diff options
Diffstat (limited to 'arch/arm/mach-at91/pm_suspend.S')
| -rw-r--r-- | arch/arm/mach-at91/pm_suspend.S | 827 |
1 files changed, 617 insertions, 210 deletions
diff --git a/arch/arm/mach-at91/pm_suspend.S b/arch/arm/mach-at91/pm_suspend.S index b683c2caa40b..cbd61a3bcab1 100644 --- a/arch/arm/mach-at91/pm_suspend.S +++ b/arch/arm/mach-at91/pm_suspend.S @@ -22,39 +22,57 @@ tmp3 .req r6 /* * Wait until master clock is ready (after switching master clock source) + * + * @r_mckid: register holding master clock identifier + * + * Side effects: overwrites r7, r8 */ - .macro wait_mckrdy -1: ldr tmp1, [pmc, #AT91_PMC_SR] - tst tmp1, #AT91_PMC_MCKRDY - beq 1b + .macro wait_mckrdy r_mckid +#ifdef CONFIG_SOC_SAMA7 + cmp \r_mckid, #0 + beq 1f + mov r7, #AT91_PMC_MCKXRDY + b 2f +#endif +1: mov r7, #AT91_PMC_MCKRDY +2: ldr r8, [pmc, #AT91_PMC_SR] + and r8, r7 + cmp r8, r7 + bne 2b .endm /* * Wait until master oscillator has stabilized. + * + * Side effects: overwrites r7 */ .macro wait_moscrdy -1: ldr tmp1, [pmc, #AT91_PMC_SR] - tst tmp1, #AT91_PMC_MOSCS +1: ldr r7, [pmc, #AT91_PMC_SR] + tst r7, #AT91_PMC_MOSCS beq 1b .endm /* * Wait for main oscillator selection is done + * + * Side effects: overwrites r7 */ .macro wait_moscsels -1: ldr tmp1, [pmc, #AT91_PMC_SR] - tst tmp1, #AT91_PMC_MOSCSELS +1: ldr r7, [pmc, #AT91_PMC_SR] + tst r7, #AT91_PMC_MOSCSELS beq 1b .endm /* * Put the processor to enter the idle state + * + * Side effects: overwrites r7 */ .macro at91_cpu_idle #if defined(CONFIG_CPU_V7) - mov tmp1, #AT91_PMC_PCK - str tmp1, [pmc, #AT91_PMC_SCDR] + mov r7, #AT91_PMC_PCK + str r7, [pmc, #AT91_PMC_SCDR] dsb @@ -65,102 +83,375 @@ tmp3 .req r6 .endm +/** + * Set state for 2.5V low power regulator + * @ena: 0 - disable regulator + * 1 - enable regulator + * + * Side effects: overwrites r7, r8, r9, r10 + */ + .macro at91_2_5V_reg_set_low_power ena +#ifdef CONFIG_SOC_SAMA7 + ldr r7, .sfrbu + mov r8, #\ena + ldr r9, [r7, #AT91_SFRBU_25LDOCR] + orr r9, r9, #AT91_SFRBU_25LDOCR_LP + cmp r8, #1 + beq lp_done_\ena + bic r9, r9, #AT91_SFRBU_25LDOCR_LP +lp_done_\ena: + ldr r10, =AT91_SFRBU_25LDOCR_LDOANAKEY + orr r9, r9, r10 + str r9, [r7, #AT91_SFRBU_25LDOCR] +#endif + .endm + + .macro at91_backup_set_lpm reg +#ifdef CONFIG_SOC_SAMA7 + orr \reg, \reg, #0x200000 +#endif + .endm + .text .arm -/* - * void at91_suspend_sram_fn(struct at91_pm_data*) - * @input param: - * @r0: base address of struct at91_pm_data +#ifdef CONFIG_SOC_SAMA7 +/** + * Enable self-refresh + * + * Side effects: overwrites r2, r3, tmp1, tmp2, tmp3, r7 */ -/* at91_pm_suspend_in_sram must be 8-byte aligned per the requirements of fncpy() */ - .align 3 -ENTRY(at91_pm_suspend_in_sram) - /* Save registers on stack */ - stmfd sp!, {r4 - r12, lr} +.macro at91_sramc_self_refresh_ena + ldr r2, .sramc_base + ldr r3, .sramc_phy_base + ldr r7, .pm_mode - /* Drain write buffer */ + dsb + + /* Disable all AXI ports. */ + ldr tmp1, [r2, #UDDRC_PCTRL_0] + bic tmp1, tmp1, #0x1 + str tmp1, [r2, #UDDRC_PCTRL_0] + + ldr tmp1, [r2, #UDDRC_PCTRL_1] + bic tmp1, tmp1, #0x1 + str tmp1, [r2, #UDDRC_PCTRL_1] + + ldr tmp1, [r2, #UDDRC_PCTRL_2] + bic tmp1, tmp1, #0x1 + str tmp1, [r2, #UDDRC_PCTRL_2] + + ldr tmp1, [r2, #UDDRC_PCTRL_3] + bic tmp1, tmp1, #0x1 + str tmp1, [r2, #UDDRC_PCTRL_3] + + ldr tmp1, [r2, #UDDRC_PCTRL_4] + bic tmp1, tmp1, #0x1 + str tmp1, [r2, #UDDRC_PCTRL_4] + +sr_ena_1: + /* Wait for all ports to disable. */ + ldr tmp1, [r2, #UDDRC_PSTAT] + ldr tmp2, =UDDRC_PSTAT_ALL_PORTS + tst tmp1, tmp2 + bne sr_ena_1 + + /* Switch to self-refresh. */ + ldr tmp1, [r2, #UDDRC_PWRCTL] + orr tmp1, tmp1, #UDDRC_PWRCTRL_SELFREF_SW + str tmp1, [r2, #UDDRC_PWRCTL] + +sr_ena_2: + /* Wait for self-refresh enter. */ + ldr tmp1, [r2, #UDDRC_STAT] + bic tmp1, tmp1, #~UDDRC_STAT_SELFREF_TYPE_MSK + cmp tmp1, #UDDRC_STAT_SELFREF_TYPE_SW + bne sr_ena_2 + + /* Put DDR PHY's DLL in bypass mode for non-backup modes. */ + cmp r7, #AT91_PM_BACKUP + beq sr_ena_3 + ldr tmp1, [r3, #DDR3PHY_PIR] + orr tmp1, tmp1, #DDR3PHY_PIR_DLLBYP + str tmp1, [r3, #DDR3PHY_PIR] + +sr_ena_3: + /* Power down DDR PHY data receivers. */ + ldr tmp1, [r3, #DDR3PHY_DXCCR] + orr tmp1, tmp1, #DDR3PHY_DXCCR_DXPDR + str tmp1, [r3, #DDR3PHY_DXCCR] + + /* Power down ADDR/CMD IO. */ + ldr tmp1, [r3, #DDR3PHY_ACIOCR] + orr tmp1, tmp1, #DDR3PHY_ACIORC_ACPDD + orr tmp1, tmp1, #DDR3PHY_ACIOCR_CKPDD_CK0 + orr tmp1, tmp1, #DDR3PHY_ACIOCR_CSPDD_CS0 + str tmp1, [r3, #DDR3PHY_ACIOCR] + + /* Power down ODT. */ + ldr tmp1, [r3, #DDR3PHY_DSGCR] + orr tmp1, tmp1, #DDR3PHY_DSGCR_ODTPDD_ODT0 + str tmp1, [r3, #DDR3PHY_DSGCR] +.endm + +/** + * Disable self-refresh + * + * Side effects: overwrites r2, r3, tmp1, tmp2, tmp3 + */ +.macro at91_sramc_self_refresh_dis + ldr r2, .sramc_base + ldr r3, .sramc_phy_base + + /* Power up DDR PHY data receivers. */ + ldr tmp1, [r3, #DDR3PHY_DXCCR] + bic tmp1, tmp1, #DDR3PHY_DXCCR_DXPDR + str tmp1, [r3, #DDR3PHY_DXCCR] + + /* Power up the output of CK and CS pins. */ + ldr tmp1, [r3, #DDR3PHY_ACIOCR] + bic tmp1, tmp1, #DDR3PHY_ACIORC_ACPDD + bic tmp1, tmp1, #DDR3PHY_ACIOCR_CKPDD_CK0 + bic tmp1, tmp1, #DDR3PHY_ACIOCR_CSPDD_CS0 + str tmp1, [r3, #DDR3PHY_ACIOCR] + + /* Power up ODT. */ + ldr tmp1, [r3, #DDR3PHY_DSGCR] + bic tmp1, tmp1, #DDR3PHY_DSGCR_ODTPDD_ODT0 + str tmp1, [r3, #DDR3PHY_DSGCR] + + /* Take DDR PHY's DLL out of bypass mode. */ + ldr tmp1, [r3, #DDR3PHY_PIR] + bic tmp1, tmp1, #DDR3PHY_PIR_DLLBYP + str tmp1, [r3, #DDR3PHY_PIR] + + /* Enable quasi-dynamic programming. */ mov tmp1, #0 - mcr p15, 0, tmp1, c7, c10, 4 + str tmp1, [r2, #UDDRC_SWCTRL] + + /* De-assert SDRAM initialization. */ + ldr tmp1, [r2, #UDDRC_DFIMISC] + bic tmp1, tmp1, #UDDRC_DFIMISC_DFI_INIT_COMPLETE_EN + str tmp1, [r2, #UDDRC_DFIMISC] + + /* Quasi-dynamic programming done. */ + mov tmp1, #UDDRC_SWCTRL_SW_DONE + str tmp1, [r2, #UDDRC_SWCTRL] + +sr_dis_1: + ldr tmp1, [r2, #UDDRC_SWSTAT] + tst tmp1, #UDDRC_SWSTAT_SW_DONE_ACK + beq sr_dis_1 + + /* DLL soft-reset + DLL lock wait + ITM reset */ + mov tmp1, #(DDR3PHY_PIR_INIT | DDR3PHY_PIR_DLLSRST | \ + DDR3PHY_PIR_DLLLOCK | DDR3PHY_PIR_ITMSRST) + str tmp1, [r3, #DDR3PHY_PIR] + +sr_dis_4: + /* Wait for it. */ + ldr tmp1, [r3, #DDR3PHY_PGSR] + tst tmp1, #DDR3PHY_PGSR_IDONE + beq sr_dis_4 + + /* Enable quasi-dynamic programming. */ + mov tmp1, #0 + str tmp1, [r2, #UDDRC_SWCTRL] + + /* Assert PHY init complete enable signal. */ + ldr tmp1, [r2, #UDDRC_DFIMISC] + orr tmp1, tmp1, #UDDRC_DFIMISC_DFI_INIT_COMPLETE_EN + str tmp1, [r2, #UDDRC_DFIMISC] + + /* Programming is done. Set sw_done. */ + mov tmp1, #UDDRC_SWCTRL_SW_DONE + str tmp1, [r2, #UDDRC_SWCTRL] + +sr_dis_5: + /* Wait for it. */ + ldr tmp1, [r2, #UDDRC_SWSTAT] + tst tmp1, #UDDRC_SWSTAT_SW_DONE_ACK + beq sr_dis_5 + + /* Trigger self-refresh exit. */ + ldr tmp1, [r2, #UDDRC_PWRCTL] + bic tmp1, tmp1, #UDDRC_PWRCTRL_SELFREF_SW + str tmp1, [r2, #UDDRC_PWRCTL] + +sr_dis_6: + /* Wait for self-refresh exit done. */ + ldr tmp1, [r2, #UDDRC_STAT] + bic tmp1, tmp1, #~UDDRC_STAT_OPMODE_MSK + cmp tmp1, #UDDRC_STAT_OPMODE_NORMAL + bne sr_dis_6 + + /* Enable all AXI ports. */ + ldr tmp1, [r2, #UDDRC_PCTRL_0] + orr tmp1, tmp1, #0x1 + str tmp1, [r2, #UDDRC_PCTRL_0] + + ldr tmp1, [r2, #UDDRC_PCTRL_1] + orr tmp1, tmp1, #0x1 + str tmp1, [r2, #UDDRC_PCTRL_1] + + ldr tmp1, [r2, #UDDRC_PCTRL_2] + orr tmp1, tmp1, #0x1 + str tmp1, [r2, #UDDRC_PCTRL_2] + + ldr tmp1, [r2, #UDDRC_PCTRL_3] + orr tmp1, tmp1, #0x1 + str tmp1, [r2, #UDDRC_PCTRL_3] + + ldr tmp1, [r2, #UDDRC_PCTRL_4] + orr tmp1, tmp1, #0x1 + str tmp1, [r2, #UDDRC_PCTRL_4] - ldr tmp1, [r0, #PM_DATA_PMC] - str tmp1, .pmc_base - ldr tmp1, [r0, #PM_DATA_RAMC0] - str tmp1, .sramc_base - ldr tmp1, [r0, #PM_DATA_RAMC1] - str tmp1, .sramc1_base - ldr tmp1, [r0, #PM_DATA_MEMCTRL] - str tmp1, .memtype - ldr tmp1, [r0, #PM_DATA_MODE] - str tmp1, .pm_mode - ldr tmp1, [r0, #PM_DATA_PMC_MCKR_OFFSET] - str tmp1, .mckr_offset - ldr tmp1, [r0, #PM_DATA_PMC_VERSION] - str tmp1, .pmc_version - /* Both ldrne below are here to preload their address in the TLB */ - ldr tmp1, [r0, #PM_DATA_SHDWC] - str tmp1, .shdwc - cmp tmp1, #0 - ldrne tmp2, [tmp1, #0] - ldr tmp1, [r0, #PM_DATA_SFRBU] - str tmp1, .sfrbu - cmp tmp1, #0 - ldrne tmp2, [tmp1, #0x10] + dsb +.endm +#else +/** + * Enable self-refresh + * + * register usage: + * @r1: memory type + * @r2: base address of the sram controller + * @r3: temporary + */ +.macro at91_sramc_self_refresh_ena + ldr r1, .memtype + ldr r2, .sramc_base - /* Active the self-refresh mode */ - mov r0, #SRAMC_SELF_FRESH_ACTIVE - bl at91_sramc_self_refresh + cmp r1, #AT91_MEMCTRL_MC + bne sr_ena_ddrc_sf - ldr r0, .pm_mode - cmp r0, #AT91_PM_STANDBY - beq standby - cmp r0, #AT91_PM_BACKUP - beq backup_mode + /* Active SDRAM self-refresh mode */ + mov r3, #1 + str r3, [r2, #AT91_MC_SDRAMC_SRR] + b sr_ena_exit - bl at91_ulp_mode - b exit_suspend +sr_ena_ddrc_sf: + cmp r1, #AT91_MEMCTRL_DDRSDR + bne sr_ena_sdramc_sf -standby: - /* Wait for interrupt */ - ldr pmc, .pmc_base - at91_cpu_idle - b exit_suspend + /* + * DDR Memory controller + */ -backup_mode: - bl at91_backup_mode - b exit_suspend + /* LPDDR1 --> force DDR2 mode during self-refresh */ + ldr r3, [r2, #AT91_DDRSDRC_MDR] + str r3, .saved_sam9_mdr + bic r3, r3, #~AT91_DDRSDRC_MD + cmp r3, #AT91_DDRSDRC_MD_LOW_POWER_DDR + ldreq r3, [r2, #AT91_DDRSDRC_MDR] + biceq r3, r3, #AT91_DDRSDRC_MD + orreq r3, r3, #AT91_DDRSDRC_MD_DDR2 + streq r3, [r2, #AT91_DDRSDRC_MDR] -exit_suspend: - /* Exit the self-refresh mode */ - mov r0, #SRAMC_SELF_FRESH_EXIT - bl at91_sramc_self_refresh + /* Active DDRC self-refresh mode */ + ldr r3, [r2, #AT91_DDRSDRC_LPR] + str r3, .saved_sam9_lpr + bic r3, r3, #AT91_DDRSDRC_LPCB + orr r3, r3, #AT91_DDRSDRC_LPCB_SELF_REFRESH + str r3, [r2, #AT91_DDRSDRC_LPR] - /* Restore registers, and return */ - ldmfd sp!, {r4 - r12, pc} -ENDPROC(at91_pm_suspend_in_sram) + /* If using the 2nd ddr controller */ + ldr r2, .sramc1_base + cmp r2, #0 + beq sr_ena_no_2nd_ddrc -ENTRY(at91_backup_mode) - /* Switch the master clock source to slow clock. */ - ldr pmc, .pmc_base - ldr tmp2, .mckr_offset - ldr tmp1, [pmc, tmp2] - bic tmp1, tmp1, #AT91_PMC_CSS - str tmp1, [pmc, tmp2] + ldr r3, [r2, #AT91_DDRSDRC_MDR] + str r3, .saved_sam9_mdr1 + bic r3, r3, #~AT91_DDRSDRC_MD + cmp r3, #AT91_DDRSDRC_MD_LOW_POWER_DDR + ldreq r3, [r2, #AT91_DDRSDRC_MDR] + biceq r3, r3, #AT91_DDRSDRC_MD + orreq r3, r3, #AT91_DDRSDRC_MD_DDR2 + streq r3, [r2, #AT91_DDRSDRC_MDR] - wait_mckrdy + /* Active DDRC self-refresh mode */ + ldr r3, [r2, #AT91_DDRSDRC_LPR] + str r3, .saved_sam9_lpr1 + bic r3, r3, #AT91_DDRSDRC_LPCB + orr r3, r3, #AT91_DDRSDRC_LPCB_SELF_REFRESH + str r3, [r2, #AT91_DDRSDRC_LPR] - /*BUMEN*/ - ldr r0, .sfrbu - mov tmp1, #0x1 - str tmp1, [r0, #0x10] +sr_ena_no_2nd_ddrc: + b sr_ena_exit - /* Shutdown */ - ldr r0, .shdwc - mov tmp1, #0xA5000000 - add tmp1, tmp1, #0x1 - str tmp1, [r0, #0] -ENDPROC(at91_backup_mode) + /* + * SDRAMC Memory controller + */ +sr_ena_sdramc_sf: + /* Active SDRAMC self-refresh mode */ + ldr r3, [r2, #AT91_SDRAMC_LPR] + str r3, .saved_sam9_lpr + bic r3, r3, #AT91_SDRAMC_LPCB + orr r3, r3, #AT91_SDRAMC_LPCB_SELF_REFRESH + str r3, [r2, #AT91_SDRAMC_LPR] + + ldr r3, .saved_sam9_lpr + str r3, [r2, #AT91_SDRAMC_LPR] + +sr_ena_exit: +.endm + +/** + * Disable self-refresh + * + * register usage: + * @r1: memory type + * @r2: base address of the sram controller + * @r3: temporary + */ +.macro at91_sramc_self_refresh_dis + ldr r1, .memtype + ldr r2, .sramc_base + + cmp r1, #AT91_MEMCTRL_MC + bne sr_dis_ddrc_exit_sf + + /* + * at91rm9200 Memory controller + */ + + /* + * For exiting the self-refresh mode, do nothing, + * automatically exit the self-refresh mode. + */ + b sr_dis_exit + +sr_dis_ddrc_exit_sf: + cmp r1, #AT91_MEMCTRL_DDRSDR + bne sdramc_exit_sf + + /* DDR Memory controller */ + + /* Restore MDR in case of LPDDR1 */ + ldr r3, .saved_sam9_mdr + str r3, [r2, #AT91_DDRSDRC_MDR] + /* Restore LPR on AT91 with DDRAM */ + ldr r3, .saved_sam9_lpr + str r3, [r2, #AT91_DDRSDRC_LPR] + + /* If using the 2nd ddr controller */ + ldr r2, .sramc1_base + cmp r2, #0 + ldrne r3, .saved_sam9_mdr1 + strne r3, [r2, #AT91_DDRSDRC_MDR] + ldrne r3, .saved_sam9_lpr1 + strne r3, [r2, #AT91_DDRSDRC_LPR] + + b sr_dis_exit + +sdramc_exit_sf: + /* SDRAMC Memory controller */ + ldr r3, .saved_sam9_lpr + str r3, [r2, #AT91_SDRAMC_LPR] + +sr_dis_exit: +.endm +#endif .macro at91_pm_ulp0_mode ldr pmc, .pmc_base @@ -176,7 +467,9 @@ ENDPROC(at91_backup_mode) bic tmp1, tmp1, #AT91_PMC_PRES orr tmp1, tmp1, #AT91_PMC_PRES_64 str tmp1, [pmc, tmp3] - wait_mckrdy + + mov tmp3, #0 + wait_mckrdy tmp3 b 1f 0: @@ -212,10 +505,13 @@ ENDPROC(at91_backup_mode) bne 5f /* Set lowest prescaler for fast resume. */ + ldr tmp3, .mckr_offset ldr tmp1, [pmc, tmp3] bic tmp1, tmp1, #AT91_PMC_PRES str tmp1, [pmc, tmp3] - wait_mckrdy + + mov tmp3, #0 + wait_mckrdy tmp3 b 6f 5: /* Restore RC oscillator state */ @@ -252,6 +548,7 @@ ENDPROC(at91_backup_mode) .macro at91_pm_ulp1_mode ldr pmc, .pmc_base ldr tmp2, .mckr_offset + mov tmp3, #0 /* Save RC oscillator state and check if it is enabled. */ ldr tmp1, [pmc, #AT91_PMC_SR] @@ -293,7 +590,7 @@ ENDPROC(at91_backup_mode) orr tmp1, tmp1, #AT91_PMC_CSS_MAIN str tmp1, [pmc, tmp2] - wait_mckrdy + wait_mckrdy tmp3 /* Enter the ULP1 mode by set WAITMODE bit in CKGR_MOR */ ldr tmp1, [pmc, #AT91_CKGR_MOR] @@ -306,7 +603,7 @@ ENDPROC(at91_backup_mode) nop nop - wait_mckrdy + wait_mckrdy tmp3 /* Enable the crystal oscillator */ ldr tmp1, [pmc, #AT91_CKGR_MOR] @@ -322,7 +619,7 @@ ENDPROC(at91_backup_mode) bic tmp1, tmp1, #AT91_PMC_CSS str tmp1, [pmc, tmp2] - wait_mckrdy + wait_mckrdy tmp3 /* Switch main clock source to crystal oscillator */ ldr tmp1, [pmc, #AT91_CKGR_MOR] @@ -339,7 +636,7 @@ ENDPROC(at91_backup_mode) orr tmp1, tmp1, #AT91_PMC_CSS_MAIN str tmp1, [pmc, tmp2] - wait_mckrdy + wait_mckrdy tmp3 /* Restore RC oscillator state */ ldr tmp1, .saved_osc_status @@ -367,7 +664,7 @@ ENDPROC(at91_backup_mode) cmp tmp1, #AT91_PMC_V1 beq 1f -#ifdef CONFIG_SOC_SAM9X60 +#ifdef CONFIG_HAVE_AT91_SAM9X60_PLL /* Save PLLA settings. */ ldr tmp2, [pmc, #AT91_PMC_PLL_UPDT] bic tmp2, tmp2, #AT91_PMC_PLL_UPDT_ID @@ -434,7 +731,7 @@ ENDPROC(at91_backup_mode) cmp tmp3, #AT91_PMC_V1 beq 4f -#ifdef CONFIG_SOC_SAM9X60 +#ifdef CONFIG_HAVE_AT91_SAM9X60_PLL /* step 1. */ ldr tmp1, [pmc, #AT91_PMC_PLL_UPDT] bic tmp1, tmp1, #AT91_PMC_PLL_UPDT_ID @@ -497,7 +794,122 @@ ENDPROC(at91_backup_mode) 2: .endm -ENTRY(at91_ulp_mode) +/** + * at91_mckx_ps_enable: save MCK1..4 settings and switch it to main clock + * + * Side effects: overwrites tmp1, tmp2 + */ +.macro at91_mckx_ps_enable +#ifdef CONFIG_SOC_SAMA7 + ldr pmc, .pmc_base + + /* There are 4 MCKs we need to handle: MCK1..4 */ + mov tmp1, #1 +e_loop: cmp tmp1, #5 + beq e_done + + /* Write MCK ID to retrieve the settings. */ + str tmp1, [pmc, #AT91_PMC_MCR_V2] + ldr tmp2, [pmc, #AT91_PMC_MCR_V2] + +e_save_mck1: + cmp tmp1, #1 + bne e_save_mck2 + str tmp2, .saved_mck1 + b e_ps + +e_save_mck2: + cmp tmp1, #2 + bne e_save_mck3 + str tmp2, .saved_mck2 + b e_ps + +e_save_mck3: + cmp tmp1, #3 + bne e_save_mck4 + str tmp2, .saved_mck3 + b e_ps + +e_save_mck4: + str tmp2, .saved_mck4 + +e_ps: + /* Use CSS=MAINCK and DIV=1. */ + bic tmp2, tmp2, #AT91_PMC_MCR_V2_CSS + bic tmp2, tmp2, #AT91_PMC_MCR_V2_DIV + orr tmp2, tmp2, #AT91_PMC_MCR_V2_CSS_MAINCK + orr tmp2, tmp2, #AT91_PMC_MCR_V2_DIV1 + str tmp2, [pmc, #AT91_PMC_MCR_V2] + + wait_mckrdy tmp1 + + add tmp1, tmp1, #1 + b e_loop + +e_done: +#endif +.endm + +/** + * at91_mckx_ps_restore: restore MCK1..4 settings + * + * Side effects: overwrites tmp1, tmp2 + */ +.macro at91_mckx_ps_restore +#ifdef CONFIG_SOC_SAMA7 + ldr pmc, .pmc_base + + /* There are 4 MCKs we need to handle: MCK1..4 */ + mov tmp1, #1 +r_loop: cmp tmp1, #5 + beq r_done + +r_save_mck1: + cmp tmp1, #1 + bne r_save_mck2 + ldr tmp2, .saved_mck1 + b r_ps + +r_save_mck2: + cmp tmp1, #2 + bne r_save_mck3 + ldr tmp2, .saved_mck2 + b r_ps + +r_save_mck3: + cmp tmp1, #3 + bne r_save_mck4 + ldr tmp2, .saved_mck3 + b r_ps + +r_save_mck4: + ldr tmp2, .saved_mck4 + +r_ps: + /* Write MCK ID to retrieve the settings. */ + str tmp1, [pmc, #AT91_PMC_MCR_V2] + ldr tmp3, [pmc, #AT91_PMC_MCR_V2] + + /* We need to restore CSS and DIV. */ + bic tmp3, tmp3, #AT91_PMC_MCR_V2_CSS + bic tmp3, tmp3, #AT91_PMC_MCR_V2_DIV + orr tmp3, tmp3, tmp2 + bic tmp3, tmp3, #AT91_PMC_MCR_V2_ID_MSK + orr tmp3, tmp3, tmp1 + orr tmp3, tmp3, #AT91_PMC_MCR_V2_CMD + str tmp2, [pmc, #AT91_PMC_MCR_V2] + + wait_mckrdy tmp1 + + add tmp1, tmp1, #1 + b r_loop +r_done: +#endif +.endm + +.macro at91_ulp_mode + at91_mckx_ps_enable + ldr pmc, .pmc_base ldr tmp2, .mckr_offset ldr tmp3, .pm_mode @@ -518,10 +930,15 @@ ENTRY(at91_ulp_mode) save_mck: str tmp1, [pmc, tmp2] - wait_mckrdy + mov tmp3, #0 + wait_mckrdy tmp3 at91_plla_disable + /* Enable low power mode for 2.5V regulator. */ + at91_2_5V_reg_set_low_power 1 + + ldr tmp3, .pm_mode cmp tmp3, #AT91_PM_ULP1 beq ulp1_mode @@ -533,6 +950,9 @@ ulp1_mode: b ulp_exit ulp_exit: + /* Disable low power mode for 2.5V regulator. */ + at91_2_5V_reg_set_low_power 0 + ldr pmc, .pmc_base at91_plla_enable @@ -544,135 +964,110 @@ ulp_exit: ldr tmp2, .saved_mckr str tmp2, [pmc, tmp1] - wait_mckrdy - - mov pc, lr -ENDPROC(at91_ulp_mode) + mov tmp3, #0 + wait_mckrdy tmp3 -/* - * void at91_sramc_self_refresh(unsigned int is_active) - * - * @input param: - * @r0: 1 - active self-refresh mode - * 0 - exit self-refresh mode - * register usage: - * @r1: memory type - * @r2: base address of the sram controller - */ - -ENTRY(at91_sramc_self_refresh) - ldr r1, .memtype - ldr r2, .sramc_base - - cmp r1, #AT91_MEMCTRL_MC - bne ddrc_sf - - /* - * at91rm9200 Memory controller - */ - - /* - * For exiting the self-refresh mode, do nothing, - * automatically exit the self-refresh mode. - */ - tst r0, #SRAMC_SELF_FRESH_ACTIVE - beq exit_sramc_sf - - /* Active SDRAM self-refresh mode */ - mov r3, #1 - str r3, [r2, #AT91_MC_SDRAMC_SRR] - b exit_sramc_sf + at91_mckx_ps_restore +.endm -ddrc_sf: - cmp r1, #AT91_MEMCTRL_DDRSDR - bne sdramc_sf +.macro at91_backup_mode + /* Switch the master clock source to slow clock. */ + ldr pmc, .pmc_base + ldr tmp2, .mckr_offset + ldr tmp1, [pmc, tmp2] + bic tmp1, tmp1, #AT91_PMC_CSS + str tmp1, [pmc, tmp2] - /* - * DDR Memory controller - */ - tst r0, #SRAMC_SELF_FRESH_ACTIVE - beq ddrc_exit_sf + mov tmp3, #0 + wait_mckrdy tmp3 - /* LPDDR1 --> force DDR2 mode during self-refresh */ - ldr r3, [r2, #AT91_DDRSDRC_MDR] - str r3, .saved_sam9_mdr - bic r3, r3, #~AT91_DDRSDRC_MD - cmp r3, #AT91_DDRSDRC_MD_LOW_POWER_DDR - ldreq r3, [r2, #AT91_DDRSDRC_MDR] - biceq r3, r3, #AT91_DDRSDRC_MD - orreq r3, r3, #AT91_DDRSDRC_MD_DDR2 - streq r3, [r2, #AT91_DDRSDRC_MDR] + /*BUMEN*/ + ldr r0, .sfrbu + mov tmp1, #0x1 + str tmp1, [r0, #0x10] - /* Active DDRC self-refresh mode */ - ldr r3, [r2, #AT91_DDRSDRC_LPR] - str r3, .saved_sam9_lpr - bic r3, r3, #AT91_DDRSDRC_LPCB - orr r3, r3, #AT91_DDRSDRC_LPCB_SELF_REFRESH - str r3, [r2, #AT91_DDRSDRC_LPR] + /* Wait for it. */ +1: ldr tmp1, [r0, #0x10] + tst tmp1, #0x1 + beq 1b - /* If using the 2nd ddr controller */ - ldr r2, .sramc1_base - cmp r2, #0 - beq no_2nd_ddrc + /* Shutdown */ + ldr r0, .shdwc + mov tmp1, #0xA5000000 + add tmp1, tmp1, #0x1 + at91_backup_set_lpm tmp1 + str tmp1, [r0, #0] +.endm - ldr r3, [r2, #AT91_DDRSDRC_MDR] - str r3, .saved_sam9_mdr1 - bic r3, r3, #~AT91_DDRSDRC_MD - cmp r3, #AT91_DDRSDRC_MD_LOW_POWER_DDR - ldreq r3, [r2, #AT91_DDRSDRC_MDR] - biceq r3, r3, #AT91_DDRSDRC_MD - orreq r3, r3, #AT91_DDRSDRC_MD_DDR2 - streq r3, [r2, #AT91_DDRSDRC_MDR] +/* + * void at91_suspend_sram_fn(struct at91_pm_data*) + * @input param: + * @r0: base address of struct at91_pm_data + */ +/* at91_pm_suspend_in_sram must be 8-byte aligned per the requirements of fncpy() */ + .align 3 +ENTRY(at91_pm_suspend_in_sram) + /* Save registers on stack */ + stmfd sp!, {r4 - r12, lr} - /* Active DDRC self-refresh mode */ - ldr r3, [r2, #AT91_DDRSDRC_LPR] - str r3, .saved_sam9_lpr1 - bic r3, r3, #AT91_DDRSDRC_LPCB - orr r3, r3, #AT91_DDRSDRC_LPCB_SELF_REFRESH - str r3, [r2, #AT91_DDRSDRC_LPR] + /* Drain write buffer */ + mov tmp1, #0 + mcr p15, 0, tmp1, c7, c10, 4 -no_2nd_ddrc: - b exit_sramc_sf + ldr tmp1, [r0, #PM_DATA_PMC] + str tmp1, .pmc_base + ldr tmp1, [r0, #PM_DATA_RAMC0] + str tmp1, .sramc_base + ldr tmp1, [r0, #PM_DATA_RAMC1] + str tmp1, .sramc1_base + ldr tmp1, [r0, #PM_DATA_RAMC_PHY] + str tmp1, .sramc_phy_base + ldr tmp1, [r0, #PM_DATA_MEMCTRL] + str tmp1, .memtype + ldr tmp1, [r0, #PM_DATA_MODE] + str tmp1, .pm_mode + ldr tmp1, [r0, #PM_DATA_PMC_MCKR_OFFSET] + str tmp1, .mckr_offset + ldr tmp1, [r0, #PM_DATA_PMC_VERSION] + str tmp1, .pmc_version + /* Both ldrne below are here to preload their address in the TLB */ + ldr tmp1, [r0, #PM_DATA_SHDWC] + str tmp1, .shdwc + cmp tmp1, #0 + ldrne tmp2, [tmp1, #0] + ldr tmp1, [r0, #PM_DATA_SFRBU] + str tmp1, .sfrbu + cmp tmp1, #0 + ldrne tmp2, [tmp1, #0x10] -ddrc_exit_sf: - /* Restore MDR in case of LPDDR1 */ - ldr r3, .saved_sam9_mdr - str r3, [r2, #AT91_DDRSDRC_MDR] - /* Restore LPR on AT91 with DDRAM */ - ldr r3, .saved_sam9_lpr - str r3, [r2, #AT91_DDRSDRC_LPR] + /* Active the self-refresh mode */ + at91_sramc_self_refresh_ena - /* If using the 2nd ddr controller */ - ldr r2, .sramc1_base - cmp r2, #0 - ldrne r3, .saved_sam9_mdr1 - strne r3, [r2, #AT91_DDRSDRC_MDR] - ldrne r3, .saved_sam9_lpr1 - strne r3, [r2, #AT91_DDRSDRC_LPR] + ldr r0, .pm_mode + cmp r0, #AT91_PM_STANDBY + beq standby + cmp r0, #AT91_PM_BACKUP + beq backup_mode - b exit_sramc_sf + at91_ulp_mode + b exit_suspend - /* - * SDRAMC Memory controller - */ -sdramc_sf: - tst r0, #SRAMC_SELF_FRESH_ACTIVE - beq sdramc_exit_sf +standby: + /* Wait for interrupt */ + ldr pmc, .pmc_base + at91_cpu_idle + b exit_suspend - /* Active SDRAMC self-refresh mode */ - ldr r3, [r2, #AT91_SDRAMC_LPR] - str r3, .saved_sam9_lpr - bic r3, r3, #AT91_SDRAMC_LPCB - orr r3, r3, #AT91_SDRAMC_LPCB_SELF_REFRESH - str r3, [r2, #AT91_SDRAMC_LPR] +backup_mode: + at91_backup_mode -sdramc_exit_sf: - ldr r3, .saved_sam9_lpr - str r3, [r2, #AT91_SDRAMC_LPR] +exit_suspend: + /* Exit the self-refresh mode */ + at91_sramc_self_refresh_dis -exit_sramc_sf: - mov pc, lr -ENDPROC(at91_sramc_self_refresh) + /* Restore registers, and return */ + ldmfd sp!, {r4 - r12, pc} +ENDPROC(at91_pm_suspend_in_sram) .pmc_base: .word 0 @@ -680,6 +1075,8 @@ ENDPROC(at91_sramc_self_refresh) .word 0 .sramc1_base: .word 0 +.sramc_phy_base: + .word 0 .shdwc: .word 0 .sfrbu: @@ -706,6 +1103,16 @@ ENDPROC(at91_sramc_self_refresh) .word 0 .saved_osc_status: .word 0 +#ifdef CONFIG_SOC_SAMA7 +.saved_mck1: + .word 0 +.saved_mck2: + .word 0 +.saved_mck3: + .word 0 +.saved_mck4: + .word 0 +#endif ENTRY(at91_pm_suspend_in_sram_sz) .word .-at91_pm_suspend_in_sram |