diff options
Diffstat (limited to 'arch/arm64/boot/dts/nvidia/tegra210-smaug.dts')
| -rw-r--r-- | arch/arm64/boot/dts/nvidia/tegra210-smaug.dts | 171 |
1 files changed, 74 insertions, 97 deletions
diff --git a/arch/arm64/boot/dts/nvidia/tegra210-smaug.dts b/arch/arm64/boot/dts/nvidia/tegra210-smaug.dts index 2faab6390552..bd78378248a6 100644 --- a/arch/arm64/boot/dts/nvidia/tegra210-smaug.dts +++ b/arch/arm64/boot/dts/nvidia/tegra210-smaug.dts @@ -1330,7 +1330,6 @@ battery: bq27742@55 { compatible = "ti,bq27742"; reg = <0x55>; - battery-name = "battery"; }; }; }; @@ -1355,11 +1354,11 @@ maxim,enable-active-discharge; maxim,enable-bias-control; maxim,enable-etr; - maxim,enable-gpio = <&max77620 5 0>; + maxim,enable-gpio = <&pmic 5 0>; maxim,externally-enable; }; - max77620: max77620@3c { + pmic: pmic@3c { compatible = "maxim,max77620"; reg = <0x3c>; interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>; @@ -1373,8 +1372,8 @@ pinctrl-names = "default"; pinctrl-0 = <&max77620_default>; - max77620_default: pinmux@0 { - pin_gpio { + max77620_default: pinmux { + gpio0_1_2_7 { pins = "gpio0", "gpio1", "gpio2", "gpio7"; function = "gpio"; }; @@ -1384,7 +1383,7 @@ * sequence, So it must be sequenced up (automatically * set by OTP) and down properly. */ - pin_gpio3 { + gpio3 { pins = "gpio3"; function = "fps-out"; drive-open-drain = <1>; @@ -1393,13 +1392,13 @@ maxim,active-fps-power-down-slot = <2>; }; - pin_gpio5_6 { + gpio5_6 { pins = "gpio5", "gpio6"; function = "gpio"; drive-push-pull = <1>; }; - pin_32k { + gpio4 { pins = "gpio4"; function = "32k-out1"; }; @@ -1697,7 +1696,7 @@ }; }; - sdhci@700b0600 { + mmc@700b0600 { bus-width = <8>; non-removable; status = "okay"; @@ -1722,22 +1721,15 @@ status = "okay"; }; - agic@702f9000 { + interrupt-controller@702f9000 { status = "okay"; }; }; - clocks { - compatible = "simple-bus"; - #address-cells = <1>; - #size-cells = <0>; - - clk32k_in: clock@0 { - compatible = "fixed-clock"; - reg = <0>; - #clock-cells = <0>; - clock-frequency = <32768>; - }; + clk32k_in: clock@0 { + compatible = "fixed-clock"; + clock-frequency = <32768>; + #clock-cells = <0>; }; cpus { @@ -1815,88 +1807,73 @@ method = "smc"; }; - regulators { - compatible = "simple-bus"; - device_type = "fixed-regulators"; - #address-cells = <1>; - #size-cells = <0>; - - ppvar_sys: regulator@0 { - compatible = "regulator-fixed"; - reg = <0>; - regulator-name = "PPVAR_SYS"; - regulator-min-microvolt = <4400000>; - regulator-max-microvolt = <4400000>; - regulator-always-on; - }; + ppvar_sys: regulator@0 { + compatible = "regulator-fixed"; + regulator-name = "PPVAR_SYS"; + regulator-min-microvolt = <4400000>; + regulator-max-microvolt = <4400000>; + regulator-always-on; + }; - pplcd_vdd: regulator@1 { - compatible = "regulator-fixed"; - reg = <1>; - regulator-name = "PPLCD_VDD"; - regulator-min-microvolt = <4400000>; - regulator-max-microvolt = <4400000>; - gpio = <&gpio TEGRA_GPIO(V, 4) 0>; - enable-active-high; - regulator-boot-on; - }; + pplcd_vdd: regulator@1 { + compatible = "regulator-fixed"; + regulator-name = "PPLCD_VDD"; + regulator-min-microvolt = <4400000>; + regulator-max-microvolt = <4400000>; + gpio = <&gpio TEGRA_GPIO(V, 4) 0>; + enable-active-high; + regulator-boot-on; + }; - pp3000_always: regulator@2 { - compatible = "regulator-fixed"; - reg = <2>; - regulator-name = "PP3000_ALWAYS"; - regulator-min-microvolt = <3000000>; - regulator-max-microvolt = <3000000>; - regulator-always-on; - }; + pp3000_always: regulator@2 { + compatible = "regulator-fixed"; + regulator-name = "PP3000_ALWAYS"; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + regulator-always-on; + }; - pp3300: regulator@3 { - compatible = "regulator-fixed"; - reg = <3>; - regulator-name = "PP3300"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - regulator-boot-on; - regulator-always-on; - enable-active-high; - }; + pp3300: regulator@3 { + compatible = "regulator-fixed"; + regulator-name = "PP3300"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + regulator-always-on; + enable-active-high; + }; - pp5000: regulator@4 { - compatible = "regulator-fixed"; - reg = <4>; - regulator-name = "PP5000"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - regulator-always-on; - }; + pp5000: regulator@4 { + compatible = "regulator-fixed"; + regulator-name = "PP5000"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-always-on; + }; - pp1800_lcdio: regulator@5 { - compatible = "regulator-fixed"; - reg = <5>; - regulator-name = "PP1800_LCDIO"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - gpio = <&gpio TEGRA_GPIO(V, 3) 0>; - enable-active-high; - regulator-boot-on; - }; + pp1800_lcdio: regulator@5 { + compatible = "regulator-fixed"; + regulator-name = "PP1800_LCDIO"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + gpio = <&gpio TEGRA_GPIO(V, 3) 0>; + enable-active-high; + regulator-boot-on; + }; - pp1800_cam: regulator@6 { - compatible = "regulator-fixed"; - reg= <6>; - regulator-name = "PP1800_CAM"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - gpio = <&gpio TEGRA_GPIO(K, 3) 0>; - enable-active-high; - }; + pp1800_cam: regulator@6 { + compatible = "regulator-fixed"; + regulator-name = "PP1800_CAM"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + gpio = <&gpio TEGRA_GPIO(K, 3) 0>; + enable-active-high; + }; - usbc_vbus: regulator@7 { - compatible = "regulator-fixed"; - reg = <7>; - regulator-name = "USBC_VBUS"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - }; + usbc_vbus: regulator@7 { + compatible = "regulator-fixed"; + regulator-name = "USBC_VBUS"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; }; }; |