MDSS_DP_LINK_INTF_CLK>, + <&dispcc DISP_CC_MDSS_DP_PIXEL_CLK>; + clock-names = "core_iface", + "core_aux", + "ctrl_link", + "ctrl_link_iface", + "stream_pixel"; + #clock-cells = <1>; + assigned-clocks = <&dispcc DISP_CC_MDSS_DP_LINK_CLK_SRC>, + <&dispcc DISP_CC_MDSS_DP_PIXEL_CLK_SRC>; + assigned-clock-parents = <&dp_phy 0>, <&dp_phy 1>; + phys = <&dp_phy>; + phy-names = "dp"; + + operating-points-v2 = <&dp_opp_table>; + power-domains = <&rpmhpd SC7280_CX>; + + #sound-dai-cells = <0>; + + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + dp_in: endpoint { + remote-endpoint = <&dpu_intf0_out>; + }; + }; + + port@1 { + reg = <1>; + dp_out: endpoint { }; + }; + }; + + dp_opp_table: opp-table { + compatible = "operating-points-v2"; + + opp-160000000 { + opp-hz = /bits/ 64 <160000000>; + required-opps = <&rpmhpd_opp_low_svs>; + }; + + opp-270000000 { + opp-hz = /bits/ 64 <270000000>; + required-opps = <&rpmhpd_opp_svs>; + }; + + opp-540000000 { + opp-hz = /bits/ 64 <540000000>; + required-opps = <&rpmhpd_opp_svs_l1>; + }; + + opp-810000000 { + opp-hz = /bits/ 64 <810000000>; + required-opps = <&rpmhpd_opp_nom>; + }; + }; + }; + }; + pdc: interrupt-controller@b220000 { compatible = "qcom,sc7280-pdc", "qcom,pdc"; reg = <0 0x0b220000 0 0x30000>; @@ -2872,11 +3512,19 @@ gpio-ranges = <&tlmm 0 0 175>; wakeup-parent = <&pdc>; + dp_hot_plug_det: dp-hot-plug-det { + pins = "gpio47"; + function = "dp_hot"; + }; + + edp_hot_plug_det: edp-hot-plug-det { + pins = "gpio60"; + function = "edp_hot"; + }; + pcie1_clkreq_n: pcie1-clkreq-n { pins = "gpio79"; function = "pcie1_clkreqn"; - drive-strength = <2>; - bias-pull-up; }; qspi_clk: qspi-clk { @@ -3384,83 +4032,6 @@ function = "qup07"; }; - sdc1_on: sdc1-on { - clk { - pins = "sdc1_clk"; - }; - - cmd { - pins = "sdc1_cmd"; - }; - - data { - pins = "sdc1_data"; - }; - - rclk { - pins = "sdc1_rclk"; - }; - }; - - sdc1_off: sdc1-off { - clk { - pins = "sdc1_clk"; - drive-strength = <2>; - bias-bus-hold; - }; - - cmd { - pins = "sdc1_cmd"; - drive-strength = <2>; - bias-bus-hold; - }; - - data { - pins = "sdc1_data"; - drive-strength = <2>; - bias-bus-hold; - }; - - rclk { - pins = "sdc1_rclk"; - bias-bus-hold; - }; - }; - - sdc2_on: sdc2-on { - clk { - pins = "sdc2_clk"; - }; - - cmd { - pins = "sdc2_cmd"; - }; - - data { - pins = "sdc2_data"; - }; - }; - - sdc2_off: sdc2-off { - clk { - pins = "sdc2_clk"; - drive-strength = <2>; - bias-bus-hold; - }; - - cmd { - pins ="sdc2_cmd"; - drive-strength = <2>; - bias-bus-hold; - }; - - data { - pins ="sdc2_data"; - drive-strength = <2>; - bias-bus-hold; - }; - }; - qup_uart8_cts: qup-uart8-cts { pins = "gpio32"; function = "qup10"; @@ -3620,6 +4191,76 @@ pins = "gpio63"; function = "qup17"; }; + + sdc1_clk: sdc1-clk { + pins = "sdc1_clk"; + }; + + sdc1_cmd: sdc1-cmd { + pins = "sdc1_cmd"; + }; + + sdc1_data: sdc1-data { + pins = "sdc1_data"; + }; + + sdc1_rclk: sdc1-rclk { + pins = "sdc1_rclk"; + }; + + sdc1_clk_sleep: sdc1-clk-sleep { + pins = "sdc1_clk"; + drive-strength = <2>; + bias-bus-hold; + }; + + sdc1_cmd_sleep: sdc1-cmd-sleep { + pins = "sdc1_cmd"; + drive-strength = <2>; + bias-bus-hold; + }; + + sdc1_data_sleep: sdc1-data-sleep { + pins = "sdc1_data"; + drive-strength = <2>; + bias-bus-hold; + }; + + sdc1_rclk_sleep: sdc1-rclk-sleep { + pins = "sdc1_rclk"; + drive-strength = <2>; + bias-bus-hold; + }; + + sdc2_clk: sdc2-clk { + pins = "sdc2_clk"; + }; + + sdc2_cmd: sdc2-cmd { + pins = "sdc2_cmd"; + }; + + sdc2_data: sdc2-data { + pins = "sdc2_data"; + }; + + sdc2_clk_sleep: sdc2-clk-sleep { + pins = "sdc2_clk"; + drive-strength = <2>; + bias-bus-hold; + }; + + sdc2_cmd_sleep: sdc2-cmd-sleep { + pins = "sdc2_cmd"; + drive-strength = <2>; + bias-bus-hold; + }; + + sdc2_data_sleep: sdc2-data-sleep { + pins = "sdc2_data"; + drive-strength = <2>; + bias-bus-hold; + }; }; imem@146a5000 { @@ -3885,6 +4526,14 @@ }; }; + epss_l3: interconnect@18590000 { + compatible = "qcom,sc7280-epss-l3"; + reg = <0 0x18590000 0 0x1000>; + clocks = <&rpmhcc RPMH_CXO_CLK>, <&gcc GCC_GPLL0>; + clock-names = "xo", "alternate"; + #interconnect-cells = <1>; + }; + cpufreq_hw: cpufreq@18591000 { compatible = "qcom,cpufreq-epss"; reg = <0 0x18591000 0 0x1000>, diff --git a/arch/arm64/boot/dts/qcom/sdm630.dtsi b/arch/arm64/boot/dts/qcom/sdm630.dtsi index 9217c3a51f79..240293592ef9 100644 --- a/arch/arm64/boot/dts/qcom/sdm630.dtsi +++ b/arch/arm64/boot/dts/qcom/sdm630.dtsi @@ -2160,7 +2160,7 @@ apr { compatible = "qcom,apr-v2"; qcom,glink-channels = "apr_audio_svc"; - qcom,apr-domain = <APR_DOMAIN_ADSP>; + qcom,domain = <APR_DOMAIN_ADSP>; #address-cells = <1>; #size-cells = <0>; diff --git a/arch/arm64/boot/dts/qcom/sdm632-fairphone-fp3.dts b/arch/arm64/boot/dts/qcom/sdm632-fairphone-fp3.dts new file mode 100644 index 000000000000..8b815b2a60a7 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/sdm632-fairphone-fp3.dts @@ -0,0 +1,183 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * Copyright (c) 2022, Luca Weiss <luca@z3ntu.xyz> + */ +/dts-v1/; + +#include "sdm632.dtsi" +#include "pm8953.dtsi" + +/ { + model = "Fairphone 3"; + compatible = "fairphone,fp3", "qcom,sdm632"; + chassis-type = "handset"; + qcom,msm-id = <349 0>; + qcom,board-id = <8 0x10000>; + + aliases { + mmc0 = &sdhc_1; + mmc1 = &sdhc_2; + serial0 = &uart_0; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + gpio-keys { + compatible = "gpio-keys"; + + volume-up { + label = "volume_up"; + linux,code = <KEY_VOLUMEUP>; + gpios = <&tlmm 85 GPIO_ACTIVE_LOW>; + }; + }; + + vph_pwr: vph-pwr-regulator { + compatible = "regulator-fixed"; + regulator-name = "vph_pwr"; + regulator-always-on; + regulator-boot-on; + }; +}; + +&hsusb_phy { + status = "okay"; + vdd-supply = <&pm8953_l3>; + vdda-pll-supply = <&pm8953_l7>; + vdda-phy-dpdm-supply = <&pm8953_l13>; +}; + +&pm8953_resin { + status = "okay"; + linux,code = <KEY_VOLUMEDOWN>; +}; + +&sdhc_1 { + status = "okay"; + vmmc-supply = <&pm8953_l8>; + vqmmc-supply = <&pm8953_l5>; +}; + +&sdhc_2 { + status = "okay"; + vmmc-supply = <&pm8953_l11>; + vqmmc-supply = <&pm8953_l12>; + + cd-gpios = <&tlmm 133 GPIO_ACTIVE_LOW>; +}; + +&rpm_requests { + pm8953-regulators { + compatible = "qcom,rpm-pm8953-regulators"; + + vdd_l1-supply = <&pm8953_s3>; + vdd_l2_l3-supply = <&pm8953_s3>; + vdd_l4_l5_l6_l7_l16_l19-supply = <&pm8953_s4>; + vdd_l8_l11_l12_l13_l14_l15-supply = <&vph_pwr>; + vdd_l9_l10_l17_l18_l22-supply = <&vph_pwr>; + + pm8953_s3: s3 { + regulator-min-microvolt = <984000>; + regulator-max-microvolt = <1240000>; + }; + pm8953_s4: s4 { + regulator-min-microvolt = <1036000>; + regulator-max-microvolt = <2040000>; + }; + pm8953_s5: s5 { + regulator-min-microvolt = <1036000>; + regulator-max-microvolt = <2040000>; + }; + + pm8953_l1: l1 { + regulator-min-microvolt = <975000>; + regulator-max-microvolt = <1050000>; + }; + pm8953_l2: l2 { + regulator-min-microvolt = <975000>; + regulator-max-microvolt = <1175000>; + }; + pm8953_l3: l3 { + regulator-min-microvolt = <925000>; + regulator-max-microvolt = <925000>; + }; + pm8953_l5: l5 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + pm8953_l6: l6 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + pm8953_l7: l7 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1900000>; + }; + pm8953_l8: l8 { + regulator-min-microvolt = <2900000>; + regulator-max-microvolt = <2900000>; + }; + pm8953_l9: l9 { + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3300000>; + }; + pm8953_l10: l10 { + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <3000000>; + }; + pm8953_l11: l11 { + regulator-min-microvolt = <2950000>; + regulator-max-microvolt = <2950000>; + }; + pm8953_l12: l12 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2950000>; + }; + pm8953_l13: l13 { + regulator-min-microvolt = <3125000>; + regulator-max-microvolt = <3125000>; + }; + pm8953_l16: l16 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + pm8953_l17: l17 { + regulator-min-microvolt = <2850000>; + regulator-max-microvolt = <2850000>; + }; + pm8953_l19: l19 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1350000>; + }; + pm8953_l22: l22 { + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + }; + pm8953_l23: l23 { + regulator-min-microvolt = <975000>; + regulator-max-microvolt = <1225000>; + }; + }; +}; + +&tlmm { + /* + * 0-3: unused but protected by TZ + * 135-138: fingerprint reader (SPI) + */ + gpio-reserved-ranges = <0 4>, <135 4>; +}; + +&uart_0 { + status = "okay"; +}; + +&usb3 { + status = "okay"; +}; + +&usb3_dwc3 { + dr_mode = "peripheral"; +}; diff --git a/arch/arm64/boot/dts/qcom/sdm632.dtsi b/arch/arm64/boot/dts/qcom/sdm632.dtsi new file mode 100644 index 000000000000..645b9f6a801f --- /dev/null +++ b/arch/arm64/boot/dts/qcom/sdm632.dtsi @@ -0,0 +1,81 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* Copyright (c) 2022, The Linux Foundation. All rights reserved. */ + +#include "msm8953.dtsi" + +/ { + thermal-zones { + /delete-node/cpu1-thermal; + /delete-node/cpu2-thermal; + /delete-node/cpu3-thermal; + + cpu0-thermal { + thermal-sensors = <&tsens0 13>; + + cooling-maps { + map0 { + cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; + }; + + cpu4-thermal { + thermal-sensors = <&tsens0 5>; + }; + + cpu5-thermal { + thermal-sensors = <&tsens0 6>; + }; + + cpu6-thermal { + thermal-sensors = <&tsens0 7>; + }; + + cpu7-thermal { + thermal-sensors = <&tsens0 8>; + }; + }; +}; + +/* + * SDM632 uses Kryo 250 instead of Cortex A53 + * CPU0-3 are efficiency cores, CPU4-7 are performance cores + */ +&CPU0 { + compatible = "qcom,kryo250"; +}; + +&CPU1 { + compatible = "qcom,kryo250"; +}; + +&CPU2 { + compatible = "qcom,kryo250"; +}; + +&CPU3 { + compatible = "qcom,kryo250"; +}; + +&CPU4 { + compatible = "qcom,kryo250"; + capacity-dmips-mhz = <1980>; +}; + +&CPU5 { + compatible = "qcom,kryo250"; + capacity-dmips-mhz = <1980>; +}; + +&CPU6 { + compatible = "qcom,kryo250"; + capacity-dmips-mhz = <1980>; +}; + +&CPU7 { + compatible = "qcom,kryo250"; + capacity-dmips-mhz = <1980>; +}; diff --git a/arch/arm64/boot/dts/qcom/sdm845-cheza.dtsi b/arch/arm64/boot/dts/qcom/sdm845-cheza.dtsi index 4a6285a25f77..e7e4cc5936aa 100644 --- a/arch/arm64/boot/dts/qcom/sdm845-cheza.dtsi +++ b/arch/arm64/boot/dts/qcom/sdm845-cheza.dtsi @@ -708,7 +708,7 @@ ap_ts_i2c: &i2c14 { pinctrl-0 = <&ec_ap_int_l>; spi-max-frequency = <3000000>; - cros_ec_pwm: ec-pwm { + cros_ec_pwm: pwm { compatible = "google,cros-ec-pwm"; #pwm-cells = <1>; }; diff --git a/arch/arm64/boot/dts/qcom/sdm845-db845c.dts b/arch/arm64/boot/dts/qcom/sdm845-db845c.dts index 13f80a0b6faa..28fe45c5d516 100644 --- a/arch/arm64/boot/dts/qcom/sdm845-db845c.dts +++ b/arch/arm64/boot/dts/qcom/sdm845-db845c.dts @@ -425,6 +425,10 @@ status = "okay"; }; +&gpi_dma0 { + status = "okay"; +}; + &gpu { status = "okay"; zap-shader { @@ -1125,7 +1129,6 @@ port@0 { reg = <0>; csiphy0_ep: endpoint { - clock-lanes = <7>; data-lanes = <0 1 2 3>; remote-endpoint = <&ov8856_ep>; }; @@ -1166,7 +1169,6 @@ port { ov8856_ep: endpoint { - clock-lanes = <1>; link-frequencies = /bits/ 64 <360000000 180000000>; data-lanes = <1 2 3 4>; @@ -1211,7 +1213,6 @@ port { ov7251_ep: endpoint { - clock-lanes = <1>; data-lanes = <0 1>; // remote-endpoint = <&csiphy3_ep>; }; diff --git a/arch/arm64/boot/dts/qcom/sdm845-oneplus-common.dtsi b/arch/arm64/boot/dts/qcom/sdm845-oneplus-common.dtsi index 7f42e5315ecb..1084d5ce9ac7 100644 --- a/arch/arm64/boot/dts/qcom/sdm845-oneplus-common.dtsi +++ b/arch/arm64/boot/dts/qcom/sdm845-oneplus-common.dtsi @@ -54,7 +54,7 @@ * it is otherwise possible for an allocation adjacent to the * rmtfs_mem region to trigger an XPU violation, causing a crash. */ - rmtfs_lower_guard: memory@f5b00000 { + rmtfs_lower_guard: rmtfs-lower-guard@f5b00000 { no-map; reg = <0 0xf5b00000 0 0x1000>; }; @@ -63,7 +63,7 @@ * but given the same address every time. Hard code it as this address is * where the modem firmware expects it to be. */ - rmtfs_mem: memory@f5b01000 { + rmtfs_mem: rmtfs-mem@f5b01000 { compatible = "qcom,rmtfs-mem"; reg = <0 0xf5b01000 0 0x200000>; no-map; @@ -71,7 +71,7 @@ qcom,client-id = <1>; qcom,vmid = <15>; }; - rmtfs_upper_guard: memory@f5d01000 { + rmtfs_upper_guard: rmtfs-upper-guard@f5d01000 { no-map; reg = <0 0xf5d01000 0 0x1000>; }; @@ -80,7 +80,7 @@ * It seems like reserving the old rmtfs_mem region is also needed to prevent * random crashes which are most likely modem related, more testing needed. */ - removed_region: memory@88f00000 { + removed_region: removed-region@88f00000 { no-map; reg = <0 0x88f00000 0 0x1c00000>; }; @@ -376,6 +376,17 @@ }; }; +&i2c10 { + status = "okay"; + clock-frequency = <100000>; + + bq27441_fg: bq27441-battery@55 { + compatible = "ti,bq27411"; + status = "okay"; + reg = <0x55>; + }; +}; + &i2c12 { status = "okay"; clock-frequency = <400000>; diff --git a/arch/arm64/boot/dts/qcom/sdm845-oneplus-enchilada.dts b/arch/arm64/boot/dts/qcom/sdm845-oneplus-enchilada.dts index 5936b47dee5f..bf2cf92e8976 100644 --- a/arch/arm64/boot/dts/qcom/sdm845-oneplus-enchilada.dts +++ b/arch/arm64/boot/dts/qcom/sdm845-oneplus-enchilada.dts @@ -13,6 +13,14 @@ chassis-type = "handset"; qcom,msm-id = <0x141 0x20001>; qcom,board-id = <8 0 17819 22>; + + battery: battery { + compatible = "simple-battery"; + + charge-full-design-microamp-hours = <3300000>; + voltage-min-design-microvolt = <3400000>; + voltage-max-design-microvolt = <4400000>; + }; }; &display_panel { @@ -20,3 +28,7 @@ compatible = "samsung,sofef00"; }; + +&bq27441_fg { + monitored-battery = <&battery>; +}; diff --git a/arch/arm64/boot/dts/qcom/sdm845-oneplus-fajita.dts b/arch/arm64/boot/dts/qcom/sdm845-oneplus-fajita.dts index 78a0b99144e6..1b6b5bf368df 100644 --- a/arch/arm64/boot/dts/qcom/sdm845-oneplus-fajita.dts +++ b/arch/arm64/boot/dts/qcom/sdm845-oneplus-fajita.dts @@ -13,6 +13,14 @@ chassis-type = "handset"; qcom,msm-id = <0x141 0x20001>; qcom,board-id = <8 0 18801 41>; + + battery: battery { + compatible = "simple-battery"; + + charge-full-design-microamp-hours = <3700000>; + voltage-min-design-microvolt = <3400000>; + voltage-max-design-microvolt = <4400000>; + }; }; &display_panel { @@ -21,6 +29,10 @@ compatible = "samsung,s6e3fc2x01"; }; +&bq27441_fg { + monitored-battery = <&battery>; +}; + &rmi4_f12 { touchscreen-y-mm = <148>; }; diff --git a/arch/arm64/boot/dts/qcom/sdm845-shift-axolotl.dts b/arch/arm64/boot/dts/qcom/sdm845-shift-axolotl.dts new file mode 100644 index 000000000000..8553c8bf79bd --- /dev/null +++ b/arch/arm64/boot/dts/qcom/sdm845-shift-axolotl.dts @@ -0,0 +1,736 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (c) 2022, Alexander Martinz <amartinz@shiftphones.com> + * Copyright (c) 2022, Caleb Connolly <caleb@connolly.tech> + */ + +/dts-v1/; + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/regulator/qcom,rpmh-regulator.h> +#include "sdm845.dtsi" +#include "pm8998.dtsi" +#include "pmi8998.dtsi" + +/ { + model = "SHIFT SHIFT6mq"; + compatible = "shift,axolotl", "qcom,sdm845"; + qcom,msm-id = <321 0x20001>; + qcom,board-id = <11 0>; + + aliases { + display0 = &framebuffer0; + serial0 = &uart9; + }; + + chosen { + #address-cells = <2>; + #size-cells = <2>; + ranges; + + stdout-path = "serial0"; + + /* Use framebuffer setup by the bootloader. */ + framebuffer0: framebuffer@9d400000 { + compatible = "simple-framebuffer"; + reg = <0x0 0x9d400000 0x0 (1080 * 2160 * 4)>; + width = <1080>; + height = <2160>; + stride = <(1080 * 4)>; + format = "a8r8g8b8"; + }; + }; + + gpio-keys { + compatible = "gpio-keys"; + autorepeat; + + pinctrl-names = "default"; + pinctrl-0 = <&volume_up_gpio>; + + vol-up { + label = "volume_up"; + linux,code = <KEY_VOLUMEUP>; + gpios = <&pm8998_gpio 6 GPIO_ACTIVE_LOW>; + debounce-interval = <15>; + }; + }; + + reserved-memory { + framebuffer_region@9d400000 { + reg = <0x0 0x9d400000 0x0 (1080 * 2160 * 4)>; + no-map; + }; + + ramoops: ramoops@b0000000 { + compatible = "ramoops"; + reg = <0 0xb0000000 0 0x00400000>; + record-size = <0x40000>; + console-size = <0x40000>; + ftrace-size = <0x40000>; + pmsg-size = <0x200000>; + ecc-size = <0x0>; + }; + }; + + battery: battery { + compatible = "simple-battery"; + + charge-full-design-microamp-hours = <3850000>; + voltage-min-design-microvolt = <3600000>; + voltage-max-design-microvolt = <4400000>; + }; + + vph_pwr: vph-pwr-regulator { + compatible = "regulator-fixed"; + regulator-name = "vph_pwr"; + regulator-min-microvolt = <3700000>; + regulator-max-microvolt = <3700000>; + }; + + vreg_s4a_1p8: pm8998-smps4 { + compatible = "regulator-fixed"; + regulator-name = "vreg_s4a_1p8"; + + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + + regulator-always-on; + regulator-boot-on; + + vin-supply = <&vph_pwr>; + }; +}; + +&adsp_pas { + status = "okay"; + firmware-name = "qcom/sdm845/axolotl/adsp.mbn"; +}; + +&apps_rsc { + pm8998-rpmh-regulators { + compatible = "qcom,pm8998-rpmh-regulators"; + qcom,pmic-id = "a"; + + vdd-s1-supply = <&vph_pwr>; + vdd-s2-supply = <&vph_pwr>; + vdd-s3-supply = <&vph_pwr>; + vdd-s4-supply = <&vph_pwr>; + vdd-s5-supply = <&vph_pwr>; + vdd-s6-supply = <&vph_pwr>; + vdd-s7-supply = <&vph_pwr>; + vdd-s8-supply = <&vph_pwr>; + vdd-s9-supply = <&vph_pwr>; + vdd-s10-supply = <&vph_pwr>; + vdd-s11-supply = <&vph_pwr>; + vdd-s12-supply = <&vph_pwr>; + vdd-s13-supply = <&vph_pwr>; + vdd-l1-l27-supply = <&vreg_s7a_1p025>; + vdd-l2-l8-l17-supply = <&vreg_s3a_1p35>; + vdd-l3-l11-supply = <&vreg_s7a_1p025>; + vdd-l4-l5-supply = <&vreg_s7a_1p025>; + vdd-l6-supply = <&vph_pwr>; + vdd-l7-l12-l14-l15-supply = <&vreg_s5a_2p04>; + vdd-l9-supply = <&vreg_bob>; + vdd-l10-l23-l25-supply = <&vreg_bob>; + vdd-l13-l19-l21-supply = <&vreg_bob>; + vdd-l16-l28-supply = <&vreg_bob>; + vdd-l18-l22-supply = <&vreg_bob>; + vdd-l20-l24-supply = <&vreg_bob>; + vdd-l26-supply = <&vreg_s3a_1p35>; + vin-lvs-1-2-supply = <&vreg_s4a_1p8>; + + vreg_s2a_1p125: smps2 { + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <1100000>; + }; + + vreg_s3a_1p35: smps3 { + regulator-min-microvolt = <1352000>; + regulator-max-microvolt = <1352000>; + }; + + vreg_s5a_2p04: smps5 { + regulator-min-microvolt = <1904000>; + regulator-max-microvolt = <2040000>; + }; + + vreg_s7a_1p025: smps7 { + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <1028000>; + }; + + vdd_qusb_hs0: + vdda_hp_pcie_core: + vdda_mipi_csi0_0p9: + vdda_mipi_csi1_0p9: + vdda_mipi_csi2_0p9: + vdda_mipi_dsi0_pll: + vdda_mipi_dsi1_pll: + vdda_qlink_lv: + vdda_qlink_lv_ck: + vdda_qrefs_0p875: + vdda_pcie_core: + vdda_pll_cc_ebi01: + vdda_pll_cc_ebi23: + vdda_sp_sensor: + vdda_ufs1_core: + vdda_ufs2_core: + vdda_usb1_ss_core: + vdda_usb2_ss_core: + vreg_l1a_0p875: ldo1 { + regulator-min-microvolt = <880000>; + regulator-max-microvolt = <880000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vddpx_10: + vreg_l2a_1p2: ldo2 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + regulator-always-on; + }; + + vreg_l3a_1p0: ldo3 { + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vdd_wcss_cx: + vdd_wcss_mx: + vdda_wcss_pll: + vreg_l5a_0p8: ldo5 { + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vddpx_13: + vreg_l6a_1p8: ldo6 { + regulator-min-microvolt = <1856000>; + regulator-max-microvolt = <1856000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l7a_1p8: ldo7 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l8a_1p2: ldo8 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1248000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l9a_1p8: ldo9 { + regulator-min-microvolt = <1704000>; + regulator-max-microvolt = <2928000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l10a_1p8: ldo10 { + regulator-min-microvolt = <1704000>; + regulator-max-microvolt = <2928000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l11a_1p0: ldo11 { + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1048000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vdd_qfprom: + vdd_qfprom_sp: + vdda_apc1_cs_1p8: + vdda_gfx_cs_1p8: + vdda_qrefs_1p8: + vdda_qusb_hs0_1p8: + vddpx_11: + vreg_l12a_1p8: ldo12 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vddpx_2: + vreg_l13a_2p95: ldo13 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2960000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l14a_1p88: ldo14 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l15a_1p8: ldo15 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l16a_2p7: ldo16 { + regulator-min-microvolt = <2704000>; + regulator-max-microvolt = <2704000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l17a_1p3: ldo17 { + regulator-min-microvolt = <1304000>; + regulator-max-microvolt = <1304000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l18a_2p7: ldo18 { + regulator-min-microvolt = <2704000>; + regulator-max-microvolt = <2960000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l19a_3p0: ldo19 { + regulator-min-microvolt = <2856000>; + regulator-max-microvolt = <3104000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l20a_2p95: ldo20 { + regulator-min-microvolt = <2704000>; + regulator-max-microvolt = <2960000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l21a_2p95: ldo21 { + regulator-min-microvolt = <2704000>; + regulator-max-microvolt = <2960000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l22a_2p85: ldo22 { + regulator-min-microvolt = <2864000>; + regulator-max-microvolt = <3312000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l23a_3p3: ldo23 { + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3312000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vdda_qusb_hs0_3p1: + vreg_l24a_3p075: ldo24 { + regulator-min-microvolt = <3088000>; + regulator-max-microvolt = <3088000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l25a_3p3: ldo25 { + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3312000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vdda_hp_pcie_1p2: + vdda_hv_ebi0: + vdda_hv_ebi1: + vdda_hv_ebi2: + vdda_hv_ebi3: + vdda_mipi_csi_1p25: + vdda_mipi_dsi0_1p2: + vdda_mipi_dsi1_1p2: + vdda_pcie_1p2: + vdda_ufs1_1p2: + vdda_ufs2_1p2: + vdda_usb1_ss_1p2: + vdda_usb2_ss_1p2: + vreg_l26a_1p2: ldo26 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l28a_3p0: ldo28 { + regulator-min-microvolt = <2856000>; + regulator-max-microvolt = <3008000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_lvs1a_1p8: lvs1 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + vreg_lvs2a_1p8: lvs2 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + }; + + pmi8998-rpmh-regulators { + compatible = "qcom,pmi8998-rpmh-regulators"; + qcom,pmic-id = "b"; + + vdd-bob-supply = <&vph_pwr>; + + vreg_bob: bob { + regulator-min-microvolt = <3312000>; + regulator-max-microvolt = <3600000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_AUTO>; + regulator-allow-bypass; + }; + }; + + pm8005-rpmh-regulators { + compatible = "qcom,pm8005-rpmh-regulators"; + qcom,pmic-id = "c"; + + vdd-s1-supply = <&vph_pwr>; + vdd-s2-supply = <&vph_pwr>; + vdd-s3-supply = <&vph_pwr>; + vdd-s4-supply = <&vph_pwr>; + + vreg_s3c_0p6: smps3 { + regulator-min-microvolt = <600000>; + regulator-max-microvolt = <600000>; + }; + }; +}; + +&cdsp_pas { + status = "okay"; + firmware-name = "qcom/sdm845/axolotl/cdsp.mbn"; +}; + +&dsi0 { + status = "okay"; + vdda-supply = <&vdda_mipi_dsi0_1p2>; + + panel@0 { + compatible = "visionox,rm69299-shift"; + status = "okay"; + reg = <0>; + vdda-supply = <&vreg_l14a_1p88>; + vdd3p3-supply = <&vreg_l28a_3p0>; + + #address-cells = <1>; + #size-cells = <0>; + + reset-gpios = <&tlmm 6 GPIO_ACTIVE_HIGH>; + + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&sde_dsi_active &sde_te_active>; + pinctrl-1 = <&sde_dsi_suspend &sde_te_suspend>; + + port { + panel_in_0: endpoint { + remote-endpoint = <&dsi0_out>; + }; + }; + }; +}; + +&dsi0_out { + remote-endpoint = <&panel_in_0>; + data-lanes = <0 1 2 3>; +}; + +&dsi0_phy { + status = "okay"; + vdds-supply = <&vdda_mipi_dsi0_pll>; +}; + +&gcc { + protected-clocks = <GCC_QSPI_CORE_CLK>, + <GCC_QSPI_CORE_CLK_SRC>, + <GCC_QSPI_CNOC_PERIPH_AHB_CLK>, + <GCC_LPASS_Q6_AXI_CLK>, + <GCC_LPASS_SWAY_CLK>; +}; + +&gmu { + status = "okay"; +}; + +&gpu { + status = "okay"; + + zap-shader { + memory-region = <&gpu_mem>; + firmware-name = "qcom/sdm845/axolotl/a630_zap.mbn"; + }; +}; + +&i2c5 { + status="okay"; + + touchscreen@38 { + compatible = "focaltech,fts8719"; + reg = <0x38>; + wakeup-source; + interrupt-parent = <&tlmm>; + interrupts = <125 0x2>; + vdd-supply = <&vreg_l28a_3p0>; + vcc-i2c-supply = <&vreg_l14a_1p88>; + + pinctrl-names = "default", "suspend"; + pinctrl-0 = <&ts_int_active &ts_reset_active>; + pinctrl-1 = <&ts_int_suspend &ts_reset_suspend>; + + reset-gpio = <&tlmm 99 GPIO_ACTIVE_HIGH>; + irq-gpio = <&tlmm 125 GPIO_TRANSITORY>; + touchscreen-size-x = <1080>; + touchscreen-size-y = <2160>; + focaltech,max-touch-number = <5>; + }; +}; + +&ipa { + status = "okay"; + + memory-region = <&ipa_fw_mem>; + firmware-name = "qcom/sdm845/axolotl/ipa_fws.mbn"; +}; + +&mdss { + status = "okay"; +}; + +&mss_pil { + status = "okay"; + firmware-name = "qcom/sdm845/axolotl/mba.mbn", "qcom/sdm845/axolotl/modem.mbn"; +}; + +&pm8998_gpio { + volume_up_gpio: pm8998_gpio6 { + pinconf { + pins = "gpio6"; + function = "normal"; + input-enable; + bias-pull-up; + qcom,drive-strength = <0>; + }; + }; +}; + +&pm8998_pon { + volume_down_resin: resin { + compatible = "qcom,pm8941-resin"; + interrupts = <0x0 0x8 1 IRQ_TYPE_EDGE_BOTH>; + debounce = <15625>; + bias-pull-up; + linux,code = <KEY_VOLUMEDOWN>; + }; +}; + +&qup_uart9_default { + pinconf-rx { + pins = "gpio5"; + drive-strength = <2>; + bias-pull-up; + }; + + pinconf-tx { + pins = "gpio4"; + drive-strength = <2>; + bias-disable; + }; +}; + +&qupv3_id_0 { + status = "okay"; +}; + +&qupv3_id_1 { + status = "okay"; +}; + +&tlmm { + gpio-reserved-ranges = <0 4>, <81 4>; + + sde_dsi_active: sde-dsi-active { + mux { + pins = "gpio6", "gpio11"; + function = "gpio"; + }; + + config { + pins = "gpio6", "gpio11"; + drive-strength = <8>; + bias-disable = <0>; + }; + }; + + sde_dsi_suspend: sde-dsi-suspend { + mux { + pins = "gpio6", "gpio11"; + function = "gpio"; + }; + + config { + pins = "gpio6", "gpio11"; + drive-strength = <2>; + bias-pull-down; + }; + }; + + sde_te_active: sde-te-active { + mux { + pins = "gpio10"; + function = "mdp_vsync"; + }; + + config { + pins = "gpio10"; + drive-strength = <2>; + bias-pull-down; + }; + }; + + sde_te_suspend: sde-te-suspend { + mux { + pins = "gpio10"; + function = "mdp_vsync"; + }; + + config { + pins = "gpio10"; + drive-strength = <2>; + bias-pull-down; + }; + }; + + ts_int_active: ts-int-active { + mux { + pins = "gpio125"; + function = "gpio"; + }; + + config { + pins = "gpio125"; + drive-strength = <8>; + bias-pull-up; + input-enable; + }; + }; + + ts_int_suspend: ts-int-suspend { + mux { + pins = "gpio125"; + function = "gpio"; + }; + + config { + pins = "gpio125"; + drive-strength = <2>; + bias-pull-down; + input-enable; + }; + }; + + ts_reset_active: ts-reset-active { + mux { + pins = "gpio99"; + function = "gpio"; + }; + + config { + pins = "gpio99"; + drive-strength = <8>; + bias-pull-up; + }; + }; + + ts_reset_suspend: ts-reset-suspend { + mux { + pins = "gpio99"; + function = "gpio"; + }; + + config { + pins = "gpio99"; + drive-strength = <2>; + bias-pull-down; + }; + }; +}; + +&uart6 { + status = "okay"; + + bluetooth { + compatible = "qcom,wcn3990-bt"; + + vddio-supply = <&vreg_s4a_1p8>; + vddxo-supply = <&vreg_l7a_1p8>; + vddrf-supply = <&vreg_l17a_1p3>; + vddch0-supply = <&vreg_l25a_3p3>; + max-speed = <3200000>; + }; +}; + +&uart9 { + status = "okay"; +}; + +&ufs_mem_hc { + status = "okay"; + + reset-gpios = <&tlmm 150 GPIO_ACTIVE_LOW>; + + vcc-supply = <&vreg_l20a_2p95>; + vcc-max-microamp = <600000>; +}; + +&ufs_mem_phy { + status = "okay"; + + vdda-phy-supply = <&vdda_ufs1_core>; + vdda-pll-supply = <&vdda_ufs1_1p2>; +}; + +&usb_1 { + status = "okay"; +}; + +&usb_1_dwc3 { + dr_mode = "peripheral"; +}; + +&usb_1_hsphy { + status = "okay"; + + vdd-supply = <&vreg_l1a_0p875>; + vdda-phy-dpdm-supply = <&vreg_l24a_3p075>; + vdda-pll-supply = <&vreg_l12a_1p8>; +}; + +&usb_1_qmpphy { + status = "okay"; + + vdda-phy-supply = <&vreg_l26a_1p2>; + vdda-pll-supply = <&vreg_l1a_0p875>; +}; + +&venus { + status = "okay"; + firmware-name = "qcom/sdm845/axolotl/venus.mbn"; +}; + +&wifi { + status = "okay"; + + vdd-0.8-cx-mx-supply = <&vreg_l5a_0p8>; + vdd-1.3-rfa-supply = <&vreg_l17a_1p3>; + vdd-1.8-xo-supply = <&vreg_l7a_1p8>; + vdd-3.3-ch0-supply = <&vreg_l25a_3p3>; + vdd-3.3-ch1-supply = <&vreg_l23a_3p3>; + + qcom,snoc-host-cap-8bit-quirk; +}; diff --git a/arch/arm64/boot/dts/qcom/sdm845.dtsi b/arch/arm64/boot/dts/qcom/sdm845.dtsi index cfdeaa81f1bb..41f4e46e1f85 100644 --- a/arch/arm64/boot/dts/qcom/sdm845.dtsi +++ b/arch/arm64/boot/dts/qcom/sdm845.dtsi @@ -12,6 +12,7 @@ #include <dt-bindings/clock/qcom,lpass-sdm845.h> #include <dt-bindings/clock/qcom,rpmh.h> #include <dt-bindings/clock/qcom,videocc-sdm845.h> +#include <dt-bindings/dma/qcom-gpi.h> #include <dt-bindings/gpio/gpio.h> #include <dt-bindings/interconnect/qcom,osm-l3.h> #include <dt-bindings/interconnect/qcom,sdm845.h> @@ -79,22 +80,22 @@ #size-cells = <2>; ranges; - hyp_mem: memory@85700000 { + hyp_mem: hyp-mem@85700000 { reg = <0 0x85700000 0 0x600000>; no-map; }; - xbl_mem: memory@85e00000 { + xbl_mem: xbl-mem@85e00000 { reg = <0 0x85e00000 0 0x100000>; no-map; }; - aop_mem: memory@85fc0000 { + aop_mem: aop-mem@85fc0000 { reg = <0 0x85fc0000 0 0x20000>; no-map; }; - aop_cmd_db_mem: memory@85fe0000 { + aop_cmd_db_mem: aop-cmd-db-mem@85fe0000 { compatible = "qcom,cmd-db"; reg = <0x0 0x85fe0000 0 0x20000>; no-map; @@ -107,12 +108,12 @@ hwlocks = <&tcsr_mutex 3>; }; - tz_mem: memory@86200000 { + tz_mem: tz@86200000 { reg = <0 0x86200000 0 0x2d00000>; no-map; }; - rmtfs_mem: memory@88f00000 { + rmtfs_mem: rmtfs@88f00000 { compatible = "qcom,rmtfs-mem"; reg = <0 0x88f00000 0 0x200000>; no-map; @@ -121,67 +122,67 @@ qcom,vmid = <15>; }; - qseecom_mem: memory@8ab00000 { + qseecom_mem: qseecom@8ab00000 { reg = <0 0x8ab00000 0 0x1400000>; no-map; }; - camera_mem: memory@8bf00000 { + camera_mem: camera-mem@8bf00000 { reg = <0 0x8bf00000 0 0x500000>; no-map; }; - ipa_fw_mem: memory@8c400000 { + ipa_fw_mem: ipa-fw@8c400000 { reg = <0 0x8c400000 0 0x10000>; no-map; }; - ipa_gsi_mem: memory@8c410000 { + ipa_gsi_mem: ipa-gsi@8c410000 { reg = <0 0x8c410000 0 0x5000>; no-map; }; - gpu_mem: memory@8c415000 { + gpu_mem: gpu@8c415000 { reg = <0 0x8c415000 0 0x2000>; no-map; }; - adsp_mem: memory@8c500000 { + adsp_mem: adsp@8c500000 { reg = <0 0x8c500000 0 0x1a00000>; no-map; }; - wlan_msa_mem: memory@8df00000 { + wlan_msa_mem: wlan-msa@8df00000 { reg = <0 0x8df00000 0 0x100000>; no-map; }; - mpss_region: memory@8e000000 { + mpss_region: mpss@8e000000 { reg = <0 0x8e000000 0 0x7800000>; no-map; }; - venus_mem: memory@95800000 { + venus_mem: venus@95800000 { reg = <0 0x95800000 0 0x500000>; no-map; }; - cdsp_mem: memory@95d00000 { + cdsp_mem: cdsp@95d00000 { reg = <0 0x95d00000 0 0x800000>; no-map; }; - mba_region: memory@96500000 { + mba_region: mba@96500000 { reg = <0 0x96500000 0 0x200000>; no-map; }; - slpi_mem: memory@96700000 { + slpi_mem: slpi@96700000 { reg = <0 0x96700000 0 0x1400000>; no-map; }; - spss_mem: memory@97b00000 { + spss_mem: spss@97b00000 { reg = <0 0x97b00000 0 0x100000>; no-map; }; @@ -787,7 +788,7 @@ apr { compatible = "qcom,apr-v2"; qcom,glink-channels = "apr_audio_svc"; - qcom,apr-domain = <APR_DOMAIN_ADSP>; + qcom,domain = <APR_DOMAIN_ADSP>; #address-cells = <1>; #size-cells = <0>; qcom,intents = <512 20>; @@ -1125,6 +1126,29 @@ }; }; + gpi_dma0: dma-controller@800000 { + #dma-cells = <3>; + compatible = "qcom,sdm845-gpi-dma"; + reg = <0 0x00800000 0 0x60000>; + interrupts = <GIC_SPI 244 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 245 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 246 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 247 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 248 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 249 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 250 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 251 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 252 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 253 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 254 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 255 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 256 IRQ_TYPE_LEVEL_HIGH>; + dma-channels = <13>; + dma-channel-mask = <0xfa>; + iommus = <&apps_smmu 0x0016 0x0>; + status = "disabled"; + }; + qupv3_id_0: geniqup@8c0000 { compatible = "qcom,geni-se-qup"; reg = <0 0x008c0000 0 0x6000>; @@ -1171,6 +1195,9 @@ interconnects = <&aggre1_noc MASTER_QUP_1 0 &config_noc SLAVE_BLSP_1 0>, <&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_BLSP_1 0>; interconnect-names = "qup-core", "qup-config"; + dmas = <&gpi_dma0 0 0 QCOM_GPI_SPI>, + <&gpi_dma0 1 0 QCOM_GPI_SPI>; + dma-names = "tx", "rx"; status = "disabled"; }; @@ -1544,6 +1571,29 @@ }; }; + gpi_dma1: dma-controller@0xa00000 { + #dma-cells = <3>; + compatible = "qcom,sdm845-gpi-dma"; + reg = <0 0x00a00000 0 0x60000>; + interrupts = <GIC_SPI 279 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 280 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 281 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 282 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 283 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 284 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 293 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 294 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 295 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 296 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 297 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 298 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 299 IRQ_TYPE_LEVEL_HIGH>; + dma-channels = <13>; + dma-channel-mask = <0xfa>; + iommus = <&apps_smmu 0x06d6 0x0>; + status = "disabled"; + }; + qupv3_id_1: geniqup@ac0000 { compatible = "qcom,geni-se-qup"; reg = <0 0x00ac0000 0 0x6000>; @@ -1967,7 +2017,7 @@ }; }; - system-cache-controller@1100000 { + llcc: system-cache-controller@1100000 { compatible = "qcom,sdm845-llcc"; reg = <0 0x01100000 0 0x200000>, <0 0x01300000 0 0x50000>; reg-names = "llcc_base", "llcc_broadcast_base"; @@ -2587,6 +2637,13 @@ "gpio2", "gpio3"; function = "qup0"; }; + + config { + pins = "gpio0", "gpio1", + "gpio2", "gpio3"; + drive-strength = <6>; + bias-disable; + }; }; qup_spi1_default: qup-spi1-default { @@ -3613,10 +3670,10 @@ #clock-cells = <0>; clock-frequency = <9600000>; clock-output-names = "mclk"; - qcom,micbias1-millivolt = <1800>; - qcom,micbias2-millivolt = <1800>; - qcom,micbias3-millivolt = <1800>; - qcom,micbias4-millivolt = <1800>; + qcom,micbias1-microvolt = <1800000>; + qcom,micbias2-microvolt = <1800000>; + qcom,micbias3-microvolt = <1800000>; + qcom,micbias4-microvolt = <1800000>; #address-cells = <1>; #size-cells = <1>; @@ -4139,6 +4196,8 @@ #clock-cells = <1>; #reset-cells = <1>; #power-domain-cells = <1>; + clocks = <&rpmhcc RPMH_CXO_CLK>; + clock-names = "bi_tcxo"; }; dsi_opp_table: dsi-opp-table { @@ -4619,7 +4678,7 @@ }; aoss_qmp: power-controller@c300000 { - compatible = "qcom,sdm845-aoss-qmp"; + compatible = "qcom,sdm845-aoss-qmp", "qcom,aoss-qmp"; reg = <0 0x0c300000 0 0x100000>; interrupts = <GIC_SPI 389 IRQ_TYPE_EDGE_RISING>; mboxes = <&apss_shared 0>; @@ -5258,7 +5317,7 @@ }; }; - gpu-thermal-top { + gpu-top-thermal { polling-delay-passive = <250>; polling-delay = <1000>; @@ -5273,7 +5332,7 @@ }; }; - gpu-thermal-bottom { + gpu-bottom-thermal { polling-delay-passive = <250>; polling-delay = <1000>; diff --git a/arch/arm64/boot/dts/qcom/sdm850-lenovo-yoga-c630.dts b/arch/arm64/boot/dts/qcom/sdm850-lenovo-yoga-c630.dts index e2b9ec134cb1..f1619b3f97ef 100644 --- a/arch/arm64/boot/dts/qcom/sdm850-lenovo-yoga-c630.dts +++ b/arch/arm64/boot/dts/qcom/sdm850-lenovo-yoga-c630.dts @@ -56,19 +56,6 @@ }; }; - panel { - compatible = "boe,nv133fhm-n61"; - no-hpd; - - ports { - port { - panel_in_edp: endpoint { - remote-endpoint = <&sn65dsi86_out>; - }; - }; - }; - }; - /* Reserved memory changes for IPA */ reserved-memory { wlan_msa_mem: memory@8c400000 { @@ -98,6 +85,12 @@ clock-frequency = <19200000>; }; + + backlight: backlight { + compatible = "pwm-backlight"; + pwms = <&sn65dsi86 1000000>; + enable-gpios = <&tlmm 11 GPIO_ACTIVE_HIGH>; + }; }; &adsp_pas { @@ -419,6 +412,7 @@ clock-names = "refclk"; no-hpd; + #pwm-cells = <1>; ports { #address-cells = <1>; @@ -438,6 +432,19 @@ }; }; }; + + aux-bus { + panel: panel { + compatible = "boe,nv133fhm-n61"; + backlight = <&backlight>; + + port { + panel_in_edp: endpoint { + remote-endpoint = <&sn65dsi86_out>; + }; + }; + }; + }; }; }; diff --git a/arch/arm64/boot/dts/qcom/sdm850-samsung-w737.dts b/arch/arm64/boot/dts/qcom/sdm850-samsung-w737.dts new file mode 100644 index 000000000000..2a552d817b03 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/sdm850-samsung-w737.dts @@ -0,0 +1,748 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * Samsung Galaxy Book2 + * + * Copyright (c) 2022, Xilin Wu <strongtz@yeah.net> + */ + +/dts-v1/; + +#include <dt-bindings/pinctrl/qcom,pmic-gpio.h> +#include <dt-bindings/input/gpio-keys.h> +#include <dt-bindings/input/input.h> +#include <dt-bindings/regulator/qcom,rpmh-regulator.h> +#include <dt-bindings/sound/qcom,q6afe.h> +#include <dt-bindings/sound/qcom,q6asm.h> +#include "sdm850.dtsi" +#include "pm8998.dtsi" + +/* + * Update following upstream (sdm845.dtsi) reserved + * memory mappings for firmware loading to succeed + */ +/delete-node/ &qseecom_mem; +/delete-node/ &wlan_msa_mem; +/delete-node/ &slpi_mem; +/delete-node/ &ipa_fw_mem; +/delete-node/ &ipa_gsi_mem; +/delete-node/ &gpu_mem; +/delete-node/ &mpss_region; +/delete-node/ &adsp_mem; +/delete-node/ &cdsp_mem; +/delete-node/ &venus_mem; +/delete-node/ &mba_region; +/delete-node/ &spss_mem; + +/ { + model = "Samsung Galaxy Book2"; + compatible = "samsung,w737", "qcom,sdm845"; + chassis-type = "convertible"; + + chosen { + #address-cells = <2>; + #size-cells = <2>; + ranges; + + // Firmware initialized the display at 1280p instead of 1440p + framebuffer0: framebuffer@80400000 { + compatible = "simple-framebuffer"; + reg = <0 0x80400000 0 (1920 * 1280 * 4)>; + width = <1920>; + height = <1280>; + stride = <(1920 * 4)>; + format = "a8r8g8b8"; + }; + }; + + aliases { + hsuart0 = &uart6; + }; + + /* Reserved memory changes */ + reserved-memory { + /* Bootloader display framebuffer region */ + cont_splash_mem: memory@80400000 { + reg = <0x0 0x80400000 0x0 0x960000>; + no-map; + }; + + qseecom_mem: memory@8b500000 { + reg = <0 0x8b500000 0 0xa00000>; + no-map; + }; + + wlan_msa_mem: memory@8c400000 { + reg = <0 0x8c400000 0 0x100000>; + no-map; + }; + + slpi_mem: memory@8c500000 { + reg = <0 0x8c500000 0 0x1200000>; + no-map; + }; + + ipa_fw_mem: memory@8d700000 { + reg = <0 0x8d700000 0 0x100000>; + no-map; + }; + + gpu_mem: memory@8d800000 { + reg = <0 0x8d800000 0 0x5000>; + no-map; + }; + + mpss_region: memory@8e000000 { + reg = <0 0x8e000000 0 0x8000000>; + no-map; + }; + + adsp_mem: memory@96000000 { + reg = <0 0x96000000 0 0x2000000>; + no-map; + }; + + cdsp_mem: memory@98000000 { + reg = <0 0x98000000 0 0x800000>; + no-map; + }; + + venus_mem: memory@98800000 { + reg = <0 0x98800000 0 0x500000>; + no-map; + }; + + mba_region: memory@98d00000 { + reg = <0 0x98d00000 0 0x200000>; + no-map; + }; + + spss_mem: memory@98f00000 { + reg = <0 0x98f00000 0 0x100000>; + no-map; + }; + }; +}; + +&adsp_pas { + firmware-name = "qcom/samsung/w737/qcadsp850.mbn"; + status = "okay"; +}; + +&apps_rsc { + pm8998-rpmh-regulators { + compatible = "qcom,pm8998-rpmh-regulators"; + qcom,pmic-id = "a"; + + vdd-l2-l8-l17-supply = <&vreg_s3a_1p35>; + vdd-l7-l12-l14-l15-supply = <&vreg_s5a_2p04>; + + vreg_s2a_1p125: smps2 { + }; + + vreg_s3a_1p35: smps3 { + regulator-min-microvolt = <1352000>; + regulator-max-microvolt = <1352000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_s4a_1p8: smps4 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_s5a_2p04: smps5 { + regulator-min-microvolt = <2040000>; + regulator-max-microvolt = <2040000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_s7a_1p025: smps7 { + }; + + vdd_qusb_hs0: + vdda_hp_pcie_core: + vdda_mipi_csi0_0p9: + vdda_mipi_csi1_0p9: + vdda_mipi_csi2_0p9: + vdda_mipi_dsi0_pll: + vdda_mipi_dsi1_pll: + vdda_qlink_lv: + vdda_qlink_lv_ck: + vdda_qrefs_0p875: + vdda_pcie_core: + vdda_pll_cc_ebi01: + vdda_pll_cc_ebi23: + vdda_sp_sensor: + vdda_ufs1_core: + vdda_ufs2_core: + vdda_usb1_ss_core: + vdda_usb2_ss_core: + vreg_l1a_0p875: ldo1 { + regulator-min-microvolt = <880000>; + regulator-max-microvolt = <880000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vddpx_10: + vreg_l2a_1p2: ldo2 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + regulator-always-on; + }; + + vreg_l3a_1p0: ldo3 { + }; + + vdd_wcss_cx: + vdd_wcss_mx: + vdda_wcss_pll: + vreg_l5a_0p8: ldo5 { + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vddpx_13: + vreg_l6a_1p8: ldo6 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l7a_1p8: ldo7 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l8a_1p2: ldo8 { + }; + + vreg_l9a_1p8: ldo9 { + }; + + vreg_l10a_1p8: ldo10 { + }; + + vreg_l11a_1p0: ldo11 { + }; + + vdd_qfprom: + vdd_qfprom_sp: + vdda_apc1_cs_1p8: + vdda_gfx_cs_1p8: + vdda_qrefs_1p8: + vdda_qusb_hs0_1p8: + vddpx_11: + vreg_l12a_1p8: ldo12 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vddpx_2: + vreg_l13a_2p95: ldo13 { + }; + + vreg_l14a_1p88: ldo14 { + regulator-min-microvolt = <1880000>; + regulator-max-microvolt = <1880000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + regulator-always-on; + }; + + vreg_l15a_1p8: ldo15 { + }; + + vreg_l16a_2p7: ldo16 { + }; + + vreg_l17a_1p3: ldo17 { + regulator-min-microvolt = <1304000>; + regulator-max-microvolt = <1304000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l18a_1p8: ldo18 { + }; + + vreg_l19a_3p0: ldo19 { + regulator-min-microvolt = <3100000>; + regulator-max-microvolt = <3108000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l20a_2p95: ldo20 { + regulator-min-microvolt = <2960000>; + regulator-max-microvolt = <2960000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l21a_2p95: ldo21 { + }; + + vreg_l22a_2p85: ldo22 { + }; + + vreg_l23a_3p3: ldo23 { + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3312000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vdda_qusb_hs0_3p1: + vreg_l24a_3p075: ldo24 { + regulator-min-microvolt = <3075000>; + regulator-max-microvolt = <3083000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l25a_3p3: ldo25 { + regulator-min-microvolt = <3104000>; + regulator-max-microvolt = <3112000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vdda_hp_pcie_1p2: + vdda_hv_ebi0: + vdda_hv_ebi1: + vdda_hv_ebi2: + vdda_hv_ebi3: + vdda_mipi_csi_1p25: + vdda_mipi_dsi0_1p2: + vdda_mipi_dsi1_1p2: + vdda_pcie_1p2: + vdda_ufs1_1p2: + vdda_ufs2_1p2: + vdda_usb1_ss_1p2: + vdda_usb2_ss_1p2: + vreg_l26a_1p2: ldo26 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1208000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l28a_3p0: ldo28 { + }; + + vreg_lvs1a_1p8: lvs1 { + }; + + vreg_lvs2a_1p8: lvs2 { + }; + }; +}; + +&cdsp_pas { + firmware-name = "qcom/samsung/w737/qccdsp850.mbn"; + status = "okay"; +}; + +&gcc { + protected-clocks = <GCC_QSPI_CORE_CLK>, + <GCC_QSPI_CORE_CLK_SRC>, + <GCC_QSPI_CNOC_PERIPH_AHB_CLK>, + <GCC_LPASS_Q6_AXI_CLK>, + <GCC_LPASS_SWAY_CLK>; +}; + +&i2c10 { + status = "okay"; + clock-frequency = <400000>; + + /* SN65DSI86 @ 0x2c */ + /* The panel requires dual DSI, which is not supported by the bridge driver */ +}; + +&i2c11 { + status = "okay"; + clock-frequency = <400000>; + + /* HID-I2C Touchscreen @ 0x20 */ +}; + +&i2c15 { + status = "okay"; + clock-frequency = <400000>; + + digitizer@9 { + compatible = "wacom,w9013", "hid-over-i2c"; + reg = <0x9>; + pinctrl-names = "default"; + pinctrl-0 = <&pen_irq_l>, <&pen_pdct_l>, <&pen_rst_l>; + + post-power-on-delay-ms = <120>; + + interrupt-parent = <&tlmm>; + interrupts = <119 IRQ_TYPE_LEVEL_LOW>; + + hid-descr-addr = <0x1>; + }; +}; + +&ipa { + status = "okay"; + memory-region = <&ipa_fw_mem>; + firmware-name = "qcom/samsung/w737/ipa_fws.elf"; +}; + +/* No idea why it causes an SError when enabled */ +&llcc { + status = "disabled"; +}; + +&mss_pil { + status = "okay"; + firmware-name = "qcom/samsung/w737/qcdsp1v2850.mbn", "qcom/samsung/w737/qcdsp2850.mbn"; +}; + +&qup_i2c10_default { + pinconf { + pins = "gpio55", "gpio56"; + drive-strength = <2>; + bias-disable; + }; +}; + +&qup_i2c11_default { + pinconf { + pins = "gpio31", "gpio32"; + drive-strength = <2>; + bias-disable; + }; +}; + +&qup_i2c12_default { + drive-strength = <2>; + bias-disable; +}; + +&qup_uart6_default { + pinmux { + pins = "gpio45", "gpio46", "gpio47", "gpio48"; + function = "qup6"; + }; + + cts { + pins = "gpio45"; + bias-pull-down; + }; + + rts-tx { + pins = "gpio46", "gpio47"; + drive-strength = <2>; + bias-disable; + }; + + rx { + pins = "gpio48"; + bias-pull-up; + }; +}; + +&qupv3_id_0 { + status = "okay"; +}; + +&qupv3_id_1 { + status = "okay"; +}; + +&q6asmdai { + dai@0 { + reg = <0>; + }; + + dai@1 { + reg = <1>; + }; + + dai@2 { + reg = <2>; + }; +}; + +&sound { + compatible = "qcom,sdm845-sndcard"; + model = "Samsung-W737"; + + audio-routing = + "RX_BIAS", "MCLK", + "AMIC2", "MIC BIAS2", + "SpkrLeft IN", "SPK1 OUT", + "SpkrRight IN", "SPK2 OUT", + "MM_DL1", "MultiMedia1 Playback", + "MM_DL3", "MultiMedia3 Playback", + "MultiMedia2 Capture", "MM_UL2"; + + mm1-dai-link { + link-name = "MultiMedia1"; + cpu { + sound-dai = <&q6asmdai MSM_FRONTEND_DAI_MULTIMEDIA1>; + }; + }; + + mm2-dai-link { + link-name = "MultiMedia2"; + cpu { + sound-dai = <&q6asmdai MSM_FRONTEND_DAI_MULTIMEDIA2>; + }; + }; + + mm3-dai-link { + link-name = "MultiMedia3"; + cpu { + sound-dai = <&q6asmdai MSM_FRONTEND_DAI_MULTIMEDIA3>; + }; + }; + + slim-dai-link { + link-name = "SLIM Playback"; + cpu { + sound-dai = <&q6afedai SLIMBUS_0_RX>; + }; + + platform { + sound-dai = <&q6routing>; + }; + + codec { + sound-dai = <&left_spkr>, <&right_spkr>, <&swm 0>, <&wcd9340 0>; + }; + }; + + slimcap-dai-link { + link-name = "SLIM Capture"; + cpu { + sound-dai = <&q6afedai SLIMBUS_0_TX>; + }; + + platform { + sound-dai = <&q6routing>; + }; + + codec { + sound-dai = <&wcd9340 1>; + }; + }; + + slim-wcd-dai-link { + link-name = "SLIM WCD Playback"; + cpu { + sound-dai = <&q6afedai SLIMBUS_1_RX>; + }; + + platform { + sound-dai = <&q6routing>; + }; + + codec { + sound-dai = <&wcd9340 2>; + }; + }; +}; + +&tlmm { + gpio-reserved-ranges = <0 6>, <85 4>; + + pen_irq_l: pen-irq-l { + pinmux { + pins = "gpio119"; + function = "gpio"; + }; + + pinconf { + pins = "gpio119"; + bias-disable; + }; + }; + + pen_pdct_l: pen-pdct-l { + pinmux { + pins = "gpio124"; + function = "gpio"; + }; + + pinconf { + pins = "gpio124"; + bias-disable; + drive-strength = <2>; + output-high; + }; + }; + + pen_rst_l: pen-rst-l { + pinmux { + pins = "gpio21"; + function = "gpio"; + }; + + pinconf { + pins = "gpio21"; + bias-disable; + drive-strength = <2>; + + /* + * The pen driver doesn't currently support + * driving this reset line. By specifying + * output-high here we're relying on the fact + * that this pin has a default pulldown at boot + * (which makes sure the pen was in reset if it + * was powered) and then we set it high here to + * take it out of reset. Better would be if the + * pen driver could control this and we could + * remove "output-high" here. + */ + output-high; + }; + }; + + wcd_intr_default: wcd_intr_default { + pins = "gpio54"; + function = "gpio"; + + input-enable; + bias-pull-down; + drive-strength = <2>; + }; +}; + +&uart6 { + status = "okay"; + + bluetooth { + compatible = "qcom,wcn3990-bt"; + + vddio-supply = <&vreg_s4a_1p8>; + vddxo-supply = <&vreg_l7a_1p8>; + vddrf-supply = <&vreg_l17a_1p3>; + vddch0-supply = <&vreg_l25a_3p3>; + vddch1-supply = <&vreg_l23a_3p3>; + max-speed = <3200000>; + }; +}; + +&ufs_mem_hc { + status = "okay"; + + reset-gpios = <&tlmm 150 GPIO_ACTIVE_LOW>; + + vcc-supply = <&vreg_l20a_2p95>; + vcc-max-microamp = <600000>; +}; + +&ufs_mem_phy { + status = "okay"; + + vdda-phy-supply = <&vdda_ufs1_core>; + vdda-pll-supply = <&vdda_ufs1_1p2>; +}; + +&usb_1 { + status = "okay"; +}; + +&usb_1_dwc3 { + dr_mode = "host"; +}; + +&usb_1_hsphy { + status = "okay"; + + vdd-supply = <&vdda_usb1_ss_core>; + vdda-pll-supply = <&vdda_qusb_hs0_1p8>; + vdda-phy-dpdm-supply = <&vdda_qusb_hs0_3p1>; + + qcom,imp-res-offset-value = <8>; + qcom,hstx-trim-value = <QUSB2_V2_HSTX_TRIM_21_6_MA>; + qcom,preemphasis-level = <QUSB2_V2_PREEMPHASIS_5_PERCENT>; + qcom,preemphasis-width = <QUSB2_V2_PREEMPHASIS_WIDTH_HALF_BIT>; +}; + +&usb_1_qmpphy { + status = "okay"; + + vdda-phy-supply = <&vdda_usb1_ss_1p2>; + vdda-pll-supply = <&vdda_usb1_ss_core>; +}; + +&usb_2 { + status = "okay"; +}; + +&usb_2_dwc3 { + dr_mode = "host"; +}; + +&usb_2_hsphy { + status = "okay"; + + vdd-supply = <&vdda_usb2_ss_core>; + vdda-pll-supply = <&vdda_qusb_hs0_1p8>; + vdda-phy-dpdm-supply = <&vdda_qusb_hs0_3p1>; + + qcom,imp-res-offset-value = <8>; + qcom,hstx-trim-value = <QUSB2_V2_HSTX_TRIM_22_8_MA>; +}; + +&usb_2_qmpphy { + status = "okay"; + + vdda-phy-supply = <&vdda_usb2_ss_1p2>; + vdda-pll-supply = <&vdda_usb2_ss_core>; +}; + +&venus { + status = "okay"; + firmware-name = "qcom/samsung/w737/qcvss850.mbn"; +}; + +&wcd9340{ + pinctrl-0 = <&wcd_intr_default>; + pinctrl-names = "default"; + clock-names = "extclk"; + clocks = <&rpmhcc RPMH_LN_BB_CLK2>; + reset-gpios = <&tlmm 64 0>; + vdd-buck-supply = <&vreg_s4a_1p8>; + vdd-buck-sido-supply = <&vreg_s4a_1p8>; + vdd-tx-supply = <&vreg_s4a_1p8>; + vdd-rx-supply = <&vreg_s4a_1p8>; + vdd-io-supply = <&vreg_s4a_1p8>; + qcom,mbhc-buttons-vthreshold-microvolt = <75000 150000 237000 500000 500000 500000 500000 500000>; + qcom,mbhc-headset-vthreshold-microvolt = <1700000>; + qcom,mbhc-headphone-vthreshold-microvolt = <50000>; + + swm: swm@c85 { + left_spkr: wsa8810-left{ + compatible = "sdw10217211000"; + reg = <0 3>; + powerdown-gpios = <&wcdgpio 1 GPIO_ACTIVE_HIGH>; + #thermal-sensor-cells = <0>; + sound-name-prefix = "SpkrLeft"; + #sound-dai-cells = <0>; + }; + + right_spkr: wsa8810-right{ + compatible = "sdw10217211000"; + powerdown-gpios = <&wcdgpio 2 GPIO_ACTIVE_HIGH>; + reg = <0 4>; + #thermal-sensor-cells = <0>; + sound-name-prefix = "SpkrRight"; + #sound-dai-cells = <0>; + }; + }; +}; + +&wifi { + status = "okay"; + + vdd-0.8-cx-mx-supply = <&vreg_l5a_0p8>; + vdd-1.8-xo-supply = <&vreg_l7a_1p8>; + vdd-1.3-rfa-supply = <&vreg_l17a_1p3>; + vdd-3.3-ch0-supply = <&vreg_l25a_3p3>; + vdd-3.3-ch1-supply = <&vreg_l23a_3p3>; + + qcom,snoc-host-cap-8bit-quirk; +}; diff --git a/arch/arm64/boot/dts/qcom/sm6125.dtsi b/arch/arm64/boot/dts/qcom/sm6125.dtsi index 49e6bca646c2..e81b2a7794fb 100644 --- a/arch/arm64/boot/dts/qcom/sm6125.dtsi +++ b/arch/arm64/boot/dts/qcom/sm6125.dtsi @@ -449,7 +449,7 @@ <&xo_board>; clock-names = "iface", "core", "xo"; - power-domains = <&rpmpd 0>; + power-domains = <&rpmpd SM6125_VDDCX>; bus-width = <8>; non-removable; @@ -474,7 +474,7 @@ pinctrl-1 = <&sdc2_state_off>; pinctrl-names = "default", "sleep"; - power-domains = <&rpmpd 0>; + power-domains = <&rpmpd SM6125_VDDCX>; bus-width = <4>; status = "disabled"; diff --git a/arch/arm64/boot/dts/qcom/sm7225-fairphone-fp4.dts b/arch/arm64/boot/dts/qcom/sm7225-fairphone-fp4.dts index d4af9e0dad87..adb6ca2be2a5 100644 --- a/arch/arm64/boot/dts/qcom/sm7225-fairphone-fp4.dts +++ b/arch/arm64/boot/dts/qcom/sm7225-fairphone-fp4.dts @@ -10,6 +10,7 @@ #include <dt-bindings/pinctrl/qcom,pmic-gpio.h> #include <dt-bindings/regulator/qcom,rpmh-regulator.h> #include "sm7225.dtsi" +#include "pm6150l.dtsi" #include "pm6350.dtsi" / { @@ -300,6 +301,14 @@ firmware-name = "qcom/sm7225/fairphone4/modem.mdt"; }; +&pm6150l_wled { + status = "okay"; + + qcom,switching-freq = <800>; + qcom,current-limit-microamp = <20000>; + qcom,num-strings = <2>; +}; + &pm6350_gpios { gpio_keys_pin: gpio-keys-pin { pins = "gpio2"; diff --git a/arch/arm64/boot/dts/qcom/sm8150-microsoft-surface-duo.dts b/arch/arm64/boot/dts/qcom/sm8150-microsoft-surface-duo.dts index 5901c28e6696..a73317e1a824 100644 --- a/arch/arm64/boot/dts/qcom/sm8150-microsoft-surface-duo.dts +++ b/arch/arm64/boot/dts/qcom/sm8150-microsoft-surface-duo.dts @@ -430,18 +430,8 @@ /* MAX34417 @ 0x1e */ }; -&pon { - pwrkey { - status = "okay"; - }; - - resin { - compatible = "qcom,pm8941-resin"; - interrupts = <0x0 0x8 0x1 IRQ_TYPE_EDGE_BOTH>; - debounce = <15625>; - bias-pull-up; - linux,code = <KEY_VOLUMEDOWN>; - }; +&pon_pwrkey { + status = "okay"; }; &qupv3_id_0 { @@ -476,6 +466,12 @@ firmware-name = "qcom/sm8150/microsoft/slpi.mdt"; }; +&pon_resin { + status = "okay"; + + linux,code = <KEY_VOLUMEDOWN>; +}; + &tlmm { gpio-reserved-ranges = <126 4>; diff --git a/arch/arm64/boot/dts/qcom/sm8150.dtsi b/arch/arm64/boot/dts/qcom/sm8150.dtsi index 6012322a5984..d15fee495238 100644 --- a/arch/arm64/boot/dts/qcom/sm8150.dtsi +++ b/arch/arm64/boot/dts/qcom/sm8150.dtsi @@ -932,6 +932,9 @@ reg = <0 0x00880000 0 0x4000>; clock-names = "se"; clocks = <&gcc GCC_QUPV3_WRAP0_S0_CLK>; + dmas = <&gpi_dma0 0 0 QCOM_GPI_I2C>, + <&gpi_dma0 1 0 QCOM_GPI_I2C>; + dma-names = "tx", "rx"; pinctrl-names = "default"; pinctrl-0 = <&qup_i2c0_default>; interrupts = <GIC_SPI 601 IRQ_TYPE_LEVEL_HIGH>; @@ -946,6 +949,9 @@ reg-names = "se"; clock-names = "se"; clocks = <&gcc GCC_QUPV3_WRAP0_S0_CLK>; + dmas = <&gpi_dma0 0 0 QCOM_GPI_SPI>, + <&gpi_dma0 1 0 QCOM_GPI_SPI>; + dma-names = "tx", "rx"; pinctrl-names = "default"; pinctrl-0 = <&qup_spi0_default>; interrupts = <GIC_SPI 601 IRQ_TYPE_LEVEL_HIGH>; @@ -960,6 +966,9 @@ reg = <0 0x00884000 0 0x4000>; clock-names = "se"; clocks = <&gcc GCC_QUPV3_WRAP0_S1_CLK>; + dmas = <&gpi_dma0 0 1 QCOM_GPI_I2C>, + <&gpi_dma0 1 1 QCOM_GPI_I2C>; + dma-names = "tx", "rx"; pinctrl-names = "default"; pinctrl-0 = <&qup_i2c1_default>; interrupts = <GIC_SPI 602 IRQ_TYPE_LEVEL_HIGH>; @@ -974,6 +983,9 @@ reg-names = "se"; clock-names = "se"; clocks = <&gcc GCC_QUPV3_WRAP0_S1_CLK>; + dmas = <&gpi_dma0 0 1 QCOM_GPI_SPI>, + <&gpi_dma0 1 1 QCOM_GPI_SPI>; + dma-names = "tx", "rx"; pinctrl-names = "default"; pinctrl-0 = <&qup_spi1_default>; interrupts = <GIC_SPI 602 IRQ_TYPE_LEVEL_HIGH>; @@ -988,6 +1000,9 @@ reg = <0 0x00888000 0 0x4000>; clock-names = "se"; clocks = <&gcc GCC_QUPV3_WRAP0_S2_CLK>; + dmas = <&gpi_dma0 0 2 QCOM_GPI_I2C>, + <&gpi_dma0 1 2 QCOM_GPI_I2C>; + dma-names = "tx", "rx"; pinctrl-names = "default"; pinctrl-0 = <&qup_i2c2_default>; interrupts = <GIC_SPI 603 IRQ_TYPE_LEVEL_HIGH>; @@ -1002,6 +1017,9 @@ reg-names = "se"; clock-names = "se"; clocks = <&gcc GCC_QUPV3_WRAP0_S2_CLK>; + dmas = <&gpi_dma0 0 2 QCOM_GPI_SPI>, + <&gpi_dma0 1 2 QCOM_GPI_SPI>; + dma-names = "tx", "rx"; pinctrl-names = "default"; pinctrl-0 = <&qup_spi2_default>; interrupts = <GIC_SPI 603 IRQ_TYPE_LEVEL_HIGH>; @@ -1016,6 +1034,9 @@ reg = <0 0x0088c000 0 0x4000>; clock-names = "se"; clocks = <&gcc GCC_QUPV3_WRAP0_S3_CLK>; + dmas = <&gpi_dma0 0 3 QCOM_GPI_I2C>, + <&gpi_dma0 1 3 QCOM_GPI_I2C>; + dma-names = "tx", "rx"; pinctrl-names = "default"; pinctrl-0 = <&qup_i2c3_default>; interrupts = <GIC_SPI 604 IRQ_TYPE_LEVEL_HIGH>; @@ -1030,6 +1051,9 @@ reg-names = "se"; clock-names = "se"; clocks = <&gcc GCC_QUPV3_WRAP0_S3_CLK>; + dmas = <&gpi_dma0 0 3 QCOM_GPI_SPI>, + <&gpi_dma0 1 3 QCOM_GPI_SPI>; + dma-names = "tx", "rx"; pinctrl-names = "default"; pinctrl-0 = <&qup_spi3_default>; interrupts = <GIC_SPI 604 IRQ_TYPE_LEVEL_HIGH>; @@ -1044,6 +1068,9 @@ reg = <0 0x00890000 0 0x4000>; clock-names = "se"; clocks = <&gcc GCC_QUPV3_WRAP0_S4_CLK>; + dmas = <&gpi_dma0 0 4 QCOM_GPI_I2C>, + <&gpi_dma0 1 4 QCOM_GPI_I2C>; + dma-names = "tx", "rx"; pinctrl-names = "default"; pinctrl-0 = <&qup_i2c4_default>; interrupts = <GIC_SPI 605 IRQ_TYPE_LEVEL_HIGH>; @@ -1058,6 +1085,9 @@ reg-names = "se"; clock-names = "se"; clocks = <&gcc GCC_QUPV3_WRAP0_S4_CLK>; + dmas = <&gpi_dma0 0 4 QCOM_GPI_SPI>, + <&gpi_dma0 1 4 QCOM_GPI_SPI>; + dma-names = "tx", "rx"; pinctrl-names = "default"; pinctrl-0 = <&qup_spi4_default>; interrupts = <GIC_SPI 605 IRQ_TYPE_LEVEL_HIGH>; @@ -1072,6 +1102,9 @@ reg = <0 0x00894000 0 0x4000>; clock-names = "se"; clocks = <&gcc GCC_QUPV3_WRAP0_S5_CLK>; + dmas = <&gpi_dma0 0 5 QCOM_GPI_I2C>, + <&gpi_dma0 1 5 QCOM_GPI_I2C>; + dma-names = "tx", "rx"; pinctrl-names = "default"; pinctrl-0 = <&qup_i2c5_default>; interrupts = <GIC_SPI 606 IRQ_TYPE_LEVEL_HIGH>; @@ -1086,6 +1119,9 @@ reg-names = "se"; clock-names = "se"; clocks = <&gcc GCC_QUPV3_WRAP0_S5_CLK>; + dmas = <&gpi_dma0 0 5 QCOM_GPI_SPI>, + <&gpi_dma0 1 5 QCOM_GPI_SPI>; + dma-names = "tx", "rx"; pinctrl-names = "default"; pinctrl-0 = <&qup_spi5_default>; interrupts = <GIC_SPI 606 IRQ_TYPE_LEVEL_HIGH>; @@ -1100,6 +1136,9 @@ reg = <0 0x00898000 0 0x4000>; clock-names = "se"; clocks = <&gcc GCC_QUPV3_WRAP0_S6_CLK>; + dmas = <&gpi_dma0 0 6 QCOM_GPI_I2C>, + <&gpi_dma0 1 6 QCOM_GPI_I2C>; + dma-names = "tx", "rx"; pinctrl-names = "default"; pinctrl-0 = <&qup_i2c6_default>; interrupts = <GIC_SPI 607 IRQ_TYPE_LEVEL_HIGH>; @@ -1114,6 +1153,9 @@ reg-names = "se"; clock-names = "se"; clocks = <&gcc GCC_QUPV3_WRAP0_S6_CLK>; + dmas = <&gpi_dma0 0 6 QCOM_GPI_SPI>, + <&gpi_dma0 1 6 QCOM_GPI_SPI>; + dma-names = "tx", "rx"; pinctrl-names = "default"; pinctrl-0 = <&qup_spi6_default>; interrupts = <GIC_SPI 607 IRQ_TYPE_LEVEL_HIGH>; @@ -1128,6 +1170,9 @@ reg = <0 0x0089c000 0 0x4000>; clock-names = "se"; clocks = <&gcc GCC_QUPV3_WRAP0_S7_CLK>; + dmas = <&gpi_dma0 0 7 QCOM_GPI_I2C>, + <&gpi_dma0 1 7 QCOM_GPI_I2C>; + dma-names = "tx", "rx"; pinctrl-names = "default"; pinctrl-0 = <&qup_i2c7_default>; interrupts = <GIC_SPI 607 IRQ_TYPE_LEVEL_HIGH>; @@ -1142,6 +1187,9 @@ reg-names = "se"; clock-names = "se"; clocks = <&gcc GCC_QUPV3_WRAP0_S7_CLK>; + dmas = <&gpi_dma0 0 7 QCOM_GPI_SPI>, + <&gpi_dma0 1 7 QCOM_GPI_SPI>; + dma-names = "tx", "rx"; pinctrl-names = "default"; pinctrl-0 = <&qup_spi7_default>; interrupts = <GIC_SPI 608 IRQ_TYPE_LEVEL_HIGH>; @@ -1192,6 +1240,9 @@ reg = <0 0x00a80000 0 0x4000>; clock-names = "se"; clocks = <&gcc GCC_QUPV3_WRAP1_S0_CLK>; + dmas = <&gpi_dma1 0 0 QCOM_GPI_I2C>, + <&gpi_dma1 1 0 QCOM_GPI_I2C>; + dma-names = "tx", "rx"; pinctrl-names = "default"; pinctrl-0 = <&qup_i2c8_default>; interrupts = <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>; @@ -1206,6 +1257,9 @@ reg-names = "se"; clock-names = "se"; clocks = <&gcc GCC_QUPV3_WRAP1_S0_CLK>; + dmas = <&gpi_dma1 0 0 QCOM_GPI_SPI>, + <&gpi_dma1 1 0 QCOM_GPI_SPI>; + dma-names = "tx", "rx"; pinctrl-names = "default"; pinctrl-0 = <&qup_spi8_default>; interrupts = <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>; @@ -1220,6 +1274,9 @@ reg = <0 0x00a84000 0 0x4000>; clock-names = "se"; clocks = <&gcc GCC_QUPV3_WRAP1_S1_CLK>; + dmas = <&gpi_dma1 0 1 QCOM_GPI_I2C>, + <&gpi_dma1 1 1 QCOM_GPI_I2C>; + dma-names = "tx", "rx"; pinctrl-names = "default"; pinctrl-0 = <&qup_i2c9_default>; interrupts = <GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH>; @@ -1234,6 +1291,9 @@ reg-names = "se"; clock-names = "se"; clocks = <&gcc GCC_QUPV3_WRAP1_S1_CLK>; + dmas = <&gpi_dma1 0 1 QCOM_GPI_SPI>, + <&gpi_dma1 1 1 QCOM_GPI_SPI>; + dma-names = "tx", "rx"; pinctrl-names = "default"; pinctrl-0 = <&qup_spi9_default>; interrupts = <GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH>; @@ -1248,6 +1308,9 @@ reg = <0 0x00a88000 0 0x4000>; clock-names = "se"; clocks = <&gcc GCC_QUPV3_WRAP1_S2_CLK>; + dmas = <&gpi_dma1 0 2 QCOM_GPI_I2C>, + <&gpi_dma1 1 2 QCOM_GPI_I2C>; + dma-names = "tx", "rx"; pinctrl-names = "default"; pinctrl-0 = <&qup_i2c10_default>; interrupts = <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>; @@ -1262,6 +1325,9 @@ reg-names = "se"; clock-names = "se"; clocks = <&gcc GCC_QUPV3_WRAP1_S2_CLK>; + dmas = <&gpi_dma1 0 2 QCOM_GPI_SPI>, + <&gpi_dma1 1 2 QCOM_GPI_SPI>; + dma-names = "tx", "rx"; pinctrl-names = "default"; pinctrl-0 = <&qup_spi10_default>; interrupts = <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>; @@ -1276,6 +1342,9 @@ reg = <0 0x00a8c000 0 0x4000>; clock-names = "se"; clocks = <&gcc GCC_QUPV3_WRAP1_S3_CLK>; + dmas = <&gpi_dma1 0 3 QCOM_GPI_I2C>, + <&gpi_dma1 1 3 QCOM_GPI_I2C>; + dma-names = "tx", "rx"; pinctrl-names = "default"; pinctrl-0 = <&qup_i2c11_default>; interrupts = <GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH>; @@ -1290,6 +1359,9 @@ reg-names = "se"; clock-names = "se"; clocks = <&gcc GCC_QUPV3_WRAP1_S3_CLK>; + dmas = <&gpi_dma1 0 3 QCOM_GPI_SPI>, + <&gpi_dma1 1 3 QCOM_GPI_SPI>; + dma-names = "tx", "rx"; pinctrl-names = "default"; pinctrl-0 = <&qup_spi11_default>; interrupts = <GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH>; @@ -1313,6 +1385,9 @@ reg = <0 0x00a90000 0 0x4000>; clock-names = "se"; clocks = <&gcc GCC_QUPV3_WRAP1_S4_CLK>; + dmas = <&gpi_dma1 0 4 QCOM_GPI_I2C>, + <&gpi_dma1 1 4 QCOM_GPI_I2C>; + dma-names = "tx", "rx"; pinctrl-names = "default"; pinctrl-0 = <&qup_i2c12_default>; interrupts = <GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH>; @@ -1327,6 +1402,9 @@ reg-names = "se"; clock-names = "se"; clocks = <&gcc GCC_QUPV3_WRAP1_S4_CLK>; + dmas = <&gpi_dma1 0 4 QCOM_GPI_SPI>, + <&gpi_dma1 1 4 QCOM_GPI_SPI>; + dma-names = "tx", "rx"; pinctrl-names = "default"; pinctrl-0 = <&qup_spi12_default>; interrupts = <GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH>; @@ -1341,6 +1419,9 @@ reg = <0 0x0094000 0 0x4000>; clock-names = "se"; clocks = <&gcc GCC_QUPV3_WRAP1_S5_CLK>; + dmas = <&gpi_dma2 0 5 QCOM_GPI_I2C>, + <&gpi_dma2 1 5 QCOM_GPI_I2C>; + dma-names = "tx", "rx"; pinctrl-names = "default"; pinctrl-0 = <&qup_i2c16_default>; interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>; @@ -1355,6 +1436,9 @@ reg-names = "se"; clock-names = "se"; clocks = <&gcc GCC_QUPV3_WRAP1_S5_CLK>; + dmas = <&gpi_dma2 0 5 QCOM_GPI_SPI>, + <&gpi_dma2 1 5 QCOM_GPI_SPI>; + dma-names = "tx", "rx"; pinctrl-names = "default"; pinctrl-0 = <&qup_spi16_default>; interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>; @@ -1406,6 +1490,9 @@ reg = <0 0x00c80000 0 0x4000>; clock-names = "se"; clocks = <&gcc GCC_QUPV3_WRAP2_S0_CLK>; + dmas = <&gpi_dma2 0 0 QCOM_GPI_I2C>, + <&gpi_dma2 1 0 QCOM_GPI_I2C>; + dma-names = "tx", "rx"; pinctrl-names = "default"; pinctrl-0 = <&qup_i2c17_default>; interrupts = <GIC_SPI 373 IRQ_TYPE_LEVEL_HIGH>; @@ -1420,6 +1507,9 @@ reg-names = "se"; clock-names = "se"; clocks = <&gcc GCC_QUPV3_WRAP2_S0_CLK>; + dmas = <&gpi_dma2 0 0 QCOM_GPI_SPI>, + <&gpi_dma2 1 0 QCOM_GPI_SPI>; + dma-names = "tx", "rx"; pinctrl-names = "default"; pinctrl-0 = <&qup_spi17_default>; interrupts = <GIC_SPI 373 IRQ_TYPE_LEVEL_HIGH>; @@ -1434,6 +1524,9 @@ reg = <0 0x00c84000 0 0x4000>; clock-names = "se"; clocks = <&gcc GCC_QUPV3_WRAP2_S1_CLK>; + dmas = <&gpi_dma2 0 1 QCOM_GPI_I2C>, + <&gpi_dma2 1 1 QCOM_GPI_I2C>; + dma-names = "tx", "rx"; pinctrl-names = "default"; pinctrl-0 = <&qup_i2c18_default>; interrupts = <GIC_SPI 583 IRQ_TYPE_LEVEL_HIGH>; @@ -1448,6 +1541,9 @@ reg-names = "se"; clock-names = "se"; clocks = <&gcc GCC_QUPV3_WRAP2_S1_CLK>; + dmas = <&gpi_dma2 0 1 QCOM_GPI_SPI>, + <&gpi_dma2 1 1 QCOM_GPI_SPI>; + dma-names = "tx", "rx"; pinctrl-names = "default"; pinctrl-0 = <&qup_spi18_default>; interrupts = <GIC_SPI 583 IRQ_TYPE_LEVEL_HIGH>; @@ -1462,6 +1558,9 @@ reg = <0 0x00c88000 0 0x4000>; clock-names = "se"; clocks = <&gcc GCC_QUPV3_WRAP2_S2_CLK>; + dmas = <&gpi_dma2 0 2 QCOM_GPI_I2C>, + <&gpi_dma2 1 2 QCOM_GPI_I2C>; + dma-names = "tx", "rx"; pinctrl-names = "default"; pinctrl-0 = <&qup_i2c19_default>; interrupts = <GIC_SPI 584 IRQ_TYPE_LEVEL_HIGH>; @@ -1476,6 +1575,9 @@ reg-names = "se"; clock-names = "se"; clocks = <&gcc GCC_QUPV3_WRAP2_S2_CLK>; + dmas = <&gpi_dma2 0 2 QCOM_GPI_SPI>, + <&gpi_dma2 1 2 QCOM_GPI_SPI>; + dma-names = "tx", "rx"; pinctrl-names = "default"; pinctrl-0 = <&qup_spi19_default>; interrupts = <GIC_SPI 584 IRQ_TYPE_LEVEL_HIGH>; @@ -1490,6 +1592,9 @@ reg = <0 0x00c8c000 0 0x4000>; clock-names = "se"; clocks = <&gcc GCC_QUPV3_WRAP2_S3_CLK>; + dmas = <&gpi_dma2 0 3 QCOM_GPI_I2C>, + <&gpi_dma2 1 3 QCOM_GPI_I2C>; + dma-names = "tx", "rx"; pinctrl-names = "default"; pinctrl-0 = <&qup_i2c13_default>; interrupts = <GIC_SPI 585 IRQ_TYPE_LEVEL_HIGH>; @@ -1504,6 +1609,9 @@ reg-names = "se"; clock-names = "se"; clocks = <&gcc GCC_QUPV3_WRAP2_S3_CLK>; + dmas = <&gpi_dma2 0 3 QCOM_GPI_SPI>, + <&gpi_dma2 1 3 QCOM_GPI_SPI>; + dma-names = "tx", "rx"; pinctrl-names = "default"; pinctrl-0 = <&qup_spi13_default>; interrupts = <GIC_SPI 585 IRQ_TYPE_LEVEL_HIGH>; @@ -1518,6 +1626,9 @@ reg = <0 0x00c90000 0 0x4000>; clock-names = "se"; clocks = <&gcc GCC_QUPV3_WRAP2_S4_CLK>; + dmas = <&gpi_dma2 0 4 QCOM_GPI_I2C>, + <&gpi_dma2 1 4 QCOM_GPI_I2C>; + dma-names = "tx", "rx"; pinctrl-names = "default"; pinctrl-0 = <&qup_i2c14_default>; interrupts = <GIC_SPI 586 IRQ_TYPE_LEVEL_HIGH>; @@ -1532,6 +1643,9 @@ reg-names = "se"; clock-names = "se"; clocks = <&gcc GCC_QUPV3_WRAP2_S4_CLK>; + dmas = <&gpi_dma2 0 4 QCOM_GPI_SPI>, + <&gpi_dma2 1 4 QCOM_GPI_SPI>; + dma-names = "tx", "rx"; pinctrl-names = "default"; pinctrl-0 = <&qup_spi14_default>; interrupts = <GIC_SPI 586 IRQ_TYPE_LEVEL_HIGH>; @@ -1546,6 +1660,9 @@ reg = <0 0x00c94000 0 0x4000>; clock-names = "se"; clocks = <&gcc GCC_QUPV3_WRAP2_S5_CLK>; + dmas = <&gpi_dma2 0 5 QCOM_GPI_I2C>, + <&gpi_dma2 1 5 QCOM_GPI_I2C>; + dma-names = "tx", "rx"; pinctrl-names = "default"; pinctrl-0 = <&qup_i2c15_default>; interrupts = <GIC_SPI 587 IRQ_TYPE_LEVEL_HIGH>; @@ -1560,6 +1677,9 @@ reg-names = "se"; clock-names = "se"; clocks = <&gcc GCC_QUPV3_WRAP2_S5_CLK>; + dmas = <&gpi_dma2 0 5 QCOM_GPI_SPI>, + <&gpi_dma2 1 5 QCOM_GPI_SPI>; + dma-names = "tx", "rx"; pinctrl-names = "default"; pinctrl-0 = <&qup_spi15_default>; interrupts = <GIC_SPI 587 IRQ_TYPE_LEVEL_HIGH>; @@ -3556,9 +3676,9 @@ qcom,tcs-offset = <0xd00>; qcom,drv-id = <2>; qcom,tcs-config = <ACTIVE_TCS 2>, - <SLEEP_TCS 1>, - <WAKE_TCS 1>, - <CONTROL_TCS 0>; + <SLEEP_TCS 3>, + <WAKE_TCS 3>, + <CONTROL_TCS 1>; rpmhcc: clock-controller { compatible = "qcom,sm8150-rpmh-clk"; @@ -3649,6 +3769,30 @@ #freq-domain-cells = <1>; }; + lmh_cluster1: lmh@18350800 { + compatible = "qcom,sm8150-lmh"; + reg = <0 0x18350800 0 0x400>; + interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>; + cpus = <&CPU4>; + qcom,lmh-temp-arm-millicelsius = <60000>; + qcom,lmh-temp-low-millicelsius = <84500>; + qcom,lmh-temp-high-millicelsius = <85000>; + interrupt-controller; + #interrupt-cells = <1>; + }; + + lmh_cluster0: lmh@18358800 { + compatible = "qcom,sm8150-lmh"; + reg = <0 0x18358800 0 0x400>; + interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>; + cpus = <&CPU0>; + qcom,lmh-temp-arm-millicelsius = <60000>; + qcom,lmh-temp-low-millicelsius = <84500>; + qcom,lmh-temp-high-millicelsius = <85000>; + interrupt-controller; + #interrupt-cells = <1>; + }; + wifi: wifi@18800000 { compatible = "qcom,wcn3990-wifi"; reg = <0 0x18800000 0 0x800000>; @@ -4265,7 +4409,7 @@ }; }; - gpu-thermal-top { + gpu-top-thermal { polling-delay-passive = <250>; polling-delay = <1000>; @@ -4445,7 +4589,7 @@ }; }; - gpu-thermal-bottom { + gpu-bottom-thermal { polling-delay-passive = <250>; polling-delay = <1000>; diff --git a/arch/arm64/boot/dts/qcom/sm8250.dtsi b/arch/arm64/boot/dts/qcom/sm8250.dtsi index 5617a46e5ccd..fdaf303ba047 100644 --- a/arch/arm64/boot/dts/qcom/sm8250.dtsi +++ b/arch/arm64/boot/dts/qcom/sm8250.dtsi @@ -98,6 +98,8 @@ capacity-dmips-mhz = <448>; dynamic-power-coefficient = <205>; next-level-cache = <&L2_0>; + power-domains = <&CPU_PD0>; + power-domain-names = "psci"; qcom,freq-domain = <&cpufreq_hw 0>; operating-points-v2 = <&cpu0_opp_table>; interconnects = <&gem_noc MASTER_AMPSS_M0 &mc_virt SLAVE_EBI_CH0>, @@ -120,6 +122,8 @@ capacity-dmips-mhz = <448>; dynamic-power-coefficient = <205>; next-level-cache = <&L2_100>; + power-domains = <&CPU_PD1>; + power-domain-names = "psci"; qcom,freq-domain = <&cpufreq_hw 0>; operating-points-v2 = <&cpu0_opp_table>; interconnects = <&gem_noc MASTER_AMPSS_M0 &mc_virt SLAVE_EBI_CH0>, @@ -139,6 +143,8 @@ capacity-dmips-mhz = <448>; dynamic-power-coefficient = <205>; next-level-cache = <&L2_200>; + power-domains = <&CPU_PD2>; + power-domain-names = "psci"; qcom,freq-domain = <&cpufreq_hw 0>; operating-points-v2 = <&cpu0_opp_table>; interconnects = <&gem_noc MASTER_AMPSS_M0 &mc_virt SLAVE_EBI_CH0>, @@ -158,6 +164,8 @@ capacity-dmips-mhz = <448>; dynamic-power-coefficient = <205>; next-level-cache = <&L2_300>; + power-domains = <&CPU_PD3>; + power-domain-names = "psci"; qcom,freq-domain = <&cpufreq_hw 0>; operating-points-v2 = <&cpu0_opp_table>; interconnects = <&gem_noc MASTER_AMPSS_M0 &mc_virt SLAVE_EBI_CH0>, @@ -177,6 +185,8 @@ capacity-dmips-mhz = <1024>; dynamic-power-coefficient = <379>; next-level-cache = <&L2_400>; + power-domains = <&CPU_PD4>; + power-domain-names = "psci"; qcom,freq-domain = <&cpufreq_hw 1>; operating-points-v2 = <&cpu4_opp_table>; interconnects = <&gem_noc MASTER_AMPSS_M0 &mc_virt SLAVE_EBI_CH0>, @@ -196,6 +206,8 @@ capacity-dmips-mhz = <1024>; dynamic-power-coefficient = <379>; next-level-cache = <&L2_500>; + power-domains = <&CPU_PD5>; + power-domain-names = "psci"; qcom,freq-domain = <&cpufreq_hw 1>; operating-points-v2 = <&cpu4_opp_table>; interconnects = <&gem_noc MASTER_AMPSS_M0 &mc_virt SLAVE_EBI_CH0>, @@ -216,6 +228,8 @@ capacity-dmips-mhz = <1024>; dynamic-power-coefficient = <379>; next-level-cache = <&L2_600>; + power-domains = <&CPU_PD6>; + power-domain-names = "psci"; qcom,freq-domain = <&cpufreq_hw 1>; operating-points-v2 = <&cpu4_opp_table>; interconnects = <&gem_noc MASTER_AMPSS_M0 &mc_virt SLAVE_EBI_CH0>, @@ -235,6 +249,8 @@ capacity-dmips-mhz = <1024>; dynamic-power-coefficient = <444>; next-level-cache = <&L2_700>; + power-domains = <&CPU_PD7>; + power-domain-names = "psci"; qcom,freq-domain = <&cpufreq_hw 2>; operating-points-v2 = <&cpu7_opp_table>; interconnects = <&gem_noc MASTER_AMPSS_M0 &mc_virt SLAVE_EBI_CH0>, @@ -281,6 +297,42 @@ }; }; }; + + idle-states { + entry-method = "psci"; + + LITTLE_CPU_SLEEP_0: cpu-sleep-0-0 { + compatible = "arm,idle-state"; + idle-state-name = "silver-rail-power-collapse"; + arm,psci-suspend-param = <0x40000004>; + entry-latency-us = <360>; + exit-latency-us = <531>; + min-residency-us = <3934>; + local-timer-stop; + }; + + BIG_CPU_SLEEP_0: cpu-sleep-1-0 { + compatible = "arm,idle-state"; + idle-state-name = "gold-rail-power-collapse"; + arm,psci-suspend-param = <0x40000004>; + entry-latency-us = <702>; + exit-latency-us = <1061>; + min-residency-us = <4488>; + local-timer-stop; + }; + }; + + domain-idle-states { + CLUSTER_SLEEP_0: cluster-sleep-0 { + compatible = "domain-idle-state"; + idle-state-name = "cluster-llcc-off"; + arm,psci-suspend-param = <0x4100c244>; + entry-latency-us = <3264>; + exit-latency-us = <6562>; + min-residency-us = <9987>; + local-timer-stop; + }; + }; }; cpu0_opp_table: cpu0_opp_table { @@ -594,6 +646,59 @@ psci { compatible = "arm,psci-1.0"; method = "smc"; + + CPU_PD0: cpu0 { + #power-domain-cells = <0>; + power-domains = <&CLUSTER_PD>; + domain-idle-states = <&LITTLE_CPU_SLEEP_0>; + }; + + CPU_PD1: cpu1 { + #power-domain-cells = <0>; + power-domains = <&CLUSTER_PD>; + domain-idle-states = <&LITTLE_CPU_SLEEP_0>; + }; + + CPU_PD2: cpu2 { + #power-domain-cells = <0>; + power-domains = <&CLUSTER_PD>; + domain-idle-states = <&LITTLE_CPU_SLEEP_0>; + }; + + CPU_PD3: cpu3 { + #power-domain-cells = <0>; + power-domains = <&CLUSTER_PD>; + domain-idle-states = <&LITTLE_CPU_SLEEP_0>; + }; + + CPU_PD4: cpu4 { + #power-domain-cells = <0>; + power-domains = <&CLUSTER_PD>; + domain-idle-states = <&BIG_CPU_SLEEP_0>; + }; + + CPU_PD5: cpu5 { + #power-domain-cells = <0>; + power-domains = <&CLUSTER_PD>; + domain-idle-states = <&BIG_CPU_SLEEP_0>; + }; + + CPU_PD6: cpu6 { + #power-domain-cells = <0>; + power-domains = <&CLUSTER_PD>; + domain-idle-states = <&BIG_CPU_SLEEP_0>; + }; + + CPU_PD7: cpu7 { + #power-domain-cells = <0>; + power-domains = <&CLUSTER_PD>; + domain-idle-states = <&BIG_CPU_SLEEP_0>; + }; + + CLUSTER_PD: cpu-cluster0 { + #power-domain-cells = <0>; + domain-idle-states = <&CLUSTER_SLEEP_0>; + }; }; reserved-memory { @@ -1740,8 +1845,8 @@ phys = <&pcie0_lane>; phy-names = "pciephy"; - perst-gpio = <&tlmm 79 GPIO_ACTIVE_LOW>; - enable-gpio = <&tlmm 81 GPIO_ACTIVE_HIGH>; + perst-gpios = <&tlmm 79 GPIO_ACTIVE_LOW>; + wake-gpios = <&tlmm 81 GPIO_ACTIVE_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&pcie0_default_state>; @@ -1801,7 +1906,7 @@ ranges = <0x01000000 0x0 0x40200000 0x0 0x40200000 0x0 0x100000>, <0x02000000 0x0 0x40300000 0x0 0x40300000 0x0 0x1fd00000>; - interrupts = <GIC_SPI 306 IRQ_TYPE_EDGE_RISING>; + interrupts = <GIC_SPI 307 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "msi"; #interrupt-cells = <1>; interrupt-map-mask = <0 0 0 0x7>; @@ -1844,8 +1949,8 @@ phys = <&pcie1_lane>; phy-names = "pciephy"; - perst-gpio = <&tlmm 82 GPIO_ACTIVE_LOW>; - enable-gpio = <&tlmm 84 GPIO_ACTIVE_HIGH>; + perst-gpios = <&tlmm 82 GPIO_ACTIVE_LOW>; + wake-gpios = <&tlmm 84 GPIO_ACTIVE_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&pcie1_default_state>; @@ -1907,7 +2012,7 @@ ranges = <0x01000000 0x0 0x64200000 0x0 0x64200000 0x0 0x100000>, <0x02000000 0x0 0x64300000 0x0 0x64300000 0x0 0x3d00000>; - interrupts = <GIC_SPI 236 IRQ_TYPE_EDGE_RISING>; + interrupts = <GIC_SPI 243 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "msi"; #interrupt-cells = <1>; interrupt-map-mask = <0 0 0 0x7>; @@ -1950,8 +2055,8 @@ phys = <&pcie2_lane>; phy-names = "pciephy"; - perst-gpio = <&tlmm 85 GPIO_ACTIVE_LOW>; - enable-gpio = <&tlmm 87 GPIO_ACTIVE_HIGH>; + perst-gpios = <&tlmm 85 GPIO_ACTIVE_LOW>; + wake-gpios = <&tlmm 87 GPIO_ACTIVE_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&pcie2_default_state>; @@ -4320,7 +4425,7 @@ apr { compatible = "qcom,apr-v2"; qcom,glink-channels = "apr_audio_svc"; - qcom,apr-domain = <APR_DOMAIN_ADSP>; + qcom,domain = <APR_DOMAIN_ADSP>; #address-cells = <1>; #size-cells = <0>; @@ -4571,7 +4676,10 @@ clocks = <&rpmhcc RPMH_CXO_CLK>, <&gcc GPLL0>; clock-names = "xo", "alternate"; - + interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "dcvsh-irq-0", "dcvsh-irq-1", "dcvsh-irq-2"; #freq-domain-cells = <1>; }; }; @@ -5172,7 +5280,7 @@ }; }; - gpu-thermal-top { + gpu-top-thermal { polling-delay-passive = <250>; polling-delay = <1000>; @@ -5307,7 +5415,7 @@ }; }; - gpu-thermal-bottom { + gpu-bottom-thermal { polling-delay-passive = <250>; polling-delay = <1000>; diff --git a/arch/arm64/boot/dts/qcom/sm8350.dtsi b/arch/arm64/boot/dts/qcom/sm8350.dtsi index 4b19744bcfb3..d242bab69c2e 100644 --- a/arch/arm64/boot/dts/qcom/sm8350.dtsi +++ b/arch/arm64/boot/dts/qcom/sm8350.dtsi @@ -1443,6 +1443,8 @@ interconnect-names = "memory", "config"; + qcom,qmp = <&aoss_qmp>; + qcom,smem-states = <&ipa_smp2p_out 0>, <&ipa_smp2p_out 1>; qcom,smem-state-names = "ipa-clock-enabled-valid", @@ -1820,7 +1822,7 @@ qcom,tcs-offset = <0xd00>; qcom,drv-id = <2>; qcom,tcs-config = <ACTIVE_TCS 2>, <SLEEP_TCS 3>, - <WAKE_TCS 3>, <CONTROL_TCS 1>; + <WAKE_TCS 3>, <CONTROL_TCS 0>; rpmhcc: clock-controller { compatible = "qcom,sm8350-rpmh-clk"; @@ -3009,7 +3011,7 @@ }; }; - gpu-thermal-top { + gpu-top-thermal { polling-delay-passive = <250>; polling-delay = <1000>; @@ -3024,7 +3026,7 @@ }; }; - gpu-thermal-bottom { + gpu-bottom-thermal { polling-delay-passive = <250>; polling-delay = <1000>; @@ -3114,7 +3116,7 @@ }; }; - modem1-thermal-top { + modem1-top-thermal { polling-delay-passive = <250>; polling-delay = <1000>; @@ -3129,7 +3131,7 @@ }; }; - modem2-thermal-top { + modem2-top-thermal { polling-delay-passive = <250>; polling-delay = <1000>; @@ -3144,7 +3146,7 @@ }; }; - modem3-thermal-top { + modem3-top-thermal { polling-delay-passive = <250>; polling-delay = <1000>; @@ -3159,7 +3161,7 @@ }; }; - modem4-thermal-top { + modem4-top-thermal { polling-delay-passive = <250>; polling-delay = <1000>; @@ -3174,7 +3176,7 @@ }; }; - camera-thermal-top { + camera-top-thermal { polling-delay-passive = <250>; polling-delay = <1000>; @@ -3189,7 +3191,7 @@ }; }; - cam-thermal-bottom { + cam-bottom-thermal { polling-delay-passive = <250>; polling-delay = <1000>; diff --git a/arch/arm64/boot/dts/qcom/sm8450-hdk.dts b/arch/arm64/boot/dts/qcom/sm8450-hdk.dts new file mode 100644 index 000000000000..f0fcb1428449 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/sm8450-hdk.dts @@ -0,0 +1,405 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * Copyright (c) 2022, Linaro Limited + */ + +/dts-v1/; + +#include <dt-bindings/regulator/qcom,rpmh-regulator.h> +#include "sm8450.dtsi" + +/ { + model = "Qualcomm Technologies, Inc. SM8450 HDK"; + compatible = "qcom,sm8450-hdk", "qcom,sm8450"; + + aliases { + serial0 = &uart7; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + vph_pwr: vph-pwr-regulator { + compatible = "regulator-fixed"; + regulator-name = "vph_pwr"; + regulator-min-microvolt = <3700000>; + regulator-max-microvolt = <3700000>; + + regulator-always-on; + regulator-boot-on; + }; +}; + +&apps_rsc { + pm8350-rpmh-regulators { + compatible = "qcom,pm8350-rpmh-regulators"; + qcom,pmic-id = "b"; + + vdd-s1-supply = <&vph_pwr>; + vdd-s2-supply = <&vph_pwr>; + vdd-s3-supply = <&vph_pwr>; + vdd-s4-supply = <&vph_pwr>; + vdd-s5-supply = <&vph_pwr>; + vdd-s6-supply = <&vph_pwr>; + vdd-s7-supply = <&vph_pwr>; + vdd-s8-supply = <&vph_pwr>; + vdd-s9-supply = <&vph_pwr>; + vdd-s10-supply = <&vph_pwr>; + vdd-s11-supply = <&vph_pwr>; + vdd-s12-supply = <&vph_pwr>; + + vdd-l1-l4-supply = <&vreg_s11b_0p95>; + vdd-l2-l7-supply = <&vreg_bob>; + vdd-l3-l5-supply = <&vreg_bob>; + vdd-l6-l9-l10-supply = <&vreg_s12b_1p25>; + vdd-l8-supply = <&vreg_s2h_0p95>; + + vreg_s10b_1p8: smps10 { + regulator-name = "vreg_s10b_1p8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + vreg_s11b_0p95: smps11 { + regulator-name = "vreg_s11b_0p95"; + regulator-min-microvolt = <966000>; + regulator-max-microvolt = <1104000>; + }; + + vreg_s12b_1p25: smps12 { + regulator-name = "vreg_s12b_1p25"; + regulator-min-microvolt = <1350000>; + regulator-max-microvolt = <1400000>; + }; + + vreg_l1b_0p91: ldo1 { + regulator-name = "vreg_l1b_0p91"; + regulator-min-microvolt = <912000>; + regulator-max-microvolt = <920000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l2b_3p07: ldo2 { + regulator-name = "vreg_l2b_3p07"; + regulator-min-microvolt = <3072000>; + regulator-max-microvolt = <3072000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l3b_0p9: ldo3 { + regulator-name = "vreg_l3b_0p9"; + regulator-min-microvolt = <904000>; + regulator-max-microvolt = <904000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l5b_0p88: ldo5 { + regulator-name = "vreg_l5b_0p88"; + regulator-min-microvolt = <880000>; + regulator-max-microvolt = <888000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l6b_1p2: ldo6 { + regulator-name = "vreg_l6b_1p2"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l7b_2p5: ldo7 { + regulator-name = "vreg_l7b_2p5"; + regulator-min-microvolt = <2504000>; + regulator-max-microvolt = <2504000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l9b_1p2: ldo9 { + regulator-name = "vreg_l9b_1p2"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + }; + + pm8350c-rpmh-regulators { + compatible = "qcom,pm8350c-rpmh-regulators"; + qcom,pmic-id = "c"; + + vdd-s1-supply = <&vph_pwr>; + vdd-s2-supply = <&vph_pwr>; + vdd-s3-supply = <&vph_pwr>; + vdd-s4-supply = <&vph_pwr>; + vdd-s5-supply = <&vph_pwr>; + vdd-s6-supply = <&vph_pwr>; + vdd-s7-supply = <&vph_pwr>; + vdd-s8-supply = <&vph_pwr>; + vdd-s9-supply = <&vph_pwr>; + vdd-s10-supply = <&vph_pwr>; + + vdd-l1-l12-supply = <&vreg_bob>; + vdd-l2-l8-supply = <&vreg_bob>; + vdd-l3-l4-l5-l7-l13-supply = <&vreg_bob>; + vdd-l6-l9-l11-supply = <&vreg_bob>; + vdd-l10-supply = <&vreg_s12b_1p25>; + + vdd-bob-supply = <&vph_pwr>; + + vreg_s1c_1p86: smps1 { + regulator-name = "vreg_s1c_1p86"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2024000>; + }; + + vreg_s10c_1p05: smps10 { + regulator-name = "vreg_s10c_1p05"; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1100000>; + }; + + vreg_bob: bob { + regulator-name = "vreg_bob"; + regulator-min-microvolt = <3008000>; + regulator-max-microvolt = <3960000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_AUTO>; + }; + + vreg_l1c_1p8: ldo1 { + regulator-name = "vreg_l1c_1p8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l3c_3p0: ldo3 { + regulator-name = "vreg_l3c_3p0"; + regulator-min-microvolt = <3296000>; + regulator-max-microvolt = <3304000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l4c_1p8: ldo4 { + regulator-name = "vreg_l4c_1p8"; + regulator-min-microvolt = <1704000>; + regulator-max-microvolt = <3000000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l5c_1p8: ldo5 { + regulator-name = "vreg_l5c_1p8"; + regulator-min-microvolt = <1704000>; + regulator-max-microvolt = <3000000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l6c_1p8: ldo6 { + regulator-name = "vreg_l6c_1p8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3008000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l7c_3p0: ldo7 { + regulator-name = "vreg_l7c_3p0"; + regulator-min-microvolt = <3008000>; + regulator-max-microvolt = <3008000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l8c_1p8: ldo8 { + regulator-name = "vreg_l8c_1p8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l9c_2p96: ldo9 { + regulator-name = "vreg_l9c_2p96"; + regulator-min-microvolt = <2960000>; + regulator-max-microvolt = <3008000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l12c_1p8: ldo12 { + regulator-name = "vreg_l12c_1p8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1968000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l13c_3p0: ldo13 { + regulator-name = "vreg_l13c_3p0"; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + }; + + pm8450-rpmh-regulators { + compatible = "qcom,pm8450-rpmh-regulators"; + qcom,pmic-id = "h"; + + vdd-s1-supply = <&vph_pwr>; + vdd-s2-supply = <&vph_pwr>; + vdd-s3-supply = <&vph_pwr>; + vdd-s4-supply = <&vph_pwr>; + vdd-s5-supply = <&vph_pwr>; + vdd-s6-supply = <&vph_pwr>; + + vdd-l2-supply = <&vreg_bob>; + vdd-l3-supply = <&vreg_bob>; + vdd-l4-supply = <&vreg_bob>; + + vreg_s2h_0p95: smps2 { + regulator-name = "vreg_s2h_0p95"; + regulator-min-microvolt = <848000>; + regulator-max-microvolt = <1104000>; + }; + + vreg_s3h_0p5: smps3 { + regulator-name = "vreg_s3h_0p5"; + regulator-min-microvolt = <500000>; + regulator-max-microvolt = <500000>; + }; + + vreg_l2h_0p91: ldo2 { + regulator-name = "vreg_l2h_0p91"; + regulator-min-microvolt = <880000>; + regulator-max-microvolt = <912000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l3h_0p91: ldo3 { + regulator-name = "vreg_l3h_0p91"; + regulator-min-microvolt = <912000>; + regulator-max-microvolt = <912000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + }; + + pmr735a-rpmh-regulators { + compatible = "qcom,pmr735a-rpmh-regulators"; + qcom,pmic-id = "e"; + + vdd-s1-supply = <&vph_pwr>; + vdd-s2-supply = <&vph_pwr>; + vdd-s3-supply = <&vph_pwr>; + + vdd-l1-l2-supply = <&vreg_s2e_0p85>; + vdd-l3-supply = <&vreg_s1e_1p25>; + vdd-l4-supply = <&vreg_s1c_1p86>; + vdd-l5-l6-supply = <&vreg_s1c_1p86>; + vdd-l7-bob-supply = <&vreg_bob>; + + vreg_s1e_1p25: smps1 { + regulator-name = "vreg_s1e_1p25"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1296000>; + }; + + vreg_s2e_0p85: smps2 { + regulator-name = "vreg_s2e_0p85"; + regulator-min-microvolt = <500000>; + regulator-max-microvolt = <1040000>; + }; + + vreg_l1e_0p8: ldo1 { + regulator-name = "vreg_l1e_0p8"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <800000>; + }; + + vreg_l2e_0p8: ldo2 { + regulator-name = "vreg_l2e_0p8"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <800000>; + }; + + vreg_l3e_1p2: ldo3 { + regulator-name = "vreg_l3e_1p2"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + }; + + vreg_l4e_1p7: ldo4 { + regulator-name = "vreg_l4e_1p7"; + regulator-min-microvolt = <1776000>; + regulator-max-microvolt = <1776000>; + }; + + vreg_l5e_0p88: ldo5 { + regulator-name = "vreg_l5e_0p88"; + regulator-min-microvolt = <880000>; + regulator-max-microvolt = <880000>; + }; + + vreg_l6e_1p2: ldo6 { + regulator-name = "vreg_l6e_1p2"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + }; + + vreg_l7e_2p8: ldo7 { + regulator-name = "vreg_l7e_2p8"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + }; + }; +}; + +&qupv3_id_0 { + status = "okay"; +}; + +&tlmm { + gpio-reserved-ranges = <28 4>, <36 4>; +}; + +&uart7 { + status = "okay"; +}; + +&ufs_mem_hc { + status = "okay"; + + reset-gpios = <&tlmm 210 GPIO_ACTIVE_LOW>; + + vcc-supply = <&vreg_l7b_2p5>; + vcc-max-microamp = <1100000>; + vccq-supply = <&vreg_l9b_1p2>; + vccq-max-microamp = <1200000>; +}; + +&ufs_mem_phy { + status = "okay"; + + vdda-phy-supply = <&vreg_l5b_0p88>; + vdda-pll-supply = <&vreg_l6b_1p2>; + vdda-max-microamp = <173000>; + vdda-pll-max-microamp = <24900>; +}; + +&usb_1 { + status = "okay"; +}; + +&usb_1_dwc3 { + dr_mode = "peripheral"; +}; + +&usb_1_hsphy { + status = "okay"; + + vdda-pll-supply = <&vreg_l5b_0p88>; + vdda18-supply = <&vreg_l1c_1p8>; + vdda33-supply = <&vreg_l2b_3p07>; +}; + +&usb_1_qmpphy { + status = "okay"; + + vdda-phy-supply = <&vreg_l6b_1p2>; + vdda-pll-supply = <&vreg_l1b_0p91>; +}; diff --git a/arch/arm64/boot/dts/qcom/sm8450-qrd.dts b/arch/arm64/boot/dts/qcom/sm8450-qrd.dts index b68ab247e6ae..9526632d4029 100644 --- a/arch/arm64/boot/dts/qcom/sm8450-qrd.dts +++ b/arch/arm64/boot/dts/qcom/sm8450-qrd.dts @@ -346,6 +346,26 @@ status = "okay"; }; +&remoteproc_adsp { + status = "okay"; + firmware-name = "qcom/sm8450/adsp.mbn"; +}; + +&remoteproc_cdsp { + status = "okay"; + firmware-name = "qcom/sm8450/cdsp.mbn"; +}; + +&remoteproc_mpss { + status = "okay"; + firmware-name = "qcom/sm8450/modem.mbn"; +}; + +&remoteproc_slpi { + status = "okay"; + firmware-name = "qcom/sm8450/slpi.mbn"; +}; + &tlmm { gpio-reserved-ranges = <28 4>, <36 4>; }; diff --git a/arch/arm64/boot/dts/qcom/sm8450.dtsi b/arch/arm64/boot/dts/qcom/sm8450.dtsi index 02b97e838c47..934e29b9e153 100644 --- a/arch/arm64/boot/dts/qcom/sm8450.dtsi +++ b/arch/arm64/boot/dts/qcom/sm8450.dtsi @@ -7,7 +7,9 @@ #include <dt-bindings/clock/qcom,gcc-sm8450.h> #include <dt-bindings/clock/qcom,rpmh.h> #include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/mailbox/qcom-ipcc.h> #include <dt-bindings/power/qcom-rpmpd.h> +#include <dt-bindings/interconnect/qcom,sm8450.h> #include <dt-bindings/soc/qcom,rpmh-rsc.h> / { @@ -203,9 +205,9 @@ compatible = "arm,idle-state"; idle-state-name = "silver-rail-power-collapse"; arm,psci-suspend-param = <0x40000004>; - entry-latency-us = <274>; - exit-latency-us = <480>; - min-residency-us = <3934>; + entry-latency-us = <800>; + exit-latency-us = <750>; + min-residency-us = <4090>; local-timer-stop; }; @@ -213,9 +215,9 @@ compatible = "arm,idle-state"; idle-state-name = "gold-rail-power-collapse"; arm,psci-suspend-param = <0x40000004>; - entry-latency-us = <327>; - exit-latency-us = <1502>; - min-residency-us = <4488>; + entry-latency-us = <600>; + exit-latency-us = <1550>; + min-residency-us = <4791>; local-timer-stop; }; }; @@ -224,10 +226,10 @@ CLUSTER_SLEEP_0: cluster-sleep-0 { compatible = "domain-idle-state"; idle-state-name = "cluster-l3-off"; - arm,psci-suspend-param = <0x4100c344>; - entry-latency-us = <584>; - exit-latency-us = <2332>; - min-residency-us = <6118>; + arm,psci-suspend-param = <0x41000044>; + entry-latency-us = <1050>; + exit-latency-us = <2500>; + min-residency-us = <5309>; local-timer-stop; }; @@ -235,9 +237,9 @@ compatible = "domain-idle-state"; idle-state-name = "cluster-power-collapse"; arm,psci-suspend-param = <0x4100c344>; - entry-latency-us = <2893>; - exit-latency-us = <4023>; - min-residency-us = <9987>; + entry-latency-us = <2700>; + exit-latency-us = <3500>; + min-residency-us = <13959>; local-timer-stop; }; }; @@ -250,6 +252,18 @@ }; }; + clk_virt: interconnect@0 { + compatible = "qcom,sm8450-clk-virt"; + #interconnect-cells = <2>; + qcom,bcm-voters = <&apps_bcm_voter>; + }; + + mc_virt: interconnect@1 { + compatible = "qcom,sm8450-mc-virt"; + #interconnect-cells = <2>; + qcom,bcm-voters = <&apps_bcm_voter>; + }; + memory@a0000000 { device_type = "memory"; /* We expect the bootloader to fill in the size */ @@ -315,7 +329,7 @@ CLUSTER_PD: cpu-cluster0 { #power-domain-cells = <0>; - domain-idle-states = <&CLUSTER_SLEEP_0>; + domain-idle-states = <&CLUSTER_SLEEP_0>, <&CLUSTER_SLEEP_1>; }; }; @@ -460,6 +474,15 @@ no-map; }; + rmtfs_mem: memory@9fd00000 { + compatible = "qcom,rmtfs-mem"; + reg = <0x0 0x9fd00000 0x0 0x280000>; + no-map; + + qcom,client-id = <1>; + qcom,vmid = <15>; + }; + global_sync_mem: memory@a6f00000 { reg = <0x0 0xa6f00000 0x0 0x100000>; no-map; @@ -540,6 +563,113 @@ }; }; + smp2p-adsp { + compatible = "qcom,smp2p"; + qcom,smem = <443>, <429>; + interrupts-extended = <&ipcc IPCC_CLIENT_LPASS + IPCC_MPROC_SIGNAL_SMP2P + IRQ_TYPE_EDGE_RISING>; + mboxes = <&ipcc IPCC_CLIENT_LPASS + IPCC_MPROC_SIGNAL_SMP2P>; + + qcom,local-pid = <0>; + qcom,remote-pid = <2>; + + smp2p_adsp_out: master-kernel { + qcom,entry-name = "master-kernel"; + #qcom,smem-state-cells = <1>; + }; + + smp2p_adsp_in: slave-kernel { + qcom,entry-name = "slave-kernel"; + interrupt-controller; + #interrupt-cells = <2>; + }; + }; + + smp2p-cdsp { + compatible = "qcom,smp2p"; + qcom,smem = <94>, <432>; + interrupts-extended = <&ipcc IPCC_CLIENT_CDSP + IPCC_MPROC_SIGNAL_SMP2P + IRQ_TYPE_EDGE_RISING>; + mboxes = <&ipcc IPCC_CLIENT_CDSP + IPCC_MPROC_SIGNAL_SMP2P>; + + qcom,local-pid = <0>; + qcom,remote-pid = <5>; + + smp2p_cdsp_out: master-kernel { + qcom,entry-name = "master-kernel"; + #qcom,smem-state-cells = <1>; + }; + + smp2p_cdsp_in: slave-kernel { + qcom,entry-name = "slave-kernel"; + interrupt-controller; + #interrupt-cells = <2>; + }; + }; + + smp2p-modem { + compatible = "qcom,smp2p"; + qcom,smem = <435>, <428>; + interrupts-extended = <&ipcc IPCC_CLIENT_MPSS + IPCC_MPROC_SIGNAL_SMP2P + IRQ_TYPE_EDGE_RISING>; + mboxes = <&ipcc IPCC_CLIENT_MPSS + IPCC_MPROC_SIGNAL_SMP2P>; + + qcom,local-pid = <0>; + qcom,remote-pid = <1>; + + smp2p_modem_out: master-kernel { + qcom,entry-name = "master-kernel"; + #qcom,smem-state-cells = <1>; + }; + + smp2p_modem_in: slave-kernel { + qcom,entry-name = "slave-kernel"; + interrupt-controller; + #interrupt-cells = <2>; + }; + + ipa_smp2p_out: ipa-ap-to-modem { + qcom,entry-name = "ipa"; + #qcom,smem-state-cells = <1>; + }; + + ipa_smp2p_in: ipa-modem-to-ap { + qcom,entry-name = "ipa"; + interrupt-controller; + #interrupt-cells = <2>; + }; + }; + + smp2p-slpi { + compatible = "qcom,smp2p"; + qcom,smem = <481>, <430>; + interrupts-extended = <&ipcc IPCC_CLIENT_SLPI + IPCC_MPROC_SIGNAL_SMP2P + IRQ_TYPE_EDGE_RISING>; + mboxes = <&ipcc IPCC_CLIENT_SLPI + IPCC_MPROC_SIGNAL_SMP2P>; + + qcom,local-pid = <0>; + qcom,remote-pid = <3>; + + smp2p_slpi_out: master-kernel { + qcom,entry-name = "master-kernel"; + #qcom,smem-state-cells = <1>; + }; + + smp2p_slpi_in: slave-kernel { + qcom,entry-name = "slave-kernel"; + interrupt-controller; + #interrupt-cells = <2>; + }; + }; + soc: soc@0 { #address-cells = <2>; #size-cells = <2>; @@ -620,6 +750,54 @@ }; }; + config_noc: interconnect@1500000 { + compatible = "qcom,sm8450-config-noc"; + reg = <0 0x01500000 0 0x1c000>; + #interconnect-cells = <2>; + qcom,bcm-voters = <&apps_bcm_voter>; + }; + + system_noc: interconnect@1680000 { + compatible = "qcom,sm8450-system-noc"; + reg = <0 0x01680000 0 0x1e200>; + #interconnect-cells = <2>; + qcom,bcm-voters = <&apps_bcm_voter>; + }; + + pcie_noc: interconnect@16c0000 { + compatible = "qcom,sm8450-pcie-anoc"; + reg = <0 0x016c0000 0 0xe280>; + #interconnect-cells = <2>; + qcom,bcm-voters = <&apps_bcm_voter>; + }; + + aggre1_noc: interconnect@16e0000 { + compatible = "qcom,sm8450-aggre1-noc"; + reg = <0 0x016e0000 0 0x1c080>; + #interconnect-cells = <2>; + clocks = <&gcc GCC_AGGRE_UFS_PHY_AXI_CLK>, + <&gcc GCC_AGGRE_USB3_PRIM_AXI_CLK>; + qcom,bcm-voters = <&apps_bcm_voter>; + }; + + aggre2_noc: interconnect@1700000 { + compatible = "qcom,sm8450-aggre2-noc"; + reg = <0 0x01700000 0 0x31080>; + #interconnect-cells = <2>; + qcom,bcm-voters = <&apps_bcm_voter>; + clocks = <&gcc GCC_AGGRE_NOC_PCIE_0_AXI_CLK>, + <&gcc GCC_AGGRE_NOC_PCIE_1_AXI_CLK>, + <&gcc GCC_AGGRE_UFS_PHY_AXI_CLK>, + <&rpmhcc RPMH_IPA_CLK>; + }; + + mmss_noc: interconnect@1740000 { + compatible = "qcom,sm8450-mmss-noc"; + reg = <0 0x01740000 0 0x1f080>; + #interconnect-cells = <2>; + qcom,bcm-voters = <&apps_bcm_voter>; + }; + tcsr_mutex: hwlock@1f40000 { compatible = "qcom,tcsr-mutex"; reg = <0x0 0x01f40000 0x0 0x40000>; @@ -672,6 +850,167 @@ }; }; + remoteproc_slpi: remoteproc@2400000 { + compatible = "qcom,sm8450-slpi-pas"; + reg = <0 0x02400000 0 0x4000>; + + interrupts-extended = <&pdc 9 IRQ_TYPE_LEVEL_HIGH>, + <&smp2p_slpi_in 0 IRQ_TYPE_EDGE_RISING>, + <&smp2p_slpi_in 1 IRQ_TYPE_EDGE_RISING>, + <&smp2p_slpi_in 2 IRQ_TYPE_EDGE_RISING>, + <&smp2p_slpi_in 3 IRQ_TYPE_EDGE_RISING>; + interrupt-names = "wdog", "fatal", "ready", + "handover", "stop-ack"; + + clocks = <&rpmhcc RPMH_CXO_CLK>; + clock-names = "xo"; + + power-domains = <&rpmhpd SM8450_LCX>, + <&rpmhpd SM8450_LMX>; + power-domain-names = "lcx", "lmx"; + + memory-region = <&slpi_mem>; + + qcom,qmp = <&aoss_qmp>; + + qcom,smem-states = <&smp2p_slpi_out 0>; + qcom,smem-state-names = "stop"; + + status = "disabled"; + + glink-edge { + interrupts-extended = <&ipcc IPCC_CLIENT_SLPI + IPCC_MPROC_SIGNAL_GLINK_QMP + IRQ_TYPE_EDGE_RISING>; + mboxes = <&ipcc IPCC_CLIENT_SLPI + IPCC_MPROC_SIGNAL_GLINK_QMP>; + + label = "slpi"; + qcom,remote-pid = <3>; + }; + }; + + remoteproc_adsp: remoteproc@30000000 { + compatible = "qcom,sm8450-adsp-pas"; + reg = <0 0x030000000 0 0x100>; + + interrupts-extended = <&pdc 6 IRQ_TYPE_LEVEL_HIGH>, + <&smp2p_adsp_in 0 IRQ_TYPE_EDGE_RISING>, + <&smp2p_adsp_in 1 IRQ_TYPE_EDGE_RISING>, + <&smp2p_adsp_in 2 IRQ_TYPE_EDGE_RISING>, + <&smp2p_adsp_in 3 IRQ_TYPE_EDGE_RISING>; + interrupt-names = "wdog", "fatal", "ready", + "handover", "stop-ack"; + + clocks = <&rpmhcc RPMH_CXO_CLK>; + clock-names = "xo"; + + power-domains = <&rpmhpd SM8450_LCX>, + <&rpmhpd SM8450_LMX>; + power-domain-names = "lcx", "lmx"; + + memory-region = <&adsp_mem>; + + qcom,qmp = <&aoss_qmp>; + + qcom,smem-states = <&smp2p_adsp_out 0>; + qcom,smem-state-names = "stop"; + + status = "disabled"; + + remoteproc_adsp_glink: glink-edge { + interrupts-extended = <&ipcc IPCC_CLIENT_LPASS + IPCC_MPROC_SIGNAL_GLINK_QMP + IRQ_TYPE_EDGE_RISING>; + mboxes = <&ipcc IPCC_CLIENT_LPASS + IPCC_MPROC_SIGNAL_GLINK_QMP>; + + label = "lpass"; + qcom,remote-pid = <2>; + }; + }; + + remoteproc_cdsp: remoteproc@32300000 { + compatible = "qcom,sm8450-cdsp-pas"; + reg = <0 0x032300000 0 0x1400000>; + + interrupts-extended = <&intc GIC_SPI 578 IRQ_TYPE_LEVEL_HIGH>, + <&smp2p_cdsp_in 0 IRQ_TYPE_EDGE_RISING>, + <&smp2p_cdsp_in 1 IRQ_TYPE_EDGE_RISING>, + <&smp2p_cdsp_in 2 IRQ_TYPE_EDGE_RISING>, + <&smp2p_cdsp_in 3 IRQ_TYPE_EDGE_RISING>; + interrupt-names = "wdog", "fatal", "ready", + "handover", "stop-ack"; + + clocks = <&rpmhcc RPMH_CXO_CLK>; + clock-names = "xo"; + + power-domains = <&rpmhpd SM8450_CX>, + <&rpmhpd SM8450_MXC>; + power-domain-names = "cx", "mxc"; + + memory-region = <&cdsp_mem>; + + qcom,qmp = <&aoss_qmp>; + + qcom,smem-states = <&smp2p_cdsp_out 0>; + qcom,smem-state-names = "stop"; + + status = "disabled"; + + glink-edge { + interrupts-extended = <&ipcc IPCC_CLIENT_CDSP + IPCC_MPROC_SIGNAL_GLINK_QMP + IRQ_TYPE_EDGE_RISING>; + mboxes = <&ipcc IPCC_CLIENT_CDSP + IPCC_MPROC_SIGNAL_GLINK_QMP>; + + label = "cdsp"; + qcom,remote-pid = <5>; + }; + }; + + remoteproc_mpss: remoteproc@4080000 { + compatible = "qcom,sm8450-mpss-pas"; + reg = <0x0 0x04080000 0x0 0x4040>; + + interrupts-extended = <&intc GIC_SPI 264 IRQ_TYPE_LEVEL_HIGH>, + <&smp2p_modem_in 0 IRQ_TYPE_EDGE_RISING>, + <&smp2p_modem_in 1 IRQ_TYPE_EDGE_RISING>, + <&smp2p_modem_in 2 IRQ_TYPE_EDGE_RISING>, + <&smp2p_modem_in 3 IRQ_TYPE_EDGE_RISING>, + <&smp2p_modem_in 7 IRQ_TYPE_EDGE_RISING>; + interrupt-names = "wdog", "fatal", "ready", "handover", + "stop-ack", "shutdown-ack"; + + clocks = <&rpmhcc RPMH_CXO_CLK>; + clock-names = "xo"; + + power-domains = <&rpmhpd 0>, + <&rpmhpd 12>; + power-domain-names = "cx", "mss"; + + memory-region = <&mpss_mem>; + + qcom,qmp = <&aoss_qmp>; + + qcom,smem-states = <&smp2p_modem_out 0>; + qcom,smem-state-names = "stop"; + + status = "disabled"; + + glink-edge { + interrupts-extended = <&ipcc IPCC_CLIENT_MPSS + IPCC_MPROC_SIGNAL_GLINK_QMP + IRQ_TYPE_EDGE_RISING>; + mboxes = <&ipcc IPCC_CLIENT_MPSS + IPCC_MPROC_SIGNAL_GLINK_QMP>; + interrupts = <GIC_SPI 449 IRQ_TYPE_EDGE_RISING>; + label = "modem"; + qcom,remote-pid = <1>; + }; + }; + pdc: interrupt-controller@b220000 { compatible = "qcom,sm8450-pdc", "qcom,pdc"; reg = <0 0x0b220000 0 0x30000>, <0 0x174000f0 0 0x64>; @@ -682,6 +1021,25 @@ interrupt-controller; }; + aoss_qmp: power-controller@c300000 { + compatible = "qcom,sm8450-aoss-qmp", "qcom,aoss-qmp"; + reg = <0 0x0c300000 0 0x400>; + interrupts-extended = <&ipcc IPCC_CLIENT_AOP IPCC_MPROC_SIGNAL_GLINK_QMP + IRQ_TYPE_EDGE_RISING>; + mboxes = <&ipcc IPCC_CLIENT_AOP IPCC_MPROC_SIGNAL_GLINK_QMP>; + + #clock-cells = <0>; + }; + + ipcc: mailbox@ed18000 { + compatible = "qcom,sm8450-ipcc", "qcom,ipcc"; + reg = <0 0x0ed18000 0 0x1000>; + interrupts = <GIC_SPI 229 IRQ_TYPE_LEVEL_HIGH>; + interrupt-controller; + #interrupt-cells = <3>; + #mbox-cells = <2>; + }; + tlmm: pinctrl@f100000 { compatible = "qcom,sm8450-tlmm"; reg = <0 0x0f100000 0 0x300000>; @@ -989,6 +1347,20 @@ #freq-domain-cells = <1>; }; + gem_noc: interconnect@19100000 { + compatible = "qcom,sm8450-gem-noc"; + reg = <0 0x19100000 0 0xbb800>; + #interconnect-cells = <2>; + qcom,bcm-voters = <&apps_bcm_voter>; + }; + + system-cache-controller@19200000 { + compatible = "qcom,sm8450-llcc"; + reg = <0 0x19200000 0 0x580000>, <0 0x19a00000 0 0x80000>; + reg-names = "llcc_base", "llcc_broadcast_base"; + interrupts = <GIC_SPI 266 IRQ_TYPE_LEVEL_HIGH>; + }; + ufs_mem_hc: ufshc@1d84000 { compatible = "qcom,sm8450-ufshc", "qcom,ufshc", "jedec,ufs-2.0"; @@ -1005,6 +1377,9 @@ iommus = <&apps_smmu 0xe0 0x0>; + interconnects = <&aggre1_noc MASTER_UFS_MEM &mc_virt SLAVE_EBI1>, + <&gem_noc MASTER_APPSS_PROC &config_noc SLAVE_UFS_MEM_CFG>; + interconnect-names = "ufs-ddr", "cpu-ufs"; clock-names = "core_clk", "bus_aggr_clk", @@ -1104,6 +1479,20 @@ phy-names = "usb2-phy", "usb3-phy"; }; }; + + nsp_noc: interconnect@320c0000 { + compatible = "qcom,sm8450-nsp-noc"; + reg = <0 0x320c0000 0 0x10000>; + #interconnect-cells = <2>; + qcom,bcm-voters = <&apps_bcm_voter>; + }; + + lpass_ag_noc: interconnect@3c40000 { + compatible = "qcom,sm8450-lpass-ag-noc"; + reg = <0 0x3c40000 0 0x17200>; + #interconnect-cells = <2>; + qcom,bcm-voters = <&apps_bcm_voter>; + }; }; timer { diff --git a/arch/arm64/boot/dts/renesas/Makefile b/arch/arm64/boot/dts/renesas/Makefile index 5bc8065a7864..d000f6b131dc 100644 --- a/arch/arm64/boot/dts/renesas/Makefile +++ b/arch/arm64/boot/dts/renesas/Makefile @@ -75,4 +75,7 @@ dtb-$(CONFIG_ARCH_R8A77961) += r8a779m3-ulcb-kf.dtb dtb-$(CONFIG_ARCH_R8A77965) += r8a779m5-salvator-xs.dtb +dtb-$(CONFIG_ARCH_R9A07G044) += r9a07g044c2-smarc.dtb dtb-$(CONFIG_ARCH_R9A07G044) += r9a07g044l2-smarc.dtb + +dtb-$(CONFIG_ARCH_R9A07G054) += r9a07g054l2-smarc.dtb diff --git a/arch/arm64/boot/dts/renesas/beacon-renesom-baseboard.dtsi b/arch/arm64/boot/dts/renesas/beacon-renesom-baseboard.dtsi index 2692cc64bff6..5ad6cd1864c1 100644 --- a/arch/arm64/boot/dts/renesas/beacon-renesom-baseboard.dtsi +++ b/arch/arm64/boot/dts/renesas/beacon-renesom-baseboard.dtsi @@ -359,11 +359,10 @@ clocks = <&x304_clk>; clock-names = "xin"; - assigned-clocks = <&versaclock6_bb 1>, - <&versaclock6_bb 2>, - <&versaclock6_bb 3>, - <&versaclock6_bb 4>; - assigned-clock-rates = <24000000>, <24000000>, <24000000>, <24576000>; + assigned-clocks = <&versaclock6_bb 1>, <&versaclock6_bb 2>, + <&versaclock6_bb 3>, <&versaclock6_bb 4>; + assigned-clock-rates = <24000000>, <24000000>, <24000000>, + <24576000>; OUT1 { idt,mode = <VC5_CMOS>; diff --git a/arch/arm64/boot/dts/renesas/beacon-renesom-som.dtsi b/arch/arm64/boot/dts/renesas/beacon-renesom-som.dtsi index 0d136809eb96..877d076ffcc9 100644 --- a/arch/arm64/boot/dts/renesas/beacon-renesom-som.dtsi +++ b/arch/arm64/boot/dts/renesas/beacon-renesom-som.dtsi @@ -77,7 +77,7 @@ }; &gpio6 { - usb_hub_reset { + usb-hub-reset-hog { gpio-hog; gpios = <10 GPIO_ACTIVE_HIGH>; output-high; @@ -293,7 +293,6 @@ vqmmc-supply = <®_1p8v>; non-removable; cap-power-off-card; - pm-ignore-notify; keep-power-in-suspend; mmc-pwrseq = <&wlan_pwrseq>; status = "okay"; diff --git a/arch/arm64/boot/dts/renesas/gmsl-cameras.dtsi b/arch/arm64/boot/dts/renesas/gmsl-cameras.dtsi new file mode 100644 index 000000000000..d45f072f8cdf --- /dev/null +++ b/arch/arm64/boot/dts/renesas/gmsl-cameras.dtsi @@ -0,0 +1,332 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * Copyright (C) 2017 Ideas on Board <kieran.bingham@ideasonboard.com> + * Copyright (C) 2021 Jacopo Mondi <jacopo+renesas@jmondi.org> + * + * Device Tree Source (overlay) that describes GMSL camera connected to + * Fakra connectors for the Eagle V3M and Condor V3H (and compatible) boards. + * + * The following cameras are currently supported: RDACM20 and RDACM21. + * + * The board .dts file that include this has to select which cameras are in use + * by specifying the camera model with: + * + * #define GMSL_CAMERA_RDACM20 + * or + * #define GMSL_CAMERA_RDACM21 + * + * And which cameras are connected to the board by defining: + * for GMSL channel 0: + * #define GMSL_CAMERA_0 + * #define GMSL_CAMERA_1 + * #define GMSL_CAMERA_2 + * #define GMSL_CAMERA_3 + * + * for GMSL channel 1: + * #define GMSL_CAMERA_4 + * #define GMSL_CAMERA_5 + * #define GMSL_CAMERA_6 + * #define GMSL_CAMERA_7 + */ + +#include <dt-bindings/gpio/gpio.h> + +/* Validate the board file settings. */ +#if !defined(GMSL_CAMERA_RDACM20) && !defined(GMSL_CAMERA_RDACM21) +#error "Camera model should be defined by the board file" +#endif + +#if defined(GMSL_CAMERA_RDACM20) && defined(GMSL_CAMERA_RDACM21) +#error "A single camera model should be selected" +#endif + +#if !defined(GMSL_CAMERA_0) && !defined(GMSL_CAMERA_1) && \ + !defined(GMSL_CAMERA_2) && !defined(GMSL_CAMERA_3) && \ + !defined(GMSL_CAMERA_4) && !defined(GMSL_CAMERA_5) && \ + !defined(GMSL_CAMERA_6) && !defined(GMSL_CAMERA_7) +#error "At least one camera should be selected" +#endif + +/* Deduce from the enabled cameras which GMSL channels are active. */ +#if defined(GMSL_CAMERA_0) || defined(GMSL_CAMERA_1) || \ + defined(GMSL_CAMERA_2) || defined(GMSL_CAMERA_3) +#define GMSL_0 +#endif + +#if defined(GMSL_CAMERA_4) || defined(GMSL_CAMERA_5) || \ + defined(GMSL_CAMERA_6) || defined(GMSL_CAMERA_7) +#define GMSL_1 +#endif + +/* Deduce the camera model compatible string. */ +#if defined(GMSL_CAMERA_RDACM20) +#define GMSL_CAMERA_MODEL "imi,rdacm20" +#elif defined(GMSL_CAMERA_RDACM21) +#define GMSL_CAMERA_MODEL "imi,rdacm21" +#endif + +#ifdef GMSL_0 +&vin0 { + status = "okay"; +}; + +&vin1 { + status = "okay"; +}; + +&vin2 { + status = "okay"; +}; + +&vin3 { + status = "okay"; +}; + +&gmsl0 { + status = "okay"; + +#if defined(GMSL_CAMERA_RDACM21) + maxim,reverse-channel-microvolt = <100000>; +#endif + + ports { +#ifdef GMSL_CAMERA_0 + port@0 { + max9286_in0: endpoint { + remote-endpoint = <&fakra_con0>; + }; + }; +#endif + +#ifdef GMSL_CAMERA_1 + port@1 { + max9286_in1: endpoint{ + remote-endpoint = <&fakra_con1>; + }; + + }; +#endif + +#ifdef GMSL_CAMERA_2 + port@2 { + max9286_in2: endpoint { + remote-endpoint = <&fakra_con2>; + }; + + }; +#endif + +#ifdef GMSL_CAMERA_3 + port@3 { + max9286_in3: endpoint { + remote-endpoint = <&fakra_con3>; + }; + + }; +#endif + }; + + i2c-mux { +#ifdef GMSL_CAMERA_0 + i2c@0 { + status = "okay"; + + camera@51 { + compatible = GMSL_CAMERA_MODEL; + reg = <0x51>, <0x61>; + + port { + fakra_con0: endpoint { + remote-endpoint = <&max9286_in0>; + }; + }; + }; + }; +#endif + +#ifdef GMSL_CAMERA_1 + i2c@1 { + status = "okay"; + + camera@52 { + compatible = GMSL_CAMERA_MODEL; + reg = <0x52>, <0x62>; + + port { + fakra_con1: endpoint { + remote-endpoint = <&max9286_in1>; + }; + }; + }; + }; +#endif + +#ifdef GMSL_CAMERA_2 + i2c@2 { + status = "okay"; + + camera@53 { + compatible = GMSL_CAMERA_MODEL; + reg = <0x53>, <0x63>; + + port { + fakra_con2: endpoint { + remote-endpoint = <&max9286_in2>; + }; + }; + }; + }; +#endif + +#ifdef GMSL_CAMERA_3 + i2c@3 { + status = "okay"; + + camera@54 { + compatible = GMSL_CAMERA_MODEL; + reg = <0x54>, <0x64>; + + port { + fakra_con3: endpoint { + remote-endpoint = <&max9286_in3>; + }; + }; + }; + }; +#endif + }; +}; +#endif /* ifdef GMSL_0 */ + +#ifdef GMSL_1 +&vin4 { + status = "okay"; +}; + +&vin5 { + status = "okay"; +}; + +&vin6 { + status = "okay"; +}; + +&vin7 { + status = "okay"; +}; + +&gmsl1 { + status = "okay"; + +#if defined(GMSL_CAMERA_RDACM21) + maxim,reverse-channel-microvolt = <100000>; +#endif + + ports { +#ifdef GMSL_CAMERA_4 + port@0 { + max9286_in4: endpoint { + remote-endpoint = <&fakra_con4>; + }; + }; +#endif + +#ifdef GMSL_CAMERA_5 + port@1 { + max9286_in5: endpoint{ + remote-endpoint = <&fakra_con5>; + }; + + }; +#endif + +#ifdef GMSL_CAMERA_6 + port@2 { + max9286_in6: endpoint { + remote-endpoint = <&fakra_con6>; + }; + + }; +#endif + +#ifdef GMSL_CAMERA_7 + port@3 { + max9286_in7: endpoint { + remote-endpoint = <&fakra_con7>; + }; + + }; +#endif + }; + + i2c-mux { +#ifdef GMSL_CAMERA_4 + i2c@0 { + status = "okay"; + + camera@55 { + compatible = GMSL_CAMERA_MODEL; + reg = <0x55>, <0x65>; + + port { + fakra_con4: endpoint { + remote-endpoint = <&max9286_in4>; + }; + }; + }; + }; +#endif + +#ifdef GMSL_CAMERA_5 + i2c@1 { + status = "okay"; + + camera@56 { + compatible = GMSL_CAMERA_MODEL; + reg = <0x56>, <0x66>; + + port { + fakra_con5: endpoint { + remote-endpoint = <&max9286_in5>; + }; + }; + }; + }; +#endif + +#ifdef GMSL_CAMERA_6 + i2c@2 { + status = "okay"; + + camera@57 { + compatible = GMSL_CAMERA_MODEL; + reg = <0x57>, <0x67>; + + port { + fakra_con6: endpoint { + remote-endpoint = <&max9286_in6>; + }; + }; + }; + }; +#endif + +#ifdef GMSL_CAMERA_7 + i2c@3 { + status = "okay"; + + camera@58 { + compatible = GMSL_CAMERA_MODEL; + reg = <0x58>, <0x68>; + + port { + fakra_con7: endpoint { + remote-endpoint = <&max9286_in7>; + }; + }; + }; + }; +#endif + }; +}; +#endif /* ifdef GMSL_1 */ diff --git a/arch/arm64/boot/dts/renesas/hihope-common.dtsi b/arch/arm64/boot/dts/renesas/hihope-common.dtsi index 0c7e6f790590..935d06515aa6 100644 --- a/arch/arm64/boot/dts/renesas/hihope-common.dtsi +++ b/arch/arm64/boot/dts/renesas/hihope-common.dtsi @@ -140,7 +140,7 @@ }; &gpio6 { - usb1-reset { + usb1-reset-hog { gpio-hog; gpios = <10 GPIO_ACTIVE_LOW>; output-low; diff --git a/arch/arm64/boot/dts/renesas/hihope-rzg2-ex-lvds.dtsi b/arch/arm64/boot/dts/renesas/hihope-rzg2-ex-lvds.dtsi index 40c5e8d6d841..d66d17e34694 100644 --- a/arch/arm64/boot/dts/renesas/hihope-rzg2-ex-lvds.dtsi +++ b/arch/arm64/boot/dts/renesas/hihope-rzg2-ex-lvds.dtsi @@ -20,7 +20,7 @@ * When GP1_20 is LOW LVDS0 is connected to the LVDS connector * When GP1_20 is HIGH LVDS0 is connected to the LT8918L */ - lvds-connector-en-gpio { + lvds-connector-en-hog { gpio-hog; gpios = <20 GPIO_ACTIVE_HIGH>; output-low; diff --git a/arch/arm64/boot/dts/renesas/r8a774a1.dtsi b/arch/arm64/boot/dts/renesas/r8a774a1.dtsi index eda6a840371a..12846125a4c9 100644 --- a/arch/arm64/boot/dts/renesas/r8a774a1.dtsi +++ b/arch/arm64/boot/dts/renesas/r8a774a1.dtsi @@ -1698,12 +1698,12 @@ * clkout : #clock-cells = <0>; <&rcar_sound>; * clkout0/1/2/3: #clock-cells = <1>; <&rcar_sound N>; */ - compatible = "renesas,rcar_sound-r8a774a1", "renesas,rcar_sound-gen3"; - reg = <0 0xec500000 0 0x1000>, /* SCU */ - <0 0xec5a0000 0 0x100>, /* ADG */ - <0 0xec540000 0 0x1000>, /* SSIU */ - <0 0xec541000 0 0x280>, /* SSI */ - <0 0xec760000 0 0x200>; /* Audio DMAC peri peri*/ + compatible = "renesas,rcar_sound-r8a774a1", "renesas,rcar_sound-gen3"; + reg = <0 0xec500000 0 0x1000>, /* SCU */ + <0 0xec5a0000 0 0x100>, /* ADG */ + <0 0xec540000 0 0x1000>, /* SSIU */ + <0 0xec541000 0 0x280>, /* SSI */ + <0 0xec760000 0 0x200>; /* Audio DMAC peri peri*/ reg-names = "scu", "adg", "ssiu", "ssi", "audmapp"; clocks = <&cpg CPG_MOD 1005>, @@ -2010,7 +2010,7 @@ dma-names = "rx", "tx"; }; ssiu40: ssiu-32 { - dmas = <&audma0 0x71>, <&audma1 0x72>; + dmas = <&audma0 0x71>, <&audma1 0x72>; dma-names = "rx", "tx"; }; ssiu41: ssiu-33 { diff --git a/arch/arm64/boot/dts/renesas/r8a774b1-beacon-rzg2n-kit.dts b/arch/arm64/boot/dts/renesas/r8a774b1-beacon-rzg2n-kit.dts index 3c0d59def8ee..89d708346ba8 100644 --- a/arch/arm64/boot/dts/renesas/r8a774b1-beacon-rzg2n-kit.dts +++ b/arch/arm64/boot/dts/renesas/r8a774b1-beacon-rzg2n-kit.dts @@ -11,7 +11,7 @@ / { model = "Beacon Embedded Works RZ/G2N Development Kit"; - compatible = "beacon,beacon-rzg2n", "renesas,r8a774b1"; + compatible = "beacon,beacon-rzg2n", "renesas,r8a774b1"; aliases { serial0 = &scif2; diff --git a/arch/arm64/boot/dts/renesas/r8a774b1.dtsi b/arch/arm64/boot/dts/renesas/r8a774b1.dtsi index 44f79fbd75dc..a4b406a346f9 100644 --- a/arch/arm64/boot/dts/renesas/r8a774b1.dtsi +++ b/arch/arm64/boot/dts/renesas/r8a774b1.dtsi @@ -1571,7 +1571,7 @@ * clkout : #clock-cells = <0>; <&rcar_sound>; * clkout0/1/2/3: #clock-cells = <1>; <&rcar_sound N>; */ - compatible = "renesas,rcar_sound-r8a774b1", "renesas,rcar_sound-gen3"; + compatible = "renesas,rcar_sound-r8a774b1", "renesas,rcar_sound-gen3"; reg = <0 0xec500000 0 0x1000>, /* SCU */ <0 0xec5a0000 0 0x100>, /* ADG */ <0 0xec540000 0 0x1000>, /* SSIU */ @@ -1883,7 +1883,7 @@ dma-names = "rx", "tx"; }; ssiu40: ssiu-32 { - dmas = <&audma0 0x71>, <&audma1 0x72>; + dmas = <&audma0 0x71>, <&audma1 0x72>; dma-names = "rx", "tx"; }; ssiu41: ssiu-33 { diff --git a/arch/arm64/boot/dts/renesas/r8a774c0-ek874-idk-2121wr.dts b/arch/arm64/boot/dts/renesas/r8a774c0-ek874-idk-2121wr.dts index a7b27d09f6c2..c1812d1ef06a 100644 --- a/arch/arm64/boot/dts/renesas/r8a774c0-ek874-idk-2121wr.dts +++ b/arch/arm64/boot/dts/renesas/r8a774c0-ek874-idk-2121wr.dts @@ -68,7 +68,7 @@ * When GP0_17 is low LVDS[01] are connected to the LVDS connector * When GP0_17 is high LVDS[01] are connected to the LT8918L */ - lvds-connector-en-gpio{ + lvds-connector-en-hog { gpio-hog; gpios = <17 GPIO_ACTIVE_HIGH>; output-low; diff --git a/arch/arm64/boot/dts/renesas/r8a774c0.dtsi b/arch/arm64/boot/dts/renesas/r8a774c0.dtsi index b8dcbbbf3db5..e123c8d1bab9 100644 --- a/arch/arm64/boot/dts/renesas/r8a774c0.dtsi +++ b/arch/arm64/boot/dts/renesas/r8a774c0.dtsi @@ -1328,11 +1328,11 @@ */ compatible = "renesas,rcar_sound-r8a774c0", "renesas,rcar_sound-gen3"; - reg = <0 0xec500000 0 0x1000>, /* SCU */ - <0 0xec5a0000 0 0x100>, /* ADG */ - <0 0xec540000 0 0x1000>, /* SSIU */ - <0 0xec541000 0 0x280>, /* SSI */ - <0 0xec760000 0 0x200>; /* Audio DMAC peri peri*/ + reg = <0 0xec500000 0 0x1000>, /* SCU */ + <0 0xec5a0000 0 0x100>, /* ADG */ + <0 0xec540000 0 0x1000>, /* SSIU */ + <0 0xec541000 0 0x280>, /* SSI */ + <0 0xec760000 0 0x200>; /* Audio DMAC peri peri*/ reg-names = "scu", "adg", "ssiu", "ssi", "audmapp"; clocks = <&cpg CPG_MOD 1005>, diff --git a/arch/arm64/boot/dts/renesas/r8a774e1-beacon-rzg2h-kit.dts b/arch/arm64/boot/dts/renesas/r8a774e1-beacon-rzg2h-kit.dts index 7b6649a3ded0..3e9ced3b2d33 100644 --- a/arch/arm64/boot/dts/renesas/r8a774e1-beacon-rzg2h-kit.dts +++ b/arch/arm64/boot/dts/renesas/r8a774e1-beacon-rzg2h-kit.dts @@ -11,7 +11,7 @@ / { model = "Beacon Embedded Works RZ/G2H Development Kit"; - compatible = "beacon,beacon-rzg2h", "renesas,r8a774e1"; + compatible = "beacon,beacon-rzg2h", "renesas,r8a774e1"; aliases { serial0 = &scif2; diff --git a/arch/arm64/boot/dts/renesas/r8a774e1.dtsi b/arch/arm64/boot/dts/renesas/r8a774e1.dtsi index e6d8610730a8..989c1c00dcdc 100644 --- a/arch/arm64/boot/dts/renesas/r8a774e1.dtsi +++ b/arch/arm64/boot/dts/renesas/r8a774e1.dtsi @@ -1784,7 +1784,7 @@ * clkout : #clock-cells = <0>; <&rcar_sound>; * clkout0/1/2/3: #clock-cells = <1>; <&rcar_sound N>; */ - compatible = "renesas,rcar_sound-r8a774e1", "renesas,rcar_sound-gen3"; + compatible = "renesas,rcar_sound-r8a774e1", "renesas,rcar_sound-gen3"; reg = <0 0xec500000 0 0x1000>, /* SCU */ <0 0xec5a0000 0 0x100>, /* ADG */ <0 0xec540000 0 0x1000>, /* SSIU */ @@ -2043,7 +2043,7 @@ dma-names = "rx", "tx"; }; ssiu40: ssiu-32 { - dmas = <&audma0 0x71>, <&audma1 0x72>; + dmas = <&audma0 0x71>, <&audma1 0x72>; dma-names = "rx", "tx"; }; ssiu41: ssiu-33 { diff --git a/arch/arm64/boot/dts/renesas/r8a77951.dtsi b/arch/arm64/boot/dts/renesas/r8a77951.dtsi index 9265a5702792..4e87e8776a2b 100644 --- a/arch/arm64/boot/dts/renesas/r8a77951.dtsi +++ b/arch/arm64/boot/dts/renesas/r8a77951.dtsi @@ -2018,12 +2018,12 @@ * clkout : #clock-cells = <0>; <&rcar_sound>; * clkout0/1/2/3: #clock-cells = <1>; <&rcar_sound N>; */ - compatible = "renesas,rcar_sound-r8a7795", "renesas,rcar_sound-gen3"; - reg = <0 0xec500000 0 0x1000>, /* SCU */ - <0 0xec5a0000 0 0x100>, /* ADG */ - <0 0xec540000 0 0x1000>, /* SSIU */ - <0 0xec541000 0 0x280>, /* SSI */ - <0 0xec760000 0 0x200>; /* Audio DMAC peri peri*/ + compatible = "renesas,rcar_sound-r8a7795", "renesas,rcar_sound-gen3"; + reg = <0 0xec500000 0 0x1000>, /* SCU */ + <0 0xec5a0000 0 0x100>, /* ADG */ + <0 0xec540000 0 0x1000>, /* SSIU */ + <0 0xec541000 0 0x280>, /* SSI */ + <0 0xec760000 0 0x200>; /* Audio DMAC peri peri*/ reg-names = "scu", "adg", "ssiu", "ssi", "audmapp"; clocks = <&cpg CPG_MOD 1005>, @@ -2277,7 +2277,7 @@ dma-names = "rx", "tx"; }; ssiu40: ssiu-32 { - dmas = <&audma0 0x71>, <&audma1 0x72>; + dmas = <&audma0 0x71>, <&audma1 0x72>; dma-names = "rx", "tx"; }; ssiu41: ssiu-33 { @@ -2412,6 +2412,18 @@ }; }; + mlp: mlp@ec520000 { + compatible = "renesas,r8a7795-mlp", + "renesas,rcar-gen3-mlp"; + reg = <0 0xec520000 0 0x800>; + interrupts = <GIC_SPI 384 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 385 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 802>; + power-domains = <&sysc R8A7795_PD_ALWAYS_ON>; + resets = <&cpg 802>; + status = "disabled"; + }; + audma0: dma-controller@ec700000 { compatible = "renesas,dmac-r8a7795", "renesas,rcar-dmac"; diff --git a/arch/arm64/boot/dts/renesas/r8a77960.dtsi b/arch/arm64/boot/dts/renesas/r8a77960.dtsi index 26f7103d11da..6f79da8cc8c0 100644 --- a/arch/arm64/boot/dts/renesas/r8a77960.dtsi +++ b/arch/arm64/boot/dts/renesas/r8a77960.dtsi @@ -1890,12 +1890,12 @@ * clkout : #clock-cells = <0>; <&rcar_sound>; * clkout0/1/2/3: #clock-cells = <1>; <&rcar_sound N>; */ - compatible = "renesas,rcar_sound-r8a7796", "renesas,rcar_sound-gen3"; - reg = <0 0xec500000 0 0x1000>, /* SCU */ - <0 0xec5a0000 0 0x100>, /* ADG */ - <0 0xec540000 0 0x1000>, /* SSIU */ - <0 0xec541000 0 0x280>, /* SSI */ - <0 0xec760000 0 0x200>; /* Audio DMAC peri peri*/ + compatible = "renesas,rcar_sound-r8a7796", "renesas,rcar_sound-gen3"; + reg = <0 0xec500000 0 0x1000>, /* SCU */ + <0 0xec5a0000 0 0x100>, /* ADG */ + <0 0xec540000 0 0x1000>, /* SSIU */ + <0 0xec541000 0 0x280>, /* SSI */ + <0 0xec760000 0 0x200>; /* Audio DMAC peri peri*/ reg-names = "scu", "adg", "ssiu", "ssi", "audmapp"; clocks = <&cpg CPG_MOD 1005>, @@ -2202,7 +2202,7 @@ dma-names = "rx", "tx"; }; ssiu40: ssiu-32 { - dmas = <&audma0 0x71>, <&audma1 0x72>; + dmas = <&audma0 0x71>, <&audma1 0x72>; dma-names = "rx", "tx"; }; ssiu41: ssiu-33 { @@ -2284,6 +2284,18 @@ }; }; + mlp: mlp@ec520000 { + compatible = "renesas,r8a7796-mlp", + "renesas,rcar-gen3-mlp"; + reg = <0 0xec520000 0 0x800>; + interrupts = <GIC_SPI 384 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 385 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 802>; + power-domains = <&sysc R8A7796_PD_ALWAYS_ON>; + resets = <&cpg 802>; + status = "disabled"; + }; + audma0: dma-controller@ec700000 { compatible = "renesas,dmac-r8a7796", "renesas,rcar-dmac"; diff --git a/arch/arm64/boot/dts/renesas/r8a77961.dtsi b/arch/arm64/boot/dts/renesas/r8a77961.dtsi index ac9b587f6fc5..68cbbb322acf 100644 --- a/arch/arm64/boot/dts/renesas/r8a77961.dtsi +++ b/arch/arm64/boot/dts/renesas/r8a77961.dtsi @@ -1734,7 +1734,7 @@ * clkout : #clock-cells = <0>; <&rcar_sound>; * clkout0/1/2/3: #clock-cells = <1>; <&rcar_sound N>; */ - compatible = "renesas,rcar_sound-r8a77961", "renesas,rcar_sound-gen3"; + compatible = "renesas,rcar_sound-r8a77961", "renesas,rcar_sound-gen3"; reg = <0 0xec500000 0 0x1000>, /* SCU */ <0 0xec5a0000 0 0x100>, /* ADG */ <0 0xec540000 0 0x1000>, /* SSIU */ @@ -2046,7 +2046,7 @@ dma-names = "rx", "tx"; }; ssiu40: ssiu-32 { - dmas = <&audma0 0x71>, <&audma1 0x72>; + dmas = <&audma0 0x71>, <&audma1 0x72>; dma-names = "rx", "tx"; }; ssiu41: ssiu-33 { @@ -2128,6 +2128,18 @@ }; }; + mlp: mlp@ec520000 { + compatible = "renesas,r8a77961-mlp", + "renesas,rcar-gen3-mlp"; + reg = <0 0xec520000 0 0x800>; + interrupts = <GIC_SPI 384 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 385 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 802>; + power-domains = <&sysc R8A77961_PD_ALWAYS_ON>; + resets = <&cpg 802>; + status = "disabled"; + }; + audma0: dma-controller@ec700000 { compatible = "renesas,dmac-r8a77961", "renesas,rcar-dmac"; @@ -2722,6 +2734,33 @@ port@2 { reg = <2>; du_out_lvds0: endpoint { + remote-endpoint = <&lvds0_in>; + }; + }; + }; + }; + + lvds0: lvds@feb90000 { + compatible = "renesas,r8a77961-lvds"; + reg = <0 0xfeb90000 0 0x14>; + clocks = <&cpg CPG_MOD 727>; + power-domains = <&sysc R8A77961_PD_ALWAYS_ON>; + resets = <&cpg 727>; + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + lvds0_in: endpoint { + remote-endpoint = <&du_out_lvds0>; + }; + }; + port@1 { + reg = <1>; + lvds0_out: endpoint { }; }; }; diff --git a/arch/arm64/boot/dts/renesas/r8a77965.dtsi b/arch/arm64/boot/dts/renesas/r8a77965.dtsi index f898aad72b9d..9f858af8b762 100644 --- a/arch/arm64/boot/dts/renesas/r8a77965.dtsi +++ b/arch/arm64/boot/dts/renesas/r8a77965.dtsi @@ -1753,12 +1753,12 @@ * clkout : #clock-cells = <0>; <&rcar_sound>; * clkout0/1/2/3: #clock-cells = <1>; <&rcar_sound N>; */ - compatible = "renesas,rcar_sound-r8a77965", "renesas,rcar_sound-gen3"; - reg = <0 0xec500000 0 0x1000>, /* SCU */ - <0 0xec5a0000 0 0x100>, /* ADG */ - <0 0xec540000 0 0x1000>, /* SSIU */ - <0 0xec541000 0 0x280>, /* SSI */ - <0 0xec760000 0 0x200>; /* Audio DMAC peri peri*/ + compatible = "renesas,rcar_sound-r8a77965", "renesas,rcar_sound-gen3"; + reg = <0 0xec500000 0 0x1000>, /* SCU */ + <0 0xec5a0000 0 0x100>, /* ADG */ + <0 0xec540000 0 0x1000>, /* SSIU */ + <0 0xec541000 0 0x280>, /* SSI */ + <0 0xec760000 0 0x200>; /* Audio DMAC peri peri*/ reg-names = "scu", "adg", "ssiu", "ssi", "audmapp"; clocks = <&cpg CPG_MOD 1005>, @@ -2012,7 +2012,7 @@ dma-names = "rx", "tx"; }; ssiu40: ssiu-32 { - dmas = <&audma0 0x71>, <&audma1 0x72>; + dmas = <&audma0 0x71>, <&audma1 0x72>; dma-names = "rx", "tx"; }; ssiu41: ssiu-33 { @@ -2147,6 +2147,18 @@ }; }; + mlp: mlp@ec520000 { + compatible = "renesas,r8a77965-mlp", + "renesas,rcar-gen3-mlp"; + reg = <0 0xec520000 0 0x800>; + interrupts = <GIC_SPI 384 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 385 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 802>; + power-domains = <&sysc R8A77965_PD_ALWAYS_ON>; + resets = <&cpg 802>; + status = "disabled"; + }; + audma0: dma-controller@ec700000 { compatible = "renesas,dmac-r8a77965", "renesas,rcar-dmac"; diff --git a/arch/arm64/boot/dts/renesas/r8a77970-eagle.dts b/arch/arm64/boot/dts/renesas/r8a77970-eagle.dts index b579d3189a93..49d1a929aef7 100644 --- a/arch/arm64/boot/dts/renesas/r8a77970-eagle.dts +++ b/arch/arm64/boot/dts/renesas/r8a77970-eagle.dts @@ -113,6 +113,20 @@ }; }; +&csi40 { + status = "okay"; + + ports { + port@0 { + csi40_in: endpoint { + clock-lanes = <0>; + data-lanes = <1 2 3 4>; + remote-endpoint = <&max9286_out0>; + }; + }; + }; +}; + &du { clocks = <&cpg CPG_MOD 724>, <&x1_clk>; clock-names = "du.0", "dclkin.0"; @@ -172,6 +186,89 @@ }; }; +&i2c3 { + pinctrl-0 = <&i2c3_pins>; + pinctrl-names = "default"; + + status = "okay"; + clock-frequency = <400000>; + + gmsl0: gmsl-deserializer@48 { + compatible = "maxim,max9286"; + reg = <0x48>; + + maxim,gpio-poc = <0 GPIO_ACTIVE_LOW>; + enable-gpios = <&io_expander 0 GPIO_ACTIVE_HIGH>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + }; + + port@1 { + reg = <1>; + }; + + port@2 { + reg = <2>; + }; + + port@3 { + reg = <3>; + }; + + port@4 { + reg = <4>; + max9286_out0: endpoint { + clock-lanes = <0>; + data-lanes = <1 2 3 4>; + remote-endpoint = <&csi40_in>; + }; + }; + }; + + i2c-mux { + #address-cells = <1>; + #size-cells = <0>; + + i2c@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + + status = "disabled"; + }; + + i2c@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + + status = "disabled"; + }; + + i2c@2 { + #address-cells = <1>; + #size-cells = <0>; + reg = <2>; + + status = "disabled"; + }; + + i2c@3 { + #address-cells = <1>; + #size-cells = <0>; + reg = <3>; + + status = "disabled"; + }; + }; + }; +}; + &lvds0 { status = "okay"; @@ -200,6 +297,11 @@ function = "i2c0"; }; + i2c3_pins: i2c3 { + groups = "i2c3_a"; + function = "i2c3"; + }; + qspi0_pins: qspi0 { groups = "qspi0_ctrl", "qspi0_data4"; function = "qspi0"; diff --git a/arch/arm64/boot/dts/renesas/r8a77980-condor.dts b/arch/arm64/boot/dts/renesas/r8a77980-condor.dts index 3d6d10c82f48..43ed033eb512 100644 --- a/arch/arm64/boot/dts/renesas/r8a77980-condor.dts +++ b/arch/arm64/boot/dts/renesas/r8a77980-condor.dts @@ -108,6 +108,34 @@ }; }; +&csi40 { + status = "okay"; + + ports { + port@0 { + csi40_in: endpoint { + clock-lanes = <0>; + data-lanes = <1 2 3 4>; + remote-endpoint = <&max9286_out0>; + }; + }; + }; +}; + +&csi41 { + status = "okay"; + + ports { + port@0 { + csi41_in: endpoint { + clock-lanes = <0>; + data-lanes = <1 2 3 4>; + remote-endpoint = <&max9286_out1>; + }; + }; + }; +}; + &du { clocks = <&cpg CPG_MOD 724>, <&x1_clk>; @@ -200,6 +228,164 @@ }; }; +&i2c1 { + pinctrl-0 = <&i2c1_pins>; + pinctrl-names = "default"; + + status = "okay"; + clock-frequency = <400000>; + + gmsl0: gmsl-deserializer@48 { + compatible = "maxim,max9286"; + reg = <0x48>; + + maxim,gpio-poc = <0 GPIO_ACTIVE_LOW>; + enable-gpios = <&io_expander0 0 GPIO_ACTIVE_HIGH>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + }; + + port@1 { + reg = <1>; + }; + + port@2 { + reg = <2>; + }; + + port@3 { + reg = <3>; + }; + + port@4 { + reg = <4>; + max9286_out0: endpoint { + clock-lanes = <0>; + data-lanes = <1 2 3 4>; + remote-endpoint = <&csi40_in>; + }; + }; + }; + + i2c-mux { + #address-cells = <1>; + #size-cells = <0>; + + i2c@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + + status = "disabled"; + }; + + i2c@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + + status = "disabled"; + }; + + i2c@2 { + #address-cells = <1>; + #size-cells = <0>; + reg = <2>; + + status = "disabled"; + }; + + i2c@3 { + #address-cells = <1>; + #size-cells = <0>; + reg = <3>; + + status = "disabled"; + }; + }; + }; + + gmsl1: gmsl-deserializer@4a { + compatible = "maxim,max9286"; + reg = <0x4a>; + + maxim,gpio-poc = <0 GPIO_ACTIVE_LOW>; + enable-gpios = <&io_expander1 0 GPIO_ACTIVE_HIGH>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + }; + + port@1 { + reg = <1>; + }; + + port@2 { + reg = <2>; + }; + + port@3 { + reg = <3>; + }; + + port@4 { + reg = <4>; + max9286_out1: endpoint { + clock-lanes = <0>; + data-lanes = <1 2 3 4>; + remote-endpoint = <&csi41_in>; + }; + }; + }; + + i2c-mux { + #address-cells = <1>; + #size-cells = <0>; + + i2c@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + + status = "disabled"; + }; + + i2c@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + + status = "disabled"; + }; + + i2c@2 { + #address-cells = <1>; + #size-cells = <0>; + reg = <2>; + + status = "disabled"; + }; + + i2c@3 { + #address-cells = <1>; + #size-cells = <0>; + reg = <3>; + + status = "disabled"; + }; + }; + }; +}; + &lvds0 { status = "okay"; @@ -256,6 +442,11 @@ function = "i2c0"; }; + i2c1_pins: i2c1 { + groups = "i2c1"; + function = "i2c1"; + }; + mmc_pins: mmc { groups = "mmc_data8", "mmc_ctrl", "mmc_ds"; function = "mmc"; diff --git a/arch/arm64/boot/dts/renesas/r8a77990.dtsi b/arch/arm64/boot/dts/renesas/r8a77990.dtsi index 14caedd0c959..7e0f1aab2135 100644 --- a/arch/arm64/boot/dts/renesas/r8a77990.dtsi +++ b/arch/arm64/boot/dts/renesas/r8a77990.dtsi @@ -1489,12 +1489,12 @@ * clkout : #clock-cells = <0>; <&rcar_sound>; * clkout0/1/2/3: #clock-cells = <1>; <&rcar_sound N>; */ - compatible = "renesas,rcar_sound-r8a77990", "renesas,rcar_sound-gen3"; - reg = <0 0xec500000 0 0x1000>, /* SCU */ - <0 0xec5a0000 0 0x100>, /* ADG */ - <0 0xec540000 0 0x1000>, /* SSIU */ - <0 0xec541000 0 0x280>, /* SSI */ - <0 0xec760000 0 0x200>; /* Audio DMAC peri peri*/ + compatible = "renesas,rcar_sound-r8a77990", "renesas,rcar_sound-gen3"; + reg = <0 0xec500000 0 0x1000>, /* SCU */ + <0 0xec5a0000 0 0x100>, /* ADG */ + <0 0xec540000 0 0x1000>, /* SSIU */ + <0 0xec541000 0 0x280>, /* SSI */ + <0 0xec760000 0 0x200>; /* Audio DMAC peri peri*/ reg-names = "scu", "adg", "ssiu", "ssi", "audmapp"; clocks = <&cpg CPG_MOD 1005>, @@ -1682,6 +1682,18 @@ }; }; + mlp: mlp@ec520000 { + compatible = "renesas,r8a77990-mlp", + "renesas,rcar-gen3-mlp"; + reg = <0 0xec520000 0 0x800>; + interrupts = <GIC_SPI 384 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 385 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 802>; + power-domains = <&sysc R8A77990_PD_ALWAYS_ON>; + resets = <&cpg 802>; + status = "disabled"; + }; + audma0: dma-controller@ec700000 { compatible = "renesas,dmac-r8a77990", "renesas,rcar-dmac"; diff --git a/arch/arm64/boot/dts/renesas/r8a77995.dtsi b/arch/arm64/boot/dts/renesas/r8a77995.dtsi index f29f3982a492..cac1f9467ffa 100644 --- a/arch/arm64/boot/dts/renesas/r8a77995.dtsi +++ b/arch/arm64/boot/dts/renesas/r8a77995.dtsi @@ -1046,12 +1046,12 @@ * clkout : #clock-cells = <0>; <&rcar_sound>; * clkout0/1/2/3: #clock-cells = <1>; <&rcar_sound N>; */ - compatible = "renesas,rcar_sound-r8a77995", "renesas,rcar_sound-gen3"; - reg = <0 0xec500000 0 0x1000>, /* SCU */ - <0 0xec5a0000 0 0x100>, /* ADG */ - <0 0xec540000 0 0x1000>, /* SSIU */ - <0 0xec541000 0 0x280>, /* SSI */ - <0 0xec740000 0 0x200>; /* Audio DMAC peri peri*/ + compatible = "renesas,rcar_sound-r8a77995", "renesas,rcar_sound-gen3"; + reg = <0 0xec500000 0 0x1000>, /* SCU */ + <0 0xec5a0000 0 0x100>, /* ADG */ + <0 0xec540000 0 0x1000>, /* SSIU */ + <0 0xec541000 0 0x280>, /* SSI */ + <0 0xec740000 0 0x200>; /* Audio DMAC peri peri*/ reg-names = "scu", "adg", "ssiu", "ssi", "audmapp"; clocks = <&cpg CPG_MOD 1005>, @@ -1132,6 +1132,18 @@ }; }; + mlp: mlp@ec520000 { + compatible = "renesas,r8a77995-mlp", + "renesas,rcar-gen3-mlp"; + reg = <0 0xec520000 0 0x800>; + interrupts = <GIC_SPI 384 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 385 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 802>; + power-domains = <&sysc R8A77995_PD_ALWAYS_ON>; + resets = <&cpg 802>; + status = "disabled"; + }; + audma0: dma-controller@ec700000 { compatible = "renesas,dmac-r8a77995", "renesas,rcar-dmac"; diff --git a/arch/arm64/boot/dts/renesas/r8a779a0-falcon-csi-dsi.dtsi b/arch/arm64/boot/dts/renesas/r8a779a0-falcon-csi-dsi.dtsi index f791c76f1bcf..e06b8eda85e1 100644 --- a/arch/arm64/boot/dts/renesas/r8a779a0-falcon-csi-dsi.dtsi +++ b/arch/arm64/boot/dts/renesas/r8a779a0-falcon-csi-dsi.dtsi @@ -5,6 +5,63 @@ * Copyright (C) 2021 Glider bv */ +&csi40 { + status = "okay"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + csi40_in: endpoint { + clock-lanes = <0>; + data-lanes = <1 2 3 4>; + remote-endpoint = <&max96712_out0>; + }; + }; + }; +}; + +&csi42 { + status = "okay"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + csi42_in: endpoint { + clock-lanes = <0>; + data-lanes = <1 2 3 4>; + remote-endpoint = <&max96712_out1>; + }; + }; + }; +}; + +&csi43 { + status = "okay"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + csi43_in: endpoint { + clock-lanes = <0>; + data-lanes = <1 2 3 4>; + remote-endpoint = <&max96712_out2>; + }; + }; + }; +}; + &i2c0 { pca9654_a: gpio@21 { compatible = "onnn,pca9654"; @@ -34,3 +91,175 @@ pagesize = <8>; }; }; + +&i2c1 { + gmsl0: gmsl-deserializer@49 { + compatible = "maxim,max96712"; + reg = <0x49>; + enable-gpios = <&pca9654_a 0 GPIO_ACTIVE_HIGH>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@4 { + reg = <4>; + max96712_out0: endpoint { + clock-lanes = <0>; + data-lanes = <1 2 3 4>; + remote-endpoint = <&csi40_in>; + }; + }; + }; + }; + + gmsl1: gmsl-deserializer@4b { + compatible = "maxim,max96712"; + reg = <0x4b>; + enable-gpios = <&pca9654_b 0 GPIO_ACTIVE_HIGH>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@4 { + reg = <4>; + max96712_out1: endpoint { + clock-lanes = <0>; + data-lanes = <1 2 3 4>; + lane-polarities = <0 0 0 0 1>; + remote-endpoint = <&csi42_in>; + }; + }; + }; + }; + + gmsl2: gmsl-deserializer@6b { + compatible = "maxim,max96712"; + reg = <0x6b>; + enable-gpios = <&pca9654_c 0 GPIO_ACTIVE_HIGH>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@4 { + reg = <4>; + max96712_out2: endpoint { + clock-lanes = <0>; + data-lanes = <1 2 3 4>; + lane-polarities = <0 0 0 0 1>; + remote-endpoint = <&csi43_in>; + }; + }; + }; + }; +}; + +&isp0 { + status = "okay"; +}; + +&isp2 { + status = "okay"; +}; + +&isp3 { + status = "okay"; +}; + +&vin00 { + status = "okay"; +}; + +&vin01 { + status = "okay"; +}; + +&vin02 { + status = "okay"; +}; + +&vin03 { + status = "okay"; +}; + +&vin04 { + status = "okay"; +}; + +&vin05 { + status = "okay"; +}; + +&vin06 { + status = "okay"; +}; + +&vin07 { + status = "okay"; +}; + +&vin16 { + status = "okay"; +}; + +&vin17 { + status = "okay"; +}; + +&vin18 { + status = "okay"; +}; + +&vin19 { + status = "okay"; +}; + +&vin20 { + status = "okay"; +}; + +&vin21 { + status = "okay"; +}; + +&vin22 { + status = "okay"; +}; + +&vin23 { + status = "okay"; +}; + +&vin24 { + status = "okay"; +}; + +&vin25 { + status = "okay"; +}; + +&vin26 { + status = "okay"; +}; + +&vin27 { + status = "okay"; +}; + +&vin28 { + status = "okay"; +}; + +&vin29 { + status = "okay"; +}; + +&vin30 { + status = "okay"; +}; + +&vin31 { + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/renesas/r8a779a0.dtsi b/arch/arm64/boot/dts/renesas/r8a779a0.dtsi index 1e7ed12ebc87..c4be288b1912 100644 --- a/arch/arm64/boot/dts/renesas/r8a779a0.dtsi +++ b/arch/arm64/boot/dts/renesas/r8a779a0.dtsi @@ -102,7 +102,7 @@ interrupts = <GIC_SPI 832 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cpg CPG_MOD 916>; power-domains = <&sysc R8A779A0_PD_ALWAYS_ON>; - resets = <&cpg 916>; + resets = <&cpg 916>; gpio-controller; #gpio-cells = <2>; gpio-ranges = <&pfc 0 0 28>; @@ -116,7 +116,7 @@ interrupts = <GIC_SPI 836 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cpg CPG_MOD 915>; power-domains = <&sysc R8A779A0_PD_ALWAYS_ON>; - resets = <&cpg 915>; + resets = <&cpg 915>; gpio-controller; #gpio-cells = <2>; gpio-ranges = <&pfc 0 32 31>; @@ -130,7 +130,7 @@ interrupts = <GIC_SPI 840 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cpg CPG_MOD 915>; power-domains = <&sysc R8A779A0_PD_ALWAYS_ON>; - resets = <&cpg 915>; + resets = <&cpg 915>; gpio-controller; #gpio-cells = <2>; gpio-ranges = <&pfc 0 64 25>; @@ -144,7 +144,7 @@ interrupts = <GIC_SPI 844 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cpg CPG_MOD 916>; power-domains = <&sysc R8A779A0_PD_ALWAYS_ON>; - resets = <&cpg 916>; + resets = <&cpg 916>; gpio-controller; #gpio-cells = <2>; gpio-ranges = <&pfc 0 96 17>; @@ -158,7 +158,7 @@ interrupts = <GIC_SPI 848 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cpg CPG_MOD 917>; power-domains = <&sysc R8A779A0_PD_ALWAYS_ON>; - resets = <&cpg 917>; + resets = <&cpg 917>; gpio-controller; #gpio-cells = <2>; gpio-ranges = <&pfc 0 128 27>; @@ -172,7 +172,7 @@ interrupts = <GIC_SPI 852 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cpg CPG_MOD 917>; power-domains = <&sysc R8A779A0_PD_ALWAYS_ON>; - resets = <&cpg 917>; + resets = <&cpg 917>; gpio-controller; #gpio-cells = <2>; gpio-ranges = <&pfc 0 160 21>; @@ -186,7 +186,7 @@ interrupts = <GIC_SPI 856 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cpg CPG_MOD 918>; power-domains = <&sysc R8A779A0_PD_ALWAYS_ON>; - resets = <&cpg 918>; + resets = <&cpg 918>; gpio-controller; #gpio-cells = <2>; gpio-ranges = <&pfc 0 192 21>; @@ -200,7 +200,7 @@ interrupts = <GIC_SPI 860 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cpg CPG_MOD 918>; power-domains = <&sysc R8A779A0_PD_ALWAYS_ON>; - resets = <&cpg 918>; + resets = <&cpg 918>; gpio-controller; #gpio-cells = <2>; gpio-ranges = <&pfc 0 224 21>; @@ -214,7 +214,7 @@ interrupts = <GIC_SPI 864 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cpg CPG_MOD 918>; power-domains = <&sysc R8A779A0_PD_ALWAYS_ON>; - resets = <&cpg 918>; + resets = <&cpg 918>; gpio-controller; #gpio-cells = <2>; gpio-ranges = <&pfc 0 256 21>; @@ -228,7 +228,7 @@ interrupts = <GIC_SPI 868 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cpg CPG_MOD 918>; power-domains = <&sysc R8A779A0_PD_ALWAYS_ON>; - resets = <&cpg 918>; + resets = <&cpg 918>; gpio-controller; #gpio-cells = <2>; gpio-ranges = <&pfc 0 288 21>; @@ -340,6 +340,21 @@ #thermal-sensor-cells = <1>; }; + intc_ex: interrupt-controller@e61c0000 { + compatible = "renesas,intc-ex-r8a779a0", "renesas,irqc"; + #interrupt-cells = <2>; + interrupt-controller; + reg = <0 0xe61c0000 0 0x200>; + interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_CORE R8A779A0_CLK_CP>; + power-domains = <&sysc R8A779A0_PD_ALWAYS_ON>; + }; + tmu0: timer@e61e0000 { compatible = "renesas,tmu-r8a779a0", "renesas,tmu"; reg = <0 0xe61e0000 0 0x30>; diff --git a/arch/arm64/boot/dts/renesas/r8a779f0-spider-cpu.dtsi b/arch/arm64/boot/dts/renesas/r8a779f0-spider-cpu.dtsi index 156586532c84..6e07c54148e7 100644 --- a/arch/arm64/boot/dts/renesas/r8a779f0-spider-cpu.dtsi +++ b/arch/arm64/boot/dts/renesas/r8a779f0-spider-cpu.dtsi @@ -31,6 +31,34 @@ clock-frequency = <32768>; }; +&pfc { + pinctrl-0 = <&scif_clk_pins>; + pinctrl-names = "default"; + + scif3_pins: scif3 { + groups = "scif3_data", "scif3_ctrl"; + function = "scif3"; + }; + + scif_clk_pins: scif_clk { + groups = "scif_clk"; + function = "scif_clk"; + }; +}; + +&rwdt { + timeout-sec = <60>; + status = "okay"; +}; + &scif3 { + pinctrl-0 = <&scif3_pins>; + pinctrl-names = "default"; + + uart-has-rtscts; status = "okay"; }; + +&scif_clk { + clock-frequency = <24000000>; +}; diff --git a/arch/arm64/boot/dts/renesas/r8a779f0.dtsi b/arch/arm64/boot/dts/renesas/r8a779f0.dtsi index eda597766eaf..f4e549867371 100644 --- a/arch/arm64/boot/dts/renesas/r8a779f0.dtsi +++ b/arch/arm64/boot/dts/renesas/r8a779f0.dtsi @@ -59,6 +59,22 @@ #size-cells = <2>; ranges; + rwdt: watchdog@e6020000 { + compatible = "renesas,r8a779f0-wdt", + "renesas,rcar-gen4-wdt"; + reg = <0 0xe6020000 0 0x0c>; + clocks = <&cpg CPG_MOD 907>; + power-domains = <&sysc R8A779F0_PD_ALWAYS_ON>; + resets = <&cpg 907>; + status = "disabled"; + }; + + pfc: pinctrl@e6050000 { + compatible = "renesas,pfc-r8a779f0"; + reg = <0 0xe6050000 0 0x16c>, <0 0xe6050800 0 0x16c>, + <0 0xe6051000 0 0x16c>, <0 0xe6051800 0 0x16c>; + }; + cpg: clock-controller@e6150000 { compatible = "renesas,r8a779f0-cpg-mssr"; reg = <0 0xe6150000 0 0x4000>; @@ -94,6 +110,76 @@ status = "disabled"; }; + dmac0: dma-controller@e7350000 { + compatible = "renesas,dmac-r8a779f0", + "renesas,rcar-gen4-dmac"; + reg = <0 0xe7350000 0 0x1000>, + <0 0xe7300000 0 0x10000>; + interrupts = <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "error", + "ch0", "ch1", "ch2", "ch3", "ch4", + "ch5", "ch6", "ch7", "ch8", "ch9", + "ch10", "ch11", "ch12", "ch13", + "ch14", "ch15"; + clocks = <&cpg CPG_MOD 709>; + clock-names = "fck"; + power-domains = <&sysc R8A779F0_PD_ALWAYS_ON>; + resets = <&cpg 709>; + #dma-cells = <1>; + dma-channels = <16>; + }; + + dmac1: dma-controller@e7351000 { + compatible = "renesas,dmac-r8a779f0", + "renesas,rcar-gen4-dmac"; + reg = <0 0xe7351000 0 0x1000>, + <0 0xe7310000 0 0x10000>; + interrupts = <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 150 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 151 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 152 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 153 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 154 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "error", + "ch0", "ch1", "ch2", "ch3", "ch4", + "ch5", "ch6", "ch7", "ch8", "ch9", + "ch10", "ch11", "ch12", "ch13", + "ch14", "ch15"; + clocks = <&cpg CPG_MOD 710>; + clock-names = "fck"; + power-domains = <&sysc R8A779F0_PD_ALWAYS_ON>; + resets = <&cpg 710>; + #dma-cells = <1>; + dma-channels = <16>; + }; + gic: interrupt-controller@f1000000 { compatible = "arm,gic-v3"; #interrupt-cells = <3>; diff --git a/arch/arm64/boot/dts/renesas/r9a07g044c1.dtsi b/arch/arm64/boot/dts/renesas/r9a07g044c1.dtsi new file mode 100644 index 000000000000..1d57df706939 --- /dev/null +++ b/arch/arm64/boot/dts/renesas/r9a07g044c1.dtsi @@ -0,0 +1,32 @@ +// SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +/* + * Device Tree Source for the RZ/G2LC R9A07G044C1 SoC specific parts + * + * Copyright (C) 2021 Renesas Electronics Corp. + */ + +/dts-v1/; +#include "r9a07g044.dtsi" + +/ { + compatible = "renesas,r9a07g044c1", "renesas,r9a07g044"; + + cpus { + /delete-node/ cpu-map; + /delete-node/ cpu@100; + }; + + timer { + interrupts-extended = <&gic GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_LOW)>, + <&gic GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_LOW)>, + <&gic GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_LOW)>, + <&gic GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_LOW)>; + }; +}; + +&soc { + /delete-node/ ssi@1004a800; + /delete-node/ serial@1004c800; + /delete-node/ adc@10059000; + /delete-node/ ethernet@11c30000; +}; diff --git a/arch/arm64/boot/dts/renesas/r9a07g044c2-smarc.dts b/arch/arm64/boot/dts/renesas/r9a07g044c2-smarc.dts new file mode 100644 index 000000000000..5a5cea82a5d9 --- /dev/null +++ b/arch/arm64/boot/dts/renesas/r9a07g044c2-smarc.dts @@ -0,0 +1,91 @@ +// SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +/* + * Device Tree Source for the RZ/G2LC SMARC EVK board + * + * Copyright (C) 2021 Renesas Electronics Corp. + */ + +/dts-v1/; +#include "r9a07g044c2.dtsi" +#include "rzg2lc-smarc.dtsi" + +/ { + model = "Renesas SMARC EVK based on r9a07g044c2"; + compatible = "renesas,smarc-evk", "renesas,r9a07g044c2", "renesas,r9a07g044"; +}; + +&ehci0 { + /delete-property/ pinctrl-0; + /delete-property/ pinctrl-names; + status = "disabled"; +}; + +&ehci1 { + /delete-property/ pinctrl-0; + /delete-property/ pinctrl-names; + status = "disabled"; +}; + +&hsusb { + /delete-property/ pinctrl-0; + /delete-property/ pinctrl-names; + status = "disabled"; +}; + +&i2c0 { + /delete-property/ pinctrl-0; + /delete-property/ pinctrl-names; + status = "disabled"; +}; + +&i2c1 { + /delete-property/ pinctrl-0; + /delete-property/ pinctrl-names; + status = "disabled"; +}; + +&i2c3 { + /delete-property/ pinctrl-0; + /delete-property/ pinctrl-names; + status = "disabled"; +}; + +&ohci0 { + /delete-property/ pinctrl-0; + /delete-property/ pinctrl-names; + status = "disabled"; +}; + +&ohci1 { + /delete-property/ pinctrl-0; + /delete-property/ pinctrl-names; + status = "disabled"; +}; + +&phyrst { + status = "disabled"; +}; + +&spi1 { + /delete-property/ pinctrl-0; + /delete-property/ pinctrl-names; + status = "disabled"; +}; + +&ssi0 { + /delete-property/ pinctrl-0; + /delete-property/ pinctrl-names; + status = "disabled"; +}; + +&usb2_phy0 { + /delete-property/ pinctrl-0; + /delete-property/ pinctrl-names; + status = "disabled"; +}; + +&usb2_phy1 { + /delete-property/ pinctrl-0; + /delete-property/ pinctrl-names; + status = "disabled"; +}; diff --git a/arch/arm64/boot/dts/renesas/r9a07g044c2.dtsi b/arch/arm64/boot/dts/renesas/r9a07g044c2.dtsi new file mode 100644 index 000000000000..7bb8917fe421 --- /dev/null +++ b/arch/arm64/boot/dts/renesas/r9a07g044c2.dtsi @@ -0,0 +1,20 @@ +// SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +/* + * Device Tree Source for the RZ/G2LC R9A07G044C2 SoC specific parts + * + * Copyright (C) 2021 Renesas Electronics Corp. + */ + +/dts-v1/; +#include "r9a07g044.dtsi" + +/ { + compatible = "renesas,r9a07g044c2", "renesas,r9a07g044"; +}; + +&soc { + /delete-node/ ssi@1004a800; + /delete-node/ serial@1004c800; + /delete-node/ adc@10059000; + /delete-node/ ethernet@11c30000; +}; diff --git a/arch/arm64/boot/dts/renesas/r9a07g044l2-smarc.dts b/arch/arm64/boot/dts/renesas/r9a07g044l2-smarc.dts index 247b0b3f1b58..bc2af6c92ccd 100644 --- a/arch/arm64/boot/dts/renesas/r9a07g044l2-smarc.dts +++ b/arch/arm64/boot/dts/renesas/r9a07g044l2-smarc.dts @@ -8,6 +8,8 @@ /dts-v1/; #include "r9a07g044l2.dtsi" #include "rzg2l-smarc-som.dtsi" +#include "rzg2l-smarc-pinfunction.dtsi" +#include "rz-smarc-common.dtsi" #include "rzg2l-smarc.dtsi" / { diff --git a/arch/arm64/boot/dts/renesas/r9a07g054.dtsi b/arch/arm64/boot/dts/renesas/r9a07g054.dtsi new file mode 100644 index 000000000000..5d39e765c291 --- /dev/null +++ b/arch/arm64/boot/dts/renesas/r9a07g054.dtsi @@ -0,0 +1,491 @@ +// SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +/* + * Device Tree Source for the RZ/V2L SoC + * + * Copyright (C) 2021 Renesas Electronics Corp. + */ + +#include <dt-bindings/interrupt-controller/arm-gic.h> +#include <dt-bindings/clock/r9a07g054-cpg.h> + +/ { + compatible = "renesas,r9a07g054"; + #address-cells = <2>; + #size-cells = <2>; + + audio_clk1: audio_clk1 { + compatible = "fixed-clock"; + #clock-cells = <0>; + /* This value must be overridden by boards that provide it */ + clock-frequency = <0>; + }; + + audio_clk2: audio_clk2 { + compatible = "fixed-clock"; + #clock-cells = <0>; + /* This value must be overridden by boards that provide it */ + clock-frequency = <0>; + }; + + /* External CAN clock - to be overridden by boards that provide it */ + can_clk: can { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <0>; + }; + + /* clock can be either from exclk or crystal oscillator (XIN/XOUT) */ + extal_clk: extal { + compatible = "fixed-clock"; + #clock-cells = <0>; + /* This value must be overridden by the board */ + clock-frequency = <0>; + }; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu-map { + cluster0 { + core0 { + cpu = <&cpu0>; + }; + core1 { + cpu = <&cpu1>; + }; + }; + }; + + cpu0: cpu@0 { + compatible = "arm,cortex-a55"; + reg = <0>; + device_type = "cpu"; + #cooling-cells = <2>; + next-level-cache = <&L3_CA55>; + enable-method = "psci"; + clocks = <&cpg CPG_CORE R9A07G054_CLK_I>; + }; + + cpu1: cpu@100 { + compatible = "arm,cortex-a55"; + reg = <0x100>; + device_type = "cpu"; + next-level-cache = <&L3_CA55>; + enable-method = "psci"; + clocks = <&cpg CPG_CORE R9A07G054_CLK_I>; + }; + + L3_CA55: cache-controller-0 { + compatible = "cache"; + cache-unified; + cache-size = <0x40000>; + }; + }; + + psci { + compatible = "arm,psci-1.0", "arm,psci-0.2"; + method = "smc"; + }; + + soc: soc { + compatible = "simple-bus"; + interrupt-parent = <&gic>; + #address-cells = <2>; + #size-cells = <2>; + ranges; + + ssi0: ssi@10049c00 { + reg = <0 0x10049c00 0 0x400>; + #sound-dai-cells = <0>; + /* place holder */ + }; + + spi1: spi@1004b000 { + reg = <0 0x1004b000 0 0x400>; + #address-cells = <1>; + #size-cells = <0>; + /* place holder */ + }; + + scif0: serial@1004b800 { + compatible = "renesas,scif-r9a07g054", + "renesas,scif-r9a07g044"; + reg = <0 0x1004b800 0 0x400>; + interrupts = <GIC_SPI 380 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 382 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 383 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 381 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 384 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 384 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "eri", "rxi", "txi", + "bri", "dri", "tei"; + clocks = <&cpg CPG_MOD R9A07G054_SCIF0_CLK_PCK>; + clock-names = "fck"; + power-domains = <&cpg>; + resets = <&cpg R9A07G054_SCIF0_RST_SYSTEM_N>; + status = "disabled"; + }; + + scif1: serial@1004bc00 { + compatible = "renesas,scif-r9a07g054", + "renesas,scif-r9a07g044"; + reg = <0 0x1004bc00 0 0x400>; + interrupts = <GIC_SPI 385 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 387 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 388 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 386 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 389 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 389 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "eri", "rxi", "txi", + "bri", "dri", "tei"; + clocks = <&cpg CPG_MOD R9A07G054_SCIF1_CLK_PCK>; + clock-names = "fck"; + power-domains = <&cpg>; + resets = <&cpg R9A07G054_SCIF1_RST_SYSTEM_N>; + status = "disabled"; + }; + + scif2: serial@1004c000 { + compatible = "renesas,scif-r9a07g054", + "renesas,scif-r9a07g044"; + reg = <0 0x1004c000 0 0x400>; + interrupts = <GIC_SPI 390 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 392 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 393 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 391 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 394 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 394 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "eri", "rxi", "txi", + "bri", "dri", "tei"; + clocks = <&cpg CPG_MOD R9A07G054_SCIF2_CLK_PCK>; + clock-names = "fck"; + power-domains = <&cpg>; + resets = <&cpg R9A07G054_SCIF2_RST_SYSTEM_N>; + status = "disabled"; + }; + + scif3: serial@1004c400 { + compatible = "renesas,scif-r9a07g054", + "renesas,scif-r9a07g044"; + reg = <0 0x1004c400 0 0x400>; + interrupts = <GIC_SPI 395 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 397 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 398 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 396 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 399 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 399 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "eri", "rxi", "txi", + "bri", "dri", "tei"; + clocks = <&cpg CPG_MOD R9A07G054_SCIF3_CLK_PCK>; + clock-names = "fck"; + power-domains = <&cpg>; + resets = <&cpg R9A07G054_SCIF3_RST_SYSTEM_N>; + status = "disabled"; + }; + + scif4: serial@1004c800 { + compatible = "renesas,scif-r9a07g054", + "renesas,scif-r9a07g044"; + reg = <0 0x1004c800 0 0x400>; + interrupts = <GIC_SPI 400 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 402 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 403 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 401 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 404 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 404 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "eri", "rxi", "txi", + "bri", "dri", "tei"; + clocks = <&cpg CPG_MOD R9A07G054_SCIF4_CLK_PCK>; + clock-names = "fck"; + power-domains = <&cpg>; + resets = <&cpg R9A07G054_SCIF4_RST_SYSTEM_N>; + status = "disabled"; + }; + + sci0: serial@1004d000 { + compatible = "renesas,r9a07g054-sci", "renesas,sci"; + reg = <0 0x1004d000 0 0x400>; + interrupts = <GIC_SPI 405 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 406 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 407 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 408 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "eri", "rxi", "txi", "tei"; + clocks = <&cpg CPG_MOD R9A07G054_SCI0_CLKP>; + clock-names = "fck"; + power-domains = <&cpg>; + resets = <&cpg R9A07G054_SCI0_RST>; + status = "disabled"; + }; + + sci1: serial@1004d400 { + compatible = "renesas,r9a07g054-sci", "renesas,sci"; + reg = <0 0x1004d400 0 0x400>; + interrupts = <GIC_SPI 409 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 410 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 411 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 412 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "eri", "rxi", "txi", "tei"; + clocks = <&cpg CPG_MOD R9A07G054_SCI1_CLKP>; + clock-names = "fck"; + power-domains = <&cpg>; + resets = <&cpg R9A07G054_SCI1_RST>; + status = "disabled"; + }; + + canfd: can@10050000 { + reg = <0 0x10050000 0 0x8000>; + /* place holder */ + }; + + i2c0: i2c@10058000 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0 0x10058000 0 0x400>; + /* place holder */ + }; + + i2c1: i2c@10058400 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0 0x10058400 0 0x400>; + /* place holder */ + }; + + i2c3: i2c@10058c00 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0 0x10058c00 0 0x400>; + /* place holder */ + }; + + adc: adc@10059000 { + reg = <0 0x10059000 0 0x400>; + /* place holder */ + }; + + sbc: spi@10060000 { + reg = <0 0x10060000 0 0x10000>, + <0 0x20000000 0 0x10000000>, + <0 0x10070000 0 0x10000>; + #address-cells = <1>; + #size-cells = <0>; + /* place holder */ + }; + + cpg: clock-controller@11010000 { + compatible = "renesas,r9a07g054-cpg"; + reg = <0 0x11010000 0 0x10000>; + clocks = <&extal_clk>; + clock-names = "extal"; + #clock-cells = <2>; + #reset-cells = <1>; + #power-domain-cells = <0>; + }; + + sysc: system-controller@11020000 { + compatible = "renesas,r9a07g054-sysc"; + reg = <0 0x11020000 0 0x10000>; + interrupts = <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "lpm_int", "ca55stbydone_int", + "cm33stbyr_int", "ca55_deny"; + status = "disabled"; + }; + + pinctrl: pinctrl@11030000 { + compatible = "renesas,r9a07g054-pinctrl", + "renesas,r9a07g044-pinctrl"; + reg = <0 0x11030000 0 0x10000>; + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = <&pinctrl 0 0 392>; + clocks = <&cpg CPG_MOD R9A07G054_GPIO_HCLK>; + power-domains = <&cpg>; + resets = <&cpg R9A07G054_GPIO_RSTN>, + <&cpg R9A07G054_GPIO_PORT_RESETN>, + <&cpg R9A07G054_GPIO_SPARE_RESETN>; + }; + + dmac: dma-controller@11820000 { + compatible = "renesas,r9a07g054-dmac", + "renesas,rz-dmac"; + reg = <0 0x11820000 0 0x10000>, + <0 0x11830000 0 0x10000>; + interrupts = <GIC_SPI 141 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 125 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 126 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 127 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 128 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 129 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 130 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 131 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 132 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 133 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 134 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 135 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 136 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 137 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 138 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 139 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 140 IRQ_TYPE_EDGE_RISING>; + interrupt-names = "error", + "ch0", "ch1", "ch2", "ch3", + "ch4", "ch5", "ch6", "ch7", + "ch8", "ch9", "ch10", "ch11", + "ch12", "ch13", "ch14", "ch15"; + clocks = <&cpg CPG_MOD R9A07G054_DMAC_ACLK>, + <&cpg CPG_MOD R9A07G054_DMAC_PCLK>; + power-domains = <&cpg>; + resets = <&cpg R9A07G054_DMAC_ARESETN>, + <&cpg R9A07G054_DMAC_RST_ASYNC>; + #dma-cells = <1>; + dma-channels = <16>; + }; + + gpu: gpu@11840000 { + reg = <0x0 0x11840000 0x0 0x10000>; + /* place holder */ + }; + + gic: interrupt-controller@11900000 { + compatible = "arm,gic-v3"; + #interrupt-cells = <3>; + #address-cells = <0>; + interrupt-controller; + reg = <0x0 0x11900000 0 0x40000>, + <0x0 0x11940000 0 0x60000>; + interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_LOW>; + }; + + sdhi0: mmc@11c00000 { + reg = <0x0 0x11c00000 0 0x10000>; + /* place holder */ + }; + + sdhi1: mmc@11c10000 { + reg = <0x0 0x11c10000 0 0x10000>; + /* place holder */ + }; + + eth0: ethernet@11c20000 { + compatible = "renesas,r9a07g054-gbeth", + "renesas,rzg2l-gbeth"; + reg = <0 0x11c20000 0 0x10000>; + interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "mux", "fil", "arp_ns"; + phy-mode = "rgmii"; + clocks = <&cpg CPG_MOD R9A07G054_ETH0_CLK_AXI>, + <&cpg CPG_MOD R9A07G054_ETH0_CLK_CHI>, + <&cpg CPG_CORE R9A07G054_CLK_HP>; + clock-names = "axi", "chi", "refclk"; + resets = <&cpg R9A07G054_ETH0_RST_HW_N>; + power-domains = <&cpg>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + eth1: ethernet@11c30000 { + compatible = "renesas,r9a07g054-gbeth", + "renesas,rzg2l-gbeth"; + reg = <0 0x11c30000 0 0x10000>; + interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "mux", "fil", "arp_ns"; + phy-mode = "rgmii"; + clocks = <&cpg CPG_MOD R9A07G054_ETH1_CLK_AXI>, + <&cpg CPG_MOD R9A07G054_ETH1_CLK_CHI>, + <&cpg CPG_CORE R9A07G054_CLK_HP>; + clock-names = "axi", "chi", "refclk"; + resets = <&cpg R9A07G054_ETH1_RST_HW_N>; + power-domains = <&cpg>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + phyrst: usbphy-ctrl@11c40000 { + reg = <0 0x11c40000 0 0x10000>; + /* place holder */ + }; + + ohci0: usb@11c50000 { + reg = <0 0x11c50000 0 0x100>; + /* place holder */ + }; + + ohci1: usb@11c70000 { + reg = <0 0x11c70000 0 0x100>; + /* place holder */ + }; + + ehci0: usb@11c50100 { + reg = <0 0x11c50100 0 0x100>; + /* place holder */ + }; + + ehci1: usb@11c70100 { + reg = <0 0x11c70100 0 0x100>; + /* place holder */ + }; + + usb2_phy0: usb-phy@11c50200 { + reg = <0 0x11c50200 0 0x700>; + /* place holder */ + }; + + usb2_phy1: usb-phy@11c70200 { + reg = <0 0x11c70200 0 0x700>; + /* place holder */ + }; + + hsusb: usb@11c60000 { + reg = <0 0x11c60000 0 0x10000>; + /* place holder */ + }; + + wdt0: watchdog@12800800 { + reg = <0 0x12800800 0 0x400>; + /* place holder */ + }; + + wdt1: watchdog@12800c00 { + reg = <0 0x12800C00 0 0x400>; + /* place holder */ + }; + + wdt2: watchdog@12800400 { + reg = <0 0x12800400 0 0x400>; + /* place holder */ + }; + + ostm0: timer@12801000 { + reg = <0x0 0x12801000 0x0 0x400>; + /* place holder */ + }; + + ostm1: timer@12801400 { + reg = <0x0 0x12801400 0x0 0x400>; + /* place holder */ + }; + + ostm2: timer@12801800 { + reg = <0x0 0x12801800 0x0 0x400>; + /* place holder */ + }; + }; + + timer { + compatible = "arm,armv8-timer"; + interrupts-extended = <&gic GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>, + <&gic GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>, + <&gic GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>, + <&gic GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>; + }; +}; diff --git a/arch/arm64/boot/dts/renesas/r9a07g054l1.dtsi b/arch/arm64/boot/dts/renesas/r9a07g054l1.dtsi new file mode 100644 index 000000000000..c448cc6634c1 --- /dev/null +++ b/arch/arm64/boot/dts/renesas/r9a07g054l1.dtsi @@ -0,0 +1,25 @@ +// SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +/* + * Device Tree Source for the RZ/V2L R9A07G054L1 SoC specific parts + * + * Copyright (C) 2021 Renesas Electronics Corp. + */ + +/dts-v1/; +#include "r9a07g054.dtsi" + +/ { + compatible = "renesas,r9a07g054l1", "renesas,r9a07g054"; + + cpus { + /delete-node/ cpu-map; + /delete-node/ cpu@100; + }; + + timer { + interrupts-extended = <&gic GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_LOW)>, + <&gic GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_LOW)>, + <&gic GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_LOW)>, + <&gic GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_LOW)>; + }; +}; diff --git a/arch/arm64/boot/dts/renesas/r9a07g054l2-smarc.dts b/arch/arm64/boot/dts/renesas/r9a07g054l2-smarc.dts new file mode 100644 index 000000000000..fc334b4c2aa4 --- /dev/null +++ b/arch/arm64/boot/dts/renesas/r9a07g054l2-smarc.dts @@ -0,0 +1,26 @@ +// SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +/* + * Device Tree Source for the RZ/G2L SMARC EVK board + * + * Copyright (C) 2021 Renesas Electronics Corp. + */ + +/dts-v1/; +#include "r9a07g054l2.dtsi" +#include "rzg2l-smarc-som.dtsi" +#include "rzg2l-smarc-pinfunction.dtsi" +#include "rz-smarc-common.dtsi" +#include "rzg2l-smarc.dtsi" + +/ { + model = "Renesas SMARC EVK based on r9a07g054l2"; + compatible = "renesas,smarc-evk", "renesas,r9a07g054l2", "renesas,r9a07g054"; +}; + +&pinctrl { + /delete-node/ can0-stb-hog; + /delete-node/ can1-stb-hog; + /delete-node/ gpio-sd0-pwr-en-hog; + /delete-node/ sd0-dev-sel-hog; + /delete-node/ sd1-pwr-en-hog; +}; diff --git a/arch/arm64/boot/dts/renesas/r9a07g054l2.dtsi b/arch/arm64/boot/dts/renesas/r9a07g054l2.dtsi new file mode 100644 index 000000000000..4d5914bc95d3 --- /dev/null +++ b/arch/arm64/boot/dts/renesas/r9a07g054l2.dtsi @@ -0,0 +1,13 @@ +// SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +/* + * Device Tree Source for the RZ/V2L R9A07G054L2 SoC specific parts + * + * Copyright (C) 2021 Renesas Electronics Corp. + */ + +/dts-v1/; +#include "r9a07g054.dtsi" + +/ { + compatible = "renesas,r9a07g054l2", "renesas,r9a07g054"; +}; diff --git a/arch/arm64/boot/dts/renesas/rz-smarc-common.dtsi b/arch/arm64/boot/dts/renesas/rz-smarc-common.dtsi new file mode 100644 index 000000000000..588117aafaca --- /dev/null +++ b/arch/arm64/boot/dts/renesas/rz-smarc-common.dtsi @@ -0,0 +1,207 @@ +// SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +/* + * Device Tree Source for the RZ/{G2L,G2LC,V2L} SMARC EVK common parts + * + * Copyright (C) 2022 Renesas Electronics Corp. + */ + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/pinctrl/rzg2l-pinctrl.h> + +/* + * SSI-WM8978 + * + * This command is required when Playback/Capture + * + * amixer cset name='Left Input Mixer L2 Switch' on + * amixer cset name='Right Input Mixer R2 Switch' on + * amixer cset name='Headphone Playback Volume' 100 + * amixer cset name='PCM Volume' 100% + * amixer cset name='Input PGA Volume' 25 + * + */ + +/ { + aliases { + serial0 = &scif0; + i2c0 = &i2c0; + i2c1 = &i2c1; + i2c3 = &i2c3; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + audio_mclock: audio_mclock { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <11289600>; + }; + + snd_rzg2l: sound { + compatible = "simple-audio-card"; + simple-audio-card,format = "i2s"; + simple-audio-card,bitclock-master = <&cpu_dai>; + simple-audio-card,frame-master = <&cpu_dai>; + simple-audio-card,mclk-fs = <256>; + + simple-audio-card,widgets = "Microphone", "Microphone Jack"; + simple-audio-card,routing = + "L2", "Mic Bias", + "R2", "Mic Bias", + "Mic Bias", "Microphone Jack"; + + cpu_dai: simple-audio-card,cpu { + sound-dai = <&ssi0>; + }; + + codec_dai: simple-audio-card,codec { + clocks = <&audio_mclock>; + sound-dai = <&wm8978>; + }; + }; + + usb0_vbus_otg: regulator-usb0-vbus-otg { + compatible = "regulator-fixed"; + + regulator-name = "USB0_VBUS_OTG"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + }; + + vccq_sdhi1: regulator-vccq-sdhi1 { + compatible = "regulator-gpio"; + regulator-name = "SDHI1 VccQ"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + gpios = <&pinctrl RZG2L_GPIO(39, 1) GPIO_ACTIVE_HIGH>; + gpios-states = <1>; + states = <3300000 1>, <1800000 0>; + }; +}; + +&audio_clk1{ + clock-frequency = <11289600>; +}; + +&audio_clk2{ + clock-frequency = <12288000>; +}; + +&canfd { + pinctrl-0 = <&can0_pins &can1_pins>; + pinctrl-names = "default"; + status = "okay"; + + channel0 { + status = "okay"; + }; + + channel1 { + status = "okay"; + }; +}; + +&ehci0 { + dr_mode = "otg"; + status = "okay"; +}; + +&ehci1 { + status = "okay"; +}; + +&hsusb { + dr_mode = "otg"; + status = "okay"; +}; + +&i2c0 { + pinctrl-0 = <&i2c0_pins>; + pinctrl-names = "default"; + + status = "okay"; +}; + +&i2c1 { + pinctrl-0 = <&i2c1_pins>; + pinctrl-names = "default"; + + status = "okay"; +}; + +&i2c3 { + pinctrl-0 = <&i2c3_pins>; + pinctrl-names = "default"; + clock-frequency = <400000>; + + status = "okay"; + + wm8978: codec@1a { + compatible = "wlf,wm8978"; + #sound-dai-cells = <0>; + reg = <0x1a>; + }; +}; + +&ohci0 { + dr_mode = "otg"; + status = "okay"; +}; + +&ohci1 { + status = "okay"; +}; + +&phyrst { + status = "okay"; +}; + +&scif0 { + pinctrl-0 = <&scif0_pins>; + pinctrl-names = "default"; + status = "okay"; +}; + +&sdhi1 { + pinctrl-0 = <&sdhi1_pins>; + pinctrl-1 = <&sdhi1_pins_uhs>; + pinctrl-names = "default", "state_uhs"; + + vmmc-supply = <®_3p3v>; + vqmmc-supply = <&vccq_sdhi1>; + bus-width = <4>; + sd-uhs-sdr50; + sd-uhs-sdr104; + status = "okay"; +}; + +&spi1 { + pinctrl-0 = <&spi1_pins>; + pinctrl-names = "default"; + + status = "okay"; +}; + +&ssi0 { + pinctrl-0 = <&ssi0_pins>; + pinctrl-names = "default"; + + status = "okay"; +}; + +&usb2_phy0 { + pinctrl-0 = <&usb0_pins>; + pinctrl-names = "default"; + + vbus-supply = <&usb0_vbus_otg>; + status = "okay"; +}; + +&usb2_phy1 { + pinctrl-0 = <&usb1_pins>; + pinctrl-names = "default"; + + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/renesas/rzg2l-smarc-pinfunction.dtsi b/arch/arm64/boot/dts/renesas/rzg2l-smarc-pinfunction.dtsi new file mode 100644 index 000000000000..9085d8c76ce1 --- /dev/null +++ b/arch/arm64/boot/dts/renesas/rzg2l-smarc-pinfunction.dtsi @@ -0,0 +1,137 @@ +// SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +/* + * Device Tree Source for the RZ/{G2L,V2L} SMARC pincontrol parts + * + * Copyright (C) 2021 Renesas Electronics Corp. + */ + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/pinctrl/rzg2l-pinctrl.h> + +&pinctrl { + pinctrl-0 = <&sound_clk_pins>; + pinctrl-names = "default"; + + can0_pins: can0 { + pinmux = <RZG2L_PORT_PINMUX(10, 1, 2)>, /* TX */ + <RZG2L_PORT_PINMUX(11, 0, 2)>; /* RX */ + }; + + /* SW7 should be at position 2->3 so that GPIO8_CAN0_STB line is activated */ + can0-stb-hog { + gpio-hog; + gpios = <RZG2L_GPIO(42, 2) GPIO_ACTIVE_HIGH>; + output-low; + line-name = "can0_stb"; + }; + + can1_pins: can1 { + pinmux = <RZG2L_PORT_PINMUX(12, 1, 2)>, /* TX */ + <RZG2L_PORT_PINMUX(13, 0, 2)>; /* RX */ + }; + + /* SW8 should be at position 2->3 so that GPIO9_CAN1_STB line is activated */ + can1-stb-hog { + gpio-hog; + gpios = <RZG2L_GPIO(42, 3) GPIO_ACTIVE_HIGH>; + output-low; + line-name = "can1_stb"; + }; + + i2c0_pins: i2c0 { + pins = "RIIC0_SDA", "RIIC0_SCL"; + input-enable; + }; + + i2c1_pins: i2c1 { + pins = "RIIC1_SDA", "RIIC1_SCL"; + input-enable; + }; + + i2c3_pins: i2c3 { + pinmux = <RZG2L_PORT_PINMUX(18, 0, 3)>, /* SDA */ + <RZG2L_PORT_PINMUX(18, 1, 3)>; /* SCL */ + }; + + scif0_pins: scif0 { + pinmux = <RZG2L_PORT_PINMUX(38, 0, 1)>, /* TxD */ + <RZG2L_PORT_PINMUX(38, 1, 1)>; /* RxD */ + }; + + scif2_pins: scif2 { + pinmux = <RZG2L_PORT_PINMUX(48, 0, 1)>, /* TxD */ + <RZG2L_PORT_PINMUX(48, 1, 1)>, /* RxD */ + <RZG2L_PORT_PINMUX(48, 3, 1)>, /* CTS# */ + <RZG2L_PORT_PINMUX(48, 4, 1)>; /* RTS# */ + }; + + sd1-pwr-en-hog { + gpio-hog; + gpios = <RZG2L_GPIO(39, 2) GPIO_ACTIVE_HIGH>; + output-high; + line-name = "sd1_pwr_en"; + }; + + sdhi1_pins: sd1 { + sd1_data { + pins = "SD1_DATA0", "SD1_DATA1", "SD1_DATA2", "SD1_DATA3"; + power-source = <3300>; + }; + + sd1_ctrl { + pins = "SD1_CLK", "SD1_CMD"; + power-source = <3300>; + }; + + sd1_mux { + pinmux = <RZG2L_PORT_PINMUX(19, 0, 1)>; /* SD1_CD */ + }; + }; + + sdhi1_pins_uhs: sd1_uhs { + sd1_data_uhs { + pins = "SD1_DATA0", "SD1_DATA1", "SD1_DATA2", "SD1_DATA3"; + power-source = <1800>; + }; + + sd1_ctrl_uhs { + pins = "SD1_CLK", "SD1_CMD"; + power-source = <1800>; + }; + + sd1_mux_uhs { + pinmux = <RZG2L_PORT_PINMUX(19, 0, 1)>; /* SD1_CD */ + }; + }; + + sound_clk_pins: sound_clk { + pins = "AUDIO_CLK1", "AUDIO_CLK2"; + input-enable; + }; + + spi1_pins: spi1 { + pinmux = <RZG2L_PORT_PINMUX(44, 0, 1)>, /* CK */ + <RZG2L_PORT_PINMUX(44, 1, 1)>, /* MOSI */ + <RZG2L_PORT_PINMUX(44, 2, 1)>, /* MISO */ + <RZG2L_PORT_PINMUX(44, 3, 1)>; /* SSL */ + }; + + ssi0_pins: ssi0 { + pinmux = <RZG2L_PORT_PINMUX(45, 0, 1)>, /* BCK */ + <RZG2L_PORT_PINMUX(45, 1, 1)>, /* RCK */ + <RZG2L_PORT_PINMUX(45, 2, 1)>, /* TXD */ + <RZG2L_PORT_PINMUX(45, 3, 1)>; /* RXD */ + }; + + usb0_pins: usb0 { + pinmux = <RZG2L_PORT_PINMUX(4, 0, 1)>, /* VBUS */ + <RZG2L_PORT_PINMUX(5, 0, 1)>, /* OVC */ + <RZG2L_PORT_PINMUX(5, 1, 1)>; /* OTG_ID */ + }; + + usb1_pins: usb1 { + pinmux = <RZG2L_PORT_PINMUX(42, 0, 1)>, /* VBUS */ + <RZG2L_PORT_PINMUX(42, 1, 1)>; /* OVC */ + }; +}; + diff --git a/arch/arm64/boot/dts/renesas/rzg2l-smarc-som.dtsi b/arch/arm64/boot/dts/renesas/rzg2l-smarc-som.dtsi index 9112e79079a1..aeacd22e9eb0 100644 --- a/arch/arm64/boot/dts/renesas/rzg2l-smarc-som.dtsi +++ b/arch/arm64/boot/dts/renesas/rzg2l-smarc-som.dtsi @@ -1,6 +1,6 @@ // SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) /* - * Device Tree Source for the RZ/G2L SMARC SOM common parts + * Device Tree Source for the RZ/{G2L,V2L} SMARC SOM common parts * * Copyright (C) 2021 Renesas Electronics Corp. */ diff --git a/arch/arm64/boot/dts/renesas/rzg2l-smarc.dtsi b/arch/arm64/boot/dts/renesas/rzg2l-smarc.dtsi index 6f2a8bdfa225..33ddfd18bd56 100644 --- a/arch/arm64/boot/dts/renesas/rzg2l-smarc.dtsi +++ b/arch/arm64/boot/dts/renesas/rzg2l-smarc.dtsi @@ -1,6 +1,6 @@ // SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) /* - * Device Tree Source for the RZ/G2L SMARC EVK common parts + * Device Tree Source for the RZ/{G2L,V2L} SMARC EVK common parts * * Copyright (C) 2021 Renesas Electronics Corp. */ @@ -8,293 +8,15 @@ #include <dt-bindings/gpio/gpio.h> #include <dt-bindings/pinctrl/rzg2l-pinctrl.h> -/* - * SSI-WM8978 - * - * This command is required when Playback/Capture - * - * amixer cset name='Left Input Mixer L2 Switch' on - * amixer cset name='Right Input Mixer R2 Switch' on - * amixer cset name='Headphone Playback Volume' 100 - * amixer cset name='PCM Volume' 100% - * amixer cset name='Input PGA Volume' 25 - * - */ - /* comment the #define statement to disable SCIF2 (SER0) on PMOD1 (CN7) */ #define PMOD1_SER0 1 / { aliases { - serial0 = &scif0; serial1 = &scif2; - i2c0 = &i2c0; - i2c1 = &i2c1; - i2c3 = &i2c3; - }; - - chosen { - stdout-path = "serial0:115200n8"; - }; - - audio_mclock: audio_mclock { - compatible = "fixed-clock"; - #clock-cells = <0>; - clock-frequency = <11289600>; - }; - - snd_rzg2l: sound { - compatible = "simple-audio-card"; - simple-audio-card,format = "i2s"; - simple-audio-card,bitclock-master = <&cpu_dai>; - simple-audio-card,frame-master = <&cpu_dai>; - simple-audio-card,mclk-fs = <256>; - - simple-audio-card,widgets = "Microphone", "Microphone Jack"; - simple-audio-card,routing = - "L2", "Mic Bias", - "R2", "Mic Bias", - "Mic Bias", "Microphone Jack"; - - cpu_dai: simple-audio-card,cpu { - sound-dai = <&ssi0>; - }; - - codec_dai: simple-audio-card,codec { - clocks = <&audio_mclock>; - sound-dai = <&wm8978>; - }; - }; - - usb0_vbus_otg: regulator-usb0-vbus-otg { - compatible = "regulator-fixed"; - - regulator-name = "USB0_VBUS_OTG"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - }; - - vccq_sdhi1: regulator-vccq-sdhi1 { - compatible = "regulator-gpio"; - regulator-name = "SDHI1 VccQ"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <3300000>; - gpios = <&pinctrl RZG2L_GPIO(39, 1) GPIO_ACTIVE_HIGH>; - gpios-states = <1>; - states = <3300000 1>, <1800000 0>; - }; -}; - -&audio_clk1{ - clock-frequency = <11289600>; -}; - -&audio_clk2{ - clock-frequency = <12288000>; -}; - -&canfd { - pinctrl-0 = <&can0_pins &can1_pins>; - pinctrl-names = "default"; - status = "okay"; - - channel0 { - status = "okay"; - }; - - channel1 { - status = "okay"; - }; -}; - -&ehci0 { - dr_mode = "otg"; - status = "okay"; -}; - -&ehci1 { - status = "okay"; -}; - -&hsusb { - dr_mode = "otg"; - status = "okay"; -}; - -&i2c0 { - pinctrl-0 = <&i2c0_pins>; - pinctrl-names = "default"; - - status = "okay"; -}; - -&i2c1 { - pinctrl-0 = <&i2c1_pins>; - pinctrl-names = "default"; - - status = "okay"; -}; - -&i2c3 { - pinctrl-0 = <&i2c3_pins>; - pinctrl-names = "default"; - clock-frequency = <400000>; - - status = "okay"; - - wm8978: codec@1a { - compatible = "wlf,wm8978"; - #sound-dai-cells = <0>; - reg = <0x1a>; - }; -}; - -&ohci0 { - dr_mode = "otg"; - status = "okay"; -}; - -&ohci1 { - status = "okay"; -}; - -&phyrst { - status = "okay"; -}; - -&pinctrl { - pinctrl-0 = <&sound_clk_pins>; - pinctrl-names = "default"; - - can0_pins: can0 { - pinmux = <RZG2L_PORT_PINMUX(10, 1, 2)>, /* TX */ - <RZG2L_PORT_PINMUX(11, 0, 2)>; /* RX */ - }; - - /* SW7 should be at position 2->3 so that GPIO8_CAN0_STB line is activated */ - can0-stb { - gpio-hog; - gpios = <RZG2L_GPIO(42, 2) GPIO_ACTIVE_HIGH>; - output-low; - line-name = "can0_stb"; - }; - - can1_pins: can1 { - pinmux = <RZG2L_PORT_PINMUX(12, 1, 2)>, /* TX */ - <RZG2L_PORT_PINMUX(13, 0, 2)>; /* RX */ - }; - - /* SW8 should be at position 2->3 so that GPIO9_CAN1_STB line is activated */ - can1-stb { - gpio-hog; - gpios = <RZG2L_GPIO(42, 3) GPIO_ACTIVE_HIGH>; - output-low; - line-name = "can1_stb"; - }; - - i2c0_pins: i2c0 { - pins = "RIIC0_SDA", "RIIC0_SCL"; - input-enable; - }; - - i2c1_pins: i2c1 { - pins = "RIIC1_SDA", "RIIC1_SCL"; - input-enable; - }; - - i2c3_pins: i2c3 { - pinmux = <RZG2L_PORT_PINMUX(18, 0, 3)>, /* SDA */ - <RZG2L_PORT_PINMUX(18, 1, 3)>; /* SCL */ - }; - - scif0_pins: scif0 { - pinmux = <RZG2L_PORT_PINMUX(38, 0, 1)>, /* TxD */ - <RZG2L_PORT_PINMUX(38, 1, 1)>; /* RxD */ - }; - - scif2_pins: scif2 { - pinmux = <RZG2L_PORT_PINMUX(48, 0, 1)>, /* TxD */ - <RZG2L_PORT_PINMUX(48, 1, 1)>, /* RxD */ - <RZG2L_PORT_PINMUX(48, 3, 1)>, /* CTS# */ - <RZG2L_PORT_PINMUX(48, 4, 1)>; /* RTS# */ - }; - - sd1-pwr-en-hog { - gpio-hog; - gpios = <RZG2L_GPIO(39, 2) GPIO_ACTIVE_HIGH>; - output-high; - line-name = "sd1_pwr_en"; - }; - - sdhi1_pins: sd1 { - sd1_data { - pins = "SD1_DATA0", "SD1_DATA1", "SD1_DATA2", "SD1_DATA3"; - power-source = <3300>; - }; - - sd1_ctrl { - pins = "SD1_CLK", "SD1_CMD"; - power-source = <3300>; - }; - - sd1_mux { - pinmux = <RZG2L_PORT_PINMUX(19, 0, 1)>; /* SD1_CD */ - }; - }; - - sdhi1_pins_uhs: sd1_uhs { - sd1_data_uhs { - pins = "SD1_DATA0", "SD1_DATA1", "SD1_DATA2", "SD1_DATA3"; - power-source = <1800>; - }; - - sd1_ctrl_uhs { - pins = "SD1_CLK", "SD1_CMD"; - power-source = <1800>; - }; - - sd1_mux_uhs { - pinmux = <RZG2L_PORT_PINMUX(19, 0, 1)>; /* SD1_CD */ - }; - }; - - sound_clk_pins: sound_clk { - pins = "AUDIO_CLK1", "AUDIO_CLK2"; - input-enable; - }; - - spi1_pins: spi1 { - pinmux = <RZG2L_PORT_PINMUX(44, 0, 1)>, /* CK */ - <RZG2L_PORT_PINMUX(44, 1, 1)>, /* MOSI */ - <RZG2L_PORT_PINMUX(44, 2, 1)>, /* MISO */ - <RZG2L_PORT_PINMUX(44, 3, 1)>; /* SSL */ - }; - - ssi0_pins: ssi0 { - pinmux = <RZG2L_PORT_PINMUX(45, 0, 1)>, /* BCK */ - <RZG2L_PORT_PINMUX(45, 1, 1)>, /* RCK */ - <RZG2L_PORT_PINMUX(45, 2, 1)>, /* TXD */ - <RZG2L_PORT_PINMUX(45, 3, 1)>; /* RXD */ - }; - - usb0_pins: usb0 { - pinmux = <RZG2L_PORT_PINMUX(4, 0, 1)>, /* VBUS */ - <RZG2L_PORT_PINMUX(5, 0, 1)>, /* OVC */ - <RZG2L_PORT_PINMUX(5, 1, 1)>; /* OTG_ID */ - }; - - usb1_pins: usb1 { - pinmux = <RZG2L_PORT_PINMUX(42, 0, 1)>, /* VBUS */ - <RZG2L_PORT_PINMUX(42, 1, 1)>; /* OVC */ }; }; -&scif0 { - pinctrl-0 = <&scif0_pins>; - pinctrl-names = "default"; - status = "okay"; -}; - /* * To enable SCIF2 (SER0) on PMOD1 (CN7) * SW1 should be at position 2->3 so that SER0_CTS# line is activated @@ -311,45 +33,3 @@ status = "okay"; }; #endif - -&sdhi1 { - pinctrl-0 = <&sdhi1_pins>; - pinctrl-1 = <&sdhi1_pins_uhs>; - pinctrl-names = "default", "state_uhs"; - - vmmc-supply = <®_3p3v>; - vqmmc-supply = <&vccq_sdhi1>; - bus-width = <4>; - sd-uhs-sdr50; - sd-uhs-sdr104; - status = "okay"; -}; - -&spi1 { - pinctrl-0 = <&spi1_pins>; - pinctrl-names = "default"; - - status = "okay"; -}; - -&ssi0 { - pinctrl-0 = <&ssi0_pins>; - pinctrl-names = "default"; - - status = "okay"; -}; - -&usb2_phy0 { - pinctrl-0 = <&usb0_pins>; - pinctrl-names = "default"; - - vbus-supply = <&usb0_vbus_otg>; - status = "okay"; -}; - -&usb2_phy1 { - pinctrl-0 = <&usb1_pins>; - pinctrl-names = "default"; - - status = "okay"; -}; diff --git a/arch/arm64/boot/dts/renesas/rzg2lc-smarc-pinfunction.dtsi b/arch/arm64/boot/dts/renesas/rzg2lc-smarc-pinfunction.dtsi new file mode 100644 index 000000000000..37ff2091582e --- /dev/null +++ b/arch/arm64/boot/dts/renesas/rzg2lc-smarc-pinfunction.dtsi @@ -0,0 +1,94 @@ +// SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +/* + * Device Tree Source for the RZ/G2LC SMARC pincontrol parts + * + * Copyright (C) 2021 Renesas Electronics Corp. + */ + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/pinctrl/rzg2l-pinctrl.h> + +&pinctrl { + pinctrl-0 = <&sound_clk_pins>; + pinctrl-names = "default"; + + scif0_pins: scif0 { + pinmux = <RZG2L_PORT_PINMUX(38, 0, 1)>, /* TxD */ + <RZG2L_PORT_PINMUX(38, 1, 1)>; /* RxD */ + }; + +#if SW_SCIF_CAN + /* SW8 should be at position 2->1 */ + can1_pins: can1 { + pinmux = <RZG2L_PORT_PINMUX(40, 0, 3)>, /* TxD */ + <RZG2L_PORT_PINMUX(40, 1, 3)>; /* RxD */ + }; +#endif + + scif1_pins: scif1 { + pinmux = <RZG2L_PORT_PINMUX(40, 0, 1)>, /* TxD */ + <RZG2L_PORT_PINMUX(40, 1, 1)>, /* RxD */ + <RZG2L_PORT_PINMUX(41, 0, 1)>, /* CTS# */ + <RZG2L_PORT_PINMUX(41, 1, 1)>; /* RTS# */ + }; + +#if SW_RSPI_CAN + /* SW8 should be at position 2->3 so that GPIO9_CAN1_STB line is activated */ + can1-stb-hog { + gpio-hog; + gpios = <RZG2L_GPIO(44, 3) GPIO_ACTIVE_HIGH>; + output-low; + line-name = "can1_stb"; + }; + + can1_pins: can1 { + pinmux = <RZG2L_PORT_PINMUX(44, 0, 3)>, /* TxD */ + <RZG2L_PORT_PINMUX(44, 1, 3)>; /* RxD */ + }; +#endif + + sd1-pwr-en-hog { + gpio-hog; + gpios = <RZG2L_GPIO(39, 2) GPIO_ACTIVE_HIGH>; + output-high; + line-name = "sd1_pwr_en"; + }; + + sdhi1_pins: sd1 { + sd1_data { + pins = "SD1_DATA0", "SD1_DATA1", "SD1_DATA2", "SD1_DATA3"; + power-source = <3300>; + }; + + sd1_ctrl { + pins = "SD1_CLK", "SD1_CMD"; + power-source = <3300>; + }; + + sd1_mux { + pinmux = <RZG2L_PORT_PINMUX(19, 0, 1)>; /* SD1_CD */ + }; + }; + + sdhi1_pins_uhs: sd1_uhs { + sd1_data_uhs { + pins = "SD1_DATA0", "SD1_DATA1", "SD1_DATA2", "SD1_DATA3"; + power-source = <1800>; + }; + + sd1_ctrl_uhs { + pins = "SD1_CLK", "SD1_CMD"; + power-source = <1800>; + }; + + sd1_mux_uhs { + pinmux = <RZG2L_PORT_PINMUX(19, 0, 1)>; /* SD1_CD */ + }; + }; + + sound_clk_pins: sound_clk { + pins = "AUDIO_CLK1", "AUDIO_CLK2"; + input-enable; + }; +}; + diff --git a/arch/arm64/boot/dts/renesas/rzg2lc-smarc-som.dtsi b/arch/arm64/boot/dts/renesas/rzg2lc-smarc-som.dtsi new file mode 100644 index 000000000000..88a7938017aa --- /dev/null +++ b/arch/arm64/boot/dts/renesas/rzg2lc-smarc-som.dtsi @@ -0,0 +1,222 @@ +// SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +/* + * Device Tree Source for the RZ/G2LC SMARC SOM common parts + * + * Copyright (C) 2021 Renesas Electronics Corp. + */ + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/pinctrl/rzg2l-pinctrl.h> + +/ { + aliases { + ethernet0 = ð0; + }; + + chosen { + bootargs = "ignore_loglevel rw root=/dev/nfs ip=on"; + }; + + memory@48000000 { + device_type = "memory"; + /* first 128MB is reserved for secure area. */ + reg = <0x0 0x48000000 0x0 0x38000000>; + }; + + reg_1p8v: regulator0 { + compatible = "regulator-fixed"; + regulator-name = "fixed-1.8V"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-boot-on; + regulator-always-on; + }; + + reg_3p3v: regulator1 { + compatible = "regulator-fixed"; + regulator-name = "fixed-3.3V"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + regulator-always-on; + }; + + vccq_sdhi0: regulator-vccq-sdhi0 { + compatible = "regulator-gpio"; + + regulator-name = "SDHI0 VccQ"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + states = <3300000 1>, <1800000 0>; + regulator-boot-on; + gpios = <&pinctrl RZG2L_GPIO(39, 0) GPIO_ACTIVE_HIGH>; + regulator-always-on; + }; +}; + +ð0 { + pinctrl-0 = <ð0_pins>; + pinctrl-names = "default"; + phy-handle = <&phy0>; + phy-mode = "rgmii-id"; + status = "okay"; + + phy0: ethernet-phy@7 { + compatible = "ethernet-phy-id0022.1640", + "ethernet-phy-ieee802.3-c22"; + reg = <7>; + rxc-skew-psec = <2400>; + txc-skew-psec = <2400>; + rxdv-skew-psec = <0>; + txdv-skew-psec = <0>; + rxd0-skew-psec = <0>; + rxd1-skew-psec = <0>; + rxd2-skew-psec = <0>; + rxd3-skew-psec = <0>; + txd0-skew-psec = <0>; + txd1-skew-psec = <0>; + txd2-skew-psec = <0>; + txd3-skew-psec = <0>; + }; +}; + +&extal_clk { + clock-frequency = <24000000>; +}; + +&pinctrl { + eth0_pins: eth0 { + pinmux = <RZG2L_PORT_PINMUX(28, 1, 1)>, /* ET0_LINKSTA */ + <RZG2L_PORT_PINMUX(27, 1, 1)>, /* ET0_MDC */ + <RZG2L_PORT_PINMUX(28, 0, 1)>, /* ET0_MDIO */ + <RZG2L_PORT_PINMUX(20, 0, 1)>, /* ET0_TXC */ + <RZG2L_PORT_PINMUX(20, 1, 1)>, /* ET0_TX_CTL */ + <RZG2L_PORT_PINMUX(20, 2, 1)>, /* ET0_TXD0 */ + <RZG2L_PORT_PINMUX(21, 0, 1)>, /* ET0_TXD1 */ + <RZG2L_PORT_PINMUX(21, 1, 1)>, /* ET0_TXD2 */ + <RZG2L_PORT_PINMUX(22, 0, 1)>, /* ET0_TXD3 */ + <RZG2L_PORT_PINMUX(24, 0, 1)>, /* ET0_RXC */ + <RZG2L_PORT_PINMUX(24, 1, 1)>, /* ET0_RX_CTL */ + <RZG2L_PORT_PINMUX(25, 0, 1)>, /* ET0_RXD0 */ + <RZG2L_PORT_PINMUX(25, 1, 1)>, /* ET0_RXD1 */ + <RZG2L_PORT_PINMUX(26, 0, 1)>, /* ET0_RXD2 */ + <RZG2L_PORT_PINMUX(26, 1, 1)>; /* ET0_RXD3 */ + }; + + gpio-sd0-pwr-en-hog { + gpio-hog; + gpios = <RZG2L_GPIO(18, 1) GPIO_ACTIVE_HIGH>; + output-high; + line-name = "gpio_sd0_pwr_en"; + }; + + /* + * SD0 device selection is XOR between GPIO_SD0_DEV_SEL and SW1[2] + * The below switch logic can be used to select the device between + * eMMC and microSD, after setting GPIO_SD0_DEV_SEL to high in DT. + * SW1[2] should be at OFF position to enable 64 GB eMMC + * SW1[2] should be at position ON to enable uSD card CN3 + */ + gpio-sd0-dev-sel-hog { + gpio-hog; + gpios = <RZG2L_GPIO(40, 2) GPIO_ACTIVE_HIGH>; + output-high; + line-name = "gpio_sd0_dev_sel"; + }; + + sdhi0_emmc_pins: sd0emmc { + sd0_emmc_data { + pins = "SD0_DATA0", "SD0_DATA1", "SD0_DATA2", "SD0_DATA3", + "SD0_DATA4", "SD0_DATA5", "SD0_DATA6", "SD0_DATA7"; + power-source = <1800>; + }; + + sd0_emmc_ctrl { + pins = "SD0_CLK", "SD0_CMD"; + power-source = <1800>; + }; + + sd0_emmc_rst { + pins = "SD0_RST#"; + power-source = <1800>; + }; + }; + + sdhi0_pins: sd0 { + sd0_data { + pins = "SD0_DATA0", "SD0_DATA1", "SD0_DATA2", "SD0_DATA3"; + power-source = <3300>; + }; + + sd0_ctrl { + pins = "SD0_CLK", "SD0_CMD"; + power-source = <3300>; + }; + + sd0_mux { + pinmux = <RZG2L_PORT_PINMUX(18, 0, 1)>; /* SD0_CD */ + }; + }; + + sdhi0_pins_uhs: sd0_uhs { + sd0_data_uhs { + pins = "SD0_DATA0", "SD0_DATA1", "SD0_DATA2", "SD0_DATA3"; + power-source = <1800>; + }; + + sd0_ctrl_uhs { + pins = "SD0_CLK", "SD0_CMD"; + power-source = <1800>; + }; + + sd0_mux_uhs { + pinmux = <RZG2L_PORT_PINMUX(18, 0, 1)>; /* SD0_CD */ + }; + }; +}; + +#if (!SW_SD0_DEV_SEL) +&sdhi0 { + pinctrl-0 = <&sdhi0_pins>; + pinctrl-1 = <&sdhi0_pins_uhs>; + pinctrl-names = "default", "state_uhs"; + + vmmc-supply = <®_3p3v>; + vqmmc-supply = <&vccq_sdhi0>; + bus-width = <4>; + sd-uhs-sdr50; + sd-uhs-sdr104; + status = "okay"; +}; +#endif + +#if SW_SD0_DEV_SEL +&sdhi0 { + pinctrl-0 = <&sdhi0_emmc_pins>; + pinctrl-1 = <&sdhi0_emmc_pins>; + pinctrl-names = "default", "state_uhs"; + + vmmc-supply = <®_3p3v>; + vqmmc-supply = <®_1p8v>; + bus-width = <8>; + mmc-hs200-1_8v; + non-removable; + fixed-emmc-driver-type = <1>; + status = "okay"; +}; +#endif + +&wdt0 { + status = "okay"; + timeout-sec = <60>; +}; + +&wdt1 { + status = "okay"; + timeout-sec = <60>; +}; + +&wdt2 { + status = "okay"; + timeout-sec = <60>; +}; diff --git a/arch/arm64/boot/dts/renesas/rzg2lc-smarc.dtsi b/arch/arm64/boot/dts/renesas/rzg2lc-smarc.dtsi new file mode 100644 index 000000000000..df7631fe5fac --- /dev/null +++ b/arch/arm64/boot/dts/renesas/rzg2lc-smarc.dtsi @@ -0,0 +1,77 @@ +// SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +/* + * Device Tree Source for the RZ/G2LC SMARC EVK parts + * + * Copyright (C) 2022 Renesas Electronics Corp. + */ + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/pinctrl/rzg2l-pinctrl.h> + +/* + * DIP-Switch SW1 setting on SoM + * 1 : High; 0: Low + * SW1-2 : SW_SD0_DEV_SEL (1: eMMC; 0: uSD) + * SW1-3 : SW_SCIF_CAN (1: CAN1; 0: SCIF1) + * SW1-4 : SW_RSPI_CAN (1: CAN1; 0: RSPI1) + * SW1-5 : SW_I2S0_I2S1 (1: I2S2 (HDMI audio); 0: I2S0) + * Please change below macros according to SW1 setting + */ + +#define SW_SD0_DEV_SEL 1 + +#define SW_SCIF_CAN 0 +#if (SW_SCIF_CAN) +/* Due to HW routing, SW_RSPI_CAN is always 0 when SW_SCIF_CAN is set to 1 */ +#define SW_RSPI_CAN 0 +#else +/* Please set SW_RSPI_CAN. Default value is 1 */ +#define SW_RSPI_CAN 1 +#endif + +#if (SW_SCIF_CAN & SW_RSPI_CAN) +#error "Can not set 1 to both SW_SCIF_CAN and SW_RSPI_CAN due to HW routing" +#endif + +#include "rzg2lc-smarc-som.dtsi" +#include "rzg2lc-smarc-pinfunction.dtsi" +#include "rz-smarc-common.dtsi" + +/* comment the #define statement to disable SCIF1 (SER0) on PMOD1 (CN7) */ +#define PMOD1_SER0 1 + +/ { + aliases { + serial1 = &scif1; + }; +}; + +#if (SW_SCIF_CAN || SW_RSPI_CAN) +&canfd { + pinctrl-0 = <&can1_pins>; + /delete-node/ channel@0; +}; +#else +&canfd { + /delete-property/ pinctrl-0; + /delete-property/ pinctrl-names; + status = "disabled"; +}; +#endif + +/* + * To enable SCIF1 (SER0) on PMOD1 (CN7), On connector board + * SW1 should be at position 2->3 so that SER0_CTS# line is activated + * SW2 should be at position 2->3 so that SER0_TX line is activated + * SW3 should be at position 2->3 so that SER0_RX line is activated + * SW4 should be at position 2->3 so that SER0_RTS# line is activated + */ +#if (!SW_SCIF_CAN && PMOD1_SER0) +&scif1 { + pinctrl-0 = <&scif1_pins>; + pinctrl-names = "default"; + + uart-has-rtscts; + status = "okay"; +}; +#endif diff --git a/arch/arm64/boot/dts/renesas/ulcb-kf.dtsi b/arch/arm64/boot/dts/renesas/ulcb-kf.dtsi index 61bd4df09df0..ae532cd21708 100644 --- a/arch/arm64/boot/dts/renesas/ulcb-kf.dtsi +++ b/arch/arm64/boot/dts/renesas/ulcb-kf.dtsi @@ -26,6 +26,38 @@ select-gpios = <&gpio_exp_75 13 GPIO_ACTIVE_HIGH>; }; + hdmi1-out { + compatible = "hdmi-connector"; + type = "a"; + + port { + hdmi1_con: endpoint { + remote-endpoint = <&adv7513_out>; + }; + }; + }; + + accel_3v3: regulator-acc-3v3 { + compatible = "regulator-fixed"; + regulator-name = "accel-3v3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + + hdmi_1v8: regulator-hdmi-1v8 { + compatible = "regulator-fixed"; + regulator-name = "hdmi-1v8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + hdmi_3v3: regulator-hdmi-3v3 { + compatible = "regulator-fixed"; + regulator-name = "hdmi-3v3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + snd_3p3v: regulator-snd_3p3v { compatible = "regulator-fixed"; regulator-name = "snd-3.3v"; @@ -65,6 +97,10 @@ status = "okay"; }; +&du_out_rgb { + remote-endpoint = <&adv7513_in>; +}; + &ehci0 { dr_mode = "otg"; status = "okay"; @@ -91,12 +127,72 @@ reg = <0x71>; reset-gpios = <&gpio5 3 GPIO_ACTIVE_LOW>; + /* HDMIoSDA, HDMIoSCL */ + i2c@4 { + #address-cells = <1>; + #size-cells = <0>; + reg = <4>; + + hdmi@3d { + compatible = "adi,adv7513"; + reg = <0x3d>; + + pinctrl-0 = <&hdmi1_pins>; + pinctrl-names = "default"; + + interrupt-parent = <&gpio2>; + interrupts = <14 IRQ_TYPE_LEVEL_LOW>; + + clocks = <&cs2000>; + clock-names = "cec"; + + pd-gpios = <&gpio_exp_75 5 GPIO_ACTIVE_LOW>; + + avdd-supply = <&hdmi_1v8>; + dvdd-supply = <&hdmi_1v8>; + pvdd-supply = <&hdmi_1v8>; + dvdd-3v-supply = <&hdmi_3v3>; + bgvdd-supply = <&hdmi_1v8>; + + adi,input-depth = <8>; + adi,input-colorspace = "rgb"; + adi,input-clock = "1x"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + adv7513_in: endpoint { + remote-endpoint = <&du_out_rgb>; + }; + }; + + port@1 { + reg = <1>; + adv7513_out: endpoint { + remote-endpoint = <&hdmi1_con>; + }; + }; + }; + }; + }; + /* Audio_SDA, Audio_SCL */ i2c@7 { #address-cells = <1>; #size-cells = <0>; reg = <7>; + accelerometer@1d { + compatible = "st,lsm9ds0-imu"; + reg = <0x1d>; + + vdd-supply = <&accel_3v3>; + vddio-supply = <&accel_3v3>; + }; + pcm3168a: audio-codec@44 { #sound-dai-cells = <0>; compatible = "ti,pcm3168a"; @@ -131,6 +227,14 @@ }; }; }; + + gyroscope@6b { + compatible = "st,lsm9ds0-gyro"; + reg = <0x6b>; + + vdd-supply = <&accel_3v3>; + vddio-supply = <&accel_3v3>; + }; }; }; @@ -264,6 +368,19 @@ function = "can1"; }; + hdmi1_pins: hdmi1 { + adv7513-interrupt { + pins = "GP_2_14"; + bias-pull-up; + }; + + du { + groups = "du_rgb888", "du_sync", "du_clk_out_0", + "du_disp"; + function = "du"; + }; + }; + hscif0_pins: hscif0 { groups = "hscif0_data", "hscif0_ctrl"; function = "hscif0"; @@ -297,17 +414,14 @@ &sound_pcm_pins>; ports { - /* rsnd_port0/1 are on salvator-common */ + /* rsnd_port0/1 are defined in ulcb.dtsi */ rsnd_port2: port@2 { reg = <2>; rsnd_for_pcm3168a_play: endpoint { remote-endpoint = <&pcm3168a_endpoint_p>; - - dai-format = "i2s"; - bitclock-master = <&rsnd_for_pcm3168a_play>; - frame-master = <&rsnd_for_pcm3168a_play>; + bitclock-master; + frame-master; dai-tdm-slot-num = <8>; - playback = <&ssi3>; }; }; @@ -315,12 +429,9 @@ reg = <3>; rsnd_for_pcm3168a_capture: endpoint { remote-endpoint = <&pcm3168a_endpoint_c>; - - dai-format = "i2s"; - bitclock-master = <&rsnd_for_pcm3168a_capture>; - frame-master = <&rsnd_for_pcm3168a_capture>; + bitclock-master; + frame-master; dai-tdm-slot-num = <6>; - capture = <&ssi4>; }; }; @@ -360,10 +471,10 @@ }; &sound_card { - dais = <&rsnd_port0 /* ak4613 */ - &rsnd_port1 /* HDMI0 */ - &rsnd_port2 /* pcm3168a playback */ - &rsnd_port3 /* pcm3168a capture */ + links = <&rsnd_port0 /* ak4613 */ + &rsnd_port1 /* HDMI0 */ + &rsnd_port2 /* pcm3168a playback */ + &rsnd_port3 /* pcm3168a capture */ >; }; diff --git a/arch/arm64/boot/dts/renesas/ulcb.dtsi b/arch/arm64/boot/dts/renesas/ulcb.dtsi index a7e93df4ced8..b4bdb2d7e4ba 100644 --- a/arch/arm64/boot/dts/renesas/ulcb.dtsi +++ b/arch/arm64/boot/dts/renesas/ulcb.dtsi @@ -95,11 +95,11 @@ }; sound_card: sound { - compatible = "audio-graph-card"; + compatible = "audio-graph-card2"; label = "rcar-sound"; - dais = <&rsnd_port0 /* ak4613 */ - &rsnd_port1 /* HDMI0 */ + links = <&rsnd_port0 /* ak4613 */ + &rsnd_port1 /* HDMI0 */ >; }; @@ -408,11 +408,8 @@ reg = <0>; rsnd_for_ak4613: endpoint { remote-endpoint = <&ak4613_endpoint>; - - dai-format = "left_j"; - bitclock-master = <&rsnd_for_ak4613>; - frame-master = <&rsnd_for_ak4613>; - + bitclock-master; + frame-master; playback = <&ssi0>, <&src0>, <&dvc0>; capture = <&ssi1>, <&src1>, <&dvc1>; }; @@ -421,11 +418,8 @@ reg = <1>; rsnd_for_hdmi: endpoint { remote-endpoint = <&dw_hdmi0_snd_in>; - - dai-format = "i2s"; - bitclock-master = <&rsnd_for_hdmi>; - frame-master = <&rsnd_for_hdmi>; - + bitclock-master; + frame-master; playback = <&ssi2>; }; }; diff --git a/arch/arm64/boot/dts/rockchip/Makefile b/arch/arm64/boot/dts/rockchip/Makefile index 479906f3ad7b..4ae9f35434b8 100644 --- a/arch/arm64/boot/dts/rockchip/Makefile +++ b/arch/arm64/boot/dts/rockchip/Makefile @@ -56,5 +56,8 @@ dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-rockpro64.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-sapphire.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-sapphire-excavator.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399pro-rock-pi-n10.dtb +dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3566-pinenote-v1.1.dtb +dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3566-pinenote-v1.2.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3566-quartz64-a.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3568-evb1-v10.dtb +dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3568-bpi-r2-pro.dtb diff --git a/arch/arm64/boot/dts/rockchip/rk3328-a1.dts b/arch/arm64/boot/dts/rockchip/rk3328-a1.dts index de2d3e88e27f..40bf808642b9 100644 --- a/arch/arm64/boot/dts/rockchip/rk3328-a1.dts +++ b/arch/arm64/boot/dts/rockchip/rk3328-a1.dts @@ -160,6 +160,7 @@ pinctrl-0 = <&pmic_int_l>; rockchip,system-power-controller; wakeup-source; + #clock-cells = <0>; vcc1-supply = <&vcc_sys>; vcc2-supply = <&vcc_sys>; diff --git a/arch/arm64/boot/dts/rockchip/rk3399-firefly.dts b/arch/arm64/boot/dts/rockchip/rk3399-firefly.dts index c4dd2a6b4836..c654b6b02f3f 100644 --- a/arch/arm64/boot/dts/rockchip/rk3399-firefly.dts +++ b/arch/arm64/boot/dts/rockchip/rk3399-firefly.dts @@ -245,12 +245,12 @@ vdd_log: vdd-log { compatible = "pwm-regulator"; pwms = <&pwm2 0 25000 1>; + pwm-supply = <&vcc_sys>; regulator-name = "vdd_log"; regulator-always-on; regulator-boot-on; regulator-min-microvolt = <430000>; regulator-max-microvolt = <1400000>; - vin-supply = <&vcc_sys>; }; }; @@ -298,6 +298,11 @@ status = "okay"; }; +&gpu { + mali-supply = <&vdd_gpu>; + status = "okay"; +}; + &hdmi { ddc-i2c-bus = <&i2c3>; pinctrl-names = "default"; @@ -770,8 +775,8 @@ sd-uhs-sdr104; /* Power supply */ - vqmmc-supply = &vcc1v8_s3; /* IO line */ - vmmc-supply = &vcc_sdio; /* card's power */ + vqmmc-supply = <&vcc1v8_s3>; /* IO line */ + vmmc-supply = <&vcc_sdio>; /* card's power */ #address-cells = <1>; #size-cells = <0>; diff --git a/arch/arm64/boot/dts/rockchip/rk3399-gru-chromebook.dtsi b/arch/arm64/boot/dts/rockchip/rk3399-gru-chromebook.dtsi index 9b2c679f5eca..3355fb90fa54 100644 --- a/arch/arm64/boot/dts/rockchip/rk3399-gru-chromebook.dtsi +++ b/arch/arm64/boot/dts/rockchip/rk3399-gru-chromebook.dtsi @@ -462,7 +462,7 @@ ap_i2c_tp: &i2c5 { }; &cros_ec { - cros_ec_pwm: ec-pwm { + cros_ec_pwm: pwm { compatible = "google,cros-ec-pwm"; #pwm-cells = <1>; }; diff --git a/arch/arm64/boot/dts/rockchip/rk3399-khadas-edge.dtsi b/arch/arm64/boot/dts/rockchip/rk3399-khadas-edge.dtsi index f1fcc6b5b402..7ba3ed24084b 100644 --- a/arch/arm64/boot/dts/rockchip/rk3399-khadas-edge.dtsi +++ b/arch/arm64/boot/dts/rockchip/rk3399-khadas-edge.dtsi @@ -80,12 +80,12 @@ vdd_log: vdd-log { compatible = "pwm-regulator"; pwms = <&pwm2 0 25000 1>; + pwm-supply = <&vsys_3v3>; regulator-name = "vdd_log"; regulator-always-on; regulator-boot-on; regulator-min-microvolt = <800000>; regulator-max-microvolt = <1400000>; - vin-supply = <&vsys_3v3>; }; vsys: vsys { diff --git a/arch/arm64/boot/dts/rockchip/rk3399-leez-p710.dts b/arch/arm64/boot/dts/rockchip/rk3399-leez-p710.dts index e890166e7fd4..5bbe74bed0ea 100644 --- a/arch/arm64/boot/dts/rockchip/rk3399-leez-p710.dts +++ b/arch/arm64/boot/dts/rockchip/rk3399-leez-p710.dts @@ -102,12 +102,12 @@ vdd_log: vdd-log { compatible = "pwm-regulator"; pwms = <&pwm2 0 25000 1>; + pwm-supply = <&vcc5v0_sys>; regulator-name = "vdd_log"; regulator-always-on; regulator-boot-on; regulator-min-microvolt = <800000>; regulator-max-microvolt = <1400000>; - vin-supply = <&vcc5v0_sys>; }; }; diff --git a/arch/arm64/boot/dts/rockchip/rk3399-orangepi.dts b/arch/arm64/boot/dts/rockchip/rk3399-orangepi.dts index 04b54abea3cc..9d3a718f66f6 100644 --- a/arch/arm64/boot/dts/rockchip/rk3399-orangepi.dts +++ b/arch/arm64/boot/dts/rockchip/rk3399-orangepi.dts @@ -166,12 +166,12 @@ vdd_log: vdd-log { compatible = "pwm-regulator"; pwms = <&pwm2 0 25000 1>; + pwm-supply = <&vcc_sys>; regulator-name = "vdd_log"; regulator-always-on; regulator-boot-on; regulator-min-microvolt = <800000>; regulator-max-microvolt = <1400000>; - vin-supply = <&vcc_sys>; }; }; diff --git a/arch/arm64/boot/dts/rockchip/rk3399-pinebook-pro.dts b/arch/arm64/boot/dts/rockchip/rk3399-pinebook-pro.dts index c2f021a1a18f..d6b68d77d63a 100644 --- a/arch/arm64/boot/dts/rockchip/rk3399-pinebook-pro.dts +++ b/arch/arm64/boot/dts/rockchip/rk3399-pinebook-pro.dts @@ -243,12 +243,12 @@ vdd_log: vdd-log { compatible = "pwm-regulator"; pwms = <&pwm2 0 25000 1>; + pwm-supply = <&vcc_sysin>; regulator-name = "vdd_log"; regulator-always-on; regulator-boot-on; regulator-min-microvolt = <800000>; regulator-max-microvolt = <1400000>; - vin-supply = <&vcc_sysin>; regulator-state-mem { regulator-on-in-suspend; @@ -472,8 +472,6 @@ vcc10-supply = <&vcc_sysin>; vcc11-supply = <&vcc_sysin>; vcc12-supply = <&vcc3v3_sys>; - vcc13-supply = <&vcc_sysin>; - vcc14-supply = <&vcc_sysin>; regulators { /* rk3399 center logic supply */ diff --git a/arch/arm64/boot/dts/rockchip/rk3399-puma.dtsi b/arch/arm64/boot/dts/rockchip/rk3399-puma.dtsi index 08fa00364b42..b1ac3a89f259 100644 --- a/arch/arm64/boot/dts/rockchip/rk3399-puma.dtsi +++ b/arch/arm64/boot/dts/rockchip/rk3399-puma.dtsi @@ -78,6 +78,17 @@ regulator-min-microvolt = <5000000>; regulator-max-microvolt = <5000000>; }; + + vdd_log: vdd-log { + compatible = "pwm-regulator"; + pwms = <&pwm2 0 25000 1>; + pwm-supply = <&vcc5v0_sys>; + regulator-name = "vdd_log"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <1400000>; + regulator-always-on; + regulator-boot-on; + }; }; &cpu_b0 { diff --git a/arch/arm64/boot/dts/rockchip/rk3399-roc-pc.dtsi b/arch/arm64/boot/dts/rockchip/rk3399-roc-pc.dtsi index d1aaf8e83391..0e45cc2d195b 100644 --- a/arch/arm64/boot/dts/rockchip/rk3399-roc-pc.dtsi +++ b/arch/arm64/boot/dts/rockchip/rk3399-roc-pc.dtsi @@ -310,8 +310,6 @@ vcc10-supply = <&vcc3v3_sys>; vcc11-supply = <&vcc3v3_sys>; vcc12-supply = <&vcc3v3_sys>; - vcc13-supply = <&vcc3v3_sys>; - vcc14-supply = <&vcc3v3_sys>; vddio-supply = <&vcc_3v0>; regulators { diff --git a/arch/arm64/boot/dts/rockchip/rk3399-rock-pi-4.dtsi b/arch/arm64/boot/dts/rockchip/rk3399-rock-pi-4.dtsi index 92acf6ea299b..401e1ae9d944 100644 --- a/arch/arm64/boot/dts/rockchip/rk3399-rock-pi-4.dtsi +++ b/arch/arm64/boot/dts/rockchip/rk3399-rock-pi-4.dtsi @@ -144,12 +144,12 @@ vdd_log: vdd-log { compatible = "pwm-regulator"; pwms = <&pwm2 0 25000 1>; + pwm-supply = <&vcc5v0_sys>; regulator-name = "vdd_log"; regulator-always-on; regulator-boot-on; regulator-min-microvolt = <800000>; regulator-max-microvolt = <1400000>; - vin-supply = <&vcc5v0_sys>; }; }; diff --git a/arch/arm64/boot/dts/rockchip/rk3399-rockpro64.dtsi b/arch/arm64/boot/dts/rockchip/rk3399-rockpro64.dtsi index 83db4ca67334..45e77f86d329 100644 --- a/arch/arm64/boot/dts/rockchip/rk3399-rockpro64.dtsi +++ b/arch/arm64/boot/dts/rockchip/rk3399-rockpro64.dtsi @@ -213,12 +213,12 @@ vdd_log: vdd-log { compatible = "pwm-regulator"; pwms = <&pwm2 0 25000 1>; + pwm-supply = <&vcc5v0_sys>; regulator-name = "vdd_log"; regulator-always-on; regulator-boot-on; regulator-min-microvolt = <800000>; regulator-max-microvolt = <1700000>; - vin-supply = <&vcc5v0_sys>; }; }; diff --git a/arch/arm64/boot/dts/rockchip/rk3399-sapphire.dtsi b/arch/arm64/boot/dts/rockchip/rk3399-sapphire.dtsi index 46b0f97a0b1c..2aa0fad8f893 100644 --- a/arch/arm64/boot/dts/rockchip/rk3399-sapphire.dtsi +++ b/arch/arm64/boot/dts/rockchip/rk3399-sapphire.dtsi @@ -133,12 +133,12 @@ vdd_log: vdd-log { compatible = "pwm-regulator"; pwms = <&pwm2 0 25000 1>; + pwm-supply = <&vcc_sys>; regulator-name = "vdd_log"; regulator-always-on; regulator-boot-on; regulator-min-microvolt = <800000>; regulator-max-microvolt = <1400000>; - vin-supply = <&vcc_sys>; }; }; diff --git a/arch/arm64/boot/dts/rockchip/rk3566-pinenote-v1.1.dts b/arch/arm64/boot/dts/rockchip/rk3566-pinenote-v1.1.dts new file mode 100644 index 000000000000..5b0b7ebf9fee --- /dev/null +++ b/arch/arm64/boot/dts/rockchip/rk3566-pinenote-v1.1.dts @@ -0,0 +1,18 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) + +/dts-v1/; + +#include "rk3566-pinenote.dtsi" + +/ { + model = "Pine64 PineNote v1.1"; + compatible = "pine64,pinenote-v1.1", "pine64,pinenote", "rockchip,rk3566"; +}; + +&pmu_io_domains { + vccio7-supply = <&vcc_1v8>; +}; + +&spk_amp { + VCC-supply = <&dcdc_boost>; +}; diff --git a/arch/arm64/boot/dts/rockchip/rk3566-pinenote-v1.2.dts b/arch/arm64/boot/dts/rockchip/rk3566-pinenote-v1.2.dts new file mode 100644 index 000000000000..6bbc4c675d64 --- /dev/null +++ b/arch/arm64/boot/dts/rockchip/rk3566-pinenote-v1.2.dts @@ -0,0 +1,18 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) + +/dts-v1/; + +#include "rk3566-pinenote.dtsi" + +/ { + model = "Pine64 PineNote v1.2"; + compatible = "pine64,pinenote-v1.2", "pine64,pinenote", "rockchip,rk3566"; +}; + +&pmu_io_domains { + vccio7-supply = <&vcc_3v3>; +}; + +&spk_amp { + VCC-supply = <&vcc_bat>; +}; diff --git a/arch/arm64/boot/dts/rockchip/rk3566-pinenote.dtsi b/arch/arm64/boot/dts/rockchip/rk3566-pinenote.dtsi new file mode 100644 index 000000000000..fea748adfa90 --- /dev/null +++ b/arch/arm64/boot/dts/rockchip/rk3566-pinenote.dtsi @@ -0,0 +1,639 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/gpio-keys.h> +#include <dt-bindings/input/input.h> +#include <dt-bindings/leds/common.h> +#include <dt-bindings/pinctrl/rockchip.h> + +#include "rk3566.dtsi" + +/ { + aliases { + mmc0 = &sdhci; + }; + + chosen { + stdout-path = "serial2:1500000n8"; + }; + + adc-keys { + compatible = "adc-keys"; + io-channels = <&saradc 0>; + io-channel-names = "buttons"; + keyup-threshold-microvolt = <1750000>; + + recovery { + label = "recovery"; + linux,code = <KEY_VENDOR>; + press-threshold-microvolt = <0>; + }; + }; + + spk_amp: audio-amplifier { + compatible = "simple-audio-amplifier"; + enable-gpios = <&gpio3 RK_PC4 GPIO_ACTIVE_HIGH>; + pinctrl-0 = <&spk_amp_enable_h>; + pinctrl-names = "default"; + sound-name-prefix = "Speaker Amp"; + }; + + dmic_codec: dmic-codec { + compatible = "dmic-codec"; + num-channels = <6>; + #sound-dai-cells = <0>; + }; + + gpio-keys { + compatible = "gpio-keys"; + pinctrl-0 = <&hall_int_l>; + pinctrl-names = "default"; + + cover { + label = "cover"; + gpios = <&gpio0 RK_PC7 GPIO_ACTIVE_LOW>; + linux,input-type = <EV_SW>; + linux,code = <SW_MACHINE_COVER>; + linux,can-disable; + wakeup-event-action = <EV_ACT_DEASSERTED>; + wakeup-source; + }; + }; + + gpio-leds { + compatible = "gpio-leds"; + pinctrl-0 = <&led_pin>; + pinctrl-names = "default"; + + led-0 { + color = <LED_COLOR_ID_WHITE>; + function = LED_FUNCTION_CHARGING; + gpios = <&gpio3 RK_PC5 GPIO_ACTIVE_HIGH>; + }; + }; + + sdio_pwrseq: sdio-pwrseq { + compatible = "mmc-pwrseq-simple"; + clocks = <&rk817 1>; + clock-names = "ext_clock"; + pinctrl-0 = <&wifi_enable_h>; + pinctrl-names = "default"; + reset-gpios = <&gpio0 RK_PC6 GPIO_ACTIVE_LOW>; + }; + + sound { + compatible = "simple-audio-card"; + simple-audio-card,name = "PineNote"; + simple-audio-card,aux-devs = <&spk_amp>; + simple-audio-card,widgets = "Headphone", "Headphones", + "Speaker", "Internal Speakers"; + simple-audio-card,routing = "Headphones", "HPOL", + "Headphones", "HPOR", + "Internal Speakers", "Speaker Amp OUTL", + "Internal Speakers", "Speaker Amp OUTR", + "Speaker Amp INL", "HPOL", + "Speaker Amp INR", "HPOR"; + simple-audio-card,pin-switches = "Internal Speakers"; + #address-cells = <1>; + #size-cells = <0>; + + simple-audio-card,dai-link@0 { + reg = <0>; + bitclock-master = <&link0_cpu>; + format = "i2s"; + frame-master = <&link0_cpu>; + mclk-fs = <256>; + + link0_cpu: cpu { + sound-dai = <&i2s1_8ch>; + }; + + link0_codec: codec { + sound-dai = <&rk817>; + }; + }; + + simple-audio-card,dai-link@1 { + reg = <1>; + bitclock-master = <&link1_cpu>; + format = "pdm"; + frame-master = <&link1_cpu>; + + link1_cpu: cpu { + sound-dai = <&pdm>; + }; + + link1_codec: codec { + sound-dai = <&dmic_codec>; + }; + }; + }; + + vbat_4g: vbat-4g { + compatible = "regulator-fixed"; + regulator-name = "vbat_4g"; + regulator-min-microvolt = <3800000>; + regulator-max-microvolt = <3800000>; + /* powered by vcc_bat, enabled by vbat_4g_en */ + vin-supply = <&vbat_4g_en>; + }; + + vcc_1v8: vcc-1v8 { + compatible = "regulator-fixed"; + regulator-name = "vcc_1v8"; + regulator-always-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + /* powered by vcc_sys, enabled by vcc_1v8_en */ + vin-supply = <&vcc_1v8_en>; + }; + + vcc_bat: vcc-bat { + compatible = "regulator-fixed"; + regulator-name = "vcc_bat"; + regulator-always-on; + regulator-min-microvolt = <3800000>; + regulator-max-microvolt = <3800000>; + }; + + vcc_hall_3v3: vcc-hall-3v3 { + compatible = "regulator-fixed"; + regulator-name = "vcc_hall_3v3"; + regulator-always-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + vin-supply = <&vcc_sys>; + }; + + vcc_sys: vcc-sys { + compatible = "regulator-fixed"; + regulator-name = "vcc_sys"; + regulator-always-on; + regulator-min-microvolt = <3800000>; + regulator-max-microvolt = <3800000>; + vin-supply = <&vcc_bat>; + }; + + vcc_wl: vcc-wl { + compatible = "regulator-fixed"; + enable-active-high; + gpio = <&gpio0 RK_PA0 GPIO_ACTIVE_HIGH>; + pinctrl-0 = <&vcc_wl_pin>; + pinctrl-names = "default"; + regulator-name = "vcc_wl"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + vin-supply = <&vcc_bat>; + }; + + vdda_0v9: vdda-0v9 { + compatible = "regulator-fixed"; + regulator-name = "vdda_0v9"; + regulator-always-on; + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <900000>; + /* powered by vcc_sys, enabled by vcc_1v8_en */ + vin-supply = <&vcc_1v8_en>; + }; +}; + +&cpu0 { + cpu-supply = <&vdd_cpu>; +}; + +&cpu1 { + cpu-supply = <&vdd_cpu>; +}; + +&cpu2 { + cpu-supply = <&vdd_cpu>; +}; + +&cpu3 { + cpu-supply = <&vdd_cpu>; +}; + +&i2c0 { + status = "okay"; + + vdd_cpu: regulator@1c { + compatible = "tcs,tcs4525"; + reg = <0x1c>; + fcs,suspend-voltage-selector = <0>; + regulator-name = "vdd_cpu"; + regulator-min-microvolt = <712500>; + regulator-max-microvolt = <1390000>; + regulator-ramp-delay = <2300>; + regulator-always-on; + vin-supply = <&vcc_sys>; + + regulator-state-mem { + regulator-on-in-suspend; + }; + }; + + rk817: pmic@20 { + compatible = "rockchip,rk817"; + reg = <0x20>; + interrupt-parent = <&gpio0>; + interrupts = <RK_PA3 IRQ_TYPE_LEVEL_LOW>; + assigned-clocks = <&cru I2S1_MCLKOUT_TX>; + assigned-clock-parents = <&cru CLK_I2S1_8CH_TX>; + clocks = <&cru I2S1_MCLKOUT_TX>; + clock-names = "mclk"; + #clock-cells = <1>; + pinctrl-0 = <&i2s1m0_mclk>, <&pmic_int_l>, <&pmic_sleep>; + pinctrl-names = "default"; + rockchip,system-power-controller; + #sound-dai-cells = <0>; + wakeup-source; + + vcc1-supply = <&vcc_sys>; + vcc2-supply = <&vcc_sys>; + vcc3-supply = <&vcc_sys>; + vcc4-supply = <&vcc_sys>; + vcc5-supply = <&vcc_sys>; + vcc6-supply = <&vcc_sys>; + vcc7-supply = <&vcc_sys>; + vcc8-supply = <&vcc_sys>; + vcc9-supply = <&dcdc_boost>; + + regulators { + vdd_logic: DCDC_REG1 { + regulator-name = "vdd_logic"; + regulator-always-on; + regulator-min-microvolt = <500000>; + regulator-max-microvolt = <1350000>; + regulator-init-microvolt = <900000>; + regulator-ramp-delay = <6001>; + regulator-initial-mode = <0x2>; + + regulator-state-mem { + regulator-off-in-suspend; + regulator-suspend-microvolt = <900000>; + }; + }; + + vdd_gpu_npu: DCDC_REG2 { + regulator-name = "vdd_gpu_npu"; + regulator-min-microvolt = <500000>; + regulator-max-microvolt = <1350000>; + regulator-init-microvolt = <900000>; + regulator-ramp-delay = <6001>; + regulator-initial-mode = <0x2>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcc_ddr: DCDC_REG3 { + regulator-name = "vcc_ddr"; + regulator-always-on; + regulator-initial-mode = <0x2>; + + regulator-state-mem { + regulator-on-in-suspend; + }; + }; + + vcc_3v3: DCDC_REG4 { + regulator-name = "vcc_3v3"; + regulator-always-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-initial-mode = <0x2>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcca_1v8_pmu: LDO_REG1 { + regulator-name = "vcca_1v8_pmu"; + regulator-always-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + + regulator-state-mem { + regulator-on-in-suspend; + }; + }; + + /* unused */ + vdda_0v9_ldo: LDO_REG2 { + regulator-name = "vdda_0v9_ldo"; + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <900000>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vdda_0v9_pmu: LDO_REG3 { + regulator-name = "vdda_0v9_pmu"; + regulator-always-on; + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <900000>; + + regulator-state-mem { + regulator-on-in-suspend; + }; + }; + + vccio_acodec: LDO_REG4 { + regulator-name = "vccio_acodec"; + regulator-always-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + /* unused */ + vccio_sd: LDO_REG5 { + regulator-name = "vccio_sd"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcc_3v3_pmu: LDO_REG6 { + regulator-name = "vcc_3v3_pmu"; + regulator-always-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + + regulator-state-mem { + regulator-on-in-suspend; + }; + }; + + vcc_1v8_en: LDO_REG7 { + regulator-name = "vcc_1v8_en"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vbat_4g_en: LDO_REG8 { + regulator-name = "vbat_4g_en"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + sleep_sta_ctl: LDO_REG9 { + regulator-name = "sleep_sta_ctl"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + + regulator-state-mem { + regulator-on-in-suspend; + }; + }; + + dcdc_boost: BOOST { + regulator-name = "boost"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + otg_switch: OTG_SWITCH { + regulator-name = "otg_switch"; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + }; + }; +}; + +&i2c1 { + status = "okay"; + + digitizer@9 { + compatible = "wacom,w9013", "hid-over-i2c"; + reg = <0x09>; + interrupt-parent = <&gpio0>; + interrupts = <RK_PB6 IRQ_TYPE_LEVEL_LOW>; + hid-descr-addr = <0x1>; + pinctrl-0 = <&pen_fwe>, <&pen_irq_l>, <&pen_rst_l>; + pinctrl-names = "default"; + vdd-supply = <&vcc_3v3_pmu>; + }; +}; + +&i2c3 { + pinctrl-0 = <&i2c3m1_xfer>; + status = "okay"; + + led-controller@36 { + compatible = "ti,lm3630a"; + reg = <0x36>; + enable-gpios = <&gpio0 RK_PB7 GPIO_ACTIVE_HIGH>; + pinctrl-0 = <&backlight_hwen_h>; + pinctrl-names = "default"; + #address-cells = <1>; + #size-cells = <0>; + + led@0 { + reg = <0>; + label = "backlight_cool"; + default-brightness = <0>; + }; + + led@1 { + reg = <1>; + label = "backlight_warm"; + default-brightness = <0>; + }; + }; +}; + +&i2s1_8ch { + pinctrl-0 = <&i2s1m0_lrcktx>, <&i2s1m0_sclktx>, <&i2s1m0_sdi0>, <&i2s1m0_sdo0>; + rockchip,trcm-sync-tx-only; + status = "okay"; +}; + +&pdm { + pinctrl-0 = <&pdmm0_clk1>, <&pdmm0_sdi1>, <&pdmm0_sdi2>; + /* microphones are on channels 1 and 2 */ + rockchip,path-map = <1>, <2>, <0>, <3>; + status = "okay"; +}; + +&pinctrl { + audio-amplifier { + spk_amp_enable_h: spk-amp-enable-h { + rockchip,pins = <3 RK_PC4 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + + backlight { + backlight_hwen_h: backlight-hwen-h { + rockchip,pins = <0 RK_PB7 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + + bt { + bt_enable_h: bt-enable-h { + rockchip,pins = <0 RK_PC4 RK_FUNC_GPIO &pcfg_pull_none>; + }; + + bt_host_wake_l: bt-host-wake-l { + rockchip,pins = <0 RK_PC3 RK_FUNC_GPIO &pcfg_pull_up>; + }; + + bt_wake_h: bt-wake-h { + rockchip,pins = <0 RK_PC2 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + + led { + led_pin: led-pin { + rockchip,pins = <3 RK_PC5 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + + hall { + hall_int_l: hall-int-l { + rockchip,pins = <0 RK_PC7 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + + pen { + pen_fwe: pen-fwe { + rockchip,pins = <3 RK_PB7 RK_FUNC_GPIO &pcfg_pull_down>; + }; + + pen_irq_l: pen-irq-l { + rockchip,pins = <0 RK_PB6 RK_FUNC_GPIO &pcfg_pull_none>; + }; + + pen_rst_l: pen-rst-l { + rockchip,pins = <0 RK_PC1 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + + pmic { + pmic_int_l: pmic-int-l { + rockchip,pins = <0 RK_PA3 RK_FUNC_GPIO &pcfg_pull_none>; + }; + + pmic_sleep: pmic-sleep { + rockchip,pins = <0 RK_PA2 1 &pcfg_pull_none>; + }; + }; + + sdio-pwrseq { + wifi_enable_h: wifi-enable-h { + rockchip,pins = <0 RK_PC6 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + + vcc-wl { + vcc_wl_pin: vcc-wl-pin { + rockchip,pins = <0 RK_PA0 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + + wifi { + wifi_host_wake_l: wifi-host-wake-l { + rockchip,pins = <0 RK_PC5 RK_FUNC_GPIO &pcfg_pull_up>; + }; + }; +}; + +&pmu_io_domains { + pmuio1-supply = <&vcc_3v3_pmu>; + pmuio2-supply = <&vcc_3v3_pmu>; + vccio1-supply = <&vccio_acodec>; + vccio2-supply = <&vcc_1v8>; + vccio3-supply = <&vcc_3v3>; + vccio4-supply = <&vcca_1v8_pmu>; + vccio5-supply = <&vcc_3v3>; + vccio6-supply = <&vcc_3v3>; + status = "okay"; +}; + +&saradc { + vref-supply = <&vcc_1v8>; + status = "okay"; +}; + +&sdhci { + bus-width = <8>; + mmc-hs200-1_8v; + non-removable; + pinctrl-0 = <&emmc_bus8>, <&emmc_clk>, <&emmc_cmd>, <&emmc_datastrobe>, <&emmc_rstnout>; + pinctrl-names = "default"; + vmmc-supply = <&vcc_3v3>; + vqmmc-supply = <&vcc_1v8>; + status = "okay"; +}; + +&sdmmc1 { + bus-width = <4>; + cap-sd-highspeed; + cap-sdio-irq; + keep-power-in-suspend; + mmc-pwrseq = <&sdio_pwrseq>; + non-removable; + pinctrl-0 = <&sdmmc1_bus4>, <&sdmmc1_clk>, <&sdmmc1_cmd>; + pinctrl-names = "default"; + sd-uhs-sdr104; + vmmc-supply = <&vcc_wl>; + vqmmc-supply = <&vcca_1v8_pmu>; + status = "okay"; +}; + +&tsadc { + /* tshut mode 0:CRU 1:GPIO */ + rockchip,hw-tshut-mode = <1>; + /* tshut polarity 0:LOW 1:HIGH */ + rockchip,hw-tshut-polarity = <0>; + status = "okay"; +}; + +&uart1 { + pinctrl-0 = <&uart1m0_ctsn>, <&uart1m0_rtsn>, <&uart1m0_xfer>; + pinctrl-names = "default"; + uart-has-rtscts; + status = "okay"; + + bluetooth { + compatible = "brcm,bcm43438-bt"; + clocks = <&rk817 1>; + clock-names = "lpo"; + device-wake-gpios = <&gpio0 RK_PC2 GPIO_ACTIVE_HIGH>; + host-wake-gpios = <&gpio0 RK_PC3 GPIO_ACTIVE_HIGH>; + reset-gpios = <&gpio0 RK_PC4 GPIO_ACTIVE_LOW>; + pinctrl-0 = <&bt_enable_h>, <&bt_host_wake_l>, <&bt_wake_h>; + pinctrl-names = "default"; + vbat-supply = <&vcc_wl>; + vddio-supply = <&vcca_1v8_pmu>; + }; +}; + +&uart2 { + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/rockchip/rk3566-quartz64-a.dts b/arch/arm64/boot/dts/rockchip/rk3566-quartz64-a.dts index d9eb92d59099..dd7f4b9b686b 100644 --- a/arch/arm64/boot/dts/rockchip/rk3566-quartz64-a.dts +++ b/arch/arm64/boot/dts/rockchip/rk3566-quartz64-a.dts @@ -73,6 +73,17 @@ }; }; + sdio_pwrseq: sdio-pwrseq { + compatible = "mmc-pwrseq-simple"; + clocks = <&rk817 1>; + clock-names = "ext_clock"; + pinctrl-names = "default"; + pinctrl-0 = <&wifi_enable_h>; + post-power-on-delay-ms = <100>; + power-off-delay-us = <5000000>; + reset-gpios = <&gpio2 RK_PC2 GPIO_ACTIVE_LOW>; + }; + spdif_dit: spdif-dit { compatible = "linux,spdif-dit"; #sound-dai-cells = <0>; @@ -124,6 +135,22 @@ vin-supply = <&vcc12v_dcin>; }; + /* all four ports are controlled by one gpio + * the host ports are sourced from vcc5v0_usb + * the otg port is sourced from vcc5v0_midu + */ + vcc5v0_usb20_host: vcc5v0_usb20_host { + compatible = "regulator-fixed"; + enable-active-high; + gpio = <&gpio4 RK_PB5 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&vcc5v0_usb20_host_en>; + regulator-name = "vcc5v0_usb20_host"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + vin-supply = <&vcc5v0_usb>; + }; + vcc3v3_sd: vcc3v3_sd { compatible = "regulator-fixed"; enable-active-low; @@ -147,6 +174,17 @@ regulator-max-microvolt = <4400000>; vin-supply = <&vbus>; }; + + /* sourced from vcc_sys, sdio module operates internally at 3.3v */ + vcc_wl: vcc_wl { + compatible = "regulator-fixed"; + regulator-name = "vcc_wl"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + vin-supply = <&vcc_sys>; + }; }; &cpu0 { @@ -205,6 +243,11 @@ status = "okay"; }; +&gpu { + mali-supply = <&vdd_gpu>; + status = "okay"; +}; + &i2c0 { status = "okay"; @@ -427,6 +470,14 @@ }; }; +/* i2c3 is exposed on con40 + * pin 3 - i2c3_sda_m0, pullup to vcc_3v3 + * pin 5 - i2c3_scl_m0, pullup to vcc_3v3 + */ +&i2c3 { + status = "okay"; +}; + &i2s1_8ch { pinctrl-names = "default"; pinctrl-0 = <&i2s1m0_sclktx @@ -475,6 +526,18 @@ }; }; + usb2 { + vcc5v0_usb20_host_en: vcc5v0-usb20-host-en { + rockchip,pins = <4 RK_PB5 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + + sdio-pwrseq { + wifi_enable_h: wifi-enable-h { + rockchip,pins = <2 RK_PC2 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + vcc_sd { vcc_sd_h: vcc-sd-h { rockchip,pins = <0 RK_PA5 RK_FUNC_GPIO &pcfg_pull_none>; @@ -482,6 +545,19 @@ }; }; +&pmu_io_domains { + pmuio1-supply = <&vcc3v3_pmu>; + pmuio2-supply = <&vcc3v3_pmu>; + vccio1-supply = <&vccio_acodec>; + vccio2-supply = <&vcc_1v8>; + vccio3-supply = <&vccio_sd>; + vccio4-supply = <&vcc_1v8>; + vccio5-supply = <&vcc_3v3>; + vccio6-supply = <&vcc1v8_dvp>; + vccio7-supply = <&vcc_3v3>; + status = "okay"; +}; + &sdhci { bus-width = <8>; mmc-hs200-1_8v; @@ -503,10 +579,32 @@ status = "okay"; }; +&sdmmc1 { + bus-width = <4>; + cap-sd-highspeed; + cap-sdio-irq; + keep-power-in-suspend; + mmc-pwrseq = <&sdio_pwrseq>; + non-removable; + pinctrl-names = "default"; + pinctrl-0 = <&sdmmc1_bus4 &sdmmc1_cmd &sdmmc1_clk>; + sd-uhs-sdr104; + vmmc-supply = <&vcc_wl>; + vqmmc-supply = <&vcc_1v8>; + status = "okay"; +}; + +/* spdif is exposed on con40 pin 18 */ &spdif { status = "okay"; }; +/* spi1 is exposed on con40 + * pin 11 - spi1_mosi_m1 + * pin 13 - spi1_miso_m1 + * pin 15 - spi1_clk_m1 + * pin 17 - spi1_cs0_m1 + */ &spi1 { pinctrl-names = "default"; pinctrl-0 = <&spi1m1_cs0 &spi1m1_pins>; @@ -520,6 +618,10 @@ status = "okay"; }; +/* uart0 is exposed on con40 + * pin 12 - uart0_tx + * pin 14 - uart0_rx + */ &uart0 { pinctrl-names = "default"; pinctrl-0 = <&uart0_xfer>; @@ -546,6 +648,40 @@ }; }; +/* uart2 is exposed on con40 + * pin 8 - uart2_tx_m0_debug + * pin 10 - uart2_rx_m0_debug + */ &uart2 { status = "okay"; }; + +&usb_host0_ehci { + status = "okay"; +}; + +&usb_host0_ohci { + status = "okay"; +}; + +&usb_host1_ehci { + status = "okay"; +}; + +&usb_host1_ohci { + status = "okay"; +}; + +&usb2phy1 { + status = "okay"; +}; + +&usb2phy1_host { + phy-supply = <&vcc5v0_usb20_host>; + status = "okay"; +}; + +&usb2phy1_otg { + phy-supply = <&vcc5v0_usb20_host>; + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/rockchip/rk3568-bpi-r2-pro.dts b/arch/arm64/boot/dts/rockchip/rk3568-bpi-r2-pro.dts new file mode 100644 index 000000000000..a01886b467ed --- /dev/null +++ b/arch/arm64/boot/dts/rockchip/rk3568-bpi-r2-pro.dts @@ -0,0 +1,457 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Author: Frank Wunderlich <frank-w@public-files.de> + * + */ + +/dts-v1/; +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/leds/common.h> +#include <dt-bindings/pinctrl/rockchip.h> +#include "rk3568.dtsi" + +/ { + model = "Bananapi-R2 Pro (RK3568) DDR4 Board"; + compatible = "rockchip,rk3568-bpi-r2pro", "rockchip,rk3568"; + + aliases { + ethernet0 = &gmac0; + mmc0 = &sdmmc0; + mmc1 = &sdhci; + }; + + chosen: chosen { + stdout-path = "serial2:1500000n8"; + }; + + leds { + compatible = "gpio-leds"; + pinctrl-names = "default"; + pinctrl-0 = <&blue_led_pin &green_led_pin>; + + blue_led: led-0 { + color = <LED_COLOR_ID_BLUE>; + default-state = "off"; + function = LED_FUNCTION_STATUS; + gpios = <&gpio0 RK_PD6 GPIO_ACTIVE_HIGH>; + }; + + green_led: led-1 { + color = <LED_COLOR_ID_GREEN>; + default-state = "on"; + function = LED_FUNCTION_POWER; + gpios = <&gpio0 RK_PD5 GPIO_ACTIVE_HIGH>; + }; + }; + + dc_12v: dc-12v { + compatible = "regulator-fixed"; + regulator-name = "dc_12v"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <12000000>; + regulator-max-microvolt = <12000000>; + }; + + vcc3v3_sys: vcc3v3-sys { + compatible = "regulator-fixed"; + regulator-name = "vcc3v3_sys"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + vin-supply = <&dc_12v>; + }; + + vcc5v0_sys: vcc5v0-sys { + compatible = "regulator-fixed"; + regulator-name = "vcc5v0_sys"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + vin-supply = <&dc_12v>; + }; +}; + +&gmac0 { + assigned-clocks = <&cru SCLK_GMAC0_RX_TX>, <&cru SCLK_GMAC0>; + assigned-clock-parents = <&cru SCLK_GMAC0_RGMII_SPEED>, <&cru CLK_MAC0_2TOP>; + clock_in_out = "input"; + phy-handle = <&rgmii_phy0>; + phy-mode = "rgmii"; + pinctrl-names = "default"; + pinctrl-0 = <&gmac0_miim + &gmac0_tx_bus2 + &gmac0_rx_bus2 + &gmac0_rgmii_clk + &gmac0_rgmii_bus>; + snps,reset-gpio = <&gpio3 RK_PB7 GPIO_ACTIVE_LOW>; + snps,reset-active-low; + /* Reset time is 20ms, 100ms for rtl8211f */ + snps,reset-delays-us = <0 20000 100000>; + tx_delay = <0x3c>; + rx_delay = <0x2f>; + status = "okay"; +}; + +&i2c0 { + status = "okay"; + + rk809: pmic@20 { + compatible = "rockchip,rk809"; + reg = <0x20>; + interrupt-parent = <&gpio0>; + interrupts = <RK_PA3 IRQ_TYPE_LEVEL_LOW>; + #clock-cells = <1>; + pinctrl-names = "default"; + pinctrl-0 = <&pmic_int>; + rockchip,system-power-controller; + vcc1-supply = <&vcc3v3_sys>; + vcc2-supply = <&vcc3v3_sys>; + vcc3-supply = <&vcc3v3_sys>; + vcc4-supply = <&vcc3v3_sys>; + vcc5-supply = <&vcc3v3_sys>; + vcc6-supply = <&vcc3v3_sys>; + vcc7-supply = <&vcc3v3_sys>; + vcc8-supply = <&vcc3v3_sys>; + vcc9-supply = <&vcc3v3_sys>; + wakeup-source; + + regulators { + vdd_logic: DCDC_REG1 { + regulator-name = "vdd_logic"; + regulator-always-on; + regulator-boot-on; + regulator-init-microvolt = <900000>; + regulator-initial-mode = <0x2>; + regulator-min-microvolt = <500000>; + regulator-max-microvolt = <1350000>; + regulator-ramp-delay = <6001>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vdd_gpu: DCDC_REG2 { + regulator-name = "vdd_gpu"; + regulator-init-microvolt = <900000>; + regulator-initial-mode = <0x2>; + regulator-min-microvolt = <500000>; + regulator-max-microvolt = <1350000>; + regulator-ramp-delay = <6001>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcc_ddr: DCDC_REG3 { + regulator-name = "vcc_ddr"; + regulator-always-on; + regulator-boot-on; + regulator-initial-mode = <0x2>; + + regulator-state-mem { + regulator-on-in-suspend; + }; + }; + + vdd_npu: DCDC_REG4 { + regulator-name = "vdd_npu"; + regulator-init-microvolt = <900000>; + regulator-initial-mode = <0x2>; + regulator-min-microvolt = <500000>; + regulator-max-microvolt = <1350000>; + regulator-ramp-delay = <6001>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcc_1v8: DCDC_REG5 { + regulator-name = "vcc_1v8"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vdda0v9_image: LDO_REG1 { + regulator-name = "vdda0v9_image"; + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <900000>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vdda_0v9: LDO_REG2 { + regulator-name = "vdda_0v9"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <900000>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vdda0v9_pmu: LDO_REG3 { + regulator-name = "vdda0v9_pmu"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <900000>; + + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <900000>; + }; + }; + + vccio_acodec: LDO_REG4 { + regulator-name = "vccio_acodec"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vccio_sd: LDO_REG5 { + regulator-name = "vccio_sd"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcc3v3_pmu: LDO_REG6 { + regulator-name = "vcc3v3_pmu"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <3300000>; + }; + }; + + vcca_1v8: LDO_REG7 { + regulator-name = "vcca_1v8"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcca1v8_pmu: LDO_REG8 { + regulator-name = "vcca1v8_pmu"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <1800000>; + }; + }; + + vcca1v8_image: LDO_REG9 { + regulator-name = "vcca1v8_image"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcc_3v3: SWITCH_REG1 { + regulator-name = "vcc_3v3"; + regulator-always-on; + regulator-boot-on; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcc3v3_sd: SWITCH_REG2 { + regulator-name = "vcc3v3_sd"; + regulator-always-on; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + }; + }; +}; + +&i2c5 { + /* pin 3 (SDA) + 4 (SCL) of header con2 */ + status = "disabled"; +}; + +&mdio0 { + rgmii_phy0: ethernet-phy@0 { + compatible = "ethernet-phy-ieee802.3-c22"; + reg = <0x0>; + }; +}; + +&pinctrl { + leds { + blue_led_pin: blue-led-pin { + rockchip,pins = <0 RK_PD6 RK_FUNC_GPIO &pcfg_pull_none>; + }; + green_led_pin: green-led-pin { + rockchip,pins = <0 RK_PD5 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + + pmic { + pmic_int: pmic_int { + rockchip,pins = + <0 RK_PA3 RK_FUNC_GPIO &pcfg_pull_up>; + }; + }; +}; + +&pmu_io_domains { + pmuio1-supply = <&vcc3v3_pmu>; + pmuio2-supply = <&vcc3v3_pmu>; + vccio1-supply = <&vccio_acodec>; + vccio3-supply = <&vccio_sd>; + vccio4-supply = <&vcc_1v8>; + vccio5-supply = <&vcc_3v3>; + vccio6-supply = <&vcc_3v3>; + vccio7-supply = <&vcc_3v3>; + status = "okay"; +}; + +&pwm8 { + /* fan 5v - gnd - pwm */ + status = "okay"; +}; + +&pwm10 { + /* pin 7 of header con2 */ + status = "disabled"; +}; + +&pwm11 { + /* pin 15 of header con2 */ + status = "disabled"; +}; + +&pwm12 { + /* pin 21 of header con2 */ + /* shared with uart9 + spi3 */ + pinctrl-0 = <&pwm12m1_pins>; + status = "disabled"; +}; + +&pwm13 { + /* pin 24 of header con2 */ + /* shared with uart9 */ + pinctrl-0 = <&pwm13m1_pins>; + status = "disabled"; +}; + +&pwm14 { + /* pin 23 of header con2 */ + /* shared with spi3 */ + pinctrl-0 = <&pwm14m1_pins>; + status = "disabled"; +}; + +&pwm15 { + /* pin 19 of header con2 */ + /* shared with spi3 */ + pinctrl-0 = <&pwm15m1_pins>; + status = "disabled"; +}; + +&saradc { + vref-supply = <&vcca_1v8>; + status = "okay"; +}; + +&sdhci { + bus-width = <8>; + max-frequency = <200000000>; + non-removable; + pinctrl-names = "default"; + pinctrl-0 = <&emmc_bus8 &emmc_clk &emmc_cmd &emmc_datastrobe>; + status = "okay"; +}; + +&sdmmc0 { + bus-width = <4>; + cap-sd-highspeed; + cd-gpios = <&gpio0 RK_PA4 GPIO_ACTIVE_LOW>; + disable-wp; + pinctrl-names = "default"; + pinctrl-0 = <&sdmmc0_bus4 &sdmmc0_clk &sdmmc0_cmd &sdmmc0_det>; + sd-uhs-sdr104; + vmmc-supply = <&vcc3v3_sd>; + vqmmc-supply = <&vccio_sd>; + status = "okay"; +}; + +&spi3 { + /* pin 19 (MO) + 21 (MI) + 23 (CK) of header con2 */ + /* shared with pwm12/14/15 and uart9 */ + pinctrl-0 = <&spi3m1_pins>; + status = "disabled"; +}; + +&tsadc { + status = "okay"; +}; + +&uart0 { + /* pin 8 (TX) + 10 (RX) (RTS:16, CTS:18) of header con2 */ + status = "disabled"; +}; + +&uart2 { + /* debug-uart */ + status = "okay"; +}; + +&uart7 { + /* pin 11 (TX) + 13 (RX) of header con2 */ + pinctrl-0 = <&uart7m1_xfer>; + status = "disabled"; +}; + +&uart9 { + /* pin 21 (TX) + 24 (RX) of header con2 */ + /* shared with pwm13 and pwm12/spi3 */ + pinctrl-0 = <&uart9m1_xfer>; + status = "disabled"; +}; diff --git a/arch/arm64/boot/dts/rockchip/rk3568-evb1-v10.dts b/arch/arm64/boot/dts/rockchip/rk3568-evb1-v10.dts index 184e2aa2416a..a794a0ea5c70 100644 --- a/arch/arm64/boot/dts/rockchip/rk3568-evb1-v10.dts +++ b/arch/arm64/boot/dts/rockchip/rk3568-evb1-v10.dts @@ -6,6 +6,7 @@ /dts-v1/; #include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/leds/common.h> #include <dt-bindings/pinctrl/rockchip.h> #include "rk3568.dtsi" @@ -33,6 +34,33 @@ regulator-max-microvolt = <12000000>; }; + leds { + compatible = "gpio-leds"; + + led_work: led-0 { + gpios = <&gpio0 RK_PC0 GPIO_ACTIVE_HIGH>; + function = LED_FUNCTION_HEARTBEAT; + color = <LED_COLOR_ID_BLUE>; + linux,default-trigger = "heartbeat"; + pinctrl-names = "default"; + pinctrl-0 = <&led_work_en>; + }; + }; + + rk809-sound { + compatible = "simple-audio-card"; + simple-audio-card,format = "i2s"; + simple-audio-card,name = "Analog RK809"; + simple-audio-card,mclk-fs = <256>; + + simple-audio-card,cpu { + sound-dai = <&i2s1_8ch>; + }; + simple-audio-card,codec { + sound-dai = <&rk809>; + }; + }; + vcc3v3_sys: vcc3v3-sys { compatible = "regulator-fixed"; regulator-name = "vcc3v3_sys"; @@ -53,10 +81,38 @@ vin-supply = <&dc_12v>; }; + vcc5v0_usb: vcc5v0-usb { + compatible = "regulator-fixed"; + regulator-name = "vcc5v0_usb"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + vin-supply = <&dc_12v>; + }; + + vcc5v0_usb_host: vcc5v0-usb-host { + compatible = "regulator-fixed"; + enable-active-high; + gpio = <&gpio0 RK_PA6 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&vcc5v0_usb_host_en>; + regulator-name = "vcc5v0_usb_host"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + vin-supply = <&vcc5v0_usb>; + }; + vcc3v3_lcd0_n: vcc3v3-lcd0-n { compatible = "regulator-fixed"; regulator-name = "vcc3v3_lcd0_n"; - regulator-boot-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + enable-active-high; + gpio = <&gpio0 RK_PC7 GPIO_ACTIVE_HIGH>; + vin-supply = <&vcc3v3_sys>; + pinctrl-names = "default"; + pinctrl-0 = <&vcc3v3_lcd0_n_en>; regulator-state-mem { regulator-off-in-suspend; @@ -66,7 +122,13 @@ vcc3v3_lcd1_n: vcc3v3-lcd1-n { compatible = "regulator-fixed"; regulator-name = "vcc3v3_lcd1_n"; - regulator-boot-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + enable-active-high; + gpio = <&gpio0 RK_PC5 GPIO_ACTIVE_HIGH>; + vin-supply = <&vcc3v3_sys>; + pinctrl-names = "default"; + pinctrl-0 = <&vcc3v3_lcd1_n_en>; regulator-state-mem { regulator-off-in-suspend; @@ -74,6 +136,22 @@ }; }; +&cpu0 { + cpu-supply = <&vdd_cpu>; +}; + +&cpu1 { + cpu-supply = <&vdd_cpu>; +}; + +&cpu2 { + cpu-supply = <&vdd_cpu>; +}; + +&cpu3 { + cpu-supply = <&vdd_cpu>; +}; + &gmac0 { assigned-clocks = <&cru SCLK_GMAC0_RX_TX>, <&cru SCLK_GMAC0>; assigned-clock-parents = <&cru SCLK_GMAC0_RGMII_SPEED>; @@ -106,18 +184,45 @@ status = "okay"; }; +&gpu { + mali-supply = <&vdd_gpu>; + status = "okay"; +}; + &i2c0 { status = "okay"; + vdd_cpu: regulator@1c { + compatible = "tcs,tcs4525"; + reg = <0x1c>; + fcs,suspend-voltage-selector = <1>; + regulator-name = "vdd_cpu"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <1150000>; + regulator-ramp-delay = <2300>; + vin-supply = <&vcc5v0_sys>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + rk809: pmic@20 { compatible = "rockchip,rk809"; reg = <0x20>; interrupt-parent = <&gpio0>; interrupts = <RK_PA3 IRQ_TYPE_LEVEL_LOW>; + assigned-clocks = <&cru I2S1_MCLKOUT_TX>; + assigned-clock-parents = <&cru CLK_I2S1_8CH_TX>; #clock-cells = <1>; + clock-names = "mclk"; + clocks = <&cru I2S1_MCLKOUT_TX>; pinctrl-names = "default"; - pinctrl-0 = <&pmic_int>; + pinctrl-0 = <&pmic_int>, <&i2s1m0_mclk>; rockchip,system-power-controller; + #sound-dai-cells = <0>; vcc1-supply = <&vcc3v3_sys>; vcc2-supply = <&vcc3v3_sys>; vcc3-supply = <&vcc3v3_sys>; @@ -147,6 +252,7 @@ vdd_gpu: DCDC_REG2 { regulator-name = "vdd_gpu"; + regulator-always-on; regulator-init-microvolt = <900000>; regulator-initial-mode = <0x2>; regulator-min-microvolt = <500000>; @@ -231,6 +337,7 @@ vccio_acodec: LDO_REG4 { regulator-name = "vccio_acodec"; + regulator-always-on; regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; @@ -315,9 +422,35 @@ }; }; }; + + codec { + mic-in-differential; + }; }; }; +&i2c1 { + status = "okay"; + + touchscreen0: goodix@14 { + compatible = "goodix,gt1151"; + reg = <0x14>; + interrupt-parent = <&gpio0>; + interrupts = <RK_PB5 IRQ_TYPE_EDGE_FALLING>; + AVDD28-supply = <&vcc3v3_lcd0_n>; + irq-gpios = <&gpio0 RK_PB5 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&touch_int &touch_rst>; + reset-gpios = <&gpio0 RK_PB6 GPIO_ACTIVE_HIGH>; + VDDIO-supply = <&vcc3v3_lcd0_n>; + }; +}; + +&i2s1_8ch { + rockchip,trcm-sync-tx-only; + status = "okay"; +}; + &mdio0 { rgmii_phy0: ethernet-phy@0 { compatible = "ethernet-phy-ieee802.3-c22"; @@ -339,12 +472,42 @@ }; &pinctrl { + display { + vcc3v3_lcd0_n_en: vcc3v3_lcd0_n_en { + rockchip,pins = <0 RK_PC7 0 &pcfg_pull_none>; + }; + vcc3v3_lcd1_n_en: vcc3v3_lcd1_n_en { + rockchip,pins = <0 RK_PC5 0 &pcfg_pull_none>; + }; + }; + + leds { + led_work_en: led_work_en { + rockchip,pins = <0 RK_PC0 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + pmic { pmic_int: pmic_int { rockchip,pins = <0 RK_PA3 RK_FUNC_GPIO &pcfg_pull_up>; }; }; + + touchscreen { + touch_int: touch_int { + rockchip,pins = <0 RK_PB5 RK_FUNC_GPIO &pcfg_pull_up>; + }; + touch_rst: touch_rst { + rockchip,pins = <0 RK_PB6 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + + usb { + vcc5v0_usb_host_en: vcc5v0_usb_host_en { + rockchip,pins = <0 RK_PA6 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; }; &pmu_io_domains { @@ -387,6 +550,42 @@ status = "okay"; }; +&tsadc { + rockchip,hw-tshut-mode = <1>; + rockchip,hw-tshut-polarity = <0>; + status = "okay"; +}; + &uart2 { status = "okay"; }; + +&usb_host0_ehci { + status = "okay"; +}; + +&usb_host0_ohci { + status = "okay"; +}; + +&usb_host1_ehci { + status = "okay"; +}; + +&usb_host1_ohci { + status = "okay"; +}; + +&usb2phy1 { + status = "okay"; +}; + +&usb2phy1_host { + phy-supply = <&vcc5v0_usb_host>; + status = "okay"; +}; + +&usb2phy1_otg { + phy-supply = <&vcc5v0_usb_host>; + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/rockchip/rk3568.dtsi b/arch/arm64/boot/dts/rockchip/rk3568.dtsi index d91df1cde736..5b0f528d6818 100644 --- a/arch/arm64/boot/dts/rockchip/rk3568.dtsi +++ b/arch/arm64/boot/dts/rockchip/rk3568.dtsi @@ -8,6 +8,11 @@ / { compatible = "rockchip,rk3568"; + pipe_phy_grf0: syscon@fdc70000 { + compatible = "rockchip,rk3568-pipe-phy-grf", "syscon"; + reg = <0x0 0xfdc70000 0x0 0x1000>; + }; + qos_pcie3x1: qos@fe190080 { compatible = "rockchip,rk3568-qos", "syscon"; reg = <0x0 0xfe190080 0x0 0x20>; @@ -69,6 +74,22 @@ queue0 {}; }; }; + + combphy0: phy@fe820000 { + compatible = "rockchip,rk3568-naneng-combphy"; + reg = <0x0 0xfe820000 0x0 0x100>; + clocks = <&pmucru CLK_PCIEPHY0_REF>, + <&cru PCLK_PIPEPHY0>, + <&cru PCLK_PIPE>; + clock-names = "ref", "apb", "pipe"; + assigned-clocks = <&pmucru CLK_PCIEPHY0_REF>; + assigned-clock-rates = <100000000>; + resets = <&cru SRST_PIPEPHY0>; + rockchip,pipe-grf = <&pipegrf>; + rockchip,pipe-phy-grf = <&pipe_phy_grf0>; + #phy-cells = <1>; + status = "disabled"; + }; }; &cpu0_opp_table { diff --git a/arch/arm64/boot/dts/rockchip/rk356x.dtsi b/arch/arm64/boot/dts/rockchip/rk356x.dtsi index 8ccce54ee8e7..7cdef800cb3c 100644 --- a/arch/arm64/boot/dts/rockchip/rk356x.dtsi +++ b/arch/arm64/boot/dts/rockchip/rk356x.dtsi @@ -144,6 +144,40 @@ }; }; + gpu_opp_table: opp-table-1 { + compatible = "operating-points-v2"; + + opp-200000000 { + opp-hz = /bits/ 64 <200000000>; + opp-microvolt = <825000>; + }; + + opp-300000000 { + opp-hz = /bits/ 64 <300000000>; + opp-microvolt = <825000>; + }; + + opp-400000000 { + opp-hz = /bits/ 64 <400000000>; + opp-microvolt = <825000>; + }; + + opp-600000000 { + opp-hz = /bits/ 64 <600000000>; + opp-microvolt = <825000>; + }; + + opp-700000000 { + opp-hz = /bits/ 64 <700000000>; + opp-microvolt = <900000>; + }; + + opp-800000000 { + opp-hz = /bits/ 64 <800000000>; + opp-microvolt = <1000000>; + }; + }; + pmu { compatible = "arm,cortex-a55-pmu"; interrupts = <GIC_SPI 228 IRQ_TYPE_LEVEL_HIGH>, @@ -208,6 +242,50 @@ msi-controller; }; + usb_host0_ehci: usb@fd800000 { + compatible = "generic-ehci"; + reg = <0x0 0xfd800000 0x0 0x40000>; + interrupts = <GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cru HCLK_USB2HOST0>, <&cru HCLK_USB2HOST0_ARB>, + <&cru PCLK_USB>; + phys = <&usb2phy1_otg>; + phy-names = "usb"; + status = "disabled"; + }; + + usb_host0_ohci: usb@fd840000 { + compatible = "generic-ohci"; + reg = <0x0 0xfd840000 0x0 0x40000>; + interrupts = <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cru HCLK_USB2HOST0>, <&cru HCLK_USB2HOST0_ARB>, + <&cru PCLK_USB>; + phys = <&usb2phy1_otg>; + phy-names = "usb"; + status = "disabled"; + }; + + usb_host1_ehci: usb@fd880000 { + compatible = "generic-ehci"; + reg = <0x0 0xfd880000 0x0 0x40000>; + interrupts = <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cru HCLK_USB2HOST1>, <&cru HCLK_USB2HOST1_ARB>, + <&cru PCLK_USB>; + phys = <&usb2phy1_host>; + phy-names = "usb"; + status = "disabled"; + }; + + usb_host1_ohci: usb@fd8c0000 { + compatible = "generic-ohci"; + reg = <0x0 0xfd8c0000 0x0 0x40000>; + interrupts = <GIC_SPI 134 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cru HCLK_USB2HOST1>, <&cru HCLK_USB2HOST1_ARB>, + <&cru PCLK_USB>; + phys = <&usb2phy1_host>; + phy-names = "usb"; + status = "disabled"; + }; + pmugrf: syscon@fdc20000 { compatible = "rockchip,rk3568-pmugrf", "syscon", "simple-mfd"; reg = <0x0 0xfdc20000 0x0 0x10000>; @@ -218,11 +296,36 @@ }; }; + pipegrf: syscon@fdc50000 { + compatible = "rockchip,rk3568-pipe-grf", "syscon"; + reg = <0x0 0xfdc50000 0x0 0x1000>; + }; + grf: syscon@fdc60000 { compatible = "rockchip,rk3568-grf", "syscon", "simple-mfd"; reg = <0x0 0xfdc60000 0x0 0x10000>; }; + pipe_phy_grf1: syscon@fdc80000 { + compatible = "rockchip,rk3568-pipe-phy-grf", "syscon"; + reg = <0x0 0xfdc80000 0x0 0x1000>; + }; + + pipe_phy_grf2: syscon@fdc90000 { + compatible = "rockchip,rk3568-pipe-phy-grf", "syscon"; + reg = <0x0 0xfdc90000 0x0 0x1000>; + }; + + usb2phy0_grf: syscon@fdca0000 { + compatible = "rockchip,rk3568-usb2phy-grf", "syscon"; + reg = <0x0 0xfdca0000 0x0 0x8000>; + }; + + usb2phy1_grf: syscon@fdca8000 { + compatible = "rockchip,rk3568-usb2phy-grf", "syscon"; + reg = <0x0 0xfdca8000 0x0 0x8000>; + }; + pmucru: clock-controller@fdd00000 { compatible = "rockchip,rk3568-pmucru"; reg = <0x0 0xfdd00000 0x0 0x1000>; @@ -390,6 +493,21 @@ }; }; + gpu: gpu@fde60000 { + compatible = "rockchip,rk3568-mali", "arm,mali-bifrost"; + reg = <0x0 0xfde60000 0x0 0x4000>; + interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "job", "mmu", "gpu"; + clocks = <&scmi_clk 1>, <&cru CLK_GPU>; + clock-names = "gpu", "bus"; + #cooling-cells = <2>; + operating-points-v2 = <&gpu_opp_table>; + power-domains = <&power RK3568_PD_GPU>; + status = "disabled"; + }; + sdmmc2: mmc@fe000000 { compatible = "rockchip,rk3568-dw-mshc", "rockchip,rk3288-dw-mshc"; reg = <0x0 0xfe000000 0x0 0x4000>; @@ -651,6 +769,43 @@ status = "disabled"; }; + i2s3_2ch: i2s@fe430000 { + compatible = "rockchip,rk3568-i2s-tdm"; + reg = <0x0 0xfe430000 0x0 0x1000>; + interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cru MCLK_I2S3_2CH_TX>, <&cru MCLK_I2S3_2CH_RX>, + <&cru HCLK_I2S3_2CH>; + clock-names = "mclk_tx", "mclk_rx", "hclk"; + dmas = <&dmac1 6>, <&dmac1 7>; + dma-names = "tx", "rx"; + resets = <&cru SRST_M_I2S3_2CH_TX>, <&cru SRST_M_I2S3_2CH_RX>; + reset-names = "tx-m", "rx-m"; + rockchip,grf = <&grf>; + #sound-dai-cells = <0>; + status = "disabled"; + }; + + pdm: pdm@fe440000 { + compatible = "rockchip,rk3568-pdm"; + reg = <0x0 0xfe440000 0x0 0x1000>; + interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cru MCLK_PDM>, <&cru HCLK_PDM>; + clock-names = "pdm_clk", "pdm_hclk"; + dmas = <&dmac1 9>; + dma-names = "rx"; + pinctrl-0 = <&pdmm0_clk + &pdmm0_clk1 + &pdmm0_sdi0 + &pdmm0_sdi1 + &pdmm0_sdi2 + &pdmm0_sdi3>; + pinctrl-names = "default"; + resets = <&cru SRST_M_PDM>; + reset-names = "pdm-m"; + #sound-dai-cells = <0>; + status = "disabled"; + }; + dmac0: dma-controller@fe530000 { compatible = "arm,pl330", "arm,primecell"; reg = <0x0 0xfe530000 0x0 0x4000>; @@ -974,6 +1129,32 @@ polling-delay = <1000>; /* milliseconds */ thermal-sensors = <&tsadc 1>; + + trips { + gpu_threshold: gpu-threshold { + temperature = <70000>; + hysteresis = <2000>; + type = "passive"; + }; + gpu_target: gpu-target { + temperature = <75000>; + hysteresis = <2000>; + type = "passive"; + }; + gpu_crit: gpu-crit { + temperature = <95000>; + hysteresis = <2000>; + type = "critical"; + }; + }; + + cooling-maps { + map0 { + trip = <&gpu_target>; + cooling-device = + <&gpu THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; }; }; @@ -1141,6 +1322,82 @@ status = "disabled"; }; + combphy1: phy@fe830000 { + compatible = "rockchip,rk3568-naneng-combphy"; + reg = <0x0 0xfe830000 0x0 0x100>; + clocks = <&pmucru CLK_PCIEPHY1_REF>, + <&cru PCLK_PIPEPHY1>, + <&cru PCLK_PIPE>; + clock-names = "ref", "apb", "pipe"; + assigned-clocks = <&pmucru CLK_PCIEPHY1_REF>; + assigned-clock-rates = <100000000>; + resets = <&cru SRST_PIPEPHY1>; + rockchip,pipe-grf = <&pipegrf>; + rockchip,pipe-phy-grf = <&pipe_phy_grf1>; + #phy-cells = <1>; + status = "disabled"; + }; + + combphy2: phy@fe840000 { + compatible = "rockchip,rk3568-naneng-combphy"; + reg = <0x0 0xfe840000 0x0 0x100>; + clocks = <&pmucru CLK_PCIEPHY2_REF>, + <&cru PCLK_PIPEPHY2>, + <&cru PCLK_PIPE>; + clock-names = "ref", "apb", "pipe"; + assigned-clocks = <&pmucru CLK_PCIEPHY2_REF>; + assigned-clock-rates = <100000000>; + resets = <&cru SRST_PIPEPHY2>; + rockchip,pipe-grf = <&pipegrf>; + rockchip,pipe-phy-grf = <&pipe_phy_grf2>; + #phy-cells = <1>; + status = "disabled"; + }; + + usb2phy0: usb2phy@fe8a0000 { + compatible = "rockchip,rk3568-usb2phy"; + reg = <0x0 0xfe8a0000 0x0 0x10000>; + clocks = <&pmucru CLK_USBPHY0_REF>; + clock-names = "phyclk"; + clock-output-names = "clk_usbphy0_480m"; + interrupts = <GIC_SPI 135 IRQ_TYPE_LEVEL_HIGH>; + rockchip,usbgrf = <&usb2phy0_grf>; + #clock-cells = <0>; + status = "disabled"; + + usb2phy0_host: host-port { + #phy-cells = <0>; + status = "disabled"; + }; + + usb2phy0_otg: otg-port { + #phy-cells = <0>; + status = "disabled"; + }; + }; + + usb2phy1: usb2phy@fe8b0000 { + compatible = "rockchip,rk3568-usb2phy"; + reg = <0x0 0xfe8b0000 0x0 0x10000>; + clocks = <&pmucru CLK_USBPHY1_REF>; + clock-names = "phyclk"; + clock-output-names = "clk_usbphy1_480m"; + interrupts = <GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>; + rockchip,usbgrf = <&usb2phy1_grf>; + #clock-cells = <0>; + status = "disabled"; + + usb2phy1_host: host-port { + #phy-cells = <0>; + status = "disabled"; + }; + + usb2phy1_otg: otg-port { + #phy-cells = <0>; + status = "disabled"; + }; + }; + pinctrl: pinctrl { compatible = "rockchip,rk3568-pinctrl"; rockchip,grf = <&grf>; diff --git a/arch/arm64/boot/dts/tesla/Makefile b/arch/arm64/boot/dts/tesla/Makefile new file mode 100644 index 000000000000..a1ee50e2fd06 --- /dev/null +++ b/arch/arm64/boot/dts/tesla/Makefile @@ -0,0 +1,3 @@ +# SPDX-License-Identifier: GPL-2.0 +dtb-$(CONFIG_ARCH_TESLA_FSD) += \ + fsd-evb.dtb diff --git a/arch/arm64/boot/dts/tesla/fsd-evb.dts b/arch/arm64/boot/dts/tesla/fsd-evb.dts new file mode 100644 index 000000000000..5af560c1b5e6 --- /dev/null +++ b/arch/arm64/boot/dts/tesla/fsd-evb.dts @@ -0,0 +1,39 @@ +// SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +/* + * Tesla FSD board device tree source + * + * Copyright (c) 2017-2021 Samsung Electronics Co., Ltd. + * https://www.samsung.com + * Copyright (c) 2017-2021 Tesla, Inc. + * https://www.tesla.com + */ + +/dts-v1/; +#include "fsd.dtsi" + +/ { + model = "Tesla Full Self-Driving (FSD) Evaluation board"; + compatible = "tesla,fsd-evb", "tesla,fsd"; + + aliases { + serial0 = &serial_0; + serial1 = &serial_1; + }; + + chosen { + stdout-path = &serial_0; + }; + + memory@80000000 { + device_type = "memory"; + reg = <0x0 0x80000000 0x2 0x00000000>; + }; +}; + +&fin_pll { + clock-frequency = <24000000>; +}; + +&serial_0 { + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/tesla/fsd-pinctrl.dtsi b/arch/arm64/boot/dts/tesla/fsd-pinctrl.dtsi new file mode 100644 index 000000000000..d4d0cb005712 --- /dev/null +++ b/arch/arm64/boot/dts/tesla/fsd-pinctrl.dtsi @@ -0,0 +1,335 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Tesla Full Self-Driving SoC device tree source + * + * Copyright (c) 2017-2021 Samsung Electronics Co., Ltd. + * https://www.samsung.com + * Copyright (c) 2017-2021 Tesla, Inc. + * https://www.tesla.com + */ + +#include <dt-bindings/pinctrl/samsung.h> + +&pinctrl_fsys0 { + gpf0: gpf0-gpio-bank { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpf1: gpf1-gpio-bank { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpf6: gpf6-gpio-bank { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpf4: gpf4-gpio-bank { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpf5: gpf5-gpio-bank { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; +}; + +&pinctrl_peric { + gpc8: gpc8-gpio-bank { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpf2: gpf2-gpio-bank { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpf3: gpf3-gpio-bank { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpd0: gpd0-gpio-bank { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpb0: gpb0-gpio-bank { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpb1: gpb1-gpio-bank { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpb4: gpb4-gpio-bank { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpb5: gpb5-gpio-bank { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpb6: gpb6-gpio-bank { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpb7: gpb7-gpio-bank { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpd1: gpd1-gpio-bank { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpd2: gpd2-gpio-bank { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpd3: gpd3-gpio-bank { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpg0: gpg0-gpio-bank { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpg1: gpg1-gpio-bank { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpg2: gpg2-gpio-bank { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpg3: gpg3-gpio-bank { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpg4: gpg4-gpio-bank { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpg5: gpg5-gpio-bank { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpg6: gpg6-gpio-bank { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpg7: gpg7-gpio-bank { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + pwm0_out: pwm0-out-pins { + samsung,pins = "gpb6-1"; + samsung,pin-function = <EXYNOS_PIN_FUNC_2>; + samsung,pin-pud = <EXYNOS_PIN_PULL_UP>; + samsung,pin-drv = <EXYNOS4_PIN_DRV_LV2>; + }; + + pwm1_out: pwm1-out-pins { + samsung,pins = "gpb6-5"; + samsung,pin-function = <EXYNOS_PIN_FUNC_2>; + samsung,pin-pud = <EXYNOS_PIN_PULL_UP>; + samsung,pin-drv = <EXYNOS4_PIN_DRV_LV2>; + }; + + hs_i2c0_bus: hs-i2c0-bus-pins { + samsung,pins = "gpb0-0", "gpb0-1"; + samsung,pin-function = <EXYNOS_PIN_FUNC_2>; + samsung,pin-pud = <EXYNOS_PIN_PULL_UP>; + samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>; + }; + + hs_i2c1_bus: hs-i2c1-bus-pins { + samsung,pins = "gpb0-2", "gpb0-3"; + samsung,pin-function = <EXYNOS_PIN_FUNC_2>; + samsung,pin-pud = <EXYNOS_PIN_PULL_UP>; + samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>; + }; + + hs_i2c2_bus: hs-i2c2-bus-pins { + samsung,pins = "gpb0-4", "gpb0-5"; + samsung,pin-function = <EXYNOS_PIN_FUNC_2>; + samsung,pin-pud = <EXYNOS_PIN_PULL_UP>; + samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>; + }; + + hs_i2c3_bus: hs-i2c3-bus-pins { + samsung,pins = "gpb0-6", "gpb0-7"; + samsung,pin-function = <EXYNOS_PIN_FUNC_2>; + samsung,pin-pud = <EXYNOS_PIN_PULL_UP>; + samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>; + }; + + hs_i2c4_bus: hs-i2c4-bus-pins { + samsung,pins = "gpb1-0", "gpb1-1"; + samsung,pin-function = <EXYNOS_PIN_FUNC_2>; + samsung,pin-pud = <EXYNOS_PIN_PULL_UP>; + samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>; + }; + + hs_i2c5_bus: hs-i2c5-bus-pins { + samsung,pins = "gpb1-2", "gpb1-3"; + samsung,pin-function = <EXYNOS_PIN_FUNC_2>; + samsung,pin-pud = <EXYNOS_PIN_PULL_UP>; + samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>; + }; + + hs_i2c6_bus: hs-i2c6-bus-pins { + samsung,pins = "gpb1-4", "gpb1-5"; + samsung,pin-function = <EXYNOS_PIN_FUNC_2>; + samsung,pin-pud = <EXYNOS_PIN_PULL_UP>; + samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>; + }; + + hs_i2c7_bus: hs-i2c7-bus-pins { + samsung,pins = "gpb1-6", "gpb1-7"; + samsung,pin-function = <EXYNOS_PIN_FUNC_2>; + samsung,pin-pud = <EXYNOS_PIN_PULL_UP>; + samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>; + }; + + uart0_data: uart0-data-pins { + samsung,pins = "gpb7-0", "gpb7-1"; + samsung,pin-function = <EXYNOS_PIN_FUNC_2>; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>; + }; + + uart1_data: uart1-data-pins { + samsung,pins = "gpb7-4", "gpb7-5"; + samsung,pin-function = <EXYNOS_PIN_FUNC_2>; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>; + }; + + spi0_bus: spi0-bus-pins { + samsung,pins = "gpb4-0", "gpb4-2", "gpb4-3"; + samsung,pin-function = <EXYNOS_PIN_FUNC_2>; + samsung,pin-pud = <EXYNOS_PIN_PULL_UP>; + samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>; + }; + + spi1_bus: spi1-bus-pins { + samsung,pins = "gpb4-4", "gpb4-6", "gpb4-7"; + samsung,pin-function = <EXYNOS_PIN_FUNC_2>; + samsung,pin-pud = <EXYNOS_PIN_PULL_UP>; + samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>; + }; + + spi2_bus: spi2-bus-pins { + samsung,pins = "gpb5-0", "gpb5-2", "gpb5-3"; + samsung,pin-function = <EXYNOS_PIN_FUNC_2>; + samsung,pin-pud = <EXYNOS_PIN_PULL_UP>; + samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>; + }; +}; + +&pinctrl_pmu { + gpq0: gpq0-gpio-bank { + gpio-controller; + #gpio-cells = <2>; + }; +}; diff --git a/arch/arm64/boot/dts/tesla/fsd.dtsi b/arch/arm64/boot/dts/tesla/fsd.dtsi new file mode 100644 index 000000000000..9a652abcbcac --- /dev/null +++ b/arch/arm64/boot/dts/tesla/fsd.dtsi @@ -0,0 +1,754 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Tesla Full Self-Driving SoC device tree source + * + * Copyright (c) 2017-2022 Samsung Electronics Co., Ltd. + * https://www.samsung.com + * Copyright (c) 2017-2022 Tesla, Inc. + * https://www.tesla.com + */ + +#include <dt-bindings/clock/fsd-clk.h> +#include <dt-bindings/interrupt-controller/arm-gic.h> + +/ { + compatible = "tesla,fsd"; + interrupt-parent = <&gic>; + #address-cells = <2>; + #size-cells = <2>; + + aliases { + i2c0 = &hsi2c_0; + i2c1 = &hsi2c_1; + i2c2 = &hsi2c_2; + i2c3 = &hsi2c_3; + i2c4 = &hsi2c_4; + i2c5 = &hsi2c_5; + i2c6 = &hsi2c_6; + i2c7 = &hsi2c_7; + pinctrl0 = &pinctrl_fsys0; + pinctrl1 = &pinctrl_peric; + pinctrl2 = &pinctrl_pmu; + spi0 = &spi_0; + spi1 = &spi_1; + spi2 = &spi_2; + }; + + cpus { + #address-cells = <2>; + #size-cells = <0>; + + cpu-map { + cluster0 { + core0 { + cpu = <&cpucl0_0>; + }; + core1 { + cpu = <&cpucl0_1>; + }; + core2 { + cpu = <&cpucl0_2>; + }; + core3 { + cpu = <&cpucl0_3>; + }; + }; + + cluster1 { + core0 { + cpu = <&cpucl1_0>; + }; + core1 { + cpu = <&cpucl1_1>; + }; + core2 { + cpu = <&cpucl1_2>; + }; + core3 { + cpu = <&cpucl1_3>; + }; + }; + + cluster2 { + core0 { + cpu = <&cpucl2_0>; + }; + core1 { + cpu = <&cpucl2_1>; + }; + core2 { + cpu = <&cpucl2_2>; + }; + core3 { + cpu = <&cpucl2_3>; + }; + }; + }; + + /* Cluster 0 */ + cpucl0_0: cpu@0 { + device_type = "cpu"; + compatible = "arm,cortex-a72"; + reg = <0x0 0x000>; + enable-method = "psci"; + clock-frequency = <2400000000>; + cpu-idle-states = <&CPU_SLEEP>; + }; + + cpucl0_1: cpu@1 { + device_type = "cpu"; + compatible = "arm,cortex-a72"; + reg = <0x0 0x001>; + enable-method = "psci"; + clock-frequency = <2400000000>; + cpu-idle-states = <&CPU_SLEEP>; + }; + + cpucl0_2: cpu@2 { + device_type = "cpu"; + compatible = "arm,cortex-a72"; + reg = <0x0 0x002>; + enable-method = "psci"; + clock-frequency = <2400000000>; + cpu-idle-states = <&CPU_SLEEP>; + }; + + cpucl0_3: cpu@3 { + device_type = "cpu"; + compatible = "arm,cortex-a72"; + reg = <0x0 0x003>; + enable-method = "psci"; + cpu-idle-states = <&CPU_SLEEP>; + }; + + /* Cluster 1 */ + cpucl1_0: cpu@100 { + device_type = "cpu"; + compatible = "arm,cortex-a72"; + reg = <0x0 0x100>; + enable-method = "psci"; + clock-frequency = <2400000000>; + cpu-idle-states = <&CPU_SLEEP>; + }; + + cpucl1_1: cpu@101 { + device_type = "cpu"; + compatible = "arm,cortex-a72"; + reg = <0x0 0x101>; + enable-method = "psci"; + clock-frequency = <2400000000>; + cpu-idle-states = <&CPU_SLEEP>; + }; + + cpucl1_2: cpu@102 { + device_type = "cpu"; + compatible = "arm,cortex-a72"; + reg = <0x0 0x102>; + enable-method = "psci"; + clock-frequency = <2400000000>; + cpu-idle-states = <&CPU_SLEEP>; + }; + + cpucl1_3: cpu@103 { + device_type = "cpu"; + compatible = "arm,cortex-a72"; + reg = <0x0 0x103>; + enable-method = "psci"; + clock-frequency = <2400000000>; + cpu-idle-states = <&CPU_SLEEP>; + }; + + /* Cluster 2 */ + cpucl2_0: cpu@200 { + device_type = "cpu"; + compatible = "arm,cortex-a72"; + reg = <0x0 0x200>; + enable-method = "psci"; + clock-frequency = <2400000000>; + cpu-idle-states = <&CPU_SLEEP>; + }; + + cpucl2_1: cpu@201 { + device_type = "cpu"; + compatible = "arm,cortex-a72"; + reg = <0x0 0x201>; + enable-method = "psci"; + clock-frequency = <2400000000>; + cpu-idle-states = <&CPU_SLEEP>; + }; + + cpucl2_2: cpu@202 { + device_type = "cpu"; + compatible = "arm,cortex-a72"; + reg = <0x0 0x202>; + enable-method = "psci"; + clock-frequency = <2400000000>; + cpu-idle-states = <&CPU_SLEEP>; + }; + + cpucl2_3: cpu@203 { + device_type = "cpu"; + compatible = "arm,cortex-a72"; + reg = <0x0 0x203>; + enable-method = "psci"; + clock-frequency = <2400000000>; + cpu-idle-states = <&CPU_SLEEP>; + }; + + idle-states { + entry-method = "psci"; + + CPU_SLEEP: cpu-sleep { + idle-state-name = "c2"; + compatible = "arm,idle-state"; + local-timer-stop; + arm,psci-suspend-param = <0x0010000>; + entry-latency-us = <30>; + exit-latency-us = <75>; + min-residency-us = <300>; + }; + }; + }; + + arm-pmu { + compatible = "arm,armv8-pmuv3"; + interrupts = <GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 359 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 370 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 371 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 372 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 373 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 384 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 385 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 386 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 387 IRQ_TYPE_LEVEL_HIGH>; + interrupt-affinity = <&cpucl0_0>, <&cpucl0_1>, <&cpucl0_2>, + <&cpucl0_3>, <&cpucl1_0>, <&cpucl1_1>, + <&cpucl1_2>, <&cpucl1_3>, <&cpucl2_0>, + <&cpucl2_1>, <&cpucl2_2>, <&cpucl2_3>; + }; + + psci { + compatible = "arm,psci-1.0"; + method = "smc"; + }; + + timer { + compatible = "arm,armv8-timer"; + interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_LOW>, + <GIC_PPI 14 IRQ_TYPE_LEVEL_LOW>, + <GIC_PPI 11 IRQ_TYPE_LEVEL_LOW>, + <GIC_PPI 10 IRQ_TYPE_LEVEL_LOW>; + }; + + fin_pll: clock { + compatible = "fixed-clock"; + clock-output-names = "fin_pll"; + #clock-cells = <0>; + }; + + soc: soc@0 { + compatible = "simple-bus"; + #address-cells = <2>; + #size-cells = <2>; + ranges = <0x0 0x0 0x0 0x0 0x0 0x18000000>; + dma-ranges = <0x0 0x0 0x0 0x0 0x10 0x0>; + + gic: interrupt-controller@10400000 { + compatible = "arm,gic-v3"; + #interrupt-cells = <3>; + interrupt-controller; + reg = <0x0 0x10400000 0x0 0x10000>, /* GICD */ + <0x0 0x10600000 0x0 0x200000>; /* GICR_RD+GICR_SGI */ + interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>; + }; + + smmu_imem: iommu@10200000 { + compatible = "arm,mmu-500"; + reg = <0x0 0x10200000 0x0 0x10000>; + #iommu-cells = <2>; + #global-interrupts = <7>; + interrupts = <GIC_SPI 438 IRQ_TYPE_LEVEL_HIGH>, /* Global secure fault */ + <GIC_SPI 439 IRQ_TYPE_LEVEL_HIGH>, /* Global non-secure fault */ + <GIC_SPI 451 IRQ_TYPE_LEVEL_HIGH>, /* Combined secure interrupt */ + <GIC_SPI 450 IRQ_TYPE_LEVEL_HIGH>, /* Combined non-secure interrupt */ + /* Performance counter interrupts */ + <GIC_SPI 441 IRQ_TYPE_LEVEL_HIGH>, /* for FSYS1_0 */ + <GIC_SPI 442 IRQ_TYPE_LEVEL_HIGH>, /* for FSYS1_1 */ + <GIC_SPI 443 IRQ_TYPE_LEVEL_HIGH>, /* for IMEM_0 */ + /* Per context non-secure context interrupts, 0-3 interrupts */ + <GIC_SPI 446 IRQ_TYPE_LEVEL_HIGH>, /* for CONTEXT_0 */ + <GIC_SPI 447 IRQ_TYPE_LEVEL_HIGH>, /* for CONTEXT_1 */ + <GIC_SPI 448 IRQ_TYPE_LEVEL_HIGH>, /* for CONTEXT_2 */ + <GIC_SPI 449 IRQ_TYPE_LEVEL_HIGH>; /* for CONTEXT_3 */ + }; + + smmu_isp: iommu@12100000 { + compatible = "arm,mmu-500"; + reg = <0x0 0x12100000 0x0 0x10000>; + #iommu-cells = <2>; + #global-interrupts = <11>; + interrupts = <GIC_SPI 321 IRQ_TYPE_LEVEL_HIGH>, /* Global secure fault */ + <GIC_SPI 322 IRQ_TYPE_LEVEL_HIGH>, /* Global non-secure fault */ + <GIC_SPI 346 IRQ_TYPE_LEVEL_HIGH>, /* Combined secure interrupt */ + <GIC_SPI 345 IRQ_TYPE_LEVEL_HIGH>, /* Combined non-secure interrupt */ + /* Performance counter interrupts */ + <GIC_SPI 323 IRQ_TYPE_LEVEL_HIGH>, /* for CAM_CSI */ + <GIC_SPI 324 IRQ_TYPE_LEVEL_HIGH>, /* for CAM_DP_0 */ + <GIC_SPI 325 IRQ_TYPE_LEVEL_HIGH>, /* for CAM_DP_1 */ + <GIC_SPI 326 IRQ_TYPE_LEVEL_HIGH>, /* for CAM_ISP_0 */ + <GIC_SPI 327 IRQ_TYPE_LEVEL_HIGH>, /* for CAM_ISP_1 */ + <GIC_SPI 328 IRQ_TYPE_LEVEL_HIGH>, /* for CAM_MFC_0 */ + <GIC_SPI 329 IRQ_TYPE_LEVEL_HIGH>, /* for CAM_MFC_1 */ + /* Per context non-secure context interrupts, 0-7 interrupts */ + <GIC_SPI 330 IRQ_TYPE_LEVEL_HIGH>, /* for CONTEXT_0 */ + <GIC_SPI 331 IRQ_TYPE_LEVEL_HIGH>, /* for CONTEXT_1 */ + <GIC_SPI 332 IRQ_TYPE_LEVEL_HIGH>, /* for CONTEXT_2 */ + <GIC_SPI 333 IRQ_TYPE_LEVEL_HIGH>, /* for CONTEXT_3 */ + <GIC_SPI 334 IRQ_TYPE_LEVEL_HIGH>, /* for CONTEXT_4 */ + <GIC_SPI 335 IRQ_TYPE_LEVEL_HIGH>, /* for CONTEXT_5 */ + <GIC_SPI 336 IRQ_TYPE_LEVEL_HIGH>, /* for CONTEXT_6 */ + <GIC_SPI 337 IRQ_TYPE_LEVEL_HIGH>; /* for CONTEXT_7 */ + }; + + smmu_peric: iommu@14900000 { + compatible = "arm,mmu-500"; + reg = <0x0 0x14900000 0x0 0x10000>; + #iommu-cells = <2>; + #global-interrupts = <5>; + interrupts = <GIC_SPI 197 IRQ_TYPE_LEVEL_HIGH>, /* Global secure fault */ + <GIC_SPI 196 IRQ_TYPE_LEVEL_HIGH>, /* Global non-secure fault */ + <GIC_SPI 193 IRQ_TYPE_LEVEL_HIGH>, /* Combined secure interrupt */ + <GIC_SPI 192 IRQ_TYPE_LEVEL_HIGH>, /* Combined non-secure interrupt */ + /* Performance counter interrupts */ + <GIC_SPI 198 IRQ_TYPE_LEVEL_HIGH>, /* for PERIC */ + /* Per context non-secure context interrupts, 0-1 interrupts */ + <GIC_SPI 194 IRQ_TYPE_LEVEL_HIGH>, /* for CONTEXT_0 */ + <GIC_SPI 195 IRQ_TYPE_LEVEL_HIGH>; /* for CONTEXT_1 */ + }; + + smmu_fsys0: iommu@15450000 { + compatible = "arm,mmu-500"; + reg = <0x0 0x15450000 0x0 0x10000>; + #iommu-cells = <2>; + #global-interrupts = <5>; + interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>, /* Global secure fault */ + <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>, /* Global non-secure fault */ + <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>, /* Combined secure interrupt */ + <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>, /* Combined non-secure interrupt */ + /* Performance counter interrupts */ + <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>, /* for FSYS0 */ + /* Per context non-secure context interrupts, 0-1 interrupts */ + <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>, /* for CONTEXT_0 */ + <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>; /* for CONTEXT_1 */ + }; + + clock_imem: clock-controller@10010000 { + compatible = "tesla,fsd-clock-imem"; + reg = <0x0 0x10010000 0x0 0x3000>; + #clock-cells = <1>; + clocks = <&fin_pll>, + <&clock_cmu DOUT_CMU_IMEM_TCUCLK>, + <&clock_cmu DOUT_CMU_IMEM_ACLK>, + <&clock_cmu DOUT_CMU_IMEM_DMACLK>; + clock-names = "fin_pll", + "dout_cmu_imem_tcuclk", + "dout_cmu_imem_aclk", + "dout_cmu_imem_dmaclk"; + }; + + clock_cmu: clock-controller@11c10000 { + compatible = "tesla,fsd-clock-cmu"; + reg = <0x0 0x11c10000 0x0 0x3000>; + #clock-cells = <1>; + clocks = <&fin_pll>; + clock-names = "fin_pll"; + }; + + clock_csi: clock-controller@12610000 { + compatible = "tesla,fsd-clock-cam_csi"; + reg = <0x0 0x12610000 0x0 0x3000>; + #clock-cells = <1>; + clocks = <&fin_pll>; + clock-names = "fin_pll"; + }; + + clock_mfc: clock-controller@12810000 { + compatible = "tesla,fsd-clock-mfc"; + reg = <0x0 0x12810000 0x0 0x3000>; + #clock-cells = <1>; + clocks = <&fin_pll>; + clock-names = "fin_pll"; + }; + + clock_peric: clock-controller@14010000 { + compatible = "tesla,fsd-clock-peric"; + reg = <0x0 0x14010000 0x0 0x3000>; + #clock-cells = <1>; + clocks = <&fin_pll>, + <&clock_cmu DOUT_CMU_PLL_SHARED0_DIV4>, + <&clock_cmu DOUT_CMU_PERIC_SHARED1DIV36>, + <&clock_cmu DOUT_CMU_PERIC_SHARED0DIV3_TBUCLK>, + <&clock_cmu DOUT_CMU_PERIC_SHARED0DIV20>, + <&clock_cmu DOUT_CMU_PERIC_SHARED1DIV4_DMACLK>; + clock-names = "fin_pll", + "dout_cmu_pll_shared0_div4", + "dout_cmu_peric_shared1div36", + "dout_cmu_peric_shared0div3_tbuclk", + "dout_cmu_peric_shared0div20", + "dout_cmu_peric_shared1div4_dmaclk"; + }; + + clock_fsys0: clock-controller@15010000 { + compatible = "tesla,fsd-clock-fsys0"; + reg = <0x0 0x15010000 0x0 0x3000>; + #clock-cells = <1>; + clocks = <&fin_pll>, + <&clock_cmu DOUT_CMU_PLL_SHARED0_DIV6>, + <&clock_cmu DOUT_CMU_FSYS0_SHARED1DIV4>, + <&clock_cmu DOUT_CMU_FSYS0_SHARED0DIV4>; + clock-names = "fin_pll", + "dout_cmu_pll_shared0_div6", + "dout_cmu_fsys0_shared1div4", + "dout_cmu_fsys0_shared0div4"; + }; + + clock_fsys1: clock-controller@16810000 { + compatible = "tesla,fsd-clock-fsys1"; + reg = <0x0 0x16810000 0x0 0x3000>; + #clock-cells = <1>; + clocks = <&fin_pll>, + <&clock_cmu DOUT_CMU_FSYS1_SHARED0DIV8>, + <&clock_cmu DOUT_CMU_FSYS1_SHARED0DIV4>; + clock-names = "fin_pll", + "dout_cmu_fsys1_shared0div8", + "dout_cmu_fsys1_shared0div4"; + }; + + mdma0: dma-controller@10100000 { + compatible = "arm,pl330", "arm,primecell"; + reg = <0x0 0x10100000 0x0 0x1000>; + interrupts = <GIC_SPI 424 IRQ_TYPE_LEVEL_HIGH>; + #dma-cells = <1>; + #dma-channels = <8>; + #dma-requests = <32>; + clocks = <&clock_imem IMEM_DMA0_IPCLKPORT_ACLK>; + clock-names = "apb_pclk"; + iommus = <&smmu_imem 0x800 0x0>; + }; + + mdma1: dma-controller@10110000 { + compatible = "arm,pl330", "arm,primecell"; + reg = <0x0 0x10110000 0x0 0x1000>; + interrupts = <GIC_SPI 425 IRQ_TYPE_LEVEL_HIGH>; + #dma-cells = <1>; + #dma-channels = <8>; + #dma-requests = <32>; + clocks = <&clock_imem IMEM_DMA1_IPCLKPORT_ACLK>; + clock-names = "apb_pclk"; + iommus = <&smmu_imem 0x801 0x0>; + }; + + pdma0: dma-controller@14280000 { + compatible = "arm,pl330", "arm,primecell"; + reg = <0x0 0x14280000 0x0 0x1000>; + interrupts = <GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>; + #dma-cells = <1>; + #dma-channels = <8>; + #dma-requests = <32>; + clocks = <&clock_peric PERIC_DMA0_IPCLKPORT_ACLK>; + clock-names = "apb_pclk"; + iommus = <&smmu_peric 0x2 0x0>; + }; + + pdma1: dma-controller@14290000 { + compatible = "arm,pl330", "arm,primecell"; + reg = <0x0 0x14290000 0x0 0x1000>; + interrupts = <GIC_SPI 191 IRQ_TYPE_LEVEL_HIGH>; + #dma-cells = <1>; + #dma-channels = <8>; + #dma-requests = <32>; + clocks = <&clock_peric PERIC_DMA1_IPCLKPORT_ACLK>; + clock-names = "apb_pclk"; + iommus = <&smmu_peric 0x1 0x0>; + }; + + serial_0: serial@14180000 { + compatible = "samsung,exynos4210-uart"; + reg = <0x0 0x14180000 0x0 0x100>; + interrupts = <GIC_SPI 171 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&pdma1 1>, <&pdma1 0>; + dma-names = "rx", "tx"; + clocks = <&clock_peric PERIC_PCLK_UART0>, + <&clock_peric PERIC_SCLK_UART0>; + clock-names = "uart", "clk_uart_baud0"; + status = "disabled"; + }; + + serial_1: serial@14190000 { + compatible = "samsung,exynos4210-uart"; + reg = <0x0 0x14190000 0x0 0x100>; + interrupts = <GIC_SPI 172 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&pdma1 3>, <&pdma1 2>; + dma-names = "rx", "tx"; + clocks = <&clock_peric PERIC_PCLK_UART1>, + <&clock_peric PERIC_SCLK_UART1>; + clock-names = "uart", "clk_uart_baud0"; + status = "disabled"; + }; + + pmu_system_controller: system-controller@11400000 { + compatible = "samsung,exynos7-pmu", "syscon"; + reg = <0x0 0x11400000 0x0 0x5000>; + }; + + watchdog_0: watchdog@100a0000 { + compatible = "samsung,exynos7-wdt"; + reg = <0x0 0x100a0000 0x0 0x100>; + interrupts = <GIC_SPI 471 IRQ_TYPE_LEVEL_HIGH>; + samsung,syscon-phandle = <&pmu_system_controller>; + clocks = <&fin_pll>; + clock-names = "watchdog"; + }; + + watchdog_1: watchdog@100b0000 { + compatible = "samsung,exynos7-wdt"; + reg = <0x0 0x100b0000 0x0 0x100>; + interrupts = <GIC_SPI 472 IRQ_TYPE_LEVEL_HIGH>; + samsung,syscon-phandle = <&pmu_system_controller>; + clocks = <&fin_pll>; + clock-names = "watchdog"; + }; + + watchdog_2: watchdog@100c0000 { + compatible = "samsung,exynos7-wdt"; + reg = <0x0 0x100c0000 0x0 0x100>; + interrupts = <GIC_SPI 473 IRQ_TYPE_LEVEL_HIGH>; + samsung,syscon-phandle = <&pmu_system_controller>; + clocks = <&fin_pll>; + clock-names = "watchdog"; + }; + + pwm_0: pwm@14100000 { + compatible = "samsung,exynos4210-pwm"; + reg = <0x0 0x14100000 0x0 0x100>; + samsung,pwm-outputs = <0>, <1>, <2>, <3>; + #pwm-cells = <3>; + clocks = <&clock_peric PERIC_PWM0_IPCLKPORT_I_PCLK_S0>; + clock-names = "timers"; + status = "disabled"; + }; + + pwm_1: pwm@14110000 { + compatible = "samsung,exynos4210-pwm"; + reg = <0x0 0x14110000 0x0 0x100>; + samsung,pwm-outputs = <0>, <1>, <2>, <3>; + #pwm-cells = <3>; + clocks = <&clock_peric PERIC_PWM1_IPCLKPORT_I_PCLK_S0>; + clock-names = "timers"; + status = "disabled"; + }; + + hsi2c_0: i2c@14200000 { + compatible = "samsung,exynos7-hsi2c"; + reg = <0x0 0x14200000 0x0 0x1000>; + interrupts = <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + pinctrl-names = "default"; + pinctrl-0 = <&hs_i2c0_bus>; + clocks = <&clock_peric PERIC_PCLK_HSI2C0>; + clock-names = "hsi2c"; + status = "disabled"; + }; + + hsi2c_1: i2c@14210000 { + compatible = "samsung,exynos7-hsi2c"; + reg = <0x0 0x14210000 0x0 0x1000>; + interrupts = <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + pinctrl-names = "default"; + pinctrl-0 = <&hs_i2c1_bus>; + clocks = <&clock_peric PERIC_PCLK_HSI2C1>; + clock-names = "hsi2c"; + status = "disabled"; + }; + + hsi2c_2: i2c@14220000 { + compatible = "samsung,exynos7-hsi2c"; + reg = <0x0 0x14220000 0x0 0x1000>; + interrupts = <GIC_SPI 150 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + pinctrl-names = "default"; + pinctrl-0 = <&hs_i2c2_bus>; + clocks = <&clock_peric PERIC_PCLK_HSI2C2>; + clock-names = "hsi2c"; + status = "disabled"; + }; + + hsi2c_3: i2c@14230000 { + compatible = "samsung,exynos7-hsi2c"; + reg = <0x0 0x14230000 0x0 0x1000>; + interrupts = <GIC_SPI 151 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + pinctrl-names = "default"; + pinctrl-0 = <&hs_i2c3_bus>; + clocks = <&clock_peric PERIC_PCLK_HSI2C3>; + clock-names = "hsi2c"; + status = "disabled"; + }; + + hsi2c_4: i2c@14240000 { + compatible = "samsung,exynos7-hsi2c"; + reg = <0x0 0x14240000 0x0 0x1000>; + interrupts = <GIC_SPI 152 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + pinctrl-names = "default"; + pinctrl-0 = <&hs_i2c4_bus>; + clocks = <&clock_peric PERIC_PCLK_HSI2C4>; + clock-names = "hsi2c"; + status = "disabled"; + }; + + hsi2c_5: i2c@14250000 { + compatible = "samsung,exynos7-hsi2c"; + reg = <0x0 0x14250000 0x0 0x1000>; + interrupts = <GIC_SPI 153 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + pinctrl-names = "default"; + pinctrl-0 = <&hs_i2c5_bus>; + clocks = <&clock_peric PERIC_PCLK_HSI2C5>; + clock-names = "hsi2c"; + status = "disabled"; + }; + + hsi2c_6: i2c@14260000 { + compatible = "samsung,exynos7-hsi2c"; + reg = <0x0 0x14260000 0x0 0x1000>; + interrupts = <GIC_SPI 154 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + pinctrl-names = "default"; + pinctrl-0 = <&hs_i2c6_bus>; + clocks = <&clock_peric PERIC_PCLK_HSI2C6>; + clock-names = "hsi2c"; + status = "disabled"; + }; + + hsi2c_7: i2c@14270000 { + compatible = "samsung,exynos7-hsi2c"; + reg = <0x0 0x14270000 0x0 0x1000>; + interrupts = <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + pinctrl-names = "default"; + pinctrl-0 = <&hs_i2c7_bus>; + clocks = <&clock_peric PERIC_PCLK_HSI2C7>; + clock-names = "hsi2c"; + status = "disabled"; + }; + + pinctrl_pmu: pinctrl@114f0000 { + compatible = "tesla,fsd-pinctrl"; + reg = <0x0 0x114f0000 0x0 0x1000>; + }; + + pinctrl_peric: pinctrl@141f0000 { + compatible = "tesla,fsd-pinctrl"; + reg = <0x0 0x141f0000 0x0 0x1000>; + interrupts = <GIC_SPI 189 IRQ_TYPE_LEVEL_HIGH>; + }; + + pinctrl_fsys0: pinctrl@15020000 { + compatible = "tesla,fsd-pinctrl"; + reg = <0x0 0x15020000 0x0 0x1000>; + interrupts = <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>; + }; + + spi_0: spi@14140000 { + compatible = "tesla,fsd-spi"; + reg = <0x0 0x14140000 0x0 0x100>; + interrupts = <GIC_SPI 156 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&pdma1 4>, <&pdma1 5>; + dma-names = "tx", "rx"; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&clock_peric PERIC_PCLK_SPI0>, + <&clock_peric PERIC_SCLK_SPI0>; + clock-names = "spi", "spi_busclk0"; + samsung,spi-src-clk = <0>; + pinctrl-names = "default"; + pinctrl-0 = <&spi0_bus>; + num-cs = <1>; + status = "disabled"; + }; + + spi_1: spi@14150000 { + compatible = "tesla,fsd-spi"; + reg = <0x0 0x14150000 0x0 0x100>; + interrupts = <GIC_SPI 157 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&pdma1 6>, <&pdma1 7>; + dma-names = "tx", "rx"; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&clock_peric PERIC_PCLK_SPI1>, + <&clock_peric PERIC_SCLK_SPI1>; + clock-names = "spi", "spi_busclk0"; + samsung,spi-src-clk = <0>; + pinctrl-names = "default"; + pinctrl-0 = <&spi1_bus>; + num-cs = <1>; + status = "disabled"; + }; + + spi_2: spi@14160000 { + compatible = "tesla,fsd-spi"; + reg = <0x0 0x14160000 0x0 0x100>; + interrupts = <GIC_SPI 158 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&pdma1 8>, <&pdma1 9>; + dma-names = "tx", "rx"; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&clock_peric PERIC_PCLK_SPI2>, + <&clock_peric PERIC_SCLK_SPI2>; + clock-names = "spi", "spi_busclk0"; + samsung,spi-src-clk = <0>; + pinctrl-names = "default"; + pinctrl-0 = <&spi2_bus>; + num-cs = <1>; + status = "disabled"; + }; + + timer@10040000 { + compatible = "samsung,exynos4210-mct"; + reg = <0x0 0x10040000 0x0 0x800>; + interrupts = <GIC_SPI 455 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 456 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 457 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 458 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 459 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 460 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 461 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 462 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 463 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 464 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 465 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 466 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 467 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 468 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 469 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 470 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&fin_pll>, <&clock_imem IMEM_MCT_PCLK>; + clock-names = "fin_pll", "mct"; + }; + }; +}; + +#include "fsd-pinctrl.dtsi" diff --git a/arch/arm64/boot/dts/ti/Makefile b/arch/arm64/boot/dts/ti/Makefile index 90be511bc4d0..02e5d80344d0 100644 --- a/arch/arm64/boot/dts/ti/Makefile +++ b/arch/arm64/boot/dts/ti/Makefile @@ -21,3 +21,5 @@ dtb-$(CONFIG_ARCH_K3) += k3-j721s2-common-proc-board.dtb dtb-$(CONFIG_ARCH_K3) += k3-am642-evm.dtb dtb-$(CONFIG_ARCH_K3) += k3-am642-sk.dtb + +dtb-$(CONFIG_ARCH_K3) += k3-am625-sk.dtb diff --git a/arch/arm64/boot/dts/ti/k3-am62-main.dtsi b/arch/arm64/boot/dts/ti/k3-am62-main.dtsi new file mode 100644 index 000000000000..c68472c692f4 --- /dev/null +++ b/arch/arm64/boot/dts/ti/k3-am62-main.dtsi @@ -0,0 +1,267 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Device Tree Source for AM625 SoC Family Main Domain peripherals + * + * Copyright (C) 2020-2022 Texas Instruments Incorporated - https://www.ti.com/ + */ + +&cbass_main { + gic500: interrupt-controller@1800000 { + compatible = "arm,gic-v3"; + #address-cells = <2>; + #size-cells = <2>; + ranges; + #interrupt-cells = <3>; + interrupt-controller; + reg = <0x00 0x01800000 0x00 0x10000>, /* GICD */ + <0x00 0x01880000 0x00 0xc0000>, /* GICR */ + <0x00 0x01880000 0x00 0xc0000>, /* GICR */ + <0x01 0x00000000 0x00 0x2000>, /* GICC */ + <0x01 0x00010000 0x00 0x1000>, /* GICH */ + <0x01 0x00020000 0x00 0x2000>; /* GICV */ + /* + * vcpumntirq: + * virtual CPU interface maintenance interrupt + */ + interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>; + + gic_its: msi-controller@1820000 { + compatible = "arm,gic-v3-its"; + reg = <0x00 0x01820000 0x00 0x10000>; + socionext,synquacer-pre-its = <0x1000000 0x400000>; + msi-controller; + #msi-cells = <1>; + }; + }; + + main_conf: syscon@100000 { + compatible = "syscon", "simple-mfd"; + reg = <0x00 0x00100000 0x00 0x20000>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x00 0x00100000 0x20000>; + }; + + dmss: bus@48000000 { + compatible = "simple-mfd"; + #address-cells = <2>; + #size-cells = <2>; + dma-ranges; + ranges = <0x00 0x48000000 0x00 0x48000000 0x00 0x06400000>; + + ti,sci-dev-id = <25>; + + secure_proxy_main: mailbox@4d000000 { + compatible = "ti,am654-secure-proxy"; + #mbox-cells = <1>; + reg-names = "target_data", "rt", "scfg"; + reg = <0x00 0x4d000000 0x00 0x80000>, + <0x00 0x4a600000 0x00 0x80000>, + <0x00 0x4a400000 0x00 0x80000>; + interrupt-names = "rx_012"; + interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>; + }; + }; + + dmsc: system-controller@44043000 { + compatible = "ti,k2g-sci"; + ti,host-id = <12>; + mbox-names = "rx", "tx"; + mboxes= <&secure_proxy_main 12>, + <&secure_proxy_main 13>; + reg-names = "debug_messages"; + reg = <0x00 0x44043000 0x00 0xfe0>; + + k3_pds: power-controller { + compatible = "ti,sci-pm-domain"; + #power-domain-cells = <2>; + }; + + k3_clks: clock-controller { + compatible = "ti,k2g-sci-clk"; + #clock-cells = <2>; + }; + + k3_reset: reset-controller { + compatible = "ti,sci-reset"; + #reset-cells = <2>; + }; + }; + + main_pmx0: pinctrl@f4000 { + compatible = "pinctrl-single"; + reg = <0x00 0xf4000 0x00 0x2ac>; + #pinctrl-cells = <1>; + pinctrl-single,register-width = <32>; + pinctrl-single,function-mask = <0xffffffff>; + }; + + main_uart0: serial@2800000 { + compatible = "ti,am64-uart", "ti,am654-uart"; + reg = <0x00 0x02800000 0x00 0x100>; + interrupts = <GIC_SPI 178 IRQ_TYPE_LEVEL_HIGH>; + power-domains = <&k3_pds 146 TI_SCI_PD_EXCLUSIVE>; + clocks = <&k3_clks 146 0>; + clock-names = "fclk"; + }; + + main_uart1: serial@2810000 { + compatible = "ti,am64-uart", "ti,am654-uart"; + reg = <0x00 0x02810000 0x00 0x100>; + interrupts = <GIC_SPI 179 IRQ_TYPE_LEVEL_HIGH>; + power-domains = <&k3_pds 152 TI_SCI_PD_EXCLUSIVE>; + clocks = <&k3_clks 152 0>; + clock-names = "fclk"; + }; + + main_uart2: serial@2820000 { + compatible = "ti,am64-uart", "ti,am654-uart"; + reg = <0x00 0x02820000 0x00 0x100>; + interrupts = <GIC_SPI 180 IRQ_TYPE_LEVEL_HIGH>; + power-domains = <&k3_pds 153 TI_SCI_PD_EXCLUSIVE>; + clocks = <&k3_clks 153 0>; + clock-names = "fclk"; + }; + + main_uart3: serial@2830000 { + compatible = "ti,am64-uart", "ti,am654-uart"; + reg = <0x00 0x02830000 0x00 0x100>; + interrupts = <GIC_SPI 181 IRQ_TYPE_LEVEL_HIGH>; + power-domains = <&k3_pds 154 TI_SCI_PD_EXCLUSIVE>; + clocks = <&k3_clks 154 0>; + clock-names = "fclk"; + }; + + main_uart4: serial@2840000 { + compatible = "ti,am64-uart", "ti,am654-uart"; + reg = <0x00 0x02840000 0x00 0x100>; + interrupts = <GIC_SPI 182 IRQ_TYPE_LEVEL_HIGH>; + power-domains = <&k3_pds 155 TI_SCI_PD_EXCLUSIVE>; + clocks = <&k3_clks 155 0>; + clock-names = "fclk"; + }; + + main_uart5: serial@2850000 { + compatible = "ti,am64-uart", "ti,am654-uart"; + reg = <0x00 0x02850000 0x00 0x100>; + interrupts = <GIC_SPI 183 IRQ_TYPE_LEVEL_HIGH>; + power-domains = <&k3_pds 156 TI_SCI_PD_EXCLUSIVE>; + clocks = <&k3_clks 156 0>; + clock-names = "fclk"; + }; + + main_uart6: serial@2860000 { + compatible = "ti,am64-uart", "ti,am654-uart"; + reg = <0x00 0x02860000 0x00 0x100>; + interrupts = <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>; + power-domains = <&k3_pds 158 TI_SCI_PD_EXCLUSIVE>; + clocks = <&k3_clks 158 0>; + clock-names = "fclk"; + }; + + main_i2c0: i2c@20000000 { + compatible = "ti,am64-i2c", "ti,omap4-i2c"; + reg = <0x00 0x20000000 0x00 0x100>; + interrupts = <GIC_SPI 161 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + power-domains = <&k3_pds 102 TI_SCI_PD_EXCLUSIVE>; + clocks = <&k3_clks 102 2>; + clock-names = "fck"; + }; + + main_i2c1: i2c@20010000 { + compatible = "ti,am64-i2c", "ti,omap4-i2c"; + reg = <0x00 0x20010000 0x00 0x100>; + interrupts = <GIC_SPI 162 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + power-domains = <&k3_pds 103 TI_SCI_PD_EXCLUSIVE>; + clocks = <&k3_clks 103 2>; + clock-names = "fck"; + }; + + main_i2c2: i2c@20020000 { + compatible = "ti,am64-i2c", "ti,omap4-i2c"; + reg = <0x00 0x20020000 0x00 0x100>; + interrupts = <GIC_SPI 163 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + power-domains = <&k3_pds 104 TI_SCI_PD_EXCLUSIVE>; + clocks = <&k3_clks 104 2>; + clock-names = "fck"; + }; + + main_i2c3: i2c@20030000 { + compatible = "ti,am64-i2c", "ti,omap4-i2c"; + reg = <0x00 0x20030000 0x00 0x100>; + interrupts = <GIC_SPI 164 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + power-domains = <&k3_pds 105 TI_SCI_PD_EXCLUSIVE>; + clocks = <&k3_clks 105 2>; + clock-names = "fck"; + }; + + main_gpio_intr: interrupt-controller@a00000 { + compatible = "ti,sci-intr"; + reg = <0x00 0x00a00000 0x00 0x800>; + ti,intr-trigger-type = <1>; + interrupt-controller; + interrupt-parent = <&gic500>; + #interrupt-cells = <1>; + ti,sci = <&dmsc>; + ti,sci-dev-id = <3>; + ti,interrupt-ranges = <0 32 16>; + }; + + main_gpio0: gpio@600000 { + compatible = "ti,am64-gpio", "ti,keystone-gpio"; + reg = <0x0 0x00600000 0x0 0x100>; + gpio-controller; + #gpio-cells = <2>; + interrupt-parent = <&main_gpio_intr>; + interrupts = <190>, <191>, <192>, + <193>, <194>, <195>; + interrupt-controller; + #interrupt-cells = <2>; + ti,ngpio = <87>; + ti,davinci-gpio-unbanked = <0>; + power-domains = <&k3_pds 77 TI_SCI_PD_EXCLUSIVE>; + clocks = <&k3_clks 77 0>; + clock-names = "gpio"; + }; + + main_gpio1: gpio@601000 { + compatible = "ti,am64-gpio", "ti,keystone-gpio"; + reg = <0x0 0x00601000 0x0 0x100>; + gpio-controller; + #gpio-cells = <2>; + interrupt-parent = <&main_gpio_intr>; + interrupts = <180>, <181>, <182>, + <183>, <184>, <185>; + interrupt-controller; + #interrupt-cells = <2>; + ti,ngpio = <88>; + ti,davinci-gpio-unbanked = <0>; + power-domains = <&k3_pds 78 TI_SCI_PD_EXCLUSIVE>; + clocks = <&k3_clks 78 0>; + clock-names = "gpio"; + }; + + hwspinlock: spinlock@2a000000 { + compatible = "ti,am64-hwspinlock"; + reg = <0x00 0x2a000000 0x00 0x1000>; + #hwlock-cells = <1>; + }; + + mailbox0_cluster0: mailbox@29000000 { + compatible = "ti,am64-mailbox"; + reg = <0x00 0x29000000 0x00 0x200>; + interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>; + #mbox-cells = <1>; + ti,mbox-num-users = <4>; + ti,mbox-num-fifos = <16>; + }; +}; diff --git a/arch/arm64/boot/dts/ti/k3-am62-mcu.dtsi b/arch/arm64/boot/dts/ti/k3-am62-mcu.dtsi new file mode 100644 index 000000000000..9d210d55fc71 --- /dev/null +++ b/arch/arm64/boot/dts/ti/k3-am62-mcu.dtsi @@ -0,0 +1,36 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Device Tree Source for AM625 SoC Family MCU Domain peripherals + * + * Copyright (C) 2020-2022 Texas Instruments Incorporated - https://www.ti.com/ + */ + +&cbass_mcu { + mcu_pmx0: pinctrl@4084000 { + compatible = "pinctrl-single"; + reg = <0x00 0x04084000 0x00 0x88>; + #pinctrl-cells = <1>; + pinctrl-single,register-width = <32>; + pinctrl-single,function-mask = <0xffffffff>; + }; + + mcu_uart0: serial@4a00000 { + compatible = "ti,am64-uart", "ti,am654-uart"; + reg = <0x00 0x04a00000 0x00 0x100>; + interrupts = <GIC_SPI 185 IRQ_TYPE_LEVEL_HIGH>; + power-domains = <&k3_pds 149 TI_SCI_PD_EXCLUSIVE>; + clocks = <&k3_clks 149 0>; + clock-names = "fclk"; + }; + + mcu_i2c0: i2c@4900000 { + compatible = "ti,am64-i2c", "ti,omap4-i2c"; + reg = <0x00 0x04900000 0x00 0x100>; + interrupts = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + power-domains = <&k3_pds 106 TI_SCI_PD_EXCLUSIVE>; + clocks = <&k3_clks 106 2>; + clock-names = "fck"; + }; +}; diff --git a/arch/arm64/boot/dts/ti/k3-am62-wakeup.dtsi b/arch/arm64/boot/dts/ti/k3-am62-wakeup.dtsi new file mode 100644 index 000000000000..4090134676cf --- /dev/null +++ b/arch/arm64/boot/dts/ti/k3-am62-wakeup.dtsi @@ -0,0 +1,41 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Device Tree Source for AM625 SoC Family Wakeup Domain peripherals + * + * Copyright (C) 2020-2022 Texas Instruments Incorporated - https://www.ti.com/ + */ + +&cbass_wakeup { + wkup_conf: syscon@43000000 { + compatible = "syscon", "simple-mfd"; + reg = <0x00 0x43000000 0x00 0x20000>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x00 0x43000000 0x20000>; + + chipid: chipid@14 { + compatible = "ti,am654-chipid"; + reg = <0x14 0x4>; + }; + }; + + wkup_uart0: serial@2b300000 { + compatible = "ti,am64-uart", "ti,am654-uart"; + reg = <0x00 0x2b300000 0x00 0x100>; + interrupts = <GIC_SPI 186 IRQ_TYPE_LEVEL_HIGH>; + power-domains = <&k3_pds 114 TI_SCI_PD_EXCLUSIVE>; + clocks = <&k3_clks 114 0>; + clock-names = "fclk"; + }; + + wkup_i2c0: i2c@2b200000 { + compatible = "ti,am64-i2c", "ti,omap4-i2c"; + reg = <0x00 0x02b200000 0x00 0x100>; + interrupts = <GIC_SPI 165 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + power-domains = <&k3_pds 107 TI_SCI_PD_EXCLUSIVE>; + clocks = <&k3_clks 107 4>; + clock-names = "fck"; + }; +}; diff --git a/arch/arm64/boot/dts/ti/k3-am62.dtsi b/arch/arm64/boot/dts/ti/k3-am62.dtsi new file mode 100644 index 000000000000..bc2997b18556 --- /dev/null +++ b/arch/arm64/boot/dts/ti/k3-am62.dtsi @@ -0,0 +1,105 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Device Tree Source for AM62 SoC Family + * + * Copyright (C) 2020-2022 Texas Instruments Incorporated - https://www.ti.com/ + */ + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/interrupt-controller/irq.h> +#include <dt-bindings/interrupt-controller/arm-gic.h> +#include <dt-bindings/pinctrl/k3.h> +#include <dt-bindings/soc/ti,sci_pm_domain.h> + +/ { + model = "Texas Instruments K3 AM625 SoC"; + compatible = "ti,am625"; + interrupt-parent = <&gic500>; + #address-cells = <2>; + #size-cells = <2>; + + chosen { }; + + firmware { + optee { + compatible = "linaro,optee-tz"; + method = "smc"; + }; + + psci: psci { + compatible = "arm,psci-1.0"; + method = "smc"; + }; + }; + + a53_timer0: timer-cl0-cpu0 { + compatible = "arm,armv8-timer"; + interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_LOW>, /* cntpsirq */ + <GIC_PPI 14 IRQ_TYPE_LEVEL_LOW>, /* cntpnsirq */ + <GIC_PPI 11 IRQ_TYPE_LEVEL_LOW>, /* cntvirq */ + <GIC_PPI 10 IRQ_TYPE_LEVEL_LOW>; /* cnthpirq */ + }; + + pmu: pmu { + compatible = "arm,cortex-a53-pmu"; + interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_HIGH>; + }; + + cbass_main: bus@f0000 { + compatible = "simple-bus"; + #address-cells = <2>; + #size-cells = <2>; + + ranges = <0x00 0x000f0000 0x00 0x000f0000 0x00 0x00030000>, /* Main MMRs */ + <0x00 0x00420000 0x00 0x00420000 0x00 0x00001000>, /* ESM0 */ + <0x00 0x00600000 0x00 0x00600000 0x00 0x00001100>, /* GPIO */ + <0x00 0x00703000 0x00 0x00703000 0x00 0x00000200>, /* USB0 debug trace */ + <0x00 0x0070c000 0x00 0x0070c000 0x00 0x00000200>, /* USB1 debug trace */ + <0x00 0x00a40000 0x00 0x00a40000 0x00 0x00000800>, /* Timesync router */ + <0x00 0x01000000 0x00 0x01000000 0x00 0x01b28400>, /* First peripheral window */ + <0x00 0x08000000 0x00 0x08000000 0x00 0x00200000>, /* Main CPSW */ + <0x00 0x0e000000 0x00 0x0e000000 0x00 0x01d20000>, /* Second peripheral window */ + <0x00 0x0fd00000 0x00 0x0fd00000 0x00 0x00020000>, /* GPU */ + <0x00 0x20000000 0x00 0x20000000 0x00 0x0a008000>, /* Third peripheral window */ + <0x00 0x30040000 0x00 0x30040000 0x00 0x00080000>, /* PRUSS-M */ + <0x00 0x30101000 0x00 0x30101000 0x00 0x00010100>, /* CSI window */ + <0x00 0x30200000 0x00 0x30200000 0x00 0x00010000>, /* DSS */ + <0x00 0x31000000 0x00 0x31000000 0x00 0x00050000>, /* USB0 DWC3 Core window */ + <0x00 0x31100000 0x00 0x31100000 0x00 0x00050000>, /* USB1 DWC3 Core window */ + <0x00 0x43600000 0x00 0x43600000 0x00 0x00010000>, /* SA3 sproxy data */ + <0x00 0x44043000 0x00 0x44043000 0x00 0x00000fe0>, /* TI SCI DEBUG */ + <0x00 0x44860000 0x00 0x44860000 0x00 0x00040000>, /* SA3 sproxy config */ + <0x00 0x48000000 0x00 0x48000000 0x00 0x06400000>, /* DMSS */ + <0x00 0x60000000 0x00 0x60000000 0x00 0x08000000>, /* FSS0 DAT1 */ + <0x00 0x70000000 0x00 0x70000000 0x00 0x00010000>, /* OCSRAM */ + <0x01 0x00000000 0x01 0x00000000 0x00 0x00310000>, /* A53 PERIPHBASE */ + <0x05 0x00000000 0x05 0x00000000 0x01 0x00000000>, /* FSS0 DAT3 */ + + /* MCU Domain Range */ + <0x00 0x04000000 0x00 0x04000000 0x00 0x01ff1400>, + + /* Wakeup Domain Range */ + <0x00 0x2b000000 0x00 0x2b000000 0x00 0x00300400>, + <0x00 0x43000000 0x00 0x43000000 0x00 0x00020000>; + + cbass_mcu: bus@4000000 { + compatible = "simple-bus"; + #address-cells = <2>; + #size-cells = <2>; + ranges = <0x00 0x04000000 0x00 0x04000000 0x00 0x01ff1400>; /* Peripheral window */ + }; + + cbass_wakeup: bus@2b000000 { + compatible = "simple-bus"; + #address-cells = <2>; + #size-cells = <2>; + ranges = <0x00 0x2b000000 0x00 0x2b000000 0x00 0x00300400>, /* Peripheral Window */ + <0x00 0x43000000 0x00 0x43000000 0x00 0x00020000>; + }; + }; +}; + +/* Now include the peripherals for each bus segments */ +#include "k3-am62-main.dtsi" +#include "k3-am62-mcu.dtsi" +#include "k3-am62-wakeup.dtsi" diff --git a/arch/arm64/boot/dts/ti/k3-am625-sk.dts b/arch/arm64/boot/dts/ti/k3-am625-sk.dts new file mode 100644 index 000000000000..0de4113ccd5d --- /dev/null +++ b/arch/arm64/boot/dts/ti/k3-am625-sk.dts @@ -0,0 +1,206 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * AM625 SK: https://www.ti.com/lit/zip/sprr448 + * + * Copyright (C) 2021-2022 Texas Instruments Incorporated - https://www.ti.com/ + */ + +/dts-v1/; + +#include <dt-bindings/leds/common.h> +#include <dt-bindings/gpio/gpio.h> +#include "k3-am625.dtsi" + +/ { + compatible = "ti,am625-sk", "ti,am625"; + model = "Texas Instruments AM625 SK"; + + aliases { + serial2 = &main_uart0; + }; + + chosen { + stdout-path = "serial2:115200n8"; + bootargs = "console=ttyS2,115200n8 earlycon=ns16550a,mmio32,0x02800000"; + }; + + memory@80000000 { + device_type = "memory"; + /* 2G RAM */ + reg = <0x00000000 0x80000000 0x00000000 0x80000000>; + + }; + + reserved-memory { + #address-cells = <2>; + #size-cells = <2>; + ranges; + + secure_tfa_ddr: tfa@9e780000 { + reg = <0x00 0x9e780000 0x00 0x80000>; + alignment = <0x1000>; + no-map; + }; + + secure_ddr: optee@9e800000 { + reg = <0x00 0x9e800000 0x00 0x01800000>; /* for OP-TEE */ + alignment = <0x1000>; + no-map; + }; + + wkup_r5fss0_core0_dma_memory_region: r5f-dma-memory@9db00000 { + compatible = "shared-dma-pool"; + reg = <0x00 0x9db00000 0x00 0xc00000>; + no-map; + }; + }; + + vmain_pd: regulator-0 { + /* TPS65988 PD CONTROLLER OUTPUT */ + compatible = "regulator-fixed"; + regulator-name = "vmain_pd"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-always-on; + regulator-boot-on; + }; + + vcc_5v0: regulator-1 { + /* Output of LM34936 */ + compatible = "regulator-fixed"; + regulator-name = "vcc_5v0"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + vin-supply = <&vmain_pd>; + regulator-always-on; + regulator-boot-on; + }; + + vcc_3v3_sys: regulator-2 { + /* output of LM61460-Q1 */ + compatible = "regulator-fixed"; + regulator-name = "vcc_3v3_sys"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + vin-supply = <&vmain_pd>; + regulator-always-on; + regulator-boot-on; + }; + + leds { + compatible = "gpio-leds"; + pinctrl-names = "default"; + pinctrl-0 = <&usr_led_pins_default>; + + led-0 { + label = "am62-sk:green:heartbeat"; + gpios = <&main_gpio1 49 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "heartbeat"; + function = LED_FUNCTION_HEARTBEAT; + default-state = "off"; + }; + }; +}; + +&main_pmx0 { + main_uart0_pins_default: main-uart0-pins-default { + pinctrl-single,pins = < + AM62X_IOPAD(0x1c8, PIN_INPUT, 0) /* (D14) UART0_RXD */ + AM62X_IOPAD(0x1cc, PIN_OUTPUT, 0) /* (E14) UART0_TXD */ + >; + }; + + main_i2c0_pins_default: main-i2c0-pins-default { + pinctrl-single,pins = < + AM62X_IOPAD(0x1e0, PIN_INPUT_PULLUP, 0) /* (B16) I2C0_SCL */ + AM62X_IOPAD(0x1e4, PIN_INPUT_PULLUP, 0) /* (A16) I2C0_SDA */ + >; + }; + + main_i2c1_pins_default: main-i2c1-pins-default { + pinctrl-single,pins = < + AM62X_IOPAD(0x1e8, PIN_INPUT_PULLUP, 0) /* (B17) I2C1_SCL */ + AM62X_IOPAD(0x1ec, PIN_INPUT_PULLUP, 0) /* (A17) I2C1_SDA */ + >; + }; + + usr_led_pins_default: usr-led-pins-default { + pinctrl-single,pins = < + AM62X_IOPAD(0x244, PIN_OUTPUT, 7) /* (C17) MMC1_SDWP.GPIO1_49 */ + >; + }; +}; + +&wkup_uart0 { + /* WKUP UART0 is used by DM firmware */ + status = "reserved"; +}; + +&mcu_uart0 { + status = "disabled"; +}; + +&main_uart0 { + pinctrl-names = "default"; + pinctrl-0 = <&main_uart0_pins_default>; +}; + +&main_uart1 { + /* Main UART1 is used by TIFS firmware */ + status = "reserved"; +}; + +&main_uart2 { + status = "disabled"; +}; + +&main_uart3 { + status = "disabled"; +}; + +&main_uart4 { + status = "disabled"; +}; + +&main_uart5 { + status = "disabled"; +}; + +&main_uart6 { + status = "disabled"; +}; + +&mcu_i2c0 { + status = "disabled"; +}; + +&wkup_i2c0 { + status = "disabled"; +}; + +&main_i2c0 { + pinctrl-names = "default"; + pinctrl-0 = <&main_i2c0_pins_default>; + clock-frequency = <400000>; +}; + +&main_i2c1 { + pinctrl-names = "default"; + pinctrl-0 = <&main_i2c1_pins_default>; + clock-frequency = <400000>; +}; + +&main_i2c2 { + status = "disabled"; +}; + +&main_i2c3 { + status = "disabled"; +}; + +&mailbox0_cluster0 { + mbox_m4_0: mbox-m4-0 { + ti,mbox-rx = <0 0 0>; + ti,mbox-tx = <1 0 0>; + }; +}; diff --git a/arch/arm64/boot/dts/ti/k3-am625.dtsi b/arch/arm64/boot/dts/ti/k3-am625.dtsi new file mode 100644 index 000000000000..887f31c23fef --- /dev/null +++ b/arch/arm64/boot/dts/ti/k3-am625.dtsi @@ -0,0 +1,103 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Device Tree Source for AM625 SoC family in Quad core configuration + * + * TRM: https://www.ti.com/lit/pdf/spruiv7 + * + * Copyright (C) 2020-2022 Texas Instruments Incorporated - https://www.ti.com/ + */ + +/dts-v1/; + +#include "k3-am62.dtsi" + +/ { + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu-map { + cluster0: cluster0 { + core0 { + cpu = <&cpu0>; + }; + + core1 { + cpu = <&cpu1>; + }; + + core2 { + cpu = <&cpu2>; + }; + + core3 { + cpu = <&cpu3>; + }; + }; + }; + + cpu0: cpu@0 { + compatible = "arm,cortex-a53"; + reg = <0x000>; + device_type = "cpu"; + enable-method = "psci"; + i-cache-size = <0x8000>; + i-cache-line-size = <64>; + i-cache-sets = <256>; + d-cache-size = <0x8000>; + d-cache-line-size = <64>; + d-cache-sets = <128>; + next-level-cache = <&L2_0>; + }; + + cpu1: cpu@1 { + compatible = "arm,cortex-a53"; + reg = <0x001>; + device_type = "cpu"; + enable-method = "psci"; + i-cache-size = <0x8000>; + i-cache-line-size = <64>; + i-cache-sets = <256>; + d-cache-size = <0x8000>; + d-cache-line-size = <64>; + d-cache-sets = <128>; + next-level-cache = <&L2_0>; + }; + + cpu2: cpu@2 { + compatible = "arm,cortex-a53"; + reg = <0x002>; + device_type = "cpu"; + enable-method = "psci"; + i-cache-size = <0x8000>; + i-cache-line-size = <64>; + i-cache-sets = <256>; + d-cache-size = <0x8000>; + d-cache-line-size = <64>; + d-cache-sets = <128>; + next-level-cache = <&L2_0>; + }; + + cpu3: cpu@3 { + compatible = "arm,cortex-a53"; + reg = <0x003>; + device_type = "cpu"; + enable-method = "psci"; + i-cache-size = <0x8000>; + i-cache-line-size = <64>; + i-cache-sets = <256>; + d-cache-size = <0x8000>; + d-cache-line-size = <64>; + d-cache-sets = <128>; + next-level-cache = <&L2_0>; + }; + }; + + L2_0: l2-cache0 { + compatible = "cache"; + cache-level = <2>; + cache-size = <0x40000>; + cache-line-size = <64>; + cache-sets = <512>; + }; +}; diff --git a/arch/arm64/boot/dts/ti/k3-am64-main.dtsi b/arch/arm64/boot/dts/ti/k3-am64-main.dtsi index 012011dc619a..f64b368c6c37 100644 --- a/arch/arm64/boot/dts/ti/k3-am64-main.dtsi +++ b/arch/arm64/boot/dts/ti/k3-am64-main.dtsi @@ -59,7 +59,10 @@ #interrupt-cells = <3>; interrupt-controller; reg = <0x00 0x01800000 0x00 0x10000>, /* GICD */ - <0x00 0x01840000 0x00 0xC0000>; /* GICR */ + <0x00 0x01840000 0x00 0xC0000>, /* GICR */ + <0x01 0x00000000 0x00 0x2000>, /* GICC */ + <0x01 0x00010000 0x00 0x1000>, /* GICH */ + <0x01 0x00020000 0x00 0x2000>; /* GICV */ /* * vcpumntirq: * virtual CPU interface maintenance interrupt @@ -982,6 +985,24 @@ clock-names = "fck"; }; + main_rti0: watchdog@e000000 { + compatible = "ti,j7-rti-wdt"; + reg = <0x00 0xe000000 0x00 0x100>; + clocks = <&k3_clks 125 0>; + power-domains = <&k3_pds 125 TI_SCI_PD_EXCLUSIVE>; + assigned-clocks = <&k3_clks 125 0>; + assigned-clock-parents = <&k3_clks 125 2>; + }; + + main_rti1: watchdog@e010000 { + compatible = "ti,j7-rti-wdt"; + reg = <0x00 0xe010000 0x00 0x100>; + clocks = <&k3_clks 126 0>; + power-domains = <&k3_pds 126 TI_SCI_PD_EXCLUSIVE>; + assigned-clocks = <&k3_clks 126 0>; + assigned-clock-parents = <&k3_clks 126 2>; + }; + icssg0: icssg@30000000 { compatible = "ti,am642-icssg"; reg = <0x00 0x30000000 0x00 0x80000>; diff --git a/arch/arm64/boot/dts/ti/k3-am64.dtsi b/arch/arm64/boot/dts/ti/k3-am64.dtsi index 120974726be8..016dd8511ca6 100644 --- a/arch/arm64/boot/dts/ti/k3-am64.dtsi +++ b/arch/arm64/boot/dts/ti/k3-am64.dtsi @@ -66,11 +66,14 @@ #address-cells = <2>; #size-cells = <2>; ranges = <0x00 0x000f4000 0x00 0x000f4000 0x00 0x000002d0>, /* PINCTRL */ + <0x00 0x00420000 0x00 0x00420000 0x00 0x00001000>, /* ESM0 */ <0x00 0x00600000 0x00 0x00600000 0x00 0x00001100>, /* GPIO */ <0x00 0x00a40000 0x00 0x00a40000 0x00 0x00000800>, /* Timesync router */ <0x00 0x01000000 0x00 0x01000000 0x00 0x02330400>, /* First peripheral window */ <0x00 0x08000000 0x00 0x08000000 0x00 0x00200000>, /* Main CPSW */ <0x00 0x0d000000 0x00 0x0d000000 0x00 0x00800000>, /* PCIE_CORE */ + <0x00 0x0e000000 0x00 0x0e000000 0x00 0x00000100>, /* Main RTI0 */ + <0x00 0x0e010000 0x00 0x0e010000 0x00 0x00000100>, /* Main RTI1 */ <0x00 0x0f000000 0x00 0x0f000000 0x00 0x00c44200>, /* Second peripheral window */ <0x00 0x20000000 0x00 0x20000000 0x00 0x0a008000>, /* Third peripheral window */ <0x00 0x30000000 0x00 0x30000000 0x00 0x000bc100>, /* ICSSG0/1 */ @@ -87,6 +90,7 @@ <0x00 0x68000000 0x00 0x68000000 0x00 0x08000000>, /* PCIe DAT0 */ <0x00 0x70000000 0x00 0x70000000 0x00 0x00200000>, /* OC SRAM */ <0x00 0x78000000 0x00 0x78000000 0x00 0x00800000>, /* Main R5FSS */ + <0x01 0x00000000 0x01 0x00000000 0x00 0x00310000>, /* A53 PERIPHBASE */ <0x06 0x00000000 0x06 0x00000000 0x01 0x00000000>, /* PCIe DAT1 */ <0x05 0x00000000 0x05 0x00000000 0x01 0x00000000>, /* FSS0 DAT3 */ diff --git a/arch/arm64/boot/dts/ti/k3-am642-evm.dts b/arch/arm64/boot/dts/ti/k3-am642-evm.dts index e94ae178b1ae..8e7893e58b03 100644 --- a/arch/arm64/boot/dts/ti/k3-am642-evm.dts +++ b/arch/arm64/boot/dts/ti/k3-am642-evm.dts @@ -498,7 +498,7 @@ pinctrl-names = "default"; pinctrl-0 = <&ospi0_pins_default>; - flash@0{ + flash@0 { compatible = "jedec,spi-nor"; reg = <0x0>; spi-tx-bus-width = <8>; @@ -509,8 +509,6 @@ cdns,tchsh-ns = <60>; cdns,tslch-ns = <60>; cdns,read-delay = <4>; - #address-cells = <1>; - #size-cells = <1>; }; }; diff --git a/arch/arm64/boot/dts/ti/k3-am642-sk.dts b/arch/arm64/boot/dts/ti/k3-am642-sk.dts index a9785bec12df..1d7db8bf3a5c 100644 --- a/arch/arm64/boot/dts/ti/k3-am642-sk.dts +++ b/arch/arm64/boot/dts/ti/k3-am642-sk.dts @@ -369,7 +369,7 @@ pinctrl-names = "default"; pinctrl-0 = <&ospi0_pins_default>; - flash@0{ + flash@0 { compatible = "jedec,spi-nor"; reg = <0x0>; spi-tx-bus-width = <8>; @@ -380,8 +380,6 @@ cdns,tchsh-ns = <60>; cdns,tslch-ns = <60>; cdns,read-delay = <4>; - #address-cells = <1>; - #size-cells = <1>; }; }; diff --git a/arch/arm64/boot/dts/ti/k3-am65-iot2050-common.dtsi b/arch/arm64/boot/dts/ti/k3-am65-iot2050-common.dtsi index 3079eaee01c0..6e41f2fa044a 100644 --- a/arch/arm64/boot/dts/ti/k3-am65-iot2050-common.dtsi +++ b/arch/arm64/boot/dts/ti/k3-am65-iot2050-common.dtsi @@ -603,8 +603,6 @@ cdns,tchsh-ns = <60>; cdns,tslch-ns = <60>; cdns,read-delay = <2>; - #address-cells = <1>; - #size-cells = <1>; }; }; diff --git a/arch/arm64/boot/dts/ti/k3-am65-main.dtsi b/arch/arm64/boot/dts/ti/k3-am65-main.dtsi index ce8bb4a61011..e749343acced 100644 --- a/arch/arm64/boot/dts/ti/k3-am65-main.dtsi +++ b/arch/arm64/boot/dts/ti/k3-am65-main.dtsi @@ -35,7 +35,10 @@ #interrupt-cells = <3>; interrupt-controller; reg = <0x00 0x01800000 0x00 0x10000>, /* GICD */ - <0x00 0x01880000 0x00 0x90000>; /* GICR */ + <0x00 0x01880000 0x00 0x90000>, /* GICR */ + <0x00 0x6f000000 0x00 0x2000>, /* GICC */ + <0x00 0x6f010000 0x00 0x1000>, /* GICH */ + <0x00 0x6f020000 0x00 0x2000>; /* GICV */ /* * vcpumntirq: * virtual CPU interface maintenance interrupt diff --git a/arch/arm64/boot/dts/ti/k3-am65.dtsi b/arch/arm64/boot/dts/ti/k3-am65.dtsi index a58a39fa42db..c538a0bf3cdd 100644 --- a/arch/arm64/boot/dts/ti/k3-am65.dtsi +++ b/arch/arm64/boot/dts/ti/k3-am65.dtsi @@ -86,6 +86,7 @@ <0x00 0x46000000 0x00 0x46000000 0x00 0x00200000>, <0x00 0x47000000 0x00 0x47000000 0x00 0x00068400>, <0x00 0x50000000 0x00 0x50000000 0x00 0x8000000>, + <0x00 0x6f000000 0x00 0x6f000000 0x00 0x00310000>, /* A53 PERIPHBASE */ <0x00 0x70000000 0x00 0x70000000 0x00 0x200000>, <0x05 0x00000000 0x05 0x00000000 0x01 0x0000000>, <0x07 0x00000000 0x07 0x00000000 0x01 0x0000000>; diff --git a/arch/arm64/boot/dts/ti/k3-am654-base-board.dts b/arch/arm64/boot/dts/ti/k3-am654-base-board.dts index 9043f91c9bec..57497cb1ed68 100644 --- a/arch/arm64/boot/dts/ti/k3-am654-base-board.dts +++ b/arch/arm64/boot/dts/ti/k3-am654-base-board.dts @@ -333,14 +333,12 @@ #size-cells= <0>; ti,pindir-d0-out-d1-in; - flash@0{ + flash@0 { compatible = "jedec,spi-nor"; reg = <0x0>; spi-tx-bus-width = <1>; spi-rx-bus-width = <1>; spi-max-frequency = <48000000>; - #address-cells = <1>; - #size-cells= <1>; }; }; @@ -498,7 +496,7 @@ pinctrl-names = "default"; pinctrl-0 = <&mcu_fss0_ospi0_pins_default>; - flash@0{ + flash@0 { compatible = "jedec,spi-nor"; reg = <0x0>; spi-tx-bus-width = <8>; @@ -509,8 +507,6 @@ cdns,tchsh-ns = <60>; cdns,tslch-ns = <60>; cdns,read-delay = <0>; - #address-cells = <1>; - #size-cells = <1>; }; }; diff --git a/arch/arm64/boot/dts/ti/k3-j7200-main.dtsi b/arch/arm64/boot/dts/ti/k3-j7200-main.dtsi index 05a627ad6cdc..16684a2f054d 100644 --- a/arch/arm64/boot/dts/ti/k3-j7200-main.dtsi +++ b/arch/arm64/boot/dts/ti/k3-j7200-main.dtsi @@ -54,7 +54,10 @@ #interrupt-cells = <3>; interrupt-controller; reg = <0x00 0x01800000 0x00 0x10000>, /* GICD */ - <0x00 0x01900000 0x00 0x100000>; /* GICR */ + <0x00 0x01900000 0x00 0x100000>, /* GICR */ + <0x00 0x6f000000 0x00 0x2000>, /* GICC */ + <0x00 0x6f010000 0x00 0x1000>, /* GICH */ + <0x00 0x6f020000 0x00 0x2000>; /* GICV */ /* vcpumntirq: virtual CPU interface maintenance interrupt */ interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>; diff --git a/arch/arm64/boot/dts/ti/k3-j7200-som-p0.dtsi b/arch/arm64/boot/dts/ti/k3-j7200-som-p0.dtsi index 34724440171a..2d615c3e9fa1 100644 --- a/arch/arm64/boot/dts/ti/k3-j7200-som-p0.dtsi +++ b/arch/arm64/boot/dts/ti/k3-j7200-som-p0.dtsi @@ -256,7 +256,7 @@ pinctrl-names = "default"; pinctrl-0 = <&mcu_fss0_ospi0_pins_default>; - flash@0{ + flash@0 { compatible = "jedec,spi-nor"; reg = <0x0>; spi-tx-bus-width = <8>; @@ -267,7 +267,5 @@ cdns,tchsh-ns = <60>; cdns,tslch-ns = <60>; cdns,read-delay = <4>; - #address-cells = <1>; - #size-cells = <1>; }; }; diff --git a/arch/arm64/boot/dts/ti/k3-j7200.dtsi b/arch/arm64/boot/dts/ti/k3-j7200.dtsi index 64fef4e67d76..b6da0454cc5b 100644 --- a/arch/arm64/boot/dts/ti/k3-j7200.dtsi +++ b/arch/arm64/boot/dts/ti/k3-j7200.dtsi @@ -129,6 +129,7 @@ <0x00 0x00a40000 0x00 0x00a40000 0x00 0x00000800>, /* timesync router */ <0x00 0x01000000 0x00 0x01000000 0x00 0x0d000000>, /* Most peripherals */ <0x00 0x30000000 0x00 0x30000000 0x00 0x0c400000>, /* MAIN NAVSS */ + <0x00 0x6f000000 0x00 0x6f000000 0x00 0x00310000>, /* A72 PERIPHBASE */ <0x00 0x70000000 0x00 0x70000000 0x00 0x00800000>, /* MSMC RAM */ <0x00 0x18000000 0x00 0x18000000 0x00 0x08000000>, /* PCIe1 DAT0 */ <0x41 0x00000000 0x41 0x00000000 0x01 0x00000000>, /* PCIe1 DAT1 */ diff --git a/arch/arm64/boot/dts/ti/k3-j721e-common-proc-board.dts b/arch/arm64/boot/dts/ti/k3-j721e-common-proc-board.dts index 2d7596911b27..f5ca8e26ed99 100644 --- a/arch/arm64/boot/dts/ti/k3-j721e-common-proc-board.dts +++ b/arch/arm64/boot/dts/ti/k3-j721e-common-proc-board.dts @@ -482,7 +482,7 @@ pinctrl-names = "default"; pinctrl-0 = <&mcu_fss0_ospi1_pins_default>; - flash@0{ + flash@0 { compatible = "jedec,spi-nor"; reg = <0x0>; spi-tx-bus-width = <1>; @@ -493,8 +493,6 @@ cdns,tchsh-ns = <60>; cdns,tslch-ns = <60>; cdns,read-delay = <2>; - #address-cells = <1>; - #size-cells = <1>; }; }; diff --git a/arch/arm64/boot/dts/ti/k3-j721e-main.dtsi b/arch/arm64/boot/dts/ti/k3-j721e-main.dtsi index 599861259a30..db0669985e42 100644 --- a/arch/arm64/boot/dts/ti/k3-j721e-main.dtsi +++ b/arch/arm64/boot/dts/ti/k3-j721e-main.dtsi @@ -76,7 +76,10 @@ #interrupt-cells = <3>; interrupt-controller; reg = <0x00 0x01800000 0x00 0x10000>, /* GICD */ - <0x00 0x01900000 0x00 0x100000>; /* GICR */ + <0x00 0x01900000 0x00 0x100000>, /* GICR */ + <0x00 0x6f000000 0x00 0x2000>, /* GICC */ + <0x00 0x6f010000 0x00 0x1000>, /* GICH */ + <0x00 0x6f020000 0x00 0x2000>; /* GICV */ /* vcpumntirq: virtual CPU interface maintenance interrupt */ interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>; diff --git a/arch/arm64/boot/dts/ti/k3-j721e-sk.dts b/arch/arm64/boot/dts/ti/k3-j721e-sk.dts index b726310d867c..f25d85169e0d 100644 --- a/arch/arm64/boot/dts/ti/k3-j721e-sk.dts +++ b/arch/arm64/boot/dts/ti/k3-j721e-sk.dts @@ -475,8 +475,6 @@ cdns,tchsh-ns = <60>; cdns,tslch-ns = <60>; cdns,read-delay = <4>; - #address-cells = <1>; - #size-cells = <1>; }; }; diff --git a/arch/arm64/boot/dts/ti/k3-j721e-som-p0.dtsi b/arch/arm64/boot/dts/ti/k3-j721e-som-p0.dtsi index 2fee2906183d..e36335232cf8 100644 --- a/arch/arm64/boot/dts/ti/k3-j721e-som-p0.dtsi +++ b/arch/arm64/boot/dts/ti/k3-j721e-som-p0.dtsi @@ -171,7 +171,7 @@ pinctrl-names = "default"; pinctrl-0 = <&mcu_fss0_ospi0_pins_default>; - flash@0{ + flash@0 { compatible = "jedec,spi-nor"; reg = <0x0>; spi-tx-bus-width = <8>; @@ -182,8 +182,6 @@ cdns,tchsh-ns = <60>; cdns,tslch-ns = <60>; cdns,read-delay = <0>; - #address-cells = <1>; - #size-cells = <1>; }; }; diff --git a/arch/arm64/boot/dts/ti/k3-j721e.dtsi b/arch/arm64/boot/dts/ti/k3-j721e.dtsi index 4a3872fce533..0e23886c9fd1 100644 --- a/arch/arm64/boot/dts/ti/k3-j721e.dtsi +++ b/arch/arm64/boot/dts/ti/k3-j721e.dtsi @@ -139,6 +139,7 @@ <0x00 0x0e000000 0x00 0x0e000000 0x00 0x01800000>, /* PCIe Core*/ <0x00 0x10000000 0x00 0x10000000 0x00 0x10000000>, /* PCIe DAT */ <0x00 0x64800000 0x00 0x64800000 0x00 0x00800000>, /* C71 */ + <0x00 0x6f000000 0x00 0x6f000000 0x00 0x00310000>, /* A72 PERIPHBASE */ <0x44 0x00000000 0x44 0x00000000 0x00 0x08000000>, /* PCIe2 DAT */ <0x44 0x10000000 0x44 0x10000000 0x00 0x08000000>, /* PCIe3 DAT */ <0x4d 0x80800000 0x4d 0x80800000 0x00 0x00800000>, /* C66_0 */ diff --git a/arch/arm64/boot/dts/ti/k3-j721s2-main.dtsi b/arch/arm64/boot/dts/ti/k3-j721s2-main.dtsi index b04db1d3ab61..be7f39299894 100644 --- a/arch/arm64/boot/dts/ti/k3-j721s2-main.dtsi +++ b/arch/arm64/boot/dts/ti/k3-j721s2-main.dtsi @@ -34,7 +34,10 @@ #interrupt-cells = <3>; interrupt-controller; reg = <0x00 0x01800000 0x00 0x200000>, /* GICD */ - <0x00 0x01900000 0x00 0x100000>; /* GICR */ + <0x00 0x01900000 0x00 0x100000>, /* GICR */ + <0x00 0x6f000000 0x00 0x2000>, /* GICC */ + <0x00 0x6f010000 0x00 0x1000>, /* GICH */ + <0x00 0x6f020000 0x00 0x2000>; /* GICV */ /* vcpumntirq: virtual CPU interface maintenance interrupt */ interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>; diff --git a/arch/arm64/boot/dts/ti/k3-j721s2-mcu-wakeup.dtsi b/arch/arm64/boot/dts/ti/k3-j721s2-mcu-wakeup.dtsi index 7521963719ff..6c5c02edb375 100644 --- a/arch/arm64/boot/dts/ti/k3-j721s2-mcu-wakeup.dtsi +++ b/arch/arm64/boot/dts/ti/k3-j721s2-mcu-wakeup.dtsi @@ -108,7 +108,7 @@ reg = <0x00 0x42110000 0x00 0x100>; gpio-controller; #gpio-cells = <2>; - interrupt-parent = <&main_gpio_intr>; + interrupt-parent = <&wkup_gpio_intr>; interrupts = <103>, <104>, <105>, <106>, <107>, <108>; interrupt-controller; #interrupt-cells = <2>; @@ -124,7 +124,7 @@ reg = <0x00 0x42100000 0x00 0x100>; gpio-controller; #gpio-cells = <2>; - interrupt-parent = <&main_gpio_intr>; + interrupt-parent = <&wkup_gpio_intr>; interrupts = <112>, <113>, <114>, <115>, <116>, <117>; interrupt-controller; #interrupt-cells = <2>; diff --git a/arch/arm64/boot/dts/ti/k3-j721s2.dtsi b/arch/arm64/boot/dts/ti/k3-j721s2.dtsi index fe5234c40f6c..7b930a85a29d 100644 --- a/arch/arm64/boot/dts/ti/k3-j721s2.dtsi +++ b/arch/arm64/boot/dts/ti/k3-j721s2.dtsi @@ -119,6 +119,7 @@ <0x00 0x18000000 0x00 0x18000000 0x00 0x08000000>, /* PCIe1 DAT0 */ <0x00 0x64800000 0x00 0x64800000 0x00 0x0070c000>, /* C71_1 */ <0x00 0x65800000 0x00 0x65800000 0x00 0x0070c000>, /* C71_2 */ + <0x00 0x6f000000 0x00 0x6f000000 0x00 0x00310000>, /* A72 PERIPHBASE */ <0x00 0x70000000 0x00 0x70000000 0x00 0x00400000>, /* MSMC RAM */ <0x00 0x30000000 0x00 0x30000000 0x00 0x0c400000>, /* MAIN NAVSS */ <0x41 0x00000000 0x41 0x00000000 0x01 0x00000000>, /* PCIe1 DAT1 */ diff --git a/arch/arm64/boot/dts/xilinx/zynqmp.dtsi b/arch/arm64/boot/dts/xilinx/zynqmp.dtsi index 74e66443e4ce..3e15391e5b37 100644 --- a/arch/arm64/boot/dts/xilinx/zynqmp.dtsi +++ b/arch/arm64/boot/dts/xilinx/zynqmp.dtsi @@ -254,106 +254,106 @@ }; /* GDMA */ - fpd_dma_chan1: dma@fd500000 { + fpd_dma_chan1: dma-controller@fd500000 { status = "disabled"; compatible = "xlnx,zynqmp-dma-1.0"; reg = <0x0 0xfd500000 0x0 0x1000>; interrupt-parent = <&gic>; interrupts = <0 124 4>; clock-names = "clk_main", "clk_apb"; + #dma-cells = <1>; xlnx,bus-width = <128>; - #stream-id-cells = <1>; iommus = <&smmu 0x14e8>; power-domains = <&zynqmp_firmware PD_GDMA>; }; - fpd_dma_chan2: dma@fd510000 { + fpd_dma_chan2: dma-controller@fd510000 { status = "disabled"; compatible = "xlnx,zynqmp-dma-1.0"; reg = <0x0 0xfd510000 0x0 0x1000>; interrupt-parent = <&gic>; interrupts = <0 125 4>; clock-names = "clk_main", "clk_apb"; + #dma-cells = <1>; xlnx,bus-width = <128>; - #stream-id-cells = <1>; iommus = <&smmu 0x14e9>; power-domains = <&zynqmp_firmware PD_GDMA>; }; - fpd_dma_chan3: dma@fd520000 { + fpd_dma_chan3: dma-controller@fd520000 { status = "disabled"; compatible = "xlnx,zynqmp-dma-1.0"; reg = <0x0 0xfd520000 0x0 0x1000>; interrupt-parent = <&gic>; interrupts = <0 126 4>; clock-names = "clk_main", "clk_apb"; + #dma-cells = <1>; xlnx,bus-width = <128>; - #stream-id-cells = <1>; iommus = <&smmu 0x14ea>; power-domains = <&zynqmp_firmware PD_GDMA>; }; - fpd_dma_chan4: dma@fd530000 { + fpd_dma_chan4: dma-controller@fd530000 { status = "disabled"; compatible = "xlnx,zynqmp-dma-1.0"; reg = <0x0 0xfd530000 0x0 0x1000>; interrupt-parent = <&gic>; interrupts = <0 127 4>; clock-names = "clk_main", "clk_apb"; + #dma-cells = <1>; xlnx,bus-width = <128>; - #stream-id-cells = <1>; iommus = <&smmu 0x14eb>; power-domains = <&zynqmp_firmware PD_GDMA>; }; - fpd_dma_chan5: dma@fd540000 { + fpd_dma_chan5: dma-controller@fd540000 { status = "disabled"; compatible = "xlnx,zynqmp-dma-1.0"; reg = <0x0 0xfd540000 0x0 0x1000>; interrupt-parent = <&gic>; interrupts = <0 128 4>; clock-names = "clk_main", "clk_apb"; + #dma-cells = <1>; xlnx,bus-width = <128>; - #stream-id-cells = <1>; iommus = <&smmu 0x14ec>; power-domains = <&zynqmp_firmware PD_GDMA>; }; - fpd_dma_chan6: dma@fd550000 { + fpd_dma_chan6: dma-controller@fd550000 { status = "disabled"; compatible = "xlnx,zynqmp-dma-1.0"; reg = <0x0 0xfd550000 0x0 0x1000>; interrupt-parent = <&gic>; interrupts = <0 129 4>; clock-names = "clk_main", "clk_apb"; + #dma-cells = <1>; xlnx,bus-width = <128>; - #stream-id-cells = <1>; iommus = <&smmu 0x14ed>; power-domains = <&zynqmp_firmware PD_GDMA>; }; - fpd_dma_chan7: dma@fd560000 { + fpd_dma_chan7: dma-controller@fd560000 { status = "disabled"; compatible = "xlnx,zynqmp-dma-1.0"; reg = <0x0 0xfd560000 0x0 0x1000>; interrupt-parent = <&gic>; interrupts = <0 130 4>; clock-names = "clk_main", "clk_apb"; + #dma-cells = <1>; xlnx,bus-width = <128>; - #stream-id-cells = <1>; iommus = <&smmu 0x14ee>; power-domains = <&zynqmp_firmware PD_GDMA>; }; - fpd_dma_chan8: dma@fd570000 { + fpd_dma_chan8: dma-controller@fd570000 { status = "disabled"; compatible = "xlnx,zynqmp-dma-1.0"; reg = <0x0 0xfd570000 0x0 0x1000>; interrupt-parent = <&gic>; interrupts = <0 131 4>; clock-names = "clk_main", "clk_apb"; + #dma-cells = <1>; xlnx,bus-width = <128>; - #stream-id-cells = <1>; iommus = <&smmu 0x14ef>; power-domains = <&zynqmp_firmware PD_GDMA>; }; @@ -375,106 +375,106 @@ * These dma channels, Users should ensure that these dma * Channels are allowed for non secure access. */ - lpd_dma_chan1: dma@ffa80000 { + lpd_dma_chan1: dma-controller@ffa80000 { status = "disabled"; compatible = "xlnx,zynqmp-dma-1.0"; reg = <0x0 0xffa80000 0x0 0x1000>; interrupt-parent = <&gic>; interrupts = <0 77 4>; clock-names = "clk_main", "clk_apb"; + #dma-cells = <1>; xlnx,bus-width = <64>; - #stream-id-cells = <1>; iommus = <&smmu 0x868>; power-domains = <&zynqmp_firmware PD_ADMA>; }; - lpd_dma_chan2: dma@ffa90000 { + lpd_dma_chan2: dma-controller@ffa90000 { status = "disabled"; compatible = "xlnx,zynqmp-dma-1.0"; reg = <0x0 0xffa90000 0x0 0x1000>; interrupt-parent = <&gic>; interrupts = <0 78 4>; clock-names = "clk_main", "clk_apb"; + #dma-cells = <1>; xlnx,bus-width = <64>; - #stream-id-cells = <1>; iommus = <&smmu 0x869>; power-domains = <&zynqmp_firmware PD_ADMA>; }; - lpd_dma_chan3: dma@ffaa0000 { + lpd_dma_chan3: dma-controller@ffaa0000 { status = "disabled"; compatible = "xlnx,zynqmp-dma-1.0"; reg = <0x0 0xffaa0000 0x0 0x1000>; interrupt-parent = <&gic>; interrupts = <0 79 4>; clock-names = "clk_main", "clk_apb"; + #dma-cells = <1>; xlnx,bus-width = <64>; - #stream-id-cells = <1>; iommus = <&smmu 0x86a>; power-domains = <&zynqmp_firmware PD_ADMA>; }; - lpd_dma_chan4: dma@ffab0000 { + lpd_dma_chan4: dma-controller@ffab0000 { status = "disabled"; compatible = "xlnx,zynqmp-dma-1.0"; reg = <0x0 0xffab0000 0x0 0x1000>; interrupt-parent = <&gic>; interrupts = <0 80 4>; clock-names = "clk_main", "clk_apb"; + #dma-cells = <1>; xlnx,bus-width = <64>; - #stream-id-cells = <1>; iommus = <&smmu 0x86b>; power-domains = <&zynqmp_firmware PD_ADMA>; }; - lpd_dma_chan5: dma@ffac0000 { + lpd_dma_chan5: dma-controller@ffac0000 { status = "disabled"; compatible = "xlnx,zynqmp-dma-1.0"; reg = <0x0 0xffac0000 0x0 0x1000>; interrupt-parent = <&gic>; interrupts = <0 81 4>; clock-names = "clk_main", "clk_apb"; + #dma-cells = <1>; xlnx,bus-width = <64>; - #stream-id-cells = <1>; iommus = <&smmu 0x86c>; power-domains = <&zynqmp_firmware PD_ADMA>; }; - lpd_dma_chan6: dma@ffad0000 { + lpd_dma_chan6: dma-controller@ffad0000 { status = "disabled"; compatible = "xlnx,zynqmp-dma-1.0"; reg = <0x0 0xffad0000 0x0 0x1000>; interrupt-parent = <&gic>; interrupts = <0 82 4>; clock-names = "clk_main", "clk_apb"; + #dma-cells = <1>; xlnx,bus-width = <64>; - #stream-id-cells = <1>; iommus = <&smmu 0x86d>; power-domains = <&zynqmp_firmware PD_ADMA>; }; - lpd_dma_chan7: dma@ffae0000 { + lpd_dma_chan7: dma-controller@ffae0000 { status = "disabled"; compatible = "xlnx,zynqmp-dma-1.0"; reg = <0x0 0xffae0000 0x0 0x1000>; interrupt-parent = <&gic>; interrupts = <0 83 4>; clock-names = "clk_main", "clk_apb"; + #dma-cells = <1>; xlnx,bus-width = <64>; - #stream-id-cells = <1>; iommus = <&smmu 0x86e>; power-domains = <&zynqmp_firmware PD_ADMA>; }; - lpd_dma_chan8: dma@ffaf0000 { + lpd_dma_chan8: dma-controller@ffaf0000 { status = "disabled"; compatible = "xlnx,zynqmp-dma-1.0"; reg = <0x0 0xffaf0000 0x0 0x1000>; interrupt-parent = <&gic>; interrupts = <0 84 4>; clock-names = "clk_main", "clk_apb"; + #dma-cells = <1>; xlnx,bus-width = <64>; - #stream-id-cells = <1>; iommus = <&smmu 0x86f>; power-domains = <&zynqmp_firmware PD_ADMA>; }; @@ -495,7 +495,6 @@ interrupts = <0 14 4>; #address-cells = <1>; #size-cells = <0>; - #stream-id-cells = <1>; iommus = <&smmu 0x872>; power-domains = <&zynqmp_firmware PD_NAND>; }; @@ -509,7 +508,6 @@ clock-names = "pclk", "hclk", "tx_clk"; #address-cells = <1>; #size-cells = <0>; - #stream-id-cells = <1>; iommus = <&smmu 0x874>; power-domains = <&zynqmp_firmware PD_ETH_0>; }; @@ -523,7 +521,6 @@ clock-names = "pclk", "hclk", "tx_clk"; #address-cells = <1>; #size-cells = <0>; - #stream-id-cells = <1>; iommus = <&smmu 0x875>; power-domains = <&zynqmp_firmware PD_ETH_1>; }; @@ -537,7 +534,6 @@ clock-names = "pclk", "hclk", "tx_clk"; #address-cells = <1>; #size-cells = <0>; - #stream-id-cells = <1>; iommus = <&smmu 0x876>; power-domains = <&zynqmp_firmware PD_ETH_2>; }; @@ -551,7 +547,6 @@ clock-names = "pclk", "hclk", "tx_clk"; #address-cells = <1>; #size-cells = <0>; - #stream-id-cells = <1>; iommus = <&smmu 0x877>; power-domains = <&zynqmp_firmware PD_ETH_3>; }; @@ -621,7 +616,6 @@ <0x0 0x0 0x0 0x2 &pcie_intc 0x2>, <0x0 0x0 0x0 0x3 &pcie_intc 0x3>, <0x0 0x0 0x0 0x4 &pcie_intc 0x4>; - #stream-id-cells = <1>; iommus = <&smmu 0x4d0>; power-domains = <&zynqmp_firmware PD_PCIE>; pcie_intc: legacy-interrupt-controller { @@ -642,7 +636,6 @@ <0x0 0xc0000000 0x0 0x8000000>; #address-cells = <1>; #size-cells = <0>; - #stream-id-cells = <1>; iommus = <&smmu 0x873>; power-domains = <&zynqmp_firmware PD_QSPI>; }; @@ -674,7 +667,6 @@ interrupts = <0 133 4>; power-domains = <&zynqmp_firmware PD_SATA>; resets = <&zynqmp_reset ZYNQMP_RESET_SATA>; - #stream-id-cells = <4>; iommus = <&smmu 0x4c0>, <&smmu 0x4c1>, <&smmu 0x4c2>, <&smmu 0x4c3>; }; @@ -686,7 +678,6 @@ interrupts = <0 48 4>; reg = <0x0 0xff160000 0x0 0x1000>; clock-names = "clk_xin", "clk_ahb"; - #stream-id-cells = <1>; iommus = <&smmu 0x870>; #clock-cells = <1>; clock-output-names = "clk_out_sd0", "clk_in_sd0"; @@ -700,7 +691,6 @@ interrupts = <0 49 4>; reg = <0x0 0xff170000 0x0 0x1000>; clock-names = "clk_xin", "clk_ahb"; - #stream-id-cells = <1>; iommus = <&smmu 0x871>; #clock-cells = <1>; clock-output-names = "clk_out_sd1", "clk_in_sd1"; @@ -825,7 +815,6 @@ interrupt-parent = <&gic>; interrupt-names = "dwc_usb3", "otg"; interrupts = <0 65 4>, <0 69 4>; - #stream-id-cells = <1>; iommus = <&smmu 0x860>; snps,quirk-frame-length-adjustment = <0x20>; /* dma-coherent; */ @@ -852,7 +841,6 @@ interrupt-parent = <&gic>; interrupt-names = "dwc_usb3", "otg"; interrupts = <0 70 4>, <0 74 4>; - #stream-id-cells = <1>; iommus = <&smmu 0x861>; snps,quirk-frame-length-adjustment = <0x20>; /* dma-coherent; */ |