diff options
Diffstat (limited to 'arch/arm/boot/dts/marvell/kirkwood-topkick.dts')
-rw-r--r-- | arch/arm/boot/dts/marvell/kirkwood-topkick.dts | 216 |
1 files changed, 216 insertions, 0 deletions
diff --git a/arch/arm/boot/dts/marvell/kirkwood-topkick.dts b/arch/arm/boot/dts/marvell/kirkwood-topkick.dts new file mode 100644 index 000000000000..a5b51e29f63e --- /dev/null +++ b/arch/arm/boot/dts/marvell/kirkwood-topkick.dts @@ -0,0 +1,216 @@ +// SPDX-License-Identifier: GPL-2.0 +/dts-v1/; + +#include "kirkwood.dtsi" +#include "kirkwood-6282.dtsi" + +/ { + model = "Universal Scientific Industrial Co. Topkick-1281P2"; + compatible = "usi,topkick-1281P2", "usi,topkick", "marvell,kirkwood-88f6282", "marvell,kirkwood"; + + memory { + device_type = "memory"; + reg = <0x00000000 0x10000000>; + }; + + chosen { + bootargs = "console=ttyS0,115200n8 earlyprintk"; + stdout-path = &uart0; + }; + + ocp@f1000000 { + pinctrl: pin-controller@10000 { + /* + * Switch positions + * + * /-SW_LEFT(2) + * | + * | /-SW_IDLE + * | | + * | | /-SW_RIGHT + * | | | + * PS [L] [I] [R] LEDS + */ + pinctrl-0 = <&pmx_sw_left &pmx_sw_right + &pmx_sw_idle &pmx_sw_left2>; + pinctrl-names = "default"; + + pmx_led_disk_yellow: pmx-led-disk-yellow { + marvell,pins = "mpp21"; + marvell,function = "gpio"; + }; + + pmx_sata0_pwr_enable: pmx-sata0-pwr-enable { + marvell,pins = "mpp36"; + marvell,function = "gpio"; + }; + + pmx_led_sys_red: pmx-led-sys-red { + marvell,pins = "mpp37"; + marvell,function = "gpio"; + }; + + pmx_led_sys_blue: pmx-led-sys-blue { + marvell,pins = "mpp38"; + marvell,function = "gpio"; + }; + + pmx_led_wifi_green: pmx-led-wifi-green { + marvell,pins = "mpp39"; + marvell,function = "gpio"; + }; + + pmx_sw_left: pmx-sw-left { + marvell,pins = "mpp43"; + marvell,function = "gpio"; + }; + + pmx_sw_right: pmx-sw-right { + marvell,pins = "mpp44"; + marvell,function = "gpio"; + }; + + pmx_sw_idle: pmx-sw-idle { + marvell,pins = "mpp45"; + marvell,function = "gpio"; + }; + + pmx_sw_left2: pmx-sw-left2 { + marvell,pins = "mpp46"; + marvell,function = "gpio"; + }; + + pmx_led_wifi_yellow: pmx-led-wifi-yellow { + marvell,pins = "mpp48"; + marvell,function = "gpio"; + }; + }; + + serial@12000 { + status = "okay"; + }; + + sata@80000 { + status = "okay"; + nr-ports = <1>; + }; + + i2c@11000 { + status = "okay"; + }; + + mvsdio@90000 { + pinctrl-0 = <&pmx_sdio>; + pinctrl-names = "default"; + status = "okay"; + /* No CD or WP GPIOs */ + broken-cd; + }; + }; + + gpio-leds { + /* + * GPIO LED layout + * + * /-SYS_LED(2) + * | + * | /-DISK_LED + * | | + * | | /-WLAN_LED(2) + * | | | + * [SW] [*] [*] [*] + */ + + compatible = "gpio-leds"; + pinctrl-0 = <&pmx_led_disk_yellow &pmx_led_sys_red + &pmx_led_sys_blue &pmx_led_wifi_green + &pmx_led_wifi_yellow>; + pinctrl-names = "default"; + + disk { + label = "topkick:yellow:disk"; + gpios = <&gpio0 21 GPIO_ACTIVE_LOW>; + linux,default-trigger = "disk-activity"; + }; + system2 { + label = "topkick:red:system"; + gpios = <&gpio1 5 GPIO_ACTIVE_LOW>; + }; + system { + label = "topkick:blue:system"; + gpios = <&gpio1 6 GPIO_ACTIVE_LOW>; + default-state = "on"; + }; + wifi { + label = "topkick:green:wifi"; + gpios = <&gpio1 7 GPIO_ACTIVE_LOW>; + }; + wifi2 { + label = "topkick:yellow:wifi"; + gpios = <&gpio1 16 GPIO_ACTIVE_LOW>; + }; + }; + regulators { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <0>; + pinctrl-0 = <&pmx_sata0_pwr_enable>; + pinctrl-names = "default"; + + sata0_power: regulator@1 { + compatible = "regulator-fixed"; + reg = <1>; + regulator-name = "SATA0 Power"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + enable-active-high; + regulator-always-on; + regulator-boot-on; + gpio = <&gpio1 4 0>; + }; + }; +}; + +&nand { + status = "okay"; + + partition@0 { + label = "u-boot"; + reg = <0x0000000 0x180000>; + }; + + partition@180000 { + label = "u-boot env"; + reg = <0x0180000 0x20000>; + }; + + partition@200000 { + label = "uImage"; + reg = <0x0200000 0x600000>; + }; + + partition@800000 { + label = "uInitrd"; + reg = <0x0800000 0x1000000>; + }; + + partition@1800000 { + label = "rootfs"; + reg = <0x1800000 0xe800000>; + }; +}; + +&mdio { + status = "okay"; + + ethphy0: ethernet-phy@0 { + reg = <0>; + }; +}; + +ð0 { + status = "okay"; + ethernet0-port@0 { + phy-handle = <ðphy0>; + }; +}; |