diff options
Diffstat (limited to 'arch/arm/mach-mmp/pxa168.c')
| -rw-r--r-- | arch/arm/mach-mmp/pxa168.c | 126 |
1 files changed, 1 insertions, 125 deletions
diff --git a/arch/arm/mach-mmp/pxa168.c b/arch/arm/mach-mmp/pxa168.c index 1e9389245d0e..565d4a6c3bd5 100644 --- a/arch/arm/mach-mmp/pxa168.c +++ b/arch/arm/mach-mmp/pxa168.c @@ -12,7 +12,6 @@ #include <linux/clk.h> #include <linux/clk/mmp.h> #include <linux/platform_device.h> -#include <linux/platform_data/mv_usb.h> #include <linux/dma-mapping.h> #include <asm/mach/time.h> @@ -21,13 +20,9 @@ #include "addr-map.h" #include "common.h" #include <linux/soc/mmp/cputype.h> +#include <linux/soc/pxa/mfp.h> #include "devices.h" -#include "irqs.h" -#include "mfp.h" #include "pxa168.h" -#include "regs-apbc.h" -#include "regs-apmu.h" -#include "regs-usb.h" #define MFPR_VIRT_BASE (APB_VIRT_BASE + 0x1e000) @@ -41,11 +36,6 @@ static struct mfp_addr_map pxa168_mfp_addr_map[] __initdata = MFP_ADDR_END, }; -void __init pxa168_init_irq(void) -{ - icu_init_irq(); -} - static int __init pxa168_init(void) { if (cpu_is_pxa168()) { @@ -59,117 +49,3 @@ static int __init pxa168_init(void) return 0; } postcore_initcall(pxa168_init); - -/* system timer - clock enabled, 3.25MHz */ -#define TIMER_CLK_RST (APBC_APBCLK | APBC_FNCLK | APBC_FNCLKSEL(3)) -#define APBC_TIMERS APBC_REG(0x34) - -void __init pxa168_timer_init(void) -{ - /* this is early, we have to initialize the CCU registers by - * ourselves instead of using clk_* API. Clock rate is defined - * by APBC_TIMERS_CLK_RST (3.25MHz) and enabled free-running - */ - __raw_writel(APBC_APBCLK | APBC_RST, APBC_TIMERS); - - /* 3.25MHz, bus/functional clock enabled, release reset */ - __raw_writel(TIMER_CLK_RST, APBC_TIMERS); - - mmp_timer_init(IRQ_PXA168_TIMER1, 3250000); -} - -void pxa168_clear_keypad_wakeup(void) -{ - uint32_t val; - uint32_t mask = APMU_PXA168_KP_WAKE_CLR; - - /* wake event clear is needed in order to clear keypad interrupt */ - val = __raw_readl(APMU_WAKE_CLR); - __raw_writel(val | mask, APMU_WAKE_CLR); -} - -/* on-chip devices */ -PXA168_DEVICE(uart1, "pxa2xx-uart", 0, UART1, 0xd4017000, 0x30, 21, 22); -PXA168_DEVICE(uart2, "pxa2xx-uart", 1, UART2, 0xd4018000, 0x30, 23, 24); -PXA168_DEVICE(uart3, "pxa2xx-uart", 2, UART3, 0xd4026000, 0x30, 23, 24); -PXA168_DEVICE(twsi0, "pxa2xx-i2c", 0, TWSI0, 0xd4011000, 0x28); -PXA168_DEVICE(twsi1, "pxa2xx-i2c", 1, TWSI1, 0xd4025000, 0x28); -PXA168_DEVICE(pwm1, "pxa168-pwm", 0, NONE, 0xd401a000, 0x10); -PXA168_DEVICE(pwm2, "pxa168-pwm", 1, NONE, 0xd401a400, 0x10); -PXA168_DEVICE(pwm3, "pxa168-pwm", 2, NONE, 0xd401a800, 0x10); -PXA168_DEVICE(pwm4, "pxa168-pwm", 3, NONE, 0xd401ac00, 0x10); -PXA168_DEVICE(nand, "pxa3xx-nand", -1, NAND, 0xd4283000, 0x80, 97, 99); -PXA168_DEVICE(ssp1, "pxa168-ssp", 0, SSP1, 0xd401b000, 0x40, 52, 53); -PXA168_DEVICE(ssp2, "pxa168-ssp", 1, SSP2, 0xd401c000, 0x40, 54, 55); -PXA168_DEVICE(ssp3, "pxa168-ssp", 2, SSP3, 0xd401f000, 0x40, 56, 57); -PXA168_DEVICE(ssp4, "pxa168-ssp", 3, SSP4, 0xd4020000, 0x40, 58, 59); -PXA168_DEVICE(ssp5, "pxa168-ssp", 4, SSP5, 0xd4021000, 0x40, 60, 61); -PXA168_DEVICE(fb, "pxa168-fb", -1, LCD, 0xd420b000, 0x1c8); -PXA168_DEVICE(keypad, "pxa27x-keypad", -1, KEYPAD, 0xd4012000, 0x4c); -PXA168_DEVICE(eth, "pxa168-eth", -1, MFU, 0xc0800000, 0x0fff); - -struct resource pxa168_resource_gpio[] = { - { - .start = 0xd4019000, - .end = 0xd4019fff, - .flags = IORESOURCE_MEM, - }, { - .start = IRQ_PXA168_GPIOX, - .end = IRQ_PXA168_GPIOX, - .name = "gpio_mux", - .flags = IORESOURCE_IRQ, - }, -}; - -struct platform_device pxa168_device_gpio = { - .name = "mmp-gpio", - .id = -1, - .num_resources = ARRAY_SIZE(pxa168_resource_gpio), - .resource = pxa168_resource_gpio, -}; - -struct resource pxa168_usb_host_resources[] = { - /* USB Host conroller register base */ - [0] = { - .start = PXA168_U2H_REGBASE + U2x_CAPREGS_OFFSET, - .end = PXA168_U2H_REGBASE + USB_REG_RANGE, - .flags = IORESOURCE_MEM, - .name = "capregs", - }, - /* USB PHY register base */ - [1] = { - .start = PXA168_U2H_PHYBASE, - .end = PXA168_U2H_PHYBASE + USB_PHY_RANGE, - .flags = IORESOURCE_MEM, - .name = "phyregs", - }, - [2] = { - .start = IRQ_PXA168_USB2, - .end = IRQ_PXA168_USB2, - .flags = IORESOURCE_IRQ, - }, -}; - -static u64 pxa168_usb_host_dmamask = DMA_BIT_MASK(32); -struct platform_device pxa168_device_usb_host = { - .name = "pxa-sph", - .id = -1, - .dev = { - .dma_mask = &pxa168_usb_host_dmamask, - .coherent_dma_mask = DMA_BIT_MASK(32), - }, - - .num_resources = ARRAY_SIZE(pxa168_usb_host_resources), - .resource = pxa168_usb_host_resources, -}; - -int __init pxa168_add_usb_host(struct mv_usb_platform_data *pdata) -{ - pxa168_device_usb_host.dev.platform_data = pdata; - return platform_device_register(&pxa168_device_usb_host); -} - -void pxa168_restart(enum reboot_mode mode, const char *cmd) -{ - soft_restart(0xffff0000); -} |