diff options
Diffstat (limited to 'arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi')
| -rw-r--r-- | arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi | 111 |
1 files changed, 105 insertions, 6 deletions
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi index 2946fd797121..c144d06a6e33 100644 --- a/arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi +++ b/arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi @@ -44,6 +44,7 @@ * OTHER DEALINGS IN THE SOFTWARE. */ #include <dt-bindings/interrupt-controller/arm-gic.h> +#include <dt-bindings/thermal/thermal.h> / { compatible = "fsl,ls1088a"; @@ -61,6 +62,7 @@ compatible = "arm,cortex-a53"; reg = <0x0>; clocks = <&clockgen 1 0>; + #cooling-cells = <2>; }; cpu1: cpu@1 { @@ -89,6 +91,7 @@ compatible = "arm,cortex-a53"; reg = <0x100>; clocks = <&clockgen 1 1>; + #cooling-cells = <2>; }; cpu5: cpu@101 { @@ -153,6 +156,91 @@ clocks = <&sysclk>; }; + tmu: tmu@1f80000 { + compatible = "fsl,qoriq-tmu"; + reg = <0x0 0x1f80000 0x0 0x10000>; + interrupts = <0 23 0x4>; + fsl,tmu-range = <0xb0000 0x9002a 0x6004c 0x30062>; + fsl,tmu-calibration = + /* Calibration data group 1 */ + <0x00000000 0x00000026 + 0x00000001 0x0000002d + 0x00000002 0x00000032 + 0x00000003 0x00000039 + 0x00000004 0x0000003f + 0x00000005 0x00000046 + 0x00000006 0x0000004d + 0x00000007 0x00000054 + 0x00000008 0x0000005a + 0x00000009 0x00000061 + 0x0000000a 0x0000006a + 0x0000000b 0x00000071 + /* Calibration data group 2 */ + 0x00010000 0x00000025 + 0x00010001 0x0000002c + 0x00010002 0x00000035 + 0x00010003 0x0000003d + 0x00010004 0x00000045 + 0x00010005 0x0000004e + 0x00010006 0x00000057 + 0x00010007 0x00000061 + 0x00010008 0x0000006b + 0x00010009 0x00000076 + /* Calibration data group 3 */ + 0x00020000 0x00000029 + 0x00020001 0x00000033 + 0x00020002 0x0000003d + 0x00020003 0x00000049 + 0x00020004 0x00000056 + 0x00020005 0x00000061 + 0x00020006 0x0000006d + /* Calibration data group 4 */ + 0x00030000 0x00000021 + 0x00030001 0x0000002a + 0x00030002 0x0000003c + 0x00030003 0x0000004e>; + little-endian; + #thermal-sensor-cells = <1>; + }; + + thermal-zones { + cpu_thermal: cpu-thermal { + polling-delay-passive = <1000>; + polling-delay = <5000>; + thermal-sensors = <&tmu 0>; + + trips { + cpu_alert: cpu-alert { + temperature = <85000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu_crit: cpu-crit { + temperature = <95000>; + hysteresis = <2000>; + type = "critical"; + }; + }; + + cooling-maps { + map0 { + trip = <&cpu_alert>; + cooling-device = + <&cpu0 THERMAL_NO_LIMIT + THERMAL_NO_LIMIT>; + }; + + map1 { + trip = <&cpu_alert>; + cooling-device = + <&cpu4 THERMAL_NO_LIMIT + THERMAL_NO_LIMIT>; + }; + }; + }; + }; + duart0: serial@21c0500 { compatible = "fsl,ns16550", "ns16550a"; reg = <0x0 0x21c0500 0x0 0x100>; @@ -216,10 +304,6 @@ little-endian; #address-cells = <2>; #size-cells = <1>; - - ranges = <0 0 0x5 0x80000000 0x08000000 - 2 0 0x5 0x30000000 0x00010000 - 3 0 0x5 0x20000000 0x00010000>; status = "disabled"; }; @@ -263,11 +347,26 @@ status = "disabled"; }; + esdhc: esdhc@2140000 { + compatible = "fsl,ls1088a-esdhc", "fsl,esdhc"; + reg = <0x0 0x2140000 0x0 0x10000>; + interrupts = <0 28 0x4>; /* Level high type */ + clock-frequency = <0>; + voltage-ranges = <1800 1800 3300 3300>; + sdhci,auto-cmd12; + little-endian; + bus-width = <4>; + status = "disabled"; + }; + sata: sata@3200000 { - compatible = "fsl,ls1088a-ahci", "fsl,ls1043a-ahci"; - reg = <0x0 0x3200000 0x0 0x10000>; + compatible = "fsl,ls1088a-ahci"; + reg = <0x0 0x3200000 0x0 0x10000>, + <0x7 0x100520 0x0 0x4>; + reg-names = "ahci", "sata-ecc"; interrupts = <0 133 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clockgen 4 3>; + dma-coherent; status = "disabled"; }; }; |