1 files changed, 0 insertions, 128 deletions
diff --git a/arch/arm/mach-ep93xx/simone.c b/arch/arm/mach-ep93xx/simone.c
deleted file mode 100644
index 569e72413561..000000000000
--- a/arch/arm/mach-ep93xx/simone.c
+++ /dev/null
@@ -1,128 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * arch/arm/mach-ep93xx/simone.c
- * Simplemachines Sim.One support.
- *
- * Copyright (C) 2010 Ryan Mallon
- *
- * Based on the 2.6.24.7 support:
- *   Copyright (C) 2009 Simplemachines
- *   MMC support by Peter Ivanov <ivanovp@gmail.com>, 2007
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/i2c.h>
-#include <linux/mmc/host.h>
-#include <linux/spi/spi.h>
-#include <linux/spi/mmc_spi.h>
-#include <linux/platform_data/video-ep93xx.h>
-#include <linux/platform_data/spi-ep93xx.h>
-#include <linux/gpio.h>
-#include <linux/gpio/machine.h>
-
-#include "hardware.h"
-#include "gpio-ep93xx.h"
-
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-
-#include "soc.h"
-
-static struct ep93xx_eth_data __initdata simone_eth_data = {
-	.phy_id		= 1,
-};
-
-static struct ep93xxfb_mach_info __initdata simone_fb_info = {
-	.flags		= EP93XXFB_USE_SDCSN0 | EP93XXFB_PCLK_FALLING,
-};
-
-static struct mmc_spi_platform_data simone_mmc_spi_data = {
-	.detect_delay	= 500,
-	.ocr_mask	= MMC_VDD_32_33 | MMC_VDD_33_34,
-};
-
-static struct gpiod_lookup_table simone_mmc_spi_gpio_table = {
-	.dev_id = "mmc_spi.0", /* "mmc_spi" @ CS0 */
-	.table = {
-		/* Card detect */
-		GPIO_LOOKUP_IDX("A", 0, NULL, 0, GPIO_ACTIVE_LOW),
-		{ },
-	},
-};
-
-static struct spi_board_info simone_spi_devices[] __initdata = {
-	{
-		.modalias		= "mmc_spi",
-		.platform_data		= &simone_mmc_spi_data,
-		/*
-		 * We use 10 MHz even though the maximum is 3.7 MHz. The driver
-		 * will limit it automatically to max. frequency.
-		 */
-		.max_speed_hz		= 10 * 1000 * 1000,
-		.bus_num		= 0,
-		.chip_select		= 0,
-		.mode			= SPI_MODE_3,
-	},
-};
-
-/*
- * Up to v1.3, the Sim.One used SFRMOUT as SD card chip select, but this goes
- * low between multi-message command blocks. From v1.4, it uses a GPIO instead.
- * v1.3 parts will still work, since the signal on SFRMOUT is automatic.
- */
-static struct gpiod_lookup_table simone_spi_cs_gpio_table = {
-	.dev_id = "spi0",
-	.table = {
-		GPIO_LOOKUP("A", 1, "cs", GPIO_ACTIVE_LOW),
-		{ },
-	},
-};
-
-static struct ep93xx_spi_info simone_spi_info __initdata = {
-	.use_dma = 1,
-};
-
-static struct i2c_board_info __initdata simone_i2c_board_info[] = {
-	{
-		I2C_BOARD_INFO("ds1337", 0x68),
-	},
-};
-
-static struct platform_device simone_audio_device = {
-	.name		= "simone-audio",
-	.id		= -1,
-};
-
-static void __init simone_register_audio(void)
-{
-	ep93xx_register_ac97();
-	platform_device_register(&simone_audio_device);
-}
-
-static void __init simone_init_machine(void)
-{
-	ep93xx_init_devices();
-	ep93xx_register_flash(2, EP93XX_CS6_PHYS_BASE, SZ_8M);
-	ep93xx_register_eth(&simone_eth_data, 1);
-	ep93xx_register_fb(&simone_fb_info);
-	ep93xx_register_i2c(simone_i2c_board_info,
-			    ARRAY_SIZE(simone_i2c_board_info));
-	gpiod_add_lookup_table(&simone_mmc_spi_gpio_table);
-	gpiod_add_lookup_table(&simone_spi_cs_gpio_table);
-	ep93xx_register_spi(&simone_spi_info, simone_spi_devices,
-			    ARRAY_SIZE(simone_spi_devices));
-	simone_register_audio();
-}
-
-MACHINE_START(SIM_ONE, "Simplemachines Sim.One Board")
-	/* Maintainer: Ryan Mallon */
-	.atag_offset	= 0x100,
-	.nr_irqs	= NR_EP93XX_IRQS,
-	.map_io		= ep93xx_map_io,
-	.init_irq	= ep93xx_init_irq,
-	.init_time	= ep93xx_timer_init,
-	.init_machine	= simone_init_machine,
-	.restart	= ep93xx_restart,
-MACHINE_END