diff options
Diffstat (limited to 'arch/arm64/boot/dts/amlogic/meson-axg-jethome-jethub-j100.dts')
| -rw-r--r-- | arch/arm64/boot/dts/amlogic/meson-axg-jethome-jethub-j100.dts | 338 |
1 files changed, 4 insertions, 334 deletions
diff --git a/arch/arm64/boot/dts/amlogic/meson-axg-jethome-jethub-j100.dts b/arch/arm64/boot/dts/amlogic/meson-axg-jethome-jethub-j100.dts index 8b0d586aa84e..b2d6ba660914 100644 --- a/arch/arm64/boot/dts/amlogic/meson-axg-jethome-jethub-j100.dts +++ b/arch/arm64/boot/dts/amlogic/meson-axg-jethome-jethub-j100.dts @@ -1,270 +1,29 @@ // SPDX-License-Identifier: (GPL-2.0+ OR MIT) /* - * Copyright (c) 2021 Vyacheslav Bocharov <adeep@lexina.in> - * Copyright (c) 2020 JetHome - * Author: Aleksandr Kazantsev <ak@tvip.ru> - * Author: Alexey Shevelkin <ash@tvip.ru> + * Copyright (c) 2022 Vyacheslav Bocharov <adeep@lexina.in> + * Copyright (c) 2022 JetHome * Author: Vyacheslav Bocharov <adeep@lexina.in> */ /dts-v1/; -#include "meson-axg.dtsi" -#include <dt-bindings/input/input.h> -#include <dt-bindings/thermal/thermal.h> +#include "meson-axg-jethome-jethub-j1xx.dtsi" / { compatible = "jethome,jethub-j100", "amlogic,a113d", "amlogic,meson-axg"; - model = "JetHome JetHub J100"; - aliases { - serial0 = &uart_AO; /* Console */ - serial2 = &uart_AO_B; /* External UART (Wireless Module) */ - ethernet0 = ðmac; - }; - - chosen { - stdout-path = "serial0:115200n8"; - }; + model = "JetHome JetHub D1 (J100)"; /* 1024MB RAM */ memory@0 { device_type = "memory"; reg = <0x0 0x0 0x0 0x40000000>; }; - - reserved-memory { - linux,cma { - size = <0x0 0x400000>; - }; - }; - - emmc_pwrseq: emmc-pwrseq { - compatible = "mmc-pwrseq-emmc"; - reset-gpios = <&gpio BOOT_9 GPIO_ACTIVE_LOW>; - }; - - vcc_3v3: regulator-vcc_3v3 { - compatible = "regulator-fixed"; - regulator-name = "VCC_3V3"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - vin-supply = <&vddao_3v3>; - regulator-always-on; - }; - - vcc_5v: regulator-vcc_5v { - compatible = "regulator-fixed"; - regulator-name = "VCC5V"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - regulator-always-on; - }; - - vddao_3v3: regulator-vddao_3v3 { - compatible = "regulator-fixed"; - regulator-name = "VDDAO_3V3"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - vin-supply = <&vcc_5v>; - regulator-always-on; - }; - - vddio_ao18: regulator-vddio_ao18 { - compatible = "regulator-fixed"; - regulator-name = "VDDIO_AO18"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - vin-supply = <&vddao_3v3>; - regulator-always-on; - }; - - vddio_boot: regulator-vddio_boot { - compatible = "regulator-fixed"; - regulator-name = "VDDIO_BOOT"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - vin-supply = <&vddao_3v3>; - regulator-always-on; - }; - - vccq_1v8: regulator-vccq_1v8 { - compatible = "regulator-fixed"; - regulator-name = "VCCQ_1V8"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - vin-supply = <&vddao_3v3>; - regulator-always-on; - }; - - usb_pwr: regulator-usb_pwr { - compatible = "regulator-fixed"; - regulator-name = "USB_PWR"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - vin-supply = <&vcc_5v>; - regulator-always-on; - }; - - sdio_pwrseq: sdio-pwrseq { - compatible = "mmc-pwrseq-simple"; - reset-gpios = <&gpio GPIOX_7 GPIO_ACTIVE_LOW>; - clocks = <&wifi32k>; - clock-names = "ext_clock"; - }; - - wifi32k: wifi32k { - compatible = "pwm-clock"; - #clock-cells = <0>; - clock-frequency = <32768>; - pwms = <&pwm_ab 0 30518 0>; /* PWM_A at 32.768KHz */ - }; - - thermal-zones { - cpu_thermal: cpu-thermal { - polling-delay-passive = <250>; - polling-delay = <1000>; - thermal-sensors = <&scpi_sensors 0>; - trips { - cpu_passive: cpu-passive { - temperature = <70000>; /* millicelsius */ - hysteresis = <2000>; /* millicelsius */ - type = "passive"; - }; - - cpu_hot: cpu-hot { - temperature = <80000>; /* millicelsius */ - hysteresis = <2000>; /* millicelsius */ - type = "hot"; - }; - - cpu_critical: cpu-critical { - temperature = <100000>; /* millicelsius */ - hysteresis = <2000>; /* millicelsius */ - type = "critical"; - }; - }; - - cpu_cooling_maps: cooling-maps { - map0 { - trip = <&cpu_passive>; - cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, - <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, - <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, - <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; - }; - - map1 { - trip = <&cpu_hot>; - cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, - <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, - <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, - <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; - }; - }; - }; - }; - - onewire { - compatible = "w1-gpio"; - gpios = <&gpio GPIOA_14 GPIO_ACTIVE_HIGH>; - #gpio-cells = <1>; - }; -}; - -&efuse { - sn: sn@32 { - reg = <0x32 0x20>; - }; - - eth_mac: eth_mac@0 { - reg = <0x0 0x6>; - }; - - bt_mac: bt_mac@6 { - reg = <0x6 0x6>; - }; - - wifi_mac: wifi_mac@c { - reg = <0xc 0x6>; - }; - - bid: bid@12 { - reg = <0x12 0x20>; - }; -}; - -ðmac { - status = "okay"; - pinctrl-0 = <ð_rmii_x_pins>; - pinctrl-names = "default"; - phy-handle = <ð_phy0>; - phy-mode = "rmii"; - - mdio { - compatible = "snps,dwmac-mdio"; - #address-cells = <1>; - #size-cells = <0>; - - /* ICPlus IP101A/G Ethernet PHY (vendor_id=0x0243, model_id=0x0c54) */ - eth_phy0: ethernet-phy@0 { - /* compatible = "ethernet-phy-id0243.0c54";*/ - max-speed = <100>; - reg = <0>; - - reset-assert-us = <10000>; - reset-deassert-us = <10000>; - reset-gpios = <&gpio GPIOZ_5 GPIO_ACTIVE_LOW>; - }; - }; -}; - -/* Internal I2C bus (on CPU module) */ -&i2c1 { - status = "okay"; - pinctrl-0 = <&i2c1_z_pins>; - pinctrl-names = "default"; - - /* RTC */ - pcf8563: pcf8563@51 { - compatible = "nxp,pcf8563"; - reg = <0x51>; - status = "okay"; - }; }; -/* Peripheral I2C bus (on motherboard) */ -&i2c_AO { - status = "okay"; - pinctrl-0 = <&i2c_ao_sck_10_pins>, <&i2c_ao_sda_11_pins>; - pinctrl-names = "default"; -}; - -&pwm_ab { - status = "okay"; - pinctrl-0 = <&pwm_a_x20_pins>; - pinctrl-names = "default"; -}; /* wifi module */ &sd_emmc_b { - status = "okay"; - #address-cells = <1>; - #size-cells = <0>; - - pinctrl-0 = <&sdio_pins>; - pinctrl-1 = <&sdio_clk_gate_pins>; - pinctrl-names = "default", "clk-gate"; - - bus-width = <4>; - cap-sd-highspeed; - max-frequency = <50000000>; non-removable; - disable-wp; - - mmc-pwrseq = <&sdio_pwrseq>; - - vmmc-supply = <&vddao_3v3>; - vqmmc-supply = <&vddio_boot>; brcmf: wifi@1 { reg = <1>; @@ -272,99 +31,10 @@ }; }; -/* emmc storage */ -&sd_emmc_c { - status = "okay"; - pinctrl-0 = <&emmc_pins>, <&emmc_ds_pins>; - pinctrl-1 = <&emmc_clk_gate_pins>; - pinctrl-names = "default", "clk-gate"; - - bus-width = <8>; - cap-mmc-highspeed; - max-frequency = <200000000>; - non-removable; - disable-wp; - mmc-ddr-1_8v; - mmc-hs200-1_8v; - - mmc-pwrseq = <&emmc_pwrseq>; - - vmmc-supply = <&vcc_3v3>; - vqmmc-supply = <&vccq_1v8>; -}; - /* UART Bluetooth */ &uart_B { - status = "okay"; - pinctrl-0 = <&uart_b_z_pins>, <&uart_b_z_cts_rts_pins>; - pinctrl-names = "default"; - uart-has-rtscts; - bluetooth { compatible = "brcm,bcm43438-bt"; shutdown-gpios = <&gpio GPIOZ_7 GPIO_ACTIVE_HIGH>; }; }; - -/* UART Console */ -&uart_AO { - status = "okay"; - pinctrl-0 = <&uart_ao_a_pins>; - pinctrl-names = "default"; -}; - -/* UART Wireless module */ -&uart_AO_B { - status = "okay"; - pinctrl-0 = <&uart_ao_b_pins>; - pinctrl-names = "default"; -}; - -&usb { - status = "okay"; - phy-supply = <&usb_pwr>; -}; - -&spicc1 { - status = "okay"; - pinctrl-0 = <&spi1_x_pins>, <&spi1_ss0_x_pins>; - pinctrl-names = "default"; -}; - -&gpio { - gpio-line-names = - "", "", "", "", "", // 0 - 4 - "", "", "", "", "", // 5 - 9 - "UserButton", "", "", "", "", // 10 - 14 - "", "", "", "", "", // 15 - 19 - "", "", "", "", "", // 20 - 24 - "", "LedRed", "LedGreen", "Output3", "Output2", // 25 - 29 - "Output1", "", "", "", "", // 30 - 34 - "", "ZigBeeBOOT", "", "", "", // 35 - 39 - "1Wire", "ZigBeeRESET", "", "Input4", "Input3", // 40 - 44 - "Input2", "Input1", "", "", "", // 45 - 49 - "", "", "", "", "", // 50 - 54 - "", "", "", "", "", // 55 - 59 - "", "", "", "", "", // 60 - 64 - "", "", "", "", "", // 65 - 69 - "", "", "", "", "", // 70 - 74 - "", "", "", "", "", // 75 - 79 - "", "", "", "", "", // 80 - 84 - "", ""; // 85-86 -}; - -&cpu0 { - #cooling-cells = <2>; -}; - -&cpu1 { - #cooling-cells = <2>; -}; - -&cpu2 { - #cooling-cells = <2>; -}; - -&cpu3 { - #cooling-cells = <2>; -}; |